stripping platform system - mesaimalat.com.tr · 16e-platform with functional access on corners ....

06/2010 Technical Manual

MESA – 16E

Stripping Platform System

Contents

Introduction

System Description 1

Working Limits 2

Scope of Applications 3

System Overview 4

Std.Dimensions and Positioning 12

Timbers 15

Part List

Stripping Platform Sets 19 Assemblies 22

Unique Parts 25

Weights of Sets 27

General Remarks

Stripping Platform –16E

TECHNICAL MANUAL – 06-2010 www.mesaimalat.com.tr

Important Note

Sight-Check

Information

Warning

Remarks

Symbols Used

� All products of MESA should be used

according to the relevant safety regulations of

the state or country in which they are operated.

� Schematic illustrations on this manual give

only basic rules to be applied during assembly,

therefore it does not complete from the safety point

of view.

� MESA products could only be used

according to the Instruction or User Manuals,

any Technical Details given in Documents

provided by MESA.

� Any MESA products could not be combined

with the products of other manufacturers.

� Mesa Imalat reserves the right to make

technical changes in the interests of progress.

© Copyright by MESA Imalat San.ve Tic A.S.-

Ankara-Turkey

Warranty



Warranty Period

� Limited Warranty for two (2) years is

promissed by Mesa İmalat San.ve Tic. A.Ş. for

Steel Face Formworks and Slab Formworks

unless the Operational Conditions described

below are violated.

� This warranty covers defects of steel

material, welding and painting.

� For Hydraulic Cylinders and Hydraulic

Power Units , the limited warranty period is one

(1) year.

Service Life

� Steel Face Formworks and Slab

Formworks, produced by Mesa İMALAT San.ve

Tic.A.Ş., is good for 500 concrete castings

unless The Operational Conditions described

below are violated.

Operational Conditions

� Instruction or User’s Manuals must be

used while Formwork assemblies, accessory

attachements and concrete casting.

� It is not allowed to use hummer,

sedgehummer, cranka and vs that cause physical

demage on Formworks, and also applications of

extra welding, cutting and drilling without permission

of authorities.

� It is not allowed to exceed the Max

Concrete Pressure described in Technical or

User’s Manuals.

� Formwork should be used between + 40 °C

and – 30 °C.

� Formworks should be cleaned after each

application to remove the concrete residues and

active faces should be lubricated with suitable

concrete/metal seperation oil.

� After 250 applications, maintenance should

be done at site.

� This maintenance covers the flatning of

active surface, repainting, welding and rust

control.

� After 500 applications, maintenance should

be done at work shop where the necessary

equipments exist.

� During the storage period, all active

surfaces should be lubricated with suitable oil to

prevent rusting.

� Stock area should be closed area; if it is not

possible, formworks and accessories should be

stocked in open areas by covering them with water

resistant materials.

� Maitenance procedure should be

repeated for each 250 usages after first 500

usages are exceeded.

� For HCP-hydraulic system, the allowable

working pressure must not be exceeded ( 250 bar ).

� All connections between hydraulic

cylinders, hydraulic power units and hydraulic

pipes and must be checked against leakage

before each usage.

� Electrical power supply and connections

must be suitable as written in the ınstruction or

User’s Manuals given by MESA.

Introduction System Description


1

TECHNICAL MANUAL - 06-2010 www.mesaimalat.com.tr

SYSTEM DESCRIPTION

Basic Introduction

MESA-16E Stripping Platform System is designed and

manufactured for protections on the open facades

through which the forms are stripped or on which the

forms are supported.

Basically, steel construction of the system consists two

or three triangular frames according to the opening

and their connections.

Although Stripping platforms are located next to each

other along the facade of the building, they could be

used individually according to the building facade.

Platform where the formworks are stripped and the

working is realised, is composed by wooden or steel

girders and wooden coverages on it.

It provides high degree of protections with foldable

safety nets in front and post guardrails on each sides if

needed.

Each individual platforms are transferred by crane.

Standart Spans

MESA-16E Stripping Platforms are easily adjusted to

different spans which are arranged according to

standart interior openings of Half Tunnel applications.

These openings change between 2,100 – 5,100 mm

with 300 mm incrementations.

Between 5,400 and 6,000 mm, MESA-16E Stripping

Platforms includes three triangular frames.

Standart Lengths

Length of MESA-16E Stripping Platforms differs with

three Standart Triangular Frames called as 6M, 7M and

8M having 6000, 7000 and 8000 mm total lengths

respectively.

These three lengths of frames give working areas with

useable dimensions from 3,000 mm to 5,000 mm.

Scope of Applications

Although MESA-16E Stripping Platforms are generally

suitable .for Half-Tunnel applications for removing the

tunnel forms during stripping process, they also serve

in all type of conventional construction sites where

safety, limited stacking or large working areas are

required.

Since the components of MESA-16E Stripping

Platforms are both demountable and man-handled, the

system is easily transported and transferred.

Introduction Working Limits


2

TECHNICAL MANUAL - 06-2010 www.mesaimalat.com.tr

WORKING LIMITS

Dimensional Limits

Maximum span with two triangular frames is

4,500 mm exluding cantilever parts of the platform.

Maximum span with three triangular frames is

5,400 mm exluding cantilever parts of the platform.

Maximum cantilever span on each sides are

1,200 mm except otherwise stated.

Maximum length of the triangular frame is 8000

mm. Whereas the Length of Standart Triangular Frame

is 6000 mm.

Length of the available platform area with

Standart Triangular Frame is 3,000 mm.

Maximum length of the available platform area

is 5,000 mm. with 8000 mm Triangular Frame.

Loading Limits

When 6M-Triangular Frame is in use,

Maximum half tunnel weight is between

8,860-6,000 kg,

Maximum distributed load is between 2,000-325 kg/m2,

and

Maximum point load is between 2,120-800 kg;

According to the span length differing from 1,800 mm to

4500 mm.



5,010- 3,000 kg,

Maximum distributed load is between 900-300 kg/m2,

and

Maximum point load is between 1,160-800 kg;


4500 mm.



7,200-3,600 kg,

Maximum distributed load is between 835-260 kg/m2,

and

Maximum point load is between 24,00-1,000 kg;


4500 mm.

Introduction Scope of Applications


3


SCOPE of APPLICATIONS

16E-Platform for stripping of Tunnel Formworks

16E-Platform for transferring of Loads

Safety Net at work on the 16E-Stripping Platform

16E-Platform for stripping of Table Forms

16E-Platform on Convensional Applications

16E-Platform with functional access on corners

Introduction System Overview


4


SYSTEM OVERVIEW

Double-Frame Platform

1 D A 2 C 3 4 5 6 7 E 8 9 B

Assemblies Parts

A - Triangular Frame 1 - Top Wedge

B - Safety Set 2 - Fixing Tube

C - Lifting Device 3 - Back Diagonal

D - Safety Connector 4 - Front Diagonal

E - Raising Unit (*Optional) 5 - Swivel Coupler

6 - Frame Connector

7 - Bottom Wedge

8 - Timber Girder

9 - Timber Cover



5


Triple-Frame Platform

1 D A 2 C 3 8 9 5 6 7 E 4 B

Assemblies Parts

A - Triangular Frame 1 - Top Wedge

B - Safety Set 2 - Fixing Tube

C - Lifting Device 3 - Back Diagonal

D - Safety Connector 4 - Front Diagonal

E - Raising Unit (*Optional) 5 - Swivel Coupler

6 - Frame Connector

7 - Bottom Wedge

8 - Timber Girder

9 - Timber Cover



6


A – Triangular Frames

6M-Triangular Frame

10 11 12 13 14 15 16

Parts

10 - Pin (25x200)

11 - Back Profile

12 - Frame Girder (6000 mm)

13 - U Bolt-M14 Nut

14 - Vertical Profile

15 - Cotter

16 - Front Profile



7


7M-Triangular Frame

10 11 12 13 14 15 16

Assemblies Parts

E - Raising Unit Set (*Optional) 10 - Pin (25x200)

11 - Back Profile


13 - U Bolt-M14 Nut


15 - Cotter

16 - Front Profile



8


8M-Triangular Frame

10 11 12 13 14 15 17 18 16

Parts

10 - Pin (25x200)

11 - Back Profile


13 - U Bolt-M14 Nut


15 - Cotter

16 - Front Profile

17 - Inner Diagonal 18 - Inner Vertical



9


B - Safety Sets

on Double-Frame Platform

19 20 21 22 15 23 24 25 26

Parts

15 - Cotter

19 - Side Guardrail Tube

20 - M12 Bolt-Nut-Washer

21 - Safety Net

on Triple-Frame Platform 22 - Guardrail Tube

23 - Pin (16x115)

24 - M14 Bolt-Nut-Washer

25 - Safety Rope

26 - Guardrail Tube (w/pin)



10


C – Lifting Device D – Safety Connector

27 35

28 31

29 32

30 33

34

Parts Parts

27 - Lifting Ring 31 - Safety Chain

28 - Lifting U 32 - Flange Nut

29 - M18 Nut and Washer 33 - Wing Nut

30 - Lifting Bracket 34 - Tie-Rod

35 - M8 Bolt and Nut

E – Raising Unit Set (*Optional) F – Side Guardrail Parts (*Optional)

10 - Pin (25x200)

15 - Cotter

38 – Guardrail Post

36 - Raising Unit 37 - Guardrail Connector

(Plinth Bracket included)



11


Tubes

2 - Fixing Tube

3 - Back Diagonal

4 - Front Diagonal

6 - Frame Connector

Introduction Std.Dimensions&Positioning


12


200mm ≤ X ≤ 350mm S : Wall Opening

L : Span of Frame

A : Girder overlaps on wall ends

B : Length of Timber Girder

X : Gap between Frame and Wall

Refer to MESA advisory for other span

lengths listed above.

STD.DIMENSIONS and POSITIONING

Standart Spans

Double-Frame Platform Triple-Frame Platform

SpanL (mm) S (min.) S (max.)

1500 1900 21991800 2200 2499

2100 2500 2799

2400 2800 3099

2700 3100 3399

3000 3400 3699

3300 3700 3999

3600 4000 42993900 4300 4599

4200 4600 48994500 4900 5199

Wall Openings SpanL (mm) S (min.) S (max.)

2400 5200 54992550 5500 57992700 5800 6099

Wall Openings



13


Area = 5m x B

Area = 4m x B

Area = 3m x B

Standart Areas

6M-Triangular Frame

7M-Triangular Frame

8M-Triangular Frame



14


2650mm ≤ H ≤ 2700mm

2650mm ≤ H ≤ 3500mm

Refer to MESA advisory for higher

applications.

Standart Heights

without Raising Unit

with Raising Unit

HHHH

HHHH

Introduction Timbers


15


d (mm) t (mm) w (mm) l (mm)

≤ 150 mm 100 70 200

≤ 170 mm 80 70 200

≤ 200 mm 120 70 200

d : Slab Thickness

TIMBERS

Top Wedge

Bottom Wedge

t1t1t1t1

w2w2w2w2

llll

tttt

wwww

llll

t2t2t2t2

w1w1w1w1

upper wedge t1 (mm) w1 (mm) l (mm)

100 100 300

lower wedge t2 (mm) w2 (mm) l (mm)

50 200 300

Introduction


TECHNICAL MANUAL – 06-2010

A (mm)

50 150 mm ≤ p ≤ 250 mm

100 250 mm < p ≤ 400 mm

w

Timber Girders

without Cantilever Platform

BBBB

wwww

tttt

16

www.mesaimalat.com.tr

B = S + 2A

w (mm)

65Do not use damaged or knotty woods.

Length Quantity

t (mm)

200 d ≤ 180 mm

250 180 mm < d

Timbers

p : Wall Thickness

d : Slab Thickness

S : Wall Opening

L : Span of Frame

A : Girder overlaps on

wall ends

B : Length of

Timber Girder

X : Gap between

Frame and Wall

Do not use damaged or knotty woods.

Quantity

6M 67M 8

8M 10

Number of

Girders

Triangular

Frame

Introduction Timbers


17


Cantilever in single side B = S + K + A

Cantilever length should not be greater

than 1200 mm.

K ≤ 1200 mm

Cantilever in both side B = S + K1 + K2 + A

with Cantilever Platform

Quantity

Length

6M 67M 8

8M 10

Number of

Girders

Triangular

Frame

Introduction


TECHNICAL MANUAL – 06-2010

t (mm)

Timber Covers

CCCC

wwww

tttt

18

www.mesaimalat.com.tr

(mm)

50

w (mm)

main

filler

Quantity = B

Begin with using “ w = 200 mm ”

p : Wall Thickness

d : Slab Thickness

S : Wall Opening

L : Span of Frame

A : Girder overlaps on

wall ends

B : Length of

Timber Girder

X : Gap between

Frame and Wall

Triangular Frame

Timbers

(mm)

main 200

filler 100

Quantity = B(mm) / w(mm)

Begin with using “ w = 200 mm ”

6M 3,000

7M 4,0008M 5,000

Triangular FrameLength C

(mm)

Part List Stripping Platform Sets


19


Select Tubes from Tables in Section

“Uniques Parts” according to the variable


No Description PART NO PART NAME 1500 1800 2100 2400 2700 3000

A 6M-Triangular Frame E.M.L16E.0K2560 16E-TRIANGULAR FRAME (6M) 2

B Safety Set 1

C Lifting Device M.J.T16E.0EK 16E-PLATFORM LIFTER-E 2

D Safety Connector E.M.JS12.0E 12F-SAFETY CONNECTOR SET 2

E Raising Unit Set(*Optional) E.M.JT16.0K1250 16E-RAISING UNIT (1250) 2

5 Swivel Coupler Z.B.BBK1.0E SWIVEL COUPLER (48x48)-E 10

2 Fixing Tube M.J.B16E.1GG…. 16E-FIXING TUBE (See Table)-G 1 1700 2000 2300 2600 2900 3200

3 Back Diagonal M.J.B16E.0G…. 16E-PLATFORM TUBE (See Table)-G 2 2900 3200 3200 3500 3800 4100

4 Front Diagonal M.J.B16E.0G…. 16E-PLATFORM TUBE (See Table)-G 2 2900 3200 3200 3500 3800 4100

6 Frame Connector M.J.B16E.0G…. 16E-PLATFORM TUBE (See Table)-G 1 1700 2000 2300 2600 2900 3200

No Description PART NO PART NAME 3300 3600 3900 4200 4500


B Safety Set 1





2 Fixing Tube M.J.B16E.1GG…. 16E-FIXING TUBE (See Table)-G 1 3500 3800 4100 4400 4700

3 Back Diagonal M.J.B16E.0G…. 16E-PLATFORM TUBE (See Table)-G 2 4200 4400 4700 5000 5000

4 Front Diagonal M.J.B16E.0G…. 16E-PLATFORM TUBE (See Table)-G 2 4200 4400 4700 5000 5000

6 Frame Connector M.J.B16E.0G…. 16E-PLATFORM TUBE (See Table)-G 1 3500 3800 4100 4400 4700

No Description PART NO PART NAME 4800 5100 5400


B Safety Set 1





2 Fixing Tube M.J.B16E.1GG…. 16E-FIXING TUBE (See Table)-G 1 5000 5300 5600

3 Back Diagonal M.J.B16E.0G…. 16E-PLATFORM TUBE (See Table)-G 4 3500 3800 3800

4 Front Diagonal M.J.B16E.0G…. 16E-PLATFORM TUBE (See Table)-G 4 3500 3800 3800

6 Frame Connector M.J.B16E.0G…. 16E-PLATFORM TUBE (See Table)-G 1 5000 5300 5600

SPAN LENGTH L (mm)

LEGEND ID

LEGEND ID

6M - DOUBLE FRAME PLATFORM ( 3300 ≤ L ≤ 4500 ) Tube Lengths (mm)

MESA ID Quantity

per Set

SPAN LENGTH L (mm)

6M - TRIPLE FRAME PLATFORM ( 4800 ≤ L ≤ 5400 ) Tube Lengths (mm)

MESA ID Quantity

per Set

LEGEND ID

6M - DOUBLE FRAME PLATFORM ( 1500 ≤ L ≤ 3000 ) Tube Lengths (mm)

MESA ID Quantity

per Set

SPAN LENGTH L (mm)

STRIPPING PLATFORM SETS

6M-Stripping Platform Sets



20







B Safety Set 1











B Safety Set 1











B Safety Set 1









MESA ID

7M - TRIPLE FRAME PLATFORM ( 4800 ≤ L ≤ 5400 )

LEGEND ID Quantity

per Set

SPAN LENGTH L (mm)

7M - DOUBLE FRAME PLATFORM ( 1500 ≤ L ≤ 3000 )

LEGEND ID MESA ID


LEGEND ID Quantity

per Set

Quantity

per Set

MESA ID

Tube Lengths (mm)

Tube Lengths (mm)

Tube Lengths (mm)

SPAN LENGTH L (mm)

SPAN LENGTH L (mm)




21







B Safety Set 1













B Safety Set 1













B Safety Set 1











LEGEND ID Quantity

per Set

SPAN LENGTH L (mm)

MESA ID

MESA ID

MESA ID

SPAN LENGTH L (mm)

8M - TRIPLE FRAME PLATFORM ( 4800 ≤ L ≤ 5400 )

LEGEND ID Quantity

per Set


SPAN LENGTH L (mm)

Tube Lengths (mm)

Tube Lengths (mm)

Tube Lengths (mm)


LEGEND ID Quantity

per Set


Part List Assemblies


22


A 6M - TRIANGULAR FRAME E.M.L16E.0K2560

No Description PART NO PART NAME

10 Pin (25x200) Z.C.P16E.0E02 16E-PIN (Ø25x200)-E 0.76 5

11 Back Profile M.L.16EA.0K33122 16E-BACK SUPPORT (3122mm) 20.81 1

12 Frame Girder L: 6000 mm M.L.16EA.2K16000 16E-MAIN GIRDER IPE-A 160-6000mm 91.30 1

14 Vertical Profile M.L.16EA.1K22250 16E-VERTICAL SUPPORT (2250mm) 34.87 1

15 Cotter T.P.FM05.S COTTER-G (5mm) 0.03 5

16 Front Profile M.L.16EA.0K43517 16E-FRONT SUPPORT (3517mm) 23.24 1

TOTAL WEIGHT (kg) 174.17





12 Frame Girder L: 7000 mm M.L.16EB.2K17000 16E-MAIN GIRDER IPE-A 160-7000mm 105.37 1









12 Frame Girder L: 8000 mm M.L.16ED.3K18000 16E-MAIN GIRDER IPE-A 160-8000mm 124.66 1




17 Inner Diagonal M.L.16EA.1K71990 16E-MID SUPPORT (1990mm) 12.50 1

18 Inner Vertical M.L.16EA.2K71196 16E-MID SUPPORT (1196mm) 8.27 1


LEGEND ID MESA ID Unit Weight

(kg)

Quantity

per Set


(kg)

Quantity

per Set


(kg)

Quantity

per Set

ASSEMBLIES



23


Select Safety Nets and Guardrail Tubes

from Tables in Section “Uniques Parts”

according to the variable lengths listed

above.

B


21 Safety Net Z.M.A150.00… SAFETY NET 1500 x See Table 1 2100 2400 2700 3000 3300 3600

22 Guardrail Tube M.J.B16E.0G… 16E-PLATFORM TUBE (See Table)-G 2 2000 2300 2600 2900 3200 3500

19 Side Guardrail Tube M.J.S12F.0EY 12F-SIDE GUARDRAIL TUBE-E 3.53 2

26 Guardrail Tube (w/pin) M.J.S12F.1GP 12F-GUARDRAIL TUBE (w/pin)-G 10.45 2

23 Pin (16x115) Z.C.P16E.0E01 16E-PIN(Ø16x115)-E 0.19 2

25 Safety Rope Z.M.A006.0300 SAFETY ROPE (6mmx3000) 0.01 2

24 M14 Bolt T.C.GM14.1S0080 HEXAGON BOLT-G (8.8) M14x80 0.12 4

24 M14 Nut T.D.GM14.1S HEXAGON NUT-G (8.8) M14 0.02 4

24 M14 Washer T.P.PM14.S WASHER-G (M14) 0.01 4





B


21 Safety Net Z.M.A150.00… SAFETY NET 1500 x See Table 1 3900 4200 4500 4800 5100

22 Guardrail Tube M.J.B16E.0G… 16E-PLATFORM TUBE (See Table)-G 2 3800 4100 4400 4700 5000












B


21 Safety Net Z.M.A150.00… SAFETY NET 1500 x See Table 1 5400 5700 6000

22 Guardrail Tube M.J.B16E.0G… 16E-PLATFORM TUBE (See Table)-G 2 5300 5600 5900












Quantity

per Set

SAFETY SET (on double-frame platform) ( 3300 ≤ L ≤ 4500 )


(kg)

Quantity

per Set

SAFETY SET (on double-frame platform) ( 1500 ≤ L ≤ 3000 )


(kg)

Quantity

per Set

SPAN LENGTH L (mm)

Variable Lengths (mm)



SPAN LENGTH L (mm)

SPAN LENGTH L (mm)

SAFETY SET (on triple-frame platform) ( 4800 ≤ L ≤ 5400 )


(kg)



24


C LIFTING DEVICE M.J.T16E.0EK


27 Lifting Ring Z.L.HST1.0E LIFTING RING-Forged (18x75-135)-E 0.82 1

28 Lifting U Z.C.CU07.0E U BOLT-108x460 (M18x330)-E 1.93 1

30 Lifting Bracket Z.L.K16E.0E 16E-LIFTING NPU-E 0.04 2




D SAFETY CONNECTOR E.M.JS12.0E


31 Safety Chain M.J.S12F.0GZ 12F-SAFETY CHAIN-G 4.16 1

32 Flange Nut Z.S.STV1.0E20F FLANGE NUT (20Fx55)-E 0.66 1

33 Wing Nut Z.S.SKY1.0E23Y10 WING NUT (20F)-E 0.91 1

34 Tie-Rod Z.S.TD23.0E040 TIE ROD Ø23x400 (M23/Y10)-E 1.29 1





E RAISING UNIT SET E.M.JT16.0K1250


36 Raising Unit M.J.T16E.1KY125 16E-RAISING UNIT (1250) 20.44 1




F SIDE GUARDRAIL PARTS


37 Guardrail Connector Z.B.H16E.0K1 16E-GUARDRAIL CONNECTOR (1) 3.19

38 Guardrail Post M.D.H401.0K150 401-GUARDRAIL POST (1500) 6.39


(kg)

Quantity

per Set


(kg)

Quantity

per Set

Quantity

per Set


(kg)

Quantity

per Set


(kg)

Part List Unique Parts


25


UNIQUE PARTS

Tubes

MESA ID MESA ID

PART NO PART NAME PART NO PART NAME

1500 M.J.B16E.0G17 16E-PLATFORM TUBE (1700)-G 5.98 1500 M.J.B16E.1GG170 16E-FIXING TUBE (1700)-G 10.45














MESA ID MESA ID


1500 M.J.B16E.0G29 16E-PLATFORM TUBE (2900)-G 10.20 1500 M.J.B16E.0G20 16E-PLATFORM TUBE (2000)-G 7.04














MESA ID MESA ID


1500 M.J.B16E.0G29 16E-PLATFORM TUBE (2900)-G 10.20 1500 M.J.B16E.0G6039 16E-PLATFORM TUBE (Ø60x3900)-G 16.38














23 - Guardrail Tube

SPAN

LENGTH - L

(mm)

Unit Weight

(kg)

2 - Fixing Tube6 - Frame Connector

SPAN

LENGTH - L

(mm)

SPAN

LENGTH - L

(mm)

SPAN

LENGTH - L

(mm)

SPAN

LENGTH - L

(mm)

3 - Back Diagonal

4 - Front Diagonal (6M & 7M Triangular Frame)

Unit Weight

(kg)

Unit Weight

(kg)

Unit Weight

(kg)

Unit Weight

(kg)

4 - Front Diagonal (8M Triangular Frame)

SPAN

LENGTH - L

(mm)

Unit Weight

(kg)

Part List Unique Parts


26


For ordering, use MESA ID “PART NO”s

and MESA ID “PART NAME”s of Sets,

Assemblies and any other unique parts.

Suffix “-E “ on the Part Name means that

Part is Electro Galvanised.

Suffix “-G “ on the Part Name means that

Part is Hot Deep Galvanised.

Safety Nets

Swivel Couplers

Tool Box

MESA ID

PART NO PART NAME

T.M.AG22.24 2-ENDED OPEN JAW SPANNER 22-24 0.18

T.M.AG27.30 2-ENDED OPEN JAW SPANNER 27-30 0.48

Unit Weight

(kg)

MESA ID

PART NO PART NAME

1500 Z.M.A150.0021 SAFETY NET 1500x2100 0.47

1800 Z.M.A150.0024 SAFETY NET 1500x2400 0.67

2100 Z.M.A150.0027 SAFETY NET 1500x2700 0.87

2400 Z.M.A150.0030 SAFETY NET 1500x3000 1.08

2700 Z.M.A150.0033 SAFETY NET 1500x3300 1.28

3000 Z.M.A150.0036 SAFETY NET 1500x3600 0.01

3300 Z.M.A150.0039 SAFETY NET 1500x3900 0.87

3600 Z.M.A150.0042 SAFETY NET 1500x4200 0.94

3900 Z.M.A150.0045 SAFETY NET 1500x4500 1.01

4200 Z.M.A150.0048 SAFETY NET 1500x4800 1.08

4500 Z.M.A150.0051 SAFETY NET 1500x5100 1.14

4800 Z.M.A150.0054 SAFETY NET 1500x5400 1.21

5100 Z.M.A150.0057 SAFETY NET 1500x5700 1.28

5400 Z.M.A150.0060 SAFETY NET 1500x6000 1.35

22 - Safety Net

SPAN

LENGTH - L

(mm)

Unit Weight

(kg)

MESA ID

PART NO PART NAME

Z.B.BBK1.0E SWIVEL COUPLER (48x48)-E 1.11



Unit Weight

(kg)

6 - Swivel Coupler

Part List Weight of Sets


27


WEIGHTS of SETS

MESA ID

SET NO SET NAME without timber with timber

1500 S.S.K16E.0K1560 16E-STRIPPING PLATFORM SET - 150x600 486.79 1,095.37







































4800 S.S.K16E.0K4880 16E-STRIPPING PLATFORM SET - 480x800 1,034.29 2,516.05



8M

- T

RIA

NG

UL

AR

FR

AM

E

Set Weight (kg)

16E - Stripping Platform Sets

6M

- T

RIA

NG

UL

AR

FR

AM

E

SPAN

LENGTH - L

(mm)

7M

- T

RIA

NG

UL

AR

FR

AM

E

Notes

