surfacing using solidw
DESCRIPTION
Presentation on using Surfacing using SolidWorks CADTRANSCRIPT
Norman F. SimmsCAD Mechanical / Electrical Designer
Surface Modeling in SolidWorks
2
Create 3D Sketch to Guide your Surfaces
Norman F. Simms Mechanical / Electrical Designer 215-269-0390
3Norman F. Simms Mechanical / Electrical Designer 215-269-0390
Creating aLofted Surface
4Norman F. Simms Mechanical / Electrical Designer 215-269-0390
Surfaces – Sweep (Profile, Path, and Guide Curve)
5Norman F. Simms Mechanical / Electrical Designer 215-269-0390
Surfaces – Sweep (Profile, Path, and Guide Curve)
6Norman F. Simms Mechanical / Electrical Designer 215-269-0390
Surfaces – Sweep (Profile, Path, and Guide Curve)
7Norman F. Simms Mechanical / Electrical Designer 215-269-0390
Surfaces – Loft (Tangency to Face)
8Norman F. Simms Mechanical / Electrical Designer 215-269-0390
Surfaces – Loft (Tangency to Face – Adjust End Constraints)
9Norman F. Simms Mechanical / Electrical Designer 215-269-0390
Surfaces – Loft (Tangency to Face)
10Norman F. Simms Mechanical / Electrical Designer 215-269-0390
Knit Surfaces
11Norman F. Simms Mechanical / Electrical Designer 215-269-
0390
Pull Point 1
Filled Surface with Constraint Point
12
Norman F. Simms Mechanical / Electrical Designer 215-269-0390
Filled Surface with Constraint Point for the other Side
13
Norman F. Simms Mechanical / Electrical Designer 215-269-0390
Planar Surface
Planar Surface
Creating Planar Surfaces
14Norman F. Simms Mechanical / Electrical Designer 215-269-0390
Knit Surface – Combining Surfaces Together
15Norman F. Simms Mechanical / Electrical Designer 215-269-0390
Revolved Surface – (Revolving Line Around an Axis)
16Norman F. Simms Mechanical / Electrical Designer 215-269-0390
Move Copy (Moving Surface down -6.35mm)
17Norman F. Simms Mechanical / Electrical Designer 215-269-0390
Trim Surfaces
18Norman F. Simms Mechanical / Electrical Designer 215-269-0390
Extrude Surface & Move & Copy Surface
Move/Copy Command
19Norman F. Simms Mechanical / Electrical Designer 215-269-0390
Using Move/Copy Command to Copy and Rotate Surface
Select Feature in the Feature Tree and Select Hide
20
Norman F. Simms Mechanical / Electrical Designer 215-269-0390
Surface Modeling is used in designing all types of complex cures and is used more and more in product design, automotive, aircraft, and a host of other applications.
If you are someone who is trying to understand CAD , I hope this was a help.
If you are someone who needs someone to help them create new designs. I hope you will use the number below and give me a call.
Thank You for Your Time.