9C-19 Instrumentation / Driver Info. / Horn:

Installation

Reverse removal procedure noting the following.

• When installing each part, be careful not to catch any

cable or wiring harness.

• Tighten instrument panel mounting bolts to specified

torque

Tightening torque

Instrument panel mounting bolt (a): 23 N·m (2.3

kgf-m, 17.0 lb-ft)

• Tighten steering column mounting nuts referring to

“Steering Column Removal and Installation in Section

6B”.

• Enable air bag system referring to “Enabling Air Bag

System in Section 8B”.

Information Display (Clock) Removal and

InstallationS7RS0B9306016

Removal

1) Remove information display (clock) garnish (1) from

instrument panel (2) pulling it arrow direction as

shown.

2) Remove information display (clock) (3) from

instrument panel (2) pulling it in arrow direction

shown in figure.

3) Disconnect information display (clock) coupler.

Installation

Reverse removal procedure.

Audio Unit Removal and InstallationS7RS0B9306017

Removal

1) Disconnect negative (–) cable at battery.

2) Remove globe box referring to Step 6) of “Instrument

Panel Removal and Installation”.

3) Remove 2 mounting bolts (1).

4) Disconnect electrical connectors from audio unit.

5) Remove audio unit (2) from instrument panel.

Installation

Reverse removal procedure.

Front Speaker Removal and InstallationS7RS0B9306018

Removal

1) Remove front door trim referring to Step 1) to 3) of

“Front Door Glass Removal and Installation in

Section 9E”.

2) Remove 3 front speaker mounting screws (1).

3) Remove front speaker (2) from front door panel (3).

4) Disconnect front speaker coupler from front speaker

(2).

Installation

Reverse removal procedure.

(a)

(a)

I4RS0B930013-01

1

2

I4RS0A930032-01

3

2

I4RS0A930025-01

2

1

1

I4RS0B930014-01

1

2

3

I4RS0A930027-01