sxr can locations
DESCRIPTION
SXR Can locations. 1/30/06. Model: stb-machine_asm-0. Rep. dog collar se340-001.drw. 4. 3. 5. 2. 6. 1. 7. 8. 1. 2. .517” Gap. Minimum clearance at the final machine position with cans 1 at 2.60” above spool center and cans 2 - 4 and 6 - 8 can be at 3.0” above center. - PowerPoint PPT PresentationTRANSCRIPT
SXR Can locations
1/30/06
Model: stb-machine_asm-0. Rep. dog collar se340-001.drw
.517” Gap
Minimum clearance at the final machine position with cans 1 at 2.60” above spool center and cans 2 - 4 and 6 - 8 can be at 3.0” above center.
Only the can pair 1 and 6 is set by MC clearances.
1
1
2
7
2
8
6
345
1
1
2
2
The can 1 pair must be off the spool during final machine assembly.
7
8
7
8
6
Can 6 must be at a value of 2.60” above the spool centerline to meet the minimum clearance during final machine assembly. With can 6 at 2.60” above center the assembly clearance is .574”. If can 6 is left off during assembly then it can be placed 3.0” above center (see next slide).
Can 6 has a 1.97” spacing when positioned 3.0” above inner surface centerline at the final machine position.
6