switch mode power supplies - cathodic protection co … switch mode power supplies (smps) cathodic...

2
www.cathodic.co.uk Switch Mode Power Supplies (SMPS) Cathodic Protection Co Ltd’s Switch Mode Power Supplies (SMPS) are ideal for a variety of low power applications. The wider benefits of the SMPS include: Standardised design yet adaptable to client’s requirements Low cost Simplified spares holding High efficiency, resulting in lower running costs Excellent reliability Small size, allowing for easy configuration of multiple channel systems Compatible with CPCL’s Remote Control and Monitoring System T: +44 (0)1476 590666 E: [email protected] Cathodic Trust SMPS A4 Leaflet.indd 1 08/09/2016 19:56

Upload: doanhanh

Post on 11-May-2018

234 views

Category:

Documents


1 download

TRANSCRIPT

www.cathodic.co.uk

Switch Mode Power Supplies (SMPS)

Cathodic Protection Co Ltd’s Switch Mode Power Supplies (SMPS) are ideal for a variety of low power applications.

The wider benefits of the SMPS include:

• Standardised design yet adaptable toclient’s requirements

• Low cost

• Simplified spares holding

• High efficiency, resulting in lower running costs

• Excellent reliability

• Small size, allowing for easy configurationof multiple channel systems

• Compatible with CPCL’s RemoteControl and Monitoring System

T: +44 (0)1476 590666E: [email protected]

Cathodic Trust SMPS A4 Leaflet.indd 1 08/09/2016 19:56

The Control You Need…...Anywhere

Return to [email protected]

To help us understand your requirements and offer an accurate quote, simply complete the form below:

DetailsEnvironment Indoor / Outdoor

Safe / Hazardous DC Outputs 12V / 12A

24V / 6A Reference Modules (8 channels per) AC Input Enclosure Type RMCS required?

SMPS• Input Supply: 90-260VAC or 24-48VDC

• 144W (0-24V 0-6A or 0-12V 0-12A)

• 1mV / 1mA Resolution

• Mains powered efficiency up to 95%

• Integrated fast switched output ofinstant off measurements

• Constant Voltage, Constant Currentand Auto-Potential operation(Auto-Potential operation requiresReference Module)

Reference Module• Input Supply: 24VDC

• 8 Isolated Analogue Inputs

• -5V to +5V Range

• >20Mohm Input Impedance

• 1mV Resolution

• Low pass filters on all inputs to eliminate AC noise

• Trigger input allows simultaneous data captureacross multiple Reference Modules

• Designed to meet EMC & Safety Standards

SMPS & Reference Module• Integrated 4mm Test Sockets for

DC output voltage and current

• Box dimensions 60mm x 235mm x 115mm

• Temperature range:

- Operating: -20 to +70°C

- Storage: -40 to +85°C

• Designed to meet applicable EMC & Safety Standards

• Built to meet requirements of BS EN12696cathodic protection of steel in concrete

• No fuses required

• Fully compatible with CPCL’s Remote Monitoring & Control System (RMCS)

• RS485 Modbus/RTU Communications Interface

T: +44 (0)1476 590666E: [email protected]

Cathodic Trust SMPS A4 Leaflet.indd 2 08/09/2016 19:56

bulbmbp
Sticky Note
Marked set by bulbmbp