stride family kits ordering information - microsoft family... · stride family kits ordering...

Stride Family Kits Ordering Information

Maximize Your OptionsMaximize Your Outcomes

PreStride™ FullStride™ SafetyStride™ Stride4™

1 To order 800-521-2192 • 248-588-7480 2To order 800-521-2192 • 248-588-7480

Step into the Stride Family

PreStride™

PreStride Stance Control Assessment OrthosisOrder No. Side

9007-R Right9007-L Left9007-P Pair

PreStride4 Stance Control Assessment OrthosisOrder No. Side

9008-R Right9008-L Left9008-P Pair

The PreStride4, model 9008 is the same as model 9007, except it utilizes our new Stride4 (Patent Pending) stance control knee joints. The Stride4 is comprised of a four bar linkage mechanism that offers (3) modes of operation: Stance control, free motion and locked with stance phase flexion. An integral extension assist spring housed within the midsection assists with knee extension, while an adjustable extension stop allows the practitioner to adjust and fine tune the point at which the joint enters into its stable/locked state. A button on the Stride4 knee joint allows the practitioner to switch between stance control and locked modes of operation. When the lock option is selected and engaged by the clinician, the joint will allow approximately 3° of flexion to provide some shock absorption to the patient.

An additional advantage of the PreStride4 is that it may be used as an effective gait training tool during rehabilitation.

PreStride

The PreStride is an evaluation tool that may be used in combination with a physical examination to assess candidacy for Stride stance control orthotic management. The PreStride is a modular and fully adjustable stance control KAFO that may be fitted to most adults who are between 5’ 2” and 6’ 2” in height. The overall height of the orthosis is easily adjusted by releasing the spring loaded knobs located on the medial and lateral uprights. Calf and thigh bands are also easily adjusted for varying A-P depths.

The PreStride, model 9007, comes with FullStride™ stance control knee joints and an optional GX-Assist unit to accommodate individuals with significant weakness of hip musculature. The GX-Assist uses a pneumatic spring to assist in knee extension by mimicking the swing phase function of the quadriceps muscle group. Model 9007 also offers interchangeability with the SafetyStride™ stance control knee joint (sold separately), which has the ability of resisting knee flexion at any angle and does not require full 180° knee extension in order to lock.

An additional advantage of the PreStride is that it may be used as an effective gait training tool during rehabilitation.

4™

Optional SafetyStride Knee Joint MidsectionOrder No. Description Side

9005-A6MS-R-PRESTRIDE SafetyStride Midsection Right9005-A6MS-L-PRESTRIDE SafetyStride Midsection Left

4To order 800-521-2192 • 248-588-7480 3 To order 800-521-2192 • 248-588-7480 To order 800-521-2192 • 248-588-7480 4

FullStride™ A Size

FullStride A Size Kit with Heel Cable Receptor

Order No.Joint Size

UprightDimensions Upright Material

9006-A6 A 3/16” x 3/4” Aluminum9006-A6S A 3/16” x 3/4” Stainless Steel9006-A6TI A 3/16” x 3/4” Titanium

FullStride A Size Kit with Heel Cable Receptor and GX-Assist

Order No.Joint Size

UprightDimensions Upright Material Side

9006-GX-A6-R-X A 3/16” x 3/4” Aluminum Right9006-GX-A6S-R-X A 3/16” x 3/4” Stainless Steel Right9006-GX-A6TI-R-X A 3/16” x 3/4” Titanium Right9006-GX-A6-L-X A 3/16” x 3/4” Aluminum Left9006-GX-A6S-L-X A 3/16” x 3/4” Stainless Steel Left9006-GX-A6TI-L-X A 3/16” x 3/4” Titanium Left

The “X” in the part numbers listed above refer to the GX-Assist option you wish to be included with your kit. GX-Assist units are available in 75N, 125N and 175N. For example, to order a FullStride kit with aluminum uprights and a 125N GX-Assist for the right leg, your order number would be 9006-GX-A6-R-125.

FullStride A Size Kit with Y Stance Control Stirrups and Modular Double Action Ankle Joints

Order No.Joint Size


SCSY-9006-A6 A 3/16” x 3/4” AluminumSCSY-9006-A6S A 3/16” x 3/4” Stainless SteelSCSY-9006-A6TI A 3/16” x 3/4” Titanium

Molding dummies are available for the FullStride and SafetyStride. Both systems utilize the same, universal, nylon molding dummy, which can be used on the right or left side. Sold individually.

The FullStride is a mechanical stance control orthotic knee joint that utilizes a low-profile cabling system to automatically unlock at the end of stance phase. At the end of swing phase, when the orthotic knee joint reaches full extension, the locking mechanism re-engages to provide knee stability for stance phase.

FullStride Molding Dummy

Order No. Descritpion9006-MD-A FullStride A Size Molding Dummy

A Heel Cable Receptor


B GX-Assist

A Y-Stirrup

B Double Action Ankle Joints

References the difference in component selection in each kit.

5 To order 800-521-2192 • 248-588-7480 6To order 800-521-2192 • 248-588-7480

FullStride A Size Kit with Stance Control Stirrup and Modular Double Action Ankle Joints

Order No.Joint Size


SCSX-9006-A6 A 3/16” x 3/4” AluminumSCSX-9006-A6S A 3/16” x 3/4” Stainless Steel

SCSX-9006-A6TI A 3/16” x 3/4” TitaniumThe “X” in the part number listed above refers to the stirrup size you wish to be included with your kit. Stirrups are available in 9”, 10” and 11” lengths. For example to order a FullStride kit with aluminum uprights and a 9” stirrup, your order number would be SCS9-9006-A6.

FullStride A Size Kit with Stance Control Stirrup, Modular Double Action Ankle Joints and GX-Assist

Order No.Joint Size


SCSX-9006-GX-A6-R-X A 3/16” x 3/4” Aluminum RightSCSX-9006-GX-A6S-R-X A 3/16” x 3/4” Stainless Steel RightSCSX-9006-GX-A6TI-R-X A 3/16” x 3/4” Titanium RightSCSX-9006-GX-A6-L-X A 3/16” x 3/4” Aluminum LeftSCSX-9006-GX-A6S-L-X A 3/16” x 3/4” Stainless Steel LeftSCSX-9006-GX-A6TI-L-X A 3/16” x 3/4” Titanium Left

The “X’s” in the part numbers listed above refer to the stirrup size and the GX-Assist option you wish to be included with your kit. Stirrups are available in 9”, 10” and 11” lengths and GX-Assist units are available in 75N, 125N and 175N. For example, to order a FullStride kit with aluminum uprights, 9” stirrup, and a 125N GX-Assist for the right leg, your order number would be SCS9-9006-GX-A6-R-125.

FullStride A Size Kit with Y Stance Control Stirrups, Modular Double Action Ankle Joints and GX-Assist

Order No.Joint Size


SCSY-9006-GX-A6-R-X A 3/16” x 3/4” Aluminum RightSCSY-9006-GX-A6S-R-X A 3/16” x 3/4” Stainless Steel RightSCSY-9006-GX-A6TI-R-X A 3/16” x 3/4” Titanium RightSCSY-9006-GX-A6-L-X A 3/16” x 3/4” Aluminum LeftSCSY-9006-GX-A6S-L-X A 3/16” x 3/4” Stainless Steel LeftSCSY-9006-GX-A6TI-L-X A 3/16” x 3/4” Titanium Left

The “X” in the part numbers listed above refer to the GX-Assist option you wish to be included with your kit. GX-Assist units are available in 75N, 125N and 175N. For example to order a FullStride kit with Y stirrups, aluminum uprights and a 125N GX-Assist for the right leg, your order number would be SCSY-9006-GX-A6-R-125.

Order No. Description322 FullStride KAFO - A Size322-GX FullStride KAFO w/ GX-Assist - A Size322-PP PrePreg FullStride KAFO - A Size322-GX-PP PrePreg FullStride KAFO w/ GX-Assist - A Size

FullStride™ A Size Custom KAFO’s

A Y-Stirrup

B GX-Assist

C Double Action Ankle Joints

A Stirrup


A Stirrup

B GX-Assist


7 To order 800-521-2192 • 248-588-7480 8To order 800-521-2192 • 248-588-7480

FullStride™ B Size

FullStride B Size Kit with Heel Cable Receptor and GX-Assist

Order No.Joint Size


9006-GX-B6-R-X B 3/16” x 5/8” Aluminum Right9006-GX-B6S-R-X B 3/16” x 5/8” Stainless Steel Right9006-GX-B6-L-X B 3/16” x 5/8” Aluminum Left9006-GX-B6S-L-X B 3/16” x 5/8” Stainless Steel Left

The “X” in the part numbers listed above refer to the GX-Assist option you wish to be included with your kit. GX-Assist units are available in 75N, 125N and 175N. For example, to order a FullStride kit with aluminum uprights and a 125N GX-Assist for the right leg, your order number would be 9006-GX-B6-R-125.

FullStride B Size Kit with Y Stance Control Stirrups and Modular Double Action Ankle Joints

Order No.Joint Size


SCSY-9006-B6 B 3/16” x 5/8” AluminumSCSY-9006-B6S B 3/16” x 5/8” Stainless Steel

The FullStride is also available in our “B,” or youth size for smaller adults and adolescents. Offering a 25% reduction in weight to enhance the clinical application, the “B” size FullStride gives you additional possibilities in offering stance control to your patients.

The FullStride is a mechanical stance control orthotic knee joint that utilizes a low-profile cabling system to automatically unlock at the end of stance phase. At the end of swing phase, when the orthotic knee joint reaches full extension, the locking mechanism re-engages to provide knee stability for stance phase.


B GX-Assist

A Y-Stirrup


FullStride B Size Kit with Heel Cable Receptor

Order No.Joint Size


9006-B6 B 3/16” x 5/8” Aluminum9006-B6S B 3/16” x 5/8” Stainless Steel



9 To order 800-521-2192 • 248-588-7480 10To order 800-521-2192 • 248-588-7480

FullStride B Size Kit with Stance Control Stirrup and Modular Double Action Ankle Joints

Order No.Joint Size


SCSX-9006-B6 B 3/16” x 5/8” AluminumSCSX-9006-B6S B 3/16” x 5/8” Stainless Steel

FullStride B Size Kit with Stance Control Stirrup, Modular Double Action Ankle Joints and GX-Assist

Order No.Joint Size


SCSX-9006-GX-B6-R-X B 3/16” x 5/8” Aluminum RightSCSX-9006-GX-B6S-R-X B 3/16” x 5/8” Stainless Steel RightSCSX-9006-GX-B6-L-X B 3/16” x 5/8” Aluminum LeftSCSX-9006-GX-B6S-L-X B 3/16” x 5/8” Stainless Steel Left

The “X’s” in the part numbers listed above refer to the stirrup size and the GX-Assist option you wish to be included with your kit. Stirrups are available in 9”, 10” and 11” lengths and GX-Assist units are available in 75N, 125N and 175N. For example, to order a FullStride kit with aluminum uprights, 9” stirrup, and a 125N GX-Assist for a right leg, your order number would be SCS9-9006-GX-B6-R-125.

FullStride B Size Kit with Y Stance Control Stirrups, Modular Double Action Ankle Joints and GX-Assist

Order No.Joint Size


SCSY-9006-GX-B6-R-X B 3/16” x 5/8” Aluminum RightSCSY-9006-GX-B6S-R-X B 3/16” x 5/8” Stainless Steel RightSCSY-9006-GX-B6-L-X B 3/16” x 5/8” Aluminum LeftSCSY-9006-GX-B6S-L-X B 3/16” x 5/8” Stainless Steel Left

The “X” in the part numbers listed above refer to the GX-Assist option you wish to be included with your kit. GX-Assist units are available in 75N, 125N and 175N. For example, to order a FullStride kit with Y stirrups, aluminum uprights and a 125N GX-Assist for the right leg, your order number would be SCSY-9006-GX-B6-R-125.

Order No. Description322-B FullStride KAFO - B Size

322-GX-B FullStride KAFO w/ GX-Assist - B Size322-PP-B PrePreg FullStride KAFO - B Size

322-GX-PP-B PrePreg FullStride KAFO w/ GX-Assist - B Size

FullStride™ B Size Custom KAFO’s

The “X” in the part numbers listed above refer to the stirrup size you wish to be included with your kit. Stirrups are available in 9”, 10” and 11” lengths. For example, to order a FullStride kit with aluminum uprights and a 9” stirrup, your order number would be SCS9-9006-B6.

A Stirrup

B GX-Assist


A Y-Stirrup

B GX-Assist


A Stirrup


11 To order 800-521-2192 • 248-588-7480 12To order 800-521-2192 • 248-588-7480

SafetyStride™

Molding dummies are available for the FullStride and SafetyStride. Both systems utilize the same, universal, nylon molding dummy, which can be used on the right or left side. Sold individually.

SafetyStride Kit with Heel Cable Receptor

Order No.Joint Size


9005-A6-R A 3/16” x 3/4” Aluminum Right9005-A6S-R A 3/16” x 3/4” Stainless Steel Right9005-A6TI-R A 3/16” x 3/4” Titanium Right9005-A6-L A 3/16” x 3/4” Aluminum Left9005-A6S-L A 3/16” x 3/4” Stainless Steel Left9005-A6TI-L A 3/16” x 3/4” Titanium Left

SafetyStride Kit with Heel Cable Receptor and GX-Assist

Order No.Joint Size


9005-GX-A6-R-X A 3/16” x 3/4” Aluminum Right9005-GX-A6S-R-X A 3/16” x 3/4” Stainless Steel Right9005-GX-A6TI-R-X A 3/16” x 3/4” Titanium Right9005-GX-A6-L-X A 3/16” x 3/4” Aluminum Left9005-GX-A6S-L-X A 3/16” x 3/4” Stainless Steel Left9005-GX-A6TI-L-X A 3/16” x 3/4” Titanium Left

The “X” in the part numbers listed above refer to the GX-Assist option you wish to be included with your kit. GX-Assist units are available in 75N, 125N and 175N. For example, to order a SafetyStride kit with aluminum uprights and a 125N GX-Assist for the right leg, your order number would be 9005-GX-A6-R-125.

SafetyStride Kit with Y Stance Control Stirrups and Modular Double Action Ankle Joints

Order No.Joint Size


SCSY-9005-A6-R A 3/16” x 3/4” Aluminum RightSCSY-9005-A6S-R A 3/16” x 3/4” Stainless Steel RightSCSY-9005-A6TI-R A 3/16” x 3/4” Titanium RightSCSY-9005-A6-L A 3/16” x 3/4” Aluminum LeftSCSY-9005-A6S-L A 3/16” x 3/4” Stainless Steel LeftSCSY-9005-A6TI-L A 3/16” x 3/4” Titanium Left

The SafetyStride is a mechanical stance control orthotic knee joint that utilizes a low-profile cabling system to automatically unlock itself at the end of stance phase. The key feature of the SafetyStride is its ability to resist knee flexion at any angle. The SafetyStride does not require full 180° knee extension to resist knee flexion in stance phase. US Patent No. 7,462,159 B1

FullStride Molding Dummy

Order No. Descritpion9006-MD-A SafetyStride Molding Dummy



B GX-Assist

A Y-Stirrup



13 To order 800-521-2192 • 248-588-7480 14To order 800-521-2192 • 248-588-7480

SafetyStride Kit with Stance Control Stirrup, Modular Double Action Ankle Joints and GX-Assist

Order No.Joint Size


SCSX-9005-GX-A6-R-X A 3/16” x 3/4” Aluminum RightSCSX-9005-GX-A6S-R-X A 3/16” x 3/4” Stainless Steel RightSCSX-9005-GX-A6TI-R-X A 3/16” x 3/4” Titanium RightSCSX-9005-GX-A6-L-X A 3/16” x 3/4” Aluminum LeftSCSX-9005-GX-A6S-L-X A 3/16” x 3/4” Stainless Steel LeftSCSX-9005-GX-A6TI-L-X A 3/16” x 3/4” Titanium Left

The “X’s” in the part numbers listed above refer to the stirrup size and the GX-Assist option you wish to be included with your kit. Stirrups are available in 9”, 10” and 11” lengths and GX-Assist units are available in 75N, 125N and 175N. For example, to order a SafetyStride kit with aluminum uprights, 9” stirrup, and a 125N GX-Assist for the right leg, your order number would be SCS9-9005-GX-A6-R-125.

SafetyStride Kit with Y Stance Control Stirrups, Modular Double Action Ankle Joints and GX-Assist

Order No.Joint Size


SCSY-9005-GX-A6-R-X A 3/16” x 3/4” Aluminum RightSCSY-9005-GX-A6S-R-X A 3/16” x 3/4” Stainless Steel RightSCSY-9005-GX-A6TI-R-X A 3/16” x 3/4” Titanium RightSCSY-9005-GX-A6-L-X A 3/16” x 3/4” Aluminum LeftSCSY-9005-GX-A6S-L-X A 3/16” x 3/4” Stainless Steel LeftSCSY-9005-GX-A6TI-L-X A 3/16” x 3/4” Titanium Left

The “X” in the part numbers listed above refer to the GX-Assist option you wish to be included with your kit. GX-Assist units are available in 75N, 125N and 175N. For example, to order a SafetyStride kit with Y stirrups, aluminum uprights and a 125N GX-Assist for the right leg, your order number would be SCSY-9005-GX-A6-R-125.

Order No. Description321 SafetyStride KAFO321-GX SafetyStride KAFO w/ GX-Assist321-PP PrePreg SafetyStride KAFO321-GX-PP PrePreg SafetyStride KAFO w/ GX-Assist

SafetyStride™ Custom KAFO’s

The “X” in the part numbers listed above refer to the stirrup size you wish to be included with your kit. Stirrups are available in 9”, 10” and 11” lengths. For example, to order a SafetyStride kit with aluminum uprights and a 9” stirrup for the right leg, your order number would be SCS9-9005-A6-R.

SafetyStride Kit with Stance Control Stirrup and Modular Double Action Ankle Joints

Order No.Joint Size


SCSX-9005-A6-R A 3/16” x 3/4” Aluminum RightSCSX-9005-A6S-R A 3/16” x 3/4” Stainless Steel RightSCSX-9005-A6TI-R A 3/16” x 3/4” Titanium RightSCSX-9005-A6-L A 3/16” x 3/4” Aluminum LeftSCSX-9005-A6S-L A 3/16” x 3/4” Stainless Steel LeftSCSX-9005-A6TI-L A 3/16” x 3/4” Titanium Left

A Y-Stirrup

B GX-Assist


A Stirrup


A Stirrup

B GX-Assist


15 To order 800-521-2192 • 248-588-7480 16To order 800-521-2192 • 248-588-7480

Stride4 Kit with Stance Control Stirrup and Modular Double Action Ankle Joints

Order No.Joint Size

Upright Dimensions Upright Material

SCSX-LMB-CO63-A6 A 3/16” x 3/4” AluminumSCSX-LMB-CO63-A6S A 3/16” x 3/4” Stainless SteelSCSX-LMB-CO63-A6TI A 3/16” x 3/4” Titanium

The “X” in the part numbers listed above refer to the stirrup size you wish to be included with your kit. Stirrups are available in 9”, 10” and 11” lengths. For example, to order a Stride4 kit with aluminum uprights and a 9” stirrup, your order number would be SCS9-LMB-CO63-A6.

Stride4 Kit with Y Stance Control Stirrups and Modular Double Action Ankle Joints

Order No.Joint Size


SCSY-LMB-CO63-A6 A 3/16” x 3/4” AluminumSCSY-LMB-CO63-A6S A 3/16” x 3/4” Stainless SteelSCSY-LMB-CO63-A6TI A 3/16” x 3/4” Titanium

Stride4™

Stride4 Kit with Heel Cable Receptor

Order No.Joint Size

Upright Dimensions Upright Material

LMB-CO63-A6 A 3/16” x 3/4” AluminumLMB-CO63-A6S A 3/16” x 3/4” Stainless SteelLMB-CO63-A6TI A 3/16” x 3/4” Titanium

Since the Stride4 knee joint does not have one fixed center of rotation, we strongly recommend using the Stride4 molding dummies (sold separately) for fabrication. The dummies have a 3/8” hole to mark knee center and are made of stainless steel. Stride4 dummies are left and right specific and may be ordered in pairs.

Order No. DescriptionLMB-CO63-FD-A Stride4 Molding Dummy

Like the FullStride and SafetyStride, the Stride4 utilizes a low-profile cabling system to automatically unlock at the end of stance phase. At the end of swing phase, when the orthotic knee joint reaches full extension, the locking mechanism re-engages to provide knee stability for stance phase.The joint body of the Stride4 is comprised of a four bar linkage mechanism. In the stance control mode of operation, the four bar linkage provides stability when the orthotic knee joint is fully extended. An integral extension assist spring housed within the midsection assists with knee extension, while an adjustable extension stop allows the practitioner to fine tune the point at which the joint enters its stable/locked state. If desired, the extension stop can be fully adjusted to eliminate the stability feature to facilitate free motion.A button on the Stride4 allows the patient to switch between locked and stance control modes of operation. When the lock option is selected and engaged by the patient, the joint will allow approximately 3° of flexion to provide some shock absorption to the user.

A Stirrup


A Y-Stirrup




Order No. Description323 Stride4 KAFO323-PP PrePreg Stride4 KAFO

Stride4™ Custom KAFO’s

Patent Pending

17 To order 800-521-2192 • 248-588-7480 18To order 800-521-2192 • 248-588-7480

Stride AccessoriesModular Double Action Ankle Joints

Order No.Joint Size Recess Material

SLM-2825-A A 3/4” Stainless SteelSLM-2825-B B 5/8” Stainless SteelASLM-2825-A A 3/4” AluminumASLM-2825-B B 5/8” Aluminum

Model GX-AssistFor individuals with significant weakness of hip musculature, the FullStride and SafetyStride may be ordered with a GX-Assist option that incorporates a pneumatic spring on the lateral or medial joint unit to assist in knee extension during the swing phase of gait. Available with your choice of a 75N, 125N (for standard applications), or 175N pneumatic spring, the GX-Assist can also be retrofit to existing FullStride and SafetyStride KAFO’s.

GX-Assist Add-On Kit

Order No. Description Side9006-GX-A-R-X GX-Assist Kit for FullStride A size (3/16” x 3/4”) Right Lateral9006-GX-A-L-X GX-Assist Kit for FullStride A size (3/16” x 3/4”) Left Lateral9006-GX-B-R-X GX-Assist Kit for FullStride B size (3/16” x 5/8”) Right Lateral9006-GX-B-L-X GX-Assist Kit for FullStride B size (3/16” x 5/8”) Left Lateral9005-GX-A-R-X* GX-Assist Kit for SafetyStride (3/16” x 3/4”) Right Medial9005-GX-A-L-X* GX-Assist Kit for SafetyStride (3/16” x 3/4”) Left Medial

The “X” in the part numbers listed above refer to the GX-Assist option you wish to be included with your add-on kit. GX-Assist units are available in 75N, 125N and 175N. For example, to order a GX-Assist Kit for an A size FullStride with a 75N GX-Assist Unit for the right leg, your order number would be 9006-GX-A-R-75.

Stance Control Y Stirrup Only

Order No.Joint Size Material

SC-SL2810-A-Y A Stainless Steel

Stance Control Stirrup Only

Order No. Length MaterialSC-SL2800-X9 9” Stainless SteelSC-SL2800-X10 10” Stainless SteelSC-SL2800-X11 11” Stainless Steel

Knee and Ankle Joint Lamination Uprights

Order No.Bar

Width DescriptionLK-A#7 3/4” Proximal UprightLK-A#8-L 3/4” Distal Upright - LeftLK-A#8-R 3/4” Distal Upright - RightLK-B#7 5/8” Proximal UprightLK-B#8-L 5/8” Distal Upright - LeftLK-B#8-R 5/8” Distal Upright - RightLA-A 3/4” Ankle Joint UprightLA-B 5/8” Ankle Joint Upright

Lamination UprightsTo assist you with laminating, we have also developed lamination uprights for use with our Stride stance control knee joints and modular double action ankle joints.

Stance Control StirrupsTo further increase your design options for our Stride stance control systems, we have developed two Slim Line double action stirrups that can be connected directly to the Stride cabling system.

Modular Double Action Ankle JointsOur modular Slim Line double action ankle joints are optimized with pins in the anterior channels and springs in the posterior channels to provide you with an appropriate ankle joint setup for use with our Stride systems.

Pressurization

Force (N)

Torque

(in-lbf)

Band

Color75N 17 Blue

125N 28 Green175N 39 No Band

Conversions

*When using the GX-Assist kit with the SafetyStride Stance Control System, the GX-Assist Unit must be attached to the medial side of the orthosis.

Decals (Sold in Sets of 4)

Order No.Joint Size Description

9006-A-Decals A FullStride “A” Size Decals9006-B-Decals B FullStride “B” Size Decals9005-A-R-Decals A SafetyStride Decals - Right9005-A-L-Decals A SafetyStride Decals - LeftLMB-CO63-A-Decals A Stride4 Decals

FullStride Decals SafetyStride Decals Stride4 Decals

Replacement DecalsTo enhance the overall look of your orthosis, we have created a set of knee joint decals for you to apply. We recommend you apply the decals after the fitting and gait training process is complete.

©2015 Becker Orthopedic Appliance Co., All rights reserved.Rev. 11/14

P: 800-521-2192 • 248-588-7480 F: 800-923-2537 • 248-588-2960

Central FabricationF: 248-588-4555

BeckerOrthopedic.com

stride family kits ordering information - microsoft family... · stride family kits ordering...

Documents