supply and delivery of one (1) unit of new...
TRANSCRIPT
SUPPLY AND DELIVERY OF ONE (1) UNIT OF NEW DUAL CAB PICK-UP TO DEWAN BANDARAYA KUCHING UTARA
TABLE OF CONTENTS
Section Descriptions Page No. Section A Conditions of Tendering A/1 – A/6 Section B Form of Tender B/1 – B/2
Appendix To Conditions of Contract For Supply of Plant, Vehicles And Equipment
Surat Akuan Pembida Section C Conditions of Tendering For Supply of Plant, Vehicles and Equipment C/1 – C/4
Section D Conditions of Contract for Supply of Plant, Vehicles and Equipment D/1 – D/8 Section E Special Specification E/1 – E/8
Section F Environmental Specification 1 – 5 Section G Integrated Management System Policy 1
Section H Appendices:- Appendix A - Schedule of Price APA/1 – APA/2
Appendix B - Duty Free Price Component APB/1
Appendix C - Schedule of Technical Data APC/1 – APC/4
Appendix D - List of Tools Supplied With Each Vehicle APD/1
Appendix E - Sample Spare Part Prices (Engine) APE/1 – APE/2
Appendix F - Sample Spare Part Prices (Vehicle) APF/1 – APF/2
Appendix G - Fuel Consumption and Routine Maintenance Cost APG/1– APG/2 Assessment
Appendix H - Training/Technical Back-Up Service APH/1
Appendix I - Inspection API/1
Section I Financial and Technical Information of Tenderer:-
Attachment 1 Attachment 2
Attachment 3 Attachment 4 Attachment 5
- - - -
-
Surat Pengakuan Kebenaran Maklumat dan Keesahan Dokumen yang Dikemukakan oleh Pentender Details of Tenderer Data-Data Kewangan Laporan Bank/Institusi Kewangan mengenai Kedudukan Kewangan Pentender. Laporan Penyelia Projek atas Prestasi Kerja (Bukan Projek DBKU) Semasa Pentender.
Appendix :-
Appendix I - Form Of Agreement Appendix II - Bank Guarantee Form For Performance Security
SPECIAL SPECIFICATION TITLE : SUPPLY AND DELIVERY OF ONE (1) UNIT OF NEW DUAL CAB PICK-UP
TO DBKU TENDER NO :
DBKU/CQS/S/13/16
COMPLIANCE WITH SPECIAL SPECIFICATION The tenderer must indicate whether his offer complies with the specification by writing "“YES"”or "NO" against the respective item of specification. If the answer is ‘No’ then appropriate comments must be given in the space provided.
No.
Description
Yes/No
Remarks
1. MINIMUM REQUIREMENTS
(a) (i) New robust long life reliable type dual cab pick-up or equivalent in current production complete with all standard and optional features and accessories, fittings and tools normally supplied with the vehicle irrespective whether or not specifically mentioned hereafter.
(ii) Specification sheet of pick-up must be submitted with tender.
(b) The vehicle to consist of a very strong and rigid metal chassis and an all metal body.
(c ) To be suitable for frequent use in off-the-road operations in very rough undulating country.
(d) The maker’s permissible gross vehicle weight to be not more than 2,910 kg.
(e) Wheelbase to be not more than 3,085 mm.
(f) To be mounted on two (2) axles with two (2) single wheels on front axle and two (2) single wheels on rear axle.
(g) Drive to be provided to rear axle and to front and rear axle two (2) wheel drive or four (4) wheel drive options.
(h) To be fitted with right hand steering control.
(i) To have a high ground clearance of not more than 286 mm.
(j) (k) (l) (m)
Pick-up must comply with requirements of Road Transport Department including provision for safety belts. The height shall not more than 1,815 mm and not less than 1770 mm. The width shall not more than 1,835 mm The length shall not more than 5,300 mm
- E/1-
SPECIAL SPECIFICATION (cont’d) TITLE : SUPPLY AND DELIVERY OF ONE (1) UNIT OF NEW DUAL CAB PICK-UP
TO DBKU TENDER NO :
DBKU/CQS/S/13/16
No.
Description
Yes/No
Remarks
2. ENGINE (a) Engine to be 4-Cylinder, In-line, 16Valve, DOHC Turbo
Diesel and intercooler or equivalent water cooled and electrical fuel injection delivery system. Low emission (below EURO pre-environment regulation) low noise and low fuel consumption (passed DOE requirement) or Certified with Green Diesel Engine.
(b) Piston displacement to be not less than 2,390 cc (c) (i) Power output to be not less than 110kW Nett
with all engine accessories drive. Engine to be rated at not less than 3400 rpm under standard conditions of 72.0 mm mean barometric pressure and 29°C mean atmospheric temperature.
(ii) Engine characteristic curves showing the relationship of kW torque and fuel consumption with engine speed duly certified by the engine manufacturer must be submitted with the tender.
(d) Heavy duty dry type air cleaner with protected crankcase breather both suitable for use in an atmosphere laden with dust.
(e) Full flow fuel and lubricating oil filters. (f) Pressurized cooling system with tropical radiator, water
pump, radiator fan and thermostat.
(g) Efficient exhaust silencer of robust construction.
(h) Engine instrumentation to comprise of:- (i) Oil pressure gauge or warning light; (ii) Water temperature gauge; (iii) Ammeter or battery conditioner; (iv) Fuel gauge
(i) Fuel tank of robust construction with captive filter cap and drain pug and to have a capacity of not less than 75 liters, and provide with fuel tank protector.
-E/2 –
SPECIAL SPECIFICATION (cont’d)
TITLE : SUPPLY AND DELIVERY OF ONE (1) UNIT OF NEW DUAL CAB PICK-UP
TO DBKU TENDER NO :
DBKU/CQS/S/13/16
No. Description Yes/No Remarks
3. CHASSIS , CAB AND BODY
(a) The chassis to be of extra rigid construction with all welded steel box section for longitudinal members and adequately braced with cross members to ensure absolute torsion and diagonal rigidity.
(b) All metal cab fitted with four side metal doors. Side doors fitted with electric power wind-down glass and provided with central locking system.
(c) Dual Cab pick-up to be provided with deep cushioned seats. The driver’s seat to be fully adjustable for reach, height and rake.
(d) The cab roof to be fitted with heat insulation.
(e) Cab to be provided with full width windscreen, with two (2) speed variable intermittent windshield wipers and washers.
(f) All body panels to be of non-corrosive alloy pressing or steel pressings specially treated against corrosion.
(g) Rigid front and rear bumper bar.
(h) Towing plate or hook at the front and the rear.
4. TRANSMISSION
(a) Heavy duty automatic transmission system forward.
(b) Heavy duty ancillary transfer gear box giving two (2) ratio, high ratio for two (2) or four (4) wheel drive and a low ratio for four (4) wheel drive.
(c) Selection for two (2) wheel drive, high ratio, four (4) wheel drive high ratio and four (4) wheel drive low ratio to be through levers located in the cab.
5. BRAKES
(a) To be hydraulically operated on four wheels.
(b) Braking effort to be proportional to pedal effort so that the driver retains the ‘feel’ of the brake.
(c) An independent parking brake (hand brake) capable of holding the vehicle on an incline of 1 in 4 to be fitted.
(d) To be fitted with load sensing Proportioning Valve and Electronic Brake Force Distribution.
(e) Brake to be ABS (antilock braking system).
- E/3 -
SPECIAL SPECIFICATION (cont’d)
TITLE : SUPPLY AND DELIVERY OF ONE (1) UNIT OF NEW DUAL CAB PICK-UP
TO DBKU TENDER NO :
DBKU/CQS/S/13/16
No. Description Yes/No Remarks
6. WHEELS AND TYRES
(a) Tyres to be heavy duty type with tread pattern suitable for off-the-road operations and fitted with tube.
(b) Tyre size to be not more than 265/65R17 or more steel belted radial both front and rear.
(c) A wheel tyre to be alloy construction.
(d) A spare wheel complete with tyre, tube and spare wheel carrier with holder to be provided.
7. ELECTRICAL SYSTEM
(a) To be 12 volt earth-return system and to be fully tropicalised
(b) Heavy duty battery with a capacity of not less than 60 ampere hour.
8. SAFETY AND SECURITY Vehicle to be supplied complete with the following:-
(a) NCap at least three (3) stars
(b) Dual SRS Airbags that protect the driver and passenger
(c) Touch screen audio system with reverse camera
(d) To be fitted with reverse sensor and security system (remote control, control unit and siren)
(e) Full bodykit by manufacturer
(f) Two (2) remote control keys and alarm system
9. RUNNING EQUIPMENT AND FITTING Vehicle to be supplied complete with the following:-
(a) Head lamps, side lamps, stop lamps, tail lamps number plate lamp and reflectors.
(b) Flashing direction indicators to be provided for front and rear.
(c) Wind tons horn.
(d) Heavy duty twin electric windscreen wipers.
(e) Windscreen washers.
(f) One (1) rear view mirror in cab and two (2) external rear-view mirrors.
(g) Speedometer in km/h and odometer in kilometer. - E/4 -
SPECIAL SPECIFICATION (cont’d)
TITLE : SUPPLY AND DELIVERY OF ONE (1) UNIT OF NEW DUAL CAB PICK-UP
TO DBKU TENDER NO :
DBKU/CQS/S/13/16
No. Description Yes/No Remarks
9. RUNNING EQUIPMENT AND FITTING (Cont’d) Vehicle to be supplied complete with the following:- (h) Stop lamp to be provided. (i) Dip switch and high beam indicator light. (j) Two sun visors. (k) Standard set of driver’s toolkit including jack and wheel
brace.
(l) Licence disc holder. (m) Front and rear mounted air-conditioning. (n) Front and rear Air Conditioning. (o) Fire extinguisher and first aid (p) One no of beacon light bar complete with speaker and
p.a system (amber colour or combined colour) to be fitted on roof top of the driver-cab and 5 years warranty on bulbs.
(q) To provide coil floor mate
(r) To supply and install Solar Control Window Film, V-KOOL Elite unto front windscreen, V-KOOL 55 both side windows and rear windscreen complete and approve by JPJ
10. PAINTING AND FINISH
(a) The sticker of the complete dual cab is to be decided by DBKU
(b) The complete vehicle shall be finished painted with standard manufactured metallic white colour
(c) The underside surfaces of body to be given a coat of anti- corrosive paint
11. AIR CONDITIONING
(a) Installation to be with rear ceiling console plus front mounted integrated type.
(b) Cooling capacity to be at least 6,8000 kcal/hr at 3,200 rpm with blower capacity of at least 900 m3/hr.
(c) Compressor to be of axial with a displacement of at least 160 cc.
(d) At least 3-speed blower motor to be provided.
-E/5-
SPECIAL SPECIFICATION (cont’d)
TITLE : SUPPLY AND DELIVERY OF ONE (1) UNIT OF NEW DUAL CAB PICK-UP
TO DBKU TENDER NO :
DBKU/CQS/S/13/16
No.
Description
Yes/No
Remarks
12. LITERATURE
Each motor vehicle to be supplied complete with the following:
(a) One (1) set of original operating instructions.
(b) One (1) set of original service manual for the complete vehicle.
(c) One (1) set of original spare parts book.
(d) One (1) set of original electrical wiring diagram.
(e) One (1) set of original lubrication chart.
(f) One (1) set of standard list of tools supplied with the vehicle.
All literature to be written in the English Language or translated into the English Language. Photo copied will not be accepted. Original copy of catalogue/advertisement to be submitted with tender.
13. OTHERS
(a) Specification sheet of pick-up must be submitted with tender.
(b) Compliance with conditions of tendering for supply of plant, vehicles and equipment.
(c) Compliance with conditions of contract for supply of plants, vehicles and equipment.
(d)
On completion of the supply, complete Literature, Royal Custom & Excise Department related form, JKKP registration (if any) and others related must be submitted together with invoice
- E/6 -
APPENDIX ‘A’
SCHEDULE OF PRICE TITLE : SUPPLY AND DELIVERY OF ONE (1) UNIT OF NEW DUAL
CAB PICK-UP TO DEWAN BANDARAYA KUCHING UTARA TENDER NO :
DBKU/CQS/S/13/16
Tender prices quoted by the tenderer shall be in accordance with Clause One (1) of the “Conditions of tendering for supply of Plant, Vehicles and Equipment to Dewan Bandaraya Kuching Utara” and shall include cost of all items requested (including road tax and insurance premium) in this specification unless otherwise stated.
All tender prices shall be quoted in Ringgit Malaysia only. A. NETT PRICE NEW DUAL CAB PICK-UP No. Description Foreign
Make (RM) Malaysian Make
or Assembly (RM)
A1. Nett price of one (1) unit of New Dual Cab Pick-up including insurance and road tax complete with all accessories, fittings and tools and in accordance with this Specification.
A2 6% Goods and Services Tax (GST)
B. NETT PRICE OF LITERATURE REQUIRED AS AT SPECIFICATION OF NEW CAB PICK-UP No. Description Foreign
Make (RM) Malaysian Make
or Assembly (RM)
B1. One (1) set of original operating instructions.
B2. One (1) set of original service manual for the complete vehicle.
B3. One (1) set of original spare parts book.
B4. One (1) set of original electrical wiring diagram. B5. One (1) set of original lubrication chart. B6. One (1) set of standard list of tools supplied with
the vehicle.
B7. Total(RM) Total A1 (Excluding all good and service tax (GST)) and B7 to be carried forward to Form of Tender on page B/1
APA/1
APPENDIX ‘A’ (cont’d)
SCHEDULE OF PRICE TITLE : SUPPLY AND DELIVERY OF ONE (1) UNIT OF NEW DUAL CAB PICK-
UP TO DEWAN BANDARAYA KUCHING UTARA. TENDER NO :
DBKU/CQS/S/13/16
CURRENCY EXCHANGE RATE The exchange rate between Malaysian currency and the currency of the country exporting the vehicle at time of tendering is as follows:- _____________________________________RINGGIT MALAYSIA____________________
DELIVERY PERIOD Delivery of vehicle in good working order to Dewan Bandaraya Kuching Utara as follows:- (a) One (1) unit of New Dual Cab Pick-up within _______________ weeks from the date of
receipt of Purchase Order.
________________________________ ________________________________
(SIGNATURE OF WITNESS) (SIGNATURE OF TENDERER)
________________________________ ________________________________
(NAME OF WITNESS) (STAMP)
Date: _________________________ Address: ________________________
________________________________
________________________________
________________________________
APA/2
APPENDIX ‘B’
DUTY FREE PRICE COMPONENT TITLE : SUPPLY AND DELIVERY OF ONE (1) UNIT OF NEW DUAL CAB PICK-
UP TO DEWAN BANDARAYA KUCHING UTARA. TENDER NO :
DBKU/CQS/S/13/16
All duty free prices must be itemised under F.O.B. (Free On Board) freight, insurance and clearance and delivery cost. Improper break down or fault to submit this requirement will result in rejection of tender. DUTY FREE COMPONENT
No.
Description Foreign Make (RM)
Malaysian Make or Assembly (RM)
1. F.O.B. cost at Port Of 2. Freight
3. Insurance 4. Clearance and delivery cost inclusive of all work
and delivered to DBKU in good working order.
DELIVERY Delivery of vehicle will be as follows:-
(a) One (1) unit of New Dual Cab Pick-up to DBKU within __________ weeks from the date of
receipt of Purchase Order.
________________________________ ________________________________
(SIGNATURE OF WITNESS) (SIGNATURE OF TENDERER)
________________________________ ________________________________
(NAME OF WITNESS) (STAMP)
Date: _________________________ Address: ________________________
________________________
________________________
APB/1
APPENDIX ‘C’
SCHEDULE OF TECHNICAL DATA TITLE : SUPPLY AND DELIVERY OF ONE (1) UNIT OF NEW DUAL CAB PICK-
UP TO DEWAN BANDARAYA KUCHING UTARA TENDER NO :
DBKU/CQS/S/13/16
The tenderer must submit answers to all questions listed below:-
No.
Questions
Answers To Be Completed By Tenderer
1.
2.
Supplier (a) Name and Address of supplier (b) Name of manufacturer (c) Full address of manufacturer Vehicle (a) Name and/or Model of vehicle (b) Year of manufacturer
………………………………………………….
……………………………………….…….....
……………………………………….………..
………………………………………………..
………………………………………………..
(c) Country of origin ………………………………………………. (d) Country of assembly ……………………………….…………….… (e) Name of assembler ……………………………….…………….… (f) Full address of assembler ……………………………………………….
……………………………………………….
3. Weights
(a)
Permissible gross vehicle weight (kg)
………………kg
(b)
Permissible maximum payload - on road condition (kg)
………………kg
(c) Permissible maximum payload - off road condition (kg)
………………kg
(d) Weight of van in running trim (kg) ………………kg
(e) Permissible maximum load on:- (i) Front axle (kg) (ii) Rear axle (kg)
………………kg ………………kg
- APC1 -
APPENDIX ‘C’ (Cont’d) TITLE : SUPPLY AND DELIVERY OF ONE (1) UNIT OF NEW DUAL CAB PICK-
UP TO DEWAN BANDARAYA KUCHING UTARA TENDER NO :
DBKU/CQS/S/13/16
No. Questions Answers To Be Completed By
Tenderer
4.
Dimensions
(a)
(b)
(c)
(d)
(e)
(f) (g)
Wheelbase
Track (centre to centre of tyres)
(i) Front
(ii) Rear
Overall length
Overall width
Overall height
Ground clearance (road ground)
Clear turning circle diameter
…………………. mm
…………………. mm
…………………. mm
…………………. mm
…………………. mm
…………………. mm
…………………. mm
…………………. mm
5.
Engine
(a)
(b)
(c)
(d)
(e)
(f)
Make of engine
Model/Type of engine
No. of cylinder
Bore x stroke (mm x mm)
Piston displacement (cc.)
BHP (Nett with all engine accessories driven) (kW) (bhp @ rpm)
……………………….
……………………….
……………………….
……………………….
……………………….
……………………….
(g)
(h)
(i)
(j)
(k)
Maximum output (kW/rpm)
Maximum torque (kgm @ rpm)
Fuel consumption (kmpl)
Fuel tank capacity (litres)
Compression ratio
……………………….
……………………….
……………………….
……………………….
……………………….
- APC2 -
APPENDIX ‘C’ (Cont’d) TITLE : SUPPLY AND DELIVERY OF ONE (1) UNIT OF NEW DUAL CAB PICK-
UP TO DEWAN BANDARAYA KUCHING UTARA TENDER NO :
DBKU/CQS/S/13/16
No. Questions Answers To Be Completed By
Tenderer
6.
Transmission
(a) Clutch
(i) Type
(ii) Size
……………..mm dia.
……………..mm dia.
(b) No. of forward gear ……………………... (c) No. of forward gear in constant mesh ……..……………...
(d) No of forward gear with synchromesh engagement
……………............
(e) Ratio of transfer gearbox …………………….
(f) Gear ratio and speed at (refer to the specification as attached)
…………………….
(g) Ratio of axles …………………….
(h) Type of final drive …………………….
(i) Maximum gradient negotiable when running fully laden.
……………………..
(j) Maximum gradient negotiable for start from stationary
……………………..
7.
Brakes
(a) Type / system ……………………..
(b) Total effective braking lining area of foot brake (sq. mm)
……………………..
(c) Total effective brake lining area of parking brake (sq. mm)
…………………….
(d) Maximum gradient on which the fully laden vehicle can be parked by hand brake.
…………………….
- APC3 -
APPENDIX ‘C’ (Cont’d) TITLE : SUPPLY AND DELIVERY OF ONE (1) UNIT OF NEW DUAL CAB PICK-
UP TO DBKU TENDER NO :
DBKU/CQS/S/13/16
No. Questions Answers To Be Completed By
Tenderer
8.
Wheel and Tyres
(a) Type of wheel ……………..
(b) No. of stud fixings ……………..
(c) Make of Tyre ……………..
(d) Tread pattern ……………..
(e) Size of tyre & ply rating ……………..
(f) Maximum total carrying capacity of tyre outfit at tyre’s manufacturer’s recommended tyre pressure (kg).
……………..
9.
Electrical System
(a) Voltage of system (volts) ……………..
(b) NO. of battery ……………..
(c) Total capacity of battery (amp. hour) ……………..
(d) Charging of battery ……………..
(e) Capacity of charger (amp. hr) (Watts) ……………..
________________________________ ________________________________
(SIGNATURE OF WITNESS) (SIGNATURE OF TENDERER)
________________________________ ________________________________
(NAME OF WITNESS) (STAMP)
Date: _________________________ Address: ________________________
________________________________
________________________________
- APC4-
APPENDIX ‘D’
LIST OF TOOLS SUPPLIED WITH EACH VEHICLE TITLE : SUPPLY AND DELIVERY OF ONE (1) UNIT OF NEW DUAL CAB PICK-
UP TO DBKU TENDER NO :
DBKU/CQS/S/13/16
Item No.
Description
No. Supplied
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
___________________________________ ___________________________________
(SIGNATURE OF WITNESS) (SIGNATURE OF TENDERER)
___________________________________ ___________________________________
(NAME OF WITNESS) (STAMP)
Date: ________________________ Address: ___________________________
___________________________________
___________________________________
- APD/1 -
APPENDIX ‘E’
SAMPLE SPARE PART PRICES (ENGINE) TITLE : SUPPLY AND DELIVERY OF ONE (1) UNIT OF NEW DUAL CAB PICK-
UP TO DBKU TENDER NO :
DBKU/CQS/S/13/16
No.
Description
C & F Cost Price
(RM) Ex-Stock Price
(RM)
1. ENGINE SYSTEM
- APE/1 –
APPENDIX ‘E’ (cont’d)
SAMPLE SPARE PART PRICES (ENGINE) TITLE : SUPPLY AND DELIVERY OF ONE (1) UNIT OF NEW DUAL CAB PICK-
UP TO DBKU TENDER NO :
DBKU/CQS/S/13/16
No.
Description
C & F Cost Price
(RM) Ex-Stock Price
(RM)
2. STARTING AND CHARGING
_________________________________ ___________________________________
(SIGNATURE OF WITNESS) (SIGNATURE OF TENDERER)
___________________________________ ___________________________________
(NAME OF WITNESS) (STAMP)
Date: _______________________ Address: ___________________________
____________________________
____________________________
- APE/2-
APPENDIX ‘F’
SAMPLE SPARE PART PRICES VEHICLE TITLE : SUPPLY AND DELIVERY OF ONE (1) UNIT OF NEW SPORT UTILITY
VEHICLE (SUV) TO DBKU TENDER NO :
DBKU/CQS/S/14 /16
No Description C & F Cost Price (RM) Ex-Stock Price
(RM) 1. CLUTCH
2. TRANSMISSION
3. REAR AXLES
-APF/1-
APPENDIX ‘F’( Cont’d)
SAMPLE SPARE PART PRICES VEHICLE TITLE : SUPPLY AND DELIVERY OF ONE (1) UNIT OF NEW SPORT UTILITY
VEHICLE (SUV) TO DBKU TENDER NO :
DBKU/CQS/S/14 /16
No Description C & F Cost Price (RM) Ex-Stock Price
(RM) 4. STEERING
_______________________________ ___________________________________
(SIGNATURE OF WITNESS) (SIGNATURE OF TENDERER)
________________________________ ___________________________________
(NAME OF WITNESS) (STAMP)
Date: ___________________________ Address: _______________________________
_______________________________
_______________________________
- APF/2 -
APPENDIX ‘G’
FUEL CONSUMPTION AND ROUTINE MAINTENANCE COST ASSESSMENT
TITLE : SUPPLY AND DELIVERY OF ONE (1) UNIT OF NEW DUAL CAB PICK-
UP TO DBKU TENDER NO :
DBKU/CQS/S/13 /16
1. FUEL (a) Specific fuel consumption at maximum Hp : _____________
(b) Specific fuel consumption at maximum torque : _____________ (c) Specific fuel consumption at maximum RPM : _____________ 2. LUBRICATING OIL OF ONE (1) UNIT OFNEW DUAL CAB PICK-UP
No.
Description
Type of
oil
Sump
capacity
Frequency in hours, km or miles
Remarks
1st oil change
Normal frequency
1. Engine sump
2. Torque converter
3. Transmission/power shift
4. Transmission
5. Differential
6. Front axle
7. Rear axle
8. Final drive (RHS & LHS)
9. Tandem drive (RHS & LHS)
10. Steering Gear Case
11. Cycle Reverse Gear Case
12.
Hydraulic system (including the hydraulic oil tank)
- APG/1 -
APPENDIX ‘G’ (cont’d)
FUEL CONSUMPTION AND ROUTINE MAINTENANCE COST ASSESSMENT
TITLE : SUPPLY AND DELIVERY OF ONE (1) UNIT OF NEW DUAL CAB PICK-
UP TO DBKU TENDER NO :
DBKU/CQS/S/13 /16
3. FILTERS OF ONE (1) UNIT NEW DUAL CAB PICK-UP
No.
Description
No.
1st change km/mile/hr
Normal frequency km/mile/hr
Cost per
unit
Remarks
1. Fuel filter
2. Engine oil filter
3. Transmission oil filter
4. Filter
5. Hydraulic oil filter
6. Other
_________________________________ __________________________________
(SIGNATURE OF WITNESS) (SIGNATURE OF TENDERER)
________________________________ ___________________________________
(NAME OF WITNESS) (STAMP)
Date: _________________________ Address: ___________________________
___________________________________
___________________________________
- APG/2 -
APPENDIX ‘H’
TRAINING/TECHNICAL BACK-UP SERVICE TITLE : SUPPLY AND DELIVERY OF ONE (1) UNIT OF NEW DUAL CAB PICK-
UP TO DBKU TENDER NO :
DBKU/CQS/S/13 /16
1. Name of training officers : (1) …………………………………………………
(2) …………………………………………………
2. Qualification of officers : (1) …………………………………………………
(2) ………………………………………………… 3. Training curriculum : To be submitted separately in accordance with
Clause 4 of Condition of Tendering for Supply of Plant, Vehicles And Equipment To Dewan Bandaraya Kuching Utara.
4. Period for two (2) free after sales service:- First servicing : ………………………………………………………… Second servicing : …………………………………………………………
_______________________________ _________________________________
(SIGNATURE OF WITNESS) (SIGNATURE OF TENDERER)
________________________________ _________________________________
(NAME OF WITNESS) (STAMP)
Date: _______________________ Address: ___________________________
___________________________________
___________________________________
- APH/1 -
APPENDIX ‘I’
INSPECTION TITLE : SUPPLY AND DELIVERY OF ONE (1) UNIT OF NEW DUAL CAB PICK-
UP TO DBKU TENDER NO :
DBKU/CQS/S/13 /16
No.
Description
Yes/No
Remarks
1.
(a)
INSPECTION New Equipment Tenderers are to arrange for the Officer-In-Charge or his representatives (not less than two (2) officers) to inspect and test the new equipment offered and to witness the production at the manufacturer premises or at the premises of users of such equipment as demand fit by the government.
(b)
On claims to local assembled/ manufacture, the tenderer is responsible for making provisions to enable the Officer-In-Charge or at least two (2) of his representatives during manufacture, inspect the manufacturer’s premises, the materials and workmanship on the equipment. Such inspection shall not release the successful tenderer from any obligation under this tender.
(c)
The tenderer shall notify the Officer-In-Charge thirty (30) days in advance of the date on which the equipment is ready for inspection.
- API/1