supioneer metal materials co., ltd...loads and impacts of vehicles. besides, it is required to be...

Supioneer Metal

Materials Co., Ltd The most comprehensive types of steel

supplier

http://firsteelplate.com/

http://www.firsteelplate.com Email: [email protected]

1、ABOUT SDJS

1.1 SDJS Introduction

Supioneer Metal Materials Co., Ltd is the only steel supplier in China who

provides the most comprehensive types of steel. Our steel plate products

include black steel plates, stainless steel plates, galvanized steel plates,

checkered steel plates, steel coils and so on. Among all steel plate products of

our company, extra wide and thick steel plates, Cr-Mo steel plates, low

temperature pressure vessel steel plates, and high strength steel plates are

the four featured products. Supioneer Metal Materials Co., Ltd has established

long-term strategic cooperative relationships with the producers of the

products mentioned above. Powerful product sources and marketing capacity

enable us to take the leading place in domestic steel trade. Now the company

has shifted its focus to the exportation of steel materials, and our aim is to

become the largest and strongest steel materials supplier in China’s

international trade.

We can provide Extra-Wide and Extra-thick Steel Plate with max thickness of

700mm, max piece weight of 50t, which makes us the only supplier of China

who can provide steel plate of such specification. Anti-Hydrogen Cr-Mo Steel

Plate with max thickness of 198mm and max piece weight of 38t is also

available. Our Low Temperature Pressure Vessel Steel Plate is weldable

under the temperature condition of -196℃. Representative steel grades of low

temperature vessel steel plate are 9Ni (SA553)，08NiDR (SA203E), all with

better properties compared to international quality standards. We can also

provide High Strength Steel Plate with excellent quality.

Product standard grades cover main international standards for steel materials,

such as ASTM, ASME, API, JIS, DIN, BS, etc., and these products are sold

across over 100 countries and areas in Middle-east, Southeast Asia, Africa,

South America, etc. We now have four large-scale warehouses for abundant

product supply: one is located in Shanghai and has a stock inventory of about

7, 000 tons; the warehouse in Qingdao has a stock inventory of about 6, 500

tons; and each warehouse in Tianjin and Zhengzhou has about 3, 000 tons of

stock inventory. Based on the sound foundation of steel resources, Supioneer

Metal Materials Co., Ltd also adopts the "one-stop" service, allowing

customers to enjoy the lowest cost for steel cutting, welding, drilling,

galvanizing, and the best quality service at the same time.


1.2 Why Choose SDJS

Decades of producing and trading experience

ensuring you to touch with our most

competitive products

Penetrating insight of every tiny market

fluctuation for hundreds of products in hand

Price advantage for designated premium steel

benefited from strategic cooperative

partnership with famous steel plants in China

A processing factory of our own, advanced

manufacturing technology, and our aime of

achieving one stop processing service

http://firsteelplate.com/List/10.shtml


1.3 One-stop Service

Selling servicess

what we caAll you need to do is give us the drawings of wanted products; the rest will be nicely done by us. This is what we call “one-stop” service. p” service.

Selling concepts

What we sell has been and will always be customer satisfaction towards our products. We are willing to meet all requirements of our friends; we will not be happy unless our friends

Selling products

We can not only provide any kind of steel plate you need, but also cutting and processing service if necessary.


2、Steel Plate Series

2.1 Stainless steel plate

2.2Bridge building steel plate

2.3 Cr-Mo steel plate

2.4 High strength steel plate

2.5 Mold steel plate

2.6 Alloy structural steel plate

2.7 SA203E /SA353/%9Ni low temperture plate

2.8 Galvanized /PPGI steel coil/sheet

2.9 Oil pipeline steel plate/coil

2.10 Nuclear power steel plate

2.11 Boiler and pressure vessel steel plate

2.12 Shipbuilding and ocean platform steel

2.13 Low-alloy high-strength steel plate

2.14 Wear-resistant steel plate

2.15 Carbon structural steel plate

2.16 Corrosion-resistant steel plate


2.1 Steel Plate Series—Stainless steel plate

ASTM:201,202,301,304,304L,310S,316,316L,316LN,316Ti,321,416,430,410,420,431

JIS:SUS301,304,304L,316,316L,346LN,316Ti,430,410S,420J1

UNS:S30400,S30403,S31600,S31603,S32100,S43000,S41000,S42000,S43100,S31254

Stainless steel has the properties of smooth surface, high plasticity/tenacity/mechanical

strength, and resistance to acid/alkali gas/liquid or other corrosive substances. It is a kind

of alloy steel that does not easily get rusted but not absolutely incorruptible.

Generally speaking, stainless steel plate is the overall name for stainless steel plates and

acid-resistant steel plates. The former refers to steel plate resistant to corrosion caused

by atmosphere, steam, water and other media; while the latter refers to steel plate resista

nt to corrosion caused by acid, alkaline, salt and other corrosive chemical media.

Stainless steel is widely used in paper heat exchanger for pulp & paper making equipme

nts, food industry equipments, medical & chemical industry, dyeing machinery, pipe, exte

rnal materials for coastal buildings, construction decoration,etc.

http://www.firsteelplate.com/Content/458.shtmlhttp://www.firsteelplate.com/Content/459.shtmlhttp://firsteelplate.com/Content/402.shtmlhttp://firsteelplate.com/Content/199.shtmlhttp://firsteelplate.com/Content/403.shtmlhttp://www.firsteelplate.com/Content/460.shtmlhttp://firsteelplate.com/Content/404.shtmlhttp://www.firsteelplate.com/Content/461.shtmlhttp://www.firsteelplate.com/Content/462.shtmlhttp://www.firsteelplate.com/Content/463.shtmlhttp://firsteelplate.com/Content/405.shtmlhttp://www.firsteelplate.com/Content/465.shtmlhttp://www.firsteelplate.com/Content/467.shtmlhttp://www.firsteelplate.com/Content/464.shtmlhttp://www.firsteelplate.com/Content/466.shtmlhttp://www.firsteelplate.com/Content/468.shtmlhttp://firsteelplate.com/Content/402.shtmlhttp://www.firsteelplate.cn/Content/199.shtml#.U6KdUrcwDGIhttp://firsteelplate.com/Content/403.shtmlhttp://firsteelplate.com/Content/404.shtmlhttp://www.firsteelplate.com/Content/245.shtml


2.2 Steel Plate Series— Bridge building steel plate

ASTM A709MGr36,A709MGr50,A709MGr50W,A709MGr70W,HPS50W,HPS70W

ASTM A514/A514M-00:GrA,GrB,GrE,GrF,GrH,GrP,GrQ,GrS

ASTM A709/A709M-03:A709－50F－2,HPS485W

ASTM A572/A572M-97: A572Gr42,A572Gr50,A572Gr60

DIN 17102-81: StE355

DIN 17100-80: St37-2,St52-3

BS4360-1986:43B,50D,55E

BS EN 10025-6:2004: S550QL,S620QL1,S690QL1,S890QL

EN10025:1990+A1:1993:S235JR,S355K2G4

EN10113-2:1993: S460N,S275NL,S355N,S420N,

EN10113-3:1993:S275M,S355ML,S420M,S460ML

Bridge building steel plate is especially used in construction of railway or highway

bidges. Bridge building steel should possess high strength and toughness to bear the

loads and impacts of vehicles. Besides, it is required to be wear-resistant,

atmospheric corrosion resistant, and to have high quality surface and proper

toughness under low temperature. Bridge building steel is usually made from basic

open hearth killed steel. Bolt welded bridge building steel is even required to have

proper weldability and low notch sensitivity.

Specification: thickness: 6-50MM, width:1-2.4M, length:2-16MOur main grades of

bridge building steel are as below: A709M (Gr36, 50, 50W, 70W, HPS50W,

HPS70W)

http://firsteelplate.com/Content/313.shtml#.U60tm5SSy4khttp://firsteelplate.com/Content/313.shtmlhttp://firsteelplate.com/Content/317.shtmlhttp://firsteelplate.com/Content/317.shtmlhttp://firsteelplate.com/Content/319.shtmlhttp://firsteelplate.com/Content/319.shtmlhttp://www.firsteelplate.cn/Content/335.shtml#.U60u7JSSy4khttp://www.firsteelplate.cn/Content/177.shtml#.U60u0ZSSy4khttp://www.firsteelplate.cn/Content/179.shtml#.U60vEpSSy4khttp://firsteelplate.com/Content/163.shtmlhttp://firsteelplate.com/Content/165.shtmlhttp://firsteelplate.com/Content/324.shtmlhttp://firsteelplate.com/Content/315.shtmlhttp://firsteelplate.com/Content/322.shtmlhttp://firsteelplate.com/Content/318.shtmlhttp://firsteelplate.com/Content/313.shtmlhttp://firsteelplate.com/Content/316.shtmlhttp://firsteelplate.com/Content/317.shtmlhttp://firsteelplate.com/Content/317.shtmlhttp://firsteelplate.com/Content/317.shtmlhttp://firsteelplate.com/Content/317.shtml


2.3 Steel Plate Series—Cr-Mo steel plate

Mainmterial:SA387Gr11,SA387Gr12,SA387Gr22,SA302,2.25Cr-1Mo,25CrMo4,34CrMo

4,42CrMo4

ASTM/ASME/AISI/API：SA387Gr11C12，2.25Cr-1Mo/SA387Gr22CL2，4130，4140/4142

JIS:SCM420/SCM22,SCM430/SCM2,SCM4

DIN:25CrMo4(1.7218),34CrMo4(1.7220),42CrMo4(1.7225)

EN10083-1:25CrMo4,34CrMo4,42CrMo4

The series of Cr-Mo steel plate:

SA387Gr11 series: 14Cr1MoR, SA387Gr11CL1, SA387Gr11CL1/2, 1.25Cr-0.5Mo,

1.25Cr-0.5Mo-Si

SA387Gr12 series: 15CrMoR, SA387Gr12CL2, 1Cr-0.5Mo

SA387Gr22 series: 12Cr2Mo1R, SA387Gr22C12, 2.25Cr-1Mo

2.25Cr-1Mo-0.3V series: 12Cr2Mo1VR, 2.25Cr-1Mo-0.3V

SA302 series

http://firsteelplate.com/Content/280.shtmlhttp://firsteelplate.com/Content/321.shtmlhttp://firsteelplate.com/Content/360.shtmlhttp://firsteelplate.com/Content/289.shtmlhttp://firsteelplate.com/Content/320.shtmlhttp://firsteelplate.com/Content/320.shtmlhttp://firsteelplate.com/Content/421.shtmlhttp://firsteelplate.com/Content/320.shtmlhttp://www.firsteelplate.cn/Content/223.shtml#.U6jy8JSSy4khttp://www.firsteelplate.cn/Content/176.shtml#.U6jzZZSSy4k


2.4 Steel Plate Series— High strength steel plate

ASTM/ASME/AISI/AP:Type8 Grade 80[550],Type8 Grade 80[550],100[690]Type Q

EN10025:S460QL1,S550Q,S550QL,S690Q,S690QL,S690QL1,S890Q,S960Q

According to the ULSAB (Ultra Light Steel Auto Body) of International Iron and Steel

Institution, steel with yield strenth between 210～550MPa is high strengh steel (HSS),

while steel with yield strength higher than 550MPa is ultra high strength steeel (UHSS).

High strength steel also can be classified by strengthening mechanism into ordinary high

strength steel and AHSS (Advanced High Strength Steel).

Ordinary high strength steels include C-Mn steel, BH steel (baking-hardened), HSS-IF

steel (interstitial free), and HSLA steel (high strength low alloy). AHSS steel mainly

includes DP steel, TRIP steel, M steel, CP steel, HF steel, and TWIP steel. AHSS steel's

yield strength is between 500-1500MPa, with good property of energy absorption. Thus,

AHSS steel plays an important role in automobile lightening and safety performance

improving of automobiles. AHSS steel is widely applied in vehicle industry, mainly used for

making vehicle structure components, safety components, and reinforcement

components like A-B-C column, doorsill, front-bank bumper, door buffer beam, slide rail of

chair, etc.

http://firsteelplate.com/Content/388.shtmlhttp://firsteelplate.com/Content/275.shtmlhttp://firsteelplate.com/Content/275.shtmlhttp://firsteelplate.com/Content/391.shtmlhttp://firsteelplate.com/Content/391.shtmlhttp://firsteelplate.com/Content/391.shtmlhttp://firsteelplate.com/Content/349.shtmlhttp://firsteelplate.com/Content/350.shtmlhttp://firsteelplate.com/Content/350.shtml


2.5 Steel Plate Series—Mold steel plate

ASTM: P20,P21,420,1053, 1551, 1561, 1566, AISI-P20/GS2311

UNS: G10530, G15510, G15610, G15660

JIS: P20 + Ni,S45C-S55C,SWR-H52B, S53C, G15610, S58C, S45C-S55C, P80

DIN: 2C50, 2C60, CK60, 65Mn4, 1.233

Mold steel refers to steel used for forging, punching, cutting, casting, etc. Mold steel can

be divided into three categories: cold die steel, hot die steel and plastic molding mold

steel.

http://firsteelplate.com/Content/348.shtmlhttp://firsteelplate.com/Content/44.shtmlhttp://firsteelplate.com/Content/353.shtml


2.6 Steel Plate Series— Alloy structural steel plate

Featured steel grade: SAE4130, 25CrMo4, 34CrMo4, 42CrMo4, 4118, 4135

ASTM/ASME/AISI/API:1340,1052,5140,4135,4140

JIS:SMn420,SMn21,SMn433,SMn1,SMn438 ,SCr445（ SCr5 ）

DIN:15Mo3(1.5415) ,42CrMo4(1.7225) ,15CrMo5(1.7262) ,28Mn6(1.5065),30Mn5(1.506

6)

Alloy structural steel is so called because this kind of steel contains certain other alloy

elements, and it is applied for fabrication of machine parts and construction components.

Alloy structural steel has proper hardenability. The microstructure becomes fine pearlitic,

sorbite, bainite structure after proper steel heat treatment, thus having high tensile

strength and yield ratio (average value 0.85), high toughness and fatigue strength, with

lower ductile-brittle transition temperature, which makes is suitable for making machine

parts with large sectional diamension.

Alloy structural steel can be generally divided into quenched and tempered alloy

structural steel and surface hardened alloy structural steel. The former is suitable for

making shafts and connecting rods bearing large load; the latter is suitable for making

components with hard and wear-resisting surface and soft heart, such as gears and

shafts.

http://www.firsteelplate.cn/Content/285.shtml#.U6KnobcwDGIhttp://www.firsteelplate.cn/Content/290.shtml#.U60d25SSy4khttp://www.firsteelplate.cn/Content/330.shtml#.U60dqpSSy4khttp://firsteelplate.com/Content/288.shtmlhttp://firsteelplate.com/Content/330.shtmlhttp://firsteelplate.com/Content/360.shtmlhttp://firsteelplate.com/Content/157.shtmlhttp://firsteelplate.com/Content/424.shtml


2.7 Steel Plate Series— SA203E /SA353/%9Ni low temperture plate

ASTM:SA203E,SA353,SA516 Gr.60-(HIC),SA553-1,SA516 Gr.65-(HIC) ,SA516

Gr.70-(HIC)

JIS:SL9N520,SL9N590

EN 10028-3:X8Ni9+NT640,X8Ni9+QT680,X7Ni9+QT680

1. Introduction to SA203E steel plate:

SA203E steel is a very premium steel applied in fabrication of low temperature welding

pressure vessel. We promote this kind of steel at its most competitive price. Our SA203E

takes lead in its low temperature ductility property in iternationl quality level, with a max

thickness of 100mm.delivery status: normalizing, normalizing + tempering,size:

T*W*L=6-100*1500-3800*6000-18000mm,operation temperature: -100ºC--100ºC

2. Introduction to 9%Ni,SA553 steel:

ASME SA553 steel is designed for application under low temperature conditions. This

steel holds pretty good low temperature ductility property at -196℃ . Its yield strength

property, as well as ductility property, is better than Austenitic stainless steel

under the same low temperature circumstances. Besides, properties like

forming, weldability, and crack resistance are also good. SA353(9Ni) steel is

applied for fabrication of LNG/lilquid argon/liquid nitrogen containers.

3. Other advantageous products:

H2S anti-corrosion pressure vessel steel: SA516 Gr60(HIC), SA516

Gr65(HIC), SA516 Gr70(HIC)

http://firsteelplate.com/Content/279.shtmlhttp://www.firsteelplate.cn/Content/283.shtml#.U6Kl47cwDGIhttp://firsteelplate.com/Content/219.shtmlhttp://firsteelplate.com/Content/219.shtmlhttp://firsteelplate.com/Content/221.shtmlhttp://firsteelplate.com/Content/222.shtmlhttp://firsteelplate.com/Content/222.shtmlhttp://www.firsteelplate.cn/Content/279.shtml#.U6KlWbcwDGIhttp://www.firsteelplate.cn/Content/283.shtml#.U6Kl47cwDGIhttp://www.firsteelplate.cn/Content/219.shtml#.U5gBG3KSy4khttp://www.firsteelplate.cn/Content/221.shtml#.U5gA63KSy4khttp://www.firsteelplate.cn/Content/221.shtml#.U5gA63KSy4khttp://www.firsteelplate.cn/Content/222.shtml#.U5f_53KSy4k


2.8 Steel Plate Series— Galvanized /PPGI steel coil/sheet

JIS: SGCC, SPCC, SGHC, SGCC/DC51D+Z, SPCD

JIS:G3302,TSGC(GC),TSGC340(GC),TSGC400(GC),TSGC440(GC),TSGC490(GC),TS

GC570(GC),TSGCD1

JIS:G3141,TSPCC,TSPCD,TSPCE

EN 10327:TDX51D+Z(GC) ,TDX52D+Z ,TDX53D+Z ,TDX54D+Z

EN 10130:TDC01,TDC03,TDC04

EN 10326: TS220GD+Z(GC), TS250GD+Z(GC),TS280GD+Z(GC),TS320GD+Z(GC),TS3

50GD+Z(GC),TS550GD+Z(GC)

SAE:SAE1010,SAE1008,CPCD,CPCE,SGSS,SGCD,PPGI

Application:Roof, floor deck, trailer coach, household appliances, commercial and indus

trial buildings.

Color-coated sheet is also called color-coated steel plate, colored plate in steel industry.

Color coated steel plate is made from cold rolled steel plate and galvanized steel plate

by processing a series of treatment as surface pretreatment (degreasing, cleaning, and c

hemical conversion treatment), coating painting continuously (roller coating method), and the

n baking and cooling.

http://www.firsteelplate.cn/Content/33.shtml#.U46UeXKSy4khttp://www.firsteelplate.cn/Content/32.shtml#.U46TuXKSy4khttp://www.firsteelplate.cn/Content/31.shtml#.U6KnCrcwDGIhttp://www.firsteelplate.cn/Content/33.shtmlhttp://www.firsteelplate.com/Content/455.shtmlhttp://www.firsteelplate.com/Content/455.shtmlhttp://www.firsteelplate.com/Content/452.shtmlhttp://www.firsteelplate.com/Content/452.shtmlhttp://www.firsteelplate.com/Content/454.shtmlhttp://www.firsteelplate.com/Content/454.shtmlhttp://www.firsteelplate.com/Content/456.shtmlhttp://www.firsteelplate.com/Content/456.shtmlhttp://www.firsteelplate.com/Content/448.shtmlhttp://www.firsteelplate.com/Content/449.shtmlhttp://www.firsteelplate.com/Content/450.shtmlhttp://www.firsteelplate.com/Content/434.shtmlhttp://www.firsteelplate.com/Content/435.shtmlhttp://www.firsteelplate.com/Content/437.shtmlhttp://www.firsteelplate.com/Content/438.shtmlhttp://www.firsteelplate.com/Content/439.shtmlhttp://www.firsteelplate.com/Content/440.shtmlhttp://www.firsteelplate.com/Content/440.shtmlhttp://www.firsteelplate.com/Content/441.shtmlhttp://www.firsteelplate.com/Content/443.shtmlhttp://www.firsteelplate.com/Content/443.shtmlhttp://www.firsteelplate.com/Content/445.shtmlhttp://www.firsteelplate.com/Content/445.shtmlhttp://www.firsteelplate.com/Content/446.shtmlhttp://www.firsteelplate.com/Content/446.shtmlhttp://www.firsteelplate.cn/Content/190.shtml#.U6Kmr7cwDGIhttp://www.firsteelplate.cn/Content/266.shtml#.U6KmhbcwDGIhttp://www.firsteelplate.cn/Content/427.shtmlhttp://www.firsteelplate.cn/Content/427.shtmlhttp://www.firsteelplate.cn/Content/432.shtmlhttp://www.firsteelplate.com/Content/431.shtmlhttp://www.firsteelplate.com/Content/429.shtml


2.9 Steel Plate Series—Oil pipeline steel plate/coil

Featured steel material: API 5L : Gr. B, X 42, X 52, X 60, X 65, X 70, X 80

ASTM/ASME/AISI/API:X 52,X 60,X 65,X 70,X 80,X 42

DIN:StE 290.7 TM,StE 360.7 TM,StE 415.7 TM,StE 445.7 TM,StE 480.7 TM

EN 10028-3:L 360MB,L 415MB,L 450MB,L 485MB,L 555MB,L 290MB

Pipeline steel refers to hot coil or wide and thick plate used in manufacture of large

diameter welding steel pipeline for oil, and natural gas transferring.

Steel plates for this kind of use should have high compressive strength, high temperature

toughness and excellent weldability.

Our company supplied more than 80 thousand tons of X70/X65 pipeline steel for China

West-east NG transmission project. Our products are mainly used for making

themain/branch/stations transmission line pipes.

http://www.firsteelplate.cn/Content/168.shtml#.U5gLznKSy4khttp://www.firsteelplate.cn/Content/169.shtml#.U5gLnnKSy4khttp://www.firsteelplate.cn/Content/171.shtml#.U5gLhHKSy4khttp://www.firsteelplate.cn/Content/172.shtml#.U5gLb3KSy4khttp://www.firsteelplate.cn/Content/173.shtml#.U5gLWHKSy4khttp://www.firsteelplate.cn/Content/174.shtml#.U5gLBXKSy4khttp://www.firsteelplate.cn/Content/169.shtml#.U5gLnnKSy4khttp://www.firsteelplate.cn/Content/171.shtml#.U5gLhHKSy4khttp://www.firsteelplate.cn/Content/172.shtml#.U5gLb3KSy4khttp://www.firsteelplate.cn/Content/173.shtml#.U5gLWHKSy4khttp://www.firsteelplate.cn/Content/174.shtml#.U5gLBXKSy4k


2.10 Steel Plate Series—Nuclear power steel plate

Material: 18MnD5, SA516, SA533,SA738, P265GH, P295GH, P355GH

ASTM/ASME/AISI/API:SA738,SA533,GrBCl1,SA533,SA516

NF:16MnD5,18MnD5,16MND5,A48CPR

EN 10028-3:P265GH,P295GH,P355GH

The range of size demension: 8~300mm x 1500~4000mm x 2000~18000mm

Delivery status: Normalizing, Quenching+Tempering, Normalizing+Tempering,

Nuclear power steel is applied for fabrication of conventional island or nuclear island

components, such as reaction island safty liner, safety gate, safety container, high

pressure heating equipment, evaporator, etc.

Our nuclear power steel conforms to French RCC-M and ASME nuclear standards.

Our 20HR,16MnHR nuclear power steel has already been used in China Lin'ao and

Qinshan Nuclear power station, and supplied a total quantity weight of 13 thousand tons.

16MnD5 high quality steel is applied for making voltage stablizer which is the critical

equipment of nuclear power station.

Application:Reactor pressure vessel, steam converter, stabilizer steel material:SA533 B

Reactor safety containment: P235GH, P265GH, P355GH, SA516 GR70

Relavant quality standard systerm:RCC-M2000+2002,NCA3800+ND, NC, NF2000.

http://firsteelplate.com/Content/409.shtmlhttp://firsteelplate.com/Content/309.shtmlhttp://firsteelplate.com/Content/237.shtmlhttp://firsteelplate.com/Content/307.shtmlhttp://firsteelplate.com/Content/307.shtml


2.11 Steel Plate Series—Boiler and pressure vessel steel plate

Featured Boiler steel grade: ASTM : A515Gr.60,A515Gr.70,A299 JIS:SB410,SB460

DIN:HII,17Mn4,19Mn6

ASTM:A285gr.A/B/C,A 299,A442

Gr.55/60,A515gr.55/60/65/70,A516gr.55 ,A516gr.65,A516gr.70,A 537class

1,A662Gr.C,A387Gr.12,A204Gr.B

JIS:SPV490Q,CF62,SPV 355,SB410,SB460,SB480,SCMV2,SCMV4,SB49M

EN10028:P355M/ML1/ML2,P420M/ML1/ML2,P460M/ML1/ML2,P355Q/QH/QL1/QL2,P4

60Q/QH/QL1/QL2,P500Q/QH/QL1/QL2,P690Q/QH/QL1/QL2,P355N

Featured Pressure vessel steel grade:

ASTM:A662Gr.C,A387Gr.12,A387Gr.22,A204Gr.B

JIS:SPV355,SLA33,SCMV2,SCMV4,SB49M

DIN:EStE355,13MnNiMo54,BHW35,13CrMo44,10CrMo910,15Mo3,13CrMoV42

Steel for Boilers and Pressure Vessels includes low temperature low alloy steel and

quenched and tempered high strength steel. Widely used in petroleum & chemical

industry, power station, boiler etc., and suitable for making parts, such as reactor,

transducer, separator, sphere vessel, oil tank, Liquefied gas tank pressure vessel of

atomic rector, boiler drum, LP gas cylinder, high pressure pipe for hydroelectric station,

spiral water turbine frame, etc.

http://www.firsteelplate.cn/Content/181.shtml#.U60v0JSSy4khttp://www.firsteelplate.cn/Content/181.shtml#.U60v0JSSy4khttp://firsteelplate.com/Content/250.shtmlhttp://firsteelplate.com/Content/181.shtmlhttp://firsteelplate.com/Content/220.shtmlhttp://firsteelplate.com/Content/221.shtmlhttp://firsteelplate.com/Content/222.shtmlhttp://firsteelplate.com/Content/228.shtmlhttp://firsteelplate.com/Content/228.shtmlhttp://firsteelplate.com/Content/176.shtmlhttp://firsteelplate.com/Content/377.shtmlhttp://firsteelplate.com/Content/351.shtmlhttp://firsteelplate.com/Content/39.shtmlhttp://firsteelplate.com/Content/369.shtmlhttp://firsteelplate.com/Content/373.shtmlhttp://firsteelplate.com/Content/376.shtmlhttp://firsteelplate.com/Content/376.shtmlhttp://firsteelplate.com/Content/378.shtmlhttp://firsteelplate.com/Content/379.shtmlhttp://firsteelplate.com/Content/150.shtml


2.12 Steel Plate Series— Shipbuilding and ocean platform steel

Material : AH32, AH36, AH40, DH32, DH36, DH40, EH32, EH36, EH40, FH36,

FH32,FH40 (Z15.Z25.Z35), etc.

ASTM:A387Gr11,A514,A516,A517GrQ

BS:S355G10+N,S355G7+M,S355G8+M

Our representative product of this kind is high strength ship building steel. We supply

certificated grade E40 steel of thickness up to 100mm. Grade E50 steel is for making ship

requiring good welding property and ocean machinery equipment, with the maximum

thickness of 60mm, yield strength over 500Mpa, tensile strength between 610~770Mpa,

bearing impact of transverse 33Joule at -40℃.

Our ship building steel plates are accepted and certificated by nine classification societies.

Standard: According to user's requirements, the following criteria can be delivered:

CCS、DNV、GL、LR、BV、KR、ABS、API、RINA、NK、ASTM.

Size dimension: Thickness: 8mm-650mm, Width: 1500-4020mm, Length:

3000-27000mm.

Processing Treatment: steel cutting (sawing), welding pretreatment (derusting,

lacquering, painting, sand clusting), test( UT, HIC, Impact test, PWHT Z15, Z25, Z35, and

so on ), and other services.

Quality Level: A, B, C, D, E and thickness Z15, Z25, Z35. Inspection Standard: in

accordance with China (JB4730, GB/ T2970), United States (A435, A577, A588), Japan

(JISG0801, JISG0901), Germany (SEL072), British (BS5996), France (NFS04-305) and

other domestic and international testing standards.

http://www.firsteelplate.cn/Content/224.shtml#.U5gSeXKSy4khttp://www.firsteelplate.cn/Content/225.shtml#.U5j2Q3KSy4khttp://www.firsteelplate.cn/Content/226.shtml#.U5j3W3KSy4khttp://firsteelplate.com/Content/223.shtmlhttp://firsteelplate.com/Content/222.shtmlhttp://firsteelplate.com/Content/362.shtml


2.13 Steel Plate Series— Low-alloy high-strength steel plate

JIS:SM490(A,B,C),SM41A.B.C,SM50A.B.C,SM58,Wel-Ten60,Cor-TenB,SM570,SM520,

SN490（B,C),SN400（A,B,C）

ASTM:A572M(Gr42,50,55,65),A633(A,B,D,E),A588Gr.A,A588Gr.B,A588Gr.C,A588Gr.

K

EN10025-4:S275(N,NL),S355(N,NL),S420(N,NL),S460(N,NL)

DIN:S460NL,St70-2,St60-2,St52-3,S355J2/J0,S420NL,,S500MC （1.0984）

High strength low alloy structural steel is steel added with certain alloying elements

accounting for less than 5% in the melting process. Adding alloying elements can

significantly improve the strength of steel, and the three major indexes of the steel

structure as strength, stiffness and stability can give full play. Due to different quality, high

strength low alloy structural steel is divided into A, B, C, D, E grade.

High strength steel: This is a kind of high strength steel which also gives excellent low

temperature toughness.

Cold steel: It belongs to ferritic cryogenic steel. By reducing reduce phosphorus, sulfur

content, the purity of the steel can be increased and get a lower ductile - brittle transition

temperature.

Corrosion resistant steel: Such steel has a certain degree of resistance to corrosion

caused by the atmosphere, water, hydrogen sulfide and other environmental factors. For

example, 10MnPNbRE steel is corrosion resistant to marine atmosphere and seawater,

which makes it suitable materials for ships, sheet piles, and derricks.

http://www.firsteelplate.cn/Content/46.shtml#.U6KeQrcwDGIhttp://firsteelplate.com/Content/418.shtmlhttp://www.firsteelplate.cn/Content/255.shtml#.U6Ke77cwDGIhttp://firsteelplate.com/Content/267.shtmlhttp://firsteelplate.com/Content/325.shtmlhttp://firsteelplate.com/Content/326.shtmlhttp://firsteelplate.com/Content/327.shtmlhttp://firsteelplate.com/Content/329.shtmlhttp://firsteelplate.com/Content/329.shtmlhttp://www.firsteelplate.cn/Content/141.shtml#.U6KesrcwDGIhttp://firsteelplate.com/Content/323.shtmlhttp://firsteelplate.com/Content/254.shtmlhttp://firsteelplate.com/Content/162.shtmlhttp://www.firsteelplate.cn/Content/165.shtml


2.14 Steel Plate Series—Wear-resistant steel plate

718/ 2738 ,S45C-S55C, 40Cr, SM45-SM55, SM3Cr2Mo, WSM30A, SM3Cr2Ni1Mo,P30A,

6388, P80A, 638B. etc.

ASTM:1053,1551,1561,1566,AISI-P20/GS2311

JIS:S58C, H52B, S53C,G15610

DIN:65Mn4,CK60,2C60,2C50,1.233

Wear resistant steel plates have good properties of high strength/high wear

resistant/stability/straightness/surface quality, etc. High hardness, highstrength, and

perfect impact toughness make it a perfect material in extensive applications, such as

wear resistant parts of equipment for: underground mine/cement industry/highway

building/mining/metallurgy. The thickness of our products are between 8-100MM,

hardness up to 500HBW .Brief introduction of four categories of wear resistant steel

plates:

Ordinary wear resistant steel:Thickness of this series of steel plates can be up to

100MM, with proper hardness and toughness. The repreventative grades are WNM360、

WNM400.

Super wear resistant steel: With longer operation life time, this series of products can

decrease operating costs. Without sacrificing much weldability and forming property, this

kind of steel plate proves to be highly wear-resistant. The representative grades are

WNM450、WNM500.

High toughness wear resistant steel: This kind of steel has good toughness even under

-40℃, and can bear strong impact under low temperature. Representative grades are

WNM360、WNM400 series. Good weldability

wear resistant steel: This series of steel plates ensure the same weldability with

common material under harsh welding conditions. Representative grade is WNM360L.


2.15 Steel Plate Series—Carbon structural steel plate

ASTM: A283Gr.D，1010，1030，1035，1045，1050/1049，

1055,A830,A572Gr42/50,A573Gr58/65/70,

JS:S50C/S53C,S235,S355,SS330,SS400,SS490,SPHC,SS400,SS50,SS34,SS41,S10C/

S12C,S25C/S28C,S30C/S33C

DIN:St37-2,St44-2,St50-2

Carbon structural steel: The carbon content of this kind of steel ranges from 0.05% to

0.70%, and a very few steel grade carbon content can reach 0.90%. There are generally

two categoriesof carbon structural steel: common carbon structural steel and high quality

carbon structural steel.

Common carbon structural steel: The carbon content is generally under 0.30%, and

manganese content no more than 0.80%. Though strength of common carbon structural

steel is low, its plasticity, toughness, and cold deformation is good. Usually it is used

directly without heat treatment. Common carbon structural steel mainly used for

railway/bridge/construction, and for making various common components not requiring

heat treatment.

High quality carbon structural steel:high quality carbon structural steel According to its

carbon content and different use, this kind of steel is roughly divided into three types: ①

low carbon steel with carbon content of less than 0.25%: the presentatives of this kind of

steel are 08F, 08Al whose carbon content is less than 0.10%. These two types of steel

have very good deep drawability and weldability; ② medium carbon steel with carbon

content of 0.25~0.60%, mainly used under modulation condition and for manufacturing of

equipment parts in mechine-building industry; ③ high carbong steel with carbon content

of over 0.6%, mainly used for manufacturing of springs, rolls and gears.

http://firsteelplate.com/Content/184.shtmlhttp://firsteelplate.com/Content/337.shtmlhttp://firsteelplate.com/Content/341.shtmlhttp://firsteelplate.com/Content/342.shtmlhttp://firsteelplate.com/Content/344.shtmlhttp://firsteelplate.com/Content/345.shtmlhttp://firsteelplate.com/Content/346.shtmlhttp://www.firsteelplate.cn/Content/177.shtml#.U5kJaXKSy4khttp://firsteelplate.com/Content/45.shtmlhttp://www.firsteelplate.cn/Content/152.shtml#.U5kKlnKSy4khttp://www.firsteelplate.cn/Content/205.shtml#.U46lr3KSy4khttp://www.firsteelplate.cn/Content/35.shtml#.U46Y2nKSy4khttp://www.firsteelplate.cn/Content/163.shtml#.U6u4wJSSy4khttp://www.firsteelplate.cn/Content/161.shtml#.U6u4ipSSy4k


2.16 Steel Plate Series—Corrosion-resistant steel plate

JIS G3114: SMA50AW,SMA50CP

EN10025-5: WR50B, WR50C

ASTM:A588-A242Gr.1,A588Gr.A,A709Gr.50W,CortenA,CortenB,HIC,08Cu,16MnCu,10

CrMoAl,St37-3Cu3

EN10028-3:S355J0W,S460NH,S235J2W,S355J0WP,S355J2G1W,S355J2G2W,S355K2

G1W,S355K2G2W

BS 4360: WR 50 A, WR 50 B, WR 50 C,

CSA G 4021: gr 350 -A AT, gr 400-A AT

Weathering resistant steel, namely atmospheric corrosion resistant steel, belongs to the

low alloy steel series between common steel and stainless steel. Weathering resistant

steel is made from common steel by adding a small amount of corrosion resistant

elements such as copper and nickel. It has the properties of high quality steel like good

toughness, plasticity, mouldability, weldability, and resistance to corrosion, high

temperature and abrasion; weather resistance is 2~8 times than common carbon steel;

and coating performance is 1.5~10 times than common carbon steel. Besides, weathering

resistant steel has good resistance to rust, can highly improve the performance and

extend service life of structure parts, thus is used to make structural parts used in open

atmospheres, corrosive gas and liquid environment.

Weathering resistant steel is mainly used to build structural parts of containers, railway

vehicles, oil derricks, seaport buildings, oil production platforms and vessels containing

H2S corrosion medium in petro-chemical equipment.

http://firsteelplate.com/Content/317.shtmlhttp://firsteelplate.com/Content/233.shtmlhttp://firsteelplate.com/Content/144.shtml


3 Our Network

Supioneer Metal Materials Co., Ltd tries its best to integrate the advanced

technology, excellent talents and advanced concept to support the development of the

company, and ensure that our business partners get products which suit their demands

the best.

The sales network of our company widely spread in India, Pakistan, Australia,

Korea, Japan, etc.

Henan Supioneer Metal Materials Co., Ltd

河南世迪金属材料有限公司

http://www.firsteelplate.com

Email: [email protected]

Tel: 86-371-5503 1185

Fax: 86-371-8622 0366
http://www.firsteelplate.cn/List/43.shtmlhttp://www.firsteelplate.com/mailto:[email protected]

supioneer metal materials co., ltd...loads and impacts of vehicles. besides, it is required to be...

Documents