swivel light user instructions rotate cam counter clock wise to open battery compartment spare...
TRANSCRIPT
Swivel Light User Instructions
Rotate cam counter clock wise to open battery compartment
Spare battery can be installed in secondary chamber tip Down(power will only be pulled
from battery installed tip up)
Locked /Center
Position
Three functional switches
Unlocked mode /
Right Position(Visible Light)
IR mode /Left Position
(Only functional
light)
Light is fully functional with 1 AA battery (Either chamber can be used)
This will allow for maximum run time and light out-put Run time and Light out-put is half the maximum run time and
light out-put
Insert 2AA Batteries Tip end first
Battery Compartment and Installation
Swivel Light User Instructions
White—Tail Switch
Center Light
Four visible colored lights (Unlocked mode) / One IR light(night vision optic visible)
Green –Right Button
Lower Right Light
Red –Center Button
Upper Left Light
Blue -- Left Button
Upper Right Light
IR--Left Position
Lower Left Light
Colored LightsPress 1X -- LowPress 2X -- MediumPress 3X -- High
Three modes of operation
(if light has been on for more than three seconds, next press will extinguish the light)
White LightPress 1X -- LowPress 2X -- MediumPress 3X -- High
Swivel Light User Instructions
Moving the locking bar to the locked position while in operation with disable all light functions. Move lever to the left Marked IR
position automatically engages the IR light (ONE level of brightness)
IR mode (night vision optic visible)
Depressing the tail switch while in IR mode enables
the IR flash.
LockedUnlocked mode
Quick Extinguishing FunctionTwo functional modes -- Constant on OR IR Flash
Constant on Flash mode
Depressing the tail switch while on IR flash will return
the light to constant on
Swivel Head Rotates 130 degrees –
Clip attaches to OTV / FLC
Depress Side button to rotate and lock into place at intervals of 90 and 180 Degrees
130 Deg.
Hook and Tab design to secure
light