systems & hire & sales equipment systems · the props are suitable for most re-shoring and...
TRANSCRIPT
CASSAFORM
PROPPING
www.cassaform.com.au
t 1300 745 674
SYSTEMS & EQUIPMENT
SYSTEMS & EQUIPMENT
SYSTEMS & EQUIPMENT
Hire & Sales
GCASSAFORM PROP RANGE
ACROW PROPS Page 3
Page 4
Page 5
Page 6
Page 7
PROPPING
The Acrow prop is the most common prop used in the construction industry and domestic markets today. Its massive popularity comes down to the fact that it is the simplest, quickest and most reliable and economic method of temporary support. Available in 5 different sizes it is perfectly suited for both small unique and large commercial applications.
MULTI PROPS
Similar to the Slabprop the Multi Prop is also an aluminium extendible prop which comes in four different sizes. Its aluminium design makes for a longer life cycle compared to the traditional steel tube props like the Acrow Prop. Similar to the
as basements and car park where manual installation is required.
SUPER PROPS
The Super Prop is an ideal support system for the construction industry especially when you are required to support extra heavy loads. It has similar characteristics to a No.3 Acrow prop in range but with a load capacity of up to 9 times more at full height.
SUPER 100 PROPS
Capable of supporting 100 tonnes at 5m and 48 tonnes at 12m un-braced and can go even higher with bracing, the Super100 prop is the prop to use when you need to
SLABPROPS
worker fatigue. Thanks to its safety characteristics, sturdiness and high load capacity the props are suitable for most re-shoring and formwork applications including use
head and drop head systems in the market makes it a product highly sort after prop.
PROPPING
CASSAFORM PR
Cassaform is a trusted Australian supplier of high quality propping and shoring equipment to the Building Construction & Civil Infrastructure sectors. We provide a comprehensive and innovative product range which is backed by reliable service and advice. Our experienced technical staff and in house engineering team are committed to providing a personalised and responsive service to your project.
Cassaform recognises that temporary works forms a key function in the construction process. As a result we aim to supply cost efficiency to building & construction sites by providing the market with custom designed solutions. To achieve this Cassaform has set up our own in house engineering team with industry experience that can work closely with clients and other stake holders throughout all phases of the project process. I.e. from concept and design phase right through to commissioning and handover. This enables us to support our clients to deliver the best and most cost effective engineered solution for the project. We can now support you from the early planning stage through installation and also provide you with engineering sign off for designs.
Cassaform provides an onsite assessment, engineering and delivery service with all Propping Systems.
mm t kN mm t kN mm t kN mm t kN2020 7.80 77.50 2020 7.80 77.502100 6.80 67.50 2100 7.40 73.902200 5.80 57.60 2200 7.10 70.302300 5.00 49.60 2300 6.70 66.802400 4.80 47.60 2400 6.30 63.20 2400 6.80 67.702500 4.60 45.60 2500 6.00 59.60 2500 6.60 65.702600 4.40 43.60 2600 5.60 56.00 2600 6.40 63.70
2700 5.30 52.50 2700 6.20 61.702800 5.00 49.60 2800 6.00 59.702900 4.90 48.90 2900 5.80 57.603000 4.80 48.10 3000 5.60 55.603100 4.80 47.40 3100 5.40 53.603200 4.70 46.60 3200 5.20 51.603300 4.60 45.90 3300 5.10 50.503400 4.50 45.10 3400 5.00 49.503500 4.50 44.40 3500 4.90 48.403600 4.40 43.60 3600 4.70 47.30 3600 6.80 67.70
3700 4.60 46.20 3700 6.60 65.703800 4.50 45.20 3800 6.40 63.703900 4.40 44.10 3900 6.20 61.704000 4.30 43.00 4000 6.00 59.70
4100 5.80 57.604200 5.60 55.604300 5.40 53.604400 5.20 51.604500 5.10 50.504600 5.00 49.504700 4.90 48.404800 4.70 47.304900 4.60 46.205000 4.50 45.205100 4.40 44.105200 4.30 43.00
2020 - 2650 (15.5kg) 2020 - 3620 (19.6kg) 2400 - 4000 (21.1kg) 3600 - 5200 (25.8kg)
The Slabprop is an aluminium light weight prop which is both sturdy and has exceptional safety characteristics. The high load capacity makes it’s suitable for most re-shoring and formwork applications and casting of slabs. The Slabprop comes in four different sizes and ranges in capacity from 43.0 kN to 77.5 kN depending on the extended
LOAD CHART
13mmø
150mm
150mm
134mm
134mm
SLAB PROPS
PROPPING
www.cassaform.com.auP4
PROPPING
www.cassaform.com.aP4
mm t kN mm t kN mm t kN mm t kN2020 7.80 77.50 2020 7.80 77.502100 6.80 67.50 2100 7.40 73.902200 5.80 57.60 2200 7.10 70.302300 5.00 49.60 2300 6.70 66.802400 4.80 47.60 2400 6.30 63.20 2400 6.80 67.702500 4.60 45.60 2500 6.00 59.60 2500 6.60 65.702600 4.40 43.60 2600 5.60 56.00 2600 6.40 63.70
2700 5.30 52.50 2700 6.20 61.702800 5.00 49.60 2800 6.00 59.702900 4.90 48.90 2900 5.80 57.603000 4.80 48.10 3000 5.60 55.603100 4.80 47.40 3100 5.40 53.603200 4.70 46.60 3200 5.20 51.603300 4.60 45.90 3300 5.10 50.503400 4.50 45.10 3400 5.00 49.503500 4.50 44.40 3500 4.90 48.403600 4.40 43.60 3600 4.70 47.30 3600 6.80 67.70
3700 4.60 46.20 3700 6.60 65.703800 4.50 45.20 3800 6.40 63.703900 4.40 44.10 3900 6.20 61.704000 4.30 43.00 4000 6.00 59.70
4100 5.80 57.604200 5.60 55.604300 5.40 53.604400 5.20 51.604500 5.10 50.504600 5.00 49.504700 4.90 48.404800 4.70 47.304900 4.60 46.205000 4.50 45.205100 4.40 44.105200 4.30 43.00
2020 - 2650 (15.5kg) 2020 - 3620 (19.6kg) 2400 - 4000 (21.1kg) 3600 - 5200 (25.8kg)
bprop is an aluminium light weight prop which is both sturdy and has exceptional safety characteristics. gh load capacity makes it’s suitable for most re-shoring and formwork applications and casting of slabs. The op comes in four different sizes and ranges in capacity from 43.0 kN to 77.5 kN depending on the extended
LOAD CHART
13mmø
150mm
150mm
134mm
134mm
B PROPS
PROPPING
www.cassaform.com.auP4
PROPPING
www.cassaform.com.auP4P1
ACROW PROPS - LOAD CHARTNo. 0 (13kg) No. 1 (17.3kg) No. 2 (20kg) No. 3 (22.6kg) No. 4 (30kg)
mm Tonne kN Height Tonne kN mm Tonne kN Height Tonne kN mm Tonne kN
1050 4.33 42.5
1200 4.18 41.0
1400 3.36 33.0
1600 2.54 25.0 1600 3.47 34.0
1800 2.39 23.5 1800 2.95 29.0 1900 3.97 39.0
1850 2.34 23.5 2000 2.49 24.5 2000 3.51 34.5 2170 3.61 35.5
2200 1.93 19.0 2200 2.54 25.0 2200 3.61 35.5
2400 1.73 17.0 2400 2.19 21.5 2400 3.16 31.0
2600 1.47 14.5 2600 1.78 17.5 2600 2.34 23.0
2800 1.32 13.0 2800 1.58 15.5 2800 1.93 19.0
3000 1.37 13.5 3000 1.58 15.5 3100 2.14 21.0
3200 1.22 12.0 3200 1.27 12.5 3200 1.93 19.0
3400 1.12 11.0 3400 1.17 11.5 3400 1.78 17.5
3600 1.00 10.0 3600 1.52 15.0
3800 0.91 9.0 3800 1.27 12.5
3975 0.76 7.5 4000 1.12 11.0
4200 0.96 9.5
4400 0.91 9.0
4600 0.81 8.0
4800 0.71 7.0
PROPPING
ww.cassaform.com.au P5
mm t kN mm t kN mm t kN mm t kN1450 7.50 73.31500 7.50 73.31600 7.50 73.31700 7.50 73.31800 7.30 71.71900 7.00 68.61950 6.80 67.0 1950 9.00 88.32000 6.70 65.4 2000 9.00 88.32100 6.50 63.8 2100 8.50 83.02200 6.30 62.2 2200 7.90 77.72300 6.20 61.1 2300 7.40 72.92400 6.20 60.6 2400 7.00 68.62500 6.10 60.0 2500 6.60 64.4
2600 6.30 61.9 2600 7.30 71.42700 6.00 59.3 2700 7.30 71.12800 5.90 57.5 2800 7.20 70.82900 5.70 55.7 2900 7.20 70.43000 5.50 54.3 3000 6.80 67.13100 5.40 52.9 3100 6.40 63.03200 5.20 51.4 3200 6.00 58.93300 5.10 49.8 3300 5.60 54.83400 4.70 46.4 3400 5.40 52.53500 4.40 42.9 3500 5.10 50.2
3600 4.90 47.93700 4.70 46.03800 4.50 44.23900 4.30 42.34000 4.10 40.44100 3.90 38.54200 3.70 36.64300 3.50 34.8 4300 4.50 44.64400 3.40 32.9 4400 4.50 44.64500 3.20 31.1 4500 4.50 44.64600 3.00 29.3 4600 4.50 43.84700 2.80 27.4 4700 4.40 43.04800 2.61 25.6 4800 4.30 42.1
4900 4.20 41.25000 4.10 40.35100 4.00 38.85200 3.70 36.15300 3.40 33.85400 3.30 31.95500 3.00 29.95600 2.90 28.45700 2.70 26.95800 2.60 25.55900 2.50 24.36000 2.40 23.16100 2.20 22.06200 2.10 20.96250 2.10 20.4
MP 250 (15.6kg) MP 350 (19.7kg) MP 480 (25.00kg) MP 625 (34.8kg)
Cassaform Multiprops are very similar to the Slabprops in that they too are constructed of aluminium. They are slightly heavier in physical unit weight and their respective load capacities slightly less than the Slabprop at the same height. These props are well known and accepted in the construction industry and have been used for many years on building sites in different applications. They provide a simple, quick and easy solution to temporary propping where ever it is needed.
LOAD CHART
100mm
87mm
40mmø 14mmø
150mm
150mm
MULTI PROPS
PROPPING
www.cassaform.com.au P5
t kN mm t kN mm t kN mm t kN mm t kN.33 42.5.18 41.0.36 33.0.54 25.0 1600 2.44 34.0.39 23.5 1800 2.95 29.0 1900 3.97 39.0.34 23.0 2000 2.49 24.5 2000 3.51 34.5 2170 3.61 35.5
2200 1.93 19.0 2200 2.54 25.0 2200 3.61 35.52400 1.73 17.0 2400 2.19 21.5 2400 3.16 31.02600 1.47 14.5 2600 1.78 17.5 2600 2.34 23.02800 1.32 13.0 2800 1.58 15.5 2800 1.93 19.0
3000 1.37 13.5 3000 1.58 15.5 3100 3.14 21.03200 1.22 12.0 3200 1.27 12.5 3200 1.93 19.03400 1.12 11.0 3400 1.17 11.5 3400 1.78 17.5
3600 1.00 10.0 3600 1.52 15.03800 0.91 9.0 3800 1.27 12.53975 0.76 7.5 4000 1.12 11.0
4200 0.96 9.54400 0.91 9.04600 0.81 8.04800 0.71 7.04900 0.61 6.0
0 (13kg) No 1 (17.3kg) No 2 (20kg) No 3 (22.6kg) No 4 (30kg)
PROPPING
ww.cassaform.com.au P3
The Acrow Prop is universally renowned for being the quickest and easiest form of temporary support in the construction industry and as a result of this they are seen on nearly every building site in Australia. Whilst commonly used to support and or back prop reinforced concrete slabs and beams the versatility of the Acrow Prop is also widely used in the residential/ domestic market.
ACROW PROPS
LOAD CHART
11mmø 17mmø
150mm
150mm
mm t kN mm t kN mm t kN mm t kN mm t kN1050 4.33 42.51200 4.18 41.01400 3.36 33.01600 2.54 25.0 1600 3.47 34.01800 2.39 23.5 1800 2.95 29.0 1900 3.97 39.01850 2.34 23.0 2000 2.49 24.5 2000 3.51 34.5 2170 3.61 35.5
2200 1.93 19.0 2200 2.54 25.0 2200 3.61 35.52400 1.73 17.0 2400 2.19 21.5 2400 3.16 31.02600 1.47 14.5 2600 1.78 17.5 2600 2.34 23.02800 1.32 13.0 2800 1.58 15.5 2800 1.93 19.0
3000 1.37 13.5 3000 1.58 15.5 3100 2.14 21.03200 1.22 12.0 3200 1.27 12.5 3200 1.93 19.03400 1.12 11.0 3400 1.17 11.5 3400 1.78 17.5
3600 1.00 10.0 3600 1.52 15.03800 0.91 9.0 3800 1.27 12.53975 0.76 7.5 4000 1.12 11.0
4200 0.96 9.54400 0.91 9.04600 0.81 8.04800 0.71 7.04900 0.61 6.0
No 0 (13kg) No 1 (17.3kg) No 2 (20kg) No 3 (22.6kg) No 4 (30kg)
PROPPING
www.cassaform.com.au P3
t kN mm t kN mm t kN mm t kN mm t kN4.33 42.54.18 41.03.36 33.02.54 25.0 1600 2.44 34.02.39 23.5 1800 2.95 29.0 1900 3.97 39.02.34 23.0 2000 2.49 24.5 2000 3.51 34.5 2170 3.61 35.5
2200 1.93 19.0 2200 2.54 25.0 2200 3.61 35.52400 1.73 17.0 2400 2.19 21.5 2400 3.16 31.02600 1.47 14.5 2600 1.78 17.5 2600 2.34 23.02800 1.32 13.0 2800 1.58 15.5 2800 1.93 19.0
3000 1.37 13.5 3000 1.58 15.5 3100 3.14 21.03200 1.22 12.0 3200 1.27 12.5 3200 1.93 19.03400 1.12 11.0 3400 1.17 11.5 3400 1.78 17.5
3600 1.00 10.0 3600 1.52 15.03800 0.91 9.0 3800 1.27 12.53975 0.76 7.5 4000 1.12 11.0
4200 0.96 9.54400 0.91 9.04600 0.81 8.04800 0.71 7.04900 0.61 6.0
o 0 (13kg) No 1 (17.3kg) No 2 (20kg) No 3 (22.6kg) No 4 (30kg)
PROPPING
www.cassaform.com.au P3
The Acrow Prop is universally renowned for being the quickest and easiest form of temporary support in the construction industry and as a result of this they are seen on nearly every building site in Australia. Whilst commonly used to support and or back prop reinforced concrete slabs and beams the versatility of the Acrow Prop is also widely used in the residential/ domestic market.
ACROW PROPS
LOAD CHART
11mmø 17mmø
150mm
150mm
mm t kN mm t kN mm t kN mm t kN mm t kN1050 4.33 42.51200 4.18 41.01400 3.36 33.01600 2.54 25.0 1600 3.47 34.01800 2.39 23.5 1800 2.95 29.0 1900 3.97 39.01850 2.34 23.0 2000 2.49 24.5 2000 3.51 34.5 2170 3.61 35.5
2200 1.93 19.0 2200 2.54 25.0 2200 3.61 35.52400 1.73 17.0 2400 2.19 21.5 2400 3.16 31.02600 1.47 14.5 2600 1.78 17.5 2600 2.34 23.02800 1.32 13.0 2800 1.58 15.5 2800 1.93 19.0
3000 1.37 13.5 3000 1.58 15.5 3100 2.14 21.03200 1.22 12.0 3200 1.27 12.5 3200 1.93 19.03400 1.12 11.0 3400 1.17 11.5 3400 1.78 17.5
3600 1.00 10.0 3600 1.52 15.03800 0.91 9.0 3800 1.27 12.53975 0.76 7.5 4000 1.12 11.0
4200 0.96 9.54400 0.91 9.04600 0.81 8.04800 0.71 7.04900 0.61 6.0
No 0 (13kg) No 1 (17.3kg) No 2 (20kg) No 3 (22.6kg) No 4 (30kg)
PROPPING
www.cassaform.com.au P3
mm t kN mm t kN mm t kN2020 7.80 77.50 2020 7.80 77.502100 6.80 67.50 2100 7.40 73.902200 5.80 57.60 2200 7.10 70.302300 5.00 49.60 2300 6.70 66.802400 4.80 47.60 2400 6.30 63.20 2400 6.80 67.702500 4.60 45.60 2500 6.00 59.60 2500 6.60 65.702600 4.40 43.60 2600 5.60 56.00 2600 6.40 63.70
2700 5.30 52.50 2700 6.20 61.702800 5.00 49.60 2800 6.00 59.702900 4.90 48.90 2900 5.80 57.603000 4.80 48.10 3000 5.60 55.603100 4.80 47.40 3100 5.40 53.603200 4.70 46.60 3200 5.20 51.603300 4.60 45.90 3300 5.10 50.503400 4.50 45.10 3400 5.00 49.503500 4.50 44.40 3500 4.90 48.403600 4.40 43.60 3600 4.70 47.30
3700 4.60 46.203800 4.50 45.203900 4.40 44.104000 4.30 43.00
2020 - 2650 (15.5kg) 2020 - 3620 (19.6kg) 2400 - 4000 (21.1kg)
The Slabprop is an aluminium light weight prop which is both sturdy and has exceptionalThe high load capacity makes it’s suitable for most re-shoring and formwork applicationsSlabprop comes in four different sizes and ranges in capacity from 43.0 kN to 77.5 kN de
LOAD CHART
13mmø
150mm
150mm
134mm
134mm
SLAB PROPS
PROPPING
www.cassafoP4
PROPPIN
www.caP4P2
t kN mm t kN mm t kN mm t kN mm t kN.33 42.5.18 41.0.36 33.0.54 25.0 1600 2.44 34.0.39 23.5 1800 2.95 29.0 1900 3.97 39.0.34 23.0 2000 2.49 24.5 2000 3.51 34.5 2170 3.61 35.5
2200 1.93 19.0 2200 2.54 25.0 2200 3.61 35.52400 1.73 17.0 2400 2.19 21.5 2400 3.16 31.02600 1.47 14.5 2600 1.78 17.5 2600 2.34 23.02800 1.32 13.0 2800 1.58 15.5 2800 1.93 19.0
3000 1.37 13.5 3000 1.58 15.5 3100 3.14 21.03200 1.22 12.0 3200 1.27 12.5 3200 1.93 19.03400 1.12 11.0 3400 1.17 11.5 3400 1.78 17.5
3600 1.00 10.0 3600 1.52 15.03800 0.91 9.0 3800 1.27 12.53975 0.76 7.5 4000 1.12 11.0
4200 0.96 9.54400 0.91 9.04600 0.81 8.04800 0.71 7.04900 0.61 6.0
0 (13kg) No 1 (17.3kg) No 2 (20kg) No 3 (22.6kg) No 4 (30kg)
PROPPING
ww.cassaform.com.au P3
The Acrow Prop is universally renowned for being the quickest and easiest form of temporary support in the construction industry and as a result of this they are seen on nearly every building site in Australia. Whilst commonly used to support and or back prop reinforced concrete slabs and beams the versatility of the Acrow Prop is also widely used in the residential/ domestic market.
ACROW PROPS
LOAD CHART
11mmø 17mmø
150mm
150mm
mm t kN mm t kN mm t kN mm t kN mm t kN1050 4.33 42.51200 4.18 41.01400 3.36 33.01600 2.54 25.0 1600 3.47 34.01800 2.39 23.5 1800 2.95 29.0 1900 3.97 39.01850 2.34 23.0 2000 2.49 24.5 2000 3.51 34.5 2170 3.61 35.5
2200 1.93 19.0 2200 2.54 25.0 2200 3.61 35.52400 1.73 17.0 2400 2.19 21.5 2400 3.16 31.02600 1.47 14.5 2600 1.78 17.5 2600 2.34 23.02800 1.32 13.0 2800 1.58 15.5 2800 1.93 19.0
3000 1.37 13.5 3000 1.58 15.5 3100 2.14 21.03200 1.22 12.0 3200 1.27 12.5 3200 1.93 19.03400 1.12 11.0 3400 1.17 11.5 3400 1.78 17.5
3600 1.00 10.0 3600 1.52 15.03800 0.91 9.0 3800 1.27 12.53975 0.76 7.5 4000 1.12 11.0
4200 0.96 9.54400 0.91 9.04600 0.81 8.04800 0.71 7.04900 0.61 6.0
No 0 (13kg) No 1 (17.3kg) No 2 (20kg) No 3 (22.6kg) No 4 (30kg)
PROPPING
www.cassaform.com.au P3
t kN mm t kN mm t kN mm t kN mm t kN.33 42.5.18 41.0.36 33.0.54 25.0 1600 2.44 34.0.39 23.5 1800 2.95 29.0 1900 3.97 39.0.34 23.0 2000 2.49 24.5 2000 3.51 34.5 2170 3.61 35.5
2200 1.93 19.0 2200 2.54 25.0 2200 3.61 35.52400 1.73 17.0 2400 2.19 21.5 2400 3.16 31.02600 1.47 14.5 2600 1.78 17.5 2600 2.34 23.02800 1.32 13.0 2800 1.58 15.5 2800 1.93 19.0
3000 1.37 13.5 3000 1.58 15.5 3100 3.14 21.03200 1.22 12.0 3200 1.27 12.5 3200 1.93 19.03400 1.12 11.0 3400 1.17 11.5 3400 1.78 17.5
3600 1.00 10.0 3600 1.52 15.03800 0.91 9.0 3800 1.27 12.53975 0.76 7.5 4000 1.12 11.0
4200 0.96 9.54400 0.91 9.04600 0.81 8.04800 0.71 7.04900 0.61 6.0
0 (13kg) No 1 (17.3kg) No 2 (20kg) No 3 (22.6kg) No 4 (30kg)
PROPPING
ww.cassaform.com.au P3
The Acrow Prop is universally renowned for being the quickest and easiest form of temporary support in the construction industry and as a result of this they are seen on nearly every building site in Australia. Whilst commonly used to support and or back prop reinforced concrete slabs and beams the versatility of the Acrow Prop is also widely used in the residential/ domestic market.
ACROW PROPS
LOAD CHART
11mmø 17mmø
150mm
150mm
mm t kN mm t kN mm t kN mm t kN mm t kN1050 4.33 42.51200 4.18 41.01400 3.36 33.01600 2.54 25.0 1600 3.47 34.01800 2.39 23.5 1800 2.95 29.0 1900 3.97 39.01850 2.34 23.0 2000 2.49 24.5 2000 3.51 34.5 2170 3.61 35.5
2200 1.93 19.0 2200 2.54 25.0 2200 3.61 35.52400 1.73 17.0 2400 2.19 21.5 2400 3.16 31.02600 1.47 14.5 2600 1.78 17.5 2600 2.34 23.02800 1.32 13.0 2800 1.58 15.5 2800 1.93 19.0
3000 1.37 13.5 3000 1.58 15.5 3100 2.14 21.03200 1.22 12.0 3200 1.27 12.5 3200 1.93 19.03400 1.12 11.0 3400 1.17 11.5 3400 1.78 17.5
3600 1.00 10.0 3600 1.52 15.03800 0.91 9.0 3800 1.27 12.53975 0.76 7.5 4000 1.12 11.0
4200 0.96 9.54400 0.91 9.04600 0.81 8.04800 0.71 7.04900 0.61 6.0
No 0 (13kg) No 1 (17.3kg) No 2 (20kg) No 3 (22.6kg) No 4 (30kg)
PROPPING
www.cassaform.com.au P3
PROPPING
ww.cassaform.com.au P5
mm t kN mm t kN mm t kN mm t kN1450 7.50 73.31500 7.50 73.31600 7.50 73.31700 7.50 73.31800 7.30 71.71900 7.00 68.61950 6.80 67.0 1950 9.00 88.32000 6.70 65.4 2000 9.00 88.32100 6.50 63.8 2100 8.50 83.02200 6.30 62.2 2200 7.90 77.72300 6.20 61.1 2300 7.40 72.92400 6.20 60.6 2400 7.00 68.62500 6.10 60.0 2500 6.60 64.4
2600 6.30 61.9 2600 7.30 71.42700 6.00 59.3 2700 7.30 71.12800 5.90 57.5 2800 7.20 70.82900 5.70 55.7 2900 7.20 70.43000 5.50 54.3 3000 6.80 67.13100 5.40 52.9 3100 6.40 63.03200 5.20 51.4 3200 6.00 58.93300 5.10 49.8 3300 5.60 54.83400 4.70 46.4 3400 5.40 52.53500 4.40 42.9 3500 5.10 50.2
3600 4.90 47.93700 4.70 46.03800 4.50 44.23900 4.30 42.34000 4.10 40.44100 3.90 38.54200 3.70 36.64300 3.50 34.8 4300 4.50 44.64400 3.40 32.9 4400 4.50 44.64500 3.20 31.1 4500 4.50 44.64600 3.00 29.3 4600 4.50 43.84700 2.80 27.4 4700 4.40 43.04800 2.61 25.6 4800 4.30 42.1
4900 4.20 41.25000 4.10 40.35100 4.00 38.85200 3.70 36.15300 3.40 33.85400 3.30 31.95500 3.00 29.95600 2.90 28.45700 2.70 26.95800 2.60 25.55900 2.50 24.36000 2.40 23.16100 2.20 22.06200 2.10 20.96250 2.10 20.4
MP 250 (15.6kg) MP 350 (19.7kg) MP 480 (25.00kg) MP 625 (34.8kg)
Cassaform Multiprops are very similar to the Slabprops in that they too are constructed of aluminium. They are slightly heavier in physical unit weight and their respective load capacities slightly less than the Slabprop at the same height. These props are well known and accepted in the construction industry and have been used for many years on building sites in different applications. They provide a simple, quick and easy solution to temporary propping where ever it is needed.
LOAD CHART
100mm
87mm
40mmø 14mmø
150mm
150mm
MULTI PROPS
PROPPING
www.cassaform.com.au P5
mm t kN mm t kN mm t kN mm t kN2020 7.80 77.50 2020 7.80 77.502100 6.80 67.50 2100 7.40 73.902200 5.80 57.60 2200 7.10 70.302300 5.00 49.60 2300 6.70 66.802400 4.80 47.60 2400 6.30 63.20 2400 6.80 67.702500 4.60 45.60 2500 6.00 59.60 2500 6.60 65.702600 4.40 43.60 2600 5.60 56.00 2600 6.40 63.70
2700 5.30 52.50 2700 6.20 61.702800 5.00 49.60 2800 6.00 59.702900 4.90 48.90 2900 5.80 57.603000 4.80 48.10 3000 5.60 55.603100 4.80 47.40 3100 5.40 53.603200 4.70 46.60 3200 5.20 51.603300 4.60 45.90 3300 5.10 50.503400 4.50 45.10 3400 5.00 49.503500 4.50 44.40 3500 4.90 48.403600 4.40 43.60 3600 4.70 47.30 3600 6.80 67.70
3700 4.60 46.20 3700 6.60 65.703800 4.50 45.20 3800 6.40 63.703900 4.40 44.10 3900 6.20 61.704000 4.30 43.00 4000 6.00 59.70
4100 5.80 57.604200 5.60 55.604300 5.40 53.604400 5.20 51.604500 5.10 50.504600 5.00 49.504700 4.90 48.404800 4.70 47.304900 4.60 46.205000 4.50 45.205100 4.40 44.105200 4.30 43.00
2020 - 2650 (15.5kg) 2020 - 3620 (19.6kg) 2400 - 4000 (21.1kg) 3600 - 5200 (25.8kg)
The Slabprop is an aluminium light weight prop which is both sturdy and has exceptional safety characteristics. The high load capacity makes it’s suitable for most re-shoring and formwork applications and casting of slabs. The Slabprop comes in four different sizes and ranges in capacity from 43.0 kN to 77.5 kN depending on the extended
LOAD CHART
13mmø
150mm
150mm
134mm
134mm
SLAB PROPS
PROPPING
www.cassaform.com.auP4
PROPPING
www.cassaform.com.aP4
mm t kN mm t kN mm t kN mm t kN2020 7.80 77.50 2020 7.80 77.502100 6.80 67.50 2100 7.40 73.902200 5.80 57.60 2200 7.10 70.302300 5.00 49.60 2300 6.70 66.802400 4.80 47.60 2400 6.30 63.20 2400 6.80 67.702500 4.60 45.60 2500 6.00 59.60 2500 6.60 65.702600 4.40 43.60 2600 5.60 56.00 2600 6.40 63.70
2700 5.30 52.50 2700 6.20 61.702800 5.00 49.60 2800 6.00 59.702900 4.90 48.90 2900 5.80 57.603000 4.80 48.10 3000 5.60 55.603100 4.80 47.40 3100 5.40 53.603200 4.70 46.60 3200 5.20 51.603300 4.60 45.90 3300 5.10 50.503400 4.50 45.10 3400 5.00 49.503500 4.50 44.40 3500 4.90 48.403600 4.40 43.60 3600 4.70 47.30 3600 6.80 67.70
3700 4.60 46.20 3700 6.60 65.703800 4.50 45.20 3800 6.40 63.703900 4.40 44.10 3900 6.20 61.704000 4.30 43.00 4000 6.00 59.70
4100 5.80 57.604200 5.60 55.604300 5.40 53.604400 5.20 51.604500 5.10 50.504600 5.00 49.504700 4.90 48.404800 4.70 47.304900 4.60 46.205000 4.50 45.205100 4.40 44.105200 4.30 43.00
2020 - 2650 (15.5kg) 2020 - 3620 (19.6kg) 2400 - 4000 (21.1kg) 3600 - 5200 (25.8kg)
The Slabprop is an aluminium light weight prop which is both sturdy and has exceptional safety characteristics. The high load capacity makes it’s suitable for most re-shoring and formwork applications and casting of slabs. The Slabprop comes in four different sizes and ranges in capacity from 43.0 kN to 77.5 kN depending on the extended
LOAD CHART
13mmø
150mm
150mm
134mm
134mm
SLAB PROPS
PROPPING
www.cassaform.com.auP4
PROPPING
www.cassaform.com.aP4
EURO PROPSThe Cassaform Euro Prop range are sure to satisfy every need in the construction industry.
Manufactured from galvanised steel, these props have a higher load capacity than the typical Acrow Prop traditionally used in the construction industry.
The built in safety features included; hand shearing protection, and pipe slipping prevention. They are easy to use and have millimetre height adjustment.
EURO PROP - LOAD CHART
Height Class B Class D Class E20.0 kg 19.8 kg 30.0 kg
mm Tonne kN Tonne kN Tonne kN
2000 4.14 40.6
2100 3.26 32.0 3.26 32.0 4.14 40.6
2200 3.05 30.0 3.26 32.0 4.14 40.6
2300 2.85 28.0 3.26 32.0 4.14 40.6
2400 2.65 26.0 3.26 32.0 4.14 40.6
2500 2.52 24.8 3.26 32.0 4.14 40.6
2600 2.40 23.6 3.26 32.0 4.14 40.6
2700 2.28 22.4 3.26 32.0 4.14 40.6
2800 2.15 21.1 3.26 32.0 4.14 40.6
2900 2.02 19.9 3.16 31.0 4.14 40.6
3000 1.90 18.7 3.05 30.0 4.14 40.6
3100 1.78 17.5 3.01 29.6 4.14 40.6
3200 1.66 16.3 2.91 28.6 3.95 38.8
3300 1.43 14.1 2.81 27.6 3.72 36.5
3400 1.41 13.9 2.70 26.5 3.46 34.0
3500 1.29 12.7 2.54 25.0 3.24 31.8
Load Capacities specified to UNI EN 1065-1999
mm t kN mm t kN mm t kN mm t kN2020 7.80 77.50 2020 7.80 77.502100 6.80 67.50 2100 7.40 73.902200 5.80 57.60 2200 7.10 70.302300 5.00 49.60 2300 6.70 66.802400 4.80 47.60 2400 6.30 63.20 2400 6.80 67.702500 4.60 45.60 2500 6.00 59.60 2500 6.60 65.702600 4.40 43.60 2600 5.60 56.00 2600 6.40 63.70
2700 5.30 52.50 2700 6.20 61.702800 5.00 49.60 2800 6.00 59.702900 4.90 48.90 2900 5.80 57.603000 4.80 48.10 3000 5.60 55.603100 4.80 47.40 3100 5.40 53.603200 4.70 46.60 3200 5.20 51.603300 4.60 45.90 3300 5.10 50.503400 4.50 45.10 3400 5.00 49.503500 4.50 44.40 3500 4.90 48.403600 4.40 43.60 3600 4.70 47.30 3600 6.80 67.70
3700 4.60 46.20 3700 6.60 65.703800 4.50 45.20 3800 6.40 63.703900 4.40 44.10 3900 6.20 61.704000 4.30 43.00 4000 6.00 59.70
4100 5.80 57.604200 5.60 55.604300 5.40 53.604400 5.20 51.604500 5.10 50.504600 5.00 49.504700 4.90 48.404800 4.70 47.304900 4.60 46.205000 4.50 45.205100 4.40 44.105200 4.30 43.00
2020 - 2650 (15.5kg) 2020 - 3620 (19.6kg) 2400 - 4000 (21.1kg) 3600 - 5200 (25.8kg)
bprop is an aluminium light weight prop which is both sturdy and has exceptional safety characteristics. gh load capacity makes it’s suitable for most re-shoring and formwork applications and casting of slabs. The op comes in four different sizes and ranges in capacity from 43.0 kN to 77.5 kN depending on the extended
LOAD CHART
13mmø
150mm
150mm
134mm
134mm
B PROPS
PROPPING
www.cassaform.com.auP4
PROPPING
www.cassaform.com.auP4P3
SLAB PROP V1.0 - LOAD CHART (EN 1065)SP 1.0 - 300 (16.65kg) SP 1.0 - 400 (21.10kg) SP 1.0 – 520 (25.80kg)
Height kN Tonne Height kN Tonne Height kN Tonne
1750 116.2 11.81800 114.2 11.61900 110.2 11.22000 106.2 10.82100 102.3 10.42200 98.3 10.02300 94.3 9.62400 90.4 9.2 2400 67.7 6.92500 85.1 8.6 2500 65.7 6.72600 79.8 8.1 2600 63.7 6.52700 74.5 7.5 2700 61.7 6.22800 69.3 7.0 2800 59.7 6.02900 64.0 6.5 2900 57.6 5.83000 58.7 5.9 3000 55.6 5.6
3100 53.6 5.43200 51.6 5.23300 50.5 5.13400 49.5 5.03500 48.4 4.93600 47.3 4.8 3600 67.7 6.93700 46.2 4.7 3700 65.7 6.73800 45.2 4.6 3800 63.7 6.53900 44.1 4.5 3900 61.7 6.24000 43.0 4.3 4000 59.7 6.0
4100 57.6 5.84200 55.6 5.64300 53.6 5.44400 51.6 5.24500 50.5 5.14600 49.5 5.04700 48.4 4.94800 47.3 4.84900 46.2 4.75000 45.2 4.65100 44.1 4.55200 43.0 4.3
SLAB PROP V2.0 - LOAD CHART (ES 16031)SP 2.0 – 400 (23.27kg) SP 2.0 – 520 (28.32kg) SP 2.0 – 625 (32.96kg)
Height kN Tonne Height kN Tonne Height kN Tonne
2400 80.0 8.12500 79.3 8.02600 78.7 8.02700 78.1 7.92800 77.5 7.92900 76.8 7.83000 76.2 7.73100 75.6 7.73200 75.0 7.63300 70.9 7.23400 66.8 6.83500 62.7 6.33600 58.7 5.9 3600 76.0 7.73700 54.6 5.5 3700 72.6 7.43800 50.5 5.1 3800 69.2 7.03900 46.7 4.7 3900 65.8 6.74000 42.4 4.3 4000 62.5 6.3
4100 59.1 6.04200 55.7 5.64300 52.3 5.34400 49.0 5.04500 46.5 4.74600 44.1 4.54700 41.6 4.24800 39.2 4.04900 36.8 3.7 4900 40.4 4.15000 34.3 3.5 5000 38.9 3.95100 31.9 3.2 5100 37.5 3.85200 29.5 3.0 5200 36.1 3.6
5300 34.6 3.55400 33.2 3.35500 31.8 3.25600 30.6 3.15700 29.4 3.05800 28.3 2.85900 27.1 2.76000 26.0 2.66100 24.8 2.56200 23.6 2.46250 23.1 2.3
PROPPING
ww.cassaform.com.au P5
mm t kN mm t kN mm t kN mm t kN1450 7.50 73.31500 7.50 73.31600 7.50 73.31700 7.50 73.31800 7.30 71.71900 7.00 68.61950 6.80 67.0 1950 9.00 88.32000 6.70 65.4 2000 9.00 88.32100 6.50 63.8 2100 8.50 83.02200 6.30 62.2 2200 7.90 77.72300 6.20 61.1 2300 7.40 72.92400 6.20 60.6 2400 7.00 68.62500 6.10 60.0 2500 6.60 64.4
2600 6.30 61.9 2600 7.30 71.42700 6.00 59.3 2700 7.30 71.12800 5.90 57.5 2800 7.20 70.82900 5.70 55.7 2900 7.20 70.43000 5.50 54.3 3000 6.80 67.13100 5.40 52.9 3100 6.40 63.03200 5.20 51.4 3200 6.00 58.93300 5.10 49.8 3300 5.60 54.83400 4.70 46.4 3400 5.40 52.53500 4.40 42.9 3500 5.10 50.2
3600 4.90 47.93700 4.70 46.03800 4.50 44.23900 4.30 42.34000 4.10 40.44100 3.90 38.54200 3.70 36.64300 3.50 34.8 4300 4.50 44.64400 3.40 32.9 4400 4.50 44.64500 3.20 31.1 4500 4.50 44.64600 3.00 29.3 4600 4.50 43.84700 2.80 27.4 4700 4.40 43.04800 2.61 25.6 4800 4.30 42.1
4900 4.20 41.25000 4.10 40.35100 4.00 38.85200 3.70 36.15300 3.40 33.85400 3.30 31.95500 3.00 29.95600 2.90 28.45700 2.70 26.95800 2.60 25.55900 2.50 24.36000 2.40 23.16100 2.20 22.06200 2.10 20.96250 2.10 20.4
MP 250 (15.6kg) MP 350 (19.7kg) MP 480 (25.00kg) MP 625 (34.8kg)
Cassaform Multiprops are very similar to the Slabprops in that they too are constructed of aluminium. They are slightly heavier in physical unit weight and their respective load capacities slightly less than the Slabprop at the same height. These props are well known and accepted in the construction industry and have been used for many years on building sites in different applications. They provide a simple, quick and easy solution to temporary propping where ever it is needed.
LOAD CHART
100mm
87mm
40mmø 14mmø
150mm
150mm
MULTI PROPS
PROPPING
www.cassaform.com.au P5
PROPPING
ww.cassaform.com.au P5
mm t kN mm t kN mm t kN mm t kN1450 7.50 73.31500 7.50 73.31600 7.50 73.31700 7.50 73.31800 7.30 71.71900 7.00 68.61950 6.80 67.0 1950 9.00 88.32000 6.70 65.4 2000 9.00 88.32100 6.50 63.8 2100 8.50 83.02200 6.30 62.2 2200 7.90 77.72300 6.20 61.1 2300 7.40 72.92400 6.20 60.6 2400 7.00 68.62500 6.10 60.0 2500 6.60 64.4
2600 6.30 61.9 2600 7.30 71.42700 6.00 59.3 2700 7.30 71.12800 5.90 57.5 2800 7.20 70.82900 5.70 55.7 2900 7.20 70.43000 5.50 54.3 3000 6.80 67.13100 5.40 52.9 3100 6.40 63.03200 5.20 51.4 3200 6.00 58.93300 5.10 49.8 3300 5.60 54.83400 4.70 46.4 3400 5.40 52.53500 4.40 42.9 3500 5.10 50.2
3600 4.90 47.93700 4.70 46.03800 4.50 44.23900 4.30 42.34000 4.10 40.44100 3.90 38.54200 3.70 36.64300 3.50 34.8 4300 4.50 44.64400 3.40 32.9 4400 4.50 44.64500 3.20 31.1 4500 4.50 44.64600 3.00 29.3 4600 4.50 43.84700 2.80 27.4 4700 4.40 43.04800 2.61 25.6 4800 4.30 42.1
4900 4.20 41.25000 4.10 40.35100 4.00 38.85200 3.70 36.15300 3.40 33.85400 3.30 31.95500 3.00 29.95600 2.90 28.45700 2.70 26.95800 2.60 25.55900 2.50 24.36000 2.40 23.16100 2.20 22.06200 2.10 20.96250 2.10 20.4
MP 250 (15.6kg) MP 350 (19.7kg) MP 480 (25.00kg) MP 625 (34.8kg)
Cassaform Multiprops are very similar to the Slabprops in that they too are constructed of aluminium. They are slightly heavier in physical unit weight and their respective load capacities slightly less than the Slabprop at the same height. These props are well known and accepted in the construction industry and have been used for many years on building sites in different applications. They provide a simple, quick and easy solution to temporary propping where ever it is needed.
LOAD CHART
100mm
87mm
40mmø 14mmø
150mm
150mm
MULTI PROPS
PROPPING
www.cassaform.com.au P5
SLAB PROPSThe Slabprop is an aluminium light weight prop which is both sturdy and has exceptional safety characteristics. Its high load capacity makes it’s suitable for most reshoring and formwork applications and casting of slabs. The Slab Prop comes in four different sizes and ranges in capacity depending on the extended height.
The best prop for each application is chosen based on the load, heights and specific applications.
Within this range of props we stock two different versions of props and are fully interchangeable. The variance in capacities is due to the different section profile used. Version 1.0 has a more rounded profile whereas Version 2.0 has a more square profile.
NOTES:1. Loads at the highest, mid-point and lowest height have been determined by testing in accordance with
Australian Standards AS3610-1995 “Formwork for Concrete” and all other permissible loads indicated between the tests loads have been interpolated linearly.
2. The table above has allowed for a maximum “out of plumbness” of H/200 in accordance with AS3610
3. All imposed loads onto the props are assumed to be concentrically applied to the centre of the prop. Eccentrically loaded props will require down grading of the specified permissible load above.
4. The loads above assume that the props are configured with the outer tube at the base of the prop.
mm t kN mm t kN mm t kN mm t kN2020 7.80 77.50 2020 7.80 77.502100 6.80 67.50 2100 7.40 73.902200 5.80 57.60 2200 7.10 70.302300 5.00 49.60 2300 6.70 66.802400 4.80 47.60 2400 6.30 63.20 2400 6.80 67.702500 4.60 45.60 2500 6.00 59.60 2500 6.60 65.702600 4.40 43.60 2600 5.60 56.00 2600 6.40 63.70
2700 5.30 52.50 2700 6.20 61.702800 5.00 49.60 2800 6.00 59.702900 4.90 48.90 2900 5.80 57.603000 4.80 48.10 3000 5.60 55.603100 4.80 47.40 3100 5.40 53.603200 4.70 46.60 3200 5.20 51.603300 4.60 45.90 3300 5.10 50.503400 4.50 45.10 3400 5.00 49.503500 4.50 44.40 3500 4.90 48.403600 4.40 43.60 3600 4.70 47.30 3600 6.80 67.70
3700 4.60 46.20 3700 6.60 65.703800 4.50 45.20 3800 6.40 63.703900 4.40 44.10 3900 6.20 61.704000 4.30 43.00 4000 6.00 59.70
4100 5.80 57.604200 5.60 55.604300 5.40 53.604400 5.20 51.604500 5.10 50.504600 5.00 49.504700 4.90 48.404800 4.70 47.304900 4.60 46.205000 4.50 45.205100 4.40 44.105200 4.30 43.00
2020 - 2650 (15.5kg) 2020 - 3620 (19.6kg) 2400 - 4000 (21.1kg) 3600 - 5200 (25.8kg)
The Slabprop is an aluminium light weight prop which is both sturdy and has exceptional safety characteristics. The high load capacity makes it’s suitable for most re-shoring and formwork applications and casting of slabs. The Slabprop comes in four different sizes and ranges in capacity from 43.0 kN to 77.5 kN depending on the extended
LOAD CHART
13mmø
150mm
150mm
134mm
134mm
SLAB PROPS
PROPPING
www.cassaform.com.auP4
PROPPING
www.cassaform.com.auP4
t kN mm t kN mm t kN7.80 77.507.40 73.907.10 70.306.70 66.806.30 63.20 2400 6.80 67.706.00 59.60 2500 6.60 65.705.60 56.00 2600 6.40 63.705.30 52.50 2700 6.20 61.705.00 49.60 2800 6.00 59.704.90 48.90 2900 5.80 57.604.80 48.10 3000 5.60 55.604.80 47.40 3100 5.40 53.604.70 46.60 3200 5.20 51.604.60 45.90 3300 5.10 50.504.50 45.10 3400 5.00 49.504.50 44.40 3500 4.90 48.404.40 43.60 3600 4.70 47.30 3600 6.80 67.70
3700 4.60 46.20 3700 6.60 65.703800 4.50 45.20 3800 6.40 63.703900 4.40 44.10 3900 6.20 61.704000 4.30 43.00 4000 6.00 59.70
4100 5.80 57.604200 5.60 55.604300 5.40 53.604400 5.20 51.604500 5.10 50.504600 5.00 49.504700 4.90 48.404800 4.70 47.304900 4.60 46.205000 4.50 45.205100 4.40 44.105200 4.30 43.00
- 3620 (19.6kg) 2400 - 4000 (21.1kg) 3600 - 5200 (25.8kg)
which is both sturdy and has exceptional safety characteristics. ost re-shoring and formwork applications and casting of slabs. The
es in capacity from 43.0 kN to 77.5 kN depending on the extended
LOAD CHART
150mm 134mm
134mm
www.cassaform.com.auwww.cassaform.com.au4
mm t kN mm t kN mm t kN2020 7.80 77.50 2020 7.80 77.502100 6.80 67.50 2100 7.40 73.902200 5.80 57.60 2200 7.10 70.302300 5.00 49.60 2300 6.70 66.802400 4.80 47.60 2400 6.30 63.20 2400 6.80 67.702500 4.60 45.60 2500 6.00 59.60 2500 6.60 65.702600 4.40 43.60 2600 5.60 56.00 2600 6.40 63.70
2700 5.30 52.50 2700 6.20 61.702800 5.00 49.60 2800 6.00 59.702900 4.90 48.90 2900 5.80 57.603000 4.80 48.10 3000 5.60 55.603100 4.80 47.40 3100 5.40 53.603200 4.70 46.60 3200 5.20 51.603300 4.60 45.90 3300 5.10 50.503400 4.50 45.10 3400 5.00 49.503500 4.50 44.40 3500 4.90 48.403600 4.40 43.60 3600 4.70 47.30
3700 4.60 46.203800 4.50 45.203900 4.40 44.104000 4.30 43.00
2020 - 2650 (15.5kg) 2020 - 3620 (19.6kg) 2400 - 4000 (21.1kg)
The Slabprop is an aluminium light weight prop which is both sturdy and has exceptionalThe high load capacity makes it’s suitable for most re-shoring and formwork applicationsSlabprop comes in four different sizes and ranges in capacity from 43.0 kN to 77.5 kN de
LOAD CHART
13mmø
150mm
150mm
134mm
134mm
SLAB PROPS
PROPPING
www.cassafoP4
PROPPIN
www.caP4P4
ALSO AVAILABLE ARE • 1.0m Bolt on extension for Version
1.0 props only and• Connection frames in lengths of
1500mm to 2300mm.
APPLICATIONS & FEATURES• Height range - 1.750m to 6.250m • Can be used in a single post
shore application or bolted together in combination.
• Load bearing towers can be assembled with connection frames.
• Universal tripods are also available for vertical support of single props
• Useable with Cassaform’s Aluminium Panel Systems
• Can be installed with Outer Tube Bottom or Inner Tuber Bottom
mm t kN mm t kN mm t kN mm t kN2020 7.80 77.50 2020 7.80 77.502100 6.80 67.50 2100 7.40 73.902200 5.80 57.60 2200 7.10 70.302300 5.00 49.60 2300 6.70 66.802400 4.80 47.60 2400 6.30 63.20 2400 6.80 67.702500 4.60 45.60 2500 6.00 59.60 2500 6.60 65.702600 4.40 43.60 2600 5.60 56.00 2600 6.40 63.70
2700 5.30 52.50 2700 6.20 61.702800 5.00 49.60 2800 6.00 59.702900 4.90 48.90 2900 5.80 57.603000 4.80 48.10 3000 5.60 55.603100 4.80 47.40 3100 5.40 53.603200 4.70 46.60 3200 5.20 51.603300 4.60 45.90 3300 5.10 50.503400 4.50 45.10 3400 5.00 49.503500 4.50 44.40 3500 4.90 48.403600 4.40 43.60 3600 4.70 47.30 3600 6.80 67.70
3700 4.60 46.20 3700 6.60 65.703800 4.50 45.20 3800 6.40 63.703900 4.40 44.10 3900 6.20 61.704000 4.30 43.00 4000 6.00 59.70
4100 5.80 57.604200 5.60 55.604300 5.40 53.604400 5.20 51.604500 5.10 50.504600 5.00 49.504700 4.90 48.404800 4.70 47.304900 4.60 46.205000 4.50 45.205100 4.40 44.105200 4.30 43.00
2020 - 2650 (15.5kg) 2020 - 3620 (19.6kg) 2400 - 4000 (21.1kg) 3600 - 5200 (25.8kg)
The Slabprop is an aluminium light weight prop which is both sturdy and has exceptional safety characteristics. The high load capacity makes it’s suitable for most re-shoring and formwork applications and casting of slabs. The Slabprop comes in four different sizes and ranges in capacity from 43.0 kN to 77.5 kN depending on the extended
LOAD CHART
13mmø
150mm
150mm
134mm
134mm
SLAB PROPS
PROPPING
www.cassaform.com.auP4
PROPPING
www.cassaform.com.aP4
mm t kN mm t kN mm t kN mm t kN2020 7.80 77.50 2020 7.80 77.502100 6.80 67.50 2100 7.40 73.902200 5.80 57.60 2200 7.10 70.302300 5.00 49.60 2300 6.70 66.802400 4.80 47.60 2400 6.30 63.20 2400 6.80 67.702500 4.60 45.60 2500 6.00 59.60 2500 6.60 65.702600 4.40 43.60 2600 5.60 56.00 2600 6.40 63.70
2700 5.30 52.50 2700 6.20 61.702800 5.00 49.60 2800 6.00 59.702900 4.90 48.90 2900 5.80 57.603000 4.80 48.10 3000 5.60 55.603100 4.80 47.40 3100 5.40 53.603200 4.70 46.60 3200 5.20 51.603300 4.60 45.90 3300 5.10 50.503400 4.50 45.10 3400 5.00 49.503500 4.50 44.40 3500 4.90 48.403600 4.40 43.60 3600 4.70 47.30 3600 6.80 67.70
3700 4.60 46.20 3700 6.60 65.703800 4.50 45.20 3800 6.40 63.703900 4.40 44.10 3900 6.20 61.704000 4.30 43.00 4000 6.00 59.70
4100 5.80 57.604200 5.60 55.604300 5.40 53.604400 5.20 51.604500 5.10 50.504600 5.00 49.504700 4.90 48.404800 4.70 47.304900 4.60 46.205000 4.50 45.205100 4.40 44.105200 4.30 43.00
2020 - 2650 (15.5kg) 2020 - 3620 (19.6kg) 2400 - 4000 (21.1kg) 3600 - 5200 (25.8kg)
The Slabprop is an aluminium light weight prop which is both sturdy and has exceptional safety characteristics. The high load capacity makes it’s suitable for most re-shoring and formwork applications and casting of slabs. The Slabprop comes in four different sizes and ranges in capacity from 43.0 kN to 77.5 kN depending on the extended
LOAD CHART
13mmø
150mm
150mm
134mm
134mm
SLAB PROPS
PROPPING
www.cassaform.com.auP4
PROPPING
www.cassaform.com.aP4
ALU-UP2 The ALU-UP2 prop is a good alternative option to the traditionally used steel shoring systems used in the construction industry. They weigh less than half the steel prop but offer double the capacity. This enables less propping to be used and therefore saves labour handling expenses as well.
The telescopic ability of these props means that they can be adjusted to within millimetres of the desired height by simply rotating the ring nut. Connection braces can also be fitted to the props to provide stability.
The best prop for each application is chosen based on the load capacity, height required and the specific applications.
ALSO AVAILABLE ARE • 1.0m Bolt on extensions• Quick release connection frames in lengths of 1000mm, 1500 mm, 2300 mm and 3050mm are available.• Universal Tripods are available for vertical single prop support
APPLICATIONS & FEATURES• Slab Props can be used either in a single post shore application or bolted together in combination with other
props to reach even greater heights.• Load bearing towers with high capacity can be easily assembled flat on the ground with connection frames.• Useable with Cassaform’s Alufort Panel and Aluflex / Beam Systems
mm t kN mm t kN mm t kN mm t kN2020 7.80 77.50 2020 7.80 77.502100 6.80 67.50 2100 7.40 73.902200 5.80 57.60 2200 7.10 70.302300 5.00 49.60 2300 6.70 66.802400 4.80 47.60 2400 6.30 63.20 2400 6.80 67.702500 4.60 45.60 2500 6.00 59.60 2500 6.60 65.702600 4.40 43.60 2600 5.60 56.00 2600 6.40 63.70
2700 5.30 52.50 2700 6.20 61.702800 5.00 49.60 2800 6.00 59.702900 4.90 48.90 2900 5.80 57.603000 4.80 48.10 3000 5.60 55.603100 4.80 47.40 3100 5.40 53.603200 4.70 46.60 3200 5.20 51.603300 4.60 45.90 3300 5.10 50.503400 4.50 45.10 3400 5.00 49.503500 4.50 44.40 3500 4.90 48.403600 4.40 43.60 3600 4.70 47.30 3600 6.80 67.70
3700 4.60 46.20 3700 6.60 65.703800 4.50 45.20 3800 6.40 63.703900 4.40 44.10 3900 6.20 61.704000 4.30 43.00 4000 6.00 59.70
4100 5.80 57.604200 5.60 55.604300 5.40 53.604400 5.20 51.604500 5.10 50.504600 5.00 49.504700 4.90 48.404800 4.70 47.304900 4.60 46.205000 4.50 45.205100 4.40 44.105200 4.30 43.00
2020 - 2650 (15.5kg) 2020 - 3620 (19.6kg) 2400 - 4000 (21.1kg) 3600 - 5200 (25.8kg)
bprop is an aluminium light weight prop which is both sturdy and has exceptional safety characteristics. gh load capacity makes it’s suitable for most re-shoring and formwork applications and casting of slabs. The op comes in four different sizes and ranges in capacity from 43.0 kN to 77.5 kN depending on the extended
LOAD CHART
13mmø
150mm
150mm
134mm
134mm
B PROPS
PROPPING
www.cassaform.com.auP4
PROPPING
www.cassaform.com.auP4P5
ALU-UP2 - LOAD CHART (ES 16031)ALU-UP2 3500 (21.60kg) kN ALU-UP2 5000 (28.00kg) kN
Height Inner Tube Top Inner Tube Bottom Height Inner Tube Top Inner Tube
Bottom
1980 117.0 123.2
2000 116.9 123.0
2100 111.6 118.0
2200 106.3 113.0
2300 101.1 108.0
2400 95.8 103.0
2500 90.5 98.0
2600 85.3 93.0
2700 80.0 88.0
2800 76.0 83.4
2900 72.0 78.7
3000 68.0 74.1
3100 64.0 69.4
3200 60.0 64.8
3300 56.0 60.1
3400 52.0 55.5
3500 48.0 50.8
3800 59.9 63.0
3900 55.8 58.9
4000 51.8 54.7
4100 47.8 50.6
4200 43.7 46.4
4300 39.7 42.3
4400 38.7 41.3
4500 37.8 40.2
4600 36.8 39.2
4700 35.8 38.1
4800 34.8 37.1
4900 33.9 36.0
5000 32.9 35.0
Load Capacities to EN 10631-2012
MULTI PROPS - LOAD CHARTMP 250 (15.6kg) MP 350 (19.7kg) MP 480 (25.00kg) MP 625 (34.8kg)
mm t kN mm t kN mm t kN mm t kN
1450 7.50 73.31500 7.50 73.31600 7.50 73.31700 7.50 73.31800 7.30 71.71900 7.00 68.61950 6.80 67.0 1950 9.00 88.32000 6.70 65.4 2000 9.00 88.32100 6.50 63.8 2100 8.50 83.02200 6.30 62.2 2200 7.90 77.72300 6.20 61.1 2300 7.40 72.92400 6.20 60.6 2400 7.00 68.62500 6.10 60.0 2500 6.60 64.4
2600 6.30 61.9 2600 7.30 71.42700 6.00 59.3 2700 7.30 71.12800 5.90 57.5 2800 7.20 70.82900 5.70 55.7 2900 7.20 70.83000 5.50 54.3 3000 6.80 67.13100 5.40 52.9 3100 6.40 63.03200 5.10 49.8 3200 6.00 58.93400 4.70 46.4 3 00 . 03500 4.40 42.9 3400 5.40 52.5
3500 5.10 50.23600 4.90 47.93700 4.70 46.03800 4.50 44.23900 4.30 42.34000 4.10 40.44100 3.90 38.54200 3.70 36.64300 3.50 34.8 4300 4.50 44.64400 3.40 32.9 4400 4.50 44.64500 3.20 31.1 4500 4.50 44.64600 3.00 29.3 4600 4.50 43.84700 2.80 27.4 4700 4.40 43.04800 2.61 25.6 4800 4.30 42.1
4900 4.20 41.25000 4.10 40.35100 4.00 38.85200 3.70 36.15300 3.40 33.85400 3.30 31.95500 3.00 29.95600 2.90 28.45700 2.70 26.95800 2.60 25.55900 2.50 24.36000 2.40 23.16100 2.20 22.06200 2.10 20.96250 2.10 20.4
PROPPING
ww.cassaform.com.au P5
mm t kN mm t kN mm t kN mm t kN1450 7.50 73.31500 7.50 73.31600 7.50 73.31700 7.50 73.31800 7.30 71.71900 7.00 68.61950 6.80 67.0 1950 9.00 88.32000 6.70 65.4 2000 9.00 88.32100 6.50 63.8 2100 8.50 83.02200 6.30 62.2 2200 7.90 77.72300 6.20 61.1 2300 7.40 72.92400 6.20 60.6 2400 7.00 68.62500 6.10 60.0 2500 6.60 64.4
2600 6.30 61.9 2600 7.30 71.42700 6.00 59.3 2700 7.30 71.12800 5.90 57.5 2800 7.20 70.82900 5.70 55.7 2900 7.20 70.43000 5.50 54.3 3000 6.80 67.13100 5.40 52.9 3100 6.40 63.03200 5.20 51.4 3200 6.00 58.93300 5.10 49.8 3300 5.603400 4.70 46.4 3400 5.40 52.53500 4.40 42.9 3500 5.10 50.2
3600 4.90 47.93700 4.70 46.03800 4.50 44.23900 4.30 42.34000 4.10 40.44100 3.90 38.54200 3.70 36.64300 3.50 34.8 4300 4.50 44.64400 3.40 32.9 4400 4.50 44.64500 3.20 31.1 4500 4.50 44.64600 3.00 29.3 4600 4.50 43.84700 2.80 27.4 4700 4.40 43.04800 2.61 25.6 4800 4.30 42.1
4900 4.20 41.25000 4.10 40.35100 4.00 38.85200 3.70 36.15300 3.40 33.85400 3.30 31.95500 3.00 29.95600 2.90 28.45700 2.70 26.95800 2.60 25.55900 2.50 24.36000 2.40 23.16100 2.20 22.06200 2.10 20.96250 2.10 20.4
MP 250 (15.6kg) MP 350 (19.7kg) MP 480 (25.00kg) MP 625 (34.8kg)
Cassaform Multiprops are very similar to the Slabprops in that they too are constructed of aluminium. They are slightly heavier in physical unit weight and their respective load capacities slightly less than the Slabprop at the same height. These props are well known and accepted in the construction industry and have been used for many years on building sites in different applications. They provide a simple, quick and easy solution to temporary propping where ever it is needed.
LOAD CHART
100mm
87mm
40mmø 14mmø
150mm
150mm
MULTI PROPS
PROPPING
www.cassaform.com.au P5
PROPPING
ww.cassaform.com.au P5
mm t kN mm t kN mm t kN mm t kN1450 7.50 73.31500 7.50 73.31600 7.50 73.31700 7.50 73.31800 7.30 71.71900 7.00 68.61950 6.80 67.0 1950 9.00 88.32000 6.70 65.4 2000 9.00 88.32100 6.50 63.8 2100 8.50 83.02200 6.30 62.2 2200 7.90 77.72300 6.20 61.1 2300 7.40 72.92400 6.20 60.6 2400 7.00 68.62500 6.10 60.0 2500 6.60 64.4
2600 6.30 61.9 2600 7.30 71.42700 6.00 59.3 2700 7.30 71.12800 5.90 57.5 2800 7.20 70.82900 5.70 55.7 2900 7.20 70.43000 5.50 54.3 3000 6.80 67.13100 5.40 52.9 3100 6.40 63.03200 5.20 51.4 3200 6.00 58.93300 5.10 49.8 3300 5.603400 4.70 46.4 3400 5.40 52.53500 4.40 42.9 3500 5.10 50.2
3600 4.90 47.93700 4.70 46.03800 4.50 44.23900 4.30 42.34000 4.10 40.44100 3.90 38.54200 3.70 36.64300 3.50 34.8 4300 4.50 44.64400 3.40 32.9 4400 4.50 44.64500 3.20 31.1 4500 4.50 44.64600 3.00 29.3 4600 4.50 43.84700 2.80 27.4 4700 4.40 43.04800 2.61 25.6 4800 4.30 42.1
4900 4.20 41.25000 4.10 40.35100 4.00 38.85200 3.70 36.15300 3.40 33.85400 3.30 31.95500 3.00 29.95600 2.90 28.45700 2.70 26.95800 2.60 25.55900 2.50 24.36000 2.40 23.16100 2.20 22.06200 2.10 20.96250 2.10 20.4
MP 250 (15.6kg) MP 350 (19.7kg) MP 480 (25.00kg) MP 625 (34.8kg)
Cassaform Multiprops are very similar to the Slabprops in that they too are constructed of aluminium. They are slightly heavier in physical unit weight and their respective load capacities slightly less than the Slabprop at the same height. These props are well known and accepted in the construction industry and have been used for many years on building sites in different applications. They provide a simple, quick and easy solution to temporary propping where ever it is needed.
LOAD CHART
100mm
87mm
40mmø 14mmø
150mm
150mm
MULTI PROPS
PROPPING
www.cassaform.com.au P5
PROPPING
ww.cassaform.com.au P5
mm t kN mm t kN mm t kN mm t kN1450 7.50 73.31500 7.50 73.31600 7.50 73.31700 7.50 73.31800 7.30 71.71900 7.00 68.61950 6.80 67.0 1950 9.00 88.32000 6.70 65.4 2000 9.00 88.32100 6.50 63.8 2100 8.50 83.02200 6.30 62.2 2200 7.90 77.72300 6.20 61.1 2300 7.40 72.92400 6.20 60.6 2400 7.00 68.62500 6.10 60.0 2500 6.60 64.4
2600 6.30 61.9 2600 7.30 71.42700 6.00 59.3 2700 7.30 71.12800 5.90 57.5 2800 7.20 70.82900 5.70 55.7 2900 7.20 70.43000 5.50 54.3 3000 6.80 67.13100 5.40 52.9 3100 6.40 63.03200 5.20 51.4 3200 6.00 58.93300 5.10 49.8 3300 5.603400 4.70 46.4 3400 5.40 52.53500 4.40 42.9 3500 5.10 50.2
3600 4.90 47.93700 4.70 46.03800 4.50 44.23900 4.30 42.34000 4.10 40.44100 3.90 38.54200 3.70 36.64300 3.50 34.8 4300 4.50 44.64400 3.40 32.9 4400 4.50 44.64500 3.20 31.1 4500 4.50 44.64600 3.00 29.3 4600 4.50 43.84700 2.80 27.4 4700 4.40 43.04800 2.61 25.6 4800 4.30 42.1
4900 4.20 41.25000 4.10 40.35100 4.00 38.85200 3.70 36.15300 3.40 33.85400 3.30 31.95500 3.00 29.95600 2.90 28.45700 2.70 26.95800 2.60 25.55900 2.50 24.36000 2.40 23.16100 2.20 22.06200 2.10 20.96250 2.10 20.4
MP 250 (15.6kg) MP 350 (19.7kg) MP 480 (25.00kg) MP 625 (34.8kg)
Cassaform Multiprops are very similar to the Slabprops in that they too are constructed of aluminium. They are slightly heavier in physical unit weight and their respective load capacities slightly less than the Slabprop at the same height. These props are well known and accepted in the construction industry and have been used for many years on building sites in different applications. They provide a simple, quick and easy solution to temporary propping where ever it is needed.
LOAD CHART
100mm
87mm
40mmø 14mmø
150mm
150mm
MULTI PROPS
PROPPING
www.cassaform.com.au P5
mm t kN mm t kN mm t kN2020 7.80 77.50 2020 7.80 77.502100 6.80 67.50 2100 7.40 73.902200 5.80 57.60 2200 7.10 70.302300 5.00 49.60 2300 6.70 66.802400 4.80 47.60 2400 6.30 63.20 2400 6.80 67.702500 4.60 45.60 2500 6.00 59.60 2500 6.60 65.702600 4.40 43.60 2600 5.60 56.00 2600 6.40 63.70
2700 5.30 52.50 2700 6.20 61.702800 5.00 49.60 2800 6.00 59.702900 4.90 48.90 2900 5.80 57.603000 4.80 48.10 3000 5.60 55.603100 4.80 47.40 3100 5.40 53.603200 4.70 46.60 3200 5.20 51.603300 4.60 45.90 3300 5.10 50.503400 4.50 45.10 3400 5.00 49.503500 4.50 44.40 3500 4.90 48.403600 4.40 43.60 3600 4.70 47.30
3700 4.60 46.203800 4.50 45.203900 4.40 44.104000 4.30 43.00
2020 - 2650 (15.5kg) 2020 - 3620 (19.6kg) 2400 - 4000 (21.1kg)
The Slabprop is an aluminium light weight prop which is both sturdy and has exceptionalThe high load capacity makes it’s suitable for most re-shoring and formwork applicationsSlabprop comes in four different sizes and ranges in capacity from 43.0 kN to 77.5 kN de
LOAD CHART
13mmø
150mm
150mm
134mm
134mm
SLAB PROPS
PROPPING
www.cassafoP4
PROPPIN
www.caP4P6
Permissible Prop Loads according to the Type Test
PROPPING
ww.cassaform.com.au P5
mm t kN mm t kN mm t kN mm t kN1450 7.50 73.31500 7.50 73.31600 7.50 73.31700 7.50 73.31800 7.30 71.71900 7.00 68.61950 6.80 67.0 1950 9.00 88.32000 6.70 65.4 2000 9.00 88.32100 6.50 63.8 2100 8.50 83.02200 6.30 62.2 2200 7.90 77.72300 6.20 61.1 2300 7.40 72.92400 6.20 60.6 2400 7.00 68.62500 6.10 60.0 2500 6.60 64.4
2600 6.30 61.9 2600 7.30 71.42700 6.00 59.3 2700 7.30 71.12800 5.90 57.5 2800 7.20 70.82900 5.70 55.7 2900 7.20 70.43000 5.50 54.3 3000 6.80 67.13100 5.40 52.9 3100 6.40 63.03200 5.20 51.4 3200 6.00 58.93300 5.10 49.8 3300 5.603400 4.70 46.4 3400 5.40 52.53500 4.40 42.9 3500 5.10 50.2
3600 4.90 47.93700 4.70 46.03800 4.50 44.23900 4.30 42.34000 4.10 40.44100 3.90 38.54200 3.70 36.64300 3.50 34.8 4300 4.50 44.64400 3.40 32.9 4400 4.50 44.64500 3.20 31.1 4500 4.50 44.64600 3.00 29.3 4600 4.50 43.84700 2.80 27.4 4700 4.40 43.04800 2.61 25.6 4800 4.30 42.1
4900 4.20 41.25000 4.10 40.35100 4.00 38.85200 3.70 36.15300 3.40 33.85400 3.30 31.95500 3.00 29.95600 2.90 28.45700 2.70 26.95800 2.60 25.55900 2.50 24.36000 2.40 23.16100 2.20 22.06200 2.10 20.96250 2.10 20.4
MP 250 (15.6kg) MP 350 (19.7kg) MP 480 (25.00kg) MP 625 (34.8kg)
Cassaform Multiprops are very similar to the Slabprops in that they too are constructed of aluminium. They are slightly heavier in physical unit weight and their respective load capacities slightly less than the Slabprop at the same height. These props are well known and accepted in the construction industry and have been used for many years on building sites in different applications. They provide a simple, quick and easy solution to temporary propping where ever it is needed.
LOAD CHART
100mm
87mm
40mmø 14mmø
150mm
150mm
MULTI PROPS
PROPPING
www.cassaform.com.au P5
PROPPING
ww.cassaform.com.au P5
mm t kN mm t kN mm t kN mm t kN1450 7.50 73.31500 7.50 73.31600 7.50 73.31700 7.50 73.31800 7.30 71.71900 7.00 68.61950 6.80 67.0 1950 9.00 88.32000 6.70 65.4 2000 9.00 88.32100 6.50 63.8 2100 8.50 83.02200 6.30 62.2 2200 7.90 77.72300 6.20 61.1 2300 7.40 72.92400 6.20 60.6 2400 7.00 68.62500 6.10 60.0 2500 6.60 64.4
2600 6.30 61.9 2600 7.30 71.42700 6.00 59.3 2700 7.30 71.12800 5.90 57.5 2800 7.20 70.82900 5.70 55.7 2900 7.20 70.43000 5.50 54.3 3000 6.80 67.13100 5.40 52.9 3100 6.40 63.03200 5.20 51.4 3200 6.00 58.93300 5.10 49.8 3300 5.603400 4.70 46.4 3400 5.40 52.53500 4.40 42.9 3500 5.10 50.2
3600 4.90 47.93700 4.70 46.03800 4.50 44.23900 4.30 42.34000 4.10 40.44100 3.90 38.54200 3.70 36.64300 3.50 34.8 4300 4.50 44.64400 3.40 32.9 4400 4.50 44.64500 3.20 31.1 4500 4.50 44.64600 3.00 29.3 4600 4.50 43.84700 2.80 27.4 4700 4.40 43.04800 2.61 25.6 4800 4.30 42.1
4900 4.20 41.25000 4.10 40.35100 4.00 38.85200 3.70 36.15300 3.40 33.85400 3.30 31.95500 3.00 29.95600 2.90 28.45700 2.70 26.95800 2.60 25.55900 2.50 24.36000 2.40 23.16100 2.20 22.06200 2.10 20.96250 2.10 20.4
MP 250 (15.6kg) MP 350 (19.7kg) MP 480 (25.00kg) MP 625 (34.8kg)
Cassaform Multiprops are very similar to the Slabprops in that they too are constructed of aluminium. They are slightly heavier in physical unit weight and their respective load capacities slightly less than the Slabprop at the same height. These props are well known and accepted in the construction industry and have been used for many years on building sites in different applications. They provide a simple, quick and easy solution to temporary propping where ever it is needed.
LOAD CHART
100mm
87mm
40mmø 14mmø
150mm
150mm
MULTI PROPS
PROPPING
www.cassaform.com.au P5
PROPPING
ww.cassaform.com.au P5
mm t kN mm t kN mm t kN mm t kN1450 7.50 73.31500 7.50 73.31600 7.50 73.31700 7.50 73.31800 7.30 71.71900 7.00 68.61950 6.80 67.0 1950 9.00 88.32000 6.70 65.4 2000 9.00 88.32100 6.50 63.8 2100 8.50 83.02200 6.30 62.2 2200 7.90 77.72300 6.20 61.1 2300 7.40 72.92400 6.20 60.6 2400 7.00 68.62500 6.10 60.0 2500 6.60 64.4
2600 6.30 61.9 2600 7.30 71.42700 6.00 59.3 2700 7.30 71.12800 5.90 57.5 2800 7.20 70.82900 5.70 55.7 2900 7.20 70.43000 5.50 54.3 3000 6.80 67.13100 5.40 52.9 3100 6.40 63.03200 5.20 51.4 3200 6.00 58.93300 5.10 49.8 3300 5.603400 4.70 46.4 3400 5.40 52.53500 4.40 42.9 3500 5.10 50.2
3600 4.90 47.93700 4.70 46.03800 4.50 44.23900 4.30 42.34000 4.10 40.44100 3.90 38.54200 3.70 36.64300 3.50 34.8 4300 4.50 44.64400 3.40 32.9 4400 4.50 44.64500 3.20 31.1 4500 4.50 44.64600 3.00 29.3 4600 4.50 43.84700 2.80 27.4 4700 4.40 43.04800 2.61 25.6 4800 4.30 42.1
4900 4.20 41.25000 4.10 40.35100 4.00 38.85200 3.70 36.15300 3.40 33.85400 3.30 31.95500 3.00 29.95600 2.90 28.45700 2.70 26.95800 2.60 25.55900 2.50 24.36000 2.40 23.16100 2.20 22.06200 2.10 20.96250 2.10 20.4
MP 250 (15.6kg) MP 350 (19.7kg) MP 480 (25.00kg) MP 625 (34.8kg)
Cassaform Multiprops are very similar to the Slabprops in that they too are constructed of aluminium. They are slightly heavier in physical unit weight and their respective load capacities slightly less than the Slabprop at the same height. These props are well known and accepted in the construction industry and have been used for many years on building sites in different applications. They provide a simple, quick and easy solution to temporary propping where ever it is needed.
LOAD CHART
100mm
87mm
40mmø 14mmø
150mm
150mm
MULTI PROPS
PROPPING
www.cassaform.com.au P5
PROPPING
ww.cassaform.com.au P5
mm t kN mm t kN mm t kN mm t kN1450 7.50 73.31500 7.50 73.31600 7.50 73.31700 7.50 73.31800 7.30 71.71900 7.00 68.61950 6.80 67.0 1950 9.00 88.32000 6.70 65.4 2000 9.00 88.32100 6.50 63.8 2100 8.50 83.02200 6.30 62.2 2200 7.90 77.72300 6.20 61.1 2300 7.40 72.92400 6.20 60.6 2400 7.00 68.62500 6.10 60.0 2500 6.60 64.4
2600 6.30 61.9 2600 7.30 71.42700 6.00 59.3 2700 7.30 71.12800 5.90 57.5 2800 7.20 70.82900 5.70 55.7 2900 7.20 70.43000 5.50 54.3 3000 6.80 67.13100 5.40 52.9 3100 6.40 63.03200 5.20 51.4 3200 6.00 58.93300 5.10 49.8 3300 5.603400 4.70 46.4 3400 5.40 52.53500 4.40 42.9 3500 5.10 50.2
3600 4.90 47.93700 4.70 46.03800 4.50 44.23900 4.30 42.34000 4.10 40.44100 3.90 38.54200 3.70 36.64300 3.50 34.8 4300 4.50 44.64400 3.40 32.9 4400 4.50 44.64500 3.20 31.1 4500 4.50 44.64600 3.00 29.3 4600 4.50 43.84700 2.80 27.4 4700 4.40 43.04800 2.61 25.6 4800 4.30 42.1
4900 4.20 41.25000 4.10 40.35100 4.00 38.85200 3.70 36.15300 3.40 33.85400 3.30 31.95500 3.00 29.95600 2.90 28.45700 2.70 26.95800 2.60 25.55900 2.50 24.36000 2.40 23.16100 2.20 22.06200 2.10 20.96250 2.10 20.4
MP 250 (15.6kg) MP 350 (19.7kg) MP 480 (25.00kg) MP 625 (34.8kg)
Cassaform Multiprops are very similar to the Slabprops in that they too are constructed of aluminium. They are slightly heavier in physical unit weight and their respective load capacities slightly less than the Slabprop at the same height. These props are well known and accepted in the construction industry and have been used for many years on building sites in different applications. They provide a simple, quick and easy solution to temporary propping where ever it is needed.
LOAD CHART
100mm
87mm
40mmø 14mmø
150mm
150mm
MULTI PROPS
PROPPING
www.cassaform.com.au P5
PROPPING
ww.cassaform.com.au P5
mm t kN mm t kN mm t kN mm t kN1450 7.50 73.31500 7.50 73.31600 7.50 73.31700 7.50 73.31800 7.30 71.71900 7.00 68.61950 6.80 67.0 1950 9.00 88.32000 6.70 65.4 2000 9.00 88.32100 6.50 63.8 2100 8.50 83.02200 6.30 62.2 2200 7.90 77.72300 6.20 61.1 2300 7.40 72.92400 6.20 60.6 2400 7.00 68.62500 6.10 60.0 2500 6.60 64.4
2600 6.30 61.9 2600 7.30 71.42700 6.00 59.3 2700 7.30 71.12800 5.90 57.5 2800 7.20 70.82900 5.70 55.7 2900 7.20 70.43000 5.50 54.3 3000 6.80 67.13100 5.40 52.9 3100 6.40 63.03200 5.20 51.4 3200 6.00 58.93300 5.10 49.8 3300 5.603400 4.70 46.4 3400 5.40 52.53500 4.40 42.9 3500 5.10 50.2
3600 4.90 47.93700 4.70 46.03800 4.50 44.23900 4.30 42.34000 4.10 40.44100 3.90 38.54200 3.70 36.64300 3.50 34.8 4300 4.50 44.64400 3.40 32.9 4400 4.50 44.64500 3.20 31.1 4500 4.50 44.64600 3.00 29.3 4600 4.50 43.84700 2.80 27.4 4700 4.40 43.04800 2.61 25.6 4800 4.30 42.1
4900 4.20 41.25000 4.10 40.35100 4.00 38.85200 3.70 36.15300 3.40 33.85400 3.30 31.95500 3.00 29.95600 2.90 28.45700 2.70 26.95800 2.60 25.55900 2.50 24.36000 2.40 23.16100 2.20 22.06200 2.10 20.96250 2.10 20.4
MP 250 (15.6kg) MP 350 (19.7kg) MP 480 (25.00kg) MP 625 (34.8kg)
Cassaform Multiprops are very similar to the Slabprops in that they too are constructed of aluminium. They are slightly heavier in physical unit weight and their respective load capacities slightly less than the Slabprop at the same height. These props are well known and accepted in the construction industry and have been used for many years on building sites in different applications. They provide a simple, quick and easy solution to temporary propping where ever it is needed.
LOAD CHART
100mm
87mm
40mmø 14mmø
150mm
150mm
MULTI PROPS
PROPPING
www.cassaform.com.au P5
PROPPING
ww.cassaform.com.au P5
mm t kN mm t kN mm t kN mm t kN1450 7.50 73.31500 7.50 73.31600 7.50 73.31700 7.50 73.31800 7.30 71.71900 7.00 68.61950 6.80 67.0 1950 9.00 88.32000 6.70 65.4 2000 9.00 88.32100 6.50 63.8 2100 8.50 83.02200 6.30 62.2 2200 7.90 77.72300 6.20 61.1 2300 7.40 72.92400 6.20 60.6 2400 7.00 68.62500 6.10 60.0 2500 6.60 64.4
2600 6.30 61.9 2600 7.30 71.42700 6.00 59.3 2700 7.30 71.12800 5.90 57.5 2800 7.20 70.82900 5.70 55.7 2900 7.20 70.43000 5.50 54.3 3000 6.80 67.13100 5.40 52.9 3100 6.40 63.03200 5.20 51.4 3200 6.00 58.93300 5.10 49.8 3300 5.603400 4.70 46.4 3400 5.40 52.53500 4.40 42.9 3500 5.10 50.2
3600 4.90 47.93700 4.70 46.03800 4.50 44.23900 4.30 42.34000 4.10 40.44100 3.90 38.54200 3.70 36.64300 3.50 34.8 4300 4.50 44.64400 3.40 32.9 4400 4.50 44.64500 3.20 31.1 4500 4.50 44.64600 3.00 29.3 4600 4.50 43.84700 2.80 27.4 4700 4.40 43.04800 2.61 25.6 4800 4.30 42.1
4900 4.20 41.25000 4.10 40.35100 4.00 38.85200 3.70 36.15300 3.40 33.85400 3.30 31.95500 3.00 29.95600 2.90 28.45700 2.70 26.95800 2.60 25.55900 2.50 24.36000 2.40 23.16100 2.20 22.06200 2.10 20.96250 2.10 20.4
MP 250 (15.6kg) MP 350 (19.7kg) MP 480 (25.00kg) MP 625 (34.8kg)
Cassaform Multiprops are very similar to the Slabprops in that they too are constructed of aluminium. They are slightly heavier in physical unit weight and their respective load capacities slightly less than the Slabprop at the same height. These props are well known and accepted in the construction industry and have been used for many years on building sites in different applications. They provide a simple, quick and easy solution to temporary propping where ever it is needed.
LOAD CHART
100mm
87mm
40mmø 14mmø
150mm
150mm
MULTI PROPS
PROPPING
www.cassaform.com.au P5
31 5 633333333
54.854.854.8.84.84.84.8.8.834.83333333333335
30333
Cassaform Super Prop is capable of supporting ten times the load capacity of a standard Acrow prop. They are a structurally solid prop with a massive load capacity of up to 12 tonne which can be easily handled into awkward locations. difficult to install. Ideally suited for tight and difficult access applications where the floor to ceiling height does not exceed 4 metres.
mm t kN2400 12.10 118.62500 12.10 118.62600 11.80 115.72700 11.50 112.72800 11.10 108.82900 10.60 103.93000 10.10 99.03100 9.70 95.13200 9.30 91.23300 8.90 87.23400 8.50 83.33500 8.10 79.43600 7.70 75.53700 7.40 72.53800 7.00 68.63900 6.70 65.74000 6.40 62.7
(55kg)
LOAD CHART
13mmø
200mm
100mm
100mm
200mm
20mmø
180mm
150mm
SUPER PROPS
PROPPING
www.cassaform.com.auP6
PROPPING
www.cassaform.com.aP6
mm t kN mm t kN mm t kN mm t kN2020 7.80 77.50 2020 7.80 77.502100 6.80 67.50 2100 7.40 73.902200 5.80 57.60 2200 7.10 70.302300 5.00 49.60 2300 6.70 66.802400 4.80 47.60 2400 6.30 63.20 2400 6.80 67.702500 4.60 45.60 2500 6.00 59.60 2500 6.60 65.702600 4.40 43.60 2600 5.60 56.00 2600 6.40 63.70
2700 5.30 52.50 2700 6.20 61.702800 5.00 49.60 2800 6.00 59.702900 4.90 48.90 2900 5.80 57.603000 4.80 48.10 3000 5.60 55.603100 4.80 47.40 3100 5.40 53.603200 4.70 46.60 3200 5.20 51.603300 4.60 45.90 3300 5.10 50.503400 4.50 45.10 3400 5.00 49.503500 4.50 44.40 3500 4.90 48.403600 4.40 43.60 3600 4.70 47.30 3600 6.80 67.70
3700 4.60 46.20 3700 6.60 65.703800 4.50 45.20 3800 6.40 63.703900 4.40 44.10 3900 6.20 61.704000 4.30 43.00 4000 6.00 59.70
4100 5.80 57.604200 5.60 55.604300 5.40 53.604400 5.20 51.604500 5.10 50.504600 5.00 49.504700 4.90 48.404800 4.70 47.304900 4.60 46.205000 4.50 45.205100 4.40 44.105200 4.30 43.00
2020 - 2650 (15.5kg) 2020 - 3620 (19.6kg) 2400 - 4000 (21.1kg) 3600 - 5200 (25.8kg)
The Slabprop is an aluminium light weight prop which is both sturdy and has exceptional safety characteristics. The high load capacity makes it’s suitable for most re-shoring and formwork applications and casting of slabs. The Slabprop comes in four different sizes and ranges in capacity from 43.0 kN to 77.5 kN depending on the extended
LOAD CHART
13mmø
150mm
150mm
134mm
134mm
SLAB PROPS
PROPPING
www.cassaform.com.auP4
PROPPING
www.cassaform.com.aP4
mm t kN mm t kN mm t kN mm t kN2020 7.80 77.50 2020 7.80 77.502100 6.80 67.50 2100 7.40 73.902200 5.80 57.60 2200 7.10 70.302300 5.00 49.60 2300 6.70 66.802400 4.80 47.60 2400 6.30 63.20 2400 6.80 67.702500 4.60 45.60 2500 6.00 59.60 2500 6.60 65.702600 4.40 43.60 2600 5.60 56.00 2600 6.40 63.70
2700 5.30 52.50 2700 6.20 61.702800 5.00 49.60 2800 6.00 59.702900 4.90 48.90 2900 5.80 57.603000 4.80 48.10 3000 5.60 55.603100 4.80 47.40 3100 5.40 53.603200 4.70 46.60 3200 5.20 51.603300 4.60 45.90 3300 5.10 50.503400 4.50 45.10 3400 5.00 49.503500 4.50 44.40 3500 4.90 48.403600 4.40 43.60 3600 4.70 47.30 3600 6.80 67.70
3700 4.60 46.20 3700 6.60 65.703800 4.50 45.20 3800 6.40 63.703900 4.40 44.10 3900 6.20 61.704000 4.30 43.00 4000 6.00 59.70
4100 5.80 57.604200 5.60 55.604300 5.40 53.604400 5.20 51.604500 5.10 50.504600 5.00 49.504700 4.90 48.404800 4.70 47.304900 4.60 46.205000 4.50 45.205100 4.40 44.105200 4.30 43.00
2020 - 2650 (15.5kg) 2020 - 3620 (19.6kg) 2400 - 4000 (21.1kg) 3600 - 5200 (25.8kg)
bprop is an aluminium light weight prop which is both sturdy and has exceptional safety characteristics. gh load capacity makes it’s suitable for most re-shoring and formwork applications and casting of slabs. The op comes in four different sizes and ranges in capacity from 43.0 kN to 77.5 kN depending on the extended
LOAD CHART
13mmø
150mm
150mm
134mm
134mm
B PROPS
PROPPING
www.cassaform.com.auP4
PROPPING
www.cassaform.com.auP4P7
mm t kN mm t kN mm t kN mm t kN2020 7.80 77.50 2020 7.80 77.502100 6.80 67.50 2100 7.40 73.902200 5.80 57.60 2200 7.10 70.302300 5.00 49.60 2300 6.70 66.802400 4.80 47.60 2400 6.30 63.20 2400 6.80 67.702500 4.60 45.60 2500 6.00 59.60 2500 6.60 65.702600 4.40 43.60 2600 5.60 56.00 2600 6.40 63.70
2700 5.30 52.50 2700 6.20 61.702800 5.00 49.60 2800 6.00 59.702900 4.90 48.90 2900 5.80 57.603000 4.80 48.10 3000 5.60 55.603100 4.80 47.40 3100 5.40 53.603200 4.70 46.60 3200 5.20 51.603300 4.60 45.90 3300 5.10 50.503400 4.50 45.10 3400 5.00 49.503500 4.50 44.40 3500 4.90 48.403600 4.40 43.60 3600 4.70 47.30 3600 6.80 67.70
3700 4.60 46.20 3700 6.60 65.703800 4.50 45.20 3800 6.40 63.703900 4.40 44.10 3900 6.20 61.704000 4.30 43.00 4000 6.00 59.70
4100 5.80 57.604200 5.60 55.604300 5.40 53.604400 5.20 51.604500 5.10 50.504600 5.00 49.504700 4.90 48.404800 4.70 47.304900 4.60 46.205000 4.50 45.205100 4.40 44.105200 4.30 43.00
2020 - 2650 (15.5kg) 2020 - 3620 (19.6kg) 2400 - 4000 (21.1kg) 3600 - 5200 (25.8kg)
The Slabprop is an aluminium light weight prop which is both sturdy and has exceptional safety characteristics. The high load capacity makes it’s suitable for most re-shoring and formwork applications and casting of slabs. The Slabprop comes in four different sizes and ranges in capacity from 43.0 kN to 77.5 kN depending on the extended
LOAD CHART
13mmø
150mm
150mm
134mm
134mm
SLAB PROPS
PROPPING
www.cassaform.com.auP4
PROPPING
www.cassaform.com.aP4
PROPPING
ww.cassaform.com.au P5
mm t kN mm t kN mm t kN mm t kN1450 7.50 73.31500 7.50 73.31600 7.50 73.31700 7.50 73.31800 7.30 71.71900 7.00 68.61950 6.80 67.0 1950 9.00 88.32000 6.70 65.4 2000 9.00 88.32100 6.50 63.8 2100 8.50 83.02200 6.30 62.2 2200 7.90 77.72300 6.20 61.1 2300 7.40 72.92400 6.20 60.6 2400 7.00 68.62500 6.10 60.0 2500 6.60 64.4
2600 6.30 61.9 2600 7.30 71.42700 6.00 59.3 2700 7.30 71.12800 5.90 57.5 2800 7.20 70.82900 5.70 55.7 2900 7.20 70.43000 5.50 54.3 3000 6.80 67.13100 5.40 52.9 3100 6.40 63.03200 5.20 51.4 3200 6.00 58.93300 5.10 49.8 3300 5.60 54.83400 4.70 46.4 3400 5.40 52.53500 4.40 42.9 3500 5.10 50.2
3600 4.90 47.93700 4.70 46.03800 4.50 44.23900 4.30 42.34000 4.10 40.44100 3.90 38.54200 3.70 36.64300 3.50 34.8 4300 4.50 44.64400 3.40 32.9 4400 4.50 44.64500 3.20 31.1 4500 4.50 44.64600 3.00 29.3 4600 4.50 43.84700 2.80 27.4 4700 4.40 43.04800 2.61 25.6 4800 4.30 42.1
4900 4.20 41.25000 4.10 40.35100 4.00 38.85200 3.70 36.15300 3.40 33.85400 3.30 31.95500 3.00 29.95600 2.90 28.45700 2.70 26.95800 2.60 25.55900 2.50 24.36000 2.40 23.16100 2.20 22.06200 2.10 20.96250 2.10 20.4
MP 250 (15.6kg) MP 350 (19.7kg) MP 480 (25.00kg) MP 625 (34.8kg)
Cassaform Multiprops are very similar to the Slabprops in that they too are constructed of aluminium. They are slightly heavier in physical unit weight and their respective load capacities slightly less than the Slabprop at the same height. These props are well known and accepted in the construction industry and have been used for many years on building sites in different applications. They provide a simple, quick and easy solution to temporary propping where ever it is needed.
LOAD CHART
100mm
87mm
40mmø 14mmø
150mm
150mm
MULTI PROPS
PROPPING
www.cassaform.com.au P5
PROPPING
ww.cassaform.com.au P5
mm t kN mm t kN mm t kN mm t kN1450 7.50 73.31500 7.50 73.31600 7.50 73.31700 7.50 73.31800 7.30 71.71900 7.00 68.61950 6.80 67.0 1950 9.00 88.32000 6.70 65.4 2000 9.00 88.32100 6.50 63.8 2100 8.50 83.02200 6.30 62.2 2200 7.90 77.72300 6.20 61.1 2300 7.40 72.92400 6.20 60.6 2400 7.00 68.62500 6.10 60.0 2500 6.60 64.4
2600 6.30 61.9 2600 7.30 71.42700 6.00 59.3 2700 7.30 71.12800 5.90 57.5 2800 7.20 70.82900 5.70 55.7 2900 7.20 70.43000 5.50 54.3 3000 6.80 67.13100 5.40 52.9 3100 6.40 63.03200 5.20 51.4 3200 6.00 58.93300 5.10 49.8 3300 5.60 54.83400 4.70 46.4 3400 5.40 52.53500 4.40 42.9 3500 5.10 50.2
3600 4.90 47.93700 4.70 46.03800 4.50 44.23900 4.30 42.34000 4.10 40.44100 3.90 38.54200 3.70 36.64300 3.50 34.8 4300 4.50 44.64400 3.40 32.9 4400 4.50 44.64500 3.20 31.1 4500 4.50 44.64600 3.00 29.3 4600 4.50 43.84700 2.80 27.4 4700 4.40 43.04800 2.61 25.6 4800 4.30 42.1
4900 4.20 41.25000 4.10 40.35100 4.00 38.85200 3.70 36.15300 3.40 33.85400 3.30 31.95500 3.00 29.95600 2.90 28.45700 2.70 26.95800 2.60 25.55900 2.50 24.36000 2.40 23.16100 2.20 22.06200 2.10 20.96250 2.10 20.4
MP 250 (15.6kg) MP 350 (19.7kg) MP 480 (25.00kg) MP 625 (34.8kg)
Cassaform Multiprops are very similar to the Slabprops in that they too are constructed of aluminium. They are slightly heavier in physical unit weight and their respective load capacities slightly less than the Slabprop at the same height. These props are well known and accepted in the construction industry and have been used for many years on building sites in different applications. They provide a simple, quick and easy solution to temporary propping where ever it is needed.
LOAD CHART
100mm
87mm
40mmø 14mmø
150mm
150mm
MULTI PROPS
PROPPING
www.cassaform.com.au P5
mm t kN mm t kN mm t kN2020 7.80 77.50 2020 7.80 77.502100 6.80 67.50 2100 7.40 73.902200 5.80 57.60 2200 7.10 70.302300 5.00 49.60 2300 6.70 66.802400 4.80 47.60 2400 6.30 63.20 2400 6.80 67.702500 4.60 45.60 2500 6.00 59.60 2500 6.60 65.702600 4.40 43.60 2600 5.60 56.00 2600 6.40 63.70
2700 5.30 52.50 2700 6.20 61.702800 5.00 49.60 2800 6.00 59.702900 4.90 48.90 2900 5.80 57.603000 4.80 48.10 3000 5.60 55.603100 4.80 47.40 3100 5.40 53.603200 4.70 46.60 3200 5.20 51.603300 4.60 45.90 3300 5.10 50.503400 4.50 45.10 3400 5.00 49.503500 4.50 44.40 3500 4.90 48.403600 4.40 43.60 3600 4.70 47.30
3700 4.60 46.203800 4.50 45.203900 4.40 44.104000 4.30 43.00
2020 - 2650 (15.5kg) 2020 - 3620 (19.6kg) 2400 - 4000 (21.1kg)
The Slabprop is an aluminium light weight prop which is both sturdy and has exceptionalThe high load capacity makes it’s suitable for most re-shoring and formwork applicationsSlabprop comes in four different sizes and ranges in capacity from 43.0 kN to 77.5 kN de
LOAD CHART
13mmø
150mm
150mm
134mm
134mm
SLAB PROPS
PROPPING
www.cassafoP4
PROPPIN
www.caP4P8
PUSH PULL RANGEIf you are required to support lateral loads like vertical formwork shutters for walls, concrete tilt panels, or existing walls during demolition the phase then look no further than Cassaform Push Pull Prop range for all your solutions. We can even assist with your engineering requirements to help specify the right type of props for your project.
All products are manufactured under a Quality Assured System, Certified to ISO9001 and meet all requirements of AS3850, AS1170, AS3600 & AS4100.
All products are Australian Made from Quality Australian Duragal high strength square hollow sections.
The design capacities and Working Load Limits of Cassaform’s Push Pull Prop Range have been derived from extensive manufacturer’s research and verified with load testing.
PUSH PULL SAFETY BRACE PROPS
Prop Type Description Weight
(kg)
Closed Position
(m)kN
Fully Extended
(m)kN
Type A Trench Mini 20 1.2 35 1.8 30
Type B Super Trench 27 1.5 35 2.5 30
Type C Super Mini 36 2.4 35 4.10 25
Type D Mini 38 2.6 35 4.4 30
Type E Standard 54 4.4 40 6.8 14
Type F Jumbo 78 6.2 25 10.0 6
Type G Super Jumbo 106 6.4 30 11.5 8
30T PROPCassaform’s 30t Prop is a heavy duty structural propping and shoring system specifically suited to the building and civil infrastructure industries.
The 30t Prop is a modular system which provides a custom solution for almost any application on building sites. It is assembled using different components connected together to achieve the desired height or length required. Refer to the Height/ Component Chart opposite for details.
Despite its high load-bearing capacities it is so versatile that it can be easily assembled in difficult access locations. This flexibility is achieved with the use of standard componentry and accessories which includes:
• Standard Section -2000mm, 1000mm, 500mm, 250mm and 125mm • Screws jacks, • Racking heads, • Needle beam fixing clamps and • Transfer fixing plates.
All these components have been manufactured and sized to allow manual handling where necessary and can be assembled into a wide variety of towers and truss designs to suit almost any application.
The Cassaform 30t Prop has a safe axial capacity of 30 tonnes and is used extensively in the civil and building industries where a range of vertical, horizontal and raking applications are necessary, across large and small scale projects. For example, bridge and roof supports, slab back propping, façade retention, falsework, & formwork or raking and needling applications.
APPLICATIONS & FEATURES• Adjustable jack
• Easy / Fast onsite assembly
• Holes in both flanges enables bracing and bolting in either direction.
• Modular components are assembled from off the shelf items therefore reducing lead time
• Wide range of accessories including screw jacks, racking heads, needle beam fixing clamps, end connectors, and transfer fixing plates
Refer to AS 3610 for acceptable criteria for installation, bracing, and eccentricity of loading.
mm t kN mm t kN mm t kN mm t kN2020 7.80 77.50 2020 7.80 77.502100 6.80 67.50 2100 7.40 73.902200 5.80 57.60 2200 7.10 70.302300 5.00 49.60 2300 6.70 66.802400 4.80 47.60 2400 6.30 63.20 2400 6.80 67.702500 4.60 45.60 2500 6.00 59.60 2500 6.60 65.702600 4.40 43.60 2600 5.60 56.00 2600 6.40 63.70
2700 5.30 52.50 2700 6.20 61.702800 5.00 49.60 2800 6.00 59.702900 4.90 48.90 2900 5.80 57.603000 4.80 48.10 3000 5.60 55.603100 4.80 47.40 3100 5.40 53.603200 4.70 46.60 3200 5.20 51.603300 4.60 45.90 3300 5.10 50.503400 4.50 45.10 3400 5.00 49.503500 4.50 44.40 3500 4.90 48.403600 4.40 43.60 3600 4.70 47.30 3600 6.80 67.70
3700 4.60 46.20 3700 6.60 65.703800 4.50 45.20 3800 6.40 63.703900 4.40 44.10 3900 6.20 61.704000 4.30 43.00 4000 6.00 59.70
4100 5.80 57.604200 5.60 55.604300 5.40 53.604400 5.20 51.604500 5.10 50.504600 5.00 49.504700 4.90 48.404800 4.70 47.304900 4.60 46.205000 4.50 45.205100 4.40 44.105200 4.30 43.00
2020 - 2650 (15.5kg) 2020 - 3620 (19.6kg) 2400 - 4000 (21.1kg) 3600 - 5200 (25.8kg)
The Slabprop is an aluminium light weight prop which is both sturdy and has exceptional safety characteristics. The high load capacity makes it’s suitable for most re-shoring and formwork applications and casting of slabs. The Slabprop comes in four different sizes and ranges in capacity from 43.0 kN to 77.5 kN depending on the extended
LOAD CHART
13mmø
150mm
150mm
134mm
134mm
SLAB PROPS
PROPPING
www.cassaform.com.auP4
PROPPING
www.cassaform.com.aP4
mm t kN mm t kN mm t kN mm t kN2020 7.80 77.50 2020 7.80 77.502100 6.80 67.50 2100 7.40 73.902200 5.80 57.60 2200 7.10 70.302300 5.00 49.60 2300 6.70 66.802400 4.80 47.60 2400 6.30 63.20 2400 6.80 67.702500 4.60 45.60 2500 6.00 59.60 2500 6.60 65.702600 4.40 43.60 2600 5.60 56.00 2600 6.40 63.70
2700 5.30 52.50 2700 6.20 61.702800 5.00 49.60 2800 6.00 59.702900 4.90 48.90 2900 5.80 57.603000 4.80 48.10 3000 5.60 55.603100 4.80 47.40 3100 5.40 53.603200 4.70 46.60 3200 5.20 51.603300 4.60 45.90 3300 5.10 50.503400 4.50 45.10 3400 5.00 49.503500 4.50 44.40 3500 4.90 48.403600 4.40 43.60 3600 4.70 47.30 3600 6.80 67.70
3700 4.60 46.20 3700 6.60 65.703800 4.50 45.20 3800 6.40 63.703900 4.40 44.10 3900 6.20 61.704000 4.30 43.00 4000 6.00 59.70
4100 5.80 57.604200 5.60 55.604300 5.40 53.604400 5.20 51.604500 5.10 50.504600 5.00 49.504700 4.90 48.404800 4.70 47.304900 4.60 46.205000 4.50 45.205100 4.40 44.105200 4.30 43.00
2020 - 2650 (15.5kg) 2020 - 3620 (19.6kg) 2400 - 4000 (21.1kg) 3600 - 5200 (25.8kg)
The Slabprop is an aluminium light weight prop which is both sturdy and has exceptional safety characteristics. The high load capacity makes it’s suitable for most re-shoring and formwork applications and casting of slabs. The Slabprop comes in four different sizes and ranges in capacity from 43.0 kN to 77.5 kN depending on the extended
LOAD CHART
13mmø
150mm
150mm
134mm
134mm
SLAB PROPS
PROPPING
www.cassaform.com.auP4
PROPPING
www.cassaform.com.aP4
mm t kN mm t kN mm t kN mm t kN2020 7.80 77.50 2020 7.80 77.502100 6.80 67.50 2100 7.40 73.902200 5.80 57.60 2200 7.10 70.302300 5.00 49.60 2300 6.70 66.802400 4.80 47.60 2400 6.30 63.20 2400 6.80 67.702500 4.60 45.60 2500 6.00 59.60 2500 6.60 65.702600 4.40 43.60 2600 5.60 56.00 2600 6.40 63.70
2700 5.30 52.50 2700 6.20 61.702800 5.00 49.60 2800 6.00 59.702900 4.90 48.90 2900 5.80 57.603000 4.80 48.10 3000 5.60 55.603100 4.80 47.40 3100 5.40 53.603200 4.70 46.60 3200 5.20 51.603300 4.60 45.90 3300 5.10 50.503400 4.50 45.10 3400 5.00 49.503500 4.50 44.40 3500 4.90 48.403600 4.40 43.60 3600 4.70 47.30 3600 6.80 67.70
3700 4.60 46.20 3700 6.60 65.703800 4.50 45.20 3800 6.40 63.703900 4.40 44.10 3900 6.20 61.704000 4.30 43.00 4000 6.00 59.70
4100 5.80 57.604200 5.60 55.604300 5.40 53.604400 5.20 51.604500 5.10 50.504600 5.00 49.504700 4.90 48.404800 4.70 47.304900 4.60 46.205000 4.50 45.205100 4.40 44.105200 4.30 43.00
2020 - 2650 (15.5kg) 2020 - 3620 (19.6kg) 2400 - 4000 (21.1kg) 3600 - 5200 (25.8kg)
bprop is an aluminium light weight prop which is both sturdy and has exceptional safety characteristics. gh load capacity makes it’s suitable for most re-shoring and formwork applications and casting of slabs. The op comes in four different sizes and ranges in capacity from 43.0 kN to 77.5 kN depending on the extended
LOAD CHART
13mmø
150mm
150mm
134mm
134mm
B PROPS
PROPPING
www.cassaform.com.auP4
PROPPING
www.cassaform.com.auP4P9
Screw Jack Standard Sections
Transfer fixing plates
SCREW JACKBASE 190mm SQUARE
STANDARD SECTIONS
END CONNECTORS
30°30°
30°30°
IT M
UST
NOT
BE U
SED,
CO
PIED
, REP
RODU
CED
CHEC
KED
DATE
CLIE
NT
PROJ
ECT
JOB
No.
CASS
AFOR
M PT
Y LT
D.TI
TLE
DRAW
N
SCAL
E
OR
DISC
LOSE
D W
ITHO
UT W
RITT
EN P
ERM
ISSI
ON
DRG
No.
REVI
SION
BYRE
VCH
ECKE
DDA
TEDE
SCRI
PTIO
N
THIS
DRA
WIN
G IS
RES
ERVE
D PR
OPER
TY O
F
85 C
herry
Lane
, Lav
erton
Nor
th VI
C 30
26Te
lepho
ne: 1
300 7
45 67
4
Web
:www
.cass
aform
.com.
auFa
csim
ile: +
613 9
368 9
499
6ISS
UED F
OR CO
ORDIN
ATIO
N ONL
YJC
TM28
/05/18
30°
REV DESCRIPTION
8T
6 ISSUED FOR COORDINATION ONLY
Please add the following pictures of components
Needle beam fixing clamps,
Racking heads
IT MUST NOT BE USED, COPIED, REPRODUCED
CHECKED
DATE
T
JOB No.
CASSAFORM PTY LTD.
DRAWN
SCALE
OR DISCLOSED WITHOUT WRITTEN PERMISSION
DRG No. REVISION
THIS DRAWING IS RESERVED PROPERTY OF
PROPPING
ww.cassaform.com.au P5
mm t kN mm t kN mm t kN mm t kN1450 7.50 73.31500 7.50 73.31600 7.50 73.31700 7.50 73.31800 7.30 71.71900 7.00 68.61950 6.80 67.0 1950 9.00 88.32000 6.70 65.4 2000 9.00 88.32100 6.50 63.8 2100 8.50 83.02200 6.30 62.2 2200 7.90 77.72300 6.20 61.1 2300 7.40 72.92400 6.20 60.6 2400 7.00 68.62500 6.10 60.0 2500 6.60 64.4
2600 6.30 61.9 2600 7.30 71.42700 6.00 59.3 2700 7.30 71.12800 5.90 57.5 2800 7.20 70.82900 5.70 55.7 2900 7.20 70.43000 5.50 54.3 3000 6.80 67.13100 5.40 52.9 3100 6.40 63.03200 5.20 51.4 3200 6.00 58.93300 5.10 49.8 3300 5.60 54.83400 4.70 46.4 3400 5.40 52.53500 4.40 42.9 3500 5.10 50.2
3600 4.90 47.93700 4.70 46.03800 4.50 44.23900 4.30 42.34000 4.10 40.44100 3.90 38.54200 3.70 36.64300 3.50 34.8 4300 4.50 44.64400 3.40 32.9 4400 4.50 44.64500 3.20 31.1 4500 4.50 44.64600 3.00 29.3 4600 4.50 43.84700 2.80 27.4 4700 4.40 43.04800 2.61 25.6 4800 4.30 42.1
4900 4.20 41.25000 4.10 40.35100 4.00 38.85200 3.70 36.15300 3.40 33.85400 3.30 31.95500 3.00 29.95600 2.90 28.45700 2.70 26.95800 2.60 25.55900 2.50 24.36000 2.40 23.16100 2.20 22.06200 2.10 20.96250 2.10 20.4
MP 250 (15.6kg) MP 350 (19.7kg) MP 480 (25.00kg) MP 625 (34.8kg)
Cassaform Multiprops are very similar to the Slabprops in that they too are constructed of aluminium. They are slightly heavier in physical unit weight and their respective load capacities slightly less than the Slabprop at the same height. These props are well known and accepted in the construction industry and have been used for many years on building sites in different applications. They provide a simple, quick and easy solution to temporary propping where ever it is needed.
LOAD CHART
100mm
87mm
40mmø 14mmø
150mm
150mm
MULTI PROPS
PROPPING
www.cassaform.com.au P5
PROPPING
ww.cassaform.com.au P5
mm t kN mm t kN mm t kN mm t kN1450 7.50 73.31500 7.50 73.31600 7.50 73.31700 7.50 73.31800 7.30 71.71900 7.00 68.61950 6.80 67.0 1950 9.00 88.32000 6.70 65.4 2000 9.00 88.32100 6.50 63.8 2100 8.50 83.02200 6.30 62.2 2200 7.90 77.72300 6.20 61.1 2300 7.40 72.92400 6.20 60.6 2400 7.00 68.62500 6.10 60.0 2500 6.60 64.4
2600 6.30 61.9 2600 7.30 71.42700 6.00 59.3 2700 7.30 71.12800 5.90 57.5 2800 7.20 70.82900 5.70 55.7 2900 7.20 70.43000 5.50 54.3 3000 6.80 67.13100 5.40 52.9 3100 6.40 63.03200 5.20 51.4 3200 6.00 58.93300 5.10 49.8 3300 5.60 54.83400 4.70 46.4 3400 5.40 52.53500 4.40 42.9 3500 5.10 50.2
3600 4.90 47.93700 4.70 46.03800 4.50 44.23900 4.30 42.34000 4.10 40.44100 3.90 38.54200 3.70 36.64300 3.50 34.8 4300 4.50 44.64400 3.40 32.9 4400 4.50 44.64500 3.20 31.1 4500 4.50 44.64600 3.00 29.3 4600 4.50 43.84700 2.80 27.4 4700 4.40 43.04800 2.61 25.6 4800 4.30 42.1
4900 4.20 41.25000 4.10 40.35100 4.00 38.85200 3.70 36.15300 3.40 33.85400 3.30 31.95500 3.00 29.95600 2.90 28.45700 2.70 26.95800 2.60 25.55900 2.50 24.36000 2.40 23.16100 2.20 22.06200 2.10 20.96250 2.10 20.4
MP 250 (15.6kg) MP 350 (19.7kg) MP 480 (25.00kg) MP 625 (34.8kg)
Cassaform Multiprops are very similar to the Slabprops in that they too are constructed of aluminium. They are slightly heavier in physical unit weight and their respective load capacities slightly less than the Slabprop at the same height. These props are well known and accepted in the construction industry and have been used for many years on building sites in different applications. They provide a simple, quick and easy solution to temporary propping where ever it is needed.
LOAD CHART
100mm
87mm
40mmø 14mmø
150mm
150mm
MULTI PROPS
PROPPING
www.cassaform.com.au P5
mm t kN mm t kN mm t kN2020 7.80 77.50 2020 7.80 77.502100 6.80 67.50 2100 7.40 73.902200 5.80 57.60 2200 7.10 70.302300 5.00 49.60 2300 6.70 66.802400 4.80 47.60 2400 6.30 63.20 2400 6.80 67.702500 4.60 45.60 2500 6.00 59.60 2500 6.60 65.702600 4.40 43.60 2600 5.60 56.00 2600 6.40 63.70
2700 5.30 52.50 2700 6.20 61.702800 5.00 49.60 2800 6.00 59.702900 4.90 48.90 2900 5.80 57.603000 4.80 48.10 3000 5.60 55.603100 4.80 47.40 3100 5.40 53.603200 4.70 46.60 3200 5.20 51.603300 4.60 45.90 3300 5.10 50.503400 4.50 45.10 3400 5.00 49.503500 4.50 44.40 3500 4.90 48.403600 4.40 43.60 3600 4.70 47.30
3700 4.60 46.203800 4.50 45.203900 4.40 44.104000 4.30 43.00
2020 - 2650 (15.5kg) 2020 - 3620 (19.6kg) 2400 - 4000 (21.1kg)
The Slabprop is an aluminium light weight prop which is both sturdy and has exceptionalThe high load capacity makes it’s suitable for most re-shoring and formwork applicationsSlabprop comes in four different sizes and ranges in capacity from 43.0 kN to 77.5 kN de
LOAD CHART
13mmø
150mm
150mm
134mm
134mm
SLAB PROPS
PROPPING
www.cassafoP4
PROPPIN
www.caP4P10
SUPER P30T PROP - LOAD CHART
Wor
king
Loa
d Li
mit
(kN
)
40035030025020015010050
0 1 2 3 4 5 6 7 8 9 10Prop height (m, Effective Length)
TRANSFER FIXING PLATES
RACKING HEADS
NEEDLE BEAM FIXING CLAMP
30°
IT
CLIENT
PROJECT
CTITLE
O
BYREV CHECKED DATEDESCRIPTION
T
85 Cherry Lane, Laverton North VIC 3026Telephone: 1300 745 674
Web:www.cassaform.com.auFacsimile: +613 9368 9499
6 ISSUED FOR COORDINATION ONLY JC TM 28/05/18
30°
CLIENT
PROJECT
TITLE
BYREV CHECKED DATEDESCRIPTION
85 Cherry Lane, Laverton North VIC 3026Telephone: 1300 745 674
Web:www.cassaform.com.auFacsimile: +613 9368 9499
6 ISSUED FOR COORDINATION ONLY JC TM 28/05/18
30°
CLIENT
PROJECT
TITLE
BYREV CHECKED DATEDESCRIPTION
85 Cherry Lane, Laverton North VIC 3026Telephone: 1300 745 674
Web:www.cassaform.com.auFacsimile: +613 9368 9499
6 ISSUED FOR COORDINATION ONLY JC TM 28/05/18
IT MUST NOT BE USED, COPIED, REPRODUCED
CHECKED
DATECLIENT
PROJECT
JOB No.
CASSAFORM PTY LTD.TITLE
DRAWN
SCALE
OR DISCLOSED WITHOUT WRITTEN PERMISSION
DRG No. REVISION
BY DATE
THIS DRAWING IS RESERVED PROPERTY OF
ton North VIC 3026674
com.au 9499
TM 28/05/18
g pictures of components
Needle beam fixing clamps,
Racking heads
Please add the following pictures of components
Needle beam fixing clamps,
SUPER 30 HEIGHT/COMPONENT CHARTProp Height
Required (metres)
Total Weight
kg
Super 30 Jack (400-610mm)
Number / Size of Sections Required125mm 250mm 500mm 1000mm 2000mm
25 kg 8 kg 11 kg 17 kg 30 kg 55 kg0.400 - 0.610 25 10.525 - 0.735 33 1 10.650 - 0.860 33 1 10.775 - 0.985 44 1 1 10.900 - 1.110 42 1 11.025 - 1.235 50 1 1 11.150 - 1.360 53 1 1 11.275 - 1.485 61 1 1 1 11.400 - 1.610 55 1 11.525 - 1.735 63 1 1 11.650 - 1.860 66 1 1 11.775 - 1.985 74 1 1 1 11.900 - 2.110 72 1 1 12.025 - 2.235 80 1 1 1 12.150 - 2.360 83 1 1 1 12.275 - 2.485 91 1 1 1 1 12.400 - 2.610 80 1 12.525 - 2.735 88 1 1 12.650 - 2.860 91 1 1 12.775 - 2.985 99 1 1 1 12.900 - 3.110 97 1 1 13.025 - 3.235 105 1 1 1 13.150 - 3.360 108 1 1 1 13.275 - 3.485 116 1 1 1 1 13.400 - 3.610 110 1 1 13.525 - 3.735 118 1 1 1 13.650 - 3.860 121 1 1 1 13.775 - 3.985 129 1 1 1 1 13.900 - 4.110 127 1 1 1 14.025 - 4.235 135 1 1 1 1 14.150 - 4.360 138 1 1 1 1 14.275 - 4.485 146 1 1 1 1 1 14.400 - 4.610 135 1 24.550 - 4.760 143 1 1 24.650 - 4.860 146 1 1 24.775 - 4.985 154 1 1 1 24.900 - 5.110 152 1 1 25.025 - 5.235 160 1 1 1 25.150 - 5.360 163 1 1 1 25.275 - 5.485 171 1 1 1 1 25.400 - 5.610 165 1 1 25.524 - 5.735 173 1 1 1 25.775 - 5.985 184 1 1 1 1 25.900 - 6.110 182 1 1 1 26.025 - 6.235 190 1 1 1 1 26.150 - 6.350 193 1 1 1 1 26.275 - 6.485 201 1 1 1 1 1 26.400 - 6.610 190 1 36.525 - 6.735 198 1 1 36.650 - 6.860 201 1 1 36.775 - 6.985 209 1 1 1 36.900 - 7.110 207 1 1 37.025 - 7.235 215 1 1 1 37.150 - 7.360 218 1 1 1 37.275 - 7.485 226 1 1 1 1 37.400 - 7.610 220 1 1 37.525 - 7.735 228 1 1 1 37.650 - 7.860 231 1 1 1 37.775 - 7.985 239 1 1 1 1 37.900 - 8.110 237 1 1 1 38.025 - 8.235 245 1 1 1 1 38.150 - 8.360 248 1 1 1 1 38.275 - 8485 256 1 1 1 1 1 38.525 - 8.735 253 1 1 48.650 - 8.860 256 1 1 48.775 - 8.985 264 1 1 1 48.900 - 9.110 262 1 1 49.025 - 9.235 270 1 1 1 4
mm t kN mm t kN mm t kN mm t kN2020 7.80 77.50 2020 7.80 77.502100 6.80 67.50 2100 7.40 73.902200 5.80 57.60 2200 7.10 70.302300 5.00 49.60 2300 6.70 66.802400 4.80 47.60 2400 6.30 63.20 2400 6.80 67.702500 4.60 45.60 2500 6.00 59.60 2500 6.60 65.702600 4.40 43.60 2600 5.60 56.00 2600 6.40 63.70
2700 5.30 52.50 2700 6.20 61.702800 5.00 49.60 2800 6.00 59.702900 4.90 48.90 2900 5.80 57.603000 4.80 48.10 3000 5.60 55.603100 4.80 47.40 3100 5.40 53.603200 4.70 46.60 3200 5.20 51.603300 4.60 45.90 3300 5.10 50.503400 4.50 45.10 3400 5.00 49.503500 4.50 44.40 3500 4.90 48.403600 4.40 43.60 3600 4.70 47.30 3600 6.80 67.70
3700 4.60 46.20 3700 6.60 65.703800 4.50 45.20 3800 6.40 63.703900 4.40 44.10 3900 6.20 61.704000 4.30 43.00 4000 6.00 59.70
4100 5.80 57.604200 5.60 55.604300 5.40 53.604400 5.20 51.604500 5.10 50.504600 5.00 49.504700 4.90 48.404800 4.70 47.304900 4.60 46.205000 4.50 45.205100 4.40 44.105200 4.30 43.00
2020 - 2650 (15.5kg) 2020 - 3620 (19.6kg) 2400 - 4000 (21.1kg) 3600 - 5200 (25.8kg)
The Slabprop is an aluminium light weight prop which is both sturdy and has exceptional safety characteristics. The high load capacity makes it’s suitable for most re-shoring and formwork applications and casting of slabs. The Slabprop comes in four different sizes and ranges in capacity from 43.0 kN to 77.5 kN depending on the extended
LOAD CHART
13mmø
150mm
150mm
134mm
134mm
SLAB PROPS
PROPPING
www.cassaform.com.auP4
PROPPING
www.cassaform.com.aP4
mm t kN mm t kN mm t kN mm t kN2020 7.80 77.50 2020 7.80 77.502100 6.80 67.50 2100 7.40 73.902200 5.80 57.60 2200 7.10 70.302300 5.00 49.60 2300 6.70 66.802400 4.80 47.60 2400 6.30 63.20 2400 6.80 67.702500 4.60 45.60 2500 6.00 59.60 2500 6.60 65.702600 4.40 43.60 2600 5.60 56.00 2600 6.40 63.70
2700 5.30 52.50 2700 6.20 61.702800 5.00 49.60 2800 6.00 59.702900 4.90 48.90 2900 5.80 57.603000 4.80 48.10 3000 5.60 55.603100 4.80 47.40 3100 5.40 53.603200 4.70 46.60 3200 5.20 51.603300 4.60 45.90 3300 5.10 50.503400 4.50 45.10 3400 5.00 49.503500 4.50 44.40 3500 4.90 48.403600 4.40 43.60 3600 4.70 47.30 3600 6.80 67.70
3700 4.60 46.20 3700 6.60 65.703800 4.50 45.20 3800 6.40 63.703900 4.40 44.10 3900 6.20 61.704000 4.30 43.00 4000 6.00 59.70
4100 5.80 57.604200 5.60 55.604300 5.40 53.604400 5.20 51.604500 5.10 50.504600 5.00 49.504700 4.90 48.404800 4.70 47.304900 4.60 46.205000 4.50 45.205100 4.40 44.105200 4.30 43.00
2020 - 2650 (15.5kg) 2020 - 3620 (19.6kg) 2400 - 4000 (21.1kg) 3600 - 5200 (25.8kg)
The Slabprop is an aluminium light weight prop which is both sturdy and has exceptional safety characteristics. The high load capacity makes it’s suitable for most re-shoring and formwork applications and casting of slabs. The Slabprop comes in four different sizes and ranges in capacity from 43.0 kN to 77.5 kN depending on the extended
LOAD CHART
13mmø
150mm
150mm
134mm
134mm
SLAB PROPS
PROPPING
www.cassaform.com.auP4
PROPPING
www.cassaform.com.aP4
mm t kN mm t kN mm t kN mm t kN2020 7.80 77.50 2020 7.80 77.502100 6.80 67.50 2100 7.40 73.902200 5.80 57.60 2200 7.10 70.302300 5.00 49.60 2300 6.70 66.802400 4.80 47.60 2400 6.30 63.20 2400 6.80 67.702500 4.60 45.60 2500 6.00 59.60 2500 6.60 65.702600 4.40 43.60 2600 5.60 56.00 2600 6.40 63.70
2700 5.30 52.50 2700 6.20 61.702800 5.00 49.60 2800 6.00 59.702900 4.90 48.90 2900 5.80 57.603000 4.80 48.10 3000 5.60 55.603100 4.80 47.40 3100 5.40 53.603200 4.70 46.60 3200 5.20 51.603300 4.60 45.90 3300 5.10 50.503400 4.50 45.10 3400 5.00 49.503500 4.50 44.40 3500 4.90 48.403600 4.40 43.60 3600 4.70 47.30 3600 6.80 67.70
3700 4.60 46.20 3700 6.60 65.703800 4.50 45.20 3800 6.40 63.703900 4.40 44.10 3900 6.20 61.704000 4.30 43.00 4000 6.00 59.70
4100 5.80 57.604200 5.60 55.604300 5.40 53.604400 5.20 51.604500 5.10 50.504600 5.00 49.504700 4.90 48.404800 4.70 47.304900 4.60 46.205000 4.50 45.205100 4.40 44.105200 4.30 43.00
2020 - 2650 (15.5kg) 2020 - 3620 (19.6kg) 2400 - 4000 (21.1kg) 3600 - 5200 (25.8kg)
bprop is an aluminium light weight prop which is both sturdy and has exceptional safety characteristics. gh load capacity makes it’s suitable for most re-shoring and formwork applications and casting of slabs. The op comes in four different sizes and ranges in capacity from 43.0 kN to 77.5 kN depending on the extended
LOAD CHART
13mmø
150mm
150mm
134mm
134mm
B PROPS
PROPPING
www.cassaform.com.auP4
PROPPING
www.cassaform.com.auP4P11
PROPPING
ww.cassaform.com.au P7
The popularity of the Super100 prop comes down to the fact that it provides you with a massive 100 tonne load capacity. It is a heavy duty propping system designed for the extra high loads. It’s strength comes from the rigid and robust steel design and it versatility makes it perfectly suited to heavy duty back propping requirements to support mobile cranes on suspended slabs, temporary bridges and heavy duty falsework towers. The super 100 system is fully adjustable between 410mm and 12000mm unsupported.
m t kN1 101.00 1000.02 101.00 1000.03 101.00 1000.04 101.00 1000.05 101.00 1000.06 98.60 967.07 91.50 898.08 89.30 823.09 75.60 742.010 66.80 656.011 57.40 563.012 48.20 473.0
Kg49.029.644.965.6114.6163.5
Section HeightJack 410 - 620 mm
270 mm450 mm900 mm1800 mm2700 mm
SPECIFICATIONS LOAD CHART
410mmmin
max620mm
300mm
280mm
280mm
180mm
22mmø 55mmø
300mm
300mm
100mm
SUPER 100 PROPS
1800mm
900mm
450mm
270mm
90mm
2700mm
PROPPING
www.cassaform.com.au P7ww.cassaform.com.au P7
The popularity of the Super100 prop comes down to the fact that it provides you with a massive 100 tonne load capacity. It is a heavy duty propping system designed for the extra high loads. It’s strength comes from the rigid and robust steel design and it versatility makes it perfectly suited to heavy duty back propping requirements to support mobile cranes on suspended slabs, temporary bridges and heavy duty falsework towers. The super 100 system is fully adjustable between 410mm and 12000mm unsupported.
m t kN1 101.00 1000.02 101.00 1000.03 101.00 1000.04 101.00 1000.05 101.00 1000.06 98.60 967.07 91.50 898.08 89.30 823.09 75.60 742.010 66.80 656.011 57.40 563.012 48.20 473.0
Kg49.029.644.965.6114.6163.5
Section HeightJack 410 - 620 mm
270 mm450 mm900 mm1800 mm2700 mm
SPECIFICATIONS LOAD CHART
410mmmin
max620mm
300mm
280mm
280mm
180mm
22mmø 55mmø
300mm
300mm
100mm
SUPER 100 PROPS
1800mm
900mm
450mm
270mm
90mm
2700mm
www.cassaform.com.au P7
www.cassaform.com.auP37
900mm
450mm
270mm
90mm
Working Loads
1000974.16
886.51
789.27
682.46
565.91
454.82
375.88
315.85
1000977
920
851
773
689
601
511
420
338
279235
822783
733
673
607
537
467
396
325
262216
182
688655
611
561
505
447
388
329
271
218180
151
620590
551506
456
403
350
298
245197
163137
0
200
400
600
800
1000
1200
1 2 3 4 5 6 7 8 9 1 0 1 1 1 2
ALLO
W. C
OM
PRES
SIVE
WO
RKIN
G LO
AD (K
N)
EFFECTIVE LENGTH (M)
e = 0 mm e = 10 mm e = 25 mm e = 40 mm e = 50 mm
114.6163.5
1800 mm2700 mm
PROPPING
The popularity of the Super100 prop comes down to the fact that it provides you with a massivecapacity. It is a heavy duty propping system designed for the extra high loads. It’s strength comerobust steel design and it versatility makes it perfectly suited to heavy duty back propping requimobile cranes on suspended slabs, temporary bridges and heavy duty falsework towers. The supfully adjustable between 410mm and 12000mm unsupported.
m123456789101112
Kg49.029.644.965.6114.6163.5
Section HeightJack 410 - 620 mm
270 mm450 mm900 mm1800 mm2700 mm
SPECIFICATIONS L
max620mm
300mm
280mm
22mmø
SUPER 100 PROPS
1800mm
900mm
450mm
270mm
90mm
2700mm
PROPPING
PROPPING
The popularity of the Super100 prop comes down to the fact that it provides you with a capacity. It is a heavy duty propping system designed for the extra high loads. It’s strengrobust steel design and it versatility makes it perfectly suited to heavy duty back proppimobile cranes on suspended slabs, temporary bridges and heavy duty falsework towers. fully adjustable between 410mm and 12000mm unsupported.
Kg49.029.644.965.6114.6163.5
Section HeightJack 410 - 620 mm
270 mm450 mm900 mm1800 mm2700 mm
SPECIFICATIONS
620mm
300mm
280mm
SUPER 100 PROPS
1800mm
900mm
450mm
270mm
90mm
2700mm
PROPPING
PROPPING
ww.cassaform.com.au P5
mm t kN mm t kN mm t kN mm t kN1450 7.50 73.31500 7.50 73.31600 7.50 73.31700 7.50 73.31800 7.30 71.71900 7.00 68.61950 6.80 67.0 1950 9.00 88.32000 6.70 65.4 2000 9.00 88.32100 6.50 63.8 2100 8.50 83.02200 6.30 62.2 2200 7.90 77.72300 6.20 61.1 2300 7.40 72.92400 6.20 60.6 2400 7.00 68.62500 6.10 60.0 2500 6.60 64.4
2600 6.30 61.9 2600 7.30 71.42700 6.00 59.3 2700 7.30 71.12800 5.90 57.5 2800 7.20 70.82900 5.70 55.7 2900 7.20 70.43000 5.50 54.3 3000 6.80 67.13100 5.40 52.9 3100 6.40 63.03200 5.20 51.4 3200 6.00 58.93300 5.10 49.8 3300 5.60 54.83400 4.70 46.4 3400 5.40 52.53500 4.40 42.9 3500 5.10 50.2
3600 4.90 47.93700 4.70 46.03800 4.50 44.23900 4.30 42.34000 4.10 40.44100 3.90 38.54200 3.70 36.64300 3.50 34.8 4300 4.50 44.64400 3.40 32.9 4400 4.50 44.64500 3.20 31.1 4500 4.50 44.64600 3.00 29.3 4600 4.50 43.84700 2.80 27.4 4700 4.40 43.04800 2.61 25.6 4800 4.30 42.1
4900 4.20 41.25000 4.10 40.35100 4.00 38.85200 3.70 36.15300 3.40 33.85400 3.30 31.95500 3.00 29.95600 2.90 28.45700 2.70 26.95800 2.60 25.55900 2.50 24.36000 2.40 23.16100 2.20 22.06200 2.10 20.96250 2.10 20.4
MP 250 (15.6kg) MP 350 (19.7kg) MP 480 (25.00kg) MP 625 (34.8kg)
Cassaform Multiprops are very similar to the Slabprops in that they too are constructed of aluminium. They are slightly heavier in physical unit weight and their respective load capacities slightly less than the Slabprop at the same height. These props are well known and accepted in the construction industry and have been used for many years on building sites in different applications. They provide a simple, quick and easy solution to temporary propping where ever it is needed.
LOAD CHART
100mm
87mm
40mmø 14mmø
150mm
150mm
MULTI PROPS
PROPPING
www.cassaform.com.au P5
PROPPING
ww.cassaform.com.au P5
mm t kN mm t kN mm t kN mm t kN1450 7.50 73.31500 7.50 73.31600 7.50 73.31700 7.50 73.31800 7.30 71.71900 7.00 68.61950 6.80 67.0 1950 9.00 88.32000 6.70 65.4 2000 9.00 88.32100 6.50 63.8 2100 8.50 83.02200 6.30 62.2 2200 7.90 77.72300 6.20 61.1 2300 7.40 72.92400 6.20 60.6 2400 7.00 68.62500 6.10 60.0 2500 6.60 64.4
2600 6.30 61.9 2600 7.30 71.42700 6.00 59.3 2700 7.30 71.12800 5.90 57.5 2800 7.20 70.82900 5.70 55.7 2900 7.20 70.43000 5.50 54.3 3000 6.80 67.13100 5.40 52.9 3100 6.40 63.03200 5.20 51.4 3200 6.00 58.93300 5.10 49.8 3300 5.60 54.83400 4.70 46.4 3400 5.40 52.53500 4.40 42.9 3500 5.10 50.2
3600 4.90 47.93700 4.70 46.03800 4.50 44.23900 4.30 42.34000 4.10 40.44100 3.90 38.54200 3.70 36.64300 3.50 34.8 4300 4.50 44.64400 3.40 32.9 4400 4.50 44.64500 3.20 31.1 4500 4.50 44.64600 3.00 29.3 4600 4.50 43.84700 2.80 27.4 4700 4.40 43.04800 2.61 25.6 4800 4.30 42.1
4900 4.20 41.25000 4.10 40.35100 4.00 38.85200 3.70 36.15300 3.40 33.85400 3.30 31.95500 3.00 29.95600 2.90 28.45700 2.70 26.95800 2.60 25.55900 2.50 24.36000 2.40 23.16100 2.20 22.06200 2.10 20.96250 2.10 20.4
MP 250 (15.6kg) MP 350 (19.7kg) MP 480 (25.00kg) MP 625 (34.8kg)
Cassaform Multiprops are very similar to the Slabprops in that they too are constructed of aluminium. They are slightly heavier in physical unit weight and their respective load capacities slightly less than the Slabprop at the same height. These props are well known and accepted in the construction industry and have been used for many years on building sites in different applications. They provide a simple, quick and easy solution to temporary propping where ever it is needed.
LOAD CHART
100mm
87mm
40mmø 14mmø
150mm
150mm
MULTI PROPS
PROPPING
www.cassaform.com.au P5
mm t kN mm t kN mm t kN2020 7.80 77.50 2020 7.80 77.502100 6.80 67.50 2100 7.40 73.902200 5.80 57.60 2200 7.10 70.302300 5.00 49.60 2300 6.70 66.802400 4.80 47.60 2400 6.30 63.20 2400 6.80 67.702500 4.60 45.60 2500 6.00 59.60 2500 6.60 65.702600 4.40 43.60 2600 5.60 56.00 2600 6.40 63.70
2700 5.30 52.50 2700 6.20 61.702800 5.00 49.60 2800 6.00 59.702900 4.90 48.90 2900 5.80 57.603000 4.80 48.10 3000 5.60 55.603100 4.80 47.40 3100 5.40 53.603200 4.70 46.60 3200 5.20 51.603300 4.60 45.90 3300 5.10 50.503400 4.50 45.10 3400 5.00 49.503500 4.50 44.40 3500 4.90 48.403600 4.40 43.60 3600 4.70 47.30
3700 4.60 46.203800 4.50 45.203900 4.40 44.104000 4.30 43.00
2020 - 2650 (15.5kg) 2020 - 3620 (19.6kg) 2400 - 4000 (21.1kg)
The Slabprop is an aluminium light weight prop which is both sturdy and has exceptionalThe high load capacity makes it’s suitable for most re-shoring and formwork applicationsSlabprop comes in four different sizes and ranges in capacity from 43.0 kN to 77.5 kN de
LOAD CHART
13mmø
150mm
150mm
134mm
134mm
SLAB PROPS
PROPPING
www.cassafoP4
PROPPIN
www.caP4P12
SUPER 100 COMPONENTS
Super 100 Height
Required (metres)
Total Weight
kg
Number / Size of Sections RequiredSuper 100 Jack 410-610mm
90mm Section
270mm Section
450mm Section
900mm Section
1800mm Section
2700mm Section
49 kg 21.1 kg 29.6 kg 44.9 kg 65.6 kg 114.6 kg 163.5 kg
0.410 - 0.620 49.0 1
0.500 - 0.710 70.1 1 1
0.680 - 0.890 78.6 1 1
0.860 - 1.070 93.9 1 1
0.950 - 1.160 115.0 1 1 1
1.130 - 1.340 123.5 1 1 1
1.310 - 1.520 114.6 1 1
1.400 - 1.610 135.7 1 1 1
1.580 - 1.790 144.2 1 1 1
1.760 - 1.970 159.5 1 1 1
1.850 - 2.060 180.6 1 1 1 1
2.030 - 2.240 189.1 1 1 1 1
2.210 - 2.420 163.6 1 1
2.300 - 2.510 184.7 1 1 1
2.480 - 2.690 193.2 1 1 1
2.660 - 2.870 208.5 1 1 1
2.750 - 2.960 229.6 1 1 1 1
2.930 - 3.140 238.1 1 1 1 1
3.110 - 3.320 212.5 1 1
3.200 - 3.410 233.6 1 1 1
3.380 - 3.590 242.1 1 1 1
3.560 - 3.770 257.4 1 1 1
3.650 - 3.860 278.5 1 1 1 1
3.830 - 4.040 287.0 1 1 1 1
4.010 - 4.220 278.1 1 1 1
4.100 - 4.310 299.2 1 1 1 1
4.280 - 4.490 307.7 1 1 1 1
4.460 - 4.670 323.0 1 1 1 1
4.550 - 4.760 344.1 1 1 1 1 1
4.730 - 4.940 352.6 1 1 1 1 1
4.910 - 5.120 327.1 1 1 1
5.000 - 5.210 348.2 1 1 1 1
5.180 - 5.390 356.7 1 1 1 1
5.360 - 5.570 372.0 1 1 1 1
5.450 - 5.660 393.1 1 1 1 1 1
5.630 - 5.840 401.6 1 1 1 1 1
5.810 - 6.020 376.0 1 2
5.900 - 6.110 397.1 1 1 2
6.080 - 6.290 405.6 1 1 2
6.260 - 6.470 420.9 1 1 2
6.350 - 6.560 442.0 1 1 1 2
6.530 - 6.740 450.5 1 1 1 2
6.710 - 6.920 441.6 1 1 2
6.800 - 7.010 462.7 1 1 1 2
6.980 - 7.190 471.2 1 1 1 2
7.160 - 7.370 486.5 1 1 1 2
7.250 - 7.460 507.6 1 1 1 1 2
7.430 - 7.640 516.1 1 1 1 1 2
7.610 - 7.820 490.6 1 1 2
7.700 - 7.910 511.7 1 1 1 2
7.880 - 8.090 520.2 1 1 1 2
www.cassaform.com.au
410mmmin
max620mm
www.cassaform.com.au
www.cassaform.com.au P7
fully adjustable between 410mm and 12000mm unsupported.
m
111
Kg49.029.644.965.6114.6163.5
Section HeightJack 410 - 620 mm
270 mm450 mm900 mm1800 mm2700 mm
SPECIFICATIONS
410mmmin
max620mm
300mm
280mm
280mm
180mm
22mm
100m
1800mm
900mm
450mm
270mm
90mm
2700mm
www.cassaform.com.au P7
PROPPING
ww.cassaform.com.au P7
The popularity of the Super100 prop comes down to the fact that it provides you with a massive 100 tonne load capacity. It is a heavy duty propping system designed for the extra high loads. It’s strength comes from the rigid and robust steel design and it versatility makes it perfectly suited to heavy duty back propping requirements to support mobile cranes on suspended slabs, temporary bridges and heavy duty falsework towers. The super 100 system is fully adjustable between 410mm and 12000mm unsupported.
m t kN1 101.00 1000.02 101.00 1000.03 101.00 1000.04 101.00 1000.05 101.00 1000.06 98.60 967.07 91.50 898.08 89.30 823.09 75.60 742.010 66.80 656.011 57.40 563.012 48.20 473.0
Kg49.029.644.965.6114.6163.5
Section HeightJack 410 - 620 mm
270 mm450 mm900 mm1800 mm2700 mm
SPECIFICATIONS LOAD CHART
410mmmin
max620mm
300mm
280mm
280mm
180mm
22mmø 55mmø
300mm
300mm
100mm
SUPER 100 PROPS
1800mm
900mm
450mm
270mm
90mm
2700mm
PROPPING
www.cassaform.com.au P7
PROPPING
ww.cassaform.com.au P7
The popularity of the Super100 prop comes down to the fact that it provides you with a massive 100 tonne load capacity. It is a heavy duty propping system designed for the extra high loads. It’s strength comes from the rigid and robust steel design and it versatility makes it perfectly suited to heavy duty back propping requirements to support mobile cranes on suspended slabs, temporary bridges and heavy duty falsework towers. The super 100 system is fully adjustable between 410mm and 12000mm unsupported.
m t kN1 101.00 1000.02 101.00 1000.03 101.00 1000.04 101.00 1000.05 101.00 1000.06 98.60 967.07 91.50 898.08 89.30 823.09 75.60 742.010 66.80 656.011 57.40 563.012 48.20 473.0
Kg49.029.644.965.6114.6163.5
Section HeightJack 410 - 620 mm
270 mm450 mm900 mm1800 mm2700 mm
SPECIFICATIONS LOAD CHART
410mmmin
max620mm
300mm
280mm
280mm
180mm
22mmø 55mmø
300mm
300mm
100mm
SUPER 100 PROPS
1800mm
900mm
450mm
270mm
90mm
2700mm
PROPPING
www.cassaform.com.au P7
www.cassaform.com.au
410mmmin
max620mm
www.cassaform.com.au
mm t kN mm t kN mm t kN mm t kN2020 7.80 77.50 2020 7.80 77.502100 6.80 67.50 2100 7.40 73.902200 5.80 57.60 2200 7.10 70.302300 5.00 49.60 2300 6.70 66.802400 4.80 47.60 2400 6.30 63.20 2400 6.80 67.702500 4.60 45.60 2500 6.00 59.60 2500 6.60 65.702600 4.40 43.60 2600 5.60 56.00 2600 6.40 63.70
2700 5.30 52.50 2700 6.20 61.702800 5.00 49.60 2800 6.00 59.702900 4.90 48.90 2900 5.80 57.603000 4.80 48.10 3000 5.60 55.603100 4.80 47.40 3100 5.40 53.603200 4.70 46.60 3200 5.20 51.603300 4.60 45.90 3300 5.10 50.503400 4.50 45.10 3400 5.00 49.503500 4.50 44.40 3500 4.90 48.403600 4.40 43.60 3600 4.70 47.30 3600 6.80 67.70
3700 4.60 46.20 3700 6.60 65.703800 4.50 45.20 3800 6.40 63.703900 4.40 44.10 3900 6.20 61.704000 4.30 43.00 4000 6.00 59.70
4100 5.80 57.604200 5.60 55.604300 5.40 53.604400 5.20 51.604500 5.10 50.504600 5.00 49.504700 4.90 48.404800 4.70 47.304900 4.60 46.205000 4.50 45.205100 4.40 44.105200 4.30 43.00
2020 - 2650 (15.5kg) 2020 - 3620 (19.6kg) 2400 - 4000 (21.1kg) 3600 - 5200 (25.8kg)
The Slabprop is an aluminium light weight prop which is both sturdy and has exceptional safety characteristics. The high load capacity makes it’s suitable for most re-shoring and formwork applications and casting of slabs. The Slabprop comes in four different sizes and ranges in capacity from 43.0 kN to 77.5 kN depending on the extended
LOAD CHART
13mmø
150mm
150mm
134mm
134mm
SLAB PROPS
PROPPING
www.cassaform.com.auP4
PROPPING
www.cassaform.com.aP4
mm t kN mm t kN mm t kN mm t kN2020 7.80 77.50 2020 7.80 77.502100 6.80 67.50 2100 7.40 73.902200 5.80 57.60 2200 7.10 70.302300 5.00 49.60 2300 6.70 66.802400 4.80 47.60 2400 6.30 63.20 2400 6.80 67.702500 4.60 45.60 2500 6.00 59.60 2500 6.60 65.702600 4.40 43.60 2600 5.60 56.00 2600 6.40 63.70
2700 5.30 52.50 2700 6.20 61.702800 5.00 49.60 2800 6.00 59.702900 4.90 48.90 2900 5.80 57.603000 4.80 48.10 3000 5.60 55.603100 4.80 47.40 3100 5.40 53.603200 4.70 46.60 3200 5.20 51.603300 4.60 45.90 3300 5.10 50.503400 4.50 45.10 3400 5.00 49.503500 4.50 44.40 3500 4.90 48.403600 4.40 43.60 3600 4.70 47.30 3600 6.80 67.70
3700 4.60 46.20 3700 6.60 65.703800 4.50 45.20 3800 6.40 63.703900 4.40 44.10 3900 6.20 61.704000 4.30 43.00 4000 6.00 59.70
4100 5.80 57.604200 5.60 55.604300 5.40 53.604400 5.20 51.604500 5.10 50.504600 5.00 49.504700 4.90 48.404800 4.70 47.304900 4.60 46.205000 4.50 45.205100 4.40 44.105200 4.30 43.00
2020 - 2650 (15.5kg) 2020 - 3620 (19.6kg) 2400 - 4000 (21.1kg) 3600 - 5200 (25.8kg)
bprop is an aluminium light weight prop which is both sturdy and has exceptional safety characteristics. gh load capacity makes it’s suitable for most re-shoring and formwork applications and casting of slabs. The op comes in four different sizes and ranges in capacity from 43.0 kN to 77.5 kN depending on the extended
LOAD CHART
13mmø
150mm
150mm
134mm
134mm
B PROPS
PROPPING
www.cassaform.com.auP4
PROPPING
www.cassaform.com.auP4P13
mm t kN mm t kN mm t kN mm t kN2020 7.80 77.50 2020 7.80 77.502100 6.80 67.50 2100 7.40 73.902200 5.80 57.60 2200 7.10 70.302300 5.00 49.60 2300 6.70 66.802400 4.80 47.60 2400 6.30 63.20 2400 6.80 67.702500 4.60 45.60 2500 6.00 59.60 2500 6.60 65.702600 4.40 43.60 2600 5.60 56.00 2600 6.40 63.70
2700 5.30 52.50 2700 6.20 61.702800 5.00 49.60 2800 6.00 59.702900 4.90 48.90 2900 5.80 57.603000 4.80 48.10 3000 5.60 55.603100 4.80 47.40 3100 5.40 53.603200 4.70 46.60 3200 5.20 51.603300 4.60 45.90 3300 5.10 50.503400 4.50 45.10 3400 5.00 49.503500 4.50 44.40 3500 4.90 48.403600 4.40 43.60 3600 4.70 47.30 3600 6.80 67.70
3700 4.60 46.20 3700 6.60 65.703800 4.50 45.20 3800 6.40 63.703900 4.40 44.10 3900 6.20 61.704000 4.30 43.00 4000 6.00 59.70
4100 5.80 57.604200 5.60 55.604300 5.40 53.604400 5.20 51.604500 5.10 50.504600 5.00 49.504700 4.90 48.404800 4.70 47.304900 4.60 46.205000 4.50 45.205100 4.40 44.105200 4.30 43.00
2020 - 2650 (15.5kg) 2020 - 3620 (19.6kg) 2400 - 4000 (21.1kg) 3600 - 5200 (25.8kg)
The Slabprop is an aluminium light weight prop which is both sturdy and has exceptional safety characteristics. The high load capacity makes it’s suitable for most re-shoring and formwork applications and casting of slabs. The Slabprop comes in four different sizes and ranges in capacity from 43.0 kN to 77.5 kN depending on the extended
LOAD CHART
13mmø
150mm
150mm
134mm
134mm
SLAB PROPS
PROPPING
www.cassaform.com.auP4
PROPPING
www.cassaform.com.aP4
PROPPING ACCESSORIESSWIVEL COUPLERSSwivel & Fixed Couplers are also available for when lateral bracing is required
STRONG BOYSStrong Boy is a robust steel prop head attachment designed to provide temporary support to masonry walls while lintels or beams are installed. No fasteners are required to hold the Strong Boy in place as it securely fits standard acrow props with a top or head plate of 150mm x 150mm.
Before using a Strong Boys always consult your Structural Engineer.
UNIVERSAL TRIPODSUniversal Tripods suit both the Euro Prop and Aluminium Prop ranges and are often used to stabilise or hold a prop in position until it becomes stable within a system or until it is braced.
CONNECTION FRAMESA variety of Connections Frames are available to suit the Euro Props and Aluminium Propping range.
Insert large bold bubble here
You can fill this application out online at
cassaform.applyeasy.com.au/credit
PROPPING
ww.cassaform.com.au P5
mm t kN mm t kN mm t kN mm t kN1450 7.50 73.31500 7.50 73.31600 7.50 73.31700 7.50 73.31800 7.30 71.71900 7.00 68.61950 6.80 67.0 1950 9.00 88.32000 6.70 65.4 2000 9.00 88.32100 6.50 63.8 2100 8.50 83.02200 6.30 62.2 2200 7.90 77.72300 6.20 61.1 2300 7.40 72.92400 6.20 60.6 2400 7.00 68.62500 6.10 60.0 2500 6.60 64.4
2600 6.30 61.9 2600 7.30 71.42700 6.00 59.3 2700 7.30 71.12800 5.90 57.5 2800 7.20 70.82900 5.70 55.7 2900 7.20 70.43000 5.50 54.3 3000 6.80 67.13100 5.40 52.9 3100 6.40 63.03200 5.20 51.4 3200 6.00 58.93300 5.10 49.8 3300 5.60 54.83400 4.70 46.4 3400 5.40 52.53500 4.40 42.9 3500 5.10 50.2
3600 4.90 47.93700 4.70 46.03800 4.50 44.23900 4.30 42.34000 4.10 40.44100 3.90 38.54200 3.70 36.64300 3.50 34.8 4300 4.50 44.64400 3.40 32.9 4400 4.50 44.64500 3.20 31.1 4500 4.50 44.64600 3.00 29.3 4600 4.50 43.84700 2.80 27.4 4700 4.40 43.04800 2.61 25.6 4800 4.30 42.1
4900 4.20 41.25000 4.10 40.35100 4.00 38.85200 3.70 36.15300 3.40 33.85400 3.30 31.95500 3.00 29.95600 2.90 28.45700 2.70 26.95800 2.60 25.55900 2.50 24.36000 2.40 23.16100 2.20 22.06200 2.10 20.96250 2.10 20.4
MP 250 (15.6kg) MP 350 (19.7kg) MP 480 (25.00kg) MP 625 (34.8kg)
Cassaform Multiprops are very similar to the Slabprops in that they too are constructed of aluminium. They are slightly heavier in physical unit weight and their respective load capacities slightly less than the Slabprop at the same height. These props are well known and accepted in the construction industry and have been used for many years on building sites in different applications. They provide a simple, quick and easy solution to temporary propping where ever it is needed.
LOAD CHART
100mm
87mm
40mmø 14mmø
150mm
150mm
MULTI PROPS
PROPPING
www.cassaform.com.au P5
PROPPING
ww.cassaform.com.au P5
mm t kN mm t kN mm t kN mm t kN1450 7.50 73.31500 7.50 73.31600 7.50 73.31700 7.50 73.31800 7.30 71.71900 7.00 68.61950 6.80 67.0 1950 9.00 88.32000 6.70 65.4 2000 9.00 88.32100 6.50 63.8 2100 8.50 83.02200 6.30 62.2 2200 7.90 77.72300 6.20 61.1 2300 7.40 72.92400 6.20 60.6 2400 7.00 68.62500 6.10 60.0 2500 6.60 64.4
2600 6.30 61.9 2600 7.30 71.42700 6.00 59.3 2700 7.30 71.12800 5.90 57.5 2800 7.20 70.82900 5.70 55.7 2900 7.20 70.43000 5.50 54.3 3000 6.80 67.13100 5.40 52.9 3100 6.40 63.03200 5.20 51.4 3200 6.00 58.93300 5.10 49.8 3300 5.60 54.83400 4.70 46.4 3400 5.40 52.53500 4.40 42.9 3500 5.10 50.2
3600 4.90 47.93700 4.70 46.03800 4.50 44.23900 4.30 42.34000 4.10 40.44100 3.90 38.54200 3.70 36.64300 3.50 34.8 4300 4.50 44.64400 3.40 32.9 4400 4.50 44.64500 3.20 31.1 4500 4.50 44.64600 3.00 29.3 4600 4.50 43.84700 2.80 27.4 4700 4.40 43.04800 2.61 25.6 4800 4.30 42.1
4900 4.20 41.25000 4.10 40.35100 4.00 38.85200 3.70 36.15300 3.40 33.85400 3.30 31.95500 3.00 29.95600 2.90 28.45700 2.70 26.95800 2.60 25.55900 2.50 24.36000 2.40 23.16100 2.20 22.06200 2.10 20.96250 2.10 20.4
MP 250 (15.6kg) MP 350 (19.7kg) MP 480 (25.00kg) MP 625 (34.8kg)
Cassaform Multiprops are very similar to the Slabprops in that they too are constructed of aluminium. They are slightly heavier in physical unit weight and their respective load capacities slightly less than the Slabprop at the same height. These props are well known and accepted in the construction industry and have been used for many years on building sites in different applications. They provide a simple, quick and easy solution to temporary propping where ever it is needed.
LOAD CHART
100mm
87mm
40mmø 14mmø
150mm
150mm
MULTI PROPS
PROPPING
www.cassaform.com.au P5
mm t kN mm t kN mm t kN2020 7.80 77.50 2020 7.80 77.502100 6.80 67.50 2100 7.40 73.902200 5.80 57.60 2200 7.10 70.302300 5.00 49.60 2300 6.70 66.802400 4.80 47.60 2400 6.30 63.20 2400 6.80 67.702500 4.60 45.60 2500 6.00 59.60 2500 6.60 65.702600 4.40 43.60 2600 5.60 56.00 2600 6.40 63.70
2700 5.30 52.50 2700 6.20 61.702800 5.00 49.60 2800 6.00 59.702900 4.90 48.90 2900 5.80 57.603000 4.80 48.10 3000 5.60 55.603100 4.80 47.40 3100 5.40 53.603200 4.70 46.60 3200 5.20 51.603300 4.60 45.90 3300 5.10 50.503400 4.50 45.10 3400 5.00 49.503500 4.50 44.40 3500 4.90 48.403600 4.40 43.60 3600 4.70 47.30
3700 4.60 46.203800 4.50 45.203900 4.40 44.104000 4.30 43.00
2020 - 2650 (15.5kg) 2020 - 3620 (19.6kg) 2400 - 4000 (21.1kg)
The Slabprop is an aluminium light weight prop which is both sturdy and has exceptionalThe high load capacity makes it’s suitable for most re-shoring and formwork applicationsSlabprop comes in four different sizes and ranges in capacity from 43.0 kN to 77.5 kN de
LOAD CHART
13mmø
150mm
150mm
134mm
134mm
SLAB PROPS
PROPPING
www.cassafoP4
PROPPIN
www.caP4P14
Insert large bold bubble here
You can fill this application out online at
cassaform.applyeasy.com.au/credit
You can fill out this application online at cassaform.applyeasy.com.au/credit
All CorrespondencePhone: 1300 745 674Email: [email protected]
mm t kN mm t kN mm t kN mm t kN2020 7.80 77.50 2020 7.80 77.502100 6.80 67.50 2100 7.40 73.902200 5.80 57.60 2200 7.10 70.302300 5.00 49.60 2300 6.70 66.802400 4.80 47.60 2400 6.30 63.20 2400 6.80 67.702500 4.60 45.60 2500 6.00 59.60 2500 6.60 65.702600 4.40 43.60 2600 5.60 56.00 2600 6.40 63.70
2700 5.30 52.50 2700 6.20 61.702800 5.00 49.60 2800 6.00 59.702900 4.90 48.90 2900 5.80 57.603000 4.80 48.10 3000 5.60 55.603100 4.80 47.40 3100 5.40 53.603200 4.70 46.60 3200 5.20 51.603300 4.60 45.90 3300 5.10 50.503400 4.50 45.10 3400 5.00 49.503500 4.50 44.40 3500 4.90 48.403600 4.40 43.60 3600 4.70 47.30 3600 6.80 67.70
3700 4.60 46.20 3700 6.60 65.703800 4.50 45.20 3800 6.40 63.703900 4.40 44.10 3900 6.20 61.704000 4.30 43.00 4000 6.00 59.70
4100 5.80 57.604200 5.60 55.604300 5.40 53.604400 5.20 51.604500 5.10 50.504600 5.00 49.504700 4.90 48.404800 4.70 47.304900 4.60 46.205000 4.50 45.205100 4.40 44.105200 4.30 43.00
2020 - 2650 (15.5kg) 2020 - 3620 (19.6kg) 2400 - 4000 (21.1kg) 3600 - 5200 (25.8kg)
The Slabprop is an aluminium light weight prop which is both sturdy and has exceptional safety characteristics. The high load capacity makes it’s suitable for most re-shoring and formwork applications and casting of slabs. The Slabprop comes in four different sizes and ranges in capacity from 43.0 kN to 77.5 kN depending on the extended
LOAD CHART
13mmø
150mm
150mm
134mm
134mm
SLAB PROPS
PROPPING
www.cassaform.com.auP4
PROPPING
www.cassaform.com.aP4
mm t kN mm t kN mm t kN mm t kN2020 7.80 77.50 2020 7.80 77.502100 6.80 67.50 2100 7.40 73.902200 5.80 57.60 2200 7.10 70.302300 5.00 49.60 2300 6.70 66.802400 4.80 47.60 2400 6.30 63.20 2400 6.80 67.702500 4.60 45.60 2500 6.00 59.60 2500 6.60 65.702600 4.40 43.60 2600 5.60 56.00 2600 6.40 63.70
2700 5.30 52.50 2700 6.20 61.702800 5.00 49.60 2800 6.00 59.702900 4.90 48.90 2900 5.80 57.603000 4.80 48.10 3000 5.60 55.603100 4.80 47.40 3100 5.40 53.603200 4.70 46.60 3200 5.20 51.603300 4.60 45.90 3300 5.10 50.503400 4.50 45.10 3400 5.00 49.503500 4.50 44.40 3500 4.90 48.403600 4.40 43.60 3600 4.70 47.30 3600 6.80 67.70
3700 4.60 46.20 3700 6.60 65.703800 4.50 45.20 3800 6.40 63.703900 4.40 44.10 3900 6.20 61.704000 4.30 43.00 4000 6.00 59.70
4100 5.80 57.604200 5.60 55.604300 5.40 53.604400 5.20 51.604500 5.10 50.504600 5.00 49.504700 4.90 48.404800 4.70 47.304900 4.60 46.205000 4.50 45.205100 4.40 44.105200 4.30 43.00
2020 - 2650 (15.5kg) 2020 - 3620 (19.6kg) 2400 - 4000 (21.1kg) 3600 - 5200 (25.8kg)
bprop is an aluminium light weight prop which is both sturdy and has exceptional safety characteristics. gh load capacity makes it’s suitable for most re-shoring and formwork applications and casting of slabs. The op comes in four different sizes and ranges in capacity from 43.0 kN to 77.5 kN depending on the extended
LOAD CHART
13mmø
150mm
150mm
134mm
134mm
B PROPS
PROPPING
www.cassaform.com.auP4
PROPPING
www.cassaform.com.auP4P15
mm t kN mm t kN mm t kN mm t kN2020 7.80 77.50 2020 7.80 77.502100 6.80 67.50 2100 7.40 73.902200 5.80 57.60 2200 7.10 70.302300 5.00 49.60 2300 6.70 66.802400 4.80 47.60 2400 6.30 63.20 2400 6.80 67.702500 4.60 45.60 2500 6.00 59.60 2500 6.60 65.702600 4.40 43.60 2600 5.60 56.00 2600 6.40 63.70
2700 5.30 52.50 2700 6.20 61.702800 5.00 49.60 2800 6.00 59.702900 4.90 48.90 2900 5.80 57.603000 4.80 48.10 3000 5.60 55.603100 4.80 47.40 3100 5.40 53.603200 4.70 46.60 3200 5.20 51.603300 4.60 45.90 3300 5.10 50.503400 4.50 45.10 3400 5.00 49.503500 4.50 44.40 3500 4.90 48.403600 4.40 43.60 3600 4.70 47.30 3600 6.80 67.70
3700 4.60 46.20 3700 6.60 65.703800 4.50 45.20 3800 6.40 63.703900 4.40 44.10 3900 6.20 61.704000 4.30 43.00 4000 6.00 59.70
4100 5.80 57.604200 5.60 55.604300 5.40 53.604400 5.20 51.604500 5.10 50.504600 5.00 49.504700 4.90 48.404800 4.70 47.304900 4.60 46.205000 4.50 45.205100 4.40 44.105200 4.30 43.00
2020 - 2650 (15.5kg) 2020 - 3620 (19.6kg) 2400 - 4000 (21.1kg) 3600 - 5200 (25.8kg)
The Slabprop is an aluminium light weight prop which is both sturdy and has exceptional safety characteristics. The high load capacity makes it’s suitable for most re-shoring and formwork applications and casting of slabs. The Slabprop comes in four different sizes and ranges in capacity from 43.0 kN to 77.5 kN depending on the extended
LOAD CHART
13mmø
150mm
150mm
134mm
134mm
SLAB PROPS
PROPPING
www.cassaform.com.auP4
PROPPING
www.cassaform.com.aP4
Insert large bold bubble here
You can fill this application out online at
cassaform.applyeasy.com.au/credit
All CorrespondencePhone: 1300 745 674Email: [email protected]
CASSAFORM SAFETY ADVICE
2
1
5 6
4
31. Secure Top Plate
2. Protective hard hat
3. Secure Wrench
4. Two Hands on Prop
5. Secure Base Plate
6. Steel Cap Boots
• During installation of propping and associatedequipment, operator must ensure that PersonalProtective Equipment is worn at all times
• To reduce the risk of injury, proper liftingand handling methods must be utilized. Thisconstitutes bending the knees, hold the objectclose to the body and maintain a straight posturethrough the back. Where necessary always usemechanical lifting aids.
• The load charts are based on props installed
apply ONLY to the Propping Equipment supplied byCassaform and not alternative products suppliedby others.
• The range of propping equipment supplied byCassaform tested to a high structural quality andcomply to the Australian Standards.
PROPPING
www.cassaform.com.auP8
CASSAFORM SAFTEYADVICE
PROPPING
www.cassaform.com.aP8
PROPPING
ww.cassaform.com.au P5
mm t kN mm t kN mm t kN mm t kN1450 7.50 73.31500 7.50 73.31600 7.50 73.31700 7.50 73.31800 7.30 71.71900 7.00 68.61950 6.80 67.0 1950 9.00 88.32000 6.70 65.4 2000 9.00 88.32100 6.50 63.8 2100 8.50 83.02200 6.30 62.2 2200 7.90 77.72300 6.20 61.1 2300 7.40 72.92400 6.20 60.6 2400 7.00 68.62500 6.10 60.0 2500 6.60 64.4
2600 6.30 61.9 2600 7.30 71.42700 6.00 59.3 2700 7.30 71.12800 5.90 57.5 2800 7.20 70.82900 5.70 55.7 2900 7.20 70.43000 5.50 54.3 3000 6.80 67.13100 5.40 52.9 3100 6.40 63.03200 5.20 51.4 3200 6.00 58.93300 5.10 49.8 3300 5.60 54.83400 4.70 46.4 3400 5.40 52.53500 4.40 42.9 3500 5.10 50.2
3600 4.90 47.93700 4.70 46.03800 4.50 44.23900 4.30 42.34000 4.10 40.44100 3.90 38.54200 3.70 36.64300 3.50 34.8 4300 4.50 44.64400 3.40 32.9 4400 4.50 44.64500 3.20 31.1 4500 4.50 44.64600 3.00 29.3 4600 4.50 43.84700 2.80 27.4 4700 4.40 43.04800 2.61 25.6 4800 4.30 42.1
4900 4.20 41.25000 4.10 40.35100 4.00 38.85200 3.70 36.15300 3.40 33.85400 3.30 31.95500 3.00 29.95600 2.90 28.45700 2.70 26.95800 2.60 25.55900 2.50 24.36000 2.40 23.16100 2.20 22.06200 2.10 20.96250 2.10 20.4
MP 250 (15.6kg) MP 350 (19.7kg) MP 480 (25.00kg) MP 625 (34.8kg)
Cassaform Multiprops are very similar to the Slabprops in that they too are constructed of aluminium. They are slightly heavier in physical unit weight and their respective load capacities slightly less than the Slabprop at the same height. These props are well known and accepted in the construction industry and have been used for many years on building sites in different applications. They provide a simple, quick and easy solution to temporary propping where ever it is needed.
LOAD CHART
100mm
87mm
40mmø 14mmø
150mm
150mm
MULTI PROPS
PROPPING
www.cassaform.com.au P5
PROPPING
ww.cassaform.com.au P5
mm t kN mm t kN mm t kN mm t kN1450 7.50 73.31500 7.50 73.31600 7.50 73.31700 7.50 73.31800 7.30 71.71900 7.00 68.61950 6.80 67.0 1950 9.00 88.32000 6.70 65.4 2000 9.00 88.32100 6.50 63.8 2100 8.50 83.02200 6.30 62.2 2200 7.90 77.72300 6.20 61.1 2300 7.40 72.92400 6.20 60.6 2400 7.00 68.62500 6.10 60.0 2500 6.60 64.4
2600 6.30 61.9 2600 7.30 71.42700 6.00 59.3 2700 7.30 71.12800 5.90 57.5 2800 7.20 70.82900 5.70 55.7 2900 7.20 70.43000 5.50 54.3 3000 6.80 67.13100 5.40 52.9 3100 6.40 63.03200 5.20 51.4 3200 6.00 58.93300 5.10 49.8 3300 5.60 54.83400 4.70 46.4 3400 5.40 52.53500 4.40 42.9 3500 5.10 50.2
3600 4.90 47.93700 4.70 46.03800 4.50 44.23900 4.30 42.34000 4.10 40.44100 3.90 38.54200 3.70 36.64300 3.50 34.8 4300 4.50 44.64400 3.40 32.9 4400 4.50 44.64500 3.20 31.1 4500 4.50 44.64600 3.00 29.3 4600 4.50 43.84700 2.80 27.4 4700 4.40 43.04800 2.61 25.6 4800 4.30 42.1
4900 4.20 41.25000 4.10 40.35100 4.00 38.85200 3.70 36.15300 3.40 33.85400 3.30 31.95500 3.00 29.95600 2.90 28.45700 2.70 26.95800 2.60 25.55900 2.50 24.36000 2.40 23.16100 2.20 22.06200 2.10 20.96250 2.10 20.4
MP 250 (15.6kg) MP 350 (19.7kg) MP 480 (25.00kg) MP 625 (34.8kg)
Cassaform Multiprops are very similar to the Slabprops in that they too are constructed of aluminium. They are slightly heavier in physical unit weight and their respective load capacities slightly less than the Slabprop at the same height. These props are well known and accepted in the construction industry and have been used for many years on building sites in different applications. They provide a simple, quick and easy solution to temporary propping where ever it is needed.
LOAD CHART
100mm
87mm
40mmø 14mmø
150mm
150mm
MULTI PROPS
PROPPING
www.cassaform.com.au P5
mm t kN mm t kN mm t kN2020 7.80 77.50 2020 7.80 77.502100 6.80 67.50 2100 7.40 73.902200 5.80 57.60 2200 7.10 70.302300 5.00 49.60 2300 6.70 66.802400 4.80 47.60 2400 6.30 63.20 2400 6.80 67.702500 4.60 45.60 2500 6.00 59.60 2500 6.60 65.702600 4.40 43.60 2600 5.60 56.00 2600 6.40 63.70
2700 5.30 52.50 2700 6.20 61.702800 5.00 49.60 2800 6.00 59.702900 4.90 48.90 2900 5.80 57.603000 4.80 48.10 3000 5.60 55.603100 4.80 47.40 3100 5.40 53.603200 4.70 46.60 3200 5.20 51.603300 4.60 45.90 3300 5.10 50.503400 4.50 45.10 3400 5.00 49.503500 4.50 44.40 3500 4.90 48.403600 4.40 43.60 3600 4.70 47.30
3700 4.60 46.203800 4.50 45.203900 4.40 44.104000 4.30 43.00
2020 - 2650 (15.5kg) 2020 - 3620 (19.6kg) 2400 - 4000 (21.1kg)
The Slabprop is an aluminium light weight prop which is both sturdy and has exceptionalThe high load capacity makes it’s suitable for most re-shoring and formwork applicationsSlabprop comes in four different sizes and ranges in capacity from 43.0 kN to 77.5 kN de
LOAD CHART
13mmø
150mm
150mm
134mm
134mm
SLAB PROPS
PROPPING
www.cassafoP4
PROPPIN
www.caP4P16
EXPERTISEIndustry Experience Over 30 year’s experience within the construction industry. Highly trained employeesLeading service provider of innovative and specialised solutions to the Construction Industry.
Engineering Services
Technical Services including Shop Drawings, preliminaries designed by the specialist engineers.
Account Management
Specialised Services We are continuously looking for better ways to improve
Take the Worry out of Hire and Save
PRODUCT RANGEOne-Stop-ShopCassaform is committed to providing construction sites with the very best construction solutions.
Additional Services - Consumables, Sale Items Cassaform offers a full range of consumable and saleable items across the range of products.
SERVICESConsultationFree consultation service on any of your jobs.
Asset Management SystemTop class management systems to achieve operational excellence. Using Cassaform as your supplier gives access to well established management systems and experience.
Transport LogisticsReliable & On-Time
staff to ensurereliable equipment anywhere in Australia.
SAFETYCassaform aims to create a workplace that is injury free. No job is so important that it cannot be done safely.
PROPPING
www.cassaform.com.auP10
PROPPING
www.cassaform.com.aP10
mm t kN mm t kN mm t kN mm t kN2020 7.80 77.50 2020 7.80 77.502100 6.80 67.50 2100 7.40 73.902200 5.80 57.60 2200 7.10 70.302300 5.00 49.60 2300 6.70 66.802400 4.80 47.60 2400 6.30 63.20 2400 6.80 67.702500 4.60 45.60 2500 6.00 59.60 2500 6.60 65.702600 4.40 43.60 2600 5.60 56.00 2600 6.40 63.70
2700 5.30 52.50 2700 6.20 61.702800 5.00 49.60 2800 6.00 59.702900 4.90 48.90 2900 5.80 57.603000 4.80 48.10 3000 5.60 55.603100 4.80 47.40 3100 5.40 53.603200 4.70 46.60 3200 5.20 51.603300 4.60 45.90 3300 5.10 50.503400 4.50 45.10 3400 5.00 49.503500 4.50 44.40 3500 4.90 48.403600 4.40 43.60 3600 4.70 47.30 3600 6.80 67.70
3700 4.60 46.20 3700 6.60 65.703800 4.50 45.20 3800 6.40 63.703900 4.40 44.10 3900 6.20 61.704000 4.30 43.00 4000 6.00 59.70
4100 5.80 57.604200 5.60 55.604300 5.40 53.604400 5.20 51.604500 5.10 50.504600 5.00 49.504700 4.90 48.404800 4.70 47.304900 4.60 46.205000 4.50 45.205100 4.40 44.105200 4.30 43.00
2020 - 2650 (15.5kg) 2020 - 3620 (19.6kg) 2400 - 4000 (21.1kg) 3600 - 5200 (25.8kg)
The Slabprop is an aluminium light weight prop which is both sturdy and has exceptional safety characteristics. The high load capacity makes it’s suitable for most re-shoring and formwork applications and casting of slabs. The Slabprop comes in four different sizes and ranges in capacity from 43.0 kN to 77.5 kN depending on the extended
LOAD CHART
13mmø
150mm
150mm
134mm
134mm
SLAB PROPS
PROPPING
www.cassaform.com.auP4
PROPPING
www.cassaform.com.aP4
mm t kN mm t kN mm t kN mm t kN2020 7.80 77.50 2020 7.80 77.502100 6.80 67.50 2100 7.40 73.902200 5.80 57.60 2200 7.10 70.302300 5.00 49.60 2300 6.70 66.802400 4.80 47.60 2400 6.30 63.20 2400 6.80 67.702500 4.60 45.60 2500 6.00 59.60 2500 6.60 65.702600 4.40 43.60 2600 5.60 56.00 2600 6.40 63.70
2700 5.30 52.50 2700 6.20 61.702800 5.00 49.60 2800 6.00 59.702900 4.90 48.90 2900 5.80 57.603000 4.80 48.10 3000 5.60 55.603100 4.80 47.40 3100 5.40 53.603200 4.70 46.60 3200 5.20 51.603300 4.60 45.90 3300 5.10 50.503400 4.50 45.10 3400 5.00 49.503500 4.50 44.40 3500 4.90 48.403600 4.40 43.60 3600 4.70 47.30 3600 6.80 67.70
3700 4.60 46.20 3700 6.60 65.703800 4.50 45.20 3800 6.40 63.703900 4.40 44.10 3900 6.20 61.704000 4.30 43.00 4000 6.00 59.70
4100 5.80 57.604200 5.60 55.604300 5.40 53.604400 5.20 51.604500 5.10 50.504600 5.00 49.504700 4.90 48.404800 4.70 47.304900 4.60 46.205000 4.50 45.205100 4.40 44.105200 4.30 43.00
2020 - 2650 (15.5kg) 2020 - 3620 (19.6kg) 2400 - 4000 (21.1kg) 3600 - 5200 (25.8kg)
bprop is an aluminium light weight prop which is both sturdy and has exceptional safety characteristics. gh load capacity makes it’s suitable for most re-shoring and formwork applications and casting of slabs. The op comes in four different sizes and ranges in capacity from 43.0 kN to 77.5 kN depending on the extended
LOAD CHART
13mmø
150mm
150mm
134mm
134mm
B PROPS
PROPPING
www.cassaform.com.auP4
PROPPING
www.cassaform.com.auP4P17
PROPPING
ww.cassaform.com.au P11
Innovative Fast Flexible Formwork Solutions
CASSAFORM’S other innovative product ranges
CASSAFORM P300 Modular Formwork system is a universal formwork system suitable for any type of job where vertical structures cast on site must be built. The P300 panels improve site productivity, reducing costs and saving you money.
CASSAFORM’S SLABFORM FORMWORK system is a modular system of formworks in aluminium for the execution of monolithic or lightened concrete slabs cast in place. SLABFORM is a fully industrialized formwork system that does not require specialized labour for assembly. Also available is CASSAFORM’S LITE FORM systems.
CASSAFORM’S SUPER-SHORE frames are designed to enable working platforms to be positioned at regular height intervals. Frame bracing provides increased strength and stability, particularly for high towers.
Modularity+
Versatility+
+Cost Certainty
+Safety
CASSAFORM P300 MODULAR FORMWORK
CASSAFORM SLABFORM
CASSAFORM SUPER-SHORE
PROPPING
www.cassaform.com.au P11
mm t kN mm t kN mm t kN2020 7.80 77.50 2020 7.80 77.502100 6.80 67.50 2100 7.40 73.902200 5.80 57.60 2200 7.10 70.302300 5.00 49.60 2300 6.70 66.802400 4.80 47.60 2400 6.30 63.20 2400 6.80 67.702500 4.60 45.60 2500 6.00 59.60 2500 6.60 65.702600 4.40 43.60 2600 5.60 56.00 2600 6.40 63.70
2700 5.30 52.50 2700 6.20 61.702800 5.00 49.60 2800 6.00 59.702900 4.90 48.90 2900 5.80 57.603000 4.80 48.10 3000 5.60 55.603100 4.80 47.40 3100 5.40 53.603200 4.70 46.60 3200 5.20 51.603300 4.60 45.90 3300 5.10 50.503400 4.50 45.10 3400 5.00 49.503500 4.50 44.40 3500 4.90 48.403600 4.40 43.60 3600 4.70 47.30
3700 4.60 46.203800 4.50 45.203900 4.40 44.104000 4.30 43.00
2020 - 2650 (15.5kg) 2020 - 3620 (19.6kg) 2400 - 4000 (21.1kg)
The Slabprop is an aluminium light weight prop which is both sturdy and has exceptionalThe high load capacity makes it’s suitable for most re-shoring and formwork applicationsSlabprop comes in four different sizes and ranges in capacity from 43.0 kN to 77.5 kN de
LOAD CHART
13mmø
150mm
150mm
134mm
134mm
SLAB PROPS
PROPPING
www.cassafoP4
PROPPIN
www.caP4P18
PROPPING
ww.cassaform.com.au P11
Innovative Fast Flexible Formwork Solutions
CASSAFORM’S other innovative product ranges
CASSAFORM P300 Modular Formwork system is a universal formwork system suitable for any type of job where vertical structures cast on site must be built. The P300 panels improve site productivity, reducing costs and saving you money.
CASSAFORM’S SLABFORM FORMWORK system is a modular system of formworks in aluminium for the execution of monolithic or lightened concrete slabs cast in place. SLABFORM is a fully industrialized formwork system that does not require specialized labour for assembly. Also available is CASSAFORM’S LITE FORM systems.
CASSAFORM’S SUPER-SHORE frames are designed to enable working platforms to be positioned at regular height intervals. Frame bracing provides increased strength and stability, particularly for high towers.
Modularity+
Versatility+
+Cost Certainty
+Safety
CASSAFORM P300 MODULAR FORMWORK
CASSAFORM SLABFORM
CASSAFORM SUPER-SHORE
PROPPING
www.cassaform.com.au P11
PROPPING
ww.cassaform.com.au P11
Innovative Fast Flexible Formwork Solutions
CASSAFORM’S other innovative product ranges
CASSAFORM P300 Modular Formwork system is a universal formwork system suitable for any type of job where vertical structures cast on site must be built. The P300 panels improve site productivity, reducing costs and saving you money.
CASSAFORM’S SLABFORM FORMWORK system is a modular system of formworks in aluminium for the execution of monolithic or lightened concrete slabs cast in place. SLABFORM is a fully industrialized formwork system that does not require specialized labour for assembly. Also available is CASSAFORM’S LITE FORM systems.
CASSAFORM’S SUPER-SHORE frames are designed to enable working platforms to be positioned at regular height intervals. Frame bracing provides increased strength and stability, particularly for high towers.
Modularity+
Versatility+
+Cost Certainty
+Safety
CASSAFORM P300 MODULAR FORMWORK
CASSAFORM SLABFORM
CASSAFORM SUPER-SHORE
PROPPING
www.cassaform.com.au P11
www.cassaform.com.au P11
CASSAFORM P300 Modular Formwork system is a universal formworksuitable for any type of job where vertical structures cast on site mbuilt. The P300 panels improve site productivity, reducing costs andmoney.
CASSAFORM’S SLABFORM FORMWORK system is a modular system of in aluminium for the execution of monolithic or lightened concrete place. SLABFORM is a fully industrialized formwork system that doesspecialized labour for assembly. Also available is CASSAFORM’S LITE systems.
CASSAFORM’S SUPER-SHORE frames are designed to enable working pto be positioned at regular height intervals. Frame bracing provides increased strength and stability, particularly for high towers.
Modularity+
Versatility+
+Cost Certainty
+Safety
CASSAFORM P300 MODULAR FORMWORK
CASSAFORM SLABFORM
CASSAFORM SUPER-SHORE
www.cassaform.com.au P11
CASSAFORM MODULAR WALL SYSTEMCassaform’s Modular Wall System is suited to any type of job, large or small, where vertical concrete elements are required to be cast insitu. This system improves site productivity, reducing costs and saves money.
www.cassaform.com.au P11
Innovative Fast Flexible Formwork Solutions
CASSAFORM’S other innovative product ranges
CASSAFORM P300 Modular Formwork system is a universal formworksuitable for any type of job where vertical structures cast on site mbuilt. The P300 panels improve site productivity, reducing costs andmoney.
CASSAFORM’S SLABFORM FORMWORK system is a modular system of in aluminium for the execution of monolithic or lightened concrete place. SLABFORM is a fully industrialized formwork system that doesspecialized labour for assembly. Also available is CASSAFORM’S LITE systems.
CASSAFORM’S SUPER-SHORE frames are designed to enable working pto be positioned at regular height intervals. Frame bracing provides increased strength and stability, particularly for high towers.
Modularity+
Versatility+
+Cost Certainty
+Safety
CASSAFORM P300 MODULAR FORMWORK
CASSAFORM SLABFORM
CASSAFORM SUPER-SHORE
www.cassaform.com.au P11
CASSAFORM SUPER-SHORECASSAFORM’S SUPER-SHORE frames are designed to enable working platforms to be positioned at regular height intervals. Frame bracing provides increased strength and stability, particularly for high towers.
CASSAFORM CLIMBING SYSTEMCassaform’s Crane assisted Climbing systems are perfectly suited to Lift and Stair Core concrete elements of your project but can also be adopted to any walls.
PROPPING
Innovative Fast Flexible Formwork Solutions
CASSAFORM’S other innovative product ranges
CASSAFORM P300 Modular Formwork system is a universal formworksuitable for any type of job where vertical structures cast on site mbuilt. The P300 panels improve site productivity, reducing costs andmoney.
CASSAFORM’S SLABFORM FORMWORK system is a modular system of in aluminium for the execution of monolithic or lightened concrete place. SLABFORM is a fully industrialized formwork system that doesspecialized labour for assembly. Also available is CASSAFORM’S LITE systems.
CASSAFORM’S SUPER-SHORE frames are designed to enable working pto be positioned at regular height intervals. Frame bracing provides increased strength and stability, particularly for high towers.
Modularity+
Versatility+
+Cost Certainty
+Safety
CASSAFORM P300 MODULAR FORMWORK
CASSAFORM SLABFORM
CASSAFORM SUPER-SHORE
PROPPING
CASSAFORM ALUMINIUM PANEL SYSTEMCassaform has different aluminum modular panel systems available and ready to use on your next project. Perfectly suited to flat monolithic slabs, they require little or no specialised skills to assemble and reduce labour and material handling costs significantly.
CASSAFORM’S other innovative product ranges
PROUD DISTRIBUTOR OF
Innovative Fast Flexible Formwork Solutions
www.cassaform.com.au
t 1300 745 674
PROUD DISTRIBUTOR OF
Innovative Fast Flexible Formwork Solutions
www.cassaform.com.au
t 1300 745 674
PROUD DISTRIBUTOR OF
Innovative Fast Flexible Formwork Solutions
www.cassaform.com.au
t 1300 745 674