Supporting the World’s Networks— Anritsu Digital/Optical Measuring Instruments —

MP1763C Pulse Pattern Generator

● 50 Mbit/s to 12.5 Gbit/s pulse pattern generation and detection● Programmable pattern up to 8 Mbits or PRBS up to 231 – 1.● Options for optical modules : 1/4 speed parallel out (MP1763C-08), differ-

ential data input (MP1764C-02) and clock data recovery (MP1764C-03).

Error Detector (50 Mbit/s to 12.5 Gbit/s)MP1764C

MP1775AFour Channels Pulse Pattern Generator (100 Mbit/s to 12.5 Gbit/s)

For R&D up to 50 Gbit/s Systems

● 100 Mbit/s to 12.5 Gbit/s 4 channels pulse pattern generation.● Programmable pattern up to 32 Mbits (when 4 channels are MUXed) or

PRBS up to 231 – 1.● Different levels and offsets can be set for 4 channels.

For R&D and Manufacturing Devices upto 12.5 Gbit/s

MP1632CDigital Data Analyzer

For R&D and Manufacturing Devices up to3.2 Gbit/s

● 10 Mbit/s to 3.2 Gbit/s pulse pattern generation and detection.50 Mbit/s to 3.2 Gbit/s with internal clock.

● Eye diagram and burst signal measurement without other devices.● Programmable pattern up to 8 Mbits or PRBS up to 231 – 1.

MP1776A Four Channels Error Detector (100 Mbit/s to 12.5 Gbit/s)

For R&D up to 50 Gbit/s Systems

● 100 Mbit/s to 12.5 Gbit/s 4 channels Error Detection.● Programmable pattern up to 32 Mbit (when 4 channels are MUXed) or

PRBS up to 231 – 1● Different thresholds and input clock phases can be set for 4 channels.

2

MP1803A 43.5 G MUX

For R&D up to 43.5 Gbit/s Systems

● 25 Gbit/s to 43.5 Gbit/s 4:1 MUX (MP1803A) and 1:4 DEMUX (MP1804A).● Clock delay (0.1 ps step) and input threshold voltage (0.001 V step) adjust-

ment.● Full rate clock operation for good waveform and jitter measurement capa-

bility.

MP1804A 43.5 G DEMUX (25 Gbit/s to 43.5 Gbit/s)

MP1570ASONET/SDH/PDH/ATM Analyzer (1.5 Mbit/s to 10 Gbit/s)

For SONET, SDH, PDH and ATM networkTest

● From 1.5 Mbit/s to 10 Gbit/s in a single unit● Possible VC4-64c/OC-192c concatenation mapping test● Jitter/wander test conforming to ITU-T O.172

MP1590BNetwork Performance Tester (1.5 Mbit/s to 10.7 Gbit/s)

Supports Next Generation NetworkMeasurement from OTN to 10 GbE

● Supports performance of PDH/DSn/SDH/SONET/OTN and Jittermeasurement with one unit

● EoS, Virtual Concatenation, LCAS measurement● 10M/100M, Gigabit, 10 Gigabit Ethernet measurement

MP1580APortable 2.5G/10G Analyzer (2.5/10 GHz)

For 2.5G/10G Jitter/WanderMeasurements

● Complies with ITU-T O.172 and Telcordia GR-253 standards● Complies with the ITU-T G.813, MTIE/TDEV wander measurement● Combined with the MP1570A. Jitter can be added to SONET/SDH signal

and measured.

3

NEWNEW

4

MP1220A ATM Quality Analyzer (1.5 Mbit/s to 622 Mbit/s)

For Construction and Maintenance ofATM Networks

● Various interfaces from 1.5 Mbit/s (T1) to 622 Mbit/s (VC4-4c/OC-12c)● 150 Mbit/s real-time analysis up to CPCS● 10.4" large screen and GUI

MD6430ANetwork Data Analyzer (50 bit /s to 10 Mbit /s)

One Instrument for Installation andMaintenance

● For the construction and maintenance of high-speed digital dedicatedlines, ISDN, and frame relays

● Quick measurement with one-touch operation● Compact size and lightweight ● Battery operation possible

MT7407A Multislot Chassis (10 Mbit/s to 10 Gbit/s)

● 112 ports are supported only one chassis (10/100 M Ethernet)● 14 ports are supported only one chassis (10 G Ethernet)● Wide-area measurement by cooperation with MD1230B and MD1231A1

MD1231A1 IP Network Analyzer (10 Mbit/s to 10 Gbit/s)

For production line and large-scaleequipment

Size suitable for troubleshooting

MD1230B Data Quality Analyzer (10 Mbit/s to 10 Gbit/s)

Complete Performance Testing andMonitoring with One Unit

● Both portability and support for 10M to 10G interfaces● Frame wire-rate sending and real-time traffic analysis● Multi-layer VLAN support using MU120121A/120122A plus Clock Variation

Function

● Support for 10M to 10G interfaces using MD1231A1 ● Frame wire-rate sending and real-time traffic analysis ● Wide-area measurement by cooperation with MD1230B and MT7407A.

5

MT9080 Series

● SM 1310/1550/1650 nm OTDR for installing and maintaining optical fibers● Full support for FTTx (FTTB, FTTC, FTTH, PON) fibers● Short 1 m dead zone (event)● Optical power meter/Optical light source for fiber identification

All New Field Measuring Instrument forFTTx

MS9710B/COptical Spectrum Analyzer (0.6 to 1.75 µm)

For Evaluation of Characteristics of WDM OpticalCommunication, LD/LED, and Passive Elements

● 70 dB dynamic range, –90 dBm optical reception sensitivity ● Wavelength accuracy of ±20 pm(1520 to 1620 nm); MS9710C-15● Low price model (MS9710B)

MW9076 Series

For Chromatic Dispersion Measurement ofOptical Fibers

● 45 dB high dynamic range ● 8 m short dead zone● Measurement in 10 s (Full-Automatic Mode), 0.15 s real-time sweep● Chromatic dispersion measurement from one-end (MW9076D1)

(1.31/1.45/1.55/1.625 µm(SM), 0.85/1.3 µm (GI))Optical Time Domain Reflectometer

ACCESS Master (1.31 /1.55/1.65 µm (SM))

MW9077A/A1

● A5 size compact for optical fiber monitor system● Extensive operating temperature range of –5 to +55˚C● High performance inherited from MW9076 series● OTDR quick data transmit by Ethernet interface and RS-232C

For Optical Fiber Monitor System, Compactand High Performance OTDR Module

OTDR Module (1.31 µm (SM), 1.55 µm (SM))

NEWNEW

6

MN9662A/9664A/9672A/9674AOptical Channel Selector (1.2 to 1.65 µm)

For Automatic Switching of Optical Paths

● Automatic switching of 8 (or 16) channels● Built-in GPIB and RS-232C I/F

MT9810B Optical Test Set (0.75 to 1.7 µm)

● Incorporates light sources and optical sensor units(SM, GI)● High-power light source of +10 dBm, and high-sensitivity sensor of –110

dBm, +35 dBm (MA9331A)● DFB-LD Light sources conforming ITU-T recommendations for Dense-

WDM networks (C, L band)

Basic Measuring Instrument for OpticalSystem

MT9812BMulti Channel Box (0.75 to 1.7 µm)

For Evaluation of WDM OpticalCommunication and Optical Devices

● Can accommodate up to nine units of optional light source and power sensor● Multiple wavelength light sources for WDM (1530 to 1610 nm, ITU-Grid)● GPIB and RS-232C are provided as a standard.

MS9780AOptical Spectrum Analyzer (0.6 to 1.75 µm)

For 10-,50- and 62.5 µm Core DiameterFibers

● 70 dB dynamic range, and guaranteed optical reception sensitivity of –90 dBm● Versatile range of WDM application functions● Built-in 3.5" FDD

7

MN9605COptical Attenuator (1.31/1.55 µm)

Easy-to-Change Optical ConnectorAdapters

● For single-mode fibers● Supports 1.31/1.55 µm

ML9002A Optical Handy Power Meter (0.38 to 1.8 µm)

MS9020DOptical Loss Test Set (0.85/1.3/1.55 µm)

For Measurement of Optical Fiber Lossand Checking Optical PartsFor Easy Optical Power Measurement

● Power measurement from –70 to +20 dBm● Handy type

● Built-in LD/LED light source and optical sensor units● Nine light sources, eight optical sensors● Compact and lightweight (200 g)

Catalog No. SupportingWorldNetwork-E-A-1-(10.00) Printed in Japan 2005-6 20W/M

ANRITSU CORPORATION1800 Onna, Atsugi-shi, Kanagawa, 243-8555 JapanPhone: +81-46-223-1111Fax: +81-46-296-1264

• U.S.A.ANRITSU COMPANYTX OFFICE SALES AND SERVICE1155 East Collins Blvd., Richardson, TX 75081, U.S.A.Toll Free: 1-800-ANRITSU (267-4878)Phone: +1-972-644-1777Fax: +1-972-644-3416

• CanadaANRITSU ELECTRONICS LTD.700 Silver Seven Road, Suite 120, Kanata, ON K2V 1C3, CanadaPhone: +1-613-591-2003 Fax: +1-613-591-1006

• Brasil ANRITSU ELETRÔNICA LTDA.Praca Amadeu Amaral, 27 - 1 andar01327-010 - Paraiso, Sao Paulo, BrazilPhone: +55-11-3283-2511Fax: +55-11-3886940

• U.K.ANRITSU LTD.200 Capability Green, Luton, Bedfordshire LU1 3LU, U.K.Phone: +44-1582-433280 Fax: +44-1582-731303

• GermanyANRITSU GmbHGrafenberger Allee 54-56, 40237 Düsseldorf, Germany Phone: +49-211-96855-0 Fax: +49-211-96855-55

• FranceANRITSU S.A.9, Avenue du Québec Z.A. de Courtabœuf 91951 LesUlis Cedex, France Phone: +33-1-60-92-15-50Fax: +33-1-64-46-10-65

• ItalyANRITSU S.p.A.Via Elio Vittorini, 129, 00144 Roma EUR, ItalyPhone: +39-06-509-9711 Fax: +39-06-502-2425

• SwedenANRITSU ABBorgafjordsgatan 13 164 40 Kista, SwedenPhone: +46-853470700 Fax: +46-853470730

• FinlandANRITSU ABTeknobulevardi 3-5, FI-01530 Vantaa, FinlandPhone: +358-9-4355-220Fax: +358-9-4355-2250

• DenmarkAnritsu AB DanmarkKorskildelund 6 DK - 2670 Greve, DenmarkPhone: +45-36915035Fax: +45-43909371

• SingaporeANRITSU PTE LTD.10, Hoe Chiang Road #07-01/02, Keppel Towers,Singapore 089315 Phone: +65-6282-2400 Fax: +65-6282-2533

• Hong Kong ANRITSU COMPANY LTD.Suite 923, 9/F., Chinachem Golden Plaza, 77 ModyRoad, Tsimshatsui East, Kowloon, Hong Kong, ChinaPhone: +852-2301-4980Fax: +852-2301-3545

• P. R. ChinaANRITSU COMPANY LTD.Beijing Representative OfficeRoom 1515, Beijing Fortune Building, No. 5 North Road,the East 3rd Ring Road, Chao-Yang DistrictBeijing 100004, P.R. ChinaPhone: +86-10-6590-9230

• KoreaANRITSU CORPORATION8F Hyun Juk Bldg. 832-41, Yeoksam-dong, Kangnam-ku, Seoul, 135-080, KoreaPhone: +82-2-553-6603Fax: +82-2-553-6604

• AustraliaANRITSU PTY LTD.Unit 3/170 Forster Road Mt. Waverley, Victoria, 3149,AustraliaPhone: +61-3-9558-8177Fax: +61-3-9558-8255

• TaiwanANRITSU COMPANY INC.7F, No. 316, Sec. 1, NeiHu Rd., Taipei, TaiwanPhone: +886-2-8751-1816Fax: +886-2-8751-1817

Specifications are subject to change without notice.

050203

Printed with environment-friendly vegetable soybean oil ink.

Printed on 100% Recycled Paper