synchronization nagasaki business office between creation and technology · synchronization between...
TRANSCRIPT
Synchronization betweenCreation and Technology
Fudo Giken Industry Co., Ltd. C O M P A N Y P R O F I L E
Nagasaki（Main Office）
Kitakyushu
Takasago
Kanagawa
Nagasaki Business Office Postal Code No. 850-0063 Ryoko Building Annex, 1st to 4th Floor 5-7, Akunoura-machi, Nagasaki City, Nagasaki Prefecture, Japan TEL : +81-95-861-7514 FAX : +81-95-861-1315 Mail: [email protected]
Main Office Postal Code No. 850-0063 Ryoko Building, The 2nd Annex 8-12, Akunoura-machi, Nagasaki City, Nagasaki Prefecture, Japan TEL: +81-95-861-1638 FAX: +81-95-861-5738 Mail : [email protected]
Kitakyushu Branch Office Postal Code No. 803-0818 NS Building, 4th Floor 6-1, Kata-machi 1-chome, Kokura North Ward, Kitakyushu City, Fukuoka Prefecture, Japan TEL.: +81-93-967-8220 Mail: [email protected]
Takasago Business Office Postal Code No. 676-0008 The 3rd Takasago Ryoko Building, 3rd Floor 8-30, Niihama 2-chome, Arai-cho, Takasago City, Hyogo Prefecture, Japan TEL.: +81-79-443-2423 FAX.: +81-79-443-3895 Mail : [email protected]
Kanagawa Business Office Postal Code No. 221-0835 Kubota Building 8th Floor 31-5, Tsuruya-cho 3-chome, Kanagawa Ward, Yokohama City, Kanagawa Prefecture, Japan TEL: +81-45-290-6131 FAX: +81-45-321-3898 Mail: [email protected]
“Do not give in to yourself. Change yourself.”“Do not give in to the times. Change the trend of the times. ”
By honoring the essence of this slogan, we are convinced that, when the employees have overcome their present selves through development as individuals, there will be an inevitable and consequent development of the company.In brief, our company’s human resources are the basis of our company. This philosophy places importance on the nurturing of individuals. With the action guidelines of “Challenge,” “Hands-on approach,” and “Promptness,” in our bottom-up corporate culture, the opinions of the front-line staff can be promptly reflected to the business and in a forward-looking discussion full of passion and challenges, at times becoming a risk taker on a top-down managerial judgment, without swinging between elation and desperation by the trends of large companies, we are seeking to progress as a company seeking more profits through highly sophisticated technology.
To be always vibrant and energetic as individuals and as a company
Human resources are the basisof our company
President and Representative DirectorHirokuni Hamamoto
"Conscience" "Ingenuity" "Action"We are as “Human resources are the basis of our company’s success” , and do not forget a faithfulness all the time, have a originality, propose the solution to our customers and perform it surely. Brightly, positively and drawing the dream, and it is our wish to contribute to the happiness of the employee and the development of the society.
Mission StatementWe are contributing to the creation of our customer continuously as a true technical group by providing the product of the high quality and the service. We plan the true technology and the improvement of the human skill as the engineering company, and respect the rules and responsibility, and will also grow up the company with the passion and the high creative mind for that.
1 2
Business LineupICT and Digital Solutions
Since the foundation in 1964, we have been contributing to the designs of thermal power plants for Mitsubishi Heavy Industries, Ltd. (currently Mitsubishi Hitachi Power Systems, Ltd. (MHPS) and we have gradually expanded our expertise to the designs of boilers, steam turbines, gas turbines, machines, civil engineering and construction, piping, and instrumentation and control. Because saving fossil fuels is an urgent issue in recent years, the development of next-generation power generating technologies, such as high-efficiency IGCC and biomass power generation, is under way. Future designs of power plants must respond to the demands of the times. We will continue to improve our technology.
We plan and design the machines to be installed on large ships such as tankers and passenger ships, including boilers and turbines for ships and exhaust turbine superchargers. These machines need to be designed according to the rules required exclusively for ships and the usage conditions specific to ships to ensure safe and comfortable maritime operation. We are constantly improving our skills to meet such requirements.
We design varied industrial machines for manufacturing industrial products, such as tire production machines, in an integrated manner. We create basic designs and detailed designs, and even design electrical control.We respond to the diverse needs of our customers ranging from designing components and assemblies of any kind to factory automation.
We develop programs to streamline designs using 3D-CAD and create animations that simulate the procedures for assembling and disassembling devices based on solid models. Our product, 3+ System, can centrally manage PC resources in a virtual environment.
We support the development that is directly connected to improving the reliability and quality of products (mainly automobiles) as systems. We not only plan evaluations and manage component specifications but also conduct unit tests and system tests to check whether devices comply with the design specifications. If any device should fail to conform to the specifications, we provide the designers with analysis and feedback. In addition, we design and manufacture instrumentation and control devices, software, benches, tools, and wire harness for unit and system tests.
Thermal Power Station Whole View
MAC-B Type Auxiliary Boiler (Provided by Messrs. MHIMME)
Vehicle Control Equipment
Animation Model Diagram
Tire Vulcanizing Machine for Vehicle (Provided by Messrs. MHIMT)
Design Support for Energy and Environment
Design Support for Maritime Machinery and Engines
Design Support for Machinery and Facilities
Development Support for Electric and Electronic Devices
Fudo Giken Industry Co., Ltd.
Energy and Environment
Machinery and Facilities
Maritime Machinery and Engines
Electric and Electronic Devices
ICT and Digital Solutions
3 4
Design Support for Energy and Environment
Boiler Designs
Gas Turbine Designs Steam Turbine DesignsWe develop gas turbines and assist in production designs for gas turbine combined cycle (GTCC) power generation, which is clean, highly efficient thermal energy. Our role is to create structural plans, create detailed designs, and provide different types of analysis by using 3D software. We also provide customer services and technical support through our thorough support system.
We design land steam turbines. The ultimate purpose of a turbine is to generate electrical energy. Turbines are usually used in thermal power plants and designing turbines requires precise techniques. We create plans and detailed designs for rotors, cylinders and piping.
Pipe Arrangement Designs
With using the piping stress analysis system (Auto PIPE), we analyze the primary stress and the thermal displacement stress of piping systems to determine the appropriate pipe routes and provide support designs. The plant integration system, which creates basic plans and detailed designs in 3D, can easily optimize piping plans and perform interference checks. The system can also compute stress and create support designs.
Instrumentation and Control Designs
We design steel-frame or concrete structures basic and detailed in civil engineering and construction for various power generation plants and waste treatment facilities at home and abroad, and upon request pro-vides supervision of construction work on site. When building a plant, we create plans and detailed designs that best suit the purpose of the building to meet the high requirements of our customers.
Civil Engineering and Construction Designs
We design the instrumentation and controls not only for maintaining the operating status of power plants, but also for checking the status of the facilities in the plant and the controls for operating auxiliary devices. Also we provide technical support for control devices in designing, manufacturing, shipping and on-site business. The information collected by the controls is sent to the central control operation room, so that the facilities could be monitored and controlled automati-cally and smoothly.
Nuclear Power Generation Designs
We support the development designs for fast breeder reactors (FBR) and the International Thermonuclear Reactor (ITER). We plan the arrangement of devices, create structural designs, and perform varied analysis by using 3D software. We also support the restart of nuclear generation facilities in Japan and design the specific power generation facilities that require strategies against serious accidents. We provide an extensive support system such as sending technicians and dispatching required personnel to local sites.
Creating Something of the ValueFor the responding to a variety of the needs,we are aiming at the certain trust design group with the technique that is a further high level.
Conventional Type Coal Burning Boiler (Provided by Messrs. MHPS)
Exhaust Gas Boiler for a combined cycle (Provided by Messrs. MHPS)
Plant Pipe Arrangement Plant Building
Central Control Operation Room Nuclear Power Generation� Whole ViewGas Turbine
(Provided by Messrs. MHPS)Steam Turbine
(Provided by Messrs. MHPS)
We design the boiler which is the heart of the thermal or combined power generation plant. The function of the boiler is to apply thermal energy to water to generate high temperature and pressure steam and supply it to the turbine. In the thermal power generation plant, thermal energy is from the fuel such as coals or oil, while in the combined power generation plant, thermal energy is of hot exhaust gas after rotating the gas turbine.With extensive design experiences over the years, we create structural plans and detailed designs for boilers, combustion equipment, ducts, piping and supporting structures in thermal power plants. Because saving fossil fuels is an urgent issue in recent years, we also contribute our expertise to next-generation power plants such as high-efficiency IGCC and biomass power generation.
5 6
Development Support for Electric and Electronic Devices
Design Support for MaritimeMachinery and Engines
ICT and Digital Solutions
Design Support for Machinery and Facilities
Control System DevelopmentWe design and develop the hardware and software required for measuring, controlling, and testing electric and electronic devices. Mainly, we support the de-velopment and verification of car-mounted control units as independent units and as in-vehicle systems. We create the systems for processing and verification, and manage and operate in-vehicle network information.
Quality Assurance for Electric and Electronic DevicesWe support in assuring the reliability and quality of electric and electronic devices. Mainly, we manage the progress of device development, create benches for evaluation systems, and conduct tests for assuring reliability. We also contribute to improving the per-formance of self-diagnostic functions in automobiles.
Instrumentation and Control Device ManufactureWe design, prototype and manufacture the instru-mentation and control devices that are required for evaluating products and the control devices used in production. We also install the devices in actual machines, perform trial runs, and provide on-site solutions.
Experiments and Creating Environment for ExperimentsWe conduct unit tests and system tests for car-mounted electric and electronic devices. In the development stage, we check the functions and performance of the devices. In the actual vehicle stage, we investigate and analyze the failures and malfunctions. Our primary role is to send feedback to the designers to improve quality. We also manufacture benches and tools for checking functions and performance.
Maritime Boiler and Supercharger DesignsWe create structural plans and detailed designs for boilers and turbines for ships and exhaust turbine superchargers which are to be installed on large ships such as tankers and passenger ships. We also provide customer services and technical support through our thorough support system.
Industrial Machinery DesignsWe design industrial machines for manufacturing and testing varied industrial products, such as tire production machines and carrier devices. Using our accumulated know-how based on machine elements, we support machine designs in an integrated manner, ranging from basic plans to detailed designs to control.
ICT System DevelopmentOur internal Linux-based servers are useful to perform a variety of work, ranging from network management to system development and operation to maintenance to security management. We are building and virtualizing networks so that users can always work in an efficient manner. We also use this technology to develop Thin Client Systems.
Digital ContentOur 3D-CAD and animation technology using computer graphics enable us to see what cannot be seen. This is helpful to understand the internal structures and workings of a giant, complex device. This technologies are also useful for exhibits and promoting products.
Control System Experiments Control Equipment
MET Supercharger Machine (Provided by Messrs. MHIMT) Tire Vulcanizing Machine for
Truck and Bus (Provided by Messrs. MHIMT)
Image DiagramThin Client System (Self-Developed Product)
Electric Equipment Image Diagram for Vehicle Instrumentation and Control Equipment
7 8
Company History
BUSINESSPERFORMANCE
Main Customer :Mitsubishi Hitachi Power Systems , Ltd. Mitsubishi Heavy Industries, Ltd. Nissan Motor Co., Ltd. MHPS Engineering Co., Ltd. Mitsubishi Heavy Industries Marine Machinery & Engine Co., Ltd. Mitsubishi Heavy Industries Machinery Technology Corporation. NS Plant Designing Corporation
Affiliated CompanyCADWORKS Limited
Company ProfileLocation of Head Office : Ryoko Building, 2nd Annex 8-12, Akunoura-machi, Nagasaki City, Nagasaki Prefecture, Japan Establishment : January 22nd, 1964 Capital : 24 Million Japanese Yen Annual Sales Amount : 3 Billion and 159 Million Japanese Yen (From April, 2014 to March, 2015） Number of Employees : 347(As of April, 2016) Our Bank : The Shinwa Bank, Ltd. The Bank of Tokyo-Mitsubishi UFJ, Ltd.
Corporate Governance Compliance Quality and Information Management
We consider meeting compliance requirements is one of top-priority issues of management and we have the compliance committee. We not only conform to the rules and regulations required for corporate activities but also conduct them sincerely, fairly and transparently, conforming to social norms.
We strive to enhance corporate governance to respect stockholders, customers and emplyees, ensure fair management, and increase management vitality. As a company needed in the society, we comply with the regulations, acknowledging that the basis of corporate governance is compliance.
1964.01
1970.09
1991.11
1992.09
1993.04
2001.11
2006.09
2007.01
2007.09
2010.10
2011.12
2012.10
2013.06
2015.05
Established “Fudo Giken Industry Incorporated Company.”, and opened “Business Branch Office” in Takasago City, Hyogo Prefecture at the same time.
Changed the organization of company to “Company Limited”.
Established an affiliated company “CADWORKS Incorporated Company” due to the business expansion of System Development Division.
Increased the capital to 24 Million Japanese Yen.
Takasago Business Branch Office is promoted to “Takasago Business Office”.
Obtained ISO 9001:2000 version
Opened “Kanagawa Business Office” in Isehara City, Kanagawa Prefecture.
Reorganized "Nagasaki Technology Headquarters" to “Nagasaki Business Office”
Moved the Kanagawa Business Office to Yokohama City, Kanagawa Prefecture.
Completed the up-dating and registration to the version of ISO9001:2008 at the Head Office, Nagasaki Business Office and Takasago Business Office.
Opened “Kitakyushu Business Branch Office” in Kitakyushu City, Fukuoka prefecture.
Acquired the version ISO9001:2008 at “Kanagawa Business Office”.
Moved the business office (in the same Yokohama City) for the business expansion of the Kanagawa Business Office.
Moved the business office (in the same Kitakyushu City ) for the business expansion of the Kitakyushu Business Branch Office.
We obtained ISO 9001:2000 in 2001 and updated to ISO 9001:2008 in 2010.We established the information security management rules to clarify the protection policy for information and perform complete management of information.
9
Synchronization betweenCreation and Technology
Fudo Giken Industry Co., Ltd.
Synchronization betweenCreation and Technology
Fudo Giken Industry Co., Ltd. C O M P A N Y P R O F I L E
Nagasaki（Main Office）
Kitakyushu
Takasago
Kanagawa
Nagasaki Business Office Postal Code No. 850-0063 Ryoko Building Annex, 1st to 4th Floor 5-7, Akunoura-machi, Nagasaki City, Nagasaki Prefecture, Japan TEL : +81-95-861-7514 FAX : +81-95-861-1315 Mail: [email protected]
Main Office Postal Code No. 850-0063 Ryoko Building, The 2nd Annex 8-12, Akunoura-machi, Nagasaki City, Nagasaki Prefecture, Japan TEL: +81-95-861-1638 FAX: +81-95-861-5738 Mail : [email protected]
Kitakyushu Branch Office Postal Code No. 803-0818 NS Building, 4th Floor 6-1, Kata-machi 1-chome, Kokura North Ward, Kitakyushu City, Fukuoka Prefecture, Japan TEL.: +81-93-967-8220 Mail: [email protected]
Takasago Business Office Postal Code No. 676-0008 The 3rd Takasago Ryoko Building, 3rd Floor 8-30, Niihama 2-chome, Arai-cho, Takasago City, Hyogo Prefecture, Japan TEL.: +81-79-443-2423 FAX.: +81-79-443-3895 Mail : [email protected]
Kanagawa Business Office Postal Code No. 221-0835 Kubota Building 8th Floor 31-5, Tsuruya-cho 3-chome, Kanagawa Ward, Yokohama City, Kanagawa Prefecture, Japan TEL: +81-45-290-6131 FAX: +81-45-321-3898 Mail: [email protected]