sub: invitation of re-e-tender for procurement of medical...
TRANSCRIPT
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 1 -
TENDER NO. 40/2016
Tender No. 412.U/16/30/3/Proposal/10-11 (Medical College)/Vol V Dated: 29.09.2016.
Sub: Invitation of RE-E-tender for procurement of Medical Equipments & Instruments (Two Bid)
Period for submission of e-Tender form From 06/10/2016 to 08/11/2016 Upto 2 PM
Pre-Bid meeting 06/10/2016 & 25/10/2016 at 2.30
PM
Last Date & Time of submission of e-tender 08/11/2016 upto 2.00 PM
Date & Time of Opening of e-Tender 08/11/2016 at 2.30 PM
Bid Security / Earnest Money to be sent through
Post/Delivered in hand
As mentioned in Annexure IV
Performance security / Security Deposit Money A Sum equivalent to 10 % of the bid value
INSTRUCTIONS FOR E-TENDERING All vendors/contractors are required to procure Class-IIIB Digital Signature certificate (DSC) with Both DSC Components i.e. Signing & Encryption to participate in the E-Tenders.
a. Vendor should get Registered at https://esictenders.eproc.in (No charges). However, those vendors who had already registered earlier in the old web portal need not register again.
b. Vendor also needs to submit Bid Processing Fee charges of Rs.2495/- (non-refundable) in the form of Demand Draft from any scheduled bank, in favour of M/s C1 India Pvt. Ltd. Payable at New Delhi for participating in the Tender.
c. Vendor needs to submit the Demand Draft for bid Processing Fee at the under mentioned Registered Address for successful submission of Tender, failing which, the vendor will not be able to participate in the e-tender. Along with the Demand Draft, vendor needs to send a covering letter mentioning about the payment details, company name, address, payment towards ESIC Bid Processing Fees (mention theTender ID and Tender Title) at the under mentioned address, one day before the due date and time of bid submission:
Kind Attn: Mr Mohit Chauhan C1 India Pvt. Ltd., 301, Gulf Petro Chem Building, 1st Floor, Udyog Vihar, Phase – 2, Gurgaon, Haryana – 122015 Note: Payment will be approved only after physical receipt of Demand Draft.
d. The vendor also needs to mention his company name, address, ESIC Bid Processing fees mentioning the Tender ID and Tender Title (at the back side of the Demand Draft of Rs. 2495/-).
e. Vendors also need to send the scanned copies of Demand Draft to [email protected] mentioning their Company Name, Address, Tender ID and Tender Title for approval of Bid Processing Fees at the back side of Demand Draft.
f. The bid can be uploaded upto 2PM on dated 08/11/2016 and any bid upload after the prescribed time shall not be considered irrespective of rates. The bid will be opened on the same dated i.e. on 08/11/2016 at 2.30 PM.
g. The Bidder should carefully read, understand and seek clarifications if any before uploading the bid. No claim whatsoever will be entertained for any alleged ignorance thereof.
ESI-PGIMSR, ESIC MEDICAL COLLEGE & EMPLOYEE’S STATE INSURANCE CORPORATION HOSPITAL & ODC (EZ)
(A Statutory Body Under Ministry of Labour, Govt. of India) DIAMOND HARBOUR ROAD, P.O.: JOKA, KOLKATA-700 104
An ISO 9001:2008 Certified
Fax: 033 2467 2795, Phone: 033 2467 2799 / 6280 / 1764, Email Id- [email protected]
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 2 -
HELPDESK NUMBERS
Sl.No. Name e-mail Phone no.
1 Mr. Elavarasan Raghunathan
[email protected] +91-022-66865600/10/11/+91-8655995550
2 Ms. Anjali Thombare [email protected] +91-022-66865600/10/11
3 Mr. Vijay Kalra [email protected] +91-0124-4302034/+91-9711770455
4 Mr. Ashish Kumar [email protected] +91-0124-4302034/+91-9971556555
5 Mr. Saurav Gautam [email protected] +91-0124-4302037/+91-9911874555
6 Mr. Partha Ghosh [email protected] +91-8811093299
7 Mr. Mohit Chauhan [email protected] +91-124-4302033
FOR ESCALATIONS CONTACT
Name Email 1. Mr. Ashish Goel [email protected] 2. Mr. Nimesh Bhardwaj [email protected] 3. Mr. Achal Garg [email protected]
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 3 -
TENDER NO. 40/2016
Tender No. 412.U/16/30/3/Proposal/10-11 (Medical College)/Vol V Dated: 29.09.2016.
Sub: Invitation of RE-E-tender for procurement of Medical Equipments & Instruments (Two Bid)
From: The Medical Superintendent,
ESIC Hospital & O.D.C. (E.Z), Diamond Harbour Road, P.O.: Joka, Kolkata: 700 104.
To: ___________________________________ ___________________________________ Sir(s),
The Medical Superintendent invites open Re-e-tender for procurement of Medical Equipments & Instruments at ESIC Hospital Joka” as per specifications and/or quantities detailed
in the Schedule attached. The “Tender Documents” comprising the General Terms and Conditions of Contract (Annexure I) and the Special Terms and Conditions of Contract (Annexure II) which will
govern any contract made, the Tender Application Form (Annexure III), specification of Medical Equipments & Instruments (Annexure lV) and the Schedule of contract / specifications of items /
proforma for quoting rates (Annexure V) are enclosed herewith. If you are in a position to quote for the contract /supply in accordance with the requirements stated in the attached schedule, please submit your quotation to this office.
Tenderers are requested that, before quoting their rates or filing tender, the tender form may please be read out thoroughly (line by line), otherwise purchaser will not be held responsible for any error / oversight of his own.
The form is a Standard Form of Tender. Certain clause /clauses may not be applicable in some cases. So, Tenderers are requested to ignore such clause /clauses, which is/are not applicable in the instant case.
All the payment shall be made by Demand Draft drawn in favour of ESI Fund A/c No.1, payable at Kolkata. Cheques/cash will not be accepted.
If any modification of the schedule is considered necessary, you should communicate the same by means of separate letter sent along with the Tender.
Medical Superintendent, ESIC Hospital & ODC (E.Z), Joka, does not pledge himself to accept
the lowest or any tender and reserve to himself the right of accepting the whole or any part of the
ESI-PGIMSR, ESIC MEDICAL COLLEGE & EMPLOYEE’S STATE INSURANCE CORPORATION HOSPITAL & ODC (EZ)
(A Statutory Body Under Ministry of Labour, Govt. of India) DIAMOND HARBOUR ROAD, P.O.: JOKA, KOLKATA-700 104
An ISO 9001:2008 Certified
Fax: 033 2467 2795, Phone: 033 2467 2799 / 6280 / 1764, Email Id- [email protected]
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 4 -
tender or portion of the quantity offered and you shall supply the same / execute the work at the rate quoted by you. You are at liberty to tender for the whole or any part.
Acceptance by the purchaser shall be communicated in due course. You are requested that the
instructions contained in the said communication should be acted upon immediately / as asked for.
THE FIRM IS REQUESTED TO FOLLOW THE CHECK LIST AT THE TIME OF SUBMISSION OF TENDER DOCUMENT WITHOUT WHICH THE OFFER IS LIABLE TO BE CANCELLED.
CHECK LIST
1 Earnest Money Deposit by Demand Draft only Submitted [Yes/No]
2 Valid Trade Licence Submitted [Yes/No]
3 PAN/TAN other statutory documents Submitted [Yes/No]
4 Warranty Certificate: At least for two years[except item Sl.NO. 1 of department of anaesthesiology where warranty is mentioned in the respective specification]
Submitted [Yes/No]
5 VAT/CST certificate clearly showing the class/classes of goods/services for which VAT/CST registration has been obtained
Submitted [Yes/No]
6 Mandatory CMC for Five years after warranty Certificate along with rates[except item Sl.NO. 1 of department of anaesthesiology where warranty is mentioned in the respective specification]
Submitted [Yes/No]
7 Mandatory spare parts availability for five years after warranty Certificate Submitted [Yes/No]
8 Name & Address of Service Centre in and around Kolkata Submitted [Yes/No]
9 Certificate regarding provision of free calibration certificate for medical equipments for 07 years
Submitted [Yes/No]
10 Expected life of equipment certificate Submitted [Yes/No]
11 The Certificate that the quoted equipment have not been and are not being supplied to any other organization at a rate lower than being quoted here.
Submitted [Yes/No]
12 A certificate about satisfactory performance of the equipment duly authenticated by other existing users of the equipment., if applicable.
Submitted [Yes/No/NA]
Note: If valid trade licence constitutes/consists of more than one certificate/page then all the pages are to be enclosed failing which tender is liable to be cancelled.
Yours faithfully,
MEDICAL SUPERINTENDENT Enclosures:
Annexure – I (General Tender Terms & Conditions)
Annexure – II (Special Tender Terms & Conditions)
Annexure – III (Tender Application Form)
Annexure – lV (Specification of Medical Equipments & Instruments )
Annexure – V (Proforma for quoting rates) – Sheet I & Sheet II
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 5 -
Annexure-I
TENDER NO. 40/2016
Tender No. 412.U/16/30/3/Proposal/10-11 (Medical College)/Vol V Dated: 29.09.2016.
GENERAL TERMS AND CONDITIONS
Period for submission of e-Tender form From 06/10/2016 to 08/11/2016 Upto 2 PM
Pre-Bid meeting 06/10/2016 & 25/10/2016 at 2.30 PM
Last Date & Time of submission of e-tender 08/11/2016 upto 2.00 PM
Date & Time of Opening of e-Tender 08/11/2016 at 2.30 PM
Bid Security / Earnest Money to be sent through Post/Delivered
in hand
As mentioned in Annexure IV
Performance security / Security Deposit Money A Sum equivalent to 10 % of the bid value
INSTRUCTIONS
INSTRUCTIONS FOR E-TENDERING All vendors/contractors are required to procure Class-IIIB Digital Signature certificate (DSC) with Both DSC Components i.e. Signing & Encryption to participate in the E-Tenders.
a. Vendor should get Registered at https://esictenders.eproc.in (No charges). However, those vendors who had already registered earlier in the old web portal need not register again.
b. Vendor also needs to submit Bid Processing Fee charges of Rs.2495/- (non-refundable) in the form of Demand Draft from any scheduled bank, in favour of M/s C1 India Pvt. Ltd. Payable at New Delhi for participating in the Tender.
c. Vendor needs to submit the Demand Draft for bid Processing Fee at the under mentioned Registered Address for successful submission of Tender, failing which, the vendor will not be able to participate in the e-tender. Along with the Demand Draft, vendor needs to send a covering letter mentioning about the payment details, company name, address, payment towards ESIC Bid Processing Fees (mention theTender ID and Tender Title) at the under mentioned address, one day before the due date and time of bid submission:
Kind Attn: Mr Mohit Chauhan C1 India Pvt. Ltd., 301, Gulf Petro Chem Building, 1st Floor, Udyog Vihar, Phase – 2, Gurgaon, Haryana – 122015 Note: Payment will be approved only after physical receipt of Demand Draft.
d. The vendor also needs to mention his company name, address, ESIC Bid Processing fees mentioning the Tender ID and Tender Title (at the back side of the Demand Draft of Rs. 2495/-).
e. Vendors also need to send the scanned copies of Demand Draft to [email protected] mentioning their Company Name, Address, Tender ID and Tender Title for approval of Bid Processing Fees at the back side of Demand Draft.
f. The bid can be uploaded upto 2PM on dated 08/11/2016 and any bid upload after the prescribed time shall not be considered irrespective of rates. The bid will be opened on the same dated i.e. on 08/11/2016 at 2.30 PM.
g. The Bidder should carefully read, understand and seek clarifications if any before uploading the bid. No claim whatsoever will be entertained for any alleged ignorance thereof.
ESI-PGIMSR, ESIC MEDICAL COLLEGE & EMPLOYEE’S STATE INSURANCE CORPORATION HOSPITAL & ODC (EZ)
(A Statutory Body Under Ministry of Labour, Govt. of India)
DIAMOND HARBOUR ROAD, P.O.: JOKA, KOLKATA-700 104 An ISO 9001:2008 Certified
Fax: 033 2467 2795, Phone: 033 2467 2799 / 6280 / 1764 Email Id- [email protected]
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 6 -
1. PREPARATION OF TENDER:
The Tenderer shall give full assistance and information as may be required in connection with the contract to the Medical Superintendent or any other officer nominated by him to inspect the premises of the tenderer at all reasonable times.
2. SIGNING OF TENDER:
a) The tender is liable to be rejected if complete information is not given therein or if the particulars and date (if any) asked for in the tender are not duly & fully filled in. Particular attention may be given to the dates of delivery and also to the particulars referred to in the conditions of contract so as to comply with them.
b) Individuals signing tender or other documents connected with the contract must specify: i) Whether signing as a „Sole Proprietor‟ of the firm or his Attorney? ii) Whether signing as a „Registered Active Partner‟ of the firm or his Attorney? iii) Whether signing for the firm „Per Procreation‟?
In the case of companies and firms registered under the Indian Partnership Act, the capacity in which signing e.g. Secretary, Manager, and Partner etc. or their attorney and produce copy of documents, empowering him to do so, if called upon to do so. NOTE: In case of unregistered firms, all the members or all Attorneys duly authorised by all of them or the Manager of the firm should sign the tender and subsequent documents. 3. LATEST HOUR FOR RECEIPT OF THE TENDER: e-Tender shall be submitted within the stipulated date and time. In the event of the stipulated date of opening of the tender being declared a closed holiday for Govt. Offices, the date of opening of the tender (s) will be the next working day. 4. PERIOD FOR WHICH THE OFFER WILL REMAIN OPEN:
i) All tenders should remain valid for acceptance for a period of twelve months from the date of opening of the tender or for such period as stated in Special Terms & Conditions.
ii) The contract / tender, if awarded, shall be valid initially for one year from the date of award of Contract subject to continuous satisfactory performance and on failure on this aspect by the contractor, the Competent Authority will reserve the right to terminate the contract. The period of the contract can be extended for further period at the discretion of the Competent Authority, to a maximum of one year, on terms and conditions of the hospital, while accepting the tender subject to continuous satisfactory performance.
iii) Quotations qualified by such vague and indefinite expressions such as „subject to immediate acceptance‟; „subject to prior sale‟ etc. will not be considered.
5. OPENING OF E- TENDER: The tender shall be opened on the date and time mentioned here in the document. 6. PRICES:
Prices quoted must be meaningful and measurable in the context. Price must be clearly shown in figures and words in Indian Currency. Tenderers should clearly specify whether prices quoted are inclusive of Sales Tax/VAT/duties/statutory charges or such charges as extra. Where no specific mention is made to Sales Tax/VAT/or other duties, prices quoted shall be deemed to be inclusive of such taxes/charges.
7. DELIVERY TERMS
a) The delivery of the stores / execution of work / providing the services etc. are required within a period as specified and as the place mentioned therein.
b) The tenderer shall deliver the stores/ execute the work at the destination / space defined to the consignee / authority in good order (of which the Medical Superintendent, ESIC Hospital & ODC (EZ), Joka, Kolkata shall be
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 7 -
the sole judge) within the limits of the time as deemed reasonable and specify in such quantities/qualities as may be ordered by him from time to time.
c) Time for and date of delivery: The essence of contract: - The time for and the date of delivery of the stores / date of execution of work as stipulated in the schedule shall be deemed to be the essence of contract and delivery / execution must be completed not later than the date(s) specified.
d) The Medical Superintendent may allow additional time under special circumstances such as strikes, lockouts, fire accidents, riots etc.
8. INSPECTION OF STORES /WORK: Supplies shall be accepted/work shall be certified as completed subject to inspection by Medical Superintendent, ESIC Hospital & ODC (EZ), Joka or his assigned representative. Any defect found in the materials / work done will render the supplies/work open to rejection and decision of the Medical Superintendent, ESIC Hospital & ODC (EZ), Joka, shall be final and legally binding. The rejected store shall be returned to the suppliers/work may be executed through others, at the risks and costs of contractor . 9. OTHER TERMS
A. Responsibility for executing Contract: The Contractor/Supplier is to be entirely responsible for the execution of the contract in all respects in accordance with the terms and conditions as specified in the acceptance of tender.
B. The Contractor/Supplier shall not sublet transfer or assign the contract to any part thereof without the written permission of the Medical Superintendent. In the event of the Contractor/Supplier contravening this condition, Medical Superintendent be entitled to place the contract elsewhere on the Contractors/Suppliers account at his risk and the Contractor/Supplier shall be liable for any loss or damage, which the Medical Superintendent, ESIC Hospital & ODC (EZ), Joka, may sustain in consequence or arising out of such replacing of the contract.
c. Earnest Money: The tenderer shall have to deposit earnest money as mentioned in Annexure IV with their tender, failing which the tender is liable to be rejected. The earnest money is to be paid by Demand Draft drawn in favour of ESI Fund A/c No. 1, payable at Kolkata. NO CHEQUES WILL BE ACCEPTED. In the event of the withdrawal / revocation of tenders before the date specified for acceptance, the earnest money shall stands forfeited. In the event of acceptance of the tender the earnest money may be adjusted towards the amount of security required to be deposited by the contractor in terms of Clause mentioned below, the earnest money will however, be returned without interest to the tenderer whose tender is not accepted. Earnest Money demand draft must be sent by Speed Post/delivered in hand so as to reach on and before the closing date and time of the tender to the following address to „The Medical Superintendent‟, ESIC Hospital & O.D.C. (E.Z), Diamond Harbour Road, P.O.: Joka, Kolkata, 700 104, West Bengal‟. At the top of the cover,
the following words should be written in block letters “procurement of Medical Equipments &
Instruments” along with “Tender No. 40 /2016”, failing which the tender is liable to be rejected. d. Security Deposit: On acceptance of the tender, within the period specified by the Medical Superintendent, the
contractor shall deposit as security. deposit 10% of the tender amount The hospital authority shall be entitled to forfeit the Security Deposit or any part thereof without prejudice to any other remedies provided in the contract or available under the law. The security shall be in the form of Demand Drafts payable at Kolkata in favour of ESI Fund A/c. No. 1 or in the form of Bank Guaranteee. a) If the contractor fails in fulfilling above-mentioned terms and conditions, such failure will constitute a breach
of the contract and the Medical Superintendent shall be entitled to make other arrangements at the risk and expense of the contractor.
b) On due performance and completion of the contract in all respects, the Security Deposit will be returned to the contractor without any interest on presentation of an absolute ‘No Demand Certificate’ in the prescribed form and upon return in good condition of any specifications, samples or other property belonging to the purchaser, which may have been issued to the contractor.
e. Recovery of sums due: Whenever any claim for the payment of a sum of money arises out of or under this
contract against the contractor the purchaser shall be entitled to recover of such sum by appropriating, in part or whole the security/earnest money deposited by the contractor, when the balance or the total sum to be recoverable, as the case may be shall be deducted from any sum then due or which at any time thereafter may become due to recoverable under this or any other contract with the purchaser. Should this sum not be
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 8 -
sufficient to cover the full amount recoverable, the contractor shall pay to the purchaser on demand the remaining balance due.
f. Insolvency and breach of contract: The Medical Superintendent may at any time by notice in writing summarily terminate the contract without compensation to the contractor in any of the following events, that is to say:-
i) If the contractor being an individual or if firm, any partner in the contractor’s firm, shall at any time be adjudged insolvent or shall have a receiving order or orders for administration of his estate made against him or shall take any proceedings for liquidation or composition under any insolvency not for the time being in force or shall make any convenience or assignment of his efforts or enter into any arrangements or composition with his creditors or suspend payment of if the firm be dissolved under partnership act, or
ii) If the contractor being a company shall pass a resolution or the court shall make an order for the liquidation of the affairs or a receiver of Manager on behalf of the debenture holder shall be appointed or circumstances shall have arisen which entitled the court or debenture holders to appoint a receiver or Manager.
iii) If the contract commits any breach of this contract not herein specifically proved for: Provided always that such determination shall not prejudice any right of action or remedy which shall have accrued or shall accrue thereafter to the purchaser and provided also that the contractor shall be liable to pay the purchaser for any extra expenditure, he is thereby put to but shall not be entitled to any gain on repurchased.
g. Arbitration: In the event of any dispute or difference arising out of the terms and conditions laid down in this tender, the same shall be referred to Arbitrator appointed by the medical superintendent. The procedure of the Arbitration will be governed by the provisions Arbitration Act 1996.
h. Document: The tenderer should have a valid Trade licence, VAT, PAN / TAN and produce self copies of such certificates along with the tender papers, failing which the tender is liable to be rejected.
i. Statutory requirements: In case the agency appoints manpower / labour in excess of or equal to the number as specified by law, the agency should comply with all statutory enactments including Contract Labour Regulation and Abolition Act, 1970; Minimum Wages Act where applicable; Payment of wages Act, where applicable; ESI Act, 1948, where applicable; EPF Act, 1952, where applicable; etc. All existing statutory liabilities relating to engagement of personnel related to labour laws shall be sole responsibility of the agency. In that case the successful agency will have to obtain a licence from the licensing officer after collecting the requisite certificate in form V from the hospital authority. The successful agency will have to maintain various registers and records, display notices, abstracts of the rules, etc., and issue employment card to the engaged labours. The list of workers employed by the contractor shall be communicated to the authority from time to time.
j. The successful bidder/tenderer shall obtain a valid license under the Contract Labour (R & A) Act, 1970 & Rules framed there under and shall continue to hold it till completion of the contract wherever applicable,
k. Right to accept / reject: The hospital authority reserves the right to reject any or all tender without assigning any reason whatsoever. Also, the hospital authority reserves the right to award any or part or full contract to any successful agency at its discretion and this will be binding on the tendered.
l. Assistance to contractor: The contractor shall not be entitled to assistance either, in the procurement of raw materials required for the fulfilment of the contract or in the securing of transport facilities.
m. The tenderer should have a place of business in and around Kolkata and the complete Postal Address, Telephone / Mobile / Fax / E-mail address, etc. should be provided, while submitting the completed tender form.
n. The list of personal deployed to be intimated to the authority from time to time. The personal employed by the tenderer should have proper uniform for identification.The persons so deployed shall not have any claim for permanent absorption in the hospital and such claim if raised shall be violation of the terms and conditions of the agreement of the hospital authority shall have the right to cancel the agreement to terminate such deployment termination.
o. The contractor will be responsible for such conduct of the persons engaged by him in the hospital, which will be conducive for maintaining as harmonious atmosphere as expected in the hospital and will be responsible for any act & omission of such persons.
p. In the event of any violation of laws, rules, statutory provisions by the contractor, this will amount to breach of contract and in such case, the hospital will have the right for terminating the contract, forthwith, without giving any notice or assigning any reason.
q. Validity of Contract: The contract, if awarded, shall be valid initially for one year from the date of award subject to continuous satisfactory performance. The period of the contract can be extended for further period at the discretion of the Competent Authority, to a maximum of one year, on terms and conditions of the hospital, while accepting the tender subject to continuous satisfactory performance. However, on failure on this aspect by the contractor, the hospital will have the right to terminate the contract forthwith in addition to forfeiting the
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 9 -
security amount deposited by the contractor and initiating administrative actions for black listing, etc. solely at the discretion of the hospital authority. This period of one year can further extended to a maximum of one year at the sole discretion of hospital authority without prejudice to any other right of the hospital authority.
r. The Tenderers will quote the rates in respect of jobs / services described above in various paras and shall fill
Annexure - V appended herewith along with the Tender Application form. s. The successful agency shall have to enter in to an agreement with the Hospital and the cost incurred in this
connection, shall have borne by the contractor. t. The rate once accepted by the hospital shall remain unaltered through the period of contract ,including any
extended period u. Medical Superintendent, ESIC Hospital & ODC (E.Z), Joka, does not pledge himself to accept the lowest or any
tender and reserve to himself the right of accepting the whole or any part of the tender or portion the quantity offered and you shall supply the same /execute the work at the rate quoted by you. You are liberty to tender for the whole or any part.
v. Acceptance by the purchaser shall be communicated in due course. You are requested that the instruction contained in the said communication should be acted upon immediately/as asked for.
w. The hospital authority reserve the right to award any part or full contract to any successful agency (ies) at its discretion and this will be binding on the Tenderers.
x. Failure and Termination: If the contractor fails to deliver the stores or any instalments thereof within the period prescribed for such delivery in the contract or any time liquidation the contract before the expiry of such period, Medical Superintendent may without prejudice to his right to recover damages for breach of the contract, be entitled at his option.
a. To recovery from the contractor as agreed liquidated damages, by way of penalty a sum equivalent to 2% of the price of any stores/services which the contractor has failed to deliver within the period fixed for delivery for the schedule for each month or part of the month during which the delivery of such stores may be in arrears, where delivery thereof is accepted after expiry of the aforesaid period, or
b. To purchase elsewhere, without notice to the contractor, on his account and at the risk of the contractor, the stores/services not delivered or store/services of similar description (where stores/services exactly complying with the particulars are not in the opinion of the Medical Superintendent, ESIC Hospital & ODC (E.Z), Joka, readily procurable such opinion being final). Without cancelling the delivery in respect of the consignments not yet due for delivery or
c. To cancel the contract or a portion thereof, and if so decided to purchase or authorise to purchase of store/services not so delivered or other of a similar description (where store/services exactly complying with the particulars are not, in the opinion of the Medical Superintendent readily procurable, such opinion being final) at the risk and cost of the contractor.
MEDICAL SUPERINTENDENT
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 10 -
Annexure-II
TENDER NO. 40/2016
Tender No. 412.U/16/30/3/Proposal/10-11 (Medical College)/Vol V Dated: 29.09.2016.
SPECIAL TERMS AND CONDITIONS
The following special terms and conditions shall apply for RE-E-Tender for Procurement of Medical Equipments & Instruments (Two Bid). A.
1.0. The Tenderers should have a place of business in and around Kolkata and the complete Postal Address, telephone / Mobile / Fax / E-mail address, etc. while submitting the completed tender form.
2.0. The agency while submitting their tender form shall enclose Photostat copies of trade licence essential for carrying out the activities under reference, Sales tax / VAT, PAN and any such other documents specified hereto. Tender form incomplete in any respect and not supported with Earnest Money and the above-mentioned requisite documents, will be summarily rejected by the hospital.
3.0. The Competent Authority reserves the right to reject any or all tenders without assigning any reason whatsoever.
B.INSPECTION / INSTALLATION OF ITEMS / EQUIPMENTS: Supplies shall be accepted and work shall be certified as completed subject to satisfactory and complete
installation (upto full potentials claimed for that respective equipment/ Item) of the equipment / items supplied including supply of all accessories, and certified by the assigned officer, and subsequent inspection by Medical Superintendent, ESIC Hospital & ODC (EZ), Joka, or his assigned representative. Any defect found in the materials / equipment / items supplied / work done will render the supplies / work open to rejection and decision of the Medical Superintendent, ESIC Hospital & ODC (EZ), Joka, shall be final and legally binding. The tenderers shall have to take the same (rejected store) back at their own cost and risk, and shall replace such rejections with the items of standard specifications / quality as acceptable to the Hospital Authority. Alternatively, the stores may be purchased from others / work may be executed through others, at the risks and costs of the tenderer, at the discretion of the authority. C. WARRANTY / GUARANTEE: Along with the Technical Bid the following information are to be provided exclusively. (i) All the equipments shall be carrying at least 2 (two) years warranty / guarantee against
defects of manufacturer/workmanship and poor quality of components. Accordingly, the tenderers shall indicate clearly and exhaustively the mandatory warranty / guarantee offered by them / by the manufacturing / supplying firms, its duration, as well as the various Terms & Conditions involved therein, at the time of submission of the Technical Bid papers.
(ii) The tenderer must be able to provide CMC for the equipments quoted at least for a period of five years beyond normal warranty period of 02 years [except item Sl.NO. 1 of department of
anaesthesiology where warranty is mentioned in the respective specification]. A declaration to such effect must be accompanied with the offer, in the technical bid.
(iii) Uptime guarantee: During the warranty/guarantee / CMC period the firm will maintain the
equipment in good working condition. All the complaints will be attended by the firm within 24 hours
ESI-PGIMSR, ESIC MEDICAL COLLEGE & EMPLOYEE’S STATE INSURANCE CORPORATION HOSPITAL & ODC(EZ)
(A Statutory Body Under Ministry of Labour, Govt. of India) DIAMOND HARBOUR ROAD, P.O.: JOKA, KOLKATA-700 104
An ISO 9001:2008 Certified Fax: 033 2467 2795, Phone: 033 2467 2799 / 6280 / 1764
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 11 -
of the dispatch of a complaint to their office. The firm shall ensure that machine is set right within 10 days (Ten Days) of the intimation. However, the tenderer have to arrange similar equipment as a standby at his cost and risk in case of breakdown. In case of the machine not being made functional within 10 days (Ten Days), Stiff Penalty equivalent to 2% of the cost of machine per week shall be levied for every week of delay at the discretion of the authority. In addition, the tenderer have to arrange similar equipment as a standby as stated above.
(iv) A certificate about satisfactory performance of the equipment duly authenticated by other existing users of the equipment has to be supplied.
D. Expected life of equipment certificate.
E. The Certificate that the quoted equipment have not been and are not being supplied to any other organization at a rate lower than being quoted here. F. A certificate about satisfactory performance of the equipment duly authenticated by other existing users of the equipment, if applicable. G. SOFT WARE UPGRADATION:
Free up-gradation of software (all update & upgrades) at least for 5 years is to be provided wherever applicable.
H. CERTIFICATES TO BE SUBMITTED ALONGWITH THE TECHNICAL BID: The following written guarantee / declaration must be provided exclusively without which the quotation shall be liable for rejection.
1. The name, addresses, phone no, fax no, etc, of the authorised service centre in and around Kolkata for each of the specific equipment / Article / item quoted.
2. A certificate about satisfactory performance of the equipment duly authenticated by other existing users of the equipment has to be supplied.
3. A declaration that the CMC (including all spares & labours) shall be made available at least for five years beyond normal warranty period of 02 years [except item Sl.NO. 1 of department of
anaesthesiology where warranty is mentioned in the respective specification] for each of the specific equipment / Article quoted.
4. A declaration indicating willingness to provide CMC services at least for five years after the expiry of the warranty period of 02 years [except item Sl.NO. 1 of department of anaesthesiology
where warranty is mentioned in the respective specification] for each of the specific equipment quoted. Accordingly, the tenderer must quote prices for CMC, separately, for each year, for 5 years. The quotation for the cost of such CMC are to be furnished along with cost of the equipment in the Price Bid. No such rate shall be mentioned in Technical Bid.
5. A declaration that the specific equipment/article with the given specifications has not been sold / supplied to any other organisation at a lesser price than the price quoted here for each of the specific equipment quoted here.
I. SAMPLES / DEMONSTRATION The firms should be prepared to demonstrate their item(s) / arrange for demonstration of items
within 3 (Three) weeks from the date of opening of tender for verification / inspection, etc., or at a later date as decided by the competent authority. The firm shall have to comply with such conditions failing which the tenderer shall be liable for rejection and forfeiture of the Earnest Money. The tenderer / firm / company shall arrange for demonstration of equipment / Item / article at his own cost and risk. Tenderer who fails to demonstrate the equipments/ instruments quoted will not be considered for selection. Wherever applicable / whenever asked, the firms shall have to submit samples of item(s) for verification /
inspection, approval, etc., if required and the firm shall have to comply with such conditions. It is,
therefore, in the own interest of the firm(s) concerned to get their proofs / samples, etc verified / inspected
before effecting supply at their own cost. Samples supplied should not be less than the quantity necessary
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 12 -
for the test given in the specifications (if any) or in the schedule to tender. Each sample should have a card
affixed to the sample which should bear the following information:
i. Your Name and address ii. Tender Number iii. Date of opening of tender iv. Item no. against which tendered v. Any other relevant description deemed fit.
Samples shall not be returned normally (until specifically asked for within one month of opening of tender in case of Implants, Equipments, Furniture and Instruments only, where the same shall be collected back from the hospital at the cost and risk of the Tenderers) and shall be the property of the ESIC.
J. DETAILS OF ITEMS QUOTED: It is mandatory to indicate the full name, make / brand, model number, and details specification of the equipments quoted by them, (in addition, a brochure of product information may be attached along with). Tenderers also have to indicate clearly the Name, Address and all Contact numbers of the MANUFACTURING FIRM and the firm responsible for providing CMC, of the equipment quoted by them.
K. Within the warranty period, substitute working equipment of same model and make must be temporarily provided by the supplier free of cost to cover for any downtime exceeding 48 hours.
L. Onsite (in the hospital premises) Physical demonstration of the quoted model is preferable. However in difficulties demonstration is allowed only within the Kolkata city limit.
M. Cost of all accessories & consumables, not covered under CMC shall (per unit) also be quoted separately in the separate sheet II in price bid.
N. Free calibration certificate for the Medical Equipments for 07 years.
O. BUY BACK OFER {wherever specified in the Schedules / Specifications (Annexure –V)}:
Preference will be given to the bidder who offers for buy back of the condemned equipments. The rate for buy back offer of the condemned equipments is to be mentioned in the Price Bid. No such rate shall be mentioned in technical bid. The equipments which are offered for buy back may be inspected by the tenderers on any working day from 11 AM to 3PM.during the period of supply of blank tender form as mentioned in the tender notice(at the time of issue of Tender Documents). P.Tender selection will be made on the basis of rate quoted in Annexure- V by the technically suitable/qualified bidder.
Q.The payment to the contractor will be made mandatorily by electronic mode such as RTGS/NEFT etc. The contractor is instructed to supply the following information along with the tender.
(i) Name of the Bank (ii) Name of the branch (iii) Account Number (iv) IFSC Code (v) MICR Number
MEDICAL SUPERINTENDENT
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 13 -
Annexure - III TENDER APPLICATION FORM
1 Name of the firm:-
2
a Full Postal Address:-
a Cell Phone No.
b Telephone No:-
c Fax No.
E Email Id:
3 Name and Address of your Bankers stating the name in which the Account stands:-
a) Name of Bank
b) Name of Branch
c) A/c. No.
d) IFSC Code
e) MICR Number
4 Are you in the list of approved contractors of any other organisations / institutions, if any give details:-
5 Give details of any Government contracts executed during the last twelve months:-
6 Any other information which you consider necessary to furnish:
UNDERTAKING a) I, the undersigned certify that I have gone through the terms and condition mentioned in the tender
document and undertake to comply with them. b) The rates quoted by me are valid and binding upon me for the entire period of contract and it is certified
that the rates quoted and the lowest quoted for any other institution/hospital in India. c) The Earnest Money of Rs.___________ to be deposited by me has been enclosed herewith vide
Demand Draft No.________________ dated ______________ drawn on bank _____________________________ Branch _________________.
d) I/We give the rights to Medical Superintendent to forfeit the Earnest Money/Security money deposit by me/us if any delay occur on my/agent's part or fail to supply the articles within the appointed firms of desired quality.
e) There is no vigilance/CBI case or court case pending against the firm. f) I hereby undertake to supply the items as per directions given in the tender document/supply order
within stipulated period. g) Whether signing as - (please refer to point 02 of annexure -1) Date:- Signature of the Tenderer:- Place:- Full Name:-
Designation:- (Office seal of the tenderer)
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 14 -
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 15 -
(For Technical Bid Only)
The amount of Earnest Money / Bid Security to be deposited for each of the item quoted is mentioned against each serialised item below. The total amount of Earnest Money for all the quoted items may be drawn in a single demand draft. However, in such case, the detail break up of earnest money submitted for each item is to be furnished in a plain paper along with the bank draft.
ANNEXURE – IV
SL. NO.
NAME OF EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
REQUIREMENTS /QTY(FOR ESI-PGIMSR, JOKA)
EMD VALUE
QUOTED
(YES/NO)
DEPARTMENT OF ANESTHESIOLOGY ESIC-PGIMSR & MC & ESICH & ODC (EZ) JOKA 1 Anesthesia
Workstation (with
multiparameter patient
monitor)
1.Three gas (O2, N2O, Air) Anesthesia Gas Delivery Unit with the the following sub specifications:
a) The unit should have primary connection for central medical gas supply for O2, N2O and Air.
b) Provision for back up emergency supply through pin indexed O2 and N2O small cylinders.
c) Electronically controlled gas mixing and delivery system.
d) In case of O2 failure, the machine should automatically switch over to Air.
e) Audio visual alarm for O2 failure.
03 pcs 90000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 16 -
f) Accurate control of minimum 25% O2 in fresh gas (through sensitive oxygen ratio controller) up to flow of > 1 L/min, in presence of N2O. At least 250 mL/min of O2 for low flow and minimal flow applications (fresh gas flow < 1 L/min).
g) Should be capable of accurate fresh gas delivery of up to 500 mL/min for minimal flow applications.
h) Ergonomically located integrated emergency O2 flush with self returning valve.
i) Should have single user-interface of at least 30 cm color display and electronic fresh gas doing for adult, child and neonate modes. The same user-interface should control and display all parameters including control of ventilator modes, display of pipeline and cylinder pressures, FiO2, ETCO2, airway pressures, tidal volume, minute ventilation, fresh gas flow, etc.
j) The user-interface should have configurable screen layouts for individual screen setups.
k) The machine should have fully automatic menu driven self test and user check list. In case of emergency
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 17 -
machine startup, it should be possible to bypass the self test completely.
l) The system leak test should be done through the Y-piece of the circle system and should not require user interaction during the test.
m) O2 safety flow adjustable from 0 – 12 L/min, through the vaporizer for emergency back up use.
n) Machine should also have an independent fresh gas outlet for connection to external circuit (Bain's circuit and Magill's circuit).
o) The machine should have a configurable nitrous-oxide-free operation (in case of necessity).
p) Fresh gas flow setting 50 mL/min to 12 L/min.
q) It should have the indicator to show the efficiency of fresh gas setting while used in low flow and minimal flow.
r) In the event of complete loss of external electric power and internal battery failure, it should be possible to manually ventilate the patient at 100% O2 and deliver anesthetic agent.
s) Major and critical components to be
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 18 -
made of corrosion proof and durable metal alloy.
2.Integrated Anaesthesia Ventilator:
a) Electronically controlled, electrically driven ventilator should not require any driving gas or pneumatic power for its operation.
b) Ventilator should be suitable to ventilate adult, child and neonate without changing ventilator bellows.
c) Ventilator should have fully automatic calculations and preset of patient specific ventilation settings based on ideal body weight of the patient.
d) Automatic breathing circuit compliance correction. Bellow should be enough light weight as not to offer any constant PEEP.
e) Modes of ventilation: Spontaneous ventilation, Manual ventilation, IPPV with plateau adjustment from 0 – 60 % of inspiratory time, PLV (pressure limited ventilation) with decelerating flow, Pressure controlled ventilation, SIMV-VCV, SIMV-PCV, Pressure Support (PS), PS with CPAP, PS with SIMV
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 19 -
(CMV/PCV).
f) Should be upgradeable to Volume assured mode - autoflow – delivering set tidal volume at minimum airway pressure.
g) Peak inspiratory flow up to 150 LPM.
h) Tidal volume adjustments from 20 mL to 1400 mL (upgradeable to minimum 5 mL).
i) PEEP from 0 – 20 mbar, electronically adjustable.
j) Respiratory frequency 3 – 100 /min.
k) I:E ratio: 5:1 to I:99
l) Should have the capability to ventilate with atmospheric O2, in case of O2 and power failure.
3.Circle breathing system, Circle absorber:
a) Compact circle breathing system suitable for standard, low flow and minimal flow with minimum patient circuit volume including circle absorber (approx. 3 L, excluding reservoir bag) for fast response to change in fresh gas compensation.
b) Fresh gas decoupled /
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 20 -
compensated breathing system for adult and children.
c) Integrated warmer in circle absorber for breathing gas conditioning and prevention of water condensation inside the circle system.
d) Breathing gas inlet and outlet of the circle system should be fitted with reusable (autoclavable) bacterial-viral filter.
e) Should have facility of gas sampling from the breathing system.
f) Manual APL on circle system valve with direct setting of release pressure.
g) Easy to fit and change circle absorber canister of about 1.5 L capacity.
4. Vaporizers: a) Temperature and pressure
compensated and flow interdependent vaporizer for Sevoflurane (1 such) and Isoflurane (1 such).
b) Vaporizer should have extended delivery range from 0 – 6%.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 21 -
c) Vaporizers must have selective interlocking safety mechanism to prevent simultaneous operation of two vaporizers.
d) Should have transport lock and provide hermetic sealing of agent chamber during transport and storage.
e) The vaporizer should require no calibration in its life cycle.
5. Safety features and alarms: a) The machine should have
adjustable alarm limits for all the parameters with auto set alarm function.
b) The machine should have automatic display of MAC/MACx values and automatic activation of low agent alarm
c) Airway pressure low limit should automatically change with PEEP setting changes.
d) Continuous monitoring and display of tidal volume, airway pressure, ETCO2, FiO2 (paramagnetic O2 sensor), anesthetic agent concentration (with automatic identification of anesthetic agent),
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 22 -
lung compliance (VCV modes).
e) Graphic display of curves and loops with fast analysis of change in lung mechanics provided by simultaneous display of reference and real time loops.
f) Bar graph display of tidal volume (inspiratory and expiratory volume).
g) Trending for alarms and measured values with graphic trend display.
h) The machine should calculate agent compensation and agent uptake by patient on a case to case basis and display total fresh gas consumption in the electronic logbook of the machine.
6. Accessories to be provided: a) Should have at least 3 pc of RS232
connectivity port to communicate with patient monitor or HIS for automatic data transfer.
b) Pin indexed yokes for O2 and N2O (one each)
c) The machine should have externally-fitted water and moisture trapping chamber (large capacity) fitted to the medical air pipeline
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 23 -
inlet.
d) Trolley with drawer.
e) Floor mounting with durable caster wheels with brake.
f) Writing surface.
g) Color coded and DISS coded pipeline connections and hoses for O2, N2O and Air.
h) Adult and Child breathing circuits (autoclavable).
i) Anesthetic face masks (silicone, latex free).
j) Water traps and sampling lines for gas analyzer.
k) Semi closed breathing system for adult and child (latex free).
l) Cylinder key (2 such) chained to the machine, near the cylinder yokes.
m) User manual.
7.Quality standard of the equipment, warranty and after sales service:
a) All the components of the of workstation (anesthesia gas delivery unit, vaporizer, ventilator, circle absorber and circle system), should be
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 24 -
manufactured by the same agency to maintain uniformity of parts and efficient after sales service.
b) Authorization for standing by, terms of warranty & AMC & supply of spares for 7 years.
c) Physical demonstration of the quoted model is mandatory.
d) Must have CE certification (EN 60601-2-13) w.r.t the essential requirement for safety and performance of the anesthesia workstation.
e) The comprehensive warranty will be 5 years (including all spares and labor) from the date of satisfactory installation of equipment. Also quote rates for comprehensive CMC (including all spares and labor) for 6th to 10th year, after expiry of warranty period. Cost of spares, accessories and consumables should also be quoted separately.
f) Within the warranty period, substitute working equipment of same model and make must be temporarily provided by the supplier free of cost to cover for any downtime exceeding consecutive 48 hours.
g) Facility for good after sale & service with trained engineers posted in
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 25 -
Kolkata.
Multi-parameter patient monitor (integrated with the anesthesia workstation) with the following technical specifications are required.
1.Parameters: a) Should be suitable for monitoring
adult, child and neonatal patients under anesthesia.
b) Should have minimum of ECG, SpO2, NIBP, 2 IBP, 2 Temperature as inbuilt standard parameters. All other parameters should be by upgrades as pods or modules and software.
c) ECG: Five lead ECG monitoring with simultaneous display of three leads of ECG wave forms. Simultaneous display of twelve lead ECG waveform should be possible.
d) Respiration: Through impedance pneumography from ECG.
e) SpO2: Should have digital display, plethysmography, and tone modulation with change of
f) SpO2. Should be supplied with Masimo SET technology with compatible sensors for Adult, Child
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 26 -
and Neonate.
g) NIBP: Oscillometric method of NIBP measurement with stepwise deflation. Adult, child, neonate preset modes. Compatible NIBP cuffs for Large adult, Adult, Child and Neonate. Should display systolic, diastolic, mean pressure in large, easy to read display. Measurement modes: automatic, manual and stat. Automatic mode adjustable intervals from 2 minute – 240 minutes and adjustable alarms.
h) IBP: Simultaneous monitoring of 2 IBP. Range – 50 to 400 mmHg.
i) Temperature: Simultaneous monitoring of two temperature: core and skin temperature.
j) Simultaneous monitoring of two IBP and one temperature should be possible.
a)User Interface:
a) Should be suitable for adult, child and neonatal monitoring.
b) Should have non-volatile memory for graphic and tabular trending of all monitored parameters as
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 27 -
standard.
c) Should have event recall for minimum of 50 events, graphical and tabular trends, drug dose calculations, alarm logs, OxyCRG, oxygenation-ventilation and hemodynamic calculations as standard.
d) Should have arrhythmia detection including life threatening arrhythmias such as ventricular tachycardia, ventricular fibrillation, asystole, as standard feature.
e) Should have manual and automatic setting of screen format.
f) Should have user selectable parameter priority and color selection for parameter on screen.
g) Should have excellent cable management with as minimum as possible cables at monitor and patient end for maximum user friendliness.
h) Should have facility for both wired and wireless networking.
i) Should have minimum eight channels of waveforms with
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 28 -
minimum 8 inch display.
j) Cursor tool for vertical and horizontal cursors.
k) Should have web browsing facility to review each networked monitor through hospital LAN via PC in hospital LAN from remote location should be possible as future upgrade.
b)Optional upgrades/ modules (to be
quoted separately):
a) Neuromuscular monitoring module for monitoring neuromuscular blockade.
b) Bispectral index module for monitoring depth of anesthesia.
c)Safety features:
a) Internal battery backup for minimum of 3 hours (Li-ion battery) to be provided.
b) CE and US FDA certification for the monitor as well as the individual parameter modules w.r.t the essential requirement for safety and performance of the monitor and accessories.
c) Should have defibrillator and ESU
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 29 -
protection, ECG Synchronization, IABP interface (ECG and Arterial for triggering and deflation with a device delay of < 20 milliseconds.
d)Accessories:
a) 5/12 lead ECG cable.
b) SpO2 Masimo set finger sensor with extension cable for adult, child and neonate.
c) Temperature probes (2 pc).
d) NIBP Hose.
e) NIBP cuffs (large adult, adult, child, neonate).
f) IBP reusable cable for 2 IBP and 10 pc disposable transducers.
g) BIS module and DSC cable..
h) NMT module and cable with acceleromyograph..
i) User manual.
e)Warranty and after-sales service:
a) All the components of multi-parameter patient monitor should be manufactured by the same agency to maintain uniformity of parts and
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 30 -
efficient after sales service.
b) Authorization for standing by, terms of warranty & AMC & supply of spares for 7 years.
c) Physical demonstration of the quoted model is mandatory.
d) The comprehensive warranty will be 5 years (including all spares and labor) from the date of satisfactory installation of equipment. Also quote rates for comprehensive CMC (including all spares and labor) for 6th to 10th year, after expiry of warranty period. Cost of spares, accessories and consumables should also be quoted separately.
e) Within the warranty period, substitute working equipment of same model and make must be temporarily provided by the supplier free of cost to cover for any downtime exceeding consecutive 48 hours.
f) Facility for good after sale & service with trained engineers posted in Kolkata.
2 Multi functional Surgical OT table ( C-arm fluoroscope
Multi functional Surgical OT table ( C-arm fluoroscope compatible ) with electronic control with the following specifications :
Should be a mobile universal operating
03 pcs 100000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 31 -
compatible ) with electronic control
table with Direct motor driven adjustment of height, lateral tilt, Trendelenburg/anti-Trendelenburg.
It should be 100% oil free. Should have a longitudinal adjustment of
250 mm. Should have pneumatic spring support for
leg section and back section. Adjustment of the column functions should
be electrically Motorised via cable remote control
Should have additional operating panel with status indicators for tabletop orientation on column.
Should have built-in electronic interface to allow remote diagnosis and software updates via modem.
Should have maintenance-free battery, integrated in the column, which can be charged via a separate charging cable that also serves for direct mains operations if needed.
Basic tabletop should consists of seat section and back section that can be adapted and extended to meet the requirements of all the surgical disciplines by combining it with other tabletop components.
The system should have Electrical and functional safety with Microprocessor and Sensor Technology Module.
Completely X-ray translucent tabletop. Pads should be integrally foamed,
electrically conductive, soft and detachable, Velcro-free system for optimum hygiene and durability.
Should have stable running gear with 4 large double castors with a minimum diameter of 150 mm for easy manoeuvring.
Should have foot switch for brake.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 32 -
Should have H – shaped base providing a plenty of space for the surgical team's feet.
Tabletop frame, column cladding, side rails and running gear frame should be made from disinfectant-resistant, easy to clean stainless steel.
It should be operated manually without the remote.
Column drive Height adjustment (without pads) Trendelenburg/Anti-Trenelenburg Tilt Pneumatic spring-assisted leg section up/down Standard leg section up/down° Back section up/down Longitudinal slide Patient weight
Electro-mechanical motor 700 mm – 1.120 mm 30°/35º +-25° +20°/-90° +-90° +85°/-30° 250 mm More than 225 Kg
The systems should be quoted with following General accessories :
1. Arm positioning support with radiolucent upper arm pad and roll- 2 nos.
2. Shoulder support-1 pair. 3. Anaesthesia Screen-1 nos. 4. Suspended arm strap set-2 nos 5. Infusion pole with 4 hooks-1 nos. 6. Body strap with locking Clamps-2 nos. 7. Lateral support height adjustable-2 nos. 8. Clamps-4 no. 9. Semi-circular pad-1 nos.
The systems should be quoted with following Orthopaedic accessories :
1. Knee Arthroscopy adapter 2. Radial clamp
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 33 -
3. Leg holder 4. Side rail extension & adapter
5. The table should be USFDA, & CE and UL certified
6. It should be meeting international standards for medical and electrical safety standards;
3 Cardiac
Biomarker
Analyzer (Card-
based
Quantitative
Assay):
Technical Specifications of Cardiac Biomarker Analyzer (Card-based Quantitative Assay):
a) The card-based portable Cardiac
Biomarker Analyzer should be able to
quantitatively measure the following
parameters: Troponin I, BNP, CK-MB,
Myoglobin, D-Dimer, using
Fluorescence Immunoassay
Technology.
b) The analyzer must be small in
dimension and portable system.
c) The analyzer must be easy to operate,
intuitive user interface, requiring
minimum technical training of the
operator.
d) The unit should operate on AC adapter
and also on inbuilt Li-ion battery
backup.
02 pcs 20000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 34 -
e) The sample requirement must be less
than 300 micro liters for a given panel
of test.
f) The single-use test card should be self
contained with all the reagents, sensors
& calibrating solutions required for the
test.
g) The system should have inbuilt
memory capacity of at least 500 test
results with date and time.
h) Operating temperature range between
18 and 30 degree Celsius.
i) The system should be provided with an
in-built thermal printer.
j) The system should be able to interface
with HIS and LIS software.
k) Should have built in QC check facility
for the instrument.
l) Should be able to perform all the
quantitative tests of a single sample in
less than 20 minutes.
m) Should be US FDA certified and CE
marked for all the main equipment as
well as the accessories and kits used.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 35 -
4 The
Endoscope Drying Cabinet
The Endoscope Drying Cabinet should have the following technical specifications:
1. Approximate dimensions: Width X Depth x Height = 1280 mm x 470 mm x 2150 mm.
2. Approximate depth of chamber = 370 mm; approximate volume of chamber 0.6 cubic meters.
3. Number of endoscope positions: at least 6 (six).
4. Drying time = 120 minutes or less. 5. Storage time = 160 hours or more. 6. Power supply: 230V x 0.9 A, 50 Hz,
AC. 7. Power consumption should be less
than 150 watts. 8. Air supply: compressed air
pressurized medical grade dry air, internal pressure 3 – 8 bar, dew point = - 43 degree C.
9. Internal ventilator 30 cubic meter/h (approximately).
10. Hepa filter (filter class minimum 7) with 0.3micrometer/9997 DOP; HEPA filter resistance = 200 Pa
11. Cabinet doors must be lockable, with user access control to prevent unauthorized access.
02 pcs 5000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 36 -
5 ELECTRO SURGICAL
UNIT
TECHNICAL SPECIFICATION FOR ELECTRO SURGICAL UNIT
The Micro-processor based isolated Electro Surgical Unit should be compatible with Argon Coagulator system, designed for all kind of General Surgeries with both monopolarand bipolar modes. The following features are required 1. The unit should be entirely
microprocessor based. 2. Machine should have LED displays. 3. “Highest power efficiency rating” - have
to be within the range more than 97 %. 4. Real time tissue impedance monitoring
technology to deliver the selected power perfectly into a wide range of tissue types reducing thermal spread, RF interference and Neuro muscular stimulation and spark using feedback technology of sensing tissue types at a rate as high as 200 times in a second.
5. Return Electrode Contact Quality Monitoring (REM) system with Adaptive REM facility.
6. The Machine should work with disposable dual plate patient's return electrode with good quality of polyhesive adhesive get.
7. Patients' return electrode should be available in three sizes, for adults, paediatric and neonatals.
8. The patient return electrode should be all disposable type.
03 pcs 5000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 37 -
9. The service provider of the unit should have their working office/workshop in Kolkata.
10. Facilitating two surgeons at a time using one machine in the same surgery.
11. Numerical Error alarming system should be inbuilt.
12. With a single button on the machine, previous power setting can be recalled.
13. Should be type CF Equipment (IEC 601 – 1 & IEC 601-2-2) defibrillator proof.
14. Unit should be US FDA and CE certified 15. Facilitating under water procedures 16. Unit should have “Spray” mode with
Highest Crest Factor (in the range of 7-9) - (*Crest Factor as an indicator of a waveform's ability to coagulate bleeders without cutting effect.)
17. There should be option of changing the crest factor from low to high value with a single button.
18. There should be sufficient Coag modes present for all applications ( Preferably 4 coag modes)
19. Must be compatible with smoke Evacuator system, Argon Plasma Coagulator system and CUSA
Input power source; Operating Range : 170-260 VAC Line Frequency : 50-60 Hz Minimum High Frequency Leakage Bipolar Less than 60 mA Monopolar Less than 150
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 38 -
mA OUTPUT CHARACTERISTICS Highest Powers should be in the below ranges
Precise – 70 Watts Standard – 70 Watts Macro – 70 Watts
Low – 300 Watts Pure – 300 Watts Blend – 200 Watts
Deisccate – 120 Flug. High Crest Factor – 120 Flug, Low Crest Factor-120 Spray - 120
OUTPUT WAVEFORMS :-
BIPOLAR: 470 Khz sinusoid
Monopolar Cutting Pure: 393 kHz sinusoid Blend: 393 kHz bursts of sinusoid recurring of 27 Khz intervals. 50% duty cycle envelope
Monopolar Coagulation: Dessication:- Low 1: 240 +-40 Khz sinusoid recurring at 39 Khz. 8% duty cycle Low 2: 393 kHz sinusoid Low 3: 393 kHz sinusoid Fulguration:- High 1: 470+-40KHz damped sinusoidal burstswith a repetition frequency of 57 Khz
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 39 -
High 2: 470+-40KHz damped sinusoidal burstswith a repetition frequency of 30 Khz Spray:- 390 Khz damped sinusoidal bursts with a randomised repetition centered at 28 kHz. Frequency include 21 Khz ‹ f ‹ 35 KHz Output Is further modulated by a random 250 Hz envelope with a variable duty cycle Output power changes by ‹ 15% or 5 Watts, which ever is greater, as the line voltage varies from 90 – 135 volts and 186 – 264 volts (into a 300 ohm load)
6 Forced air warmer
Specifications for Forced air warmer 1. Forced air warmer for patient
warming with adjustable automatic temperature control between 32 - 44 degree Celsius, in steps of 4 degree Celsius; with outlet hose temperature monitoring system. The warmer unit should have the system of securely mounting on any IV pole or bed rail. Non-tipping mounting pole, with caster wheels, and wire basket to be provided with each warmer unit.
03 pcs 4000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 40 -
7 Forced-air
(convective)
patient-warming
system
Forced-air (convective) patient-warming system Technical Specifications:
a) Servo-controlled forced–air (convective) patient
warming system, using thermistors placed at hose end.
b) Hose end temperature range must be
adjustable from 36°C to 44°C by 4°C
increments (±1°C).
c) Relative Average Noise Level at 1000 Hz (front
and back) must be less than 45 dBA. d) Air Flow: 55 to 86 cubic feet/min.
e) Must have air filtration system with 0.2 micron
filters.
f) Operating voltage 230V, 50Hz AC.
g) The components and accessories of the convective patient warmer must conform to the
following Quality Standards: Product Safety (EN
60601-1, UL 2601-1); Convective Warming
Blanket Flammability (NFPA 702, 16 CFR
1610); EMC (EN 60601-1-2, FCC 47 CFR Part
15, Class B); Enclosure Protection (IEC 60529 IP Code: IPX1); Convective Warmers (ASTM
F2196-02); Drop Test Compliance (EN 60601-
1), and must have the US-FDA 510(k)
certification.
5 (five)
11000.00
8 Portable USG
equipment for vascular imaging
and regional
anesthesia
Portable USG equipment for vascular imaging and
regional anesthesia Technical Specifications:
a) Portable ultrasound machine with multi-frequency
broadband linear array, curved array and sector array
transducers used for accurate localization of peripheral
nerves, nerve plexuses, and epidural space during
regional anesthesia and also localization of peripheral and central veins and arteries for vascular access.
b) Must have US FDA 510(k) certification for the main
equipment and accessories.
c) Must have the following Internationally approved
safety features & components: Electromechanical safety standards: EN 60601-1:1997;
EN 60601-1-1:2001; EN 60601-2-37:2001 +
Amendment A1:2005; CAN/CSA C22.2, No. 601.1-
M90; CEI/IEC 61157:1992; UL 60601-1
1 (one)
32000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 41 -
EMC Standards: EN 60601-1-2:2007; CISPR11:2004
DICOM standard: NEMA PS 3.15:2000-Part 15
9 Ambulatory PCA
pump
Ambulatory PCA pump Technical Specifications: a) Ambulatory microprocessor controlled
programmable patient controlled analgesia (PCA)
pump.
b) Must have the following CE approved safety
features & components: IEC/EN 60601-1, Class IIIb
(according to Directive 93/42 EEC; EMC: IEC/EN 60601-1-2/ 60601-2-24.
c) Must have US FDA 510(k) certification for the main
equipment and accessories.
10 (ten)
26000.00
10 Syringe infusion
pump
Syringe infusion pump Technical Specifications:
a) Syringe infusion pump for continuous precise delivery of intravenous drug infusions.
b) Must have the following CE approved safety
features & components: IEC/EN 60601-1, Class IIIb
(according to Directive 93/42 EEC; EMC: IEC/EN
60601-1-2/ 60601-2-24.
12 (twelve)
12000.00
11 Volumetric
(piston) infusion pump
Volumetric (piston) infusion pump Technical Specifications: a) Volumetric infusion pump (piston mechanism) for
continuous accurate fluid infusions, with ultrasonic,
adjustable air bubble sensor.
b) Must have inbuilt re-chargable Li-ion battery of at
least 1600 mA. c) Must have the following CE approved safety features
& components: ISO 9001:2000 AND ISO 13485:2003
(in accordance with the Medical Devices Directive
93/42/EEC; Design Standard: EN 60601-1 (safety)
and IEC 601-1-2 (EMC); Electrical Safety Stabdards:
EN 60601-1, IEC 60601-2-24, IEC 60601-1-4.
4 (Four)
12800.00
12 Single chamber
temporary cardiac
pacemaker (VVI,
VOO, AAI, and AOO
modes)
Single chamber temporary cardiac pacemaker (VVI,
VOO, AAI, and AOO modes) Technical Specifications:
a) Single chamber temporary cardiac pacemaker
with VVI, VOO, AAI, and AOO modes.
b) VVI (AAI) modes must be selectable with and without acoustic signal.
c) Pacing Rate: 30 to 180 ppm
2 (two)
3600.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 42 -
d) Atrial Overdrive Pacing (RAP): 2X (60 to 360
ppm); 4X (120 to 720 ppm)
e) Output Amplitude: 0.3 to 12 V ± 5%
f) Pulse Width: 0.75 ms ± 0.02 ms g) Sensitivity: 1 to 20 mV, Asynchronous.
h) Refractory period: 250 ms
i) Battery Type: Should accept Standard 9 V,
Alkaline or Lithium batteries. Should have
economically long battery lifetime of up to 30
days of operation with a single 9 V Alkaline battery.
j) Weight must be less than 200g (with battery)
k) Connector Compatibility: Must accept standard
connector pins with diameters ranging from 0.9
to 2.0 mm. Must accept all standard myocardial heart wires and temporary pacing leads for
direct connection or through temporary
extension cable.
l) Protective cover must be present to safeguard
against accidental changes to settings.
m) Audible warning tone for low battery, including low battery indicator must be present.
n) Pacing run-away protection feature must be
present.
o) Arm Strap must be supplied.
p) The equipment must conform to ISO and CE stands for safety of operation and quality.
13 Pressure Infuser
Bag (Reusable): 1
L & 0.5 L sizes
Pressure Infuser Bag (Reusable): 1 L & 0.5 L sizes Technical Specifications:
a) Heavy duty pressure cuff specially designed for
rapid infusion/pressurized infusion of fluids.
b) Suitable for pressure up to 400 mm of Hg. c) Transparent material to enhance the visibility of
the fluid transfer/flow.
d) Easy to use, hook-and-loop fastener enables
easy replacement of Infusion bag without
removal of Pressure Cuff from drip stand. e) Instant venting through the three way stop cock
enables quick deflation of the cuff.
f) Clear & precise pressure gauge facilitates rapid
& reliable pressure control.
g) Squeeze bulb is supple, faster & easier to
operate for fast inflation.
20 pc of 0.5
L size
10 pc of 1 L size
1600.00(
0.5 L
size), and
1040.00
(1 L size)
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 43 -
h) Must conform to BIS / CE safety standards.
14 Percutaneous
dilatation
tracheostomy kit
(incorporating the Seldinger
technique and
reusable
“Guidewire
Dilating Forceps”)
Percutaneous dilatation tracheostomy kit
(incorporating the Seldinger technique and reusable
“Guidewire Dilating Forceps”) Technical Specifications: a) Percutaneous dilatation tracheostomy kit
(incorporating the Seldinger technique and reusable
“Guidewire Dilating Forceps”) with 7.0 mm ID cuffed
tracheostomy tube.
b) Must have US-FDA and CE approved safety features
& components.
4 (Four)
2400.00
15 Multimodal ICU Ventilator
Multimodal ICU Ventilator Technical Specifications:
a) Electric piston / turbine driven multimodal ICU
ventilator (Spont-PS, AC-VCV, AC-PCV, SIMV-VCV,
SIMV-PSV, Adaptive-BiPAP, PEEP, invasive and non-
invasive ventilation modes for adult & pediatric patients.
b) Must conform to the following Standards & Safety
Requirements: ISO 10651-2, ISO 10651-3, ASTM
F1100-90, IEC 60601-1, IEC 60601-1-2, IEC 60601-2-
12, UL 94 HB or better.
2 (Two)
12000.00
16 Portable multi-
parameter patient monitor
Portable multi-parameter patient monitor Technical Specifications: a) Portable multi-parameter patient monitor with
SpO2, ECG, NIBP, and Temperature, with wireless
LAN, and 3 h battery backup each mounted on
adjustable wall bracket.
b) Two (2) sets of standard accessories for ECG, SpO2 (adult, pediatric, neonate), NIBP cuff & hose (adult,
pediatric, neonate), temperature probe,
c) Must have US-FDA and CE approved safety features
& components.
4 (Four)
19200.0
0
17 Patient-transfer
slide-board
Patient-transfer slide-board Technical Specifications: a) Patient-transfer slide-board for Operation Theater,
(approx. dimensions: 1500 mm x 550 mm, L x W) made
of lightweight & resilient radiolucent material of high
impact tolerance, good anti-static properties,
maintenance-free and easy to clean.
b) Must be CE approved.
4 (Four)
2240.00
18 Adult half body basic CPR (BLS)
Adult half body basic CPR (BLS) training Manikin Technical Specifications:
2 (Two)
960.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 44 -
training Manikin
a) Half-body CPR (BLS) Training Manikin with
conforming to AHA (American Heart Association) 2015
guideline for CPR and ECC.
b) Must be able to support the performance of opening the airway, artificial breathing and external cardiac
compression.
c) While performing artificial aspiration, observable
chest rise must be present.
d) External chest compression: feedback for correct
compression dept (5-6 cm), correct compression site with prompt correct buzzing sound.
e) Excessive compression, prompt alarming buzzing
sound must be present.
f) Operation frequency: >100/min, with “tick” sound
g) Power: battery
19 Adult advanced CPR (ACLS)
training Manikin
with monitor &
printer
Adult advanced CPR (ACLS) training Manikin with monitor & printer: Technical Specifications:
a) Must combine the standards of the 2015 ACC-AHA
& ECC guidelines, with up-gradability to future revised
guidelines.
b) Guide standards of implementation of standards: the American Heart Association (AHA), 2015
International cardiopulmonary resuscitation (CPR) &
Emergency Cardiovascular Care (ECC).
c) Anatomical features must be clear, feel real, unified
color, realistic shape, and aesthetic appearance. d) Must simulate vital signs: the initial state, analog
mydriasis, the carotid artery pulsation.
e) After successful treatment, the simulated human
pupil must return to normal.
f) Must have feature of judging consciousness,
emergency call, pulse check, check breathing, remove foreign bodies of five operations.
g) Artificial respiration and heart functions.
h) Airway open manuvers.
I) Modes of operations: CPR training, simulation,
assessment and actual assessment. j) CPR display functions:Electronically monitored
airway open and press parts. Artificial respiration and
external cardiac compressions and the correct number
and the number of errors.
220V power supply.
k) Recording & Printer Features: Choice of operating
1 (one)
4000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 45 -
simultaneously print operation and choice of operation
after the resuscitation.
The printed transcript must cover covers the mode of
operation, the sense of judgment, rescue breathing, pulse check, check breathing, remove foreign bodies,
each cycle of operation the number of compressions
and blowing, pressing the right / wrong number, press
the wrong reasons and frequency, inflatable the right /
wrong reasons and frequency of blowing the wrong
reasons, set the time, operating time and the evaluation.
RF remote control functions:
l) RF remote control: The instructor can start by
remote control CPR, stop, pupillary changes, with or
without pulse, printers, and other functions. Can also sense of judgment, emergency call, pulse check, check
breathing, remove foreign bodies to be recorded.
m) The material characteristics: face skin, neck skin,
chest skin, hair from high quality, and durable
material and should not distort while decontamination
and disassembly.
20 Child advanced
CPR (ACLS)
training Manikin
with monitor &
printer:
Child advanced CPR (ACLS) training Manikin with monitor & printer: Technical Specifications:
a) Must combine the standards of the 2015 ACC-AHA
& ECC guidelines, with up-gradability to future revised
guidelines. b) Guide standards of implementation of standards:
the American Heart Association (AHA), 2015
International cardiopulmonary resuscitation (CPR) &
Emergency Cardiovascular Care (ECC).
c) Anatomical features must be clear, feel real, unified
color, realistic shape, and aesthetic appearance. d) Must simulate vital signs: the initial state, analog
mydriasis, the carotid artery pulsation.
e) After successful treatment, the simulated human
pupil must return to normal.
f) Must have feature of judging consciousness, emergency call, pulse check, check breathing, remove
foreign bodies of five operations.
g) Artificial respiration and heart functions.
h) Airway open manuvers.
1 (one)
4000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 46 -
I) Modes of operations: CPR training, simulation,
assessment and actual assessment.
j) CPR display functions:Electronically monitored
airway open and press parts. Artificial respiration and external cardiac compressions and the correct number
and the number of errors.
220V power supply.
k) Recording & Printer Features: Choice of operating
simultaneously print operation and choice of operation
after the resuscitation. The printed transcript must cover covers the mode of
operation, the sense of judgment, rescue breathing,
pulse check, check breathing, remove foreign bodies,
each cycle of operation the number of compressions
and blowing, pressing the right / wrong number, press the wrong reasons and frequency, inflatable the right /
wrong reasons and frequency of blowing the wrong
reasons, set the time, operating time and the
evaluation.
RF remote control functions:
l) RF remote control: The instructor can start by remote control CPR, stop, pupillary changes, with or
without pulse, printers, and other functions. Can also
sense of judgment, emergency call, pulse check, check
breathing, remove foreign bodies to be recorded.
m) The material characteristics: face skin, neck skin, chest skin, hair from high quality, and durable
material and should not distort while decontamination
and disassembly.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 47 -
SL. NO. NAME OF EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
REQUIREMENTS /QTY(FOR ESI-PGIMSR, JOKA)
EMD VALUE
QUOTED
(YES/NO)
DEPARTMENT. OF OBST. & GYNAE. ESI-PGIMSR, JOKA 1 Cardiotocographi
c fetal monitor
with Maternal
Monitor
Specification of Cardiotocographic fetal monitor
with Maternal Monitor.
Standard size colour TFT screen monitor for display
of wave forms and digital
Automatic fetal movement detection facility in wave
forms.
Standard twin pregnancy monitoring system
Support for external thermal printer or ink jet printer
Built- in rechargeable battery and AC/DC power
supply.
Built-in network capability.
24 hours monitoring, data storage and reload
capacity.
Fetal heart acceleration and deceleration
measurement ability
03 pcs 15000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 48 -
Fetal heart base line beat to beat variation and
acceleration, deceleration analysis capability.
Printing functions with paper for documentation.
Automatic monitoring mode and convenient operation
by manual/digital keys and rotary knob.
Light and auto-alarm ability complying with
international standard.
OPTIONAL (Additional Specification):
Maternal monitoring parameters may be present in
addition to fetal monitoring system.
ECG
SPO2
NIBP
Respiratory rate
Temperature
Other parameters
2 Delivery Bed Specifications
Delivery Bed:
Overall size: 1880L X 900w X600-800H mm.
Tubular Frame work mounted on 125 mm dia
castor two with breaks.
Three Section top made of MS pipe with fixed
cushioned mattress.
02 pcs 5000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 49 -
Height Adjustment preferably Hydraulic
height adjustment & back section
adjustment through electric actuator
system.
Trendlenburg/ Reverse Trendlenburg
Positions through pneumatic pump.
Leg end section can slide under the main
section. Wheel lock system must be
present.
Provided with a pair of upholstery lithonomy
position.
SS telescopic IV Rod.
Detachable SS Tray. 3 MICROSCOPE MICROSCOPE SPECIFICATIONS
Optical System: UIS2 (Universal infinity-corrected) optical system
Illumination:
Built-in transmitted Koehler illuminator 6V/30W halogen bulb 100-120V/220-240V ~ 0.85/0.45A 50/60Hz
Focusing:
Stage height movement by roller guide (rack and pinion) Stroke per rotation: 36.8mm Full stroke range: 25mm Upper limit stopper Tension adjustment on coarse focus adjustment knob
Revolving Nosepiece: Fixed quadruple nosepiece with inward tilt
Observation Tube:
Type: U-CBI30-2, Binocular U-CTR30-2, Trinocular
Field Number: 20 20
02 pcs 30000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 50 -
Tube inclination:
Interpupillary distance adjustment range:
30°
48mm-75mm
30°
48mm-75mm
Light path selector: None
None (Bi 50%, Video/Photo 50% fixed)
Stage:
Size: 188mm(W) x 134mm(D)
Movement range: 76mm X-direction x 50mm Y-direction
Specimen holder: Double slide holder
Rubber grip: Equipped as standard
Condenser:
Type: Abbe condenser
NA: 1.25 with oil immersion
Aperture in iris: Built-in
Dimensions & Weight:
233mm(W) x 432mm(H) x 367.5mm(D), approximately 8.5kg (approx. 18.7lbs.)
4 Portable
Ultrasound
Specifications of Portable Ultrasound Machine
01 pc 10000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 51 -
Machine
1. The unit should be compact, light weight,
portable,sturdy and resistant to break & damage..
2. It should be suitable for vascular access (CVC
placement,PICC) Nerve blocks(Lower as well as
upper extremity),E-FAST examination, AAA
Exam, small parts, applications in adults and
paed. patients and also suitable for
echocardiography & interventions. Multiple
preloaded applications presets should be available
for the above.
3. The unit must have real time compound
imaging for improved contrast resolution &
eliminating ultrasound artifacts to achieve
optimum image quality.
4. The unit must have automatic gain adjustment
for B mode imaging
5. Scanning depth must be available up to 35 cm.
6. System should support transducer technologies
like convex, linear and phased array.
7. Imaging modes of real time 2D, color Doppler,
Pulsed wave Doppler, Continuous wave Doppler
and Power Doppler must be available in all
probes.
8. Simultaneous connectivity of at least 2 probes.
9. System must have fast start up to scanning in
less than 60 seconds as essential in critical and
emergency situation in ICU, emergency & OT.
10. Cine memory on all modes
11. DICOM ready system with facility to print
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 52 -
along with printer, store, ready to connect to
PACS
12. Flat LCD/TFT monitor of at least 10” with
flicker free image
13. Alphanumeric soft keys keyboard with easy
access scans controls, facility to sanitize the
system keyboard
14. to avoid cross contamination must be
available
15. Onboard storage of at least 10,000 images
,USB port for connectivity to computer
16. Should be able to operate both on AC and
battery. Battery pack should be self recharging
and should last at least for 2 hours when fully
charged.
17. Transducers to be provide as standard.
High frequency Linear transducer 6-12 MHz
with 60mm size for vascular access, small parts,
vascular, muscuskeltal
interscalene,Supraclavicular,Axillary,Musculocuta
neus,Popliteal,Saphenous.
Higher frequency will be preferred.
Convex transducer 2-5 MHz for deep nerve
access specially Celiac,Sciatic
nerve,Epidural,Subgluteal & abdominal
applications.
Broad band phased array transducer,1-5 MHz
for accessing the cardiac function & other related
application.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 53 -
Needle guide must be supplied for Linear &
Convex probes along with 20 compatible needles
with the unit.
18. System should be supplied with trolley.
19. Valid US FDA/CE(European)/BIS
certification.
5 Digital Fetal
Doppler
Specifications for digital Fetal Doppler:
Fetal doppler CE approved, with blue
blacklight for dark sight
Easy operation for everyone, over 10 years
quality satisfaction
Tm-100B Fetal Doppler CE Approved
Ultrasound frequency : 2.5+-0.25Mhz
Ultrasound output power : 10mW/cmDC
Power supply:9.6V rechargeable battery
Working environment temperature : 10-40
01 pc 2000.00
6 COLPOSCOPE
TECHNICAL SPECIFICATIONS COLPOSCOPE
1. Should be a basic model with binocular tubes
with inter papillary adjustment and vertical stand.
2. Should have a working range with fine focus of
minimum 40mm.
3. Should have a 12.5x or 13.5x or 15x eye piece.
4. Should have a standard objective of working
distance between 250 to 300mm.
01 pc 2000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 54 -
5. The vertical stand should have at least 4
wheels and at least 2 of them should have
breaking facility.
6. The vertical joint should be rotatable and
should have vertical height adjustment.
7. The head should be tiltable and should have
positioning handle.
8. Should use a halogen light source with coaxial
illumination.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 55 -
SL. NO.
NAME OF EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
REQUIREMENTS /QTY(FOR ESI-PGIMSR, JOKA)
EMD VALUE
QUOTED (YES/NO)
DEPARTMENT OF EYE 1 C-mount , camera,
TV Attachment for video
C-mount 1 6000.00 Single Chip camera (Ex-stock) 1 Color TV (Ex-stock) 1
2 SLIT LAMP WITH MOTORIZED STAND
SLIT LAMP WITH MOTORIZED STAND Binocular Microscope Eye piece 10x16×25×40× Step magnification 8D compensation of ametropia Interpupilary adjustment : 50-80 mm Slit width: minimum 0-8 mm continuously adjustable Slit length: continuous from 8 mm to 1 mm minimum Slit angle : 0-180 degree continuous Slit Inclination: 5,10, 15,20 degree Filters: Blue, Red free , Grey & heat absorbing Bulb: Tungsten bulb Imaging facility
01pc
30000.00
3 VISUAL FIELD
RECORDING
INSTRUMENT
TECHNICAL SPECIFICATION FOR VISUAL FIELD RECORDING INSTRUMENT
( PERIMETER SYSTEM) Specification:
Stimulus intensity 0.03 -10,000 Asb Stimulus Duration 0.1 – 9.98 secs Stimulus Wavelength Broadband visible light Maximum Bowl illumination 31.5 ASB GPA Software
01 pc 10000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 56 -
Testing features: Threshold Testing Library Central Field Testing Patterns: 30-2, 24-2, 10-2 Macula Peripheral Field Test Patterns: 60-4, Nasal Step Screening Test Library Central Field Patterns: C-40, C-64, C-76, C-80, C-Armaly Peripheral Field Test Patterns: P-60, DD-81, FF-120, FF-135, FF-246, FF-Armaly, Nasal Step Specialty Test Library Esterman monocular Esterman binocular Superior 36 Superior 64 Stimulous / background color White on white User defined test storage User features: Fixation Monitoring Heiji Krakau blind spot monitor Video eye monitor Trial lens Holder Remote video eye monitoring capability Operator interface Help Menu Touch screen on CRT Motorized chin rest Printer Printex Thermal printer, table mounted Patient data input Name, Birth Date, ID, Trial Lens, VA, Pupil size IOP, C/D ratio, Diagnosis Code, Procedure Code, Comments
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 57 -
4 Flash Autoclave 1. Size: Minimum 20 Litre 2. Reservoir: 3 to 5 Litre 3. Tray: Minimum 3 in number 4. Air removal: vacuum pump 5. Total sterilization with vacuum dry: shouldn’t
take more than 30 min. 6. Exposure temperature: 121⁰ C/ 134⁰ C 7. Fully automatic, microprocessor controlled 8. Attached printer 9. European ‘B’ class certified
01 pc 10000.00
5 PHACOEMULSIFI
ER Based on peristaltic pump technology.
o Crystal phaco hand piece. o Multimode phaco (Continuous /
pulse / burst). o Occlusion mode phaco. o Cool microincision phaco. o In phaco mode.
Vaccum level 0-500 mm Hg
Pump flow rate 0-50cc
o Continuous irrigation facility. o Bipolar diathermy with selectable
power. o High speed anterior segment
vitrectomy preferably with electric cutter.
o Foot switch control for irrigation, I/A, phaco.
01 pc 10000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 58 -
SL. NO.
NAME OF EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
REQUIREMENTS /QTY(FOR ESI-PGIMSR, JOKA)
EMD VALUE
QUOTED (YES/NO)
DEPARTMENT OF ANATOMY
REQUIREMENT OF LIST OF BONES: Technical Specifications:
1 Full skeleton 10 sets
24000.00
2 Vertebral column 10 sets
20000.00
3 Vertebral column with pelvis 10 sets
20000.00
4 Articulated pelvis 10 sets
20000.00
5 Full Skeleton Loose bones 10 sets
24000.00
6 Full Skull with mandible attached 10 sets
30000.00
7 Full Skull without mandible 10 sets
30000.00
8 Cut section of skull 10 sets
26000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 59 -
SL. NO.
NAME OF EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
REQUIREMENTS /QTY(FOR ESI-PGIMSR, JOKA)
EMD VALUE
QUOTED (YES/NO)
REQUIREMENT OF ITEMS AND INSTRUMENTS Specifications
9 Tanks(portable)-STEEL(Accommodate at least 3 complete human bodies)
6 pcs
14400.00
10 Student microscopes (Light) 50pcs
25000.00
11 Revolving stools(Steel) 250 pcs
11000.00
12 Dissection tables(full size) 15 pcs
18000.00
13 Dissection tables(small size) 6 pcs
4800.00
14 Student lockers 100 pcs
30000.00
15 Full model human male and female (detachable)- Vinyl model
1 set each
500.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 60 -
SL. NO.
NAME OF EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
REQUIREMENTS /QTY(FOR ESI-PGIMSR, JOKA)
EMD VALUE
QUOTED (YES/NO)
Laminated Histology Charts and models and viscerae and Slides- provided separately MODELS/CHARTS FOR MUSEUM: Specifications
16 Full skeleton 3 sets 720.00 for
Model & 78.00 for
Chart
17 Vertebral column 3 sets 720.00 for
Model & 78.00 for
Chart
18 Vertebral column with pelvis 3 sets 720.00 for
Model & 78.00 for
Chart
19 Articulated pelvis 3 sets 720.00 for
Model & 78.00 for
Chart
20 Full Skeleton Loose bones 3 sets 720.00 for
Model & 78.00 for
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 61 -
Chart
21 Cardiac muscle 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
22 Skeletal muscle 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
23 Smooth muscle 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
24 Compact bone 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
25 Spongy bone 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
26 Spleen 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 62 -
27 Lymph node 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
28 Tonsil 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
29 Thymus 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
30 Trachea 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
31 Lung 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
32 Submandibular gland 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
33 Sublingual gland 1 set 240.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 63 -
each Model & Rs. 26.00 For each
chart) 34 Parotid gland 1 set 240.00
each Model & Rs. 26.00 For each
chart)
35 Tongue 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
36 Esophagus 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
37 Stomach(body) 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
38 Stomach (pylorus) 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
39 Liver 1 set 240.00 each
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 64 -
Model & Rs. 26.00 For each
chart) 40 Pancreas 1 set 240.00
each Model & Rs. 26.00 For each
chart)
41 Duodenum 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
42 Jejunum 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
43 Ileum 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
44 Large intestine 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
45 Cecum with APPENDIX 1 set 240.00 each
Model &
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 65 -
Rs. 26.00 For each
chart) 46 Gall bladder 1 set 240.00
each Model & Rs. 26.00 For each
chart)
47 Kidney 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
48 Ureter 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
49 URINARY BLADDER with prostate 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
50 TESTIS with vas deferens 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
51 Ovary 1 set 240.00 each
Model & Rs. 26.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 66 -
For each chart)
52 UTERUS with uterine tube 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
53 Vagina 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
54 Thyroid 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
55 Suprarenal gland 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
56 Pituitary gland 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
57 Skin 1 set 240.00 each
Model & Rs. 26.00 For each
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 67 -
chart) 58 Mammary gland 1 set 240.00
each Model & Rs. 26.00 For each
chart)
59 Spinal cord 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
60 Cerebrum 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
61 Cerebellum 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
62 Eye 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
63 Placenta 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 68 -
64 Umbilical cord 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
65 Ear 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
66 Tongue 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
67 Zona pellucida 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
68 Morula 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
69 Blastocyst 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
70 Sperm 1 set 240.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 69 -
each Model & Rs. 26.00 For each
chart) 71 Ovum-matured 1 set 240.00
each Model & Rs. 26.00 For each
chart)
72 Ovum-immatured 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
73 Placenta 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
74 Placental barrier 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
75 Turner syndrome 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
76 Kleinfelter syndrome 1 set 240.00 each
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 70 -
Model & Rs. 26.00 For each
chart) 77 Fallot’s tetralogy 1 set 240.00
each Model & Rs. 26.00 For each
chart)
78 Velamentous placenta 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
79 Battledore placenta 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
80 Trilaminar germ disc 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
81 Bilaminar germ disc 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
82 Developing notochord 1 set 240.00 each
Model &
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 71 -
Rs. 26.00 For each
chart) 83 Neural tube defects 1 set 240.00
each Model & Rs. 26.00 For each
chart)
84 Physiological hernia 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
85 Developing foregut 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
86 Developing midgut 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
87 Developing hindgut 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
88 Devleoping heart 1 set 240.00 each
Model & Rs. 26.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 72 -
For each chart)
89 Descent of testis 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
90 Developing kidney 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
91 Anatomy of pouch of douglas 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
92 Developing male reproductive system 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
93 Developing female reproductive system 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
94 Developing brain 1 set 240.00 each
Model & Rs. 26.00 For each
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 73 -
chart) 95 Developing tongue 1 set 240.00
each Model & Rs. 26.00 For each
chart)
96 Developing eye 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
97 Developing lens 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
98 Devloping inner ear 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
99 Developing pinna 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
100 Middle ear 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 74 -
101 Semicircular canals 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
102 Long bone of child showing blood supply 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
103 Long bone of adult showing blood supply and ossification
1 set 240.00 each
Model & Rs. 26.00 For each
chart)
104 Developing pituitary 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
105 Developing suprarenal 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
106 Neural crest cells and derivatives 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
107 Karyotyping 1 set 240.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 75 -
each Model & Rs. 26.00 For each
chart) 108 Development of diaphragm 1 set 240.00
each Model & Rs. 26.00 For each
chart)
109 Development of liver 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
110 Development of spleen 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
111 Development of lungs 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
112 Bifurcaion of trachea 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
113 Larynx 1 set 240.00 each
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 76 -
Model & Rs. 26.00 For each
chart) 114 Pharynx 1 set 240.00
each Model & Rs. 26.00 For each
chart)
115 Mandible 1 set 240.00 each
Model & Rs. 26.00 For each
chart)
LIST OF VISCERAE TO BE PROVIDED FOR MUSEUM DISPLAY PURPOSE IN GLASS VESSELS (MOUNTED) THORAX (MUSEUM)
116 Right lung 2 pcs
3600.00
117 Left lung 2 pcs
3600.00
118 Heart 2 pcs
5600.00
119 Heart with pericardium 2 pcs
5600.00
120 Trachea with oesophagus 2 pcs
5600.00
121 Trachea 2 pcs
5600.00
122 Diaphragm 3 pcs
8400.00
ABDOMEN, PELVIS & PERINEUM (MUSEUM) 123 Liver 2 pcs
2400.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 77 -
124 Kidney –right and left 4 each
4800.00
125 Kidney (both) + urinary bladder 1pc
1200.00
126 Spleen 4 pcs
4800.00
127 Duodenum + pancreas + spleen 3 pcs
3600.00
128 Stomach 4 pcs
4800.00
129 Jejunum + ileum 3 pcs
3600.00
130 Caecum with appendix 3 pcs
3600.00
131 Rectum + anal canal 3 pcs
3600.00
132 Small intestine 3 pcs
3600.00
133 Large intestine 3 pcs
3600.00
134 Male composite viscera 2 pcs
2400.00
135 Female composite viscera 2 pcs
2400.00
136 Urinary bladder with prostate gland 2 pcs
2400.00
137 Urinary bladder 2 pcs
2400.00
138 Testis right and left 4each
4800.00
139 Perineum male 1 pc
1200.00
140 Perineum female 1pc
1200.00
BRAIN & SPINAL CORD(MUSEUM)
141 Spinal cord 4pcs 7200.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 78 -
142 Meninges 3 pcs
5400.00
143 Whole brain (both the hemispheres) 2pcs 3600.00
144 Cerebrum - half brain (one hemisphere) 2 each
3600.00
145 Cerebellum 3pcs
5400.00
146 Cerebellum + brain stem 3 pcs
5400.00
147 Brainstem 2 pcs
3600.00
148 Cerebrum with brain stem 2 pcs
3600.00
HEAD & NECK(MUSEUM) 149 Sagittal section
(showing pns, pharynx, larynx & nasal cavity) 3 each
3000.00
150 Eyeball 12 pcs
12000.00
151 Eyeball sagittal section 4 pcs
4000.00
152 Eyeball coronal section 4 pcs
4000.00
153 Lens 4 pcs
4000.00
154 Thyroid gland with isthmus 3 pcs
3000.00
155 Composite viscera (tongue + larynx+ pharynx) 4 sets 4000.00 LIMBS (MUSEUM) 156 Axilla with arm 2 pcs
3200.00
157 Cubital fossa 2 pcs
3200.00
158 Palm 2 pcs
3200.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 79 -
159 Wrist 2 pcs
3200.00
160 Complete upper limb 3 pcs
4800.00
161 Complete lower limb 3 pcs
4800.00
162 Ts forearm 2 pcs
3200.00
163 Ts arm 2pcs
3200.00
164 Femoral triangle with back of thigh 2 pcs
3200.00
165 Leg with foot 2 pcs
3200.00
166 Ts thigh 2 pcs
3200.00
167 Ts leg 2 pcs
3200.00
SLIDE SETS REQUIRED 168 Cardiac muscle 50 sets 300.00
169 Skeletal muscle 50 sets 300.00 170 Smooth muscle 50 sets 300.00
171 Ts- compact bone 50 sets 300.00 172 Ts-spongy bone 50 sets 300.00
173 Hyaline cartilage 50 sets 300.00 174 Elastic cartilage. 50 sets 300.00
175 Fibro cartilage 50 sets 300.00
176 Artery 50 sets 300.00 177 Vein 50 sets 300.00
178 Spleen 50 sets 300.00 179 Lymph node 50 sets 300.00
180 Tonsil 50 sets 300.00
181 Thymus 50 sets 300.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 80 -
182 Trachea 50 sets 300.00
183 Lung 50 sets 300.00 184 Submandibular gland 50 sets 300.00
185 Sublingual gland 50 sets 300.00 186 Parotid gland 50 sets 300.00
187 Tongue 50 sets 300.00
188 Esophagus 50 sets 300.00 189 Stomach(body) 50 sets 300.00
190 Stomach (fundus) 50 sets 300.00 191 Stomach (pylorus) 50 sets 300.00
192 Liver 50 sets 300.00
193 Pancreas 50 sets 300.00 194 Duodenum 50 sets 300.00
195 Jejunum 50 sets 300.00 196 Ileum 50 sets 300.00
197 Submandibular gland 50 sets 300.00 198 Appendix 50 sets 300.00
199 Gall bladder 50 sets 300.00
200 Kidney 50 sets 300.00 201 Ureter 50 sets 300.00
202 Urinary bladder 50 sets 300.00 203 Testis 50 sets 300.00
204 Vas deferens 50 sets 300.00
205 Prostate 50 sets 300.00 206 Ovary 50 sets 300.00
207 Uterine tube 50 sets 300.00 208 Uterus 50 sets 300.00
209 Vagina 50 sets 300.00 210 Thyroid 50 sets 300.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 81 -
211 Suprarenal gland 50 sets 300.00
212 Pituitary gland 50 sets 300.00 213 Skin ls (thick) 50 sets 300.00
214 Skin (thin) 50 sets 300.00 215 Mammary gland (active) 50 sets 300.00
216 Mammary gland (inactive) 50 sets 300.00
217 Spinal cord 50 sets 300.00 218 Cerebrum 50 sets 300.00
219 Cerebellum 50 sets 300.00 220 Retina 50 sets 300.00
221 Cornea 50 sets 300.00
222 Placenta 50 sets 300.00 223 Umbilical cord 50 sets 300.00
224 Tongue 50 sets 300.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 82 -
225 CADAVER
STORAGE TANKS (Full SS)
CADAVER STORAGE TANKS (Full SS) (Accommodate full human cadavers- at least 2 in each tank) Specification
1. OVER ALL SIZE: 72” (L) x 60” (W) x 24” (H)
WITH CASTER
2. FOUR SIDES ENCLOSED BY 1.6 MM SS SHEET 3. BOTTOM SHELVES MADE OF 1.6 MM SS SHEET
4. BOTTOM STRUCTURE MADE OF 40 X 40 X 6 MM ANGLE FRAME
5. LIDS MADE OF 1.2 MM SS SHEET (DOUBLE SHEET MOULDED) WITH ONE HAVING
HANDLE-6.
6. INSIDE ONE HAVING BOWL FOR DRAINAGE WATER. WHEN GET THE SOLUTION
7. RAISED INSIDE THE CABINET THEN CLOSED THE ADJUSTABLE KNOB. 8. MOUNTED ON 200 MM CASTER (HEAVY DUTY)
9. EVERY JOIN WITH ARGON WELDING.
10. FINISH WITH GLOSSY POLISH.
06 pcs 15000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 83 -
SL. NO.
NAME OF EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
REQUIREMENTS /QTY(FOR ESI-PGIMSR, JOKA)
EMD VALUE
QUOTED
(YES/NO)
Department of Orthopedics 1 Prone position head rest (gel padded), dimensions: 280
x 240 X 140 mm adult size
01 pc
400.00
2 Universal patient positioner (gel padded) large, 380 X 140 X 80 mm for shoulder, lateral torso and under knees support adult size
02 pcs
480.00
3 Dome shape flat bottom gel positoner, large 510 x 150 X 125 mm (semicircular cushion positioner) for chest, pelvis and leg support in prone position, adult size.
02 pcs
400.00
4 High Definition Arthroscopy Set
Specification of High Definition Arthroscopy Set: True High Definition (HD 3 Chip) Camera System 1080p-1 No
720p, 1080i, 1080p Selectable Multiple digital outputs (HD & SD Outputs) Light source communication Electronic zoom (in p-modes only) Autoclavable Camera Head Shockflex prism mounting Resolution 1920X1080p, Light up card edge receptable Progressive scanning, Aspect ratio 16:9 2 Camera Head Buttons for 4 Remote Fuctions
300W Xenon Light Source- 1 No
Automatically adjust to optimal light intensity Auto Bulb saver function
01 set 70000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 84 -
Stand by Mode Homogenized Light distribution Light Guide Locking Mechanism OLED Window
Fiber Optic Light Guide Cable 5mm, Autoclavable-1 No High Definition Monitor- 1 No
24 '' or More Fully High Definition Monitor Fully compatible with HD and Digital peripherals Sealed front panel in light-weight design with
VESA mount Wide-screen 16:9 aspect ratio PIP functionality Conntrast Ratio-1000:1 Resolution- 1920x1200
High Definition Arthroscope, 4mm, 30 deg, Autoclavable-1 No Arthroscope sheath- 1 No
5.9mm, Dual Stopcock system, Autoclavable, including Obturator
Shaver Console -1 No
Shaver Console 230 Volt Capacity to recognize the Hand piece, display of
speed The console should have option for connecting
Large Bone Drill & Saw Handpiece. Shaver Hand Piece-1 No
500- 12,000rpm, 500- 2,500 cpm, Single and Multi-turn Oscillate
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 85 -
Chuck for small drilling (for shoulder anchors etc) -1 No
Shaver Hand Piece should adapt the chuck Cutters
Full Radius resector, 4.2mm, 13 cm-6 Nos Bendable Cutter-6 Nos Bender for bendable cutter-1 No
Wireless Foot control-1 No
3 pedal foot control Hand Instruments
Wide bite Straight punch-1 No Alligator Grasper-1 No Hook Probe-1 No 90 deg rotary puch,right 90 deg rotary punch,left
Arthroscopic Pump System-1 No
Easy to setup and use. Flow not less than 2 lt / min. Pressure ranging 30 - 150 mmHg Weight should not more than 7 lbs System should be supplied with auclavable remote
control Inflow / out flow tubing set-10 Nos Arthroscopy Trolley(Indian)-1 No
The System should be CE/US FDA Approved.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 86 -
5 C-ARM
MACHINE (IMMAGE INTENSIFIER)
SPECIFICATION OF C-ARM MACHINE (IMMAGE INTENSIFIER) (C-ARM FULLY MICROPROCESSOR BASED SYSTEM WITH FEATHER TOUCH PANAL) IMAGE INTENSIFIER:
6 & 9 with high imaging System with high performance capability
CONTROL PANNEL & GENERATOR:
All operation on control panel k-board. Microprocessor based control with feather touch
panel. Generator unisearch IMD unit. Excellent fluoroscopy. Radiography output 25mA. On requirement Fluoroscopy: foot switch & on the control panel. Kvp variation of 40 -110kvp. 3 step mode selection, normal (LIH), PULSE and
LIVE control. Digital kvp metering display. Digital ma metering display. Foot switch.
X-RAY TUBE HEAD (User Friendly Design):
Duel focus having 0.6mmand 1.8mm focus. Anode heat storage capacity 30kj. Anode cooling rate250 w/hr. Type of Generator – khz hf X-Ray Tube - Fluro 0.6mm X 0.6mm Focal Spot - 1.5mm X 1.5mm Fluro / Radio KVP - 40-110kvp Fluro mA - 0-4 mA Fluro Timer - 5 Minute
01 set 18000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 87 -
MAS - Up to 200 Power Requirement - 220V/50-60 hz & 3.5 kw Image Intensifier - 9 Inch
C-ARM FEATURE Rotation 360Degree Source to II Distance 90Cms Arc orbital Movements 110Degree Pann movements 0-25Degree Horizontal Travel 22 cms Vertical motorized movement 32cms Detachable Cassette Holder (Option) 10” x
12”&8” x 10” TV MONITORS
15” / 17” Colour (Option) 625 Lines 50-60 hz High resolution display capability monitor.
MEMORY OPTION 26 frame memory Computer compatible (Option) 100 frame memory (Option)
6 Orthopaedic
Electric Drill System
Orthopaedic Electric Drill System:
04 pcs (against condemnationof Battery operated drill)
10000.00
Driving Unit includes Motor, Stand, foot Control, Flexible Shaft-1Pc, Tool Kit, Oil Bottle & special container
Cannulated Drill Hand piece max. speed 1200 RPM & with Fixed S.S.Chuck (0-1/4”)
Reaming Handpiece with Max. Speed 400 R.P.M. Cannulated & AO type quick coupling.
Drill Chuck Adaptor with Jacob’s Stainless Steel
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 88 -
Chuck (USA) Pistol Grip Sagital Saw (Set of five blades) Flexible Reamers (2 pieces with reaming pieces
6mm – 13mm) 7 DIGITAL
ELECTRONIC TOURNIQUET
SPECIFICATION OF DIGITAL ELECTRONIC TOURNIQUET:
Cuff pressure range: 10 to 450mmHg. Pressure regulation: +/- 10mmHG of set point. Online Setting: Increase and decrease in pressure
settings Timer: Timer range from 9hours to 59minutes. Internal least count: Timer 1minute/Internal
1/1000 second. Alarm & Display Indication:-
When set pressure is over When pressure goes 25mmHg above set
pressure. When pressure goes 25mmHg below set
pressure. In battery mode, when battery voltage
reaches 9V. Memory: Pressure set in earlier session is stored
and displayed, when machine is switched on again.
Pressure Table: Maintains set pressure under leak condition.
Backup: 3hours battery backup. (on full charge) Switch over: Automatic switch over from offline
to online (vise versa). Power: 230V(AC)/50Hz ± 10% (Voltage
fluctuations from 180-270).
04 pcs 2500.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 89 -
Stabilizer: Inbuilt. Cuffs: Different Sizes of five cuffs—washable &
easy fitting (Paediatric, small, medium, big & large).
Digital Display: Digital Display of time elapsed, set time, actual and set pressure.
8 SMALL
FRAGEMENT INSTRUMENT SET
SMALL FRAGEMENT INSTRUMENT SET Content List:--
i) Drill Bit Q.C.End 2.5mm Dia—115mm
Length—2Pcs.,
ii) Drill Bit Q.C.End 3.2mm Dia—130mm
Length—2Pcs.,
iii) Counter Sink—6mm Head—1Pc.,
iv) Quick Coupling Handle—T-Type—1Pc.,
v) Tap with T-Handle for 3.5mm Cortical Screw—
2Pcs.,
vi) Tap with T-Handle for 4.0mm Cancellous
Screw—2Pcs.,
vii) Drill & Tap Sleeve combined 2.5/3.5mm—1Pc.,
viii) Insert Drill Sleeve 2.5mm—1Pc.,
ix) Screw Driver Shaft Q.C.End ---2.5mm Tip—
1Pc.,
x) Hexagonal Screw Driver 2.5mm tip—1Pc.,
xi) Small Depth Gauge—1Pc., Sharp Hook—1Pc.,
xii) Small Neutral & Loaded Drill Guide—1Pc.,
03 sets 1200.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 90 -
xiii) Spanner—11mm—1Pc.,
xiv) Small Plate Bender—pair—1Pair.,
xv) Plier Cum Wire Bender—1Pc.,
xvi) K-Wire Bender—1Pc.,
xvii) Reduction Forceps—Serartted---Ratchet
Lock—140mm—1Pc.,
xviii) Reduction Forceps—Pointed---Ratchet
Lock—140mm—1Pc.,
xix) Self Centering Bone Holding Forceps—
190mm—1Pc.,
xx) Hohmann Retractor 8mm wide, short narrow
point, 160mm Length. 2Pcs.,
xxi) Hohmann Retractor 15mm wide, 160mm
Length—2Pcs..,
xxii) Periosteal Elevator ---Straight—160mm
length —8mm—1Pc.,
xxiii) Instrument Box with two trays length 300mm—1Pc.
9 LARGE FRAGEMENT INSTRUMENT SET
LARGE FRAGEMENT INSTRUMENT SET Content List:--
i) Drill Bit Q.C.End 3.2mm Dia—130mm
Length—3 Pcs.,
ii) Drill Bit Q.C.End 4.5mm Dia—130mm
Length—1Pc.,
iii) Counter Sink—8mm Head—1Pc.,
03 sets 1500.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 91 -
iv) Quick Coupling Handle—T-Type—1Pc.,
v) Tap with T-Handle for 4.5mm Cortical Screw—
2Pcs.,
vi) Tap with T-Handle for 6.5mm Cancellous
Screw—1Pc.,
vii) Insert Drill Sleeve 3.2mm—1Pc.,
viii) Drill & Tap Sleeve combined 3.2/4.5mm —
1Pc.,
ix) Drill & Tap Sleeve combined 3.2/6.5mm—1Pc.,
x) Screw Driver Shaft Q.C.End ---3.5mm Tip—
1Pc.,
xi) Large Hexagonal Screw Driver 3.5mm tip—
1Pc.,
xii) Large Depth Gauge—1Pc.,
xiii) Sharp Hook—1Pc.,Spanner—11mm—1Pc.,
xiv) Large Neutral & Loaded Drill Guide—1Pc.,
xv) Pointed Drill Guide with 4.5mm Tap Sleeve &
3.2mm Drill Sleeve—1Pc.,
xvi) Large Plate Bender—pair—1Pair.,
xvii) Instrument Box with two trays length
300mm—1Pc.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 92 -
10 BASIC
INSTRUMENT SET
BASIC INSTRUMENT SET Content List:--
i) Universal Open Hand Drill –2Pcs.,
ii) Wire Tightner Cum Wire Twister—1Pc.,
iii) Guide Wire Introducer with Four Pegs—1
Pc.,
iv) Plier Cum Wire Bender Cum Wire Cutter –9”
–1Pc.,
v) Wire Cutter Double Action Length 250mmm-
1Pc.,
vi) Self Centering Bone Holding Forceps
150mm—1 Pair,
vii) Self Centering Bone Holding Forceps
240mm—1 Pair,
viii) Self Centering Bone Holding Forceps
280mm—1 Pair,
ix) Reduction Forceps –Serrated—Speed Lock—
170mm—2 Pair,
x) Reduction Forceps –Serrated—Speed Lock—
200mm—2 Pair,
xi) Reduction Forceps –Serrated—Speed Lock—
240mm—2 Pair,
xii) Pattela Bone Holding Forceps –Four
Prongs—1 Pc.,
03 sets 1500.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 93 -
xiii) Lane Bone Holding Forcep with Ratchet
200mm—2 Pc.,
xiv) Lane Bone Holding Forcep with Ratchet
170mm—2 Pc.,
xv) Lane Bone Holding Forcep with Ratchet
200mm—2 Pc.,
xvi) Bone Cutting Forceps (Straight) Double
Action—190mm –1 Pc.,
xvii) Bone Cutting Forceps (Straight) Double
Action—270mm –1 Pc.,
xviii) Bone Cutting Forceps (Curved) Double
Action—190mm –2 Pcs.,
xix) Bone Cutting Forceps (Curved) Double
Action—225mm –1 Pc.,
xx) Chisel with Fibre Handles 5,10,20,30mm --
- 1 Pc. Each.
xxi) Osteotome with Fibre Handle Straight
5.10.14.16.20mm—1 Pc. Each.
xxii) Osteotome with Fibre Handle Curved
5.10.14.16.20mm—1 Pc. Each
xxiii) Bone Currette Double ended 4mmx6mm –
2Pcs.
xxiv) Bone Currette Double ended 6mmx9mm –
2Pcs.
xxv) Langenback Retractor---Small—1Pc.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 94 -
xxvi) Langenback Retractor---Large—1Pc.
xxvii) Bristow Retractor---1Pc.
xxviii) Self Retaining Retractor—Small—2 pcs.
xxix) Self Retaining Retractor—Medium—2 pcs.
xxx) Self Retaining Retractor—Large—1 pc.
xxxi) Periosteal Elevator Curved—6,10,14,20---
1 Pc. Each
xxxii) Bone Hammer 200,350,500gms--- 1 pc. Each
11 Large External Fixator
Large External Fixator Rod of dia 11 mm in
– Carbon fibre – lengths 100 – 400 mm – carbon fibre rod, curved for pelvis
Clamp, clip-on self-holding, MR-safe Aperture for rods 11 mm Schanz screw 5mm with lengths 125 – 200 mm All instruments must be enclosed in a Vario with
lid with an insert for Schanz Screws The instruments should have Combination
Wrench of diameter 11.0mm The instruments should have Socket Wrench of
diameter 11.0mm,cannulated The instruments should have Combination
Clamp, clip-on, self-holding, MR-safe The instruments should have Clamp, clip-on,
self-holding, MR-safe The instruments should have Universal Chuck
with T-Handle The instruments should have Adapter for
Seldrill™ Schanz Screw with diameter 5.0 mm The instruments should have Compressor, open
03 sets 1200.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 95 -
The instruments should have Short Trocar with diameter 3.5 mm
The instruments should have Long Trocar with diameter 3.5 mm
The instruments should have Handle for Drill Sleeve
The instruments should have Short Drill Sleeve 5.0/3.5
The instruments should have Long Drill Sleeve 5.0/3.5
The instruments should have Short Threaded Drill Sleeve 6.0/5.0
The instruments should have Long Threaded Drill Sleeve 6.0/5.0
The instruments should have Connecting Rod 5.0 mm, length 150 mm, Stainless Steel
12 Medium
External Fixator
Medium External Fixator Rod of dia 8 mm in
o Carbon fibre o lengths 120 – 320 mm
Clamp, clip-on self-holding, MR-safe Aperture for rods 8 mm Schanz screw 4mm & 5 mm with lengths 80 –
175 mm All instruments must be enclosed in a Vario with
lid with an insert for Schanz Screws The instruments should have Combination
Wrench with diameter 8.0 mm The instruments should have Wrench, hexagonal
with diameter 3.5 mm with T-Handle The instruments should have Combination
Clamp, medium, clip-on, self-holding, MR-safe The instruments should have Clamp, medium,
clip-on, self-holding, MR-safe The instruments should have Drill Sleeve 4.0/2.5
03 sets 1200.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 96 -
The instruments should have Adapter for Seldrill™ Schanz Screw diameter 4.0 mm
The instruments should have Adapter for Seldrill™ Schanz Screw diameter 5.0 mm
The instruments should have Universal Chuck, small, with T-Handle
The instruments should have Short Trocar with diameter 3.5 mm
The instruments should have Long Trocar with diameter 3.5 mm
The instruments should have Trocar with diameter 2.5 mm
The instruments should have Handle for Drill Sleeve
The instruments should have Short Drill Sleeve 5.0/3.5
The instruments should have Long Drill Sleeve 5.0/3.5
The instruments should have Short Threaded Drill Sleeve 6.0/5.0
The instruments should have Threaded Drill Sleeve 4.0
The instruments should have Long Threaded Drill Sleeve 6.0/5.0
13 Portable X-
Ray Machine
Portable X-Ray Machine Specification;--- MICROPROCESSOR BASED DIAGNOSTIC 50 mA X-RAY MACHINE with following features
X-RAY TUBE UNIT –Oil filled stationary anode X-ray tube unit with focal spot 2.2 mm x 2.2 mm
RADIOGRAPHIC OUTPUT – mA Max mAs KV 50 250 45-55 40 200 60-75
01 pc 5000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 97 -
30 150 80-85 KV SELECTOR – Select KV from 45 to 85 KV in
5 steps each SUPPLY VOLTAGE COMPENSATOR – Adjust
supply voltage from 180 v to 250 v automatically
LIGHT BEAM DIAPHRAGM Electronic DISPLAY – Digital display of mA ,
KVp & mAs OVERLOAD PROTECTOR IN BUILT mAs SELECTOR up to 250 mAs
Portable Stand ( can be dismantle Into smaller Parts)
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 98 -
SL. NO.
NAME OF EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
REQUIREMENTS /QTY(FOR ESI-PGIMSR, JOKA)
EMD VALUE
QUOTED
(YES/NO)
PHYSIOTHERAPY DEPARTMENT
1 T.E.N.S Therapy unit
T.E.N.S Therapy unit >with 4 channel. >Micro computer based model >Digital display >Separate display for each channel intensity &Timer. >Pulse for TENS International standard:1-200 Hz/sec >Pulse width International standard:50-200micro sec. >Output current 1 - 60 ma for each channel. >Should have preprogrammed indication menu >Must have real time current sensing system with auto output off during poor contact for patient safety. >Mounted with trolley with wheel for easy transfer. >Should have international safety standard with CE certified.
01pc 2000.00
2 Shortwave diathermy atleast 400 watt(micro processor controlled)
Shortwave diathermy atleast 400 watt(micro processor controlled) 1)High performance solid state generator with digital display. 2)High performance multi jointed arm 3)Continuous & pulsed mode(allows thermal & non thermal treatment) 4)Patient safety switch. 5)Must have CE certified. 6)Safety standard class 1
01 pc 8000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 99 -
7)Captive & inductive applicator. 8)Frequency 27.12 Mhz 9)Must have disc electrode with adjustable arm. 10)Pad electrodes for larger ,smaller & irregular surface area(small sinus electrode preferable) 11)Strap & other standard accessory preferable(knee jt,low back, upper back.)
Gymnasium Equipments
3 Suspension frame
Suspension frame with bed and all accessories
01pc 1000.00
4 Multi gym or multi exerciser therapy unit
Multi gym or multi exerciser therapy unit
01pc 2000.00
5 Quadriceps exercise table
Quadriceps exercise table with quadriceps hamstring torsion arm. Foam padded table & torque unit with two lever arm, Adjustable resistance.
01pc 1000.00
6 Parallel bar adult
Parallel bar adult (height adjustable) 01pc 1000.00
7 Static cycle
Static cycle >Dual shock absorber. >Adjustable tension. >Digital meter showing- Distance, speed,& calorie.
01pc 200.00
8 Complex exerciser unit
Complex exerciser unit should have suitable for shoulder elbow chest abdomen and lower limb exercise should be gradeable and adjustable for resistance foam padded table top on tubular frame the unit should be dimension 185-195 X 70-80 cm wide and the height should be 80 -85 cm complete unit consist of one table pan assembly and following attachement - ankle, hip,
01pc 2000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 100 -
wrist,knee,abdominal and back exerciser it should include strap, harness,and over head pulley systems different iron weight plates starting from 0.25 kg and 1 kg total upto 30 kg pelvic rest 1 quadriceps rest 1 supination pronation wheel 1 wooden cabinet for storage
Physical Fitness Equipments
9 Treadmill Treadmill - >Motorized at least 125 kg capacity, >AC motor : capacity >_2.0 H.P (peak>_4.0 H.P) >speed 1-18 kph, >Incline 0-16%, >convenient hand controlled speed &incline. >Quick speed, quick incline. >Easy incline, 5 program upland running. >Diverse speed & incliner program. >Self stop.
01pc 2000.00
OCCUPATIONAL THERAPY
10 Fluidotherapy
Fluidotherapy it should be used for double extrimity simaltaneously operated in pulse or continious mode treatment time adustable adustable air speed machine should mounted with wheel or trolley safety standard class 1 digital display should have dry heat media (cellulose particles) with the machine as accessories
01pc 1000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 101 -
For hand exercise & rehabilitation
11 Finger Goniometer
Finger Goniometer 01pc 500.00
12 Goniometer Goniometer 01pc 500.00 13 Peg board Peg board 01pc 500.00
14 Wrist circumductor
Wrist circumductor 01pc 500.00
15 Grip exerciser Grip exerciser 01pc 500.00 16 Finger
exerciser Table
Finger exerciser Table 01pc 500.00
17 Finger dexterity board
Finger dexterity board 01pc 500.00
18 Hand Gym kit board
Hand Gym kit board 01pc 500.00
General exercise items
19 Over head pulley
Over head pulley 01pc 500.00
20 Inclined sanding board
Inclined sanding board 01pc 500.00
21 Horizontal sanding board
Horizontal sanding board 01pc 500.00
22 Shoulder wheel
Shoulder wheel 01pc 500.00
23 Balance board
Balance board 01pc 500.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 102 -
24 Foot placement ladder
Foot placement ladder 01pc 500.00
25 Bolster set Bolster set 01pc 500.00 26 Wedge board
set Wedge board set
01pc 500.00
27 Quadriceps table
Quadriceps table 01pc 500.00
28 Stand in frame
Stand in frame 01pc 500.00
29 Trampoline Trampoline 01pc 500.00
30 ADL training kit
ADL training kit 01pc 500.00
31 Low rise exercise platform
Low rise exercise platform 01pc 500.00
32 Cp prone stander
Cp prone stander 01pc 500.00
33 Cp chair Cp chair 01pc 500.00
34 Wheel chair for transfer training
Wheel chair for transfer training
01pc 500.00
35 Multiple gym exerciser
Multiple gym exerciser 01pc 500.00
Department of Orthopaedic (ESI Hospital , Manicktala)
1 DIGITAL ELECTRONIC TOURNIQU
Cuff pressure range: 10 to 450mmHg. Pressure regulation: +/- 10mmHG of
2 sets 4000
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 103 -
ET:-
set point. Online Setting: Increase and decrease
in pressure settings Timer: Timer range from 9hours to
59minutes. Internal least count: Timer
1minute/Internal 1/1000 second. Alarm & Display Indication:- When set pressure is over When pressure goes 25mmHg above set
pressure. When pressure goes 25mmHg below set
pressure. In battery mode, when battery voltage
reaches 9V. Memory: Pressure set in earlier session
is stored and displayed, when machine is switched on again.
Pressure Table: Maintains set pressure under leak condition.
Backup: 3hours battery backup. (on full charge)
Switch over: Automatic switch over from offline to online (vise versa).
Power: 230V(AC)/50Hz ± 10% (Voltage fluctuations from 180-270).
Stabilizer: Inbuilt.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 104 -
Cuffs: Different Sizes of five cuffs—washable & easy fitting (Paediatric, small, medium, big & large).
Digital Display: Digital Display of time elapsed, set time, actual and set pressure.
2 Titanium Elastic Nails
instrument set
Titanium Elastic Nails
The nail should be available in diameters – 2.0, 2.5, 3.0, 3.5 and 4.0 and length 440mm to cover all indications
The nail tip should be designed in such a way that the insertion is easy and the nail glides along medullary canal.
The design of the nail should allow fracture reduction and facilitate nail manipulation.
The implant should be available in titanium alloy (Ti-6AI-7Nb) that gives mechanical stability and elastic property.
The implant should have markings that allow direct rotational control of the nail tip in the medullary canal to reduce exposure to image intensifier
Titanium Elastic Nail set
The system should have a double drill Sleeve 4.5/3.2
The system should have a Drill Bit, 2.7mm dia., L 125/100mm 3-flute, for quick coupling
The system should have a Drill Bit, 3.2mm dia., L 195/170mm 3-flute, for quick coupling
The system should have a Drill Bit, 4.5mm dia., L 195/170mm 3-flute, for quick coupling
The system should have a Pin Wrench, 4.5mm, L 120mm
01 set
20,000
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 105 -
The system should have a Spanner Wrench for nos. 357.180/357.181
The system should have a Slotted Hammer 400g, detachable
The system should have a Locking Pliers that is flat nosed for TEN
The system should have a straight impactor and a bevelled impactor
The system should have an F-Tool The system should have an Awl that is curved and
has a sharp tip. The system should have an Extraction Pliers with
thread for TEN The system should have a Cutting Pliers for TEN The system should have a Hammer Guide The system should have an Inserter The system should have a SYNCASE Silicone Mat
170 x 460 mm The system should have a Lid for no. 675.420 The system should have a Tray, bottom, for
Instruments for 675.420 The system should have a Tray, middle, for
Instruments for 675.420 The system should have a Tray, top, for Implants
for no. 675.420 The system should have a SYNCASE Basic Tray,
height 145mm, neutral The system should have a Transport Case for
Syncase 3 Collinear
Reduction Clamp
The system should have a collinear reduction clamp with sliding mechanism that accepts four different attachment arms which can be mounted in four different positions using the mounting notches to accommodate various fracture types.
01 set 10,000
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 106 -
The cannulated feed rod of collinear reduction clamp should have a cannulation of ø 3 mm for temporary K wire fixation and a trigger for continuous and variable force application.
The reduction clamp should have a release button for adjustment of the attachment arm and release lever for the adjustment of the feed rod.
The system should have a reduction attachment for reduction against LCP plates for both large and small fragment plates which can be mounted on the tip of feed rod.
The system should also have a reduction attachment for reduction against LCP/ LC - DCP plates and for reduction against the bone which can be mounted on the tip of feed rod.
The system should have a combination wrench of Ø 8.0 mm for mounting the reduction attachments
The collinear reduction clamp should have various attachment arms which give a reduction tool according to different clinical needs - Hohmann shaped arm; Pelvic Arm; Percutaneous Arm, Bone Hook Shape arm.
4 PULSE LAVAGE SYSTEM
1. Irrigation pressure electronically
controlled.
02 sets
2000
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 107 -
2. Autoclavable & reusable tubes of medical grade silicon.
3. Complete Sterility is maintained. 4. Easy loading of the tube in the machine. 5. Efficient peristaltic pump. 6. Water Resistance Display. 7. Foot control operate machine. 8. Pre Set features. 9. Four types of irrigation possible. 10. Inbuilt fuse and voltage control rectifier. 11. Power Supply 230 V AC 50 Hz ± 10% 12. Stainless Steel Body
Department of Pathology & Central Research Laboratory (for ESI PGIMSR, Manicktala) 1 CRYOSTAT CRYOSTAT
1. Freely standing cryostat with chamber temperature
down to -35°C. Actively cooled quick freeze shelf with optional 2 station Peltier unit for freezing down to -40°C with Specimen storage shelf to store up to 8 chucks.
2. Maintenance free microtome with section thickness
setting preferably from 1 to 100 µm. 3. Equipment must be suitable for sectioning of
specimen having diameter at least up to 50 mm & facility of Specimen orientation must be provided.
4. Vertical Specimen Stroke length: 56 mm or above,
Horizontal Specimen feed: Approx. 25 mm
5. Provision must be available for Motorized (preferably at 600 μm/s &900 μm/s. – as rapid & slow respectively) coarse feed . Machine should have the Trimming facility via motorized coarse feed.
01 pc
40000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 108 -
6. Blade holder system to hold both high profile & low profile blade preferably simultaneously. Disposable Blade holder system must be provided with lateral displacement and integrated glass anti-roll guide.
7. Should have facility for UV disinfection.
8. Preferably have Ag Protect nanosilver coating.
9. Electronic locking key to avoid any inadvertent changes in program setting & closed drainage system to allow control disposal of fluids
10. Automatic hot gas defrost, 1 automatic defrost cycle/24 hours, selectable time .
11. Specimen retraction : 20 μm
12. Specimen orientation : X‐Y axis 8 deg and Z axis 360 deg
13. Instrument should be supplied with disposable
blade holder for high and low profile blades, disposable blades (high profile and low profile), Specimen chucks, Brushes, Oil etc.
14. A 2 K.V.A online UPS also to be supplied with the instrument for at least 30 min standard backup.
2 SEMI-MOTORIZED ROTARY MICROTOME
SEMI-MOTORIZED ROTARY MICROTOME 1. Precision specimen orientation system with clear
zero reference point. 2. Force balancing system should be available for
effortless and uniform hand wheel rotation. 3. Section thickness setting from 0.5 to 100 μm, with
02 pcs
60000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 109 -
a provision of step-by-step increment. 4. Specimen feed of appx. 28 mm or above and
vertical stroke length of 70 mm. 5. Trimming section thickness setting range: 5 – 500
μm with a provision of step-by-step increment 6. Precise specimen orientation of 8° in horizontal
and vertical direction. 7. Coarse feed : motorized with variable speeds. 8. Knife holder base with lateral displacement
facility for utilization of the entire Blade edge with clearance angle indication
9. Hand wheel lockable at any position with
additional 12’O’clock locking by simply pulling the handle
10. Slot cover to protect the interior of the instrument from sectioning debris.
11. specimen size: 50 X 55 mm
12. Section waste tray must be provided.
13. Section thickness indication-visual display.
14. System should be equipped with both High profile & Low profile disposable blade holder.
15. 5 packet of each blade (High profile & Low profile)
to be supplied with the instrument.
16. 2 K.V.A UPS also to be supplied with the instrument for standard 30 min back‐up.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 110 -
17. It should be CE/ISO certified .
3 FULLY AUTOMATED SLIDE PREPARATION SYSTEM
FULLY AUTOMATED SLIDE PREPARATION SYSTEM
1. The system must be walk away fully Automated
Slide Preparation system to process slides for Immuno Histo Chemistry, In Situ Hybridization, Silver In Situ Hybridization ,Immuno Fluroscence and should be able to process IHC with IVD approved p16 antibody for the stage detection of cervical cancer.
2. There should be options for varying temperature and incubation time.
3. The system must be fully automated to do baking, deparaffinization, antigen retrieval and staining within the same system .
4. The System should be open for Primary antibodies.
5. The system should be able to generate fully prepared 60 IHC Slides in a 9-10 hour shift.
6. The system must have individual Slide heaters for all the slide positions,slide temperature should be individually controlled.
7. The system should have a mechanism which will
be able to control evaporation and protect tissue integrity on each slides.
8. The reagents and the antibody should get mixed
01 pc
48000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 111 -
through air whirlpool and no mechanical part should be involved for mixing the reagents and antibodies.
9. Only 100 micro litre of Primary antibody must be required for all types of slides irrespective of the size of the tissue section.
10. There should be free supply of reagents, buffer s and DAB for the first 200 Slides.
11. The system should be able to recognize Slide Specific Barcode label which would provide automatic programming, patient and case identification.
12. The system should be US FDA certified.
13. Online UPS must be provided with minimum one hour back.
14. The system should have compatible computer
and software of latest technology available during installation. The software should be upgradable.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 112 -
4 Real-Time
PCR Real-Time PCR:
1. The Real time PCR System must have International and/or National
quality and safety certification, e.g. CE and/or UL/cUL and/or ISI certified and /or IVD certified.
2. The Real time PCR System should have an open platform system, and must
have provisions for using third party kits and reagents for the molecular diagnosis of infectious diseases
3. Ready to use DNA and RNA master mixes should be available
4. The Real time PCR System must at least have the following In vitro Diagnostics approved kits available from the same manufacturer which are pre-validated on the quoted model :
Human Immunodeficiency virus Hepatitis B virus Hepatitis C virus Cytomegalo virus Epstein Barr virus Herpes Simplex virus
5. There should be provision for using the system as simple Thermocycler for qualitative molecular detection of infectious diseases.
6. System should be capable of running two different assays simultaneously in a
single run. 7. System should be able to run both standard mode PCR as also FAST mode runs.
8. The Automated Real time PCR System should be accompanied with a desktop or
laptop computer and printer system (required for the functioning and data storage and printing of reports) with original operating system and free software support for the lifetime of the machine. Systems should be supplied with latest Pentium computer with color monitor and printer. It should have an interface to laboratory host computer. System software should be based on Windows XP and validated for IVD application.
01 pc
48000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 113 -
9. Remote data monitoring via connected/networked PC and download data
10. The Automated Real time PCR System should have already been installed in at least two (02) reputed Academic and / or Medical institutions and / or reputed accredited diagnostic laboratories in the Eastern region of India.
11. Thermal Cycler Mechanism:- Peltier based heating and cooling mechanism for maximum uniformity with even heating and cooling, with temperature accuracy of ±0.5°C and temperature uniformity of ±1°C.
12. Calibrated dyes set on installation:- FAM/SYBR Green, VIC/JOE, NED/TAMRA/Cy3, ROX/Texas Red, Cy5. Calibration for new dyes within the wavelength range should be possible by following the custom dye calibration procedure in the User’s Manual without purchase of additional filter sets.
13. Sample Layout:- Should be flexible for the tube input volumes having capability of running 96 or more samples.
14. Any additional step of centrifugation of tubes while performing the assay
should NOT be there.
15. Should come with standard chemistries for gene expression, quantification, mutation scanning, allelic discrimination, genotyping and methylation studies. System should be able to add a melt curve during a run if required. Instrument should be able to distinguish between 5,000-10,000 DNA genome equivalents (a two-fold difference in copy number) with confidence level up to 99.7%.
16. Temperature range should be from 4°C - 98°C with a ramp rate of 1.2°C / sec and a ramp rate of 3.6ºC for FAST run. Peak block heating rate of 5.5°C.
17. Halogen lamp source with 5 different wavelengths with minimum cross-talks. The assay should not be based on one single wavelength of light. Should be able to detect all wells equally with same optical path length. Should maintain iso-optical detection in all wells for maximum uniformity with CCD camera.
18. System should be 5 color & capable for multiplexing. Should have 5 excitation filters and 5 emission filters to cover wide chemistries. Each sample in each well should be monitored with dedicated fiber optic bundle to have improved sensitivity for fluorescence measurement and to avoid cross talk.
19. Reaction Volume 5 μl-30 μl
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 114 -
20. Should NOT require any passive reference dye
21. System should use close tube process to avoid any cross contamination.
22. Software: Unlimited user Software license with maximum feature should come absolutely free of cost for the life of the machine, with additional features of creation of customer genotyping, DNA quantification, gene expression, and pathogen detection assays, resulting in creating template files that can easily be saved and used to run assays that require set protocols.
5 MINI VERTICAL GEL SYSTEM
MINI VERTICAL GEL SYSTEM
1. Gel Size should be minimum 8.3 x7.3 cm (W x L)
2. Glass Plate Size minimum dimension should be
Inner - 10.1 x 7.3 cm
Outer - 10.1 x 8.2 cm
3. Should be IEC 1010/ CE Certified.
4. Same system should be able to perform western blotting, 2D/tube gel electrophoresis & electro elution also.
5. No. of wells: 10, thickness: 1.0 mm
6. The system should accommodate upto 4 handcast or precast gels at a time.
7. Typical run time should be less than an hour
8. Buffer volume: Less than 200 ml for each of the chambers
9. Should come with the facility to run 4 gels together with companion running module.
01 pc
4000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 115 -
10. Buffer volume : 700 ml for 2 gels and 1000 ml for 4 gels.
11. Same System Should be compatible with electroelution and western blotting in the same tank
12. Should come with consumables for at least 100 reactions.
13. POWER SUPPLY:-
• Voltage Output range (programmable): 5-250 V, fully adjustable in 1 V increments;
• Current Output range (programmable): 0.01 to 3.0 A, fully adjustable in 0.01 A increments
• Power output range (programmable): 1-300 W, fully adjustable in 1 W increments
Output Type: Constant voltage, Current or Power with automatic
crossover
Output terminals: 4 pair recessed banana jacks in parallel
Pause / resume function should be available.
2-line, 16 character backlit LCD is preferred.
Add-on safety features like “No-load” detection, rapid resistance change detection, ground leak detection;
overload / short-circuit detection; overvoltage protection; over-temperature protection are must. The system should comply with EN61010 or equivalent safety compliance.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 116 -
Input protection: Fuse on hot and neutral.
6 SEMIDRY TRANSBLOT SYSTEM FOR WESTERN BLOTTING
SEMIDRY TRANSBLOT SYSTEM FOR WESTERN BLOTTING
• The system should allow fast, efficient and economical blotting without buffer tank or gel cassettes.
• Spring mounted platinum coated titanium anode and
stainless steel cathode plate electrode to provide consistency and reproducibility in results, durability and extended life-span of the equipment.
• Maximum Gel Size should be 24 cm x 16 cm
• The system should be capable of transferring multiple gels
simultaneously.
• Current requirement should be upto 3000mA.
• Special agarose gel support frame for performing southern blotting in the same system as an add-on facility would be preferred.
• Should come with consumables for atleast 100 runs Power pack should have maximum output: 250V, 3.0A, 300W with the programmable facility for each parameters are as follows.
• Voltage Output range (programmable): 5-250 V, fully adjustable in 1 V increments;
• Current Output range (programmable): 0.01 to 3.0 A, fully
adjustable in 0.01 A increments
• Power Output range (programmable): 1-300 W, fully
1 pc
8000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 117 -
adjustable in 1 W increments
Output Type: Constant voltage, Current or Power with automatic crossover
Output terminals: 4 pair recessed banana jacks in parallel
Timer: up to 99 hr, 59 min
Pause / resume function should be available.
2-line, 16 character backlit LCD is preferred.
Add-on safety features like “No-load” detection, rapid resistance
change detection, ground leak detection; overload / short- circuit detection; overvoltage protection; over-temperature protection
are must.
The system should comply with EN61010 or equivalent safety compliance.
Input protection: Fuse on hot and neutral.
7 Fast
blotting
system
Fast blotting system
1. Fast blotting system for blotting four gels simultaneously
2. Should have USB ports for filmware transfer
3. System should have a cooling fan
4. should have inbult power pack supply
5. should have user interface
6. should have an audible alarm
01 pc
4000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 118 -
7. should have user notification with following features
power fail during run
no load detection
no cassette detection
end of run
8. should have user defined programmable methods minimum 25
8 ELECTROPORATOR
ELECTROPORATOR
1. Electroporator system with the capability to electroporate eukaryotic cells, prokaryotic cells (bacteria), yeasts and other microorganisms.
2. Instrument should have features for adjusting voltage & pulse length
3. Pulse Voltage range : 10-3,000 V
4. Should include all accessories for electroporation
5. It should also have required software, pre-set optimized programmes and other accessories
01 pc
16000.00
9 MILLI Q WATER PURIFICATION SYSTEM
MILLI Q WATER PURIFICATION SYSTEM The complete water purification system should comprise of two stages as below: Stage I Stage 1 of the system must comprise of the following:-
01 pc
20000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 119 -
The tap water supply generally has a particulate reading of 1200 ppb. A suitable pre-filtration system for bringing the concentration from 1200 ppb to 100 ppb before use with the R.O. System should be provided. RO water system with a dispensing rate of 1 Liter per minute or better and large cartridges of over 20 inches each for a long life. The removal efficiency of the RO water system should be as follows:- Suspended solids- 100%, Bacteria - 99.5%, Viruses -99.5%, Pyrogens - 99.5%, Organic, molecular weight >250 daltons - 97-99.5%, Monovalent inorganics - 94-96%, Divalent Inorganics - 96-98%, Trivalent Inorganics- 98-99%. The water quality should be suitable enough for general microbiology, general immunology and other activities such as glassware washing, deionization systems, glassware rinsing, buffer solution preparation, standard solution preparation etc. 2 extra prefilter, carbon filters ( total 3 each) to be included. Storage tank of around 15 -20 Liter at outlet of RO. System should include automatic flush valve, which extends RO membrane life: It should automatically initiate the purification process by flushing the RO membrane and tank for three minutes after each 12 hour period of inactivity. STAGE II For Ultra pure water Water quality must be good enough for Inorganic analysis: Ion chromatography, Inductively coupled plasma/mass spectroscopy, Atomic absorption, flame emission spectroscopy, trace metal analysis, Organic analysis such as Liquid chromatography, HPLC, Gas chromatography, Electrophoresis, Total organic carbon, Tissue culture, Clinical, General Microbiology, General Immunology, Recombinant DNA etc. Purification technique used / filters included to be as follows :- Carbon filtration, De-ionization - 2 no’s of polishing grade mixed bed, Organic adsorption cartridge, Ultrafiltration 0.1 micron, Ultraviolet reactor ( with dual wave length of 185 & 254 nm), hollow fiber filter (optional). Smart independent dispensing system (Dispensing Gun) for low volumes of ultra pure water. In line pressure regulator. Dispensing flow: 1.5 - 2 L /minute of Type I or
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 120 -
1 L/ m with hollow fiber filter Extra membranes to be included within the offer: Pre-filters and Carbon Filters for RO system :- 18 No.’s each R.O. : 2 No.’s Polishing Station / Ultrapure Station : 2 Sets each complete. All items necessary to operate equipments must be quoted.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 121 -
10 LIQUID
NITROGEN VAPOUR STORAGE SYSTEM
LIQUID NITROGEN VAPOUR STORAGE SYSTEM
1. Liquid Nitrogen (LN2) storage system for long term preservation of Frozen samples in 100% vapor phase at -190 degrees Centigrade with no contact of sample with lLN2
2. Should be jacketed model
3. Capacity for at least 30 litres of LN2 in outer jacket
4. Minimal interior temperature gradient from bottom of
Chamber to below the lid
5. LN2 level indicator and safety relief valve should be present
Minimum 8000 of 2ml cryovial storage capacity in racks and boxes (all racks and cryoboxes should also be provided with 1 set spare rack and its set of boxes)
6. LN2 system should be safely mounted on castors for easy and safe mobility when when loaded
7. Automated real time display monitor below the lid
8. Automatic filling and control of LN2 level
9. Alarms for deviations from set values of level and
temperatures
10. Self diagnosis at start up
11. Program lock to prevent unauthorized intervention
12. Should have temperature log software for
01 pc 4000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 122 -
monitoring the parameters continuously and its history
13. Liquid Nitrogen Cylinders (2 in number) to connect
to the storage vessel in order to automatically re-fill LN2 in the storage vessel as and when required. Capacity of Cylinders to be minimum 200 litres each, 22 PSI liquid delivery, equipped with LN2 level and pressure gauges and safety relief valve and mounted and restrained on castors for easy mobility.
14. Should be connected through Y connection: 1, LN2
transfer hoses 03.
15. Should have inventory system for 2 ml cryovials
16. Racks should have locking system to prevent fall out of sample storage boxes
17. Should provide 2 sets of LN2 safe cryogloves IQ/OQ/PQ validation documents should be provided
11 BIOSAFETY
CABINET( Class II type B2)
BIOSAFETY CABINET( Class II type B2)
1. Biosafety cabinet Class II type B2 with 100% exhaust for cell and tissue culture work.
2. Compliant with standard norms for biological safety, air quality, filtration and electrical safety.
3. Should allow working with agents assigned as BSL – 1& 2.
4. 4 feet wide with internal working area of at least 6 square feet.
5. Programmable microprocessor controlled operation.
6. Single piece stainless steel working tray without
welded joints to collect contamination or rust.
01 pc
10000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 123 -
7. Robust dual wall cabinet construction with negative pressure plenums around the work zone.
8. High performance, long life fan systems
(HEPA/ULPA) with efficiency of air filter >99.9%. 9. Average airflow: Inflow – 100fpm or higher,
Downflow – 60fpm or higher
10. Low noise level (<60dBA) and vibration free.
11. Adequately illuminated work zone with provision of UV light for decontamination.
12. Digital display for Air flow, UV, etc with timer
function for UV light. 13. Front window/sash should be made of non-
reflecting, laminated safety glass.
14. Should be provided with electrical outlet, water/media and gas inlet.
15. Should have supporting stand with wheels, foot-rest and adjustable lab chair
12 CO2
INCUBATOR
CO2 INCUBATOR
1. System : A system with access port and reversible doors, Alarm for CO2 level and temperature and rounded corners in Inner chambers
2. Contamination control : Preferably by Copper mixed alloy interior chamber with UV light / HEPA Air filter
3. Capacity : 160-225 litres
4. Model/Body : Low profile, stackable
5. Temp. Range : RT + 5ºC to 50ºC
01 pc
12000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 124 -
6. Temp. Uniformity : ± 0.3ºC or lesser
7. Temp. Control : ± 0.1ºC or better using
microprocessor based accuracy technology with digital display
8. Humidity : 95% ± 5% RH
9. CO2 Range : 0-20% with accuracy of ±0.2% or
better
10. CO2 Sensor : Infra-red based sensor
11. No. of Shelves : 4 or more 12. Other Feature : The system should have
International QC certification and be supplied with CO2 cylinder
13 SONICATOR
SONICATOR
1. Model should be probe based, compact, benchtop
size, programmable and suitable for cell disruption and homogenization.
2. Power rating 500W or higher with working frequency of 20-25 kHz.
3. Piezoelectic based converter with required
converter cable.
4. Amplitude setting range 20% to 100% or better.
5. Programmable timer with adjustable pulse sonication.
6. Efficiency 90% or higher.
01 pc
10000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 125 -
7. Supplied with standard probe (with replaceable
tip) along with additional probes for sample volume 0.2ml to 250ml.
8. Digital display for monitoring parameters like
wattage, amplitude and energy.
9. Jack stand, mounting system and sound proof box included.
10. Inbuilt overload protection.
11. Lead free and ROHS compliant.
14 SHAKER INCUBATOR (Refrigerated)
SHAKER INCUBATOR (Refrigerated) 1. Model : Refrigerated table top shaker with
provision of stationary tray for incubation of petridish/ culture plates and clamp sets for flask of different sizes (100ml to 2 litre)
2. Body : Exterior : Made of steel Interior : Made of stainless steel
3. Temperature range : 10ºC - 75ºC or better
4. Temperature accuracy : ± 0.5ºC
5. Shaking Amplitude : 25mm/ 30-350 rpm with ± 2%
deviation
6. Tray size : 40 cm X 40 cm or bigger
7. Other features : Accurate PID control for temperature reliability.
8. Timer and alarm for speed and temperature.
01 pc
6000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 126 -
9. Fluorescent lighting and UV for decontamination.
10. Safety device for overload and overheating protection
15 MIXER FOR MOLECULAR ANALYSIS AT VARIED TEMPERATURE
MIXER FOR MOLECULAR ANALYSIS AT VARIED TEMPERATURE
Bench top model with small footprint with heating, cooling and mixing functions Facility for interchangeable block (with automatic block recognition feature) to accommodate plates and tubes ranging from 0.2ml to 50ml, Touch keypad with digital display of time, temperature and mixing speed, All three parameters to be freely programmable.
Mixing: circular with anti-spill technology for efficient mixing without wetting and contamination in tubes and plates and mixing frequency up to 30000 rpm.
Temperature: Peltier based system, temperature
range from 150C below ambient to 1000C accuracy of ±0.50C at 20-450C, heating rate of at least 60C/minute and cooling rate of 2.50C/minute.
Heated lid to prevent condensation on lid and sides
of the tube.
01 pc 16000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 127 -
To be supplied with block for 24x1.5ml Micro
Centrifuge tube. 16 AUTOMATED
NUCLEIC ACID
WORKSTATION/NA
PURIFICATION SYSTEM
AUTOMATED NUCLEIC ACID WORKSTATION/NA PURIFICATION SYSTEM
• Should be a complete compact automated
nucleic acid isolation/purification workstation.
• Should be able to process 8 samples at a
time.
• Sample volume 100-1000µl
• Elution volume 50-200µl
• Should able to process broad variety of samples types including
whole blood, blood cells, plasma, fresh or FFPE tissue, body fluids, cultured cells, bacteria, clinical sample. (Should free from cross-contamination &can be used for PCR/RT PCR reaction.)
• Run time should be 20-25 minute or less
according to batch size.
• Should be based on Magnetic bead technology for isolation of Nucleic acid. (DNA/RNA/TNA)
• There should not be use of any manual steps
& no other external device like vacuum pump or tubing/pumps are required.
01 pc 44000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 128 -
• Should have preinstalled protocols & no
external program cards are allowed.
• Should have integrated HEPA filter, UV decontamination for less
cross contamination as well as bar code scanning facility for easy sample tracing including tip loss & clot detection.
• Should be provided with starter Nucleic acid
(DNA/RNA) purification/isolation kit.
• All international certificates including CE, CB & original software license should be provided.
• Power supply 100-240 vac + /-
10%50/60HZ+/-5% 17 VERTICAL -
80°C FREEZER
VERTICAL -80°C FREEZER
1. Temperature range -50°C to -86°C and adjustable with a setting accuracy of +1°C
2. Internal capacity should be minimum 400 litres and should accommodate 15 racks, 240 boxes of 2” height to keep 24000 nos. 2ml vials at least
3. Powder coated solid outer cabinet to prevent corrosion
4. Inner cabinet should be made of oxidation free, rust free and scratch less stainless steel
5. Should have 5 chambers with 4 height adjustable shelves, each chamber should have individual inner door to prevent cold loss
6. Full racks and boxes should be quoted 7. Must maintain -86C° even at ambient temperature of
32°C 8. Pull down time should be < 5 hrs
01 pc
48000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 129 -
9. Microprocessor control for operation with integrated audio visual temperature alarm function with digital monitoring display.
10. Must have auto restart function after power failure with non-volatile memory
11. Should have automatic reset function to protect the microprocessor controller from damage by electrical spikes
12. Battery back for display and alarm during power cut. 13. Should provide electronic chart recorder system
with integrated alarm and auto-dialer facility. By this, user should be able to access data anytime from anywhere using internet, it should to warn the user about the freezer malfunction through phone and email notification. Historic data recording i.e graph should be viewed by hours, days or months with atleast three months data displayed at one time
14. Heavy duty hermetically sealed two stage compressor ( 4x¾HP) to maintain inner temperature below -86°C
15. Refrigerant should be CFC free 16. Should have space saving foot print (WxD): 80 x 86
cm 17. Should have diagnostic software for fault condition. 18. Should provide C02 back up system with all
necessary set ups i.e CO2 cylinder etc
19. Should have heated air vent to ease the door open during vacuum formation within the chamber
20. Power consumption should be < 8.5kWh/day 21. One fan circulation to lower the noise and power
consumption 22. Insulation should be of 130mm thick with
combination vacuum insulation panel and polyurethane foam. Vacuum insulation should have metal coated polymer film barrier seal to maintain vacuum strongly.
23. Should have lockable castors for free and easy mobility
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 130 -
24. To be operational on 220 to 240 Volts at 50 Hz. Single phase
25. Should have CE and UL certification 26. Should be supplied with compatible voltage
stabilizer 18 Binocular
LED Microscope
Binocular LED Microscope
1. Microscope should have Infinity Corrected Optical system for Bright field applications.
2. Microscope should have right hand stage Stand with 4 positions Nosepiece, Universal Power Supply, Mechanical stage with non-extending rack and slide holder, Long life LED Illumination with Auto off facility, built in handle and cord wrap. Dust cover, Manual.
3. Binocular tube with 30° inclination for easy viewing.
4. Magnification from 40X to 1000X with 10 X eyepieces with Objectives of 4x,10x,40x & 100x (OIL)
5. FOV should be 20mm 6. IPD should range from 52mm – 75mm 7. Abbe Condenser 0.9A dry with relevant sliders. 8. Should have integrated vertical handle for easy
carrying & easy lifting with integrated cord wrap to eliminate damage to microscope components.
9. Slide holder should be student friendly to avoid slide chipping.
10. Should have transmitted LED illumination of 6000K temp., 25,000hrs. life at full intensity-providing cool white light with a lifetime of at least 20 years for cost saving
11. Stage should maintain its dimension with round edges eliminating chance of injury with additional protection from friction damage.
12. Preferably AgTreat (anti microbial) to be incorporated for eliminating growth of bacteria
10 pcs
60000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 131 -
13. Should have time delay shut off automatically to save energy with disabled & enabled option also.
19 PLATELET
FUNCTION
ANALYSER
PLATELET FUNCTION ANALYSER
1. Must be suitable for Simple, rapid and precise assessment of platelet function
2. Accurate detection of inherited, acquired or induced platelet dysfunction
3. Detect vWD 4. Detect platelet P2Y12 receptor blockades in
patient undergoing therapy with P2Y12 receptor antagonist
5. Start up reagent and cartridge for 100 tests 6.Test system Principle: High-shear force dynamic flow system • Measuring channel: Single measuring channel • Incubation category: Two incubation wells • Incubation temperature: 37.9 °C ± 1.0 °C • Incubation warm-up time: < 15 minutes (room to operating temperature) • Trigger solution: Illuminated trigger solution viewing area 7. Sample Handling • Type of sample: Citrated whole blood • Sample mechanism: Manual pipette dispensing (800 μL) • Barcode identification: external barcode reader for sample identification 8. Reagent Handling • Type: Single disposable self-contained test cartridges • Reagent recognition: Positive optical coding reagent cartridge identification
01 pc
44000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 132 -
• Additional reagent: Trigger solution 9. Throughput • Single test: P2Y, Col/EPI, or Col/ADP: 6 tests/hour • Duplicate test: Col/EPI or Col/ADP: 10 tests/hour 10.Software • Interface: Color LCD touchscreen • Host connection: Unidirectional, external RS-232 DB-9 port or ethernet network • Stored patient results, control results, and maintenance events: Last 1,000 results • USB port: Software updates, printer, barcode scanner,and result export • Quality control: Built in • Onboard help • Instrumentation status: Clear status messages (red, yellow, and green) 11. Power Supply • Operating voltage: 100 – 240 VAC • Main frequency: 50 – 60 Hz • Current (maximum): 1.38 A @ 90 VAC 12.Environmental Conditions • Operating temperature: 18 °C – 29 °C • Non-operating storage: -29 °C – 50 °C • Relative humidity: 20 – 90 % • Operating humidity: 20 – 90 % RH (non-condensing) • Non-operating storage humidity: 0 – 95 % RH (non-condensing) • Degree of protection: according to IEC 60529 • Heat emission: 94 kcal/h (375 BTU/h) 13. Online UPS with 30 minutes backup
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 133 -
20 BLOCK
CABINET
BLOCK CABINET
1) Made of CRC sheet duly powder coated.
2) Should have index card holder and handle
for each drawer.
3) Should be provided with lock and key
4)Capacity 20000 blocks
02 pc 16000.00
21 SLIDE
CABINET
SLIDE CABINET
1) For placing slides in horizontal manner
2) For safe and easy handling of 75 × 25 mm
slides.
3) Made of mild steel sheet.
4) Well designed for performance and
durability.
5) Powder coated paint outer finish with
smoothly working doors fitted with handle,
lock and key.
6) The anodized aluminium slide strays for
holding 75 × 25 mm slides, have been
arranged separately so as not to disturb
other compartments while taking out or
putting in the slides.
7) The size of the tray approx 350 × 210 × 35
mm and nicely fitted with uniformly slotted
aluminium carrier each holding slides in
horizontal position.
8) Fitted with index card holder.
9) Capacity 20000 slides.
02 pc 8000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 134 -
22 UV
Sterilization cabinet
UV Sterilization cabinet
1. Destroys unwanted PCR products in less than 30 minutes
2. Built in timer control 3. Protects the sample from user
contamination 4. Protects the user from Biohazard samples 5. Four powerful, timer controlled UV tubes,
combined with optimal reflectors, provide efficient irradiation of the complete work surface
6. Doors equipped with safety cutouts 7. To be provided with safety trays and easy
to clean tray liners 8. Safety interlocks on the cabinet doors
prevents the user from any exposure to the
UV light 9. To be provided with required accessories such
as height adjustable stool, etc
01 pc 3000.00
23 Micro Centrifuge for 0.2ml PCR
tubes
Micro Centrifuge for 0.2ml PCR tubes
1. Quiet and reliable. 2. Small foot print. 3. Independent on/off switch 4. 2 place rotor for 8x0.2 ml tubes 5. 6 place rotor for 1.5ml tubes 6. Fixed speed of 6000rpm/2000g
04 pcs
32000.00
24 Micro Centrifuge for 1.5
ml/0.5ml PCR
Micro Centrifuge for 1.5 ml/0.5ml PCR Tubes
1. Quiet and Reliable 2. Small foot print
3. Built in power supply
03pcs
24000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 135 -
Tubes
4. Digital display of time and speed
5. Standard 6 place rotor for 1.5 ml tubes
6. Spare 12 places rotor for 0.5 ml tubes
25 Vertical
Laminar
Air Flow
Cabinet
Vertical Laminar Air Flow
Cabinet 1) Inner work surface width a minimum of 2 feet
for easy handling of samples 2) Laminar Air Flow Cabinet should be tested for
cross-contamination and product protection using microbiological test methods specified in EN12469.
3) Sentinel Microprocessor-Based Control & Alarm
System 4) ISO Class 4 Air Cleanliness
5) Front Sliding sash 6) Cabinet Construction
a) Main Body : 1.2 mm / 0.05”/ 18 gauge electro-galvanised steel with white oven-baked epoxy powder-coated finish
b) Work Zone : 1.2 mm (0.05") 18 gauge Stainless Steel, grade 304, 4B finish. Single
piece stainless steel work surface with a curved front edge for maximum operator comfort
c) Side Walls : Colourless and Transparent UV absorbing tempered glass to enhance
visibility inside the work area. 7) Raised Front edge.
8) Temperature compensated Air velocity sensor.
9) HEPA Filter Typical efficiency - 99.99 % for particles size at 0.3 microns.
10) Additional disposable pre-filter with 80 %
02 pcs 16000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 136 -
arrestance to trap large particles in the inflow
air prior to reaching the main filter, protecting against damage and prolonging filter life.
11) External surfaces should be powder coated with Isocide Anti-microbial coating to eliminate
99.9 % of surface bacteria within 24 hours of exposure.
12) Permanently lubricated, high performance, energy efficient, centrifugal motor/fans. less
electrical energy consumption. Completely integrated assembly to optimize motor cooling.
All rotating parts should be balanced for smooth, quiet and vibration-free operation.
13) Sound Emission : < 61 dBA as per IEST-RP-CC002.2
14) Electrical 220-240V, AC.
15) To be provided with additional accessories-
i) Support stand with adjustable height. ii) UV lamp for decontamination. iii) Ergonomic height adjustable Lab chair.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 137 -
SL. NO.
NAME OF EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
REQUIREMENTS /QTY(FOR ESI-PGIMSR, JOKA)
EMD VALUE
QUOTED (YES/NO)
26 Class II
Biological Safety Cabinet Type A2
Class II Biological Safety Cabinet
Type A2
1. Size atleast 1.2 X 0.6 X 0.6 meters
2. EN 12469 Certified 3. Recirculation 70% & Exhaust 30%
4. Average Air Flow Velocity: (1) Inflow : 0.45 m/s (90 fpm) at
initial setpoint, audible/visual
alarm should activate at 0.40 m/s (80 fpm)
(2) Downflow : 0.30 m/s (60 fpm) at initial setpoint with uniformity of better than +/- 20%
5. Noise Level < 62 dBA according to EN 12469
6. Cabinet Construction: (1) Main Body: 1.2 mm (0.06") 16
gauge electrogalvanized steel with
white oven-baked epoxy antimicrobial powder coated finish
Work Zone: 1.5 mm (0.06") 16 gauge stainless steel, type 304,
with 4B finish Interior work area formed from a single piece of stainless steel with large radius
corners to simplify cleaning. 7. ULPA filters with efficiency greater than
99.999 % for superior operator and
03pcs 36000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 138 -
product protection
8. Standard Compliance : 1) Filter performance - IEST-RP-
CC034.1, IEST-RP-CC007.1,
IEST-RP 2) Electrical Safety - IEC 61010-1 /
EN 61010-1 / UL 3101-1 / hsirig, CSA C22.2 No. 1010.1-92
3) ISO Class 3 air cleanliness in work
zone.
9. Negative pressure plenum should surround contaminated positive pressure plenum for quiet, uniform airflow
10. Microprocessor Control with temperature compensated airflow sensor
for supervising all cabinet functions.
11. Antimicrobial coating on all painted surfaces to protect against surface
contamination.
12. Advanced separatorless mini-pleated ULPA filters tested to > 99.999% efficiency for 0.1 - 0.3 micron
particulates.
13. Digital read-out with alpha-numeric display should indicate all input, status
and alarm functions.
14.The cabinet work zone should not have welded joints to collect contaminants or
rust.
15.Blower should be Electronically Commutated Motor (ECM)
16. A recessed central area and stainless
steel drain pan channels for preventing liquids from entering the lower filtration and blower systems
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 139 -
17.Angled viewing window and narrow
profile front grille to improve reach into the work area
18.Front armrest raised above the work zone to improve comfort and to ensure
no airflow blockage
19.Frameless, shatterproof sash for easier cleaning, and for larger, unobstructed
viewing area
20.The Biological Safety Cabinet Should be individually tested, documented by serial
number and validated with the following test methods.
21.Inflow / downflow velocity PAO Aerosol
challenge for filter integrity Light, noise and vibration Airflow pattern
visualization Electrical safety to IEC61010-1
22.Electrical 220-240V, AC,
23.To be provided with additional accessories-
(a) UV Lamp (b) Ergonomic height adjustable chair.
27 Vortex
Mixer
Vortex Mixer 1) 1200 rpm 2) 220/230 V AC
3) Size 12” × 12”
03pcs 30000.00
28 Water
Bath
Water Bath 1) Double walled made of stainless steel.
2) Outer wall powder coated 3) Space between double walls is filled with
glass wool for insulation 4) Provided with drain plug for easy emptying
5) Reliable immersion heating elements
03 pcs 3000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 140 -
6) Thermostat controlled temperature from
ambient to 100 degree Celsius +/- 0.5 7) Digital Display of temperature with
appropriate regulators, on /off switch,
alarm 8) Suitable to operate on 220 V AC supply
9) To be provided with accessories (1) Stirrer with S/S rods and blades (2) Test tube racks of S/S
29 Single
channel micropipette
Single channel micropipette 1) Single channel variable volume 0.1µl-
2/2.5/5 µl
2) Systematic error should not be more than 3% at minimum volume and 1% at maximum volume
3) Minimum resolution of volume 0.001µl 4) Easy digital volume setting
5) Enhanced UV resistance 6) Precise reproducibility for long hours 7) Tip ejection automatic
8) User technical manual to be supplied in English
9) Certificate of calibration and inspection should be provided
10) Spare parts and accessories to be provided
with pipettes. 11) Should provide compatible stands
05 pcs 2500.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 141 -
SL. NO.
NAME OF EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
REQUIREMENTS /QTY(FOR ESI-PGIMSR, JOKA)
EMD VALUE
QUOTED (YES/NO)
Department of Pathology(For ESIC
HOSPITAL, JOKA & Manicktala)
1 FULLY AUTOMATED SLIDE PREPARATION SYSTEM
FULLY AUTOMATED SLIDE PREPARATION SYSTEM
1. The system must be walk away fully Automated
Slide Preparation system to process slides for Immuno Histo Chemistry, In Situ Hybridization, Silver In Situ Hybridization ,Immuno Fluroscence and should be able to process IHC with IVD approved p16 antibody for the stage detection of cervical cancer.
2. There should be options for varying temperature and incubation time.
3. The system must be fully automated to do baking, deparaffinization, antigen retrieval and staining within the same system .
4. The System should be open for Primary antibodies.
5. The system should be able to generate fully prepared 60 IHC Slides in a 9-10 hour shift.
01 pc For ESIC HOSPITAL, JOKA
48000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 142 -
6. The system must have individual Slide heaters for all the slide positions,slide temperature should be individually controlled.
7. The system should have a mechanism which will
be able to control evaporation and protect tissue integrity on each slides.
8. The reagents and the antibody should get mixed through air whirlpool and no mechanical part should be involved for mixing the reagents and antibodies.
9. Only 100 micro litre of Primary antibody must be required for all types of slides irrespective of the size of the tissue section.
10. There should be free supply of reagents, buffer s and DAB for the first 200 Slides.
11. The system should be able to recognize Slide Specific Barcode label which would provide automatic programming, patient and case identification.
12. The system should be US FDA certified.
13. Online UPS must be provided with minimum one hour back.
14. The system should have compatible computer
and software of latest technology available during installation. The software should be upgradable.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 143 -
2 Fully Automated
Urine Analyzer
Fully Automated Urine Analyzer 1. Random access system for physical, chemical and
sediment analysis on urine specimens.
2. Multiparameter Chemistry analysis of at least 10
parameters including:
(a) Specific gravity
(b) pH
(c) Albumin
(d) Glucose
(e) Ketone Bodies
(f) Bilirubin
(g) Urobilinogen
(h) Blood/Hemoglobin
(i) Micro albumin
(j) Nitrite
3. Analysis of standard urinary sediments consisting of
different cells, casts and crystals.
4. Throughput-60/hour including sediment analysis in
random access mode.
5. Microprocessor based photometric analysis of
chemical parameters and flat flow cell technology
with high speed and 800-1000 frame imaging for
sediment analysis.
01 pc For ESIC HOSPITAL, JOKA
40000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 144 -
6. Interconnected parallel pc with appropriate soft
ware for –
Retrival of analysis data
Display of analysis data
Image display of formed elements
Storage of data of results and others atleast
10,000 in number
7. Bar coded facility for reagent and sample
identification
8. Laser colored printing of results and data
9. Power back up with UPS for at least 2 hours
10. Accessories
a. Sample rack to hold 50 samples-05
b. Reagents for start up- 1000 analysis
c. International certification for medical equipments
3 Bone decalcifier
automated,
electrolytic
decalfication system
Bone decalcifier automated, electrolytic decalfication system, holding capacity for 30 cassettes and at least 700ml decalcifying solution, digitally controlled.
01 pc For ESIC HOSPITAL, JOKA
2000.00
4 LBC Specifications for LBC
1. Automated system for processing of Gynaecological and non- gynaecological cytology samples for liquid based cytology
01 pc For ESIC HOSPITAL, JOKA
30000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 145 -
along with automated stainer. 2. Should have ability to make single slides which
is uniform and reproducible. 3. Should have a controlled membrane transfer
technology to make a thin smear with uniform distribution of cells.
4. System should allow residual material to be used for ancillary testing such as HPV, CT/NG, Immunocytochemistry, Special Stains, cell blocks etc.
5. Should have an automated slide stainer with an ability to run at least 30 slides in half an hour.
6. UPS with two hour power backup. 7. CE certificate
Accessories:
1. Microscopic slides- 2 boxes of 100 slides 2. Filter- 2 box to process 200 samples 3. Solution -2 box to process 200 samples 4. Preservative solution -2 box to process 200
samples 5. Staining kit for staining at least 200 smears 6. All the standard accessories to be provided with
the equipment. 5 Patient and data
management
system
Patient and data management system for laboratory services
1. Fast processing system with high end security having
several different modules for patient and data
management of the laboratories.
2. Should have the ability to generate unique
identification number of the patient starting from
lab registration, sample collection, testing and
report delivery with generation of bar code id, and
01 pc For ESIC HOSPITAL, JOKA
40000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 146 -
stickers.
3. An integrated token system for the patients while
waiting for sample collection.
4. Computer with bar code reader in registration,
sample collection, different labs ( clinical pathology,
Cytopathology, hematology, histopathology,
different sections of biochemistry and microbiology)
5. Easy to operate
6. Ability to store data of at least 5000 patients per
day.
7. Data to be accessible on mobile, laptop, tablets etc
and the ability to deliver SMS to target
people(patients as well as doctors).
8. Result modification before final report delivery.
9. Can be integrated with other automated lab
equipments.
10. New features can be upgraded time to time as per
requirements
11. Accessories for the system to be supplied along with
the software.
6 Automated Cover Slipper
Automated Cover Slipper 1. Fully automated unit with a through
put of 400 slides/hr. at least
2. Should be compatible with different
01 pc For ESIC HOSPITAL, JOKA
40000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 147 -
sizes and thickness of cover slip as
written below.
(a) Size – 40mm, 50mm, 55mm, 60mm.
(b) Thickness – 0.13 – 0.17mm.
3. Should be compatible with different
solvent like xylene, d-limonene and
aliphatic hydrocarban –based
substitute and mounting medium like
DPX etc.
4. Should be able to handle both histology
and cytology sample simultaneously.
5. Should have an in-built filter to remove
any vapors or fumes.
6. Easy to operate with different program
setting and a touch screen panel.
7. Should be able to accept slides from
different automated slide stains.
8. UPS for 1hours back up.
9. International CE certification for
medical equipment.
Accessories – 1. Cover slips of different sizes &
thickness – 500 each.
2. Dust cover.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 148 -
3. Standard accessories with the main
equipment.
7 Human morbid tissue
materials
Specification for human morbid tissue materials
For ESIC HOSPITAL, JOKA
Cardio-Vascular Mitral stenosis Atheroma aorta Lt. ventricular hypertrophy Fibrinous pericarditis Dilated Cardiomyopathy Infective endocarditis
2 each 500.00
Respiratory Lobar pneumonia Bronchiectasis Emphysema Pulmonary Tuberculosis fibrocaseous & miliary Bronchogenic carcinoma Silicosis Bysinosis
2 each 500.00
Gastro-Intestinal Peptic ulcer Typhoid ulcer of S.I.
2 each 100.00
Renal Granular contracted kidney Large white kidney Hydronephrosis Renal cell carcinoma Renal stone
2 each 200.00
Vascular Syphilitic Aortits 2 each 50.00
Bone Osteomyelitis-sequestrum TB spine Osteogenic sarcoma Giant cell tumor
2 each 200.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 149 -
Female Genital Fibroid uterus Carcinoma cervix
2 each 100.00
Hepato-Biliary Micro-nodular cirrhosis Fatty liver Metastatic liver HCC
2 each 200.00
Female Breast Carcinoma breast 2 each 50.00
Male Genital Carcinoma Penis Seminoma of testis Benign hyperplasia of Prostate
2 each 100.00
Lymph Node TB Lymph Node Hodgkins LN 2 each 50.00
8 GROSSING TABLE WITH BIOSAFETY HOOD
1. Should be of High-quality stainless steel construction with Formalin container and height adjustment via electro hydraulic mechanism.
2. Vacuum breaker-protected water supply 3. Ventilation system with Two
options(outside source or inbuilt) 4. Large sink with mixing faucet 5. Ample lighting 6. Magnetic instrument holder 7. Washable dissecting board 8. Must have Service centre in Kolkata
9. Accessories to be provided with Grossing Station:
Grossing board to accommodate a wide range of
tissue types. Should have two adjustable wells to ensure grossing to an exact thickness
Integrated rulers on the standard and large boards
to enable gross measurement of specimens. Trimming knives and scalpel blades to provide the
sharp cuts necessary for exact grossing
01 pc (for ESI Hospital , Manicktala)
4,000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 150 -
techniques. Tissue tampers for allowing a firm hold on
specimens while making horizontal cuts. 2-4 grossing forks designed to hold specimens
including fragile tissue and any specimens with layers, while maintaining perfect specimen form and integrity.
Dust cover Dictating unit with microphone UPS 1.0 KVA Integrated imaging system Infrared control.
9 GROSSING STATION
Item: : Histopathological Grossing table / Grossing Station elevated floor model with Electrical and mechanical controls with UPS 1.0 KVA . Details: 1. Cutting board with black viewing surface, to accommodate a wide range of tissue types. Should have two adjustable wells to ensure grossing to an exact thickness. 2. Connecting tubes for water supply and drainage.
3. Sprinkler system for easy cleaning of the working
area.
4. Specimen safe drain system.
5. Fine grating S.S. sink.
6. Electronic scale upto 2000g at least.
7. Integrated S.S. rulers in cm / mm scale on the standard and large boards. 8. Light tubes and adjustable spot lights.
9. Filtration system to suck-off polluted air, with easily Replaceable filter, alum oxide. 10. Magnifying Glass with long handle (flexible).
01 pc (for ESI Hospital , Joka)
4000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 151 -
11. Separate metal table for grossing with drawers.
12. Formalin Container.
13. Dictating Unit with microphone and controlling unit & foot switch Essential Accessories must be supplied with the
main consignment
Trimming knives and scalpel blades to provide the sharp cuts necessary for exact grossing techniques.
Tissue tampers for allowing a firm hold on specimens while making horizontal cuts.
2-4 grossing forks designed to hold specimens including fragile tissue and any specimens with layers, while maintaining perfect specimen form and integrity.
Protective Dust Cover UPS 1.0 KVA Capacity
10 LABORATORY MICROWAVE PROCESSOR SYSTEM FOR ENZYME RETRIEVAL
Nomenclature: Laboratory Microwave Processor System for Enzyme Retrieval Table- top Model 20 to 30 Litre capacity. Description: Table-top model, capacity 20-30 Litre, convection mode, S.S. body, preferably ceramic enamel inner wall, programmable digital temperature controller and display within a range of 40°C to 108°C, built-in temperature probe, automatically controlled programmable timer setting and digital display, wattage level 800 - 1000 watt : MW leakage proof design, overheating prevented design, audible alarm with user adjustable time delays, throughput of 80 – 100 slides per run, dewaxing, rehydration and antigen retrieval in approximately 30
01 pc (for ESI Hospital , Joka)
3000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 152 -
minutes,IEC/CE/ISO Certified model. Essential Accessories :
1. Compatible Plastic Rack for holding slides: 5 (five) numbers
2. MW compatible specimen containers assorted sizes: 5 (five) numbers
3. U.P.S. 1 KVA: 1 (one)Number 4. Operator’s Guide
11 pH METER DIGITAL
Nomenclature : pH Meter digital pen type. ( Minor variation of quoted specification may be accepted within a short range as available in the market nearest to the requirement of the consignor) Principle: Microprocessor controlled pen type equipment.
pH range: 0 – 14 pH Units.
mV range: 0 to ± 1999 mV.
Resolution: 0.01 pH; 1 mV. Accuracy: ±0.01 pH ± 1 digit; ± mV ± 1 digit Operating temperature: 10˚C to 50˚C.
05 pcs (04 pcs for ESI Hospital , Joka & 01 pcs for ESI Hospital Manicktala)
5000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 153 -
Operating Panel & Display: Panel for different functions with digital LED Display.
12 AUTOMATIC
PRECISION MICROBALANC
E
Nomenclature: Electronic precision weighing balance 150g (approx) with display and UPS. (Variation of capacity may be accepted within a short range available in the market nearest to the requirement of the consignor) Description : Electronic precision microbalance with chemical and moisture proof stainless steel top-fitted weighing surface; LCD display panel and control panel; interfaced peripheral printer with key-panel; functional for piece counting, % weighing and dynamic weighing; provision of display of weight in mg / gm must be there; easy calibration, cleaning and maintenance; to be supplied with full documentation of precision & accuracy certificate. Power cord Indian type. Capacity: Maximum capacity : Approx. 150 g Readability : 0.01 g Repeatability : 0.01 g Linearity : ± 0.02 g ( at ambient temperature) Essential Accessories must be supplied with the main consignment & committed in the bid 1. Calibration weight. 2. Protective cover.
02 pcs (01 pc for ESI Hospital , Joka & 01 pc for ESI Hospital Manicktala)
10,000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 154 -
13 Hot plates electric with digital temperature controller, temperature range upto 300°C, heat-proof powder coated cast iron top, spiral heaters, thermostatic heat control
2 pcs (For ESI-
PGIMSR, JOKA) 4000
14 Electric Vacuum Embedding Bath
______________________ 1 pc (For ESI-
PGIMSR, JOKA) 10,000
15 Distilled Water Still
(Deionizer), removal of inorganic and organic ions, dissolved particles, microorganisms, etc., with vacuum system, analytical grade water purification & electro-deionization system, multi-stage (prefiltration, particle clearing, reverse osmosis, electro-deionization and ultra-violet purification) with display and self performance check, connectivity to data management system/ PC with printer for traceability of water quality
1 pc (For ESI-
PGIMSR, JOKA) 20000
16 Band Saw all S.S. 8 cm with rounded ends electric
Maximum job height 200mm, maximum throat 200mm, approx table dimension 600x600mm, blade size approx 3500x30x1.0 mm(thickness), blade speed 20 to 100 m per min, with saw and coolant motor
2 pc (For ESI-
PGIMSR, JOKA) 1000
17 Staining Racks S.S. horizontal with handle cradle type for 10 slides/ 20 slides
20 pc (For ESI-
PGIMSR, JOKA) 100
18 Precision Chemical Balance
Precision Chemical Balance with assorted precision brass weights 1mg to 200g,
2 pc, (For ESI-
PGIMSR, JOKA) 1000
19 Laboratory Counter Laboratory Counter Clay-Adams 9 keys spring loaded, including eight individual counting keys and one totalizer heavy duty metallic body, good visibility of rotating digits, digit range 0 to 100 for each, audible alarm at 100 count in total,. Options for counting of cell, simple computation and percentage counting.
6 pcs (For ESI-
PGIMSR, JOKA) 50
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 155 -
Individual key counting limit of 999 cells. Bilateral sturdy resetting knobs.
20 Automatic Timer Clock Digital
Automatic Timer Clock Digital with Split and Lap timer, range upto 3 hours
6 pc(For ESI-
PGIMSR, JOKA) 100
21 Bone Saw 8 inches blade rounded point
Bone Saw 8 inches blade rounded point, high carbon steel blade to withstand 70°C temperature of friction, sharp cutting edges of teeth, ergonomic handle design
2 pc (For ESI-
PGIMSR, JOKA) 50
22 Drill for boring glass
______________ 2 pcs (For ESI-
PGIMSR, JOKA) 100
23 Blow piece with bellow for bending glass
_____________ 2 pcs(For ESI-
PGIMSR, JOKA) 50
24 Sternal Puncture
Needle Sternal Puncture Needle (Klima and Salah type)Heavy duty stainless steel made, with total assembly comprising of aspiration needle with adjustable guard and trocar, Size:15G, 1 7/8inches Adult size
6 each (For
ESI-PGIMSR,
JOKA)
100
25 Sternal Puncture
Needle Sternal Puncture Needle(Klima and Salah type) Heavy duty stainless steel made, with total assembly comprising of aspiration needle with adjustable guard and trocar, Size: 18G, 1 ½ inches Child size
6 each (For
ESI-PGIMSR,
JOKA)
100
26 Liver Biopsy Needle Trucut needle s.s.
_____________ 6 pcs (For ESI-
PGIMSR, JOKA) 100
27 Box weight analytical
______________ 1pc (For ESI-
PGIMSR, JOKA) 50
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 156 -
28 Stop watch digital with LED/LCD display reading at 1/5 display
_____________
6 pc (For ESI-
PGIMSR, JOKA) 100
29 Ultra-violet lamp table top model
_____________ 1 pc (For ESI-
PGIMSR, JOKA) 2000
30 Surgical Instruments assorted
Surgical Instruments assorted
Autopsy knife blade 100mm with handle
Autopsy knife blade 170mm with handle
Autopsy knife blade 325mm with handle
Dissecting scalpel blade curved tip with handle
Dissecting scalpel blade pointed tip with handle
Forceps Artery 7.5 inch
Forceps Cartilage Curved 5 inches
Forceps Cartilage Straight 5 inches
Forceps dissecting plain serrated jaws broad tip 5.5.inches
Forceps dissecting plain serrated jaws broad tip 7.5.inches
Forceps dissecting plain serrated jaws Fine tip 5.5.inches
2 sets (For ESI-
PGIMSR, JOKA) 4000
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 157 -
Forceps Iris
Forceps Sinus
Forceps Specimen
Forceps Tissue 5 inches
Forceps Tissue 8 inches
Knife Professional 250x20mm
Knife Senior 225x25mm
Mallet S.S.
Needle Teasing S.S.
Probe Curved end S.S.
Probe Straight S.S.
Scissors Angle Fine Pointed Dissecting 4.5 inches
Scissors Fine Pointed Curved 5.5 inches
Scissors Fine Pointed Straight 4.5 inches
Scissors Mayo Dissecting Curved 5.5 inches
Scissors Mayo Dissecting Straight 5.5 inches
Scissors Mayo Dissecting Straight 9 inches
Scissors Surgical Curved blunt/sharp point5.5 inches
Scissors Surgical Straight blunt/blunt
Scissors Surgical Straight sharp/sharp
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 158 -
Speculum Nasal
Sponge Holder
Surgical blade holder 6 inches
Trimming knife blade 130mm with handle
Trimming knife blade 260mm with handle
31 Dark Room Lamp __________________ 1pc (For ESI-
PGIMSR, JOKA) 50
32 Deep Pan S.S. __________________ 5 pc (For ESI-
PGIMSR, JOKA) 50
33 Paraffin Pouring Pitcher with long spout and heat resistant handle S.S.
__________________ 2 pcs (For ESI-
PGIMSR, JOKA) 50
34 Sampling scoop S.S.
__________________ 2 pcs (For ESI-
PGIMSR, JOKA) 50
35 Sampling spatula S.S. 6 inches
__________________ 2 pcs (For ESI-
PGIMSR, JOKA) 50
36 Sampling spatula S.S. 10 inches
__________________ 2 pcs (For ESI-
PGIMSR, JOKA) 50
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 159 -
37 Funnel S.S. dia 10mm/4 inches
__________________ 5 pcs (For ESI-
PGIMSR, JOKA) 50
38 Funnel S.S. dia 15mm/6 inches
__________________ 5 pcs (For ESI-
PGIMSR, JOKA) 50
39 Microtome Knife Carbon steel Profile C 120 mm
__________________ 2 pcs(For ESI-
PGIMSR, JOKA) 50
40 Microtome Knife Holder with handle
__________________ 2 pcs (For ESI-
PGIMSR, JOKA) 50
41 Belgian Hone Best quality
__________________ 1 pc (For ESI-
PGIMSR, JOKA) 50
42 Leather Strop superfine quality double sided
__________________ 1 pc (For ESI-
PGIMSR, JOKA) 50
43 Knife Sharpener automatic
__________________ 1pc (For ESI-
PGIMSR, JOKA) 5,000
44 Post-mortem set
Autopsy knife blade 100mm with handle
Autopsy knife blade 170mm with handle
Autopsy knife
__________________ 2 sets (For ESI-
PGIMSR, JOKA) 4,000
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 160 -
blade 325mm with handle
Calipers
Curettes
Cuscoe’s speculum
Dilators
Enterotomes and viscerotomes
Forceps Artery 7.5 inch
Forceps Cartilage Curved 5 inches
Forceps Cartilage Straight 5 inches
Forceps dissecting plain serrated jaws broad tip 5.5.inches
Forceps dissecting plain serrated jaws broad tip 7.5.inches
Forceps dissecting plain serrated jaws Fine tip 5.5.inches
Forceps Iris
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 161 -
Forceps Sinus
Forceps Specimen
Irrigation device
Kidney tray 8 inches
Knife Brain
Knife Cartilage
Knife Professional
Knife Resection
Metallic ruler tape flexible
Nasal speculum
Needle holders
Retractors
Rib shears
Scalpels assorted sizes
Scissors Angle Fine Pointed Dissecting 4.5 inches
Scissors Dissecting
Scissors Fine
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 162 -
Pointed Curved 5.5 inches
Scissors Fine Pointed Straight 4.5 inches
Scissors Iris
Scissors Mayo Dissecting Curved 5.5 inches
Scissors Mayo Dissecting Straight 5.5 inches
Scissors Mayo Dissecting Straight 9 inches
Scissors Metzenbaum
Scissors Surgical Curved blunt/sharp point5.5 inches
Scissors Surgical Straight blunt/blunt
Scissors Surgical Straight sharp/sharp
Sternal Saw
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 163 -
Stryker Skull Saw
Surgical staplerwith reloadable staple cartridges
Tenaculum
Towel forceps
Tray 12 x 12 inches
Tray 12 x 18 inches
Trocars
45 Bone marrow Biopsy Needle Jamshidi Type Heavy duty stainless steel made two piece, with light weight T-Handle streamlined and ergonomic design, trocar with tapered stylet point and triple crowned cannula tip.Adult type, 11G, Stainless steel instrument tray with lid 8 inches x 8 inches
__________________ 2 pcs(For ESI-
PGIMSR, JOKA) 50
46 Bone marrow Biopsy Needle Jamshidi Type Heavy duty
__________________ 2 pcs (For ESI-
PGIMSR, JOKA) 50
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 164 -
stainless steel made two piece, with light weight T-Handle streamlined and ergonomic design, trocar with tapered stylet point and triple crowned cannula tip.Pediatric type, 13G, Stainless steel instrument tray with lid 8 inches x 8 inches
47 Test tube rack HDPE 30positions
__________________ 5 pcs(For ESI-PGIMSR, JOKA)
100
48 Bone decalcifier electric
__________________ 1 pc (For ESI-PGIMSR, JOKA)
4000
49 Class II Biosafety
Laminar
Power supply: 440 V,AC, 3 Phase Material of Construction: SS 304 Motor : Supply: 0.5 HP: 1440 RPM: 1-0, 230 V AC: 50 Hz Exhaust: 2 HP 2800 RPM Blower (Impeller) : Supply: 210 x 117 Wmm Exhaust : ---- Dimensions: (W x D X H): 1060 x 1040 x 2150(Approximate) Bioclean work space: 877 x 660 x 610 Filters (W x D X H): Pre filter: size : 305 x 380 x 45
1 pc (for ESI
PGIMSR
Manicktala)
2000
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 165 -
Fresh Air Filter: Type: EU-6 Intermediate: Size: 915 x 610 x 45 Type: EU-13 Final Filter: Size: 915 x 610 x 75 (ANTIMICROBIAL) Type: EU-13 Intermediate: Size: 915 x 610 x 100 (ANTIMICROBIAL) Type: EU-13 Exhaust filter: Size: 915 x 457 x 100 Type: EU-13 Differential pressure gauge : Magnehelic pressure gauge Across HEPA filter wrt. ambient: 0-25 mm Across work space wrt. ambient: 0-10 mm Illumination: UV light: 1.5' L & 30W FLU light: 1.5' L & 20W Special features: Virus burnout system
50 Homogenizer with
two probes
Homogenizer with two probes
Small dispersing instrument for volumes from 0.1-100 ml Quick-connect coupling for probes Stainless steel probes Option of using with plastic disposable dispersing elements • High performance drive Probe for volume Range (H20): 0.1 to 10 mL, 1-100 ml Speed Range: 8000 to 30,000rpm Maximum Viscosity (cps): 20000 Preferably built-speed control Use Options: Handheld or stand-mounted Motor: 125w Noise Level: 65dB or less Overload Protection: Yes
1 pc (for ESI
PGIMSR
Manicktala)
10,000
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 166 -
Should be supplied with all the accessories like Stand, boss clamp, clamp etc
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 167 -
SL. NO.
NAME OF EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
REQUIREMENTS /QTY(FOR ESI-PGIMSR, JOKA)
EMD VALUE
QUOTED (YES/NO)
CLINICAL LABORATORY (For ESI-PGIMSR, JOKA)
51 Sedimentation apparatus Westergren with
Sedimentation apparatus Westergren with
1. metallic rack with spring-loaded pipette holder and round base with rubber cushion, provided with spirit level 5 station
2. Glass Westergren pipettes, class A glass with precision etched and printed marks and ground lower end and smooth rounded top end : 5 (Five) tubes
3. Pipette filler for Westergren tube : 1 (One) No.
12 sets(For
ESI-PGIMSR,
JOKA)
1000
52 Sedimentation apparatus Wintrobe
Sedimentation apparatus Wintrobe with
1. metallic rack with screw adjusted pipette holder and round base with rubber cushion 5 station
2. Glass Wintrobe’s tubes, class A glass with precision etched and printed marks in mm in both ascending and descending order, polished and rounded opening : 5 (Five) tubes
3. Glass Landau’s tubes, class A glass with bulb and precision etched and printed marks at 0 to 50 mm : 5 (Five) tubes
4. Filling pipette with long stem and rubber teat : 5(Five) No.s
5 sets(For ESI-
PGIMSR, JOKA) 100
53 Urinometer precision glass with
___________________ 20(For ESI-
PGIMSR, JOKA) 500
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 168 -
mercury bulb and graduated stem with temperature mark
54 Albuminometer Esbach’s Corning glass with precision marking with corrosion-resistant rubber stopper in wooden/polymer case
_________________ 20(For ESI-
PGIMSR, JOKA) 500
55 Crucible with pestle chinaware tough quality
_________________ 2(For ESI-
PGIMSR, JOKA) 50
56 Crucible Gooch with adaptor
_________________ 2(For ESI-
PGIMSR, JOKA) 50
57 Balance sensitive electronic precision weighing balance 2000g (approx) with display and UPS.
Electronic precision balance with chemical and moisture proof stainless steel top-fitted weighing surface; LCD display panel and
_________________ 2(For ESI-
PGIMSR, JOKA) 2000
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 169 -
control panel; interfaced peripheral printer with key-panel; functional for piece counting, % weighing and dynamic weighing; provision of display of weight in mg / gm must be there; easy calibration, cleaning and maintenance; to be supplied with full documentation of precision & accuracy certificate. Maximum capacity: Approx. 12000g Readability : 0.1g Repeatability : 0.1g Linearity : ± 0.3g (at ambient temperature) Essential Accessories 1. UPS of capacity 0.5 KVA. 2. Power cord Indian type. 3. Extension cable
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 170 -
5m. 4. Calibration weight. 5. Protective cover.
58 Balance chemical with fractional weights.
Balance chemical with fractional weights.
Conventional chemical balance , corrosion and rust prevented metallic body resistant to expansion on heat; corrosion prevented balance pivot wedges; rust and corrosive-chemical resistant stainless steel double weighing pans; zeroing mechanism; side opening glass cabinet with base screws.
Weight box holding calibrated brass fractional weights resistant to rust and sulfation; provided with forceps.
Weight range 1 mg to 200 g.
2(For ESI-
PGIMSR, JOKA) 5000
59 Test tube rack HDPE 10 positions
60(For ESI-
PGIMSR, JOKA) 100
60 Spectrophotometer
Spectrophotometer
Analysis Option: a. Absorbance
b. 1 point end linear & non linear.
c. 2 point end linear & non
1(For ESI-
PGIMSR, JOKA) 5000
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 171 -
linear.
d. Rate linear & non linear.
e. Immunoturbidimetry.
Light Sources: Pre aligned Quartz halogen lamp.
Wave Length: Automatically Selectable narrow band interference quartz filter within wavelength of 340 -700 nm -- fixed seven or eight filters and two optional filters as per users choice.
Measurement Time : Selectable.
Cuvette a. Flow cell Cuvette.
b. External rectangular Cuvette.
Cuvette Temperature: Peltier control & programmable at 25˚C, 30˚C and 37˚C.
Aspiration System: Motor driven pump.
Aspiration Volume Programmable.
Cuvette Blanking: Automatic.
Programmable Parameter: About 100 user defined test programs including routine biochemical parameters, enzymes, immunological markers, truly open system,
selection through key- board.
Calibration: Automatic against standard /
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 172 -
calibration.
Quality control: a. 2 levels of control (at least)
b. Levey - Jennings diagram.
c. Manual entry of QC
Memory Storage: a. Minimum 200 patients result.
b. Calibration result.
c. Quality control result for 01 month.
Display:
a. Graphic LCD.
b. Display of reaction curve, absorbance, temperature.
c. Display of result of real time.
d. Graphical display of reaction time.
e. Calibration curve graphical display.
Key board:
a. Chemical and moisture prevented single touch alphanumeric membrane key panel.
Printer:
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 173 -
a. Built in thermal printer with full graphic facility.
b. Parallel full page ink printer with formatting options.
Reporting format: a. Conventional
b.SI unit(Optional/Interconvertible).
Recalculation : Recalculation of result following modification of calibration, measurement timings and wavelength.
Automatic Flagging: a. Absorbance and linearity cheek.
b. Reagent stability.
c. Substrate depletion.
Peripheral interfacing: a. Parallel ports for external printer , key- board and PC. Software PC Compatible.
Power Cord Indian Type 3-pin power cord locally available and replaceable .
Dust Cover Washable dust-covers for main unit and key-board, etc.
Working Manual Working Manual in original
61 Lumbar puncture needle s.s.
____________________ 12(For ESI-
PGIMSR, JOKA) 50
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 174 -
62 VOLUME DISPENSER
Nomenclature:Volume Dispenser Automatic. Type : Inert amber colored glass bottle reservoir with bottle top Ball-valve polymer pump graduated for variable volume adjustments, autoclavable, corrosion resistant . Capacity: Reservoir capacity 1000 ml.
Bottle top dispenser pump capacity 0 – 5.0 ml. with increments of 0.1 ml
01 pc (For ESI-PGIMSR, JOKA)
3000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 175 -
SL. NO.
NAME OF EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
REQUIREMENTS /QTY(FOR ESI-PGIMSR, JOKA)
EMD VALUE
QUOTED (YES/NO)
Department of BLOOD BANK (For ESIC HOSPITAL, JOKA)
1 ULTRA LOW TEMPERATURE LAB DEEP FREEZER
ULTRA LOW TEMPERATURE LAB DEEP FREEZER Nomenclature : Laboratory deep freezer floor model electrically operated, capacity of approx 550 L- 600 L ( Variation of capacity may be accepted within a short range available in the market nearest to the requirement of the consignor) Principle: Electrically operated vertical floor model with ultra cooling device, stainless steel interior, 4-5 replaceable storage compartment with stainless steel racks, temperature selector and Temperature Controller, eye- level display and temperature recorder, gasket sealing system to avoid ice formation, calibration mode should be built-in with the system and lock system in door. Temp. range: Selectable range from -400 C to - 80˚C.
Operating Panel & Display: Button/ switch panel for different functions and programmes,viz, start, stop, temperature control, temperature and time setting with
01 pc
25000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 176 -
LED Display. Battery backup for alarm & display. Display of set and actual running values. Alarm: Acoustic Signal for over or under-temperature, improper locking of door(optional), or error. Essential Accessories must be supplied with the main consignment & committed in the bid 1. Thermometer. 2. UPS 2.0 KVA. 3. Power cord Indian type. 4. Storage boxes.
2 Automated Immunohematol
ogy detection system
Specification Automated Immunohematology detection
system by Gel Card Technology. 1. Semi-automated immunohematology analyzer
incorporated with centrifugation, reading and interpretation abilities for the tests performs by the column agglutination technology for transfusion related cross matching on anti human globulin and enzyme phase (to detect both IgG & IgM antibodies), blood grouping, partial Rh-D typing, antibody screening &identification in a single step.
2. The following range of investigations must be provided in the system.
i. ABO Blood grouping with partial D screening.
ii. Weak anti D test with ICT method.
iii. Antibody screening and identification.
iv. Single antigen test cards and antisera for Rh-C/c, E/e, Cw, Kell, Fya, Fyb, Jka, Jkb, Lewisa Lewisb,
01 pc 20000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 177 -
Lutherana, Lutheranb, MNS, etc.
v. Special gel cards for antihuman globulin test positive IgG, IgM, IgA, C3d, C3c etc.
vi. Provision for acid elution method.
vii. Special blood grouping cards for donor and recipient for DVI variant.
viii. Syphilis antibody detection.
Detail procedure for all compatible methodologies mention as above must be provided. 3. Automated card reading and report generation with
bar code security.
4. Expression of results in grades of agglutination.
5. Capacity for 20 – 24 gel cards with ‘V’ bottom tubes in single run.
6. Peltier heating of incubator with programmable controls for 15 minutes and digital display of temperature.
7. Centrifugation force with 80 – 84G.
8. Clear transparent top for centrifuge and incubator with rust and corrosion resistant body.
9. The system must be devoid of any wash phase.
10. Incorporated capabilities for validation storage and reproduction of results.
11. Parallel computer connection with bidirectional portability and appropriate software to be provided along with the equipment.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 178 -
12. Compatible printer for printing of different data and customized report to be provided along with the equipment.
13. A quality control system must be incorporated in the equipment for all the lab.
14.
i. Provision for 2 and 3 red cell panel for antibody screening, 11 cell panel for antibody identification and pooled ‘O’ cell with known phenotype for donor screening as per NACO Guidelines.
ii. Provision for NaCl/Enzyme and cold agglutinins cards, modified bromelin solution, papain, cell stab, cell thaw and cell freeze reagent.
15. CE/ISI compliance of the system.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 179 -
SL. NO.
NAME OF EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
REQUIREMENTS /QTY(FOR ESI-PGIMSR, JOKA)
EMD VALUE
QUOTED (YES/NO)
DEPARTMENT. OF SURGERY ESI-PGIMSR, JOKA
1 OPERATING HAND
INSTRUMENTS OPERATING HAND INSTRUMENTS Set for LAPROSCOPIC SURGERY
01 set 10000.00
1 Trocar /Cannula Size 11 mm
3
Trocar with pyramidal tip ,multi function automatic valve,
stopcock for insufflation
2 Trocar/Cannula Size 5.5mm
3
Trocar with pyramidal tip ,multi function automatic valve,
stopcock for insufflation
3 Maryland Dissecting forceps, 5mm, working length 33cm
1
Rotating, Dismantable with channel for cleaning & connector
pin for unipolar coagulation. Insulated Metal Handle without
ratchet & Milled Radel shaft insulation. Easy to change insert.
4 Curved Kelly Dissecting forceps, 5mm, working length 33cm
1
Rotating, Dismantable with channel for cleaning & connector
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 180 -
pin for unipolar coagulation. Insulated Metal Handle without
ratchet & Milled Radel shaft insulation. Easy to change insert.
5 Right Angle Dissecting forceps, 5mm, working length 33cm
1
Rotating, Dismantable with channel for cleaning & connector
pin for unipolar coagulation. Insulated Metal Handle without
ratchet & Milled Radel shaft insulation. Easy to change insert.
6 Babcock Grasping forceps 5mm, working length 33cm
1
5mm, Rotating, Dismantable with channel for cleaning
Non insulated handle with ratcheting mechanism, easy to change insert
7 Alligator Light Grasping forceps,5mm, working length 33cm
1
5mm, Rotating, Dismantable with channel for cleaning & connector
pin for unipolar coagulation. Insulated Metal Handle with ratchet
& Milled Radel shaft insulation. Easy to change insert.
8 Fundus Grasper , 5mm, working length 33cm
2
5mm, Rotating, Dismantable with channel for cleaning
Metal Handle with ratchet & Milled Radel shaft insulation.
Easy to change insert.
9 Tooth Grasper / Allis, 5mm, working length 33cm, with double row of teeth
1
Rotating, Dismantable with channel for cleaning
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 181 -
Metal Handle with ratchet & Milled Radel shaft insulation.
Easy to change insert.
10 Endo Grasper , 5mm, working length 33cm
1
5mm, Rotating, Dismantable with channel for cleaning
Metal Handle with ratchet and non-ratchet & Milled Radel shaft insulation.
Easy to change insert.
11 Double Action Claw , 5mm, working length 33cm
1
5mm, Rotating, Dismantable with channel for cleaning
Insulated Metal Handle with ratchet and non ratchet facility &
Milled Radel shaft insulation. Easy to change insert.
12 Metzenbaum Scissor, 5mm, working length 33cm
1
5mm, Rotating, Dismantable with channel for cleaning & connector
pin for unipolar coagulation. Insulated Metal Handle without ratchet
& Milled Radel shaft insulation. Easy to change insert.
13 Straight Metzenbaum Scissor, 5mm, working length 33cm
1
5mm, Rotating, Dismantable with channel for cleaning & connector
pin for unipolar coagulation. Insulated Metal Handle without ratchet
& Milled Radel shaft insulation. Easy to change insert.
14 Hook Scissor, 5mm, working length 33cm
1
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 182 -
5mm, Rotating, Dismantable with channel for cleaning & connector
pin for unipolar coagulation. Insulated Metal Handle without ratchet
& Milled Radel shaft insulation. Easy to change insert.
15 Dissecting Electrode (L shaped) , 5mm, working length 33cm
1
5mm instrument with proper insulation upto working tip
16 Dissecting Electrode (Spatula) , 5mm, working length 33cm
1
5mm instrument with proper insulation upto working tip
17 Clip Applicator 10 mm dia for Ethicon LT-300
1
10mm, Rotating, with channel for cleaning
Metal Handle without ratchet .
18 Suction / Irrigation cannulas. Trumpet valve.
1
5mm all metal & single hand control trumpet with perforations at
distal tip for smooth function.
19 Reducer 10 / 5 mm for reducing 10 mm to 5mm dia.
1
20 Aspiration Needle, 5mm
1
21 Gall Bladder Extractor
1
10mm, Rotating, Dismantable with channel for cleaning
Metal Handle without ratchet .
22 Monopolar Cable
1
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 183 -
23 5mm Bipolar Fenestrated Forceps with Ring Handle and cable
1
24 Reusuable bipolar cable
1
25 5mm Straight tip needle holder with metal handle and ratcheting
1
mechanism, can be dismantled, with channel for cleaning.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 184 -
SL. NO.
NAME OF EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
REQUIREMENTS /QTY(FOR ESI-PGIMSR, JOKA)
EMD VALUE
QUOTED (YES/NO)
DEPT OF DERMATOLOGY ESI PGIMSR, JOKA KOLKATA
1 Radiofrequency machine
Radiofrequency machine Number of items: 2 Power required: 230v/50 hz Dimensions 260x300x150 Weight 7kg Electrodes insulated Frequency 0.20-2.93 Mhz Cut: 70%cut, 30% coagulation Coagulation : 60%coagulation, 40% cut Fulguration: available intensity control: Linear
02 pcs
2000.00
2 Centrifuge machine
Centrifuge machine Number of items- 2 Capacity in ml: 24x5 Type of head: Angle No. of tubes: 24 Maximum speed: 3500 rpm Maximum RCF: 1250 W×D×M (MM) : 210×210×250 Supply: 221-240v, 50Hz, single phase
02 pcs
500.00
3 Binocular microscope
Binocular microscope Optical system: UIS2 (UNIVERSAL INFINITY CORRECTED) CE certified Antifungal treated optical lens
02 pcs
6000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 185 -
Illumination: built in transmitted Koeheler illuminator, 6v/30W halogen bulb 100-120V/220-240V ̴ 0.85/0.45A , 50/60 Hz Focussing: Stage height movement by roller guide (rock & pinion), stroke/rotation=36.8mm Full stroke range: 25mm Revolving nose piece: Fixed, quadruple nose piece with inward tilt Binocular observation: field no. 20, tube inclination:30 degree, interpupillary distance adjustment range: 48mm-75mm Stage: size-188mm x 134mm, movement range: 76mm (X direction) x 50mm (Ydirection) Specimen holder: double size holder Rubber grip: equipped as standard Condenser: type- Abbe condenser, NA: 1.25 with oil immersion, aperture in diaphragm: built in Dimensions & weight: 233mm (W) X 411mm (H) X 367.5 mm (D), 8KG
DEPT OF ENT ESI PGIMSR, JOKA KOLKATA
1 Surgical Operating Microscope
Specification of Surgical Operating Microscope Surgical operating microscope for micro ear surgery and micro laryngeal surgery with the following associated features;
1. Integrated HD monitor to display surgical steps to
students.
2. Integrated HD video recording system with HD camera
system.
3. Integrated HD still photography enabling system with
camera attachment facility.
4. Data storage, transmission and documentation facility
with appropriate software.
5. Stereo co-observation tube for assistant surgeons and
01 set
50000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 186 -
students.
6. Lens for ear and laryngeal surgery (400, 200)
7. Lens covers and microscope covers for sterility
purposes
8. Microscope stand and wheels.
2 Rigid Oesophagoscope set Adult
Specification for Rigid Oesophagoscope set Adult: 1. 0 degree telescope diameter 5.5mm, length 53 cm, autoclavable with incorporated fibre optic light transmission 2. Telescope guide for use with 50cm esophagoscope 3. fibre optic light carrier for use with 50cm esophagoscope 4.Rigid oval esophagoscope, outer diameter 12 X 16 mm, length 50 cm 5. Rigid oval esophagoscope, outer diameter 10X14 mm, length, 50 cm 6. Prismatic light deflector, autoclavable with fibre optic light cable connection 7. fibre optic light carrier for use with 30cm esophagoscope 8. Rigid oval esophagoscope, outer diameter 12.2X 16.2 mm, length 30 cm 9. Rigid oval esophagoscope, outer diameter 10.2 X14.2 mm, length 30 cm 10. Rigid oval esophagoscope, outer diameter 8.6X 12.1 mm, length 30 cm 11. Fibre optic light carrier for use with 20 cm hypopharyngoscope 12. Rigid Oval Hypopharyngoscope, outer diameter 10X14 mm. length 20 cm 13. handle for Esophagoscopes 14. Adjustable magnifier autoclavable(swivel action) 15. Cotton carrier(55cm) 16. Rigid suction tube with rubber tip, straight, working length 55cm 17.spring handle sponge holder, working length 55cm
01 set
10000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 187 -
18. Alligator forceps for hard foreign bodies, double action jaws, sheath diameter 2.5mm,working length 55cm 19. biopsy forceps and foreign bodies, working length 55cm 20. cupped forceps for biopsies, working length 55cm 21. Peanut removal forceps ,working length 55cm 22. Cotton applicator, working length 30cm 23. Straight suction tube with rubber tip, working length 35cm 24. Spring handle sponge holder, working length 35cm 25. Alligator forceps, sheath diameter 2mm,working length 35cm 26. Peanut forceps, working length 35cm 27. Cupped forceps for biopsy ,working length 35cm 28. Universal forceps for biopsy and foreign bodies ,working length 35cm
3 Rigid oesophagoscopy set , Paediatric
Specification for rigid oesophagoscopy set , Paediatric 1, Oesophagoscope tube, size 6,length 30 cm 2. Oesophagoscope tube, size 5, length 30 cm 3. Oesophagoscope tube, size 4, length 30 cm 4. Oesophagoscope tube, size 3.5, length 18.5 cm 5. Oesophagoscope tube, size 3, length 18.5 cm 6. Prismatic light deflector ,autoclavable with connection for fibreoptic light cable 7. Rubber telescope guide 8. Adjustable magnifier (swivel action) autoclavable 9. 0 degree telescope, diameter 2.9 mm, autoclavable, fibreoptic light transmission incorporated 10. Optical forceps,2x2 tip, with spring action handle for use with telescope (for coins and flat foreign body) to be used with 30 cm oesphagoscope 11. Optical forceps with spring action handle for use with telescope (for peanuts and soft foreign body) to be used with 30 cm oesphagoscope 12. Optical forceps with spring action handle for hard foreign bodies to be used with 30 cm oesphagoscope 13. Peanut removal forceps with double action jaws, sheath diameter 1.5mm,working length 35cm 14. Biopsy and foreign body forceps, double action jaws, sheath
01 set
10000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 188 -
diameter 1,5mm, working length 35cm 15. Alligator forceps for hard foreign bodies, double action jaws, sheath diameter 1.5mm, working length 35cm 16. Cupped forceps for biopsy, double action jaws, sheath diameter 1.5mm, working length 35cm 17. Straight suction tube with rubber tip, working length 35cm 18. Straight cotton applicator working length 35cm - 3 such
4 Rigid bronchoscopy set, adult
Rigid bronchoscopy set, adult 1. 30 degree telescope, diameter 5.5mm, length 50cm, autoclavable, fibreoptic light transmission incorporated 2. 90 degree telescope diameter 5.5mm, length 50cm, autoclavable, fibreoptic light transmission incorporated 3. Rigid bronchoscope, size 8.5, length 43cm 4. Rigid bronchoscope, size 7.5, length 43cm 5. Rigid bronchoscope, size 6.5, length 43cm 6. Deflecting device for bronchoscopes and telescopes 7. FLUVOG Adapter with sliding glass window plug, sealing cap, notched lense and keyhole opening, movable 8. Adapters to respirator - 2 such 9. Rubber telescope guides - 2 such 10. Glass window plug - 2 such 11. Instrument guides for suction catheter - 2 such 12. Injection canula for positive pressure assisted ventilation, LUER lock, outer diameter 3.5 mm for use with bronchoscopes 13. Optical forceps, alligator, large jaws for hard foreign bodies 14. Optical biopsy forceps, circular cup, 4.3mm 15. Flexible forceps for biopsy 16. Alligator forceps for hard foreign bodies, double action jaws, diameter 2.5mm, working length 50cm 17. Peanut removal forceps, double action jaws, sheath diameter 2.5mm, working length 50 cm 18. Cupped forceps for biopsy, double action jaws ,sheath diameter 2.5mm, working length 50 cm 19. Cotton carrier, working length 50cm - 6 such 20. Sponge holder with spring handle, working length 50cm 21. Cytology brush with ring handle, working length 55cm 22. Coagulation suction tube, insulated, working length 50 cm
01 set
10000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 189 -
accompanied by unipolar high frequency cord with 5mm plug, length 300cm 23. Straight suction tube with rubber tip, working length 50cm - 2 such 24. Curved suction tube with rubber tip, working length 50 cm 25. Suction tubes 4mm diameter, length 50 cm - 2 such 26. Aspirator, can be connected to suction tubes or suction catheter 27. Spare glass for aspirator 28. HUZLY Aspirator and bronchial irrigator 29. Laryngeal syringe, 5ccm, LUER lock, with canula 30. Bronchial atomizer, with graduated container and rubber bulb, length 50cm 31. Laryngeal atomizer with bulb, length 50 cm 32. Suction catheter, 7 Fr with connector 33. Suction catheter, 5 Fr with connector
5 Rigid bronchoscopy set, Paediatric
Rigid bronchoscopy set, Paediatric 1. Bronchoscope size 6, length 30cm 2. Bronchoscope size 4.5, length 30cm 3. Bronchoscope size 3.7, length 30cm 4. Bronchoscope size 3.5, length 26cm 5. Bronchoscope size 3, length 26cm 6. . FLUVOG Adapter with sliding glass window plug, sealing cap, notched lense and keyhole opening, movable 7. Adapters to respirator - 2 such 8. Rubber telescope guides - 2 such 9. Glass window plug - 2 such 10. Instrument guides for suction catheter, short, for children and infants - 2 such 11. Injection canula , only, LUER lock, outer diameter 3.5 mm for use with bronchoscopes - 2 such 12. Prismatic light deflector, autoclavable with connection for fibreoptic light cable 13. Cotton applicator, working length 35cm - 3 such 14. Sponge holder with spring handle, working length 35cm 15. Foreign body basket with ring handle, working length 35cm 16. Cytology brush with ring handle, working length 35cm
01 set
10000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 190 -
17. Straight suction tube with rubber tip, working length 35cm 18. Curved suction tube with rubber tip, working length 35cm 19. Suction tube, 3mm, working length 35cm, curved 20. Bronchial atomizer, graduated container and rubber bulb, working length 40 cm 21. Graduated containers - 2 such 22. Aspirator with spare glass and cut off hole, can be connected to suction tube or catheter
6 AUDIOMETER
AUDIOMETER REQUIREMENT The audiometer should have the following specifications: *It should be a Clinical PC-based audiometer. *The manufacturer should provide instructions and provision for calibrating the instrument. *The following tests should be able to be performed by the audiometer:
Pure tone audiometry, Speech audiometry ( Including
Speech reception threshold and speech discrimination
score), SISI, ABLB, AUTO THRESHOLD , TONE DECAY
*It should have the following provisions: SMPS
Switch Mode Power Supply capable of withstanding
extreme
voltage fluctuations (115 V to 270 V)
INPUT: Tone, Speech, Tape, Pulse Tone.
OUTPUT: Left, Right, Bone, L + R. F/F Left, F/F Right, F/F
L+R.
HEADPHONES: TDH-39/TDH-49.
BONE: B-71 BONE CONDUCTOR.
Air : 120 dB Max, 125 Hz to 12 kHz., -20 dB Min.
01 set
10000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 191 -
Bone : 80 dB Max, 250 Hz to 6 kHz., -20dB Min.
Noise : Wide Band, Narrow Band, Speech Band.
Built-in Mike, Ext. Mike, Mike Sensitivity Control.
Interrupt Lock.
Printer Facility-Sequential Merged Graphs.
Memory Review.
Computer Interface.
Storage of the patient data in the hard disc for future
reference.
Connectivity to an external USB Printer to print the
reports.
7 IMPEDENCE AUDIOMETER
IMPEDENCE AUDIOMETER
It should meet the international standards
Should be able to test the following
1. Tympanometry
2. Acoustic reflex test
Should have facility for producing printed report
Should have facility for data storage
01 set
10000.00
8 TYMPANOMASTOID SET
SURGICAL INSTRUMENTS TYMPANOMASTOID SET
1. SHEA aural speculum – set of 4, black finish – 3 sets
2. Tumarkin tapered slotted aural speculum – set of 4 – 3
01 set
2000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 192 -
set
3. Adsonforcep – plain – S.Steel – 6 such
4. Adsonforcep – 1x2 teeth – S.Steel – 6such
5. Hartmann aural forcep – 3 such
6. Lempert endaural speculum – right – 3 such
7. Mollison self retaining mastoid retractor 3 such
8. Plester self retaining retractor 2x2 prong – 3 such
9. Plester self retaining retractor 3x3 prong – 3such
10. Plester self retaining retractor – right solid blade – 3
such
11. Plester self retaining retractor – left solid blade – 3such
12. Farabeuf periosteum elevator – straight – 3 such
13. Freer’selevator double ended – 3 such
14. Howarth elevator – 3such
15. Zollner suction tube with 4 microtips – 3 such
16. Verhoeven suction tubes – no. 12,14,16,18,20,22,24 – 3
sets
17. Verhoeven suction tube adaptor – 3 such
18. Micro aural crocodile serrated – fine straight – 3 such
19. Micro aural cup – straight – 3 such
20. Micro aural cup – upward – 3 such
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 193 -
21. Micro aural scissors – straight – 3 such
22. House dieter malleus nipper – up – 3such
23. House dieter malleus nipper – down – 3 such
24. Caw Thorne hook – micro pick 90 degree angled – 3
such
25. Caw Thorne hook – micro pick 45 degree angled – 3
such
26. Wullstein needle – very slight curved – 3 such
27. Wullstein needle – slight curved – 3 such
28. Wullstein needle – straight – 3such
29. Rosen curette curved straight shaft – 3uch
30. Sickle knife – 3 such
31. BealesRaspatory – 3 such
32. Circular cutting knife 60 degree – 3 such
33. Ball probe – 3such
34. Rosen elevator for lifting drum – 3such
35. Plester first incision knife – 3 such
36. Curved circular cutting knife – 3 such
37. House curette double ended – 3 such
38. House curette double ended slightly curved – 3 such
39. Myringotomy knife – 3such
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 194 -
40. Small curved scissor – 3 such
41. Mastoid micromotor drill (30000 rpm) 1
42. Straight hand piece for mastoid drill 1
43. Contra angle hand piece for mastoid drill 1
44. SS cutting burrs ( 8mm,6mm,4mm,2mm,1mm0.8mm) 1
each
45. Diamond polishing burrs (6mm, 4mm, 2mm 1mm) 1
each
9 STAPEDECTOMY SET
STAPEDECTOMY SET Each instrument one number required
Round Knife 45° diameter 1 mm, length 16 cm
Flag knife
Micro elevator
Sickle Knife, double-edged, standard model, slightly
curved, length 16 cm
Pick 90°, 16 cm, 0.6 mm
Pick 90°, 16 cm, 0.8 mm
Ear Forceps extra delicate, serrated, 0.4 x 3.5 mm,
working length 8 cm
Ear Forceps extra delicate, pointed, serrated, 1 x 4.5
mm, working length 8 cm
Scissors delicate standard model, blade length 8 mm,
01 set
50000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 195 -
working length 8 cm
Malleus Nipper, extra delicate, upbiting, width 0.8
mm, working length 8 cm
Ear Forceps extra delicate, oval cupped jaws, 0.6
mm, working length 8 cm
Ear Forceps extra delicate, oval cupped jaws, 0.9
mm, working length 8 cm
Perforator, 16 cm,diameter: 0.4 mm.
Perforator, 16 cm,diameter: 0.6 mm.
Perforator, length 16 cm, diameter 0.8 mm
Footplate burr
Measuring Rod, length 16 cm, Marker pins at 3 mm,
4 mm, 5 mm
Holding Forceps, for holding Stapes and Total
Prostheses, length 13.5 cm
Crimping Forceps for Total Prosthesis, length 10.5 cm
Scissors, for Total Prostheses, length 11 cm
Micro Hook, 2.5 mm, 45°, length 16 cm
Diamond Straight Shaft Burr, length 7 cm, Diameter
1.4 mm
Needle. 16.5 cm, light curve.
Seeker, ball end angled 45°, 15.5 cm, size 3.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 196 -
Suction Cannula, angular, LUER- Lock, working length
6 cm, O.D. 0.7 mm- 2 in number
Suction Cannula, angular, LUER Lock, working length
6 cm, O.D.: 1.0 mm- 2 in number
Suction Cannula, angular, LUER- Lock, working length
6 cm, 1.3 mm- 2 in number
Suction Cannula, angular, LUER- Lock, working length
6 cm, O.D.: 1.5 mm- 2 in number
Suction Cannula, angular, LUER- Lock, working length
6 cm, O.D.: 2.0 mm- 2 in number
Adaptor, for suction cannulas- 2 in number
Curette, large, spoon sizes 2 x 3.2 mm and 1.6 x 2.6
mm, length 15 cm
Curette, small, spoon sizes 1 x 1.6 mm and 1.3 x 2 mm, length 15
10 ADENO-TONSILLECTOMY
ADENO-TONSILLECTOMY 1.BoyleDevis mouth gag- 1 (with full set of tongue blades) 2.Draffin Bipod- 2such 3.Magauran plate-1such 4. Tonsil holding forcep-1such 5. Tonsillar knife with dissector - 1such 6.Mollison’s blunt tonsillar dissector and anterior pillar retractor-1such 7.Serrated tonsillar dissector and anterior pillar retractor- 1such 8.Long straight tonsil hemostatic forceps- 1such 9. Naegus artery replacement forcep- 1such 10.Naegus ligature slipper and knot tier- 1such 11. Eve’s tonsillar snare- 1such 12. Long dissecting scissor- straight- 1such 13.Yankauer’s oral suction- 1such 14. St. clair thomson’s adenoid curette with cage- 3 sizes- 1each
01 set
200.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 197 -
15. Long tooth forcep- 1such 16. Quinsy forcep- 1such
11 SEPTO-RHINOPLASTY
SEPTO-RHINOPLASTY
1. Thudicum’s nasal speculum- 3 sizes- 1 each
2. St. Clair thomson’s long bladed nasal speculum- 3 sizes- 1 each
3. Killian’s self retaining nasal speculum- 2
4. Freer’smucoperichondrium elevator-2
5. Luc’s forceps- 2 sizes- 1 each
6. Killian’s nasal gouge- 1such
7. Tilley’s antral Harpoon-1such
8. Tilley’s antral trocar and cannula-1such
9. Tilley’s Forcep- 1 such
10. Turbinectomy scissors- 1 such
11. Walsham’sforcep- 1 such
12. Asch’s forcep- 1 such
13. 2mm osteotome-1 such
14. 2mm osteotome with guard-1 such
15. 10mm osteotome-1 such
16. 10mm osteotome with gurad-1 such
17. Mallet-1 such
18. Cartilage scissor-1 such
01 set
400.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 198 -
19. Aufritch retractor-1 such
20. Killian’s ala retractor-1 such
21. Push rasp-1 such
22. Pull rasp-1 such
23. Joseph saw-1 such
12 MICROLARYNGOSCOPY AND MICROLARYNGEAL SURGERY
MICROLARYNGOSCOPY AND MICROLARYNGEAL SURGERY 1. Kleinsasser’smicrolaryngoscope- 1such
2. Anterior commisure laryngoscope- 1 such
3. Light cable for laryngoscope-2
4. Riecker’s chest holder
5. Microlaryngeal cup forceps- straight, right turn, left
turn, up turn- 1each
6. Microlaryngeal alligator forceps- 2
7. Microlaryngeal scissors- straight, right turn, left turn- 1
each
8. Microlaryngeal blunt dissector with handle- 1 such
9. Microlaryngeal knife with handle- 1such
10. Vocal cord retractor with handle-1 such
11. Microlaryngeal suction- 1 such
12. Microlaryngeal suction with diathermy- 1such
01 set
400.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 199 -
13 GENERAL INSTRUMENTS
GENERAL INSTRUMENTS
1. AdsonTooth forceps- (5”)-4 such
2. AdsonNontooth forceps- (5”)-4 such
3. Needle holder- (6”/5”/4”)- 6 each
4. Curved needle holder-( 4”)- 4
5. Mosquito Artery forceps- curved(4”)- 24
6. Medium artery forceps-curved(5”/4”)- 6 each
7. Large artery forceps- curved(7”)- 6
8. Right angle artery forceps- large/medium(7”)- 4
9. Kocher’s artery forceps(6”)- 4
10. Sinus forceps-2
11. Kocher’s gland holding forceps(6”)- 2
12. Babcock’s gland holding forceps(6”)- 6
13. Alle’s tissue holding forceps(5”)- 12
14. Tissue cutting scissors- straight/curved(5”)- 2 each
15. Medium dissecting scissors- curved(6”)-4
16. Small dissecting scissors- curved(4”)- 4
17. Langenberg’s retractor- 4
18. Metal suction cannula- 3 sizes(
2.5mm/3mm/4mm)- 4 each
01 set
200.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 200 -
19. Humpy’s knife- 1
20. Malleable sinus probe-2
21. Towel clip- 24
22. Kidney dish( 6”/8”)- 4 each
23. Sponge Holding Forceps (8”)-6
24. Catspaw- 4 pair
25. Gallipot-6
26. Tilley’s Forceps- 4
27. Hartman’s forcep-4
28. Chettle forcep-6
14.
High Speed Microdebrider system for Nasal Endoscopic Surgeries, consisting of :-
Main Console
1. The system should be suitable for wide variety of procedures ranging from Rhinology, Other transnasal procedures, Otology/ Neuro otology / Nasopharyngeal / laryngeal / tracheal / bronchial/ and hand piece for Adenoid specific application.
2. Should have large Touch screen monitor. The various parameters should be able to adjust either from touch screen panel or from the multifunction foot switch.
1pc
10000
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 201 -
3. Should be able to connect multiple hand pieces at a time like debrider hand pieces (Up to 5000 RPM in Oscillating mode & 12000 RPM in Forward mode), low speed Otology drills (Up to 16000 RPM) and High speed Otology drills (Up to 80000 RPM).
4. Should have inbuilt pumps each for Irrigation and Cooling.
5. Should have multifunction ergonomically designed foot control with
light emission for easy identification.
6. Should be able to control Speed / Mode, Forward / Reverse toggle, Active hand piece change from the Foot control itself.
7. Should have option for remote control Irrigation to operate from sterile
area.
8. Should have in built Lens cleaning system.
9. Should have 0 Degree, 30 Degree, 45 Degree & 70 Degree endoscope sheath compatibility for Automatic Lens cleaning system.
10. Should have provision to connect facial nerve monitor with the
Otology drill.
11. Main Console should have an option to operate manual foot paddle from console itself in case the foot paddle are not working.
12. Should have the provision to mount the console on various sizes of IV pole.
Hand piece:
1. Should be compatible with main console.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 202 -
2. Should be able work up to the speed of 12000 RPM in forward rotation and 5000RPM in oscillation mode.
3. Should have finger tip control to rotate only the tip of the blade up to 360 deg.
4. Should have straight suction path to reduce clogging and allow efficient tissue removal.
5. Should have integrated blade locking system to lock the blade tip rotation.
6. Should have integrated side grooves and cable clips to provide better tubing management.
7. Should have Titanium body to avoid rusting.
8. Should be able to operate 120 Degree curved blade for Maxillary Sinus Application.
9. Should be able to operate Diamond & Cutting burs for DCR Surgeries.
10. Should have provision to operate Inferior Turbinate blade for Turbinoplasty and Adenoid blade Adenoidectomy.
11. Should be compatible with Frontal Trephination System. Microdebrider blades and burrs
1) Straight Blade 0 Degree 4 mm- 01 pc. 2) 40 Degree Curved Blade 4 mm 01 pc. 3) 60 Degree Curved Blade 4 mm 01 pc. 4) 120 Degree Curved Blade 3.5 mm 01 pc. 5) Inferior Turbinate Blade 2.9 mm 01 pc. 6) 40 Degree Adenoid Blade 4 mm 01 pc. 7) Tonsillectomy Blade 4 mm 01 pc.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 203 -
8) High Speed Diamond DCR Bur 2.5 mm 03 pcs. 9) Tapered Diamond Bur 4 mm 01 pc. 10) Laryngeal Blade 2.9 mm 22.5 cm Long 01 pc.
High Speed Otology Drill (Motor) 1) Coolant Tubing 02 pcs. 2) 7.5 cm Straight & Angled Attachment 01 pc. Each 3) 1 mm to 7 mm Cutting Bur 01 pc. Each 4) 1 mm to 7 mm Diamond Bur 01 pc. Each
Low Speed Otology Drill (Motor) 1) Crura Saw 0.75 mm 01 pc. 2) Perforator 0.5 mm 01 pc. 3) 0.6 mm to 0.8 mm Diamond Burr 01 pc. Each
Automatic Lens Cleaning System 1) 0 Degree Endoscopic Sheath 05 pcs. 2) 30 Degree Endoscopic Sheath 05 pcs. 3) 45 Degree Endoscopic Sheath 05 pcs. 4) 70 Degree Endoscopic Sheath 05 pcs. 5) Finger Switch 01 pc.
ALL THE ABOVE EQUIPMENTS SHOULD BE CE AND FDA & ISO APPROVED AND FROM SINGLE MANUFACTURER COMPANY NO LOCAL ACCESSORIES WOULD BE ACCEPTABLE. NO ECONOMY CLASS, E CLASS OR E LINE MODEL SHOULD BE ACCEPTED.
SL. NO.
NAME OF EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
REQUIREMENTS /QTY(FOR ESI-PGIMSR, JOKA)
EMD VALUE
QUOTED (YES/NO)
DEPARTMENT OF MICROBIOLOGY ESI-PGIMSR, JOKA 1 Real time
Polymerase Chain Reaction (PCR) System
SPECIFICATIONS Real time Polymerase Chain Reaction (PCR) System with Qualitative and Quantitative detection
01pc 36000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 204 -
with Qualitative and Quantitative detection
a. The Real time PCR System must have International and/or National quality and safety certification, e.g. CE and/or UL/cUL and/or ISI certified and IVD certified.
b. The Real time PCR System should be an open platform system, and must have provisions for using third party kits and reagents for the molecular diagnosis of infectious diseases.
c. The Real time PCR System must at least have the following In vitro Diagnostics approved kits available from the same manufacturer which are pre-validated on the quoted model :
i. Human Immunodeficiency virus
ii. Hepatitis B virus
iii. Hepatitis C virus
iv. Cytomegalo virus
v. Ebstein Barr virus
vi. Herpes Simplex virus
vii. Mycobacterium tuberculosis
d. There should be provision for using the system as simple Thermocycler for qualitative molecular detection of infectious diseases.
e. The Automated Real time PCR System should be accompanied with a desktop or laptop computer and printer system (required for the functioning and data storage and printing of
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 205 -
reports) with original operating system and free software support for the lifetime of the machine.
f. The Automated Real time PCR System should have already been installed in at least two (02) reputed Academic and / or Medical institutions and / or reputed accredited diagnostic laboratories in the Eastern region of India.
g. Technical Parameters:
Features Specification Thermal Cycler Mechanism
Air based heating and cooling mechanism for maximum uniformity with even heating and cooling.
Sample Layout Should be flexible for the tube input volumes having capability of running 96 or more samples.
Additional Intra-assay Centrifugation
Any additionalstep of centrifugation of tubes while performing the assay should NOT be there.
Uniformity
Should have uniform temperature distribution. Should maintain iso-optical detection in all wells for maximum uniformity. Temperature uniformity should be in the range of ±0.02oC.
Chemistries Should come with standard chemistries for gene expression, quantification, mutation scanning, genotyping and methylation studies.
Temp Range Up to 99℃ Light Source
Different LED’s with 5 different wavelengths with minimum cross-talks (one LED with one wavelength). The assay should not be based on onesingle wavelength of light.Should be able to detect all wells equally with same optical path length.
Light Source Lifespan
Warranty on light source for minimum of 10 years.
Excitation Should be minimum 5 plex. Should have capability of further
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 206 -
Plexing increasing the multiplexing beyond 5-Plex in singe tube. Dynamic Range Should be of 10 orders of magnitude Reaction Volume
10 µl-100 µl
Passive Reference Required?
Should NOT require any passive reference dye
Tube Format Should be able to mark the caps of the tubes. Should have flexible tube format. NOT CAPILLARIES.
Software Unlimited user Software license with maximum feature should come absolutely free of cost for the life of the machine.
In vitro diagnostics Approval
Real Time In vitro Diagnostics approved validated kits on quoted model as mentioned above should be available with instrument manufacturer. Instrument should also be In vitro diagnostics certified for use in diagnostic laboratory.
2 Automated (Multicapillary
) Capillary Electrophoresis
System
Automated (Multicapillary) Capillary Electrophoresis System:
a. The automated multicapillary electrophoresis System must have International and/or National quality and safety certification, e.g. CE and/or UL/cUL and/or IVD certified and/or ISI certified.
b. It should be a fully automated capillary electrophoresis system for fragments of DNA and RNA, which is based on high throughput nucleic acid analysis of at least 60 samples in one run within 30 minutes.
c. System should comewithReady-to-rungelcartridgesallowing samplesto be
01pc 36000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 207 -
analyzed replacing laborintensiveagarosegel electrophoresiseliminating the need for handling carcinogenic compounds likeethidium bromide.
d. Post PCR samples should be directly analyzed for fragment analysis using the system without prior purification of samples.
e. The instrument should be usable for genotyping, restriction digestion, qualitative monoplex or multiplex PCR, PCR-based cDNA library screening and other routine molecular biology applications.
f. System should work with an input volume of equal or less than 1 μl offering a high sensitivity ofupto 1000pg.
g. Instrument should come with user-friendly analysis software including an accompanying Laptop with original operating system and free software support and upgradation for the lifetime of the instrument.
h. The Real time monitoring of the sample analysis should be visible on the computer screen.
i. Operating temperature : 20-28°C
j. Excitation Source : light-emitting diode (LED)
k. Detection Source : Photomultiplier Tube
l. The instrument must eliminate the need for a
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 208 -
separate Gel Doc system after Electrophoresis.
m. The instrument should be able to provide Standardized and accurate analysis with a resolution down to 5 base pairs.
3 Biosafety
Cabinet: Class II Type A2
with accessories
Biosafety Cabinet: Class II Type A2 with accessories:
a. The Biosafety cabinets must have International and/or National quality and safety certification, e.g. CE and/orUL/cUL-listed and/or ISI certified.
b. Class II Type A2 biological safety cabinet with factory installed programmable UV light for surface disinfection.
c. Standard 4 ft model: Exterior dimension preferably not to exceed, 52 X 64 X 33 inch (W X H X D) ± 10%
d. Double Blower system; Brushless DC motor technology for saving energy consumption.
e. SmartFlow Indicator, with Digital airflow verification technology (The balance of downflow and inflow should control the cleanliness and containment – preventing room contamination from reaching the BSC work surface and keeping any biological hazards in the BSC work area from escaping out the front opening.)
f. Ergonomic design with 10° Slopped front,
02pc 10000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 209 -
preferably with Armrest.
g. Supply / exhaust air filter specification: H14 HEPA or better. The HEPA or ULPA filters shall capture contamination in the room air and in air drawn from the BSC work area to create clean downflow and the exhaust air.
h. Service Valves (through side walled access ports)
i. Receptacles in the Rear Wall: load capacity of up to 5A
j. Smart Clean front window Design easily lowered for cleaning of inner surface & protects operator.
k. The provider must provide at least two (2) ergonomically designed compatible, height adjustable hydraulic or screw turn low back support revolving stools with each Biosafety cabinets for user operations.
4 Micropipettes
(0.5-10μL set, 10-100μL set, 100-1000μL set) with disposable Tips and autoclavable boxes.
Micropipettes (0.5-10μL set, 10-100μL set, 100-1000μL set) with disposable Tips and autoclavable boxes.
a. Each set shall contain 3 adjustable volume Fully autoclavablemicro pipettes of the following ranges:
i. 0.5 - 10μl
ii. 10 - 100μl
02 sets 2000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 210 -
iii. 100 - 1000μl
b. Six (06) reusable T.I.P.S boxes with 96 Pipette tips in each boxes; Three pairs of boxes are to be compatible to the above three different sets of Micro pipettes.
c. The boxes and the tips should also be fully autoclavable.
d. The micropipettes should have Spring Loaded Tip Cone for improved ergonomics which should be tight fit to the tip.
e. Adjustment opening to adjust the pipettes to a specific liquid and volume.
f. Control Button with very low operating force, positioned for perfect ergonomics.
g. Ejector withvery low operating force, positioned for perfect ergonomics.
h. Volume Display: 4 Digits with magnification.
i. There should be quick connection clip toremove lower part easily.
5 Vortex Mixer Vortex Mixer (with accessories):
a. Digital vortex Mixer for Molecular Biology Applications with International and/or National quality and safety certification, e.g. CE and/orUL/cUL-listed and/or ISI certified.
b. Should be ideal for applications demanding
01pc 1000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 211 -
repeatable results.
c. Variable speed control at least from 500 to 3000 rpm. A higher range is allowable.
d. Touch keypad controls and LED display for speed and time. Not merely Analog controls, for ensuring reproducibility in molecular diagnostics.
e. Microprocessor control to maintain set speed for consistent mixing.
f. Timer displays elapsed time; auto shutoff at end of cycle.
g. Should be allowable to be used in 220 to 240 V and 50/60 Hz electrical supply.
h. Should have robust durable electrical connectivity conforming to standard Indian sockets.
i. The following accessories have to be quoted along with the vortex mixer, which can be steadily fitted and connected with the mixer:
I. 24 to48 numbers vertical Microtube Holder for mixing 0.25 to 2.0mL microcentrifuge tubes / PCR tubes or high-density foam inserts to accommodate 24 to 60 microtubes.
II. Vertical tube holder for mixing at least four (04) 50 ml tubes together.
III. Vertical tube holder for mixing at least
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 212 -
four (04) 5 ml (09 to 13 mm diameter) tubes together.
6 Molecular
grade DNAse RNAse free Water Purification System
Molecular grade DNAse RNAse free Water Purification System
a. The entire water purification system should be equipped with three part equipments, quoted together by the same bidder, including:
i. A Pretreatment Water filtration reverse osmosis system
ii. A Pretreatment Iron, hardness and particleremoval system
iii. A Molecular grade Water purification system proper.
b. The Pretreatment Water filtration reverse osmosis system (i) and the Pretreatment Iron, hardness and particle removal system (ii) must have National and/or International quality and safety certification, e.g. ISI and/or CE and/or UL/cUL certified.
c. The Molecular grade Water purification Systemproper (iii) must have International and/or National quality and safety certification, e.g. CE and/or UL/cUL and/or ISI certified.
d. The Pretreatment Water filtration reverse osmosis system (i) and the Pretreatment Iron, hardness and particle removal system(ii) should
01pc 30000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 213 -
be able to be connected in series connection, directly from the pipeline ground-water feed and should be able to deliver output water quality compliant to the acceptable limit of the feed water of the Molecular grade Water purification system proper(iii) as mentioned below in tight fitted series connection.
e. The Pretreatment Water filtration reverse osmosis system (i) and the Pretreatment Iron, hardness and particle removal system(ii) should be able to deliver at least 15litres of water per hour to the Molecular grade Water purification system proper(iii).
f. The Pretreatment Water filtration reverse osmosis system (i) and the Pretreatment Iron, hardness and particle removal system (ii) should at least be equipped with the following technology:
i. * 2 Stage pretreatment system
ii. * 5 micron and 1 micron wrapped type depth filter
iii. * 3 Pressure gauges
iv. * Less than 50 Db noise levels
v. * Automatic low/high pressure cut off
vi. * DC pump with 0-2 pressure at 120L /hr
vii. * Inlet screen filter to DC pump
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 214 -
viii. * Optional filters : 0.5 micron
ix. * Optional filters : Activated carbon
g. The Molecular grade Water purification system proper (iii) should be able to deliver the required quality of pure and ultrapure water from its feed water acceptance level of:
1) 2000micro Siemens conductivity
2) Fouling Index (SDI) < 12
3) Total Chlorine < 3 ppm and
4) TOC <2000 ppb
h. The Molecular grade Water purification system proper (iii) should beable to deliver reagent Grade Type 2 water (pure quality) and Reagent grade Type 1 standard water (ultrapure quality) as defined by standard international quality control organizations like ISO:3696 standards and / or Clinical and Laboratory Standards Institute-Clinical Laboratory Reagent Water standards and / or ASTM standards.
i. The Molecular grade Water purification system proper (iii) should have two different points of delivery. It should be able to deliver through one point of delivery, reagent Grade Type 2 water (pure quality) bacteria and pyrogen free water, which may be used for basic laboratory needs, such as buffer and reagent preparation,
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 215 -
microbiology media preparation, histology and rinsing of glassware of the following grade:
Type 2 Pure grade Water outlet
Parameter Value
Resistivity, Mega Ω @ 25 °C 10 – 15
Programmable water flow rate / minutes ̴01
TOC, ppb (μg/l) < 30
Bacteria, cfu/ml < 10, reducible to < 0.1 *
Particulates > 0.22 μm, Particulates/ml < 1 *
Silica rejection 99.9%
Pyrogens (endotoxins), EU/ml < 0.001 **
RNases, ng/ml < 0.01 **
DNases, pg/μl < 4 **
(*) With special filter for microbiological grade water
(**) With special filter for molecular grade water
j. The Type 2 water (pure quality) production system / chamber of the Molecular grade Water purification system proper (iii) should be enabled at least with the following
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 216 -
technologies:
1) Pretreatment cartridge
2) Reverse Osmosis with a high flux polyamide membranewith 94- 99% ion rejection backed by Pump with temperature feedback mechanism so that the flow rate should be 3 ltr/hr at room temperature .
3) Electro Deionization with auto regeneration by electric current, eliminating the need for chemical regeneration or replacement of DI resin cartridges with carbon beads at cathode of the EDI module to prevent scaling inside of the module
4) Activated Carbon cartridge
5) UV lamp with 254 nm Wave lengthbefore entering the tank
6) Recovery loop with capillary tube and diaphragm valve to minimize water wastage
7) Carbon beads at cathode of the EDI module to prevent scaling of the module
8) Permeate divert valve which will divert low quality water to the drain
9) Coaxial resistivity cell with a flow
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 217 -
through design and a cell constant of 0.01cm-1
10) Display both compensated and non-compensated temperature accurate within ±0.1°C.
11) The reservoir tankshould be blow moulded, cylindrical PE reservoir with a conical bottom and opaque walls with a minimum of 30 litres capacity.
12) Sensor rod float switch, programmed to have high and low level cut-off based on water level in the tank.
13) The reservoir tank should possess a tank vent filter made of soda lime, activated carbon and 0.22 micron hydrophobic membrane to trap contaminants present in atmospheric air.
14) The Point of Delivery units should be of adjustable height and rotating arm-adjustable to any glassware.
15) There should be multicolour monitor displaying resistivity, TOC, level of water in reservoir, volume dispensed etc.
k. The Molecular grade Water purification system proper (iii) should also be able to deliver
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 218 -
through a different point of delivery, Type 1 water (ultrapure) DNA, RNA, DNAse, RNAse free water for molecular biological applications, suitable for genomics applications (quality at least equivalent to DEPC-treated water) and cell culture of the following grade:
Type 1 Ultrapure Molecular grade Water outlet
Parameter Value
Resistivity, Mega Ω @ 25 °C Around 18.2 (> 18)
Programmable water flow rate / minutes ̴ 0.05 to 2
TOC, ppb (μg/l) < 5
Bacteria, cfu/ml < 0.1 *
Particulates > 0.22 μm, Particulates/ml < 1 *
Pyrogens (endotoxins), EU/ml < 0.001 **
RNases, ng/ml < 0.01 **
DNases, pg/μl < 4 **
(*) With special filter for microbiological grade water
(**) With special filter for molecular grade water
l. The Type 1 water (pure quality) production system / chamber of the Molecular grade Water
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 219 -
purification system proper (iii) should be enabled at least with the following technologies:
1) Water source feed should be a closed connection from the Type 2 water reservoir tank eliminating any possibilities of contamination.
2) Re-filtration through two stage mixed bed ion exchange and activated carbon cartridge to remove ionic and organic contaminants to trace levels.
3) Low pressure mercury vapour lamp made of quartz with 185/254 nm dual wavelength UV lamp.
4) Should contain high-precision resistivity meters with following features-
a. Coaxial electrodes to warrant cell constant stability.
b. Low cell constant (0.01 cm-1) for optimum measurement accuracy of low ionic contamination
c. Temperature measurement with a 0.1 °C resolution for proper report of temperature compensated resistivity
5) Should contain a built in TOC
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 220 -
monitorwith a Quartz celland UV lamp which should accurately measure online TOC from 1- 999 ppb.
6) To prevent deterioration of water quality during periods of non-use, the ultrapure water system will be able to recirculate water to maintain high water quality.
7) Special filter packs for ultrafiltration and DNAse RNAse removal at the point of delivery or dispensing unit.
8) Controllable & user login password protected dispensing unit for Type 1 ultrapure water with ultrafiltration cartridge at the collection end with Log Reduction Value between 5.6 and 7.65 over challenge range of 220 and 22000 Eu / mL.
m. To avoid maintenance errors and to improve traceability, the internal primary consumable water purification cartridges should have a built-in RFID tag.
n. To comply with Standard requirements, the resistivity meter shall be able to display the non-temperature-compensated resistivity.
7 Automatic
Electronic Automatic Electronic Laboratory Balance 01pc 400.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 221 -
Laboratory Balance
a. The Electronic Laboratory balance should have International and/or National quality and safety certification, e.g. CE and/or UL/cUL-listed and/or ISI certified.
b. The maximum weighing capacity should be 500 grams with a tare range of 0 to 500 gm. A higher range is allowable.
c. The minimum readability should be 0.1 mg differences.
d. The balance should be fitted with durable electrical connectivity compatible to Indian electrical standard sockets and operable in 220 to 240 V and 50/60 Hz electrical supply.
e. The balance plate should be covered with High draft shield fibre / glass covers with mounted front and rear fibre / glass panels, including sliding doors.
f. The balance should have digital electronic display and preferably soft touch controls for Power, Tare and calibration options.
8 Carbon dioxide
(CO2) Incubator
Carbon dioxide (CO2) Incubator: Technical specifications
1. CO2 Incubator with work chamber volume approx. 150 to 190 liters / 5.3 to 6.5 cu. ft (± 10%).
2. Air jacketed heating system with temperature
01pc 400.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 222 -
control by microprocessor. 3. Temperature range from ambient +3 o C to + 55
o C. 4. Temp. Deviation with respect to time is + 0.1K. 5. Continuous air Contamination prevention by in
chamber Class 100 HEPA Air Filtration. 6. Event based Decontamination with in-built moist
heat High temperature cycle, with ease operability, preferably single switch operation of sterilization cycle. The built-in automatic decontamination facility to remove bacteria, fungi, spores, mycoplasma etc without removing sensor, fan or any other fitting. The system should employ automatic decontamination routine at moist heat of 90o C or equivalent.
7. CO2 control by Microprocessor based & by heat resistant Thermal Conductivity detector to withstand heat of decontamination.
8. CO2 range 0 to 20% or better and CO2 accuracy + 0.1% by volume.
9. System should have Interactive Control with Touch screen for rapid access of important information for each critical parameter in the Incubator.
10. Humidity range should be 95% rH or higher. Recovery time for humidity loss during door opening for 30 seconds upto 96% rH of initial value should not be more than 20 minutes.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 223 -
11. At least 3 nos. stainless steel perforated shelves should be supplied.
12. It should be supplied with access port to allow any cable, plug or tubing to be easily inserted into or out of the chamber.
13. Interior chamber should be made of stainless steel with electropolish finishing of inner surface with rounded corners on all sides for easy cleaning. The shelves and fan impeller also should be made of stainless steel and should not have nuts or bolts for shelf supports to reduce the scope of growth of contamination. No plastic parts should be inside to avoid VOC.
14. Built-in audible and visual water level alarm should be available when the water reservoir (water tray less system to avoid contamination) needs to be refilled to ensure a constant high level of humidity and to prevent cultures from drying out.
15. Independent electronic over temperature protection with separate sensor should be available for sample protection.
16. The system should have large digital display for both temp. & CO2 simultaneously.
17. System should have at least two doors, one main door and one glass doors.
18. Suitable for 230V, single phase 50Hz operation. 19. Suitable servo voltage stabilizer with high
voltage low voltage cut off circuit, auto reset with delay timer and spike eliminator etc.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 224 -
20. Double stage CO2 pressure regulator with stainless steel diaphragm.
21. 18Kg CO2 Cylinder filled with CO2 gas 99.5% or better purity required for operation of CO2 Incubator, along with cost of refill should also be quoted.
9 Hot air oven
Hot air oven Technical specifications
1. Should be CE certified internationally quality control approved instrument.
2. Corrosion-resistant galvanized steel chambers. 3. Digital display and timer facility 4. Upper temperature cut off ( automatic) 5. Microprocessor temperature control. 6. At least 2 tilt proof wire-mesh shelves 7. Chambers and heating elements should made of
corrosion resistant steel. 8. Chambers should be easy to clean. 9. Volume minimum 75 litres 10. Operating temperatures from 50° to 250°C. 11. Easy to use, microprocessor-controlled touch
button operation.
02 pcs 2500.00
10 Automatic
Evacuation-
replacement
system for the
Automatic Evacuation-replacement system for the culture of anaerobes, capnophiles, and microaerophile:
1. Automatic evacuation-replacement system
01pc 4000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 225 -
culture of
anaerobes,
capnophiles,
and
microaerophile
with at least One to Three (1-3) gas inlet connections: CO2, H2, and O2 and One to Four (1-4) jar outlet connections.
2. The System should be internationally quality control certified, e.g. CE / ISO / ISI certified.
3. The System should have pre-programmed functions with easy to use, preferably single touch key operations for preparing Anaerobic, Microaerophilic and Capnophilic culture conditions.
4. Following associated transparent Polymethylmethacrylaat (PMMA) jars with Gas tight fit by means of a snap-shut adaptor on the lid of the jar and stainless steel petri dish holders of the following dimensions are required to be supplied along with:
a. Two (02) equivalent jars: Diameter and height: Ø =123mm, h=240mm (±10%) Volume: 2.75 L (±10%) Contents: 1 stack of 12 Petri dishes with Ø 9-10cm (±10%)
b. Two (02) numbers of Petridish holders: Petri dish holder for 12 Petri dishes with Ø 9/10cm made of stainless steel
c. Two (02) equivalent jars: Diameter and height: Ø =175mm,
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 226 -
h=240mm (±10%) Volume: 5.65 L (±10%) Contents: 1 stack of 12 Petri dishes with Ø 14.5cm (±10%)
d. Two (02) numbers of Petridish holders: Petri dish holder for 10 Petri dishes with Ø 14.5cm made of stainless steel
e. One (01) number micro well plate holder: Holder for micro-well plates of 9 x 13 cm, made of stainless steel
f. One (01) equivalent jars: Diameter and height: Ø =230mm, h=240mm (±10%) Volume: 9.66 L (±10%) Contents: 3 stack of 12 Petri dishes with Ø 10cm (±10%)
g. One (01) number of Petridish holder: Petri dish holder for 3 x 12 Petri dishes with Ø 9/10cm, made of stainless steel, to be fitted in the height of 240 mm jar.
5. Palladium coated catalyst pouches ideal for the big jars:
a. SIX (06) Sets of catalysts, ideal for the big size jars are to be provided along with, which can be easily re-
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 227 -
used by reactivation in Hot air oven. 6. Reducing valve: To reduce the pressure in
the gas cylinder to the system working pressure, a reducing valve has to be provided with the gas cylinder(s). This must be a 2-step reducing valve, preferably calibrated and supplied by the same manufacturer, which has manufactured the Automated evacuation-replacement system. The working pressure should be adjustable to 1.8 Bar or 26 psi.
7. Option of user programming function (free user programming of oxygen level, gas mixture and evacuation level) should be there.
8. Option for Preprogrammed recipe for oxygen level, gas mixture and evacuation level should be there.
9. The bidder should also quote for 18Kg CO2, H2, and O2 Cylinders filled with CO2, H2, and O2 gases 99.5% or better purity required for operation, along with cost of refill should also be quoted.
11 Hot air sterilizer, 160ºC
Power supply: 440 V,AC, 3 Phase Material of Construction: SS 304 Motor : Supply: 0.5 HP: 1440 RPM: 1-0, 230 V AC: 50 Hz Exhaust: 2 HP 2800 RPM Blower (Impeller) : Supply: 210 x 117 Wmm Exhaust : ----
2 1000
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 228 -
Dimensions: (W x D X H): 1060 x 1040 x 2150(Approximate) Bioclean work space: 877 x 660 x 610 Filters (W x D X H): Pre filter: size : 305 x 380 x 45 Fresh Air Filter: Type: EU-6 Intermediate: Size: 915 x 610 x 45 Type: EU-13 Final Filter: Size: 915 x 610 x 75 (ANTIMICROBIAL) Type: EU-13 Intermediate: Size: 915 x 610 x 100 (ANTIMICROBIAL) Type: EU-13 Exhaust filter: Size: 915 x 457 x 100 Type: EU-13 Differential pressure gauge : Magnehelic pressure gauge Across HEPA filter wrt. ambient: 0-25 mm Across work space wrt. ambient: 0-10 mm Illumination: UV light: 1.5' L & 30W FLU light: 1.5' L & 20W Special features: Virus burnout system
12 Venereal Diseases
Research
Laboratory (VDRL)
shaker
Bench top, 12” x 12” platform size Built in timer 0-15 minutes Maximum speed of 180 rpm Built in speed regulator
2 100
13 Macintosh fields
anaerobic jar
Anaerobic system
Supplied with transparent unbreakable poly carbonate jar of approximately 3.5 lt capacity
2 50
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 229 -
Sturdy aluminum lid clamp and sealing ring with built in safety features
Pressure valve with safety valve and two way pressure guage
Anaerobic indicator tablet
Anaerobic gas pack 3.5 lt
Petri plate carrier
14 Dissecting
microscope
Eye piece 10 x Adjustable mirror
2 2000
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 230 -
SL. NO.
NAME OF EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
REQUIREMENTS /QTY(FOR ESI-PGIMSR, JOKA)
EMD VALUE
QUOTED (YES/NO)
DEPARTMENT OF DENTAL
1. Chair Unit Specifications of dental Equipments /Instruments of newly Developed upcoming Dental Surgery
1. Chair Unit : Electrically operated programmable
chair, both hand and foot control operation, over
hanging delivery unit, spittoon with auto flush,
High and low intensity operating light,
motorized suction (with auto drain) X-ray viewer,
three way syringe, zero backache doctor’s stool.
a) Light cure unit : Light emitting diode (LED)
b) Air rotar with Controlled box : along with
(i) Air compressor: Minimum 1.5 HP, Oil free
(ii) Air rotor Hand piece: 2 to 3 Lakhs RPM
01 each
10000.00
2 Dental Electro
Surgery Unit with
multiple tips
Dental Electro Surgery Unit with multiple tips
01 pc 1000.00
3 Automatic dental X-
ray film developer –
Automatic dental X-ray film developer –IOPA (Intra oral Peri
apical radiograph) automatic processor
01 pc 1000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 231 -
IOPA (Intra oral Peri
apical radiograph)
automatic processor
4 Lead apron for use
along with dental X-
ray unit
Lead apron for use along with dental X-ray unit
01 pc 100.00
5 Electric High Speed
Micro motor
Electric High Speed Micro motor of about 35000 RPM with reverse forward switch, foot control, with Both straight and contra angle Hand Piece.
01 pc 5000.00
6 Ultrasonic Scalar Ultrasonic Scalar : with four tips
02 pcs 100.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 232 -
SL. NO.
NAME OF EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
REQUIREMENTS /QTY(FOR ESI-PGIMSR, JOKA)
EMD VALUE
QUOTED (YES/NO)
DEPARTMENT. OF RADIOLOGY ESI-PGIMSR, JOKA
1 500 MA X-RAY
MACHINE Technical specification of 500 MA X-RAY MACHINE
A 500 mA. Multipulse High frequency X-Ray machine for Radiography. RATINGS: 50KW High frequency X-Ray generator for radiography . Radiography Parameters: 35 to 125KVor150 KV Multi steps as many as possible Small Focus – 100 mA & 200 mA Large focus – 300mA, 400mA and 500mA mAs – 1.25 to 200 mAs in multiple steps as many as possible. Control: Floor or Wall mountable control panel, ON and OFF switches Automatic safety system to block unwanted exposure factors beyond tube ratings. Digital display of active KVP, mA and mAs. Hand switch with flexible long retractable cord. Compact durable soft touch keypad. Table or Vertical Bucky selection and table top radiography switch. Ready and X-Ray on switch with indications. Tube Unit: Rotating anode tube unit with dual focus x-ray tube insert. Anode Speed:- Minimum 2800 rpm. Focal spot:- Dual focus, Small focus:- 0.6mm to 1 mm Large focus:- 1.2mm to 2.00 mm Protection:- Totally thermal Protection. HV/HT cable compatible with X-ray tube.
01 set(against condemnation)
40000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 233 -
Motorized tube movement with all round tube angulation preferable Collimater: Manual light beam diaphragm. Tube Stand: Floor to ceiling stand and with counter balanced tube head 360 degree rotation (rotatable+/- 180 degree), tube rotation with column axis all round movement ( Longitudinal, Transversal, UP & Down), mounted on floor ceiling rails for convenient movement. Safety lock in case of wire shortage. Ceiling suspension tube preferable. Table: Motorized table with 6 way movement (table height adjustment) . Motorized bucky with grid ratio 8:1 (80 to 100 lines per inch). Stainless steel cassette tray with electromagnetic brakes. Stain free laminated table top. Operating Voltage: 400-440 volt AC 50 HZ. Three Phase. Chest Stand: Motorized or manual Vertical Bucky Stand with counter balanced. Head to Toe Vertical travel (455mm to 1900mm). Electromagnetic locking method (lock released when switch is pressed). Also separate Cassette holder attachment with the Vertical Bucky Stand for direct exposures. Accessories:- Compression Band, Hand Grip & foot step. Unit should have the AERB approval.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 234 -
DEPARTMENT OF PAEDIATRIC
1 NEONATAL
RESUSCITATION
UNIT WITH
WARMER
NEONATAL RESUSCITATION UNIT WITH WARMER:- NEONATAL RESUSCITATION UNIT (MICRO-COMPUTER CONTROLLED) WITH WARMER SPECFICATION:-
a) Controlled Resuscitation system. Oxygen
Administration facility, Low Pressure suction and
warming with infrared Radiant Heat Source.
b) Inline Manometer,
c) Oxygen Administration Facility: i) Oxygen Flow
control facility with flow meter (o to 15 lit/min).ii)
Oxygen Pressure Adjustment valve, iii) Humidifier
Bottle, iv) Facility to keep Oxygen cylinder, v)
Connecting hose for wall Outlet. vi) Silicon
Autocluvable Resuscitation Bag with 00 and 01 size
of Masks.
d) Slow Suction: This is a specially designed
electrically operated slow suction. Apart from
others, it is non-motorized slow suction. The
suction pressure can be adjusted as per
requirement.(0-110 mm Hg.)
e) Servo Control System to maintain an optimum skin
temperature.
02 pcs (against condemnation)
4000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 235 -
f) Precise cradle Temperature control.
g) Manual Warming Facility.
h) Stop Watch- additional Facility provided to note
down timings during monitoring various vital signs
of baby, e.g. temp. Heat rate, Respiration Rate.
i) Reminder Timer.
j) Apgar Timer with Birth Time Recorder.
k) a) Power Source: 230 +/- 10% volts. 50 Hz.
B) Control Method: Micro-Computer Controlled
intelligent proportionate Power Control.
c) Heater Capacity: 600 Watts.
d) Light Source: 60 watts bulb to examine babies.
e) Power Consumption: 850 watts.
m) Temperature Controller Specifications:- I. Skin Mode Control: From Body Temperature to 38 C.
II. Air Mode Control: From Room Temperature to 39 C. III. Resolution: 0.1 C. IV. Accuracy: +/- 0.2 C. n) Alarms: (Audio visual with auto Reset facility) Alarm Condition Message on Display
Skin + I.C. HI
Skin - I.C. LO
Air +1.5 C HI
Air - 3 C LO
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 236 -
Skin >38C OVER
Air<39C OVER Skin/Air Sensor Failure Fail Heating system Failure HEAT OFF o) Safety Cutoff; When Skin Temperature exceeds 38C. When Cradle Temperature exceeds 39C. p) Power Failure Alarm: Audio –visual. q) Distance between Heater source and Baby: 88 (34.5) r)Dimensions: Height X Width x Depth-cm (inch) 203 (80) X 63.5(25) X 100 (39.5) s) Baby Tray: Length 72 (28.3) x width 45 (17.7) t) Should have 1 drawer system attached with the equipment for storage facility. w) It should be in compliance with ISO 9001:2000. Should have Q.A. International Certification Limited.
2 DOUBLE SURFACE LED PHOTOTHERAPY
DOUBLE SURFACE LED PHOTOTHERAPY Specification:- Wide Effective Area.
Unit should have blue cool led light source with wave length of
450-460 nm.
Long Life->20,000 Hrs.
No UV / IR Radiation.
No Heat Generation.
Low Power consumption.
Negligible Maintenance Cost.
Light Weight & Compact.
Height and Angle Adjustment facility.
Mounted on Castor Wheels for Easy Mobility.
02 pcs(against condemnation)
2000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 237 -
Can be used in Conjunction with any make radiant Warmer.
Digital time Totalizer.
Irradiance> 60 u/W/cm2/nm.at 45 cm from the light source.
Wavelength 450-460 nm (peak 455 nm free of UV and IR
radiation.
Height adjustable from 1198+/-20 mm to 1680+/-20 mm
UNDER SURFACE SOURCE UNIT:
Unit should have blue cool led light source with wave length of
450-460 nm.
Free of UV/IR radiation.
Light intensity is variable from 7-60 um/nm/cm2.at a distance of
45 cm.
Infant care Trolley in Stainless Steel Specification:-
Mechanical Specification:-
Convenient working level with 6 mm thick imported acrylic
collapsible side support, accessible from all sides.
Acrylic Tray with Foam mattress. IV Pole & Facility to take X-
ray.
Head up /down facility.
Stand with separate Infant care trolley.
Mounted on 4” castor wheels for easy mobility.
Infant care Trolley with transparent acrylic bed and bubbles
mattress for baby. Fabrication in mild steel, baby bed area in
Stainless steel.
3 CPAP MACHINE SPECIFCATION OF CPAP MACHINE SYSTEM: Valve based continuous flow CPAP and IPPR. Bubbler based bubble CPAP. DISPLAYS: Digital and Analog Display of CPAP pressure in
02 pcs(against condemnation)
2000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 238 -
CPAP Mode. Continuous Digital display of Delivered pressure in IPPR Mode. ALARMS; CPAP High and low Alarms (Audio Visual)
PRESSURE GAUGE: -20 to 100 cm H2O
GAS MIXNG: Air-Oxygen Mixer using calibrated Rotameters.
AIR SOURCE: Inbuilt Air Compressor (Optional) (20 to 90
PSI).
O2 SOURCE: Inlet for Oxygen Gas (20 to 90 PSI).
POWER: 230V A.C. 50 Hz.
Asccessories: Warmidifier, Breathing Circuits(Disposable).
CPAP Interface, Nasal Prongs, Dummy Test Lung.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 239 -
SL. NO.
NAME OF EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
REQUIREMENTS /QTY(FOR ESI-PGIMSR, JOKA)
EMD VALUE
QUOTED (YES/NO)
Department of Biochemistry 1 SEMI AUTOMATED
BIOCHEMISTRY ANALYZER
SPECIFICATION FOR SEMI AUTOMATED BIOCHEMISTRY ANALYZER. I. Item : Semi Automated Biochemistry Analyzer with UPS 0.5 KVA. II. Analysis Option: a. Absorbance b. 1 point end linear & non linear. c. 2 point end linear & non linear. d. Rate linear & non linear. e. Immunoturbidimetry. OPTICAL SYSTEM III. Light Sources: Pre aligned Quartz halogen lamp. IV. Wave Length: Automatically Selectable narrow band interference quartz filter within wavelength of 340 -700 nm -- fixed seven or eight filters and two optional filters as per users choice. V. Measurement Time : Selectable. CUVETTE SYSTEM Cuvette : a. Flow cell Cuvette. b. External rectangular Cuvette. VII. Cuvette Temperature: Peltier control &
01 pc 6000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 240 -
programmable at 25˚C, 30˚C and 37˚C. VIII. Aspiration System: Motor driven pump. IX. Aspiration Volume: Programmable. X. Cuvette Blanking: Automatic. FUNCTIONS
XIII. Programmable Parameter: About 100 user defined test programs including routine biochemical parameters, enzymes, immunological markers, truly open system, selection through key- board. XIV. Calibration: Automatic against standard / calibration. XV. Quality control: a. 2 levels of control (at least) b. Levey - Jennings diagram. c. Manual entry of QC result. XVI. Memory Storage: a. Minimum 200 patients result. b. Calibration result. c. Quality control result for 01 month. XVII. Display: a. Graphic LCD. b. Display of reaction curve, absorbance, temperature. c. Display of result of real time. d. Graphical display of reaction time. e. Calibration curve graphical display. XVIII. Key board: a. Chemical and moisture prevented single touch alphanumeric membrane key panel.
OPERATOR INTERFACE
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 241 -
XIX. Printer: a. Built in thermal printer with full graphic facility. b. Parallel full page ink printer with formatting options. XX. Reporting format: a. Conventional b.SI unit(Optional/Interconvertible). XXI. Recalculation : Recalculation of result following modification of calibration, measurement timings and wavelength. XXII. Automatic Flagging: a. Absorbance and linearity cheek. b. Reagent stability. c. Substrate depletion. XXIII. Peripheral interfacing: a. Parallel ports for external printer , key- board and PC. Software PC Compatible. XXV .Power Cord : Indian Type 3-pin power cord locally available and replaceable . XXVI: Dust Cover : Washable dust-covers for main unit and key-board, etc. XXVII: Working Manual : Working Manual by
manufacturer in original
2 HbA1c analyzer Specification for HbA1c analyzer Analytes HbA1c Principle HPLC Technology Sample Volume Less than or equal to 3ml. Sample loading Should load (50-60) samples simultaneously capacity with continuous loading facility.
01 pc 2000.00
SOFTWARE
ADDITIONAL
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 242 -
Throughput < 8 minutes per sample Assay time Minimum Assay Time Assay Should be able to detect correct HbA1c values in the presence of commonly occurring abnormal haemoglobin variants. Primary tube sampling Facility should be there Calibrators External /Internal Control Control should provide External /Internal normal and abnormal control. Check facility Should be able to check all system parameters (cartridge, reagent, waste etc) CV < 3% Approvals Any two approval from the following CE / FDA /IFCC/NGSP approvals
3 Test Tube rack _________________________ 20 pcs 50
4 Water Bath Rectangular
Water Bath Rectangular: Thermostatic control /; Boiling Water baths, with lids having 8-12 Holes with shaker Specification: Temperature range from ambient to 950C. Thermostatic control with an accuracy of +/- 10C. Double walled with inner wall of stainless steel and outer of MS powder coated, with lids of SS. The unit is provided with immersion type heaters to work on 220 V.A.C. The unit is supplied with indicating lamps. Main chord and Plug. Size of the inner chamber- 355x100mm; 1.5kw with shaker.
01 pc 1000
5 Colorimeter Specification:Photoelectric colorimeter with filter Digital Colorimeter - Highly Stable & accurate Ideal Clinical instruments for Blood & Chemical Analysis. Models Available ME 953 C 5 Filter ME 954 C 8 Filter ME 944 C 8 Filter With Battery Option. Range : 400 nm to 700 nm Filters 5 High Standard Filters, Accuracy ±
4 Nos 400
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 243 -
0.02 O.D., Reproducibility ± 0.01 O.D., Out Put Optical Density 0 to 1.99, Display 2 ½ Digit LED Display, Detector Selenium Photo Cell, Light Source 6.2 V 0.3 Amp. Tungston Filament Lamp, Min. Volume 1 µl., Power 230 V ± 10% 50 Hz AC, Size (LXBXH) 225 x 230 x 150 mm, Weight 4 kg. (Approx), Accessories Test Tubes 5 Nos, Light Source Bulb, Dust Cover, Instruction Manual.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 244 -
SL. NO.
NAME OF EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
REQUIREMENTS /QTY(FOR ESI-PGIMSR, JOKA)
EMD VALUE
QUOTED (YES/NO)
DEPARTMENT OF PHARMACOLOGY 1 Cannula-made of corning glass (Arterial- hollow bulb with
three arms, Venous–hollow glass tube- 4-5cm length & 3-4 mm diameter Syms cannula)
10 each 500.00
2 Four Unit isolated organ bath palmer F.67 For Internal Organs with stirring arrangements, made of transparent acrylic sheet, chemically welded to make leak proof. Complete with uprights, organ & oxygen tubes, capillary tubing, and frontal lever etc.Temperature by immersion heater and control by thermostat.
1 500.00
3 Dissection instruments and injection syringes as required Sets containing surgical standard scissors-2, curved scissors-2, pointed scissors-2, artery forceps-2, Mosquito artery forceps-2, scalpel handle-2, plain forceps-2, toothed forceps-2, small retractors-2, etc. Probes-2, hooks-2. To be supplied with proper cover and box.
1 500.00
4 X-blocks as required(Open and Closed) Machined from solid Brass rod, richly chromium plated to hold 9mm, 6mm and 12.5 mm rods
10 each 500.00
5 Hook grip rods as required- Should be suitable to fit in an X-block
25 500.00
6 Plain stand 25 500.00
7 Hair Aesthesiometer-Palmer W.290 1 500.00
8 Copper Trays (10”x8”x1”) 25 500.00
9 Microscopes ordinary - With fixed bright filed two lens condenser and iris diaphragm, heavy metal stand with triple nose piece. Coarse adjustment by rack and pinion and fine adjustment by precision grade slow motion arrangement in a beautiful storing cabinet -
2 500.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 245 -
Total magnification 675 x Eye pieces H10x, H15x Objectives 10x, 45x (spring loaded)
10 Chemical Balance – Sensitive Balance beam scale, capacity: 120g/0.01g 220g/0.01g 320g/0.01g 1200g/0.01g 2200g/0.01g 3200g/0.01g. Power AC/DC with lithium battery. Display: LCD/LED with back light. Fan size: diameter 130mm.
1 500.00
11 Skin and Rectal Thermometer Barun - 1 500.00
12 Starling's or Heart Lever:-This lever is used to record the contraction of heart. The differences between this & other isotonic levers is that fulcrum lies at one end beyond the point of attachment. It consist of a frame carrying a light lever arm with holes and notches supported by a fine adjustable nickel silver spring attached to an adjustable hook.
2 500.00
13 Microscope with mechanical Stage and oil immersion 2 500.00
14 Frontal writing lever - This lever is designed in such a way that the writing point rotates freely about its axle. This helps in reducing the tension between the smoked paper and the recording tip. The contraction are recorded as straight line
2 500.00
15 Fixit lever - the levers can be fixed to the spindle in the center p f which a vulcanite spindle on one of these pins lever fits, sliding through the frame is a rod carrying a spring that can be caused to bear against the roller its turning while other adjustment are made.
2 500.00
16 Colorimeters 1 500.00
17 Condon’s Drop Recorder-Palmer B-75 1 500.00
18 Jacquets graphic chronometer 1 500.00
19 Museum drugs specimen boxes rectangular, acrylic with cover. Sizes:- 9”x5”x4”(inch)& 6”x4”x3”(inch)
50 each 500.00
20 Microscope lamps - standard quality 2 500.00
21 Multimeter 1 500.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 246 -
22 Operating Table- JKA-172 : Suitable for Rabbits, Rats, Guinea Pigs and such like small animals. Top is of Stainless Steel and provided with adjustable head holder, tie-cleats, cut-back at the head-end with warming chambers.
1 500.00
23 Instrument Trolley (30”X18”X30”) 1 500.00
24 Instrument Trolley( 48”X24”X30”) 1 500.00
25 Manometer mercury glass U-tube (5 mm bore , two vertical limbs 30 mm height half filled with mercury (upto 250 mm of Hg)
2 500.00
26 Tracheal cannula metal ( z-shaped & y- shaped)
2 each 500.00
27 Bull dog clip 10 500.00
28 Rat holder- single u and ring pattern 38 mm with Universal joint
2 500.00
29 Mercury manometer –Meriam, All Manometers are fabricated from true-bore Borosilicate glass, floats are perfectly, lapped to eliminate leakage and are fitted with feather weight stainless steel capillary. Standard Mercury Mercury Manometers: Without stopcock, with adjustable scale.
2 500.00
30 Autoclave electric-small 1 500.00
31 Sterilizer electric size 12”x8”x6” 1 500.00
32 Stimulator electronic Arthus Thomas- Selectable pulse per second in different steps and pulse with, continuous variable volt in multiple of 1 and 10 with internal, external and single pulse mode
1 500.00
33 Flame Photometer 1 500.00
34 Manometers
Mercury All Manometers are fabricated from true-bore
Borosilicate glass, floats are perfectly, lapped
to eliminate leakage and are fitted with
feather weight stainless steel capillary.
1 50
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 247 -
Standard Mercury Manometers: Without
stopcock, with adjustable scale.
35 Marey’s
Tambours Traditional (5cm to 10cm diameter) 2 50
36 Physiographs
with
transducers,
couples and
other relevant
accessories
(Earthing chord, chart paper, ink pen, ink
etc.) Recording system, amplifier, different
couplers like bio potential, EKG, strainage,
pulse respiration, temperature and isotonic
couplers, speed selection is easy and
instantaneous. Channel width is 70 mm, Ink
writing pen is 120 mm in length to minimize
arc distortion. Main Amplifier is fitted in the
console having switch selectable sensitivity
range from 50 microvolt per cm to 100 milli
volts per cm in eleven steps as
50,100,200,500 mv/cm and
1,2,5,10,20,50,100 mv/cm.
1 2000
37 Kymograph
(students)
Electrical
independent
unit
Electrically driven recording drums suitable
for use by students for general experiments. Drive mechanism consists of Constant speed
electric motor and accurate Gear-box contained in the base together with robust plate clutch. Engagement of various gear
ratios are effected by sliding the lever into the slot marked with surface speed or by a knob
in separate models. Main cylinder and Stainless Steel spindle have been standardized to make the same universal and
interchangeable. Double electric contact arms are clamped on the main spindle and a stout double-contact block is fitted on top of
23 4000
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 248 -
the base. Gear ratios i.e. 640 mm, 320 mm,
25mm, 12.5mm, 2.5mm, 1.2mm, 0.25mm, and 0.12mm per sec, are effected by sliding lever into the slot marked with 8-surface
speeds. Highly accurate speeds
Auto concentration curve (crc) mode and
normal mode.
Sturdy body
Corrosion resistant
Low power consumption
Audio and visual alarm
Easy height adjustment
Writing lever
Starling Heart Lever
Isometric Lever
Vibrating read, variable interrupter Time marking – tuning fork (100 hz), spring
time marker, electromagnetic time marker
38 Tracheal Canula
Metal Made of Brass with adjustable Air-vent.
Should be able to use for endo-tracheal
intubation of big animals like Dog & Cats
4 50
39 Weighing-
Machine for
small animals
like rats and
guinea pig
Animal weighing scale; Livestock scale: slip
proof-pan, waterproof-design, with railing and
door. High legs for rough ground
2 50
40 Weighing-
Machine for big
animals like
Animal weighing scale; Livestock scale: slip
proof-pan, waterproof-design, with railing and
door. High legs for rough ground
1 50
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 249 -
cats and dogs
41 Apparatus for
isolated rabbit
intestine
A Cylindrical copper bath with heating
element controlled by thermostat. Complete
unit with uprights, glass inner vessel and
oxygen tube with platinum tip frontal lever
from SS capillary tubing, fitted on teak base
board
25 4000
42 Animal trolley
with 12 cages
Fabricated from 1 square hollow pipe and
angel of S.S. 304 quality material. The racks
are mounted on four heavy duty 4, dia castors
for easy handling and quiet transportation.
Complete with argon arc joints and mirror
finish. Available to hold 24 animal cages of
size: 29X22X14 cms. (LXBXH). Rack size:
39X12X60 (LXBXH).
1 50
43 Dissection
Instruments Sets containing surgical standard scissors-2,
curved scissors-2, pointed scissors-2, artery
forceps-2, Mosquito artery forceps-2, scalpel
handle-2, plain forceps-2, toothed forceps-2,
small retractors-2 etc. Probes-2, hooks-2,.
To be supplied with proper cover and box.
1 50
44 Frog Boards ____________________ 25 50
45 Stop watches
Digital – Digital Stop Watch, Digital Stop
Watch is perfect for any laboratory
applications. The large LED display, high
resolution enhances the functionality in
several of situations. These are available in
two ranges as per specification. Range
6 50
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 250 -
1:99:59:59 Hrs:Min:Sec. Resolution: 1 sec
(for range 1) Min:Sec:Milisec. Range
2:99:59:99 Hrs: Min: Sec Resolution:
10milisec (for range 2) Display: 6 digit LED
Display Alarm: Buzzer after set time.
46 Chemical
balance-
ordinary
apothecary’s
Best quality with divided doors show case,
capacity 250 gms. Sensivity 1-2 mgm having
all stone agates fitted in open graduated beam
1 100
47 Pill tiles ______________ 30 100
48 Porcelin dishes ______________ 30 100
49 Pestle and
Morter
______________ 30 100
50 Iron spatula ______________ 30 100
51 Horn spatula ______________ 30 100
52 Galli
pot/ointment
pot
______________ 30 100
53 Glass rods ______________ 100 100
54 Plethysmograph
assorted High Resolution Volume.
Resolution: 0.01 ml, Accuracy+/-0.01ml. Easy to use pedal switch. LCD Graphic
Display
1 100
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 251 -
55 Antihistamine
chamber with
manometer
Should be a complete Histamine aerosol
apparatus having a acrylic box with nebulizer
sphygmomanometer and chloroform bellows
for assay of antihistamine drugs on guinea-
pig etc.
1 100
56 Actophotomete
r (activity cage)
The frame is equipped with 32 infrared
photocells, 16 placed in axis X and 16 placed
in axis Y. The Photocell work at a wavelength
of 950 nm and its information is multiplexed
at a rate of 40Hz. Hole board plate is
provided with 16 holes of diameter and
detection depth. It should contain
incorporated electric facility (variable) 0 to
100 volts for activating rats and indicating on
meter.cm
1 500
57 Rotarod
Assembly Should have 5 chambers, 75 mm width each with a rotating rod of 25mm diameter having
speeds of 5.10 to 15.20 and 25 r.p.m.
Digital rpm indicator and digital time
counters.
Each counter runs from the beginning of
the test until the animal falls from the drum to the lane.
Electronic change of speed from 4-120 rpm.
1 500
58 Electro
convulsiometer
Should be able to use for producing minimal
and supra minimal seizures required for
assaying of anti-epileptic and anticonvulsant
drugs. Should provide minimum 50Hz
stimulus current which can be adjusted
0.15mA to 330mA in steps, with one pain
1 1000
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 252 -
corneal electrode 4,6 or 8mm cups. And one
pair of ear clips work on 220 AC. Should
contain electronic timer device from 0.1 to 3
seconds in steps to control the stimulus
current and LED indicator for duration of
stimulus.
59 Analgesiometer
Thick pure aluminum plate (12mm) provides a very high temperature
stability and even surface distribution.
Plate temperature can be held at a set
point between above ambient to 70 degree C (+/-0.2 degree C).
A built-in timer activated by an external
foot switch allows the precise measurement of the reaction time (0.1
sec resolution).
Remote foot-switch controls the test
start/stop allowing rapid Hands-free experiments.
Provided with the calibration certificate of the
temperature indicator.
1 500
60 Cooke’s pole
climbing
apparatus
Should be having 2 (two) chambers, an outer
chamber made of thick plywood sheet with an
observation window and inner animal
chamber made of clear acrylic sheet with a
brass bar at the bottom. A built in shock of
200V AC, 50 Hz single phase with min of
0.2mA and is to be controlled by min of 11
position solid state timer up to 30 seconds.
Should be having output terminal for
kymograph recorder. Animal dropping tray to
1 1000
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 253 -
be provided to keep the equipment clean.
61 Metabolic cage
(diuretic study)
Classic metabolic cages with electronics to
monitor the receptacles for food and water.
Each may be removed without disturbing the
animal. Optional infrared beam arrays
(similar to those of the Activity Cages) can be
mounted on either side of the cage to monitor
coordinate activity and rearing behavious.
Each cage is comprised of interchangeable
parts which can be cleaned in a standard
vivarium wash station.
6 1000
62 Tablet
Disintegration
machine glass
tubing (length
of 6ft)
Hooper diameter of minimum 2”. Should be
fitted with min 4 steel hammers fixed to a disc
and Shaft being revolved at the speed of 3000
RPM. Rotation in vertical manner is made by
EHP Motor which carries a specially designed
Basket to hold 6 nos. of Tablets/Capsules
under specified weight, moving vertically in
temperature controlled glass vessels/Beakers
placed on Hot Plate. Having special type of
starter facility operatable on 220 volts AC
supply.
1 500
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 254 -
SL. NO.
NAME OF EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
REQUIREMENTS /QTY(FOR ESI-PGIMSR, JOKA)
EMD VALUE
QUOTED
(YES/NO)
DEPARTMENT OF ANESTHESIOLOGY (MANICKTALA)
1 Monitor for
Continuous Measurement of Cardiac Function
A. Monitor for Continuous Measurement of Cardiac Function:
1. It should be arterial line based continuous
monitoring device for Cardiac output, Cardiac
Index, Systemic Vascular Resistance and Stroke
Volume.
2. It must be supplied with good quality display
device and ten Flotrac and necessary catheter
system.
3. The device should be compatible with Flotrac
sensor system
4. Necessary accessories should be supplied for
systemic vascular resistance measurement
5. It must be CE and/or FDA certified
01 pc 14000.00
2 Monitor for continuous measurement of body tissue oxygenation and oxygen delivery status
B. Monitor for continuous measurement of body tissue oxygenation and oxygen delivery status:
1. It should be auto-calibration based arterial-
venous line based measuring device to provide
continuous measurement of ScVO2, SvO2 , Extra
01 pc 8000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 255 -
vascular Lung water index and Ejection fraction
as well as End Diastolic volume of heart
2. The monitor should be supplied with 10 (ten)
relevant and related sensors for measurement of
hemodynamic variables
3. Suitable display and storage device for data
should be supplied
4. It should be CE and/or FDA certified
3 Instant Hand held blood pH and Lactate monitor
D. Instant Hand held blood pH and Lactate monitor: 1. Portable, cartridge based hand held device
capable of measuring blood pH, Lactate and
other variables such as Troponin, Ionised
Calcium, Prothrombine Time, Creatinine Kinase-
MB and Brain Natriuretic Peptide
2. Measurements should be quantitative in nature
3. It should be supplied with wireless based printer
and electronic simulator for calibration
4. It must be FDA and/or CE certified
01 pc 6000.00
4 Lumber Puncture Simulator with Epidural block trainer
E. Lumber Puncture Simulator with Epidural block trainer:
1. The device should be a 3D image guided one
suitable for training of epidural needle insertion
2. It should be based on real time motion picture
based capturing system with display of procedure
on screen
3. The system should be capable of evaluation of
01 pc 16000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 256 -
trainee’s performance
4. All relevant interfaces and accessories should be
supplied with the simulator
5. It must be FDA and/or CE certified
5 Spinal Injection
Trainer F. Spinal Injection Trainer:
1. Mounted trainer should be able to be used
multiple times
2. It should be supplied with three sets of
accessories like fluid bags and simulators
3. One vertebrae must be visible for proper
identification of performance site
4. Trainee should be able to be guided by
perceptible tissue resistance while going through
different levels of tissues
5. It should be CE and/or FDA certified
01 pc 2000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 257 -
6 Central Venous Catheter Simulator
G. Central Venous Catheter Simulator: 1. Simulator should have life like anatomical
structures for identification of parts related to
central venous catheter insertion
2. It should allow trochar and guide wire insertion
for complete training
3. Device should be supplied with five replaceable
skin pads for each site of training
4. It should be supplied with all accessories like
artificial blood (two units), fluids, spare vessels
(two numbers), battery and other relevant items
5. Facility to check correct position of catheter
placement should be there
6. It should be CE and/or FDA certified
01 pc 8000.00
7 Cricotracheotomy trainer
H. Cricotracheotomy trainer: 1. It should be able to train routine as well as
percutaneous tracheotomy procedure
2. It should have easily palpable anatomical land
marks for identification of structures
3. Trainer must be steady in nature and should be
supplied with five sets of spare skin for
cricotracheotomy
4. It should be CE and/or FDA certified
01pc 2000.00
8 Peripheral Nerve Stimulator/ Locator
I. Peripheral Nerve Stimulator/ Locator: 1. The device should be able to locate nerves
03 pcs 5000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 258 -
percutaneously through electrical stimulation
based technique
2. It should be able to be used with monopolar as
well as bipolar based stimulation technology
3. Current intensity preferably be between 0 to 60
mA and stimulating impulse upto 1ms
4. Should be able to measure and display actual
current passing through tissues
5. It must be supplied with insulated cannula , ten
in number each for size 22, 24 & 25 G as well as
re-chargble battery and charger.
6. Needle quality should be able to give best image
under ultrasound guided procedures
7. It should be FDA and/or CE certified
9 Multi-frequency
based deep heat generator
J. Multi-frequency based deep heat generator: 1. Equipment should be multi-frequency based
dual outlet heat generator using long waves with a emission frequency range between 450 to 500 KHz
2. It must have coupling system of capacitive and resistive therapy system for heat generation at different depth of application area
3. Electrode pairs and handle tips with various diameters such as 30,50 and 70 mm must be supplied with the equipment
4. Power must be 100 W/KOhm or more
01 pc 16000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 259 -
5. It should be CE and / or FDA certified
10 Airway management Trainer:
K. Airway management Trainer: 1. Trainer must have good quality land marks of
upper airway and pulmonary structures for proper identification during intubation training.
2. It should allow various techniques of intubations and different methods of airway related activities like application of suction, Sellick’s maneuver, observation of pupil and carotid pulse palpation
3. It should be supplied with two sets of artificial lungs
4. It should be FDA and/or CE certified
01 pc 2000.00
11 Handheld instant hemoglobinometer with facility to measure Methaemoglobin
L. Handheld instant hemoglobinometer with facility to measure Methaemoglobin:
1. It should be able to be applied to patients of all
age groups and necessary probes/accessories to
be supplied in two in numbers for each age group
2. It should work even in low perfusion status and
should be least interfered by electrical
disturbances
3. It should be able to provide pulse variability
index, blood hemoglobin and methemoglobin
level non-invasively on continuous as well as
point of care basis
4. Perfusion index should be between o.o2 to 20%
5. Waveforms and/or digital display mode of
01 pc 4000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 260 -
presentation
6. It should be FDA and/or CE certified
12 NUCLEOPLASTY
SYSTEM 1. It should work on principle of Co-ablation
2. It should work through generation of
bipolar Radiofrequency without requiring
grounding
3. Terminal end temperature generation
must not be above 70 degree C
4. It should be capable of being used in both
Lumber and Cervical region
5. Supplied probe must have depth
penetration marks and stop lock for safety
and control.
6. It must be supplied with 17G (6 inch) and
19G (3inch) accessory needles, 5
needles of each size. Respective size
Probe also to be supplied.
01 pc 30,000
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 261 -
SL. NO.
NAME OF EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
REQUIREMENTS /QTY(FOR ESI-PGIMSR, JOKA)
EMD VALUE
QUOTED
(YES/NO)
Department of Forensic Medicine(For ESI-PGIMSR, JOKA)
1 Clinical thermometer Traditional type 2 50
2 Stykar autopsy saw
with accessories Light weight equipment, 10 feet cord with hospital grade plug -should cut bone easily to minimise operator fatigue - Saw should be attached to HEPA bone dust collector.
2 100
SL. NO.
NAME OF EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
REQUIREMENTS /QTY(FOR ESI-PGIMSR, JOKA)
EMD VALUE
QUOTED
(YES/NO)
Department of Community Medicine (For ESI-PGIMSR, JOKA)
1 Horrock’s
Apparatus
(Complete set
with chemicals &
Manual)
_____________________ 01 pc 50
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 262 -
Dept. of Human Physiology
DEPARTMENT OF HUMAN PHYSIOLOGY
SL. NO.
NAME OF EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
REQUIREMENTS /QTY(FOR ESI-PGIMSR, JOKA)
EMD VALUE
QUOTED (YES/NO)
1 Audiometry Audiometry & Tympanometry in one instrument; potable - demo piece; special Audiometry window; MPANL (maximum permissible ambient noise level) specified internationally by standard institutes like OSHA and ANSI for proper acoustic treatment
1 6000.00
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 263 -
PLEASE QUOTE YOUR RATE. ANNEXURE –V
SHEET - I
SL. NO. NAME OF EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
REQUIREMENTS /QTY(FOR ESI-PGIMSR, JOKA)
Unit Cost (to be filled in by tenderers)
Total Amount (in figure)
Buy back rate(in figures)
Final amount after reducing buy back rate
DEPARTMENT OF ANESTHESIOLOGY ESIC-PGIMSR & MC & ESICH & ODC (EZ) JOKA 1 Anesthesia
Workstation (with multiparameter patient monitor)
1.Three gas (O2, N2O, Air) Anesthesia Gas Delivery Unit with the the following sub specifications:
a. The unit should have primary connection for central medical gas supply for O2, N2O and Air.
b. Provision for back up emergency supply through pin indexed O2 and N2O small cylinders.
c. Electronically controlled gas mixing and delivery system.
d. In case of O2 failure, the machine should automatically switch over to Air.
e. Audio visual alarm for O2 failure.
f. Accurate control of minimum 25% O2 in fresh gas (through sensitive oxygen ratio controller) up to flow of > 1 L/min, in presence of N2O. At least 250 mL/min of O2 for low flow and minimal flow
03 pcs
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 264 -
applications (fresh gas flow < 1 L/min).
g. Should be capable of accurate fresh gas delivery of up to 500 mL/min for minimal flow applications.
h. Ergonomically located integrated emergency O2 flush with self returning valve.
i. Should have single user-interface of at least 30 cm color display and electronic fresh gas doing for adult, child and neonate modes. The same user-interface should control and display all parameters including control of ventilator modes, display of pipeline and cylinder pressures, FiO2, ETCO2, airway pressures, tidal volume, minute ventilation, fresh gas flow, etc.
j. The user-interface should have configurable screen layouts for individual screen setups.
k. The machine should have fully automatic menu driven self test and user check list. In case of emergency machine startup, it should be possible to bypass the self test completely.
l. The system leak test should be done through the Y-piece of the circle system and should not require user interaction
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 265 -
during the test.
m. O2 safety flow adjustable from 0 – 12 L/min, through the vaporizer for emergency back up use.
n. Machine should also have an independent fresh gas outlet for connection to external circuit (Bain's circuit and Magill's circuit).
o. The machine should have a configurable nitrous-oxide-free operation (in case of necessity).
p. Fresh gas flow setting 50 mL/min to 12 L/min.
q. It should have the indicator to show the efficiency of fresh gas setting while used in low flow and minimal flow.
r. In the event of complete loss of external electric power and internal battery failure, it should be possible to manually ventilate the patient at 100% O2 and deliver anesthetic agent.
s. Major and critical components to be made of corrosion proof and durable metal alloy.
2.Integrated Anaesthesia Ventilator:
a. Electronically controlled, electrically
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 266 -
driven ventilator should not require any driving gas or pneumatic power for its operation.
b. Ventilator should be suitable to ventilate adult, child and neonate without changing ventilator bellows.
c. Ventilator should have fully automatic calculations and preset of patient specific ventilation settings based on ideal body weight of the patient.
d. Automatic breathing circuit compliance correction. Bellow should be enough light weight as not to offer any constant PEEP.
e. Modes of ventilation: Spontaneous ventilation, Manual ventilation, IPPV with plateau adjustment from 0 – 60 % of inspiratory time, PLV (pressure limited ventilation) with decelerating flow, Pressure controlled ventilation, SIMV-VCV, SIMV-PCV, Pressure Support (PS), PS with CPAP, PS with SIMV (CMV/PCV).
f. Should be upgradeable to Volume assured mode - autoflow – delivering set tidal volume at minimum airway pressure.
g. Peak inspiratory flow up to 150 LPM.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 267 -
h. Tidal volume adjustments from 20 mL to 1400 mL (upgradeable to minimum 5 mL).
i. PEEP from 0 – 20 mbar, electronically adjustable.
j. Respiratory frequency 3 – 100 /min.
k. I:E ratio: 5:1 to I:99
l. Should have the capability to ventilate with atmospheric O2, in case of O2 and power failure.
3.Circle breathing system, Circle absorber:
a. Compact circle breathing system suitable for standard, low flow and minimal flow with minimum patient circuit volume including circle absorber (approx. 3 L, excluding reservoir bag) for fast response to change in fresh gas compensation.
b. Fresh gas decoupled / compensated breathing system for adult and children.
c. Integrated warmer in circle absorber for breathing gas conditioning and prevention of water condensation inside the circle system.
d. Breathing gas inlet and outlet of the
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 268 -
circle system should be fitted with reusable (autoclavable) bacterial-viral filter.
e. Should have facility of gas sampling from the breathing system.
f. Manual APL on circle system valve with direct setting of release pressure.
g. Easy to fit and change circle absorber canister of about 1.5 L capacity.
4. Vaporizers: a. Temperature and pressure
compensated and flow interdependent vaporizer for Sevoflurane (1 such) and Isoflurane (1 such).
b. Vaporizer should have extended delivery range from 0 – 6%.
c. Vaporizers must have selective interlocking safety mechanism to prevent simultaneous operation of two vaporizers.
d. Should have transport lock and provide hermetic sealing of agent chamber during transport and storage.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 269 -
e. The vaporizer should require no calibration in its life cycle.
5. Safety features and alarms: a. The machine should have adjustable
alarm limits for all the parameters with auto set alarm function.
b. The machine should have automatic display of MAC/MACx values and automatic activation of low agent alarm
c. Airway pressure low limit should automatically change with PEEP setting changes.
d. Continuous monitoring and display of tidal volume, airway pressure, ETCO2, FiO2 (paramagnetic O2 sensor), anesthetic agent concentration (with automatic identification of anesthetic agent), lung compliance (VCV modes).
e. Graphic display of curves and loops with fast analysis of change in lung mechanics provided by simultaneous display of reference and real time loops.
f. Bar graph display of tidal volume (inspiratory and expiratory volume).
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 270 -
g. Trending for alarms and measured values with graphic trend display.
h. The machine should calculate agent compensation and agent uptake by patient on a case to case basis and display total fresh gas consumption in the electronic logbook of the machine.
6. Accessories to be provided: a. Should have at least 3 pc of RS232
connectivity port to communicate with patient monitor or HIS for automatic data transfer.
b. Pin indexed yokes for O2 and N2O (one each)
c. The machine should have externally-fitted water and moisture trapping chamber (large capacity) fitted to the medical air pipeline inlet.
d. Trolley with drawer.
e. Floor mounting with durable caster wheels with brake.
f. Writing surface.
g. Color coded and DISS coded pipeline connections and hoses for O2, N2O and Air.
h. Adult and Child breathing circuits
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 271 -
(autoclavable).
i. Anesthetic face masks (silicone, latex free).
j. Water traps and sampling lines for gas analyzer.
k. Semi closed breathing system for adult and child (latex free).
l. Cylinder key (2 such) chained to the machine, near the cylinder yokes.
m. User manual.
7.Quality standard of the equipment, warranty and after sales service:
a. All the components of the of workstation (anesthesia gas delivery unit, vaporizer, ventilator, circle absorber and circle system), should be manufactured by the same agency to maintain uniformity of parts and efficient after sales service.
b. Authorization for standing by, terms of warranty & AMC & supply of spares for 7 years.
c. Physical demonstration of the quoted model is mandatory.
d. Must have CE certification (EN 60601-2-13) w.r.t the essential requirement for safety and performance of the anesthesia
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 272 -
workstation.
e. The comprehensive warranty will be 5 years (including all spares and labor) from the date of satisfactory installation of equipment. Also quote rates for comprehensive CMC (including all spares and labor) for 6th to 10th year, after expiry of warranty period. Cost of spares, accessories and consumables should also be quoted separately.
f. Within the warranty period, substitute working equipment of same model and make must be temporarily provided by the supplier free of cost to cover for any downtime exceeding consecutive 48 hours.
g. Facility for good after sale & service with trained engineers posted in Kolkata.
Multi-parameter patient monitor (integrated with the anesthesia workstation) with the following technical specifications are required.
1.Parameters: a. Should be suitable for monitoring
adult, child and neonatal patients under anesthesia.
b. Should have minimum of ECG, SpO2, NIBP, 2 IBP, 2 Temperature as inbuilt standard parameters. All other parameters should be by
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 273 -
upgrades as pods or modules and software.
c. ECG: Five lead ECG monitoring with simultaneous display of three leads of ECG wave forms. Simultaneous display of twelve lead ECG waveform should be possible.
d. Respiration: Through impedance pneumography from ECG.
e. SpO2: Should have digital display, plethysmography, and tone modulation with change of
f. SpO2. Should be supplied with Masimo SET technology with compatible sensors for Adult, Child and Neonate.
g. NIBP: Oscillometric method of NIBP measurement with stepwise deflation. Adult, child, neonate preset modes. Compatible NIBP cuffs for Large adult, Adult, Child and Neonate. Should display systolic, diastolic, mean pressure in large, easy to read display. Measurement modes: automatic, manual and stat. Automatic mode adjustable intervals from 2 minute – 240 minutes and adjustable alarms.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 274 -
h. IBP: Simultaneous monitoring of 2 IBP. Range – 50 to 400 mmHg.
i. Temperature: Simultaneous monitoring of two temperature: core and skin temperature.
j. Simultaneous monitoring of two IBP and one temperature should be possible.
a)User Interface:
a. Should be suitable for adult, child and neonatal monitoring.
b. Should have non-volatile memory for graphic and tabular trending of all monitored parameters as standard.
c. Should have event recall for minimum of 50 events, graphical and tabular trends, drug dose calculations, alarm logs, OxyCRG, oxygenation-ventilation and hemodynamic calculations as standard.
d. Should have arrhythmia detection including life threatening arrhythmias such as ventricular tachycardia, ventricular fibrillation, asystole, as standard feature.
e. Should have manual and automatic
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 275 -
setting of screen format.
f. Should have user selectable parameter priority and color selection for parameter on screen.
g. Should have excellent cable management with as minimum as possible cables at monitor and patient end for maximum user friendliness.
h. Should have facility for both wired and wireless networking.
i. Should have minimum eight channels of waveforms with minimum 8 inch display.
j. Cursor tool for vertical and horizontal cursors.
k. Should have web browsing facility to review each networked monitor through hospital LAN via PC in hospital LAN from remote location should be possible as future upgrade.
b)Optional upgrades/ modules (to be
quoted separately):
a. Neuromuscular monitoring module for monitoring neuromuscular
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 276 -
blockade.
b. Bispectral index module for monitoring depth of anesthesia.
c)Safety features:
a. Internal battery backup for minimum of 3 hours (Li-ion battery) to be provided.
b. CE and US FDA certification for the monitor as well as the individual parameter modules w.r.t the essential requirement for safety and performance of the monitor and accessories.
c. Should have defibrillator and ESU protection, ECG Synchronization, IABP interface (ECG and Arterial for triggering and deflation with a device delay of < 20 milliseconds.
d)Accessories:
a. 5/12 lead ECG cable.
b. SpO2 Masimo set finger sensor with extension cable for adult, child and neonate.
c. Temperature probes (2 pc).
d. NIBP Hose.
e. NIBP cuffs (large adult, adult, child,
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 277 -
neonate).
f. IBP reusable cable for 2 IBP and 10 pc disposable transducers.
g. BIS module and DSC cable..
h. NMT module and cable with acceleromyograph..
i. User manual.
e)Warranty and after-sales service:
a. All the components of multi-parameter patient monitor should be manufactured by the same agency to maintain uniformity of parts and efficient after sales service.
b. Authorization for standing by, terms of warranty & AMC & supply of spares for 7 years.
c. Physical demonstration of the quoted model is mandatory.
d. The comprehensive warranty will be 5 years (including all spares and labor) from the date of satisfactory installation of equipment. Also quote rates for comprehensive CMC (including all spares and labor) for 6th to 10th year, after expiry of warranty period. Cost of spares, accessories and consumables
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 278 -
should also be quoted separately.
e. Within the warranty period, substitute working equipment of same model and make must be temporarily provided by the supplier free of cost to cover for any downtime exceeding consecutive 48 hours.
f. Facility for good after sale & service with trained engineers posted in Kolkata.
2 Multi functional Surgical OT table ( C-arm fluoroscope compatible ) with electronic control
Multi functional Surgical OT table ( C-arm fluoroscope compatible ) with electronic control with the following specifications :
Should be a mobile universal operating table with Direct motor driven adjustment of height, lateral tilt, Trendelenburg/anti-Trendelenburg.
It should be 100% oil free. Should have a longitudinal adjustment of
250 mm. Should have pneumatic spring support for
leg section and back section. Adjustment of the column functions should
be electrically Motorised via cable remote control
Should have additional operating panel with status indicators for tabletop orientation on column.
Should have built-in electronic interface to allow remote diagnosis and software updates via modem.
Should have maintenance-free battery, integrated in the column, which can be charged via a separate charging cable that also serves for direct mains operations if needed.
03 pcs
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 279 -
Basic tabletop should consists of seat section and back section that can be adapted and extended to meet the requirements of all the surgical disciplines by combining it with other tabletop components.
The system should have Electrical and functional safety with Microprocessor and Sensor Technology Module.
Completely X-ray translucent tabletop. Pads should be integrally foamed,
electrically conductive, soft and detachable, Velcro-free system for optimum hygiene and durability.
Should have stable running gear with 4 large double castors with a minimum diameter of 150 mm for easy manoeuvring.
Should have foot switch for brake. Should have H – shaped base providing a
plenty of space for the surgical team's feet. Tabletop frame, column cladding, side rails
and running gear frame should be made from disinfectant-resistant, easy to clean stainless steel.
It should be operated manually without the remote.
Column drive Height adjustment (without pads) Trendelenburg/Anti-Trenelenburg Tilt Pneumatic spring-assisted leg section up/down Standard leg section up/down° Back section up/down Longitudinal slide Patient weight
Electro-mechanical motor 700 mm – 1.120 mm 30°/35º +-25° +20°/-90° +-90° +85°/-30° 250 mm More than 225 Kg
The systems should be quoted with following
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 280 -
General accessories :
1. Arm positioning support with radiolucent upper arm pad and roll- 2 nos.
2. Shoulder support-1 pair. 3. Anaesthesia Screen-1 nos. 4. Suspended arm strap set-2 nos 5. Infusion pole with 4 hooks-1 nos. 6. Body strap with locking Clamps-2 nos. 7. Lateral support height adjustable-2 nos. 8. Clamps-4 no. 9. Semi-circular pad-1 nos.
The systems should be quoted with following Orthopaedic accessories :
1. Knee Arthroscopy adapter 2. Radial clamp 3. Leg holder 4. Side rail extension & adapter
5. The table should be USFDA, & CE and UL certified
6. It should be meeting international standards for medical and electrical safety standards;
3 Cardiac Biomarker
Analyzer (Card-based
Quantitative Assay):
Technical Specifications of Cardiac Biomarker Analyzer (Card-based Quantitative Assay):
a. The card-based portable Cardiac
Biomarker Analyzer should be able to
quantitatively measure the following
parameters: Troponin I, BNP, CK-MB,
Myoglobin, D-Dimer, using
Fluorescence Immunoassay
02 pcs
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 281 -
Technology.
b. The analyzer must be small in dimension
and portable system.
c. The analyzer must be easy to operate,
intuitive user interface, requiring
minimum technical training of the
operator.
d. The unit should operate on AC adapter
and also on inbuilt Li-ion battery backup.
e. The sample requirement must be less
than 300 micro liters for a given panel of
test.
f. The single-use test card should be self
contained with all the reagents, sensors
& calibrating solutions required for the
test.
g. The system should have inbuilt memory
capacity of at least 500 test results with
date and time.
h. Operating temperature range between 18
and 30 degree Celsius.
i. The system should be provided with an in-
built thermal printer.
j. The system should be able to interface with
HIS and LIS software.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 282 -
k. Should have built in QC check facility
for the instrument.
l. Should be able to perform all the
quantitative tests of a single sample in
less than 20 minutes.
m. Should be US FDA certified and CE
marked for all the main equipment as
well as the accessories and kits used.
4 The Endoscope Drying Cabinet
The Endoscope Drying Cabinet should have the following technical specifications:
1. Approximate dimensions: Width X Depth x Height = 1280 mm x 470 mm x 2150 mm.
2. Approximate depth of chamber = 370 mm; approximate volume of chamber 0.6 cubic meters.
3. Number of endoscope positions: at least 6 (six).
4. Drying time = 120 minutes or less. 5. Storage time = 160 hours or more. 6. Power supply: 230V x 0.9 A, 50 Hz,
AC. 7. Power consumption should be less
than 150 watts. 8. Air supply: compressed air
pressurized medical grade dry air, internal pressure 3 – 8 bar, dew point = - 43 degree C.
9. Internal ventilator 30 cubic meter/h (approximately).
10. Hepa filter (filter class minimum 7) with 0.3micrometer/9997 DOP; HEPA filter resistance = 200 Pa
11. Cabinet doors must be lockable, with user access control to prevent
02 pcs
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 283 -
unauthorized access.
5 ELECTRO SURGICAL UNIT
TECHNICAL SPECIFICATION FOR ELECTRO SURGICAL UNIT
The Micro-processor based isolated Electro Surgical Unit should be compatible with Argon Coagulator system, designed for all kind of General Surgeries with both monopolarand bipolar modes. The following features are required 1. The unit should be entirely microprocessor
based. 2. Machine should have LED displays. 3. “Highest power efficiency rating” - have to
be within the range more than 97 %. 4. Real time tissue impedance monitoring
technology to deliver the selected power perfectly into a wide range of tissue types reducing thermal spread, RF interference and Neuro muscular stimulation and spark using feedback technology of sensing tissue types at a rate as high as 200 times in a second.
5. Return Electrode Contact Quality Monitoring (REM) system with Adaptive REM facility.
6. The Machine should work with disposable dual plate patient's return electrode with good quality of polyhesive adhesive get.
7. Patients' return electrode should be available in three sizes, for adults, paediatric and neonatals.
03 pcs
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 284 -
8. The patient return electrode should be all disposable type.
9. The service provider of the unit should have their working office/workshop in Kolkata.
10. Facilitating two surgeons at a time using one machine in the same surgery.
11. Numerical Error alarming system should be inbuilt.
12. With a single button on the machine, previous power setting can be recalled.
13. Should be type CF Equipment (IEC 601 – 1 & IEC 601-2-2) defibrillator proof.
14. Unit should be US FDA and CE certified 15. Facilitating under water procedures 16. Unit should have “Spray” mode with
Highest Crest Factor (in the range of 7-9) - (*Crest Factor as an indicator of a waveform's ability to coagulate bleeders without cutting effect.)
17. There should be option of changing the crest factor from low to high value with a single button.
18. There should be sufficient Coag modes present for all applications ( Preferably 4 coag modes)
19. Must be compatible with smoke Evacuator system, Argon Plasma Coagulator system and CUSA
Input power source; Operating Range : 170-260 VAC Line Frequency : 50-60 Hz Minimum High Frequency Leakage Bipolar
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 285 -
Less than 60 mA Monopolar Less than 150 mA OUTPUT CHARACTERISTICS Highest Powers should be in the below ranges
Precise – 70 Watts Standard – 70 Watts Macro – 70 Watts
Low – 300 Watts Pure – 300 Watts Blend – 200 Watts
Deisccate – 120 Flug. High Crest Factor – 120 Flug, Low Crest Factor-120 Spray - 120
OUTPUT WAVEFORMS :-
BIPOLAR: 470 Khz sinusoid
Monopolar Cutting Pure: 393 kHz sinusoid Blend: 393 kHz bursts of sinusoid recurring of 27 Khz intervals. 50% duty cycle envelope
Monopolar Coagulation: Dessication:- Low 1: 240 +-40 Khz sinusoid recurring at 39 Khz. 8% duty cycle Low 2: 393 kHz sinusoid Low 3: 393 kHz sinusoid Fulguration:- High 1: 470+-40KHz damped sinusoidal burstswith a
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 286 -
repetition frequency of 57 Khz High 2: 470+-40KHz damped sinusoidal burstswith a repetition frequency of 30 Khz Spray:- 390 Khz damped sinusoidal bursts with a randomised repetition centered at 28 kHz. Frequency include 21 Khz ‹ f ‹ 35 KHz Output Is further modulated by a random 250 Hz envelope with a variable duty cycle Output power changes by ‹ 15% or 5 Watts, which ever is greater, as the line voltage varies from 90 – 135 volts and 186 – 264 volts (into a 300 ohm load)
6 Forced air warmer
Specifications for Forced air warmer 1.Forced air warmer for patient warming with adjustable automatic temperature control between 32 - 44 degree Celsius, in steps of 4 degree Celsius; with outlet hose temperature monitoring system. The warmer unit should have the system of securely mounting on any IV pole or bed rail. Non-tipping mounting pole, with caster wheels, and wire basket to be provided with each warmer unit.
03 pcs
7 Forced-air
(convective)
patient-warming system
Forced-air (convective) patient-warming
system Technical Specifications:
a) Servo-controlled forced–air (convective)
patient warming system, using
thermistors placed at hose end.
b) Hose end temperature range must be
adjustable from 36°C to 44°C by 4°C
increments (±1°C). c) Relative Average Noise Level at 1000 Hz
(front and back) must be less than 45
dBA.
d) Air Flow: 55 to 86 cubic feet/min.
e) Must have air filtration system with 0.2 micron filters.
5 (five)
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 287 -
f) Operating voltage 230V, 50Hz AC.
g) The components and accessories of the
convective patient warmer must conform
to the following Quality Standards: Product Safety (EN 60601-1, UL 2601-
1); Convective Warming Blanket
Flammability (NFPA 702, 16 CFR 1610);
EMC (EN 60601-1-2, FCC 47 CFR Part
15, Class B); Enclosure Protection (IEC
60529 IP Code: IPX1); Convective Warmers (ASTM F2196-02); Drop Test
Compliance (EN 60601-1), and must
have the US-FDA 510(k) certification.
8 Portable USG
equipment for
vascular imaging and regional
anesthesia
Portable USG equipment for vascular
imaging and regional anesthesia Technical Specifications: a) Portable ultrasound machine with multi-
frequency broadband linear array, curved array
and sector array transducers used for accurate
localization of peripheral nerves, nerve
plexuses, and epidural space during regional
anesthesia and also localization of peripheral and central veins and arteries for vascular
access.
b) Must have US FDA 510(k) certification for the
main equipment and accessories.
c) Must have the following Internationally approved safety features & components:
Electromechanical safety standards: EN 60601-
1:1997; EN 60601-1-1:2001; EN 60601-2-
37:2001 + Amendment A1:2005; CAN/CSA
C22.2, No. 601.1-M90; CEI/IEC 61157:1992;
UL 60601-1 EMC Standards: EN 60601-1-2:2007;
CISPR11:2004
DICOM standard: NEMA PS 3.15:2000-Part 15
1 (one)
9 Ambulatory PCA
pump
Ambulatory PCA pump Technical Specifications: a) Ambulatory microprocessor controlled
programmable patient controlled analgesia
(PCA) pump.
b) Must have the following CE approved safety
features & components: IEC/EN 60601-1, Class
10 (ten)
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 288 -
IIIb (according to Directive 93/42 EEC; EMC:
IEC/EN 60601-1-2/ 60601-2-24.
c) Must have US FDA 510(k) certification for the
main equipment and accessories.
10 Syringe infusion pump
Syringe infusion pump Technical Specifications:
a) Syringe infusion pump for continuous
precise delivery of intravenous drug infusions.
b) Must have the following CE approved safety
features & components: IEC/EN 60601-1, Class
IIIb (according to Directive 93/42 EEC; EMC: IEC/EN 60601-1-2/ 60601-2-24.
12 (twelve)
11 Volumetric
(piston) infusion
pump
Volumetric (piston) infusion pump Technical Specifications:
a) Volumetric infusion pump (piston
mechanism) for continuous accurate fluid
infusions, with ultrasonic, adjustable air bubble sensor.
b) Must have inbuilt re-chargable Li-ion battery
of at least 1600 mA.
c) Must have the following CE approved safety
features & components: ISO 9001:2000 AND
ISO 13485:2003 (in accordance with the Medical Devices Directive 93/42/EEC; Design
Standard: EN 60601-1 (safety) and IEC 601-1-2
(EMC); Electrical Safety Stabdards: EN 60601-
1, IEC 60601-2-24, IEC 60601-1-4.
4 (Four)
12 Single chamber
temporary cardiac pacemaker (VVI,
VOO, AAI, and AOO
modes)
Single chamber temporary cardiac
pacemaker (VVI, VOO, AAI, and AOO modes) Technical Specifications:
a) Single chamber temporary cardiac
pacemaker with VVI, VOO, AAI, and
AOO modes.
b) VVI (AAI) modes must be selectable with
and without acoustic signal. c) Pacing Rate: 30 to 180 ppm
d) Atrial Overdrive Pacing (RAP): 2X (60 to
360 ppm); 4X (120 to 720 ppm)
e) Output Amplitude: 0.3 to 12 V ± 5%
f) Pulse Width: 0.75 ms ± 0.02 ms g) Sensitivity: 1 to 20 mV, Asynchronous.
h) Refractory period: 250 ms
i) Battery Type: Should accept Standard 9 V,
2 (two)
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 289 -
Alkaline or Lithium batteries. Should
have economically long battery lifetime
of up to 30 days of operation with a
single 9 V Alkaline battery. j) Weight must be less than 200g (with
battery)
k) Connector Compatibility: Must accept
standard connector pins with diameters
ranging from 0.9 to 2.0 mm. Must
accept all standard myocardial heart wires and temporary pacing leads for
direct connection or through temporary
extension cable.
l) Protective cover must be present to
safeguard against accidental changes to settings.
m) Audible warning tone for low battery,
including low battery indicator must be
present.
n) Pacing run-away protection feature
must be present. o) Arm Strap must be supplied.
p) The equipment must conform to ISO
and CE stands for safety of operation
and quality. 13 Pressure Infuser
Bag (Reusable): 1
L & 0.5 L sizes
Pressure Infuser Bag (Reusable): 1 L & 0.5 L sizes Technical Specifications:
a) Heavy duty pressure cuff specially
designed for rapid infusion/pressurized
infusion of fluids.
b) Suitable for pressure up to 400 mm of Hg.
c) Transparent material to enhance the
visibility of the fluid transfer/flow.
d) Easy to use, hook-and-loop fastener
enables easy replacement of Infusion bag without removal of Pressure Cuff
from drip stand.
e) Instant venting through the three way
stop cock enables quick deflation of the
cuff.
f) Clear & precise pressure gauge facilitates
20 pc of 0.5 L size
10 pc of 1
L size
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 290 -
rapid & reliable pressure control.
g) Squeeze bulb is supple, faster & easier
to operate for fast inflation.
h) Must conform to BIS / CE safety standards.
14 Percutaneous
dilatation
tracheostomy kit
(incorporating the
Seldinger
technique and reusable
“Guidewire
Dilating Forceps”)
Percutaneous dilatation tracheostomy kit
(incorporating the Seldinger technique and
reusable “Guidewire Dilating Forceps”) Technical Specifications:
a) Percutaneous dilatation tracheostomy kit
(incorporating the Seldinger technique and reusable “Guidewire Dilating Forceps”) with 7.0
mm ID cuffed tracheostomy tube.
b) Must have US-FDA and CE approved safety
features & components.
4 (Four)
15 Multimodal ICU
Ventilator
Multimodal ICU Ventilator Technical Specifications: a) Electric piston / turbine driven multimodal
ICU ventilator (Spont-PS, AC-VCV, AC-PCV,
SIMV-VCV, SIMV-PSV, Adaptive-BiPAP, PEEP,
invasive and non-invasive ventilation modes for
adult & pediatric patients.
b) Must conform to the following Standards & Safety Requirements: ISO 10651-2, ISO 10651-
3, ASTM F1100-90, IEC 60601-1, IEC 60601-1-
2, IEC 60601-2-12, UL 94 HB or better.
2 (Two)
16 Portable multi-
parameter patient
monitor
Portable multi-parameter patient monitor Technical Specifications:
a) Portable multi-parameter patient monitor with SpO2, ECG, NIBP, and Temperature, with
wireless LAN, and 3 h battery backup each
mounted on adjustable wall bracket.
b) Two (2) sets of standard accessories for ECG,
SpO2 (adult, pediatric, neonate), NIBP cuff &
hose (adult, pediatric, neonate), temperature probe,
c) Must have US-FDA and CE approved safety
features & components.
4 (Four)
17 Patient-transfer
slide-board
Patient-transfer slide-board Technical Specifications:
a) Patient-transfer slide-board for Operation Theater, (approx. dimensions: 1500 mm x 550
mm, L x W) made of lightweight & resilient
4 (Four)
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 291 -
radiolucent material of high impact tolerance,
good anti-static properties, maintenance-free
and easy to clean.
b) Must be CE approved.
18 Adult half body basic CPR (BLS)
training Manikin
Adult half body basic CPR (BLS) training Manikin Technical Specifications:
a) Half-body CPR (BLS) Training Manikin with
conforming to AHA (American Heart
Association) 2015 guideline for CPR and ECC.
b) Must be able to support the performance of opening the airway, artificial breathing and
external cardiac compression.
c) While performing artificial aspiration,
observable chest rise must be present.
d) External chest compression: feedback for correct compression dept (5-6 cm), correct
compression site with prompt correct buzzing
sound.
e) Excessive compression, prompt alarming
buzzing sound must be present.
f) Operation frequency: >100/min, with “tick” sound
g) Power: battery
2 (Two)
19 Adult advanced
CPR (ACLS)
training Manikin
with monitor & printer
Adult advanced CPR (ACLS) training Manikin
with monitor & printer: Technical Specifications:
a) Must combine the standards of the 2015 ACC-AHA & ECC guidelines, with up-
gradability to future revised guidelines.
b) Guide standards of implementation of
standards: the American Heart Association
(AHA), 2015 International cardiopulmonary
resuscitation (CPR) & Emergency Cardiovascular Care (ECC).
c) Anatomical features must be clear, feel real,
unified color, realistic shape, and aesthetic
appearance.
d) Must simulate vital signs: the initial state, analog mydriasis, the carotid artery pulsation.
e) After successful treatment, the simulated
human pupil must return to normal.
f) Must have feature of judging consciousness,
emergency call, pulse check, check breathing,
1 (one)
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 292 -
remove foreign bodies of five operations.
g) Artificial respiration and heart functions.
h) Airway open manuvers.
I) Modes of operations: CPR training, simulation, assessment and actual assessment.
j) CPR display functions:Electronically
monitored airway open and press parts.
Artificial respiration and external cardiac
compressions and the correct number and the
number of errors. 220V power supply.
k) Recording & Printer Features: Choice of
operating simultaneously print operation and
choice of operation after the resuscitation.
The printed transcript must cover covers the mode of operation, the sense of judgment,
rescue breathing, pulse check, check breathing,
remove foreign bodies, each cycle of operation
the number of compressions and blowing,
pressing the right / wrong number, press the
wrong reasons and frequency, inflatable the right / wrong reasons and frequency of blowing
the wrong reasons, set the time, operating time
and the evaluation.
RF remote control functions:
l) RF remote control: The instructor can start by remote control CPR, stop, pupillary changes,
with or without pulse, printers, and other
functions. Can also sense of judgment,
emergency call, pulse check, check breathing,
remove foreign bodies to be recorded.
m) The material characteristics: face skin, neck skin, chest skin, hair from high quality, and
durable material and should not distort while
decontamination and disassembly.
20 Child advanced
CPR (ACLS)
training Manikin with monitor &
printer:
Child advanced CPR (ACLS) training Manikin
with monitor & printer: Technical Specifications: a) Must combine the standards of the 2015
ACC-AHA & ECC guidelines, with up-
gradability to future revised guidelines.
b) Guide standards of implementation of
1 (one)
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 293 -
standards: the American Heart Association
(AHA), 2015 International cardiopulmonary
resuscitation (CPR) & Emergency
Cardiovascular Care (ECC). c) Anatomical features must be clear, feel real,
unified color, realistic shape, and aesthetic
appearance.
d) Must simulate vital signs: the initial state,
analog mydriasis, the carotid artery pulsation.
e) After successful treatment, the simulated human pupil must return to normal.
f) Must have feature of judging consciousness,
emergency call, pulse check, check breathing,
remove foreign bodies of five operations.
g) Artificial respiration and heart functions. h) Airway open manuvers.
I) Modes of operations: CPR training,
simulation, assessment and actual assessment.
j) CPR display functions:Electronically
monitored airway open and press parts.
Artificial respiration and external cardiac compressions and the correct number and the
number of errors.
220V power supply.
k) Recording & Printer Features: Choice of
operating simultaneously print operation and choice of operation after the resuscitation.
The printed transcript must cover covers the
mode of operation, the sense of judgment,
rescue breathing, pulse check, check breathing,
remove foreign bodies, each cycle of operation
the number of compressions and blowing, pressing the right / wrong number, press the
wrong reasons and frequency, inflatable the
right / wrong reasons and frequency of blowing
the wrong reasons, set the time, operating time
and the evaluation. RF remote control functions:
l) RF remote control: The instructor can start by
remote control CPR, stop, pupillary changes,
with or without pulse, printers, and other
functions. Can also sense of judgment,
emergency call, pulse check, check breathing, remove foreign bodies to be recorded.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 294 -
m) The material characteristics: face skin, neck
skin, chest skin, hair from high quality, and
durable material and should not distort while
decontamination and disassembly.
SL. NO.
NAME OF EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
REQUIREMENTS /QTY(FOR ESI-PGIMSR, JOKA)
Unit Cost (to be
filled in by
tenderers)
Total Amount
(in figure)
Buy back rate(i
n figures)
Final amount after reducing buy back
rate
DEPARTMENT. OF OBST. & GYNAE. ESI-PGIMSR, JOKA
1 Cardiotocographi
c fetal monitor
with Maternal
Monitor
Specification of Cardiotocographic fetal
monitor with Maternal Monitor.
Standard size colour TFT screen monitor
for display of wave forms and digital
Automatic fetal movement detection
facility in wave forms.
Standard twin pregnancy monitoring
system
Support for external thermal printer or ink
03 pcs
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 295 -
jet printer
Built- in rechargeable battery and AC/DC
power supply.
Built-in network capability.
24 hours monitoring, data storage and
reload capacity.
Fetal heart acceleration and deceleration
measurement ability
Fetal heart base line beat to beat variation
and acceleration, deceleration analysis
capability.
Printing functions with paper for
documentation.
Automatic monitoring mode and
convenient operation by manual/digital
keys and rotary knob.
Light and auto-alarm ability complying
with international standard.
OPTIONAL (Additional Specification):
Maternal monitoring parameters may be
present in addition to fetal monitoring
system.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 296 -
ECG
SPO2
NIBP
Respiratory rate
Temperature
Other parameters
2 Delivery Bed Specifications
Delivery Bed:
Overall size: 1880L X 900w X600-
800H mm.
Tubular Frame work mounted on
125 mm dia castor two with
breaks.
Three Section top made of MS pipe
with fixed cushioned mattress.
Height Adjustment preferably
Hydraulic height adjustment &
back section adjustment through
electric actuator system.
Trendlenburg/ Reverse
Trendlenburg Positions through
pneumatic pump.
Leg end section can slide under the
main section. Wheel lock system
must be present.
Provided with a pair of upholstery
lithonomy position.
02 pcs
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 297 -
SS telescopic IV Rod.
Detachable SS Tray. 3 MICROSCOPE MICROSCOPE SPECIFICATIONS
Optical System: UIS2 (Universal infinity-corrected) optical system
Illumination:
Built-in transmitted Koehler illuminator 6V/30W halogen bulb 100-120V/220-240V ~ 0.85/0.45A 50/60Hz
Focusing:
Stage height movement by roller guide (rack and pinion) Stroke per rotation: 36.8mm Full stroke range: 25mm Upper limit stopper Tension adjustment on coarse focus adjustment knob
Revolving Nosepiece: Fixed quadruple nosepiece with inward tilt
Observation Tube:
Type: U-CBI30-2, Binocular U-CTR30-2, Trinocular
Field Number: 20 20
Tube inclination:
Interpupillary distance adjustment range:
30°
48mm-75mm
30°
48mm-75mm
Light path selector: None
None (Bi 50%, Video/Photo 50% fixed)
02 pcs
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 298 -
Stage:
Size: 188mm(W) x 134mm(D)
Movement range: 76mm X-direction x 50mm Y-direction
Specimen holder: Double slide holder
Rubber grip: Equipped as standard
Condenser:
Type: Abbe condenser
NA: 1.25 with oil immersion
Aperture in iris: Built-in
Dimensions & Weight:
233mm(W) x 432mm(H) x 367.5mm(D), approximately 8.5kg (approx. 18.7lbs.)
4 Portable
Ultrasound
Machine
Specifications of Portable Ultrasound
Machine
1. The unit should be compact, light
weight, portable,sturdy and resistant to
break & damage..
2. It should be suitable for vascular
access (CVC placement,PICC) Nerve
blocks(Lower as well as upper
extremity),E-FAST examination, AAA
01 pc
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 299 -
Exam, small parts, applications in adults
and paed. patients and also suitable for
echocardiography & interventions.
Multiple preloaded applications presets
should be available for the above.
3. The unit must have real time
compound imaging for improved
contrast resolution & eliminating
ultrasound artifacts to achieve optimum
image quality.
4. The unit must have automatic gain
adjustment for B mode imaging
5. Scanning depth must be available up
to 35 cm.
6. System should support transducer
technologies like convex, linear and
phased array.
7. Imaging modes of real time 2D, color
Doppler, Pulsed wave Doppler,
Continuous wave Doppler and Power
Doppler must be available in all probes.
8. Simultaneous connectivity of at least
2 probes.
9. System must have fast start up to
scanning in less than 60 seconds as
essential in critical and emergency
situation in ICU, emergency & OT.
10. Cine memory on all modes
11. DICOM ready system with facility
to print along with printer, store, ready
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 300 -
to connect to PACS
12. Flat LCD/TFT monitor of at least
10” with flicker free image
13. Alphanumeric soft keys keyboard
with easy access scans controls, facility
to sanitize the system keyboard
14. to avoid cross contamination must
be available
15. Onboard storage of at least 10,000
images ,USB port for connectivity to
computer
16. Should be able to operate both on
AC and battery. Battery pack should be
self recharging and should last at least
for 2 hours when fully charged.
17. Transducers to be provide as
standard.
High frequency Linear transducer 6-
12 MHz with 60mm size for vascular
access, small parts, vascular,
muscuskeltal
interscalene,Supraclavicular,Axillary,Mu
sculocutaneus,Popliteal,Saphenous.
Higher frequency will be preferred.
Convex transducer 2-5 MHz for deep
nerve access specially Celiac,Sciatic
nerve,Epidural,Subgluteal & abdominal
applications.
Broad band phased array
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 301 -
transducer,1-5 MHz for accessing the
cardiac function & other related
application.
Needle guide must be supplied for
Linear & Convex probes along with 20
compatible needles with the unit.
18. System should be supplied with
trolley.
19. Valid US FDA/CE(European)/BIS
certification.
5 Digital Fetal
Doppler
Specifications for digital Fetal Doppler:
Fetal doppler CE approved, with
blue blacklight for dark sight
Easy operation for everyone, over
10 years quality satisfaction
Tm-100B Fetal Doppler CE
Approved
Ultrasound frequency : 2.5+-
0.25Mhz
Ultrasound output power :
10mW/cmDC
Power supply:9.6V rechargeable
battery
Working environment temperature :
10-40
01 pc
6 COLPOSCOPE 01 pc
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 302 -
TECHNICAL SPECIFICATIONS
COLPOSCOPE
1. Should be a basic model with
binocular tubes with inter papillary
adjustment and vertical stand.
2. Should have a working range with fine
focus of minimum 40mm.
3. Should have a 12.5x or 13.5x or 15x
eye piece.
4. Should have a standard objective of
working distance between 250 to
300mm.
5. The vertical stand should have at
least 4 wheels and at least 2 of them
should have breaking facility.
6. The vertical joint should be rotatable
and should have vertical height
adjustment.
7. The head should be tiltable and
should have positioning handle.
8. Should use a halogen light source
with coaxial illumination.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 303 -
SL. NO. NAME OF EQUIPMENT &
INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
REQUIREMENTS /QTY(FOR ESI-PGIMSR, JOKA)
Unit Cost (to be filled in by tenderers)
Total Amount (in figure)
Buy back
rate(in figures)
Final amount after reducing buy back rate
DEPARTMENT OF EYE 1 C-mount , camera,
TV Attachment for video
C-mount 1 Single Chip camera (Ex-stock) 1 Color TV (Ex-stock) 1
2 SLIT LAMP WITH MOTORIZED STAND
SLIT LAMP WITH MOTORIZED STAND Binocular Microscope Eye piece 10x16×25×40× Step magnification 8D compensation of ametropia Interpupilary adjustment : 50-80 mm Slit width: minimum 0-8 mm continuously adjustable Slit length: continuous from 8 mm to 1 mm minimum Slit angle : 0-180 degree continuous Slit Inclination: 5,10, 15,20 degree Filters: Blue, Red free , Grey & heat absorbing Bulb: Tungsten bulb Imaging facility
01pc
3 VISUAL FIELD
RECORDING
INSTRUMENT
TECHNICAL SPECIFICATION FOR VISUAL FIELD RECORDING INSTRUMENT
( PERIMETER SYSTEM) Specification:
Stimulus intensity 0.03 -10,000 Asb Stimulus Duration 0.1 – 9.98 secs
01 pc
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 304 -
Stimulus Wavelength Broadband visible light Maximum Bowl illumination 31.5 ASB GPA Software Testing features: Threshold Testing Library Central Field Testing Patterns: 30-2, 24-2, 10-2 Macula Peripheral Field Test Patterns: 60-4, Nasal Step Screening Test Library Central Field Patterns: C-40, C-64, C-76, C-80, C-Armaly Peripheral Field Test Patterns: P-60, DD-81, FF-120, FF-135, FF-246, FF-Armaly, Nasal Step Specialty Test Library Esterman monocular Esterman binocular Superior 36 Superior 64 Stimulous / background color White on white User defined test storage User features: Fixation Monitoring Heiji Krakau blind spot monitor Video eye monitor Trial lens Holder Remote video eye monitoring capability Operator interface Help Menu Touch screen on CRT Motorized chin rest Printer
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 305 -
Printex Thermal printer, table mounted Patient data input Name, Birth Date, ID, Trial Lens, VA, Pupil size IOP, C/D ratio, Diagnosis Code, Procedure Code, Comments
4 Flash Autoclave 1. Size: Minimum 20 Litre 2. Reservoir: 3 to 5 Litre 3. Tray: Minimum 3 in number 4. Air removal: vacuum pump 5. Total sterilization with vacuum dry:
shouldn’t take more than 30 min. 6. Exposure temperature: 121⁰ C/
134⁰ C 7. Fully automatic, microprocessor
controlled 8. Attached printer 9. European ‘B’ class certified
01 pc
5 PHACOEMULSIFI
ER Based on peristaltic pump
technology. o Crystal phaco hand
piece. o Multimode phaco
(Continuous / pulse / burst).
o Occlusion mode phaco. o Cool microincision phaco. o In phaco mode.
Vaccum level 0-500 mm Hg
Pump flow rate 0-50cc
o Continuous irrigation facility. o Bipolar diathermy with
01 pc
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 306 -
selectable power. o High speed anterior
segment vitrectomy preferably with electric cutter.
o Foot switch control for irrigation, I/A, phaco.
SL. NO. NAME OF EQUIPMENT &
INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
REQUIREMENTS /QTY(FOR ESI-PGIMSR, JOKA)
Unit Cost (to be filled in by tenderers)
Total Amount (in figure)
Buy back rate(in figures)
Final amount after reducing buy back rate
DEPARTMENT OF ANATOMY
REQUIREMENT OF LIST OF BONES: Technical Specifications:
1 Full skeleton 10 sets
2 Vertebral column 10 sets
3 Vertebral column with pelvis 10 sets
4 Articulated pelvis 10 sets
5 Full Skeleton Loose bones 10 sets
6 Full Skull with mandible attached 10 sets
7 Full Skull without mandible 10 sets
8 Cut section of skull 10 sets
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 307 -
SL. NO. NAME OF EQUIPMENT &
INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
REQUIREMENTS /QTY(FOR ESI-PGIMSR, JOKA)
Unit Cost (to be filled in by tenderers)
Total Amount (in figure)
Buy back rate(in figures)
Final amount after reducing buy back rate
REQUIREMENT OF ITEMS AND INSTRUMENTS Specifications
9 Tanks(portable)-STEEL(Accommodate at least 3 complete human bodies)
6 pcs
10 Student microscopes (Light) 50pcs
11 Revolving stools(Steel) 250 pcs
12 Dissection tables(full size) 15 pcs
13 Dissection tables(small size) 6 pcs
14 Student lockers 100 pcs
15 Full model human male and female (detachable)- Vinyl model
1 set each
SL. NO. NAME OF EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
REQUIREMENTS /QTY(FOR ESI-PGIMSR, JOKA)
Unit Cost (to be filled in by
tenderers)
Total Amount (in
figure)
Buy back rate(in figures)
Final amount after reducing buy back rate
Laminated Histology Charts and models and viscerae and Slides- provided separately MODELS/CHARTS FOR MUSEUM: Specifications
16 Full skeleton 3 sets 17 Vertebral column 3 sets
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 308 -
18 Vertebral column with pelvis 3 sets
19 Articulated pelvis 3 sets 20 Full Skeleton Loose bones 3 sets
21 Cardiac muscle 1 set 22 Skeletal muscle 1 set
23 Smooth muscle 1 set
24 Compact bone 1 set 25 Spongy bone 1 set
26 Spleen 1 set 27 Lymph node 1 set
28 Tonsil 1 set
29 Thymus 1 set 30 Trachea 1 set
31 Lung 1 set 32 Submandibular gland 1 set
33 Sublingual gland 1 set 34 Parotid gland 1 set
35 Tongue 1 set
36 Esophagus 1 set 37 Stomach(body) 1 set
38 Stomach (pylorus) 1 set 39 Liver 1 set
40 Pancreas 1 set
41 Duodenum 1 set 42 Jejunum 1 set
43 Ileum 1 set 44 Large intestine 1 set
45 Cecum with APPENDIX 1 set 46 Gall bladder 1 set
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 309 -
47 Kidney 1 set
48 Ureter 1 set 49 URINARY BLADDER with prostate 1 set
50 TESTIS with vas deferens 1 set 51 Ovary 1 set
52 UTERUS with uterine tube 1 set
53 Vagina 1 set 54 Thyroid 1 set
55 Suprarenal gland 1 set 56 Pituitary gland 1 set
57 Skin 1 set
58 Mammary gland 1 set 59 Spinal cord 1 set
60 Cerebrum 1 set 61 Cerebellum 1 set
62 Eye 1 set 63 Placenta 1 set
64 Umbilical cord 1 set
65 Ear 1 set 66 Tongue 1 set
67 Zona pellucida 1 set 68 Morula 1 set
69 Blastocyst 1 set
70 Sperm 1 set 71 Ovum-matured 1 set
72 Ovum-immatured 1 set 73 Placenta 1 set
74 Placental barrier 1 set 75 Turner syndrome 1 set
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 310 -
76 Kleinfelter syndrome 1 set
77 Fallot’s tetralogy 1 set 78 Velamentous placenta 1 set
79 Battledore placenta 1 set 80 Trilaminar germ disc 1 set
81 Bilaminar germ disc 1 set
82 Developing notochord 1 set 83 Neural tube defects 1 set
84 Physiological hernia 1 set 85 Developing foregut 1 set
86 Developing midgut 1 set
87 Developing hndgut 1 set 88 Devleoping heart 1 set
89 Descent of testis 1 set 90 Developing kidney 1 set
91 Anatomy of pouch of douglas 1 set 92 Developing male reproductive system 1 set
93 Developing female reproductive system 1 set
94 Developing brain 1 set 95 Developing tongue 1 set
96 Developing eye 1 set 97 Developing lens 1 set
98 Devloping inner ear 1 set
99 Developing pinna 1 set 100 Middle ear 1 set
101 Semicircular canals 1 set 102 Long bone of child showing blood supply 1 set
103 Long bone of adult showing blood supplyand ossification
1 set
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 311 -
104 Developing pituitary 1 set
105 Developing suprarenal 1 set 106 Neural crest cells and derivatives 1 set
107 Karyotyping 1 set 108 Development of diaphragm 1 set
109 Development of liver 1 set
110 Developmnt of spleen 1 set 111 Development of lungs 1 set
112 Bifurcaion of trachea 1 set 113 Larynx 1 set
114 Pharynx 1 set
115 Mandible 1 set LIST OF VISCERAE TO BE PROVIDED FOR MUSEUM DISPLAY PURPOSE IN GLASS VESSELS (MOUNTED) THORAX (MUSEUM)
116 Right lung 2 pcs
117 Left lung 2 pcs
118 Heart 2 pcs
119 Heart with pericardium 2 pcs
120 Trachea with oesophagus 2 pcs
121 Trachea 2 pcs
122 Diaphragm 3 pcs
ABDOMEN, PELVIS & PERINEUM (MUSEUM) 123 Liver 2 pcs
124 Kidney –right and left 4 each
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 312 -
125 Kidney (both) + urinary bladder 1pc
126 Spleen 4 pcs
127 Duodenum + pancreas + spleen 3 pcs
128 Stomach 4 pcs
129 Jejunum + ileum 3 pcs
130 Caecum with appendix 3 pcs
131 Rectum + anal canal 3 pcs
132 Small intestine 3 pcs
133 Large intestine 3 pcs
134 Male composite viscera 2 pcs
135 Female composite viscera 2 pcs
136 Urinary bladder with prostate gland 2 pcs
137 Urinary bladder 2 pcs
138 Testis right and left 4each
139 Perineum male 1 pc
140 Perineum female 1pc
BRAIN & SPINAL CORD(MUSEUM)
141 Spinal cord 4pcs
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 313 -
142 Meninges 3 pcs
143 Whole brain (both the hemispheres) 2pcs
144 Cerebrum - half brain (one hemisphere) 2 each
145 Cerebellum 3pcs
146 Cerebellum + brain stem 3 pcs
147 Brainstem 2 pcs
148 Cerebrum with brain stem 2 pcs
HEAD & NECK(MUSEUM) 149 Sagittal section
(showing pns, pharynx, larynx & nasal cavity)
3 each
150 Eyeball 12 pcs
151 Eyeball sagittal section 4 pcs
152 Eyeball coronal section 4 pcs
153 Lens 4 pcs
154 Thyroid gland with isthmus 3 pcs
155 Composite viscera (tongue + larynx+ pharynx)
4 sets
LIMBS (MUSEUM) 156 Axilla with arm 2 pcs
157 Cubital fossa 2 pcs
158 Palm 2 pcs
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 314 -
159 Wrist 2 pcs
160 Complete upper limb 3 pcs
161 Complete lower limb 3 pcs
162 Ts forearm 2 pcs
163 Ts arm 2pcs
164 Femoral triangle with back of thigh 2 pcs
165 Leg with foot 2 pcs
166 Ts thigh 2 pcs
167 Ts leg 2 pcs
SLIDE SETS REQUIRED 168 Cardiac muscle 50 sets
169 Skeletal muscle 50 sets 170 Smooth muscle 50 sets
171 Ts- compact bone 50 sets 172 Ts-spongy bone 50 sets
173 Hyaline cartilage 50 sets 174 Elastic cartilage. 50 sets
175 Fibro cartilage 50 sets
176 Artery 50 sets 177 Vein 50 sets
178 Spleen 50 sets 179 Lymph node 50 sets
180 Tonsil 50 sets
181 Thymus 50 sets
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 315 -
182 Trachea 50 sets
183 Lung 50 sets 184 Submandibular gland 50 sets
185 Sublingual gland 50 sets
186 Parotid gland 50 sets 187 Tongue 50 sets
188 Esophagus 50 sets
189 Stomach(body) 50 sets 190 Stomach (fundus) 50 sets
191 Stomach (pylorus) 50 sets 192 Liver 50 sets
193 Pancreas 50 sets
194 Duodenum 50 sets 195 Jejunum 50 sets
196 Ileum 50 sets 197 Submandibular gland 50 sets
198 Appendix 50 sets 199 Gall bladder 50 sets
200 Kidney 50 sets
201 Ureter 50 sets 202 Urinary bladder 50 sets
203 Testis 50 sets 204 Vas deferens 50 sets
205 Prostate 50 sets
206 Ovary 50 sets 207 Uterine tube 50 sets
208 Uterus 50 sets 209 Vagina 50 sets
210 Thyroid 50 sets
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 316 -
211 Suprarenal gland 50 sets
212 Pituitary gland 50 sets 213 Skin ls (thick) 50 sets
214 Skin (thin) 50 sets 215 Mammary gland (active) 50 sets
216 Mammary gland (inactive) 50 sets
217 Spinal cord 50 sets 218 Cerebrum 50 sets
219 Cerebellum 50 sets 220 Retina 50 sets
221 Cornea 50 sets
222 Placenta 50 sets 223 Umbilical cord 50 sets
224 Tongue 50 sets
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 317 -
225 CADAVER
STORAGE TANKS (Full SS)
CADAVER STORAGE TANKS (Full SS)
(Accommodate full human cadavers- at least 2 in each tank) Specification
1. OVER ALL SIZE: 72” (L) x 60” (W)
x 24” (H) WITH CASTER
2. FOUR SIDES ENCLOSED BY 1.6 MM SS SHEET 3. BOTTOM SHELVES MADE OF 1.6 MM SS SHEET
4. BOTTOM STRUCTURE MADE OF 40 X 40 X 6 MM ANGLE FRAME
5. LIDS MADE OF 1.2 MM SS SHEET (DOUBLE SHEET MOULDED) WITH ONE HAVING
HANDLE-6.
6. INSIDE ONE HAVING BOWL FOR DRAINAGE WATER. WHEN GET THE SOLUTION
7. RAISED INSIDE THE CABINET THEN CLOSED THE ADJUSTABLE KNOB. 8. MOUNTED ON 200 MM CASTER (HEAVY DUTY)
9. EVERY JOIN WITH ARGON WELDING.
10. FINISH WITH GLOSSY POLISH.
06 pcs
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 318 -
SL. NO. NAME OF
EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
REQUIREMENTS /QTY(FOR ESI-PGIMSR, JOKA)
Unit Cost (to be filled in by tenderers)
Total Amount
(in figure)
Buy back rate(in figures)
Final amount after reducing buy back rate
Department of Orthopedics 1 Prone position head rest (gel padded), dimensions:
280 x 240 X 140 mm adult size
01 pc
2 Universal patient positioner (gel padded) large, 380 X 140 X 80 mm for shoulder, lateral torso and under knees support adult size
02 pcs
3 Dome shape flat bottom gel positoner, large 510 x 150 X 125 mm (semicircular cushion positioner) for chest, pelvis and leg support in prone position, adult size.
02 pcs
4 High Definition Arthroscopy Set
Specification of High Definition Arthroscopy Set: True High Definition (HD 3 Chip) Camera System 1080p-1 No
720p, 1080i, 1080p Selectable Multiple digital outputs (HD & SD Outputs) Light source communication Electronic zoom (in p-modes only) Autoclavable Camera Head Shockflex prism mounting Resolution 1920X1080p, Light up card edge receptable Progressive scanning, Aspect ratio 16:9 2 Camera Head Buttons for 4 Remote
Fuctions 300W Xenon Light Source- 1 No
Automatically adjust to optimal light intensity
Auto Bulb saver function Stand by Mode
01 set
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 319 -
Homogenized Light distribution Light Guide Locking Mechanism OLED Window
Fiber Optic Light Guide Cable 5mm, Autoclavable-1 No High Definition Monitor- 1 No
24 '' or More Fully High Definition Monitor Fully compatible with HD and Digital
peripherals Sealed front panel in light-weight design with
VESA mount Wide-screen 16:9 aspect ratio PIP functionality Conntrast Ratio-1000:1 Resolution- 1920x1200
High Definition Arthroscope, 4mm, 30 deg, Autoclavable-1 No Arthroscope sheath- 1 No
5.9mm, Dual Stopcock system, Autoclavable, including Obturator
Shaver Console -1 No
Shaver Console 230 Volt Capacity to recognize the Hand piece, display
of speed The console should have option for
connecting Large Bone Drill & Saw Handpiece.
Shaver Hand Piece-1 No
500- 12,000rpm, 500- 2,500 cpm, Single and Multi-turn
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 320 -
Oscillate Chuck for small drilling (for shoulder anchors etc) -1 No
Shaver Hand Piece should adapt the chuck Cutters
Full Radius resector, 4.2mm, 13 cm-6 Nos Bendable Cutter-6 Nos Bender for bendable cutter-1 No
Wireless Foot control-1 No
3 pedal foot control Hand Instruments
Wide bite Straight punch-1 No Alligator Grasper-1 No Hook Probe-1 No 90 deg rotary puch,right 90 deg rotary punch,left
Arthroscopic Pump System-1 No
Easy to setup and use. Flow not less than 2 lt / min. Pressure ranging 30 - 150 mmHg Weight should not more than 7 lbs System should be supplied with auclavable
remote control Inflow / out flow tubing set-10 Nos Arthroscopy Trolley(Indian)-1 No
The System should be CE/US FDA Approved.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 321 -
5 C-ARM MACHINE (IMMAGE INTENSIFIER)
SPECIFICATION OF C-ARM MACHINE (IMMAGE INTENSIFIER) (C-ARM FULLY MICROPROCESSOR BASED SYSTEM WITH FEATHER TOUCH PANAL) IMAGE INTENSIFIER:
6 & 9 with high imaging System with high performance capability
CONTROL PANNEL & GENERATOR:
All operation on control panel k-board. Microprocessor based control with feather
touch panel. Generator unisearch IMD unit. Excellent fluoroscopy. Radiography output 25mA. On requirement Fluoroscopy: foot switch & on the control
panel. Kvp variation of 40 -110kvp. 3 step mode selection, normal (LIH), PULSE
and LIVE control. Digital kvp metering display. Digital ma metering display. Foot switch.
X-RAY TUBE HEAD (User Friendly Design):
Duel focus having 0.6mmand 1.8mm focus. Anode heat storage capacity 30kj. Anode cooling rate250 w/hr. Type of Generator – khz hf X-Ray Tube - Fluro 0.6mm X 0.6mm Focal Spot - 1.5mm X 1.5mm Fluro / Radio KVP - 40-110kvp Fluro mA - 0-4 mA Fluro Timer - 5 Minute
01 set
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 322 -
MAS - Up to 200 Power Requirement - 220V/50-60 hz & 3.5
kw Image Intensifier - 9 Inch
C-ARM FEATURE Rotation
360Degree Source to II Distance
90Cms Arc orbital Movements
110Degree Pann movements 0-
25Degree Horizontal Travel 22
cms Vertical motorized movement 32cms Detachable Cassette Holder (Option) 10” x
12”&8” x 10” TV MONITORS
15” / 17” Colour (Option) 625 Lines 50-60 hz High resolution display capability monitor.
MEMORY OPTION 26 frame memory Computer compatible (Option) 100 frame memory (Option)
6 Orthop
aedic Electric Drill System
Orthopaedic Electric Drill System:
04 pcs( against condemnation of Battery Operated Drill)
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 323 -
Driving Unit includes Motor, Stand, foot Control, Flexible Shaft-1Pc, Tool Kit, Oil Bottle & special container
Cannulated Drill Hand piece max. speed 1200 RPM & with Fixed S.S.Chuck (0-1/4”)
Reaming Handpiece with Max. Speed 400 R.P.M. Cannulated & AO type quick coupling.
Drill Chuck Adaptor with Jacob’s Stainless Steel Chuck (USA)
Pistol Grip Sagital Saw (Set of five blades) Flexible Reamers (2 pieces with reaming
pieces 6mm – 13mm)
7 DIGITAL ELECTRONIC TOURNIQUET
SPECIFICATION OF DIGITAL ELECTRONIC TOURNIQUET:
Cuff pressure range: 10 to 450mmHg. Pressure regulation: +/- 10mmHG of set
point. Online Setting: Increase and decrease in
pressure settings Timer: Timer range from 9hours to
59minutes. Internal least count: Timer
1minute/Internal 1/1000 second. Alarm & Display Indication:-
When set pressure is over When pressure goes 25mmHg
above set pressure. When pressure goes 25mmHg
below set pressure. In battery mode, when battery
voltage reaches 9V.
04 pcs
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 324 -
Memory: Pressure set in earlier session is stored and displayed, when machine is switched on again.
Pressure Table: Maintains set pressure under leak condition.
Backup: 3hours battery backup. (on full charge)
Switch over: Automatic switch over from offline to online (vise versa).
Power: 230V(AC)/50Hz ± 10% (Voltage fluctuations from 180-270).
Stabilizer: Inbuilt. Cuffs: Different Sizes of five cuffs—
washable & easy fitting (Paediatric, small, medium, big & large).
Digital Display: Digital Display of time elapsed, set time, actual and set pressure.
8 SMALL
FRAGEMENT INSTRUMENT SET
SMALL FRAGEMENT INSTRUMENT SET Content List:--
i. Drill Bit Q.C.End 2.5mm Dia—115mm
Length—2Pcs.,
ii. Drill Bit Q.C.End 3.2mm Dia—130mm
Length—2Pcs.,
iii. Counter Sink—6mm Head—1Pc.,
iv. Quick Coupling Handle—T-Type—1Pc.,
v. Tap with T-Handle for 3.5mm Cortical
Screw—2Pcs.,
vi. Tap with T-Handle for 4.0mm Cancellous
03 sets
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 325 -
Screw—2Pcs.,
vii. Drill & Tap Sleeve combined 2.5/3.5mm—
1Pc.,
viii. Insert Drill Sleeve 2.5mm—1Pc.,
ix. Screw Driver Shaft Q.C.End ---2.5mm Tip—
1Pc.,
x. Hexagonal Screw Driver 2.5mm tip—1Pc.,
xi. Small Depth Gauge—1Pc., Sharp Hook—
1Pc.,
xii. Small Neutral & Loaded Drill Guide—1Pc.,
xiii. Spanner—11mm—1Pc.,
xiv. Small Plate Bender—pair—1Pair.,
xv. Plier Cum Wire Bender—1Pc.,
xvi. K-Wire Bender—1Pc.,
xvii. Reduction Forceps—Serartted---Ratchet
Lock—140mm—1Pc.,
xviii. Reduction Forceps—Pointed---Ratchet
Lock—140mm—1Pc.,
xix. Self Centering Bone Holding Forceps—
190mm—1Pc.,
xx. Hohmann Retractor 8mm wide, short narrow
point, 160mm Length. 2Pcs.,
xxi. Hohmann Retractor 15mm wide, 160mm
Length—2Pcs..,
xxii. Periosteal Elevator ---Straight—160mm
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 326 -
length —8mm—1Pc.,
xxiii. Instrument Box with two trays length 300mm—1Pc.
9 LARGE FRAGEMENT INSTRUMENT SET
LARGE FRAGEMENT INSTRUMENT SET Content List:--
i. Drill Bit Q.C.End 3.2mm Dia—130mm
Length—3 Pcs.,
ii. Drill Bit Q.C.End 4.5mm Dia—130mm
Length—1Pc.,
iii. Counter Sink—8mm Head—1Pc.,
iv. Quick Coupling Handle—T-Type—1Pc.,
v. Tap with T-Handle for 4.5mm Cortical
Screw—2Pcs.,
vi. Tap with T-Handle for 6.5mm Cancellous
Screw—1Pc.,
vii. Insert Drill Sleeve 3.2mm—1Pc.,
viii. Drill & Tap Sleeve combined 3.2/4.5mm —
1Pc.,
ix. Drill & Tap Sleeve combined 3.2/6.5mm—
1Pc.,
x. Screw Driver Shaft Q.C.End ---3.5mm Tip—
1Pc.,
xi. Large Hexagonal Screw Driver 3.5mm tip—
1Pc.,
xii. Large Depth Gauge—1Pc.,
03 sets
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 327 -
xiii. Sharp Hook—1Pc.,Spanner—11mm—1Pc.,
xiv. Large Neutral & Loaded Drill Guide—1Pc.,
xv. Pointed Drill Guide with 4.5mm Tap Sleeve
& 3.2mm Drill Sleeve—1Pc.,
xvi. Large Plate Bender—pair—1Pair.,
xvii. Instrument Box with two trays length
300mm—1Pc.
10 BASIC
INSTRUMENT SET
BASIC INSTRUMENT SET Content List:--
i. Universal Open Hand Drill –2Pcs.,
ii. Wire Tightner Cum Wire Twister—1Pc.,
iii. Guide Wire Introducer with Four Pegs—1
Pc.,
iv. Plier Cum Wire Bender Cum Wire Cutter
–9” –1Pc.,
v. Wire Cutter Double Action Length
250mmm-1Pc.,
vi. Self Centering Bone Holding Forceps
150mm—1 Pair,
vii. Self Centering Bone Holding Forceps
240mm—1 Pair,
viii. Self Centering Bone Holding Forceps
280mm—1 Pair,
ix. Reduction Forceps –Serrated—Speed
03 sets
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 328 -
Lock—170mm—2 Pair,
x. Reduction Forceps –Serrated—Speed
Lock—200mm—2 Pair,
xi. Reduction Forceps –Serrated—Speed
Lock—240mm—2 Pair,
xii. Pattela Bone Holding Forceps –Four
Prongs—1 Pc.,
xiii. Lane Bone Holding Forcep with Ratchet
200mm—2 Pc.,
xiv. Lane Bone Holding Forcep with Ratchet
170mm—2 Pc.,
xv. Lane Bone Holding Forcep with Ratchet
200mm—2 Pc.,
xvi. Bone Cutting Forceps (Straight) Double
Action—190mm –1 Pc.,
xvii. Bone Cutting Forceps (Straight) Double
Action—270mm –1 Pc.,
xviii. Bone Cutting Forceps (Curved) Double
Action—190mm –2 Pcs.,
xix. Bone Cutting Forceps (Curved) Double
Action—225mm –1 Pc.,
xx. Chisel with Fibre Handles 5,10,20,30mm -
-- 1 Pc. Each.
xxi. Osteotome with Fibre Handle Straight
5.10.14.16.20mm—1 Pc. Each.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 329 -
xxii. Osteotome with Fibre Handle Curved
5.10.14.16.20mm—1 Pc. Each
xxiii. Bone Currette Double ended 4mmx6mm –
2Pcs.
xxiv. Bone Currette Double ended 6mmx9mm –
2Pcs.
xxv. Langenback Retractor---Small—1Pc.
xxvi. Langenback Retractor---Large—1Pc.
xxvii. Bristow Retractor---1Pc.
xxviii. Self Retaining Retractor—Small—2 pcs.
xxix. Self Retaining Retractor—Medium—2
pcs.
xxx. Self Retaining Retractor—Large—1 pc.
xxxi. Periosteal Elevator Curved—6,10,14,20---
1 Pc. Each
xxxii. Bone Hammer 200,350,500gms--- 1 pc. Each
11 Large External Fixator
Large External Fixator Rod of dia 11 mm in
– Carbon fibre – lengths 100 – 400 mm – carbon fibre rod, curved for pelvis
Clamp, clip-on self-holding, MR-safe Aperture for rods 11 mm Schanz screw 5mm with lengths 125 – 200
mm All instruments must be enclosed in a
Vario with lid with an insert for Schanz
03 sets
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 330 -
Screws The instruments should have Combination
Wrench of diameter 11.0mm The instruments should have Socket
Wrench of diameter 11.0mm,cannulated The instruments should have Combination
Clamp, clip-on, self-holding, MR-safe The instruments should have Clamp, clip-
on, self-holding, MR-safe The instruments should have Universal
Chuck with T-Handle The instruments should have Adapter for
Seldrill™ Schanz Screw with diameter 5.0 mm
The instruments should have Compressor, open
The instruments should have Short Trocar with diameter 3.5 mm
The instruments should have Long Trocar with diameter 3.5 mm
The instruments should have Handle for Drill Sleeve
The instruments should have Short Drill Sleeve 5.0/3.5
The instruments should have Long Drill Sleeve 5.0/3.5
The instruments should have Short Threaded Drill Sleeve 6.0/5.0
The instruments should have Long Threaded Drill Sleeve 6.0/5.0
The instruments should have Connecting Rod 5.0 mm, length 150 mm, Stainless Steel
12 Mediu
m Medium External Fixator
Rod of dia 8 mm in 03 sets
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 331 -
External Fixator
o Carbon fibre o lengths 120 – 320 mm
Clamp, clip-on self-holding, MR-safe Aperture for rods 8 mm Schanz screw 4mm & 5 mm with lengths
80 – 175 mm All instruments must be enclosed in a
Vario with lid with an insert for Schanz Screws
The instruments should have Combination Wrench with diameter 8.0 mm
The instruments should have Wrench, hexagonal with diameter 3.5 mm with T-Handle
The instruments should have Combination Clamp, medium, clip-on, self-holding, MR-safe
The instruments should have Clamp, medium, clip-on, self-holding, MR-safe
The instruments should have Drill Sleeve 4.0/2.5
The instruments should have Adapter for Seldrill™ Schanz Screw diameter 4.0 mm
The instruments should have Adapter for Seldrill™ Schanz Screw diameter 5.0 mm
The instruments should have Universal Chuck, small, with T-Handle
The instruments should have Short Trocar with diameter 3.5 mm
The instruments should have Long Trocar with diameter 3.5 mm
The instruments should have Trocar with diameter 2.5 mm
The instruments should have Handle for Drill Sleeve
The instruments should have Short Drill
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 332 -
Sleeve 5.0/3.5 The instruments should have Long Drill
Sleeve 5.0/3.5 The instruments should have Short
Threaded Drill Sleeve 6.0/5.0 The instruments should have Threaded
Drill Sleeve 4.0 The instruments should have Long
Threaded Drill Sleeve 6.0/5.0
13 Portable X-Ray Machine
Portable X-Ray Machine Specification;--- MICROPROCESSOR BASED DIAGNOSTIC 50 mA X-RAY MACHINE with following features
X-RAY TUBE UNIT –Oil filled stationary anode X-ray tube unit with focal spot 2.2 mm x 2.2 mm
RADIOGRAPHIC OUTPUT – mA Max mAs KV 50 250 45-55 40 200 60-75 30 150 80-85
KV SELECTOR – Select KV from 45 to 85 KV in 5 steps each
SUPPLY VOLTAGE COMPENSATOR – Adjust supply voltage from 180 v to 250 v automatically
LIGHT BEAM DIAPHRAGM Electronic DISPLAY – Digital display of mA
, KVp & mAs OVERLOAD PROTECTOR IN BUILT mAs SELECTOR up to 250 mAs
Portable Stand ( can be dismantle Into smaller Parts)
01 pc
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 333 -
SL. NO.
NAME OF EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
REQUIREMENTS /QTY(FOR ESI-PGIMSR, JOKA)
Unit Cost (to be filled in by tenderers)
Total Amount (in
figure)
Buy back rate(in figures)
Final amount after reducing buy back rate
PHYSIOTHERAPY DEPARTMENT
1 T.E.N.S Therapy unit
T.E.N.S Therapy unit >with 4 channel. >Micro computer based model >Digital display >Separate display for each channel intensity &Timer. >Pulse for TENS International standard:1-200 Hz/sec >Pulse width International standard:50-200micro sec. >Output current 1 - 60 ma for each channel. >Should have preprogrammed indication menu >Must have real time current sensing system with auto output off during poor contact for patient safety. >Mounted with trolley with wheel for easy transfer. >Should have international safety standard with CE certified.
01pc
2 Shortwave diathermy atleast 400 watt(micro processor controlled)
Shortwave diathermy atleast 400 watt(micro processor controlled) 1)High performance solid state generator with digital display. 2)High performance multi jointed arm 3)Continuous & pulsed mode(allows thermal & non thermal treatment) 4)Patient safety switch. 5)Must have CE certified. 6)Safety standard class 1 7)Captive & inductive applicator. 8)Frequency 27.12 Mhz 9)Must have disc electrode with adjustable arm.
01 pc
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 334 -
10)Pad electrodes for larger ,smaller & irregular surface area(small sinus electrode preferable) 11)Strap & other standard accessory preferable(knee jt,low back, upper back.)
Gymnasium Equipments
3 Suspension frame
Suspension frame with bed and all accessories
01pc
4 Multi gym or multi exerciser therapy unit
Multi gym or multi exerciser therapy unit
01pc
5 Quadriceps exercise table
Quadriceps exercise table with quadriceps hamstring torsion arm. Foam padded table & torque unit with two lever arm, Adjustable resistance.
01pc
6 Parallel bar adult
Parallel bar adult (height adjustable) 01pc
7 Static cycle
Static cycle >Dual shock absorber. >Adjustable tension. >Digital meter showing- Distance, speed,& calorie.
01pc
8 Complex exerciser unit
Complex exerciser unit should have suitable for shoulder elbow chest abdomen and lower limb exercise should be gradeable and adjustable for resistance foam padded table top on tubular frame the unit should be dimension 185-195 X 70-80 cm wide and the height should be 80 -85 cm complete unit consist of one table pan assembly and following attachement - ankle, hip, wrist,knee,abdominal and back
01pc
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 335 -
exerciser it should include strap, harness,and over head pulley systems different iron weight plates starting from 0.25 kg and 1 kg total upto 30 kg pelvic rest 1 quadriceps rest 1 supination pronation wheel 1 wooden cabinet for storage
Physical Fitness Equipments
9 Treadmill Treadmill - >Motorized at least 125 kg capacity, >AC motor : capacity >_2.0 H.P (peak>_4.0 H.P) >speed 1-18 kph, >Incline 0-16%, >convenient hand controlled speed &incline. >Quick speed, quick incline. >Easy incline, 5 program upland running. >Diverse speed & incliner program. >Self stop.
01pc
OCCUPATIONAL THERAPY
10 Fluidotherapy
Fluidotherapy it should be used for double extrimity simaltaneously operated in pulse or continious mode treatment time adustable adustable air speed machine should mounted with wheel or trolley safety standard class 1 digital display should have dry heat media (cellulose particles) with the machine as accessories
01pc
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 336 -
For hand exercise & rehabilitation
11 Finger Goniometer
Finger Goniometer 01pc
12 Goniometer
Goniometer 01pc
13 Peg board Peg board 01pc
14 Wrist circumductor
Wrist circumductor 01pc
15 Grip exerciser
Grip exerciser 01pc
16 Finger exerciser Table
Finger exerciser Table 01pc
17 Finger dexterity board
Finger dexterity board 01pc
18 Hand Gym kit board
Hand Gym kit board 01pc
General exercise items
19 Over head pulley
Over head pulley 01pc
20 Inclined sanding board
Inclined sanding board 01pc
21 Horizontal sanding
Horizontal sanding board 01pc
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 337 -
board
22 Shoulder wheel
Shoulder wheel 01pc
23 Balance board
Balance board 01pc
24 Foot placement ladder
Foot placement ladder 01pc
25 Bolster set
Bolster set 01pc
26 Wedge board set
Wedge board set 01pc
27 Quadriceps table
Quadriceps table 01pc
28 Stand in frame
Stand in frame 01pc
29 Trampoline
Trampoline 01pc
30 ADL training kit
ADL training kit 01pc
31 Low rise exercise platform
Low rise exercise platform 01pc
32 Cp prone stander
Cp prone stander 01pc
33 Cp chair Cp chair 01pc
34 Wheel Wheel chair for transfer training 01pc
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 338 -
chair for transfer training
35 Multiple gym exerciser
Multiple gym exerciser 01pc
Department of Orthopaedic (ESI Hospital , Manicktala)
1 DIGITAL ELECTRONIC TOURNIQUET:-
Cuff pressure range: 10 to
450mmHg. Pressure regulation: +/- 10mmHG
of set point. Online Setting: Increase and
decrease in pressure settings Timer: Timer range from 9hours to
59minutes. Internal least count: Timer
1minute/Internal 1/1000 second. Alarm & Display Indication:- When set pressure is over When pressure goes 25mmHg above
set pressure. When pressure goes 25mmHg below
set pressure. In battery mode, when battery voltage
reaches 9V. Memory: Pressure set in earlier
2 sets
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 339 -
session is stored and displayed, when machine is switched on again.
Pressure Table: Maintains set pressure under leak condition.
Backup: 3hours battery backup. (on full charge)
Switch over: Automatic switch over from offline to online (vise versa).
Power: 230V(AC)/50Hz ± 10% (Voltage fluctuations from 180-270).
Stabilizer: Inbuilt. Cuffs: Different Sizes of five
cuffs—washable & easy fitting (Paediatric, small, medium, big & large).
Digital Display: Digital Display of time elapsed, set time, actual and set pressure.
2 Titanium
Elastic Nails
instrument set
Titanium Elastic Nails
The nail should be available in diameters – 2.0, 2.5, 3.0, 3.5 and 4.0 and length 440mm to cover all indications
The nail tip should be designed in such a way that the insertion is easy and the nail glides along medullary canal.
The design of the nail should allow fracture reduction and facilitate nail manipulation.
The implant should be available in titanium
01 set
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 340 -
alloy (Ti-6AI-7Nb) that gives mechanical stability and elastic property.
The implant should have markings that allow direct rotational control of the nail tip in the medullary canal to reduce exposure to image intensifier
Titanium Elastic Nail set
The system should have a double drill Sleeve 4.5/3.2
The system should have a Drill Bit, 2.7mm dia., L 125/100mm 3-flute, for quick coupling
The system should have a Drill Bit, 3.2mm dia., L 195/170mm 3-flute, for quick coupling
The system should have a Drill Bit, 4.5mm dia., L 195/170mm 3-flute, for quick coupling
The system should have a Pin Wrench, 4.5mm, L 120mm
The system should have a Spanner Wrench for nos. 357.180/357.181
The system should have a Slotted Hammer 400g, detachable
The system should have a Locking Pliers that is flat nosed for TEN
The system should have a straight impactor and a bevelled impactor
The system should have an F-Tool The system should have an Awl that is curved
and has a sharp tip. The system should have an Extraction Pliers
with thread for TEN The system should have a Cutting Pliers for
TEN The system should have a Hammer Guide The system should have an Inserter The system should have a SYNCASE Silicone
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 341 -
Mat 170 x 460 mm The system should have a Lid for no. 675.420 The system should have a Tray, bottom, for
Instruments for 675.420 The system should have a Tray, middle, for
Instruments for 675.420 The system should have a Tray, top, for
Implants for no. 675.420 The system should have a SYNCASE Basic
Tray, height 145mm, neutral The system should have a Transport Case for
Syncase 3 Collinear
Reduction Clamp
The system should have a collinear reduction clamp with sliding mechanism that accepts four different attachment arms which can be mounted in four different positions using the mounting notches to accommodate various fracture types.
The cannulated feed rod of collinear reduction clamp should have a cannulation of ø 3 mm for temporary K wire fixation and a trigger for continuous and variable force application.
The reduction clamp should have a release button for adjustment of the attachment arm and release lever for the adjustment of the feed rod.
The system should have a reduction attachment for reduction against LCP plates for both large and small fragment plates which can be mounted
01 set
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 342 -
on the tip of feed rod. The system should also have a reduction
attachment for reduction against LCP/ LC - DCP plates and for reduction against the bone which can be mounted on the tip of feed rod.
The system should have a combination wrench of Ø 8.0 mm for mounting the reduction attachments
The collinear reduction clamp should have various attachment arms which give a reduction tool according to different clinical needs - Hohmann shaped arm; Pelvic Arm; Percutaneous Arm, Bone Hook Shape arm.
4 PULSE LAVAG
E SYSTE
M
1. Irrigation pressure electronically
controlled. 2. Autoclavable & reusable tubes of
medical grade silicon. 3. Complete Sterility is maintained. 4. Easy loading of the tube in the
machine. 5. Efficient peristaltic pump. 6. Water Resistance Display. 7. Foot control operate machine. 8. Pre Set features. 9. Four types of irrigation possible. 10. Inbuilt fuse and voltage control
rectifier. 11. Power Supply 230 V AC 50 Hz ± 10%
02 sets
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 343 -
12. Stainless Steel Body
SL. NO.
NAME OF EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
REQUIREMENTS /QTY(FOR ESI-PGIMSR, JOKA)
Unit Cost (to be filled in by tenderers)
Total Amount (in
figure)
Buy back rate(in figures)
Final amount after reducing buy back rate
Department of Pathology & Central Research Laboratory (for ESI PGIMSR, Manicktala)
1 CRYOSTA
T CRYOSTAT
1. Freely standing cryostat with chamber temperature down to -35°C. Actively cooled quick freeze shelf with optional 2 station Peltier unit for freezing down to -40°C with Specimen storage shelf to store up to 8 chucks.
2. Maintenance free microtome with section
thickness setting preferably from 1 to 100 µm. 3. Equipment must be suitable for sectioning of
specimen having diameter at least up to 50 mm & facility of Specimen orientation must be provided.
4. Vertical Specimen Stroke length: 56 mm or
above, Horizontal Specimen feed: Approx. 25 mm
5. Provision must be available for Motorized
(preferably at 600 μm/s &900 μm/s. – as rapid & slow respectively) coarse feed . Machine should have the Trimming facility via motorized coarse feed.
6. Blade holder system to hold both high profile &
low profile blade preferably simultaneously.
01 pc
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 344 -
Disposable Blade holder system must be provided with lateral displacement and integrated glass anti-roll guide.
7. Should have facility for UV disinfection.
8. Preferably have Ag Protect nanosilver coating.
9. Electronic locking key to avoid any inadvertent changes in program setting & closed drainage system to allow control disposal of fluids
10. Automatic hot gas defrost, 1 automatic defrost cycle/24 hours, selectable time .
11 Specimen retraction : 20 μm
12.Specimen orientation : X‐Y axis 8 deg and Z axis 360 deg
13. Instrument should be supplied with disposable blade holder for high and low profile blades, disposable blades (high profile and low profile), Specimen chucks, Brushes, Oil etc. 14. A 2 K.V.A online UPS also to be supplied with the instrument for at least 30 min standard backup.
2 SEMI-MOTORIZED ROTARY MICROTOME
SEMI-MOTORIZED ROTARY MICROTOME 1. Precision specimen orientation system with
clear zero reference point. 2. Force balancing system should be available for
effortless and uniform hand wheel rotation. 3. Section thickness setting from 0.5 to 100 μm,
with a provision of step-by-step increment.
02 pcs
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 345 -
4. Specimen feed of appx. 28 mm or above and vertical stroke length of 70 mm.
5. Trimming section thickness setting range: 5 – 500 μm with a provision of step-by-step increment
6. Precise specimen orientation of 8° in horizontal and vertical direction.
7. Coarse feed : motorized with variable speeds. 8. Knife holder base with lateral displacement
facility for utilization of the entire Blade edge with clearance angle indication
9. Hand wheel lockable at any position with
additional 12’O’clock locking by simply pulling the handle
10.Slot cover to protect the interior of the instrument from sectioning debris. specimen size: 50 X 55 mm
11. Section waste tray must be provided. 12. Section thickness indication-visual display.
13. System should be equipped with both High profile & 14.Low profile disposable blade holder. 15.5 packet of each blade (High profile & Low profile) to be supplied with the instrument.
16.2 K.V.A UPS also to be supplied with the instrument for standard 30 min back‐up.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 346 -
17.It should be CE/ISO certified .
3 FULLY AUTOMATED SLIDE PREPARATION SYSTEM
FULLY AUTOMATED SLIDE PREPARATION SYSTEM
1. The system must be walk away fully
Automated Slide Preparation system to process slides for Immuno Histo Chemistry, In Situ Hybridization, Silver In Situ Hybridization ,Immuno Fluroscence and should be able to process IHC with IVD approved p16 antibody for the stage detection of cervical cancer.
2. There should be options for varying temperature and incubation time.
3. The system must be fully automated to do baking, deparaffinization, antigen retrieval and staining within the same system .
4. The System should be open for Primary antibodies.
5. The system should be able to generate fully prepared 60 IHC Slides in a 9-10 hour shift.
6. The system must have individual Slide heaters for all the slide positions,slide temperature should be individually controlled.
7. The system should have a mechanism which
will be able to control evaporation and protect tissue integrity on each slides.
8. The reagents and the antibody should get mixed through air whirlpool and no mechanical
01 pc
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 347 -
part should be involved for mixing the reagents and antibodies.
9. Only 100 micro litre of Primary antibody must be required for all types of slides irrespective of the size of the tissue section.
10. There should be free supply of reagents, buffer s and DAB for the first 200 Slides.
11. The system should be able to recognize Slide Specific Barcode label which would provide automatic programming, patient and case identification.
12. The system should be US FDA certified.
13. Online UPS must be provided with minimum one hour back.
14. The system should have compatible computer
and software of latest technology available during installation. The software should be upgradable.
4 Real-Time PCR
Real-Time PCR:
1. The Real time PCR System must have International and/or National quality and safety certification, e.g. CE and/or UL/cUL and/or ISI certified and /or IVD certified.
2. The Real time PCR System should have an open platform system, and
musthave provisions for using third party kits and reagents for the molecular diagnosis of infectious diseases
01 pc
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 348 -
3. Ready to use DNA and RNA master mixes should be available 4. The Real time PCR System must at least have the following In vitro
Diagnostics approved kits available from the same manufacturer which are pre-validated on the quoted model :
Human Immunodeficiency virus Hepatitis B virus Hepatitis C virus Cytomegalo virus Epstein Barr virus Herpes Simplex virus
5. There should be provision for using the system as simple Thermocycler for qualitative molecular detection of infectious diseases.
6. System should be capable of running two different assays simultaneously in a
single run. 7. System should be able to run both standard mode PCR as also FAST mode
runs.
8. The Automated Real time PCR System should be accompanied with a desktop or laptop computer and printer system (required for the functioning and data storage and printing of reports) with original operating system and free software support for the lifetime of the machine. Systems should be supplied with latest Pentium computer with color monitor and printer. It should have an interface to laboratory host computer. System software should be based on Windows XP and validated for IVD application.
9. Remote data monitoring via connected/networked PC and download data
10. The Automated Real time PCR System should have already been installed in at least two (02) reputed Academic and / or Medical institutions and / or reputed accredited diagnostic laboratories in the Eastern region of India.
11. Thermal Cycler Mechanism:- Peltier based heating and cooling mechanism for maximum uniformity with even heating and cooling, with temperature accuracy of ±0.5°C and temperature uniformity of ±1°C.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 349 -
12. Calibrated dyes set on installation:- FAM/SYBR Green, VIC/JOE, NED/TAMRA/Cy3, ROX/Texas Red, Cy5. Calibration for new dyes within the wavelength range should be possible by following the custom dye calibration procedure in the User’s Manual without purchase of additional filter sets.
13. Sample Layout:- Should be flexible for the tube input volumes having capability of running 96 or more samples.
14. Any additional step of centrifugation of tubes while performing the assay
should NOT be there.
15. Should come with standard chemistries for gene expression, quantification, mutation scanning, allelic discrimination, genotyping and methylation studies. System should be able to add a melt curve during a run if required. Instrument should be able to distinguish between 5,000-10,000 DNA genome equivalents (a two-fold difference in copy number) with confidence level up to 99.7%.
16. Temperature range should be from 4°C - 98°C with a ramp rate of 1.2°C / sec and a ramp rate of 3.6ºC for FAST run. Peak block heating rate of 5.5°C.
17. Halogen lamp source with 5 different wavelengths with minimum cross-talks. The assay should not be based on one single wavelength of light. Should be able to detect all wells equally with same optical path length. Should maintain iso-optical detection in all wells for maximum uniformity with CCD camera.
18. System should be 5 color & capable for multiplexing. Should have 5 excitation filters and 5 emission filters to cover wide chemistries. Each sample in each well should be monitored with dedicated fiber optic bundle to have improved sensitivity for fluorescence measurement and to avoid cross talk.
19. Reaction Volume 5 μl-30 μl
20. Should NOT require any passive reference dye
21. System should use close tube process to avoid any cross contamination. 22.Software: Unlimited user Software license with maximum feature should come absolutely free of cost for the life of the machine, with additional features of creation of customer genotyping, DNA quantification, gene expression, and pathogen detection assays, resulting in creating template files that can easily be saved and used to run assays that require set protocols.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 350 -
5 MINI VERTICAL GEL SYSTEM
MINI VERTICAL GEL SYSTEM
1. Gel Size should be minimum 8.3 x7.3 cm (W x L)
2. Glass Plate Size minimum dimension should be
Inner - 10.1 x 7.3 cm
Outer - 10.1 x 8.2 cm
3. Should be IEC 1010/ CE Certified.
4. Same system should be able to perform western blotting, 2D/tube gel electrophoresis & electro elution also.
5. No. of wells: 10, thickness: 1.0 mm
6. The system should accommodate upto 4 handcast or precast gels at a time.
7. Typical run time should be less than an hour
8. Buffer volume: Less than 200 ml for each of the chambers
9.Should come with the facility to run 4 gels together with companion running module.
10.Buffer volume : 700 ml for 2 gels and 1000 ml for 4 gels.
11.Same System Should be compatible with electroelution and western blotting in the same tank
12.Should come with consumables for at least 100 reactions.
01 pc
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 351 -
13.POWER SUPPLY:-
• Voltage Output range (programmable): 5-250 V, fully adjustable in 1 V increments;
• Current Output range (programmable): 0.01 to 3.0 A, fully adjustable in 0.01 A increments
• Power output range (programmable): 1-300 W, fully adjustable in 1 W increments
Output Type: Constant voltage, Current or Power with
automatic crossover
Output terminals: 4 pair recessed banana jacks in parallel
Pause / resume function should be available.
2-line, 16 character backlit LCD is preferred.
Add-on safety features like “No-load” detection, rapid resistance change detection, ground leak detection;
overload / short-circuit detection; overvoltage protection; over-temperature protection are must. The system should comply with EN61010 or equivalent safety compliance.
Input protection: Fuse on hot and neutral.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 352 -
6 SEMIDRY TRANSBLOT SYSTEM FOR WESTERN BLOTTING
SEMIDRY TRANSBLOT SYSTEM FOR WESTERN BLOTTING
• The system should allow fast, efficient and economical blotting without buffer tank or gel cassettes.
• Spring mounted platinum coated titanium
anode and stainless steel cathode plate electrode to provide consistency and reproducibility in results, durability and extended life-span of the equipment.
• Maximum Gel Size should be 24 cm x 16
cm
• The system should be capable of transferring multiple gels simultaneously.
• Current requirement should be upto
3000mA.
• Special agarose gel support frame for performing southern blotting in the same system as an add-on facility would be preferred.
• Should come with consumables for atleast 100 runs
Power pack should have maximum output: 250V, 3.0A, 300W with the programmable facility for each parameters are as follows.
• Voltage Output range (programmable): 5-250 V, fully adjustable in 1 V increments;
1 pc
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 353 -
• Current Output range (programmable):
0.01 to 3.0 A, fully adjustable in 0.01 A increments
• Power Output range (programmable): 1-
300 W, fully adjustable in 1 W increments
Output Type: Constant voltage, Current or Power
with automatic crossover
Output terminals: 4 pair recessed banana jacks in parallel
Timer: up to 99 hr, 59 min
Pause / resume function should be available.
2-line, 16 character backlit LCD is preferred.
Add-on safety features like “No-load” detection,
rapid resistance change detection, ground leak detection; overload / short-
circuit detection; overvoltage protection; over-temperature protection are must.
The system should comply with EN61010 or
equivalent safety compliance.
Input protection: Fuse on hot and neutral.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 354 -
SL. NO. NAME OF
EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
REQUIREMENTS /QTY(FOR ESI-PGIMSR, JOKA)
Unit Cost (to be filled
in by tenderers)
Total Amount
(in figure)
Buy back rate(in figures)
Final amount after reducing buy
back rate
7 Fast
blotting
system
Fast blotting system
1. Fast blotting system for blotting four
gels simultaneously
2. Should have USB ports for filmware transfer
3. System should have a cooling fan
4. should have inbult power pack supply
5. should have user interface
6. should have an audible alarm
7. should have user notification with
following features
power fail during run
no load detection
no cassette detection
end of run
8. should have user defined programmable methods minimum 25
01 pc
8 ELECTROPORATOR
ELECTROPORATOR
1. Electroporator system with the capability to electroporate eukaryotic
01 pc
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 355 -
cells, prokaryotic cells (bacteria), yeasts and other microorganisms.
2. Instrument should have features for adjusting voltage & pulse length
3. Pulse Voltage range : 10-3,000 V
4. Should include all accessories for electroporation
5. It should also have required
software, pre-set optimized programmes and other accessories
9 MILLI Q
WATER PURIFICATION SYSTEM
MILLI Q WATER PURIFICATION SYSTEM The complete water purification system should comprise of two stages as below: Stage I Stage 1 of the system must comprise of the following:- The tap water supply generally has a particulate reading of 1200 ppb. A suitable pre-filtration system for bringing the concentration from 1200 ppb to 100 ppb before use with the R.O. System should be provided. RO water system with a dispensing rate of 1 Liter per minute or better and large cartridges of over 20 inches each for a long life. The removal efficiency of the RO water
01 pc
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 356 -
system should be as follows:- Suspended solids- 100%, Bacteria - 99.5%, Viruses -99.5%, Pyrogens - 99.5%, Organic, molecular weight >250 daltons - 97-99.5%, Monovalent inorganics - 94-96%, Divalent Inorganics - 96-98%, Trivalent Inorganics- 98-99%. The water quality should be suitable enough for general microbiology, general immunology and other activities such as glassware washing, deionization systems, glassware rinsing, buffer solution preparation, standard solution preparation etc. 2 extra prefilter, carbon filters ( total 3 each) to be included. Storage tank of around 15 -20 Liter at outlet of RO. System should include automatic flush valve, which extends RO membrane life: It should automatically initiate the purification process by flushing the RO membrane and tank for three minutes after each 12 hour period of inactivity. STAGE II For Ultra pure water Water quality must be good enough for Inorganic analysis: Ion chromatography, Inductively coupled plasma/mass spectroscopy, Atomic absorption, flame emission spectroscopy, trace metal analysis, Organic analysis such as Liquid chromatography, HPLC, Gas chromatography, Electrophoresis, Total organic carbon, Tissue culture, Clinical, General Microbiology, General Immunology,
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 357 -
Recombinant DNA etc. Purification technique used / filters included to be as follows :- Carbon filtration, De-ionization - 2 no’s of polishing grade mixed bed, Organic adsorption cartridge, Ultrafiltration 0.1 micron, Ultraviolet reactor ( with dual wave length of 185 & 254 nm), hollow fiber filter (optional). Smart independent dispensing system (Dispensing Gun) for low volumes of ultra pure water. In line pressure regulator. Dispensing flow: 1.5 - 2 L /minute of Type I or 1 L/ m with hollow fiber filter Extra membranes to be included within the offer: Pre-filters and Carbon Filters for RO system :- 18 No.’s each R.O. : 2 No.’s Polishing Station / Ultrapure Station : 2 Sets each complete. All items necessary to operate equipments must be quoted.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 358 -
SL. NO. NAME OF
EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
REQUIREMENTS /QTY(FOR ESI-PGIMSR, JOKA)
Unit Cost (to be filled
in by tenderers)
Total Amount
(in figure)
Buy back rate(in figures)
Final amount after reducing buy back rate
10 LIQUID NITROGEN VAPOUR STORAGE SYSTEM
LIQUID NITROGEN VAPOUR
STORAGE SYSTEM
1. Liquid Nitrogen (LN2) storage system for long term preservation of Frozen samples in 100% vapor phase at -190 degrees Centigrade with no contact of sample with lLN2
2. Should be jacketed model
3. Capacity for at least 30 litres of LN2 in outer jacket
4. Minimal interior temperature gradient
from bottom of Chamber to below the lid
5. LN2 level indicator and safety relief
valve should be present
Minimum 8000 of 2ml cryovial storage capacity in racks and boxes (all racks and cryoboxes should also be provided with 1 set spare rack and its set of boxes)
6. LN2 system should be safely
mounted on castors for easy and safe mobility when when loaded
7. Automated real time display monitor
below the lid
8. Automatic filling and control of LN2
01 pc
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 359 -
level
9. Alarms for deviations from set values of level and temperatures
10. Self diagnosis at start up
11. Program lock to prevent
unauthorized intervention 12.Should have temperature log software for monitoring the parameters continuously and its history 13.Liquid Nitrogen Cylinders (2 in number) to connect to the storage vessel in order to automatically re-fill LN2 in the storage vessel as and when required. Capacity of Cylinders to be minimum 200 litres each, 22 PSI liquid delivery, equipped with LN2 level and pressure gauges and safety relief valve and mounted and restrained on castors for easy mobility.
14.Should be connected through Y connection: 1, LN2 transfer hoses 03.
15.Should have inventory system for 2 ml cryovials
16.Racks should have locking system to prevent fall out of sample storage boxes
17.Should provide 2 sets of LN2 safe cryogloves IQ/OQ/PQ validation documents should be provided
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 360 -
11 BIOSAFETY CABINET( Class II type B2)
BIOSAFETY CABINET( Class II type B2)
1. Biosafety cabinet Class II type B2 with 100% exhaust for cell and tissue culture work.
2. Compliant with standard norms for biological safety, air quality, filtration and electrical safety.
3. Should allow working with agents assigned as BSL – 1& 2.
4. 4 feet wide with internal working area of at least 6 square feet.
5. Programmable microprocessor controlled operation.
6. Single piece stainless steel working
tray without welded joints to collect contamination or rust.
7. Robust dual wall cabinet construction with negative pressure plenums around the work zone.
8. High performance, long life fan
systems (HEPA/ULPA) with efficiency of air filter >99.9%.
9. Average airflow: Inflow – 100fpm or higher, Downflow – 60fpm or higher
10. Low noise level (<60dBA) and
vibration free.
11. Adequately illuminated work zone with provision of UV light for decontamination.
12. Digital display for Air flow, UV, etc
with timer function for UV light. 13. Front window/sash should be made
01 pc
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 361 -
of non-reflecting, laminated safety glass.
14. Should be provided with electrical
outlet, water/media and gas inlet. 15. Should have supporting stand with
wheels, foot-rest and adjustable lab chair
12 CO2
INCUBATOR
CO2 INCUBATOR
1. System : A system with access port and reversible doors, Alarm for CO2 level and temperature and rounded corners in Inner chambers
2. Contamination control : Preferably by Copper mixed alloy interior chamber with UV light / HEPA Air filter
3. Capacity : 160-225 litres
4. Model/Body : Low profile, stackable
5. Temp. Range : RT + 5ºC to 50ºC
6.Temp. Uniformity : ± 0.3ºC or lesser 7.Temp. Control : ± 0.1ºC or better using microprocessor based accuracy technology with digital display 8.Humidity : 95% ± 5% RH 9.CO2 Range : 0-20% with accuracy of ±0.2% or better
01 pc
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 362 -
10.CO2 Sensor : Infra-red based sensor 11.No. of Shelves : 4 or more
12.Other Feature : The system should have International QC certification and be supplied with CO2 cylinder
13 SONICATOR
SONICATOR
1. Model should be probe based, compact, benchtop size, programmable and suitable for cell disruption and homogenization.
2. Power rating 500W or higher with working frequency of 20-25 kHz.
3. Piezoelectic based converter with
required converter cable.
4. Amplitude setting range 20% to 100% or better.
5. Programmable timer with adjustable
pulse sonication.
6. Efficiency 90% or higher.
7. Supplied with standard probe (with replaceable tip) along with additional probes for sample volume 0.2ml to 250ml.
8.Digital display for monitoring parameters like wattage, amplitude and energy. 9.Jack stand, mounting system and sound proof box included.
01 pc
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 363 -
10.Inbuilt overload protection. 11.Lead free and ROHS compliant.
14 SHAKER INCUBATOR (Refrigerated)
SHAKER INCUBATOR (Refrigerated) 1. Model : Refrigerated table top shaker
with provision of stationary tray for incubation of petridish/ culture plates and clamp sets for flask of different sizes (100ml to 2 litre)
2. Body : Exterior : Made of steel
1. Interior : Made of stainless steel
3. Temperature range : 10ºC - 75ºC or
better
4. Temperature accuracy : ± 0.5ºC
5. Shaking Amplitude : 25mm/ 30-350 rpm with ± 2% deviation
6. Tray size : 40 cm X 40 cm or bigger
7. Other features : Accurate PID control
for temperature reliability.
8. Timer and alarm for speed and temperature.
9. Fluorescent lighting and UV for
decontamination.
01 pc
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 364 -
10. Safety device for overload and overheating protection
15 MIXER FOR MOLECULAR ANALYSIS AT VARIED TEMPERATURE
MIXER FOR MOLECULAR ANALYSIS AT VARIED TEMPERATURE
Bench top model with small footprint with heating, cooling and mixing functions Facility for interchangeable block (with automatic block recognition feature) to accommodate plates and tubes ranging from 0.2ml to 50ml, Touch keypad with digital display of time, temperature and mixing speed, All three parameters to be freely programmable.
Mixing: circular with anti-spill technology for efficient mixing without wetting and contamination in tubes and plates and mixing frequency up to 30000 rpm.
Temperature: Peltier based system,
temperature range from 150C below ambient to 1000C accuracy of ±0.50C at 20-450C, heating rate of at least 60C/minute and cooling rate of
01 pc
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 365 -
2.50C/minute.
Heated lid to prevent condensation on lid and sides of the tube.
To be supplied with block for 24x1.5ml
Micro Centrifuge tube. 16 AUTOMA
TED NUCLEIC
ACID WORKSTATION/N
A PURIFICATION
SYSTEM
AUTOMATED NUCLEIC ACID WORKSTATION/NA PURIFICATION
SYSTEM
• Should be a complete compact automated nucleic acid
isolation/purification workstation.
• Should be able to process 8
samples at a time.
• Sample volume 100-1000µl
• Elution volume 50-200µl
• Should able to process broad variety of samples types including
whole blood, blood cells, plasma, fresh or FFPE tissue, body fluids, cultured cells, bacteria, clinical sample. (Should free from cross-contamination &can be used for PCR/RT PCR reaction.)
• Run time should be 20-25
minute or less according to batch size.
01 pc
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 366 -
• Should be based on Magnetic
bead technology for isolation of Nucleic acid. (DNA/RNA/TNA)
• There should not be use of any
manual steps & no other external device like vacuum pump or tubing/pumps are required.
• Should have preinstalled
protocols & no external program cards are allowed.
• Should have integrated HEPA
filter, UV decontamination for less
cross contamination as well as bar code scanning facility for easy sample tracing including tip loss & clot detection.
• Should be provided with starter
Nucleic acid (DNA/RNA) purification/isolation kit.
• All international certificates
including CE, CB & original software license should be provided.
• Power supply 100-240 vac + /-
10%50/60HZ+/-5% 17 VERTICA
L -80°C FREEZE
VERTICAL -80°C FREEZER
1. Temperature range -50°C to -86°C and
01 pc
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 367 -
R
adjustable with a setting accuracy of +1°C
2. Internal capacity should be minimum 400 litres and should accommodate 15 racks, 240 boxes of 2” height to keep 24000 nos. 2ml vials at least
3. Powder coated solid outer cabinet to prevent corrosion
4. Inner cabinet should be made of oxidation free, rust free and scratch less stainless steel
5. Should have 5 chambers with 4 height adjustable shelves, each chamber should have individual inner door to prevent cold loss
6. Full racks and boxes should be quoted 7. Must maintain -86C° even at ambient
temperature of 32°C 8. Pull down time should be < 5 hrs 9. Microprocessor control for operation
with integrated audio visual temperature alarm function with digital monitoring display.
10. Must have auto restart function after power failure with non-volatile memory
11.Should have automatic reset function to protect the microprocessor controller from damage by electrical spikes 12. Battery back for display and alarm during power cut. 13. Should provide electronic chart recorder system with integrated alarm and auto-dialer facility. By this, user should be able to access data anytime from anywhere using internet, it should to warn the user about the freezer malfunction through phone and email notification. Historic data recording i.e graph should be viewed by hours, days or months
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 368 -
with atleast three months data displayed at one time 14.Heavy duty hermetically sealed two stage compressor ( 4x¾HP) to maintain inner temperature below -86°C 15.Refrigerant should be CFC free 16.Should have space saving foot print (WxD): 80 x 86cm 17.Should have diagnostic software for fault condition. 18.Should provide C02 back up system with all necessary set ups i.e CO2 cylinder etc
19.Should have heated air vent to ease the door open during vacuum formation within the chamber 20.Power consumption should be < 8.5kWh/day 21.One fan circulation to lower the noise and power consumption 22.Insulation should be of 130mm thick with combination vacuum insulation panel and polyurethane foam. Vacuum insulation should have metal coated polymer film barrier seal to maintain vacuum strongly. 23.Should have lockable castors for free and easy mobility 24.To be operational on 220 to 240 Volts at 50 Hz. Single phase 25.Should have CE and UL certification 26.Should be supplied with compatible voltage stabilizer
18 Binocular LED Microscope
Binocular LED Microscope
1. Microscope should have Infinity Corrected Optical system for Bright field applications.
2. Microscope should have right hand
10 pcs
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 369 -
stage Stand with 4 positions Nosepiece, Universal Power Supply, Mechanical stage with non-extending rack and slide holder, Long life LED Illumination with Auto off facility, built in handle and cord wrap. Dust cover, Manual.
3. Binocular tube with 30° inclination for easy viewing.
4. Magnification from 40X to 1000X with 10 X eyepieces with Objectives of 4x,10x,40x & 100x (OIL)
5. FOV should be 20mm 6. IPD should range from 52mm –
75mm 7. Abbe Condenser 0.9A dry with
relevant sliders. 8. Should have integrated vertical
handle for easy carrying & easy lifting with integrated cord wrap to eliminate damage to microscope components.
9. Slide holder should be student friendly to avoid slide chipping.
10. Should have transmitted LED illumination of 6000K temp., 25,000hrs. life at full intensity-providing cool white light with a lifetime of at least 20 years for cost saving
11. Stage should maintain its dimension with round edges eliminating chance of injury with additional protection from friction damage.
12. Preferably AgTreat (anti microbial) to be incorporated for eliminating growth of bacteria
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 370 -
13. Should have time delay shut off automatically to save energy with disabled & enabled option also.
19 PLATELE
T
FUNCTIO
N
ANALYSE
R
PLATELET FUNCTION ANALYSER
1. Must be suitable for Simple, rapid and precise assessment of platelet function
2. Accurate detection of inherited, acquired or induced platelet dysfunction
3. Detect vWD 4. Detect platelet P2Y12 receptor
blockades in patient undergoing therapy with P2Y12 receptor antagonist
5. Start up reagent and cartridge for 100 tests
6.Test system Principle: High-shear force dynamic flow system • Measuring channel: Single measuring channel • Incubation category: Two incubation wells • Incubation temperature: 37.9 °C ± 1.0 °C • Incubation warm-up time: < 15 minutes (room to operating temperature) • Trigger solution: Illuminated trigger solution viewing area 7. Sample Handling • Type of sample: Citrated whole blood • Sample mechanism: Manual
01 pc
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 371 -
pipette dispensing (800 μL) • Barcode identification: external barcode reader for sample identification 8. Reagent Handling • Type: Single disposable self-contained test cartridges • Reagent recognition: Positive optical coding reagent cartridge identification • Additional reagent: Trigger solution 9. Throughput • Single test: P2Y, Col/EPI, or Col/ADP: 6 tests/hour • Duplicate test: Col/EPI or Col/ADP: 10 tests/hour 10.Software • Interface: Color LCD touchscreen • Host connection: Unidirectional, external RS-232 DB-9 port or ethernet network • Stored patient results, control results, and maintenance events: Last 1,000 results • USB port: Software updates, printer, barcode scanner,and result export • Quality control: Built in • Onboard help • Instrumentation status: Clear status messages (red, yellow, and green) 11. Power Supply • Operating voltage: 100 – 240 VAC • Main frequency: 50 – 60 Hz • Current (maximum): 1.38 A @ 90 VAC 12.Environmental Conditions • Operating temperature: 18 °C – 29 °C
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 372 -
• Non-operating storage: -29 °C – 50 °C • Relative humidity: 20 – 90 % • Operating humidity: 20 – 90 % RH (non-condensing) • Non-operating storage humidity: 0 – 95 % RH (non-condensing) • Degree of protection: according to IEC 60529 • Heat emission: 94 kcal/h (375 BTU/h) 13. Online UPS with 30 minutes backup
20 BLOCK
CABINET
BLOCK CABINET
1. Made of CRC sheet duly powder
coated.
2. Should have index card holder
and handle for each drawer.
3. Should be provided with lock
and key
4. Capacity 20000 blocks
02 pc
21 SLIDE
CABINET
SLIDE CABINET
1. For placing slides in horizontal
manner
2. For safe and easy handling of 75
× 25 mm slides.
3. Made of mild steel sheet.
4. Well designed for performance
and durability.
5. Powder coated paint outer finish
with smoothly working doors
fitted with handle, lock and key.
02 pc
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 373 -
6. The anodized aluminium slide
strays for holding 75 × 25 mm
slides, have been arranged
separately so as not to disturb
other compartments while taking
out or putting in the slides.
7. The size of the tray approx 350
× 210 × 35 mm and nicely fitted
with uniformly slotted aluminium
carrier each holding slides in
horizontal position.
8. Fitted with index card holder.
9. Capacity 20000 slides.
22 UV Sterilization cabinet
UV Sterilization cabinet
1. Destroys unwanted PCR products in less than 30 minutes
2. Built in timer control 3. Protects the sample from user
contamination 4. Protects the user from Biohazard
samples 5. Four powerful, timer controlled
UV tubes, combined with
optimal reflectors, provide efficient irradiation of the
complete work surface 6. Doors equipped with safety
cutouts 7. To be provided with safety
trays and easy to clean tray
liners 8. Safety interlocks on the cabinet
doors prevents the user from
any exposure to the UV light
01 pc
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 374 -
9. To be provided with required
accessories such as height
adjustable stool, etc
23 Micro Centrifuge for 0.2ml PCR
tubes
Micro Centrifuge for 0.2ml PCR tubes
1. Quiet and reliable. 2. Small foot print. 3. Independent on/off switch 4. 2 place rotor for 8x0.2 ml tubes 5. 6 place rotor for 1.5ml tubes 6. Fixed speed of 6000rpm/2000g
04 pcs
24 Micro Centrifuge for 1.5
ml/0.5ml PCR Tubes
Micro Centrifuge for 1.5 ml/0.5ml PCR Tubes
1. Quiet and Reliable
2. Small foot print 3. Built in power supply 4. Digital display of time and speed
5. Standard 6 place rotor for 1.5 ml tubes
6. Spare 12 places rotor for 0.5 ml tubes
03pcs
25 Vertic
al
Lamin
ar Air
Flow
Cabin
et
Vertical Laminar Air
Flow Cabinet 1. Inner work surface width a
minimum of 2 feet for easy handling of samples
2. Laminar Air Flow Cabinet should be tested for cross-
contamination and product protection using microbiological test methods specified in
02 pcs
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 375 -
EN12469.
3. Sentinel Microprocessor-Based Control & Alarm System
4. ISO Class 4 Air Cleanliness 5. Front Sliding sash
6. Cabinet Construction a. Main Body : 1.2 mm /
0.05”/ 18 gauge electro-galvanised steel with white oven-baked epoxy
powder-coated finish b. Work Zone : 1.2 mm
(0.05") 18 gauge Stainless Steel, grade 304, 4B finish. Single
piece stainless steel work surface with a curved
front edge for maximum operator comfort
a. Side Walls : Colourless
and Transparent UV absorbing tempered glass
to enhance visibility inside the work area.
7)Raised Front edge.
8)Temperature compensated Air velocity sensor.
9)HEPA Filter Typical efficiency - 99.99 % for particles size at 0.3 microns.
10)Additional disposable pre-filter with 80 % arrestance to trap large particles
in the inflow air prior to reaching the main filter, protecting against damage and prolonging filter life.
11)External surfaces should be powder
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 376 -
coated with Isocide Anti-microbial
coating to eliminate 99.9 % of surface bacteria within 24 hours of exposure.
12)Permanently lubricated, high performance, energy efficient,
centrifugal motor/fans. less electrical energy consumption. Completely
integrated assembly to optimize motor cooling. All rotating parts should be balanced for smooth, quiet and vibration-free operation.
13)Sound Emission : < 61 dBA as per IEST-RP-CC002.2
14)Electrical 220-240V, AC.
15)To be provided with additional accessories-
I. Support stand with adjustable height.
II. UV lamp for decontamination.
III. Ergonomic height adjustable Lab chair.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 377 -
SL. NO. NAME OF
EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
REQUIREMENTS /QTY(FOR ESI-PGIMSR, JOKA)
Unit Cost (to be filled
in by tenderers)
Total Amount
(in figure)
Buy back rate(in figures)
Final amount after reducing buy back rate
26 Class II
Biological Safety Cabinet Type A2
Class II Biological Safety Cabinet Type A2
1. Size atleast 1.2 X 0.6 X 0.6
meters 2. EN 12469 Certified
3. Recirculation 70% & Exhaust 30%
4. Average Air Flow Velocity:
(1)Inflow : 0.45 m/s (90 fpm) at initial setpoint,
audible/visual alarm should activate at 0.40 m/s (80 fpm)
(2) Downflow : 0.30 m/s (60 fpm) at initial setpoint
with uniformity of better than +/- 20%
5. Noise Level < 62 dBA
according to EN 12469 6. Cabinet Construction:
1. Main Body: 1.2 mm (0.06") 16 gauge electrogalvanized steel with
white oven-baked epoxy antimicrobial powder coated
finish Work Zone: 1.5 mm (0.06") 16 gauge stainless
steel, type 304, with 4B finish Interior work area formed from a single piece of
stainless steel with large
03pcs
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 378 -
radius corners to simplify
cleaning. 7. ULPA filters with efficiency
greater than 99.999 % for
superior operator and product protection
8. Standard Compliance : 1. Filter performance - IEST-RP-
CC034.1, IEST-RP-CC007.1, IEST-
RP 2. Electrical Safety - IEC 61010-1 /
EN 61010-1 / UL 3101-1 / hsirig, CSA C22.2 No. 1010.1-92
3. ISO Class 3 air cleanliness in work
zone.
9. Negative pressure plenum should surround
contaminated positive pressure plenum for quiet, uniform airflow
10.Microprocessor Control with temperature compensated
airflow sensor for supervising all cabinet functions.
11.Antimicrobial coating on all
painted surfaces to protect against surface contamination.
12. Advanced separatorless mini-pleated
ULPA filters tested to > 99.999% efficiency for 0.1 - 0.3 micron
particulates.
13.Digital read-out with alpha-numeric display should indicate all input, status and alarm functions.
14.The cabinet work zone should not
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 379 -
have welded joints to collect
contaminants or rust.
15.Blower should be Electronically Commutated Motor (ECM)
16.A recessed central area and stainless
steel drain pan channels for preventing liquids from entering the lower filtration and blower systems
17.Angled viewing window and narrow
profile front grille to improve reach into the work area
18.Front armrest raised above the work
zone to improve comfort and to ensure no airflow blockage
19.Frameless, shatterproof sash for
easier cleaning, and for larger, unobstructed viewing area
20.The Biological Safety Cabinet Should be individually tested, documented by
serial number and validated with the following test methods.
21.Inflow / downflow velocity PAO Aerosol challenge for filter integrity Light, noise and vibration Airflow pattern
visualization Electrical safety to IEC61010-1
22.Electrical 220-240V, AC, 23.To be provided with additional
accessories- a. UV Lamp b. Ergonomic height adjustable
chair.
27 Vortex
Mixer
Vortex Mixer 1. 1200 rpm
2. 220/230 V AC
03pcs
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 380 -
3. Size 12” × 12”
28 Water
Bath
Water Bath 1. Double walled made of stainless
steel.
2. Outer wall powder coated 3. Space between double walls is
filled with glass wool for insulation 4. Provided with drain plug for easy
emptying
5. Reliable immersion heating elements
6. Thermostat controlled temperature from ambient to 100 degree Celsius +/- 0.5
7. Digital Display of temperature with appropriate regulators, on
/off switch, alarm 8. Suitable to operate on 220 V AC
supply
9. To be provided with accessories 1. Stirrer with
S/S rods and blades
2. Test tube
racks of S/S
03 pcs
29 Single channel micropipette
Single channel micropipette 1. Single channel variable volume
0.1µl-2/2.5/5 µl 2. Systematic error should not be
more than 3% at minimum volume
and 1% at maximum volume 3. Minimum resolution of volume
0.001µl 4. Easy digital volume setting 5. Enhanced UV resistance
05 pcs
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 381 -
6. Precise reproducibility for long
hours 7. Tip ejection automatic 8. User technical manual to be
supplied in English 9. Certificate of calibration and
inspection should be provided 10. Spare parts and accessories to be
provided with pipettes.
11. Should provide compatible stands
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 382 -
SL. NO. NAME OF
EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
REQUIREMENTS /QTY(FOR ESI-PGIMSR, JOKA)
Unit Cost (to be filled
in by tenderers)
Total Amount (in figure)
Buy back rate(in figures)
Final amount after reducing buy back rate
Department of Pathology(For ESIC HOSPITAL, JOKA & Manicktala)
1 FULLY AUTOMATED SLIDE PREPARATION SYSTEM
FULLY AUTOMATED SLIDE PREPARATION SYSTEM
1. The system must be walk
away fully Automated Slide Preparation system to process slides for Immuno Histo Chemistry, In Situ Hybridization, Silver In Situ Hybridization ,Immuno Fluroscence and should be able to process IHC with IVD approved p16 antibody for the stage detection of cervical cancer.
2. There should be options for varying temperature and incubation time.
3. The system must be fully automated to do baking, deparaffinization, antigen retrieval and staining within the same system .
4. The System should be open for Primary antibodies.
01 pc For ESIC HOSPITAL, JOKA
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 383 -
5. The system should be able to generate fully prepared 60 IHC Slides in a 9-10 hour shift.
6. The system must have individual Slide heaters for all the slide positions,slide temperature should be individually controlled.
7. The system should have a
mechanism which will be able to control evaporation and protect tissue integrity on each slides.
8. The reagents and the antibody should get mixed through air whirlpool and no mechanical part should be involved for mixing the reagents and antibodies.
9. Only 100 micro litre of Primary antibody must be required for all types of slides irrespective of the size of the tissue section.
10. There should be free supply of reagents, buffer s and DAB for the first 200 Slides.
11. The system should be able to recognize Slide Specific
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 384 -
Barcode label which would provide automatic programming, patient and case identification.
12. The system should be US FDA certified.
13. Online UPS must be
provided with minimum one hour back.
14.The system should have compatible computer and software of latest technology available during installation. The software should be upgradable.
2 Fully
Automated Urine
Analyzer
Fully Automated Urine Analyzer
1. Random access system for
physical, chemical and
sediment analysis on urine
specimens.
2. Multiparameter Chemistry
analysis of at least 10
parameters including:
a. Specific gravity
b. pH
c. Albumin
01 pc For ESIC HOSPITAL, JOKA
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 385 -
d. Glucose
e. Ketone Bodies
f. Bilirubin
g. Urobilinogen
h. Blood/Hemoglobin
i. Micro albumin
j. Nitrite
3. Analysis of standard urinary
sediments consisting of
different cells, casts and
crystals.
4. Throughput-60/hour including
sediment analysis in random
access mode.
5. Microprocessor based
photometric analysis of
chemical parameters and flat
flow cell technology with high
speed and 800-1000 frame
imaging for sediment analysis.
6. Interconnected parallel pc with
appropriate soft ware for –
Retrival of analysis data
Display of analysis data
Image display of formed
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 386 -
elements
Storage of data of results
and others atleast
10,000 in number
7. Bar coded facility for reagent
and sample identification
8. Laser colored printing of results
and data
9. Power back up with UPS for at
least 2 hours
10. Accessories
a. Sample rack to hold 50
samples-05
b. Reagents for start up- 1000
analysis
c. International certification for
medical equipments
3 Bone decalcifier
automated,
electrolytic
decalfication
system
Bone decalcifier automated, electrolytic decalfication system, holding capacity for 30 cassettes and at least 700ml decalcifying solution, digitally controlled.
01 pc For ESIC HOSPITAL, JOKA
4 LBC Specifications for LBC
1. Automated system for processing of
01 pc For ESIC HOSPITAL, JOKA
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 387 -
Gynaecological and non- gynaecological cytology samples for liquid based cytology along with automated stainer.
2. Should have ability to make single slides which is uniform and reproducible.
3. Should have a controlled membrane transfer technology to make a thin smear with uniform distribution of cells.
4. System should allow residual material to be used for ancillary testing such as HPV, CT/NG, Immunocytochemistry, Special Stains, cell blocks etc.
5. Should have an automated slide stainer with an ability to run at least 30 slides in half an hour.
6. UPS with two hour power backup.
7. CE certificate Accessories:
1. Microscopic slides- 2 boxes of 100 slides
2. Filter- 2 box to process 200 samples
3. Solution -2 box to process 200 samples
4. Preservative solution -2 box
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 388 -
to process 200 samples 5. Staining kit for staining at
least 200 smears 6. All the standard accessories
to be provided with the equipment.
5 Patient and
data
managemen
t system
Patient and data management system for laboratory services
1. Fast processing system with
high end security having
several different modules for
patient and data management
of the laboratories.
2. Should have the ability to
generate unique identification
number of the patient starting
from lab registration, sample
collection, testing and report
delivery with generation of bar
code id, and stickers.
3. An integrated token system for
the patients while waiting for
sample collection.
4. Computer with bar code reader
in registration, sample
collection, different labs (
clinical pathology,
Cytopathology, hematology,
histopathology, different
01 pc For ESIC HOSPITAL, JOKA
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 389 -
sections of biochemistry and
microbiology)
5. Easy to operate
6. Ability to store data of at least
5000 patients per day.
7. Data to be accessible on
mobile, laptop, tablets etc and
the ability to deliver SMS to
target people(patients as well
as doctors).
8. Result modification before final
report delivery.
9. Can be integrated with other
automated lab equipments.
10. New features can be upgraded
time to time as per
requirements
11. Accessories for the system to
be supplied along with the
software.
6 Automated Cover Slipper
Automated Cover Slipper
1. Fully automated unit
with a through put of
400 slides/hr. at least
2. Should be compatible
with different sizes and
01 pc For ESIC HOSPITAL, JOKA
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 390 -
thickness of cover slip
as written below.
i. Size – 40mm, 50mm,
55mm, 60mm.
ii. Thickness – 0.13 –
0.17mm.
3. Should be compatible
with different solvent
like xylene, d-limonene
and aliphatic
hydrocarban –based
substitute and
mounting medium like
DPX etc.
4. Should be able to
handle both histology
and cytology sample
simultaneously.
5. Should have an in-built
filter to remove any
vapors or fumes.
6. Easy to operate with
different program
setting and a touch
screen panel.
7. Should be able to
accept slides from
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 391 -
different automated
slide stains.
8. UPS for 1hours back
up.
9. International CE
certification for medical
equipment.
Accessories – 1. Cover slips of different
sizes & thickness – 500
each.
2. Dust cover.
3. Standard accessories
with the main
equipment.
7 Human morbid tissue
materials
Specification for human morbid tissue materials
For ESIC HOSPITAL, JOKA
Cardio-Vascular
Mitral stenosis Atheroma aorta Lt. ventricular hypertrophy Fibrinous pericarditis Dilated Cardiomyopathy Infective endocarditis
2 each
Respiratory Lobar pneumonia 2 each
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 392 -
Bronchiectasis Emphysema Pulmonary Tuberculosis fibrocaseous & miliary Bronchogenic carcinoma Silicosis Bysinosis
Gastro-Intestinal
Peptic ulcer Typhoid ulcer of S.I.
2 each
Renal Granular contracted kidney Large white kidney Hydronephrosis Renal cell carcinoma Renal stone
2 each
Vascular Syphilitic Aortits 2 each
Bone Osteomyelitis-sequestrum TB spine Osteogenic sarcoma Giant cell tumor
2 each
Female Genital Fibroid uterus Carcinoma cervix
2 each
Hepato-Biliary Micro-nodular cirrhosis Fatty liver Metastatic liver HCC
2 each
Female Breast Carcinoma breast 2 each
Male Genital Carcinoma Penis Seminoma of testis Benign hyperplasia of Prostate
2 each
Lymph Node TB Lymph Node Hodgkins LN 2 each
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 393 -
8 GROSSING TABLE WITH BIOSAFETY HOOD
1. Should be of High-quality stainless steel construction with Formalin container and height adjustment via electro hydraulic mechanism.
2. Vacuum breaker-protected water supply
3. Ventilation system with Two options(outside source or inbuilt)
4. Large sink with mixing faucet
5. Ample lighting 6. Magnetic instrument
holder 7. Washable dissecting
board 8. Must have Service
centre in Kolkata
9. Accessories to be provided with Grossing Station:
Grossing board to
accommodate a wide range of tissue types. Should have two adjustable wells to ensure grossing to an exact thickness
Integrated rulers on the
standard and large boards to
01 pc (for ESI Hospital , Manicktala)
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 394 -
enable gross measurement of specimens.
Trimming knives and scalpel blades to provide the sharp cuts necessary for exact grossing techniques.
Tissue tampers for allowing a firm hold on specimens while making horizontal cuts.
2-4 grossing forks designed to hold specimens including fragile tissue and any specimens with layers, while maintaining perfect specimen form and integrity.
Dust cover Dictating unit with microphone UPS 1.0 KVA Integrated imaging system Infrared control.
9 GROSSING STATION
Item: : Histopathological Grossing table / Grossing Station elevated floor model with Electrical and mechanical controls with UPS 1.0 KVA . Details: 1. Cutting board with black viewing surface, to accommodate a wide range of tissue types. Should have two adjustable wells to ensure grossing to an exact thickness. 2. Connecting tubes for water
supply and drainage.
01 pc (for ESI Hospital , Joka)
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 395 -
3. Sprinkler system for easy
cleaning of the working area.
4. Specimen safe drain system.
5. Fine grating S.S. sink.
6. Electronic scale upto 2000g at
least.
7. Integrated S.S. rulers in cm / mm scale on the standard and large boards. 8. Light tubes and adjustable spot
lights.
9. Filtration system to suck-off polluted air, with easily Replaceable filter, alum oxide. 10. Magnifying Glass with long
handle (flexible).
11. Separate metal table for
grossing with drawers.
12. Formalin Container.
13. Dictating Unit with microphone and controlling unit & foot switch Essential Accessories must be
supplied with the main
consignment
Trimming knives and scalpel blades to provide the sharp cuts necessary for exact
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 396 -
grossing techniques. Tissue tampers for allowing a
firm hold on specimens while making horizontal cuts.
2-4 grossing forks designed to hold specimens including fragile tissue and any specimens with layers, while maintaining perfect specimen form and integrity.
Protective Dust Cover UPS 1.0 KVA Capacity
10 LABORATORY MICROWAVE PROCESSOR SYSTEM FOR ENZYME RETRIEVAL
Nomenclature: Laboratory Microwave Processor System for Enzyme Retrieval Table- top Model 20 to 30 Litre capacity. Description: Table-top model, capacity 20-30 Litre, convection mode, S.S. body, preferably ceramic enamel inner wall, programmable digital temperature controller and display within a range of 40°C to 108°C, built-in temperature probe, automatically controlled programmable timer setting and digital display, wattage level 800 - 1000 watt : MW leakage proof design, overheating prevented design, audible alarm with user adjustable time delays,
01 pc (for ESI Hospital , Joka)
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 397 -
throughput of 80 – 100 slides per run, dewaxing, rehydration and antigen retrieval in approximately 30 minutes,IEC/CE/ISO Certified model. Essential Accessories :
5. Compatible Plastic Rack for holding slides: 5 (five) numbers
6. MW compatible specimen containers assorted sizes: 5 (five) numbers
7. U.P.S. 1 KVA: 1 (one)Number
8. Operator’s Guide
11 pH METER DIGITAL
Nomenclature : pH Meter digital pen type. ( Minor variation of quoted specification may be accepted within a short range as available in the market nearest to the requirement of the consignor) Principle:
05 pcs (04 pcs for ESI Hospital , Joka & 01 pcs for ESI Hospital Manicktala)
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 398 -
Microprocessor controlled pen type equipment.
pH range: 0 – 14 pH Units.
mV range: 0 to ± 1999 mV.
Resolution: 0.01 pH; 1 mV. Accuracy: ±0.01 pH ± 1 digit; ± mV ± 1 digit Operating temperature: 10˚C to 50˚C. Operating Panel & Display: Panel for different functions with digital LED Display.
12 AUTOMA
TIC PRECISIO
N MICROBA
LANCE
Nomenclature: Electronic precision weighing balance 150g (approx) with display and UPS. (Variation of capacity may be accepted within a short range available in the market nearest to the requirement of the consignor) Description : Electronic precision microbalance with chemical and moisture proof stainless steel top-
02 pcs (01 pc for ESI Hospital , Joka & 01 pc for ESI Hospital Manicktala)
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 399 -
fitted weighing surface; LCD display panel and control panel; interfaced peripheral printer with key-panel; functional for piece counting, % weighing and dynamic weighing; provision of display of weight in mg / gm must be there; easy calibration, cleaning and maintenance; to be supplied with full documentation of precision & accuracy certificate. Power cord Indian type. Capacity: Maximum capacity : Approx. 150 g Readability : 0.01 g Repeatability : 0.01 g Linearity : ± 0.02 g ( at ambient temperature) Essential Accessories must be supplied with the main consignment & committed in the bid 1. Calibration weight. 2. Protective cover.
13 Hot plates with digital temperature controller, temperature range upto 300°C, heat-
2 pcs (For
ESI-PGIMSR,
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 400 -
electric proof powder coated cast iron top, spiral heaters, thermostatic heat control
JOKA)
14 Electric Vacuum Embedding Bath
______________________
1 pc (For
ESI-PGIMSR,
JOKA)
15 Distilled Water Still
(Deionizer), removal of inorganic and organic ions, dissolved particles, microorganisms, etc., with vacuum system, analytical grade water purification & electro-deionization system, multi-stage (prefiltration, particle clearing, reverse osmosis, electro-deionization and ultra-violet purification) with display and self performance check, connectivity to data management system/ PC with printer for traceability of water quality
1 pc (For
ESI-PGIMSR,
JOKA)
16 Band Saw all S.S. 8 cm with rounded ends electric
Maximum job height 200mm, maximum throat 200mm, approx table dimension 600x600mm, blade size approx 3500x30x1.0 mm(thickness), blade speed 20 to 100 m per min, with saw and coolant motor
2 pc (For
ESI-PGIMSR,
JOKA)
17 Staining Racks
S.S. horizontal with handle cradle type for 10 slides/ 20 slides
20 pc (For
ESI-PGIMSR,
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 401 -
JOKA)
18 Precision Chemical Balance
Precision Chemical Balance with assorted precision brass weights 1mg to 200g,
2 pc, (For
ESI-PGIMSR,
JOKA)
19 Laboratory
Counter Laboratory Counter Clay-Adams 9 keys spring loaded, including eight individual counting keys and one totalizer heavy duty metallic body, good visibility of rotating digits, digit range 0 to 100 for each, audible alarm at 100 count in total,. Options for counting of cell, simple computation and percentage counting. Individual key counting limit of 999 cells. Bilateral sturdy resetting knobs.
6 pcs (For
ESI-PGIMSR,
JOKA)
20 Automatic Timer Clock Digital
Automatic Timer Clock Digital with Split and Lap timer, range upto 3 hours
6 pc(For ESI-
PGIMSR,
JOKA)
21 Bone Saw 8 inches blade rounded point
Bone Saw 8 inches blade rounded point, high carbon steel blade to withstand 70°C temperature of friction, sharp cutting edges of teeth, ergonomic handle design
2 pc (For
ESI-PGIMSR,
JOKA)
22 Drill for boring glass ______________
2 pcs (For
ESI-PGIMSR,
JOKA)
23 Blow piece with bellow for bending
_____________ 2 pcs(For
ESI-PGIMSR,
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 402 -
glass JOKA)
24 Sternal
Puncture
Needle
Sternal Puncture Needle (Klima and Salah type)Heavy duty stainless steel made, with total assembly comprising of aspiration needle with adjustable guard and trocar, Size:15G, 1 7/8inches Adult size
6 each (For
ESI-PGIMSR,
JOKA)
25 Sternal
Puncture
Needle
Sternal Puncture Needle(Klima and Salah type) Heavy duty stainless steel made, with total assembly comprising of aspiration needle with adjustable guard and trocar, Size: 18G, 1 ½ inches Child size
6 each (For
ESI-PGIMSR,
JOKA)
26 Liver Biopsy Needle Trucut needle s.s.
_____________
6 pcs (For
ESI-PGIMSR,
JOKA)
27 Box weight analytical ______________
1pc (For ESI-
PGIMSR,
JOKA)
28 Stop watch digital with LED/LCD display reading at 1/5 display
_____________
6 pc (For
ESI-PGIMSR,
JOKA)
29 Ultra-violet lamp table top model
_____________ 1 pc (For
ESI-PGIMSR,
JOKA)
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 403 -
30 Surgical Instruments assorted
Surgical Instruments assorted
Autopsy knife blade 100mm with handle
Autopsy knife blade 170mm with handle
Autopsy knife blade 325mm with handle
Dissecting scalpel blade curved tip with handle
Dissecting scalpel blade pointed tip with handle
Forceps Artery 7.5 inch
Forceps Cartilage Curved 5 inches
Forceps Cartilage Straight 5 inches
Forceps dissecting plain serrated jaws broad tip 5.5.inches
Forceps dissecting plain serrated jaws broad tip 7.5.inches
Forceps dissecting plain serrated jaws Fine tip 5.5.inches
Forceps Iris
Forceps Sinus
Forceps Specimen
2 sets (For
ESI-PGIMSR,
JOKA)
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 404 -
Forceps Tissue 5 inches
Forceps Tissue 8 inches
Knife Professional 250x20mm
Knife Senior 225x25mm
Mallet S.S.
Needle Teasing S.S.
Probe Curved end S.S.
Probe Straight S.S.
Scissors Angle Fine Pointed Dissecting 4.5 inches
Scissors Fine Pointed Curved 5.5 inches
Scissors Fine Pointed Straight 4.5 inches
Scissors Mayo Dissecting Curved 5.5 inches
Scissors Mayo Dissecting Straight 5.5 inches
Scissors Mayo Dissecting Straight 9 inches
Scissors Surgical Curved blunt/sharp point5.5 inches
Scissors Surgical Straight
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 405 -
blunt/blunt
Scissors Surgical Straight sharp/sharp
Speculum Nasal
Sponge Holder
Surgical blade holder 6 inches
Trimming knife blade 130mm with handle
Trimming knife blade 260mm with handle
31 Dark Room Lamp
__________________ 1pc (For ESI-
PGIMSR,
JOKA)
32 Deep Pan S.S.
__________________ 5 pc (For
ESI-PGIMSR,
JOKA)
33 Paraffin Pouring Pitcher with long spout and heat resistant handle S.S.
__________________ 2 pcs (For
ESI-PGIMSR,
JOKA)
34 Sampling __________________ 5 pcs (For
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 406 -
scoop S.S. ESI-PGIMSR,
JOKA)
35 Sampling spatula S.S. 6 inches
__________________ 5 pcs (For
ESI-PGIMSR,
JOKA)
36 Sampling spatula S.S. 10 inches
__________________ 2 pcs(For
ESI-PGIMSR,
JOKA)
37 Funnel S.S. dia 10mm/4 inches
__________________ 2 pcs (For
ESI-PGIMSR,
JOKA)
38 Funnel S.S. dia 15mm/6 inches
__________________ 1 pc (For
ESI-PGIMSR,
JOKA)
39 Microtome Knife Carbon steel Profile C 120 mm
1 pc (For
ESI-PGIMSR,
JOKA)
40 Microtome Knife Holder with handle
5 pcs (For
ESI-PGIMSR,
JOKA)
41 Belgian Hone Best quality
1 pc (For
ESI-PGIMSR,
JOKA)
42 Leather Strop superfine quality
1 pc (For
ESI-PGIMSR,
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 407 -
double sided JOKA)
43 Knife Sharpener automatic
1pc (For ESI-
PGIMSR,
JOKA)
44 Post-mortem set
Autopsy knife blade 100mm with handle
Autopsy knife blade 170mm with handle
Autopsy knife blade 325mm with handle
Calipers
Curettes
Cuscoe’s speculum
Dilators
Enterotomes and
2 sets (For
ESI-PGIMSR,
JOKA)
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 408 -
viscerotomes
Forceps Artery 7.5 inch
Forceps Cartilage Curved 5 inches
Forceps Cartilage Straight 5 inches
Forceps dissecting plain serrated jaws broad tip 5.5.inches
Forceps dissecting plain serrated jaws broad tip 7.5.inches
Forceps dissecting plain serrated jaws Fine tip 5.5.inches
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 409 -
Forceps Iris
Forceps Sinus
Forceps Specimen
Irrigation device
Kidney tray 8 inches
Knife Brain
Knife Cartilage
Knife Professional
Knife Resection
Metallic ruler tape flexible
Nasal speculum
Needle holders
Retractors
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 410 -
Rib shears
Scalpels assorted sizes
Scissors Angle Fine Pointed Dissecting 4.5 inches
Scissors Dissecting
Scissors Fine Pointed Curved 5.5 inches
Scissors Fine Pointed Straight 4.5 inches
Scissors Iris
Scissors Mayo Dissecting Curved 5.5 inches
Scissors Mayo Dissecting
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 411 -
Straight 5.5 inches
Scissors Mayo Dissecting Straight 9 inches
Scissors Metzenbaum
Scissors Surgical Curved blunt/sharp point5.5 inches
Scissors Surgical Straight blunt/blunt
Scissors Surgical Straight sharp/sharp
Sternal Saw
Stryker Skull Saw
Surgical
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 412 -
staplerwith reloadable staple cartridges
Tenaculum
Towel forceps
Tray 12 x 12 inches
Tray 12 x 18 inches
Trocars
45 Bone marrow Biopsy Needle Jamshidi Type Heavy duty stainless steel made two piece, with light weight T-Handle streamlined and ergonomic design, trocar with tapered stylet point and triple crowned
__________________ 2 pcs(For
ESI-PGIMSR,
JOKA)
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 413 -
cannula tip.Adult type, 11G, Stainless steel instrument tray with lid 8 inches x 8 inches
46 Bone marrow Biopsy Needle Jamshidi Type Heavy duty stainless steel made two piece, with light weight T-Handle streamlined and ergonomic design, trocar with tapered stylet point and triple crowned cannula tip.Pediatric type, 13G, Stainless steel instrument tray with lid 8 inches x 8 inches
__________________ 2 pcs (For
ESI-PGIMSR,
JOKA)
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 414 -
47 Test tube rack HDPE 30positions
__________________ 5 pcs(For ESI-PGIMSR, JOKA)
48 Bone decalcifier electric
__________________ 1 pc (For ESI-PGIMSR, JOKA)
49 Class II
Biosafety
Laminar
Power supply: 440 V,AC, 3 Phase Material of Construction: SS 304 Motor : Supply: 0.5 HP: 1440 RPM: 1-0, 230 V AC: 50 Hz Exhaust: 2 HP 2800 RPM Blower (Impeller) : Supply: 210 x 117 Wmm Exhaust : ---- Dimensions: (W x D X H): 1060 x 1040 x 2150(Approximate) Bioclean work space: 877 x 660 x 610 Filters (W x D X H): Pre filter: size : 305 x 380 x 45 Fresh Air Filter: Type: EU-6 Intermediate: Size: 915 x 610 x 45 Type: EU-13 Final Filter: Size: 915 x 610 x 75 (ANTIMICROBIAL) Type: EU-13 Intermediate: Size: 915 x 610 x 100 (ANTIMICROBIAL) Type: EU-13 Exhaust filter: Size: 915 x 457 x 100 Type: EU-13
1 pc (for
ESI
PGIMSR
Manicktal
a)
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 415 -
Differential pressure gauge : Magnehelic pressure gauge Across HEPA filter wrt. ambient: 0-25 mm Across work space wrt. ambient: 0-10 mm Illumination: UV light: 1.5' L & 30W FLU light: 1.5' L & 20W Special features: Virus burnout system
50 Homogenizer
with two
probes
Homogenizer with two probes
Small dispersing instrument for volumes from 0.1-100 ml Quick-connect coupling for probes Stainless steel probes Option of using with plastic disposable dispersing elements • High performance drive Probe for volume Range (H20): 0.1 to 10 mL, 1-100 ml Speed Range: 8000 to 30,000rpm Maximum Viscosity (cps): 20000 Preferably built-speed control Use Options: Handheld or stand-mounted Motor: 125w Noise Level: 65dB or less Overload Protection: Yes Should be supplied with all the accessories like Stand, boss clamp, clamp etc
1 pc (for
ESI
PGIMSR
Manicktal
a)
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 416 -
CLINICAL LABORATORY (For ESI-PGIMSR, JOKA
51 Sedimentation apparatus Westergren with
Sedimentation apparatus Westergren with
1. metallic rack with spring-loaded pipette holder and round base with rubber cushion, provided with spirit level 5 station
2. Glass Westergren pipettes, class A glass with precision etched and printed marks and ground lower end and smooth rounded top end : 5 (Five) tubes
3. Pipette filler for Westergren tube : 1 (One) No.
12 sets(For
ESI-PGIMSR,
JOKA)
52 Sedimentation apparatus Wintrobe
Sedimentation apparatus Wintrobe with
1. metallic rack with screw adjusted pipette holder and round base with rubber cushion 5 station
2. Glass Wintrobe’s tubes, class A glass with precision etched and printed marks in mm in both ascending and descending order, polished and rounded opening : 5 (Five) tubes
3. Glass Landau’s tubes, class A glass with bulb and precision etched and printed marks at 0 to 50 mm : 5
5 sets(For
ESI-PGIMSR,
JOKA)
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 417 -
(Five) tubes 4. Filling pipette with long stem
and rubber teat : 5(Five) No.s 53 Urinometer
precision glass with mercury bulb and graduated stem with temperature mark
___________________ 20(For ESI-
PGIMSR,
JOKA)
54 Albuminometer Esbach’s Corning glass with precision marking with corrosion-resistant rubber stopper in wooden/polymer case
_________________ 20(For ESI-
PGIMSR,
JOKA)
55 Crucible with pestle chinaware tough quality
_________________ 2(For ESI-
PGIMSR,
JOKA)
56 Crucible Gooch with
_________________ 2(For ESI-
PGIMSR,
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 418 -
adaptor JOKA)
57 Balance sensitive electronic precision weighing balance 2000g (approx) with display and UPS.
Electronic precision balance with chemical and moisture proof stainless steel top-fitted weighing surface; LCD display panel and control panel; interfaced peripheral printer with key-panel; functional for piece counting, % weighing and dynamic weighing;
_________________ 2(For ESI-
PGIMSR,
JOKA)
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 419 -
provision of display of weight in mg / gm must be there; easy calibration, cleaning and maintenance; to be supplied with full documentation of precision & accuracy certificate. Maximum capacity: Approx. 12000g Readability : 0.1g Repeatability : 0.1g Linearity : ± 0.3g (at ambient temperature) Essential Accessories 1. UPS of capacity 0.5 KVA. 2. Power cord Indian type.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 420 -
3. Extension cable 5m. 4. Calibration weight. 5. Protective cover.
58 Balance chemical with fractional weights.
Balance chemical with fractional weights.
Conventional chemical balance , corrosion and rust prevented metallic body resistant to expansion on heat; corrosion prevented balance pivot wedges; rust and corrosive-chemical resistant stainless steel double weighing pans; zeroing mechanism; side opening glass cabinet with base screws.
Weight box holding calibrated brass fractional weights resistant to rust and sulfation; provided with forceps.
Weight range 1 mg to 200 g.
2(For ESI-
PGIMSR,
JOKA)
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 421 -
59 Test tube rack HDPE 10 positions
60(For ESI-
PGIMSR,
JOKA)
60 Spectrophotometer
Spectrophotometer
Analysis Option: a. Absorbance
b. 1 point end linear & non linear.
c. 2 point end linear & non linear.
d. Rate linear & non linear.
e. Immunoturbidimetry.
Light Sources: Pre aligned Quartz halogen lamp.
Wave Length: Automatically Selectable narrow band interference quartz filter within wavelength of 340 -700 nm -- fixed seven or eight filters and two optional filters as per users choice.
Measurement Time : Selectable.
1(For ESI-
PGIMSR,
JOKA)
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 422 -
Cuvette a. Flow cell Cuvette.
b. External rectangular Cuvette.
Cuvette Temperature: Peltier control & programmable at 25˚C, 30˚C and 37˚C.
Aspiration System: Motor driven pump.
Aspiration Volume Programmable.
Cuvette Blanking: Automatic.
Programmable Parameter: About 100 user defined test programs including routine biochemical parameters, enzymes, immunological markers, truly open system,
selection through key- board.
Calibration: Automatic against standard / calibration.
Quality control: a. 2 levels of control (at least)
b.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 423 -
Levey - Jennings diagram.
c. Manual entry of QC
Memory Storage: a. Minimum 200 patients result.
b. Calibration result.
c. Quality control result for 01 month.
Display:
a. Graphic LCD.
b. Display of reaction curve, absorbance, temperature.
c. Display of result of real time.
d. Graphical display of reaction time.
e. Calibration curve graphical display.
Key board:
a. Chemical and moisture prevented single touch alphanumeric membrane
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 424 -
key panel.
Printer:
a. Built in thermal printer with full graphic facility.
b. Parallel full page ink printer with formatting options.
Reporting format: a. Conventional
b.SI unit(Optional/Interconvertible).
Recalculation : Recalculation of result following modification of calibration, measurement timings and wavelength.
Automatic Flagging: a. Absorbance and linearity cheek.
b. Reagent stability.
c. Substrate depletion.
Peripheral interfacing: a. Parallel ports for external
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 425 -
printer , key- board and PC. Software PC Compatible.
Power Cord Indian Type 3-pin power cord locally available and replaceable .
Dust Cover Washable dust-covers for main unit and key-board, etc.
Working Manual Working Manual in original
61 Lumbar puncture needle s.s.
____________________ 12(For ESI-
PGIMSR,
JOKA)
62 VOLUME DISPENSER
Nomenclature:Volume Dispenser Automatic. Type : Inert amber colored glass bottle reservoir with bottle top Ball-valve polymer pump graduated for variable volume adjustments, autoclavable, corrosion resistant . Capacity: Reservoir capacity 1000 ml.
Bottle top dispenser pump capacity 0 – 5.0 ml. with increments of 0.1 ml
01 pc (For ESI-PGIMSR, JOKA)
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 426 -
SL. NO. NAME OF
EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
REQUIREMENTS /QTY(FOR ESI-PGIMSR, JOKA)
Unit Cost (to be filled
in by tenderers)
Total Amount (in figure)
Buy back rate(in figures)
Final amount after reducing buy back rate
Department of BLOOD BANK (For ESIC HOSPITAL, JOKA)
1 ULTRA LOW TEMPERATURE LAB DEEP FREEZER
ULTRA LOW TEMPERATURE LAB DEEP FREEZER Nomenclature : Laboratory deep freezer floor model electrically operated, capacity of approx 550 L- 600 L ( Variation of capacity may be accepted within a short range available in the market nearest to the requirement of the consignor) Principle: Electrically operated vertical floor model with ultra cooling device, stainless steel interior, 4-5 replaceable storage compartment with stainless steel racks, temperature selector and Temperature Controller, eye- level display and temperature recorder, gasket sealing system to avoid ice formation, calibration mode should be built-in with the system and lock system in door. Temp. range: Selectable range from -400 C to - 80˚C.
Operating Panel & Display: Button/ switch panel for different functions and programmes,viz, start, stop, temperature control, temperature and time setting with LED Display. Battery backup for alarm & display. Display of set and actual running
01 pc
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 427 -
values. Alarm: Acoustic Signal for over or under-temperature, improper locking of door(optional), or error. Essential Accessories must be supplied with the main consignment & committed in the bid 1. Thermometer. 2. UPS 2.0 KVA. 3. Power cord Indian type. 4. Storage boxes.
2 Automated
Immunohematolo
gy detection
system
Specification Automated Immunohematology
detection system by Gel Card Technology.
1. Semi-automated immunohematology analyzer incorporated with centrifugation, reading and interpretation abilities for the tests performs by the column agglutination technology for transfusion related cross matching on anti human globulin and enzyme phase (to detect both IgG & IgM antibodies), blood grouping, partial Rh-D typing, antibody screening &identification in a single step.
2. The following range of investigations must be provided in the system.
(i) ABO Blood grouping with partial D
01 pc
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 428 -
screening.
(ii) Weak anti D test with ICT method.
(iii) Antibody screening and identification.
(iv) Single antigen test cards and antisera for Rh-C/c, E/e, Cw, Kell, Fya, Fyb, Jka, Jkb, Lewisa Lewisb, Lutherana, Lutheranb, MNS, etc.
(v) Special gel cards for antihuman globulin test positive IgG, IgM, IgA, C3d, C3c etc.
(vi) Provision for acid elution method.
(vii) Special blood grouping cards for donor and recipient for DVI variant.
(viii) Syphilis antibody detection.
Detail procedure for all compatible methodologies mention as above must be provided. 3. Automated card reading and report
generation with bar code security.
4. Expression of results in grades of agglutination.
5. Capacity for 20 – 24 gel cards with ‘V’ bottom tubes in single run.
6. Peltier heating of incubator with programmable controls for 15 minutes and digital display of temperature.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 429 -
7. Centrifugation force with 80 – 84G.
8. Clear transparent top for centrifuge and incubator with rust and corrosion resistant body.
9. The system must be devoid of any wash phase.
10. Incorporated capabilities for validation storage and reproduction of results.
11. Parallel computer connection with bidirectional portability and appropriate software to be provided along with the equipment.
12. Compatible printer for printing of different data and customized report to be provided along with the equipment.
13. A quality control system must be incorporated in the equipment for all the lab.
14.
(i) Provision for 2 and 3 red cell panel for antibody screening, 11 cell panel for antibody identification and pooled ‘O’ cell with known phenotype for donor screening as per NACO Guidelines.
(ii) Provision for NaCl/Enzyme and cold agglutinins cards, modified bromelin solution, papain, cell stab, cell thaw and cell freeze reagent.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 430 -
15. CE/ISI compliance of the system.
SL. NO. NAME OF
EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
REQUIREMENTS /QTY(FOR ESI-PGIMSR, JOKA)
Unit Cost (to be filled
in by tenderers)
Total Amount (in figure)
Buy back rate(in figures)
Final amount after reducing buy back rate
DEPARTMENT. OF SURGERY ESI-PGIMSR, JOKA 1 OPERATING
HAND
INSTRUME
NTS
OPERATING HAND INSTRUMENTS Set for LAPROSCOPIC SURGERY
01 set
1 Trocar /Cannula Size 11 mm
3
Trocar with pyramidal tip ,multi function automatic valve,
stopcock for insufflation
2 Trocar/Cannula Size 5.5mm
3
Trocar with pyramidal tip ,multi function automatic valve,
stopcock for insufflation
3 Maryland Dissecting forceps, 5mm, working length 33cm
1
Rotating, Dismantable with channel for cleaning & connector
pin for unipolar coagulation. Insulated Metal Handle without
ratchet & Milled Radel shaft insulation. Easy to change insert.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 431 -
4 Curved Kelly Dissecting forceps, 5mm, working length 33cm
1
Rotating, Dismantable with channel for cleaning & connector
pin for unipolar coagulation. Insulated Metal Handle without
ratchet & Milled Radel shaft insulation. Easy to change insert.
5 Right Angle Dissecting forceps, 5mm, working length 33cm
1
Rotating, Dismantable with channel for cleaning & connector
pin for unipolar coagulation. Insulated Metal Handle without
ratchet & Milled Radel shaft insulation. Easy to change insert.
6 Babcock Grasping forceps 5mm, working length 33cm
1
5mm, Rotating, Dismantable with channel for cleaning
Non insulated handle with ratcheting mechanism, easy to change insert
7 Alligator Light Grasping forceps,5mm, working length 33cm
1
5mm, Rotating, Dismantable with channel for cleaning & connector
pin for unipolar coagulation. Insulated Metal Handle with ratchet
& Milled Radel shaft insulation. Easy to change insert.
8 Fundus Grasper , 5mm, working length 33cm
2
5mm, Rotating, Dismantable with channel for cleaning
Metal Handle with ratchet & Milled Radel shaft insulation.
Easy to change insert.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 432 -
9 Tooth Grasper / Allis, 5mm, working length 33cm, with double row of teeth
1
Rotating, Dismantable with channel for cleaning
Metal Handle with ratchet & Milled Radel shaft insulation.
Easy to change insert.
10 Endo Grasper , 5mm, working length 33cm
1
5mm, Rotating, Dismantable with channel for cleaning
Metal Handle with ratchet and non-ratchet & Milled Radel shaft insulation.
Easy to change insert.
11 Double Action Claw , 5mm, working length 33cm
1
5mm, Rotating, Dismantable with channel for cleaning
Insulated Metal Handle with ratchet and non ratchet facility &
Milled Radel shaft insulation. Easy to change insert.
12 Metzenbaum Scissor, 5mm, working length 33cm
1
5mm, Rotating, Dismantable with channel for cleaning & connector
pin for unipolar coagulation. Insulated Metal Handle without ratchet
& Milled Radel shaft insulation. Easy to change insert.
13 Straight Metzenbaum Scissor, 5mm, working length 33cm
1
5mm, Rotating, Dismantable with channel for cleaning & connector
pin for unipolar coagulation. Insulated Metal Handle without ratchet
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 433 -
& Milled Radel shaft insulation. Easy to change insert.
14 Hook Scissor, 5mm, working length 33cm
1
5mm, Rotating, Dismantable with channel for cleaning & connector
pin for unipolar coagulation. Insulated Metal Handle without ratchet
& Milled Radel shaft insulation. Easy to change insert.
15 Dissecting Electrode (L shaped) , 5mm, working length 33cm
1
5mm instrument with proper insulation upto working tip
16 Dissecting Electrode (Spatula) , 5mm, working length 33cm
1
5mm instrument with proper insulation upto working tip
17 Clip Applicator 10 mm dia for Ethicon LT-300
1
10mm, Rotating, with channel for cleaning
Metal Handle without ratchet .
18 Suction / Irrigation cannulas. Trumpet valve.
1
5mm all metal & single hand control trumpet with perforations at
distal tip for smooth function.
19 Reducer 10 / 5 mm for reducing 10 mm to 5mm dia.
1
20 Aspiration Needle, 5mm
1
21 Gall Bladder Extractor
1
10mm, Rotating, Dismantable with channel for cleaning
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 434 -
Metal Handle without ratchet .
22 Monopolar Cable
1
23 5mm Bipolar Fenestrated Forceps with Ring Handle and cable
1
24 Reusuable bipolar cable
1
25 5mm Straight tip needle holder with metal handle and ratcheting
1
mechanism, can be dismantled, with channel for cleaning.
SL. NO. NAME OF EQUIPMENT &
INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
REQUIREMENTS /QTY(FOR ESI-PGIMSR, JOKA)
Unit Cost (to be filled
in by tenderers)
Total Amount (in
figure)
Buy back rate(in figures)
Final amount
after reducing buy
back rate
DEPT OF DERMATOLOGY ESI PGIMSR, JOKA KOLKATA
1 Radiofrequency machine
Radiofrequency machine Number of items: 2 Power required: 230v/50 hz Dimensions 260x300x150 Weight 7kg Electrodes insulated Frequency 0.20-2.93 Mhz Cut: 70%cut, 30% coagulation Coagulation : 60%coagulation, 40% cut Fulguration: available intensity control: Linear
02 pcs
2 Centrifuge machine
Centrifuge machine Number of items- 2 Capacity in ml: 24x5 Type of head: Angle
02 pcs
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 435 -
No. of tubes: 24 Maximum speed: 3500 rpm Maximum RCF: 1250 W×D×M (MM) : 210×210×250 Supply: 221-240v, 50Hz, single phase
3 Binocular microscope
Binocular microscope Optical system: UIS2 (UNIVERSAL INFINITY CORRECTED) CE certified Antifungal treated optical lens Illumination: built in transmitted Koeheler illuminator, 6v/30W halogen bulb 100-120V/220-240V ̴ 0.85/0.45A , 50/60 Hz Focussing: Stage height movement by roller guide (rock & pinion), stroke/rotation=36.8mm Full stroke range: 25mm Revolving nose piece: Fixed, quadruple nose piece with inward tilt Binocular observation: field no. 20, tube inclination:30 degree, interpupillary distance adjustment range: 48mm-75mm Stage: size-188mm x 134mm, movement range: 76mm (X direction) x 50mm (Ydirection) Specimen holder: double size holder Rubber grip: equipped as standard Condenser: type- Abbe condenser, NA: 1.25 with oil immersion, aperture in diaphragm: built in Dimensions & weight: 233mm (W) X 411mm (H) X 367.5 mm (D), 8KG
02 pcs
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 436 -
DEPT OF ENT ESI PGIMSR, JOKA KOLKATA
1 Surgical Operating Microscope
Specification of Surgical Operating Microscope Surgical operating microscope for micro ear surgery and micro laryngeal surgery with the following associated features;
1. Integrated HD monitor to display
surgical steps to students.
2. Integrated HD video recording
system with HD camera system.
3. Integrated HD still photography
enabling system with camera
attachment facility.
4. Data storage, transmission and
documentation facility with
appropriate software.
5. Stereo co-observation tube for
assistant surgeons and students.
6. Lens for ear and laryngeal surgery
(400, 200)
7. Lens covers and microscope covers
for sterility purposes
8. Microscope stand and wheels.
01 set
2 Rigid Oesophagoscope
Specification for Rigid Oesophagoscope set Adult: 1. 0 degree telescope diameter 5.5mm, length 53 cm, autoclavable with
01 set
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 437 -
set Adult incorporated fibre optic light transmission 2. Telescope guide for use with 50cm esophagoscope 3. fibre optic light carrier for use with 50cm esophagoscope 4.Rigid oval esophagoscope, outer diameter 12 X 16 mm, length 50 cm 5. Rigid oval esophagoscope, outer diameter 10X14 mm, length, 50 cm 6. Prismatic light deflector, autoclavable with fibre optic light cable connection 7. fibre optic light carrier for use with 30cm esophagoscope 8. Rigid oval esophagoscope, outer diameter 12.2X 16.2 mm, length 30 cm 9. Rigid oval esophagoscope, outer diameter 10.2 X14.2 mm, length 30 cm 10. Rigid oval esophagoscope, outer diameter 8.6X 12.1 mm, length 30 cm 11. Fibre optic light carrier for use with 20 cm hypopharyngoscope 12. Rigid Oval Hypopharyngoscope, outer diameter 10X14 mm. length 20 cm 13. handle for Esophagoscopes 14. Adjustable magnifier autoclavable(swivel action) 15. Cotton carrier(55cm) 16. Rigid suction tube with rubber tip, straight, working length 55cm 17.spring handle sponge holder, working length 55cm 18. Alligator forceps for hard foreign bodies, double action jaws, sheath diameter 2.5mm,working length 55cm 19. biopsy forceps and foreign bodies, working length 55cm 20. cupped forceps for biopsies, working length 55cm
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 438 -
21. Peanut removal forceps ,working length 55cm 22. Cotton applicator, working length 30cm 23. Straight suction tube with rubber tip, working length 35cm 24. Spring handle sponge holder, working length 35cm 25. Alligator forceps, sheath diameter 2mm,working length 35cm 26. Peanut forceps, working length 35cm 27. Cupped forceps for biopsy ,working length 35cm 28. Universal forceps for biopsy and foreign bodies ,working length 35cm
3 Rigid oesophagoscopy set , Paediatric
Specification for rigid oesophagoscopy set , Paediatric 1, Oesophagoscope tube, size 6,length 30 cm 2. Oesophagoscope tube, size 5, length 30 cm 3. Oesophagoscope tube, size 4, length 30 cm 4. Oesophagoscope tube, size 3.5, length 18.5 cm 5. Oesophagoscope tube, size 3, length 18.5 cm 6. Prismatic light deflector ,autoclavable with connection for fibreoptic light cable 7. Rubber telescope guide 8. Adjustable magnifier (swivel action) autoclavable 9. 0 degree telescope, diameter 2.9 mm, autoclavable, fibreoptic light transmission incorporated 10. Optical forceps,2x2 tip, with spring action handle for use with telescope (for
01 set
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 439 -
coins and flat foreign body) to be used with 30 cm oesphagoscope 11. Optical forceps with spring action handle for use with telescope (for peanuts and soft foreign body) to be used with 30 cm oesphagoscope 12. Optical forceps with spring action handle for hard foreign bodies to be used with 30 cm oesphagoscope 13. Peanut removal forceps with double action jaws, sheath diameter 1.5mm,working length 35cm 14. Biopsy and foreign body forceps, double action jaws, sheath diameter 1,5mm, working length 35cm 15. Alligator forceps for hard foreign bodies, double action jaws, sheath diameter 1.5mm, working length 35cm 16. Cupped forceps for biopsy, double action jaws, sheath diameter 1.5mm, working length 35cm 17. Straight suction tube with rubber tip, working length 35cm 18. Straight cotton applicator working length 35cm - 3 such
4 Rigid bronchoscopy set, adult
Rigid bronchoscopy set, adult 1. 30 degree telescope, diameter 5.5mm, length 50cm, autoclavable, fibreoptic light transmission incorporated 2. 90 degree telescope diameter 5.5mm, length 50cm, autoclavable, fibreoptic light transmission incorporated 3. Rigid bronchoscope, size 8.5, length 43cm 4. Rigid bronchoscope, size 7.5, length 43cm 5. Rigid bronchoscope, size 6.5, length
01 set
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 440 -
43cm 6. Deflecting device for bronchoscopes and telescopes 7. FLUVOG Adapter with sliding glass window plug, sealing cap, notched lense and keyhole opening, movable 8. Adapters to respirator - 2 such 9. Rubber telescope guides - 2 such 10. Glass window plug - 2 such 11. Instrument guides for suction catheter - 2 such 12. Injection canula for positive pressure assisted ventilation, LUER lock, outer diameter 3.5 mm for use with bronchoscopes 13. Optical forceps, alligator, large jaws for hard foreign bodies 14. Optical biopsy forceps, circular cup, 4.3mm 15. Flexible forceps for biopsy 16. Alligator forceps for hard foreign bodies, double action jaws, diameter 2.5mm, working length 50cm 17. Peanut removal forceps, double action jaws, sheath diameter 2.5mm, working length 50 cm 18. Cupped forceps for biopsy, double action jaws ,sheath diameter 2.5mm, working length 50 cm 19. Cotton carrier, working length 50cm - 6 such 20. Sponge holder with spring handle, working length 50cm 21. Cytology brush with ring handle, working length 55cm 22. Coagulation suction tube, insulated, working length 50 cm accompanied by unipolar high frequency cord with 5mm
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 441 -
plug, length 300cm 23. Straight suction tube with rubber tip, working length 50cm - 2 such 24. Curved suction tube with rubber tip, working length 50 cm 25. Suction tubes 4mm diameter, length 50 cm - 2 such 26. Aspirator, can be connected to suction tubes or suction catheter 27. Spare glass for aspirator 28. HUZLY Aspirator and bronchial irrigator 29. Laryngeal syringe, 5ccm, LUER lock, with canula 30. Bronchial atomizer, with graduated container and rubber bulb, length 50cm 31. Laryngeal atomizer with bulb, length 50 cm 32. Suction catheter, 7 Fr with connector 33. Suction catheter, 5 Fr with connector
5 Rigid bronchoscopy set, Paediatric
Rigid bronchoscopy set, Paediatric 1. Bronchoscope size 6, length 30cm 2. Bronchoscope size 4.5, length 30cm 3. Bronchoscope size 3.7, length 30cm 4. Bronchoscope size 3.5, length 26cm 5. Bronchoscope size 3, length 26cm 6. . FLUVOG Adapter with sliding glass window plug, sealing cap, notched lense and keyhole opening, movable 7. Adapters to respirator - 2 such 8. Rubber telescope guides - 2 such 9. Glass window plug - 2 such 10. Instrument guides for suction catheter, short, for children and infants - 2 such 11. Injection canula , only, LUER lock, outer diameter 3.5 mm for use with bronchoscopes - 2 such 12. Prismatic light deflector, autoclavable
01 set
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 442 -
with connection for fibreoptic light cable 13. Cotton applicator, working length 35cm - 3 such 14. Sponge holder with spring handle, working length 35cm 15. Foreign body basket with ring handle, working length 35cm 16. Cytology brush with ring handle, working length 35cm 17. Straight suction tube with rubber tip, working length 35cm 18. Curved suction tube with rubber tip, working length 35cm 19. Suction tube, 3mm, working length 35cm, curved 20. Bronchial atomizer, graduated container and rubber bulb, working length 40 cm 21. Graduated containers - 2 such 22. Aspirator with spare glass and cut off hole, can be connected to suction tube or catheter
6 AUDIOMETER
AUDIOMETER REQUIREMENT The audiometer should have the following specifications: *It should be a Clinical PC-based audiometer. *The manufacturer should provide instructions and provision for calibrating the instrument. *The following tests should be able to be performed by the audiometer:
Pure tone audiometry, Speech
audiometry ( Including Speech
reception threshold and speech
discrimination score), SISI, ABLB,
01 set
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 443 -
AUTO THRESHOLD , TONE DECAY
*It should have the following provisions: SMPS
Switch Mode Power Supply
capable of withstanding extreme
voltage fluctuations (115 V to 270
V)
INPUT: Tone, Speech, Tape, Pulse
Tone.
OUTPUT: Left, Right, Bone, L + R.
F/F Left, F/F Right, F/F L+R.
HEADPHONES: TDH-39/TDH-49.
BONE: B-71 BONE CONDUCTOR.
Air : 120 dB Max, 125 Hz to 12
kHz., -20 dB Min.
Bone : 80 dB Max, 250 Hz to 6
kHz., -20dB Min.
Noise : Wide Band, Narrow Band,
Speech Band.
Built-in Mike, Ext. Mike, Mike
Sensitivity Control.
Interrupt Lock.
Printer Facility-Sequential Merged
Graphs.
Memory Review.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 444 -
Computer Interface.
Storage of the patient data in the
hard disc for future reference.
Connectivity to an external USB
Printer to print the reports.
7 IMPEDENCE AUDIOMETER
IMPEDENCE AUDIOMETER
It should meet the international
standards
Should be able to test the following
3. Tympanometry
4. Acoustic reflex test
Should have facility for producing
printed report
Should have facility for data storage
01 set
8 TYMPANOMASTOID SET
SURGICAL INSTRUMENTS TYMPANOMASTOID SET
1. SHEA aural speculum – set of 4,
black finish – 3 sets
2. Tumarkin tapered slotted aural
speculum – set of 4 – 3 set
3. Adsonforcep – plain – S.Steel – 6
such
4. Adsonforcep – 1x2 teeth – S.Steel
– 6such
01 set
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 445 -
5. Hartmann aural forcep – 3 such
6. Lempert endaural speculum –
right – 3 such
7. Mollison self retaining mastoid
retractor 3 such
8. Plester self retaining retractor 2x2
prong – 3 such
9. Plester self retaining retractor 3x3
prong – 3such
10. Plester self retaining retractor –
right solid blade – 3 such
11. Plester self retaining retractor –
left solid blade – 3such
12. Farabeuf periosteum elevator –
straight – 3 such
13. Freer’selevator double ended – 3
such
14. Howarth elevator – 3such
15. Zollner suction tube with 4
microtips – 3 such
16. Verhoeven suction tubes – no.
12,14,16,18,20,22,24 – 3 sets
17. Verhoeven suction tube adaptor –
3 such
18. Micro aural crocodile serrated –
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 446 -
fine straight – 3 such
19. Micro aural cup – straight – 3 such
20. Micro aural cup – upward – 3 such
21. Micro aural scissors – straight – 3
such
22. House dieter malleus nipper – up –
3such
23. House dieter malleus nipper –
down – 3 such
24. Caw Thorne hook – micro pick 90
degree angled – 3 such
25. Caw Thorne hook – micro pick 45
degree angled – 3 such
26. Wullstein needle – very slight
curved – 3 such
27. Wullstein needle – slight curved –
3 such
28. Wullstein needle – straight – 3such
29. Rosen curette curved straight
shaft – 3uch
30. Sickle knife – 3 such
31. BealesRaspatory – 3 such
32. Circular cutting knife 60 degree – 3
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 447 -
such
33. Ball probe – 3such
34. Rosen elevator for lifting drum –
3such
35. Plester first incision knife – 3 such
36. Curved circular cutting knife – 3
such
37. House curette double ended – 3
such
38. House curette double ended
slightly curved – 3 such
39. Myringotomy knife – 3such
40. Small curved scissor – 3 such
41. Mastoid micromotor drill (30000
rpm) 1
42. Straight hand piece for mastoid
drill 1
43. Contra angle hand piece for
mastoid drill 1
44. SS cutting burrs (
8mm,6mm,4mm,2mm,1mm0.8m
m) 1 each
45. Diamond polishing burrs (6mm,
4mm, 2mm 1mm) 1 each
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 448 -
9 STAPEDECTOMY SET
STAPEDECTOMY SET Each instrument one number required
Round Knife 45° diameter 1
mm, length 16 cm
Flag knife
Micro elevator
Sickle Knife, double-edged,
standard model, slightly
curved, length 16 cm
Pick 90°, 16 cm, 0.6 mm
Pick 90°, 16 cm, 0.8 mm
Ear Forceps extra delicate,
serrated, 0.4 x 3.5 mm,
working length 8 cm
Ear Forceps extra delicate,
pointed, serrated, 1 x 4.5 mm,
working length 8 cm
Scissors delicate standard
model, blade length 8 mm,
working length 8 cm
Malleus Nipper, extra delicate,
upbiting, width 0.8 mm,
working length 8 cm
Ear Forceps extra delicate, oval
cupped jaws, 0.6 mm, working
01 set
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 449 -
length 8 cm
Ear Forceps extra delicate, oval
cupped jaws, 0.9 mm, working
length 8 cm
Perforator, 16 cm,diameter: 0.4
mm.
Perforator, 16 cm,diameter: 0.6
mm.
Perforator, length 16 cm,
diameter 0.8 mm
Footplate burr
Measuring Rod, length 16 cm,
Marker pins at 3 mm, 4 mm, 5
mm
Holding Forceps, for holding
Stapes and Total Prostheses,
length 13.5 cm
Crimping Forceps for Total
Prosthesis, length 10.5 cm
Scissors, for Total Prostheses,
length 11 cm
Micro Hook, 2.5 mm, 45°,
length 16 cm
Diamond Straight Shaft Burr,
length 7 cm, Diameter 1.4 mm
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 450 -
Needle. 16.5 cm, light curve.
Seeker, ball end angled 45°,
15.5 cm, size 3.
Suction Cannula, angular, LUER-
Lock, working length 6 cm,
O.D. 0.7 mm- 2 in number
Suction Cannula, angular, LUER
Lock, working length 6 cm,
O.D.: 1.0 mm- 2 in number
Suction Cannula, angular, LUER-
Lock, working length 6 cm, 1.3
mm- 2 in number
Suction Cannula, angular, LUER-
Lock, working length 6 cm,
O.D.: 1.5 mm- 2 in number
Suction Cannula, angular, LUER-
Lock, working length 6 cm,
O.D.: 2.0 mm- 2 in number
Adaptor, for suction cannulas- 2
in number
Curette, large, spoon sizes 2 x
3.2 mm and 1.6 x 2.6 mm,
length 15 cm
Curette, small, spoon sizes 1 x 1.6 mm and 1.3 x 2 mm, length 15
10 ADENO-ADENO-TONSILLECTOMY
01 set
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 451 -
TONSILLECTOMY
1.BoyleDevis mouth gag- 1 (with full set of tongue blades) 2.Draffin Bipod- 2such 3.Magauran plate-1such 4. Tonsil holding forcep-1such 5. Tonsillar knife with dissector - 1such 6.Mollison’s blunt tonsillar dissector and anterior pillar retractor-1such 7.Serrated tonsillar dissector and anterior pillar retractor- 1such 8.Long straight tonsil hemostatic forceps- 1such 9. Naegus artery replacement forcep- 1such 10.Naegus ligature slipper and knot tier- 1such 11. Eve’s tonsillar snare- 1such 12. Long dissecting scissor- straight- 1such 13.Yankauer’s oral suction- 1such 14. St. clair thomson’s adenoid curette with cage- 3 sizes- 1each 15. Long tooth forcep- 1such 16. Quinsy forcep- 1such
11 SEPTO-RHINOPLASTY
SEPTO-RHINOPLASTY
1. Thudicum’s nasal speculum- 3 sizes- 1 each
2. St. Clair thomson’s long bladed nasal speculum- 3 sizes- 1 each
3. Killian’s self retaining nasal speculum- 2
4. Freer’smucoperichondrium elevator-2
5. Luc’s forceps- 2 sizes- 1 each
01 set
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 452 -
6. Killian’s nasal gouge- 1such
7. Tilley’s antral Harpoon-1such
8. Tilley’s antral trocar and cannula-
1such
9. Tilley’s Forcep- 1 such
10. Turbinectomy scissors- 1 such
11. Walsham’sforcep- 1 such
12. Asch’s forcep- 1 such
13. 2mm osteotome-1 such
14. 2mm osteotome with guard-1
such
15. 10mm osteotome-1 such
16. 10mm osteotome with gurad-1
such
17. Mallet-1 such
18. Cartilage scissor-1 such
19. Aufritch retractor-1 such
20. Killian’s ala retractor-1 such
21. Push rasp-1 such
22. Pull rasp-1 such
23. Joseph saw-1 such
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 453 -
12 MICROLARYNGOSCOPY AND MICROLARYNGEAL SURGERY
MICROLARYNGOSCOPY AND MICROLARYNGEAL SURGERY
1. Kleinsasser’smicrolaryngoscope-
1such
2. Anterior commisure laryngoscope-
1 such
3. Light cable for laryngoscope-2
4. Riecker’s chest holder
5. Microlaryngeal cup forceps-
straight, right turn, left turn, up
turn- 1each
6. Microlaryngeal alligator forceps- 2
7. Microlaryngeal scissors- straight,
right turn, left turn- 1 each
8. Microlaryngeal blunt dissector
with handle- 1 such
9. Microlaryngeal knife with handle-
1such
10. Vocal cord retractor with handle-1
such
11. Microlaryngeal suction- 1 such
12. Microlaryngeal suction with
diathermy- 1such
01 set
13 GENERAL
GENERAL INSTRUMENTS
01 set
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 454 -
INSTRUMENTS
1. AdsonTooth forceps- (5”)-4
such
2. AdsonNontooth forceps-
(5”)-4 such
3. Needle holder- (6”/5”/4”)- 6
each
4. Curved needle holder-( 4”)- 4
5. Mosquito Artery forceps-
curved(4”)- 24
6. Medium artery forceps-
curved(5”/4”)- 6 each
7. Large artery forceps-
curved(7”)- 6
8. Right angle artery forceps-
large/medium(7”)- 4
9. Kocher’s artery forceps(6”)- 4
10. Sinus forceps-2
11. Kocher’s gland holding
forceps(6”)- 2
12. Babcock’s gland holding
forceps(6”)- 6
13. Alle’s tissue holding
forceps(5”)- 12
14. Tissue cutting scissors-
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 455 -
straight/curved(5”)- 2 each
15. Medium dissecting scissors-
curved(6”)-4
16. Small dissecting scissors-
curved(4”)- 4
17. Langenberg’s retractor- 4
18. Metal suction cannula- 3
sizes( 2.5mm/3mm/4mm)- 4
each
19. Humpy’s knife- 1
20. Malleable sinus probe-2
21. Towel clip- 24
22. Kidney dish( 6”/8”)- 4 each
23. Sponge Holding Forceps (8”)-
6
24. Catspaw- 4 pair
25. Gallipot-6
26. Tilley’s Forceps- 4
27. Hartman’s forcep-4
28. Chettle forcep-6
14.
High Speed Microdebrider system for Nasal Endoscopic Surgeries, consisting of :-
1pc
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 456 -
Main Console
1. The system should be suitable for wide variety of procedures ranging from Rhinology, Other transnasal procedures, Otology/ Neuro otology / Nasopharyngeal / laryngeal / tracheal / bronchial/ and hand piece for Adenoid specific application.
2. Should have large Touch screen monitor. The various parameters should be able to adjust either from touch screen panel or from the multifunction foot switch.
3. Should be able to connect multiple hand pieces at a time like debrider hand pieces (Up to 5000 RPM in Oscillating mode & 12000 RPM in Forward mode), low speed Otology drills (Up to 16000 RPM) and High speed Otology drills (Up to 80000 RPM).
4. Should have inbuilt pumps each for Irrigation and
Cooling.
5. Should have multifunction ergonomically designed foot control with light emission for easy identification.
6. Should be able to control Speed / Mode, Forward /
Reverse toggle, Active hand piece change from the Foot control itself.
7. Should have option for remote control Irrigation to
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 457 -
operate from sterile area.
8. Should have in built Lens cleaning system.
9. Should have 0 Degree, 30 Degree, 45 Degree & 70 Degree endoscope sheath compatibility for Automatic Lens cleaning system.
10. Should have provision to connect facial nerve
monitor with the Otology drill.
11. Main Console should have an option to operate manual foot paddle from console itself in case the foot paddle are not working.
12. Should have the provision to mount the console on various sizes of IV pole.
Hand piece:
1. Should be compatible with main console.
2. Should be able work up to the speed of 12000 RPM in forward rotation and 5000RPM in oscillation mode.
3. Should have finger tip control to rotate only the tip of the blade up to 360 deg.
4. Should have straight suction path to reduce clogging and allow efficient tissue removal.
5. Should have integrated blade locking system to lock the blade tip rotation.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 458 -
6. Should have integrated side grooves and cable clips to provide better tubing management.
7. Should have Titanium body to avoid rusting.
8. Should be able to operate 120 Degree curved blade for Maxillary Sinus Application.
9. Should be able to operate Diamond & Cutting burs for DCR Surgeries.
10. Should have provision to operate Inferior Turbinate blade for Turbinoplasty and Adenoid blade Adenoidectomy.
11. Should be compatible with Frontal Trephination System.
Microdebrider blades and burrs
1. Straight Blade 0 Degree 4 mm- 01 pc. 2. 40 Degree Curved Blade 4 mm 01 pc. 3. 60 Degree Curved Blade 4 mm 01 pc. 4. 120 Degree Curved Blade 3.5 mm 01 pc. 5. Inferior Turbinate Blade 2.9 mm 01 pc. 6. 40 Degree Adenoid Blade 4 mm 01 pc. 7. Tonsillectomy Blade 4 mm 01 pc. 8. High Speed Diamond DCR Bur 2.5 mm 03
pcs. 9. Tapered Diamond Bur 4 mm 01 pc. 10. Laryngeal Blade 2.9 mm 22.5 cm Long 01 pc.
High Speed Otology Drill (Motor) 1. Coolant Tubing 02 pcs. 2. 7.5 cm Straight & Angled Attachment 01 pc.
Each 3. 1 mm to 7 mm Cutting Bur 01 pc. Each
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 459 -
4. 1 mm to 7 mm Diamond Bur 01 pc. Each Low Speed Otology Drill (Motor)
1. Crura Saw 0.75 mm 01 pc. 2. Perforator 0.5 mm 01 pc. 3. 0.6 mm to 0.8 mm Diamond Burr 01 pc.
Each Automatic Lens Cleaning System
1. 0 Degree Endoscopic Sheath 05 pcs. 2. 30 Degree Endoscopic Sheath 05 pcs. 3. 45 Degree Endoscopic Sheath 05 pcs. 4. 70 Degree Endoscopic Sheath 05 pcs. 5. Finger Switch 01 pc.
ALL THE ABOVE EQUIPMENTS SHOULD BE CE AND FDA & ISO APPROVED AND FROM SINGLE MANUFACTURER COMPANY NO LOCAL ACCESSORIES WOULD BE ACCEPTABLE. NO ECONOMY CLASS, E CLASS OR E LINE MODEL SHOULD BE ACCEPTED.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 460 -
SL. NO. NAME OF
EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
REQUIREMENTS /QTY(FOR ESI-PGIMSR, JOKA)
Unit Cost (to be filled in by tenderers)
Total Amount (in
figure)
Buy back rate(in figures)
Final amount
after reducing buy
back rate
DEPARTMENT OF MICROBIOLOGY ESI-PGIMSR, JOKA 1 Real time
Polymerase Chain Reaction (PCR) System with Qualitative and Quantitative detection
SPECIFICATIONS Real time Polymerase Chain Reaction (PCR) System with Qualitative and Quantitative detection
a. The Real time PCR System must have International and/or National quality and safety certification, e.g. CE and/or UL/cUL and/or ISI certified and IVD certified.
b. The Real time PCR System should be an open platform system, and must have provisions for using third party kits and reagents for the molecular diagnosis of infectious diseases.
c. The Real time PCR System must at least have the following In vitro Diagnostics approved kits available from the same manufacturer which are pre-validated on the quoted model :
i. Human Immunodeficiency virus
01pc
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 461 -
ii. Hepatitis B virus
iii. Hepatitis C virus
iv. Cytomegalo virus
v. Ebstein Barr virus
vi. Herpes Simplex virus
vii. Mycobacterium tuberculosis
d. There should be provision for using the system as simple Thermocycler for qualitative molecular detection of infectious diseases.
e. The Automated Real time PCR System should be accompanied with a desktop or laptop computer and printer system (required for the functioning and data storage and printing of reports) with original operating system and free software support for the lifetime of the machine.
f. The Automated Real time PCR System should have already been installed in at least two (02) reputed Academic and / or Medical institutions and / or reputed accredited diagnostic laboratories in the Eastern region of India.
g. Technical Parameters:
Features Specification
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 462 -
Thermal Cycler Mechanism
Air based heating and cooling mechanism for maximum uniformity with even heating and cooling.
Sample Layout Should be flexible for the tube input volumes having capability of running 96 or more samples.
Additional Intra-assay Centrifugation
Any additionalstep of centrifugation of tubes while performing the assay should NOT be there.
Uniformity
Should have uniform temperature distribution. Should maintain iso-optical detection in all wells for maximum uniformity. Temperature uniformity should be in the range of ±0.02oC.
Chemistries Should come with standard chemistries for gene expression, quantification, mutation scanning, genotyping and methylation studies.
Temp Range Up to 99℃ Light Source
Different LED’s with 5 different wavelengths with minimum cross-talks (one LED with one wavelength). The assay should not be based on onesingle wavelength of light.Should be able to detect all wells equally with same optical path length.
Light Source Lifespan
Warranty on light source for minimum of 10 years.
Excitation Plexing
Should be minimum 5 plex. Should have capability of further increasing the multiplexing beyond 5-Plex in singe tube.
Dynamic Range Should be of 10 orders of magnitude Reaction Volume
10 µl-100 µl
Passive Reference Required?
Should NOT require any passive reference dye
Tube Format Should be able to mark the caps of the tubes. Should have flexible tube format. NOT CAPILLARIES.
Software Unlimited user Software license with maximum feature should come absolutely free of cost for the life of the machine.
In vitro diagnostics
Real Time In vitro Diagnostics approved validated kits on quoted model
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 463 -
Approval as mentioned above should be available with instrument manufacturer. Instrument should also be In vitro diagnostics certified for use in diagnostic laboratory.
2 Automated
(Multicapillary)
Capillary Electroph
oresis System
Automated (Multicapillary) Capillary Electrophoresis System:
a. The automated multicapillary electrophoresis System must have International and/or National quality and safety certification, e.g. CE and/or UL/cUL and/or IVD certified and/or ISI certified.
b. It should be a fully automated capillary electrophoresis system for fragments of DNA and RNA, which is based on high throughput nucleic acid analysis of at least 60 samples in one run within 30 minutes.
c. System should comewithReady-to-rungelcartridgesallowing samplesto be analyzed replacing laborintensiveagarosegel electrophoresiseliminating the need for handling carcinogenic compounds likeethidium bromide.
d. Post PCR samples should be directly analyzed for fragment analysis using
01pc
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 464 -
the system without prior purification of samples.
e. The instrument should be usable for genotyping, restriction digestion, qualitative monoplex or multiplex PCR, PCR-based cDNA library screening and other routine molecular biology applications.
f. System should work with an input volume of equal or less than 1 μl offering a high sensitivity ofupto 1000pg.
g. Instrument should come with user-friendly analysis software including an accompanying Laptop with original operating system and free software support and upgradation for the lifetime of the instrument.
h. The Real time monitoring of the sample analysis should be visible on the computer screen.
i. Operating temperature : 20-28°C
j. Excitation Source : light-emitting diode (LED)
k. Detection Source : Photomultiplier Tube
l. The instrument must eliminate the need for a separate Gel Doc system
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 465 -
after Electrophoresis.
m. The instrument should be able to provide Standardized and accurate analysis with a resolution down to 5 base pairs.
3 Biosafety
Cabinet: Class II Type A2
with accessorie
s
Biosafety Cabinet: Class II Type A2 with accessories:
a. The Biosafety cabinets must have International and/or National quality and safety certification, e.g. CE and/orUL/cUL-listed and/or ISI certified.
b. Class II Type A2 biological safety cabinet with factory installed programmable UV light for surface disinfection.
c. Standard 4 ft model: Exterior dimension preferably not to exceed, 52 X 64 X 33 inch (W X H X D) ± 10%
d. Double Blower system; Brushless DC motor technology for saving energy consumption.
e. SmartFlow Indicator, with Digital airflow verification technology (The balance of downflow and inflow should control the cleanliness and containment – preventing room
02pc
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 466 -
contamination from reaching the BSC work surface and keeping any biological hazards in the BSC work area from escaping out the front opening.)
f. Ergonomic design with 10° Slopped front, preferably with Armrest.
g. Supply / exhaust air filter specification: H14 HEPA or better. The HEPA or ULPA filters shall capture contamination in the room air and in air drawn from the BSC work area to create clean downflow and the exhaust air.
h. Service Valves (through side walled access ports)
i. Receptacles in the Rear Wall: load capacity of up to 5A
j. Smart Clean front window Design easily lowered for cleaning of inner surface & protects operator.
k. The provider must provide at least two (2) ergonomically designed compatible, height adjustable hydraulic or screw turn low back support revolving stools with each Biosafety cabinets for user operations.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 467 -
4 Micropipettes (0.5-10μL set, 10-100μL set, 100-1000μL set) with disposable Tips and autoclavable boxes.
Micropipettes (0.5-10μL set, 10-100μL set, 100-1000μL set) with disposable Tips and autoclavable boxes.
a. Each set shall contain 3 adjustable volume Fully autoclavablemicro pipettes of the following ranges:
i. 0.5 - 10μl
ii. 10 - 100μl
iii. 100 - 1000μl
b. Six (06) reusable T.I.P.S boxes with 96 Pipette tips in each boxes; Three pairs of boxes are to be compatible to the above three different sets of Micro pipettes.
c. The boxes and the tips should also be fully autoclavable.
d. The micropipettes should have Spring Loaded Tip Cone for improved ergonomics which should be tight fit to the tip.
e. Adjustment opening to adjust the pipettes to a specific liquid and volume.
f. Control Button with very low operating force, positioned for perfect ergonomics.
g. Ejector withvery low operating force,
02 sets
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 468 -
positioned for perfect ergonomics.
h. Volume Display: 4 Digits with magnification.
i. There should be quick connection clip toremove lower part easily.
5 Vortex
Mixer Vortex Mixer (with accessories):
a. Digital vortex Mixer for Molecular Biology Applications with International and/or National quality and safety certification, e.g. CE and/orUL/cUL-listed and/or ISI certified.
b. Should be ideal for applications demanding repeatable results.
c. Variable speed control at least from 500 to 3000 rpm. A higher range is allowable.
d. Touch keypad controls and LED display for speed and time. Not merely Analog controls, for ensuring reproducibility in molecular diagnostics.
e. Microprocessor control to maintain set speed for consistent mixing.
f. Timer displays elapsed time; auto shutoff at end of cycle.
01pc
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 469 -
g. Should be allowable to be used in 220 to 240 V and 50/60 Hz electrical supply.
h. Should have robust durable electrical connectivity conforming to standard Indian sockets.
i. The following accessories have to be quoted along with the vortex mixer, which can be steadily fitted and connected with the mixer:
I. 24 to48 numbers vertical Microtube Holder for mixing 0.25 to 2.0mL microcentrifuge tubes / PCR tubes or high-density foam inserts to accommodate 24 to 60 microtubes.
II. Vertical tube holder for mixing at least four (04) 50 ml tubes together.
III. Vertical tube holder for mixing at least four (04) 5 ml (09 to 13 mm diameter) tubes together.
6 Molecular
grade DNAse RNAse free
Molecular grade DNAse RNAse free Water Purification System
a. The entire water purification system
01pc
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 470 -
Water Purification System
should be equipped with three part equipments, quoted together by the same bidder, including:
i. A Pretreatment Water filtration reverse osmosis system
ii. A Pretreatment Iron, hardness and particleremoval system
iii. A Molecular grade Water purification system proper.
b. The Pretreatment Water filtration reverse osmosis system (i) and the Pretreatment Iron, hardness and particle removal system (ii) must have National and/or International quality and safety certification, e.g. ISI and/or CE and/or UL/cUL certified.
c. The Molecular grade Water purification Systemproper (iii) must have International and/or National quality and safety certification, e.g. CE and/or UL/cUL and/or ISI certified.
d. The Pretreatment Water filtration reverse osmosis system (i) and the Pretreatment Iron, hardness and particle removal system(ii) should be able to be connected in series connection, directly from the pipeline ground-water feed and should be able to deliver output water quality
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 471 -
compliant to the acceptable limit of the feed water of the Molecular grade Water purification system proper(iii) as mentioned below in tight fitted series connection.
e. The Pretreatment Water filtration reverse osmosis system (i) and the Pretreatment Iron, hardness and particle removal system(ii) should be able to deliver at least 15litres of water per hour to the Molecular grade Water purification system proper(iii).
f. The Pretreatment Water filtration reverse osmosis system (i) and the Pretreatment Iron, hardness and particle removal system (ii) should at least be equipped with the following technology:
a. * 2 Stage pretreatment system
b. * 5 micron and 1 micron wrapped type depth filter
c. * 3 Pressure gauges
d. * Less than 50 Db noise levels
e. * Automatic low/high pressure cut off
f. * DC pump with 0-2 pressure at 120L /hr
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 472 -
g. * Inlet screen filter to DC pump
h. * Optional filters : 0.5 micron
i. * Optional filters : Activated carbon
g.The Molecular grade Water purification system proper (iii) should be able to deliver the required quality of pure and ultrapure water from its feed water acceptance level of:
5) 2000micro Siemens conductivity
6) Fouling Index (SDI) < 12
7) Total Chlorine < 3 ppm and
8) TOC <2000 ppb
h.The Molecular grade Water purification system proper (iii) should beable to deliver reagent Grade Type 2 water (pure quality) and Reagent grade Type 1 standard water (ultrapure quality) as defined by standard international quality control organizations like ISO:3696 standards and / or Clinical and Laboratory Standards Institute-Clinical Laboratory Reagent Water standards and / or ASTM standards.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 473 -
i) The Molecular grade Water purification system proper (iii) should have two different points of delivery. It should be able to deliver through one point of delivery, reagent Grade Type 2 water (pure quality) bacteria and pyrogen free water, which may be used for basic laboratory needs, such as buffer and reagent preparation, microbiology media preparation, histology and rinsing of glassware of the following grade:
Type 2 Pure grade Water outlet
Parameter Value
Resistivity, Mega Ω @ 25 °C 10 – 15
Programmable water flow rate / minutes ̴01
TOC, ppb (μg/l) < 30
Bacteria, cfu/ml < 10, reducible to < 0.1 *
Particulates > 0.22 μm, Particulates/ml < 1 *
Silica rejection 99.9%
Pyrogens (endotoxins), EU/ml < 0.001 **
RNases, ng/ml < 0.01 **
DNases, pg/μl < 4 **
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 474 -
(*) With special filter for microbiological grade water
(**) With special filter for molecular grade water
j.The Type 2 water (pure quality) production system / chamber of the Molecular grade Water purification system proper (iii) should be enabled at least with the following technologies:
1. Pretreatment cartridge
2. Reverse Osmosis with a high flux polyamide membranewith 94- 99% ion rejection backed by Pump with temperature feedback mechanism so that the flow rate should be 3 ltr/hr at room temperature .
3. Electro Deionization with auto regeneration by electric current, eliminating the need for chemical regeneration or replacement of DI resin cartridges with carbon beads at cathode of the EDI module to prevent scaling inside of the module
4. Activated Carbon cartridge
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 475 -
5. UV lamp with 254 nm Wave lengthbefore entering the tank
6. Recovery loop with capillary tube and diaphragm valve to minimize water wastage
7. Carbon beads at cathode of the EDI module to prevent scaling of the module
8. Permeate divert valve which will divert low quality water to the drain
9. Coaxial resistivity cell with a flow through design and a cell constant of 0.01cm-1
10. Display both compensated and non-compensated temperature accurate within ±0.1°C.
11. The reservoir tankshould be blow moulded, cylindrical PE reservoir with a conical bottom and opaque walls with a minimum of 30 litres capacity.
12. Sensor rod float switch, programmed to have high
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 476 -
and low level cut-off based on water level in the tank.
13. The reservoir tank should possess a tank vent filter made of soda lime, activated carbon and 0.22 micron hydrophobic membrane to trap contaminants present in atmospheric air.
14. The Point of Delivery units should be of adjustable height and rotating arm-adjustable to any glassware.
15. There should be multicolour monitor displaying resistivity, TOC, level of water in reservoir, volume dispensed etc.
k.The Molecular grade Water purification system proper (iii) should also be able to deliver through a different point of delivery, Type 1 water (ultrapure) DNA, RNA, DNAse, RNAse free water for molecular biological applications, suitable for genomics applications (quality at least equivalent to DEPC-treated water) and cell culture of the following grade:
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 477 -
Type 1 Ultrapure Molecular grade Water outlet
Parameter Value
Resistivity, Mega Ω @ 25 °C Around 18.2 (> 18)
Programmable water flow rate / minutes ̴ 0.05 to 2
TOC, ppb (μg/l) < 5
Bacteria, cfu/ml < 0.1 *
Particulates > 0.22 μm, Particulates/ml < 1 *
Pyrogens (endotoxins), EU/ml < 0.001 **
RNases, ng/ml < 0.01 **
DNases, pg/μl < 4 **
(*) With special filter for microbiological grade water
(**) With special filter for molecular grade water
l).The Type 1 water (pure quality) production system / chamber of the Molecular grade Water purification system proper (iii) should be enabled at least with the following technologies:
1. Water source feed should be a closed connection from the Type 2 water reservoir tank eliminating any possibilities of contamination.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 478 -
2. Re-filtration through two stage mixed bed ion exchange and activated carbon cartridge to remove ionic and organic contaminants to trace levels.
3. Low pressure mercury vapour lamp made of quartz with 185/254 nm dual wavelength UV lamp.
4. Should contain high-precision resistivity meters with following features-
a. Coaxial electrodes to warrant cell constant stability.
b. Low cell constant (0.01 cm-1) for optimum measurement accuracy of low ionic contamination
c. Temperature measurement with a 0.1 °C resolution for proper report of temperature compensated resistivity
5)Should contain a built in TOC monitorwith a Quartz celland UV lamp which should accurately measure online TOC from 1- 999 ppb.
6) To prevent deterioration of water quality during periods of non-use, the ultrapure water system will be
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 479 -
able to recirculate water to maintain high water quality.
7) Special filter packs for ultrafiltration and DNAse RNAse removal at the point of delivery or dispensing unit.
8) Controllable & user login password protected dispensing unit for Type 1 ultrapure water with ultrafiltration cartridge at the collection end with Log Reduction Value between 5.6 and 7.65 over challenge range of 220 and 22000 Eu / mL.
m.To avoid maintenance errors and to improve traceability, the internal primary consumable water purification cartridges should have a built-in RFID tag.
n. To comply with Standard requirements, the resistivity meter shall be able to display the non-temperature-compensated resistivity.
7 Automati
c Electronic Laboratory Balance
Automatic Electronic Laboratory Balance
a. The Electronic Laboratory balance should have International and/or National quality and safety certification, e.g. CE and/or UL/cUL-listed
01pc
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 480 -
and/or ISI certified.
b. The maximum weighing capacity should be 500 grams with a tare range of 0 to 500 gm. A higher range is allowable.
c. The minimum readability should be 0.1 mg differences.
d. The balance should be fitted with durable electrical connectivity compatible to Indian electrical standard sockets and operable in 220 to 240 V and 50/60 Hz electrical supply.
e. The balance plate should be covered with High draft shield fibre / glass covers with mounted front and rear fibre / glass panels, including sliding doors.
f. The balance should have digital electronic display and preferably soft touch controls for Power, Tare and calibration options.
8 Carbon
dioxide
Carbon dioxide (CO2) Incubator:
01pc
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 481 -
(CO2)
Incubator
Technical specifications
1. CO2 Incubator with work chamber volume approx. 150 to 190 liters / 5.3 to 6.5 cu. ft (± 10%).
2. Air jacketed heating system with temperature control by microprocessor.
3. Temperature range from ambient +3 o C to + 55 o C.
4. Temp. Deviation with respect to time is + 0.1K.
5. Continuous air Contamination prevention by in chamber Class 100 HEPA Air Filtration.
6. Event based Decontamination with in-built moist heat High temperature cycle, with ease operability, preferably single switch operation of sterilization cycle. The built-in automatic decontamination facility to remove bacteria, fungi, spores, mycoplasma etc without removing sensor, fan or any other fitting. The system should employ automatic decontamination routine at moist heat of 90o C or equivalent.
7. CO2 control by Microprocessor based & by heat resistant Thermal Conductivity detector to withstand heat of decontamination.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 482 -
8. CO2 range 0 to 20% or better and CO2 accuracy + 0.1% by volume.
9. System should have Interactive Control with Touch screen for rapid access of important information for each critical parameter in the Incubator.
10. Humidity range should be 95% rH or higher. Recovery time for humidity loss during door opening for 30 seconds upto 96% rH of initial value should not be more than 20 minutes.
11. At least 3 nos. stainless steel perforated shelves should be supplied.
12. It should be supplied with access port to allow any cable, plug or tubing to be easily inserted into or out of the chamber.
13. Interior chamber should be made of stainless steel with electropolish finishing of inner surface with rounded corners on all sides for easy cleaning. The shelves and fan impeller also should be made of stainless steel and should not have nuts or bolts for shelf supports to reduce the scope of growth of contamination. No plastic parts should be inside to avoid VOC.
14. Built-in audible and visual water level alarm should be available when the
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 483 -
water reservoir (water tray less system to avoid contamination) needs to be refilled to ensure a constant high level of humidity and to prevent cultures from drying out.
15. Independent electronic over temperature protection with separate sensor should be available for sample protection.
16. The system should have large digital display for both temp. & CO2 simultaneously.
17. System should have at least two doors, one main door and one glass doors.
18. Suitable for 230V, single phase 50Hz operation.
19. Suitable servo voltage stabilizer with high voltage low voltage cut off circuit, auto reset with delay timer and spike eliminator etc.
20. Double stage CO2 pressure regulator with stainless steel diaphragm.
21. 18Kg CO2 Cylinder filled with CO2 gas 99.5% or better purity required for operation of CO2 Incubator, along with cost of refill should also be quoted.
9 Hot air oven
Hot air oven Technical specifications
02 pcs
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 484 -
1. Should be CE certified internationally quality control approved instrument.
2. Corrosion-resistant galvanized steel chambers.
3. Digital display and timer facility 4. Upper temperature cut off ( automatic) 5. Microprocessor temperature control. 6. At least 2 tilt proof wire-mesh shelves 7. Chambers and heating elements should
made of corrosion resistant steel. 8. Chambers should be easy to clean. 9. Volume minimum 75 litres 10. Operating temperatures from 50° to
250°C. 11. Easy to use, microprocessor-controlled
touch button operation.
10 Automatic
Evacuatio
n-
replaceme
nt system
for the
culture of
anaerobes
,
capnophil
es, and
microaero
Automatic Evacuation-replacement system for the culture of anaerobes, capnophiles, and microaerophile:
1. Automatic evacuation-replacement system with at least One to Three (1-3) gas inlet connections: CO2, H2, and O2 and One to Four (1-4) jar outlet connections.
2. The System should be internationally quality control certified, e.g. CE / ISO / ISI certified.
3. The System should have pre-
01pc
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 485 -
phile programmed functions with easy to use, preferably single touch key operations for preparing Anaerobic, Microaerophilic and Capnophilic culture conditions.
4. Following associated transparent Polymethylmethacrylaat (PMMA) jars with Gas tight fit by means of a snap-shut adaptor on the lid of the jar and stainless steel petri dish holders of the following dimensions are required to be supplied along with:
a. Two (02) equivalent jars: Diameter and height: Ø =123mm, h=240mm (±10%) Volume: 2.75 L (±10%) Contents: 1 stack of 12 Petri dishes with Ø 9-10cm (±10%)
b. Two (02) numbers of Petridish holders: Petri dish holder for 12 Petri dishes with Ø 9/10cm made of stainless steel
c. Two (02) equivalent jars: Diameter and height: Ø =175mm, h=240mm (±10%) Volume: 5.65 L (±10%) Contents: 1 stack of 12 Petri
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 486 -
dishes with Ø 14.5cm (±10%)
d. Two (02) numbers of Petridish holders: Petri dish holder for 10 Petri dishes with Ø 14.5cm made of stainless steel
e. One (01) number micro well plate holder: Holder for micro-well plates of 9 x 13 cm, made of stainless steel
f. One (01) equivalent jars: Diameter and height: Ø =230mm, h=240mm (±10%) Volume: 9.66 L (±10%) Contents: 3 stack of 12 Petri dishes with Ø 10cm (±10%)
g. One (01) number of Petridish holder: Petri dish holder for 3 x 12 Petri dishes with Ø 9/10cm, made of stainless steel, to be fitted in the height of 240 mm jar.
5. Palladium coated catalyst pouches ideal for the big jars:
a. SIX (06) Sets of catalysts, ideal for the big size jars are to be provided along with,
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 487 -
which can be easily re-used by reactivation in Hot air oven.
6. Reducing valve: To reduce the pressure in the gas cylinder to the system working pressure, a reducing valve has to be provided with the gas cylinder(s). This must be a 2-step reducing valve, preferably calibrated and supplied by the same manufacturer, which has manufactured the Automated evacuation-replacement system. The working pressure should be adjustable to 1.8 Bar or 26 psi.
7. Option of user programming function (free user programming of oxygen level, gas mixture and evacuation level) should be there.
8. Option for Preprogrammed recipe for oxygen level, gas mixture and evacuation level should be there.
9. The bidder should also quote for 18Kg CO2, H2, and O2 Cylinders filled with CO2, H2, and O2 gases 99.5% or better purity required for operation, along with cost of refill should also be quoted.
11 Hot air sterilizer,
Power supply: 440 V,AC, 3 Phase Material of Construction: SS 304
2
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 488 -
160ºC
Motor : Supply: 0.5 HP: 1440 RPM: 1-0, 230 V AC: 50 Hz Exhaust: 2 HP 2800 RPM Blower (Impeller) : Supply: 210 x 117 Wmm Exhaust : ---- Dimensions: (W x D X H): 1060 x 1040 x 2150(Approximate) Bioclean work space: 877 x 660 x 610 Filters (W x D X H): Pre filter: size : 305 x 380 x 45 Fresh Air Filter: Type: EU-6 Intermediate: Size: 915 x 610 x 45 Type: EU-13 Final Filter: Size: 915 x 610 x 75 (ANTIMICROBIAL) Type: EU-13 Intermediate: Size: 915 x 610 x 100 (ANTIMICROBIAL) Type: EU-13 Exhaust filter: Size: 915 x 457 x 100 Type: EU-13 Differential pressure gauge : Magnehelic pressure gauge Across HEPA filter wrt. ambient: 0-25 mm Across work space wrt. ambient: 0-10 mm Illumination: UV light: 1.5' L & 30W FLU light: 1.5' L & 20W Special features: Virus burnout system
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 489 -
12 Venereal
Diseases
Research
Laboratory
(VDRL)
shaker
Bench top, 12” x 12” platform size Built in timer 0-15 minutes Maximum speed of 180 rpm Built in speed regulator
2
13 Macintosh
fields
anaerobic
jar
Anaerobic system
Supplied with transparent unbreakable poly carbonate jar of approximately 3.5 lt capacity
Sturdy aluminum lid clamp and sealing ring with built in safety features
Pressure valve with safety valve and two way pressure guage
Anaerobic indicator tablet
Anaerobic gas pack 3.5 lt
Petri plate carrier
2
14 Dissecting
microscope
Eye piece 10 x Adjustable mirror
2
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 490 -
SL. NO. NAME OF
EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
REQUIREMENTS /QTY(FOR ESI-PGIMSR, JOKA)
Unit Cost (to be filled in by tenderers)
Total Amount (in figure)
Buy back rate(in figures)
Final amount
after reducing buy
back rate
DEPARTMENT OF DENTAL
1. Chair Unit Specifications of dental Equipments /Instruments of newly Developed upcoming Dental Surgery
1. Chair Unit :
Electrically
operated
programmable
chair, both hand
and foot control
operation, over
hanging delivery
unit, spittoon with
auto flush, High
and low intensity
operating light,
motorized suction
(with auto drain)
X-ray viewer,
three way syringe,
zero backache
doctor’s stool.
01 each
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 491 -
a. Light cure unit : Light
emitting diode (LED)
b. Air rotar with Controlled
box : along with
(i) Air compressor:
Minimum 1.5 HP, Oil free
(ii) Air rotor Hand piece: 2 to 3 Lakhs RPM
2 Dental Electro
Surgery Unit
with multiple
tips
Dental Electro Surgery Unit with
multiple tips
01 pc
3 Automatic
dental X-ray
film developer
–IOPA (Intra
oral Peri
apical
radiograph)
automatic
processor
Automatic dental X-ray film
developer –IOPA (Intra oral Peri
apical radiograph) automatic
processor
01 pc
4 Lead apron
for use along
with dental X-
ray unit
Lead apron for use along with
dental X-ray unit
01 pc
5 Electric High
Speed Micro
Electric High Speed Micro motor of about 35000 RPM with reverse forward switch, foot
01 pc
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 492 -
motor control, with Both straight and contra angle Hand Piece.
6 Ultrasonic
Scalar
Ultrasonic Scalar : with four tips
02 pcs
SL. NO. NAME OF
EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
REQUIREMENTS /QTY(FOR ESI-PGIMSR, JOKA)
Unit Cost (to be filled in by tenderers)
Total Amount (in figure)
Buy back rate(in figures)
Final amount after reducing buy back rate
DEPARTMENT. OF RADIOLOGY ESI-PGIMSR, JOKA
1 500 MA X-
RAY
MACHINE
Technical specification of 500 MA X-RAY MACHINE
A 500 mA. Multipulse High frequency X-Ray machine for Radiography. RATINGS: 50KW High frequency X-Ray generator for radiography . Radiography Parameters: 35 to 125KVor150 KV Multi steps as many as possible Small Focus – 100 mA & 200 mA Large focus – 300mA, 400mA and 500mA mAs – 1.25 to 200 mAs in multiple steps as many as possible. Control: Floor or Wall mountable control panel, ON and OFF switches Automatic safety system to block unwanted exposure factors beyond tube ratings. Digital display of active KVP, mA and mAs. Hand switch with flexible long retractable cord. Compact durable soft touch keypad.
01 set(against condemnation)
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 493 -
Table or Vertical Bucky selection and table top radiography switch. Ready and X-Ray on switch with indications. Tube Unit: Rotating anode tube unit with dual focus x-ray tube insert. Anode Speed:- Minimum 2800 rpm. Focal spot:- Dual focus, Small focus:- 0.6mm to 1 mm Large focus:- 1.2mm to 2.00 mm Protection:- Totally thermal Protection. HV/HT cable compatible with X-ray tube. Motorized tube movement with all round tube angulation preferable Collimater: Manual light beam diaphragm. Tube Stand: Floor to ceiling stand and with counter balanced tube head 360 degree rotation (rotatable+/- 180 degree), tube rotation with column axis all round movement ( Longitudinal, Transversal, UP & Down), mounted on floor ceiling rails for convenient movement. Safety lock in case of wire shortage. Ceiling suspension tube preferable. Table: Motorized table with 6 way movement (table height adjustment) . Motorized bucky with grid ratio 8:1 (80 to 100 lines per inch). Stainless steel cassette tray with electromagnetic brakes. Stain free
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 494 -
laminated table top. Operating Voltage: 400-440 volt AC 50 HZ. Three Phase. Chest Stand: Motorized or manual Vertical Bucky Stand with counter balanced. Head to Toe Vertical travel (455mm to 1900mm). Electromagnetic locking method (lock released when switch is pressed). Also separate Cassette holder attachment with the Vertical Bucky Stand for direct exposures. Accessories:- Compression Band, Hand Grip & foot step. Unit should have the AERB approval.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 495 -
SL. NO. NAME OF
EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
REQUIREMENTS /QTY(FOR ESI-PGIMSR, JOKA)
Unit Cost (to be filled in by tenderers)
Total Amount (in figure)
Buy back rate(in figures)
Final amount after reducing buy back rate
DEPARTMENT OF PAEDIATRIC
1 NEONATAL
RESUSCITAT
ION UNIT
WITH
WARMER
NEONATAL RESUSCITATION UNIT WITH WARMER:- NEONATAL RESUSCITATION UNIT (MICRO-COMPUTER CONTROLLED) WITH WARMER SPECFICATION:-
a. Controlled Resuscitation
system. Oxygen
Administration facility,
Low Pressure suction and
warming with infrared
Radiant Heat Source.
b. Inline Manometer,
c. Oxygen Administration
Facility: i) Oxygen Flow
control facility with flow
meter (o to 15 lit/min).ii)
Oxygen Pressure
Adjustment valve, iii)
Humidifier Bottle, iv)
Facility to keep Oxygen
02 pcs (against condemnation)
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 496 -
cylinder, v) Connecting
hose for wall Outlet. vi)
Silicon Autocluvable
Resuscitation Bag with 00
and 01 size of Masks.
d. Slow Suction: This is a
specially designed
electrically operated slow
suction. Apart from
others, it is non-
motorized slow suction.
The suction pressure can
be adjusted as per
requirement.(0-110 mm
Hg.)
e. Servo Control System to
maintain an optimum skin
temperature.
f. Precise cradle
Temperature control.
g. Manual Warming Facility.
h. Stop Watch- additional
Facility provided to note
down timings during
monitoring various vital
signs of baby, e.g. temp.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 497 -
Heat rate, Respiration
Rate.
i. Reminder Timer.
j. Apgar Timer with Birth Time
Recorder.
j) a) Power Source: 230 +/-
10% volts. 50 Hz.
B) Control Method:
Micro-Computer
Controlled intelligent
proportionate Power
Control.
c) Heater Capacity: 600
Watts.
d) Light Source: 60 watts
bulb to examine babies.
e) Power Consumption:
850 watts.
m) Temperature Controller Specifications:-
V. Skin Mode Control: From Body Temperature to 38 C.
VI. Air Mode Control: From Room Temperature to 39 C.
VII. Resolution: 0.1 C.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 498 -
VIII. Accuracy: +/- 0.2 C. n) Alarms: (Audio visual with auto Reset facility) Alarm Condition
Message on Display
Skin + I.C.
HI
Skin - I.C.
LO
Air +1.5 C
HI
Air - 3 C
LO
Skin >38C
OVER
Air<39C OVER Skin/Air Sensor Failure Fail Heating system Failure HEAT OFF o) Safety Cutoff; When Skin Temperature exceeds 38C. When Cradle Temperature exceeds 39C. p) Power Failure Alarm: Audio –visual. q) Distance between Heater source and Baby: 88 (34.5)
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 499 -
r)Dimensions: Height X Width x Depth-cm (inch) 203 (80) X 63.5(25) X 100 (39.5) s) Baby Tray: Length 72 (28.3) x width 45 (17.7) t) Should have 1 drawer system attached with the equipment for storage facility. w) It should be in compliance with ISO 9001:2000. Should have Q.A. International Certification Limited.
2 DOUBLE SURFACE LED PHOTOTHERAPY
DOUBLE SURFACE LED PHOTOTHERAPY Specification:- Wide Effective Area.
Unit should have blue cool led light
source with wave length of 450-460
nm.
Long Life->20,000 Hrs.
No UV / IR Radiation.
No Heat Generation.
Low Power consumption.
Negligible Maintenance Cost.
Light Weight & Compact.
Height and Angle Adjustment
facility.
Mounted on Castor Wheels for Easy
Mobility.
Can be used in Conjunction with any
02 pcs(against condemnation)
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 500 -
make radiant Warmer.
Digital time Totalizer.
Irradiance> 60 u/W/cm2/nm.at 45
cm from the light source.
Wavelength 450-460 nm (peak 455
nm free of UV and IR radiation.
Height adjustable from 1198+/-20
mm to 1680+/-20 mm
UNDER SURFACE SOURCE
UNIT:
Unit should have blue cool led light
source with wave length of 450-460
nm.
Free of UV/IR radiation.
Light intensity is variable from 7-60
um/nm/cm2.at a distance of 45 cm.
Infant care Trolley in Stainless Steel
Specification:-
Mechanical Specification:-
Convenient working level with 6 mm
thick imported acrylic collapsible
side support, accessible from all
sides.
Acrylic Tray with Foam mattress. IV
Pole & Facility to take X-ray.
Head up /down facility.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 501 -
Stand with separate Infant care
trolley.
Mounted on 4” castor wheels for
easy mobility.
Infant care Trolley with transparent
acrylic bed and bubbles mattress for
baby. Fabrication in mild steel, baby
bed area in Stainless steel.
3 CPAP
MACHINE SPECIFCATION OF CPAP MACHINE SYSTEM: Valve based continuous flow CPAP and IPPR. Bubbler based bubble CPAP. DISPLAYS: Digital and Analog Display of CPAP pressure in CPAP Mode. Continuous Digital display of Delivered pressure in IPPR Mode. ALARMS; CPAP High and low
Alarms (Audio Visual)
PRESSURE GAUGE: -20 to 100 cm
H2O
GAS MIXNG: Air-Oxygen Mixer
using calibrated Rotameters.
AIR SOURCE: Inbuilt Air
Compressor (Optional) (20 to 90
PSI).
O2 SOURCE: Inlet for Oxygen Gas
(20 to 90 PSI).
POWER: 230V A.C. 50 Hz.
02 pcs(against condemnation)
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 502 -
Asccessories: Warmidifier,
Breathing Circuits(Disposable).
CPAP Interface, Nasal Prongs,
Dummy Test Lung.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 503 -
SL. NO. NAME OF
EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
REQUIREMENTS /QTY(FOR ESI-PGIMSR, JOKA)
Unit Cost (to be filled in by tenderers)
Total Amount (in figure)
Buy back rate(in figures)
Final amount after reducing buy back rate
Department of Biochemistry 1 SEMI
AUTOMATED
BIOCHEMISTRY
ANALYZER
SPECIFICATION FOR SEMI AUTOMATED BIOCHEMISTRY ANALYZER. I. Item : Semi Automated Biochemistry Analyzer with UPS 0.5 KVA. II. Analysis Option: a. Absorbance b. 1 point end linear & non linear. c. 2 point end linear & non linear. d. Rate linear & non linear. e. Immunoturbidimetry. OPTICAL SYSTEM III. Light Sources: Pre aligned Quartz halogen lamp. IV. Wave Length: Automatically Selectable narrow band interference quartz filter within wavelength of 340 -700 nm -- fixed seven or eight filters and two optional filters as per users choice. V. Measurement Time : Selectable.
01 pc
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 504 -
CUVETTE SYSTEM Cuvette : a. Flow cell Cuvette. b. External rectangular Cuvette. VII. Cuvette Temperature: Peltier control & programmable at 25˚C, 30˚C and 37˚C. VIII. Aspiration System: Motor driven pump. IX. Aspiration Volume: Programmable. X. Cuvette Blanking: Automatic. FUNCTIONS
XIII. Programmable Parameter: About 100 user defined test programs including routine biochemical parameters, enzymes, immunological markers, truly open system, selection through key- board. XIV. Calibration: Automatic against standard / calibration. XV. Quality control: a. 2 levels of control (at least) b. Levey - Jennings diagram. c. Manual entry of QC result.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 505 -
XVI. Memory Storage: a. Minimum 200 patients result. b. Calibration result. c. Quality control result for 01 month. XVII. Display: a. Graphic LCD. b. Display of reaction curve, absorbance, temperature. c. Display of result of real time. d. Graphical display of reaction time. e. Calibration curve graphical display. XVIII. Key board: a. Chemical and moisture prevented single touch alphanumeric
membrane key panel.
XIX. Printer: a. Built in thermal printer with full graphic facility. b. Parallel full page ink printer with formatting options. XX. Reporting format: a. Conventional b.SI unit(Optional/Interconvertible).
OPERATOR INTERFACE
SOFTWARE
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 506 -
XXI. Recalculation : Recalculation of result following modification of calibration, measurement timings and wavelength. XXII. Automatic Flagging: a. Absorbance and linearity cheek. b. Reagent stability. c. Substrate depletion. XXIII. Peripheral interfacing: a. Parallel ports for external printer , key- board and PC. Software PC Compatible. XXV .Power Cord : Indian Type 3-pin power cord locally available and replaceable . XXVI: Dust Cover : Washable dust-covers for main unit and key-board, etc. XXVII: Working Manual :
Working Manual by manufacturer in original
2 HbA1c
analyzer Specification for HbA1c analyzer Analytes HbA1c Principle HPLC Technology Sample Volume Less than or equal to 3ml. Sample loading Should load (50-60) samples
01 pc
ADDITIONAL
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 507 -
simultaneously capacity with continuous loading facility. Throughput < 8 minutes per sample Assay time Minimum Assay Time Assay Should be able to detect correct HbA1c values in the presence of commonly occurring abnormal haemoglobin variants. Primary tube sampling Facility should be there Calibrators External /Internal Control Control should provide External /Internal normal and abnormal control. Check facility Should be able to check all system parameters (cartridge, reagent, waste etc) CV < 3% Approvals Any two approval from the following CE / FDA /IFCC/NGSP approvals
3 Test Tube rack
_________________________ 20 pcs
4 Water Bath Rectangular
Water Bath Rectangular: Thermostatic control /; Boiling Water baths, with lids having 8-12 Holes with shaker Specification: Temperature range from ambient to 950C. Thermostatic control with an
01 pc
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 508 -
accuracy of +/- 10C. Double walled with inner wall of stainless steel and outer of MS powder coated, with lids of SS. The unit is provided with immersion type heaters to work on 220 V.A.C. The unit is supplied with indicating lamps. Main chord and Plug. Size of the inner chamber- 355x100mm; 1.5kw with shaker.
5 Colorimeter Specification:Photoelectric colorimeter with filter Digital Colorimeter - Highly Stable & accurate Ideal Clinical instruments for Blood & Chemical Analysis. Models Available ME 953 C 5 Filter ME 954 C 8 Filter ME 944 C 8 Filter With Battery Option. Range : 400 nm to 700 nm Filters 5 High Standard Filters, Accuracy ± 0.02 O.D., Reproducibility ± 0.01 O.D., Out Put Optical Density 0 to 1.99, Display 2 ½ Digit LED Display, Detector Selenium Photo Cell, Light Source 6.2 V 0.3 Amp. Tungston Filament Lamp, Min. Volume 1 µl., Power 230 V ± 10% 50 Hz AC, Size (LXBXH) 225 x 230 x 150 mm, Weight 4 kg. (Approx), Accessories Test Tubes 5 Nos, Light Source Bulb, Dust Cover, Instruction Manual.
4 Nos
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 509 -
SL. NO. NAME OF
EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
REQUIREMENTS /QTY(FOR ESI-PGIMSR, JOKA)
Unit Cost (to be filled in by tenderers)
Total Amount (in figure)
Buy back rate(in figures)
Final amount after reducing buy back
rate
DEPARTMENT OF PHARMACOLOGY
1. Cannula-made of corning glass (Arterial- hollow bulb with three arms, Venous–hollow glass tube- 4-5cm length & 3-4 mm diameter Syms cannula)
10 each
2. Four Unit isolated organ bath palmer F.67 For Internal Organs with stirring arrangements, made of transparent acrylic sheet, chemically welded to make leak proof. Complete with uprights, organ & oxygen tubes, capillary tubing, and frontal lever etc.Temperature by immersion heater and control by thermostat.
1
3. Dissection instruments and injection syringes as required Sets containing surgical standard scissors-2, curved scissors-2, pointed scissors-2, artery forceps-2, Mosquito artery forceps-2, scalpel handle-2, plain forceps-2, toothed forceps-2, small retractors-2, etc. Probes-2, hooks-2. To be supplied with proper cover and box.
1
4. X-blocks as required(Open and Closed) Machined from solid Brass rod, richly chromium plated to hold 9mm, 6mm and 12.5 mm rods
10 each
5. Hook grip rods as required- Should be suitable to fit in an X-block
25
6. Plain stand 25
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 510 -
7. Hair Aesthesiometer-Palmer W.290 1
8. Copper Trays (10”x8”x1”) 25
9. Microscopes ordinary - With fixed bright filed two lens condenser and iris diaphragm, heavy metal stand with triple nose piece. Coarse adjustment by rack and pinion and fine adjustment by precision grade slow motion arrangement in a beautiful storing cabinet - Total magnification 675 x Eye pieces H10x, H15x Objectives 10x, 45x (spring loaded)
2
10. Chemical Balance – Sensitive Balance beam scale, capacity: 120g/0.01g 220g/0.01g 320g/0.01g 1200g/0.01g 2200g/0.01g 3200g/0.01g. Power AC/DC with lithium battery. Display: LCD/LED with back light. Fan size: diameter 130mm.
1
11. Skin and Rectal Thermometer Barun -
1
12. Starling's or Heart Lever:-This lever is used to record the contraction of heart. The differences between this & other isotonic levers is that fulcrum lies at one end beyond the point of attachment. It consist of a frame carrying a light lever arm with holes and notches supported by a fine adjustable nickel silver spring attached to an adjustable hook.
2
13. Microscope with mechanical Stage and oil immersion
2
14. Frontal writing lever - This lever is designed in such a way that the
2
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 511 -
writing point rotates freely about its axle. This helps in reducing the tension between the smoked paper and the recording tip. The contraction are recorded as straight line
15. Fixit lever - the levers can be fixed to the spindle in the center p f which a vulcanite spindle on one of these pins lever fits, sliding through the frame is a rod carrying a spring that can be caused to bear against the roller its turning while other adjustment are made.
2
16. Colorimeters 1
17. Condon’s Drop Recorder-Palmer B-75
1
18. Jacquets graphic chronometer 1
19. Museum drugs specimen boxes rectangular, acrylic with cover. Sizes:- 9”x5”x4”(inch)& 6”x4”x3”(inch)
50 each
20. Microscope lamps - standard quality 2
21. Multimeter 1
22. Operating Table- JKA-172 : Suitable for Rabbits, Rats, Guinea Pigs and such like small animals. Top is of Stainless Steel and provided with adjustable head holder, tie-cleats, cut-back at the head-end with warming chambers.
1
23. Instrument Trolley (30”X18”X30”) 1
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 512 -
24. Instrument Trolley( 48”X24”X30”) 1
25. Manometer mercury glass U-tube (5 mm bore , two vertical limbs 30 mm height half filled with mercury (upto 250 mm of Hg)
2
26. Tracheal cannula metal ( z-shaped & y- shaped)
2 each
27. Bull dog clip 10
28. Rat holder- single u and ring pattern 38 mm with Universal joint
2
29. Mercury manometer –Meriam, All Manometers are fabricated from true-bore Borosilicate glass, floats are perfectly, lapped to eliminate leakage and are fitted with feather weight stainless steel capillary. Standard Mercury Mercury Manometers: Without stopcock, with adjustable scale.
2
30. Autoclave electric-small 1
31. Sterilizer electric size 12”x8”x6” 1
32. Stimulator electronic Arthus Thomas- Selectable pulse per second in different steps and pulse with, continuous variable volt in multiple of 1 and 10 with internal, external and single pulse mode
1
33. Flame Photometer 1
34. Manomet
ers
Mercury
All Manometers are
fabricated from true-bore
Borosilicate glass, floats are
perfectly, lapped to
eliminate leakage and are
fitted with feather weight
1
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 513 -
stainless steel capillary.
Standard Mercury
Manometers: Without
stopcock, with adjustable
scale.
35. Marey’s
Tambours Traditional (5cm to 10cm
diameter)
2
36. Physiogra
phs with
transduce
rs,
couples
and other
relevant
accessorie
s
(Earthing chord, chart
paper, ink pen, ink etc.)
Recording system,
amplifier, different couplers
like bio potential, EKG,
strainage, pulse
respiration, temperature
and isotonic couplers,
speed selection is easy and
instantaneous. Channel
width is 70 mm, Ink writing
pen is 120 mm in length to
minimize arc distortion.
Main Amplifier is fitted in
the console having switch
selectable sensitivity range
from 50 microvolt per cm to
100 milli volts per cm in
eleven steps as
50,100,200,500 mv/cm
and 1,2,5,10,20,50,100
mv/cm.
1
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 514 -
37. Kymograp
h
(students)
Electrical
independe
nt unit
Electrically driven
recording drums suitable for use by students for general experiments. Drive
mechanism consists of Constant speed electric motor and accurate Gear-
box contained in the base together with robust plate
clutch. Engagement of various gear ratios are effected by sliding the lever
into the slot marked with surface speed or by a knob
in separate models. Main cylinder and Stainless Steel spindle have been
standardized to make the same universal and interchangeable. Double
electric contact arms are clamped on the main
spindle and a stout double-contact block is fitted on top of the base. Gear ratios
i.e. 640 mm, 320 mm, 25mm, 12.5mm, 2.5mm,
1.2mm, 0.25mm, and 0.12mm per sec, are effected by sliding lever into
the slot marked with 8-surface speeds. Highly accurate speeds
Auto concentration curve (crc) mode and
normal mode.
23
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 515 -
Sturdy body
Corrosion resistant
Low power
consumption
Audio and visual alarm
Easy height
adjustment
Writing lever
Starling Heart Lever
Isometric Lever
Vibrating read,
variable interrupter Time marking – tuning fork
(100 hz), spring time
marker, electromagnetic
time marker
38. Tracheal
Canula
Metal
Made of Brass with
adjustable Air-vent.
Should be able to use for
endo-tracheal intubation of
big animals like Dog & Cats
4
39. Weighing-
Machine
for small
animals
like rats
and
guinea pig
Animal weighing scale;
Livestock scale: slip proof-
pan, waterproof-design,
with railing and door. High
legs for rough ground
2
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 516 -
40. Weighing-
Machine
for big
animals
like cats
and dogs
Animal weighing scale;
Livestock scale: slip proof-
pan, waterproof-design,
with railing and door. High
legs for rough ground
1
41. Apparatus
for
isolated
rabbit
intestine
A Cylindrical copper bath
with heating element
controlled by thermostat.
Complete unit with
uprights, glass inner vessel
and oxygen tube with
platinum tip frontal lever
from SS capillary tubing,
fitted on teak base board
25
42. Animal
trolley
with 12
cages
Fabricated from 1 square
hollow pipe and angel of
S.S. 304 quality material.
The racks are mounted on
four heavy duty 4, dia
castors for easy handling
and quiet transportation.
Complete with argon arc
joints and mirror finish.
Available to hold 24 animal
cages of size: 29X22X14
cms. (LXBXH). Rack size:
39X12X60 (LXBXH).
1
43. Dissectio
n
Sets containing surgical
standard scissors-2, curved
1
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 517 -
Instrume
nts scissors-2, pointed
scissors-2, artery forceps-2,
Mosquito artery forceps-2,
scalpel handle-2, plain
forceps-2, toothed forceps-
2, small retractors-2 etc.
Probes-2, hooks-2,. To be
supplied with proper cover
and box.
44. Frog
Boards ____________________ 25
45. Stop
watches
Digital – Digital Stop
Watch, Digital Stop Watch
is perfect for any laboratory
applications. The large
LED display, high
resolution enhances the
functionality in several of
situations. These are
available in two ranges as
per specification. Range
1:99:59:59 Hrs:Min:Sec.
Resolution: 1 sec (for range
1) Min:Sec:Milisec. Range
2:99:59:99 Hrs: Min: Sec
Resolution: 10milisec (for
range 2) Display: 6 digit
LED Display Alarm: Buzzer
after set time.
6
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 518 -
46. Chemical
balance-
ordinary
apothecar
y’s
Best quality with divided
doors show case, capacity
250 gms. Sensivity 1-2
mgm having all stone
agates fitted in open
graduated beam
1
47. Pill tiles ______________ 30
48. Porcelin
dishes
______________ 30
49. Pestle and
Morter
______________ 30
50. Iron
spatula
______________ 30
51. Horn
spatula
______________ 30
52. Galli
pot/oint
ment pot
______________ 30
53. Glass rods ______________ 100
54. Plethysm
ograph
assorted
High Resolution
Volume.
Resolution: 0.01 ml,
Accuracy+/-0.01ml. Easy to use pedal
switch. LCD Graphic
Display
1
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 519 -
55. Antihista
mine
chamber
with
manomet
er
Should be a complete
Histamine aerosol
apparatus having a acrylic
box with nebulizer
sphygmomanometer and
chloroform bellows for
assay of antihistamine
drugs on guinea-pig etc.
1
56. Actophoto
meter
(activity
cage)
The frame is equipped with
32 infrared photocells, 16
placed in axis X and 16
placed in axis Y. The
Photocell work at a
wavelength of 950 nm and
its information is
multiplexed at a rate of
40Hz. Hole board plate is
provided with 16 holes of
diameter and detection
depth. It should contain
incorporated electric facility
(variable) 0 to 100 volts for
activating rats and
indicating on meter.cm
1
57. Rotarod
Assembly Should have 5 chambers, 75 mm width each with a
rotating rod of 25mm diameter having speeds of 5.10 to 15.20 and 25 r.p.m.
Digital rpm indicator and digital time
1
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 520 -
counters.
Each counter runs from the beginning of
the test until the animal falls from the drum to the lane.
Electronic change of speed
from 4-120 rpm.
58 Electro
convulsio
meter
Should be able to use for
producing minimal and
supra minimal seizures
required for assaying of
anti-epileptic and
anticonvulsant drugs.
Should provide minimum
50Hz stimulus current
which can be adjusted
0.15mA to 330mA in steps,
with one pain corneal
electrode 4,6 or 8mm cups.
And one pair of ear clips
work on 220 AC. Should
contain electronic timer
device from 0.1 to 3
seconds in steps to control
the stimulus current and
LED indicator for duration
of stimulus.
1
59 Analgesio
meter
Thick pure aluminum
plate (12mm) provides a very high
1
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 521 -
temperature stability
and even surface distribution.
Plate temperature can
be held at a set point between above
ambient to 70 degree C (+/-0.2 degree C).
A built-in timer
activated by an external foot switch
allows the precise measurement of the
reaction time (0.1 sec resolution).
Remote foot-switch
controls the test start/stop allowing
rapid Hands-free experiments.
Provided with the
calibration certificate of the
temperature indicator.
60 Cooke’s
pole
climbing
apparatus
Should be having 2 (two)
chambers, an outer
chamber made of thick
plywood sheet with an
observation window and
inner animal chamber
made of clear acrylic sheet
with a brass bar at the
bottom. A built in shock of
200V AC, 50 Hz single
1
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 522 -
phase with min of 0.2mA
and is to be controlled by
min of 11 position solid
state timer up to 30
seconds. Should be having
output terminal for
kymograph recorder.
Animal dropping tray to be
provided to keep the
equipment clean.
61 Metabolic
cage
(diuretic
study)
Classic metabolic cages
with electronics to monitor
the receptacles for food and
water. Each may be
removed without disturbing
the animal. Optional
infrared beam arrays
(similar to those of the
Activity Cages) can be
mounted on either side of
the cage to monitor
coordinate activity and
rearing behavious. Each
cage is comprised of
interchangeable parts
which can be cleaned in a
standard vivarium wash
station.
6
62 Tablet
Disintegra
Hooper diameter of
minimum 2”. Should be
1
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 523 -
tion
machine
glass
tubing
(length of
6ft)
fitted with min 4 steel
hammers fixed to a disc
and Shaft being revolved at
the speed of 3000 RPM.
Rotation in vertical manner
is made by EHP Motor
which carries a specially
designed Basket to hold 6
nos. of Tablets/Capsules
under specified weight,
moving vertically in
temperature controlled
glass vessels/Beakers
placed on Hot Plate.
Having special type of
starter facility operatable
on 220 volts AC supply.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 524 -
SL. NO. NAME OF
EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
REQUIREMENTS /QTY(FOR ESI-PGIMSR, JOKA)
Unit Cost (to be filled in by tenderers)
Total Amount (in
figure)
Buy back rate(in figures)
Final amount
after reducing buy
back rate
DEPARTMENT OF ANESTHESIOLOGY (MANICKTALA)
1 Monitor for Continuous Measurement of Cardiac Function
A. Monitor for Continuous Measurement of Cardiac Function:
1. It should be arterial line based continuous
monitoring device for Cardiac output, Cardiac
Index, Systemic Vascular Resistance and
Stroke Volume.
2. It must be supplied with good quality display
device and ten Flotrac and necessary catheter
system.
3. The device should be compatible with Flotrac
sensor system
4. Necessary accessories should be supplied for
systemic vascular resistance measurement
5. It must be CE and/or FDA certified
01 pc
2 Monitor for continuous measurement of body tissue oxygenation and oxygen delivery status
B. Monitor for continuous measurement of body tissue oxygenation and oxygen delivery status:
1. It should be auto-calibration based arterial-
venous line based measuring device to
provide continuous measurement of ScVO2,
SvO2 , Extra vascular Lung water index and
Ejection fraction as well as End Diastolic
01 pc
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 525 -
volume of heart
2. The monitor should be supplied with 10 (ten)
relevant and related sensors for
measurement of hemodynamic variables
3. Suitable display and storage device for data
should be supplied
4. It should be CE and/or FDA certified
3 Instant Hand held blood pH and Lactate monitor
D. Instant Hand held blood pH and Lactate monitor:
1. Portable, cartridge based hand held device
capable of measuring blood pH, Lactate and
other variables such as Troponin, Ionised
Calcium, Prothrombine Time, Creatinine
Kinase-MB and Brain Natriuretic Peptide
2. Measurements should be quantitative in
nature
3. It should be supplied with wireless based
printer and electronic simulator for
calibration
4. It must be FDA and/or CE certified
01 pc
4 Lumber Puncture Simulator with Epidural block trainer
E. Lumber Puncture Simulator with Epidural block trainer:
1. The device should be a 3D image guided one
suitable for training of epidural needle
insertion
2. It should be based on real time motion
picture based capturing system with display
01 pc
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 526 -
of procedure on screen
3. The system should be capable of evaluation
of trainee’s performance
4. All relevant interfaces and accessories should
be supplied with the simulator
5. It must be FDA and/or CE certified
5 Spinal
Injection Trainer
F. Spinal Injection Trainer: 1. Mounted trainer should be able to be used
multiple times
2. It should be supplied with three sets of
accessories like fluid bags and simulators
3. One vertebrae must be visible for proper
identification of performance site
4. Trainee should be able to be guided by
perceptible tissue resistance while going
through different levels of tissues
5. It should be CE and/or FDA certified
01 pc
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 527 -
6 Central Venous Catheter Simulator
G. Central Venous Catheter Simulator: 1. Simulator should have life like anatomical
structures for identification of parts related
to central venous catheter insertion
2. It should allow trochar and guide wire
insertion for complete training
3. Device should be supplied with five
replaceable skin pads for each site of training
4. It should be supplied with all accessories like
artificial blood (two units), fluids, spare
vessels (two numbers), battery and other
relevant items
5. Facility to check correct position of catheter
placement should be there
6. It should be CE and/or FDA certified
01 pc
7 Cricotracheotomy trainer
H. Cricotracheotomy trainer: 1. It should be able to train routine as well as
percutaneous tracheotomy procedure
2. It should have easily palpable anatomical
land marks for identification of structures
3. Trainer must be steady in nature and should
be supplied with five sets of spare skin for
cricotracheotomy
4. It should be CE and/or FDA certified
01pc
8 Peripheral Nerve
I. Peripheral Nerve Stimulator/ Locator: 03 pcs
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 528 -
Stimulator/ Locator
1. The device should be able to locate nerves
percutaneously through electrical stimulation
based technique
2. It should be able to be used with monopolar
as well as bipolar based stimulation
technology
3. Current intensity preferably be between 0 to
60 mA and stimulating impulse upto 1ms
4. Should be able to measure and display actual
current passing through tissues
5. It must be supplied with insulated cannula ,
ten in number each for size 22, 24 & 25 G as
well as re-chargble battery and charger.
6. Needle quality should be able to give best
image under ultrasound guided procedures
7. It should be FDA and/or CE certified
9 Multi-
frequency based deep heat generator
J. Multi-frequency based deep heat generator: 1. Equipment should be multi-frequency
based dual outlet heat generator using long waves with a emission frequency range between 450 to 500 KHz
2. It must have coupling system of capacitive and resistive therapy system for heat generation at different depth of application area
3. Electrode pairs and handle tips with various diameters such as 30,50 and 70 mm
01 pc
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 529 -
must be supplied with the equipment
4. Power must be 100 W/KOhm or more
5. It should be CE and / or FDA certified
10 Airway management Trainer:
K. Airway management Trainer: 1. Trainer must have good quality land marks
of upper airway and pulmonary structures for proper identification during intubation training.
2. It should allow various techniques of intubations and different methods of airway related activities like application of suction, Sellick’s maneuver, observation of pupil and carotid pulse palpation
3. It should be supplied with two sets of artificial lungs
4. It should be FDA and/or CE certified
01 pc
11 Handheld instant hemoglobinometer with facility to measure Methaemoglobin
L. Handheld instant hemoglobinometer with facility to measure Methaemoglobin:
1. It should be able to be applied to patients of
all age groups and necessary
probes/accessories to be supplied in two in
numbers for each age group
2. It should work even in low perfusion status
and should be least interfered by electrical
disturbances
3. It should be able to provide pulse variability
index, blood hemoglobin and methemoglobin
level non-invasively on continuous as well as
01 pc
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 530 -
point of care basis
4. Perfusion index should be between o.o2 to
20%
5. Waveforms and/or digital display mode of
presentation
6. It should be FDA and/or CE certified
12 NUCLEO
PLASTY SYSTEM
1. It should work on principle of Co-
ablation
2. It should work through generation of
bipolar Radiofrequency without
requiring grounding
3. Terminal end temperature generation
must not be above 70 degree C
4. It should be capable of being used in
both Lumber and Cervical region
5. Supplied probe must have depth
penetration marks and stop lock for
safety and control.
6. It must be supplied with 17G (6 inch)
and 19G (3inch) accessory needles, 5
needles of each size. Respective size
Probe also to be supplied.
01 pc
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 531 -
SL. NO. NAME OF
EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
REQUIREMENTS /QTY(FOR ESI-PGIMSR, JOKA)
Unit Cost (to be filled in by tenderers)
Total Amount (in
figure)
Buy back rate(in figures)
Final amount
after reducing buy
back rate
Department of Forensic Medicine(For ESI-PGIMSR, JOKA)
1 Clinical
thermomet
er
Traditional type 2
2 Stykar
autopsy
saw with
accessories
Light weight equipment, 10 feet cord with hospital grade plug -should cut bone easily to minimise operator fatigue - Saw should be attached to HEPA bone dust collector.
2
SL. NO. NAME OF
EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
REQUIREMENTS /QTY(FOR ESI-PGIMSR, JOKA)
Unit Cost (to be filled in by tenderers)
Total Amount (in
figure)
Buy back rate(in figures)
Final amount
after reducing buy
back rate
Department of Community Medicine (For ESI-PGIMSR, JOKA)
1 Horrock’s
Apparatu
s
(Complet
e set with
chemicals
&
_____________________ 01 pc
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 532 -
Manual)
Dept. of Human Physiology
DEPARTMENT OF HUMAN PHYSIOLOGY SL. NO. NAME OF
EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
REQUIREMENTS /QTY(FOR ESI-PGIMSR, JOKA)
Unit Cost (to be filled in by
tenderers)
Total Amount (in
figure)
Buy back rate(in figures)
Final amount after reducing buy back rate
40 Audiometry Audiometry & Tympanometry in one instrument; potable - demo piece; special Audiometry window; MPANL (maximum permissible ambient noise level) specified internationally by standard institutes like OSHA and ANSI for proper acoustic treatment
1
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 533 -
Sheet II for Consumables & Accessories and CMC
Please refer to Sl.No. M of Annexure II (Special terms & conditions)
SL. NO.
NAME OF EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
Consumables & Accessories
Unit Cost For each
item
Expected life of the equipmen
t
CMC rates for Post-Warranty
next 5 consecutive years
DEPARTMENT OF ANESTHESIOLOGY ESIC-PGIMSR & MC & ESICH & ODC (EZ) JOKA 1 Anesthesia
Workstation (with multiparameter patient monitor)
1.Three gas (O2, N2O, Air) Anesthesia Gas Delivery Unit with the the following sub specifications:
a. The unit should have primary connection for central medical gas supply for O2, N2O and Air.
b. Provision for back up emergency supply through pin indexed O2 and N2O small cylinders.
c. Electronically controlled gas mixing and delivery system.
d. In case of O2 failure, the machine should automatically switch over to Air.
e. Audio visual alarm for O2 failure.
f. Accurate control of minimum 25% O2 in fresh gas (through sensitive oxygen ratio controller) up to flow of > 1 L/min, in
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 534 -
presence of N2O. At least 250 mL/min of O2 for low flow and minimal flow applications (fresh gas flow < 1 L/min).
g. Should be capable of accurate fresh gas delivery of up to 500 mL/min for minimal flow applications.
h. Ergonomically located integrated emergency O2 flush with self returning valve.
i. Should have single user-interface of at least 30 cm color display and electronic fresh gas doing for adult, child and neonate modes. The same user-interface should control and display all parameters including control of ventilator modes, display of pipeline and cylinder pressures, FiO2, ETCO2, airway pressures, tidal volume, minute ventilation, fresh gas flow, etc.
j. The user-interface should have configurable screen layouts for individual screen setups.
k. The machine should have fully automatic menu driven self test and user check list. In case of emergency machine startup, it should be possible to bypass the self test completely.
l. The system leak test should be done through the Y-piece of the circle system and should not require user interaction during the test.
m. O2 safety flow adjustable from 0 – 12 L/min,
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 535 -
through the vaporizer for emergency back up use.
n. Machine should also have an independent fresh gas outlet for connection to external circuit (Bain's circuit and Magill's circuit).
o. The machine should have a configurable nitrous-oxide-free operation (in case of necessity).
p. Fresh gas flow setting 50 mL/min to 12 L/min.
q. It should have the indicator to show the efficiency of fresh gas setting while used in low flow and minimal flow.
r. In the event of complete loss of external electric power and internal battery failure, it should be possible to manually ventilate the patient at 100% O2 and deliver anesthetic agent.
s. Major and critical components to be made of corrosion proof and durable metal alloy.
2.Integrated Anaesthesia Ventilator:
a. Electronically controlled, electrically driven ventilator should not require any driving gas or pneumatic power for its operation.
b. Ventilator should be suitable to ventilate adult, child and neonate without changing
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 536 -
ventilator bellows.
c. Ventilator should have fully automatic calculations and preset of patient specific ventilation settings based on ideal body weight of the patient.
d. Automatic breathing circuit compliance correction. Bellow should be enough light weight as not to offer any constant PEEP.
e. Modes of ventilation: Spontaneous ventilation, Manual ventilation, IPPV with plateau adjustment from 0 – 60 % of inspiratory time, PLV (pressure limited ventilation) with decelerating flow, Pressure controlled ventilation, SIMV-VCV, SIMV-PCV, Pressure Support (PS), PS with CPAP, PS with SIMV (CMV/PCV).
f. Should be upgradeable to Volume assured mode - autoflow – delivering set tidal volume at minimum airway pressure.
g. Peak inspiratory flow up to 150 LPM.
h. Tidal volume adjustments from 20 mL to 1400 mL (upgradeable to minimum 5 mL).
i. PEEP from 0 – 20 mbar, electronically adjustable.
j. Respiratory frequency 3 – 100 /min.
k. I:E ratio: 5:1 to I:99
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 537 -
l. Should have the capability to ventilate with atmospheric O2, in case of O2 and power failure.
3.Circle breathing system, Circle absorber: a. Compact circle breathing system suitable
for standard, low flow and minimal flow with minimum patient circuit volume including circle absorber (approx. 3 L, excluding reservoir bag) for fast response to change in fresh gas compensation.
b. Fresh gas decoupled / compensated breathing system for adult and children.
c. Integrated warmer in circle absorber for breathing gas conditioning and prevention of water condensation inside the circle system.
d. Breathing gas inlet and outlet of the circle system should be fitted with reusable (autoclavable) bacterial-viral filter.
e. Should have facility of gas sampling from the breathing system.
f. Manual APL on circle system valve with direct setting of release pressure.
g. Easy to fit and change circle absorber canister of about 1.5 L capacity.
4. Vaporizers: a. Temperature and pressure compensated
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 538 -
and flow interdependent vaporizer for Sevoflurane (1 such) and Isoflurane (1 such).
b. Vaporizer should have extended delivery range from 0 – 6%.
c. Vaporizers must have selective interlocking safety mechanism to prevent simultaneous operation of two vaporizers.
d. Should have transport lock and provide hermetic sealing of agent chamber during transport and storage.
e. The vaporizer should require no calibration in its life cycle.
5. Safety features and alarms: a. The machine should have adjustable alarm
limits for all the parameters with auto set alarm function.
b. The machine should have automatic display of MAC/MACx values and automatic activation of low agent alarm
c. Airway pressure low limit should automatically change with PEEP setting changes.
d. Continuous monitoring and display of tidal volume, airway pressure, ETCO2, FiO2 (paramagnetic O2 sensor), anesthetic agent
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 539 -
concentration (with automatic identification of anesthetic agent), lung compliance (VCV modes).
e. Graphic display of curves and loops with fast analysis of change in lung mechanics provided by simultaneous display of reference and real time loops.
f. Bar graph display of tidal volume (inspiratory and expiratory volume).
g. Trending for alarms and measured values with graphic trend display.
h. The machine should calculate agent compensation and agent uptake by patient on a case to case basis and display total fresh gas consumption in the electronic logbook of the machine.
6. Accessories to be provided: a. Should have at least 3 pc of RS232 connectivity
port to communicate with patient monitor or HIS for automatic data transfer.
b. Pin indexed yokes for O2 and N2O (one each)
c. The machine should have externally-fitted water and moisture trapping chamber (large capacity) fitted to the medical air pipeline inlet.
d. Trolley with drawer.
e. Floor mounting with durable caster wheels with
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 540 -
brake.
f. Writing surface.
g. Color coded and DISS coded pipeline connections and hoses for O2, N2O and Air.
h. Adult and Child breathing circuits (autoclavable).
i. Anesthetic face masks (silicone, latex free).
j. Water traps and sampling lines for gas analyzer.
k. Semi closed breathing system for adult and child (latex free).
l. Cylinder key (2 such) chained to the machine, near the cylinder yokes.
m. User manual.
7.Quality standard of the equipment, warranty and after sales service:
a. All the components of the of workstation (anesthesia gas delivery unit, vaporizer, ventilator, circle absorber and circle system), should be manufactured by the same agency to maintain uniformity of parts and efficient after sales service.
b. Authorization for standing by, terms of warranty & AMC & supply of spares for 7 years.
c. Physical demonstration of the quoted model is
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 541 -
mandatory.
d. Must have CE certification (EN 60601-2-13) w.r.t the essential requirement for safety and performance of the anesthesia workstation.
e. The comprehensive warranty will be 5 years (including all spares and labor) from the date of satisfactory installation of equipment. Also quote rates for comprehensive CMC (including all spares and labor) for 6th to 10th year, after expiry of warranty period. Cost of spares, accessories and consumables should also be quoted separately.
f. Within the warranty period, substitute working equipment of same model and make must be temporarily provided by the supplier free of cost to cover for any downtime exceeding consecutive 48 hours.
g. Facility for good after sale & service with trained engineers posted in Kolkata.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 542 -
2 Multi functional Surgical OT table ( C-arm fluoroscope compatible ) with electronic control
Multi functional Surgical OT table ( C-arm fluoroscope compatible ) with electronic control with the following specifications :
Should be a mobile universal operating table with Direct motor driven adjustment of height, lateral tilt, Trendelenburg/anti-Trendelenburg.
It should be 100% oil free. Should have a longitudinal adjustment of 250 mm. Should have pneumatic spring support for leg section
and back section. Adjustment of the column functions should be
electrically Motorised via cable remote control Should have additional operating panel with status
indicators for tabletop orientation on column. Should have built-in electronic interface to allow
remote diagnosis and software updates via modem. Should have maintenance-free battery, integrated in
the column, which can be charged via a separate charging cable that also serves for direct mains operations if needed.
Basic tabletop should consists of seat section and back section that can be adapted and extended to meet the requirements of all the surgical disciplines by combining it with other tabletop components.
The system should have Electrical and functional safety with Microprocessor and Sensor Technology Module.
Completely X-ray translucent tabletop.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 543 -
Pads should be integrally foamed, electrically conductive, soft and detachable, Velcro-free system for optimum hygiene and durability.
Should have stable running gear with 4 large double castors with a minimum diameter of 150 mm for easy manoeuvring.
Should have foot switch for brake. Should have H – shaped base providing a plenty of
space for the surgical team's feet. Tabletop frame, column cladding, side rails and
running gear frame should be made from disinfectant-resistant, easy to clean stainless steel.
It should be operated manually without the remote.
Column drive Height adjustment (without pads) Trendelenburg/Anti-Trenelenburg Tilt Pneumatic spring-assisted leg section up/down Standard leg section up/down° Back section up/down Longitudinal slide Patient weight
Electro-mechanical motor 700 mm – 1.120 mm 30°/35º +-25° +20°/-90° +-90° +85°/-30° 250 mm More than 225 Kg
The systems should be quoted with following General accessories :
1. Arm positioning support with radiolucent upper arm pad and roll- 2 nos.
2. Shoulder support-1 pair. 3. Anaesthesia Screen-1 nos. 4. Suspended arm strap set-2 nos 5. Infusion pole with 4 hooks-1 nos. 6. Body strap with locking Clamps-2 nos. 7. Lateral support height adjustable-2 nos. 8. Clamps-4 no. 9. Semi-circular pad-1 nos.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 544 -
The systems should be quoted with following Orthopaedic accessories :
1. Knee Arthroscopy adapter 2. Radial clamp 3. Leg holder 4. Side rail extension & adapter
5. The table should be USFDA, & CE and UL certified 6. It should be meeting international standards for
medical and electrical safety standards;
3 Cardiac Biomarker
Analyzer (Card-based
Quantitative Assay):
Technical Specifications of Cardiac Biomarker Analyzer (Card-based Quantitative Assay):
a. The card-based portable Cardiac Biomarker
Analyzer should be able to quantitatively
measure the following parameters: Troponin I,
BNP, CK-MB, Myoglobin, D-Dimer, using
Fluorescence Immunoassay Technology.
b. The analyzer must be small in dimension and
portable system.
c. The analyzer must be easy to operate, intuitive
user interface, requiring minimum technical
training of the operator.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 545 -
d. The unit should operate on AC adapter and also
on inbuilt Li-ion battery backup.
e. The sample requirement must be less than 300
micro liters for a given panel of test.
f. The single-use test card should be self contained
with all the reagents, sensors & calibrating
solutions required for the test.
g. The system should have inbuilt memory
capacity of at least 500 test results with date and
time.
h. Operating temperature range between 18 and 30
degree Celsius.
i. The system should be provided with an in-built
thermal printer.
j. The system should be able to interface with HIS
and LIS software.
k. Should have built in QC check facility for the
instrument.
l. Should be able to perform all the quantitative tests
of a single sample in less than 20 minutes.
m. Should be US FDA certified and CE marked for
all the main equipment as well as the accessories
and kits used.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 546 -
4 The Endoscope Drying Cabinet
The Endoscope Drying Cabinet should have the following technical specifications:
1. Approximate dimensions: Width X Depth x Height = 1280 mm x 470 mm x 2150 mm.
2. Approximate depth of chamber = 370 mm; approximate volume of chamber 0.6 cubic meters.
3. Number of endoscope positions: at least 6 (six).
4. Drying time = 120 minutes or less. 5. Storage time = 160 hours or more. 6. Power supply: 230V x 0.9 A, 50 Hz, AC. 7. Power consumption should be less than 150
watts. 8. Air supply: compressed air pressurized
medical grade dry air, internal pressure 3 – 8 bar, dew point = - 43 degree C.
9. Internal ventilator 30 cubic meter/h (approximately).
10. Hepa filter (filter class minimum 7) with 0.3micrometer/9997 DOP; HEPA filter resistance = 200 Pa
11. Cabinet doors must be lockable, with user access control to prevent unauthorized access.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 547 -
5 ELECTRO SURGICAL UNIT
TECHNICAL SPECIFICATION FOR ELECTRO SURGICAL UNIT
The Micro-processor based isolated Electro Surgical Unit should be compatible with Argon Coagulator system, designed for all kind of General Surgeries with both monopolarand bipolar modes. The following features are required 1. The unit should be entirely microprocessor based. 2. Machine should have LED displays. 3. “Highest power efficiency rating” - have to be
within the range more than 97 %. 4. Real time tissue impedance monitoring technology
to deliver the selected power perfectly into a wide range of tissue types reducing thermal spread, RF interference and Neuro muscular stimulation and spark using feedback technology of sensing tissue types at a rate as high as 200 times in a second.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 548 -
5. Return Electrode Contact Quality Monitoring (REM) system with Adaptive REM facility.
6. The Machine should work with disposable dual plate patient's return electrode with good quality of polyhesive adhesive get.
7. Patients' return electrode should be available in three sizes, for adults, paediatric and neonatals.
8. The patient return electrode should be all disposable type.
9. The service provider of the unit should have their working office/workshop in Kolkata.
10. Facilitating two surgeons at a time using one machine in the same surgery.
11. Numerical Error alarming system should be inbuilt. 12. With a single button on the machine, previous
power setting can be recalled. 13. Should be type CF Equipment (IEC 601 – 1 & IEC
601-2-2) defibrillator proof. 14. Unit should be US FDA and CE certified 15. Facilitating under water procedures
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 549 -
16. Unit should have “Spray” mode with Highest Crest Factor (in the range of 7-9) - (*Crest Factor as an indicator of a waveform's ability to coagulate bleeders without cutting effect.)
17. There should be option of changing the crest factor from low to high value with a single button.
18. There should be sufficient Coag modes present for all applications ( Preferably 4 coag modes)
19. Must be compatible with smoke Evacuator system, Argon Plasma Coagulator system and CUSA
Input power source; Operating Range : 170-260 VAC Line Frequency : 50-60 Hz Minimum High Frequency Leakage Bipolar Less than 60 mA Monopolar Less than 150 mA OUTPUT CHARACTERISTICS
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 550 -
Highest Powers should be in the below ranges
Precise – 70 Watts Standard – 70 Watts Macro – 70 Watts
Low – 300 Watts Pure – 300 Watts Blend – 200 Watts
Deisccate – 120 Flug. High Crest Factor – 120 Flug, Low Crest Factor-120 Spray - 120
OUTPUT WAVEFORMS :-
BIPOLAR: 470 Khz sinusoid
Monopolar Cutting Pure: 393 kHz sinusoid
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 551 -
Blend: 393 kHz bursts of sinusoid recurring of 27 Khz intervals. 50% duty cycle envelope
Monopolar Coagulation: Dessication:- Low 1: 240 +-40 Khz sinusoid recurring at 39 Khz. 8% duty cycle Low 2: 393 kHz sinusoid Low 3: 393 kHz sinusoid Fulguration:- High 1: 470+-40KHz damped sinusoidal burstswith a repetition frequency of 57 Khz High 2: 470+-40KHz damped sinusoidal burstswith a repetition frequency of 30 Khz Spray:- 390 Khz damped sinusoidal bursts with a randomised repetition centered at 28 kHz. Frequency include 21 Khz ‹ f ‹ 35 KHz Output Is further modulated by a random 250 Hz envelope with a variable duty cycle Output power changes by ‹ 15% or 5 Watts, which ever is greater, as the line voltage varies from 90 – 135 volts and 186 – 264 volts (into a 300 ohm load)
6 Forced air warmer
Specifications for Forced air warmer 1. Forced air warmer for patient warming
with adjustable automatic temperature control between 32 - 44 degree Celsius, in steps of 4 degree Celsius; with outlet hose temperature monitoring system. The warmer unit should have the system of securely mounting on any IV pole or bed rail. Non-tipping mounting pole, with caster wheels, and wire basket to be provided with each warmer unit.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 552 -
7 Forced-air
(convective)
patient-warming
system
Forced-air (convective) patient-warming system Technical Specifications:
a. Servo-controlled forced–air (convective) patient
warming system, using thermistors placed at hose end.
b. Hose end temperature range must be
adjustable from 36°C to 44°C by 4°C
increments (±1°C).
c. Relative Average Noise Level at 1000 Hz (front
and back) must be less than 45 dBA. d. Air Flow: 55 to 86 cubic feet/min.
e. Must have air filtration system with 0.2 micron
filters.
f. Operating voltage 230V, 50Hz AC.
g. The components and accessories of the convective patient warmer must conform to the
following Quality Standards: Product Safety (EN
60601-1, UL 2601-1); Convective Warming
Blanket Flammability (NFPA 702, 16 CFR
1610); EMC (EN 60601-1-2, FCC 47 CFR Part
15, Class B); Enclosure Protection (IEC 60529 IP Code: IPX1); Convective Warmers (ASTM
F2196-02); Drop Test Compliance (EN 60601-
1), and must have the US-FDA 510(k)
certification.
8 Portable USG
equipment for
vascular imaging and regional
anesthesia
Portable USG equipment for vascular imaging and
regional anesthesia Technical Specifications: a) Portable ultrasound machine with multi-frequency
broadband linear array, curved array and sector array
transducers used for accurate localization of peripheral
nerves, nerve plexuses, and epidural space during
regional anesthesia and also localization of peripheral and central veins and arteries for vascular access.
b) Must have US FDA 510(k) certification for the main
equipment and accessories.
c) Must have the following Internationally approved
safety features & components:
Electromechanical safety standards: EN 60601-1:1997; EN 60601-1-1:2001; EN 60601-2-37:2001 +
Amendment A1:2005; CAN/CSA C22.2, No. 601.1-
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 553 -
M90; CEI/IEC 61157:1992; UL 60601-1
EMC Standards: EN 60601-1-2:2007; CISPR11:2004
DICOM standard: NEMA PS 3.15:2000-Part 15
9 Ambulatory PCA pump
Ambulatory PCA pump Technical Specifications:
a) Ambulatory microprocessor controlled
programmable patient controlled analgesia (PCA)
pump.
b) Must have the following CE approved safety
features & components: IEC/EN 60601-1, Class IIIb (according to Directive 93/42 EEC; EMC: IEC/EN
60601-1-2/ 60601-2-24.
c) Must have US FDA 510(k) certification for the main
equipment and accessories.
10 Syringe infusion pump
Syringe infusion pump Technical Specifications:
a) Syringe infusion pump for continuous precise
delivery of intravenous drug infusions.
b) Must have the following CE approved safety
features & components: IEC/EN 60601-1, Class IIIb
(according to Directive 93/42 EEC; EMC: IEC/EN 60601-1-2/ 60601-2-24.
11 Volumetric
(piston) infusion pump
Volumetric (piston) infusion pump Technical Specifications: a) Volumetric infusion pump (piston mechanism) for
continuous accurate fluid infusions, with ultrasonic,
adjustable air bubble sensor.
b) Must have inbuilt re-chargable Li-ion battery of at
least 1600 mA. c) Must have the following CE approved safety features
& components: ISO 9001:2000 AND ISO 13485:2003
(in accordance with the Medical Devices Directive
93/42/EEC; Design Standard: EN 60601-1 (safety)
and IEC 601-1-2 (EMC); Electrical Safety Stabdards:
EN 60601-1, IEC 60601-2-24, IEC 60601-1-4.
12 Single chamber
temporary cardiac
pacemaker (VVI,
VOO, AAI, and AOO
modes)
Single chamber temporary cardiac pacemaker (VVI,
VOO, AAI, and AOO modes) Technical Specifications:
a. Single chamber temporary cardiac pacemaker
with VVI, VOO, AAI, and AOO modes.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 554 -
b. VVI (AAI) modes must be selectable with and
without acoustic signal.
c. Pacing Rate: 30 to 180 ppm
d. Atrial Overdrive Pacing (RAP): 2X (60 to 360 ppm); 4X (120 to 720 ppm)
e. Output Amplitude: 0.3 to 12 V ± 5%
f. Pulse Width: 0.75 ms ± 0.02 ms
g. Sensitivity: 1 to 20 mV, Asynchronous.
h. Refractory period: 250 ms
i. Battery Type: Should accept Standard 9 V, Alkaline or Lithium batteries. Should have
economically long battery lifetime of up to 30
days of operation with a single 9 V Alkaline
battery.
j. Weight must be less than 200g (with battery) k. Connector Compatibility: Must accept standard
connector pins with diameters ranging from 0.9
to 2.0 mm. Must accept all standard myocardial
heart wires and temporary pacing leads for
direct connection or through temporary
extension cable. l. Protective cover must be present to safeguard
against accidental changes to settings.
m. Audible warning tone for low battery, including
low battery indicator must be present.
n. Pacing run-away protection feature must be present.
o. Arm Strap must be supplied.
p. The equipment must conform to ISO and CE
stands for safety of operation and quality.
13 Pressure Infuser
Bag (Reusable): 1
L & 0.5 L sizes
Pressure Infuser Bag (Reusable): 1 L & 0.5 L sizes Technical Specifications:
a. Heavy duty pressure cuff specially designed for rapid infusion/pressurized infusion of fluids.
b. Suitable for pressure up to 400 mm of Hg.
c. Transparent material to enhance the visibility of
the fluid transfer/flow.
d. Easy to use, hook-and-loop fastener enables easy replacement of Infusion bag without
removal of Pressure Cuff from drip stand.
e. Instant venting through the three way stop cock
enables quick deflation of the cuff.
f. Clear & precise pressure gauge facilitates rapid &
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 555 -
reliable pressure control.
g. Squeeze bulb is supple, faster & easier to
operate for fast inflation.
h. Must conform to BIS / CE safety standards.
14 Percutaneous dilatation
tracheostomy kit
(incorporating the
Seldinger
technique and
reusable “Guidewire
Dilating Forceps”)
Percutaneous dilatation tracheostomy kit (incorporating the Seldinger technique and reusable
“Guidewire Dilating Forceps”) Technical Specifications:
a) Percutaneous dilatation tracheostomy kit
(incorporating the Seldinger technique and reusable
“Guidewire Dilating Forceps”) with 7.0 mm ID cuffed tracheostomy tube.
b) Must have US-FDA and CE approved safety features
& components.
15 Multimodal ICU
Ventilator
Multimodal ICU Ventilator Technical Specifications:
a) Electric piston / turbine driven multimodal ICU ventilator (Spont-PS, AC-VCV, AC-PCV, SIMV-VCV,
SIMV-PSV, Adaptive-BiPAP, PEEP, invasive and non-
invasive ventilation modes for adult & pediatric
patients.
b) Must conform to the following Standards & Safety Requirements: ISO 10651-2, ISO 10651-3, ASTM
F1100-90, IEC 60601-1, IEC 60601-1-2, IEC 60601-2-
12, UL 94 HB or better.
16 Portable multi-
parameter patient
monitor
Portable multi-parameter patient monitor Technical Specifications:
a) Portable multi-parameter patient monitor with SpO2, ECG, NIBP, and Temperature, with wireless
LAN, and 3 h battery backup each mounted on
adjustable wall bracket.
b) Two (2) sets of standard accessories for ECG, SpO2
(adult, pediatric, neonate), NIBP cuff & hose (adult, pediatric, neonate), temperature probe,
c) Must have US-FDA and CE approved safety features
& components.
17 Patient-transfer
slide-board
Patient-transfer slide-board Technical Specifications:
a) Patient-transfer slide-board for Operation Theater, (approx. dimensions: 1500 mm x 550 mm, L x W) made
of lightweight & resilient radiolucent material of high
impact tolerance, good anti-static properties,
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 556 -
maintenance-free and easy to clean.
b) Must be CE approved.
18 Adult half body
basic CPR (BLS)
training Manikin
Adult half body basic CPR (BLS) training Manikin Technical Specifications:
a) Half-body CPR (BLS) Training Manikin with conforming to AHA (American Heart Association) 2015
guideline for CPR and ECC.
b) Must be able to support the performance of opening
the airway, artificial breathing and external cardiac
compression.
c) While performing artificial aspiration, observable chest rise must be present.
d) External chest compression: feedback for correct
compression dept (5-6 cm), correct compression site
with prompt correct buzzing sound.
e) Excessive compression, prompt alarming buzzing sound must be present.
f) Operation frequency: >100/min, with “tick” sound
g) Power: battery
19 Adult advanced
CPR (ACLS)
training Manikin
with monitor &
printer
Adult advanced CPR (ACLS) training Manikin with
monitor & printer: Technical Specifications:
a) Must combine the standards of the 2015 ACC-AHA
& ECC guidelines, with up-gradability to future revised
guidelines. b) Guide standards of implementation of standards:
the American Heart Association (AHA), 2015
International cardiopulmonary resuscitation (CPR) &
Emergency Cardiovascular Care (ECC).
c) Anatomical features must be clear, feel real, unified color, realistic shape, and aesthetic appearance.
d) Must simulate vital signs: the initial state, analog
mydriasis, the carotid artery pulsation.
e) After successful treatment, the simulated human
pupil must return to normal.
f) Must have feature of judging consciousness,
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 557 -
emergency call, pulse check, check breathing, remove
foreign bodies of five operations.
g) Artificial respiration and heart functions.
h) Airway open manuvers. I) Modes of operations: CPR training, simulation,
assessment and actual assessment.
j) CPR display functions:Electronically monitored
airway open and press parts. Artificial respiration and
external cardiac compressions and the correct number
and the number of errors. 220V power supply.
k) Recording & Printer Features: Choice of operating
simultaneously print operation and choice of operation
after the resuscitation.
The printed transcript must cover covers the mode of operation, the sense of judgment, rescue breathing,
pulse check, check breathing, remove foreign bodies,
each cycle of operation the number of compressions
and blowing, pressing the right / wrong number, press
the wrong reasons and frequency, inflatable the right /
wrong reasons and frequency of blowing the wrong reasons, set the time, operating time and the
evaluation.
RF remote control functions:
l) RF remote control: The instructor can start by
remote control CPR, stop, pupillary changes, with or without pulse, printers, and other functions. Can also
sense of judgment, emergency call, pulse check, check
breathing, remove foreign bodies to be recorded.
m) The material characteristics: face skin, neck skin,
chest skin, hair from high quality, and durable
material and should not distort while decontamination and disassembly.
20 Child advanced CPR (ACLS)
training Manikin
with monitor &
printer:
Child advanced CPR (ACLS) training Manikin with monitor & printer: Technical Specifications:
a) Must combine the standards of the 2015 ACC-AHA
& ECC guidelines, with up-gradability to future revised
guidelines. b) Guide standards of implementation of standards:
the American Heart Association (AHA), 2015
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 558 -
International cardiopulmonary resuscitation (CPR) &
Emergency Cardiovascular Care (ECC).
c) Anatomical features must be clear, feel real, unified
color, realistic shape, and aesthetic appearance. d) Must simulate vital signs: the initial state, analog
mydriasis, the carotid artery pulsation.
e) After successful treatment, the simulated human
pupil must return to normal.
f) Must have feature of judging consciousness,
emergency call, pulse check, check breathing, remove foreign bodies of five operations.
g) Artificial respiration and heart functions.
h) Airway open manuvers.
I) Modes of operations: CPR training, simulation,
assessment and actual assessment. j) CPR display functions:Electronically monitored
airway open and press parts. Artificial respiration and
external cardiac compressions and the correct number
and the number of errors.
220V power supply.
k) Recording & Printer Features: Choice of operating simultaneously print operation and choice of operation
after the resuscitation.
The printed transcript must cover covers the mode of
operation, the sense of judgment, rescue breathing,
pulse check, check breathing, remove foreign bodies, each cycle of operation the number of compressions
and blowing, pressing the right / wrong number, press
the wrong reasons and frequency, inflatable the right /
wrong reasons and frequency of blowing the wrong
reasons, set the time, operating time and the
evaluation. RF remote control functions:
l) RF remote control: The instructor can start by
remote control CPR, stop, pupillary changes, with or
without pulse, printers, and other functions. Can also
sense of judgment, emergency call, pulse check, check breathing, remove foreign bodies to be recorded.
m) The material characteristics: face skin, neck skin,
chest skin, hair from high quality, and durable
material and should not distort while decontamination
and disassembly.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 559 -
SL. NO. NAME OF EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
Consumables & Accessories
Unit Cost For each
item
Expected life of the
equipment
CMC rates for Post-Warranty
next 5 consecutiv
e years
DEPARTMENT. OF OBST. & GYNAE. ESI-PGIMSR, JOKA 1 Cardiotocographi
c fetal monitor
with Maternal
Monitor
Specification of Cardiotocographic fetal monitor
with Maternal Monitor.
Standard size colour TFT screen monitor for display
of wave forms and digital
Automatic fetal movement detection facility in wave
forms.
Standard twin pregnancy monitoring system
Support for external thermal printer or ink jet printer
Built- in rechargeable battery and AC/DC power
supply.
Built-in network capability.
24 hours monitoring, data storage and reload
capacity.
Fetal heart acceleration and deceleration
measurement ability
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 560 -
Fetal heart base line beat to beat variation and
acceleration, deceleration analysis capability.
Printing functions with paper for documentation.
Automatic monitoring mode and convenient operation
by manual/digital keys and rotary knob.
Light and auto-alarm ability complying with
international standard.
OPTIONAL (Additional Specification):
Maternal monitoring parameters may be present in
addition to fetal monitoring system.
ECG
SPO2
NIBP
Respiratory rate
Temperature
Other parameters
2 Delivery Bed Specifications
Delivery Bed:
Overall size: 1880L X 900w X600-800H mm.
Tubular Frame work mounted on 125 mm dia
castor two with breaks.
Three Section top made of MS pipe with fixed
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 561 -
cushioned mattress.
Height Adjustment preferably Hydraulic
height adjustment & back section
adjustment through electric actuator
system.
Trendlenburg/ Reverse Trendlenburg
Positions through pneumatic pump.
Leg end section can slide under the main
section. Wheel lock system must be
present.
Provided with a pair of upholstery lithonomy
position.
SS telescopic IV Rod.
Detachable SS Tray.
3 MICROSCOPE MICROSCOPE SPECIFICATIONS
Optical System: UIS2 (Universal infinity-corrected) optical system
Illumination:
Built-in transmitted Koehler illuminator 6V/30W halogen bulb 100-120V/220-240V ~ 0.85/0.45A 50/60Hz
Focusing:
Stage height movement by roller guide (rack and pinion) Stroke per rotation: 36.8mm Full stroke range: 25mm Upper limit stopper Tension adjustment on coarse focus adjustment knob
Revolving Nosepiece: Fixed quadruple nosepiece with inward tilt
Observation Tube: Type: U-CBI30-2, Binocular
U-CTR30-2, Trinocular
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 562 -
Field Number: 20 20
Tube inclination:
Interpupillary distance adjustment range:
30°
48mm-75mm
30°
48mm-75mm
Light path selector: None
None (Bi 50%, Video/Photo 50% fixed)
Stage:
Size: 188mm(W) x 134mm(D)
Movement range: 76mm X-direction x 50mm Y-direction
Specimen holder: Double slide holder
Rubber grip: Equipped as standard
Condenser:
Type: Abbe condenser
NA: 1.25 with oil immersion
Aperture in iris: Built-in
Dimensions & Weight:
233mm(W) x 432mm(H) x 367.5mm(D), approximately 8.5kg (approx. 18.7lbs.)
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 563 -
4 Portable
Ultrasound
Machine
Specifications of Portable Ultrasound Machine
1. The unit should be compact, light weight,
portable,sturdy and resistant to break & damage..
2. It should be suitable for vascular access (CVC
placement,PICC) Nerve blocks(Lower as well as
upper extremity),E-FAST examination, AAA
Exam, small parts, applications in adults and
paed. patients and also suitable for
echocardiography & interventions. Multiple
preloaded applications presets should be available
for the above.
3. The unit must have real time compound
imaging for improved contrast resolution &
eliminating ultrasound artifacts to achieve
optimum image quality.
4. The unit must have automatic gain adjustment
for B mode imaging
5. Scanning depth must be available up to 35 cm.
6. System should support transducer technologies
like convex, linear and phased array.
7. Imaging modes of real time 2D, color Doppler,
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 564 -
Pulsed wave Doppler, Continuous wave Doppler
and Power Doppler must be available in all
probes.
8. Simultaneous connectivity of at least 2 probes.
9. System must have fast start up to scanning in
less than 60 seconds as essential in critical and
emergency situation in ICU, emergency & OT.
10. Cine memory on all modes
11. DICOM ready system with facility to print
along with printer, store, ready to connect to
PACS
12. Flat LCD/TFT monitor of at least 10” with
flicker free image
13. Alphanumeric soft keys keyboard with easy
access scans controls, facility to sanitize the
system keyboard
14. to avoid cross contamination must be
available
15. Onboard storage of at least 10,000 images
,USB port for connectivity to computer
16. Should be able to operate both on AC and
battery. Battery pack should be self recharging
and should last at least for 2 hours when fully
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 565 -
charged.
17. Transducers to be provide as standard.
High frequency Linear transducer 6-12 MHz
with 60mm size for vascular access, small parts,
vascular, muscuskeltal
interscalene,Supraclavicular,Axillary,Musculocuta
neus,Popliteal,Saphenous.
Higher frequency will be preferred.
Convex transducer 2-5 MHz for deep nerve
access specially Celiac,Sciatic
nerve,Epidural,Subgluteal & abdominal
applications.
Broad band phased array transducer,1-5 MHz
for accessing the cardiac function & other related
application.
Needle guide must be supplied for Linear &
Convex probes along with 20 compatible needles
with the unit.
18. System should be supplied with trolley.
19. Valid US FDA/CE(European)/BIS
certification.
5 Digital Fetal
Doppler
Specifications for digital Fetal Doppler:
Fetal doppler CE approved, with blue
blacklight for dark sight
Easy operation for everyone, over 10 years
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 566 -
quality satisfaction
Tm-100B Fetal Doppler CE Approved
Ultrasound frequency : 2.5+-0.25Mhz
Ultrasound output power : 10mW/cmDC
Power supply:9.6V rechargeable battery
Working environment temperature : 10-40
6 COLPOSCOPE
TECHNICAL SPECIFICATIONS COLPOSCOPE
1. Should be a basic model with binocular tubes
with inter papillary adjustment and vertical stand.
2. Should have a working range with fine focus of
minimum 40mm.
3. Should have a 12.5x or 13.5x or 15x eye piece.
4. Should have a standard objective of working
distance between 250 to 300mm.
5. The vertical stand should have at least 4
wheels and at least 2 of them should have
breaking facility.
6. The vertical joint should be rotatable and
should have vertical height adjustment.
7. The head should be tiltable and should have
positioning handle.
8. Should use a halogen light source with coaxial
illumination.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 567 -
SL.
NO. NAME OF EQUIPMENT
& INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
Consumables & Accessories
Unit Cost For each
item
Expected life of the equipmen
t
CMC rates for Post-Warranty
next 5 consecutive years
DEPARTMENT OF EYE 1 C-mount , camera,
TV Attachment for video
C-mount
Single Chip camera (Ex-stock)
Color TV (Ex-stock)
2 SLIT LAMP WITH MOTORIZED STAND
SLIT LAMP WITH MOTORIZED STAND Binocular Microscope Eye piece 10x16×25×40× Step magnification
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 568 -
8D compensation of ametropia Interpupilary adjustment : 50-80 mm Slit width: minimum 0-8 mm continuously adjustable Slit length: continuous from 8 mm to 1 mm minimum Slit angle : 0-180 degree continuous Slit Inclination: 5,10, 15,20 degree Filters: Blue, Red free , Grey & heat absorbing Bulb: Tungsten bulb Imaging facility
3 VISUAL FIELD
RECORDING
INSTRUMENT
TECHNICAL SPECIFICATION FOR VISUAL FIELD RECORDING INSTRUMENT
( PERIMETER SYSTEM) Specification:
Stimulus intensity 0.03 -10,000 Asb Stimulus Duration 0.1 – 9.98 secs Stimulus Wavelength Broadband visible light Maximum Bowl illumination 31.5 ASB GPA Software Testing features: Threshold Testing Library Central Field Testing Patterns: 30-2, 24-2, 10-2 Macula Peripheral Field Test Patterns: 60-4, Nasal Step Screening Test Library Central Field Patterns: C-40, C-64, C-76, C-80, C-Armaly Peripheral Field Test Patterns: P-60, DD-81, FF-120, FF-135, FF-246, FF-Armaly, Nasal Step Specialty Test Library Esterman monocular
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 569 -
Esterman binocular Superior 36 Superior 64 Stimulous / background color White on white User defined test storage User features: Fixation Monitoring Heiji Krakau blind spot monitor Video eye monitor Trial lens Holder Remote video eye monitoring capability Operator interface Help Menu Touch screen on CRT Motorized chin rest Printer Printex Thermal printer, table mounted Patient data input Name, Birth Date, ID, Trial Lens, VA, Pupil size IOP, C/D ratio, Diagnosis Code, Procedure Code, Comments
4 Flash Autoclave 1. Size: Minimum 20 Litre 2. Reservoir: 3 to 5 Litre 3. Tray: Minimum 3 in number 4. Air removal: vacuum pump 5. Total sterilization with vacuum dry: shouldn’t
take more than 30 min. 6. Exposure temperature: 121⁰ C/ 134⁰ C 7. Fully automatic, microprocessor controlled 8. Attached printer 9. European ‘B’ class certified
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 570 -
5 PHACOEMULSIFI
ER Based on peristaltic pump technology.
o Crystal phaco hand piece. o Multimode phaco (Continuous /
pulse / burst). o Occlusion mode phaco. o Cool microincision phaco. o In phaco mode.
Vaccum level 0-500 mm Hg
Pump flow rate 0-50cc
o Continuous irrigation facility. o Bipolar diathermy with selectable
power. o High speed anterior segment
vitrectomy preferably with electric cutter.
o Foot switch control for irrigation, I/A, phaco.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 571 -
SL. NO.
NAME OF EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
Consumables & Accessories
Unit Cost For each
item
Expected life of
the equipme
nt
CMC rates for
Post-Warranty next 5 consecutive years
DEPARTMENT OF ANATOMY REQUIREMENT OF LIST OF BONES: Technical Specifications: 1 Full skeleton 2 Vertebral column 3 Vertebral column with pelvis 4 Articulated pelvis 5 Full Skeleton Loose bones 6 Full Skull with mandible attached 7 Full Skull without mandible 8 Cut section of skull
SL. NO.
NAME OF EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
Consumables & Accessories
Unit Cost For each
item
Expected life of the equipmen
t
CMC rates for Post-Warranty
next 5 consecutive years
REQUIREMENT OF ITEMS AND INSTRUMENTS Specifications 9 Tanks(portable)-STEEL(Accommodate at least 3
complete human bodies)
10 Student microscopes (Light)
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 572 -
11 Revolving stools(Steel)
12 Dissection tables(full size) 13 Dissection tables(small size)
14 Student lockers 15 Full model human male and female (detachable)- Vinyl
model
SL. NO.
NAME OF EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
Consumables & Accessories
Unit Cost For each
item
Expected life of
the equipme
nt
CMC rates for
Post-Warranty next 5 consecutive years
Laminated Histology Charts and models and viscerae and Slides- provided separately MODELS/CHARTS FOR MUSEUM: Specifications 16 Full skeleton 17 Vertebral column
18 Vertebral column with pelvis 19 Articulated pelvis
20 Full Skeleton Loose bones
21 Cardiac muscle 22 Skeletal muscle
23 Smooth muscle 24 Compact bone
25 Spongy bone
26 Spleen 27 Lymph node
28 Tonsil
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 573 -
29 Thymus
30 Trachea 31 Lung
32 Submandibular gland 33 Sublingual gland
34 Parotid gland
35 Tongue 36 Esophagus
37 Stomach(body) 38 Stomach (pylorus)
39 Liver
40 Pancreas 41 Duodenum
42 Jejunum 43 Ileum
44 Large intestine 45 Cecum with APPENDIX
46 Gall bladder
47 Kidney 48 Ureter
49 URINARY BLADDER with prostate 50 TESTIS with vas deferens
51 Ovary
52 UTERUS with uterine tube 53 Vagina
54 Thyroid 55 Suprarenal gland
56 Pituitary gland 57 Skin
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 574 -
58 Mammary gland
59 Spinal cord 60 Cerebrum
61 Cerebellum 62 Eye
63 Placenta
64 Umbilical cord 65 Ear
66 Tongue 67 Zona pellucida
68 Morula
69 Blastocyst 70 Sperm
71 Ovum-matured 72 Ovum-immatured
73 Placenta 74 Placental barrier
75 Turner syndrome
76 Kleinfelter syndrome 77 Fallot’s tetralogy
78 Velamentous placenta 79 Battledore placenta
80 Trilaminar germ disc
81 Bilaminar germ disc 82 Developing notochord
83 Neural tube defects 84 Physiological hernia
85 Developing foregut 86 Developing midgut
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 575 -
87 Developing hndgut
88 Devleoping heart 89 Descent of testis
90 Developing kidney 91 Anatomy of pouch of douglas
92 Developing male reproductive system
93 Developing female reproductive system 94 Developing brain
95 Developing tongue 96 Developing eye
97 Developing lens
98 Devloping inner ear 99 Developing pinna
100 Middle ear 101 Semicircular canals
102 Long bone of child showing blood supply 103 Long bone of adult showing blood supplyand
ossification
104 Developing pituitary 105 Developing suprarenal
106 Neural crest cells and derivatives 107 Karyotyping
108 Development of diaphragm
109 Development of liver 110 Developmnt of spleen
111 Development of lungs 112 Bifurcaion of trachea
113 Larynx 114 Pharynx
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 576 -
115 Mandible 116 Right lung
117 Left lung 118 Heart
119 Heart with pericardium 120 Trachea with oesophagus
121 Trachea
122 Diaphragm 123 Liver
124 Kidney –right and left 125 Kidney (both) + urinary bladder
126 Spleen
127 Duodenum + pancreas + spleen 128 Stomach
129 Jejunum + ileum 130 Caecum with appendix
131 Rectum + anal canal 132 Small intestine
133 Large intestine
134 Male composite viscera 135 Female composite viscera
136 Urinary bladder with prostate gland 137 Urinary bladder
138 Testis right and left
139 Perineum male 140 Perineum female
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 577 -
141 Spinal cord
142 Meninges 143 Whole brain (both the hemispheres)
144 Cerebrum - half brain (one hemisphere) 145 Cerebellum
146 Cerebellum + brain stem
147 Brainstem 148 Cerebrum with brain stem HEAD & NECK(MUSEUM) 149 Sagittal section
(showing pns, pharynx, larynx & nasal cavity)
150 Eyeball 151 Eyeball sagittal section
152 Eyeball coronal section 153 Lens
154 Thyroid gland with isthmus
155 Composite viscera (tongue + larynx+ pharynx) 156 Axilla with arm 157 Cubital fossa
158 Palm 159 Wrist
160 Complete upper limb 161 Complete lower limb
162 Ts forearm
163 Ts arm 164 Femoral triangle with back of thigh
165 Leg with foot
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 578 -
166 Ts thigh
167 Ts leg 168 Cardiac muscle
169 Skeletal muscle
170 Smooth muscle 171 Ts- compact bone
172 Ts-spongy bone 173 Hyaline cartilage
174 Elastic cartilage.
175 Fibro cartilage 176 Artery
177 Vein 178 Spleen
179 Lymph node 180 Tonsil
181 Thymus
182 Trachea 183 Lung
184 Submandibular gland 185 Sublingual gland
186 Parotid gland
187 Tongue 188 Esophagus
189 Stomach(body) 190 Stomach (fundus)
191 Stomach (pylorus) 192 Liver
193 Pancreas
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 579 -
194 Duodenum
195 Jejunum 196 Ileum
197 Submandibular gland 198 Appendix
199 Gall bladder
200 Kidney 201 Ureter
202 Urinary bladder 203 Testis
204 Vas deferens
205 Prostate 206 Ovary
207 Uterine tube 208 Uterus
209 Vagina 210 Thyroid
211 Suprarenal gland
212 Pituitary gland 213 Skin ls (thick)
214 Skin (thin) 215 Mammary gland (active)
216 Mammary gland (inactive)
217 Spinal cord 218 Cerebrum
219 Cerebellum 220 Retina
221 Cornea 222 Placenta
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 580 -
223 Umbilical cord
224 Tongue 225 CADAVER
STORAGE TANKS (Full SS)
CADAVER STORAGE TANKS (Full SS) (Accommodate full human cadavers- at least 2 in each tank) Specification
1. OVER ALL SIZE: 72” (L) x 60” (W) x 24” (H)
WITH CASTER
2. FOUR SIDES ENCLOSED BY 1.6 MM SS SHEET 3. BOTTOM SHELVES MADE OF 1.6 MM SS SHEET
4. BOTTOM STRUCTURE MADE OF 40 X 40 X 6 MM ANGLE FRAME
5. LIDS MADE OF 1.2 MM SS SHEET (DOUBLE SHEET MOULDED) WITH ONE HAVING
HANDLE-6.
6. INSIDE ONE HAVING BOWL FOR DRAINAGE WATER. WHEN GET THE SOLUTION
7. RAISED INSIDE THE CABINET THEN CLOSED THE ADJUSTABLE KNOB. 8. MOUNTED ON 200 MM CASTER (HEAVY DUTY)
9. EVERY JOIN WITH ARGON WELDING.
10. FINISH WITH GLOSSY POLISH.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 581 -
SL. NO.
NAME OF EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
Consumables & Accessories
Unit Cost For each
item
Expected life of the
equipment
CMC rates for Post-Warranty
next 5 consecutiv
e years
Department of Orthopedics 1
Prone position head rest (gel padded), dimensions: 280 x 240 X 140 mm adult size
2
Universal patient positioner (gel padded) large, 380 X 140 X 80 mm for shoulder, lateral torso and under knees support adult size
3
Dome shape flat bottom gel positoner, large 510 x 150 X 125 mm (semicircular cushion positioner) for chest, pelvis and leg support in prone position, adult size.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 582 -
4 High Definition Arthroscopy Set
Specification of High Definition Arthroscopy Set: True High Definition (HD 3 Chip) Camera System 1080p-1 No
720p, 1080i, 1080p Selectable Multiple digital outputs (HD & SD Outputs) Light source communication Electronic zoom (in p-modes only) Autoclavable Camera Head Shockflex prism mounting Resolution 1920X1080p, Light up card edge receptable Progressive scanning, Aspect ratio 16:9 2 Camera Head Buttons for 4 Remote Fuctions
300W Xenon Light Source- 1 No
Automatically adjust to optimal light intensity Auto Bulb saver function Stand by Mode Homogenized Light distribution Light Guide Locking Mechanism OLED Window
Fiber Optic Light Guide Cable 5mm, Autoclavable-1 No High Definition Monitor- 1 No
24 '' or More Fully High Definition Monitor
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 583 -
Fully compatible with HD and Digital peripherals Sealed front panel in light-weight design with
VESA mount Wide-screen 16:9 aspect ratio PIP functionality Conntrast Ratio-1000:1 Resolution- 1920x1200
High Definition Arthroscope, 4mm, 30 deg, Autoclavable-1 No Arthroscope sheath- 1 No
5.9mm, Dual Stopcock system, Autoclavable, including Obturator
Shaver Console -1 No
Shaver Console 230 Volt Capacity to recognize the Hand piece, display of
speed The console should have option for connecting
Large Bone Drill & Saw Handpiece. Shaver Hand Piece-1 No
500- 12,000rpm, 500- 2,500 cpm, Single and Multi-turn Oscillate
Chuck for small drilling (for shoulder anchors etc) -1 No
Shaver Hand Piece should adapt the chuck
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 584 -
Cutters
Full Radius resector, 4.2mm, 13 cm-6 Nos Bendable Cutter-6 Nos Bender for bendable cutter-1 No
Wireless Foot control-1 No
3 pedal foot control Hand Instruments
Wide bite Straight punch-1 No Alligator Grasper-1 No Hook Probe-1 No 90 deg rotary puch,right 90 deg rotary punch,left
Arthroscopic Pump System-1 No
Easy to setup and use. Flow not less than 2 lt / min. Pressure ranging 30 - 150 mmHg Weight should not more than 7 lbs System should be supplied with auclavable remote
control Inflow / out flow tubing set-10 Nos Arthroscopy Trolley(Indian)-1 No
The System should be CE/US FDA Approved.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 585 -
5 C-ARM MACHINE (IMMAGE INTENSIFIER)
SPECIFICATION OF C-ARM MACHINE (IMMAGE INTENSIFIER) (C-ARM FULLY MICROPROCESSOR BASED SYSTEM WITH FEATHER TOUCH PANAL) IMAGE INTENSIFIER:
6 & 9 with high imaging System with high performance capability
CONTROL PANNEL & GENERATOR:
All operation on control panel k-board. Microprocessor based control with feather touch
panel. Generator unisearch IMD unit. Excellent fluoroscopy. Radiography output 25mA. On requirement Fluoroscopy: foot switch & on the control panel. Kvp variation of 40 -110kvp. 3 step mode selection, normal (LIH), PULSE and
LIVE control. Digital kvp metering display. Digital ma metering display. Foot switch.
X-RAY TUBE HEAD (User Friendly Design):
Duel focus having 0.6mmand 1.8mm focus. Anode heat storage capacity 30kj. Anode cooling rate250 w/hr.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 586 -
Type of Generator – khz hf X-Ray Tube - Fluro 0.6mm X 0.6mm Focal Spot - 1.5mm X 1.5mm Fluro / Radio KVP - 40-110kvp Fluro mA - 0-4 mA Fluro Timer - 5 Minute MAS - Up to 200 Power Requirement - 220V/50-60 hz & 3.5 kw Image Intensifier - 9 Inch
C-ARM FEATURE Rotation 360Degree Source to II Distance 90Cms Arc orbital Movements 110Degree Pann movements 0-25Degree Horizontal Travel 22 cms Vertical motorized movement 32cms Detachable Cassette Holder (Option) 10” x
12”&8” x 10” TV MONITORS
15” / 17” Colour (Option) 625 Lines 50-60 hz High resolution display capability monitor.
MEMORY OPTION 26 frame memory Computer compatible (Option) 100 frame memory (Option)
6 Orthopaedic Electric Drill System Orthopaedic Electric Drill System:
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 587 -
Driving Unit includes Motor, Stand, foot Control, Flexible Shaft-1Pc, Tool Kit, Oil Bottle & special container
Cannulated Drill Hand piece max. speed 1200 RPM & with Fixed S.S.Chuck (0-1/4”)
Reaming Handpiece with Max. Speed 400 R.P.M. Cannulated & AO type quick coupling.
Drill Chuck Adaptor with Jacob’s Stainless Steel Chuck (USA)
Pistol Grip Sagital Saw (Set of five blades) Flexible Reamers (2 pieces with reaming pieces
6mm – 13mm)
7 DIGITAL ELECTRONIC TOURNIQUET
SPECIFICATION OF DIGITAL ELECTRONIC TOURNIQUET:
Cuff pressure range: 10 to 450mmHg. Pressure regulation: +/- 10mmHG of set point. Online Setting: Increase and decrease in pressure
settings Timer: Timer range from 9hours to 59minutes. Internal least count: Timer 1minute/Internal
1/1000 second. Alarm & Display Indication:-
When set pressure is over When pressure goes 25mmHg above set
pressure. When pressure goes 25mmHg below set
pressure. In battery mode, when battery voltage
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 588 -
reaches 9V. Memory: Pressure set in earlier session is stored
and displayed, when machine is switched on again.
Pressure Table: Maintains set pressure under leak condition.
Backup: 3hours battery backup. (on full charge) Switch over: Automatic switch over from offline
to online (vise versa). Power: 230V(AC)/50Hz ± 10% (Voltage
fluctuations from 180-270). Stabilizer: Inbuilt. Cuffs: Different Sizes of five cuffs—washable &
easy fitting (Paediatric, small, medium, big & large).
Digital Display: Digital Display of time elapsed, set time, actual and set pressure.
8 SMALL FRAGEMENT INSTRUMENT SET
SMALL FRAGEMENT INSTRUMENT SET Content List:--
i. Drill Bit Q.C.End 2.5mm Dia—115mm Length—
2Pcs.,
ii. Drill Bit Q.C.End 3.2mm Dia—130mm Length—
2Pcs.,
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 589 -
iii. Counter Sink—6mm Head—1Pc.,
iv. Quick Coupling Handle—T-Type—1Pc.,
v. Tap with T-Handle for 3.5mm Cortical Screw—
2Pcs.,
vi. Tap with T-Handle for 4.0mm Cancellous Screw—
2Pcs.,
vii. Drill & Tap Sleeve combined 2.5/3.5mm—1Pc.,
viii. Insert Drill Sleeve 2.5mm—1Pc.,
ix. Screw Driver Shaft Q.C.End ---2.5mm Tip—1Pc.,
x. Hexagonal Screw Driver 2.5mm tip—1Pc.,
xi. Small Depth Gauge—1Pc., Sharp Hook—1Pc.,
xii. Small Neutral & Loaded Drill Guide—1Pc.,
xiii. Spanner—11mm—1Pc.,
xiv. Small Plate Bender—pair—1Pair.,
xv. Plier Cum Wire Bender—1Pc.,
xvi. K-Wire Bender—1Pc.,
xviii) Reduction Forceps—Serartted---Ratchet
Lock—140mm—1Pc.,
xix) Reduction Forceps—Pointed---Ratchet
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 590 -
Lock—140mm—1Pc.,
xx) Self Centering Bone Holding Forceps—
190mm—1Pc.,
xxi) Hohmann Retractor 8mm wide, short narrow
point, 160mm Length. 2Pcs.,
xxii) Hohmann Retractor 15mm wide, 160mm
Length—2Pcs..,
xxiii) Periosteal Elevator ---Straight—160mm
length —8mm—1Pc.,
xxiii) Instrument Box with two trays length 300mm—1Pc.
9 LARGE FRAGEMENT INSTRUMENT SET
LARGE FRAGEMENT INSTRUMENT SET Content List:--
i. Drill Bit Q.C.End 3.2mm Dia—130mm Length—3
Pcs.,
ii. Drill Bit Q.C.End 4.5mm Dia—130mm Length—
1Pc.,
iii. Counter Sink—8mm Head—1Pc.,
iv. Quick Coupling Handle—T-Type—1Pc.,
v. Tap with T-Handle for 4.5mm Cortical Screw—
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 591 -
2Pcs.,
vi. Tap with T-Handle for 6.5mm Cancellous Screw—
1Pc.,
vii. Insert Drill Sleeve 3.2mm—1Pc.,
viii. Drill & Tap Sleeve combined 3.2/4.5mm —1Pc.,
ix. Drill & Tap Sleeve combined 3.2/6.5mm—1Pc.,
x. Screw Driver Shaft Q.C.End ---3.5mm Tip—1Pc.,
xi. Large Hexagonal Screw Driver 3.5mm tip—1Pc.,
xii. Large Depth Gauge—1Pc.,
xiii. Sharp Hook—1Pc.,Spanner—11mm—1Pc.,
xiv. Large Neutral & Loaded Drill Guide—1Pc.,
xv. Pointed Drill Guide with 4.5mm Tap Sleeve &
3.2mm Drill Sleeve—1Pc.,
xvi. Large Plate Bender—pair—1Pair.,
xvii. Instrument Box with two trays length 300mm—
1Pc.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 592 -
10 BASIC INSTRUMENT SET
BASIC INSTRUMENT SET Content List:--
i. Universal Open Hand Drill –2Pcs.,
ii. Wire Tightner Cum Wire Twister—1Pc.,
iii. Guide Wire Introducer with Four Pegs—1 Pc.,
iv. Plier Cum Wire Bender Cum Wire Cutter –9” –
1Pc.,
v. Wire Cutter Double Action Length 250mmm-
1Pc.,
vi. Self Centering Bone Holding Forceps 150mm—
1 Pair,
vii. Self Centering Bone Holding Forceps 240mm—
1 Pair,
viii. Self Centering Bone Holding Forceps 280mm—
1 Pair,
ix. Reduction Forceps –Serrated—Speed Lock—
170mm—2 Pair,
x. Reduction Forceps –Serrated—Speed Lock—
200mm—2 Pair,
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 593 -
xi. Reduction Forceps –Serrated—Speed Lock—
240mm—2 Pair,
xii. Pattela Bone Holding Forceps –Four Prongs—1
Pc.,
xiii. Lane Bone Holding Forcep with Ratchet
200mm—2 Pc.,
xiv. Lane Bone Holding Forcep with Ratchet
170mm—2 Pc.,
xv. Lane Bone Holding Forcep with Ratchet
200mm—2 Pc.,
xvi. Bone Cutting Forceps (Straight) Double
Action—190mm –1 Pc.,
xvii. Bone Cutting Forceps (Straight) Double
Action—270mm –1 Pc.,
xviii. Bone Cutting Forceps (Curved) Double
Action—190mm –2 Pcs.,
xix. Bone Cutting Forceps (Curved) Double
Action—225mm –1 Pc.,
xxxiii) Chisel with Fibre Handles 5,10,20,30mm
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 594 -
--- 1 Pc. Each.
xxxiv) Osteotome with Fibre Handle Straight
5.10.14.16.20mm—1 Pc. Each.
xxxv) Osteotome with Fibre Handle Curved
5.10.14.16.20mm—1 Pc. Each
xxxvi) Bone Currette Double ended 4mmx6mm
–2Pcs.
xxxvii) Bone Currette Double ended 6mmx9mm
–2Pcs.
xxxviii) Langenback Retractor---Small—1Pc.
xxxix) Langenback Retractor---Large—1Pc.
xl) Bristow Retractor---1Pc.
xli) Self Retaining Retractor—Small—2 pcs.
xlii) Self Retaining Retractor—Medium—2 pcs.
xliii) Self Retaining Retractor—Large—1 pc.
xliv) Periosteal Elevator Curved—6,10,14,20---
1 Pc. Each
xlv) Bone Hammer 200,350,500gms--- 1 pc. Each
11 Large External Fixator
Large External Fixator Rod of dia 11 mm in
– Carbon fibre – lengths 100 – 400 mm – carbon fibre rod, curved for pelvis
Clamp, clip-on self-holding, MR-safe
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 595 -
Aperture for rods 11 mm Schanz screw 5mm with lengths 125 – 200 mm All instruments must be enclosed in a Vario with
lid with an insert for Schanz Screws The instruments should have Combination
Wrench of diameter 11.0mm The instruments should have Socket Wrench of
diameter 11.0mm,cannulated The instruments should have Combination
Clamp, clip-on, self-holding, MR-safe The instruments should have Clamp, clip-on,
self-holding, MR-safe The instruments should have Universal Chuck
with T-Handle The instruments should have Adapter for
Seldrill™ Schanz Screw with diameter 5.0 mm The instruments should have Compressor, open The instruments should have Short Trocar with
diameter 3.5 mm The instruments should have Long Trocar with
diameter 3.5 mm The instruments should have Handle for Drill
Sleeve The instruments should have Short Drill Sleeve
5.0/3.5 The instruments should have Long Drill Sleeve
5.0/3.5 The instruments should have Short Threaded
Drill Sleeve 6.0/5.0 The instruments should have Long Threaded
Drill Sleeve 6.0/5.0 The instruments should have Connecting Rod
5.0 mm, length 150 mm, Stainless Steel
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 596 -
12 Medium External Fixator
Medium External Fixator Rod of dia 8 mm in
o Carbon fibre o lengths 120 – 320 mm
Clamp, clip-on self-holding, MR-safe Aperture for rods 8 mm Schanz screw 4mm & 5 mm with lengths 80 –
175 mm All instruments must be enclosed in a Vario with
lid with an insert for Schanz Screws The instruments should have Combination
Wrench with diameter 8.0 mm The instruments should have Wrench, hexagonal
with diameter 3.5 mm with T-Handle The instruments should have Combination
Clamp, medium, clip-on, self-holding, MR-safe The instruments should have Clamp, medium,
clip-on, self-holding, MR-safe The instruments should have Drill Sleeve 4.0/2.5 The instruments should have Adapter for
Seldrill™ Schanz Screw diameter 4.0 mm The instruments should have Adapter for
Seldrill™ Schanz Screw diameter 5.0 mm The instruments should have Universal Chuck,
small, with T-Handle The instruments should have Short Trocar with
diameter 3.5 mm The instruments should have Long Trocar with
diameter 3.5 mm
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 597 -
The instruments should have Trocar with diameter 2.5 mm
The instruments should have Handle for Drill Sleeve
The instruments should have Short Drill Sleeve 5.0/3.5
The instruments should have Long Drill Sleeve 5.0/3.5
The instruments should have Short Threaded Drill Sleeve 6.0/5.0
The instruments should have Threaded Drill Sleeve 4.0
The instruments should have Long Threaded Drill Sleeve 6.0/5.0
13 Portable X-Ray Machine
Portable X-Ray Machine Specification;--- MICROPROCESSOR BASED DIAGNOSTIC 50 mA X-RAY MACHINE with following features
X-RAY TUBE UNIT –Oil filled stationary anode X-ray tube unit with focal spot 2.2 mm x 2.2 mm
RADIOGRAPHIC OUTPUT – mA Max mAs KV 50 250 45-55 40 200 60-75 30 150 80-85
KV SELECTOR – Select KV from 45 to 85 KV in 5 steps each
SUPPLY VOLTAGE COMPENSATOR – Adjust supply voltage from 180 v to 250 v automatically
LIGHT BEAM DIAPHRAGM Electronic DISPLAY – Digital display of mA ,
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 598 -
KVp & mAs OVERLOAD PROTECTOR IN BUILT mAs SELECTOR up to 250 mAs
Portable Stand ( can be dismantle Into smaller Parts)
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 599 -
SL. NO. NAME OF EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
Consumables & Accessories
Unit Cost For each
item
Expected life of
the equipme
nt
CMC rates for
Post-Warranty next 5 consecutive years
PHYSIOTHERAPY DEPARTMENT 1 T.E.N.S
Therapy unit
T.E.N.S Therapy unit >with 4 channel. >Micro computer based model >Digital display >Separate display for each channel intensity &Timer. >Pulse for TENS International standard:1-200 Hz/sec >Pulse width International standard:50-200micro sec. >Output current 1 - 60 ma for each channel. >Should have preprogrammed indication menu >Must have real time current sensing system with auto output off during poor contact for patient safety. >Mounted with trolley with wheel for easy transfer. >Should have international safety standard with CE certified.
2 Shortwave diathermy atleast 400 watt(micro processor controlled)
Shortwave diathermy atleast 400 watt(micro processor controlled) 1)High performance solid state generator with digital display. 2)High performance multi jointed arm 3)Continuous & pulsed mode(allows thermal & non thermal treatment) 4)Patient safety switch.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 600 -
5)Must have CE certified. 6)Safety standard class 1 7)Captive & inductive applicator. 8)Frequency 27.12 Mhz 9)Must have disc electrode with adjustable arm. 10)Pad electrodes for larger ,smaller & irregular surface area(small sinus electrode preferable) 11)Strap & other standard accessory preferable(knee jt,low back, upper back.)
Gymnasium Equipments
3 Suspension frame
Suspension frame with bed and all accessories
4 Multi gym or multi exerciser therapy unit
Multi gym or multi exerciser therapy unit
5 Quadriceps exercise table
Quadriceps exercise table with quadriceps hamstring torsion arm. Foam padded table & torque unit with two lever arm, Adjustable resistance.
6 Parallel bar adult
Parallel bar adult (height adjustable)
7 Static cycle
Static cycle >Dual shock absorber. >Adjustable tension. >Digital meter showing- Distance, speed,& calorie.
8 Complex exerciser unit
Complex exerciser unit should have suitable for shoulder elbow chest abdomen and lower limb exercise should be gradeable and adjustable for resistance foam padded table top on tubular frame the unit should be dimension 185-195 X 70-80 cm wide and the height should be 80 -85
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 601 -
cm complete unit consist of one table pan assembly and following attachement - ankle, hip, wrist,knee,abdominal and back exerciser it should include strap, harness,and over head pulley systems different iron weight plates starting from 0.25 kg and 1 kg total upto 30 kg pelvic rest 1 quadriceps rest 1 supination pronation wheel 1 wooden cabinet for storage
Physical Fitness Equipments
9 Treadmill Treadmill - >Motorized at least 125 kg capacity, >AC motor : capacity >_2.0 H.P (peak>_4.0 H.P) >speed 1-18 kph, >Incline 0-16%, >convenient hand controlled speed &incline. >Quick speed, quick incline. >Easy incline, 5 program upland running. >Diverse speed & incliner program. >Self stop.
OCCUPATIONAL THERAPY 10 Fluidotherapy
Fluidotherapy it should be used for double extrimity simaltaneously operated in pulse or continious mode treatment time adustable adustable air speed machine should mounted with wheel or trolley safety standard class 1 digital display
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 602 -
should have dry heat media (cellulose particles) with the machine as accessories
For hand exercise & rehabilitation
11 Finger Goniometer
Finger Goniometer
12 Goniometer Goniometer 13 Peg board Peg board
14 Wrist circumductor
Wrist circumductor
15 Grip exerciser Grip exerciser
16 Finger exerciser Table
Finger exerciser Table
17 Finger dexterity board
Finger dexterity board
18 Hand Gym kit board
Hand Gym kit board
General exercise items
19 Over head pulley
Over head pulley
20 Inclined sanding board
Inclined sanding board
21 Horizontal sanding board
Horizontal sanding board
22 Shoulder wheel
Shoulder wheel
23 Balance Balance board
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 603 -
board
24 Foot placement ladder
Foot placement ladder
25 Bolster set Bolster set
26 Wedge board set
Wedge board set
27 Quadriceps table
Quadriceps table
28 Stand in frame
Stand in frame
29 Trampoline Trampoline 30 ADL training
kit ADL training kit
31 Low rise exercise platform
Low rise exercise platform
32 Cp prone stander
Cp prone stander
33 Cp chair Cp chair 34 Wheel chair
for transfer training
Wheel chair for transfer training
35 Multiple gym exerciser
Multiple gym exerciser
1 DIGITAL ELECTRON
Cuff pressure range: 10 to 450mmHg.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 604 -
IC TOURNIQUET:-
Pressure regulation: +/- 10mmHG of set point.
Online Setting: Increase and decrease in pressure settings
Timer: Timer range from 9hours to 59minutes.
Internal least count: Timer 1minute/Internal 1/1000 second.
Alarm & Display Indication:- When set pressure is over When pressure goes 25mmHg above set
pressure. When pressure goes 25mmHg below set
pressure. In battery mode, when battery voltage
reaches 9V. Memory: Pressure set in earlier session
is stored and displayed, when machine is switched on again.
Pressure Table: Maintains set pressure under leak condition.
Backup: 3hours battery backup. (on full charge)
Switch over: Automatic switch over from offline to online (vise versa).
Power: 230V(AC)/50Hz ± 10% (Voltage fluctuations from 180-270).
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 605 -
Stabilizer: Inbuilt. Cuffs: Different Sizes of five cuffs—
washable & easy fitting (Paediatric, small, medium, big & large).
Digital Display: Digital Display of time elapsed, set time, actual and set pressure.
2 Titanium Elastic Nails
instrument set
Titanium Elastic Nails
The nail should be available in diameters – 2.0, 2.5, 3.0, 3.5 and 4.0 and length 440mm to cover all indications
The nail tip should be designed in such a way that the insertion is easy and the nail glides along medullary canal.
The design of the nail should allow fracture reduction and facilitate nail manipulation.
The implant should be available in titanium alloy (Ti-6AI-7Nb) that gives mechanical stability and elastic property.
The implant should have markings that allow direct rotational control of the nail tip in the medullary canal to reduce exposure to image intensifier
Titanium Elastic Nail set
The system should have a double drill Sleeve 4.5/3.2
The system should have a Drill Bit, 2.7mm dia., L 125/100mm 3-flute, for quick coupling
The system should have a Drill Bit, 3.2mm dia., L 195/170mm 3-flute, for quick coupling
The system should have a Drill Bit, 4.5mm dia., L 195/170mm 3-flute, for quick coupling
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 606 -
The system should have a Pin Wrench, 4.5mm, L 120mm
The system should have a Spanner Wrench for nos. 357.180/357.181
The system should have a Slotted Hammer 400g, detachable
The system should have a Locking Pliers that is flat nosed for TEN
The system should have a straight impactor and a bevelled impactor
The system should have an F-Tool The system should have an Awl that is curved and
has a sharp tip. The system should have an Extraction Pliers with
thread for TEN The system should have a Cutting Pliers for TEN The system should have a Hammer Guide The system should have an Inserter The system should have a SYNCASE Silicone Mat
170 x 460 mm The system should have a Lid for no. 675.420 The system should have a Tray, bottom, for
Instruments for 675.420 The system should have a Tray, middle, for
Instruments for 675.420 The system should have a Tray, top, for Implants
for no. 675.420 The system should have a SYNCASE Basic Tray,
height 145mm, neutral The system should have a Transport Case for
Syncase
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 607 -
3 Collinear Reduction
Clamp
The system should have a collinear reduction clamp with sliding mechanism that accepts four different attachment arms which can be mounted in four different positions using the mounting notches to accommodate various fracture types.
The cannulated feed rod of collinear reduction clamp should have a cannulation of ø 3 mm for temporary K wire fixation and a trigger for continuous and variable force application.
The reduction clamp should have a release button for adjustment of the attachment arm and release lever for the adjustment of the feed rod.
The system should have a reduction attachment for reduction against LCP plates for both large and small fragment plates which can be mounted on the tip of feed rod.
The system should also have a reduction attachment for reduction against LCP/ LC - DCP plates and for reduction against the bone which can be mounted on the tip of feed rod.
The system should have a combination wrench of Ø 8.0 mm for mounting the reduction attachments
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 608 -
The collinear reduction clamp should have various attachment arms which give a reduction tool according to different clinical needs - Hohmann shaped arm; Pelvic Arm; Percutaneous Arm, Bone Hook Shape arm.
4 PULSE LAVAGE SYSTEM
1. Irrigation pressure electronically
controlled. 2. Autoclavable & reusable tubes of medical
grade silicon. 3. Complete Sterility is maintained. 4. Easy loading of the tube in the machine. 5. Efficient peristaltic pump. 6. Water Resistance Display. 7. Foot control operate machine. 8. Pre Set features. 9. Four types of irrigation possible. 10. Inbuilt fuse and voltage control rectifier. 11. Power Supply 230 V AC 50 Hz ± 10% 12. Stainless Steel Body
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 609 -
SL. NO. NAME OF EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
Consumables & Accessories
Unit Cost For each item
Expected life of
the equipm
ent
CMC rates for
Post-Warranty next
5 consecu
tive years
Department of Pathology & Central Research Laboratory (for ESI PGIMSR, Manicktala) 1 CRYOSTAT CRYOSTAT
1. Freely standing cryostat with chamber
temperature down to -35°C. Actively cooled quick freeze shelf with optional 2 station Peltier unit for freezing down to -40°C with Specimen storage shelf to store up to 8 chucks.
2. Maintenance free microtome with section
thickness setting preferably from 1 to 100 µm. 3. Equipment must be suitable for sectioning of
specimen having diameter at least up to 50 mm & facility of Specimen orientation must be provided.
4. Vertical Specimen Stroke length: 56 mm or above,
Horizontal Specimen feed: Approx. 25 mm
5. Provision must be available for Motorized (preferably at 600 μm/s &900 μm/s. – as rapid & slow respectively) coarse feed . Machine should have the Trimming facility via motorized coarse feed.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 610 -
6. Blade holder system to hold both high profile &
low profile blade preferably simultaneously. Disposable Blade holder system must be provided with lateral displacement and integrated glass anti-roll guide.
7. Should have facility for UV disinfection.
8. Preferably have Ag Protect nanosilver coating.
9. Electronic locking key to avoid any inadvertent changes in program setting & closed drainage system to allow control disposal of fluids
10. Automatic hot gas defrost, 1 automatic defrost cycle/24 hours, selectable time .
11.Specimen retraction : 20 μm
12.Specimen orientation : X‐Y axis 8 deg and Z axis 360 deg
13. Instrument should be supplied with disposable blade holder for high and low profile blades, disposable blades (high profile and low profile), Specimen chucks, Brushes, Oil etc. 14. A 2 K.V.A online UPS also to be supplied with the instrument for at least 30 min standard backup.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 611 -
2 SEMI-MOTORIZED ROTARY MICROTOME
SEMI-MOTORIZED ROTARY MICROTOME 1. Precision specimen orientation system with clear
zero reference point. 2. Force balancing system should be available for
effortless and uniform hand wheel rotation. 3. Section thickness setting from 0.5 to 100 μm, with
a provision of step-by-step increment. 4. Specimen feed of appx. 28 mm or above and
vertical stroke length of 70 mm. 5. Trimming section thickness setting range: 5 – 500
μm with a provision of step-by-step increment 6. Precise specimen orientation of 8° in horizontal
and vertical direction. 7. Coarse feed : motorized with variable speeds. 8. Knife holder base with lateral displacement
facility for utilization of the entire Blade edge with clearance angle indication
9. Hand wheel lockable at any position with
additional 12’O’clock locking by simply pulling the handle
10.Slot cover to protect the interior of the instrument from sectioning debris. specimen size: 50 X 55 mm
11. Section waste tray must be provided. 12. Section thickness indication-visual display.
13. System should be equipped with both High profile & 14.Low profile disposable blade holder.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 612 -
15.5 packet of each blade (High profile & Low profile) to be supplied with the instrument.
16.2 K.V.A UPS also to be supplied with the instrument for standard 30 min back‐up.
17.It should be CE/ISO certified .
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 613 -
3 FULLY
AUTOMATED SLIDE PREPARATION SYSTEM
FULLY AUTOMATED SLIDE PREPARATION SYSTEM
1. The system must be walk away fully Automated
Slide Preparation system to process slides for Immuno Histo Chemistry, In Situ Hybridization, Silver In Situ Hybridization ,Immuno Fluroscence and should be able to process IHC with IVD approved p16 antibody for the stage detection of cervical cancer.
2. There should be options for varying temperature and incubation time.
3. The system must be fully automated to do baking, deparaffinization, antigen retrieval and staining within the same system .
4. The System should be open for Primary antibodies.
5. The system should be able to generate fully prepared 60 IHC Slides in a 9-10 hour shift.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 614 -
6. The system must have individual Slide heaters for all the slide positions,slide temperature should be individually controlled.
7. The system should have a mechanism which will
be able to control evaporation and protect tissue integrity on each slides.
8. The reagents and the antibody should get mixed through air whirlpool and no mechanical part should be involved for mixing the reagents and antibodies.
9. Only 100 micro litre of Primary antibody must be required for all types of slides irrespective of the size of the tissue section.
10. There should be free supply of reagents, buffer s and DAB for the first 200 Slides.
11. The system should be able to recognize Slide Specific Barcode label which would provide automatic programming, patient and case identification.
12. The system should be US FDA certified.
13. Online UPS must be provided with minimum one hour back.
14. The system should have compatible computer
and software of latest technology available during installation. The software should be upgradable.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 615 -
4 Real-Time
PCR Real-Time PCR:
1. The Real time PCR System must have
International and/or National quality and safety certification, e.g. CE and/or UL/cUL and/or ISI certified and /or IVD certified.
2. The Real time PCR System should have an open platform system, and
musthave provisions for using third party kits and reagents for the molecular diagnosis of infectious diseases
3. Ready to use DNA and RNA master mixes should be available 4. The Real time PCR System must at least have the following In vitro
Diagnostics approved kits available from the same manufacturer which are pre-validated on the quoted model :
Human Immunodeficiency virus Hepatitis B virus Hepatitis C virus Cytomegalo virus Epstein Barr virus Herpes Simplex virus
5. There should be provision for using the system as simple Thermocycler for qualitative molecular detection of infectious diseases.
6. System should be capable of running two different assays simultaneously in a
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 616 -
single run. 7. System should be able to run both standard mode PCR as also FAST mode
runs.
8. The Automated Real time PCR System should be accompanied with a desktop or laptop computer and printer system (required for the functioning and data storage and printing of reports) with original operating system and free software support for the lifetime of the machine. Systems should be supplied with latest Pentium computer with color monitor and printer. It should have an interface to laboratory host computer. System software should be based on Windows XP and validated for IVD application.
9. Remote data monitoring via connected/networked PC and download data
10. The Automated Real time PCR System should have already been installed in at least two (02) reputed Academic and / or Medical institutions and / or reputed accredited diagnostic laboratories in the Eastern region of India.
11. Thermal Cycler Mechanism:- Peltier based heating and cooling mechanism for maximum uniformity with even heating and cooling, with temperature accuracy of ±0.5°C and temperature uniformity of ±1°C.
12. Calibrated dyes set on installation:- FAM/SYBR Green, VIC/JOE, NED/TAMRA/Cy3, ROX/Texas Red, Cy5. Calibration for new dyes within the wavelength range should be possible by following the custom dye calibration procedure in the User’s Manual without purchase of additional filter sets.
13. Sample Layout:- Should be flexible for the tube input volumes having capability of running 96 or more samples.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 617 -
14. Any additional step of centrifugation of tubes while performing the assay should NOT be there.
15. Should come with standard chemistries for gene expression, quantification,
mutation scanning, allelic discrimination, genotyping and methylation studies. System should be able to add a melt curve during a run if required. Instrument should be able to distinguish between 5,000-10,000 DNA genome equivalents (a two-fold difference in copy number) with confidence level up to 99.7%.
16. Temperature range should be from 4°C - 98°C with a ramp rate of 1.2°C / sec and a ramp rate of 3.6ºC for FAST run. Peak block heating rate of 5.5°C.
17. Halogen lamp source with 5 different wavelengths with minimum cross-talks. The assay should not be based on one single wavelength of light. Should be able to detect all wells equally with same optical path length. Should maintain iso-optical detection in all wells for maximum uniformity with CCD camera.
18. System should be 5 color & capable for multiplexing. Should have 5 excitation filters and 5 emission filters to cover wide chemistries. Each sample in each well should be monitored with dedicated fiber optic bundle to have improved sensitivity for fluorescence measurement and to avoid cross talk.
19. Reaction Volume 5 μl-30 μl
20. Should NOT require any passive reference dye
21. System should use close tube process to avoid any cross contamination. 22.Software: Unlimited user Software license with maximum feature should come absolutely free of cost for the life of the machine, with additional features of creation of customer genotyping, DNA quantification, gene expression, and pathogen detection assays, resulting in creating template files that can easily be saved and used to run assays that require set protocols.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 618 -
5 MINI VERTICAL GEL SYSTEM
MINI VERTICAL GEL SYSTEM
1. Gel Size should be minimum 8.3 x7.3 cm (W x L)
2. Glass Plate Size minimum dimension should be
Inner - 10.1 x 7.3 cm
Outer - 10.1 x 8.2 cm
3. Should be IEC 1010/ CE Certified.
4. Same system should be able to perform western blotting, 2D/tube gel electrophoresis & electro elution also.
5. No. of wells: 10, thickness: 1.0 mm
6. The system should accommodate upto 4 handcast or precast gels at a time.
7. Typical run time should be less than an hour
8. Buffer volume: Less than 200 ml for each of the chambers
9.Should come with the facility to run 4 gels together with companion running module.
10.Buffer volume : 700 ml for 2 gels and 1000 ml for 4 gels.
11.Same System Should be compatible with electroelution and western blotting in the same tank
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 619 -
12.Should come with consumables for at least 100 reactions.
13.POWER SUPPLY:-
• Voltage Output range (programmable): 5-250 V, fully adjustable in 1 V increments;
• Current Output range (programmable): 0.01 to 3.0 A, fully adjustable in 0.01 A increments
• Power output range (programmable): 1-300 W, fully adjustable in 1 W increments
Output Type: Constant voltage, Current or Power with
automatic crossover
Output terminals: 4 pair recessed banana jacks in parallel
Pause / resume function should be available.
2-line, 16 character backlit LCD is preferred.
Add-on safety features like “No-load” detection, rapid resistance change detection, ground leak detection;
overload / short-circuit detection; overvoltage protection; over-temperature protection are must. The system should comply with EN61010 or equivalent safety compliance.
Input protection: Fuse on hot and neutral.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 620 -
6 SEMIDRY TRANSBLOT SYSTEM FOR WESTERN BLOTTING
SEMIDRY TRANSBLOT SYSTEM FOR WESTERN BLOTTING
• The system should allow fast, efficient and economical blotting without buffer tank or gel cassettes.
• Spring mounted platinum coated titanium
anode and stainless steel cathode plate electrode to provide consistency and reproducibility in results, durability and extended life-span of the equipment.
• Maximum Gel Size should be 24 cm x 16 cm
• The system should be capable of transferring
multiple gels simultaneously.
• Current requirement should be upto 3000mA.
• Special agarose gel support frame for
performing southern blotting in the same system as an add-on facility would be preferred.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 621 -
• Should come with consumables for atleast 100 runs
Power pack should have maximum output: 250V, 3.0A, 300W with the programmable facility for each parameters are as follows.
• Voltage Output range (programmable): 5-250 V, fully adjustable in 1 V increments;
• Current Output range (programmable): 0.01
to 3.0 A, fully adjustable in 0.01 A increments
• Power Output range (programmable): 1-300
W, fully adjustable in 1 W increments
Output Type: Constant voltage, Current or Power with automatic crossover
Output terminals: 4 pair recessed banana jacks in
parallel
Timer: up to 99 hr, 59 min
Pause / resume function should be available.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 622 -
2-line, 16 character backlit LCD is preferred.
Add-on safety features like “No-load” detection,
rapid resistance change detection, ground leak detection; overload / short-
circuit detection; overvoltage protection; over-temperature protection are must.
The system should comply with EN61010 or
equivalent safety compliance.
Input protection: Fuse on hot and neutral.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 623 -
7 Fast blotting
system
Fast blotting system
1. Fast blotting system for blotting four gels
simultaneously
2. Should have USB ports for filmware transfer 3. System should have a cooling fan
4. should have inbult power pack supply
5. should have user interface
6. should have an audible alarm
7. should have user notification with following
features
power fail during run
no load detection
no cassette detection
end of run
8. should have user defined programmable methods minimum 25
8 ELECTROPORATOR
ELECTROPORATOR
1. Electroporator system with the capability to electroporate eukaryotic cells, prokaryotic cells (bacteria), yeasts and other microorganisms.
2. Instrument should have features for adjusting voltage & pulse length
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 624 -
3. Pulse Voltage range : 10-3,000 V
4. Should include all accessories for electroporation
5. It should also have required software, pre-set optimized programmes and other accessories
9 MILLI Q WATER PURIFICATION SYSTEM
MILLI Q WATER PURIFICATION SYSTEM The complete water purification system should comprise of two stages as below: Stage I Stage 1 of the system must comprise of the following:- The tap water supply generally has a particulate reading of 1200 ppb. A suitable pre-filtration system for bringing the concentration from 1200 ppb to 100 ppb before use with the R.O. System should be provided. RO water system with a dispensing rate of 1 Liter per minute or better and large cartridges of over 20 inches each for a long life. The removal efficiency of the RO water system should be as follows:- Suspended solids- 100%, Bacteria - 99.5%, Viruses -
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 625 -
99.5%, Pyrogens - 99.5%, Organic, molecular weight >250 daltons - 97-99.5%, Monovalent inorganics - 94-96%, Divalent Inorganics - 96-98%, Trivalent Inorganics- 98-99%. The water quality should be suitable enough for general microbiology, general immunology and other activities such as glassware washing, deionization systems, glassware rinsing, buffer solution preparation, standard solution preparation etc. 2 extra prefilter, carbon filters ( total 3 each) to be included. Storage tank of around 15 -20 Liter at outlet of RO. System should include automatic flush valve, which extends RO membrane life: It should automatically initiate the purification process by flushing the RO membrane and tank for three minutes after each 12 hour period of inactivity. STAGE II For Ultra pure water Water quality must be good enough for Inorganic analysis: Ion chromatography, Inductively coupled plasma/mass spectroscopy, Atomic absorption, flame emission spectroscopy, trace metal analysis, Organic analysis such as Liquid chromatography, HPLC, Gas chromatography, Electrophoresis, Total organic carbon, Tissue culture, Clinical, General Microbiology, General Immunology, Recombinant DNA etc. Purification technique used / filters included to be as follows :- Carbon filtration, De-ionization - 2 no’s of polishing grade mixed bed, Organic adsorption cartridge, Ultrafiltration 0.1 micron, Ultraviolet reactor ( with dual wave length of
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 626 -
185 & 254 nm), hollow fiber filter (optional). Smart independent dispensing system (Dispensing Gun) for low volumes of ultra pure water. In line pressure regulator. Dispensing flow: 1.5 - 2 L /minute of Type I or 1 L/ m with hollow fiber filter Extra membranes to be included within the offer: Pre-filters and Carbon Filters for RO system :- 18 No.’s each R.O. : 2 No.’s Polishing Station / Ultrapure Station : 2 Sets each complete. All items necessary to operate equipments must be quoted.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 627 -
10 LIQUID
NITROGEN VAPOUR STORAGE SYSTEM
LIQUID NITROGEN VAPOUR STORAGE SYSTEM
1. Liquid Nitrogen (LN2) storage system for long term preservation of Frozen samples in 100% vapor phase at -190 degrees Centigrade with no contact of sample with lLN2
2. Should be jacketed model
3. Capacity for at least 30 litres of LN2 in outer jacket
4. Minimal interior temperature gradient from bottom
of Chamber to below the lid
5. LN2 level indicator and safety relief valve should be present
a. Minimum 8000 of 2ml cryovial storage
capacity in racks and boxes (all racks and cryoboxes should also be provided with 1 set spare rack and its set of boxes)
6. LN2 system should be safely mounted on castors
for easy and safe mobility when when loaded
7. Automated real time display monitor below the lid
8. Automatic filling and control of LN2 level
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 628 -
9. Alarms for deviations from set values of level and temperatures
10. Self diagnosis at start up
11. Program lock to prevent unauthorized intervention
12. Should have temperature log software for
monitoring the parameters continuously and its history
13. Liquid Nitrogen Cylinders (2 in number) to connect
to the storage vessel in order to automatically re-fill LN2 in the storage vessel as and when required. Capacity of Cylinders to be minimum 200 litres each, 22 PSI liquid delivery, equipped with LN2 level and pressure gauges and safety relief valve and mounted and restrained on castors for easy mobility.
14. Should be connected through Y connection: 1,
LN2 transfer hoses 03.
15. Should have inventory system for 2 ml cryovials
16. Racks should have locking system to prevent fall out of sample storage boxes
17. Should provide 2 sets of LN2 safe cryogloves
IQ/OQ/PQ validation documents should be provided
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 629 -
11 BIOSAFETY CABINET( Class II type B2)
BIOSAFETY CABINET( Class II type B2)
1. Biosafety cabinet Class II type B2 with 100% exhaust for cell and tissue culture work.
2. Compliant with standard norms for biological safety, air quality, filtration and electrical safety.
3. Should allow working with agents assigned as BSL – 1& 2.
4. 4 feet wide with internal working area of at least 6 square feet.
5. Programmable microprocessor controlled operation.
6. Single piece stainless steel working tray without
welded joints to collect contamination or rust. 7. Robust dual wall cabinet construction with
negative pressure plenums around the work zone.
8. High performance, long life fan systems (HEPA/ULPA) with efficiency of air filter >99.9%.
9. Average airflow: Inflow – 100fpm or higher, Downflow – 60fpm or higher
10. Low noise level (<60dBA) and vibration free.
11. Adequately illuminated work zone with provision of UV light for decontamination.
12. Digital display for Air flow, UV, etc with timer
function for UV light. 13. Front window/sash should be made of non-
reflecting, laminated safety glass.
14. Should be provided with electrical outlet, water/media and gas inlet.
15. Should have supporting stand with wheels, foot-rest and adjustable lab chair
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 630 -
12 CO2 INCUBATOR
CO2 INCUBATOR
1. System : A system with access port and reversible doors, Alarm for CO2 level and temperature and rounded corners in Inner chambers
2. Contamination control : Preferably by Copper mixed alloy interior chamber with UV light / HEPA Air filter
3. Capacity : 160-225 litres
4. Model/Body : Low profile, stackable
5. Temp. Range : RT + 5ºC to 50ºC
6. 6.Temp. Uniformity : ± 0.3ºC or lesser
7. 7.Temp. Control : ± 0.1ºC or better using
microprocessor based accuracy technology with digital display
8. 8.Humidity : 95% ± 5% RH
9. 9.CO2 Range : 0-20% with accuracy of ±0.2% or
better
10. 10.CO2 Sensor : Infra-red based sensor
11. 11.No. of Shelves : 4 or more 12. 12.Other Feature : The system should have
International QC certification and be supplied with CO2 cylinder
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 631 -
13 SONICATOR
SONICATOR
1. Model should be probe based, compact, benchtop size, programmable and suitable for cell disruption and homogenization.
2. Power rating 500W or higher with working frequency of 20-25 kHz.
3. Piezoelectic based converter with required
converter cable.
4. Amplitude setting range 20% to 100% or better.
5. Programmable timer with adjustable pulse sonication.
6. Efficiency 90% or higher.
7. Supplied with standard probe (with replaceable
tip) along with additional probes for sample volume 0.2ml to 250ml.
8. 8.Digital display for monitoring parameters like
wattage, amplitude and energy.
9. 9.Jack stand, mounting system and sound proof box included.
10. 10.Inbuilt overload protection.
11. 11.Lead free and ROHS compliant.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 632 -
14 SHAKER INCUBATOR (Refrigerated)
SHAKER INCUBATOR (Refrigerated) 1. Model : Refrigerated table top shaker with
provision of stationary tray for incubation of petridish/ culture plates and clamp sets for flask of different sizes (100ml to 2 litre)
2. Body : Exterior : Made of steel 1. Interior : Made of stainless
steel
3. Temperature range : 10ºC - 75ºC or better
4. Temperature accuracy : ± 0.5ºC
5. Shaking Amplitude : 25mm/ 30-350 rpm with ± 2% deviation
6. Tray size : 40 cm X 40 cm or bigger
7. Other features : Accurate PID control for
temperature reliability.
8. Timer and alarm for speed and temperature.
9. Fluorescent lighting and UV for decontamination.
10. Safety device for overload and overheating protection
15 MIXER FOR MOLECULAR ANALYSIS AT VARIED TEMPERATU
MIXER FOR MOLECULAR ANALYSIS AT VARIED TEMPERATURE
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 633 -
RE Bench top model with small footprint with heating, cooling and mixing functions Facility for interchangeable block (with automatic block recognition feature) to accommodate plates and tubes ranging from 0.2ml to 50ml, Touch keypad with digital display of time, temperature and mixing speed, All three parameters to be freely programmable.
Mixing: circular with anti-spill technology for efficient mixing without wetting and contamination in tubes and plates and mixing frequency up to 30000 rpm.
Temperature: Peltier based system, temperature
range from 150C below ambient to 1000C accuracy of ±0.50C at 20-450C, heating rate of at least 60C/minute and cooling rate of 2.50C/minute.
Heated lid to prevent condensation on lid and sides
of the tube.
To be supplied with block for 24x1.5ml Micro Centrifuge tube.
16 AUTOMATED NUCLEIC
ACID WORKSTATI
ON/NA PURIFICATIO
N SYSTEM
AUTOMATED NUCLEIC ACID WORKSTATION/NA PURIFICATION SYSTEM
• Should be a complete compact automated
nucleic acid isolation/purification workstation.
• Should be able to process 8 samples at a
time.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 634 -
• Sample volume 100-1000µl
• Elution volume 50-200µl
• Should able to process broad variety of
samples types including whole blood, blood cells, plasma, fresh or FFPE tissue, body fluids, cultured cells, bacteria, clinical sample. (Should free from cross-contamination &can be used for PCR/RT PCR reaction.)
• Run time should be 20-25 minute or less
according to batch size.
• Should be based on Magnetic bead technology for isolation of Nucleic acid. (DNA/RNA/TNA)
• There should not be use of any manual steps
& no other external device like vacuum pump or tubing/pumps are required.
• Should have preinstalled protocols & no
external program cards are allowed.
• Should have integrated HEPA filter, UV decontamination for less
cross contamination as well as bar code scanning facility for easy sample tracing including tip loss & clot detection.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 635 -
• Should be provided with starter Nucleic acid
(DNA/RNA) purification/isolation kit.
• All international certificates including CE, CB & original software license should be provided.
• Power supply 100-240 vac + /-
10%50/60HZ+/-5%
17 VERTICAL -80°C FREEZER
VERTICAL -80°C FREEZER
1. Temperature range -50°C to -86°C and adjustable with a setting accuracy of +1°C
2. Internal capacity should be minimum 400 litres and should accommodate 15 racks, 240 boxes of 2” height to keep 24000 nos. 2ml vials at least
3. Powder coated solid outer cabinet to prevent corrosion
4. Inner cabinet should be made of oxidation free, rust free and scratch less stainless steel
5. Should have 5 chambers with 4 height adjustable shelves, each chamber should have individual inner door to prevent cold loss
6. Full racks and boxes should be quoted 7. Must maintain -86C° even at ambient temperature of
32°C 8. Pull down time should be < 5 hrs 9. Microprocessor control for operation with integrated
audio visual temperature alarm function with digital monitoring display.
10. Must have auto restart function after power failure with non-volatile memory
11. 11.Should have automatic reset function to protect the microprocessor controller from damage by electrical spikes
12. Battery back for display and alarm during power cut.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 636 -
13. Should provide electronic chart recorder system with integrated alarm and auto-dialer facility. By this, user should be able to access data anytime from anywhere using internet, it should to warn the user about the freezer malfunction through phone and email notification. Historic data recording i.e graph should be viewed by hours, days or months with atleast three months data displayed at one time
14. 14.Heavy duty hermetically sealed two stage compressor ( 4x¾HP) to maintain inner temperature below -86°C
15. 15.Refrigerant should be CFC free 16. 16.Should have space saving foot print (WxD): 80 x
86cm 17. 17.Should have diagnostic software for fault
condition. 18. 18.Should provide C02 back up system with all
necessary set ups i.e CO2 cylinder etc
19. 19.Should have heated air vent to ease the door open during vacuum formation within the chamber
20. 20.Power consumption should be < 8.5kWh/day 21. 21.One fan circulation to lower the noise and power
consumption 22. 22.Insulation should be of 130mm thick with
combination vacuum insulation panel and polyurethane foam. Vacuum insulation should have metal coated polymer film barrier seal to maintain vacuum strongly.
23. 23.Should have lockable castors for free and easy mobility
24. 24.To be operational on 220 to 240 Volts at 50 Hz. Single phase
25. 25.Should have CE and UL certification 26. 26.Should be supplied with compatible voltage
stabilizer
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 637 -
18 Binocular LED Microscope
Binocular LED Microscope
1. Microscope should have Infinity Corrected Optical system for Bright field applications.
2. Microscope should have right hand stage Stand with 4 positions Nosepiece, Universal Power Supply, Mechanical stage with non-extending rack and slide holder, Long life LED Illumination with Auto off facility, built in handle and cord wrap. Dust cover, Manual.
3. Binocular tube with 30° inclination for easy viewing.
4. Magnification from 40X to 1000X with 10 X eyepieces with Objectives of 4x,10x,40x & 100x (OIL)
5. FOV should be 20mm 6. IPD should range from 52mm – 75mm 7. Abbe Condenser 0.9A dry with relevant sliders. 8. Should have integrated vertical handle for easy
carrying & easy lifting with integrated cord wrap to eliminate damage to microscope components.
9. Slide holder should be student friendly to avoid slide chipping.
10. Should have transmitted LED illumination of 6000K temp., 25,000hrs. life at full intensity-providing cool white light with a lifetime of at least 20 years for cost saving
11. Stage should maintain its dimension with round edges eliminating chance of injury with additional protection from friction damage.
12. Preferably AgTreat (anti microbial) to be incorporated for eliminating growth of bacteria
13. Should have time delay shut off automatically to save energy with disabled & enabled option also.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 638 -
19 PLATELET
FUNCTION
ANALYSER
PLATELET FUNCTION ANALYSER
1. Must be suitable for Simple, rapid and precise assessment of platelet function
2. Accurate detection of inherited, acquired or induced platelet dysfunction
3. Detect vWD 4. Detect platelet P2Y12 receptor blockades in
patient undergoing therapy with P2Y12 receptor antagonist
5. Start up reagent and cartridge for 100 tests 6.Test system Principle: High-shear force dynamic flow system • Measuring channel: Single measuring channel • Incubation category: Two incubation wells • Incubation temperature: 37.9 °C ± 1.0 °C • Incubation warm-up time: < 15 minutes (room to operating temperature) • Trigger solution: Illuminated trigger solution viewing area 7. Sample Handling • Type of sample: Citrated whole blood • Sample mechanism: Manual pipette dispensing (800 μL) • Barcode identification: external barcode reader for sample identification 8. Reagent Handling • Type: Single disposable self-contained test cartridges • Reagent recognition: Positive optical coding reagent cartridge identification • Additional reagent: Trigger solution
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 639 -
9. Throughput • Single test: P2Y, Col/EPI, or Col/ADP: 6 tests/hour • Duplicate test: Col/EPI or Col/ADP: 10 tests/hour 10.Software • Interface: Color LCD touchscreen • Host connection: Unidirectional, external RS-232 DB-9 port or ethernet network • Stored patient results, control results, and maintenance events: Last 1,000 results • USB port: Software updates, printer, barcode scanner,and result export • Quality control: Built in • Onboard help • Instrumentation status: Clear status messages (red, yellow, and green) 11. Power Supply • Operating voltage: 100 – 240 VAC • Main frequency: 50 – 60 Hz • Current (maximum): 1.38 A @ 90 VAC 12.Environmental Conditions • Operating temperature: 18 °C – 29 °C • Non-operating storage: -29 °C – 50 °C • Relative humidity: 20 – 90 % • Operating humidity: 20 – 90 % RH (non-condensing) • Non-operating storage humidity: 0 – 95 % RH (non-condensing) • Degree of protection: according to IEC 60529 • Heat emission: 94 kcal/h (375 BTU/h) 13. Online UPS with 30 minutes backup
20 BLOCK
CABINET
BLOCK CABINET
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 640 -
1. Made of CRC sheet duly powder coated.
2. Should have index card holder and handle
for each drawer.
3. Should be provided with lock and key
4. Capacity 20000 blocks
21 SLIDE
CABINET
SLIDE CABINET
1. For placing slides in horizontal manner
2. For safe and easy handling of 75 × 25 mm
slides.
3. Made of mild steel sheet.
4. Well designed for performance and
durability.
5. Powder coated paint outer finish with
smoothly working doors fitted with handle,
lock and key.
6. The anodized aluminium slide strays for
holding 75 × 25 mm slides, have been
arranged separately so as not to disturb
other compartments while taking out or
putting in the slides.
7. The size of the tray approx 350 × 210 × 35
mm and nicely fitted with uniformly slotted
aluminium carrier each holding slides in
horizontal position.
8. Fitted with index card holder.
9. Capacity 20000 slides.
22 UV Sterilization
cabinet
UV Sterilization cabinet
1. Destroys unwanted PCR products in less than 30 minutes
2. Built in timer control 3. Protects the sample from user
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 641 -
contamination 4. Protects the user from Biohazard samples 5. Four powerful, timer controlled UV tubes,
combined with optimal reflectors, provide
efficient irradiation of the complete work surface
6. Doors equipped with safety cutouts 7. To be provided with safety trays and easy
to clean tray liners 8. Safety interlocks on the cabinet doors
prevents the user from any exposure to the
UV light 9. To be provided with required accessories
such as height adjustable stool, etc
23 Micro Centrifuge for
0.2ml PCR tubes
Micro Centrifuge for 0.2ml PCR tubes
1. Quiet and reliable. 2. Small foot print. 3. Independent on/off switch 4. 2 place rotor for 8x0.2 ml tubes 5. 6 place rotor for 1.5ml tubes 6. Fixed speed of 6000rpm/2000g
24 Micro Centrifuge for 1.5 ml/0.5ml PCR Tubes
Micro Centrifuge for 1.5 ml/0.5ml PCR Tubes
1. Quiet and Reliable
2. Small foot print 3. Built in power supply 4. Digital display of time and speed
5. Standard 6 place rotor for 1.5 ml tubes
6. Spare 12 places rotor for 0.5 ml tubes
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 642 -
25 Vertical
Laminar
Air Flow
Cabinet
Vertical Laminar Air Flow
Cabinet 1. Inner work surface width a minimum of 2
feet for easy handling of samples 2. Laminar Air Flow Cabinet should be tested
for cross-contamination and product
protection using microbiological test methods specified in EN12469.
3. Sentinel Microprocessor-Based Control &
Alarm System 4. ISO Class 4 Air Cleanliness 5. Front Sliding sash
6. Cabinet Construction a. Main Body : 1.2 mm / 0.05”/ 18
gauge electro-galvanised steel with white oven-baked epoxy powder-coated finish
b. Work Zone : 1.2 mm (0.05") 18 gauge Stainless Steel, grade 304, 4B
finish. Single piece stainless steel work surface with a curved front edge for maximum operator comfort
12.Side Walls : Colourless and Transparent UV absorbing tempered glass to enhance
visibility inside the work area. 7)Raised Front edge.
8)Temperature compensated Air velocity sensor.
9)HEPA Filter Typical efficiency - 99.99 % for particles size at 0.3 microns.
10)Additional disposable pre-filter with 80 %
arrestance to trap large particles in the inflow air prior to reaching the main filter, protecting against damage and prolonging filter life.
11)External surfaces should be powder coated
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 643 -
with Isocide Anti-microbial coating to eliminate
99.9 % of surface bacteria within 24 hours of exposure.
12)Permanently lubricated, high performance, energy efficient, centrifugal motor/fans. less
electrical energy consumption. Completely integrated assembly to optimize motor cooling. All
rotating parts should be balanced for smooth, quiet and vibration-free operation.
13)Sound Emission : < 61 dBA as per IEST-RP-CC002.2
14)Electrical 220-240V, AC.
15)To be provided with additional accessories- IV. Support stand with adjustable height.
V. UV lamp for decontamination. VI. Ergonomic height adjustable Lab chair.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 644 -
SL.
NO. NAME OF EQUIPMENT
& INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
Consumables & Accessories
Unit Cost For each item
Expected life of
the equipm
ent
CMC rates for Post-Warranty
next 5 consecutive years
26 Class II Biological
Safety Cabinet Type A2
Class II Biological Safety Cabinet Type A2
1. Size atleast 1.2 X 0.6 X 0.6 meters
2. EN 12469 Certified 3. Recirculation 70% & Exhaust 30%
4. Average Air Flow Velocity: (3) Inflow : 0.45 m/s (90 fpm) at
initial setpoint, audible/visual
alarm should activate at 0.40 m/s (80 fpm)
(4) Downflow : 0.30 m/s (60 fpm) at initial setpoint with uniformity of
better than +/- 20% 5. Noise Level < 62 dBA according to
EN 12469
6. Cabinet Construction: (2) Main Body: 1.2 mm (0.06") 16
gauge electrogalvanized steel with white oven-baked epoxy antimicrobial powder coated finish
Work Zone: 1.5 mm (0.06") 16 gauge stainless steel, type 304,
with 4B finish Interior work area formed from a single piece of stainless steel with large radius
corners to simplify cleaning. 7. ULPA filters with efficiency greater
than 99.999 % for superior operator
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 645 -
and product protection
8. Standard Compliance : 1. Filter performance - IEST-RP-CC034.1,
IEST-RP-CC007.1, IEST-RP
2. Electrical Safety - IEC 61010-1 / EN 61010-1 / UL 3101-1 / hsirig, CSA C22.2
No. 1010.1-92 3. ISO Class 3 air cleanliness in work zone.
9. Negative pressure plenum should surround contaminated positive pressure plenum for quiet,
uniform airflow 10. Microprocessor Control with temperature compensated airflow sensor for supervising all
cabinet functions.
11. Antimicrobial coating on all painted surfaces to protect against surface contamination.
12. Advanced separatorless mini-pleated ULPA
filters tested to > 99.999% efficiency for 0.1 - 0.3 micron particulates.
13. Digital read-out with alpha-numeric display
should indicate all input, status and alarm functions.
14.The cabinet work zone should not have
welded joints to collect contaminants or rust.
15.Blower should be Electronically Commutated Motor (ECM)
16. A recessed central area and stainless steel
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 646 -
drain pan channels for preventing liquids from
entering the lower filtration and blower systems
17.Angled viewing window and narrow profile front grille to improve reach into the work area
18.Front armrest raised above the work zone to
improve comfort and to ensure no airflow blockage
19.Frameless, shatterproof sash for easier cleaning, and for larger, unobstructed viewing
area
20.The Biological Safety Cabinet Should be individually tested, documented by serial number
and validated with the following test methods. 21.Inflow / downflow velocity PAO Aerosol
challenge for filter integrity Light, noise and vibration Airflow pattern visualization Electrical safety to IEC61010-1
22.Electrical 220-240V, AC, 23.To be provided with additional accessories-
(a) UV Lamp (b) Ergonomic height adjustable chair.
27 Vortex
Mixer
Vortex Mixer 1. 1200 rpm 2. 220/230 V AC
3. Size 12” × 12”
28 Water
Bath
Water Bath 1. Double walled made of stainless steel.
2. Outer wall powder coated 3. Space between double walls is filled with
glass wool for insulation
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 647 -
4. Provided with drain plug for easy emptying
5. Reliable immersion heating elements 6. Thermostat controlled temperature from
ambient to 100 degree Celsius +/- 0.5
7. Digital Display of temperature with appropriate regulators, on /off switch,
alarm 8. Suitable to operate on 220 V AC supply 9. To be provided with accessories
1. Stirrer with S/S rods and blades
2. Test tube racks of S/S
29 Single channel micropipette
Single channel micropipette 1. Single channel variable volume 0.1µl-
2/2.5/5 µl
2. Systematic error should not be more than 3% at minimum volume and 1% at maximum
volume 3. Minimum resolution of volume 0.001µl 4. Easy digital volume setting
5. Enhanced UV resistance 6. Precise reproducibility for long hours
7. Tip ejection automatic 8. User technical manual to be supplied in
English
9. Certificate of calibration and inspection should be provided
10. Spare parts and accessories to be provided with pipettes.
11. Should provide compatible stands
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 648 -
SL.
NO. NAME OF EQUIPMENT
& INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
Consumables & Accessories
Unit Cost For each
item
Expected life of
the equipm
ent
CMC rates for
Post-Warranty next
5 consecu
tive years
Department of Pathology(For ESIC HOSPITAL, JOKA & Manicktala)
1 FULLY AUTOMATED SLIDE PREPARATION SYSTEM
FULLY AUTOMATED SLIDE PREPARATION SYSTEM
1. The system must be walk away fully Automated
Slide Preparation system to process slides for Immuno Histo Chemistry, In Situ Hybridization, Silver In Situ Hybridization ,Immuno Fluroscence and should be able to process IHC with IVD approved p16 antibody for the stage detection of cervical cancer.
2. There should be options for varying temperature and incubation time.
3. The system must be fully automated to do baking, deparaffinization, antigen retrieval and staining within the same system .
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 649 -
4. The System should be open for Primary antibodies.
5. The system should be able to generate fully prepared 60 IHC Slides in a 9-10 hour shift.
6. The system must have individual Slide heaters for all the slide positions,slide temperature should be individually controlled.
7. The system should have a mechanism which will
be able to control evaporation and protect tissue integrity on each slides.
8. The reagents and the antibody should get mixed through air whirlpool and no mechanical part should be involved for mixing the reagents and antibodies.
9. Only 100 micro litre of Primary antibody must be required for all types of slides irrespective of the size of the tissue section.
10. There should be free supply of reagents, buffer s and DAB for the first 200 Slides.
11. The system should be able to recognize Slide Specific Barcode label which would provide automatic programming, patient and case
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 650 -
identification.
12. The system should be US FDA certified.
14. Online UPS must be provided with minimum one hour back.
14.The system should have compatible computer and software of latest technology available during installation. The software should be upgradable.
2 Fully Automated
Urine Analyzer
Fully Automated Urine Analyzer 1. Random access system for physical, chemical and
sediment analysis on urine specimens.
2. Multiparameter Chemistry analysis of at least 10
parameters including:
a. Specific gravity
b. pH
c. Albumin
d. Glucose
e. Ketone Bodies
f. Bilirubin
g. Urobilinogen
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 651 -
h. Blood/Hemoglobin
i. Micro albumin
j. Nitrite
3. Analysis of standard urinary sediments consisting of
different cells, casts and crystals.
4. Throughput-60/hour including sediment analysis in
random access mode.
5. Microprocessor based photometric analysis of
chemical parameters and flat flow cell technology
with high speed and 800-1000 frame imaging for
sediment analysis.
6. Interconnected parallel pc with appropriate soft
ware for –
Retrival of analysis data
Display of analysis data
Image display of formed elements
Storage of data of results and others atleast
10,000 in number
7. Bar coded facility for reagent and sample
identification
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 652 -
8. Laser colored printing of results and data
9. Power back up with UPS for at least 2 hours
10. Accessories
a. Sample rack to hold 50 samples-05
b. Reagents for start up- 1000 analysis
c. International certification for medical equipments
3 Bone decalcifier
automated,
electrolytic
decalfication system
Bone decalcifier automated, electrolytic decalfication system, holding capacity for 30 cassettes and at least 700ml decalcifying solution, digitally controlled.
4 LBC Specifications for LBC
1. Automated system for processing of Gynaecological and non- gynaecological cytology samples for liquid based cytology along with automated stainer.
2. Should have ability to make single slides which is uniform and reproducible.
3. Should have a controlled membrane transfer technology to make a thin smear with uniform distribution of cells.
4. System should allow residual material to be used for ancillary testing such as HPV, CT/NG, Immunocytochemistry, Special Stains, cell blocks etc.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 653 -
5. Should have an automated slide stainer with an
ability to run at least 30 slides in half an hour. 6. UPS with two hour power backup. 7. CE certificate
Accessories:
1. Microscopic slides- 2 boxes of 100 slides 2. Filter- 2 box to process 200 samples 3. Solution -2 box to process 200 samples 4. Preservative solution -2 box to process 200
samples 5. Staining kit for staining at least 200 smears 6. All the standard accessories to be provided with
the equipment.
5 Patient and data
management
system
Patient and data management system for laboratory services
1. Fast processing system with high end security having
several different modules for patient and data
management of the laboratories.
2. Should have the ability to generate unique
identification number of the patient starting from
lab registration, sample collection, testing and
report delivery with generation of bar code id, and
stickers.
3. An integrated token system for the patients while
waiting for sample collection.
4. Computer with bar code reader in registration,
sample collection, different labs ( clinical pathology,
Cytopathology, hematology, histopathology,
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 654 -
different sections of biochemistry and microbiology)
5. Easy to operate
6. Ability to store data of at least 5000 patients per
day.
7. Data to be accessible on mobile, laptop, tablets etc
and the ability to deliver SMS to target
people(patients as well as doctors).
8. Result modification before final report delivery.
9. Can be integrated with other automated lab
equipments.
10. New features can be upgraded time to time as per
requirements
11. Accessories for the system to be supplied along with
the software.
6 Automated Cover Slipper
Automated Cover Slipper 1. Fully automated unit with a through
put of 400 slides/hr. at least
2. Should be compatible with different
sizes and thickness of cover slip as
written below.
3. Size – 40mm, 50mm, 55mm, 60mm.
4. Thickness – 0.13 – 0.17mm.
5. Should be compatible with different
solvent like xylene, d-limonene and
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 655 -
aliphatic hydrocarban –based
substitute and mounting medium like
DPX etc.
6. Should be able to handle both histology
and cytology sample simultaneously.
7. Should have an in-built filter to remove
any vapors or fumes.
8. Easy to operate with different program
setting and a touch screen panel.
9. Should be able to accept slides from
different automated slide stains.
10.UPS for 1hours back up.
11.International CE certification for
medical equipment.
Accessories – 1. Cover slips of different sizes &
thickness – 500 each.
2. Dust cover.
3. Standard accessories with the main
equipment.
7 Human morbid tissue
Specification for human morbid tissue materials
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 656 -
materials
Cardio-Vascular Mitral stenosis Atheroma aorta Lt. ventricular hypertrophy Fibrinous pericarditis Dilated Cardiomyopathy Infective endocarditis
Respiratory Lobar pneumonia Bronchiectasis Emphysema Pulmonary Tuberculosis fibrocaseous & miliary Bronchogenic carcinoma Silicosis Bysinosis
Gastro-Intestinal Peptic ulcer Typhoid ulcer of S.I.
Renal Granular contracted kidney Large white kidney Hydronephrosis Renal cell carcinoma Renal stone
Vascular Syphilitic Aortits
Bone Osteomyelitis-sequestrum TB spine Osteogenic sarcoma Giant cell tumor
Female Genital Fibroid uterus Carcinoma cervix
Hepato-Biliary Micro-nodular cirrhosis Fatty liver Metastatic liver HCC
Female Breast Carcinoma breast
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 657 -
Male Genital Carcinoma Penis Seminoma of testis Benign hyperplasia of Prostate
Lymph Node TB Lymph Node Hodgkins LN
8 GROSSING TABLE WITH BIOSAFETY HOOD
1. Should be of High-quality stainless steel construction with Formalin container and height adjustment via electro hydraulic mechanism.
2. Vacuum breaker-protected water supply 3. Ventilation system with Two
options(outside source or inbuilt) 4. Large sink with mixing faucet 5. Ample lighting 6. Magnetic instrument holder 7. Washable dissecting board 8. Must have Service centre in Kolkata
9. Accessories to be provided with Grossing Station:
Grossing board to accommodate a wide range of
tissue types. Should have two adjustable wells to ensure grossing to an exact thickness
Integrated rulers on the standard and large boards
to enable gross measurement of specimens. Trimming knives and scalpel blades to provide the
sharp cuts necessary for exact grossing techniques.
Tissue tampers for allowing a firm hold on specimens while making horizontal cuts.
2-4 grossing forks designed to hold specimens including fragile tissue and any specimens with layers, while maintaining perfect specimen form
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 658 -
and integrity. Dust cover Dictating unit with microphone UPS 1.0 KVA Integrated imaging system Infrared control.
9 GROSSING STATION
Item: : Histopathological Grossing table / Grossing Station elevated floor model with Electrical and mechanical controls with UPS 1.0 KVA . Details: 1. Cutting board with black viewing surface, to accommodate a wide range of tissue types. Should have two adjustable wells to ensure grossing to an exact thickness. 2. Connecting tubes for water supply and drainage.
3. Sprinkler system for easy cleaning of the working
area.
4. Specimen safe drain system.
5. Fine grating S.S. sink.
6. Electronic scale upto 2000g at least.
7. Integrated S.S. rulers in cm / mm scale on the standard and large boards. 8. Light tubes and adjustable spot lights.
9. Filtration system to suck-off polluted air, with easily Replaceable filter, alum oxide. 10. Magnifying Glass with long handle (flexible).
11. Separate metal table for grossing with drawers.
12. Formalin Container.
13. Dictating Unit with microphone and controlling unit & foot switch
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 659 -
Essential Accessories must be supplied with the
main consignment
Trimming knives and scalpel blades to provide the sharp cuts necessary for exact grossing techniques.
Tissue tampers for allowing a firm hold on specimens while making horizontal cuts.
2-4 grossing forks designed to hold specimens including fragile tissue and any specimens with layers, while maintaining perfect specimen form and integrity.
Protective Dust Cover UPS 1.0 KVA Capacity
10 LABORATORY MICROWAVE PROCESSOR SYSTEM FOR ENZYME RETRIEVAL
Nomenclature: Laboratory Microwave Processor System for Enzyme Retrieval Table- top Model 20 to 30 Litre capacity. Description: Table-top model, capacity 20-30 Litre, convection mode, S.S. body, preferably ceramic enamel inner wall, programmable digital temperature controller and display within a range of 40°C to 108°C, built-in temperature probe, automatically controlled programmable timer setting and digital display, wattage level 800 - 1000 watt : MW leakage proof design, overheating prevented design, audible alarm with user adjustable time delays, throughput of 80 – 100 slides per run, dewaxing, rehydration and antigen retrieval in approximately 30 minutes,IEC/CE/ISO Certified model.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 660 -
Essential Accessories : 9. Compatible Plastic Rack for
holding slides: 5 (five) numbers 10. MW compatible specimen
containers assorted sizes: 5 (five) numbers
11. U.P.S. 1 KVA: 1 (one)Number 12. Operator’s Guide
11 pH METER DIGITAL
Nomenclature : pH Meter digital pen type. ( Minor variation of quoted specification may be accepted within a short range as available in the market nearest to the requirement of the consignor) Principle: Microprocessor controlled pen type equipment.
pH range: 0 – 14 pH Units.
mV range: 0 to ± 1999 mV.
Resolution: 0.01 pH; 1 mV. Accuracy: ±0.01 pH ± 1 digit; ± mV ± 1 digit Operating temperature: 10˚C to 50˚C.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 661 -
Operating Panel & Display: Panel for different functions with digital LED Display.
12 AUTOMATIC PRECISION
MICROBALANCE
Nomenclature: Electronic precision weighing balance 150g (approx) with display and UPS. (Variation of capacity may be accepted within a short range available in the market nearest to the requirement of the consignor) Description : Electronic precision microbalance with chemical and moisture proof stainless steel top-fitted weighing surface; LCD display panel and control panel; interfaced peripheral printer with key-panel; functional for piece counting, % weighing and dynamic weighing; provision of display of weight in mg / gm must be there; easy calibration, cleaning and maintenance; to be supplied with full documentation of precision & accuracy certificate. Power cord Indian type. Capacity: Maximum capacity : Approx. 150 g Readability : 0.01 g Repeatability : 0.01 g Linearity : ± 0.02 g ( at ambient temperature)
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 662 -
Essential Accessories must be supplied with the main consignment & committed in the bid 1. Calibration weight. 2. Protective cover.
13 Hot plates electric with digital temperature controller, temperature range upto 300°C, heat-proof powder coated cast iron top, spiral heaters, thermostatic heat control
14 Electric Vacuum Embedding Bath
______________________
15 Distilled Water Still
(Deionizer), removal of inorganic and organic ions, dissolved particles, microorganisms, etc., with vacuum system, analytical grade water purification & electro-deionization system, multi-stage (prefiltration, particle clearing, reverse osmosis, electro-deionization and ultra-violet purification) with display and self performance check, connectivity to data management system/ PC with printer for traceability of water quality
16 Band Saw all S.S. 8 cm with rounded ends electric
Maximum job height 200mm, maximum throat 200mm, approx table dimension 600x600mm, blade size approx 3500x30x1.0 mm(thickness), blade speed 20 to 100 m per min, with saw and coolant motor
17 Staining Racks S.S. horizontal with handle cradle type for 10 slides/ 20 slides
18 Precision Chemical Balance
Precision Chemical Balance with assorted precision brass weights 1mg to 200g,
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 663 -
19 Laboratory Counter Laboratory Counter Clay-Adams 9 keys spring loaded, including eight individual counting keys and one totalizer heavy duty metallic body, good visibility of rotating digits, digit range 0 to 100 for each, audible alarm at 100 count in total,. Options for counting of cell, simple computation and percentage counting. Individual key counting limit of 999 cells. Bilateral sturdy resetting knobs.
20 Automatic Timer Clock Digital
Automatic Timer Clock Digital with Split and Lap timer, range upto 3 hours
21 Bone Saw 8 inches blade rounded point
Bone Saw 8 inches blade rounded point, high carbon steel blade to withstand 70°C temperature of friction, sharp cutting edges of teeth, ergonomic handle design
22 Drill for boring glass
______________
23 Blow piece with bellow for bending glass
_____________
24 Sternal Puncture
Needle Sternal Puncture Needle (Klima and Salah type)Heavy duty stainless steel made, with total assembly comprising of aspiration needle with adjustable guard and trocar, Size:15G, 1 7/8inches Adult size
25 Sternal Puncture
Needle Sternal Puncture Needle(Klima and Salah type) Heavy duty stainless steel made, with total assembly comprising of aspiration needle with adjustable guard and trocar, Size: 18G, 1 ½ inches Child size
26 Liver Biopsy _____________
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 664 -
Needle Trucut needle s.s.
27 Box weight analytical
______________
28 Stop watch digital with LED/LCD display reading at 1/5 display
_____________
29 Ultra-violet lamp table top model
_____________
30 Surgical Instruments assorted
Surgical Instruments assorted
Autopsy knife blade 100mm with handle
Autopsy knife blade 170mm with handle
Autopsy knife blade 325mm with handle
Dissecting scalpel blade curved tip with handle
Dissecting scalpel blade pointed tip with handle
Forceps Artery 7.5 inch
Forceps Cartilage Curved 5 inches
Forceps Cartilage Straight 5 inches
Forceps dissecting plain serrated jaws broad tip 5.5.inches
Forceps dissecting plain serrated jaws broad tip
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 665 -
7.5.inches
Forceps dissecting plain serrated jaws Fine tip 5.5.inches
Forceps Iris
Forceps Sinus
Forceps Specimen
Forceps Tissue 5 inches
Forceps Tissue 8 inches
Knife Professional 250x20mm
Knife Senior 225x25mm
Mallet S.S.
Needle Teasing S.S.
Probe Curved end S.S.
Probe Straight S.S.
Scissors Angle Fine Pointed Dissecting 4.5 inches
Scissors Fine Pointed Curved 5.5 inches
Scissors Fine Pointed Straight 4.5 inches
Scissors Mayo Dissecting Curved 5.5 inches
Scissors Mayo Dissecting Straight 5.5 inches
Scissors Mayo Dissecting Straight 9 inches
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 666 -
Scissors Surgical Curved blunt/sharp point5.5 inches
Scissors Surgical Straight blunt/blunt
Scissors Surgical Straight sharp/sharp
Speculum Nasal
Sponge Holder
Surgical blade holder 6 inches
Trimming knife blade 130mm with handle
Trimming knife blade 260mm with handle
31 Dark Room Lamp __________________
32 Deep Pan S.S. __________________
33 Paraffin Pouring Pitcher with long spout and heat resistant handle S.S.
__________________
34 Sampling scoop S.S.
__________________
35 Sampling spatula S.S. 6 inches
__________________
36 Sampling spatula S.S. 10 inches
__________________
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 667 -
37 Funnel S.S. dia 10mm/4 inches
__________________
38 Funnel S.S. dia 15mm/6 inches
__________________
39 Microtome Knife Carbon steel Profile C 120 mm
__________________
40 Microtome Knife Holder with handle
__________________
41 Belgian Hone Best quality
__________________
42 Leather Strop superfine quality double sided
__________________
43 Knife Sharpener automatic
__________________
44 Post-mortem set
Autopsy knife blade 100mm with handle
Autopsy knife blade 170mm with handle
Autopsy knife
__________________
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 668 -
blade 325mm with handle
Calipers
Curettes
Cuscoe’s speculum
Dilators
Enterotomes and viscerotomes
Forceps Artery 7.5 inch
Forceps Cartilage Curved 5 inches
Forceps Cartilage Straight 5 inches
Forceps dissecting plain serrated jaws broad tip 5.5.inches
Forceps dissecting plain serrated jaws broad tip 7.5.inches
Forceps dissecting plain serrated jaws Fine tip 5.5.inches
Forceps Iris
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 669 -
Forceps Sinus
Forceps Specimen
Irrigation device
Kidney tray 8 inches
Knife Brain
Knife Cartilage
Knife Professional
Knife Resection
Metallic ruler tape flexible
Nasal speculum
Needle holders
Retractors
Rib shears
Scalpels assorted sizes
Scissors Angle Fine Pointed Dissecting 4.5 inches
Scissors Dissecting
Scissors Fine
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 670 -
Pointed Curved 5.5 inches
Scissors Fine Pointed Straight 4.5 inches
Scissors Iris
Scissors Mayo Dissecting Curved 5.5 inches
Scissors Mayo Dissecting Straight 5.5 inches
Scissors Mayo Dissecting Straight 9 inches
Scissors Metzenbaum
Scissors Surgical Curved blunt/sharp point5.5 inches
Scissors Surgical Straight blunt/blunt
Scissors Surgical Straight sharp/sharp
Sternal Saw
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 671 -
Stryker Skull Saw
Surgical staplerwith reloadable staple cartridges
Tenaculum
Towel forceps
Tray 12 x 12 inches
Tray 12 x 18 inches
Trocars
45 Bone marrow Biopsy Needle Jamshidi Type Heavy duty stainless steel made two piece, with light weight T-Handle streamlined and ergonomic design, trocar with tapered stylet point and triple crowned cannula tip.Adult type, 11G, Stainless steel instrument tray with lid 8 inches x 8 inches
__________________
46 Bone marrow Biopsy Needle Jamshidi Type Heavy duty
__________________
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 672 -
stainless steel made two piece, with light weight T-Handle streamlined and ergonomic design, trocar with tapered stylet point and triple crowned cannula tip.Pediatric type, 13G, Stainless steel instrument tray with lid 8 inches x 8 inches
47 Test tube rack HDPE 30positions
__________________
48 Bone decalcifier electric
__________________
49 Class II Biosafety
Laminar
Power supply: 440 V,AC, 3 Phase Material of Construction: SS 304 Motor : Supply: 0.5 HP: 1440 RPM: 1-0, 230 V AC: 50 Hz Exhaust: 2 HP 2800 RPM Blower (Impeller) : Supply: 210 x 117 Wmm Exhaust : ---- Dimensions: (W x D X H): 1060 x 1040 x 2150(Approximate) Bioclean work space: 877 x 660 x 610 Filters (W x D X H): Pre filter: size : 305 x 380 x 45 Fresh Air Filter: Type: EU-6 Intermediate: Size: 915 x 610 x 45
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 673 -
Type: EU-13 Final Filter: Size: 915 x 610 x 75 (ANTIMICROBIAL) Type: EU-13 Intermediate: Size: 915 x 610 x 100 (ANTIMICROBIAL) Type: EU-13 Exhaust filter: Size: 915 x 457 x 100 Type: EU-13 Differential pressure gauge : Magnehelic pressure gauge Across HEPA filter wrt. ambient: 0-25 mm Across work space wrt. ambient: 0-10 mm Illumination: UV light: 1.5' L & 30W FLU light: 1.5' L & 20W Special features: Virus burnout system
50 Homogenizer with
two probes
Homogenizer with two probes
Small dispersing instrument for volumes from 0.1-100 ml Quick-connect coupling for probes Stainless steel probes Option of using with plastic disposable dispersing elements • High performance drive Probe for volume Range (H20): 0.1 to 10 mL, 1-100 ml Speed Range: 8000 to 30,000rpm Maximum Viscosity (cps): 20000 Preferably built-speed control Use Options: Handheld or stand-mounted Motor: 125w Noise Level: 65dB or less Overload Protection: Yes Should be supplied with all the accessories like Stand, boss clamp, clamp etc
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 674 -
SL.
NO. NAME OF EQUIPMENT
& INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
Consumables & Accessories
Unit Cost For each
item
Expected life of
the equipm
ent
CMC rates for
Post-Warranty next
5 consecu
tive years
CLINICAL LABORATORY (For ESI-PGIMSR, JOKA)
51 Sedimentation apparatus Westergren with
Sedimentation apparatus Westergren with
1. metallic rack with spring-loaded pipette holder and round base with rubber cushion, provided with spirit level 5 station
2. Glass Westergren pipettes, class A glass with precision etched and printed marks and ground lower end and smooth rounded top end : 5 (Five) tubes
3. Pipette filler for Westergren tube : 1 (One) No.
52 Sedimentation apparatus Wintrobe
Sedimentation apparatus Wintrobe with
1. metallic rack with screw adjusted pipette holder and round base with rubber cushion 5 station
2. Glass Wintrobe’s tubes, class A glass with precision etched and printed marks in mm in both ascending and descending order, polished and rounded opening : 5 (Five) tubes
3. Glass Landau’s tubes, class A glass with bulb and precision etched and printed marks at 0 to 50 mm : 5 (Five) tubes
4. Filling pipette with long stem and rubber teat : 5(Five) No.s
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 675 -
53 Urinometer precision glass with mercury bulb and graduated stem with temperature mark
___________________
54 Albuminometer Esbach’s Corning glass with precision marking with corrosion-resistant rubber stopper in wooden/polymer case
_________________
55 Crucible with pestle chinaware tough quality
_________________
56 Crucible Gooch with adaptor
_________________
57 Balance sensitive electronic precision weighing balance 2000g (approx) with display and UPS.
Electronic precision balance with chemical and moisture proof stainless steel top-fitted weighing
_________________
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 676 -
surface; LCD display panel and control panel; interfaced peripheral printer with key-panel; functional for piece counting, % weighing and dynamic weighing; provision of display of weight in mg / gm must be there; easy calibration, cleaning and maintenance; to be supplied with full documentation of precision & accuracy certificate. Maximum capacity: Approx. 12000g Readability : 0.1g Repeatability : 0.1g Linearity : ± 0.3g (at ambient temperature) Essential Accessories 1. UPS of capacity 0.5 KVA. 2. Power cord Indian type.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 677 -
3. Extension cable 5m. 4. Calibration weight. 5. Protective cover.
58 Balance chemical with fractional weights.
Balance chemical with fractional weights.
Conventional chemical balance , corrosion and rust prevented metallic body resistant to expansion on heat; corrosion prevented balance pivot wedges; rust and corrosive-chemical resistant stainless steel double weighing pans; zeroing mechanism; side opening glass cabinet with base screws.
Weight box holding calibrated brass fractional weights resistant to rust and sulfation; provided with forceps.
Weight range 1 mg to 200 g.
59 Test tube rack HDPE 10 positions
60 Spectrophotometer
Spectrophotometer
Analysis Option: a. Absorbance
b. 1 point end linear & non linear.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 678 -
c. 2 point end linear & non linear.
d. Rate linear & non linear.
e. Immunoturbidimetry.
Light Sources: Pre aligned Quartz halogen lamp.
Wave Length: Automatically Selectable narrow band interference quartz filter within wavelength of 340 -700 nm -- fixed seven or eight filters and two optional filters as per users choice.
Measurement Time : Selectable.
Cuvette a. Flow cell Cuvette.
b. External rectangular Cuvette.
Cuvette Temperature: Peltier control & programmable at 25˚C, 30˚C and 37˚C.
Aspiration System: Motor driven pump.
Aspiration Volume Programmable.
Cuvette Blanking: Automatic.
Programmable Parameter: About 100 user defined test programs including routine biochemical parameters, enzymes, immunological markers, truly open system,
selection through key- board.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 679 -
Calibration: Automatic against standard / calibration.
Quality control: a. 2 levels of control (at least)
b. Levey - Jennings diagram.
c. Manual entry of QC
Memory Storage: a. Minimum 200 patients result.
b. Calibration result.
c. Quality control result for 01 month.
Display:
a. Graphic LCD.
b. Display of reaction curve, absorbance, temperature.
c. Display of result of real time.
d. Graphical display of reaction time.
e. Calibration curve graphical display.
Key board:
a. Chemical and moisture prevented single touch alphanumeric membrane key panel.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 680 -
Printer:
a. Built in thermal printer with full graphic facility.
b. Parallel full page ink printer with formatting options.
Reporting format: a. Conventional
b.SI unit(Optional/Interconvertible).
Recalculation : Recalculation of result following modification of calibration, measurement timings and wavelength.
Automatic Flagging: a. Absorbance and linearity cheek.
b. Reagent stability.
c. Substrate depletion.
Peripheral interfacing: a. Parallel ports for external printer , key- board and PC. Software PC Compatible.
Power Cord Indian Type 3-pin power cord locally available and replaceable .
Dust Cover Washable dust-covers for main unit and key-board, etc.
Working Manual Working Manual in original
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 681 -
61 Lumbar puncture needle s.s.
____________________
62 VOLUME DISPENSER
Nomenclature:Volume Dispenser Automatic. Type : Inert amber colored glass bottle reservoir with bottle top Ball-valve polymer pump graduated for variable volume adjustments, autoclavable, corrosion resistant . Capacity: Reservoir capacity 1000 ml.
Bottle top dispenser pump capacity 0 – 5.0 ml. with increments of 0.1 ml
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 682 -
SL. NO.
NAME OF EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
Consumables & Accessories
Unit Cost For each item
Expected life of the equipmen
t
CMC rates for Post-Warranty
next 5 consecutive years
Department of BLOOD BANK (For ESIC HOSPITAL, JOKA)
1 ULTRA LOW TEMPERATURE LAB DEEP FREEZER
ULTRA LOW TEMPERATURE LAB DEEP FREEZER Nomenclature : Laboratory deep freezer floor model electrically operated, capacity of approx 550 L- 600 L ( Variation of capacity may be accepted within a short range available in the market nearest to the requirement of the consignor) Principle: Electrically operated vertical floor model with ultra cooling device, stainless steel interior, 4-5 replaceable storage compartment with stainless steel racks, temperature selector and Temperature Controller, eye- level display and temperature recorder, gasket sealing system to avoid ice formation, calibration mode should be built-in with the system and lock system in door.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 683 -
Temp. range: Selectable range from -400 C to - 80˚C.
Operating Panel & Display: Button/ switch panel for different functions and programmes,viz, start, stop, temperature control, temperature and time setting with LED Display. Battery backup for alarm & display. Display of set and actual running values. Alarm: Acoustic Signal for over or under-temperature, improper locking of door(optional), or error. Essential Accessories must be supplied with the main consignment & committed in the bid 1. Thermometer. 2. UPS 2.0 KVA. 3. Power cord Indian type. 4. Storage boxes.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 684 -
2 Automated Immunohem
atology detection system
Specification Automated Immunohematology detection
system by Gel Card Technology. 1. Semi-automated immunohematology analyzer
incorporated with centrifugation, reading and interpretation abilities for the tests performs by the column agglutination technology for transfusion related cross matching on anti human globulin and enzyme phase (to detect both IgG & IgM antibodies), blood grouping, partial Rh-D typing, antibody screening &identification in a single step.
2. The following range of investigations must be provided in the system.
i. ABO Blood grouping with partial D screening.
ii. Weak anti D test with ICT method.
iii. Antibody screening and identification.
iv. Single antigen test cards and antisera for Rh-C/c, E/e, Cw, Kell, Fya, Fyb, Jka, Jkb, Lewisa Lewisb, Lutherana, Lutheranb, MNS, etc.
v. Special gel cards for antihuman globulin test positive
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 685 -
IgG, IgM, IgA, C3d, C3c etc.
vi. Provision for acid elution method.
vii. Special blood grouping cards for donor and recipient for DVI variant.
viii. Syphilis antibody detection.
Detail procedure for all compatible methodologies mention as above must be provided. 3. Automated card reading and report generation with
bar code security.
4. Expression of results in grades of agglutination.
5. Capacity for 20 – 24 gel cards with ‘V’ bottom tubes in single run.
6. Peltier heating of incubator with programmable controls for 15 minutes and digital display of temperature.
7. Centrifugation force with 80 – 84G.
8. Clear transparent top for centrifuge and incubator with rust and corrosion resistant body.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 686 -
9. The system must be devoid of any wash phase.
10. Incorporated capabilities for validation storage and reproduction of results.
11. Parallel computer connection with bidirectional portability and appropriate software to be provided along with the equipment.
12. Compatible printer for printing of different data and customized report to be provided along with the equipment.
13. A quality control system must be incorporated in the equipment for all the lab.
14.
i. Provision for 2 and 3 red cell panel for antibody screening, 11 cell panel for antibody identification and pooled ‘O’ cell with known phenotype for donor screening as per NACO Guidelines.
ii. Provision for NaCl/Enzyme and cold agglutinins cards, modified bromelin solution, papain, cell stab, cell thaw and cell freeze reagent.
15. CE/ISI compliance of the system.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 687 -
SL. NO.
NAME OF EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
Consumables & Accessories
Unit Cost For each
item
Expected life of
the equipm
ent
CMC rates for
Post-Warranty next
5 consecu
tive years
DEPARTMENT. OF SURGERY ESI-PGIMSR, JOKA 1 OPERATING HAND
INSTRUMENTS OPERATING HAND INSTRUMENTS Set for LAPROSCOPIC SURGERY
1 Trocar /Cannula Size 11 mm
Trocar with pyramidal tip ,multi function automatic valve,
stopcock for insufflation
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 688 -
2 Trocar/Cannula Size 5.5mm
Trocar with pyramidal tip ,multi function automatic valve,
stopcock for insufflation
3 Maryland Dissecting forceps, 5mm, working length 33cm
Rotating, Dismantable with channel for cleaning & connector
pin for unipolar coagulation. Insulated Metal Handle without
ratchet & Milled Radel shaft insulation. Easy to change insert.
4 Curved Kelly Dissecting forceps, 5mm, working length 33cm
Rotating, Dismantable with channel for cleaning & connector
pin for unipolar coagulation. Insulated Metal Handle without
ratchet & Milled Radel shaft insulation. Easy to change insert.
5 Right Angle Dissecting forceps, 5mm, working length 33cm
Rotating, Dismantable with channel for cleaning & connector
pin for unipolar coagulation. Insulated Metal Handle without
ratchet & Milled Radel shaft insulation. Easy to change insert.
6 Babcock Grasping forceps 5mm, working length 33cm
5mm, Rotating, Dismantable with channel for cleaning
Non insulated handle with ratcheting mechanism, easy to change insert
7 Alligator Light Grasping forceps,5mm, working length 33cm
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 689 -
5mm, Rotating, Dismantable with channel for cleaning & connector
pin for unipolar coagulation. Insulated Metal Handle with ratchet
& Milled Radel shaft insulation. Easy to change insert.
8 Fundus Grasper , 5mm, working length 33cm
5mm, Rotating, Dismantable with channel for cleaning
Metal Handle with ratchet & Milled Radel shaft insulation.
Easy to change insert.
9 Tooth Grasper / Allis, 5mm, working length 33cm, with double row of teeth
Rotating, Dismantable with channel for cleaning
Metal Handle with ratchet & Milled Radel shaft insulation.
Easy to change insert.
10 Endo Grasper , 5mm, working length 33cm
5mm, Rotating, Dismantable with channel for cleaning
Metal Handle with ratchet and non-ratchet & Milled Radel shaft insulation.
Easy to change insert.
11 Double Action Claw , 5mm, working length 33cm
5mm, Rotating, Dismantable with channel for cleaning
Insulated Metal Handle with ratchet and non ratchet facility &
Milled Radel shaft insulation. Easy to change insert.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 690 -
12 Metzenbaum Scissor, 5mm, working length 33cm
5mm, Rotating, Dismantable with channel for cleaning & connector
pin for unipolar coagulation. Insulated Metal Handle without ratchet
& Milled Radel shaft insulation. Easy to change insert.
13 Straight Metzenbaum Scissor, 5mm, working length 33cm
5mm, Rotating, Dismantable with channel for cleaning & connector
pin for unipolar coagulation. Insulated Metal Handle without ratchet
& Milled Radel shaft insulation. Easy to change insert.
14 Hook Scissor, 5mm, working length 33cm
5mm, Rotating, Dismantable with channel for cleaning & connector
pin for unipolar coagulation. Insulated Metal Handle without ratchet
& Milled Radel shaft insulation. Easy to change insert.
15 Dissecting Electrode (L shaped) , 5mm, working length 33cm
5mm instrument with proper insulation upto working tip
16 Dissecting Electrode (Spatula) , 5mm, working length 33cm
5mm instrument with proper insulation upto working tip
17 Clip Applicator 10 mm dia for Ethicon LT-300
10mm, Rotating, with channel for cleaning
Metal Handle without ratchet .
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 691 -
18 Suction / Irrigation cannulas. Trumpet valve.
5mm all metal & single hand control trumpet with perforations at
distal tip for smooth function.
19 Reducer 10 / 5 mm for reducing 10 mm to 5mm dia.
20 Aspiration Needle, 5mm
21 Gall Bladder Extractor
10mm, Rotating, Dismantable with channel for cleaning
Metal Handle without ratchet .
22 Monopolar Cable
23 5mm Bipolar Fenestrated Forceps with Ring Handle and cable
24 Reusuable bipolar cable
25 5mm Straight tip needle holder with metal handle and ratcheting
mechanism, can be dismantled, with channel for cleaning.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 692 -
SL. NO.
NAME OF EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
Consumables & Accessories
Unit Cost For each item
Expected life of the equipmen
t
CMC rates for Post-Warranty
next 5 consecutive years
DEPT OF DERMATOLOGY ESI PGIMSR, JOKA KOLKATA 1 Radiofrequency
machine Radiofrequency machine Number of items: 2 Power required: 230v/50 hz Dimensions 260x300x150 Weight 7kg Electrodes insulated Frequency 0.20-2.93 Mhz Cut: 70%cut, 30% coagulation Coagulation : 60%coagulation, 40% cut Fulguration: available intensity control: Linear
2 Centrifuge machine
Centrifuge machine Number of items- 2 Capacity in ml: 24x5 Type of head: Angle No. of tubes: 24 Maximum speed: 3500 rpm Maximum RCF: 1250 W×D×M (MM) : 210×210×250 Supply: 221-240v, 50Hz, single phase
3 Binocular microscope
Binocular microscope Optical system: UIS2 (UNIVERSAL INFINITY CORRECTED) CE certified
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 693 -
Antifungal treated optical lens Illumination: built in transmitted Koeheler illuminator, 6v/30W halogen bulb 100-120V/220-240V ̴ 0.85/0.45A , 50/60 Hz Focussing: Stage height movement by roller guide (rock & pinion), stroke/rotation=36.8mm Full stroke range: 25mm Revolving nose piece: Fixed, quadruple nose piece with inward tilt Binocular observation: field no. 20, tube inclination:30 degree, interpupillary distance adjustment range: 48mm-75mm Stage: size-188mm x 134mm, movement range: 76mm (X direction) x 50mm (Ydirection) Specimen holder: double size holder Rubber grip: equipped as standard Condenser: type- Abbe condenser, NA: 1.25 with oil immersion, aperture in diaphragm: built in Dimensions & weight: 233mm (W) X 411mm (H) X 367.5 mm (D), 8KG
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 694 -
SL. NO. NAME OF
EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
Consumables & Accessories
Unit Cost For each item
Expected life of the equipmen
t
CMC rates for Post-Warranty
next 5 consecutive years
DEPT OF ENT ESI PGIMSR, JOKA KOLKATA 1 Surgical
Operating Microscope
Specification of Surgical Operating Microscope Surgical operating microscope for micro ear surgery and micro laryngeal surgery with the following associated features;
1. Integrated HD monitor to display surgical steps to
students.
2. Integrated HD video recording system with HD camera
system.
3. Integrated HD still photography enabling system with
camera attachment facility.
4. Data storage, transmission and documentation facility
with appropriate software.
5. Stereo co-observation tube for assistant surgeons and
students.
6. Lens for ear and laryngeal surgery (400, 200)
7. Lens covers and microscope covers for sterility
purposes
8. Microscope stand and wheels.
2 Rigid Oesophagoscope
Specification for Rigid Oesophagoscope set Adult: 1. 0 degree telescope diameter 5.5mm, length 53 cm, autoclavable with incorporated fibre optic light transmission 2. Telescope guide for use with 50cm esophagoscope
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 695 -
set Adult 3. fibre optic light carrier for use with 50cm esophagoscope 4.Rigid oval esophagoscope, outer diameter 12 X 16 mm, length 50 cm 5. Rigid oval esophagoscope, outer diameter 10X14 mm, length, 50 cm 6. Prismatic light deflector, autoclavable with fibre optic light cable connection 7. fibre optic light carrier for use with 30cm esophagoscope 8. Rigid oval esophagoscope, outer diameter 12.2X 16.2 mm, length 30 cm 9. Rigid oval esophagoscope, outer diameter 10.2 X14.2 mm, length 30 cm 10. Rigid oval esophagoscope, outer diameter 8.6X 12.1 mm, length 30 cm 11. Fibre optic light carrier for use with 20 cm hypopharyngoscope 12. Rigid Oval Hypopharyngoscope, outer diameter 10X14 mm. length 20 cm 13. handle for Esophagoscopes 14. Adjustable magnifier autoclavable(swivel action) 15. Cotton carrier(55cm) 16. Rigid suction tube with rubber tip, straight, working length 55cm 17.spring handle sponge holder, working length 55cm 18. Alligator forceps for hard foreign bodies, double action jaws, sheath diameter 2.5mm,working length 55cm 19. biopsy forceps and foreign bodies, working length 55cm 20. cupped forceps for biopsies, working length 55cm 21. Peanut removal forceps ,working length 55cm 22. Cotton applicator, working length 30cm 23. Straight suction tube with rubber tip, working length 35cm 24. Spring handle sponge holder, working length 35cm 25. Alligator forceps, sheath diameter 2mm,working length 35cm 26. Peanut forceps, working length 35cm 27. Cupped forceps for biopsy ,working length 35cm 28. Universal forceps for biopsy and foreign bodies ,working length 35cm
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 696 -
3 Rigid oesophagoscopy set , Paediatric
Specification for rigid oesophagoscopy set , Paediatric 1, Oesophagoscope tube, size 6,length 30 cm 2. Oesophagoscope tube, size 5, length 30 cm 3. Oesophagoscope tube, size 4, length 30 cm 4. Oesophagoscope tube, size 3.5, length 18.5 cm 5. Oesophagoscope tube, size 3, length 18.5 cm 6. Prismatic light deflector ,autoclavable with connection for fibreoptic light cable 7. Rubber telescope guide 8. Adjustable magnifier (swivel action) autoclavable 9. 0 degree telescope, diameter 2.9 mm, autoclavable, fibreoptic light transmission incorporated 10. Optical forceps,2x2 tip, with spring action handle for use with telescope (for coins and flat foreign body) to be used with 30 cm oesphagoscope 11. Optical forceps with spring action handle for use with telescope (for peanuts and soft foreign body) to be used with 30 cm oesphagoscope 12. Optical forceps with spring action handle for hard foreign bodies to be used with 30 cm oesphagoscope 13. Peanut removal forceps with double action jaws, sheath diameter 1.5mm,working length 35cm 14. Biopsy and foreign body forceps, double action jaws, sheath diameter 1,5mm, working length 35cm 15. Alligator forceps for hard foreign bodies, double action jaws, sheath diameter 1.5mm, working length 35cm 16. Cupped forceps for biopsy, double action jaws, sheath diameter 1.5mm, working length 35cm 17. Straight suction tube with rubber tip, working length 35cm 18. Straight cotton applicator working length 35cm - 3 such
4 Rigid bronchoscopy set, adult
Rigid bronchoscopy set, adult 1. 30 degree telescope, diameter 5.5mm, length 50cm, autoclavable, fibreoptic light transmission incorporated 2. 90 degree telescope diameter 5.5mm, length 50cm, autoclavable, fibreoptic light transmission incorporated 3. Rigid bronchoscope, size 8.5, length 43cm
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 697 -
4. Rigid bronchoscope, size 7.5, length 43cm 5. Rigid bronchoscope, size 6.5, length 43cm 6. Deflecting device for bronchoscopes and telescopes 7. FLUVOG Adapter with sliding glass window plug, sealing cap, notched lense and keyhole opening, movable 8. Adapters to respirator - 2 such 9. Rubber telescope guides - 2 such 10. Glass window plug - 2 such 11. Instrument guides for suction catheter - 2 such 12. Injection canula for positive pressure assisted ventilation, LUER lock, outer diameter 3.5 mm for use with bronchoscopes 13. Optical forceps, alligator, large jaws for hard foreign bodies 14. Optical biopsy forceps, circular cup, 4.3mm 15. Flexible forceps for biopsy 16. Alligator forceps for hard foreign bodies, double action jaws, diameter 2.5mm, working length 50cm 17. Peanut removal forceps, double action jaws, sheath diameter 2.5mm, working length 50 cm 18. Cupped forceps for biopsy, double action jaws ,sheath diameter 2.5mm, working length 50 cm 19. Cotton carrier, working length 50cm - 6 such 20. Sponge holder with spring handle, working length 50cm 21. Cytology brush with ring handle, working length 55cm 22. Coagulation suction tube, insulated, working length 50 cm accompanied by unipolar high frequency cord with 5mm plug, length 300cm 23. Straight suction tube with rubber tip, working length 50cm - 2 such 24. Curved suction tube with rubber tip, working length 50 cm 25. Suction tubes 4mm diameter, length 50 cm - 2 such 26. Aspirator, can be connected to suction tubes or suction catheter 27. Spare glass for aspirator 28. HUZLY Aspirator and bronchial irrigator 29. Laryngeal syringe, 5ccm, LUER lock, with canula 30. Bronchial atomizer, with graduated container and rubber bulb, length 50cm 31. Laryngeal atomizer with bulb, length 50 cm
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 698 -
32. Suction catheter, 7 Fr with connector 33. Suction catheter, 5 Fr with connector
5 Rigid bronchoscopy set, Paediatric
Rigid bronchoscopy set, Paediatric 1. Bronchoscope size 6, length 30cm 2. Bronchoscope size 4.5, length 30cm 3. Bronchoscope size 3.7, length 30cm 4. Bronchoscope size 3.5, length 26cm 5. Bronchoscope size 3, length 26cm 6. . FLUVOG Adapter with sliding glass window plug, sealing cap, notched lense and keyhole opening, movable 7. Adapters to respirator - 2 such 8. Rubber telescope guides - 2 such 9. Glass window plug - 2 such 10. Instrument guides for suction catheter, short, for children and infants - 2 such 11. Injection canula , only, LUER lock, outer diameter 3.5 mm for use with bronchoscopes - 2 such 12. Prismatic light deflector, autoclavable with connection for fibreoptic light cable 13. Cotton applicator, working length 35cm - 3 such 14. Sponge holder with spring handle, working length 35cm 15. Foreign body basket with ring handle, working length 35cm 16. Cytology brush with ring handle, working length 35cm 17. Straight suction tube with rubber tip, working length 35cm 18. Curved suction tube with rubber tip, working length 35cm 19. Suction tube, 3mm, working length 35cm, curved 20. Bronchial atomizer, graduated container and rubber bulb, working length 40 cm 21. Graduated containers - 2 such 22. Aspirator with spare glass and cut off hole, can be connected to suction tube or catheter
6 AUDIOMETER
AUDIOMETER REQUIREMENT The audiometer should have the following specifications: *It should be a Clinical PC-based audiometer. *The manufacturer should provide instructions and provision for calibrating the instrument.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 699 -
*The following tests should be able to be performed by the audiometer:
Pure tone audiometry, Speech audiometry ( Including
Speech reception threshold and speech discrimination
score), SISI, ABLB, AUTO THRESHOLD , TONE DECAY
*It should have the following provisions: SMPS
Switch Mode Power Supply capable of withstanding
extreme
voltage fluctuations (115 V to 270 V)
INPUT: Tone, Speech, Tape, Pulse Tone.
OUTPUT: Left, Right, Bone, L + R. F/F Left, F/F Right, F/F
L+R.
HEADPHONES: TDH-39/TDH-49.
BONE: B-71 BONE CONDUCTOR.
Air : 120 dB Max, 125 Hz to 12 kHz., -20 dB Min.
Bone : 80 dB Max, 250 Hz to 6 kHz., -20dB Min.
Noise : Wide Band, Narrow Band, Speech Band.
Built-in Mike, Ext. Mike, Mike Sensitivity Control.
Interrupt Lock.
Printer Facility-Sequential Merged Graphs.
Memory Review.
Computer Interface.
Storage of the patient data in the hard disc for future
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 700 -
reference.
Connectivity to an external USB Printer to print the
reports.
7 IMPEDENCE AUDIOMETER
IMPEDENCE AUDIOMETER
It should meet the international standards
Should be able to test the following
1. Tympanometry
2. Acoustic reflex test
Should have facility for producing printed report
Should have facility for data storage
8 TYMPANOMASTOID SET
SURGICAL INSTRUMENTS TYMPANOMASTOID SET
1. SHEA aural speculum – set of 4, black finish – 3 sets
2. Tumarkin tapered slotted aural speculum – set of 4 – 3
set
3. Adsonforcep – plain – S.Steel – 6 such
4. Adsonforcep – 1x2 teeth – S.Steel – 6such
5. Hartmann aural forcep – 3 such
6. Lempert endaural speculum – right – 3 such
7. Mollison self retaining mastoid retractor 3 such
8. Plester self retaining retractor 2x2 prong – 3 such
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 701 -
9. Plester self retaining retractor 3x3 prong – 3such
10. Plester self retaining retractor – right solid blade – 3
such
11. Plester self retaining retractor – left solid blade – 3such
12. Farabeuf periosteum elevator – straight – 3 such
13. Freer’selevator double ended – 3 such
14. Howarth elevator – 3such
15. Zollner suction tube with 4 microtips – 3 such
16. Verhoeven suction tubes – no. 12,14,16,18,20,22,24 – 3
sets
17. Verhoeven suction tube adaptor – 3 such
18. Micro aural crocodile serrated – fine straight – 3 such
19. Micro aural cup – straight – 3 such
20. Micro aural cup – upward – 3 such
21. Micro aural scissors – straight – 3 such
22. House dieter malleus nipper – up – 3such
23. House dieter malleus nipper – down – 3 such
24. Caw Thorne hook – micro pick 90 degree angled – 3
such
25. Caw Thorne hook – micro pick 45 degree angled – 3
such
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 702 -
26. Wullstein needle – very slight curved – 3 such
27. Wullstein needle – slight curved – 3 such
28. Wullstein needle – straight – 3such
29. Rosen curette curved straight shaft – 3uch
30. Sickle knife – 3 such
31. BealesRaspatory – 3 such
32. Circular cutting knife 60 degree – 3 such
33. Ball probe – 3such
34. Rosen elevator for lifting drum – 3such
35. Plester first incision knife – 3 such
36. Curved circular cutting knife – 3 such
37. House curette double ended – 3 such
38. House curette double ended slightly curved – 3 such
39. Myringotomy knife – 3such
40. Small curved scissor – 3 such
41. Mastoid micromotor drill (30000 rpm) 1
42. Straight hand piece for mastoid drill 1
43. Contra angle hand piece for mastoid drill 1
44. SS cutting burrs ( 8mm,6mm,4mm,2mm,1mm0.8mm) 1
each
45. Diamond polishing burrs (6mm, 4mm, 2mm 1mm) 1
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 703 -
each
9 STAPEDECTOMY SET
STAPEDECTOMY SET Each instrument one number required
Round Knife 45° diameter 1 mm, length 16 cm
Flag knife
Micro elevator
Sickle Knife, double-edged, standard model, slightly
curved, length 16 cm
Pick 90°, 16 cm, 0.6 mm
Pick 90°, 16 cm, 0.8 mm
Ear Forceps extra delicate, serrated, 0.4 x 3.5 mm,
working length 8 cm
Ear Forceps extra delicate, pointed, serrated, 1 x 4.5
mm, working length 8 cm
Scissors delicate standard model, blade length 8 mm,
working length 8 cm
Malleus Nipper, extra delicate, upbiting, width 0.8
mm, working length 8 cm
Ear Forceps extra delicate, oval cupped jaws, 0.6
mm, working length 8 cm
Ear Forceps extra delicate, oval cupped jaws, 0.9
mm, working length 8 cm
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 704 -
Perforator, 16 cm,diameter: 0.4 mm.
Perforator, 16 cm,diameter: 0.6 mm.
Perforator, length 16 cm, diameter 0.8 mm
Footplate burr
Measuring Rod, length 16 cm, Marker pins at 3 mm,
4 mm, 5 mm
Holding Forceps, for holding Stapes and Total
Prostheses, length 13.5 cm
Crimping Forceps for Total Prosthesis, length 10.5 cm
Scissors, for Total Prostheses, length 11 cm
Micro Hook, 2.5 mm, 45°, length 16 cm
Diamond Straight Shaft Burr, length 7 cm, Diameter
1.4 mm
Needle. 16.5 cm, light curve.
Seeker, ball end angled 45°, 15.5 cm, size 3.
Suction Cannula, angular, LUER- Lock, working length
6 cm, O.D. 0.7 mm- 2 in number
Suction Cannula, angular, LUER Lock, working length
6 cm, O.D.: 1.0 mm- 2 in number
Suction Cannula, angular, LUER- Lock, working length
6 cm, 1.3 mm- 2 in number
Suction Cannula, angular, LUER- Lock, working length
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 705 -
6 cm, O.D.: 1.5 mm- 2 in number
Suction Cannula, angular, LUER- Lock, working length
6 cm, O.D.: 2.0 mm- 2 in number
Adaptor, for suction cannulas- 2 in number
Curette, large, spoon sizes 2 x 3.2 mm and 1.6 x 2.6
mm, length 15 cm
Curette, small, spoon sizes 1 x 1.6 mm and 1.3 x 2 mm, length 15
10 ADENO-TONSILLECTOMY
ADENO-TONSILLECTOMY 1.BoyleDevis mouth gag- 1 (with full set of tongue blades) 2.Draffin Bipod- 2such 3.Magauran plate-1such 4. Tonsil holding forcep-1such 5. Tonsillar knife with dissector - 1such 6.Mollison’s blunt tonsillar dissector and anterior pillar retractor-1such 7.Serrated tonsillar dissector and anterior pillar retractor- 1such 8.Long straight tonsil hemostatic forceps- 1such 9. Naegus artery replacement forcep- 1such 10.Naegus ligature slipper and knot tier- 1such 11. Eve’s tonsillar snare- 1such 12. Long dissecting scissor- straight- 1such 13.Yankauer’s oral suction- 1such 14. St. clair thomson’s adenoid curette with cage- 3 sizes- 1each 15. Long tooth forcep- 1such 16. Quinsy forcep- 1such
11 SEPTO-RHINOPLASTY
SEPTO-RHINOPLASTY
1. Thudicum’s nasal speculum- 3 sizes- 1 each
2. St. Clair thomson’s long bladed nasal speculum- 3 sizes- 1 each
3. Killian’s self retaining nasal speculum- 2
01 set
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 706 -
4. Freer’smucoperichondrium elevator-2
5. Luc’s forceps- 2 sizes- 1 each
6. Killian’s nasal gouge- 1such
7. Tilley’s antral Harpoon-1such
8. Tilley’s antral trocar and cannula-1such
9. Tilley’s Forcep- 1 such
10. Turbinectomy scissors- 1 such
11. Walsham’sforcep- 1 such
12. Asch’s forcep- 1 such
13. 2mm osteotome-1 such
14. 2mm osteotome with guard-1 such
15. 10mm osteotome-1 such
16. 10mm osteotome with gurad-1 such
17. Mallet-1 such
18. Cartilage scissor-1 such
19. Aufritch retractor-1 such
20. Killian’s ala retractor-1 such
21. Push rasp-1 such
22. Pull rasp-1 such
23. Joseph saw-1 such
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 707 -
12 MICROLARYNGOSCOPY AND MICROLARYNGEAL SURGERY
MICROLARYNGOSCOPY AND MICROLARYNGEAL SURGERY 1. Kleinsasser’smicrolaryngoscope- 1such
2. Anterior commisure laryngoscope- 1 such
3. Light cable for laryngoscope-2
4. Riecker’s chest holder
5. Microlaryngeal cup forceps- straight, right turn, left
turn, up turn- 1each
6. Microlaryngeal alligator forceps- 2
7. Microlaryngeal scissors- straight, right turn, left turn- 1
each
8. Microlaryngeal blunt dissector with handle- 1 such
9. Microlaryngeal knife with handle- 1such
10. Vocal cord retractor with handle-1 such
11. Microlaryngeal suction- 1 such
12. Microlaryngeal suction with diathermy- 1such
13 GENERAL INSTRUMENTS
GENERAL INSTRUMENTS
1. AdsonTooth forceps- (5”)-4 such
2. AdsonNontooth forceps- (5”)-4 such
3. Needle holder- (6”/5”/4”)- 6 each
4. Curved needle holder-( 4”)- 4
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 708 -
5. Mosquito Artery forceps- curved(4”)- 24
6. Medium artery forceps-curved(5”/4”)- 6 each
7. Large artery forceps- curved(7”)- 6
8. Right angle artery forceps- large/medium(7”)- 4
9. Kocher’s artery forceps(6”)- 4
10. Sinus forceps-2
11. Kocher’s gland holding forceps(6”)- 2
12. Babcock’s gland holding forceps(6”)- 6
13. Alle’s tissue holding forceps(5”)- 12
14. Tissue cutting scissors- straight/curved(5”)- 2 each
15. Medium dissecting scissors- curved(6”)-4
16. Small dissecting scissors- curved(4”)- 4
17. Langenberg’s retractor- 4
18. Metal suction cannula- 3 sizes(
2.5mm/3mm/4mm)- 4 each
19. Humpy’s knife- 1
20. Malleable sinus probe-2
21. Towel clip- 24
22. Kidney dish( 6”/8”)- 4 each
23. Sponge Holding Forceps (8”)-6
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 709 -
24. Catspaw- 4 pair
25. Gallipot-6
26. Tilley’s Forceps- 4
27. Hartman’s forcep-4
28. Chettle forcep-6
14.
High Speed Microdebrider system for Nasal Endoscopic Surgeries, consisting of :-
Main Console
1. The system should be suitable for wide variety of procedures ranging from Rhinology, Other transnasal procedures, Otology/ Neuro otology / Nasopharyngeal / laryngeal / tracheal / bronchial/ and hand piece for Adenoid specific application.
2. Should have large Touch screen monitor. The various parameters should be able to adjust either from touch screen panel or from the multifunction foot switch.
3. Should be able to connect multiple hand pieces at a time like debrider hand pieces (Up to 5000 RPM in Oscillating mode & 12000 RPM in Forward mode), low speed Otology drills (Up to 16000 RPM) and High speed Otology drills (Up to 80000 RPM).
4. Should have inbuilt pumps each for Irrigation and Cooling.
5. Should have multifunction ergonomically designed foot control with
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 710 -
light emission for easy identification.
6. Should be able to control Speed / Mode, Forward / Reverse toggle, Active hand piece change from the Foot control itself.
7. Should have option for remote control Irrigation to operate from sterile
area.
8. Should have in built Lens cleaning system.
9. Should have 0 Degree, 30 Degree, 45 Degree & 70 Degree endoscope sheath compatibility for Automatic Lens cleaning system.
10. Should have provision to connect facial nerve monitor with the
Otology drill.
11. Main Console should have an option to operate manual foot paddle from console itself in case the foot paddle are not working.
12. Should have the provision to mount the console on various sizes of IV pole.
Hand piece:
1. Should be compatible with main console.
2. Should be able work up to the speed of 12000 RPM in forward rotation and 5000RPM in oscillation mode.
3. Should have finger tip control to rotate only the tip of the blade up to 360 deg.
4. Should have straight suction path to reduce clogging and allow efficient tissue removal.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 711 -
5. Should have integrated blade locking system to lock the blade tip rotation.
6. Should have integrated side grooves and cable clips to provide better tubing management.
7. Should have Titanium body to avoid rusting.
8. Should be able to operate 120 Degree curved blade for Maxillary Sinus Application.
9. Should be able to operate Diamond & Cutting burs for DCR Surgeries.
10. Should have provision to operate Inferior Turbinate blade for Turbinoplasty and Adenoid blade Adenoidectomy.
11. Should be compatible with Frontal Trephination System. Microdebrider blades and burrs
1. Straight Blade 0 Degree 4 mm- 01 pc. 2. 40 Degree Curved Blade 4 mm 01 pc. 3. 60 Degree Curved Blade 4 mm 01 pc. 4. 120 Degree Curved Blade 3.5 mm 01 pc. 5. Inferior Turbinate Blade 2.9 mm 01 pc. 6. 40 Degree Adenoid Blade 4 mm 01 pc. 7. Tonsillectomy Blade 4 mm 01 pc. 8. High Speed Diamond DCR Bur 2.5 mm 03 pcs. 9. Tapered Diamond Bur 4 mm 01 pc. 10. Laryngeal Blade 2.9 mm 22.5 cm Long 01 pc.
High Speed Otology Drill (Motor) 1. Coolant Tubing 02 pcs. 2. 7.5 cm Straight & Angled Attachment 01 pc. Each 3. 1 mm to 7 mm Cutting Bur 01 pc. Each 4. 1 mm to 7 mm Diamond Bur 01 pc. Each
Low Speed Otology Drill (Motor)
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 712 -
1. Crura Saw 0.75 mm 01 pc. 2. Perforator 0.5 mm 01 pc. 3. 0.6 mm to 0.8 mm Diamond Burr 01 pc. Each
Automatic Lens Cleaning System 1. 0 Degree Endoscopic Sheath 05 pcs. 2. 30 Degree Endoscopic Sheath 05 pcs. 3. 45 Degree Endoscopic Sheath 05 pcs. 4. 70 Degree Endoscopic Sheath 05 pcs. 5. Finger Switch 01 pc.
ALL THE ABOVE EQUIPMENTS SHOULD BE CE AND FDA & ISO APPROVED AND FROM SINGLE MANUFACTURER COMPANY NO LOCAL ACCESSORIES WOULD BE ACCEPTABLE. NO ECONOMY CLASS, E CLASS OR E LINE MODEL SHOULD BE ACCEPTED.
SL.
NO. NAME OF EQUIPMENT
& INSTRUMENT SPECFICATION Make/Mod
el No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
Consumables & Accessories
Unit Cost For each
item
Expected life of the equipmen
t
CMC rates for Post-Warranty
next 5 consecutive years
DEPARTMENT OF MICROBIOLOGY ESI-PGIMSR, JOKA 1 Real time
Polymerase Chain Reaction (PCR) System with Qualitative and Quantitative detection
SPECIFICATIONS Real time Polymerase Chain Reaction (PCR) System with Qualitative and Quantitative detection
a. The Real time PCR System must have International and/or National quality and safety certification, e.g. CE and/or UL/cUL and/or ISI certified and IVD certified.
b. The Real time PCR System should be an open platform system, and must have provisions for using third party kits and reagents for the molecular diagnosis of infectious diseases.
c. The Real time PCR System must at least have
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 713 -
the following In vitro Diagnostics approved kits available from the same manufacturer which are pre-validated on the quoted model :
i. Human Immunodeficiency virus
ii. Hepatitis B virus
iii. Hepatitis C virus
iv. Cytomegalo virus
v. Ebstein Barr virus
vi. Herpes Simplex virus
vii. Mycobacterium tuberculosis
d. There should be provision for using the system as simple Thermocycler for qualitative molecular detection of infectious diseases.
e. The Automated Real time PCR System should be accompanied with a desktop or laptop computer and printer system (required for the functioning and data storage and printing of reports) with original operating system and free software support for the lifetime of the machine.
f. The Automated Real time PCR System should have already been installed in at least two (02) reputed Academic and / or Medical institutions and / or reputed accredited diagnostic laboratories in the Eastern region of India.
g. Technical Parameters:
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 714 -
Features Specification Thermal Cycler Mechanism
Air based heating and cooling mechanism for maximum uniformity with even heating and cooling.
Sample Layout Should be flexible for the tube input volumes having capability of running 96 or more samples.
Additional Intra-assay Centrifugation
Any additionalstep of centrifugation of tubes while performing the assay should NOT be there.
Uniformity
Should have uniform temperature distribution. Should maintain iso-optical detection in all wells for maximum uniformity. Temperature uniformity should be in the range of ±0.02oC.
Chemistries Should come with standard chemistries for gene expression, quantification, mutation scanning, genotyping and methylation studies.
Temp Range Up to 99℃ Light Source
Different LED’s with 5 different wavelengths with minimum cross-talks (one LED with one wavelength). The assay should not be based on onesingle wavelength of light.Should be able to detect all wells equally with same optical path length.
Light Source Lifespan
Warranty on light source for minimum of 10 years.
Excitation Plexing
Should be minimum 5 plex. Should have capability of further increasing the multiplexing beyond 5-Plex in singe tube.
Dynamic Range Should be of 10 orders of magnitude Reaction Volume
10 µl-100 µl
Passive Reference Required?
Should NOT require any passive reference dye
Tube Format Should be able to mark the caps of the tubes. Should have flexible tube format. NOT CAPILLARIES.
Software Unlimited user Software license with maximum feature should come absolutely free of cost for the life of the machine.
In vitro Real Time In vitro Diagnostics approved validated kits on quoted
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 715 -
diagnostics Approval
model as mentioned above should be available with instrument manufacturer. Instrument should also be In vitro diagnostics certified for use in diagnostic laboratory.
2 Automated (Multicapillary
) Capillary Electrophoresis
System
Automated (Multicapillary) Capillary Electrophoresis System:
a. The automated multicapillary electrophoresis System must have International and/or National quality and safety certification, e.g. CE and/or UL/cUL and/or IVD certified and/or ISI certified.
b. It should be a fully automated capillary electrophoresis system for fragments of DNA and RNA, which is based on high throughput nucleic acid analysis of at least 60 samples in one run within 30 minutes.
c. System should comewithReady-to-rungelcartridgesallowing samplesto be analyzed replacing laborintensiveagarosegel electrophoresiseliminating the need for handling carcinogenic compounds likeethidium bromide.
d. Post PCR samples should be directly analyzed for fragment analysis using the system without prior purification of samples.
e. The instrument should be usable for genotyping, restriction digestion, qualitative monoplex or multiplex PCR, PCR-based cDNA library screening and other routine molecular
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 716 -
biology applications.
f. System should work with an input volume of equal or less than 1 μl offering a high sensitivity ofupto 1000pg.
g. Instrument should come with user-friendly analysis software including an accompanying Laptop with original operating system and free software support and upgradation for the lifetime of the instrument.
h. The Real time monitoring of the sample analysis should be visible on the computer screen.
i. Operating temperature : 20-28°C
j. Excitation Source : light-emitting diode (LED)
k. Detection Source : Photomultiplier Tube
l. The instrument must eliminate the need for a separate Gel Doc system after Electrophoresis.
m. The instrument should be able to provide Standardized and accurate analysis with a resolution down to 5 base pairs.
3 Biosafety
Cabinet: Class II Type A2
with accessories
Biosafety Cabinet: Class II Type A2 with accessories:
a. The Biosafety cabinets must have International and/or National quality and safety certification, e.g. CE and/orUL/cUL-listed and/or ISI
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 717 -
certified.
b. Class II Type A2 biological safety cabinet with factory installed programmable UV light for surface disinfection.
c. Standard 4 ft model: Exterior dimension preferably not to exceed, 52 X 64 X 33 inch (W X H X D) ± 10%
d. Double Blower system; Brushless DC motor technology for saving energy consumption.
e. SmartFlow Indicator, with Digital airflow verification technology (The balance of downflow and inflow should control the cleanliness and containment – preventing room contamination from reaching the BSC work surface and keeping any biological hazards in the BSC work area from escaping out the front opening.)
f. Ergonomic design with 10° Slopped front, preferably with Armrest.
g. Supply / exhaust air filter specification: H14 HEPA or better. The HEPA or ULPA filters shall capture contamination in the room air and in air drawn from the BSC work area to create clean downflow and the exhaust air.
h. Service Valves (through side walled access ports)
i. Receptacles in the Rear Wall: load capacity of
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 718 -
up to 5A
j. Smart Clean front window Design easily lowered for cleaning of inner surface & protects operator.
k. The provider must provide at least two (2) ergonomically designed compatible, height adjustable hydraulic or screw turn low back support revolving stools with each Biosafety cabinets for user operations.
4 Micropipettes
(0.5-10μL set, 10-100μL set, 100-1000μL set) with disposable Tips and autoclavable boxes.
Micropipettes (0.5-10μL set, 10-100μL set, 100-1000μL set) with disposable Tips and autoclavable boxes.
a. Each set shall contain 3 adjustable volume Fully autoclavablemicro pipettes of the following ranges:
i. 0.5 - 10μl
ii. 10 - 100μl
iii. 100 - 1000μl
b. Six (06) reusable T.I.P.S boxes with 96 Pipette tips in each boxes; Three pairs of boxes are to be compatible to the above three different sets of Micro pipettes.
c. The boxes and the tips should also be fully autoclavable.
d. The micropipettes should have Spring Loaded Tip Cone for improved ergonomics which
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 719 -
should be tight fit to the tip.
e. Adjustment opening to adjust the pipettes to a specific liquid and volume.
f. Control Button with very low operating force, positioned for perfect ergonomics.
g. Ejector withvery low operating force, positioned for perfect ergonomics.
h. Volume Display: 4 Digits with magnification.
i. There should be quick connection clip toremove lower part easily.
5 Vortex Mixer Vortex Mixer (with accessories):
a. Digital vortex Mixer for Molecular Biology Applications with International and/or National quality and safety certification, e.g. CE and/orUL/cUL-listed and/or ISI certified.
b. Should be ideal for applications demanding repeatable results.
c. Variable speed control at least from 500 to 3000 rpm. A higher range is allowable.
d. Touch keypad controls and LED display for speed and time. Not merely Analog controls, for ensuring reproducibility in molecular diagnostics.
e. Microprocessor control to maintain set speed for consistent mixing.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 720 -
f. Timer displays elapsed time; auto shutoff at end of cycle.
g. Should be allowable to be used in 220 to 240 V and 50/60 Hz electrical supply.
h. Should have robust durable electrical connectivity conforming to standard Indian sockets.
i. The following accessories have to be quoted along with the vortex mixer, which can be steadily fitted and connected with the mixer:
IV. 24 to48 numbers vertical Microtube Holder for mixing 0.25 to 2.0mL microcentrifuge tubes / PCR tubes or high-density foam inserts to accommodate 24 to 60 microtubes.
V. Vertical tube holder for mixing at least four (04) 50 ml tubes together.
VI. Vertical tube holder for mixing at least four (04) 5 ml (09 to 13 mm diameter) tubes together.
6 Molecular
grade DNAse RNAse free Water Purification System
Molecular grade DNAse RNAse free Water Purification System
a. The entire water purification system should be equipped with three part equipments, quoted together by the same bidder, including:
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 721 -
a. A Pretreatment Water filtration reverse osmosis system
b. A Pretreatment Iron, hardness and particleremoval system
c. A Molecular grade Water purification system proper.
b. The Pretreatment Water filtration reverse osmosis system (i) and the Pretreatment Iron, hardness and particle removal system (ii) must have National and/or International quality and safety certification, e.g. ISI and/or CE and/or UL/cUL certified.
c. The Molecular grade Water purification Systemproper (iii) must have International and/or National quality and safety certification, e.g. CE and/or UL/cUL and/or ISI certified.
d. The Pretreatment Water filtration reverse osmosis system (i) and the Pretreatment Iron, hardness and particle removal system(ii) should be able to be connected in series connection, directly from the pipeline ground-water feed and should be able to deliver output water quality compliant to the acceptable limit of the feed water of the Molecular grade Water purification system proper(iii) as mentioned below in tight fitted series connection.
e. The Pretreatment Water filtration reverse osmosis system (i) and the Pretreatment Iron, hardness and particle removal system(ii) should
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 722 -
be able to deliver at least 15litres of water per hour to the Molecular grade Water purification system proper(iii).
f. The Pretreatment Water filtration reverse osmosis system (i) and the Pretreatment Iron, hardness and particle removal system (ii) should at least be equipped with the following technology:
a. * 2 Stage pretreatment system
b. * 5 micron and 1 micron wrapped type depth filter
c. * 3 Pressure gauges
d. * Less than 50 Db noise levels
e. * Automatic low/high pressure cut off
f. * DC pump with 0-2 pressure at 120L /hr
g. * Inlet screen filter to DC pump
h. * Optional filters : 0.5 micron
i. * Optional filters : Activated carbon
g. The Molecular grade Water purification system proper (iii) should be able to deliver the required quality of pure and ultrapure water from its feed water acceptance level of:
9) 2000micro Siemens conductivity
10) Fouling Index (SDI) < 12
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 723 -
11) Total Chlorine < 3 ppm and
12) TOC <2000 ppb
h. The Molecular grade Water purification system proper (iii) should beable to deliver reagent Grade Type 2 water (pure quality) and Reagent grade Type 1 standard water (ultrapure quality) as defined by standard international quality control organizations like ISO:3696 standards and / or Clinical and Laboratory Standards Institute-Clinical Laboratory Reagent Water standards and / or ASTM standards.
i. The Molecular grade Water purification system proper (iii) should have two different points of delivery. It should be able to deliver through one point of delivery, reagent Grade Type 2 water (pure quality) bacteria and pyrogen free water, which may be used for basic laboratory needs, such as buffer and reagent preparation, microbiology media preparation, histology and rinsing of glassware of the following grade:
Type 2 Pure grade Water outlet
Parameter Value
Resistivity, Mega Ω @ 25 °C 10 – 15
Programmable water flow rate / minutes ̴01
TOC, ppb (μg/l) < 30
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 724 -
Bacteria, cfu/ml < 10, reducible to < 0.1 *
Particulates > 0.22 μm, Particulates/ml < 1 *
Silica rejection 99.9%
Pyrogens (endotoxins), EU/ml < 0.001 **
RNases, ng/ml < 0.01 **
DNases, pg/μl < 4 **
(*) With special filter for microbiological grade water
(**) With special filter for molecular grade water
j. The Type 2 water (pure quality) production system / chamber of the Molecular grade Water purification system proper (iii) should be enabled at least with the following technologies:
1. Pretreatment cartridge
2. Reverse Osmosis with a high flux polyamide membranewith 94- 99% ion rejection backed by Pump with temperature feedback mechanism so that the flow rate should be 3 ltr/hr at room temperature .
3. Electro Deionization with auto regeneration by electric current, eliminating the need for chemical regeneration or replacement of DI
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 725 -
resin cartridges with carbon beads at cathode of the EDI module to prevent scaling inside of the module
4. Activated Carbon cartridge
5. UV lamp with 254 nm Wave lengthbefore entering the tank
6. Recovery loop with capillary tube and diaphragm valve to minimize water wastage
7. Carbon beads at cathode of the EDI module to prevent scaling of the module
8. Permeate divert valve which will divert low quality water to the drain
9. Coaxial resistivity cell with a flow through design and a cell constant of 0.01cm-1
10. Display both compensated and non-compensated temperature accurate within ±0.1°C.
11. The reservoir tankshould be blow moulded, cylindrical PE reservoir with a conical bottom and opaque walls with a minimum of 30 litres capacity.
12. Sensor rod float switch, programmed to have high and low level cut-off
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 726 -
based on water level in the tank.
13. The reservoir tank should possess a tank vent filter made of soda lime, activated carbon and 0.22 micron hydrophobic membrane to trap contaminants present in atmospheric air.
14. The Point of Delivery units should be of adjustable height and rotating arm-adjustable to any glassware.
15. There should be multicolour monitor displaying resistivity, TOC, level of water in reservoir, volume dispensed etc.
k. The Molecular grade Water purification system proper (iii) should also be able to deliver through a different point of delivery, Type 1 water (ultrapure) DNA, RNA, DNAse, RNAse free water for molecular biological applications, suitable for genomics applications (quality at least equivalent to DEPC-treated water) and cell culture of the following grade:
Type 1 Ultrapure Molecular grade Water outlet
Parameter Value
Resistivity, Mega Ω @ 25 °C Around 18.2 (> 18)
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 727 -
Programmable water flow rate / minutes ̴ 0.05 to 2
TOC, ppb (μg/l) < 5
Bacteria, cfu/ml < 0.1 *
Particulates > 0.22 μm, Particulates/ml < 1 *
Pyrogens (endotoxins), EU/ml < 0.001 **
RNases, ng/ml < 0.01 **
DNases, pg/μl < 4 **
(*) With special filter for microbiological grade water
(**) With special filter for molecular grade water
l. The Type 1 water (pure quality) production system / chamber of the Molecular grade Water purification system proper (iii) should be enabled at least with the following technologies:
9) Water source feed should be a closed connection from the Type 2 water reservoir tank eliminating any possibilities of contamination.
10) Re-filtration through two stage mixed bed ion exchange and activated carbon cartridge to remove ionic and organic contaminants to trace levels.
11) Low pressure mercury vapour lamp made of quartz with 185/254 nm dual wavelength
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 728 -
UV lamp.
12) Should contain high-precision resistivity meters with following features-
a. Coaxial electrodes to warrant cell constant stability.
b. Low cell constant (0.01 cm-1) for optimum measurement accuracy of low ionic contamination
c. Temperature measurement with a 0.1 °C resolution for proper report of temperature compensated resistivity
13) Should contain a built in TOC monitorwith a Quartz celland UV lamp which should accurately measure online TOC from 1- 999 ppb.
14) To prevent deterioration of water quality during periods of non-use, the ultrapure water system will be able to recirculate water to maintain high water quality.
15) Special filter packs for ultrafiltration and DNAse RNAse removal at the point of delivery or dispensing unit.
16) Controllable & user login password protected dispensing unit for Type 1 ultrapure water with ultrafiltration cartridge at the collection end with Log Reduction Value between 5.6 and 7.65 over challenge range of 220 and 22000 Eu / mL.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 729 -
m. To avoid maintenance errors and to improve traceability, the internal primary consumable water purification cartridges should have a built-in RFID tag.
n. To comply with Standard requirements, the resistivity meter shall be able to display the non-temperature-compensated resistivity.
7 Automatic
Electronic Laboratory Balance
Automatic Electronic Laboratory Balance
a. The Electronic Laboratory balance should have International and/or National quality and safety certification, e.g. CE and/or UL/cUL-listed and/or ISI certified.
b. The maximum weighing capacity should be 500 grams with a tare range of 0 to 500 gm. A higher range is allowable.
c. The minimum readability should be 0.1 mg differences.
d. The balance should be fitted with durable electrical connectivity compatible to Indian electrical standard sockets and operable in 220 to 240 V and 50/60 Hz electrical supply.
e. The balance plate should be covered with High draft shield fibre / glass covers with mounted front and rear fibre / glass panels, including sliding doors.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 730 -
f. The balance should have digital electronic display and preferably soft touch controls for Power, Tare and calibration options.
8 Carbon dioxide
(CO2) Incubator
Carbon dioxide (CO2) Incubator: Technical specifications
1. CO2 Incubator with work chamber volume approx. 150 to 190 liters / 5.3 to 6.5 cu. ft (± 10%).
2. Air jacketed heating system with temperature control by microprocessor.
3. Temperature range from ambient +3 o C to + 55 o C.
4. Temp. Deviation with respect to time is + 0.1K. 5. Continuous air Contamination prevention by in
chamber Class 100 HEPA Air Filtration. 6. Event based Decontamination with in-built moist
heat High temperature cycle, with ease operability, preferably single switch operation of sterilization cycle. The built-in automatic decontamination facility to remove bacteria, fungi, spores, mycoplasma etc without removing sensor, fan or any other fitting. The system should employ automatic decontamination routine at moist heat of 90o C or equivalent.
7. CO2 control by Microprocessor based & by heat resistant Thermal Conductivity detector to
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 731 -
withstand heat of decontamination.
8. CO2 range 0 to 20% or better and CO2 accuracy + 0.1% by volume.
9. System should have Interactive Control with Touch screen for rapid access of important information for each critical parameter in the Incubator.
10. Humidity range should be 95% rH or higher. Recovery time for humidity loss during door opening for 30 seconds upto 96% rH of initial value should not be more than 20 minutes.
11. At least 3 nos. stainless steel perforated shelves should be supplied.
12. It should be supplied with access port to allow any cable, plug or tubing to be easily inserted into or out of the chamber.
13. Interior chamber should be made of stainless steel with electropolish finishing of inner surface with rounded corners on all sides for easy cleaning. The shelves and fan impeller also should be made of stainless steel and should not have nuts or bolts for shelf supports to reduce the scope of growth of contamination. No plastic parts should be inside to avoid VOC.
14. Built-in audible and visual water level alarm should be available when the water reservoir (water tray less system to avoid contamination) needs to be refilled to ensure a constant high
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 732 -
level of humidity and to prevent cultures from drying out.
15. Independent electronic over temperature protection with separate sensor should be available for sample protection.
16. The system should have large digital display for both temp. & CO2 simultaneously.
17. System should have at least two doors, one main door and one glass doors.
18. Suitable for 230V, single phase 50Hz operation. 19. Suitable servo voltage stabilizer with high
voltage low voltage cut off circuit, auto reset with delay timer and spike eliminator etc.
20. Double stage CO2 pressure regulator with stainless steel diaphragm.
21. 18Kg CO2 Cylinder filled with CO2 gas 99.5% or better purity required for operation of CO2 Incubator, along with cost of refill should also be quoted.
9 Hot air oven
Hot air oven Technical specifications
1. Should be CE certified internationally quality control approved instrument.
2. Corrosion-resistant galvanized steel chambers. 3. Digital display and timer facility 4. Upper temperature cut off ( automatic) 5. Microprocessor temperature control.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 733 -
6. At least 2 tilt proof wire-mesh shelves 7. Chambers and heating elements should made of
corrosion resistant steel. 8. Chambers should be easy to clean. 9. Volume minimum 75 litres 10. Operating temperatures from 50° to 250°C. 11. Easy to use, microprocessor-controlled touch
button operation.
10 Automatic
Evacuation-
replacement
system for the
culture of
anaerobes,
capnophiles,
and
microaerophile
Automatic Evacuation-replacement system for the culture of anaerobes, capnophiles, and microaerophile:
1. Automatic evacuation-replacement system with at least One to Three (1-3) gas inlet connections: CO2, H2, and O2 and One to Four (1-4) jar outlet connections.
2. The System should be internationally quality control certified, e.g. CE / ISO / ISI certified.
3. The System should have pre-programmed functions with easy to use, preferably single touch key operations for preparing Anaerobic, Microaerophilic and Capnophilic culture conditions.
4. Following associated transparent Polymethylmethacrylaat (PMMA) jars with Gas tight fit by means of a snap-shut adaptor on the lid of the jar and stainless steel petri dish holders of the following dimensions are required to be supplied along with:
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 734 -
a. Two (02) equivalent jars: Diameter and height: Ø =123mm, h=240mm (±10%) Volume: 2.75 L (±10%) Contents: 1 stack of 12 Petri dishes with Ø 9-10cm (±10%)
b. Two (02) numbers of Petridish holders: Petri dish holder for 12 Petri dishes with Ø 9/10cm made of stainless steel
c. Two (02) equivalent jars: Diameter and height: Ø =175mm, h=240mm (±10%) Volume: 5.65 L (±10%) Contents: 1 stack of 12 Petri dishes with Ø 14.5cm (±10%)
d. Two (02) numbers of Petridish holders: Petri dish holder for 10 Petri dishes with Ø 14.5cm made of stainless steel
e. One (01) number micro well plate holder: Holder for micro-well plates of 9 x 13 cm, made of stainless steel
f. One (01) equivalent jars: Diameter and height: Ø =230mm, h=240mm (±10%) Volume: 9.66 L (±10%)
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 735 -
Contents: 3 stack of 12 Petri dishes with Ø 10cm (±10%)
g. One (01) number of Petridish holder: Petri dish holder for 3 x 12 Petri dishes with Ø 9/10cm, made of stainless steel, to be fitted in the height of 240 mm jar.
5.Palladium coated catalyst pouches ideal for the big jars:
h. SIX (06) Sets of catalysts, ideal for the big size jars are to be provided along with, which can be easily re-used by reactivation in Hot air oven.
6.Reducing valve: To reduce the pressure in the gas cylinder to the system working pressure, a reducing valve has to be provided with the gas cylinder(s). This must be a 2-step reducing valve, preferably calibrated and supplied by the same manufacturer, which has manufactured the Automated evacuation-replacement system. The working pressure should be adjustable to 1.8 Bar or 26 psi.
7. Option of user programming function (free user programming of oxygen level, gas mixture and evacuation level) should be there. 8. Option for Preprogrammed recipe for oxygen level, gas mixture and evacuation level should be there. 9. The bidder should also quote for 18Kg CO2, H2, and O2 Cylinders filled with CO2, H2, and O2 gases 99.5%
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 736 -
or better purity required for operation, along with cost of refill should also be quoted.
11 Hot air sterilizer, 160ºC
Power supply: 440 V,AC, 3 Phase Material of Construction: SS 304 Motor : Supply: 0.5 HP: 1440 RPM: 1-0, 230 V AC: 50 Hz Exhaust: 2 HP 2800 RPM Blower (Impeller) : Supply: 210 x 117 Wmm Exhaust : ---- Dimensions: (W x D X H): 1060 x 1040 x 2150(Approximate) Bioclean work space: 877 x 660 x 610 Filters (W x D X H): Pre filter: size : 305 x 380 x 45 Fresh Air Filter: Type: EU-6 Intermediate: Size: 915 x 610 x 45 Type: EU-13 Final Filter: Size: 915 x 610 x 75 (ANTIMICROBIAL) Type: EU-13 Intermediate: Size: 915 x 610 x 100 (ANTIMICROBIAL) Type: EU-13 Exhaust filter: Size: 915 x 457 x 100 Type: EU-13 Differential pressure gauge : Magnehelic pressure gauge Across HEPA filter wrt. ambient: 0-25 mm Across work space wrt. ambient: 0-10 mm Illumination: UV light: 1.5' L & 30W FLU light: 1.5' L & 20W Special features: Virus burnout system
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 737 -
12 Venereal Diseases
Research
Laboratory (VDRL)
shaker
Bench top, 12” x 12” platform size Built in timer 0-15 minutes Maximum speed of 180 rpm Built in speed regulator
13 Macintosh fields
anaerobic jar
Anaerobic system
Supplied with transparent unbreakable poly carbonate jar of approximately 3.5 lt capacity
Sturdy aluminum lid clamp and sealing ring with built in safety features
Pressure valve with safety valve and two way pressure guage
Anaerobic indicator tablet
Anaerobic gas pack 3.5 lt
Petri plate carrier
14 Dissecting
microscope
Eye piece 10 x Adjustable mirror
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 738 -
SL. NO.
NAME OF EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
Consumables & Accessories
Unit Cost For each
item
Expected life of the equipmen
t
CMC rates for Post-Warranty
next 5 consecutive years
DEPARTMENT OF DENTAL
1. Chair Unit Specifications of dental Equipments /Instruments of newly Developed upcoming Dental Surgery
1. Chair Unit : Electrically operated
programmable chair, both hand and foot
control operation, over hanging delivery
unit, spittoon with auto flush, High and
low intensity operating light, motorized
suction (with auto drain) X-ray viewer,
three way syringe, zero backache
doctor’s stool.
a. Light cure unit : Light emitting diode (LED)
b. Air rotar with Controlled box : along with
(i) Air compressor: Minimum 1.5 HP, Oil free
(ii) Air rotor Hand piece: 2 to 3 Lakhs RPM
2 Dental Electro Surgery
Unit with multiple
Dental Electro Surgery Unit with multiple tips
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 739 -
tips
3 Automatic dental X-
ray film developer –
IOPA (Intra oral Peri
apical radiograph)
automatic processor
Automatic dental X-ray film developer –IOPA (Intra oral
Peri apical radiograph) automatic processor
4 Lead apron for use
along with dental X-
ray unit
Lead apron for use along with dental X-ray unit
5 Electric High Speed
Micro motor
Electric High Speed Micro motor of about 35000 RPM with reverse forward switch, foot control, with Both straight and contra angle Hand Piece.
6 Ultrasonic Scalar Ultrasonic Scalar : with four tips
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 740 -
SL.
NO. NAME OF EQUIPMENT
& INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
Consumables & Accessories
Unit Cost For each
item
Expected life of the equipmen
t
CMC rates for Post-Warranty
next 5 consecutive years
DEPARTMENT. OF RADIOLOGY ESI-PGIMSR, JOKA 1 500 MA X-RAY
MACHINE Technical specification of 500 MA X-RAY MACHINE
A 500 mA. Multipulse High frequency X-Ray machine for Radiography. RATINGS: 50KW High frequency X-Ray generator for radiography . Radiography Parameters: 35 to 125KVor150 KV Multi steps as many as possible Small Focus – 100 mA & 200 mA Large focus – 300mA, 400mA and 500mA mAs – 1.25 to 200 mAs in multiple steps as many as possible. Control: Floor or Wall mountable control panel, ON and OFF switches Automatic safety system to block unwanted exposure factors beyond tube ratings. Digital display of active KVP, mA and mAs. Hand switch with flexible long retractable cord. Compact durable soft touch keypad. Table or Vertical Bucky selection and table top radiography switch. Ready and X-Ray on switch with indications. Tube Unit: Rotating anode tube unit with dual focus x-ray tube insert. Anode Speed:- Minimum 2800 rpm. Focal spot:- Dual focus, Small focus:- 0.6mm to 1 mm Large focus:- 1.2mm to 2.00 mm Protection:- Totally thermal Protection. HV/HT cable compatible with X-ray tube. Motorized tube movement with all round tube angulation preferable
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 741 -
Collimater: Manual light beam diaphragm. Tube Stand: Floor to ceiling stand and with counter balanced tube head 360 degree rotation (rotatable+/- 180 degree), tube rotation with column axis all round movement ( Longitudinal, Transversal, UP & Down), mounted on floor ceiling rails for convenient movement. Safety lock in case of wire shortage. Ceiling suspension tube preferable. Table: Motorized table with 6 way movement (table height adjustment) . Motorized bucky with grid ratio 8:1 (80 to 100 lines per inch). Stainless steel cassette tray with electromagnetic brakes. Stain free laminated table top. Operating Voltage: 400-440 volt AC 50 HZ. Three Phase. Chest Stand: Motorized or manual Vertical Bucky Stand with counter balanced. Head to Toe Vertical travel (455mm to 1900mm). Electromagnetic locking method (lock released when switch is pressed). Also separate Cassette holder attachment with the Vertical Bucky Stand for direct exposures. Accessories:- Compression Band, Hand Grip & foot step. Unit should have the AERB approval.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 742 -
SL. NO. NAME OF
EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
Consumables & Accessories
Unit Cost For each
item
Expected life of the equipmen
t
CMC rates for Post-Warranty
next 5 consecutive years
DEPARTMENT OF PAEDIATRIC
1 NEONATAL
RESUSCITATION
UNIT WITH
WARMER
NEONATAL RESUSCITATION UNIT WITH WARMER:- NEONATAL RESUSCITATION UNIT (MICRO-COMPUTER CONTROLLED) WITH WARMER SPECFICATION:-
a. Controlled Resuscitation system. Oxygen
Administration facility, Low Pressure suction and
warming with infrared Radiant Heat Source.
b. Inline Manometer,
c. Oxygen Administration Facility: i) Oxygen Flow
control facility with flow meter (o to 15
lit/min).ii) Oxygen Pressure Adjustment valve, iii)
Humidifier Bottle, iv) Facility to keep Oxygen
cylinder, v) Connecting hose for wall Outlet. vi)
Silicon Autocluvable Resuscitation Bag with 00
and 01 size of Masks.
d. Slow Suction: This is a specially designed
electrically operated slow suction. Apart from
others, it is non-motorized slow suction. The
suction pressure can be adjusted as per
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 743 -
requirement.(0-110 mm Hg.)
e. Servo Control System to maintain an optimum
skin temperature.
f. Precise cradle Temperature control.
g. Manual Warming Facility.
h. Stop Watch- additional Facility provided to note
down timings during monitoring various vital
signs of baby, e.g. temp. Heat rate, Respiration
Rate.
i. Reminder Timer.
j. Apgar Timer with Birth Time Recorder.
k) a) Power Source: 230 +/- 10% volts. 50 Hz.
B) Control Method: Micro-Computer Controlled
intelligent proportionate Power Control.
c) Heater Capacity: 600 Watts.
d) Light Source: 60 watts bulb to examine
babies.
e) Power Consumption: 850 watts.
l) Temperature Controller Specifications:- i. Skin Mode Control: From Body Temperature to 38
C. ii. Air Mode Control: From Room Temperature to 39
C. iii. Resolution: 0.1 C.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 744 -
iv. Accuracy: +/- 0.2 C. n) Alarms: (Audio visual with auto Reset facility) Alarm Condition Message on Display
Skin + I.C. HI
Skin - I.C. LO
Air +1.5 C HI
Air - 3 C LO
Skin >38C OVER
Air<39C OVER Skin/Air Sensor Failure Fail Heating system Failure HEAT OFF o) Safety Cutoff; When Skin Temperature exceeds 38C. When Cradle Temperature exceeds 39C. p) Power Failure Alarm: Audio –visual. q) Distance between Heater source and Baby: 88 (34.5) r)Dimensions: Height X Width x Depth-cm (inch) 203 (80) X 63.5(25) X 100 (39.5) s) Baby Tray: Length 72 (28.3) x width 45 (17.7) t) Should have 1 drawer system attached with the equipment for storage facility. w) It should be in compliance with ISO 9001:2000. Should have Q.A. International Certification Limited.
2 DOUBLE SURFACE LED PHOTOTHERAPY
DOUBLE SURFACE LED PHOTOTHERAPY Specification:- Wide Effective Area.
Unit should have blue cool led light source with wave length
of 450-460 nm.
Long Life->20,000 Hrs.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 745 -
No UV / IR Radiation.
No Heat Generation.
Low Power consumption.
Negligible Maintenance Cost.
Light Weight & Compact.
Height and Angle Adjustment facility.
Mounted on Castor Wheels for Easy Mobility.
Can be used in Conjunction with any make radiant Warmer.
Digital time Totalizer.
Irradiance> 60 u/W/cm2/nm.at 45 cm from the light source.
Wavelength 450-460 nm (peak 455 nm free of UV and IR
radiation.
Height adjustable from 1198+/-20 mm to 1680+/-20 mm
UNDER SURFACE SOURCE UNIT:
Unit should have blue cool led light source with wave length
of 450-460 nm.
Free of UV/IR radiation.
Light intensity is variable from 7-60 um/nm/cm2.at a distance
of 45 cm.
Infant care Trolley in Stainless Steel Specification:-
Mechanical Specification:-
Convenient working level with 6 mm thick imported acrylic
collapsible side support, accessible from all sides.
Acrylic Tray with Foam mattress. IV Pole & Facility to take
X-ray.
Head up /down facility.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 746 -
Stand with separate Infant care trolley.
Mounted on 4” castor wheels for easy mobility.
Infant care Trolley with transparent acrylic bed and bubbles
mattress for baby. Fabrication in mild steel, baby bed area in
Stainless steel.
3 CPAP MACHINE SPECIFCATION OF CPAP MACHINE SYSTEM: Valve based continuous flow CPAP and IPPR. Bubbler based bubble CPAP. DISPLAYS: Digital and Analog Display of CPAP pressure in CPAP Mode. Continuous Digital display of Delivered pressure in IPPR Mode. ALARMS; CPAP High and low Alarms (Audio Visual)
PRESSURE GAUGE: -20 to 100 cm H2O
GAS MIXNG: Air-Oxygen Mixer using calibrated
Rotameters.
AIR SOURCE: Inbuilt Air Compressor (Optional) (20 to 90
PSI).
O2 SOURCE: Inlet for Oxygen Gas (20 to 90 PSI).
POWER: 230V A.C. 50 Hz.
Asccessories: Warmidifier, Breathing Circuits(Disposable).
CPAP Interface, Nasal Prongs, Dummy Test Lung.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 747 -
SL. NO. NAME OF
EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
Consumables & Accessories
Unit Cost For each
item
Expected life of the equipmen
t
CMC rates for Post-Warranty
next 5 consecutive years
Department of Biochemistry 1 SEMI
AUTOMATED BIOCHEMISTRY
ANALYZER
SPECIFICATION FOR SEMI AUTOMATED BIOCHEMISTRY ANALYZER. I. Item : Semi Automated Biochemistry Analyzer with UPS 0.5 KVA. II. Analysis Option: a. Absorbance b. 1 point end linear & non linear. c. 2 point end linear & non linear. d. Rate linear & non linear. e. Immunoturbidimetry. OPTICAL SYSTEM III. Light Sources: Pre aligned Quartz halogen lamp. IV. Wave Length: Automatically Selectable narrow band interference quartz filter within wavelength of 340 -700 nm -- fixed seven or eight filters and two optional filters as per users choice. V. Measurement Time : Selectable. CUVETTE SYSTEM Cuvette : a. Flow cell Cuvette. b. External rectangular Cuvette. VII. Cuvette Temperature: Peltier control & programmable at 25˚C, 30˚C and 37˚C. VIII. Aspiration System: Motor driven pump.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 748 -
IX. Aspiration Volume: Programmable. X. Cuvette Blanking: Automatic. FUNCTIONS
XIII. Programmable Parameter: About 100 user defined test programs including routine biochemical parameters, enzymes, immunological markers, truly open system, selection through key- board. XIV. Calibration: Automatic against standard / calibration. XV. Quality control: a. 2 levels of control (at least) b. Levey - Jennings diagram. c. Manual entry of QC result. XVI. Memory Storage: a. Minimum 200 patients result. b. Calibration result. c. Quality control result for 01 month. XVII. Display: a. Graphic LCD. b. Display of reaction curve, absorbance, temperature. c. Display of result of real time. d. Graphical display of reaction time. e. Calibration curve graphical display. XVIII. Key board: a. Chemical and moisture prevented single touch alphanumeric membrane key panel. XIX. Printer: a. Built in thermal printer with full graphic facility. b. Parallel full page ink printer with formatting options.
OPERATOR INTERFACE
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 749 -
XX. Reporting format: a. Conventional b.SI unit(Optional/Interconvertible). XXI. Recalculation : Recalculation of result following modification of calibration, measurement timings and wavelength. XXII. Automatic Flagging: a. Absorbance and linearity cheek. b. Reagent stability. c. Substrate depletion. XXIII. Peripheral interfacing: a. Parallel ports for external printer , key- board and PC. Software PC Compatible. XXV .Power Cord : Indian Type 3-pin power cord locally available and replaceable . XXVI: Dust Cover : Washable dust-covers for main unit and key-board, etc. XXVII: Working Manual : Working Manual by
manufacturer in original
2 HbA1c analyzer Specification for HbA1c analyzer Analytes HbA1c Principle HPLC Technology Sample Volume Less than or equal to 3ml. Sample loading Should load (50-60) samples simultaneously capacity with continuous loading facility. Throughput < 8 minutes per sample Assay time Minimum Assay Time Assay Should be able to detect correct HbA1c values in the presence of
SOFTWARE
ADDITIONAL
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 750 -
commonly occurring abnormal haemoglobin variants. Primary tube sampling Facility should be there Calibrators External /Internal Control Control should provide External /Internal normal and abnormal control. Check facility Should be able to check all system parameters (cartridge, reagent, waste etc) CV < 3% Approvals Any two approval from the following CE / FDA /IFCC/NGSP approvals
3 Test Tube rack _________________________
4 Water Bath Rectangular
Water Bath Rectangular: Thermostatic control /; Boiling Water baths, with lids having 8-12 Holes with shaker Specification: Temperature range from ambient to 950C. Thermostatic control with an accuracy of +/- 10C. Double walled with inner wall of stainless steel and outer of MS powder coated, with lids of SS. The unit is provided with immersion type heaters to work on 220 V.A.C. The unit is supplied with indicating lamps. Main chord and Plug. Size of the inner chamber- 355x100mm; 1.5kw with shaker.
5 Colorimeter Specification:Photoelectric colorimeter with filter Digital Colorimeter - Highly Stable & accurate Ideal Clinical instruments for Blood & Chemical Analysis. Models Available ME 953 C 5 Filter ME 954 C 8 Filter ME 944 C 8 Filter With Battery Option. Range : 400 nm to 700 nm Filters 5 High Standard Filters, Accuracy ± 0.02 O.D., Reproducibility ± 0.01 O.D., Out Put Optical Density 0 to 1.99, Display 2 ½ Digit LED Display, Detector Selenium Photo Cell, Light Source 6.2 V 0.3 Amp. Tungston Filament Lamp, Min. Volume 1 µl., Power 230
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 751 -
V ± 10% 50 Hz AC, Size (LXBXH) 225 x 230 x 150 mm, Weight 4 kg. (Approx), Accessories Test Tubes 5 Nos, Light Source Bulb, Dust Cover, Instruction Manual.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 752 -
SL. NO. NAME OF
EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
Consumables & Accessories
Unit Cost For each
item
Expected life of the equipment
CMC rates for Post-Warranty
next 5 consecutive years
DEPARTMENT OF PHARMACOLOGY
1. Cannula-made of corning glass (Arterial- hollow bulb with three arms, Venous–hollow glass tube- 4-5cm length & 3-4 mm diameter Syms cannula)
2. Four Unit isolated organ bath palmer F.67 For Internal Organs with stirring arrangements, made of transparent acrylic sheet, chemically welded to make leak proof. Complete with uprights, organ & oxygen tubes, capillary tubing, and frontal lever etc.Temperature by immersion heater and control by thermostat.
3. Dissection instruments and injection syringes as required Sets containing surgical standard scissors-2, curved scissors-2, pointed scissors-2, artery forceps-2, Mosquito artery forceps-2, scalpel handle-2, plain forceps-2, toothed forceps-2, small retractors-2, etc. Probes-2, hooks-2. To be supplied with proper cover and box.
4. X-blocks as required(Open and Closed) Machined from solid Brass rod, richly chromium plated to hold 9mm, 6mm and 12.5 mm rods
5. Hook grip rods as required- Should be suitable to fit in an X-block
6. Plain stand
7. Hair Aesthesiometer-Palmer W.290
8. Copper Trays (10”x8”x1”)
9. Microscopes ordinary - With fixed bright filed two lens condenser and iris diaphragm, heavy metal stand with triple nose piece. Coarse adjustment by rack and pinion and fine adjustment by precision grade slow motion arrangement in a beautiful storing cabinet - Total magnification 675 x Eye pieces H10x, H15x Objectives 10x, 45x (spring loaded)
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 753 -
10. Chemical Balance – Sensitive Balance beam scale, capacity: 120g/0.01g 220g/0.01g 320g/0.01g 1200g/0.01g 2200g/0.01g 3200g/0.01g. Power AC/DC with lithium battery. Display: LCD/LED with back light. Fan size: diameter 130mm.
11. Skin and Rectal Thermometer Barun -
12. Starling's or Heart Lever:-This lever is used to record the contraction of heart. The differences between this & other isotonic levers is that fulcrum lies at one end beyond the point of attachment. It consist of a frame carrying a light lever arm with holes and notches supported by a fine adjustable nickel silver spring attached to an adjustable hook.
13. Microscope with mechanical Stage and oil immersion
14. Frontal writing lever - This lever is designed in such a way that the writing point rotates freely about its axle. This helps in reducing the tension between the smoked paper and the recording tip. The contraction are recorded as straight line
15. Fixit lever - the levers can be fixed to the spindle in the center p f which a vulcanite spindle on one of these pins lever fits, sliding through the frame is a rod carrying a spring that can be caused to bear against the roller its turning while other adjustment are made.
16. Colorimeters
17. Condon’s Drop Recorder-Palmer B-75
18. Jacquets graphic chronometer
19. Museum drugs specimen boxes rectangular, acrylic with cover. Sizes:- 9”x5”x4”(inch)& 6”x4”x3”(inch)
20. Microscope lamps - standard quality
21. Multimeter
22. Operating Table- JKA-172 : Suitable for Rabbits, Rats, Guinea Pigs and such like small animals. Top is of Stainless Steel and provided with adjustable head holder, tie-cleats, cut-back at the head-end with warming chambers.
23. Instrument Trolley (30”X18”X30”)
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 754 -
24. Instrument Trolley( 48”X24”X30”)
25. Manometer mercury glass U-tube (5 mm bore , two vertical limbs 30 mm height half filled with mercury (upto 250 mm of Hg)
26. Tracheal cannula metal ( z-shaped & y- shaped)
27. Bull dog clip
28. Rat holder- single u and ring pattern 38 mm with Universal joint
29. Mercury manometer –Meriam, All Manometers are fabricated from true-bore Borosilicate glass, floats are perfectly, lapped to eliminate leakage and are fitted with feather weight stainless steel capillary. Standard Mercury Mercury Manometers: Without stopcock, with adjustable scale.
30. Autoclave electric-small
31. Sterilizer electric size 12”x8”x6”
32. Stimulator electronic Arthus Thomas- Selectable pulse per second in different steps and pulse with, continuous variable volt in multiple of 1 and 10 with internal, external and single pulse mode
33. Flame Photometer
34. Manom
eters
Mercur
y
All Manometers are fabricated from true-bore
Borosilicate glass, floats are perfectly, lapped to
eliminate leakage and are fitted with feather weight
stainless steel capillary. Standard Mercury
Manometers: Without stopcock, with adjustable scale.
35. Marey’
s
Tambo
urs
Traditional (5cm to 10cm diameter)
36. Physio
graphs
with
(Earthing chord, chart paper, ink pen, ink etc.)
Recording system, amplifier, different couplers like bio
potential, EKG, strainage, pulse respiration,
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 755 -
transd
ucers,
couples
and
other
relevan
t
access
ories
temperature and isotonic couplers, speed selection is
easy and instantaneous. Channel width is 70 mm,
Ink writing pen is 120 mm in length to minimize arc
distortion. Main Amplifier is fitted in the console
having switch selectable sensitivity range from 50
microvolt per cm to 100 milli volts per cm in eleven
steps as 50,100,200,500 mv/cm and
1,2,5,10,20,50,100 mv/cm.
37 Kymog
raph
(studen
ts)
Electri
cal
indepe
ndent
unit
Electrically driven recording drums suitable for use by students for general experiments. Drive mechanism consists of Constant speed electric motor and accurate
Gear-box contained in the base together with robust plate clutch. Engagement of various gear ratios are effected by sliding the lever into the slot marked with
surface speed or by a knob in separate models. Main cylinder and Stainless Steel spindle have been
standardized to make the same universal and interchangeable. Double electric contact arms are clamped on the main spindle and a stout double-
contact block is fitted on top of the base. Gear ratios i.e. 640 mm, 320 mm, 25mm, 12.5mm, 2.5mm,
1.2mm, 0.25mm, and 0.12mm per sec, are effected by sliding lever into the slot marked with 8-surface speeds. Highly accurate speeds
Auto concentration curve (crc) mode and normal mode.
Sturdy body
Corrosion resistant
Low power consumption
Audio and visual alarm
Easy height adjustment
Writing lever
Starling Heart Lever
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 756 -
Isometric Lever
Vibrating read, variable interrupter Time marking – tuning fork (100 hz), spring time
marker, electromagnetic time marker
38 Trache
al
Canula
Metal
Made of Brass with adjustable Air-vent. Should be
able to use for endo-tracheal intubation of big animals
like Dog & Cats
39 Weighi
ng-
Machin
e for
small
animal
s like
rats
and
guinea
pig
Animal weighing scale; Livestock scale: slip proof-pan,
waterproof-design, with railing and door. High legs for
rough ground
40 Weighi
ng-
Machin
e for
big
animal
s like
cats
and
Animal weighing scale; Livestock scale: slip proof-pan,
waterproof-design, with railing and door. High legs for
rough ground
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 757 -
dogs
41 Appara
tus for
isolate
d
rabbit
intesti
ne
A Cylindrical copper bath with heating element
controlled by thermostat. Complete unit with
uprights, glass inner vessel and oxygen tube with
platinum tip frontal lever from SS capillary tubing,
fitted on teak base board
42 Animal
trolley
with 12
cages
Fabricated from 1 square hollow pipe and angel of S.S.
304 quality material. The racks are mounted on four
heavy duty 4, dia castors for easy handling and quiet
transportation. Complete with argon arc joints and
mirror finish. Available to hold 24 animal cages of
size: 29X22X14 cms. (LXBXH). Rack size: 39X12X60
(LXBXH).
43 Dissect
ion
Instru
ments
Sets containing surgical standard scissors-2, curved
scissors-2, pointed scissors-2, artery forceps-2,
Mosquito artery forceps-2, scalpel handle-2, plain
forceps-2, toothed forceps-2, small retractors-2 etc.
Probes-2, hooks-2,. To be supplied with proper cover
and box.
44 Frog
Boards ____________________
45 Stop
watche
s
Digital – Digital Stop Watch, Digital Stop Watch is
perfect for any laboratory applications. The large LED
display, high resolution enhances the functionality in
several of situations. These are available in two
ranges as per specification. Range 1:99:59:59
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 758 -
Hrs:Min:Sec. Resolution: 1 sec (for range 1)
Min:Sec:Milisec. Range 2:99:59:99 Hrs: Min: Sec
Resolution: 10milisec (for range 2) Display: 6 digit
LED Display Alarm: Buzzer after set time.
46 Chemic
al
balance
-
ordinar
y
apothe
cary’s
Best quality with divided doors show case, capacity
250 gms. Sensivity 1-2 mgm having all stone agates
fitted in open graduated beam
47 Pill
tiles
______________
48 Porceli
n
dishes
______________
49 Pestle
and
Morter
______________
50 Iron
spatula
______________
51 Horn
spatula
______________
52 Galli
pot/oi
ntment
______________
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 759 -
pot
53 Glass
rods
______________
54 Plethys
mograp
h
assorte
d
High Resolution Volume.
Resolution: 0.01 ml, Accuracy+/-0.01ml. Easy to use pedal switch. LCD Graphic Display
55 Antihis
tamine
chamb
er with
manom
eter
Should be a complete Histamine aerosol apparatus
having a acrylic box with nebulizer
sphygmomanometer and chloroform bellows for assay
of antihistamine drugs on guinea-pig etc.
56 Actoph
otomet
er
(activit
y cage)
The frame is equipped with 32 infrared photocells, 16
placed in axis X and 16 placed in axis Y. The
Photocell work at a wavelength of 950 nm and its
information is multiplexed at a rate of 40Hz. Hole
board plate is provided with 16 holes of diameter and
detection depth. It should contain incorporated
electric facility (variable) 0 to 100 volts for activating
rats and indicating on meter.cm
57 Rotaro
d
Assemb
ly
Should have 5 chambers, 75 mm width each with a rotating rod of 25mm diameter having speeds of 5.10
to 15.20 and 25 r.p.m.
Digital rpm indicator and digital time counters.
Each counter runs from the beginning of the test until the animal falls from the drum to the lane.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 760 -
Electronic change of speed from 4-120 rpm.
58 Electro
convul
siomet
er
Should be able to use for producing minimal and
supra minimal seizures required for assaying of anti-
epileptic and anticonvulsant drugs. Should provide
minimum 50Hz stimulus current which can be
adjusted 0.15mA to 330mA in steps, with one pain
corneal electrode 4,6 or 8mm cups. And one pair of
ear clips work on 220 AC. Should contain electronic
timer device from 0.1 to 3 seconds in steps to control
the stimulus current and LED indicator for duration of
stimulus.
59 Analge
siomet
er
Thick pure aluminum plate (12mm) provides a
very high temperature stability and even surface distribution.
Plate temperature can be held at a set point
between above ambient to 70 degree C (+/-0.2 degree C).
A built-in timer activated by an external foot switch allows the precise measurement of the
reaction time (0.1 sec resolution).
Remote foot-switch controls the test start/stop
allowing rapid Hands-free experiments. Provided with the calibration certificate of the
temperature indicator.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 761 -
60 Cooke’
s pole
climbin
g
apparat
us
Should be having 2 (two) chambers, an outer chamber
made of thick plywood sheet with an observation
window and inner animal chamber made of clear
acrylic sheet with a brass bar at the bottom. A built
in shock of 200V AC, 50 Hz single phase with min of
0.2mA and is to be controlled by min of 11 position
solid state timer up to 30 seconds. Should be having
output terminal for kymograph recorder. Animal
dropping tray to be provided to keep the equipment
clean.
61 Metabo
lic cage
(diureti
c
study)
Classic metabolic cages with electronics to monitor the
receptacles for food and water. Each may be removed
without disturbing the animal. Optional infrared
beam arrays (similar to those of the Activity Cages)
can be mounted on either side of the cage to monitor
coordinate activity and rearing behavious. Each cage
is comprised of interchangeable parts which can be
cleaned in a standard vivarium wash station.
62 Tablet
Disinte
gration
machin
e glass
tubing
(length
of 6ft)
Hooper diameter of minimum 2”. Should be fitted
with min 4 steel hammers fixed to a disc and Shaft
being revolved at the speed of 3000 RPM. Rotation in
vertical manner is made by EHP Motor which carries a
specially designed Basket to hold 6 nos. of
Tablets/Capsules under specified weight, moving
vertically in temperature controlled glass
vessels/Beakers placed on Hot Plate. Having special
type of starter facility operatable on 220 volts AC
supply.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 762 -
SL. NO. NAME OF
EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
Consumables & Accessories
Unit Cost For each
item
Expected life of
the equipme
nt
CMC rates for
Post-Warranty next 5 consecutive years
DEPARTMENT OF ANESTHESIOLOGY (MANICKTALA)
1 Monitor for Continuous Measurement of Cardiac Function
A. Monitor for Continuous Measurement of Cardiac Function:
1. It should be arterial line based continuous monitoring device
for Cardiac output, Cardiac Index, Systemic Vascular Resistance
and Stroke Volume.
2. It must be supplied with good quality display device and ten
Flotrac and necessary catheter system.
3. The device should be compatible with Flotrac sensor system
4. Necessary accessories should be supplied for systemic vascular
resistance measurement
5. It must be CE and/or FDA certified
2 Monitor for continuous measurement of body tissue oxygenation and oxygen delivery status
B. Monitor for continuous measurement of body tissue oxygenation and oxygen delivery status:
1. It should be auto-calibration based arterial-venous line based
measuring device to provide continuous measurement of
ScVO2, SvO2 , Extra vascular Lung water index and Ejection
fraction as well as End Diastolic volume of heart
2. The monitor should be supplied with 10 (ten) relevant and
related sensors for measurement of hemodynamic variables
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 763 -
3. Suitable display and storage device for data should be supplied
4. It should be CE and/or FDA certified
3 Instant Hand held blood pH and Lactate monitor
D. Instant Hand held blood pH and Lactate monitor: 1. Portable, cartridge based hand held device capable of
measuring blood pH, Lactate and other variables such as
Troponin, Ionised Calcium, Prothrombine Time, Creatinine
Kinase-MB and Brain Natriuretic Peptide
2. Measurements should be quantitative in nature
3. It should be supplied with wireless based printer and electronic
simulator for calibration
4. It must be FDA and/or CE certified
4 Lumber Puncture Simulator with Epidural block trainer
E. Lumber Puncture Simulator with Epidural block trainer: 1. The device should be a 3D image guided one suitable for
training of epidural needle insertion
2. It should be based on real time motion picture based capturing
system with display of procedure on screen
3. The system should be capable of evaluation of trainee’s
performance
4. All relevant interfaces and accessories should be supplied with
the simulator
5. It must be FDA and/or CE certified
5 Spinal Injection Trainer
F. Spinal Injection Trainer: 1. Mounted trainer should be able to be used multiple times
2. It should be supplied with three sets of accessories like fluid
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 764 -
bags and simulators
3. One vertebrae must be visible for proper identification of
performance site
4. Trainee should be able to be guided by perceptible tissue
resistance while going through different levels of tissues
5. It should be CE and/or FDA certified
6 Central
Venous Catheter Simulator
G. Central Venous Catheter Simulator: 1. Simulator should have life like anatomical structures for
identification of parts related to central venous catheter
insertion
2. It should allow trochar and guide wire insertion for complete
training
3. Device should be supplied with five replaceable skin pads for
each site of training
4. It should be supplied with all accessories like artificial blood
(two units), fluids, spare vessels (two numbers), battery and
other relevant items
5. Facility to check correct position of catheter placement should
be there
6. It should be CE and/or FDA certified
7 Cricotracheotomy trainer
H. Cricotracheotomy trainer: 1. It should be able to train routine as well as percutaneous
tracheotomy procedure
2. It should have easily palpable anatomical land marks for
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 765 -
identification of structures
3. Trainer must be steady in nature and should be supplied with
five sets of spare skin for cricotracheotomy
4. It should be CE and/or FDA certified
8 Peripheral
Nerve Stimulator/ Locator
I. Peripheral Nerve Stimulator/ Locator: 1. The device should be able to locate nerves percutaneously
through electrical stimulation based technique
2. It should be able to be used with monopolar as well as bipolar
based stimulation technology
3. Current intensity preferably be between 0 to 60 mA and
stimulating impulse upto 1ms
4. Should be able to measure and display actual current passing
through tissues
5. It must be supplied with insulated cannula , ten in number
each for size 22, 24 & 25 G as well as re-chargble battery and
charger.
6. Needle quality should be able to give best image under
ultrasound guided procedures
7. It should be FDA and/or CE certified
9 Multi-frequency based deep heat generator
J. Multi-frequency based deep heat generator: 1. Equipment should be multi-frequency based dual outlet
heat generator using long waves with a emission frequency range between 450 to 500 KHz
2. It must have coupling system of capacitive and resistive therapy system for heat generation at different depth of
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 766 -
application area
3. Electrode pairs and handle tips with various diameters such as 30,50 and 70 mm must be supplied with the equipment
4. Power must be 100 W/KOhm or more
5. It should be CE and / or FDA certified
10 Airway management Trainer:
K. Airway management Trainer: 1. Trainer must have good quality land marks of upper airway
and pulmonary structures for proper identification during intubation training.
2. It should allow various techniques of intubations and different methods of airway related activities like application of suction, Sellick’s maneuver, observation of pupil and carotid pulse palpation
3. It should be supplied with two sets of artificial lungs
4. It should be FDA and/or CE certified
11 Handheld instant hemoglobinometer with facility to measure Methaemoglobin
L. Handheld instant hemoglobinometer with facility to measure Methaemoglobin:
1. It should be able to be applied to patients of all age groups and
necessary probes/accessories to be supplied in two in numbers
for each age group
2. It should work even in low perfusion status and should be least
interfered by electrical disturbances
3. It should be able to provide pulse variability index, blood
hemoglobin and methemoglobin level non-invasively on
continuous as well as point of care basis
4. Perfusion index should be between o.o2 to 20%
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 767 -
5. Waveforms and/or digital display mode of presentation
6. It should be FDA and/or CE certified
12 NUCLEO
PLASTY SYSTEM
1. It should work on principle of Co-ablation
2. It should work through generation of bipolar
Radiofrequency without requiring grounding
3. Terminal end temperature generation must not be
above 70 degree C
4. It should be capable of being used in both Lumber
and Cervical region
5. Supplied probe must have depth penetration marks
and stop lock for safety and control.
6. It must be supplied with 17G (6 inch) and 19G (3inch)
accessory needles, 5 needles of each size.
Respective size Probe also to be supplied.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 768 -
SL.
NO. NAME OF EQUIPMENT
& INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
Consumables & Accessories
Unit Cost For each
item
Expected life of the equipmen
t
CMC rates for Post-Warranty
next 5 consecutive years
Department of Forensic Medicine(For ESI-PGIMSR, JOKA)
1 Clinical thermometer Traditional type
2 Stykar autopsy saw
with accessories Light weight equipment, 10 feet cord with hospital grade plug -should cut bone easily to minimise operator fatigue - Saw should be attached to HEPA bone dust collector.
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 769 -
SL.
NO. NAME OF EQUIPMENT
& INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
Consumables & Accessories
Unit Cost For each
item
Expected life of the equipmen
t
CMC rates for Post-Warranty
next 5 consecutive
years
Department of Community Medicine (For ESI-PGIMSR, JOKA)
1 Horrock’s
Apparatus
(Complete set
with chemicals &
Manual)
_____________________
Dept. of Human Physiology
DEPARTMENT OF HUMAN PHYSIOLOGY SL.
NO. NAME OF
EQUIPMENT & INSTRUMENT
SPECFICATION Make/Model No. (to be filled in by tenderers)
Company /Manufacturer (to be filled in by tenderers)
Consumables & Accessories
Unit Cost For each
item
Expected life of
the equipm
ent
CMC rates for Post-Warranty
next 5 consecutive
years
40 Audiometry Audiometry & Tympanometry in one instrument; potable - demo piece; special Audiometry window; MPANL (maximum permissible ambient noise level) specified internationally by standard institutes like OSHA and ANSI for proper acoustic treatment
C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 770 -
Total 526 items