system error - bd · the pc unit should beep, no errors should occur, and if a module is connected,...
TRANSCRIPT
System ErrorBD Alaris™ PC Unit
What does SYSTEM ERROR mean?The BD Alaris™ PC unit (PCU) software runs self-checking programs prior to and during operation. A SYSTEM ERROR message means that the BD Alaris™ System has identified an error in either the hardware or the software of the PCU. Operation will continue on all channels; current infusions are not affected but the module cannot accept any new changes to the rate, dose or Volume to be Infused (VTBI).
What should I do?Obtain a new PCU. Do not power down until a new PCU is available. Operation will continue on all channels during this time. Programmed settings on the module are not restorable, any current rate, dose and VTBI settings should be noted and recorded prior to powering down the PCU. Tag the affected PCU, describe the error and return it to your facility’s clinical engineering or biomed department.
A. The system will display a SYSTEM ERROR message on themain display and provide the user with instructions.
B. Audible alarm tones and a visual red indicator light will notifythe user that the system is in an alarm state.
C. Green infusing indicators will continue to illuminate.Infusions will continue as programmed. Drug name and dosewill scroll on the module’s display(s).
D. The SYSTEM OFF soft key will appear at the bottom right ofthe display.
In certain system errors, this soft key will not be available.In those cases, power down by pressing the SYSTEM ON key.
For product support, contact Customer Advocacy at 888.812.3266 or [email protected]
For technical support, contact Instrument Technical Support at 866.488.1408.
For product orders, contact Customer Order Management at 800.482.4822.
See reverse side for applicable warnings and cautions.
For complete instructions, refer to the BD Alaris™ System User Manual at bd.com
AB
D
C
Warnings and cautionsWARNING: The Alaris System performs a self check during power up. The PC unit should beep, no errors should occur, and if a module is connected, all LED segments should flash. If the Alaris System fails the self check, remove the failing PC unit or module from use.
System Error
BD, San Diego, CA, 92130, U.S.
bd.comBD, the BD Logo and Alaris are trademarks of Becton, Dickinson and Company or its affiliates. © 2019 BD. All rights reserved. MC190002479 (0819/1000) BD-10430