supplies selection guide for hplc and electrochemistry systems

Supplies Selection Guide for HPLC and Electrochemistry Systems

Agilent CrossLab HPLC works with WATERS SHIMADZU THERMO SCIENTIFIC AND MORE

For more information

Learn more:www.agilent.com/chem/CrossLabHPLCwww.agilent.com/chem/CrossLabElectrochemistry

Buy online:www.agilent.com/chem/store

U.S. and [email protected]

[email protected]

Asia [email protected]

[email protected]

2013 EDITION

Put Agilent quality supplies to work across your lab

Agilent CrossLab Selection Guide for HPLC & Electrochemistry System

s

CrossLabAgilent

Information, descriptions, and specifications in thispublication are subject to change without notice.© Agilent Technologies, Inc. 2013Printed in Canada May XX, 20135991-1484EN

1

27

42

49

64

65

89

Agilent CrossLab Selection Guide for HPLC & Electrochemistry Systems

Table of Contents

CrossLab Product Introductions

CrossLab Supplies for Shimadzu HPLC Systems

CrossLab Supplies for Waters HPLC Systems

CrossLab Supplies for CTC Analytics HPLC Autosamplers

CrossLab Supplies for pH Meters

CrossLab Vials and Closures

CrossLab Well Plates and Sealing Mats

*Dionex is now a part of Thermo Scientific

92

Agilent designs and manufactures columns to suit mosttechniques for small molecule, biomolecule and syntheticpolymer analysis, allowing you to scale methods fromconventional 5 µm… to “Fast LC” sub-2 µm… to prep.You have access to Agilent’s extensive applicationslibrary for faster method development – plus worldwidetechnical support, speedy problem resolution, our globalinfrastructure, and delivery network.Agilent’s meticulous production oversight ensurescolumn consistency and performance. With more than40 years of experience in producing polymers and silicachemistries, our team is committed to continuouslydeveloping new column advances that make you most productive.

Learn more atwww.agilent.com/chem/sampleprep

Learn more atwww.agilent.com/chem/lccolumns

Agilent Bond Elut SPE, Bond Elut QuEChERS and Captiva Filtration Sample Prep family of productsoffer the widest range of solutions for every level of sample cleanliness to help you increase throughputand increase the quality of your data.

CrossLab Supplies for Dionex HPLC Systems*

Simplify your workflow with Captiva Filtration Family of ProductsMaximize the benefits of Captivawith these additional products

The Agilent LC Columns Family: Choice, control and assured excellent results

1www.agilent.com/chem/CrossLabHPLC


Agilent CrossLab is a growing portfolio of supplies critical to instrument performance and productivity,regardless of the instrument manufacturer. They are backed by our risk-free, compatibility warranty for your confidence, not compromise. In the unlikely event of a problem, we guarantee:

We currently support HPLCs from:

• Waters

• Shimadzu• Thermo/Dionex• CTC Analytics

WATERS SHIMADZU THERMO/DIONEX AND MORE

We currently support pH Meters from:

• Mettler Toledo

• Thermo Scientific• HANNA Instruments

And more to come

Our growing HPLC supplies portfolio includes the following products:

• Autosampler syringes• Capillaries, tubing, and fittings• Detector lamps• Performance Maintenance kits

• Pump supplies

• Sample loops• Valve supplies• Vials and closures• Well plates and sealing mats

Our growing Electrochemistry supplies portfolio includes the following products:

• pH electrodes• pH buffer solutions

Agilent CrossLab HPLC works with

Agilent CrossLab is more than supplies:

• Over 40 years of chromatography expertise • The right supplies for both routine and challenging applications• Hassle-free operations and reproducible results• High-quality products manufactured to Agilent standards• Technical and application support• Dependable worldwide availability and delivery• Convenience of consolidating purchasing• 90-day risk-free money-back guarantee

• 90-day refund on supplies• A technical support consultation• Free instrument repair or service if required

2 Agilent CrossLab HPLC & Electrochemistry Supplies Selection Guide


Tips & ToolsEach time after a replacementof a detector lamp, it isrecommended to perform a wavelength calibration testand an intensity test after warm up.

CrossLab Detector Lamps

Our detector lamps are designed for precisealignment and thermal stabilityAgilent CrossLab lamps are designed and built to be compatible with a wide variety of detectors,including Variable Wavelength Detectors (VWD), Multiple Wavelength Detectors (MWD), and Diode Array Detectors (DAD) or Photodiode Array Detectors (PDA). Each lamp adheres to the tightest specifications for consistent quality and reproducible performance over the lifetime of the lamp. Test equipment is regularly calibrated using optical standards certified by NIST (National Institute of Standards and Technology) or PTB (Physikalisch-Technische Bundesanstalt).

• Manufactured in an ISO 9001 certified environment• Quartz glass bulbs for extended lifetime• Individually tested for light intensity, noise and drift, correct operating voltage, and proper

alignment for low lamp-to-lamp variability• Tight QA/QC with traceability for each lamp throughout every step of the product process• Both deuterium lamps and tungsten lamps available

Deuterium lamps• High output stability and intensity for extended detection capabilities and improved qualification

at trace level• Guaranteed lifetime of 2,000 hours

Tungsten lamps• Offer coverage in the visible wavelength range for high sensitivity detection• Average lifetime range from 1,200 to 5,000 hours depending on operation conditions such as

operation cycles, soft start, and operation voltage

Long-life deuterium lamp, 8005-0705



CrossLab Vials and ClosuresAgilent CrossLab vials and closures are thoroughly tested to ensure the highest level of quality.Additionally, CrossLab vials are designed for use in a wide range of GCs and HPLCs, including thosefrom Bruker (formerly Varian), Dionex (now Thermo Scientific), PerkinElmer, Shimadzu, ThermoScientific, and Waters. They are:

• Manufactured in an ISO 9001 certified facility• Made from First Hydrolytic Type 1 Class A or Class B borosilicate glass, which conforms to US

FDA, USP, and EU Pharmacopeia standards• Protected by proprietary packaging with a crush barrier to reduce vial breakage• Packaged in material that has been tested and selected for cleanliness• Subjected to rigorous end-of-line sampling and quality control procedures to ensure all vials

remain within specifications• Compatible with a wide variety of autosamplers regardless of make and model

Snap top vials with write-on spot, 8010-0025



CrossLab Well Plates and Sealing MatsChoose the cleanest well plates and sealing mats for your autosamplersAdvantages of Agilent CrossLab well plates:

• Made from polypropylene• Free from RNase, DNase, Endotoxins, and human DNA• Chemically resistant to common solvents• Autoclavable (121 °C/20 min)• Alpha-numeric grid• Compatible with pipetting workstations and multi-channel pipettes• Raised rims are available with 0.5 mL and 1.0 mL deep well plates

for efficient sealing and a reduced risk of cross-contaminationduring rigorous vortexing

• Available in 96- or 384-well plate format• 96-well plates range from 0.2 mL to 2 mL• 384-well plates available in 0.1 mL and 0.25 mL• Stackable

Advantages of Agilent CrossLab sealing mats:

• Protect well contents during storage• Free from RNase, DNase, Endotoxins, and human DNA• Highly flexible for a tight seal and exact fit• Insets in every well eliminate the need for glue during connection• Pierceable with pipette tips (0.5 mL and 1.0 mL sealing mats)• Prevent solvent evaporation• Made from thermoplastic elastomer (TPE) or

ethylene-vinyl acetate (EVA)• Compatible with common solvents

96-well plate,8010-0534

0 1 2 3 4 5 6 7 8 9 min

0

5000000

10000000

15000000

20000000

Cleanliness of well plates and sealing mats: Agilent CrossLab vs. the competition

Blank in Agilent CrossLab 1.0 mL 96-well plate with matching sealing mat The chemical extraction experimentsdemonstrate the superior cleanlinessof the Agilent CrossLab well platesand sealing mats compared to thecompetition, making them ideal for LC/MS applications.

Blank in competitor A 1.0 mL 96-well plate

Blank in competitor B 1.0 mL 96-well plate with matching sealing mat

Reagent blank

System blank

LC/MS ESI positive chromatogram comparison. Reagent blank: 1:1 Acetonitrile/H2O with 0.1% formic acid

Tota

l Ion C

urre

nt (T

IC)



Agilent CrossLab Autosampler Syringes and Manual SyringesAgilent's CrossLab HPLC syringe portfolio contains a broad selection of syringe styles and volumes to provide what you need for accurate andeffective sampling. From autosampler syringes in both large or small volume, to syringes for pump priming, CrossLab syringes meet all form, fit,and function criteria to support your HPLC systems.

• Accuracy to within ±1% of nominal volume with a precision of 1% at 80% of the total volume• A chemically inert fluid path of stainless steel, borosilicate Type I glass, or PTFE • Robust design for long lifetime

Point style

Needle gauge

Termination

Barrel with graduations

Flange

Fitted plunger

Agilent CrossLab Syringe Features



Syringe terminations at the end of the syringe barrel function as the interface between the syringe and its mating connection, such as the needle.Terminations are offered in a number of different needle and connection configurations to accommodate a broad range of applications.

Fixed Needle

• Economical option for injections• Preferred for applications requiring trace level samples• Needle is cemented into the glass syringe barrel at a point corresponding to the zero

graduation mark• Dead volume is limited to the needle’s internal volume• Not autoclavable• Recommended for use where probability of needle bending is minimal

Removable Needle

• Versatile option for injections• Needle seats precisely at the zero graduation mark• Needle can be replaced if damaged or clogged• Allows for a removable needle without increasing dead volume• Ideal for when there is a risk of needle clogging• Autoclavable when disassembled (repeated autoclaving shortens syringe life)

PTFE Luer Lock

• PTFE, male Luer taper with nickel-plated brass locking hub for use with Kel-F needles or metal hub needles, and universal connectors

• Autoclavable when disassembled, except on 25 mL or greater syringes (repeated autoclaving shortens syringe life)

Chem

• ¼-28 UNF male fitting thread connection• Used for low-volume applications where system dead volume must be minimized• Can be screwed directly into injection valves



Note: Most manual HPLC injection valves are designedto be used with a 22-gauge, or a 22s-gauge bluntneedle point style 3.Needle Gauge 22 Needle Point Style 3

Gauge Selection Chart

Nominal OD Nominal ID Wall Thickness VolumeGauge in mm in mm in mm µL/in22s* 0.0280-0.0285 0.718 0.0055-0.0077 0.168 0.022 0.55 0.56322 0.0280-0.0285 0.718 0.0155-0.0170 0.413 0.012 0.30 3.403

*Note: 22s needles have a smaller inner diameter and a thicker wall for better durability.

Tips & Tools

Tips & Tools

Replace syringe if dirt is noticeable, syringes cannot be cleaned, or plunger does not slide easily.

Follow manufacturer's recommendation for syringe cleaning and regularly inspect syringe barrel for sample build-up and needle tip for wear.



Autosampler Routine MaintenanceRoutine autosampler maintenance should be performed on a regular basis to keep your HPLC systemperforming at its optimum level. You can perform all maintenance procedures at once or as needed.Some parts may need to be replaced more often than others depending upon your application andsolvent preparation procedures.

Regular autosampler maintenance helps lower operating costs and generate precise results with theutmost confidence. By following a regular maintenance routine, you can count on maximum uptimeduring the life of your autosampler.

Waters Autosampler Routine Maintenance Procedures• Replace the metering syringe• Rebuild the injector seal pack and replace the needle• Rebuild the high-pressure motorized valves• Replace the in-line filter insert• Adjust the seal pack seal valves

Waters Autosampler Routine Maintenance and Troubleshooting

Symptom Cause SolutionPoor injection reproducibility Low sample level in vials Confirm sample level in the vials is at minimum a quarter full

Worn metering syringe Replace the metering syringe assemblyWorn high-pressure motorized valve seals Rebuild the high-pressure motorized valvesLeaking waste valve Replace the waste valveWorn injector seals Rebuild the injector seal pack, replace the needle, and adjust

the seal pack seal valvesLeaking syringe Worn metering syringe Replace the metering syringe assemblySample carryover Needlewash solvent exhausted Refill the needlewash solvent reservoir

Dirty needlewash seals Rebuild the seal pack and adjust seal pack seal valvesFaulty needlewash valve Replace the needlewash valve

Sample vials filling during injection cycle Worn high-pressure motorized valve seal Rebuild the high-pressure motorized valvesLow peak response Low sample level in vials Confirm sample level in the vials is at minimum a quarter full

Worn metering syringe Replace the metering syringe assemblyWorn high-pressure motorized valve seals Rebuild the high-pressure motorized valvesLeaking waste valve Replace the waste valveWorn injector seals Rebuild the injector seal pack, replace the needle, and adjust

the seal pack seal valves



Shimadzu Autosampler Routine Maintenance Procedures• Replace the sample metering drive plunger seal• Replace the sample needle• Replace the needle seat seal• If equipped, replace the rinse port septum• If equipped, clean the high-pressure valve and replace the high-pressure valve rotor seal• If equipped, clean the low-pressure valve and replace the low-pressure valve rotor seal• If equipped, clean the injection valve and replace the injection valve rotor seal• Adjust the needle if necessary

Shimadzu Autosampler Routine Maintenance and Troubleshooting


Worn metering seal Replace the metering plunger sealDamaged metering plunger Replace the metering plungerWorn high-pressure valve seals Rebuild the high-pressure valveWorn low-pressure valve seals Rebuild the low-pressure valveLeaking waste valve Replace the waste valveDamaged sample needle Replace the sample needle and needle seat seal

Sample carryover Needlewash solvent exhausted Refill the needlewash solvent reservoirDirty needlewash seals Rebuild the seal pack and adjust seal pack seal valuesContaminated rinse port Clean and flush the rinse port

Low peak response Low sample level in vials Confirm sample level in the vials is at minimum a quarter fullWorn metering plunger seal Replace the metering plunger sealDamaged metering plunger Replace the metering plungerWorn high-pressure valve seals Rebuild the high-pressure valveLeaking waste valve Replace the waste valveDamaged sample needle Replace the sample needle and needle seat seal



Dionex* Autosampler Routine Maintenance Procedures• Replace the sample metering syringe• Replace the sample needle• Replace the needle seat seal• If equipped, clean the injection valve and replace the injection valve rotor seal• Replace the buffer tubing• Replace the capillary tubing• Fill the syringe reservoir• Adjust the needle if necessary


Dionex Autosampler Routine Maintenance and Troubleshooting


Worn metering syringe seal Replace the metering syringeWorn syringe valve Replace the syringe valveWorn injection valve seal Rebuild the injection valveLeaking waste valve Replace the waste valveLeaking fittings Check all the fittings for leaksDamaged sample needle Replace the sample needle and needle seat seal

Sample carryover Needlewash solvent exhausted Refill the needlewash solvent reservoirDirty needlewash seals Rebuild the seal pack and adjust seal pack seal valvesContaminated rinse port Clean and flush the rinse port

Leaking syringe Damaged syringe Replace the syringeWorn syringe valve Check for leaks and replace if necessary

Low peak response Low sample level in vials Confirm sample level in the vials is at minimum a quarter fullWorn syringe valve Replace the metering syringeDamaged syringe valve Check the syringe valve for leaks and replace if necessaryWorn injector valve seal Rebuild the injection valveLeaking waste valve Replace the waste valveLeaking fittings Check all the fittings for leaksDamaged sample needle Replace the sample needle and needle seat seal



CrossLab Pump SuppliesProper pump maintenance helps ensure precise,consistent results and lower operating costsRegular pump maintenance helps lower operating costs and ensure precise and consistent results. By following a regular maintenance routine, you can count on maximum uptime, steady and accuratesolvent flow, pressure stability throughout the life of a pump, and keep your HPLC system in itsoptimum condition.

CrossLab Plungers and SealsPlungers (or pistons) and seals are two of the most important components of a pump. All AgilentCrossLab plungers combined with seals undergo extensive testing under temperature stress withcommon HPLC solvents for reproducible results.

Plungers:• Available in sapphire or ceramic• Sapphire plungers are made from high purity monocrystalline sapphire for optimal concentricity

and resistance to wear• Are meticulously cut and polished for great durability and long life

Seals:• Manufactured from ultra-high-molecular-weight polyethylene (UHMWPE) or graphite-filled

polytetrafluoroethylene (GFP)• Designed to provide precise sealing around the plungers• Engineered to deliver top performance over highly dynamic flow and pressure ranges

Tips & Tools

Tips & Tools

Plungers (or pistons) should beexchanged on a regular basis incombination with seals to maintainthe best sealing surface anddurability for optimal instrumentperformance.

Depending on your applications andsolvent preparation protocols, someparts may need to be replaced moreoften than the others.

Sapphire plunger assembly, 8005-0538

Plunger seal replacement kit, 8005-0541

Face seals replacement kit, 8005-0536



CrossLab Check ValvesCheck valves are key components for a pump, and their lifetime is often related to the solvents used. A defective valve can lead to pressure fluctuation, inconsistent flow, and a noisy baseline.

Agilent CrossLab check valves and assembly components:

• Made to operate at different pressures (up to 16,000 psi, or 1,100 bar) per specifications from the Original Equipment Manufacturers (OEMs)

• Made from a variety of materials, such as stainless steel, titanium, ceramic, and PEEK, depending on OEM specifications

• Carefully assembled to ensure reliability and consistent performance• Each ruby or ceramic ball and sapphire or ceramic seat is manufactured under extremely tight

tolerances to ensure proper sealing within the operating pressure range

Don't forget to check your check valve regularly and replace check valve cartridges to ensure proper pump operations.

Tips & Tools



HPLC Pump Routine MaintenanceRoutine pump maintenance should be performed on a regular basis to keep your HPLC systemperforming at its optimum level. You can perform all maintenance procedures at once or as needed.Some parts may need to be replaced more often than others depending upon your application andsolvent preparation procedures.

Regular pump maintenance helps lower operating costs and generate precise results with the utmostconfidence. By following a regular maintenance routine, you can count on maximum uptime and asteady, accurate solvent flow for the life of the pump.

Waters Pump Routine Maintenance Procedures• Replace the seals and plungers (or pistons)• Replace the in-line filter insert• Replace the check valve cartridges• Replace the seal wash seals and tube seals• Replace the solvent inlet frits


Tips & ToolsPump seals should be replacedwhen there are leaks on the bottomof the pump head, when retentiontimes are inconsistent, or when the pressure ripple is unstable.

Waters Pump Routine Maintenance Procedures

Symptom Cause SolutionPressure ripple unstable Dirty check valve cartridge(s) Run static leak test to verify and exchange the check valve

cartridge(s)Leak on pump head Run static leak test to verify and exchange the in-line filter

insert and plunger (or piston) sealsGradient performance problemsIntermittent pressure fluctuations

Blocked solvent filter(s) Change the solvent filter(s)

A pressure drop of greater than 10 bar (150 psi) acrossthe in-line filter (5 mL/min H2O during wet priming)

Dirty in-line filter Exchange the in-line filter insert

Leaks at lower pump head sideUnstable retention timePressure ripple unstable

High seal wear Run leak test to verify and exchange the pump seals andin-line filter insert

Seal lifetime shorter than normally expected Scratch on plunger Check plungers while changing the sealsExchange the plungers if damaged or scratched

Loss of wash solvent Leaky wash seals Exchange the wash seals



Shimadzu Pump Routine Maintenance Procedures• Replace the seals and plungers (or pistons)• Replace the in-line filter cartridge• Replace the check valve cartridges• Replace the seal wash seals• Replace the solvent inlet frits

Shimadzu Pump Routine Maintenance and Troubleshooting

Symptom Cause SolutionPressure ripple unstable Dirty check valve cartridge(s) Run Pump Pressure test to verify and exchange the check

valve cartridge(s)Leak on pump head Run Pump Pressure test to verify and exchange the in-line

filter insert and plunger (or piston) sealCheck inlet and outlet fittings for leaksTighten all fittings and re-run the Pump Pressure test

Gradient performance problemsIntermittent pressure fluctuations




Leaks at lower pump head sideUnstable retention timePressure ripple unstableBroad peaks or peak tailing

High seal wear Run Pump Pressure test to verify and exchange the pumpseals and in-line filter cartridge


Loss of wash solvent Leaky wash seals Exchange the wash seals

Plunger seal, 8001-0502



Dionex* Pump Routine Maintenance Procedures• Replace the purge valve cap seal• Replace the seals, seal rings, and plungers (or pistons)• Replace the in-line filter cartridge• Replace the check valve cartridges• Replace the seal wash seals and seal wash tubing• Replace the mixing chamber gasket• Replace the solvent inlet filter frits


Dionex Pump Routine Maintenance and Troubleshooting

Symptom Cause SolutionPressure ripple unstable Dirty check valve cartridge(s) Run Pump Pressure test to verify and exchange the check

valve cartridge(s)Leak on pump head Run Pump Pressure test to verify and exchange the in-line

filter insert and plunger (or piston) sealCheck inlet and outlet fittings for leaksTighten all fittings and re-run the Pump Pressure test

Gradient performance problems, Intermittent pressure fluctuations




Leaks at lower pump head sideUnstable retention timePressure ripple unstableBroad peaks or peak tailing

High seal wear Run Pump Pressure test to verify and exchange the pumpseals and in-line filter cartridge


Loss of wash solvent Leaky wash seals Exchange the wash seals and seal wash tubing

Vespel rotor seal, 8002-0602



CrossLab Valve Supplies Agilent CrossLab valve supplies work seamlessly with your HPLC systems for reliable, accurate, and reproducible results.

Rotor seals: A variety of materials for a wide range of applicationsA rotor seal is a polymeric disk that creates a high-pressure seal against the stator or stator face seal.A variety of materials are available for different applications. It is important to replace rotor seals on a routine basis to prevent excessive wear. The recommended replacement interval for most rotor seals is once per year for preventive maintenance or as needed depending on stresses imposed by specific applications.

Rotor, 6-port valve, 8001-0601

Recommended pH levels for rotor seal materials

pH Range 0-7 7-10 10-14VespelPEEKTefzel

Tips & Tools

For any solution above pH 10, a PEEK rotor seal is recommended.

Tips & Tools

PEEK rotor seals are incompatiblewith concentrated nitric and sulfuric acids.

Looking for electrochemistry supplies?Please see page 92.

The Agilent CrossLab Electrochemistry portfolio includes a variety of electrodes and pH buffersdesigned for pH meters from Mettler Toledo, Thermo Scientific, and HANNA Instruments.

• Vespel: Vespel is a polyimide with low wear and high chemical resistance. Recommended for use with solutions under pH 10 because more basic solutions dissolve Vespel over time and damage the rotor seal

• PEEK (Polyetheretherketone): PEEK offers high resistance, versatility, and applicability for the entire pH range between 0 and 14

• Tefzel: Recommended for use in applications where PEEK cannot be used, such as higherconcentrations of methylene chloride or dimethyl sulfoxide (DMSO)



Stators• Available in 316 stainless steel, PEEK, and ceramic depending on the specifications of OEMs• Typically require replacement only if the ports or sealing surfaces become damaged, which can

be prevented by using proper injection needles

Sample Loops

• Have burr-free and square-cut ends to ensure a flush connection to valve ports• Actual volumes might differ due to tolerance of metal tubing bore• Accuracy of large metal loops (1.0 mm, 0.040 in bore) is ± 14%, intermediate loops (0.5 mm,

0.020 in bore) is ± 21%, and small loops (0.2 mm, 0.007 in bore) is ± 65%

• Alternative to stainless steel sample loops• Clean, straight cuts for easy valve installation and low dead volume connections• Inert to almost all organic solvents and biocompatible• Actual volumes might differ due to tolerance of metal tubing bore• Accuracy of large PEEK loops (0.8 mm, 0.030 in bore) is ± 5%, intermediate loops

(0.5 mm, 0.020 in bore) is ± 10%, and small loops (0.2 mm, 0.007 in bore) is ± 30%• Wall thickness, temperature, concentration of organic solvent, and solvent exposure time

affect the durability of PEEK tubing

Tips & ToolsConcentrated nitric acid and sulfuricacid weaken PEEK tubing whiletetrahydrofuran (THF), methylenechloride, and DMSO cause swelling.

Tips & ToolsSince both standards and unknownsare usually analyzed using the samesample loops, knowledge of theactual, accurate volume is rarelyneeded. If the sample loop volumemust be known, it is best tocalibrate the loop in place on thevalve so the flow passages in thevalve are taken into account.

PEEK Sample Loops

Stainless Steel Sample Loops:

Stator, 6-port valve, 8001-0604



515 pump PM kit, 8005-0913

2960/2965 PM kit, 8005-0915

PM kits make it easier to keep your instrumentsrunning at peak performance Many instrument failures are not caused by functional breakdowns, but by a lack of performancemaintenance. As suggested by a recent study, a regular performance maintenance program canreduce instrument failure rates up to 25%, and is critical to ensure optimal overall system operations.

The Effect of Performance Maintenance

Numb

er of

Insta

lled I

nstru

ment

s

Agilent CrossLab PM kits contain the normal wear parts, tools for disassembly/reassembly, and instructions necessary to keep your systems operating at peak performance. The kits provide a convenient, cost-effective way to make sure your instruments are properly maintained. Each kit contains all the parts you need to:

CrossLab Performance Maintenance(PM) Kits

Time

Improved performancemaintenance regimeimplemented on site

Predicted failurerate extrapolation

Up to 25%reductionin failures

Failu

re

Failures

• Boost system efficiency and reliability• Reduce unplanned downtime and repair costs• Increase accuracy by enhancing precision and sensitivity • Comply with regulatory requirements, or meet quality accreditation standards• Extend instrument life • Eliminate individual part ordering• PM kits available for pumps, valves, autosamplers, and HPLC systems



General HPLC Supplies

CrossLab HPLC Capillaries and Tubing

Your link to analytical successAgilent CrossLab offers a range of capillaries and tubing made from stainless steel and PEEK. Used incombination with the right fittings, they are ideal for HPLC system plumbing, providing an inert surface,tight, leak-free connections, and zero dead volumes.

Stainless steel capillaries• Made of ultra-clean stainless steel tubing • Ideal for most standard applications, and the best choice for reliable high-pressure sealing• Smooth inner surface for the lowest backpressure• Precision cutting for burr-free, square-cut ends without inner-diameter distortion• Both ends accept standard fittings• Predefined lengths for specific path locations to avoid peak broadening• Individually tested to ensure reproducibility• Available in pre-swaged and non pre-swaged

PEEK tubing• Flexible and easy to cut to desired lengths• Ideal for frequently changed connections• Resists mechanical and solvent damage, even at high temperatures• Biocompatible and inert to almost all organic solvents• A durable alternative to stainless steel connections• Accepts both stainless steel and PEEK fittings

Tips & ToolsAlways use the smallest capillaryinternal diameter and the shortestlength to keep sample dispersion as low as possible.

CrossLab capillary, stainless steel, 8005-0825

ETFE tubing for use between the inlet blockand the check valve, 8001-0807

CrossLab capillary and fitting kit, 8002-0817



CrossLab Fittings

The right HPLC fittings make the best connectionsTo ensure leak-free connections, and to prevent the loss of peak shape and resolution, always use the recommended fitting style for columns, valves and unions.

With Agilent CrossLab fittings, you get the confidence and choice that come with:

• Robust design for long life and smooth, leak-free operation• Stainless steel nuts and ferrules for high-pressure systems• Polymer fittings for biocompatible applicationsBlind nut, FS-8 biocompatible, 8002-0802

Flangeless nut, M6, 8001-0813



CrossLab HPLC In-Line Filters

Help stop time-wasting blockagesColumn inlet frit contamination can increase backpressure and reduce efficiency. Microbore columnblockages are of particular concern, due to the frit’s small diameter.

To help prevent time-wasting contamination and blockages, the Agilent CrossLab portfolio offers twotypes of HPLC filters made from clean, high-quality stainless steel parts:

• In-line solvent filters, installed between the HPLC pump and injector, prevent blockages byremoving particles from solvents before they reach the injector

• Column inlet filters, positioned immediately before an HPLC column, remove particles from boththe injection system and sample

Stainless steel in-line filter, 8001-0808

Filter frit for titanium in-line filter, 2 µL, 8002-0806



CrossLab pH ElectrodesAgilent CrossLab pH electrodes contain various selections to meet different application requirements.The portfolio is supported by uncompromising construction, materials, and quality control for ease-of-use, durability, and accuracy.

• Quick response and accurate results due to a unique reference system assured by proprietarymaterials and manufacturing process

• Made from multi-layered composite materials for extra durability compared to the traditional single-layer breathable membrane

• Built-in barrier for protecting glass bubble against breakage

• Annular fiber polymer materials being leveraged for some electrode liquid junctions to mitigateclogging and sample contamination

• Universal connections for easy interchange with a wide range of popular benchtop meters

• Compatible with pH meters from Mettler Toledo, Thermo Scientific, and HANNA Instruments

Non-refillable pH electrode with glass body, 8010-0973

Non-refillable pH combination electrode with ABS body, 8010-0975

pH combination electrode, 8010-0986



Troubleshooting Guide for HPLC SystemsThe at-a-glance tables can help you pinpoint and solve the most common problems for your HPLC systems and ensure maximum instrumentuptime and productivity.

(Continued)

HPLC Troubleshooting

Symptom Type Possible Cause SolutionBaseline disturbance at void time

Positive/negative – Difference in refractive index of injection solvent

Use mobile phase for sample solvent

Detector leaks Plugged inlet frit Replace seals/gasketsDrifting baseline Positive direction – Contaminant buildup/elution Flush column, clean up sample, use pure solvents

Positive/negative – Difference in refractive index of injection solvent

Use mobile phase for sample solvent

Negative direction (gradient) – Absorbance of "A" mobile phase solvent

Use non-absorbing or HPLC-grade or better solvent

Positive direction (gradient) – Absorbance of "B" mobile phase solvent

Use non-absorbing or HPLC-grade or better solvent

Random – Temperature changes Insulate column and tubingRandom – Temperature changes Thermostat column and tubingWavy or undulating – Temperature changes in room Monitor room temperature and control

Ghost peaks Peaks from previous injection Flush column to remove contaminantsContamination Sample cleanup or pre-fractionationUnknown interferences in samples Sample cleanup or pre-fractionationIon-pair – Upset equilibrium Prepare sample in actual mobile phase

to minimize disturbancePeptide mapping – Oxidation of TFA Prepare fresh daily; use anti-oxidantReversed-phase – Contaminated water Check suitability of water by running different amount

through reversed-phase column and measure peakheight with elution; use HPLC grade solvents

Spikes – Bubbles in solvent De-gas solvents



High column backpressure Column blockage, adsorbed sample Better sample cleanup; use guard columnMobile phase viscosity too high Use lower viscosity solvents or higher temperatureParticle size too small Use larger dp packingPlugged inlet frit Replace columnPlugged inlet frit Reverse solvent flow

Leaks Subtle – White powder at fitting/loose fitting Tighten fittings, cut tubing, or replace ferrulesLeaks, injection valve Catastrophic – Worn valve rotor Replace rotor in valveLeaks, column or other fittings

Catastrophic – Loose fittings Tighten or replace fittings

Leak, pump Catastrophic – Pump seal failure Replace pump sealNegative peaks RI detector – solute refractive index less than solvent No problem; reverse polarity to make positive

UV detector – solute absorbance less than mobile phase Use mobile phase with lower UV absorbance; do not recycle solvent too long

Noisy baseline Random – Contaminant buildup Flush column; clean up sample; use HPLC-grade solventContinuous – Detector lamp problem Replace detector lampOccasional – External electrical interference Use voltage stabilizer for LC system

Peak doubling Sample volume too large Reduce the volume e.g. by half and re-injectInjection solvent too strong Use weaker injection solvent or mobile phaseBlocked frit Replace and use 0.5 µm porosity in-line filterColumn void or channeling Replace column; for some columns,

fill in void with packingUnswept injector flowpath Replace injector rotorVoid at head of column Replace column, top off column with packingColumn overloaded with sample Use higher capacity stationary phase

Increase column diameterDecrease sample size

Single peak – interfering components Sample cleanup; pre-fractionation

Symptom Type Possible Cause Solution


(Continued)



Peak tailing Beginning of peak doubling See "peak doubling"



Unswept dead volumes Minimize number of connectionsEnsure injector seal is tightEnsure fittings are properly seated

Basic compounds – Silanol interactions Choose endcapped bonded phaseSwitch to polymeric phase

Basic substances – Silanol interactions Use stronger mobile phase or add competing base (e.g. TMA)

Silica-based – Column degradation Use specialty column; polymeric column or stericallyprotected

Peaks are broad Injection volume too large Decrease solvent strength of injection solvent to focus solute

Peak dispersion in injector valve Introduce air bubble in front/back of sample to decrease dispersion

Sampling rate of data system too slow Increase frequency of samplingSlow detector time constant Adjust time constant to match peak widthMobile phase viscosity too high Increase column temperatureDetector cell volume too large Use smallest possible cell volume with no heat

exchanger in systemInjector volume too large Decrease injection volumeLong retention times Use gradient elution or stronger mobile phase

Pressure fluctuation Leaky check valve Replace check valvePump seal leaks Replace pump sealsBuildup of particulates Filter sample; in-line filter; filter mobile phase

Pressure increasing Buildup of particulates Filter sample; in-line filter; filter mobile phaseWater/organic systems – buffer precipitation Test buffer-organic mixtures; ensure compatibility

Retention beyond totalpermeation volume

Size exclusion – specific interactions Add mobile phase modifiers or change solvent

(Continued)





First few sample injections – Absorption of sample in loop or column

Condition loop/column with concentrated sample

Autosampler flow lines blocked Check flow and make sure there are no blockagesInjector sample loop underfilled Make sure that loop is overfilled with sampleSample-related losses during preparation Use internal standard during sample prep;

optimize sample prep methodSlow column equilibrationtimes (ion-pairing)

Equilibration time slow for long-chain ion-pairing reagents Use shorter alkyl chain ion-pair reagent

Retention times changing Column temperature varying Thermostat column; insulate column; ensure lab temperature constant

Equilibration time insufficient with gradient run or changes in isocratic mobile phase

Make sure at least 10 column volumes pass throughcolumn after solvent change or gradient conclusion

Selective evaporation of mobile phase component Less vigorous helium sparging; keep solvent reservoirscovered; prepare fresh mobile phase

Buffer capacity insufficient Use >20 mM concentration of bufferInconsistent on-line mobile phase mixing Ensure gradient system delivering constant composition;

check vs. manual prep of mobile phaseContamination buildup Occasionally flush column with strong solvent

to remove contaminantsFirst few injections – Adsorption on active sites Condition column by initial injection of

concentrated sampleRetention timesdecreasing

Flow rate increasing Check pump to make sure correct; if not, resetColumn overloaded with sample Decrease sample sizeLoss of bonded stationary phase Keep mobile phase pH between 2 and 8.5

Retention times increasing Flow rate is slowing Fix leaks in liquid lines, replace pump seals, check for pump cavitation or air bubbles

Active sites on silica packing Use mobile phase modifierLoss of bonded stationary phase Keep mobile phase pH between 2 and 8.5Mobile phase composition changing Make sure mobile phase container is coveredActive sites on silica packing Add competing base to mobile phaseActive sites on silica packing Use higher coverage packing for stationary phase

Sensitivity problem Peaks are outside of linear range of detector Dilute/concentrate to bring into linear region



The cross references to the original equipment manufacturer (OEM) part numbers listed here serve as a recommendation that the Agilent CrossLab products are viablealternatives to OEM products. CrossLab products are compatible with the corresponding OEM instruments, although in some cases, the CrossLab products may have slightlydifferent designs as compared to the OEM counterparts. All CrossLab supplies are backed by Agilent's 90-day money-back warranty.

CrossLab Supplies for Waters HPLC SystemsDetector Lamps, 1/pk

Model Description

Similar toOEMPart No.

AgilentCrossLabPart No.

2996 Photodiode Array Detector*996 Photodiode Array DetectorACQUITY UPLC 2996 Photodiode Array Detector

Long-life deuterium lamp, 2,000 hours WAT052586 8005-0705

2487 Dual Wavelength Absorbance Detector2488 Multichannel Absorbance DetectorACQUITY TUV DetectorUPLC TUV Detector

Long-life deuterium lamp, 2,000 hours WAS081142 8005-0704

486 Tunable UV/Visible Absorbance DetectorLC Module 1

Long-life deuterium lamp, 2,000 hours 700000356WAT052666

8005-0702

*Not for use with ACQUITY H-Class detectors

Long-life deuterium lamp, 8005-0702Long-life deuterium lamp, 8005-0704Long-life deuterium lamp, 8005-0705




(Continued)

Autosampler Syringes, 1/pk

ModelVolume

(µL) Description

Needle Gauge/Length (mm)/

Tip


AgilentCrossLabSyringe

AgilentCrossLab Replacement Needle


AgilentCrossLab Replacement Plunger

2777 CompactSample Manager2777 SampleManager

10 Fixed needle 22s/51/3 430000859 8010-0445* 700002212 8010-0457,10/pk

25 Fixed needle,gas tight

22s/51/3 430000861 8010-0441 700002213 8010-0458,10/pk


22s/51/3 430000864 8010-0442* 700002214 8010-0459,10/pk

Fixed needle,gas tight

22/51/3 430000863 8010-0446* 700002214 8010-0459,10/pk


22/51/3 430000865 8010-0467 700002215 8010-0456,10/pk


22/51/3 430000866 8010-0468 700002216 8010-0460,10/pk

1,000 Fixed needle,gas tight

22/51/3 430000867 8010-0443 700002217 8010-0455,10/pk

2,500 Fixed needle,gas tight

22/51/3 430000868 8010-0444 430000868 8010-0448,1/pk

510 HPLC Pump515 HPLC Pump600 MultiSolventDelivery SystemCapLC SystemCapLC XE System

10000 Luer Lock No needle WAT025559 8005-0414

*Barrel od is 6.7 mm. All other 10, 25, and, 100 µL syringes have 7.9 mm od.

Autosampler syringe, 100 µL fixed needle, 8010-0442




CrossLab syringe, gas tight, 8005-0417

CrossLab syringe needle, 22s/51/3, 8005-0418

CrossLab syringe, PTFE-tipped plunger, 25 µL, 8005-0420

600 MultiSolventDelivery SystemRheodyne Injector

25 Removableneedle, gas tight

22s/51/3 WAT033381 8005-0416 8005-0422

2690 SeparationsModule2690D DissolutionSeparationsModule2695 SeparationsModule2695D DissolutionSeparationsModule2790 SeparationsModule2795 SeparationsModuleLC Module 1717/717plusAutosampler

25 Chem (1/4-28UNF screwthreads), gas tight

No needle WAT077343 8005-0420

250 Chem (1/4-28screw threadsUNF), gas tight

No needle WAT073109 8005-0419

Rheodyne Injector 100 Removableneedle, gas tight

22s/51/3 WAT033383 8005-0417 8005-0418,6/pk

8005-0423

ModelVolume

(µL) Description

Needle Gauge/Length (mm)/

Tip



AgilentCrossLab Replacement Needle


AgilentCrossLab Replacement Plunger






(Continued)



Pump Supplies

Model Description Unit



Plungers and Seals2690 Separations Module2690D Dissolution Separations Module2695 Separations Module2695D Dissolution Separations Module2790 Separations Module2795 Separations Module2796 Bioseparations Module

Sapphire plunger assembly, standard 1/pk WAT270959 8005-0538

2690 Separations Module2690D Dissolution Separations Module2695 Separations Module2695D Dissolution Separations Module

Plunger seals, clear 2/pk 700001326 8005-0514

2690 Separations Module2690D Dissolution Separations Module2695 Separations Module2695D Dissolution Separations Module2790 Separations Module2795 Separations ModuleAlliance GPC/V 2000 Systems

Plunger seal replacement kit, standard, yellow 2/pk WAT270938 8005-0535

2690 Separations Module2690D Dissolution Separations Module2695 Separations Module2695D Dissolution Separations Module2790 Separations Module2795 Separations Module

Plunger seal replacement kit, black 2/pk WAT271066 8005-0541



Face seals replacement kit, 8005-0536

Seal wash face seal kit, 8005-0539

(Continued)

The cross references to the original equipment manufacturer (OEM) partnumbers listed here serve as a recommendation that the Agilent CrossLabproducts are viable alternatives to OEM products. CrossLab products arecompatible with the corresponding OEM instruments, although in some cases,the CrossLab products may have slightly different designs as compared to theOEM counterparts. All CrossLab supplies are backed by Agilent's 90-daymoney-back warranty.

2690 Separations Module2690D Dissolution Separations Module2695 Separations Module2695D DissolutionSeparations Module2790 Separations Module2795 Separations ModuleAlliance GPC/V 2000 Systems

Face seals replacement kit 4/pk WAT270939 8005-0536


Seal wash face seal kit 1/pk WAT271017 8005-0539

2796 Bioseparations Module Seal wash, plunger seal 4/pk 700002258 8005-05162796 Bioseparations Module Plunger seal, standard 2/pk 700002257 8005-0515

Pump Supplies




Plungers and Seals


Seal wash plunger seal replacement kit 2/pk WAT271018 8005-0540

510 HPLC Pump600 MultiSolvent Delivery System610 PowerLine Isocratic PumpLC Module 1

Sapphire plunger 1/pk WAT025656 8005-0527Oriented sapphire plunger 1/pk WAT069511 8005-0533



Check valve cartridge replacement kit, 8005-0537


Pump Supplies




Check Valves and Cartridges

510 HPLC Pump515 HPLC Pump600 MultiSolvent Delivery SystemLC Module 1

Plunger seal, graphite-filled PTFE (GFP), black 1/pk WAT026613 8005-0529

510 HPLC Pump515 HPLC Pump600 MultiSolvent Delivery System610 PowerLine Isocratic PumpLC Module 1

Plunger seal, black, 225 µL 1/pk WAT026644 8005-0530

616 LC System626 LC System

Sapphire plunger 1/pk WAT031788 8005-0531

1515 HPLC Pump1525 HPLC Pump515 HPLC Pump

Sapphire plunger assembly 1/pk WAS207069 8005-0523

1515 HPLC Pump1525 HPLC Pump510 HPLC Pump515 HPLC Pump600 MultiSolvent Delivery System610 PowerLine Isocratic PumpLC Module 1

Plunger seal, clear 1/pk WAT022934 8005-0524Plunger seal, clear 4/pk WAT022946 8005-0525


Check valve cartridge replacement kit 2/pk WAT270941 8005-0537

Plungers and Seals

(Continued)

The cross references to the original equipment manufacturer (OEM) partnumbers listed here serve as a recommendation that the Agilent CrossLabproducts are viable alternatives to OEM products. CrossLab products arecompatible with the corresponding OEM instruments, although in somecases, the CrossLab products may have slightly different designs ascompared to the OEM counterparts. All CrossLab supplies are backed byAgilent's 90-day money-back warranty.




1515 HPLC Pump1525 HPLC Pump2695 Separations Module2695D Dissolution Separations Module2795 Separations Module510 HPLC Pump515 HPLC Pump600 MultiSolvent Delivery System610 PowerLine Isocratic PumpLC Module 1

Check valve cartridge 2/pk 700000254 8005-0513

1525 HPLC Pump2695 Separations Module2695D Dissolution Separations Module2795 Separations Module515 HPLC Pump600 MultiSolvent Delivery System

Check valve cartridge 1/pk 700002399 8005-0508

1515 HPLC Pump1525 HPLC Pump515 HPLC Pump600 MultiSolvent Delivery SystemLC Module 1

Cartridge check valve system 2/pk 700000253 8005-0512


Outlet check valve rebuild kit, 225 µL 2/pk WAT026014 8005-0528

626 LC System Check valve cartridge 1/pk WAT024120 8005-0526Check Valves and CartridgesModel Description Unit



Pump Supplies



Detector Supplies




2996 Photodiode Array Detector996 Photodiode Array Detector

Cell gasket 2/pk WAT057924 8005-0532


Looking for Performance Maintenance Kits for Rheodyne Valves?See page 38.

Vespel rotor seal, for Rheodyne7725(i), 8005-0604

Tefzel rotor seal, 8005-0603

Valve Replacement Parts, 1/pk

Model Description

Similar toOEM Part No.


2767/2747 Sample ManagerColumn/Fluidics Organizer

Stator, 6 port, stainless steel 700001560 8005-0601

Rheodyne 7725(i) Injector Vespel rotor seal, for Rheodyne 7725(i) WAT055946 8005-0604626 LC SystemRheodyne 9125 Injector

Tefzel rotor seal WAT015781 8005-0603

2700 Sample Manager Rotor seal WAT272615 8005-06052707 Autosampler Rotor seal 700003851 8005-0602

Rheodyne stator, 8005-0601




Sample Loops, 1/pk

Model Volume (µL) Material

Similar toOEM Part No.


2690 Separations Module2690D Dissolution Separations Module2695 Separations Module2695D Dissolution Separations Module

100 Stainless steel 430001194 8005-0840

2695 Separations Module2695D Dissolution Separations Module

200 Stainless steel 430001630 8005-0841

2796 Bioseparations Module 20 PEEK 430000782 8005-08382796 Bioseparations Module 100 PEEK 430000783 8005-08392707 AutosamplerCapLC SystemCapLC XE System

5 Stainless steel 700000683 8005-0843

2707 Autosampler 10 Stainless steel 700003872 8005-08452707 AutosamplerCapLC SystemCapLC XE System

20 Stainless steel 700000680 8005-0842

2707 Autosampler 50 Stainless steel 700003928 8005-08462707 AutosamplerCapLC SystemCapLC XE System

100 Stainless steel 700000685 8005-0844



2960/2965 PM kit, 8005-0915


(Continued)

Performance Maintenance Kits

Model Description Kit Contents



Performance Maintenance Kits for Separation Modules 2690 Separations Module2690D DissolutionSeparations Module2695 Separations Module2695D DissolutionSeparations Module

2690/95 PerformanceMaintenance Kit

Contains 2 sapphire plungers, 2 seal wash plunger sealkits, 2 plunger seals replacements kits (standard, yellow),4 wash tube seal replacement kits, 1 battery, 1 diffuserassembly, 4 face seal replacement kits, 4 solvent reservoirfilters (10 µm), 1 syringe (250 µL), 1 precolumn filterinsert assembly, 2 check valve cartridges, 1 seal packrebuild kit with needle, 1 wash tube seal, 1 sealwashtube, 1 PTFE washer, 1 filter retainer, 1 lower wash sealfrit, 1 needlewash frit, 1 TFE washer, 1 needle assembly,2 injector seals, 1 stainless steel ferrule (1/16 in), 1 compression screw

WAT270944 8005-0915

2690 Separations Module2690D DissolutionSeparations Module2695 Separations Module2695D DissolutionSeparations Module

Seal Pack Rebuild KitWith Needle

Contains 1 wash tube seal, 1 sealwash tube, 1 PTFE washer, 1 filter retainer, 1 lower wash seal frit, 1 needlewash frit, 1 TFE washer, 1 needle assembly, 2 injector seals, 1 stainless steel ferrule (1/16 in), 1 compression screw

WAT271019 8005-0916



515 pump PM kit, 8005-0913


(Continued)

Performance Maintenance Kits for Pumps 515 HPLC Pump 515 Pump Performance

Maintenance KitContains 2 sapphire plunger assemblies, 2 plunger seals,1 solvent reservoir filter (10 µm), 1 sparge diffuser, 4 check valve cartridges

WAT052587 8005-0913

600 MultiSolvent Delivery System610 PowerLine Isocratic Pump

600 Pump PerformanceMaintenance Kit

Contains 2 sapphire plungers, 2 plunger seals, 4 solvent reservoir filters (10 µm), 4 check valvecartridges, 1 reference valve rebuild kit, 1 inlet manifoldrebuild kit, 4 sparge diffusers

WAT052675 8005-0930

616 LC System 616 LC PerformanceMaintenance Kit

Contains 2 sapphire plungers, 1 plunger seal kit (ultra high molecular weight polyethylene, yellow), 4 check valve cartridges, 4 sparge diffusers, 4 solvent reservoir filters (10 µm)

WAT052672 8005-0928

626 LC System 626 LC PerformanceMaintenance Kit

Contains 2 sapphire plungers, 2 plunger seals (ultra high molecular weight polyethylene, yellow), 4 solvent reservoir filters (10 µm), 4 check valvecartridges, 4 sparge diffusers

WAT052673 8005-0929

1515 HPLC Pump 1515 PumpPerformanceMaintenance Kit

Contains 2 sapphire plungers, 2 plunger seals, 4 check valve cartridges, 1 reference valve rebuild kit, 1 solvent reservoir filter (10 µm)

201000113 8005-0925

1525 HPLC Pump 1525 PumpPerformanceMaintenance Kit

Contains 4 sapphire plungers, 4 plunger seals, 8 check valve cartridges, 1 reference valve rebuild kit, 2 solvent reservoir filters (10 µm)

201000114 8005-0926

616 LC System626 LC System

Plunger and Wash SealRebuild Kit

Contains parts for both pump heads, 2 plunger seals, 2 plunger wash seals, 2 retainer seal O-rings, 6 plunger bearings

WAT031790 8005-0912








(Continued)





Performance Maintenance Kits for Pumps


Outlet Check ValveRebuild Kit

Contains 2 ball and seat for outlet check valves, 2 polychlorotrifluoroethylene (PCTFE) inserts, 2 stainless steel cup filters (2 µm), 4 large PTFE washers, 2 small PTFE washers

WAT026014 8005-0528


Inlet Check ValveRebuild Kit

Contains 2 ball and seat for inlet check valves, 2 retainergaskets, 2 TFE washers, 2 PTFE washers, 2 PCTFE inserts

WAT060495 8005-0914

Performance Maintenance Kits for Autosamplers717 Autosampler 717 Autosampler

PerformanceMaintenance Kit

Contains 1 seal pack replacement kit, 1 syringe (250 µL),1 filter (2.3 x 11.5 in), 2 filters (2 x 7 in)

WAT052669 8005-0927

1515 HPLC Pump1525 HPLC Pump510 HPLC Pump515 HPLC Pump600 MultiSolvent Delivery System610 PowerLine Isocratic Pump

Reference Valve Rebuild Kit

Contains 1 diaphragm for check valve, 1 gasket for checkvalve, 1 reference valve button

WAT025746 8005-0911



Rheodyne 9125 PM kit, 8005-0906Rheodyne 7725(i) PM kit, 8005-0904


Performance Maintenance Kits for Rheodyne ValvesRheodyne Injector, 3725(i) Performance

Maintenance Kit for Rheodyne 3725(i)Injector Valves

Contains 1 rotor seal (PEEK), 1 stator face assembly(PEEK), 1 isolation seal, 1 needle guide, 1 needle portcleaner, 1 hex key (5/64 in), 1 hex key (9/64 in)

201000116 8005-0901

Rheodyne Injector, 7010 PerformanceMaintenance Kit for Rheodyne 7010Injector Valves

Contains 1 isolation seal, 1 rotor seal (Vespel), 1 hex key (5/64 in), 1 hex key (9/64 in)

201000117 8005-0902

Rheodyne Injector, 7125 and 7126

PerformanceMaintenance Kit for Rheodyne 7125 and7126 Injector Valves

Contains 1 rotor seal (Vespel), 1 stator face assembly(PEEK/ceramic), 1 isolation seal, 1 needle guide, 1 needle port cleaner, 1 hex key (5/64 in), 1 hex key (9/64 in), instructions

201000118 8005-0903

Rheodyne Injector, 7725(i) PerformanceMaintenance Kit for Rheodyne 7725(i)Injector Valves

Contains 1 stator face assembly (PEEK/ceramic), 1 rotor seal (Vespel), 1 isolation seal, 1 needle guide, 1 needle port cleaner, 1 hex key (5/64 in), 1 hex key (9/64 in), instructions

201000119 8005-0904

Rheodyne Injector, 7750E PerformanceMaintenance Kit for Rheodyne 7750 Injector Valves

Contains 1 stator face assembly (PEEK/ceramic), 1 rotor seal (Vespel), 1 isolation seal, 1 hex key (9/64 in),instructions

201000122 8005-0907

Rheodyne Injector, 7750E-075

PerformanceMaintenance Kit for Rheodyne 7750E-075 Valves

Contains 1 rotor seal (PEEK), 1 stator face assembly(PEEK), 1 isolation seal, 1 hex key (9/64 in), instructions

201000125 8005-0908



Contains 1 stator face assembly (PEEK/ceramic), 1 rotor seal (PEEK), 1 isolation seal, 1 needle guide, 1 needle port cleaner, 1 hex key (5/64 in), 1 hex key (9/64 in), instructions

201000120 8005-0905



Contains 1 stator face assembly (PEEK/ceramic), 1 rotor seal (Tefzel), 1 isolation seal, 1 needle guide, 1 needle port cleaner, 1 hex key (5/64 in), 1 hex key (9/64 in), instructions

201000121 8005-0906







(Continued)

CrossLab capillary, stainless steel, 8005-0825 CrossLab capillary, PEEK, 8005-0812

HPLC Capillaries, 1/pk

Model From To Material OD (mm)ID

(mm)Length(mm) Fittings



2690 Separations Module2690D DissolutionSeparations Module2695 Separations Module2695D DissolutionSeparations Module

Pump Autosampler Stainlesssteel

1.6 0.23 760 With fittings,pre-swagedon both ends

WAT270975 8005-0824

2690 Separations Module2690D DissolutionSeparations Module2695 Separations Module2695D DissolutionSeparations Module2790 Separations Module2795 Separations Module

Autosampler ColumnThermostatValve

Stainlesssteel

1.6 0.23 760 With fittings,pre-swagedon both ends

WAT270979 8005-0825

2695 Separations Module2695D DissolutionSeparations Module

Autosampler ColumnThermostatValve

PEEK 1.6 0.13 6000 With fittings,non

pre-swaged

430000922 8005-0812




HPLC Fittings, Ferrules, and Unions

Description Unit



Compression screw, stainless steel, 1/16 in od 10/pk WAT005070 8005-0837Compression screws and ferrules 5/pk WAT025604 8005-0835Union, stainless steel, 1/16 in od 1/pk WAT097332 8005-0836


Alliance ColumnThermostatValve

Column Stainlesssteel

1.6 0.23 3000 No fittings WAT026973 8005-0823

Column DetectorAlliance Column

ThermostatValve


1.6 0.508 3000 No fittings WAT026804 8005-0826

Column DetectorAlliance Column

ThermostatValve


1.6 1.02 3000 No fittings WAT026805 8005-0822

Column DetectorFittingsAlliance Compression screws and ferrules WAT025604 8005-0835**This fitting is used with 8005-0823, 8005-0826, and 8005-0822

Model From To Material OD (mm)ID





The cross references to the original equipment manufacturer (OEM) part numbers listed here serve as a recommendationthat the Agilent CrossLab products are viable alternatives to OEM products. CrossLab products are compatible with thecorresponding OEM instruments, although in some cases, the CrossLab products may have slightly different designs ascompared to the OEM counterparts. All CrossLab supplies are backed by Agilent's 90-day money-back warranty.

42


Agilent CrossLab HPLC & Electrochemistry Supplies Selection Guide

CrossLab Supplies for Shimadzu HPLC SystemsDetector Lamps, 1/pk

Model Description



SPD-M10AvpSPD-M20A

Long-life deuterium lamp, 2,000 hours 228-34016-00 8001-0701Tungsten lamp, 1,200 hours 228-34410-91

228-34410-008001-0703

SPD-20A/AVSPD-10A/AVvpSPD-10AV

Long-life deuterium lamp, 2,000 hours 228-34016-02 8001-0702

SPD-20AVSPD-10AVvpSPD-10AV

Tungsten lamp, 1,200 hours 670-14602-00 8001-0705

LC-2010LC-2010HT

Long-life deuterium lamp, 2,000 hours 228-37401-00 8001-0704






Model Volume (µL) Description



AgilentCrossLabReplacement Plunger

AgilentCrossLabReplacement Barrel

SIL-10ASIL-10Ai

500 Chem (1/4-28 UNF screw threads), gas tight 228-25237-04 8001-0401 8001-0403 8001-0405

SIL-10ASIL-10Ai

2,500 Chem (1/4-28 UNF screw threads), gas tight 228-25237-06 8001-0402 8001-0406

Replacement syringe plunger, 500 µL, 8001-0403 Autosampler syringe, 8001-0401

43


www.agilent.com/chem/CrossLabHPLC


Plunger seal, 8001-0502

(Continued)

Sapphire plunger, 8001-0504


Pump Supplies, 1/pk

Model Description



Plungers and SealsLC-10ADvpLC-2010 (HT)

Sapphire plunger 228-35601-92228-34498-91

8001-0503

LC-20ADLC-20ADXRLC-20AB

Sapphire plunger 228-35601-93 8001-0504

LC-20AT Sapphire plunger assembly 228-35009-93 8001-0501LC-2010 Sapphire plunger assembly 228-35281-93 8001-0514LC-10ATvp Ceramic plunger assembly 228-35009-92 8001-0533LC-10ADvp Ceramic plunger assembly 228-35601-91 8001-0534LC-10ADvpLC-20AD/20ADXR/ABLC-30

Plunger holder 228-35602-91 8001-0515

LC-10AD/ADvp/LC-600/LC-9ALC-20AD/ABLC-2010 A/C (HT)

Plunger seal, graphite-filled PTFE(GFP)

228-35146-00 8001-0502

LC-10ATvpSIL-10ADvpSIL-20A/ACLC-20ATLC-2010 A/CLC-2010HTSIL-HT

Plunger seal, graphite-filled PTFE(GFP)

228-35145-00 8001-0522

44




Looking for Performance Maintenance Kits for Rheodyne Valves?Please see page 38.

Pump Supplies, 1/pk

Model Description



Check Valves and Cartridges

LC-2010LC-2010HT

Outlet check valve 228-37147-93228-37147-92

8001-0506

LC-20AT Primary inlet check valveassembly

228-48249-93 8001-0512

LC-20AD/20ABLC-10ADvp

Plunger seal, polyethylene 228-32628-00 8001-0530

LC-10ATvp/10AT/10AS Plunger seal, polyethylene 228-21975-00 8001-0527LC-10AS/10AT/10ATvp Plunger rinse seal, polyethylene 228-28499-00 8001-0615LC-20AT Rinse seal 228-35935 8001-0520LC-20AT Back-up ring for ring seal 228-35934 8001-0516LC-20AT Plunger seal spacer 228-42700 8001-0510

LC-10AT/ATvp Check valve IN 228-32166-91 8001-0528LC-10ADvp Check valve IN 228-39093-92 8001-0535LC-10ADvp/ATvp Check valve OUT 228-34976-91 8001-0532LC-10ADLC-600LC-9A

Check valve IN 228-33492-91 8001-0531

LC-10AT/ADLC-600LC-9A

Check valve OUT 228-32531-92 8001-0529

LC-20AD/AB XR Check valve IN 228-48249-91228-45557-91

8001-0511

LC-20AD/ABLC-10ADvp/ATvp

Outlet check valve 228-45705-91228-45563-95

8001-0521

LC-2010LC-2010HT

Inlet valve cartridge 228-37149-92228-37149-91

8001-0519

Plungers and Seals

45





Stator, 6-port valve, 8001-0604

PEEK rotor, low pressure valve (LPV), 8001-0608


Valve Replacement Parts, 1/pk

Model Description



SiL-10A/10Ai/10AxL Rotor, 6-port valve 228-21217-91 8001-0601SIL-10Ai Seal rotor, Vespel, 6-port valve 228-32511-31 8001-0606SIL-10ADvp Rotor, 6V assembly,

stainless steel surround228-21217-97 8001-0603

SIL-10A/10Ai Stator, 6-port valve 228-21220-91 8001-0604SiL-10AP Rotor assembly, Vespel,

preparative228-21217-93 8001-0602

SIL-20A/ACSIL-HT

Rotor, PEEK, high pressure valve(HPV)

228-41310-92228-40750-92

8001-0612

LC-2010 Rotor, Vespel, high pressurevalve (HPV)

228-38556-01 8001-0609

LC-2010LC-2010HTSIL-20SIL-HT

Rotor, PEEK, low pressure valve(LPV)

228-36923-00 8001-0608

LC-10ADvpLC-10ATvpSIL-10ADvpLC-20ATLC-2010/HT

O-ring for drain valve,perfluoroelastomer

670-11518 8001-0614

Sample Loops, 1/pk




SIL-20A/AC 100 Stainless steel 228-45402-91228-45402-95

8001-0814

SIL-10ADvp 100 Stainless steel, extended forpre-treatment

228-39751-92 8001-0812

LC-2010LD-2010HTSIL-HT

100 Stainless steel 228-41370-91228-37549-91

8001-0809

100 Stainless steel, 1/16 in 220-90800-20 8001-0801100 Stainless steel, 1/8 in 220-90800-30 8001-0802

46



(Continued)


Performance Maintenance Kits for PumpsLC-20AD Performance

MaintenanceKit for LC-20AD

Contains 2 graphite-filled PTFE (GFP) plunger seals, 1 stainless steel in-line filter, 1 stainless steel suction filter assembly, 1 plunger holderassembly, 4 stainless steel ferrules (1.6 F), 4 stainless steel male nuts (1.6 MN) for 1/16 in tubing, 4 PEEK finger-tight male nuts for 1/16 in tubing, 1 stainless steel capillary (1.6 mm od x 0.3 mm id x 2 m)

228-45593-91 8001-0901

LC-20AT PerformanceMaintenanceKit for LC-20AT

Contains 2 graphite-filled PTFE (GFP) plunger seals, 1 stainless steel in-line filter, 1 stainless steel suction filter assembly, 2 plunger sealspacers, 1 sapphire plunger assembly, 1 rinse seal holder assembly(includes rinse seal, seal holder, backup ring, and O-ring), 4 stainless steelferrules (1.6 F), 4 stainless steel male nuts for 1/16 in tubing (1.6 MN), 4 PEEK finger-tight male nuts for 1/16 in tubing, 1 stainless steel capillary(1.6 mm od x 0.3 mm id x 2 m)

228-45593-92 8001-0902

LC-20AT Rinse sealholderassembly

Includes 1 rinse seal, 1 stainless steel rinse seal holder, 1 back-up ring, 1 perfluoroelastomer O-ring for drain valve

228-35946-92 8001-0517

Performance Maintenance Kits for ValvesSIL-10ADvp Stator

assembly forSIL-10ADvp

Contains 1 ceramic rotor, 1 stator, 1 housing C manifold withintermediate plate

228-36730-91228-39349-01228-39755-91

8001-0610

Performance Maintenance Kits for AutosamplersSIL-10ADvp Performance

MaintenanceKit for SIL-10ADvp

Contains 1 6-port injection valve rotor, 1 needle seal (Vespel), 1 stainless steel solvent filter, 1 graphite-filled PTFE (GFP) plunger seal, 1 stainless steel injection transfer tubing (0.13 mm id x 200 mL), 3 notch septa, 2 PEEK male nuts, 1 tubing pinch clamp

228-39835-91 8001-0903

Rheodyne Injector,3725(i)

Rheodyne3725 PM kit

Contains 1 rotor seal (PEEK), 1 stator face assembly (PEEK), 1 isolation seal, 1 needle guide, 1 needle port cleaner, 1 hex key (5/64 in), 1 hex key (9/64 in)

8005-0901

Rheodyne Injector,7010

Rheodyne7010 PM kit


8005-0902

Rheodyne Injector,7125 and 7126

Rheodyne7125-7126PM kit

Contains 1 rotor seal (Vespel), 1 stator face assembly (PEEK/ceramic), 1 isolation seal, 1 needle guide, 1 needle port cleaner, 1 hex key (5/64 in), 1 hex key (9/64 in), instructions

8005-0903


Rheodyne7725i PM kit

Contains 1 stator face assembly (PEEK/ceramic), 1 rotor seal (Vespel), 1 isolation seal, 1 needle guide, 1 needle port cleaner, 1 hex key (5/64in), 1 hex key (9/64 in), instructions

8005-0904

Performance Maintenance Kits for Rheodyne Valves





Rheodyne 7725(i) PM kit, 8005-0904

47




Capillary assembly, flexible stainless steel, 8001-8020

Rheodyne Injector,7750E

Rheodyne7750E PM kit

Contains 1 stator face assembly (PEEK/ceramic), 1 rotor seal (Vespel), 1 isolation seal, 1 hex key (9/64 in), instructions

8005-0907

Rheodyne Injector,7750E-075

Rheodyne7750E-075PM kit

Contains 1 rotor seal (PEEK), 1 stator face assembly (PEEK), 1 isolationseal, 1 hex key (9/64 in), instructions

8005-0908


Rheodyne8125 PM kit


8005-0905


Rheodyne9125 PM kit


8005-0906


Model From To MaterialOD

(mm)ID




LC-2010 Autosampler Column Flexiblestainless

steel

0.6 0.17 200 No fittings 228-38043-91 8001-0810

SIL-10ADvp Injector High pressurevalve port #1

Flexiblestainless

steel

0.6 0.13 200 With fittings, non pre-swaged

228-39756-92 8001-8020

SIL-10ADvpSIL-20A/AC

Pump Autosampler Stainlesssteel

1.6 0.3 600 No fittings 228-22306-00 8001-0818

LC-20AP Stainlesssteel

1.6 0.8 2000 No fittings 228-49820-00228-50579-43

8001-0821

LC-20ATLC-20ADSIL-10ADvp

Stainlesssteel

1.6 0.3 2000 No fittings 228-36993-96228-50579-91

8001-0822

Rheodyne 9125 PM kit, 8005-0906

Performance Maintenance Kits for Rheodyne ValvesModel Description Kit Contents




48



HPLC In-Line Filters




LC-2010LC-20AD/AB/ATLC-10ADvp/ATvp

Stainless steel in-line filter 1/pk 228-35871-96228-35871-94

8001-0808


ETFE tubing for use between the inlet block and the check valve, 8001-0807

PTFE ferrule, 3.0 F-T, 8001-0803

Flangeless nut, M6, 8001-0813

Stainless steel male nut, 1.6 MN, for 1/16 in tubing, 8001-0805

Stainless steel male nut, 1.6 MN, W6 (taller hex portion), 8001-0806

Stainless steel in-line filter, 8001-0808

Tubing

Model DescriptionOD

(mm)ID




LC-2010LC-20AD

ETFE tubing foruse betweenthe inlet blockand the checkvalve

1.6 0.8 3000 No fittings 228-18495-01 8001-0807

LC-2010SIl-20A/AC

FEP tubing 3 1.5 3000 No fittings 670-10321-05 8001-0823

SPD-20A/AVSPD-M20A

PEEK tubing 1.6 0.25 500 No fittings 670-10324-01228-33376-50

8001-0824





LC-2010 PTFE ferrule, 3.0 F-T 1/pk 228-12493-00 8001-0803LC-20ATLD-20AD

Stainless steel ferrule, 1.6 F 1/pk 228-16000-10 8001-0816

LC-2010 Flangeless nut, M6 1/pk 228-39999-05 8001-0813SIL-20A/ACLC-20ATLC-20AD

Stainless steel male nut, 1.6 MN, for 1/16 in tubing

1/pk 228-16001-00 8001-0805

SIL-10ADvpSIL-20A/AC

Stainless steel male nut, 1.6 MN, W6 (taller hex portion)

1/pk 228-16001-03 8001-0806

LC-20AD/ABLC-10ADvp

PEEK male nut, 1.6 MN, for plumbing line between inlet blockand check valve

1/pk 228-35403-00 8001-0819

PEEK male nut, finger-tight for 1/16 in tubing

1/pk 228-18565-84 8001-0817


CrossLab Supplies for Dionex HPLC Systems




Detector Lamps, 1/pk

Model Description



VWD-3000 SeriesMWD-3000 SeriesDAD-3000 Series

Long-life deuterium lamp, 2,000 hours

6074.1110 8002-0703

VWD-3000 SeriesMWD-3000 SeriesDAD-3000 Series

Tungsten lamp, 2,000 hours 6074.2000 8002-0705

UVD 170/340UVD 160/320


5053.1204 8002-0701

PDA-100AD-25


939016T 8002-0704

PDA-100AD-25

Tungsten lamp, 5,000 hours 056123T 8002-0706



Removable needle, gas tight, 8002-0401Chem (1/4-28 UNF screw threads), gas tight, 8002-0405



ModelVolume

(µL) Description



Agilent CrossLabReplacement Needle (Needle Gauge/Length (mm)/Tip)

Agilent CrossLab ReplacementPlunger

WPS-3000SL 25 Chem (1/4-28 UNF screw threads),gas tight

6822.0001 8002-0405

250 Chem (1/4-28 UNF screw threads),gas tight

6822.0003 8002-0407

ASI-100 100 Removable needle, gas tight 5805.2920 8002-0401* 8002-0413, 22/51/3,6/pk

8002-0402

8002-0412,22s/51/3, 6/pk

1,000 Removable needle, gas tight 5805.2940 8002-0403* 8002-0414, 22/51/3,6/pk

8002-0406

8002-0415,22s/51/3, 6/pk

2,500 Removable needle, gas tight 5805.2950 8002-0404* 8002-0414, 22/51/3,6/pk

8002-0408

8002-0415,22s/51/3, 6/pk

*Needles are sold separately

Autosampler Supplies

Model MaterialOD

(mm)ID

(mm)Length(mm)

Volume(µL) Fittings



Needle Seat Capillaries, 1/pkWPS-3000SL Stainless steel 0.8 0.12 120 1.35 With fittings,

non pre-swaged6820.2407 8002-0808

WPS-3000SL Stainless steel 0.8 0.18 120 3.1 With fittings, non pre-swaged

6820.2408 8002-0809

WPS-3000SLSemiprep

Stainless steel 0.8 0.5 120 24 With fittings, non pre-swaged

6820.2409 8002-0810




(Continued)

Pump Supplies




Pistons and SealsISO-3100ALPG-3400ALPG-3400ABLPG-3400MLPG-3400MBDGP-3600ADGP-3600ABDGP-3600MDGP-3600MBHPG-3x00AHPG-3x00M

Piston, sapphire 1/pk 6035.2240 8002-0515

ISO-3100SDLPG-3400SDLPG-3400RSDGP-3600SDDGP-3600RSHPG-3x00SDHPG-3x00RS

Piston seal, reversed-phase 2/pk 6040.0304 8002-0502

ISO-3100SDLPG-3400SDLPG-3400RSDGP-3600SDDGP-3600RSHPG-3x00SDHPG-3x00RS

Support ring for pistons seals 2/pk 6040.0012 8002-0501

UltiMate 3000 pump series Ring seal, DR-8, PTFE 10/pk 2266.0082 8002-0601




Check Valves and CartridgesUltiMate 3000 RS pumps, optional for SD and BM pumps

Check valve cartridge, ceramic 1/pk 6041.2301 8002-0517

ISO-3100ALPG-3400ALPG-3400MLPG-3400MBLPG-3400ABDGP-3600ADGP-3600MDGP-3600MBDGP-3600ABHPG-3x00AHPG-3x00MHPG-3200P

Check valve cartridge, sapphire, biocompatible 1/pk 6035.23006041.2300

8002-0516




Pump Supplies




Vespel rotor seal, 8002-0602 Stainless steel stator, 8002-0603Tefzel rotor seal, 8002-0604

Valve Replacement Parts




FLM-3x00 Rotor seal, proprietary inert polymer composite, 2-position 10-port C2 switching valve (standard)

1/pk 6720.0110 8002-0607

FLM-3x00 Rotor seal, polyaryletherketone/PTFE composite, 2-position 10-port C2 switching valve (biocompatible)

1/pk 6720.0092 8002-0605

FLM-3x00 Stator, stainless steel, 2-position 10-port C2 switching valve(standard)

1/pk 6720.0111 8002-0608

ASI-100 Tefzel rotor seal 1/pk 709.7010.071 8002-0604ASI-100Rheodyne injectors

Vespel rotor seal 1/pk 709.7010.039 8002-0602

ASI-100Rheodyne injectors

Stainless steel stator 1/pk 709.7010.040 8002-0603




Looking for Performance Maintenance Kitsfor Rheodyne Valves?Please see page 38.

Sample Loops, 1/pk

Model DescriptionVolume

(µL) Material



ASI-100 series For 100 µL syringe 100 Stainless steel 5810.3012 8002-0859ASI-100ASI-100T

For 250 µL syringe 150 Stainless steel 5810.3003 8002-0856

ASI-100 series For 1000 µL syringe 1000 Stainless steel 5810.3010 8002-0857ASI-100PASI-100PT


WPS-3000SL AnalyticalWPS-3000RS


WPS-3000SL AnalyticalWPS-3000RS

Standard sample loop 250 Stainless steel 6820.2422 8002-0812

Buffer Loops, 1/pk




WPS-3000SLAnalyticalWPS-3000RS

100 Stainless steel 6820.2413 8002-0860

WPS-3000SL Semiprep >250 Stainless steel 6820.2421 8002-0811WPS-3000TBSLAnalytical

100 Glass lined stainless steel 6827.2413 8002-0862*

*Biocompatible



(Continued)


ISO-3100SD PerformanceMaintenance Kit forISO-3100SD pump

Contains 1 solvent line filter holder, 1 stainless steel solvent line filter frit (Porosity: 10 µm), 1 silicone tubing (2.8 mm od x 1.3 mm id x 1.5 m), 1 PharMed tubing forperistaltic pump (3.2 mm od x 1.6 mm id x 180 mm), 3 tube connectors for 1.0-2.0 mm id tubing, 4 piston seals(reversed-phase), 2 support rings, 1 PTFE O-ring seal for seal wash system (9 mm x 1.5 mm), 1 PTFE O-ring sealfor seal wash system (32 mm x 1.5 mm), 1 check valvecartridge (sapphire), 1 cap seal for purge valve knob

6040.1950 8002-0907

ISO-3100BM PerformanceMaintenance Kit forISO-3100BM pump

Contains 1 solvent line filter holder, 1 PEEK solvent line filter frit (Porosity: 10 µm), 1 silicone tubing (2.8 mm od x 1.3 mm id x 1.5 m), 1 PharMed tubing for peristaltic pump (3.2 mm od x 1.6 mm id x 180 mm), 3 tube connectors for 1.0-2.0 mm id tubing, 4 piston seals(reversed-phase), 2 support rings, 1 PTFE O-ring seal for seal wash system (9 mm x 1.5 mm), 1 PTFE O-ring seal for seal wash system (32 mm x 1.5 mm), 1 check valvecartridge (sapphire), 1 cap seal for purge valve knob

6042.1950 8002-0917

LPG-3400SD PerformanceMaintenance Kit forLPG-3400SD pump

Contains 4 solvent line filter holders, 4 stainless steelsolvent line filter frits (Porosity: 10 µm), 1 silicone tubing(2.8 mm od x 1.3 mm id x 1.5 m), 1 PharMed tubing forperistaltic pump (3.2 mm od x 1.6 mm id x 180 mm), 3 tube connectors for 1.0-2.0 mm id tubing, 4 piston seals(reversed-phase), 2 support rings, 1 PTFE O-ring seal forseal wash system (9 mm x 1.5 mm), 1 PTFE O-ring seal for seal wash system (32 mm x 1.5 mm), 1 check valvecartridge (sapphire), 1 cap seal for purge valve knob

6040.1951 8002-0908

LPG-3400RS PerformanceMaintenance Kit forLPG-3400RS pump

Contains 4 solvent line filter holders, 4 stainless steelsolvent line filter frits (Porosity: 10 µm), 1 silicone tubing(2.8 mm od x 1.3 mm id x 1.5 m), 1 PharMed tubing for peristaltic pump (3.2 mm od x 1.6 mm id x 180 mm), 3 tube connectors for 1.0-2.0 mm id tubing, 4 piston seals(reversed-phase), 1 PTFE O-ring seal for seal wash system(9 mm x 1.5 mm), 1 PTFE O-ring seal for seal wash system(32 mm x 1.5 mm), 1 check valve cartridge (ceramic), 1 cap seal for purge valve knob

6040.1954 8002-0911






LPG-3400BM PerformanceMaintenance Kit forLPG-3400BM pump

Contains 4 solvent line filter holders, 4 PEEK solvent line filter frits (Porosity: 10 µm), 1 silicone tubing (2.8 mm od x 1.3 mm id x 1.5 m), 1 PharMed tubing for peristaltic pump (3.2 mm od x 1.6 mm id x 180 mm), 3 tube connectors for 1.0-2.0 mm id tubing, 4 piston seals(reversed-phase), 2 support rings, 1 PTFE O-ring seal forseal wash system (9 mm x 1.5 mm), 1 PTFE O-ring seal forseal wash system (32 mm x 1.5 mm), 1 titanium inline filterfrit (Porosity: 2 µm), 1 check valve cartridge (sapphire), 1 cap seal for purge valve knob

6042.1951 8002-0918



(Continued)


DGP-3600RS PerformanceMaintenance Kit forDGP-3600RS pump

Contains 6 solvent line filter holders, 6 stainless steelsolvent line filter frits (Porosity: 10 µm), 1 silicone tubing(2.8 mm od x 1.3 mm id x 1.5 m), 1PharMed tubing forperistaltic pump (3.2 mm od x 1.6 mm od x 180 mm), 5 tube connectors for 1.0-2.0 mm id tubing, 8 piston seals(reversed-phase), 2 PTFE O-ring seals for seal wash system(9 mm x 1.5 mm), 2 PTFE O-ring seals for seal wash system(32 mm x 1.5 mm), 2 check valve cartridges (ceramic), 2 cap seals for purge valve knob

6040.1955 8002-0912

DGP-3600BM PerformanceMaintenance Kit forDGP-3600BM pump

Contains 6 solvent line filter holders, 6 PEEK solvent line filter frits (Porosity: 10 µm), 1 silicone tubing (2.8 mm od x 1.3 mm id x 1.5 m), 1 PharMed tubing forperistaltic pump (3.2 mm od x 1.6 mm id x 180 mm), 5 tube connectors for 1.0-2.0 mm id tubing, 8 piston seals(reversed-phase), 4 support rings, 2 PTFE O-ring seals for seal wash system (9 mm x 1.5 mm), 2 PTFE O-ring sealsfor seal wash system (32 mm x 1.5 mm), 2 titanium inlinefilter frits (Porosity: 2 µm), 2 check valve cartridges(sapphire), 2 cap seals for purge valve knob

6042.1952 8002-0919

HPG-3x00SD PerformanceMaintenance Kit forHPG-3x00SD pump

Contains 4 solvent line filter holders, 4 stainless steelsolvent line filter frits (Porosity: 10 µm), 1 silicone tubing(2.8 mm od x 1.3 mm id x 1.5 m), 1 PharMed tubing forperistaltic pump (3.2 mm od x 1.6 mm id x 180 mm), 5 tube connectors for 1.0-2.0 mm id tubing, 8 piston seals(reversed-phase), 4 support rings, 2 PTFE O-ring seals forseal wash system (9 mm x 1.5 mm), 2 PTFE O-ring seals for seal wash system (32 mm x 1.5 mm), 2 check valvecartridges (sapphire), 1 cap seal for purge valve knob

6040.1953 8002-0910

DGP-3600SD PerformanceMaintenance Kit forDGP-3600SD pump

Contains 6 solvent line filter holders, 6 stainless steelsolvent line filter frits (Porosity: 10 µm), 1 silicone tubing(2.8 mm od x 1.3 mm id x 1.5 m), 1 PharMed tubing forperistaltic pump (3.2 mm od x 1.6 mm id x 180 mm), 5 tube connectors for 1.0-2.0 mm id tubing, 8 piston seals(reversed-phase), 4 support rings, 2 PTFE O-ring seals forseal wash system (9 mm x 1.5 mm), 2 PTFE O-ring seals for seal wash system (32 mm x 1.5 mm), 2 check valvecartridges (sapphire), 2 cap seals for purge valve knob

6040.1952 8002-0909








(Continued)


HPG-3x00RS PerformanceMaintenance Kit forHPG-3x00RS pump

Contains 4 solvent line filter holders, 4 stainless steelsolvent line filter frits (Porosity: 10 µm), 1 silicone tubing(2.8 mm od x 1.3 mm id x 1.5 m), 1 PharMed tubing forperistaltic pump (3.2 mm od x 1.6 mm id x 180 mm), 5 tube connectors for 1.0-2.0 mm id tubing, 8 piston seals(reversed-phase), 2 PTFE O-ring seals for seal wash system(9 mm x 1.5 mm) 2 PTFE O-ring seals for seal wash system(32 mm x 1.5 mm), 2 check valve cartridges (ceramic), 1 cap seal for purge valve knob

6040.1956 8002-0913

ISO-3100ALPG-3400A and MDGP-3600A and MHPG-3x00 A and M

PerformanceMaintenance Kit forUltiMate 3000 pumpswith floating pistons

Contains 2 solvent line filter holders, 1 stirrer, 1 ethylene chlorotrifluoroethylene tubing (1.6 mm od x 0.75 mm id x 1 m), 1 silicone tubing (2.8 mm od x 1.3 mm id x 1.5 m), 1 PharMed tubing for peristaltic pump (3.2 mm od x 1.6 mm id x 180 mm), 2 PEEK fittings for 1/8 in od tubing, 2 PEEK fittings fordegasser, 2 PEEK knurled head screws (1/4-28 for ferrule,1/16), 1 tube connector for 1.0-2.0 mm id tubing, 2 PEEK ferrules (1/16 in for head screw, 1/4-28), 4 ringseals (DR-8), 8 piston seals (reversed-phase), 2 mixingchamber gaskets, 4 silicone O-rings (22 mm x 2 mm), 4 sapphire pistons, 4 stainless steel inline filter frits(Porosity: 0.5 µm), 4 stainless steel inline filter frits (Porosity: 10 µm), 8 stainless steel solvent line filter frits(Porosity: 10 µm), 2 piston support hemispheres, 4 support rings, 2 micro-flow ring seals, 4 check valvecartridges (sapphire)

6035.1961 8002-0904

LPG-3400AB and MBDGP-3600AB and MB

PerformanceMaintenance Kit forUltiMate 3000 pumpswith floating pistons,Biocompatible

Contains ethylene chlorotrifluoroethylene tubing (1.6 mm od x 0.75 mm id x 1 m), 1 silicone tubing (2.8 mm od x 1.3 mm id x 1.5 m), 1 PharMed tubing for peristaltic pump (3.2 mm od x 1.6 mm id x 180 mm), 2 PEEK fittings for 1/8 in od tubing, 2 PEEK fittings fordegasser, 2 PEEK knurled head screws (1/4-28 for ferrule1/16 in), 1 tube connector for 1.0-2.0 mm id tubing, 2 PEEK ferrules for head screw 1/4-28 (1/16 in), 4 ring seals (DR-8), 8 piston seals (reversed-phase), 4 O-rings (silicone, 22 mm x 2 mm), 4 sapphire pistons, 4 PEEK inline filter frits (Porosity: 0.5 µm), 4 titanium inlinefilter frits (Porosity: 10 µm), 2 solvent line filter holders, 6 titanium solvent line filter frits (Porosity: 10 µm), 2 piston support hemispheres, 4 support rings, 2 micro-flow ring seals, 4 check valve cartridges (sapphire),2 mixing chamber gaskets

6035.1963 8002-0906

Performance Maintenance Kits for PumpsModel Description Kit Contents






(Continued)


HPG-3200P PerformanceMaintenance Kit forHPG-3200P pump

Contains 1 stirrer, 1 silicone tubing (2.80 mm od x 1.30 mm id x 1.5 m), 1 PharMed tubing for peristaltic pump (3.2 mm od x 1.6 mm id x 180 mm), 1 FEP tubing (4.5 mm od x 3.0 mm id x 2 m), 1 tube connector for 1.0-2.0 mm id tubing, 2 tube adaptors(3.0 mm id 1/4 in-28), 4 ring seals (DR-8), 8 piston seals(reversed-phase, semi-preparative), 2 mixing chambergaskets, 4 ceramic pistons (semi-preparative), 4 stainesssteel inline filter frits (Porosity: 10 µm), 2 stainless steelsolvent line filters (Porosity: 10 µm), 4 support rings (semi-preparative), 4 check valve cartridges (sapphire)

6035.1962 8002-0905

ISO-3100ALPG-3400 A and MDGP-3600 A and MHPG-3x00 A and M

Piston seal/support ring kit,reversed-phase

Contains 2 piston seals and 1 support ring 6025.2010A 8002-0923

LPG-3400ABLPG-3400MBDGP-3600ABDGP-3600MBISO-3100BMLPG-3400BMDPG-3600BM

Piston seal/support ring kit,reversed-phase,biocompatible

Contains 1 support ring and 2 piston seals 6025.2012 8002-0901

HPG-3200PP680

Piston seal/support ring kit,reversed-phase, semi-preparative


HPG-3200PP680

Piston seal/supportring kit, normal phase,semi-preparative


Performance Maintenance Kits for PumpsModel Description Kit Contents






(Continued)






Performance Maintenance Kits for PumpsISO-3100ALPG-3400ALPG-3400MDGP-3600ADGP-3600MHPG-3x00AHPG-3x00MISO-3100SDLPG-3400SDDGP-3600SDHPG-3x00SD

Piston seal/supportring kit, normal phase

Includes 2 piston seals and 1 support ring 6025.2011A 8002-0924

ISO-3100SDISO-3100BMLPG-3400SDLPG-3400BMLPG-3400RSDGP-3600SDDGP-3600BMDGP-3600RSHPG-3x00SDHPG-3x00RSHPG-3200BX

PTFE seal kit for rearseal wash system

Contains 5 PTFE O-ring seals (9 mm x 1.5 mm), 5 PTFE O-ring seals (32 mm x 1.5 mm)

6040.2208 8002-0915

ISO-3100SDISO-3100BMLGP-3400SDLGP-3400RSLGP-3400BMDGP-3600SDDGP-3600RSDGP-3600BMHPG-3x00SDHPG-3x00RS

Tubing kit for rear sealwash system

Contains 1 silicone tubing (2.80 mm od x 1.3 mm id x 1.5 m), 1 PharMed tubing for peristaltic pump (3.2 mm od x 1.6 mm id x 180 mm), 7 tube connectors for 1.0-2.0 mm id tubing

6040.9502 8002-0916



Looking for Performance Maintenance Kitsfor Rheodyne Valves?Please see page 38.






Performance Maintenance Kits for Rheodyne Valves


Rheodyne 7725i PM kit

Contains 1 stator face assembly (PEEK/ceramic), 1 rotor seal (Vespel), 1 isolation seal, 1 needle guide, 1 needle port cleaner, 1 hex key (5/64 in), 1 hex key (9/64 in), instructions

8005-0904

Rheodyne Injector,7750E

Rheodyne 7750E PM kit

Contains 1 stator face assembly (PEEK/ceramic), 1 rotor seal (Vespel), 1 isolation seal, 1 hex key (9/64 in), instructions

8005-0907

Rheodyne Injector,7750E-075

Rheodyne 7750E-075 PM kit

Contains 1 rotor seal (PEEK), 1 stator face assembly (PEEK),1 isolation seal, 1 hex key (9/64 in), instructions

8005-0908


Rheodyne 8125 PM kit


8005-0905




8005-0906

Performance Maintenance Kits for AutosamplersWPS-3000TBSLAutosampler

Rotor seal and statorface seal kit

Contains 1 rotor seal and 1 stator face 6722.9014 8002-0611

WPS-3000SLWPS-3000RS

Injection volume kit,250 µL

Contains 1 stainless steel sample loop (250 µL), 1 syringe(250 µL), 1 stainless steel buffer loop (> 250 µL)

6822.2432 8002-0922



Contains 1 rotor seal (PEEK), 1 stator face assembly (PEEK),1 isolation seal, 1 needle guide, 1 needle port cleaner, 1 hex key (5/64 in), 1 hex key (9/64 in)

8005-0901

Rheodyne Injector,7010



8005-0902


Rheodyne 7125-7126PM kit

Contains 1 rotor seal (Vespel), 1 stator face assembly(PEEK/ceramic), 1 isolation seal, 1 needle guide, 1 needle port cleaner, 1 hex key (5/64 in), 1 hex key (9/64 in), instructions

8005-0903



(Continued)



CrossLab capillary, PEEK, 8002-0834CrossLab capillary, stainless steel, 8002-0833



(mm)ID




UltiMate 3000 RS Pump Autosampler Flexiblestainless steel

0.6 0.13 450 With fittings, nonpre-swaged

6040.2345 8002-0822

UltiMate 3000 SD Pump Autosampler Flexiblestainless steel


6040.2365 8002-0824

UltiMate 3000 RS Autosampler ColumnThermostatValve

Flexiblestainless steel


6040.2335 8002-0821

UltiMate 3000 SD Autosampler ColumnThermostatValve

Flexiblestainless steel


6040.2375 8002-0825

UltiMate 3000 Autosampler ColumnThermostatValve

Stainless steel 1.6 0.23 340 With fittings, nonpre-swaged

6820.2418 8002-0837

UltiMate 3000 RS ColumnThermostatValve

Column Flexiblestainless steel


6040.2305 8002-0818

UltiMate 3000 RS Pump Autosampler Flexiblestainless steel


6040.2355 8002-0823UltiMate 3000 SD Column

ThermostatValve

Column

UltiMate 3000 RS Column Detector Flexiblestainless steel


6040.2325 8002-0820

UltiMate 3000 SD Column Detector Flexiblestainless steel


6040.2385 8002-0826

UltiMate 3000 Column Detector Stainless steel 1.6 0.13 250 With fittings, nonpre-swaged

6074.2410 8002-0833

UltiMate 3000 Column Detector PEEK 1.6 0.13 250 With fittings, nonpre-swaged

6074.2415 8002-0834

UltiMate 3000 Column Detector Stainless steel 1.6 0.23 250 With fittings, nonpre-swaged

6074.2400 8002-0831

UltiMate 3000 Column Detector PEEK 1.6 0.25 250 With fittings, nonpre-swaged

6074.2405 8002-0832

UltiMate 3000 RS Flexiblestainless steel


6040.2315 8002-0819




CrossLab capillary and fitting kit, 8002-0817



(mm)ID




Summit ASI-100 Autosampler Column Stainless steel With fittings, nonpre-swaged

6000.0020 8002-0817*

UVD 170UUVD 340U

Column Detector PEEK 1.6 0.5 1000 No fittings 2251.6002 8002-0815

*CrossLab capillary and fitting kit, for ASI-100 Autosampler, contains 1 stainless steel capillary (0.7 mm id x 1 m), 2 stainless steel capillaries (0.25 mm id x 2 m), 15 10-32UNF stainless steel fittings, 5 10-32UNF stainless steel long fittings, 3 10-32UNF stainless steel extra long fittings, 15 stainless steel ferrules 1/16 in, and 8 stainless steel long ferrules 1/16 in

VWD-3100VWD-3100RSVWD-3400VWD-3400RSDAD-3000DAD-3000RSMWD-3000MWD-3000RSISO-3100BMLPG-3400ABLPG-3400MBLPG-3400BMDPG-3600ABDPG-3600MBDPG-3600BM

PEEK 1.6 0.25 2000 No fittings 6251.6001 8002-0835

Summit P680 Pump Autosampler Stainless steel 1.6 0.508 178 With fittings, nonpre-swaged

5030.3020 8002-0816



Tubing

Model DescriptionOD

(mm)ID

(mm)Length (mm) Fittings



LPG-3x00 peristaltic pump PharMed biocompatible tubing 3.2 1.6 180 No fittings 6000.5000 8002-0803





UltiMate 3000 Series Blind nut, FS-8 biocompatible 1/pk 6000.01446000.0044

8002-0802

WPS-3000(T)SLWPS-3000(T)SL SemiprepWPS-3000(T)RS

Ferrule and fitting kit, contains 6 ferrules and 6 long fitting screws

6822.0011 8002-0921


Blind nut, FS-8 biocompatible, 8002-0802

Filter frit for titanium in-line filter, 2 µL, 8002-0806

HPLC In-Line Filters




LPG-3400BMDGP-3600BM

Filter frit for titanium in-linefilter, 2 µL

1/pk 6268.0036 8002-0806



CrossLab Supplies for CTC AnalyticsHPLC AutosamplersAutosampler Syringes for CTC HTS and HTC PAL

Volume (µL) OD (mm) Description Needle Gauge/Length (mm)/TipAgilent CrossLabSyringe Part No.

Agilent CrossLabReplacementPlunger Part No.

10 6.7 Fixed needle 22s/51/3 8010-0440, 1/pk6.7 Fixed needle, gas tight 22s/51/3 8010-0445, 1/pk 8010-0457, 10/pk

25 7.9 Fixed needle, gas tight 22s/51/3 8010-0441, 1/pk 8010-0458, 10/pk6.7 Fixed needle, gas tight 22s/51/3 8010-0449, 1/pk 8010-0450, 10/pk

100 6.7 Fixed needle, gas tight 22s/51/3 8010-0442, 1/pk 8010-0459, 10/pk6.7 Fixed needle, gas tight 22/51/3 8010-0446, 1/pk 8010-0459, 10/pk

250 7.9 Fixed needle, gas tight 22/51/3 8010-0467, 1/pk 8010-0456, 10/pk500 7.9 Fixed needle, gas tight 22/51/3 8010-0468, 1/pk 8010-0460, 10/pk1.0 mL 7.9 Fixed needle, gas tight 22/51/3 8010-0443, 1/pk 8010-0455, 1/pk2.5 mL 7.9 Fixed needle, gas tight 22/51/3 8010-0444, 1/pk 8010-0448, 1/pk



The table below illustrates that the Agilent CrossLab vial portfolio is compatible with a wide range of HPLC and GC autosamplers.

CrossLab Vial Compatibility

Manufacturer Autosampler8 mm

Screw Top9 mm

Screw Top15 x 45 mm,

4 mL11 mm

Crimp Top HeadspaceWaters 717 Plus 3

Acquity 3 3 3

Alliance 2690 3 3

CapLC 3 3 3

WISP 3

Shimadzu AOC14/1400 3 3 3

AOC-20 3 3 3

AOC 88/9 3 3 3

AOC-5000 3 3 3 MagneticHSS-2B/4B 3

LC 2010 3 3 3

SIL-6A/6B/9A With flangeSIL-10A, SIL-10Ai, SIL-10AxL 3 3

SIL-HT/10ADVP 3 3 3

Thermo Scientific A-200S/AS 150/800/8000 3 3 3

AS 3000/TRACE GC 3 3

ASI-100 3 3 3

SURVEYOR LC 3 3 3

TriPlus 3 3

WPS-3000RS 3 3 3

WPS-3000SL 3 3 3

Bruker, Varian* 8034/8035/8100/8200 3 3 3

9095/9100 3 3 3

CP-8410 3 3 3

Genesis 3

PerkinElmer Autosystem GC/XL/AS-2000 3 3 3 3

Clarus 500/600 3 3

HS16/40 3

Integral 4000 3 3 3

ISS-100/200 3 3 3

LC 600 42 vial tray 3

LC Plus 3 3 3

TurboMatrix 40/110 3

CTC Analytics CombiPal 3 3 3 Magnetic

*Formerly Varian systems, now Bruker products




Agilent CrossLab Vial Identification Chart with Recommended Fill VolumesThe Agilent CrossLab vial identification chart below provides a quick reference on vial dimensions, fill volumes, and Agilent CrossLab partnumbers for a variety of vials, along with the recommended closures, for both HPLC and GC autosamplers.

32 mm x 12 mm1.5 mL

8010-00238010-0108

32 mm x 12 mm1.3 mL

8010-00288010-0108

0.8 mL8010-01538010-0516

32 mm x 5.5 mm0.1 mL

8010-01548010-0516

250 µL8010-01558010-0516

32 mm x 12 mm1.5 mL

8010-00108010-0061

32 mm x 12 mm1.3 mL

8010-00048010-0050

32 mm x 12 mm1.7 mL

8010-00018010-0050

32 mm x 12 mm0.3 mL

8010-00068010-0050

32 mm x 12 mm1.7 mL

8010-00148010-0086

32 mm x 12 mm1.3 mL

8010-00188010-0086

32 mm x 12 mm0.3 mL

8010-00088010-0086

37 mm x 22 mm6 mL

8010-00228010-0101

45 mm x 15 mm4 mL

8010-00208010-0095

37 mm x 22 mm6 mL

8010-01518010-0116

28 mm x 4.8 mm150 µL

8010-0124

31 mm x 4.8 mm150 µL

8010-0125

31 mm x 4.8 mm200 µL

8010-0126

30 mm x 5.6 mm250 µL

8010-0131

31 mm x 5.6 mm250 µL

8010-0132

31 mm x 5.6 mm 400 µL

8010-0136

75 mm x 22 mm20 mL

8010-00428010-0139

75 mm x 22 mm20 mL

8010-00338010-0116

45 mm x 22 mm10 mL

8010-00298010-0116

45 mm x 22 mm10 mL

8010-00308010-0116

75 mm x 22 mm20 mL

8010-00348010-0116

75 mm x 22 mm20 mL

8010-01528010-0116

32 mm x 12 mm250 µL

8010-01588010-0050

32 mm x 12 mm250 µL

8010-01608010-0050Glass Insert

32 mm x 12 mm250 µL

8010-01628010-0086Glass Insert

32 mm x 12 mm250 µL

8010-01618010-0086

32 mm x 12 mm0.7 mL

8010-01598010-0050

45 mm x 22 mm10 mL

8010-00388010-0139

32 mm x 5.5 mm40 mm x 7 mm

Wide Opening Screw Top Vials (9 mm)

Narrow Opening Screw Top Vials (8 mm)

Wide Opening Crimp Top Vials (11 mm)

Wide Opening Snap Top Vials Micro Vials Polypropylene Vials

Headspace Vials

Specialty Vials Inserts for Wide Opening Vials (11 mm & 9 mm)

Inserts for Narrow Opening Vials (8 mm)

Dimensions:Recommended Fill:Part Number:Recommended Cap*:



Dimensions:Recommended Fill:Part Number:Recommended Cap*:*Caps are available in a variety of colors

Crimp/Snap Top Screw Top



Agilent provides this septa compatibility information as a guide and starting reference point. We realize that chemical compatibility can varydepending on the concentration of the solvent, temperature, molecular weight of the solvent, and other factors. Therefore, it is alwaysrecommended that you try a variety of septa to determine the best one for your analysis.

Vial Septum Chemical Compatibility Chart

PTFE PTFE/SiliconePTFE/

Silicone/PTFE*PTFE/

Red Rubber Viton PTFE/ButylAcetonitrile 3 3 3 3 3

Hydrocarbons (hexane, heptane, methane) 3 3 3 3

Methanol 3 3 3 3 3

Benzene 3 3 3

THF 3 3

Toluene 3 3

DMF 3 3 3 3

DMSO 3 3 3 3

Ether 3 3 3

Chlorinated Solvents (methylene chloride) 3 3 3

Alcohols (ethanol) 3 3 3 3 3 3

Acetic Acid 3 3 3 3

Acetone 3 3 3

Phenol 3 3 3 3 3

Cyclohexane 3 3 3 3

*PTFE/silicone/PTFE has the same chemical compatibility of PTFE ONLY UNTIL PUNCTURED



Vial Cap and Septum Compatibility

Thin PTFE PTFE/Silicone*PTFE/

Silicone/PTFE*PTFE/

Red Rubber Viton Butyl

High Performance

SeptaTemperaturerange Up to 260 °C -40 °C to 200 °C -40 °C to 200 °C -40 °C to 90 °C -40 °C to 260 °C -50 °C to 150 °C Up to 300 °C

for up to 1 hourUse formultipleinjections

No Yes Yes No No No Yes

Price Very economical Economical Most expensive Very economical Economical Economical More expensiveResistance tocoring None Excellent Excellent None None None Excellent

Recommendedfor storage No Yes Yes No No No No

Best for Superiorchemical

inertness, shortcycle times,and singleinjections

Most commonHPLC and GC

analyses, not asresistant to

coring as P/S/P

Superiorperformance for

ultra traceanalysis, repeat

injections,internal

standards

Chlorosilanes,more economicaloption for single

injections

Chlorinatedsolvents, highertemperatures

Organicsolvents,

acetic acids;impermeable

to gases

High temperatureheadspaceapplications

*Agilent CrossLab silicone is platinum cured (versus peroxide cured), making it more inert and less likely to interact with samples



CrossLab Screw Top Vials and ClosuresCombine the excellent autosampler handling of a crimp cap profile with the ease of a screw cap.CrossLab screw caps and precision-fit septa give a secure seal with microvolume inserts.

2 mL Wide Opening (9 mm) Screw Top Vials and Closures• 2 mL, 12 x 32 mm, 9 mm diameter• Available in unique packaging designed to reduce vial breakage• Wider opening prevents syringe problems• Unique thread design for consistently secure seal• Precision-formed neck for optimal robotic arm handling• Optional ceramic write-on spot with fill marks

2 mL Wide Opening (9 mm) Screw Top Glass Vials

Description UnitAgilent CrossLabPart No.

Clear 100/pk 8010-0015Clear, write-on spot 100/pk 8010-0014

1000/cs 8010-0175Amber 100/pk 8010-0017Amber, write-on spot 100/pk 8010-0016

1000/cs 8010-0176Screw Top Vials with Fixed InsertsClear, 300 µL insert volume 100/pk 8010-0008Amber, 300 µL insert volume 100/pk 8010-0009

Clear, 2 mL wide opening (9 mm) screw topglass vials, 8010-0015

Wide opening screw top vials with write-onspot, 8010-0014

To obtain an optimal fit and seal of any vial and closure, we strongly recommend buying an entire CrossLab vial assembly(including a vial, cap, and septum, as well as a vial insert if needed). Please avoid mixing and matching any CrossLab vialswith any other brand of closures, or any CrossLab closures with any other brand of vials.

For additional help in selecting vials, caps, and septa, go to www.agilent.com/chem/SelectVials



Screw Caps for Wide Opening (9 mm) Vials

Color Septa Type UnitAgilent CrossLabPart No.

Blue PTFE/silicone 100/pk 8010-0086PTFE/silicone/PTFE 100/pk 8010-0087Pre-slit PTFE/silicone 100/pk 8010-0078Bonded PTFE/silicone 100/pk 8010-0077PTFE lined 100/pk 8010-0080Open top, no septa 100/pk 8010-0079

Red PTFE/silicone 100/pk 8010-0088PTFE/silicone/PTFE 100/pk 8010-0089Pre-slit PTFE/silicone 100/pk 8010-0082Bonded PTFE/silicone 100/pk 8010-0081Open top, no septa 100/pk 8010-0083

Orange PTFE/silicone 100/pk 8010-00841000/cs 8010-0186

PTFE/silicone/PTFE 100/pk 8010-00851000/cs 8010-0187

Pre-slit PTFE/silicone 100/pk 8010-0075Bonded PTFE/silicone 100/pk 8010-0074Open top, no septa 100/pk 8010-0076

Septa for Wide Opening (9 mm) Screw Caps

Septa Type Color UnitAgilent CrossLabPart No.

PTFE/red silicone Ivory 100/pk 8010-0093PTFE/white silicone/red PTFE Red 100/pk 8010-0091

1000/cs 8010-0188Pre-slit PTFE/white silicone Blue 100/pk 8010-0094PTFE/white silicone Red 100/pk 8010-0092

Orange screw caps with PTFE/silicone septafor wide opening (9 mm) vials, 8010-0084

Septa for wide opening screw caps, 8010-0094




2 mL Wide Opening (9 mm) Screw Top Vial Convenience Packs, 100/pk

Vial Type Septa Type Cap Color


Clear Pre-slit PTFE/silicone Red 8010-0425Clear, write-on spot PTFE/silicone Orange 8010-0198Clear, write-on spot Pre-slit PTFE/silicone Orange 8010-0542Clear, write-on spot, 300 µL insert volume PTFE/silicone Orange 8010-0545Clear, write-on spot, 300 µL insert volume Pre-slit PTFE/silicone Orange 8010-0547Amber, write-on spot PTFE/silicone Orange 8010-0199Amber, write-on spot Pre-slit PTFE/silicone Orange 8010-0543Amber, write-on spot, 300 µL insert volume PTFE/silicone Orange 8010-0546Amber, write-on spot, 300 µL insert volume Pre-slit PTFE/silicone Orange 8010-0548

CrossLab vial kit, screw top, clear with write-on spot,

300 µL insert volume, orange cap, pre-slit PTFE/silicone septa, 8010-0547





2 mL Standard Opening (8 mm) Screw Top Vials and Closures• 2 mL, 12 x 32 mm, 8 mm diameter• 8-425 thread design• Optional ceramic write-on spot with fill marks

2 mL Standard Opening (8 mm) Screw Top Glass Vials

Description Unit


Clear 100/pk 8010-0011Clear, write-on spot 100/pk 8010-0010Amber 100/pk 8010-0013Amber, write-on spot 100/pk 8010-0012Clear 2 mL standard opening (8 mm)

screw top glass vials, 8010-0011

2 mL Standard Opening (8 mm) Screw Top Glass Vial Convenience Packs

Vial Type Septa Type Cap Color Unit


Clear PTFE/silicone Black 100/pk 8010-0414Clear PTFE/butyl Black 100/pk 8010-0426Clear, 100 µL insert volume PTFE/butyl Black 100/pk 8010-0427Amber PTFE/silicone Black 100/pk 8010-0415





Screw Caps for Standard Opening (8 mm) Vials

Color Septa Type Unit


Blue PTFE/silicone 100/pk 8010-0061Pre-slit PTFE/silicone 100/pk 8010-0062PTFE/silicone/PTFE 100/pk 8010-0063PTFE/butyl 100/pk 8010-0064Open top, no septa 100/pk 8010-0065

Red PTFE/silicone 100/pk 8010-0066Pre-slit PTFE/silicone 100/pk 8010-0067PTFE/silicone/PTFE 100/pk 8010-0068PTFE/butyl 100/pk 8010-0069Open top, no septa 100/pk 8010-0070

Orange PTFE/silicone 100/pk 8010-0056Pre-slit PTFE/silicone 100/pk 8010-0057PTFE/silicone/PTFE 100/pk 8010-0058PTFE/butyl 100/pk 8010-0059Open top, no septa 100/pk 8010-0060

Black PTFE/silicone 100/pk 8010-0054Open top, no septa 100/pk 8010-0055

Flanged Caps (Compatible with Shimadzu Autosamplers)Orange Flanged, PTFE/silicone 100/pk 8010-0141

Flanged, pre-slit PTFE/silicone 100/pk 8010-0142Flanged, no septa 100/pk 8010-0166

Septa for Standard Opening (8 mm) Vials

Septa Type Unit


Red PTFE/white silicone/red PTFE 100/pk 8010-0071Red PTFE/white silicone 100/pk 8010-0072PTFE/butyl 500/pk 8010-0073

Orange screw caps with PTFE/silicone septafor standard opening vials, 8010-0056




4 mL (13 mm) Screw Top Vials and Closures• 4 mL, 15 x 45 mm• Compatible with WISP 48 style autosamplers• Precision-formed screw threads (13 x 425) for consistently secure seal• Can be used as wash, waste, or storage vials

4 mL (13 mm) Screw Top Glass Vials

Description Unit


Clear 100/pk 8010-0020Amber 100/pk 8010-0021

Black screw caps with red PTFE/siliconesepta for 4 mL (13 mm) vials, 8010-0095


Screw Caps for 4 mL (13 mm) Vials

Color Septa Type Unit


Black Red PTFE/silicone 100/pk 8010-0095Open top, no septa 100/pk 8010-0096



Septa for 4 mL (13 mm) Vials

Septa Type Unit


Red PTFE/white silicone 100/pk 8010-0098White PTFE 100/pk 8010-0099Pre-slit PTFE/silicone 100/pk 8010-0557


4 mL (13 mm) Screw Top Vial Convenience Packs, 100/pk

Vial Type Septa TypeCapColor


Clear PTFE/silicone Black 8010-0553Clear Pre-slit PTFE/silicone Black 8010-0555Clear, 250 µL insert volume PTFE/silicone Black 8010-0559Clear, 250 µL insert volume Pre-slit PTFE/silicone Black 8010-0561Amber PTFE/silicone Black 8010-0554Amber Pre-slit PTFE/silicone Black 8010-0556Amber, 250 µL insert volume PTFE/silicone Black 8010-0560Amber, 250 µL insert volume Pre-slit PTFE/silicone Black 8010-0562

CrossLab vial kit, screw top, clear, 250 µL insert volume, black cap,

pre-slit PTFE/silicone septa, 8010-0561




6 mL (16 mm) Screw Top Vials and Closures


Description Unit


Clear 100/pk 8010-0022

Screw caps for 6 mL (16 mm) vials

Septa Type Unit


PTFE/silicone 100/pk 8010-0101Pre-slit PTFE/silicone 100/pk 8010-0102Open top, no septa 100/pk 8010-0100

Screw caps for 6 mL (16 mm) vials





10 mL (22 mm) Screw Top Vials and Closures


Description Unit


Clear 100/pk 8010-0563

Screw Caps for 10 mL (22 mm) Vials

Septa Type Color Unit


No septa Black 100/pk 8010-0565

Septa for 10 mL (22 mm) Vials

Septa Type Unit


PTFE/silicone 100/pk 8010-0564

CrossLab vial, screw top, 10 mL, 22 mm,clear, 8010-0563




CrossLab Crimp Top Vials and ClosuresThe wide opening crimp cap provides a larger target area for improved autosampler needle accuracy.Select from a variety of cap colors and septa. Whatever your crimp top vial needs, Agilent has whatyou are looking for.

2 mL (11 mm) Crimp Top Vials and Closures• 2 mL, 12 x 32 mm• Available in unique packaging designed to reduce vial breakage• Tightly controlled crown for improved crimping• Precision-formed neck for improved autosampler handling• Rigorous quality assurance provides dimensional accuracy from lot to lot• Optional ceramic write-on spot with fill marks

2 mL (11 mm) Crimp Top Glass Vials

Description Unit



1000/cs 8010-0170Amber, write-on spot 100/pk 8010-0003

1000/cs 8010-0172Crimp Top Vials with Fixed InsertsClear, 300 µL insert volume 100/pk 8010-0006Amber, 300 µL insert volume 100/pk 8010-0007

Crimp top glass vials with write-on spot,8010-0001

TIPS & TOOLSAgilent offers ergonomic manual crimpers and decappers, designed to significantly reducehand strain. Electronic versions are also available, featuring a longer life battery designed forquick, powerful use. For more information, please visit www.agilent.com/chem/crimper




Crimp Caps with 11 mm Septa

Cap Color Septa Type Unit


Silver aluminum PTFE/silicone/PTFE 100/pk 8010-00491000/cs 8010-0182

PTFE/silicone 100/pk 8010-00501000/cs 8010-0183

Pre-slit PTFE/Silicone 100/pk 8010-0582PTFE/butyl 100/pk 8010-0051Thin membrane rubber 25/pk 8010-0053PTFE/red rubber 100/pk 8010-0045

1000/cs 8010-0181Blue aluminum PTFE/red rubber 100/pk 8010-0046Green aluminum PTFE/red rubber 100/pk 8010-0047Red aluminum PTFE/red rubber 100/pk 8010-0048Gold aluminum Magnetic 100/pk 8010-0052

Magnetic crimp caps, 8010-0052

TIPS & TOOLSRed rubber septa have a tendency to cause needle sticking during sampling and are more likely to core. Agilent recommends using siliconesepta as a higher quality alternative to prevent contamination and issues related to septa coring.







CrossLab crimp top vial kit, amber with write-on spot, 3000 µL insert volume,

conical with feet, silver aluminum cap, pre-slit PTFE/silicone septa, 8010-0569

2 mL (11 mm) Crimp Top Vial Convenience Packs, 100/pk

Vial Type Septa Type Cap Color


Clear, write-on spot PTFE/silicone Silver aluminum 8010-0195Clear, write-on spot, 300 µL insert volume,conical with feet

PTFE/silicone Silver aluminum 8010-0566

Clear, write-on spot, 300 µL insert volume,conical with feet

Pre-slit PTFE/silicone Silver aluminum 8010-0568

Amber, write-on spot PTFE/silicone Silver aluminum 8010-0196Amber, write-on spot, 300 µL insert volume,conical with feet

PTFE/silicone Silver aluminum 8010-0567

Amber, write-on spot, 300 µL insert volume,conical with feet

Pre-slit PTFE/silicone Silver aluminum 8010-0569




Crimp Top Micro VialsAgilent CrossLab offers a selection of crimp top micro vials designed for a variety of autosamplers,including HTS and HTC PAL systems, to cope with today's high-throughput LC/MS demands.Additionally, Agilent CrossLab crimp top micro vials work seamlessly with CombiPAL and GC PALmagnetic needle guides and barcode readers.

Amber, flat bottom crimp top micro vials,8010-0153

Crimp Top Micro Vials

Description Volume Unit


Amber, flat bottom 0.8 mL 1000/cs 8010-0153Clear, tapered bottom 0.1 mL 500/pk 8010-0154Clear, rounded bottom 0.3 mL 500/pk 8010-0155Micro CapsCrimp caps with PTFE/silicone septa, 8 mm 500/pk 8010-0516



CrossLab Snap Top Vials and ClosuresSnap top vials and caps are the simple, efficient way to a secure seal without crimping. It's as easy aspush-on, pull-off. Crimp caps can also be used with wide opening snap top vials.

Note: Snap cap vials cannot be pressurized.

2 mL (11 mm) Snap Top Vials and Closures• 2 mL, 12 x 32 mm• Use with any 11 mm snap or crimp cap• Available in unique packaging designed to reduce vial breakage• Precision-formed neck improves autosampler handling• Optional ceramic write-on spot

2 mL (11 mm) Snap Top Glass Vials

Description Unit



1000/cs 8010-0177Amber 100/pk 8010-0026Amber, write-on spot 100/pk 8010-0025

1000/cs 8010-0178Snap top vials with write-on spot,

8010-0025





Snap Caps with 11 mm Septa



Clear PTFE/red silicone 100/pk 8010-0104PTFE/silicone/PTFE 100/pk 8010-0105Pre-slit PTFE/white silicone 100/pk 8010-0106Clear polyethylene membrane 100/pk 8010-0107

Blue PTFE/red silicone 100/pk 8010-0108PTFE/white silicone 100/pk 8010-0112

Green PTFE/red silicone 100/pk 8010-0109Orange PTFE/red silicone 100/pk 8010-0103

PTFE/red silicone 1000/cs 8010-0189PTFE/white silicone 100/pk 8010-0111Pre-slit PTFE/white silicone 1000/cs 8010-0190Pre-slit PTFE/white silicone 100/pk 8010-0113

Red PTFE/red silicone 100/pk 8010-0110Polyurethane 100/pk 8010-0115

Orange snap caps with PTFE/red silicone 11 mm septa, 8010-0103

2 mL (11 mm) Snap Top Vial Convenience Packs



Clear, write-on spot PTFE/silicone Orange 100/pk 8010-0200Amber, write-on spot PTFE/silicone Orange 100/pk 8010-0411




Snap Top Solvent Vial Convenience Packs



Snap Top Solvent Vial Convenience Packs



5 mL Snap Top Solvent Vial Convenience PackClear PTFE/silicone Clear 100/pk 8010-041610 mL Snap Top Solvent Vial Convenience PackClear Red PTFE/white silicone Clear 100/pk 8010-0422

Snap Cap for 5 mL and 10 mL Solvent Vials



Clear PTFE/silicone 50/pk 8010-0423



CrossLab vial, snap top shell vial, 1 mL, 8 mm,clear, with polypropylene cap, 8010-0574

CrossLab vial, snap top shell vial, 1 mL, 8 mm,amber, with polypropylene cap, 8010-0575

19 mm Septa for 5 mL and 10 mL Snap Caps

Septa Type Unit


Red rubber 100/pk 8010-0430

1 mL (8 mm) Snap Top Shell Vial Convenience Packs, 100/pk

Vial Type Cap


Clear Polypropylene 8010-0574Amber Polypropylene 8010-0575




CrossLab Polypropylene VialsWide opening 12 x 32 mm vials are manufactured from virgin polypropylene, meeting therequirements of 21 CFR 177.1520. Polypropylene vials are translucent and can be used with crimp orsnap caps.

Polypropylene Vials

DescriptionRecommendedFill Volume

Max FillVolume Unit


Polypropylene, crimp/snap top 250 µL 440 µL 100/pk 8010-0158Polypropylene, crimp/snap top 250 µL 440 µL 1000/cs 8010-0193Polypropylene, crimp/snap top 0.7 mL 1 mL 100/pk 8010-0159Polypropylene, screw top 250 µL 440 µL 100/pk 8010-0161Polypropylene, screw top 250 µL 440 µL 1000/cs 8010-0194Polypropylene with glass insert, crimp/snap top

250 µL 350 µL 100/pk 8010-0160

Polypropylene with glass insert, screw top 250 µL 350 µL 100/pk 8010-0162

CrossLab polypropylene vial, crimp/snap top,8010-0158

Polypropylene crimp/snap top vial with glassinsert, 8010-0160




CrossLab Micro-V Vials• Wide opening, 1.5 mL vials with low residual volume• Made from first hydrolytic glass Type 1• Standard 12 x 32 mm dimension• Compatible with 11 mm crimp closures

Micro-V VialsDescription Unit Screw Top Crimp Top Snap TopClear, screw top 100/pk 8010-0018 8010-0004 8010-0027Amber 100/pk 8010-0019 8010-0005 8010-0028



TIPS & TOOLSFor economical and effectivemicrosampling, choose thepolypropylene vial with molded glassflanged insert. Its polypropylenebody has a glass flanged insertmolded to the inside, so the samplecomes in contact only with the highquality glass insert and the septum.

Clear, crimp top Micro-V vial, 8010-0004



Microvolume inserts

250 µL conical insert with polymer feet,8010-0131

250 µL pulled-point glass insert, 8010-0132

400 µL flat bottom glass insert, 8010-0136



CrossLab Microvolume InsertsTo meet your microsampling needs, Agilent offers a variety of microvolume inserts with capacities and designs that can transform your vials from full-capacity to limited volume with one simple step.

Microvolume Inserts for 8 mm Screw Top Vials


MaxFill Volume Unit


Glass conical insert with polymer feet 150 µL 200 µL 100/pk 8010-0124Glass pulled-point insert 150 µL 200 µL 100/pk 8010-0125Flat bottom insert 200 µL 250 µL 100/pk 8010-0126

Microvolume Inserts for 11 mm Crimp Top or 9 mm Screw Top Vials


MaxFill Volume Unit


Conical insert with polymer feet 250 µL 350 µL 100/pk 8010-0131Pulled-point insert 250 µL 350 µL 100/pk 8010-0132Flat bottom insert 400 µL 440 µL 500/pk 8010-0136

Microvolume Inserts for 4 mL (13 mm) Screw Top Vials


MaxFill Volume Unit


Conical insert with polymer feet 250 µL 350 µL 100/pk 8010-0131Pulled-point insert with flange 250 µL 350 µL 100/pk 8010-0558



CrossLab Well Plates and Sealing MatsAgilent CrossLab offers a range of polypropylene 96-well or 384-well plates with a variety of sealing options for collection of samples, storage,and use in autosamplers.

96-well plate with removable sealing mat,

8010-0534 Sealing mat for 2 mL 96-well plate,Ethylene Vinyl Acetate (EVA),

8010-0537

Sealing mat for 0.2 mL 96-wellplates, Thermoplastic Elastomers

(TPE), 8010-0577

Well Plates

DescriptionWell Volume

(mL) Material

PlateHeight(mm)

Well Depth (mm) Well Shape Bottom Shape Unit


96-well plate 0.2 Polypropylene 20.9 20.9 Round Conical 50/pk 8010-053296-well plate 0.5 Polypropylene 26.5 21.6 Round Round 56/pk 8010-053396-well plate 1.0 Polypropylene 39.1 37.1 Round Round 32/pk 8010-053496-well plate 2.0 Polypropylene 44 41.85 Round Round 32/pk 8010-0536384-well plate 0.1 Polypropylene 14.4 11.7 Square Round 120/pk 8010-0538384-well plate 0.25 Polypropylene 22 19.5 Square Round 60/pk 8010-0539

Sealing Mats and Accessories

Description Unit


Sealing mat for 0.2 mL 96-well plates, Thermoplastic Elastomers (TPE) 5/pk 8010-0577Sealing mat for 0.5 mL and 1.0 mL 96-well plates, Thermoplastic Elastomers (TPE) 50/pk 8010-0535Sealing mat for 2 mL 96-well plate, Ethylene Vinyl Acetate (EVA) 50/pk 8010-0537Sealing tape for 384-well plate, Polyethylene 100/pk 8010-0540Sealing foil, self adhesive, high transparency, for all plates, Polyethylene Terepthalate (PET) 100/pk 8010-0541Sealing foil, self adhesive, for all plates, Polypropylene 100/pk 8010-0578



CrossLab Vials Cross Reference ListThe cross references to the original equipment manufacturer (OEM) part numbers listed here serve as a recommendation that the CrossLabproducts are viable alternatives to OEM products. CrossLab products are compatibile with the corresponding OEM instruments, although in somecases, the CrossLab products may have slightly different designs as compared to the OEM counterparts.

(Continued) (Continued) (Continued)

CrossLab Vials for Bruker/VarianSimilar toBruker/VarianPart No.


392611525 8010-0195392611530 8010-0414392611549 8010-0198392611550 8010-0199392611593 8010-0125190010204392611594392620538

8010-0131

392611596392611636

8010-0132

392611607 8010-0143392611607 8010-0413392611613 8010-0142392611613 8010-0412392611631 8010-0050392611632 8010-0051390886500392611634

8010-0002

392611639392620550CP10271

8010-0011

392611640 8010-0013392611641 8010-0056392611641 8010-0061392611645 8010-0064392611641 8010-0066

392611645 8010-0059392611645 8010-0069392611646392611653

8010-0015

392611654 8010-0017392611659 8010-0084392611659 8010-0086392611659 8010-0088392611667 8010-0159392611675392612021MLA202100

8010-0034

392611857 8010-0151392610003392611858ROK7382420

8010-0116

392611859 8010-0121392611871 8010-0108



392611970392611974392611975392611980392611981392611982

8010-0416

392620104 8010-0040392620202 8010-0042

392620204 8010-0044392620302392620304

8010-0139

392620306 8010-0140392620401392620403

8010-0417

392620500CPLC40111BCPLC40111R

8010-0175

190010209392620510

8010-0092

190010209392620510

8010-0093

392620514 8010-0008392620517 8010-0170392620526 8010-0032392620528 8010-00361600069800 8010-00703906149016900016900R005486RT1

8010-0072

CP10204 8010-0029CP10205 8010-0033CP10277 8010-0020CP741315CP913323

8010-0038

CP912446CP913077

8010-0418

CP959464 8010-0420CP959485 8010-015539260500CPLC40111BCPLC40111R

8010-0014

CPLCL07CPVA 8010-0172CPLCL11ACBST144 8010-0183MLA110040M 8010-0152



392611860392612017MLA2000051ML

8010-0165

MLA21000 8010-0030R000548SCY 8010-0160

Similar toBruker/VarianPart No.


CrossLab Vials for Bruker/Varian



(Continued)

CrossLab Vials for PerkinElmerSimilar toPerkinElmerPart No.


B0104239 8010-0143B0104241 8010-0144B4000022 8010-0122B4000025 8010-0121N6356478 8010-0030N6356479 8010-0038N9300500 8010-0195N9300700 8010-0198N9301385 8010-0002N9302680 8010-0003N9302684 8010-0047N9302685 8010-0048N9302686 8010-0046N9303416 8010-0106N9303416 8010-0113N9303417 8010-0105N9303417 8010-0112N9303418 8010-0024N9303419 8010-0104N9303419 8010-0111N9303441 8010-0055N9303442 8010-0073N9303992 8010-0413N9306015 8010-0051N9306052 8010-0054N9306075 8010-0042N9306077 8010-0119N9306079 8010-0034N9306201 8010-0015N9306202 8010-0086N9306207 8010-0023N9306208 8010-0025N9306220 8010-0017N9306228 8010-0050N9306229 8010-0049N9306240 8010-0152N9306247 8010-0020

CrossLab Vials for ShimadzuSimilar toShimadzuPart No.


038-00165-06 8010-0011220-90384-00 8010-0055220-90393-00 8010-0020220-90394-00 8010-0096220-91521-14 8010-0095220-94562-00 8010-0412220-94563-00 8010-0413220-94796-01 8010-0042220-94796-02 8010-0119220-94796-07 8010-0038221-34271-92 8010-0054221-34271-92 8010-0056221-34271-92 8010-0072228-21290-91 8010-0098228-45450-91 8010-0198228-45452-91 8010-0199

60180-507 8010-000810-800-247 8010-003814-824-365 8010-004260180-502C4011-1W2-CV11 09 0476

8010-0001

60180-50410-800-246

8010-0030

60180-50514-824-360

8010-0032

60180-506 8010-003460180-507 8010-000860180-508 8010-001060180-509C4000-1W2SVW11 09 0519

8010-0014

60180-510C4015-14-SV13 09 0222

8010-0020

60180-511 8010-011660180-513 8010-011760180-514 8010-005560180-514 8010-006060180-514 8010-006560180-514 8010-007060180-515 8010-006160180-516 8010-008660180-52160180-522

8010-0122

60180-526 8010-004660180-560 8010-001260180-561C4000-2W2SVW(A)11 09 0520

8010-0016

60180-562 8010-006660180-597 8010-019560180-599 8010-019860180-713 8010-0112C4013-98Y 8010-0166

Similar toThermo ScientificPart No.


CrossLab Vials for Thermo Scientific

Similar toThermo ScientificPart No.


CrossLab Vials for Thermo Scientific

CrossLab Vials for WatersSimilar to WatersPart No.


186000842 8010-0557186001420 8010-0563186001421 8010-0565186001422 8010-0564186000307C 8010-0542186000838C 8010-0553186000839C 8010-0555186000847C 8010-0543186001133C 8010-0554186001134C 8010-0556WAT025053C 8010-0575WAT025054C 8010-0574



The electrodes shown here use universal connections, so you can use them interchangeably on a wide range of popular benchtop meters.

8010-0985 8010-0986 8010-0972 8010-0975 8010-0973ü Combination electrode

with glass bodyü Refillable

ü BNC connectorü Glass bulb measuring tip

ü Combination electrodewith PC bodyü Refillable

ü BNC connectorü Flat measuring tip

ü Combination electrodewith PC body

ü Non-refillableü BNC connector

ü Glass bulb measuring tip

ü Combination electrodewith ABS body

ü Non-refillableü BNC connector

ü Spear-tipped measuring tip

ü Electrode with glass bodyü Non-refillableü BNC connector

ü Glass bulb measuring tip

CrossLab pH Electrodes

93


www.agilent.com/chem/CrossLabElectrochemistry

Agilent CrossLab pH Electrodes – Applications and Compatibility TableOriginal EquipmentManufacturer(OEM) OEM pH Meter Application

Similar toOEM Electrode

CrossLab Electrode Description


Mettler Toledo SevenMultiSevenCompactFiveEasyFiveEasy Plus

Routine measurement of mostsamples, field measurement and student/education use.Recommended for biological samples,such as buffers, and proteins enzymes

InLab BasicsBNC

Refillable pH combinationelectrode with glass body

8010-0985

InLab Routine

Measurements that may damage the lifetime of the electrode, such as corrosive or organic samples

InLab Mono Non-refillable pH electrodewith glass body

8010-0973

Fruit, cheese, meat and other solid measurements

InLab Solids Non-refillable pHcombination electrode with ABS body

8010-0975

Routine measurement of most samplesin harsher environments, such as fieldor plant use

LE407 Non-refillable pHcombination electrode with PC body

8010-0972InLab Easy

Flat surface samples such as skin,paper, leather, etc.

InLab Surface Refillable pH combinationelectrode with PC body

8010-0986

ThermoScientific

Orion Star A111Orion Star A211Orion VERSASTAR 10Orion 3-StarOrion 4-Star

Routine measurement of mostsamples, field measurement and student/education use.Recommended for biological samples,such as buffers, and proteins enzymes

8102BNUWP Refillable pH combinationelectrode with glass body

8010-0985


8163BNWP Non-refillable pHcombination electrode with ABS body

8010-0975


9156APWP Non-refillable pHcombination electrode with PC body

8010-0972

HANNAInstruments

HI 2221 Routine measurement of mostsamples, field measurement andstudent/education use. Recommendedfor biological samples, such as buffers,and proteins enzymes

Refillable pH combinationelectrode with glass body

8010-0985


Non-refillable pHcombination electrode with ABS body

8010-0975


Non-refillable pHcombination electrode with PC body

8010-0972

Flat surface samples such as skin,paper, leather, etc.

Refillable pH combinationelectrode with PC body

8010-0986

To learn more about CrossLab electrodes and a full range of CrossLab pH buffers, visit www.agilent.com/chem/CrossLabElectrochemistry.

Key DescriptionPC PolycarbonateABS Acrylonitrile Butadiene Styrene



CrossLab pH Electrode Specifications

Model 8010-0985 8010-0986 8010-0972 8010-0975 8010-0973Measurement Range (0-14) pH (0-14) pH (0-14) pH (0-14) pH (0-14) pHPTS ≥ 97% ≥ 97% ≥ 97% ≥ 97% ≥ 98.5%Response time 30s 60s 30s 60s 60sElectrode impedence ≤ 300 MW ≤ 500 MW ≤ 300 MW ≤ 500 MW ≤ 250 MWReference type Ag/AgCl Ag/AgCl Ag/AgCl Ag/AgCl –Liquid junction material Ceramic Fiber Porous polymer Fiber –

CrossLab pH Electrode Recommended Uses*

Industry Sample 8010-0985 8010-0986 8010-0972 8010-0975 8010-0973Drinks and Dairyproducts

Milk 3 3 3

Soy Sauce 3 3 3

Beer 3 3 3

Soft drinks (iced black tea)

3 3 3

Food andAgriculturalproducts

Compoundfertilizer

3

Jam 3

Meat 3

Vegetables 3 3 3

Waste 3

Chemicalreagents andelectrolytes

Electroplate liquid 3 3

Coatings,dyes, and latex

Suspended solid(soil)

3

Daily water Tap water 3 3

Drinking water(barreled water)

3

(Static)Distilled water 3

(Sealed)Drug orbiologicalsamples

Proteinsample/proteinpowder

3 3

Surfacemeasurement

Droplet size of the sample

3

Textiles 3

Cosmeticsand viscoussamples

Shampoo 3 3

Cosmetics paste 3 3

*Laboratory test; for reference only.

Refillable pH combination electrode with glass body, 8010-0985

95


www.agilent.com/chem/CrossLabElectrochemistry

CrossLab pH Electrodes*

Description


Refillable pH combination electrode with glass body, and 30 mL pH reference solution 8010-0985Refillable pH combination electrode with Polycarbonate (PC) body, and 30 mL pHreference solution

8010-0986

Non-refillable pH combination electrode with Polycarbonate (PC) body 8010-0972Non-refillable pH combination electrode with Acrylonitrile Butadiene Styrene (ABS) body

8010-0975

Non-refillable pH electrode with glass body 8010-0973*All CrossLab pH electrodes are shipped with a certificate of conformance and the certificate is also available onlinein the literature library, www.agilent.com/chem/library.

CrossLab pH Buffer and Reference Solutions*

Description Amount


pH buffer solutions, 4.01, 7.00, 10.01, NIST traceable 3 x 250 mL 8010-0976pH buffer solutions, 4.00, 6.86, 9.18, GB traceable 3 x 250 mL 8010-0977pH buffer, 4.01 3 x 250 mL 8010-0978pH buffer, 10.01 3 x 250 mL 8010-0979pH buffer, 7.00 3 x 250 mL 8010-0980pH buffer, 4.00 3 x 250 mL 8010-0981pH buffer, 6.86 3 x 250 mL 8010-0982pH buffer, 9.18 3 x 250 mL 8010-0983Reference solution, pH 3 x 30 mL 8010-0984*All CrossLab pH buffer and reference solutions are shipped with a certificate of analysis and are also available on-line in the literature library, www.agilent.com/chem/library.



CrossLab Supplies Online Interactive Selection Tool

With the CrossLab Selection Tool, it is quick and simple to identify the specific supplies you need.Answer just a few questions, and you will find the HPLC supplies for your particular applications.The tool is available in English, Chinese, and Japanese.

Learn more atwww.agilent.com/chem/SelectCrossLab

1

27

42

49

64

65

89

Agilent CrossLab Selection Guide for HPLC & Electrochemistry Systems

Table of Contents







CrossLab Well Plates and Sealing Mats


92

Agilent designs and manufactures columns to suit mosttechniques for small molecule, biomolecule and syntheticpolymer analysis, allowing you to scale methods fromconventional 5 µm… to “Fast LC” sub-2 µm… to prep.You have access to Agilent’s extensive applicationslibrary for faster method development – plus worldwidetechnical support, speedy problem resolution, our globalinfrastructure, and delivery network.Agilent’s meticulous production oversight ensurescolumn consistency and performance. With more than40 years of experience in producing polymers and silicachemistries, our team is committed to continuouslydeveloping new column advances that make you most productive.

Learn more atwww.agilent.com/chem/sampleprep

Learn more atwww.agilent.com/chem/lccolumns

Agilent Bond Elut SPE, Bond Elut QuEChERS and Captiva Filtration Sample Prep family of productsoffer the widest range of solutions for every level of sample cleanliness to help you increase throughputand increase the quality of your data.

CrossLab Supplies for Dionex HPLC Systems*

Simplify your workflow with Captiva Filtration Family of ProductsMaximize the benefits of Captivawith these additional products

The Agilent LC Columns Family: Choice, control and assured excellent results

Supplies Selection Guide for HPLC and Electrochemistry Systems

Agilent CrossLab HPLC works with WATERS SHIMADZU THERMO SCIENTIFIC AND MORE

For more information

Learn more:www.agilent.com/chem/CrossLabHPLCwww.agilent.com/chem/CrossLabElectrochemistry

Buy online:www.agilent.com/chem/store

U.S. and [email protected]

[email protected]

Asia [email protected]

[email protected]

2013 EDITION

Put Agilent quality supplies to work across your lab

Agilent CrossLab Selection Guide for HPLC & Electrochemistry System

s

CrossLabAgilent

Information, descriptions, and specifications in thispublication are subject to change without notice.© Agilent Technologies, Inc. 2014Printed in Canada March 27, 20145991-1484EN

supplies selection guide for hplc and electrochemistry systems

Documents