sustainability of the cement and concrete industries by tarun r
TRANSCRIPT
Center for
By-Products
Utilization
SUSTAINABILITY OF THE CEMENT AND CONCRETE
INDUSTRIES
By Tarun R. Naik and Fethullah Canpolat
CBU-2005-26
REP-597
December 2005
Submitted for consideration for publication in the ASCE Journal …..
Department of Civil Engineering and Mechanics
College of Engineering and Applied Science
THE UNIVERSITY OF WISCONSIN – MILWAUKEE
1
Sustainability of The Cement and Concrete Industries
By Tarun. R. Naik, F. ASCE1 and Fethullah Canpolat
2
Abstract: Sustainability is important to the well-being of our planet, continued growth of a
society, and human development. Concrete is one of the most widely used construction
materials in the world. However, the production of portland cement, an essential constituent of
concrete, leads to the release of significant amount of CO2, a greenhouse gas (GHG). The
production of one ton of portland cement produces about one ton of CO2 and other GHGs. The
environmental issues associated with GHGs, in addition to natural resources issues, will play a
leading role in the sustainable development of the cement and concrete industry during this
century. For example, as the supply of limestone decreases it will become more difficult to
produce adequate amounts of portland cement for construction. Once there is no more
limestone, and thus no portland cement, all of the employment associated with the concrete
industry as well as new construction projects will be terminated. Therefore, it is necessary to
look for sustainable solutions for future concrete construction. A sustainable concrete structure
is constructed in order to ensure that the total environmental impact during its life cycle,
including its use, will be minimal. Sustainable concrete should have a very low inherent energy
requirement, be produced with little waste, be made from some of the most plentiful resources on
earth, produce durable structures, have a very high thermal mass, and be made with recycled
1 Academic Program Director and Professor of Structural Engineering, UWM Center for By-Products Utilization,
Department of Civil Engineering and Mechanics, College of Engineering and Applied Science, University of
Wisconsin – Milwaukee, P. O. Box 784, Milwaukee, WI 53201, USA. E-Mail: [email protected].
2 Research Associate, UWM Center for By-Products Utilization, University of Wisconsin – Milwaukee, P. O. Box
784, Milwaukee, WI 53201, USA.
2
materials. Sustainable constructions have a small impact on the environment. They use ―green‖
materials, which have low energy costs, high durability, low maintenance requirements, and
contain a large proportion of recycled or recyclable materials. Green materials also use less
energy and resources, and can lead to high-performance cements and concrete. Concrete must
keep evolving to satisfy the increasing demands of all of its users. Designing for sustainability
means accounting for the short-term and long-term environmental consequences in the design.
CE Database Subject Headings: Concrete; Environment; Fly ash; Portland cement; Recycling;
Sustainable development
3
Introduction
According to the World Commission on Environment and Development of the UN, sustainability
means ―meeting the needs of the present without compromising the ability of the future
generations to meet their own needs‖ (UNFCCC COP9 Report 2004). The sustainability of the
cement and concrete industries is imperative to the well-being of our planet and to human
development. However, the production of portland cement, an essential constituent of concrete,
leads to the release of a significant amount of CO2 and other greenhouse gases (GHGs). The
environmental issues associated with CO2 will play a leading role in the sustainable development
of the cement and concrete industry during this century. One of the biggest threats to the
sustainability of the cement industry is the dwindling amount of limestone in some geographical
regions. Limestone is essential to the production of portland cement. As limestone becomes a
limited resource, employment and construction associated with the concrete industry will
decline. Therefore, those involved with these industries must develop new techniques for
creating concrete with a minimal use of limestone. Concrete production is not only a valuable
source of societal development, but also a significant source of employment. Concrete is the
world’s most consumed man-made material. It is no wonder that in the U.S.A. alone, concrete
construction accounted for two million jobs in 2002 (United States House Resolution 394 2004).
About 2.7 billion m3
of concrete was produced in 2002 worldwide. This equals to more than 0.4
m3 of concrete produced per person annually worldwide. Therefore, to create not only
sustainable societal development, but also to sustain employment, such as batch plant operators,
truck drivers, ironworkers, laborers, carpenters, finishers, equipment operators, and testing
technicians, as well as professional engineers, architects, surveyors, and inspectors, the concrete
industry must continue to evolve with the changing needs and expectations of the world.
4
What is sustainability?
Limestone is used to manufacture portland cement (Fig. 1). Currently, portland cement is the
most commonly used material in producing concrete.
Entire geographical regions are running out of limestone resources to produce cement. And
major metropolitan areas are running out of materials to use as aggregates for making concrete.
Sustainability requires those in the construction industry to take the entire life- cycle, including
construction, maintenance, demolition, and recycling of buildings into consideration
(McDonough et al. 1992; Worrell and Galtisky 2004).
A sustainable concrete structure is one that is constructed such that the total societal impact
during its entire life cycle is minimal. Designing with sustainability in mind includes accounting
for the short-term and long-term consequences of the structure. In order to decrease the long-
term impact of structures, the creation of durable structures is paramount.
Building in a sustainable manner and scheduling appropriate building maintenance are
significant in the ―new construction ideology‖ of this new century. In particular, to build in a
sustainable manner means to focus attention on the effects on human health, energy
conservation, and physical, environmental and technological resources for new and existing
buildings. It is also important to take into account the impact of construction technologies and
methods when creating sustainable structures (McDonough et al. 1992). An integrated
sustainable design process can reduce project costs and operating costs of the maintenance.
5
There are many challenges associated with portland cement production. Of these, energy and
resource conservation, the cost of producing portland cement, and GHG emissions are the most
significant. Therefore, supplementary cementing materials such as fly ash and slag should
replace larger amounts of portland cement in concrete. However, before any construction
occurs, all aspects of the building materials to be used should be evaluated. In order to build
structures and infrastructures that are cost efficient, environmentally friendly, and durable, the
impact of the building materials on local and worldwide air conditions must be examined
(McDonough et al. 1992). CO2 emissions are expected to rise by about 50% by 2020 from the
current levels (Table 1) due to portland cement production (Malhotra 2004).
For each ton of portland cement clinker, 1.5 to 10 kg of NOx is released into the atmosphere. In
2000, worldwide cement clinker production was approximately 1.5 billion tons. It means that in
2000 between 23 and 136 billion kg of NOx was produced to make portland cement clinker
(Malhotra 2004).
If the challenges associated with reducing CO2, NOx, and other GHGs are to be met, then the
concrete industry must develop other materials to replace portland cement. Use of blended
cements and chemical admixtures must be significantly increased for sustainability of the cement
and concrete industries.
Concrete
For over 200 years, concrete has been accepted for its long-lasting and dependable nature. In
addition to durability and dependability, concrete also has superior energy performance, is
flexible in design, affordable, and is relatively environmentally friendly (Cement Association of
6
Canada 2004). It can be expected that concrete will be needed to both increase industrialization
and urbanization while protecting the environment. To do this, the concrete industry should
consider recycling industrial by-products such as fly ash safely and economically. When
industrial by-products replace cement, even up to 70%, in concrete, the environmental impact
improves along with the energy efficiency, and durability of concrete (Naik et al. 2003).
Concrete is a building material that is not only strong and durable, but can also be produced in
ways that are environmentally friendly and architecturally moldable in esthetically pleasing
forms (National Building Museum 2004). With sustainable concrete structures and
infrastructure, the concrete industry can develop a sustainable future for generations to come.
Furthermore, buildings that are constructed to be both durable and environmentally safe often
lead to higher productivity because the buildings generally lead to better air quality and
therefore, higher productivity (Coppola et al. 2004). One example of the advantage of
sustainable concrete is buildings constructed with concrete that have reduced maintenance and
energy costs. Another is concrete highways, which reduce the fuel needed for heavily loaded
trucks. A third example of the benefits of sustainable concrete construction is illustrated in
insulating concrete homes that have energy reductions of up to 40 % (Cement Association of
Canada 2004).
The cement and concrete industries can make substantial contributions to sustainable
developments by creating and adopting technologies that can reduce the emissions of greenhouse
gases. The cement and concrete industries could contribute to meeting the goals and objectives
of the 1997 Kyoto Protocol (UNFCCC COP9 Report 2004). Among other things, Kyoto
7
Protocol requires to meet a target of reduction in GHGs to 1990 level. Those involved with the
manufacture of portland cement would have a huge impact on the sustainable development of the
concrete industry as a whole because currently cement production contributes slightly over 7%
of worldwide GHGs. Any future taxes on GHG emission would have noticeable and noteworthy
economic impact on the price of cement.
There are a number of characteristics that apply to innovative concrete products. First, they are
produced with precast or cast-in-place reinforced concrete elements that are made with portland
cement and pozzolanic materials that include renewable and/or recycled components. Second,
innovative concrete products are constructed to enhance the performance of concrete elements,
which may also contain recycled concrete as aggregates. High performance materials are
intended to reduce cross-sections and the volume of concrete produced. They are also intended
to increase the durability of concrete structures to minimize the maintenance needs of the
concrete construction, and limit the amount of non-renewable special repair materials that need
to be used in the maintenance of the concrete (Coppola et al.).
Concrete producers are creating sustainable solutions for many market sectors including
agriculture and construction. In agriculture, integrated waste management solutions have been
developed that convert manure into biogas, nutrient rich fertilizer, and reusable water. In
construction, industrial, commercial, and institutional buildings are being constructed so that
they are more energy efficient, have better air quality, and necessitate less maintenance
(McDonough et al. 1992).
8
U.S. foundries generate over 7 million tons (8 million tons) of by-products. Wisconsin alone
produces nearly 1.1 million tons (1.25 million tons) of foundry by-products, including foundry
sand and slag. Most of these by-products are landfilled. Landfilling is not a desirable option
because it not only causes a huge financial burden to foundries, but also liability for future
environmental costs, and restrictions associated with landfilling. One of the innovative solutions
appears to be high-volume uses of foundry by-products in construction materials (Naik and
Kraus 1999).
In addition, in 1996 the USA produced 136 million tons of construction and demolition (C & D)
debris, about 1.5 kg per person per day. About 25 to 40% of landfill space is C & D debris
(McKay 2004). If this trend continues, the cost of landfilling will continuously increase, as will
the potential health and environmental risks of landfill materials. Furthermore, the cost of
landfilling is escalating due to shrinking landfill space and stricter environmental regulations.
A study was reported in 1999 whose aim was to evaluate the environmental impact of controlled
low-strength materials (CLSM) incorporating industrial by-products such as coal fly ash and
used foundry sand (Naik and Kraus 1999). The results demonstrated that excavatable flowable
slurry incorporating fly ash and foundry sand as a replacement for up to 85% of fly ash could be
produced. In general, inclusion of both clean and used foundry sand caused a reduction in the
concentration of certain contaminants. The use of foundry sand in flowable CLSM slurry,
therefore, provided a favorable environmental performance.
9
Portland Cement
Portland cement is not an environmentally friendly material; its manufacture creates greenhouse
gas emissions; and, it also reduces the supply of limestone. As good engineers, we must reduce
the use of portland cement in concrete. We must use more blended cements.
The most energy intensive stage of the portland cement production is during clinker production.
It accounts for all but about 10 % of the energy use and nearly all of the GHGs produced by
cement production. Kiln systems evaporate inherent water from the raw meal and calcine the
carbonate constituents during clinker preprocessing (Worrell and Galtisky 2004).
Sources of CO2 and GHG emissions in the manufacturing of portland cement (Malhotra 2004)
are:
from calcinations of limestone = ± 50 – 55%;
from fuel combustion = ± 40 – 50%; and,
from use of electric power = ± 0 – 10%.
Innovative Cement Products
While the embodied energy linked to concrete is low, supplementary cementing materials
(SCM), especially fly ash, have been used by the concrete industry for over 70 years. Their use
can contribute to a further reduction of concrete’s embodied energy. When used wisely and
judiciously, SCM can improve the long-term properties of concrete. Fly ash can, and does,
regularly replace portland cement in concrete (Malhotra 2004; Naik et al. 2003; Mehta 2002).
10
One process that is even more environmentally friendly and productive is the use of blended
cements. Blended cements have been used for many decades. Blended cements and are made
when various amounts of clinker are blended and/or interground with one or more additives
including fly ash, natural pozzolans, slag, silica fume and other SCM. Blended cements allow
for a reduction in the energy used and also reduces GHG emissions (Malhotra 2004; Mehta
2002).
Most innovative concrete mixtures make use of SCMs to partially replace cement. The
advantages of blended cements include increased production capacity, reduced GHG emissions,
reduced fuel consumption in the final cement productivity, and recycling of SCMs (Worrell
2004; Cement Association of Canada 2004).
The manufacture of portland cement is the third most energy intensive process, after aluminum
and steel. In fact, for each ton of portland cement, about six million BTU of energy is needed
(Malhotra 2004; Naik and Kraus 1999).
Although cement production is energy inefficient, there have been major initiatives that have
reduced energy consumption (Worrell 2004). Of these, the most significant has been the
replacement of wet production facilities with dry processing plants. In addition, the cement
industry has also moved away from petroleum-based fuel use.
Despite these advances, there are still some shortcomings when energy use is evaluated for the
concrete industry. Dry process cement plants use pre-heaters, which increase the alkali content
11
of cement (Worrell 2004). Thus, researchers need to continue to develop ways to control the
alkali content without increasing the energy consumption levels of the cement (Coppola et al.
2004). Furthermore, current innovations and energy savings are linked to the amount of energy
consumption by converting wet-process to dry-process cement production and the number of
pre-heaters needed to complete the process (Worrell 2004).
For each million tons of capacity, a new portland cement plant costs over 200 million dollars.
The cost associated with the production of portland cement, along with the CO2 emissions and
energy issues, makes it unlikely that developing countries will be able to employ such
technology. Also, government regulations of GHGs will likely force the cement industry to
create blended cements and use supplementary materials for blended cements in order to meet
the societal development needs (Malhotra 2004; Worrell 2004)
To produce one ton of portland cement, 1.6 tons of raw materials are needed. These materials
include good quality limestone and clay. Therefore, to manufacture 1.6 billion tons of cement
annually, at least 2.5 billion tons of raw materials are needed (Wu 2000).
As good engineers, we must employ environmentally friendly materials to replace a major part
of portland cement for use in concrete. In the USA, these materials are primarily fly ash, slag,
silica fume, natural pozzolans, rice-husk ash, wood ash, and agricultural-products ash. These all
can be used to supplement the use of cement in concrete mixtures while improving product
durability.
12
One of the important benefits of the increased use of other cementitious materials is the
reduction of GHG emissions. With a replacement of cement with other recyclable resources, up
to 15% of worldwide CO2 emissions would be reduced. A replacement of 50% of cement
worldwide by other cementitious materials would reduce CO2 emissions by 800 million tons.
This is equivalent to removing approximately 1/4 of all automobiles in the world (Malhotra
2004)
Fly ash availability in the USA in 2002 was estimated at 100 million tons; by 2010 it is estimated
to be 160 million tons. Portland cement availability in 2002 was estimated at 80 million tons; by
2010 it is estimated to be 100 million tons. The fly ash disposal challenge, and the limited
availability of portland cement have the same solution: replace large amounts of portland cement
with fly ash to create durable and sustainable concrete.
The Hannover Principles - Design for Sustainability
In 1991, as the planning of the World’s Fair was underway, the City of Hannover, Germany
asked William McDonough and Michael Braungart to create sustainability principles to guide the
large-scale development of EXPO 2000 in Hannover. "The Hannover Principles - Design for
Sustainability" also include directives concerning the use of water. Although these guidelines
were created for the World Fair, they are still a good tool to guide current and future
development around the world (McDonough 1992).
Designers, planners, government officials, and all those who participate in the construction of
new buildings and infrastructures should use the Hannover Principles. A new design philosophy
has developed from these principles and should be included in the proposed sustainable systems
13
and construction in the future. There are a number of examples of societies that have created
sustainable and environmentally friendly communities. There is hope that the Hannover
Principles will inspire development and improvements that are committed to sustainable growth
with practical limits to create a sustainable and supportive future for communities and the world.
The Hannover Principles by William McDonough (McDonough 1992): Insist on rights of
humanity and nature to co-exist; recognize interdependence; respect relationships between spirit
and matter; accept responsibility for consequences of design; create safe objects of long-term
value; eliminate the concept of waste; rely on natural energy flows; understand the limitations of
design; and, seek constant improvement by the sharing of knowledge.
The Hannover Principles are not ―cast-in-concrete‖. They were devised to provide a tangible
document that could evolve and be adapted as our understanding of our interdependence with
nature becomes more important over time.
For sustainability, consider your actions on the following (McDonough 1992): materials—use
indigenous materials; land use—protect and create rich soil; urban context—preserve open
spaces; water—use rainwater and gray-water (shower, sink, bath and laundry excess); wastes—
recycle, air—create clean air; energy—use solar & wind energy, recycle waste energy;
responsibility to nature—create silence; and, maintenance—minimize or eliminate for future
generations.
Materials are key to creating sustainable and responsible concrete designs. In order to ensure that
14
the most effective and environmentally friendly materials are being used, the entire life-cycle of
the structure should be taken into consideration. Material choice should include anticipation of
the extraction, processing, transport, construction, operation, disposal, re-use, recycling, off-
gassing and volatile organic compounds (VOC) associated with the material (McDonough 1992).
According to McDonough, constructions should be flexible to serve a variety of different needs
(e.g., today’s storage building can be tomorrow’s school). Adapt materials that are sustainable in
their process of extraction, manufacture, transformation, and degradation, as well as recyclability.
Consider toxicity, off-gassing, finish, and maintenance. Recycling is essential. Make allowance
for disassembly and reuse. Plan for reuse of the entire structure in the future. Minimize use of
hazardous chemicals. Eliminate waste that cannot be part of a naturally sustainable cycle. Any
solid wastes remaining must be dealt with in a non-toxic manner. Life-cycle costs must be
analyzed. Life-cycle cost analysis is a process to evaluate energy use and environmental impact
during the life of the product, process, and/or activity. This process must include extraction and
processing of raw materials, manufacturing, transportation, maintenance, recycling, and returning
to the environment. Evaluate and understand costs and benefits in both the short-term and long-
term. Use recycled concrete for aggregates.
For the sustainability of the cement and concrete industries, use less water and portland cement
in concrete production; and use more blended cements and tailor-made chemical admixtures.
The devastation of air is a global problem, regardless of the locality in which the pollution is
created (McDonough 1992). The overall design of concrete structures must not contribute to
atmospheric degradation. Those involved in the cement and concrete industries must evaluate
ozone depletion and global warming throughout the construction and planning process. A major
15
contribution to this effort will be the use of more blended portland cement to minimize global
warming.
Water resources are being depleted by various uses (Bourg 2004). Therefore, potable water
should be conserved to serve life-sustaining needs rather than infrastructural needs. Rainwater
and surface run-off water can be used as a water conservation method by recycling these water
resources in construction instead of using potable water. Gray water should be recycled and used
for grass, shrubs, plants, trees, and gardens; as well as for concrete production (McDonough
1992). Furthermore, mixtures with less water should be developed with new technologies to
create mortar and concrete containing a minimal amount of water.
Benjamin Franklin said over 200 years ago in Poor Richard’s Almanac, ―When the well’s dry,
we know the worth of water.‖ Many facilities may have requirements that can be completed
with non-potable water. By using non-potable water, a significant amount of money can be
saved by avoiding or reducing potable water purchases and sewerage costs. To be as effective as
possible, non-potable water construction and building uses should be identified early to be the
most cost-effective. Four ways to utilize and recycle water are to reuse water on site for repeated
cycles of the same task, treat and reuse water on site for multiple purposes, use gray water after
solids have been eliminated, and collect non-potable water from sources such as rainwater, lakes,
rivers and ponds for use in construction (Bourg 2004).
Energy efficiency, providing the same (or more) services for less energy, helps to protect the
environment. When less energy is used, less energy is generated by power plants, thus reducing
16
energy consumption and production. This in turn reduces GHGs and improves the quality of the
air. Energy efficiency also helps the economy by saving costs for consumers and businesses.
According to Mc Donough (1992): (a) use buildings’ thermal inertia (e.g., concrete building’s
mass allows it to retain heat); (b) use day lighting and natural ventilation; (c) use wind power and
solar power; (d) recycle waste energy; (e) judiciously use color materials on surfaces; (f) reduce
heat-islands in buildings; and, (g) manage and moderate micro-climates of buildings.
Waste Materials
Contractors should reuse industrial by-products and post-consumer wastes in concrete. Post-
consumer wastes that should be considered for use in concrete include glass, plastics, tires, and
cans (aluminum, steel, and tin). To do this successfully, contractors must watch for harmful
hydration reactions and changes in volume. The recycling of industrial by-products has been
well established in the cement and concrete industries over the past couple of decades (UWM-
CBU 2004). The use of coal fly ash in concrete began in the 1930s, but volcanic ash has been
used in mortar and primitive concrete for several millenniums in Egypt, Italy, Mexico, and India.
The use of by-products such as rice-husk ash, wood ash, silica fume and other pozzolanic
materials, in addition to coal fly ash, can help to reduce the need for portland cement in addition
to creating more durable concrete and reducing greenhouse gas emissions (Malhotra 2004;
Mehta 2002; ACI 2004). This will also contribute to the improvement of air quality, reduction of
solid wastes, and sustainability of the cement and concrete industry (Mehta 2002)
In summary, for sustainability of the cement and concrete industries: use less portland cement;
use less water; use application-specific high-quality, durable aggregates; and, use chemical
17
admixtures.
Fundamental laws of nature state that we cannot create or destroy matter; we can only affect how
it is organized, transformed, and used. Obey the rules of nature: use only what you need and
never use a resource faster than nature can replenish it.
Resources are extracted from the earth by 20% more than the earth produces. Therefore, what is
consumed in 12 months will take 14.4 months to be replenished. The use of sustainable
development procedures will reduce that rate (Time Magazine 2002). ―The issue is not
environment vs. development or ecology vs. economy; the two can be (and must be) integrated‖
(Ricoh Company 2004).
Conclusions
As Kofi Annan, U.N. Secretary General, said in 2002, ―We have the human and material
resources needed to achieve sustainable developments, not as an abstract concept but as concrete
reality‖ (Time Magazine 2002). Professionals involved in the cement and concrete industries
have the responsibility to generate lasting innovations to protect both the industries’ future
viability and the health of our environment. Large volumes of by-product materials are generally
disposed in landfills. Due to stricter environmental regulations, the disposal costs for by-
products are rapidly escalating. Recycling and creating sustainable construction designs not only
contributes to reduced disposal costs, but also aids in the conservation of natural resources. This
conservation provides technical and economical benefits. It is necessary for those involved in
the cement and concrete industries to eliminate waste and take responsibility for the life cycle of
18
their creations. In order to be responsible engineers, we must all think about the ecology, equity,
and economy of our design (McDonough 1992).
We must apply forethought into direct and meaningful action throughout our development
practices. Sustainable designs must be used as an alternative and better approach to traditional
designs. The impacts of every design choice on the natural and cultural resources of the local,
regional, and global environments must be recognized in the new design approaches developed
and utilized by the cement and concrete industries.
References
ACI Board Advisory Committee on Sustainable Development (2004). ―White Paper.‖
Bourg, J. (2004). ―Water Conservation.‖
<http://www.wbdg.org/design/resource.php?cn=0&cx=0&rp=50> (2004).
Cement Association of Canada (2004). ―Concrete Thinking for a Sustainable Future.‖
<http://www.cement.ca/cement.nsf/e/6ABDCDE126A87A6C85256D2E005CC53B?OpenDocu
ment > (November 15, 2005).
Coppola, L., Cerulli, T., and Salvioni, D. (2004). ―Sustainable Development and Durability of
Self-Compacting Concretes.‖ Eighth CANMET/ACI International Conference on Fly
Ash, Silica Fume, Slag and Natural Pozzolans in Concrete, Las Vegas, NV, 29–50.
<http://www.cbu.uwm.edu> (June 30, 2004).
Malhotra, V. M. (2004). ―Role of Supplementary Cementing Materials and Superplasticizers in
Reducing Greenhouse Gas Emissions.‖ Proc., ICFRC International Conference on Fiber
Composites, High-Performance Concrete, and Smart Materials, Chennai, India, 489-499.
19
McDonough, W. P. (1992). ―The Hannover Principles: Design for Sustainability.‖ EXPO 2000,
The World’s Fair, Hannover, Germany.
McKay, D. T. (2004). ―Sustainability in the Corps of Engineers.‖ a paper presented at the
Technical Session Sponsored by the ACI Board Advisory Committee on Sustainable
Developments, Washington, D. C.
Mehta, P. K. (2002). ―Greening of the Concrete Industry for Sustainable Development.‖ ACI
Concrete International, V. 24(7), 23-28.
Naik, T. R., and Kraus, R. N. (1999). ―The Role of Flowable Slurry in Sustainable Developments
in Civil Engineering.‖ Proc. of the ASCE Conference on Materials and Construction -
Exploring the Connection, Cincinnati, Ohio, 9 pages.
Naik, T. R., Kraus, R. N., Ramme, B. W., Siddque, R. (2003). ―Long-Term Performance of
High-Volume Fly Ash Concrete Pavements.‖ ACI Materials Journal, 100(2), 150-155.
National Building Museum (2004). ―Liquid Stone: New Architecture in Concrete.‖ Washington,
D.C.
Ricoh Company, Ltd. (2004). ―Sustainable Developments: Planning for our Future.‖ Time
Magazine.
Swedish National Testing and Research Institute (2003). ―Concrete for the Environment.‖
Published on Behalf of the Nordic Network Concrete for Environment, Boras, Sweden, 8
pages.
Time Magazine, (2002). p. A8.
UNFCCC COP9 Report (2004) ―Delivering the Kyoto Baby.‖ Refocus, International Renewable
Energy Magazine, Kidlington, Oxford, UK, 52-53.
United States House Resolution 394 (2004).
20
UWM-CBU (University of Wisconsin-Milwaukee- Center By-Product Utilization)
<http://www.cbu.uwm.edu/> (2004).
Worrell, E., and Galtisky, C. (2004). ―Energy Efficiency Improvement and Cost Saving
Opportunities for Cement Making.‖ Lawrence Berkeley National Laboratory, Publication
No. LBNL-54036, 62 pages.
Wu, Z. (2000) ―Development of High-Performance Blended Cement.‖ Ph. D. thesis, T. R. Naik
advisor, Department of Civil Engineering and Mechanics, College of Engineering and
Applied Science, 177 pages.
21
Fig.1. Limestone for Cement and Concrete (modified from Worrell and Galtisky 2004)
Limestone
Crusher
Grinder
Kiln
Grinder
Concrete
Aggregates
Raw meal
Clinker Additives
Cement
22
Table 1. CO2 Emissions in 2002
Country Percent CO2
U.S.A.
E.U.
Russia
Japan
China
India
25
20
17
8
>15
>10
Total CO2 emissions worldwide: 21 billion tons (Malhotra 2004)