stuart pl 2017 englisch - deutsche messe...
TRANSCRIPT
Products 2017
All Stuart equipment is supplied with the anti-microbial protection BioCote® inhibiting the ability of bacteria to reproduce.
Dunn Labortechnik GmbH · Thelenberg 6 · 53567 Asbach · Germany Tel. +49 (0) 26 83 / 4 30 94 · Fax +49 (0) 26 83 / 4 27 76 · e-mail: [email protected] · Internet: www.dunnlab.de
2
Contents
Product Page
Accessories for Hotplates and Magnetic Stirrers 7 - 8
Aluminium Blocks for Block Heaters 3
Block Heaters 3
Centrifuge (Mini Centrifuge) 13
Ceramic Bead Bath for Block Heaters “Flexi Block“ 4
Colony Counters 19
Evaporator for Block Heaters 4
Flask Shakers 16
“Flexi Block“ – Ceramic Bead Bath for Block Heaters 4
Flocculators and Accessories 18
Heating Blocks for Round Bottom Flasks 8
Heating Mantles 10
Hotplates 5
Homogenisers and Accessories 19
Hybridisation Incubator and Bottles 12
Incubators (for multi-well plates, with shakers, rockers, rotisserie, for hybridisation, for total visibility, with cooling etc.)
10 - 12
Infrared Hotplate 5
Magnetic Stirrers with or without Hotplate 6 - 7
Melting Point Apparatus with Accessories 18
Mini Centrifuge 13
Mixers 4, 14, 17
Overhead Stirrers with Accessories 14
PTFE Hotplate 5
Recirculating Coolers 20
Rockers (3D gyratory or see-saw wave motion) 14
Roller Mixers 17
Rotary Evaporators and Accessories 20
Rotators 16 - 17
Retort Rods and Temperature Probes for Hotplates and Magnetic Stirrers with Hotplate
7
Sample Concentrator 4
Shakers 15
Stirrers with or without Hotplate 6 - 7
Temperature Controller for Hotplates and Magnetic Stirrers with Hotplate 8
Vortex Mixers 4
Water Baths (also with shaking feature) 9
Water Stills 13
3
Block Heaters Temperature: up to 130 °C or 200 °C
Heater with digital or analogue control available
2 heaters available with independent dual temperaturecontrol for 2 blocks (SBH130DC, SBH200DC)
Aluminum blocks are not included and have to beordered separately
SBH130 SBH130DC
Cat. No. Description
SBH130 Block heater for 2 blocks (have to be ordered separately), analogue control, “hot“ warning light, temperature range: ambient + 8 °C to 130 °C °C, ± 0.1 °C
SBH130D Block heater for 2 blocks (have to be ordered separately), digital control and display, temperature range: ambient + 8 °C to 130 °C °C, ± 0.1 °C
SBH200D Block heater for 2 blocks (have to be ordered separately), digital control and display, temperature range: ambient + 8 °C to 200 °C, ± 0.1 °C
SBH130D/3 Block heater for 3 blocks (have to be ordered separately), digital control and display, temperature range: ambient + 8 °C to 130 °C, ± 0.1 °C,
SBH200D/3 Block heater for 3 blocks (have to be ordered separately), digital control and display, temperature range: ambient + 8 °C to 200 °C, ± 0.1 °C
SBH130DC Block heater, with independent dual temperature control for 2 blocks (have to be ordered separately), digital control and display, temperature range: ambient + 8 °C to 130 °C, ± 0.1 °C
SBH200DC Block heater, with independent dual temperature control for 2 blocks (have to be ordered separately), digital control and display, temperature range: 50 °C to 200 °C, ± 0.1 °C
SBH/2 Safety cover for 2 block models
SBH/3 Safety cover for 3 block and dual control models
SBH/4 Block extraction tool
Aluminium Blocks for use with Stuart Block Heaters Blocks can be used in different combinations. They all have a separate hole to accommodate a thermometer if desired. Dimensions of all blocks (w x d x h) 75 x 95 x 50 mm except SHT/96 and SHT1/384 with 150 x 95 x 61 mm. Please note all Block Heaters will only operate effectively if the full compliment of blocks is present.
Cat. No. Description
SHT1/0 Plain blockSHT1/10 For 20 tubes with a diameter of 10 mm, hole size (Ø x D): 10.5 x 47 mm SHT1/12 For 20 tubes with a diameter of 12 mm, hole size (Ø x D): 12.6 x 47 mm SHT1/12/33 For 20 tubes with a diameter of 12 mm, hole size (Ø x D): 12.6 x 33 mm SHT1/13 For 20 tubes with a diameter of 13 mm, hole size (Ø x D): 13.5 x 47 mm SHT1/16 For 12 tubes with a diameter of 16 mm, hole size (Ø x D): 16.5 x 47 mm SHT1/17/1 For 12 tubes with a diameter of 17 mm, hole depth: 47 mm SHT1/19 For 8 tubes with a diameter of 19 mm, hole size (Ø x D): 19.5 x 47 mm SHT1/20 For 20 x 2 ml tubes, hole size (Ø x D): 10.5 x 33 mm SHT1/21 Block with removable channels for glass and disposable cuvettes SHT1/22 For 20 x 1,5 ml tubes, hole size (Ø x D): 10.7 x 35 mm, 9 ° taper SHT1/25 For 6 tubes with a diameter of 25 mm, hole size (Ø x D): 25.5 x 47 mm SHT1/28 For 6 tubes with a diameter of 28 mm, hole size (Ø x D): 28.0 x 47 mm SHT1/30 For 30 x 0.5 ml tubes, hole size (Ø): 7.8 mm, 9 ° taper SHT1/30/1 For 4 tubes with a diameter of 30 mm, hole size (Ø x D): 30.1 x 47 mm SHT1/33 For 4 tubes with a diameter of 33 mm, hole size (Ø x D): 33.2 x 47 mm SHT1/48 For 48 x 0.2 ml tubes, hole size (Ø): 6.1 mm, 9 ° taper SHT1/80 For 10 x 8 tube strips (0.2 ml tubes) SHT1/96 For one 96 well plate SHT1/384 For one 384 well plate
4
“Flexi Block“ – Ceramic Bead Bath for Block Heaters
Filled with special ceramic beads, the “Flexi Block“ inserts for the Stuart block heaters (see page 3) allow to heat and warm samples in different kind of vessels: any diameter test tubes, microtubes, vials, cuvettes as well as microplates. The “Flexi Block” can be used instead of water baths in order to exclude the risk of contamination by splash water or condensed water. They can be used with all Stuart block heaters (see page 3). The ceramic beads are autoclavable and offer an excellent thermal transmission up to 100 °C and can also be cooled or frozen and used then as ice bath replacement.
SBH130 with SHT/FLEXI2
Cat. No. Description
SHT/FLEXI2 Flexi Block insert, beads included,for Stuart block heaters SBH130, SBH130D, SBH200D, SBH130DC, and SBH200DC
SHT/FLEXI3 Flexi Block insert, beads included, triple widthfor Stuart block heaters SBH130D/3 and SBH200D/3
FTCOOLBE Replacement beads, autoclavable, to be used up to 100 °C
Sample Concentrator / Evaporator for Block Heaters Fast and convenient way of concentrating multiple samples in a block heater at once Simple gas delivery system to pass gas over the sample surface via stainless steel
needles. In combination with the heat from the block heater below, this results in afast, efficient evaporation.
Adjustable stand for accurate height control Different gas delivery needles available Compatible only with Stuart block heaters SBH130D/3 and SBH200D/3
SBH CONC/1 with SBH200D/3
Cat. No. Description
SBH CONC/1
Sample concentrator (without needles and block heater, have to be ordered separately)
SBH130D/3 Block heater, see page 3
SBH200D/3 Block heater, see page 3
Gas delivery needles for SBH CONC/1 F7209 Needles, 76 mm (pack of 100) F7210 Needles, 127 mm (pack of 100) FSC4NCS Needles, PTFE coated, 76 mm (pack of 100) FSC4NCL Needles, PTFE coated, 127 mm (pack of 100)
Vortex Mixers
NEW! SA6 SA7 SA8 + SA8/1
Cat. No. Description
SA6 NEW! Vortex mixer, adjustable speed: 2500 - 4500 rpm, starts automatically when rubber cup is pressed and stops once vessel is removed
SA7 Vortex mixer, fixed speed: 2500 rpm, starts automatically when rubber cup is pressed and stops once vessel is removed
SA8 Vortex mixer, adjustable speed: 200 - 2500 rpm, intermittent or continuous mode
SA8/1 Accessory pack for SA8: plastic cradle for multi well plates (speed limit: 800 rpm), circular foam insert for beakers and flasks (up to 500 ml), rectangular foam insert (8 x 0.2 ml, 8 x 0.5 ml and 16 x 1.5 ml tubes), solid rectangular foam insert (blank for custom holes)
5
Hotplates Available with silicon metal alloy (robust for daily use) or ceramic platform-surface (better chemical resistance,
higher temperatures) Analogue or digital control Microprocessor controlled temperature
US150 UC150 CB500 SB500
Cat. No. Description
US150 Hotplate with aluminium/silicon alloy top, analogue, LED display, max. temperature: 325 °C, platform/heated area: 150 x 150 mm, flashing “hot“ warning light, compatible with SCT1 temperature controller (page 8), integral fitting for optional retort rod (page 7), shaped bottom to place optional retort base underneath the unit
UC150 Hotplate with glass ceramic top, analogue, LED display, max. temperature: 450 °C, platform: 150 x 150 mm, heated area: 120 x 120 mm, flashing “hot“ warning light, compatible with SCT1 temperature controller (page 8), integral fitting for optional retort rod (page 7), shaped bottom to place optional retort base underneath the unit
SD160 Hotplate with robust aluminium top, digital, accurate temperature (± 0.2 °C at 37 °C), max. temperature: 325 °C, platform/heated area: 160 x 160 mm, flashing “hot“ warning light, integral fitting for optional retort rod (page 7)
CB300 Hotplate with glass ceramic top, analogue, max. temperature: 450 °C, platform: 300 x 300 mm, heated area: 200 x 200 mm, flashing “hot“ warning light, integral fitting for optional retort rod (page 7)
SB300 Hotplate with aluminium/silicon alloy top, analogue, max. temperature: 300 °C, platform/heated area: 300 x 300 mm, flashing “hot“ warning light, integral fitting for optional retort rod (page 7)
CB500 Large hotplate with glass ceramic top, analogue, for up to 30 x 100 ml beakers, max. temperature: 375 °C, platform: 300 x 500 mm, heated area: 250 x 450 mm, flashing “hot“ warning light
SB500 Hotplate with aluminium/silicon alloy top plate, analogue, for up to 30 x 100 ml beakers, max. temperature: 300 °C, platform/heated area: 300 x 500 mm, flashing “hot“ warning light
SD300 Hotplate with metal top, digital, max. temperature: 300 °C, platform/heated area: 300 x 300 mm, flashing “hot“ warning light, integral fitting for optional retort rod (page 7)
SD500 Hotplate with metal top, digital, max. temperature: 300 °C, platform: 300 x 500 mm, heated area: 300 x 500 mm, flashing “hot“ warning light
Infrared Hotplate Hotplate, PTFE body with glass ceramic plate
CR300 CP300
Cat. No. Description
CR300 Infrared hotplate with ceramic top, saving energy and time,ideal for heating large volumes of liquid, platform: 300 x 300 mm, heated area: 140 mm diameter, flashing “hot“ warning light
CP300 PTFE construction with glass ceramic plate, analogue, max. temperature: 400 °C, platform: 300 x 300 mm, heated area: 200 x 200 mm, flashing “hot“ warning light, highly acid resistant, sealed construction, separate controller
→ Optional accessories: see pages 7 and 8.
6
Magnetic Stirrers with Hotplate
UC152D CR302 SB162-3
Cat. No. Description
US152 Magnetic stirrer with aluminium/silicon alloy top hotplate, analogue, LED display, max. temperature: 325 °C, platform/heated area: 150 x 150 mm, flashing “hot“ warning light, stirrer speed: 100 - 2000 rpm, max. stirring capacity: 15 l, compatible with SCT1 temperature controller (page 8), integral fitting for optional retort rod (page 7), shaped bottom to place optional retort base underneath the unit
US152/KIT US152 with SCT1 temperature controller, probe holder SCT1/1 (page 8), and retort rod SR1 (page 7).
UC152 Magnetic stirrer with glass ceramic top hotplate, analogue, LED display, max. temperature: 450 °C, platform: 150 x 150 mm, heated area: 120 x 120 mm, flashing “hot“ warning light, stirrer speed: 100 - 2000 rpm, max. stirring capacity: 15 l, compatible with SCT1 temperature controller (page 8), integral fitting for optional retort rod (page 7), shaped bottom to place optional retort base underneath the unit
UC152/KIT UC152 with SCT1 temperature controller, probe holder SCT1/1 (page 8), and retort rod SR1 (page 7).
US152D Magnetic stirrer with aluminium/silicon alloy top hotplate, digital, LED display, max. temperature: 325 °C, platform/heated area: 150 x 150 mm, flashing “hot“ warning light, stirrer speed: 100 - 2000 rpm, max. stirring capacity: 15 l, compatible with SCT1 temperature controller (page 8), integral fitting for optional retort rod (SR1), shaped bottom to place optional retort base underneath the unit
US152D/KIT US152D with SCT1 temperature controller, probe holder SCT1/1 (page 8), and retort rod SR1 (page 7).
UC152D Magnetic stirrer with glass ceramic top hotplate, digital, LED display, max. temperature: 450 °C, platform: 150 x 150 mm, heated area: 120 x 120 mm, flashing “hot“ warning light, stirrer speed: 100 - 2000 rpm, max. stirring capacity: 15 l, compatible with SCT1 temperature controller (page 8), integral fitting for optional retort rod (page 7), shaped bottom to place optional retort base underneath the unit
UC152D/KIT UC152D with SCT1 temperature controller, probe holder SCT1/1 (page 8), and retort rod SR1 (page 7).
CD162 Magnetic stirrer with glass ceramic top hotplate, digital, max. temperature: 450 °C, platform: 160 x 160 mm, heated area: 120 x 120 mm, flashing “hot“ warning light, stirrer speed: 200 - 1300 rpm, max. stirring capacity: 15 l, integral fitting for optional retort rod (page 7), supplied with PTFE coated probe and 2 x 25 mm PTFE coated stirrer bars
SD162 Magnetic stirrer with aluminium/silicon alloy top hotplate, digital, max. temperature: 300 °C, platform/heated area: 160 x 160 mm, flashing “hot“ warning light, stirrer speed: 200 - 1300 rpm, max. stirring capacity: 15 l, integral fitting for optional retort rod (page 7), supplied with PTFE coated probe and 2 x 25 mm PTFE coated stirrer bars
SB162-3 3-Position magnetic stirrer with aluminium/silicon alloy top hotplate, analogue, space saving unit with 3 independently controlled stirring/heating positions, max. temperature: 325 °C, each platform/heated area: 160 x 160 mm, separate “hot” warning lights for each plate, stirrer speed: 100 - 1500 rpm, max. stirring capacity: 15 l, integral fitting for optional retort rod (page 7) for each position, supplied with 3 x 25 mm PTFE coated stirrer bars
CB302 Magnetic Stirrer with large glass ceramic top hotplate, analogue, designed for big beakers, max. temperature: 450 °C, platform: 300 x 300 mm, heated area: 200 x 200 mm, flashing “hot“ warning light, stirrer speed: 100 - 1500 rpm, max. stirring capacity: 15 l, integral fitting for optional retort rod (page 7), supplied with 2 x 25 mm PTFE coated stirrer bars
SB302 Magnetic stirrer with aluminium/silicon alloy top hotplate, analogue, designed for big beakers, max. temperature: 300 °C, platform/heated area: 300 x 300 mm, flashing “hot“ warning light, stirrer speed: 100 - 1500 rpm, max. stirring capacity: 15 l, integral fitting for optional retort rod (page 7), supplied with 2 x 25 mm PTFE coated stirrer bars
CR302 Magnetic stirrer with ceramic top infrared hotplate, saves time and energy, fast heating of big volumes, platform: 300 x 300 mm, heated area: 140 mm diameter, flashing “hot“ warning light, stirrer speed: 100 - 1500 rpm, max. stirring capacity: 15 l, integral fitting for optional retort rod (page 7), supplied with 2 x 25 mm PTFE coated stirrer bars
→ Optional accessories: see pages 7 and 8.
7
Magnetic Stirrers without Hotplate Compact and large models available
Available with silicon metal alloy (robust for daily use)or ceramic platform-surface (better chemicalresistance, higher temperatures)
US151 SM27 SB161-3
Cat. No. Description
SM5 Mini magnetic stirrer (w x d x h: 143 x 143 x 66 mm), analogue, polypropylene body with chemical resistant polycarbonate top, stirrer speed: 350 - 2000 rpm, max. stirring capacity: 1 l, available in a choice of designs, further details on request
US151 Magnetic stirrer with stainless steel plate, platform: 150 x 150 mm, stirrer speed: 100 - 2000 rpm, max. stirring capacity: 15 l, integral fitting for optional retort rod (see below), shaped bottom to place optional retort base underneath the unit
UC151 Magnetic stirrer with glass ceramic platform, platform: 150 x 150 mm, stirrer speed: 100 - 2000 rpm, max. stirring capacity: 15 l, integral fitting for optional retort rod (see below), shaped bottom to place optional retort base underneath the unit
SB161-3 3-Position magnetic stirrer with stainless steel platform, analogue, unit with 3 independently controlled stirring positions, platform: 550 x 210 mm, stirrer speed: 100 - 1500 rpm, max. stirring capacity: 3 x 2 l or 15 l in a flat bottomed 20 l beaker, integral fitting for optional retort rod (see below) for each position, supplied with 3 x 25 mm PTFE coated stirrer bars
SB301 Large and powerful magnetic stirrer for max. stirring capacity of 30 l, with stainless steel platform, robust construction, platform: 300 x 300 mm, stirrer speed: 100 - 600 rpm, electronic feedback speed control which accurately maintains the set speed, supplied with 1 x 100 mm PTFE coated stirrer bar, integral fitting for optional retort rod (see below)
SM27 Portable magnetic stirrer, chemically resistant ABS case, powered by battery or mains power (mains and car battery adaptor has to be ordered separately, see below), tough, compact and light weight, variable speed up to 1300 rpm, ideal for use inside incubators, glove boxes or in the field, supplied with 4 alkaline batteries and 1 x 25 mm PTFE coated stirrer bar
Accessories for SM27 SM27/2 Mains adapter for 230 V SM27/3 Mains adapter for car battery (12 V)
→ Optional accessories: see below and next page.
Accessories for Hotplates and Magnetic Stirrers
Retort rods and temperature probes
Cat. No. Description
SR1 Retort rod, 600 mm length x 12 mm diameter
SR2 Retort rod, 300 mm length x 12 mm diameter
SR3 Retort rod bracket
S2 Tongs for flask
S4 Tongs for beaker
S6 Tongs for furnace
CD162/1 Stainless steel probe for CD162 and SD162 (see page 6)
CD162/2 PTFE probe for CD162 and SD162 (see page 6)
→ Further accessories: see next page.
8
Accessories for Hotplates and Magnetic Stirrers
Heating Blocks for Round Bottom Flasks (Round bottom flasks available on request.)
Compatible with hotplates US150 and UC150 (see page 5) and withthe magnetic stirrers with hotplate US152, UC152, US152D and UC152D (see page 6)
Designed to turn your hotplate into a heating mantle
For temperatures up to 450 °C
Range of sizes available up to 500 ml
Flexible modular system, suitable for many applications
Good chemical resistance
Cat. No. Description
SHB100KIT9 Heating blocks kit, including flat base plate SHB100BASE and inserts for 3 x 25 ml, 3 x 50 ml and 3 x 100 ml round bottom flasks
SHB100KIT3 Heating blocks kit, including flat base plate SHB100BASE and inserts for 1 x 25 ml, 1 x 50 ml, and 1 x 100 ml round bottom flasks
SHB250KIT6 Heating blocks kit, including flat base plate SHB250BASE and inserts for 3 x 100 ml and 3 x 250 ml round bottom flasks
SHB250KIT3 Heating blocks kit, including flat base plate SHB250BASE and inserts for 3 x 250 ml round bottom flasks
SHB100BASE Heating blocks flat base for inserts for up to 100 ml round bottom flasks
SHB250BASE Heating blocks flat base for inserts for up to 250 ml round bottom flasks
SHB5ML 3 Inserts for SHB100BASE and SHB250BASE, for 5 ml round bottom flasks
SHB10ML 3 Inserts for SHB100BASE and SHB250BASE, for 10 ml round bottom flasks
SHB25ML 3 Inserts for SHB100BASE and SHB250BASE, for 25 ml round bottom flasks
SHB50ML 3 Inserts for SHB100BASE and SHB250BASE, for 50 ml round bottom flasks
SHB100ML 3 Inserts for SHB100BASE and SHB250BASE, for 100 ml round bottom flasks
SHB250ML 3 Inserts for SHB100BASE and SHB250BASE, for 250 ml round bottom flasks
SHB100CLAMP 3-Position clamp for use with SHB100BASE
SHB250CLAMP 3-Position clamp for use with SHB250BASE
SHB1000KIT Large heating blocks kit, including flat base plate SHB1000BASE and inserts for 1 x 50 ml, 1 x 100 ml, 1 x 250 ml, and 1 x 500 ml round bottom flasks
SHB1000BASE Heating blocks flat base for a single insert, for up to 500 ml round bottom flasks, with heat resistant handle
SHB50C 1 Insert for SHB1000BASE, for 50 ml round bottom flasks
SHB100C 1 Insert for SHB1000BASE, for 100 ml round bottom flasks
SHB250C 1 Insert for SHB1000BASE, for 250 ml round bottom flasks
SHB500C 1 Insert for SHB1000BASE, for 500 ml round bottom flasks
SCT1 Temperature Controller For the accurate temperature control of aqueous or oil based samples up to a maximum of 200 °C. Usable with US150, UC150, US152, UC152, US152D and UC152D. The SCT1 is automatically recognized by these units as soon as the SCT1 is connected. Bright, easy to read LED display. The SCT1 features an in-built clamp allowing the controller to be mounted either on a horizontal or vertical retort rod.
SCT1 SCT1 with US152
Cat. No. Description
SCT1 Temperature controller for US150, UC150, US152, UC152, US152D, and UC152D, supplied as standard with stainless steel probe, type of sensor PT100, temperature range: 20 °C - 200 °C, accuracy: ± 0.5 °C, resolution: 1 °C
SCT1/1 Probe holder
SCT1/2 PTFE probe
SCT1/1/MP Stainless steel probe
9
Water Baths Temperature range: Ambient + 5 C ° - 99.9 °C Temperature stability: ± 0.5 °C Digital display and selection of temperature Integral drain Heater mounted underneath the tank to allow easy cleaning Low level water sensor Supplied with robust polycarbonate lid Optional stainless steel lid on request
SWB6D
Cat. No. Description
SWB6D Water Bath, digital, 6 l, internal dimensions (w x d x h): 300 x 150 x 200 mm SWB15D Water Bath, digital, 15 l, internal dimensions (w x d x h): 300 x 325 x 200 mm SWB24D Water Bath, digital, 24 l, internal dimensions (w x d x h): 300 x 500 x 200 mm
Shaking Water Bath and Accessories Digital display and selection of temperature Choice of linear or orbital shaking action (depending on used platform) Temperature range: Ambient + 5 °C - 100 °C / ± 0,25 °C Capacity: 24 Liters Shaking speed: 20 - 200 rpm Shaking orbit/amplitude: 20 mm Low-level water sensor Integral drain Heater mounted underneath the tank to allow easy cleaning Internal dimensions (w x d x h): 300 x 500 x 200 mm
SBS40
Cat. No. Description
SBS40 Digital shaking water bath without platform (platform has to be ordered separately)
Platforms for SBS40 SBS40/1 Platfrom, linear shaking action SBS40/2 Platform, orbital shaking action SBS40/3 Platform, perforated, only required to use SBS40 as static bath
Covers for SBS40 SBS40/4 Polycarbonat cover, hinged
Test tube racks for SBS40 (2 racks can be used on a platform) SBS40/5 Test tube rack, for 143 x 1.5 ml micro tubes SBS40/6 Test tube rack, for 120 x 13 mm culture tubesSBS40/7 Test tube rack, for 72 x 16 mm culture tubesSBS40/8 Test tube rack, for 56 x 15 ml centrifuge tubesSBS40/9 Test tube rack, for 30 x 26 mm culture tubesSBS40/10 Test tube rack, for 25 x 50 ml centrifuge tubes
SBS40/1 SBS40/2 SBS40 Accessory tube racks
→ Further water baths in our product range.
10
Heating Mantles
Controlled up to 450 °C For round bottom flasks from 50 ml to 2000 ml Robust lightweight, easy to clean aluminium casing Integrated clamp fitting Emergency switch off which will automatically trigger in the event
of a spillage
Cat. No. Description
HM50C Heating mantle for 50 ml round bottom flasks
HM100C Heating mantle for 100 ml round bottom flasks
HM250C Heating mantle for 250 ml round bottom flasks
HM500C Heating mantle for 500 ml round bottom flasks
HM1000C Heating mantle for 1000 ml round bottom flasks
HM2000C Heating mantle for 2000 ml round bottom flasks
See-through Incubators Incubators without base (optionally available) can be placed easily over complete instruments or full test assemblies
Constructed from clear Acrylic® polymer for total visibility
Analogue or digital model
Forced air circulation and electronic temperature control ensure accuratelymaintained conditions
Temperature range: Ambient + 5 °C - 60 °C, ± 0.1 °C (at 37 °C)
Nominal volume: 60 liters
Temperature safety cut-out set at 72 °C
Upward opening door, can be opened completely or only the front
Dimensions overall/internal (w x d x h): 600/450 x 390/380 x 390/380 mm
SI60D with SI60/2
Cat. No. Description
SI60 See-trough incubator with analogue control
SI60D See-trough incubator with digital control and LCD display
SI60/1 Acrylic® base plate
SI60/2 Plastic coated shelf/rack system with 2 shelves
SI60/5 Water tray for SI60 and SI60D
Incubator for Multi-well Plates and Petri Dishes Compact unit with stainless steel interior
Dimensions overall/internal (w x d x h): 380/250 x 380/230 x 435/200 mm
Laminar flow air circulation, water tray to increase humidity
Water tray that avoids drying out of samples
Temperature range: Ambient + 8 °C - 80 °C, ± 0.5 °C (at 37 °C)
Nominal capacity: 20 Liters, for 24 plates (or 48 plates if stacked in 2 layers)
Digital setting and display of temperature (display resolution 0.1 °C)
Over temperature protection
Upward opening door SI19
Cat. No. Description
SI19 Incubator for multi-well plates and petri dishes, supplied with 4 shelves and water tray
11
Incubators with Shakers
SI500 SI600 SI505
Cat. No. Description
SI500 Incubator with orbital shaker, supplied with retractable platform (with securing bars) for easy loading and unloading, for 12 x 250 ml, 9 x 500 ml, or 6 x 1000 ml flasks, temperature range: ambient + 5 °C - 60 °C (± 0.5 °C), speed range: 30 - 300 rpm, orbit diameter: 16 mm, digital display for temperature and speed (temperature display resolution: 0.1 °C), integrated timer with alarm (1 second to 9 days), platform size: 335 x 335 mm, max. load: 10 kg, USB connection, dimensions overall/internal (w x d x h): 450/422 x 474/408 x 522/297 mm
Incubator also available with IQ/OQ documentation, price on request.
SI600 Incubator with orbital shaker, supplied with retractable platform (with securing bars) for easy loading and unloading, for 15 x 500 ml, 9 x 1000 ml, or 2 x 2000 ml flasks, temperature range: ambient + 5 °C - 60 °C (± 0.5 °C), speed range: 30 - 300 rpm, orbit diameter: 16 mm, digital display for temperature and speed (temperature display resolution: 0.1 °C), integrated timer with alarm (1 second to 9 days), platform size: 526 x 390 mm, max. load: 10 kg, USB connection, dimensions overall/internal (w x d x h): 675/623 x 542/465 x 642/395 mm
Incubator also available with IQ/OQ documentation, price on request.
Stainless steel tube racks with Magnalock coupling system for SI500 and SI600
SI500/1 Tube rack for 64 x 1.5 ml micro tubes, adjustable angle: up to 30 °
SI500/2 Tube rack for 25 x 15 ml centrifuge tubes, adjustable angle: up to 30 °
SI500/3 Tube rack for 12 x 50 ml centrifuge tubes, adjustable angle: up to 30 °
SI500/4 Tube rack for 16 x 30 ml universal plastic containers, adjustable angle: up to 30 °
SI505 Incubator shaker with high speed shaking action 250 – 1250 rpm ideal for multi-well plates and micro tubes, supplied with retractable stainless steel platform (220 x 220 mm) for easy loading and unloading, for 4 multi-well plates or 2 tube racks (see below), temperature range: ambient + 7 °C - 60 °C (± 0.5°C at 37 °C), orbit diameter: 1.5 mm, digital display for temperature and speed (temperature display resolution: 0.1 °C), integrated timer with alarm (1 second to 9 days), max. load: 1.5 kg, USB connection, stainless steel water trays to reduce evaporation, dimensions overall/internal (w x d x h): 361/307 x 405/300 x 430/190 mm
Incubator also available with IQ/OQ documentation, price on request.
Tube racks for SI505
SSM5/1 Tube rack for 50 x 1.5 ml tubes
SSM5/2 Tube rack for 50 x 0.5 ml tubes
SSM5/3 Tube rack for 50 x 0.2 ml tubes
→ Wide range of further incubators for cell cultures (CO2), roller apparatus, plants, drosophila, etc. in our product range. Contact us for further information.
12
Cooled Incubator with Shaker Compact unit with acrylic® windows in the door and on both sides
In combination with the SRC4 recirculating cooler (optionally available,see page 20) or an equivalent recirculating cooler, the incubator canoperate at temperatures: Ambient - 15 °C to 60 °C, ± 0.5 °C
Lowest temperature with recirculating cooler: + 5 °C
Speed range: 30 - 300 rpm (orbital motion)
Retractable platform with securing bars (520 x 390 mm) foreasy loading and unloading
Platform suitable for 6 x 2000 ml, 9 x 1000 ml or 15 x 500 ml flasks,max. load 10 kg, max. flask height: 320 mm
Optional available stainless steel racks with Magnalock couplingsystem for use with 1.5 ml, 15 ml, and 50 ml tubes
Integrated timer with alarm (1 second - 9 days)
Digital display for temperature and speed
USB connection with dedicated software for temperature monitoring
Dimensions overall/internal (w x d x h): 675/625 x 562/455 x 640/380 mm
Incubator also available with IQ/OQ documentation, price on request.
Cat. No. Description
SI600C Cooled incubator with orbital shakerSRC4 Recirculating cooler, bath capacity 3 liters, pump rate 9 liters/minute (see also page 20)
SI500/1 Tube rack for 64 x 1.5 ml micro tubes, adjustable angle: up to 30 ° SI500/2 Tube rack for 25 x 15 ml centrifuge tubes, adjustable angle: up to 30 ° SI500/3 Tube rack for 12 x 50 ml centrifuge tubes, adjustable angle: up to 30 ° SI500/4 Tube rack for 16 x 30 ml universal plastic containers, adjustable angle: up to 30 °
Hybridisation Incubator (with combined rocker shaker) Temperature range: Ambient + 8 °C - 80 °C, ± 0.1 °C (at 37 °C)
Stainless steel interior, nominal capacity: 20 Liters
Digital setting and display of temperature (resolution: 0.1 °C), analogue setting of speed
Over temperature protection
Supplied with rotisserie for 7 x 40 mm diameter hybridisation bottles,further rotisserie for 2 x 75 mm diameter hybridisation bottles available
Easy conversion to rocker shaker: remove rotisserie, pull forward rear platform
Rotational speed range: 2 - 10 rpm, rocker speed range: 5 - 70 oscillations/minute
Upward opening door
Dimensions overall/internal (w x d x h): 380/286 x 380/230 x 435/200 mm SI30H
Cat. No. Description
SI30H Hybridisation incubator, supplied with rocker and rotisserie SI20H/1 (see below)
SI20H/1 Rotisserie for 7 x 40 mm diameter hybridisation bottles (without bottles!)
SI20H/2 Rotisserie for 2 x 75 mm diameter hybridisation bottles (without bottles!)
Hybridisation bottles made from Pyrex® borosilicate glass, polyester caps, PTFE seals
SI20H/3 Hybridisation bottle, length 260 mm, outer/inner diameter 40 mm / 33.6 mm
SI20H/4 Hybridisation bottle, length 260 mm, outer/inner diameter 75 mm / 68.6 mm
SI20H/5 Hybridisation bottle, length 170 mm, outer/inner diameter 40 mm / 33.6 mm
→ Further incubators in our product range. Information on request.
13
Water Stills
A4000/220
D4000
W4000
Aquatron® Fully automatic operation Safety features allow unattended operation High quality borosilicate glassware coupled with silica sheathed heaters
gives pyrogen-free distillate of the highest purity Low temperature distillate 3 versions available: for 4 l or 8 l single distilled water per hour,
or for 4 l double distilled water per hour Operates from any raw water supply Reservoir level control Simple conversion to pre-treated feed (see WCK/N) Supplied with wall mounting bracket Simple to clean pH: 5.0 - 6.5
Distinction Water Still Produces pyrogen-free water 4 l single distilled water per hour All glass construction silica sheated heaters 2 independent safety thermostats prevent overheating Control device turns off heater when collecting reservoir is full Wall mountable pH: 5.0 - 6.5
Merit Water Still Produces pyrogen-free water 4 l single distilled water per hour Glass construction with long life metal heater 2 independent safety thermostats prevent overheating Wall mountable pH: 5.0 - 6.5
Cat. No. Description
A4000 Aquatron®, 4 l single distilled water/hour, w x d x h: 550 x 240 x 410 mm
A8000 Aquatron®, 8 l single distilled water/hour, w x d x h: 550 x 240 x 410 mm
A4000D Aquatron®, 4 l double distilled water/hour, w x d x h: 550 x 410 x 410 mm
D4000 Distinction Water Still, 4 l single distilled water/hour, w x d x h: 540 x 160 x 410 mm, 220 V
W4000 Merit Water Still, 4 l single distilled water/hour, w x d x h: 500 x 150 x 450 mm, 220 V
WR20 Pyrex® glass reservoir bottle (20 l) supplied complete with PTFE stopcock, bottle closure fitted with connections for distillate inlet pipe, reservoir level control and a 0.2 µm filter on the air inlet. Autoclavable at 121 °C
WS20 Stand for WR20, height: 43 cm
→ Further accessories for Aquatron® on request.
Mini Centrifuge Adjustable speed: 0 - 13,500 rpm Timer and pulse start, programmable For safety, the lid remains locked while motor is in motion Supplied with 1 rotor for 12 x 1.5 ml/2.2 ml tubes Optional strip tube rotor available (see below)
Cat. No. Description
SCF2 Mini Centrifuge, with 1 rotor for 12 x 1.5 ml/2.2 ml tubes
SCF2/2 Strip tube rotor, 4 x 0.2 ml 8-tube strip SCF2/1/02 0.2 ml tube adapters SCF2/1/05 0.5 ml tube adapters
14
Overhead Stirrers with Accessories
SS10 SS10/1 & SS10/2 SS10/11 SS10/14 SS10/10 SS10/12 SS10/13
Cat. No. Description
SS10 Overhead stirrer, general purpose, for 15 l aqueous to low viscosity liquids, 100 - 2000 rpm
SS20 Overhead stirrer, high performance, for 25 l low to medium viscosity liquids, 100 - 2000 rpm
SS30 Overhead stirrer, dual torque, for 40 l medium to high viscosity liquids, 50 - 500 rpm (mode 1, high torgue), 100 - 2000 rpm (mode 2, low torque)
SS10/1 Stand, general purpose SS10/2 Stand, heavy dutySS10/5 Paddle rod, 350 mm SS10/6 Paddle rod, 550 mm SS10/10 Small paddle head, width: 60 mm SS10/11 Large paddle head, width: 94 mm SS10/12 Large propeller head, (2 blade), width: 80 mm SS10/13 Small propeller head (4 blade), width: 50 mm SS10/14 Anchor paddle head, width: 60 mm
Rockers All units can be used in incubators with max. temperature of 40 °C and max. humidity of 80 %.
SSM3 with SSM3/1 SSM4 SSL3 SSL4
Cat. No. Description
SSM3 Mini-Rocker, 3D gyratory motion, speed range: 5 - 70 rpm, angle of tilt: 3 ° - 12 °, platform with non-slip mat: 235 x 235mm, max. load: 3 kg, optional accessory tier system available (see below), dimensions (w x d x h): 240 x 300 x 165 mm
SSM4 Mini-Rocker, see-saw wave motion, speed range: 5 - 70 rpm, angle of tilt: 7 °, platform with non-slip mat: 235 x 235mm, max. load: 3 kg, optional accessory tier system available (see below), dimensions (w x d x h): 240 x 300 x 150 mm
SSL3 Rocker, 3D gyratory motion, speed range: 5 - 70 rpm, angle of tilt: 3 ° - 12 °, platform with non-slip mat: 355 x 355mm, max. load: 10 kg, optional accessory tier system available (see below), dimensions (w x d x h): 360 x 420 x 170 mm
SSL4 Rocker, see-saw wave motion, speed range: 5 - 70 rpm, angle of tilt: 7 °, platform with non-slip mat: 335 x 335 mm, max. load: 10 kg, optional accessory tier system available (see below), dimensions (w x d x h): 360 x 420 x 160 mm
Tier system for rockers
SSM3/1 Tier system, 2 platforms plus 8 bars, for SSM3 and SSM4
SSL3/1 Tier system, 2 platforms plus 8 bars, for SSL3 and SSL4
15
Shakers All units can be used in incubators with max. temperature of 40 °C and max. humidity of 80 %.
SSM1 SSM5 SSL5 SSL1 SSL2
Cat. No. Description
SSM1 Orbital shaker, smooth shaking action ideal for samples of 0.5 - 5 ml in multiwell plates, dishes, and petri dishes, speed range: 30 - 300 rpm, orbit diameter: 16 mm, platform with non-slip mat: 220 x 220 mm, max. load: 3 kg, digital timer (1 second - 9 hours, or continuous operation), with optional available platform SSM1/1 (see below) also usable with flasks, dimensions (w x d x h): 240 x 300 x 140 mm
Optional accessories for SSM1
SSM1/1 Accessory cradle with 4 securing bars, for 4 x 250 ml, or 2 x 500 ml, or 1 x 1000 ml flasks
SSM1/2 Large platform, holds up to 8 plates, 345 x 259 mm SSM1/3 Clear acrylic® lid
SSM5 Orbital shaker for up to 4 multi-well plates, speed range: 250 - 1250 rpm, orbit diameter: 1.5 mm, platform with non-slip mat: 220 x 220 mm, max. load: 1 kg, digital timer (1 second - 9 hours, or continuous operation), with optional available tube holders (see below) usable with 0.2 - 1.5 ml tubes, dimensions (w x d x h): 240 x 300 x 160 mm
SSL5 Orbital shaker for up to 8 multi-well plates, speed range: 250 - 1250 rpm, orbit diameter: 1.5 mm, platform with non-slip mat: 306 x 306 mm, max. load: 2 kg, digital timer (1 second - 9 hours, or continuous operation), with optional available tube holders (see below) usable with 0.2 - 1.5 ml tubes, dimensions (w x d x h): 360 x 420 x 160 mm
Optional accessories for SSM5 and SSL5
SSM5/1 Tube holder for 50 x 1.5 ml tubes SSM5/2 Tube holder for 50 x 0.5 ml tubes SSM5/3 Tube holder for 50 x 0.2 ml tubes
SSL1 Orbital shaker for bottles, flasks, and similar types of vessels, speed range: 30 - 300 rpm, orbit diameter: 16 mm, supplied with cradle type platform (335 x 335 mm) with 4 securing bars, suitable for 12 x 250 ml, or 9 x 500 ml, or 6 x 1000 ml, or 2 x 2000 ml flasks, max. load: 10 kg, digital timer (1 second - 9 hours, or continuous operation), platform capacity can be increased by using optional available platform SSl1/1 (see below), dimensions (w x d x h): 360 x 420 x 270 mm
Optional accessories for SSL1
SSL1/1 Large platform (510 x 510 mm) with 6 securing bars, suitable for 30 x 250 ml, or 16 x 500 ml, or 9 x 1000 ml, or 4 x 2000 ml flasks Note: the use of this platform reduces the speed of SSl1 to a max. of 150 rpm
SSL1/2 Flat platform with non-slip mat, without cradle, 350 x 350 mm
SSL2 Reciprocating shaker for bottles, flasks, and similar types of vessels, construction and control identical to SSL1 (see above), speed range: 25 - 250 rpm, orbit diameter: 20 mm, max. load: 10 kg, digital timer (1 second - 9 hours, or continuous operation), dimensions (w x d x h): 360 x 420 x 270 mm
→ Wide range of further shakers in our portfolio.
16
Flask Shaker Ideal for extractions
For up to 8 x 500 ml flasks
Vigorous shaking action: 8 - 800 oscillations/minute
Maximum load: 3 kg
Electronic feedback control for constant speed irrespective of load
Timer (10 - 60 minutes) or continuous operation
4 rubber feet to absorb vibration
Cat. No. Description
SF1 Flask shaker, supplied with 2 side-arms, eight clamps, and Allen key
Rotator Drive Unit with Drums
STR4 STR4 with STR4/1 STR4 with STR4/2
STR4 with STR4/3 STR4 with STR4/4 STR4 with STR4/5
Cat. No. Description
STR4 Rotator drive unit, highly versatile, accepts a choice of 5 drums (not included, have to be ordered separately, see below), rotation speed 6 - 60 rpm, max. load: 3kg, built-in timer: 10 - 60 minutes, or continuous operation
STR4/1 Drum to hold test tube clip plates, end-over-end rotation of tubes, can hold up to 4 plates fitted with tube clips (not included have to be ordered separately, see below)
STR1/1 2 clip plates for 12 x 12 mm tubes
STR1/2 2 clip plates for 10 x 16 mm tubes
STR1/3 2 clip plates for 8 x 19 mm tubes
STR1/4 2 clip plates for 7 x 24 mm
STR4/2 Drum with 2 platforms to hold bottles or flasks, end-over-end mixing of 2 bottles up to 250 ml
STR4/3 Drum with figure 8 mixing action, for one vessel up to 200 mm in length and 120 mm diameter, vessel is held at a 45 ° angle so it is rolled and turned end-over-end at the same time giving a vigorous figure 8 of mixing action
STR4/4 Drum with 4 segment cradles holding up to 4 bottles or containers up to 300 mm in length and 120 mm diameter, drum holds vessel in horizontal position
STR4/5 Drum for 1.5 ml tubes, with 4 segment cradles and 4 tube racks (each for 60 x 1.5 ml tubes, end-over-end movement
SW2/1 Spare rack for 60 x 1.5 ml tubes, for STR4/5
17
Rotators Can be used in incubators up to 60 °C and in cool rooms down to 4 °C.
SB2 with SB3/2 Tube holders
Cat. No. Description
SB2 Rotator for tubes (1.5 - 50 ml), fixed speed: 20 rpm, fully adjustable mixing angle, tube holders not included, have to be ordered separately (see below)
SB3 Rotator for tubes (1.5 - 50 ml), digital speed control, variable speed: 2 - 40 rpm, fully adjustable mixing angle, digital timer, tube holders not included, have to be ordered separately (see below)
Tube holders for SB2 and SB3
SB3/1 Tube holder, end-over-end action, for 40 micro tubes with Ø = 10 - 11.5 mm
SB3/2 Tube holder, end-over-end action, for 20 test/blood tubes with Ø = 9 - 20 mm
SB3/3 Tube holder, end-over-end action, for 12 x 50 ml centrifuge tubes with Ø = 25 - 35 mm
SB3/4 Tube holder, rolling action, for 63 culture tubes with Ø =12 mm
SB3/5 Tube holder, rolling action, for 36 culture tubes with Ø = 16 mm
SB3/6 Tube holder, rolling action, for 30 culture tubes with Ø = 26 mm
SB3/DUAL Multiple tube holder accessory
SB3/1/PC Spare clips for SB3/1 holder (20 clips)
Roller Mixers For a gentle, but highly efficient, rocking and rolling action. With removable rolls to adjust the unit also for bigger vessels and removable side panels that ensure the sample bottles do not slide off the roller mixers during operation. All models can be used in incubators up to 60 °C and humidity up to 80 % or in cooling rooms down to 4 °C
SRT6D with removable side panels and detachable roller tubes
SRT9D SRT6D & SRT9stacked with SRT/STACK
Cat. No. Description
SRT6 Roller mixer, 6 rollers, analogue control, fixed speed: 33 rpm, max. load: 5 kg, without timer, usable for continuous operation, dimensions (w x d x h): 565 x 240 x 110 mm
SRT6D Roller mixer, 6 rollers, digital control, variable speed: 5 - 60 rpm, max. load: 5 kg, with timer, usable for continuous operation, dimensions (w x d x h): 565 x 240 x 110 mm
SRT9 Roller mixer, 9 rollers, analogue control, fixed speed: 33 rpm, max. load: 5 kg, without timer, usable for continuous operation, dimensions (w x d x h): 565 x 360 x 110 mm
SRT9D Roller mixer, 6 rollers, digital control, variable speed: 5 - 60 rpm, max. load: 5 kg, with timer, usable for continuous operation, dimensions (w x d x h): 565 x 360 x 110 mm
SRT/STACK Stacking system for roller mixers, works by magnets – no need for any tools, comprises 4 magnetised stacking blocks, up to 3 roller mixers can be stacked Note: In order to stack 3 roller mixers, 2 x SRT/STACK are required
18
Flocculators and Accessories For flocculation test on water and effluent samples Digital displays for speed and, for SW6 only, time Two pre-set programs allow routine speed and time parameters input
and executing by simply pressing one button Speed range: 25 - 250 rpm Built-in illumination for easy viewing of samples Without beakers (available on request) SW5 SW6
Cat. No. Description
SW5 Flocculator for 2 samples, speed range: 25 - 250 rpm, portable, LCD display, dimensions (w x d x h): 320 x 210 x 500 mm
SW6 Flocculator for 6 samples, speed range: 25 - 250 rpm, timer: 0 - 99 minutes, LED display, dimensions (w x d x h): 750 x 210 x 460 mm
SW6/2 Simultaneous coagulant doser for SW6
Melting Point Apparatus and Accessories
SMP10 SMP11 SMP20 SMP30 NEW! SMP50
Cat. No. Description
SMP10 Melting point apparatus, digital selection and display of temperature, temperature range: ambient to 300 °C, display resolution 1 °C, up to 2 samples can be tested simultaneously, unit heats at a fixed rate of 2 °C per minute, supplied with 1 x melting point tubes SMP10/1 (see below)
SMP11 Melting point apparatus, analogue,temperature range: 50 °C - 300 °C, up to 3 samples can be tested simultaneously, manually adjustable heating rate: 1 °C to 10 °C per minute, supplied with 1 x melting point tubes SMP1/4 (see below) and thermometer
SMP20 Melting point apparatus, digital selection and display of temperature, temperature range: ambient to 300 °C, display resolution 0.1 °C, up to 2 samples can be tested simultaneously, adjustable heating rate: 1 °C to 10 °C per minute, supplied with 1 x melting point tubes SMP10/1 (see below)
SMP30 Melting point apparatus, large alphanumeric LCD display, two stage head adjustment for comfortable viewing angle, head up display shows temperature, temperature range: ambient to 400 °C, display resolution 0.1 °C, up to 3 samples can be tested simultaneously, adjustable heating rate: 0.5 °C to 10 °C per minute in 0.1 °C increments, records up to 8 events in memory for each of the 3 sample tubes, supplied with 1 x melting point tubes SMP10/1 (see below) SMP30 also available with IQ/OQ documentation – price on request.
SMP50 NEW! Automatic melting point apparatus, 7“ colour HD touch screen display, temperature range: ambient to 400 °C, display resolution 0.1 °C, up to 3 samples can be tested simultaneously, adjustable heating rate: 0.1°C to 20 °C per minute in 0.1 °C increments, memory: up to 300 results with video (additional measurement tags can be added), data can also be transferred to PC via USB stick, supplied with glass cutter (for users who prefer to use not the whole tubes) SMP50 also available with IQ/OQ documentation – price on request.
SMP11/1 Spare thermometer for SMP11, spirit filled, 0 °C - 250 °C SMP1/2 Cooling plug (brass) for rapidly reducing heating block temperature after use SMP10/1 Melting point tubes, sealed at one end (pack of 100) SMP1/4 Melting point tubes, open both ends (pack of 100)SMP2/1 Melting point tubes, sealed both ends (pack of 100)
SMP30/1 Printer for SMP30 SMP50/Printer Printer for SMP50 SMP-KIT Calibration Kit, with 3 standards: Vanillin, Sulphanilamide, and Caffeine
19
Homogenisers and Accessories
SHM1 SHM2 Accessories
Cat. No. Description
SHM1/EURO Handheld homogeniser, variable motor speed: 5,000 - 35,000 rpm, for 0.03 ml - 100 ml, can be used with polycarbonate disposable probes or stainless steel probes, net weight: 0.5 kg, dimensions (h x Ø): 160 x 55 mm
SHM2/EURO Laboratory homogeniser, variable motor speed: 5,000 - 28,0000 rpm, for 0.03 ml - 2000 ml, weight 1.6 kg, dimensions (h x Ø = 220 x 70 mm
SHM/5 Homogeniser probe, stainless steel, l x Ø: 75 x 5 mm, flat head, for 0.03 - 5 ml
SHM/7 Homogeniser probe, stainless steel, l x Ø: 115 x 7 mm, saw tooth, for 0.25 - 30 ml
SHM/10 Homogeniser probe, stainless steel, l x Ø: 115 x 10 mm, saw tooth, for 1.5 - 100 ml
SHM/20 Homogeniser probe, stainless steel, l x Ø: 195 x 20 mm, saw tooth, for 50 - 2000 ml
SHM/DISP Disposable probes (pack of 25), plastic, l x Ø: 110 x 7 mm, saw tooth, for 0.25 - 30 ml
SHM/ADAPT Adapter for disposable probes
SHM/STAND Stand compatible with SHM1/EURO and SHM2/EURO, heavy duty, base (w x d xh): 220 x 304 x 11 mm, rod (h x Ø: 610 x 16 mm, net weight: 3.6 kg
→ Wide range of glass and plastic tubes and vessels in our portfolio.Separate price lists on request.
Colony Counter
Pressure sensitive counting, confirmation by audible tone (can be turned on/off) Digital display (3 digit LED for up to 999 counts) Bright white energy saving LED lighting Choice of light or dark background Supplied with two Wolffhuegel graticules and dish centering adapters to facilitate
use with 50 mm to 90 mm dishes Averaging facility calculates average count over multiple plates Connectivity to printer or computer, USB cable supplied Optional magnifiers 1.7 x or 3.0 x (hast o be ordered separately) Dimensions (w x d x h): 310 x 300 x 140 mm Also available with IQ/OQ documentation, price on request
SC6PLUS with SC6/1
Cat. No. Description
SC6PLUS Pressure sensitive digital colony counter, for simple and accurate counting
SC6/1 1.7 x magnifier
SC6/1/3 3.0 x magnifier
→ Wide range of petri dishes also available from us.Separate price lists on request.
20
Rotary Evaporators and Accessories Speed range: 20 - 190 rpm Simple, counterbalanced lift mechanism, lift distance 150 mm PTFE/glass liquid pathway for chemical inertness Long life graphite impregnated PTFE vacuum seal Efficient flask and vapour tube ejection system Optional digital baths (3 l or 6.2 l) for rotary evaporators available (see below) RE300 with RE300DB
Cat. No. Description
RE300 Rotary evaporator with diagonal coil condenser, vapour tube for diagonal condenser, receiving flask 1 l, Florentine flask 1 l, feed tube with stopcock, vacuum seal, conical joint clip, spherical joint clip
RE301 Rotary evaporator with vertical coil condenser, vapour tube for vertical condenser, receiving flask 1 l, Florentine flask 1 l, feed tube with stopcock, vacuum seal, conical joint clip, spherical joint clip
RE302 Rotary evaporator with cold finger condenser, drain for cold finger condenser, vapour tube for cold finger condenser, receiving flask 1 l, Florentine flask 1 l, feed tube with stopcock, vacuum seal, conical joint clip, spherical joint clip
RE300P Rotary evaporator with diagonal coil condenser plastic coated, vapour tube for diagonal condenser, receiving flask 1 l plastic coated, Florentine flask 1 l plastic coated, feed tube with stopcock, vacuum seal, conical joint clip, spherical joint clip
RE301P Rotary evaporator with vertical coil condenser plastic coated, vapour tube for vertical condenser, receiving flask 1 l plastic coated, Florentine flask 1 l plastic coated, feed tube with stopcock, vacuum seal, conical joint clip, spherical joint clip
RE302P Rotary evaporator with cold finger condenser plastic coated, drain for cold finger condenser, vapour tube for cold finger condenser, receiving flask 1 l plastic coated, Florentine flask 1l plastic coated, feed tube with stopcock, vacuum seal, conical joint clip, spherical joint clip
RE300DB Digital water bath, temperature: ambient to 95 °C, capacity: 3 l
RE300OB Digital high temperature oil bath, temperature: ambient to 180 °C, capacity: 6.2 l
RE3022C Vacuum pump, ultimate pressure: 12 mbar, flow rate: 21 l/minute
→ Receiving and Florentine flasks, and further accessories on request.
Recirculating Coolers
Powerful cooling for external device e.g. electron microscopes LED display Temperature range: -20 °C to 30 °C (± 2 °C) Quiet operation Safety alarm to indicate an overload relay for the refrigeration unit Dedicated drain for easy emptying and cleaning Incorporated dust filter, can easily be accessed by removable
front panel SRC4 SRC14
Cat. No. Description
SRC4 Recirculating cooler, bath capacity: 3 l, pump rate: 9 l/minute
SRC14 Recirculating cooler, bath capacity: 14 l, pump rate: 18 l/minute
01/2017