supplementary en de fr es it ru - yamaha … supplementary manual explains mainly the functionality...

RU

IT

ES

FR

DE

EN

V2.0

SupplementaryManual

Eng

lish

Deu

tsch

Fra

nçai

sE

spañ

olIt

alia

no

2

This supplementary manual explains mainly the functionality that was changed or added in version 2.0 of the M7CL firmware. Please read this in conjunction with the M7CL V1.1 supplementary manual and the M7CL Owner’s manual.

You can download the most recent version of the Help file from the Yamaha website.

http://www.yamahaproaudio.com/

■

Input channel operations

• Now the top panel faders can also be used to adjust the send levels from input channels to MATRIX buses (p. 3).

• In SENDS ON FADER mode, the send-destination MATRIX bus can now be selected by pressing the [MATRIX] navigation key and then pressing a [SEL] key in the Centralogic section (p. 3).

• The various channel parameters can now be saved together in internal memory as channel library data (p. 3).

■

Output channel operations

• The various channel parameters can now be saved together in internal memory as channel library data (p. 3).

■

Input/output patching

• You can now select POST ON (immediately after the fader and [ON] key) as the insert or direct output posi-tion (p. 4).

• When specifying or clearing a GEQ insertion, insert will now be turned on/off automatically (p. 4).

■

EQ and Dynamics

• The minimum level for an input channel’s GATE threshold level is now -72 dB (p. 4).

■

Grouping and linking

• When you enable channel link, HA gain and fader oper-ations will now be linked while maintaining the level difference between channels (p. 5).

■

Scene memory

• You can now use the Global Paste function to easily modify parameters across multiple scenes (p. 6).

• Recall Safe for the attenuator can now be selected inde-pendently of EQ (p. 7).

■

Monitor/Cue

• A monitor fader has been added to the monitor output level control, allowing you to use the STEREO MAS-TER fader / MONO MASTER fader to control the level (p. 5).

■

User settings

• M7CL V2 Editor now allows you to make the same user-defined key settings as on the console itself (p. 7).

• Additional functions are now available for assignment to the user-defined keys (p. 7).

• Regarding compatibility of data you create (p. 7).

Main changes

m7cl_v2_en.fm Thursday, June 25, 2009 5:16 PM

3

You can now use the top panel faders to adjust the send levels from input channels not only to MIX buses but also to MATRIX buses.

In SENDS ON FADER mode, you can now use the MIX/MTRX ON FADER button to switch between the MIX buses and MATRIX buses as the send destinations.

[When MIX ON FADER mode is ON]

[When MATRIX ON FADER mode is ON]

1

MIX/MTRX ON FADER select button

Each time you press this button, you’ll switch between MIX ON FADER mode and MATRIX ON FADER mode.

B

MIX/MATRIX bus select button

Use these buttons to switch the send destination MIX bus or MATRIX bus. The buttons will be joined if two buses are set to stereo.

In SENDS ON FADER mode, the send-destination MATRIX bus can now be selected by pressing the [MATRIX] navigation key and then pressing a [SEL] key in the Centralogic section.

Until now, EQ and dynamics were managed as individual libraries, but now the channel parameters (including HA settings) can be managed together in units of channels as channel library data, and stored, recalled, or cleared from internal memory.You can recall 200 different settings each from the input channel library and the output channel library. For both input and output libraries, only 000 (Initial Data) is a read-only preset.

The basic operations are the same for input channels and output channels.

1

Use the [SEL] keys to select the channel whose settings you want to manage.

2

Press an encoder of the SELECTED CHAN-NEL section to access the SELECTED CHANNEL VIEW screen.

3

Press the LIBRARY tool button to access the INPUT CHANNEL LIBRARY window / OUTPUT CHANNEL LIBRARY window.

The library window contains the following items.

[INPUT CHANNEL LIBRARY]

Using the faders to adjust the send levels to the MATRIX buses

(MATRIX ON FADER mode)

1

2

1

2

Using the Centralogic section’s [SEL] keys to select a MATRIX bus

Input/output channel library support

Using the channel library

3

4 5 6


4

[OUTPUT CHANNEL LIBRARY]

1

CURRENT TYPE (OUTPUT CHANNEL LIBRARY only)

Displays the type of channel selected by the [SEL] key.

B

Library type (OUTPUT CHANNEL LIBRARY only)

Displays the type of channel for the library item in the list.

C

Library list

Selects the library item that will be the object of the opera-tion. The selected library item will move to the center, and will be highlighted.

D

STORE button

Stores the settings of the currently selected channel into the selected location of the list. When you press this button, the LIBRARY STORE window will appear, allowing you to name the settings.

E

RECALL button

Recalls the settings shown in the list into the currently selected channel.

F

CLEAR button

Clears (deletes) the library item selected in the list. When you press this button, a dialog box will ask you to confirm the Clear operation.

4

By turning any one of the multifunction encoders, move the highlighted line in the list to select the library number you want to store, recall, or clear.

5

Press the STORE button, RECALL button, or CLEAR button.

The rest of the steps are the same as for other libraries.

You can now select POST ON (immediately after the fader and [ON] key) as the insert or direct output position for input/output channels.

If a rack in which a GEQ is mounted is specified as the insert-out or insert-in, the other patch point will automati-cally be assigned to the same rack. At the same time, insertion is now automatically turned on. Additionally, if you defeat the insert-out or insert-in of a rack in which a GEQ is mounted, the other patch point will automatically be defeated, and insertion will automatically be turned off.

The minimum threshold level for an input channel GATE is now -72 dB.

1

23

4 5 6

• For the output channel library, if the type of channel selected by the [SEL] key differs from the type of channel selected in the list, an indication of “CONFLICT” is shown at the right of CURRENT TYPE. Recall can be executed even if the “CON-FLICT” indication is shown, but since the constituent parame-ters will be different, parameters that do not exist in the library will be set to their default values.

NOTE

• If you recall to a channel that is channel-linked, linking will be cancelled for the recalled channel.

NOTE

POST ON added as an insert / direct out position

Insert is automatically turned on/off when GEQ insertion is enabled

or cancelled

Changed minimum value of the GATE threshold level


5

When you enable channel link, HA gain and fader opera-tions will now be linked while maintaining the level dif-ference between channels of the link group.

●

Temporarily defeating link

For parameters (HA gain and fader) that preserve their rel-ative level differences when linked, you can temporarily defeat linking for all linked channels, for example when you need to adjust the level balance between channels of a link group. Hold down the [SEL] key of the channel whose balance you want to adjust, and operate the param-eter that you want to modify. While you’re holding down the [SEL] key, the HA gain and fader will not be linked. (However, temporary unlinking is not possible during the fade that occurs when a scene memory is recalled.)

A monitor fader has been added to the monitor output level control, allowing you to use the STEREO MASTER fader / MONO MASTER fader to control the level.You can now also use the [ON] key of the MONO channel and STEREO channel to turn the monitor output on/off.A new MONITOR FADER field has been added in the MONITOR screen and the MONITOR popup window.

[MONITOR screen]

[MONITOR popup window]

1

MONITOR FADER LEVEL

Indicates the current monitor fader.

B

FADER ASSIGN MODE button

Each time you press this button of the MONITOR popup window, you will alternate between NONE

→

STEREO

→

MONO

→

NONE.If you select STEREO, you’ll be able to use the top panel STEREO MASTER fader to control the monitor fader. You can also use the [ON] key located above the STEREO MAS-TER fader to turn the monitor output on/off. If you select MONO, you’ll be able to use the top panel MONO MASTER fader to control the monitor fader. You can also use the [ON] key located above the MONO MASTER fader to turn the monitor output on/off.

Channel link level differences maintained, and can temporarily defeated

Using the STEREO/MONO MASTER fader to adjust the monitor output level

1

21

• The monitor fader and MONITOR LEVEL knob are located in series. The top panel MONITOR LEVEL knob is still valid even when you’re using this function to adjust the monitor level. The monitor signal will not be output if the MONITOR LEVEL knob is set to the minimum position.

• The [ON] key of the STEREO channel or MONO channel will operate in tandem with the MONITOR screen’s OUTPUT but-ton. The PHONES OUT jack will always output the monitor signal, regardless of whether the OUTPUT button is on or off.

• You can also assign a user-definable key to switch the FADER ASSIGN MODE setting (p. 7).

• The MONITOR button of the function access area is shown in red for STEREO or in yellow for MONO, depending on the FADER ASSIGN MODE setting.

NOTE


6

“Global Paste” is a function that lets you copy and paste settings of the desired channel or parameter from the cur-rent scene to scene data in memory (multiple selections are allowed). This is a convenient way in which changes to the current scene can be applied to multiple scenes that have already been stored.

1

In the function access area, press the SCENE field to access the SCENE LIST win-dow.

2

In the lower right of the SCENE LIST win-dow, press the GLOBAL PASTE button to access the GLOBAL PASTE window.

In this screen you can select the copy-source channels/parameters and specify the paste-destination scene data.

3

Use the tabs to select the items to be cop-ied from the following choices.

4

Select the copy-source channels and parameters.

The display will depend on the tab you selected.You cannot select different parameters for each chan-nel.Use the top panel [SEL] keys to select a channel.

●

INPUT tab

Select the input channel in the upper left, and its parameters in the lower left.You can select the following parameters.

●

OUTPUT tab

Select the output channel in the upper left, and its parameters in the lower left.You can select the following parameters.

●

RACK tab

Select RACK 1–8.

●

PATCH/NAME tab

Select from INPUT PATCH, INPUT NAME, OUT-PUT PATCH, and OUTPUT NAME.

5

In the DESTINATION SCENE area, select the range of paste-destination scenes.

The data will be pasted to all scenes in the range between FROM and TO. Use multi-function encoder 7 to select FROM, and multi-function encoder 8 to select TO.

6

Press the PASTE button.

The selected items of the current scene will be pasted to the scene(s) in memory.A progress bar will be shown while the Paste opera-tion is being performed.The STOP button is shown while the Paste function is being executed; you can stop by pressing this button. In this case, the Paste function will have been partially executed, and the data cannot be restored to its previ-ous state.

INPUT

Input channels and parameters

OUTPUT

Output channels and parameters

RACK

RACK 1–8

PATCH/NAME

Input/output patching and channel names

Using the Global Paste function to change multiple scenes in a single operation

Using the Global Paste function

• The Global Paste function can be used only by users for whom SCENE LIST STORE/SORT is turned on in their user level set-tings.

NOTE

ALL

All input channel parameters (except INPUT PATCH and INPUT NAME)

HA

Settings for the head amp assigned to the corresponding input channel

ATT

Attenuator

EQ

EQ settings

DYNA1

Dynamics 1 settings (including KEY IN SOURCE and KEY IN FILTER)

DYNA2

Dynamics 2 settings (including KEY IN SOURCE)

MIX ON/SEND

Send to MIX bus on/off, send level, pan, and PRE/POST

MTRX ON/SEND

Send to MATRIX bus on/off, send level, pan, and PRE/POST

FADER

Fader level

CH ON

[ON] key on/off status

ALL

All output channel parameters (except OUTPUT PATCH and OUTPUT NAME)

ATT

Attenuator

EQ

EQ settings

DYNA1

Dynamics 1 settings (including KEY IN SOURCE and KEY IN FILTER)

MATRIX ON

Send to MATRIX bus on/off (only for MIX and STEREO/MONO channels)

MATRIX SEND

Send level to MATRIX bus, pan, PRE/POST (only for MIX and STEREO/MONO channels)

FADER

Fader level

CH ON

[ON] key on/off status

WITH MIX SEND

Selects whether the send level sent from input channels to the selected MIX bus will be included in the pasted data.

WITH MATRIX SEND

Selects whether the send level sent from input channels to the selected MATRIX bus will be included in the pasted data.


7

Recall Safe for the attenuator can now be selected inde-pendently of EQ.

In addition, the stereo, LINK, RECALL SAFE, and USER LEVEL behavior of other mixing parameters has also been changed. For details, refer to the "Mixing parameter operation applicability" on the back of the included block diagram.

M7CL V2 Editor now allows you to make the same user-defined key settings as on the console itself. For details on how to make these settings, refer to the M7CL V2 Editor Owner’s manual.

Data created with firmware 2.0 (scenes, library data, setup data, etc.) cannot be loaded into an M7CL console that is using firmware V1 (any version prior to V2.0). However, data created on an M7CL with firmware V1 can be loaded into an M7CL that is using firmware V2.0.

Recall Safe settings made independently for the attenuator

Assigning user-defined keys from M7CL V2 Editor

FunctionPARAME-

TER 1PARAME-

TER 2Explanation

MONI-TOR ON MASTER (FADER ASSIGN MODE)

STEREO MASTER

LATCH The key will switch whether the STEREO MASTER fader will be used to control the moni-tor level

UNLATCH The STEREO MASTER fader will be used to con-trol the monitor level while the key is held down

MONO MASTER

LATCH The key will switch whether the MONO MASTER fader will be used to control the moni-tor level

UNLATCH The MONO MASTER fader will be used to con-trol the monitor level while the key is held down

SENDS ON FADER

MATRIX 1-8

–

Switches the MATRIX ON FADER function on/off for the selected MATRIX

MIX ON FADER –

Switches the MIX ON FADER function on/off

MATRIX ON FADER –

Switches the MATRIX ON FADER function on/off

SENDS ON FADER –

Switches the SENDS ON FADER function on/off

M7CL EDITOR CON-TROL

LIBRARY INPUT CH Opens the M7CL V2 Edi-tor’s Library window -INPUT CH tab

OUTPUT CH

Opens the M7CL V2 Edi-tor’s Library window -OUTPUT CH tab

HOME SELECTED CH VIEW –

Displays the SELECTED CHANNEL VIEW screen

OVERVIEW–

Displays the OVERVIEW screen

MOMEN-TARY

–

Each press of the key will alternately display the SELECTED CHANNEL VIEW screen and the OVERVIEW screen

Functions that can be assigned to user-defined keys

Compatibility of created data


Information for Users on Collection and Disposal of Old Equipment

This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste.For proper treatment, recovery and recycling of old products, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC.

By disposing of these products correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling.

For more information about collection and recycling of old products, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items.

[For business users in the European Union]

If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.

[Information on Disposal in other Countries outside the European Union]

This symbol is only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal.

Verbraucherinformation zur Sammlung und Entsorgung alter Elektrogeräte

Befindet sich dieses Symbol auf den Produkten, der Verpackung und/oder beiliegenden Unterlagen, so sollten benutzte elektri-sche Geräte nicht mit dem normalen Haushaltsabfall entsorgt werden.In Übereinstimmung mit Ihren nationalen Bestimmungen und den Richtlinien 2002/96/EC, bringen Sie alte Geräte bitte zur fachgerechten Entsorgung, Wiederaufbereitung und Wiederverwendung zu den entsprechenden Sammelstellen.

Durch die fachgerechte Entsorgung der Elektrogeräte helfen Sie, wertvolle Ressourcen zu schützen und verhindern mögliche negative Auswirkungen auf die menschliche Gesundheit und die Umwelt, die andernfalls durch unsachgerechte Müllentsor-gung auftreten könnten.

Für weitere Informationen zum Sammeln und Wiederaufbereiten alter Elektrogeräte, kontaktieren Sie bitte Ihre örtliche Stadt- oder Gemeindeverwaltung, Ihren Abfallentsorgungsdienst oder die Verkaufsstelle der Artikel.

[Information für geschäftliche Anwender in der Europäischen Union]

Wenn Sie Elektrogeräte ausrangieren möchten, kontaktieren Sie bitte Ihren Händler oder Zulieferer für weitere Informationen.

[Entsorgungsinformation für Länder außerhalb der Europäischen Union]

Dieses Symbol gilt nur innerhalb der Europäischen Union. Wenn Sie solche Artikel ausrangieren möchten, kontaktieren Sie bitte Ihre örtlichen Behörden oder Ihren Händler und fragen Sie nach der sachgerechten Entsorgungsmethode.

EN

DE

m7cl_v2_en_cover4.fm Page 1 Thursday, June 25, 2009 5:16 PM

Information concernant la Collecte et le Traitement des déchets d’équipements électriques et électroniques.

Le symbole sur les produits, l’emballage et/ou les documents joints signifie que les produits électriques ou électroniques usa-gés ne doivent pas être mélangés avec les déchets domestiques habituels.Pour un traitement, une récupération et un recyclage appropriés des déchets d’équipements électriques et électroniques, veuillez les déposer aux points de collecte prévus à cet effet, conformément à la réglementation nationale et aux Directives 2002/96/EC.

En vous débarrassant correctement des déchets d’équipements électriques et électroniques, vous contribuerez à la sauve-garde de précieuses ressources et à la prévention de potentiels effets négatifs sur la santé humaine qui pourraient advenir lors d’un traitement inapproprié des déchets.

Pour plus d’informations à propos de la collecte et du recyclage des déchets d’équipements électriques et électroniques, veuillez contacter votre municipalité, votre service de traitement des déchets ou le point de vente où vous avez acheté les pro-duits.

[Pour les professionnels dans l’Union Européenne]

Si vous souhaitez vous débarrasser des déchets d’équipements électriques et électroniques veuillez contacter votre vendeur ou fournisseur pour plus d’informations.

[Information sur le traitement dans d’autres pays en dehors de l’Union Européenne]

Ce symbole est seulement valables dans l’Union Européenne. Si vous souhaitez vous débarrasser de déchets d’équipements électriques et électroniques, veuillez contacter les autorités locales ou votre fournisseur et demander la méthode de traitement appropriée.

Información para Usuarios sobre Recolección y Disposición de Equipamiento Viejo

Este símbolo en los productos, embalaje, y/o documentación que se acompañe significa que los productos electrónicos y eléc-tricos usados no deben ser mezclados con desechos hogareños corrientes.Para el tratamiento, recuperación y reciclado apropiado de los productos viejos, por favor llévelos a puntos de recolección apli-cables, de acuerdo a su legislación nacional y las directivas 2002/96/EC.

Al disponer de estos productos correctamente, ayudará a ahorrar recursos valiosos y a prevenir cualquier potencial efecto negativo sobre la salud humana y el medio ambiente, el cual podría surgir de un inapropiado manejo de los desechos.

Para mayor información sobre recolección y reciclado de productos viejos, por favor contacte a su municipio local, su servicio de gestión de residuos o el punto de venta en el cual usted adquirió los artículos.

[Para usuarios de negocios en la Unión Europea]

Si usted desea deshacerse de equipamiento eléctrico y electrónico, por favor contacte a su vendedor o proveedor para mayor información.

[Información sobre la Disposición en otros países fuera de la Unión Europea]

Este símbolo sólo es válidos en la Unión Europea. Si desea deshacerse de estos artículos, por favor contacte a sus autorida-des locales y pregunte por el método correcto de disposición.

Informazioni per gli utenti sulla raccolta e lo smaltimento di vecchia attrezzatura

Questo simbolo sui prodotti, sull’imballaggio, e/o sui documenti che li accompagnano significa che i prodotti elettriche e elettro-niche non dovrebbero essere mischiati con i rifiuti domestici generici.Per il trattamento, recupero e riciclaggio appropriati di vecchi prodotti, li porti, prego, ai punti di raccolta appropriati, in accordo con la Sua legislazione nazionale e le direttive 2002/96/CE.

Smaltendo correttamente questi prodotti, Lei aiuterà a salvare risorse preziose e a prevenire alcuni potenziali effetti negativi sulla salute umana e l’ambiente, che altrimenti potrebbero sorgere dal trattamento improprio dei rifiuti.

Per ulteriori informazioni sulla raccolta e il riciclaggio di vecchi prodotti, prego contatti la Sua amministrazione comunale locale, il Suo servizio di smaltimento dei rifiuti o il punto vendita dove Lei ha acquistato gli articoli.

[Per utenti imprenditori dell’Unione europea]

Se Lei desidera disfarsi di attrezzatura elettrica ed elettronica, prego contatti il Suo rivenditore o fornitore per ulteriori informa-zioni.

[Informazioni sullo smaltimento negli altri Paesi al di fuori dell’Unione europea]

Questo simbolo è validi solamente nell’Unione europea. Se Lei desidera disfarsi di questi articoli, prego contatti le Sue autorità locali o il rivenditore e richieda la corretta modalità di smaltimento.

FR

ES

IT

m7cl_v2_en_cover4.fm Page 2 Thursday, June 25, 2009 5:16 PM

+48V MASTER

+48V

+48V

+48V

+48V

+48V

ON

TALKBACKINPUT INPUT

SELECT

INPUTPATCH

[TALKBACKTALKBACK

OSCILLATOR

CASCADE IN

CASCADE OUT

MIX 1-16

CH 1-32 {48}

INSERT OUT 1-32 {48}

INSERT IN 1-32 {48}

CH INSERT IN 1-32 {48}

MIX INSERT IN 1-16

STEREO INSERT IN L,R,MONO (C)

PHONES LEVEL

MATRIX INSERT IN 1-8

INPUT]

[INPUT]

[ST IN]

[SLOT]SLOT1

SLOT2

SLOT3

ST IN L

ST IN R

[1L-4R]

[1-32 {48}]

TALKBACKGAIN

INPUT 12

3

12

3

12

3

12

3AD

AD

AD

ON

AD

GAIN/TRIM

GAIN/TRIM

GAIN/TRIM

HA

HA

HA

HA

METER

INPUT TB

INPUT 1-32 {48}

INSERT POINT

INSERT

POST PAN L

POST PAN R

POST ON

4BANDEQ

PRE EQ INSERT OUTPRE FADER INSERT OUT

POST ON INSERT OUT

ST IN1L-4R

SLOT1 1-16

PRE HPF

PRE HPF PRE EQ POST EQ

PRE EQ PRE FADER POST ON

POST ON

PAN LINK

MIX 1,3... 15

MIX 2,4... 16

MATRIX1,3...7

MATRIX2,4...8

LR MONO TO MONO TO ST

TO LCR

PRE FADER

METER

METER METER

To MIX POST ON

POST PAN L

PRE EQ / PRE FADER / POST ON




POST PAN R

To MIX

To MATRIX

To MATRIX

To MIX

To MIX

FIXED

VARI

VARI

FIXEDSTEREO

VARISTEREO

VARISTEREO

METERGR METER

KEYIN CUE

GR METERMETER

LEVEL/DCA 1-8

METER METER

BAL POST PAN LPOST PAN R

PAN MODEST L

ST R

ON

ON

ON

ON

ON

ON LEVEL

LEVEL

LEVEL

LEVEL

LEVEL

LEVEL

BAL

BAL

ON

ON

ON

ON

ON

ON

ON

SLOT2 1-16

SLOT3 1-16

SLOT3 1-16SLOT2 1-16SLOT1 1-16

RACK1 OUT

RACK2 OUT

RACK3 OUT

RACK4 OUT

RACK5 OUT

RACK6 OUT

RACK7 OUT

RACK8 OUT

A (L) / B (R)

A (L) / B (R)

A (L) / B (R)

A (L) / B (R)

A (L) / B (R)

A (L) / B (R)

A (L) / B (R)

A (L) / B (R)

INPUT 1-32 {48}

METER

METER

METER

METER METER METER METER

LEVEL

MATRIX CUE

CASCADEIN

SELECT

Sine WavePink NoiseBurst Noise

LR MONOMETER

METER

METER

INSERT INSERT

POST ON

MONO (C)

ST L

ST R

PAN

PAN

PAN

LEVEL

HPF LPF

ON

MIX ST

LEVEL

LEVEL

LEVEL

LEVEL

LEVEL

LEVEL

LEVEL/DCA1-8

METER

To CASCADE IN

To MONITORSELECT

SELECT

SLOTIN

METER METER METER

SLOTIN SLOTIN

16

16

16

RACK

RACKIN

PATCH

RACK1

RACK2 (same as RACK1)



KEYIN CUE

EFFECT CUE

KEYIN ST IN1L-4R

RACK 5-8 OUT L / R

KEYIN CUESELECT

EFFECT CUESELECT

DEFINEMIX

(MAX : 8ch)

KEYIN CH1-32 {48}

PHONES OUT LR

SLOT1

[PHONES]

[SLOT]

[OMNI OUT] (1-16)

[2TR OUT DIGITAL]

STEREO OUT L,R

MONITOR L

MONITOR R

MONITOR MONO (C)STEREO OUT

STEREO OUT

MIX OUT1-16MATRIX OUT1-8

MONO (C)

L,R

STEREO OUT MONO (C)STEREO OUT L,C,R

SLOT2

SLOT3

MIX CASCADE OUT 1-16

CUE CASCADE OUT L,R

DIRECT OUT 1-32 {48}

OUTPUTPATCH

OUTPUTPATCH

OUTPUTPATCH

MIX OUT 1-16STEREO OUT L,R,MONO (C)

MATRIX OUT 1-8MONITOR OUT L,R, MONO (C)

MIX INSERT OUT 1-16STEREO INSERT OUT L,R,MONO (C)

STEREO OUT L,R,MONO (C)

MONITOR OUT L,R,MONO (C)

MIX OUT 1-16STEEREO OUT L,R,MONO (C)

MONITOR OUT L,R,MONO (C)MATRIX OUT 1-8

MATRIX OUT 1-8

MIX OUT 1-16DIRECT OUT 1-32 {48}

MATRIX INSERT OUT 1-8

CH INSERT OUT 1-32 {48}

STEREO CASCADE OUT L,R,MONO (C)MATRIX CASCADE OUT 1-8




MIX OUT1-16

MATRIX OUT1-8

STEREO OUTL,R,MONO (C)

STEREO INSERT OUT

L,R,MONO (C)

MATRIXINSERT OUT

1-8

CHINSERT OUT

1-32 {48}

MIXINSERT OUT

1-16

RACK1 IN

RACK2 IN

RACK3 IN

RACK4 IN

RACK5 IN

RACK6 IN

RACK7 IN

RACK8 IN

A (L ) / B (R)

A (L ) / B (R)

A (L) / B (R)

A (L) / B (R)

A (L) / B (R)

A (L) / B (R)

A (L) / B (R)

A (L) / B (R)

METER

METERMETER

METER METER

METER

METER

METERMETER

METER

METER

METERMETER

METER

32 {48}

3

16

8

METER

METER

RACK IN

RACK IN A

RACK IN A RACK OUT A

RACK OUT

RACK OUT B

RACK OUT L

RACK OUT R

RACK IN

RACK IN B

RACK IN LRACK IN R

RACK IN B

RACK OUT

RACK OUT ARACK OUT B

31BandGEQ

31BandGEQ

Flex15GEQ

Flex15GEQ

EFFECT

RACK5

EFFECT CUE

32{48}

To RACKIN PATCHTo OUTPUT PATCH CH

CH

PRE HPF

(PRE FADER)PFL / (POST ON)AFL/POST PAN L

(PRE FADER)PFL/(POST ON)AFL / POST PAN L

To CHINSERT IN

To MIX INSERT IN

To STEREO INSERT IN

To MATRIX INSERT IN

(PRE FADER)PFL/(POST ON)AFL / POST PAN R

(PRE FADER)PFL / (POST ON)AFL/POST PAN R

INSERT OUT

PRE EQ EQ OUT DYNA1OUT PRE FADER

KEYIN CUE PRE FADERPRE FADER

POST ONINSERT OUT

POST ON

POST PAN RPOST PAN L

PAN MODE

PAN LINK

MIX1,3...15

MIX2,4...16

MATRIX1,3...7

MATRIX2,4...8

CUE L

CUE R





DYNA2OUT

PRE EQPRE HPF

KeyinSelf PRE EQ

Self POST EQMIX13-16 OUT

CH[1-8,9-16,17-24,25-32]POST EQ {32}CH[1-8,9-16,17-24,25-32,33-40,41-48]POST EQ{48}

KeyinSelf PRE EQ

Self POST EQMIX13-16 OUT

STCH 1L-4R POST EQ

PRE EQINSERT OUT

POST EQ

ATT

To MIX

To MIX

To MATRIX

To MATRIX

To MIX

To MIX

VARI

VARI

FIXED

FIXEDSTEREO

VARISTEREO

VARISTEREO

GATEDUCK

EXPANDCOMP

COMPCOMPANDDE-ESSER

HPF

GR METER GR METER

PRE HPF / PRE EQ / PRE FADER / POST ON

INSERTIN

PATCH

RACK1 OUTA (L) / B (R)




RACK5 OUTA(L) / B (R)




STCH 1L-4R

OUTPUTS

ATTHPF

ON

ON

EQ OUT DYNA 1OUT DYNA 2OUT

4BANDEQ

GATEDUCK

EXPANDCOMP

COMPCOMPANDDE-ESSER

Keyin Filter

Keyin Filter

LCR

CSR

MONO (C)

ON

ON

CUE R

CUE L

ON

To OUTPUT PATCHTo OUTPUT PATCH


To OUTPUT PATCHTo OUTPUT PATCHTo OUTPUT PATCH



To RACKIN PATCH INSERT POINT

4 BANDEQ

METER

LEVEL

LEVEL

LEVEL

METERMETER

Keyin

INSERT

LEVEL

METER METERPRE EQ

PRE EQINSERT OUT

INSERT

CUE ON

ST L

PAN

ST R

To RACKIN PATCH

To RACKIN PATCHTo OUTPUT PATCH

CUE TRIM(INPUT / OUTPUT / DCA)

To OUTPUT PACHINSERT POIN

GR METER

COMPCOMPANDEXPAND

DYNA OUTEQ OUT

LEVEL BALON

POST ON

POST ON

4BANDEQ

PRE EQ

ATTINSERT

PRE FADER

PRE FADER PRE FADERINSERT OUT

METER

INSERT

LEVEL ON

ON

ON

LEVEL

LEVEL

PAN

PRE EQ

PRE EQ POST EQ

INSERT

KeyinPRE FADER

MATRIX1-8 POST EQ

(PRE FADER) PFL / (POST ON) AFL

PRE FADERINSERT OUT

LEVEL

INSERT

POST ON

POST ON

ON

PRE EQ INSERT OUT

CUE ON

MONO

MONOMONITOR L

CUE LOGIC PHONESLEVEL LINK

CUE ON

DELAY(MAX:600ms)

(MAX:600ms)

(MAX:600ms)

(MAX:600ms)

(MAX:600ms)

DELAY

DELAY

DELAY

DELAY

TALKBACK ON An output port delay becomes invalid byassigning a monitor out to the output port

+MONO (C)

MONITOR DIMM ON

MONITOR R

MONITOR MONO (C)

CUE L

CUE R

ATT4BAND

EQ

EQ OUT DYNA OUT

GR METER

PRE FADERMETER

METER

METER

METER

METER

METER


CUE ON

MATRIX2,4...8

MATRIX1,3...7

PRE EQ POST EQ


MONO (C)

MATRIX1,3...7

MATRIX2,4...8

PRE EQ POST EQ PRE FADERINSERT OUT


PRE FADER / POST ON

PRE FADER / POST ON

EQ OUT

GR METER

DYNA OUT

COMPCOMPANDEXPAND

PRE FADER

To OUTPUT PATCH


OSC

L R (C) L R

SLOT 1 1-16SLOT 2 1-16SLOT 3 1-16

ONLCR TO LCR

TO MONO TO ST

CSR

ON

ON

ON

ON

ON

ON

ON

ON

ON

ON

To OUTPUT PATCHDIRECT OUT 1-32 {48}

INSERT OUT 1-16

INSERT IN 1-16

STEREOINSERT OUT L,R,MONO (C)

STEREOINSERT IN L,R,MONO (C)

MATRIX OUT 1-8

STEREO OUTL,R,MONO (C)

MATRIXINSERT OUT 1-8

MONITORLEVEL

MONITORFADER

PHONES L

PHONES R

MONITOR OUT L

MONITOR OUT R

MONITOR OUT MONO (C)

MATRIXINSERT IN 1-8

MIX OUT1-16

1 2 1516 1 2 7 8

MONO

MIX CASCADE OUT 1-16

MATRIX CASCADE OUT1-8

CUE CASCADE OUT LR

STEREO CASCADE OUT L,R,MONO (C)

PRE FADER INSERT OUTPOST ON INSERT OUT

PRE EQ INSERT OUTMIX

MIX

ON

VARI

STEREO

POST ON

POST ONPRE FADER

To MATRIX

PAN MODE TO ST

TO LCR LCR

CSR

VARI

To MATRIX

Self PRE EQ / Self POST EQ / MIX13-16 OUT/MIX(1-8,9-16)POST EQ

ATT

(13-16)To KEYINTo RACKIN PATCHTo OUTPUT PATCHTo MONITOR SELECT

To OUTPUT PATCHTo MONITOR SELECT

To OUTPUT PATCH

To PHONES OUT

To PHONES OUT

To OUTPUT PATCH

To OUTPUT PATCH

To OUTPUT PATCH

To MONITOR SELECT

ON

ON

ON

TO MONOPAN

LR MONO

POST ON

STEREO L,R,MONO(C)

MATRIX 1-8

CUE L

CUE R

POST ON INSERT OUTPRE FADER INSERT OUTPRE EQ INSERT OUT

PRE EQINSERT OUT

INSERT POINT

PRE FADER INSERT OUTPOST ON INSERT OUT

PRE EQ INSERT OUT

METER

SLOT2OUT

SLOT3OUT

OMINI OUT

2TR OUT

SLOT1OUT

DA

Tip

ST IN1 L,R

ST IN2 L,RST IN3 L,RST IN4 L,R

ST IN1 L,R

ST IN2 L,RST IN3 L,RST IN4 L,R

Ring

Sleeve2

16

16

16

2

21

316

METER

METER

METERATT

DA

DITAES / EBU

TRIM

ATT TRIM

ATT TRIM

METER

DELAY

DELAY(MAX:600ms)

DELAY

DELAY(MAX:600ms)

DELAY(MAX:600ms)

(MAX:600ms)

(MAX:600ms)

KeyinSelf PRE EQ / Self POST EQ / MIX13-16 OUT / ST (L,R,MONO (C)) POST EQ


PRE FADER / POST ON

PRE FADER / POST ON

To MATRIX

To MATRIX

VARISTEREO

VARI

COMPCOMPANDEXPAND

Self PRE EQ / Self POST EQ / MIX13-16 OUT/

DIM

ME

R

MO

NIT

OR

SE

LEC

T

ON

8

······

n M7CL-48/M7CL-32 V2.0 Block Diagram

INSERT

POST ONINSERT OUT

INSERT

POST ONINSERT OUT

INSERT

POST ONINSERT OUT

This table indicates how the behaviors of each of the input channel and output channel parameters are affected by Stereo, Link, Recall Safe, and User Level settings.

■

Input Channels

■

Mix Channels

■

Matrix Channels

■

STEREO, MONO Channels

■

DCA

*1

Linked parameters on ST IN Channels 1-4.*2Applies to parameters for which the MIX channel 1_16 individual Send Parameter setting and the item in the table are both enabled.*3Applies to parameters for which the MATRIX channel 1_8 individual Send Parameter setting and the item in the table are both enabled.

*4

User operation is allowed if the send-source channel’s “FADER/ON” is ON and the send-destination channel’s “WITH SEND” is ON.

*5

Linked if the send-destination channel is Stereo.

Mixing parameter operation applicability

Parameter Stereo

*1

CHANNEL LINK RECALL SAFE USER LEVEL Channel Library

HA

Gain O INPUT HA INPUT HA INPUT HA O

Phase INPUT HA INPUT HA O

+48V INPUT HA INPUT HA O

Name, Icon INPUT NAME INPUT NAME O

InsertOn INPUT ALL INPUT PROCESSING O

Point INPUT ALL INPUT PROCESSING O

Direct Out

On, Level INPUT ALL INPUT PROCESSING O

Point INPUT ALL INPUT PROCESSING O

Att O INPUT EQ

INPUT ATT

INPUT PROCESSING O

HPF O INPUT EQ INPUT EQ INPUT PROCESSING O

EQ O INPUT EQ INPUT EQ INPUT PROCESSING O

Dynamics1

Key-In Source INPUT DYNA1 INPUT PROCESSING

Key-In Filter O INPUT DYNAMICS1 INPUT DYNA1 INPUT PROCESSING O

Others O INPUT DYNAMICS1 INPUT DYNA1 INPUT PROCESSING O

Dynamics2

Key-In Source INPUT DYNA2 INPUT PROCESSING

Others O INPUT DYNAMICS2 INPUT DYNA2 INPUT PROCESSING O

To Mix

On O INPUT MIX ON

*2

INPUT MIX ON INPUT FADER/ON

*4

O

Level O INPUT MIX SEND

*2

INPUT MIX SEND INPUT FADER/ON

*4

O

Pan/Balance O INPUT MIX SEND INPUT FADER/ON

*4

O

Pre/Post O

INPUT MIX SEND

*2

INPUT MIX SEND

INPUT PROCESSING O

To Matrix

On O INPUT MATRIX ON

*3

INPUT MATRIX ON INPUT FADER/ON

*4

O

Level O INPUT MATRIX SEND

*3

INPUT MATRIX SEND INPUT FADER/ON

*4

O

Pan/Balance O INPUT MATRIX SEND INPUT FADER/ON

*4

O

Pre/Post O

INPUT MATRIX SEND

*3

INPUT MATRIX SEND

INPUT PROCESSING O

To Stereo/ Mono O INPUT ALL INPUT PROCESSING O

Pan/ Balance O INPUT ALL INPUT FADER/ON O

LCROn O INPUT ALL INPUT PROCESSING O

CSR O INPUT ALL INPUT PROCESSING O

On O INPUT ON INPUT ON INPUT FADER/ON O

Fader O INPUT FADER INPUT FADER INPUT FADER/ON O

Mute Assign O INPUT ALL MUTE GROUP ASSIGN O

DCA Assign O INPUT ALL DCA GROUP ASSIGN O

Cue O

Mute Safe O

Recall Safe O

Fade Time, On O STORE O

Parameter Linked in stereo mode RECALL SAFE USER LEVEL Channel

Library

Name, Icon OUUTPUT NAME OUTPUT NAME O

InsertOn O MIX ALL MIX PROCESSING O

Point O MIX ALL MIX PROCESSING O

Att O

MIX ATT

MIX PROCESSING O

EQ O MIX EQ MIX PROCESSING O

Dynamics1Key-In Source MIX DYNA1 MIX PROCESSING

Others O MIX DYNA1 MIX PROCESSING O

To Matrix

On O MIX to MATRIX ON MIX FADER/ON

*4

O

Level O

*5

MIX to MATRIX SEND MIX FADER/ON

*4

O

Pan/Balance O MIX to MATRIX SEND MIX FADER/ON

*4

O

Pre/Post O

MIX to MATRIX SEND

MIX PROCESSING O

To Stereo/Mono O MIX ALL MIX PROCESSING O

Pan/Balance O MIX ALL MIX FADER/ON O

LCROn O MIX ALL MIX PROCESSING O

CSR O MIX ALL MIX PROCESSING O

On O MIX ON MIX FADER/ON O

Fader O MIX FADER MIX FADER/ON O

From Input

On WITH MIX SEND WITH MIX SEND

*4

Level WITH MIX SEND WITH MIX SEND

*4

Pan WITH MIX SEND WITH MIX SEND

*4

Pre/Post WITH MIX SEND WITH MIX SEND

*4

Mute Assign O MIX ALL MUTE ASSIGN O

Cue O

Mute Safe O

Recall Safe O


Parameter Linked in stereo mode RECALL SAFE USER LEVEL Channel

Library

Name, Icon OUTPUT NAME OUTPUT NAME O

InsertOn O MATRIX ALL MATRIX PROCESSING O

Point O MATRIX ALL MATRIX PROCESSING O

Att O

MATRIX ATT

MATRIX PROCESSING O

EQ O MATRIX EQ MATRIX PROCESSING O

Dynamics1Key-In Source MATRIX DYNA1 MATRIX PROCESSING

Others O MATRIX DYNA1 MATRIX PROCESSING O

Balance O MATRIX ALL MATRIX FADER/ON O

On O MATRIX ON MATRIX FADER/ON O

Fader O MATRIX FADER MATRIX FADER/ON O

From InputFrom MixFrom Ste-reo/Mono

On WITH MATRIX SEND WITH MATRIX SEND

*4

Level WITH MATRIX SEND WITH MATRIX SEND

*4

Pan WITH MATRIX SEND WITH MATRIX SEND

*4

Pre/Post WITH MATRIX SEND WITH MATRIX SEND

*4

Mute Assign O MATRIX ALL MUTE ASSIGN O

Cue O

Mute Safe O

Recall Safe O


Parameter Linked on the STEREO channel RECALL SAFE USER LEVEL Channel

Library

Name, Icon OUTPUT NAME OUTPUT NAME O

InsertOn O STEREO, MONO ALL STEREO, MONO PRO-

CESSING O

Point O STEREO, MONO ALL STEREO, MONO PRO-CESSING O

Att O

STEREO, MONO ATT

STEREO, MONO PRO-CESSING O

EQ O STEREO, MONO EQ STEREO, MONO PROCESSING O

Dynamics1Key-In Source STEREO, MONO

DYNA1STEREO, MONO PRO-CESSING

Others O STEREO, MONO DYNA1


To Matrix

On O STEREO, MONO to MATRIX ON

STEREO, MONO FADER/ON

*4

O

Level O

*5

STEREO, MONO to MATRIX SEND


*4

O

Pan/Balance O STEREO, MONO to MATRIX SEND


*4

O

Pre/Post O

STEREO, MONO to MATRIX SEND


Balance O STEREO, MONO ALL STEREO, MONO FADER/ON O

On O STEREO, MONO ON STEREO, MONO FADER/ON O

Fader O STEREO, MONO FADER STEREO, MONO FADER/ON O

Mute Assign O STEREO, MONO ALL MUTE ASSIGN O

Cue O

Mute Safe O

Recall Safe O


Parameter RECALL SAFE USER LEVEL

Name, Icon DCA ALL DCA MASTER ON

On DCA LEVEL/ON DCA MASTER ON

Fader DCA LEVEL/ON DCA MASTER ON

Fade Time, On STORE

m7cl_mixing_parameter.fm Page 1 Friday, June 19, 2009 11:33AM

Yamaha Pro Audio global web site:http://www.yamahaproaudio.com/

Yamaha Manual Libraryhttp://www.yamaha.co.jp/manual/

U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation© 2009 Yamaha Corporation

WS66170 906POCP1.3-01A0Printed in Japan

supplementary en de fr es it ru - yamaha … supplementary manual explains mainly the functionality...

Documents