SWASTIK’S SHRINK WRAPPING MACHINE DOUBLE TUNNEL, HORIZONTAL ROTATINGBOTTLE. MODEL.

(Suitable for glass/PET/plastic filled or empty bottle full & certain partof body shrink sleeve wrapping.)

The Above Machine Is A SpeciallyDesigned Machine And Changes Will/Can Be Made To The Machine To SuitThe Requirement Of The Product, But IfThe Changes/ Modifications Are Vast,

Cost Shall Vary.

Machine Operation

Place the printed labels on the bottle/box (product) and the product is to be placed onthe running conveyor, if the bottle/box (product) is round the bottle/product wouldrotate between two rollers and forward, and if it is flat, it will move forward from one rollerto the other. When you place the product on the conveyor and when it enters the 1 st

tunnel the following things take place:-WHEN THE BOTTLE/BOX (PRODUCT) IS IN THE SEMI FINISH-HEAT SHRINKTUNNEL:-In the first tunnel, there is a pre-heat shrink system, the hot air will act as ahelping hand, and allow uniform and equal shrink wrapping of bottle/box (product). Thistunnel uses a blower fan which runs at a low RPM so as to circulate the hot air and alsoit keeps the label at its place, while going through the pre-heat shrinking process. Afterthe first tunnel process, the product would head into the 2nd tunnel, the operations thatwould take place in the 2nd tunnel are as follows:- WHEN THE BOTTLE/BOX (PRODUCT) IS IN THE FINISH-HEAT SHRINK TUNNEL:-Now the bottle/box (product) moves on to the finish shrink tunnel which, consists ofhigh temperature & high air blowing power which enables the shrinking to get completedwith an excellent result. There is also a cooling fan unit to cool down the shrinkedproduct. WHEN THE BOTTLE/BOX (PRODUCT) IS IN THE FINISH-HEAT SHRINK TUNNEL:-When the bottle/box (product) is out of the finish heat shrink tunnel, the bottle goes intothe cooling tunnel, were the cooling fan(s) supply air on to the top surface, so as to coolor to decrease the heat.With this all the operations are completed, if the bottles are light in weight andunbreakable, let the bottles/box (product) fall off from the conveyor tunnel on to a boxkept right below the conveyor tunnel, and if in case the is heavy in weight and breakable,pick the bottles manually from the conveyor tunnel, and keep it in a collecting box or acollecting table.

(THIS IS A SPECIAL PURPOSE MODEL, DESIGNED FOR SHRINK WRAPPING OF ‘DIFFICULT’ SIZE AND SHAPE OFBOTTLES/BOX AND ANY OTHER PRODUCTS.)

Salient Features

• The pre-heat shrink tunnel and finish tunnel is specially designed for odd or ‘difficult’ shaped product.

• Both the tunnels have heaters on all the four sides, each heater has individual control for flexibility.

• Both the tunnels are equipped with separate digital temperature control.

• Specially designed S.S tubular finned heaters for minimum power consumption and maximum heat transfer.

• Heavy duty turbo blower for effective and efficient hot air circulation.

• Class insulation provided with glass ceramic/glass wool and asbestos/calcium silicate sheet for machine panel and silicontubing for conveyor rods.

• Over backed heat resistant power coated used.

• Individual A.C. frequency drive controller is used to vary the speed of conveyor and blowers individually.

• Auto Digital temperature control for each tunnel.

• Cooling fan tunnel specially provided to bring the finished product to optimum Temperature.

Technical Specifications

MODELS HRSRK/200/Double HRSRK/300/Double HRSRK/450/Double HRSRK/600/Double

MACHINE Dim w x h x l(mm)

800 x 1200 x 3500 900 x 1500 x 5000 1000 x 1600 x 4700 1100 x 1600 x 5200

Semi Finish Shrink tunnelDim. w (ID) x h x l (mm)

220 x 130 x 800 325 x 225 x 1150 475 x 250 x 1200 625 x 300 x 1500

Finish Shrink Tunnel 220 x 130 x 800 325 x 200 x 1150 475 x 250 x 1200 625 x 300 x 1500

Cooling Fan Tunnel 220 x 130 x 700 325 x 200 x 800 475 x 250 x 800 625 x 300 x 800

Power For Heaters 9KW, 440v 16KW, 440v 20KW, 440v 26KW, 440v

Power For Conveyor andBlower

1 HP AC 440V 1.5 HP AC 440 V 2 HP AC 440 V 3 HP AC 440 V

Speed Of The Conveyor Variable by A.Ccontrol(2 – 5 mts/min)

Variable by A.Ccontrol(2–5 mts/min)

Variable by A.Ccontrol(2–5 mts/min)

Variable by A.C control(2–5 mts/min)

Temperature 80-300 C 80-300 C 80-300 80-300

2