supports 20fre
TRANSCRIPT
-
8/10/2019 Supports 20FRE
1/6
FRP "WEAR" PAD
FIG.210 - 20FRE
4REV:
Manufactured by Specialty Plastics
Baton Rouge, LA, U.S.A.www.fiberbond.comThis print and its contents are the property of SpecialtyPlastics. Use of print or its contents is prohibited unlessauthorized in writing. This information is subject to the
controls of the Export Administration Regulations (EAR).This information shall not be provided to non-U.S.
persons or transferred by any means to any locationoutside the United States without advanced written
permission from Exelis and approval from the U.S.Department of Commerce.
Information in this drawing is of a general nature.
Detailed design information (part thickness, loadratings, etc.) are not part of this drawing. User
should consult the manufacturer of the pipesupport for detailed design information and proper
selection of the pipe support for the application.
-
8/10/2019 Supports 20FRE
2/6
RUBBER COATED U-BOLT
FIG.226 - GENERAL DETAIL
11REV:
Manufactured by Specialty Plastics
Baton Rouge, LA, U.S.A.www.fiberbond.comThis print and its contents are the property of SpecialtyPlastics. Use of print or its contents is prohibited unless
authorized in writing. This information is subject to thecontrols of the Export Administration Regulations (EAR).This information shall not be provided to non-U.S.
persons or transferred by any means to any locationoutside the United States without advanced writtenpermission from Exelis and approval from the U.S.
Department of Commerce.
Information in this drawing is of a general nature.Detailed design information (part thickness, load
ratings, etc.) are not part of this drawing. Usershould consult the manufacturer of the pipesupport for detailed design information and properselection of the pipe support for the application.
-
8/10/2019 Supports 20FRE
3/6
STEEL ANCHOR
FIG.230 - 20FRE
1REV:
R
Manufactured by Specialty Plastics
Baton Rouge, LA, U.S.A.www.fiberbond.comThis print and its contents are the property of SpecialtyPlastics. Use of print or its contents is prohibited unlessauthorized in writing. This information is subject to the
controls of the Export Administration Regulations (EAR).This information shall not be provided to non-U.S.
persons or transferred by any means to any locationoutside the United States without advanced written
permission from Exelis and approval from the U.S.Department of Commerce.
Information in this drawing is of a general nature.
Detailed design information (part thickness, loadratings, etc.) are not part of this drawing. User
should consult the manufacturer of the pipesupport for detailed design information and proper
selection of the pipe support for the application.
-
8/10/2019 Supports 20FRE
4/6
SMALL STEEL ANCHOR
FIG.232 - 20FRE
2REV:
R
Manufactured by Specialty Plastics
Baton Rouge, LA, U.S.A.www.fiberbond.comThis print and its contents are the property of SpecialtyPlastics. Use of print or its contents is prohibited unlessauthorized in writing. This information is subject to the
controls of the Export Administration Regulations (EAR).This information shall not be provided to non-U.S.
persons or transferred by any means to any locationoutside the United States without advanced written
permission from Exelis and approval from the U.S.Department of Commerce.
Information in this drawing is of a general nature.
Detailed design information (part thickness, loadratings, etc.) are not part of this drawing. User
should consult the manufacturer of the pipesupport for detailed design information and proper
selection of the pipe support for the application.
-
8/10/2019 Supports 20FRE
5/6
STEEL RISER CLAMP
FIG.240 - 20FRE
2REV:
R
Manufactured by Specialty Plastics
Baton Rouge, LA, U.S.A.www.fiberbond.comThis print and its contents are the property of SpecialtyPlastics. Use of print or its contents is prohibited unlessauthorized in writing. This information is subject to the
controls of the Export Administration Regulations (EAR).This information shall not be provided to non-U.S.
persons or transferred by any means to any locationoutside the United States without advanced written
permission from Exelis and approval from the U.S.Department of Commerce.
Information in this drawing is of a general nature.
Detailed design information (part thickness, loadratings, etc.) are not part of this drawing. User
should consult the manufacturer of the pipesupport for detailed design information and proper
selection of the pipe support for the application.
-
8/10/2019 Supports 20FRE
6/6
FRP "DUMMY LEG"
FIG.90 - GENERAL DETAIL
1REV:
Manufactured by Specialty Plastics
Baton Rouge, LA, U.S.A.www.fiberbond.comThis print and its contents are the property of Specialty
Plastics. Use of print or its contents is prohibited unlessauthorized in writing. This information is subject to the
controls of the Export Administration Regulations (EAR).This information shall not be provided to non-U.S.
persons or transferred by any means to any locationoutside the United States without advanced written
permission from Exelis and approval from the U.S.Department of Commerce.
Information in this drawing is of a general nature.
Detailed design information (part thickness, loadratings, etc.) are not part of this drawing. User
should consult the manufacturer of the pipesupport for detailed design information and proper
selection of the pipe support for the application.