(subsidiary of hll lifecare ltd., a government of india...
TRANSCRIPT
M/s HLL Infra Tech Services Ltd. (HITES)
(Subsidiary of HLL Lifecare Ltd., A Government of India Enterprise)
For & on behalf of
U.N. Mehta Institute of Cardiology & Research Centre
(Affiliated to B. J. Medical College), Ahmedabad, Gujarat
E-TENDER
FOR
Design, supply & installation of Signages
For Proposed New Construction of Phase II Paediatric Cardiac
Hospital building (GRIHA 3 star), Hostel Block & Underground
Parking on Ring Road of Civil Hospital at U.N. Mehta Institute of
Cardiology & Research Centre, Ahmedabad, Gujarat
Volume- IV
TECHNICAL SPECIFICATIONS
Tender No. HITES/IDN/UNM- AHD / Sign/2018-19
B-14A, Sector – 62,
NOIDA (UP) -201307 Phone no: 0120-4071500, Fax no: 0120-4071513
UNMICRC expansion project Phase – II: Design, supply & installation of Signages Vol-IV- Tech. Specifications
Tender No. HITES/IDN/UNM- AHD / Sign/2018-19 Page 1
TECHNICAL SPECIFICATIONS AND DESIGN DETAILS OF VARIOUS
SIGNAGES
1. SCOPE a. This document covers the architectural design concepts, technical
specification & suggested details for the manufacturing of the signage.
Detailed designing, construction, fabrication, assembling including painting,
finishing, cladding electrical work etc. should be carried out by the vendor and
shall conform in all respects to high standards of design, engineering &
workmanship.
b. The drawing given with the tender for different signage elements is indicative.
The detailed fabrication drawing, shop drawing, mock ups, Flex materials
cladding / fixing details, design to fit size should be developed by the vendor
and submitted to UNMICRC/HITES for approval. The vendor shall develop
the prototype for each category as per the approved drawing, graphic detail
and submit to UNMICRC/HITES for approval. Prototype should be offered
for inspection and approval complete in all respects including fabrication of
frame/structure, painting, electrical work, cladding, graphic application,
including testing and functioning of the sign complete in all respects.
c. Detailed assessments and provision should be made for ease of internal &
external maintenance.
2. BASIS OF DESIGN
a. All signage covered under this specification shall be good for installation and
operation in UNMICRC at Ahmedabad, Gujarat in India.
b. All signage, except where specified as indoor, shall be good for outdoor
installation without any shade/cover/protection.
c. All illuminated signs shall be suitable for operation from dusk to dawn
everyday throughout the year.
d. All outdoor signages should be designed to withstand all climatic conditions.
e. LED lights of required wattage and numbers shall be placed in such a manner
to achieve uniform lighting of the signage (min one LED light (4ft) size per 4
sqft area). It shall be ensured that no dark patches, hot spots, shadows and
light leaks appear when the lights are turned on.
f. The design of signage shall facilitate easy maintenance & re-lamping. The
maintenance doors/panels should remain water/dust tight during normal usage.
3. CODES AND STANDARDS
a. The signage supplied by the vendor shall conform in all respect to the standard
listed below. Latest editions of these specifications shall be referred.
UNMICRC expansion project Phase – II: Design, supply & installation of Signages Vol-IV- Tech. Specifications
Tender No. HITES/IDN/UNM- AHD / Sign/2018-19 Page 2
Steel Fabrication & Painting:- IS : 800 and IS:801
Structural Steel: - IS: 2062 (Weldable quality)
Structural bolts: - IS: 1367 of Class 8.8
Welding electrodes: - IS: 814.
Welding procedure :- IS : 816, IS : 1024, IS : 1261, I S : 1323 and IS : 9595.
Structural steel hollow section: - IS : 4923.
b. Electrical works
i. The wires running inside the signage box shall not run/hung loose. The
wires shall be taken inside the Conduit / PVC sleeve and all cable shall be
saddle properly, which shall be properly supported. All wiring should be
numbered with ferrules.
ii. It shall be possible to maintain & replace, light fittings, chokes etc. inside
the signage, without dismantling the signage by providing adequate space
inside the signage and providing suitable removable entry/access
doors/covers.
iii. Rubber grommet shall be used at the circuits for entry of wires to the sign
box.
iv. All lighting work shall be completed in all respects even if not indicated
and spread of light should be uniform.
v. All the electrical equipment except lighting fixtures to be located inside the
signage board shall be weatherproof and suitable for outdoor duty.
vi. Work shall be performed in conformity with the specifications /Codes of
practice of the Bureau of India Standards. In case of any conflict,
stipulation given in tender document shall govern.
vii. Junction box should be provided at suitable places for the backlit signages.
viii. In addition, work shall also conform to the requirements of latest editions
/amendments of the following:
Indian Electricity Act and Rules.
Fire Insurance Regulations
Regulations laid down by Central Electricity Authority.
Any other regulation by the Central/State/Local Authorities from
time to time during execution of this contract.
c. Powder coating
Standards for Powder coating (Pure Polyester based powder to be used for
powder coating of all frames ) are as follows:
ASTM D 523-60 : Gloss 60º
ASTM D-5870 : Cross hatch adhesion
UNMICRC expansion project Phase – II: Design, supply & installation of Signages Vol-IV- Tech. Specifications
Tender No. HITES/IDN/UNM- AHD / Sign/2018-19 Page 3
ASTM : 3363 : Pencil hardness
ASTM D-2794 : Impact resistnace
ASTM B-117 : Salt Spray resistance
ASTM D-2247 : Humidity resistance
IS 1477 : Spray Painting.
d. Surface Preparation for Powder coating
Prior to painting, surface should be free of any visible loose particles, welding
spatters or foreign bodies. The structural hollow tube should be treated with
seven tank treatment for removal of grease in the degreasing tanks, cleaning of
surface with water in Rinsing tank, acid treatment in pickling tank , cleaning
of surface inwater tank & treatment of surface with chromate & phosphate.
Surface should be suitably cleaned to achieve require finish as per relevant
ASTM standard. The DFT for the powder coating should be between 70 -100
micron.
e. Painting ( PU coating paint )
Prior to painting, surface should be free of any visible loose particles, welding
spatters or foreign bodies. The surface preparation for painting shall be made
by thoroughly descaling & cleaning of surface for application of paint .
Painting of surface should be carried out by Air spray painting methods.
The primer shall be one coat of zinc phosphate of 35 micron DFT. Second
coat of primer shall be of high build MIO (50 micron) . The total thickness for
the primer coat shall be 85 micron DFT.
Finish shall be with PU coat in not less than two coats. Paint to be mixed as
per manufacturer specification to get the required colour. Apply the paint in
two or more coats to achieve 80 micron DFT (40 micron DFT each coat).
The first coat of primer must be applied on dry surface immediately and in any
case within 4 hrs of surface treatment. Applied paint shall have required Dry
Film Thickness (DFT) after drying. Each coat shall be in a proper state of cure
or dryness before the application of succeeding coat. Manufacturer’s
instruction shall be followed for intercoat interval.
All welded joints shall be buffed and coated with stripe coat of Zinc phosphate
& epoxy zinc phosphate primer prior to taking up the finished coat.
Any part of mild steel portion below ground level shall be painted with three
coat of red lead paint.
4. COLOURS
Colour of the signage shall comply with approved shades. Vendor shall submit colour
samples of vinyl film & paint to obtain clearance before proceeding with the
art/painting work for all relevant signage.
UNMICRC expansion project Phase – II: Design, supply & installation of Signages Vol-IV- Tech. Specifications
Tender No. HITES/IDN/UNM- AHD / Sign/2018-19 Page 4
5. TESTING OF MATERIALS
All the materials shall be procured from approved manufacturer as per the
specification and shall be accompanied by Manufacturer Test certificate.
6. INSPECTION OF WORK
Vendor to facilitate to carry out the inspection of materials, works, fabrication at their
works and at the site during the installation by UNMICRC/HITES representative as
per the scope of work.
7. TECHNICAL SPECIFICATION OF MATERIAL
Specification for Flexible substrate
The flex used in making the sign face shall conform to the following specifications
Property Value
Thickness 0.056cm +/- 0.005
Gloss at 60° 17.5 +/- 10
Whiteness Index 110 +/- 10
Color L*=90, a*=+70, b*=11.5
Light Transmission 26 +/- 2%
Tear strength
Weft -13kg/cm
Warp - 18kg/cm
Tensile strength
Weft -24kg/cm
Warp - 24kg/cm
Flammability ASTM E-84 class - I
U.L recognition UL-48 recognized for sign accessories
Along with the above, the flexible substrate should bear a watermark clearly showing
the brand and material type. The flex should be coated on both sides with a dirt
resistant coating.
Specification for vinyl
Property Value
Tensile Strength 0.8-0.9 kg/cm at 23°C
Applied Shrinkage Max 0.5mm
Service Temperature -40°C to +75°C
Adhesion Strength Arcylic,
Uncoated,clear Polycarbonate 0.5 kg/cm
Film Characteristics
Film Description 0.050mm translucent vinyl
Thickness film & adhesive 3 to 4 mil (0.08 to 0.010mm)
Adhesive type & color
Permanent pressure sensitive clear adhesive
Liner Synthetic liner
UNMICRC expansion project Phase – II: Design, supply & installation of Signages Vol-IV- Tech. Specifications
Tender No. HITES/IDN/UNM- AHD / Sign/2018-19 Page 5
Application Surfaces Flat without rivets
Min Application Temperature 16°C
The vinyl should be RoHS complaint, confirming to EU RoHS standards
Warranty:
• Contractor should provide a Comprehensive Warranty from the single source
manufacturer of the translucent vinyl and the flexible substrate for a period of at least 6
years.
• On completion of work, the Contractor must submit a warranty document from the
Principal Manufacturer having direct presence in India (not Liaison office / dealer /
Representative Office / Distributor / Agents / Reseller / Importer) of the translucent
vinyl and the flexible substrate.
• The Authorized personnel of the Indian Subsidiary / branch of the Principal
Manufacturer should validate the Comprehensive Warranty with the Name clearly
indicated and signature provided for the same.
• The Contractor should be an Authorized Contractor of the Indian Subsidiary / branch
of the Principal Manufacturer of the translucent vinyl and the flexible substrate.
• Warranty should be issued by a notified solution provider by virtue of being a branch
/ subsidiary and enforceable in Indian Law court.
• The Signs should be warranted by the Indian subsidiary / branch of the Principal
Manufacturer for all sorts of Indian weather and dust conditions without any sub
clauses for high Traffic areas / high Pollution areas / high temperature areas.
• This means that there should be tested field warranties and not just product
warranties.
Warranty should be against:
1. Yellowing / Graying of Flex
2. Wicking of flex
3. Fungus or Mildew formation
4. Vinyl peel-off, fading, shrinkage, cracking and crazing
• The Authorized Contractor’s final bills would be cleared only on submission of the
duly endorsed Warranty Documents that fulfill all the above conditions.
8. LIST OF APPROVED MAKE OF MATERIALS
Sr No Materials Approved makes
1. ACP Alpolic , Alcobond , Renybond
(3 mm / 0.3 mm thick)
2. Vinyl 3M (Scotchal 3630 series,
3650 series,7725 series)
3. Steel SAIL, Tata, Jindal
4. LED lamps Philips , Wipro, Surya, Havells
UNMICRC expansion project Phase – II: Design, supply & installation of Signages Vol-IV- Tech. Specifications
Tender No. HITES/IDN/UNM- AHD / Sign/2018-19 Page 6
5. Ballast (copper) Philips, Crompton, Wipro, Havells
6. Starter Philips, Crompton , GE , Wipro, Havells
7. Tube connector ISI approved.
8. Wires (copper) Finolex, Polycab, National, Rallison
9. Cable (copper) Polycab, ICI
10. Powder coating Asian, Nerolac , Berger
(all pure polyester based powder)
11. Aluminium sheet/angle Hindalco, Jindal , Bhoruka
12. G I sheet Tata, SAIL
13. PU paint/ primer Asian , Berger , Nerolac
14. Flex material 3M ( Panaflex Series 945 GPS)
(Flexible fabric)
15. Retro reflective sheet 3M (Reflective H I grade)
16. Laminate film 3M (Series – 8519)
17. Exterior acrylic paint Berger, Asian, ICI
18. Light enhancement film 3M make
9. TECHNICAL SPECIFICATION FOR SIGNBOARDS COMPONENTS
1. Vinyl signboards
Board material Aluminium composite panel (3mm, 0.3mm Aluminium sheet with PVDF
coating) with 1.5” X 1.5” Square MS pipe (16 gauge) with PU coated frame with vertical
support for every 4 ft. Vinyl lettering 3M 3630 / 3650 series , 7725 series
Job scope includes fabrication, transportation and installation at site using PCC.
2. Backlit signboards with Extruded Aluminium side panels (6” depth) a. Main frame for the box 1.0” square MS pipe (16 gauge) with PU coating.
b. Tensioning system Klick rail system with Allenky bolt (mechanical tensioning)
c. Back panel 24 gauge pre coated GI sheet Top, Bottom & Side panels 6” Extruded
Aluminium side panels (16 gauge) powder coating.
d. Electricals Philips/GE LED tubes with appropriate fittings
e. Flex 3M Panaflex
f. Vinyl 3M 3630 series
UNMICRC expansion project Phase – II: Design, supply & installation of Signages Vol-IV- Tech. Specifications
Tender No. HITES/IDN/UNM- AHD / Sign/2018-19 Page 7
g. Reflector Light enhancement film.
h. Laminate 3M 8519 series laminate
i. Job scope includes fabrication, transportation and installation in all respects including
grouting in
j. PCC at location.
3. Backlit signboards with Aluminium sheet side panels (11” depth)
Main frame for the box 1.0” square MS pipe (16 gauge) with PU coating.
Tensioning system Klick rail system with Allen key bolt (mechanical tensioning)
Back panel 24 gauge pre coated GI sheet
Top, Bottom & Side panels 16 gauge Aluminium sheet, powder coated
Electricals 4 ft Philips/GE tubes with copper chokes/ starters of Philips/ GE
Flex 3M Panaflex
Vinyl 3 M 3630 series
Reflector Light enhancement film
Laminate 3M 8519 series laminate
Job scope includes fabrication, transportation and installation at site in all respects including
grouting in PCC
4. ACP Sprouts (without Vinyl)
Sprout material Aluminium composite panel (3mm, 0.3mm Aluminium sheet with PVDF
coating) with 1.5” X 1.5” Square MS pipe (16 gauge) frame with PU coating with vertical
support for every 4 ft.
Job includes Fabrication and supply of sprouts in Aluminum Composite Material (ACP) and
installing them on sheds & Gates with frame as per requirement. (Refer picture).
Area of the rectangle that can contain the sprout will be considered for payment.
5. Reflective signboards
Board material Aluminium composite panel (3mm, 0.3mm Aluminium sheet with PVDF
coating) with 1” X 1” Square MS PU coated / powder coated (14 gauge)
frame with vertical support for every 4 ft.
Vinyl 3M Reflective H I grade
Laminate 3M 8519 series laminate
Job scope includes fabrication, transportation and installation at site as required in 1:2:4 PCC.
6. MS Square Pipe 3” X 3” (14 Gauge) with two coat of PU paint of approved shade as per the specification for
the support structure for installing the sign boards.
UNMICRC expansion project Phase – II: Design, supply & installation of Signages Vol-IV- Tech. Specifications
Tender No. HITES/IDN/UNM- AHD / Sign/2018-19 Page 8
7. MS Square Pipe
2” X 2” (20 Gauge) with two coat of PU paint of approved shade as per the specification
for the support structure for installing the sign boards.
UNMICRC expansion project Phase – II: Design, supply & installation of Signages Vol-IV- Tech. Specifications
Tender No. HITES/IDN/UNM- AHD / Sign/2018-19 Page 9
Details of Signage for U N Mehta Institute of Cardiology & Research Centre
A INTERNAL SIGNAGES
Sr.
No. NAME OF ITEM DESCRIPTION OF ITEM Code Image Requirement for Area
1 Way finding Signs
Directory Signage
Design, Composition, Supply & Installation of
(A) Digitally printed vinyl (3M 1220 Series) on HP Latex
Printer pasted reverse side on 6mm thick Acrylic sheet
(1) Hanging with SS Chain (Approx. 2ft. )
WFA1B
WFA1A Hospital Corridor
(2) Mounted on wall with 1in. SS Mirror Screw WFA2
Departmental Signage
on wall
Design, Composition, Supply & Installation of
(B) 4 inch. thick box made from MS pipe & cladded with
3mm Router cut ACP sheet, LED Modules of Samsung or
Equivalent with appropriate power supply & ISI mark
Electrical fitting. Inside Graphics on 3mm thick Acrylic sheet
with digitally printed 3M vinyl on HP Latex Printer
WFB1
Auditorium, VIP
Lounge, OT, Cath Lab
etc.
2
Name Plates Design, Composition, Supply & Installation of
(1) 3MM thick acrylic plate with digitally printed 3M vinyl on
HP Latex Printer pasted on reverse side and fixing with SS
Mirer screw.
NP1
Doctors & Nurse
Departmental
Signages, Cautionary
Signages, Danger
Signages, Mandatory
Signages, Hazard
Signages, Think
Signages, Information
Signages,Hospital
Signages, As per
NABH & MCi
Requirement Signages
Design, Composition, Supply & Installation of
(2) 3MM thick acrylic plate with digitally printed 3M vinyl on
HP Latex Printer pasted on reverse side and fixing with
0.50 inch. SS studs.
NP2
Design, Composition, Supply & Installation of
(3) 5MM thick acrylic plate with digitally printed 3M vinyl
on HP Latex Printer pasted on reverse side and fixing with
1 inch. SS studs.
NP3
Design, Composition, Supply & Installation of
(4) Supply & Installation of 5MM thick acrylic plate with
digitally printed 3M vinyl on HP Latex Printer pasted on
both side and fixing with "D" clamp on wall.
NP4
Design, Composition, Supply & Installation of
(5) 3 MM thick foam sheet with digitally printed 3M vinyl
with lamination on HP Latex Printer pasted and fixing with
SS Mirer screw/ Double sided tap.
Note: 1st Layer - White Vinyl : 2nd Layer - Printed clear
Vinyl : 3rd Layer - Acrylic Sheet
NP5
3
Changeable Name
Plates with
Printing:
Design, Composition, Supply & Installation of
(1) 3 mm thk. Clear Acrylic Sheet with reverse side vinyl
Printing with suitable sliding arrangement.
Note: 3MM Clear Acrylic sheet bended from Top & Bottom
will be fix on wall, 2MM Clear sheet with printed vinyl
pasted on it will insert & will be changeable.
CNP1
OPD Area, Waiting
Area, Doctor Duty list,
Unit wise Signages,
As per NABH & MCi
Requirement Signages Design, Composition, Supply & Installation of
(2) PU Coated Anodized Aluminium profile plates with
suitable wall mounting eye-hooks, 0.5 mm thk. Clear
Acrylic Sheet with reverse side Quilt 3M vinyl on HP Latex
Printer, Printing with suitable sliding arrangement.
CNP2
4 Notice Board
Signages :
Design, Composition, Supply & Installation of Powder
coated/colour coated MS Angle frame with 5 mm thk. White
Milky Acrylic Sheet suitable system for hanging OR Fix on
Patient’s Bed Side OR Wall Mounting.
NB
Various Department,
Patient Bed Side, As
per NABH & MCi
Requirement Signages
UNMICRC expansion project Phase – II: Design, supply & installation of Signages Vol-IV- Tech. Specifications
Tender No. HITES/IDN/UNM- AHD / Sign/2018-19 Page 10
Electrical fitting.
6 Auto glow/Night
Glow Signage
Design, Composition, Supply & Installation of Digitally
printed auto glow film on HP Latex Printer with gloss vinyl
pasted on 3mm acrylic sheet and fixing with SS Mirer
screw/Double sided tap.
AGS
All Various department
Fire Safety Emergency
Signages
7 Exhibition
Displays
Roll-up Standee :
Design, Composition, Supply & Installation of Size : 3’ x 6’
Ft. PU Coated Aluminium Section with heavy spring
mechanism, base stand, lock key to facilitate easy
changing of banners with Echo Solvent Black back Flex
Printing , top side media holding section with end caps,
carry bag.
ED
OPD Waiting, Floor
wise Waiting Area,
Information of
Preventive Cardiac
Care
8 Adhesive Tap
3 M Double Sided Acrylic
Supply of 3M Tap It is a black, 1 inch modified acrylic
adhesive with a very conformable, foam core. It can replace
rivets, welds and screws. The fast and easy to use
permanent bonding method provides high strength and
long-term durability. It offers design flexibility with its
viscoelasticity and powerful ability to bond to a variety of
surfaces.
• Fast and easy-to-use permanent bonding method
provides high strength and long-term durability • Virtually
invisible fastening keeps surfaces smooth • Can replace
mechanical fasteners (rivets, welding, screws) or liquid
adhesives
• Black, 1inch , modified acrylic adhesive and very
conformable acrylic foam core bonds to a wide variety of
substrates including powder coated paints and irregular
surfaces
• Eliminate drilling, grinding, refinishing, screwing,
welding and clean-up
• Creates a permanent seal against water,
moisture and more by offering better gap filling capabilities
• Pressure sensitive adhesive bonds on contact to
provide immediate handling strength
• Allows the use of thinner, lighter weight and
dissimilar materials
AT
Pasting for Signages
Material
Supply of High performance Volume floor marking tape is
premium quality Reflective PVC tape, which uses an
aggressive pressure sensitive rubber -based adhesive
system . it combines excellent mechanical strength , easy
9 Floor Marking Tap transversal tear-ability and abrasion resistance with
excellent conformability for use in lane marking and flooring
application . excellent resistance to abrasion , corrosion
and moisture with a higher abrasion and mechanical
resistance . suitable for indoor and protected outdoor
environments.
Fire safety, Patient
guide Way Finding,
Staircase, Car Parking
As per NABH & MCi
Requirement Signages
(1) 1 Inch. FM1
(2) 2 Inch. FM2
(3) 3 Inch. FM3
5 Glow Sign Board
Design, Composition, Supply & Installation of 4 inch thick
ACP Box, MS pipe structure fix inside with 3mm Acrylic
sheet with digitally printed 3M backlit vinyl on HP Latex
Printer, Display both side, LED Modules of Samsung or
Equivalent with appropriate power supply & ISI mark
GS
Floor wise Reception
Area, Auditorium,
Hostel Building
UNMICRC expansion project Phase – II: Design, supply & installation of Signages Vol-IV- Tech. Specifications
Tender No. HITES/IDN/UNM- AHD / Sign/2018-19 Page 11
10 Infrormatry Kiosk
Design, Composition, Supply & Installation of Panel Type
a-Si TFT-LCD , Panel, Panel Size 58 inch, Resolution
3840(RGB)×2160 , UHD, Display mode Super MVA,
Normally Black, Trans missive [[Pane look copyright, copy
is strictly prohibited] IPS Family: AAS, ADS, AHVA, FFS,
IPS, New Mode2, PLS, SFT, Vista rich VA Family: ASV,
HVA, MVA, PVA, SVA, UV2A, VA], Surface Anti-Glare (
Haze 1%), Hard coating (3H)
Brightness 400 cd/m2 (Typ.), Contrast Ratio 5000:1
(Typ.), Display Colors 1.07B (8-bit + Hi-FRC), Response
Time 6.5 (Typ.)(G to G), Viewing Angle 88/88/88/88
(Typ.)(CR≥20) (L/R/U/D), Frequency 120Hz [[Panelook
copyright, copy is strictly prohibited] 120Hz (60HZ Input) :
Embedded MEMC Circuit 120Hz+120Hz : 120Hz
Panel+120Hz Backlight 240Hz (60HZ Input) : Embedded
MEMC Circuit], Lamp Type WLED [8S6P: 8 Serial, 6
Parallel], Signal Interface V-by-One 16 lane, Input Voltage
12.0 V (Typ.), Accessories : Wheel
IK
Information for Various
Scheme, Hospital
Facility etc. As per
NABH & MCi
Requirement
11 Floor Directory
Design, Composition, Supply & Installation of Changeable
Doctor's Name Plate
1st Layer : 3mm ACP sheet
2nd Layer : Pieces of 3mm Acrylic Sheet with vinyl print (
Doctor's Name )
3rd Layer : Router cut 3mm ACP sheet 4 th
Layer : 5mm Transparent acrylic sheet entire
signage will be fix on wall using SS studs
FD
OPD scheduled, day
scheduled, Visiting
National & International
Faculty As per NABH &
MCi Requirement
12
LED/ Non lit
Signage
Design, Composition, Supply & Installation of 10 mm
Acrylic Laser cut Letter Pasting on 4 mm ACP sheet box,
Acrylic laser cut letters Polyurethane Coating (PU Coated,
or Vinyl Pasted) in colour specified with Internally lit LED,
sign to be fixed on wall as per approved by the Institute.
LN1
Various Cafeteria,
Children's Play Area,
Gym
Design, Composition, Supply & Installation of 10 mm
Acrylic Laser cut Letters Pasting on 4 mm ACP Router cut
sheet, Acrylic laser cut letters Polyurethane Coating (PU
Coated) in colour specified to be fixed with concealed
stainless steel bolts.
LN2
13 Snap fit Frame
Design, Composition, Supply & Installation of Snap fit
frames, made of aluminium extruded profiles duly anodized
also provided with digitally printed vinyl pasted on 1mm
acrylic sheet.
SFF
Auditorium, promotion
of Staff, Various Event,
Lectures’ Room, CME,
Notice Boards, etc. As
per NABH & MCi
Requirement
14 Exit Sign
Design, Composition, Supply & Installation of Led
emergency light
Material: Aluminium box+PMMA board
Size: 360*200mm
Features: Overcharge protection
Light source: 3W led lights
Light color: White led
Voltage: AC90-260V 50/60Hz, AC110V~60Hz,
AC220V~50Hz
Battery:Ni-Cd1.2V
Duration time: 90Mins or 3Hours
Charging time: 24hour
Automatically Power switch
Finish: Double-side side printing
ES
Auditorium, Parking
Area, Emergency Exit
UNMICRC expansion project Phase – II: Design, supply & installation of Signages Vol-IV- Tech. Specifications
Tender No. HITES/IDN/UNM- AHD / Sign/2018-19 Page 12
15 Sandwich Display
Signage
Design, Composition, Supply & Installation of Digitally
printed vinyl with lamination on HP latex machine
sandwiched between 5mm Acrylic sheet & 3mm Acrylic
sheet with design Printed on 3M 1220 series, Sign to be
fixed on wall with stainless steel projected 25mm studs as
per approved by the Institute.
SDS
Waiting Area,
Auditorium, Institute
Vision Mission,
Fire Safety Guideline,
Map etc.
As per NABH & MCi
Requirement
16 Token Display
Design, Composition, Supply & Installation of display box of
size 12 inch. x 6 inch
Character height will be 4inch, Multi Counter Type LED
base 4-digit token Display with facility to display counter
number, keypads, transmission cables, printed paper token
issuing unit, necessary software. Display to be fixed on
Wall to be fixed with SS Screw. Hanging Display also
included with chain.
TD
OPD Waiting
17 Moving Message
Display
Design, Composition, Supply & Installation of display box of
size 48 inch. X 12 inch
Remote Operation Facility Size : Approx 9 Inch. font size
Single colour Bright LED based Moving Message Display,
multilingual type, with Aluminium frame, wall
mounted/hanging facility, auto message display schedule
facility, clock/date display, with GSM Modem unit to enable
changing of messages from remote location. Display to be
fixed on Wall to be fixed with SS Screw. Hanging Display
also included with chain.
MMD
Both Building Entry
(1) Design, Composition, Supply & Installation of Frosted
Film : 3M™ CRYSTAL Glass Finishes 7725SE-324
Frosted CRYSTAL
FG1
(2) Design, Composition, Supply & Installation of Frosted
Film with Latex Printing/plotter cutting : 3M™ CRYSTAL
Glass Finishes 7725SE-324 Frosted CRYSTAL
FG2
18 Film on Glass
Various glass surfaces,
Push & Pull for Door (3) Supply and installation of Sun Control Film : 1.22 mm
thick Garware Black Film FG3
(4) Design, Composition, Supply & Installation of One way
vison Film with Latex Printing 330 gsm FG4
(5) Design, Composition, Supply & Installation of 3M Vinyl
Printing with Lamination
FG5
19
Flex & Vinyl
Printing
(1) Design, Composition, Supply & Installation of Flex
Banner printing (4Pass) with Rivet FP1
Indoor wall Mount
(2) Design, Composition, Supply & Installation of Flex
Banner printing (4Pass) with mounted on 1 Inch MS Pipe
Frame.
FP2
(3) 3 MM thick foam sheet with digitally printed 3M vinyl
with lamination on HP Latex Printer pasted and fixing with
SS Mirer screw/ Double sided tap.
FP3
B EXTERNAL SI GNAGES
UNMICRC expansion project Phase – II: Design, supply & installation of Signages Vol-IV- Tech. Specifications
Tender No. HITES/IDN/UNM- AHD / Sign/2018-19 Page 13
20
STAINLESS
Steel 3D
LETTERS :
Design, Composition, Supply & Installation of building
facade LOGO &"HOSPITAL NAME" for building facade,
signage letters of Stainless Steel 304 graded 18swg
laser sheet cut fabricated letters for text: as per
requirement & design, with 25mm lipping in 22swg
Stainless steel sheet 304, Polyurethane Coating (PU
Coated) in color specified, with concealed lighting behind
the letters in White LED Modules of Samsung / Philips
make in 0.72 watts, with requisite Power supply of Meanwel
branded with 2 years warranty, along with
Breaker and Legrand / L&T timer, to be mounted on
Syntax junction box to be fixed near sign location;
Power should be provided near sign locations; all wiring
has to be concealed and should not be visible, all
fixtures should be in Stainless Steel / aluminium,
concealed behind the letters.
SSL
Main Building name,
block Name,
Auditorium etc As per
NABH & MCi
Requirement
21
Totem SIGNAGE
:
(1)Design, Composition, Supply & Installation of structural
steel frame made out of medium duty 50mm square pipe
section, red oxide primer with two coat of synthetic enamel
painting, providing & fixing 3/4mm thick polycarbonate
sheet with 40% translucency, with graphics on single side
digitally printed on UV cured 3M media or 3M external
grade vinyl; totems to be internally illuminated with LED
power module double side, high output 7100 k, numbers as
per design, 140 degree, at the distance as recommended
by General Electric , model "ECLAT"or equivalent.
TS1
At the entrances of the
block
(2) Design, Composition, Supply & Installation of structural
steel frame made out of medium duty 50mm square pipe
section, red oxide primer with two coat of synthetic enamel
painting, providing & fixing 3/4mm thick polycarbonate
sheet with 40% translucency, with graphics on both side
digitally printed on UV cured 3M media or 3M external
grade vinyl; totems to be internally illuminated with LED
power module double side, high output 7100 k, numbers as
per design, 140 degree, at the distance as recommended
by General Electric , model "ECLAT"or equivalent.
TS2
22
External Direction
Signage: (1) Design, Composition, Supply & Installation of single
sided non-lit External Multi Directional Signage structural
steel frame made out of medium duty 50mm square pipe
section, gusset plate 6mm thick and two base plates of size
400X400X10mm, red oxide primer with two coat of
synthetic enamel painting, fixing of base plate to foundation
through anchor bolt , providing & fixing ACP Sheet 3mm in
cladding, 3M (3630/3650 series) Vinyl of background with
High Intensity Prismatic (HIP) reflective sheet, self-
adhesive graphics with 3M Scotchcal and mounting with
3M approved tensioning system etc. complete as per
drawing and specification.
EDS1
On side Vehicular,
Roads Pedestrian Path
way As per NABH &
MCi Requirement (2) Design, Composition, Supply & Installation of double
sided non-lit External Multi Directional Signage with pole of
72x72x2.5mm, structural steel frame made out of medium
duty, 50mm & 25mm square pipe section and base plate
300X300X10mm, red oxide primer with two coat of smoke
grey shade epoxy painting, fixing of base plate to
foundation through anchor bolt, providing & fixing ACP
Sheet 3mm in cladding, 3M Vinyl of background with High
Intensity Prismatic (HIP) reflective sheet, self-adhesive
graphics with 3M Scotchcal and mounting with 3M double
sided VHB Tape etc. complete as per drawing and
specification.
EDS2
UNMICRC expansion project Phase – II: Design, supply & installation of Signages Vol-IV- Tech. Specifications
Tender No. HITES/IDN/UNM- AHD / Sign/2018-19 Page 14
23
Outdoor
Informative
Signage
(1) Design, Composition, Supply & Installation of Digitally
Printed High Intensity Prismatic (HIP) reflective sheet
Pasted on 3mm ACP cladded 1 Inch MS Pipe frame fixed
on wall or hanging with SS chain
OIS1
Various Parking Area
(2) Design, Composition, Supply & Installation of Digitally
Printed High Intensity Prismatic (HIP) reflective sheet
Pasted both side on 3mm ACP cladded 1 Inch MS Pipe
box fixed on wall or hanging with SS chain
OIS2
(3)Design, Composition, Supply & Installation of Digitally
Printed High Intensity Prismatic (HIP) reflective sheet
Pasted both side on 3mm ACP cladded 1 Inch MS Pipe
box fixed on 10ft tall 50mmx50mmx2mm MS Pole duly
painted with base plate of 250mmx250mmx8mm
OIS3
24 General LED
Sign
Design, Composition, Supply & Installation of ACP
Cladded Box, 1"X1" MS pipe of 1.2mm Frame with Rust
Treatment Anti-rust agent applicable. Double frame, 4"
Depth, 3mm Pvdf coating, ACP for Front Facia & Sides.
Every 4ft one vertical joint will come Application of Silicon
Sealant on all joint to stop water seepage, Aluminium
channel letter with inside LED light
Acp Brand : Aludecor/Flexi bond Code
Back Side of Board : 3mm Pvdf coating ACP, ACP
Brand : Aludecor/Flexibond Code
Letters depth : 75mm (Approx)
Letters Base: 3mm pu coating acp for LED fixing Letters
Side:. 0.8 mm aluminium with machine bending and
colour coating
Letters Top: 040 3MM acrylic letters
Branding: 3M 3630/3650 vinyl
Acrylic Brand: Atari/Marca/or Equivalent
3 Chip Led Module: 1.2 Wt 8000 k
Led Brand : LT/GOQ/HI SIGN with Samsung chip
Water Proof, IP 67/ 68 GRADE, 3 Years Warranty, With
Overvoltage and Short Circuit Protection
Back side of board 8mm metal clamp
GLS
Over Wall on Entrance
porch of Hospital
25 Terrace sign
50mm x 50mm x 6mm MS Angel structure fix at terrace, 1”
MS pipe platform for fixing letters and for maintenance. Box
type Aluminium channel letters with LED (Cost calculate
per sq. ft. for approx size 40ft x 15 ft) Letters depth : 75mm
(Approx.) Letters Base: 3mm pu coating acp for LED fixing,
Letters Side:. 0.8 mm aluminium with machine bending and
white coating
Letters Top: 040 3MM acrylic letters, Branding: 3M
3630/3650 vinyl, Acrylic Brand: Atari/Marca/or Equivelent,
3 Chip Led Module: 1.2 Wt 8000 k 3 years warranty
Led Brand : LT/GOQ/HI SIGN with Samsung chip, Water
Proof, IP 67/ 68 GRADE, 3 Years Warranty, With
Overvoltage and Short Circuit Protection
TS
Terrace sign
26 Emergency
Signage
Supply and installation of 3mm Red Acrylic letters with side
wall PU coated (Red) aluminium channel, Reverse ACP
channel for LED fixing Samsung LED chip and water proof
power supply on back side.
ES
Emergency As per
NABH & MCi
Requirement
UNMICRC expansion project Phase – II: Design, supply & installation of Signages Vol-IV- Tech. Specifications
Tender No. HITES/IDN/UNM- AHD / Sign/2018-19 Page 15
(1) Supply and installation of double sided back-lit Signage
including providing & fixing structural steel frame made out
of medium duty 25mm square pipe section, red oxide
primer with two coat of synthetic enamel painting, providing
& fixing 26 gauge powder coted MS Sheet top, bottom &
sides, echo solvent printing on 3M Lumina backlit flex, T5
Tube light 40W with all fittings but excluding electric cable &
conduit provision etc. complete as per drawing and
specification.
GSB1
27 Glow sign Board
( Outdoor )
Public Utility, Bank,
(2) Supply and installation of Single sided back-lit Signage
including providing & fixing structural steel frame made out
of medium duty 25mm square pipe section, red oxide
primer with two coat of synthetic enamel painting, providing
& fixing 26 gauge powder coted MS Sheet top, bottom &
sides, echo solvant printing on 3M Lumina backlit flex, T5
Tube light 40W with all fittings but excluding electric cable &
conduit provision etc. complete as per drawing and
specification.
GSB2
NOTE:
1.All Materials Specification and Design to be as per UNMICRC/HITES. 2. Sample / mock up of each item shall be produced for approval before commencement of production.
END OF VOLUME – IV (LAST PAGE)