SUPERTECH ENGINEERS

INDUSTRIAL AUTOMATION SERVICES & SOLUTIONS

PRODUCT LIST

2010-2011

AUTOMATION & ELECTRICAL PRODUCTS

ENERGY MANAGMENT SYSTEM NANO MODULE (S.TECH-EMS-NANO)

ENERGY MANAGMENT SYSTEM MICRO MODULE (S.TECH-EMS-MICRO)

PLC BASED DEMAND CONTROL CUM ENERGY MONITORING SYSTEM MODULE (S.TECH- MD/EMS)

PLC BASED DEMAND CONTROL MODULE SYSTEM (S.TECH-DMD)

PF CORRECTION FOR H.T. (S.TECH-PFCHT-11/33)

PF CORRECTION FOR L.T.(S.TECH-PFCLT)

HARMONIC CORRECTION FOR H.T. (S.TECH-HCHT)

PLC BASED STP/WTP/ETP AUTOMATION MODULE SYSTEM

PLC BASED COOLING/CHILLER PLANT AUTOMATION MODULE SYSTEM

PROCESS AUTOMATION(S.TECH-PAW-SCADA/HMI)

FEATURES__ :

“S.TECH-EMS-NANO” system designed for Monitoring up to 200 Tags. This system is designed for maximum of 20 numbers of Devices. In this system one can obtain the Total 200 numbers of Electrical Parameters on SCADA

inclusive of all the feeders. Basic Parameters available to Monitor on SCADA are : KW,KVA,KVAR,PF,KWH,KVAH,

Voltages of R/Y/B-Phase, Current of R/Y/B-Phase, HZ, Accumulated Demand, etc. Harmonic Analysis Screen on SCADA available for Mains feeder. Report in Excel sheet Form(Database storage for 1 year of reports is available). Historical/Real Time trends Available. Alarms Status available. Telephonic/Onsite Warranty for one year. After One year warranty of the system AMC service for the same is available.

SMART ENERGY METERS

RS-485 NETWORK

SCADA COMPUTER

MONITORING OF UP TO 200 TAGS

ENERGY MANAGMENT SYSTEM NANO MODULE (S.TECH-EMS-NANO)

FEATURES__ :

“S.TECH-EMS-MICRO” system designed for Monitoring more than 200 Tags. This system is designed for more than of 20 numbers of Devices. In this system one can obtain the all Electrical Parameters on SCADA for all the feeders. Basic Parameters available to Monitor on SCADA are : KW,KVA,KVAR,PF,KWH,KVAH,

Voltages of R/Y/B-Phase, Current of R/Y/B-Phase, HZ, Accumulated Demand, etc. Harmonic Analysis Screen on SCADA available for all the feeders. Report in Excel sheet Form(Database storage for more than 1 year of reports is available). Historical/Real Time trends Available. Alarms Status available. Operator Station for SCADA(Energy Monitoring System) can be at any distance from

Feeders. Web Based (i.e. via Internet)/Telephonic/Onsite Warranty for one year. After One year warranty of the system AMC service for the same is available.

SMART ENERGY METERS

REPEATER

REPEATER

AREA-1

AREA-2

AREA-3

SCADA

HARMONIC ANALYSIS

RS-485 NETWORK

ENERGY MANAGMENT SYSTEM MICRO MODULE (S.TECH-EMS-MICRO)

FEATURES__ :

“S.TECH-MD/EMS” system designed for controlling The Contract Demand of the Plant. PLC based system. Smart Energy Meters Installed on feeders are RTC based RTC of PLC & Smart Meter makes this system Precise to match the Demand Timing of

Electricity Board along with Plant’s current Demand. Logic of PLC for controlling can be designed or customize as per client’s request. Availability of Indications For Spare Load/Normal Load/and High Load. Smart Tripping system for the non-critical load to control the Demand. Availability of more than 3 tripping. Load management system as per Under Voltage/Over Voltage/ Over current for the feeders. Energy Monitoring System (SCADA) available. Basic Parameters available to Monitor on SCADA are : KW,KVA,KVAR,PF,KWH,KVAH,

Voltages of R/Y/B-Phase, Current of R/Y/B-Phase, HZ, Accumulated Demand, etc. Harmonic Analysis Screen on SCADA available for Mains feeder. Report in Excel sheet Form(Database storage for 1 year of reports is available). Historical/Real Time trends Available. Alarms Status available. Module is customizable in terms of I/O. Telephonic/Onsite Warranty for one year. After One year warranty of the system AMC service for the same is available.

RS-485 NETWORK

OUTPUTS

SCADA(ENERGY MONITORING SYSTEM)

PLC

RELAY CARD

SMART ENERGY METER

REPEATER

feeders

PLC BASED DEMAND CONTROL CUM ENERGY MONITORING SYSTEM MODULE (S.TECH-MD/EMS)

FEATURES__ :

“S.TECH-DMD” system designed for controlling The Contract Demand of the Plant. PLC based system. Smart Energy Meters Installed on feeders are RTC based RTC of PLC & Smart Meter makes this system Precise to match the Demand Timing of

Electricity Board along with Plant’s current Demand. Logic of PLC for controlling can be designed or customize as per client’s request. Availability of Indications For Spare Load/Normal Load/and High Load. Smart Tripping system for the non-critical load to control the Demand. Availability of more than 3 tripping. Load management system as per Under Voltage/Over Voltage/ Over current for the feeders. Module is customizable in terms of I/O. Telephonic/Onsite Warranty for one year. After One year warranty of the system AMC service for the same is available.

PLC BASED DEMAND CONTROL MODULE SYSTEM (S.TECH-DMD)

PLC

OUTPUTS

SMART ENERGY METER

REPEATER

RELAY CARD

RS-485 NETWORK

feeders

FEATURES__ :

System designed & Customizable as per client’s requirement for the automation of STP/WTP/ETP.

Advance PLC based system. On Panel HMI Display is available for Local operation of Panel.(HMI-Display used as per

client’s request) Real Time Clock (RTC) based system for the precise operation based on Clock timings and

Shifts. Different modes of Operation i.e. Manual/Semi-Auto/Fully-Auto modes selection from HMI

Display or from SCADA available. SCADA embedded system for easy & Precise Monitoring & Operation of Plant from Remote

area. Reports Availability from SCADA to obtain shutdown timings & Different modes of

operations timings say to obtain the timing and running hours of Pumps, compressors, Blowers in Excel sheet form from SCADA.

Running Hours Recording (Report) availability for different modes say Service Mode, Backwash Mode, Rinse Mode, Softener Mode’s etc.

OPEN/CLOSE Status of different number of valves, Running status of Pumps/Compressors/Blowers.

Operator can feed the required Running Hour Timings as Set Point from SCADA for the different numbers of modes.

Logic of PLC for controlling can be designed or customize as per client’s request. Smart Tripping for the electrical safety of Pumps/Compressors/Blowers. Module is customizable in terms of I/O. Telephonic/Onsite Warranty for one year. After One year warranty of the system AMC service for the same is available.

PLC BASED STP/WTP/ETP AUTOMATION MODULE SYSTEM

FEATURES__ :

System designed & Customizable as per client’s requirement for the automation of chillers/cooling tower plants.

Advance PLC based system. On Panel HMI Display is available for Local operation of Panel.(HMI-Display used as per

client’s request) Real Time Clock (RTC) based system for the precise operation based on Clock timings and

Shifts. Different modes of Operation i.e. Manual/Semi-Auto/Fully-Auto modes selection from HMI

Display or from SCADA available. SCADA embedded system for easy & Precise Monitoring & Operation of Plant from Remote

area. Reports Availability from SCADA to obtain shutdown timings & Different modes of

operations timings say to obtain the timing and running hours of Pumps, compressors in Excel sheet form from SCADA.

Reports Availability for the temperature, Pressure of the chiller Plant. Running Hours Recording (Report) availability. OPEN/CLOSE Status of different number of valves, Running status of Pumps/Compressors.. Operator can feed the required Running Hour Timings as Set Point from SCADA for the

different numbers of modes. Historical/Real Time trends Availability. Logic of PLC for controlling can be designed or customize as per client’s request. Smart Tripping for the electrical safety of Pumps/Compressors. Module is customizable in terms of I/O. Telephonic/Onsite Warranty for one year. After One year warranty of the system AMC service for the same is available.

PLC BASED COOLING/CHILLER PLANT AUTOMATION MODULE SYSTEM

FEATURES__ :

We designs Automated Systems for different sectors such as for Plastic Extrudors/Chiller Plants/Storm water treatment Plant(STP)/Waste Water Treatment Plant(WTP)/Effluent Water Treatment Plant(ETP)/Demand Controlling/Packaging Machines/Paper Mills/Steel Plants.

Besides Process Automation we carries out Sub-Station Automation for Controlling VCB on the basis of PF/Demand/Harmonics/Over current/Over Voltage/Under Voltage etc.

We Uses the Different Makes Of PLCs/SCADA/HMI etc. Our Process Automation system is fully customizable. We looks after the AC Drives Based Automation. Our Automation solution is cost effective with a strong technical troubleshooting

background Real Time Clock (RTC) based system for the precise operation based on Clock timings and

Shifts. Different modes of Operation i.e. Manual/Semi-Auto/Fully-Auto modes selection from HMI

Display or from SCADA available. SCADA embedded system for easy & Precise Monitoring & Operation of Plant from Remote

area. Reports Availability for the required parameters by client in Excel Sheet Form. Historical/Real Time trends Availability. Operator can feed the required Set Point from SCADA for the different numbers of required

operations. Logic of PLC for controlling can be designed or customize as per client’s request. Smart Tripping for the electrical safety. Module is customizable in terms of I/O. Telephonic/Onsite Warranty for one year. After One year warranty of the system AMC service for the same is available.

PROCESS AUTOMATION(S.TECH-PAW-SCADA/HMI)

FEATURES__ :

WE CARRIES OUT DETAILED STUDY IN PLANTS IN ORDER TO TRACE OUT THE BAD FACTORS OF POWER QUALITY SUCH AS Total Harmonic Destortion(T.H.D.),and INDIVIDUAL HARMONICS, we uses world class approved instrument of FLUKE & QUALISTAR.

After a detailed study of Harmonics that which number of harmonic is present and in what amount for each Ampas well as THD we prepares the load profile and of the plant to provide the best solution to remove the bad Power Quality factors.

On the basis of the profile what we obtains after the detailed study of Load Profile of Plant we provides best Solution to improve the Power Quality alongwith PF improvement as well, by installing the appropriate kind of capacitors for both HT as well as LT sections we have best team to design & install the best structure of capacitor’s configuration.

PF CORRECTION FOR H.T. (S.TECH-PFCHT-11/33)

PF CORRECTION FOR L.T.(S.TECH-PFCLT)

HARMONIC CORRECTION FOR H.T. (S.TECH-HCHT)

NOTE : FOR A DETAILED VIEW OF OUR

ENERGY MONITORING SYSTEM

(SCADA )

KINDLY VIEW THE ATTACHED SLIDE SHOW FILE