t c i effective from 01/04/2019jan 04, 2019 · we manufacture metric gauges as per ansi/asme b1....
TRANSCRIPT
PR
ICE
LIS
T P
RIC
E L
IST
PR
ICE
LIS
T E
FF
EC
TIV
E F
RO
M 0
1/04
/201
9
Truthread Gauges & Tools Pvt. Ltd PL/15 Dtd. 01/04/2019
We don’t Sell Gauges,
We don’t Sell Gauges,
We Sell Interc
hangeability
We Sell Interc
hangeability
We don’t Sell Gauges,
We Sell Interc
hangeability
ISO 17025-2005
NABL ACCREDITATED LABORATORY
Sr. No. Description Page No.
For better & faster Service,Please ensure that your Enquiry or order should have clear information on,
Type of Gauge like Thread Plug, Thread Ring, Check Plug for Go Ring, Check Plug for Nogo Ring, Wear Check Plug for Go Ring, Wear Check Plug for Nogo Ring,
Nominal Diameter of Size Designation, pitch or TPI, class of fit.In case class of fit is not known then inform us, component pitch diameter withMaximum & Minimum limits.
National or International specification to be followed.
For NPT & NPTF Gauges, clearly mention Basic or with Min./Max. Step & details likeL1, L2, L3, etc.
Right hand or Left hand threads.
ISO Metric Thread Gauges.
Unified Thread Gauges.
BSW / BSF Thread Gauges.
British Association (BA) Thread Gauges.
ISO Parallel Pipe Thread Gauges (BSP).
NGT Taper Gauges.
NPT Taper Gauges.
NPTF Taper Gauges.
BSP Taper Thread Gauges (BSPTr).
Gas Taper Gauges.
1)
2)
3)
5)
7)
9)
10)
4)
6)
8)
INDEX
1 - 4
5 - 7
8
8
9
9
10
10
11
12
PL/15 Dtd. 01/04/2019
GSTIN : 27AAACT6213H1ZI
CIN : U17237PN1982PTC027369
1240
1240
1900
1440
2900
1690
1440
1440
2280
1990
1990
1690
1440
2900
1990
1990
2300
1900
1770
1770
2300
1900
1770
1770
2390
1990
1815
1815
2400
1960
1820
1820
2180
2070
2070
*
*
*
1290
*
1440
2535
830
830
1270
960
1930
1130
960
960
1520
1320
1320
1130
960
960
1690
1930
1320
1320
1530
1270
1180
1180
1530
1270
1180
1180
1600
1320
1210
1210
1600
1320
1210
1210
1450
1380
1380
*
*
*
860
*
DIA. PITCH
ThreadPlugs
Go & Nogo
ThreadRings Go OR Nogo
Check plugGo OR
Nogo Ring
WCP Go Ring OR WCP
Nogo Ring DIA. PITCH
ThreadPlugs
Go & Nogo
ThreadRings
Go OR
Nogo
Check plugGo OR
Nogo Ring
WCP Go Ring
OR WCP
Nogo Ring
‘6H’ ‘6g’ ‘6g’ ‘6g’
Double End Nos. Single EndDouble End
‘6H’ ‘6g’ ‘6g’ ‘6g’
1290 860
Double End Nos. Single EndDouble End
II.INTERNATIONAL ORGANISATIONFOR STANDARDIZATION
I. INDIAN STANDARD (IS)
Basic Dimensions : IS 4218(3)- 1999 IS 4218(4)-2001Gauging Practice : IS 2334-2001
Basic Dimension : ISO 724 - 1993 (E) &
Gauging Practice : ISO 1502 - 1996, ISO 965/1-1998 (E)We manufacture Metric Gauges as per ANSI/ASME B1. 16M, BS 3643, DIN 13, JIS standards. Prices on request.
RIGHT HAND
1.6
2
2.2
2.3
2.6
2.5
3
3.5
4
4.5
5
5.5
6
7
8
9
10
11
1.8
0.35
0.4
0.45
0.4
0.45
0.45
0.35
0.50
0.35
0.60
0.35
0.70
0.50
0.75
0.75
0.50
0.80
0.50
0.75
0.50
1.00
0.75
0.50
1.00
0.75
0.50
1.25
1.00
0.75
0.50
1.25
1.00
0.75
0.50
1.50
1.25
1.00
0.75
0.50
1.50
1.00
0.35
0.75
1930
1270
1270
1600
1550
1270
1935
860
1550
860
1550
860
1270
1270
1270
1270
830
1270
1270
1270
830
1270
1930
830
1270
1930
830
830
1270
1935
830
830
1270
1930
860
830
830
1270
1930
860
830
1930
1270
5040
2210
2210
2210
2210
1660
2540
995
1780
995
1780
995
1410
1410
1410
1410
995
1410
1410
1410
995
1410
2820
995
1410
2820
995
995
1410
2820
995
995
1410
2820
1050
995
995
1410
2820
1050
995
5040
1410
2900
1900
1900
2400
2310
1900
2900
1290
2310
1290
2310
1290
1900
1900
1900
1900
1240
1900
1900
1900
1240
1900
2900
1240
1900
2900
1240
1240
1900
2900
1240
1240
1900
2900
1290
1240
1240
1900
2900
1290
1240
2900
1900
1930
1270
1270
1600
1540
1270
1930
860
1540
860
1540
860
1270
1270
1270
1270
830
1270
1270
1270
830
1270
1930
830
1270
1930
830
830
1270
1930
830
830
1270
1930
860
830
830
1270
1930
860
830
1930
1270
1.75
1.25
1.00
0.75
1.50
0.50
2.00
1.25
1.00
0.75
1.50
1.00
2.00
1.50
0.75
1.50
1.00
2.50
2.00
1.50
1.00
2.50
2.00
1.50
1.00
2.50
2.00
1.50
1.00
3.00
2.00
1.50
1.00
2.00
1.50
1.00
1.50
1.00
3.00
1.50
2.00
1.00
1.25
860
830
830
1270
960
1930
1125
960
960
1525
1325
1325
1125
960
1930
1325
1325
1540
1270
1180
1180
1540
1270
1180
1180
1600
1330
1210
1210
1600
1330
1210
1210
1450
1380
1380
1570
2380
2170
860
1720
960
1690
1050
995
995
1410
1050
2820
1490
1050
1050
1680
1500
1500
1490
1050
2820
1450
1450
1880
1770
1770
1240
2410
2150
1550
1550
2410
2210
1550
1550
2430
2210
1750
1750
2260
1990
1990
1990
1990*
2980
1050
2260
1050
2440
12
15
14
16
17
18
20
22
24
25
26
27
1
I.S.
O M
ETR
IC T
HR
EAD
GA
UG
ES
PL/15 Dtd. 01/04/2019
II.INTERNATIONAL ORGANISATIONFOR STANDARDIZATION
I. INDIAN STANDARD (IS)
Basic Dimensions : IS 4218(3)- 1999 IS 4218(4)-2001Gauging Practice : IS 2334-2001
Basic Dimension : ISO 724 - 1993 (E) &
Gauging Practice : ISO 1502 - 1996, ISO 965/1-1998 (E)We manufacture Metric Gauges as per ANSI/ASME B1. 16M, BS 3643, DIN 13, JIS standards. Prices on request.
RIGHT HAND
DIA. PITCH
Thread Plugs Go & Nogo
Thread Rings Go OR Nogo
DIA. PITCH
Thread Plugs Go & Nogo
Thread Rings Go OR Nogo
Double End Nos.
‘6H’ ‘6g’
Double End Nos.
‘6H’ ‘6g’
4.50 3910 4565
1.50 1570 199028
1.00 2380 1990
2.00
1.50
3.00
3.50
1.00
1900
1820
2380
2990
2380
2680
2480
3160
3410
3170
30
32 1.50
2.00
1.00
1820
1900
2380
2480
2680
3170
33
3.50
1.50
1.00
3.00
2.00
2990
1820
2380
2380
1900
3410
2480
3490
3160
2680
341.50
1.00
1820
2430
2480
3490
351.50
1.00
1820
2430
2480
3490
36
4.00
3.00
2.00
1.50
1.00
3290
2380
1990
1820
2430
2680
2480
3490
3410
3160
381.50
1.00
1820
2430
2480
3490
39
4.00
3.00
2.00
1.50
1.00
3290
2380
1990
1820
2430
3410
3160
2680
2480
3490
40
3.00
2.00
1.50
1.00
2510
1990
1820
2670
3160
2680
2480
3490
42
4.50
4.00
3.00
2.00
1.50
1.00
3910
3910
3060
2230
2160
2870
4565
4100
3920
3360
3170
3860
45
45
3.00
2.00
1.50
1.00
4.00
3060
2230
2160
2870
3910
3920
3360
3170
3860
41001.5027
1570 1990
1.00
2.00
2380
1720
1990
2260
1.00 2870 3860
483.00
2.00
4.00
5.00
1.50
3060
2230
3910
4620
2160
3920
3360
4100
4565
3170
50
3.00
1.50
2.00
1.00
3060
2160
2230
2870
3920
3170
3360
52
4.00
3.00
2.00
1.50
5.00
4675
3590
2700
2530
4800
5320
4800
4190
4020
5750
4190
55
4.00
2.00
3.00
1.50
4675
2700
3580
2530
5320
4190
4800
4020
56
4.00
5.50
3.00
2.00
1.50
4675
4800
3580
2700
2530
5320
5890
4800
4190
58
4.00
1.50
3.00
2.00
4675
2530
3580
2700
5320
4020
4800
4190
4020
60
5.50
4.00
1.50
3.00
2.00
4800
4675
2530
3580
2700
5890
5320
4800
4190
62
4.00
3.00
2.00
1.50
4675
3580
2700
2530
5320
4800
4190
4020
4020
64
6.00
4.00
3.00
5550
4675
3580
6350
5320
4800
I.S.
O M
ETR
IC T
HR
EAD
GA
UG
ES
2 PL/15 Dtd. 01/04/2019
II.INTERNATIONAL ORGANISATIONFOR STANDARDIZATION
I. INDIAN STANDARD (IS)
Basic Dimensions : IS 4218(3)- 1999 IS 4218(4)-2001Gauging Practice : IS 2334-2001
Basic Dimension : ISO 724 - 1993 (E) &
Gauging Practice : ISO 1502 - 1996, ISO 965/1-1998 (E)We manufacture Metric Gauges as per ANSI/ASME B1. 16M, BS 3643, DIN 13, JIS standards. Prices on request.
RIGHT HAND
DIA. PITCH
Thread Plugs Go OR Nogo
Thread Rings Go OR Nogo
DIA. PITCH
Thread Plugs Go & Nogo
Thread Rings Go OR Nogo
Double End Nos.‘6H’ ‘6g’
Single End Nos.‘6H’ ‘6g’
1.50
2.00
2600
2700
4020
419064
4.00
3.00
2.00
1.50
4675
3580
2700
2600
5320
4800
4800
4020
65
Above 65mm Diameter, Plug Gauges are supplied ONLY as
Single Go fitted on One Handle (S/E) And Single Nogo fitted
on another Handle (S/E). You have to place order for Go &
Nogo separately.
DIA. PITCH
Thread Plugs Go OR Nogo
Thread Rings Go OR Nogo
Single End Nos.
‘6H’ ‘6g’
3.00
2.00
1.50
6.00
4.00
2020
1490
1360
3050
2570
4800
4190
4020
6350
5315
68
2570
1490
3050
2020
1360
5315
4190
6350
4800
4020
4.00
2.00
6.00
3.00
1.50
70
6.00
4.00
3.00
2.00
1.50
3050
2570
2020
1490
1360
6350
5315
4800
4190
4020
75
4.00
3.00
2.00
2570
2020
1490
1360
5315
4800
4190
40201.50
6.00
4.00
3.00
2.00
1.50
3640
3060
2310
1735
1630
7260
6555
6070
5290
4960
2.00
1.50
1735
1630
5290
496078
6.00
4.00
3.00
2.00
3640
3060
2310
1735
7260
6555
6070
5290
80
1.50 1630 4960
2.00 1735 529082
82 1.50
85
6.00
4.00
3.00
1.50
2.00
1630 4960
3640
3060
2310
1630
1735
7260
6555
6070
5290
90
2.00 2100
6.00
4.00
3.00
4270
3575
2805
1.50 1990
6720
8550
8250
7655
6310
4960
95
1.50
2.00
1990
2100
4.00
6.00
3.00
3575
4270
2805
6310
6720
8250
8550
7655
100
2.00
3.00
2100
2805
6.00
4.00
4270
3575
1.50 1990
6720
7655
8550
8250
6310
105
6.00
4.00
3.00
5280
3870
3700
1.50 2480
2.00 2600
9810
11320
10450
7170
7720
110
6.00
4.00
3.00
2.00
1.50
5280
3870
3700
2600
2480
11320
10450
9810
7720
7170
115
4.00
3.00
6.00
1.50
3870
3700
5280
2480
2.00 2600
10450
9810
11320
7170
7720
120
6.00
1.50
5280
2600
4.00
3.00
2.00
4040
3860
2700
12925
7880
11495
10810
8490
125
6.00
4.00
5600
4040
12925
11495
2.00
3.00
2700
3860
8490
10810
I.S.
O M
ETR
IC T
HR
EAD
GA
UG
ES
3
72
PL/15 Dtd. 01/04/2019
76
II.INTERNATIONAL ORGANISATIONFOR STANDARDIZATION
I. INDIAN STANDARD (IS)
Basic Dimensions : IS 4218(3)- 1999 IS 4218(4)-2001Gauging Practice : IS 2334-2001
Basic Dimension : ISO 724 - 1993 (E) &
Gauging Practice : ISO 1502 - 1996, ISO 965/1-1998 (E)We manufacture Metric Gauges as per ANSI/ASME B1. 16M, BS 3643, DIN 13, JIS standards. Prices on request.
RIGHT HAND
DIA. PITCH
Thread Plugs Go OR Nogo
Thread Rings Go OR Nogo
DIA. PITCH
Thread Plugs Go OR Nogo
Thread Rings Go OR Nogo
‘6H’ ‘6g’ ‘6H’ ‘6g’
2600 7880125 1.50
130
6.00
4.00
3.00
2.00
1.50
5370
4040
3860
2700
2600
12940
11495
10810
8490
7875
135
4.00
3.00
2.00
6.00
1.50
4565
4360
3310
7040
3160
12240
11470
9480
14380
8990
140
1.50
3.00
2.00
6.00
4.00
3160
4360
3310
7040
4565
8990
11470
9480
14380
12250
145
6.00
4.00
2.00
3.00
1.50
7040
4565
3310
4360
3160
14380
12250
9480
11470
8990
150
6.00
4.00
3.00
2.00
1.50
8490
5550
5290
3990
3825
12075
9820
9430
15590
12940
155
6.00
4.00
3.00
2.00
1.50
8490
5550
5290
3990
3825
15590
12940
12075
9820
9430
160
6.00
4.00
3.00
2.00
1.50
8490
5550
5290
3990
3825
12590
12940
12075
9820
9430
1656.00 9650 18770
6760 154804.00
165
4670
4890
6450
10590
11080
14450
1.50
2.00
3.00
170
9650
6760
6450
4670
4890
18770
15480
14450
10590
11080
6.00
4.00
3.00
1.50
2.00
175
4890
9650
6760
6450
4670
11080
18770
15480
14450
10590
2.00
6.00
4.00
3.00
1.50
180
5380
5650
7850
10450
7500
11740
12350
16980
20610
15820
1.50
2.00
4.00
6.00
3.00
185
5650
7500
10450
7850
5380
12350
15820
20610
16980
11740
2.00
3.00
6.00
4.00
1.50
190
10450
7850
7500
5380
5650
15820
20610
16980
11740
12350
6.00
4.00
3.00
1.50
2.00
195
12800
9010
8600
6500
6180
21770
18020
17200
13560
12900
6.00
4.00
3.00
2.00
1.50
200
9010
8600
12800
6180
6500
18020
17200
21770
12900
13560
4.00
3.00
6.00
1.50
2.00
I.S.
O M
ETR
IC T
HR
EAD
GA
UG
ES
Single End Nos. Single End Nos.
NOTES
THREAD PLUGS OTHER THAN ‘6H’CLASSAdd 25% on the price of corresponding ‘6H’ class thread plug.
THREAD RINGS OTHER THAN ‘6g’CLASS.Nom. Dia. up to 25mm, Add 40% on the price of corresponding ‘6g’ class Thread Ring.Nom. Dia. over 25mm, Add 25% on the price of corresponding ‘6g’ class thread Ring
LEFT HAND THREAD PLUGSAdd 50% on the Price ofCorresponding RIGHT HAND thread plug.
LEFT HAND THREAD RINGSAdd 50% on the price of Corresponding RIGHT HAND Thread Ring
4
Prices above 200 mm on request
PL/15 Dtd. 01/04/2019
Basic Dimension & Gauging Practice : ANSI / ASME B1.2 - 1983
Prices of gauges as per BS 1580-2007 & Gauging Practice to B.S.919 (1)-2007 on request.
Thread
Plugs
Go &
Nogo
RIGHT HAND
DIA. TPI
Double End
‘2B’
Thread
Rings
Go OR
Nogo
‘2A’
Nos. Double End
‘2A’
Single End
‘2A’
Check plug
Go OR
Nogo Ring
WCP
Go Ring
OR WCP
Nogo Ring
Thread
Plugs
Go &
Nogo
RIGHT HAND
DIA.
Double End
‘2B’
Thread
Rings
Go OR
Nogo
‘2A’ ‘2A’
Check plug
Go OR
Nogo Ring
WCP
Go Ring
OR WCP
Nogo Ring
3370 225024 UNEF 2250 3255
TPI
UN
IFIE
D T
HR
EAD
GA
UG
ES
UNIFIED THREAD GAUGES
5
Nos. Double End Single End
‘2A’
5/8" No. 0
No. 1
No. 2
No. 3
No. 4
80 UNC
64 UNC
72 UNF
56 UNC
64 UNF
48 UNC
56 UNF
40 UNC
48 UNF
2600
2600
2600
2600
2600
2600
2600
980
980
.......
.......
.......
.......
.......
.......
1380
1380
3900
3900
3900
3900
3900
3900
3900
1470
1470
2600
2600
2600
2600
2600
2600
980
2600
980
PL/15 Dtd. 01/04/2019
.......
No. 5 40 UNC
44 UNF
980
980
1380
1380
1470
1470
980
980
No. 632 UNC
40 UNF
980
980
1380
1380
1470
1470
980
980
No 832 UNC
36 UNF
980
980
1380
1380
1470
1470
980
980
No 10 24 UNC
32 UNF
980
980
1380
1380
1470
1470
980
980
No 1224 UNC
28 UNF
980
980
1380
1380
1470
1470
980
980
32 UNEF 1490 1380 2240 1490
1/4"20 UNC
28 UNF
980
980
1380
1380
1470
1470
980
980
32 UNEF 1490 2810 2240 1490
5/16"18 UNC
24 UNF
980
980
1380
1380
1470
1470
980
980
32 UNEF 1490 2810 2240 1490
3/8"
18 UNC
24 UNF
980
980
1380
1380
1470
1470
980
980
32 UNEF 1490 2810 2240 1490
7/16"14 UNC
20 UNF
980
980
1490
1380
1470
1470
980
980
28 UNEF 1490 2810 2240 1490
1/2"13UNC
20 UNF
980
980
1490
1380
1470
1470
980
980
28 UNEF 1490 2810 2240 1490
9/16"
12 UNC
18 UNF
1130
1130
2240
1600
1700
1700
1130
1130
20 UN 1710 3255 2560 1710
24 UNEF 1710 3255 2560 1710
5/8"
11 UNC
18 UNF
1600
1320
3255
3255
2390
1980
1600
1320
20 UN 2250 3255 3370 2250
11/16"
12 UNC
18 UNF
2250
2250
3255
3255
3370
3370
2250
2250
20 UN 2250 3255 3370 2250
24 UNEF 2250 3255 3370 2250
3/4"
10 UNC
12 UN
1750
2250
2340
3255
2625
3370
1750
2250
16 UNF 1320 1600 1980 1320
20 UNEF 2250 3255 3370 2250
13/16"12 UN
16 UNF
2250
2250
3255
3255
3370
3370
2250
2250
20 UNEF 2250 3255 3370 2250
7/8"
9 UNC
12 UN
2380
2250
3580
3560
3560
3370
2380
2250
14 UNF 1330 1600 1990 1330
16 UN 2250 3560 3370 2250
20 UNEF 2250 3560 3370 2250
15/16" 12 UN
16 UN
2250
2250
3560
3560
3370
3370
2250
2250
20 UNEF 2250 3560 3370 2250
1"
8 UNC
12 UNF
2380
2250
3580
3560
3560
3370
2380
2250
14 UNS 2250 3560 3370 2250
16 UN 2250 3560 3370 2250
20 UNEF 2250 3560 3370 2250
1.1/16"
8 UN
12 UN
3530
2260
5290
2480
16 UN 2260 2480
18 UNEF 3260 4210
*
*
*
*
*
*
*
*
1.1/8"
7 UNC
12 UNF
3700
2260
5550
2480
16 UN 2260 2480
18 UNEF 3260 4210
*
*
*
*
*
*
*
*
1.3/16"
7 UN
12 UNF
3700
2480
5550
3260
16 UN 2480 3260
18 UNEF 3260 4210
*
*
*
*
*
*
*
*
1.1/4"
7 UNC
8 UN
3700
3700
5550
5550
*
*
*
*
12 UNF 2480 3260
16 UN 2480 3260
*
*
*
*
18 UNEF 3260 4960
20 UN 3260 4960
*
*
*
*
2.1/8"
6 UN
8 UN
12 UN
16 UN
6490
5260
3380
3380
8660
6875
4880
4880
20 UN 3580 5565
1.15/16"
8 UN
12 UN
16 UN
4220
2850
2850
6240
3625
3625
1.3/4"
5 UNC
8 UN
12 UN
16 UN
20 UN
5200
4210
2850
2850
3580
7880
6240
3625
3625
5565
1.5/8"
8UN
12 UN
16 UN
18 UNEF
20 UN
3625
3625
5565
5665
6240
6 UN
8 UN
16 UN
20 UN
12 UN
18 UNEF
6240
6240
3625
3625
5565
5565
1.9/16"
Basic Dimension & Gauging Practice : ANSI / ASME B1.2 - 1983
Prices of gauges as per BS 1580-2007 & Gauging Practice to B.S.919 (1)-2007 on request.
UN
IFIE
D T
HR
EAD
GA
UG
ES
UNIFIED THREAD GAUGES
6
RIGHT HAND
‘2B’ ‘2A’
1.5/16"
1.3/8"
1.7/16"
8 UN
12 UN
16 UN
18 UNEF
20 UN
6 UNC
8 UN
12 UNF
16 UN18 UNEF
20 UN
6 UN
8 UN
12 UN
16 UN
18 UNEF
20 UN
3700
2480
2480
3260
3260
3700
3700
2480
24803260
3260
3700
3700
2480
2480
3260
3260
5550
3260
3260
4960
4960
5550
5550
3260
32604960
4960
5550
5550
3260
3260
4960
4960
6 UNC
8 UN
12 UNF 3260
5500
55001.1/2"
16 UN 3260
20 UN
4210
2850
2850
3580
3580
4210
4210
2850
3580
2850
3580
3700
3700
2480
248018 UNEF 49603260
3260 4960
Thread Plugs
Go & Nogo
RIGHT HAND
DIA. TPI
Double End
‘2B’
Thread Rings
Go OR Nogo
‘2A’
Nos.
RIGHT HAND
8 UN 4210
1.13/16"12 UN
16 UN
20 UN
2850
2850
3580
3625
3625
5565
6240
1.7/8"
8 UN
12 UN
20 UN
16 UN
4220
2850
3580
2850
6240
3625
5565
3625
8 UN
4.5 UN
12 UN
4220
5190
2850
6240
7940
36252"
16 UN 2850 3625
20 UN 3580 5565
2.1/4"
4.5 UNC
8 UN
12 UN
16 UN
6490
5260
3380
3380
8660
6875
4880
4880
8 UN 5260 6875
2.3/8" 12 UN
16 UN
3380
3380
4880
4880
PL/15 Dtd. 01/04/2019
Thread Plugs
Go & NogoDIA. TPI
Double End
‘2B’
Thread Rings
Go OR Nogo
‘2A’
Nos.
1.11/16"
8 UN
12 UN
16 UN
18 UNEF
20 UN
4210
2850
2850
3580
3580
6240
3625
3625
5565
5565
2.1/2
4 UNC
8 UN
12 UN
6490
5260
3380
8660
6875
4880
16 UN 3380 4880
Above Dia. 2.1/2”, Plug Gauges are supplied as Go
separate & Nogo separate (Single End). You have to place
separate order for Go & separate for Nogo.
Basic Dimension & Gauging Practice : ANSI / ASME B1.2 - 1983
Prices of gauges as per BS 1580-2007 & Gauging Practice to B.S.919 (1)-2007 on request.
UNIFIED THREAD GAUGES
UN
IFIE
D T
HR
EAD
GA
UG
ES
PL/15 Dtd. 01/04/2019
Thread Plugs
Go OR Nogo
RIGHT HAND
DIA. TPI
Single End
‘2B’
Thread Rings
Go OR Nogo
‘2A’
Nos.
2.3/4"
2.7/8"
3"
3.1/8"
2830
1760
3320
2830
1760
1760
4210
3255
2260
2260
4210
3255
2260
2260
8 UN
12 UN
4 UN
8 UN
16 UN
12 UN
4 UNC
8 UN
12 UN
16 UN
4 UNC
8 UN
12 UN
16 UN
2.5/8" 12 UN
16 UN
1770
1770
8UN 2830
6875
4880
8660
6875
4880
4880
10725
5980
8550
5980
10725
8550
5980
5980
4480
4480
6875
176016 UN 4880
3.1/4"
4210
3255
2260
2260
4 UNC
8 UN
12 UN
16 UN
10725
8550
5980
5980
3.1/2"
5335
4280
2820
2820
4 UNC
8 UN
12 UN
16 UN
12300
10570
7465
7465
RIGHT HAND
Thread Plugs
Go OR NogoDIA. TPI
‘2B’
Thread Rings
Go OR Nogo
‘2A’
Single End Nos.
4"
5"
6"
7"
12 UN
16 UN
4 UNC
8 UN
12 UN
16 UN
4 UNC
8 UN
12 UN
16 UN
4 UNC
8 UN
12 UN
16 UN
2820
2820
6360
5480
4850
3920
9530
7510
5575
4740
11220
9295
7170
6310
8"
4 UNC
8 UN
12 UN
13290
10430
8960
16 UN 7860
5335
4280
7465
7465
13860
12080
9555
9090
16240
13310
11080
20100
16225
13610
13030
10640
22520
18250
15130
14560
12300
10570
4 UNC
8 UN
3.3/4"
5335
4280
2820
2820
4 UNC
8 UN
12 UN
16 UN
12300
10570
7465
7465
THREAD PLUGS OTHER THAN ‘2B’CLASSAdd 25% on the price of corresponding ‘2B’ class thread plug.
THREAD RINGS OTHER THAN ‘2A’CLASS.Nom. Dia. up to 1” Add 40% on the price of corresponding ‘2A’ class Thread Ring.Nom. Dia. over 1” Add 25% on the price of corresponding ‘2A’ class thread Ring
LEFT HAND THREAD PLUGSAdd 50% on the Price ofCorresponding RIGHT HAND thread plug.
LEFT HAND THREAD RINGSAdd 50% on the price of Corresponding RIGHT HAND Thread Ring
NOTES Prices above 8 inches on request
TYPES of series based on Diameter TPI combination
UNC - Unified National Coarse.
UNF - Unified National Fine.
UNEF - Unified National Extra Fine.
UN - Unified National Series for Constant Pitch.(4, 6, 8, 12, 16, 20, 28, 32, TPI)
UNS - Unified National Special (Special Diameter TPI Combinations).
Recommended classes:
External Threads (Thread Ring Gauges) 1A, 2A & 3A.
Internal Threads (Thread Plug Gauges) 1B, 2B & 3B
7
Basic Dimension : B. S. 84 - 2007
Gauging Practice : B. S. 919, Part II - 2007
RIGHT HAND
Thread Plugs
Go & Nogo
RIGHT HAND
Thread Plugs
Go & NogoDIA. TPI
Thread Rings
Go OR Nogo
Thread Rings
Go OR NogoDIA. TPI
Double End
1/8(0.125)
40 BSW 3780
3/16(0.1875)
24 BSW
32 BSF
2510
2510
2890
4275
1/4(0.25)
20 BSW
26 BSF
2510
2510
2890
2890
5/16 (0.3125) 22 BSF
18 BSW
2510
2510 2890
2890
3/8(0.375)
16 BSW
20 BSF
2510
2510
2890
2890
7/16(0.4375)
14 BSW
18 BSF
2510
2510
2890
2890
½ (0.5)
12 BSW
16 BSF
2510
2510
2890
2890
9/16(0.5625)
12 BSW
16 BSF
3350
3350
4050
4050
2890
9/16(0.5625) 3350
3350
26 BSB
26 Whits 4050
5/8(0.625)
335011 BSW
14 BSF 3350
4050
4050
3/4(0.75)
4540
4540
10 BSW
12 BSF
6350
4050
7/8 (0.875) 4540
4540
11 BSF
9 BSW 6350
6350
14540
4540
8 BSW
10 BSF
6810
6350
1.1/8(1.125)
8190
8190
7 BSW
9 BSF
9000
6810
1.1/4(1.25)
8190
8190
7 BSW
9 BSF
9000
9000
1.1/2(1.5)
8190
8190
6 BSW
8 BSF
9000
9000
9000
MEDIUM CLASS MEDIUM CLASS
Nos
Nos.Double End Nos.Double End
2 B.A
3 B.A
3840
3840
4235
4235
5 B.A
6 B.A
3840
4860
4235
6200
SIZE
Thread Plugs Go & Nogo
Thread Ring Go OR Nogo
Basic Dimension : B. S. 93 - 1951
Gauging Practice : B. S. 919, Part II - 2007
BRITISH ASSOCIATION (BA) THREAD GAUGES.
RIGHT HAND
SIZE
Thread Plugs Go & Nogo
Thread RingGo OR Nogo
NORMAL CLASS
THREAD PLUGS OTHER THAN MEDIUM CLASS.Add 25% on the price of corresponding ‘Medium’ Class plug
THREAD RINGS OTHER THAN ‘MEDIUM’ CLASS.Nom. Dia. up to 1” Add 40% on the price of corresponding ‘Medium’ class Thread Ring.Nom. Dia. over 1” Add 25% on the price of corresponding ‘Medium’ class thread Ring
LEFT HAND THREAD PLUGSAdd 50% on the Price ofCorresponding RIGHT HAND thread plug.
LEFT HAND THREAD RINGSAdd 50% on the price of Corresponding RIGHT HAND Thread Ring
NOTES
4 B.A 3840 4235 7 B.A 4860 6200
Pl.
refe
r n
ote
fo
r P
rice
s o
fga
uge
s n
ot
cove
red
in t
his
tab
le.
THREAD PLUGS OTHER THAN ‘NORMAL’ CLASS.Add 50% on the price of corresponding ‘Normal’ Class Thread Plug.
THREAD RINGS OTHER THAN ‘NORMAL’ CLASS.Add 50% on the price of corresponding ‘Normal’ Class Thread Ring.
LEFT HAND THREAD PLUGSAdd 100% on the Price ofCorresponding RIGHT HAND thread plug.
LEFT HAND THREAD RINGSAdd 100% on the price of Corresponding RIGHT HAND Thread Ring
NOTES
RIGHT HAND NORMAL CLASS
BSW / BSF THREAD GAUGES.
BSW
/ B
SF T
HR
EAD
GA
UG
ES.
BR
ITIS
H A
SSO
CIA
TIO
N (
BA
) TH
REA
D G
AU
GES
.
8
Double End Nos. Nos.
Prices not covered here on request
PL/15 Dtd. 01/04/2019
DIA. TPI Plug General ClassDouble End
I. INDIAN STANDARD (IS)
Basic Dimensions : IS 2643 - 2005Gauging Practice : IS 10216 - 1988
GENERAL CLASS CLASS B
II.INTERNATIONAL ORGANISATIONFOR STANDARDIZATION
Basic Dimension : ISO 228 Part I - 2000Gauging Practice : ISO 228 - Part II - 1987
PlugGo OR GoSingle End
(Double End)
G 1/4"
G 3/8"
G 1/2"
G 5/8"
G 3/4"
G 7/8"
G 1"
G 1.1/8"
G 1.1/4"
G 1.3/8"
G 1.1/2"
G 1/8"
19
19
14
14
14
14
11
11
11
11
11
28
1240
1240
1580
1580
1680
1680
2520
2520
2520
2730
2730
1240
G 1.3/4" 11 2950
LEFT HAND THREADS Add 50% on the Prices of RIGHT HAND Threads.FOR CLASS A THREAD RINGS Add 20% on the Prices of CLASS B RINGS.
Above G2, Thread Plug Gauges are supplied as
Go separate & Nogo Separate (Single End.Pl. order Go & Nogo
separately.
G 2"
G 2.1/4"
G 2.1/2"
G 2.3/4"
G 3"
11
11
11
11
11
2950
G 3.1/2"
G 4"
G 5"
11
11
11
G 6" 11
ISO PARALLEL PIPE THREAD GAUGES (BSP)
ISO
PA
RA
LLEL
PIP
E TH
REA
D G
AU
GES
(B
SP)
As per IS 15894 - 2011
Size
TAPER PLUG GAUGESRIGHT HAND
297028503/4" - 14 1330 3270 4280 4620 4895 5340
TAPER RING GAUGES
Gauge A Gauge B Gauge C M - EXT Gauge D Gauge E Gauge F M - INT
TaperThread
PlugL 1
TaperPlainPlug
MasterTaper Thread
PlugGauge
TaperThread
PlugL 9
Plain TaperRing to
check CrestTruncation
TaperThread
Ring L 1
TaperThread
RingL 8
MasterThread
Ring Gauge
NGT TAPER GAUGES
NG
T TA
PER
GA
UG
ES.
9
Prices of Gauges as per old IS 9121 on request.
PL/15 Dtd. 01/04/2019
RIGHT HAND THREAD PLUG GAUGES THREAD RING GAUGES
Ring Class BGo OR No Go
*
*
*
*
*
*
*
*
*
*
*
*
*
1820
1820
2310
2310
(Single End)
*
3030
3030
4450
6510
2150
2150
3200
3200
3360
3360
4250
4250
4250
4410
4410
2150
5350
5350
5350
5350
6940
6940
8880
8880
10980
13790
Prices of L2 Thread Ring gauges.
L2 Basic - Add 25% on the price of corresponding L1 Basic Thread Ring
L2 Step Limit - Add 25% on the price of Corresponding L1 step Thread Ring
Basic Dimensions and Gauging Practice toBasic Type - ANSI/ASME B1.20.1-1983Step Limit Type - N.B.S. Handbook H28 Part II - 1957
RIGHT HAND NPT L1 STEP LIMIT
DIA. TPI THREAD PLUG THREAD PLUGTHREAD RING THREAD RING
NPT L1 BASIC STEP
2365
2365
1980
1980
1980
1980
2475
2475
3000
3920
4750
4750
4750
7350
7525
8050
8050
9950
10950
12150
27
27
18
18
14
14
11.1/2
11.1/2
11.1/2
11.1/2
8
8
8
8
8
8
8
8
8
8
4050
4050
3660
3660
3135
3135
4675
4675
5000
5775
6300
6300
6300
9850
9550
10850
10850
14050
15470
*
2600
2600
2175
2175
2175
2175
2720
2720
3300
4310
5225
5225
5225
8085
8275
8850
8850
10950
12050
13350
1/16
1/8
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
3.1/2
4
4.1/2
5
6
8
10
12
5280
5280
4800
4800
4080
4080
6120
6120
6500
7560
7860
7860
7860
11940
11940
13260
13260
17580
19380
*
Pl.
refe
r n
ote
fo
r P
rice
s o
fga
uge
s n
ot
cove
red
in t
his
tab
le.
NOTES
NPTF THREAD RING GAUGE
DIA.L1
TPI
RIGHT HAND NPTF THREAD PLUG GAUGE
L3 L1 L3 L1 L2 L2L1
Basic Basic Step Limit Step Limit Step LimitStep LimitBasic Basic
2900
2900
2420
2420
2420
2420
3245
3245
3520
4730
5650
5650
7975
8600
27
27
18
18
14
14
11.1/2
11.1/2
11.1/2
11.1/2
8
8
8
8
3190
3190
2660
2660
2660
2660
3570
3570
3870
5200
6215
6215
8780
9460
4890
4890
4450
4450
3875
3875
5920
5920
7040
7040
7930
7930
8690
9460
1/16
1/8
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
3.1/2
4
5850
5850
5340
5340
4650
4650
7100
7100
8450
8450
9510
9510
10430
11350
5340
5340
4860
4860
4225
4225
6470
6470
7680
7680
8650
8650
9480
10320
4450
4450
4050
4050
3520
3520
5390
5390
6400
6400
7210
7210
7900
8600
2900
2900
2420
2420
2420
2420
3245
3245
3520
4730
5650
5650
7975
8600
2640
2640
2200
2200
2200
2200
2950
2950
3200
4300
5140
5140
7250
7820
NPTF THREAD GAUGES
Basic Dimensions and gauging Practice to
ANSI/ASME B1.20.5 - 1991, H-28 Part II - 1957(USED FOR DRYSEAL APPLICATION)
NP
TF
TH
RE
AD
GA
UG
ES
NPT TAPER GAUGES.
NP
T TA
PER
GA
UG
ES.
10 PL/15 Dtd. 01/04/2019
Basic Dimensions ISO 7/1 - 1994 OR IS - 554 - 1999Gauging Practice ISO 7/2 - 2000 OR IS 8999 - 2003 BS EN 10226 : 3 - 2005
RIGHT HAND
DIA. TPI
Plain TaperRing
TaperFull Form
Thread Plug
TaperFull form
Thread Plugwith relief.
TaperModified
Form CheckPlug for
Ring
ParallelFull form
Thread Ring
ParallelModified Thread form
Ring Gauge
Gauge No. 1 Gauge No. 2 Gauge No. 3 Gauge No. 4 Gauge No. 5 Gauge No. 6
3820
3070
3070
3070
3070
4000
4000
4000
6070
6250
6250
9125
10950
12045
28
19
19
14
14
11
11
11
11
11
11
11
11
11
1/8
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
5
6
4950
3950
3950
3950
3950
5200
5200
5200
7890
8125
8125
11850
14235
15650
7380
5880
5880
5350
5350
7800
7800
7800
9720
9720
9720
14650
16800
18480
4420
3525
3525
3210
3210
4680
4680
4680
5830
5830
5830
8790
10080
11050
6275
5000
5000
4550
4550
6630
6630
6630
8270
8270
8270
12450
14280
15700
For B.S.P.Tr (Pipe Threads with Pressure-tight joints on threads)Three different specifications are used.Before Ordering, carefully choose correct specification as per your requirement.
OR
Choose specification Carefully before ordering.
BSP TAPER THREAD GAUGES (BSPTr)
BSP
TA
PER
TH
REA
D G
AU
GES
(B
SPTr
)
11
4585
3685
3685
3685
3685
4800
4800
4800
7285
7500
7500
10950
13140
14455
PL/15 Dtd. 01/04/2019
DIA. TPI
Basic Dimensions IS 554 - 1975 Gauging Practice IS 8999 - 1979 OR BS 21 - 1985
RIGHT HAND
TaperPlainPlug
System B System B
28
19
19
14
14
11
11
11
11
11
11
11
11
11
1/8
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
5
6
2250
1850
1850
1850
1850
2400
2400
2400
3600
3750
3750
5475
6570
7220
In these specifications ‘System A’ & System B’ are recommended.
You have to choose either of these two based on your application
TaperThread
Plug
System A
4585
3685
3685
3685
3685
4800
4800
4800
7285
7500
7500
10950
13140
14455
TaperThread
Ring
System A
7380
5880
5880
5350
5350
7800
7800
7800
9720
9720
9720
14650
16800
18480
TaperThread
Plug
System B
3820
3070
3070
3070
3070
4000
4000
4000
6070
6250
6250
9125
10950
12045
TaperThread
Ring
System B
7380
5880
5880
5350
5350
7800
7800
7800
9720
9720
9720
14650
16800
18480
TaperPlainRing
4420
3525
3525
3210
3210
4680
4680
4680
5830
5830
5830
8790
10080
11050
Specification - IS 7202-1974 & BS 341 – 1991 ( Taper 1:8 )
GAS TAPER GAUGES
GA
S TA
PER
GA
UG
ES
RIGHT HAND
Full form Thread Plug forChecking threads in cylinder Neck ' Gauge 'A '
Thread Plug for Checking Pitch Diameter of threads in cylinder Neck Gauge ' B '
5200
4350
2950
2470
8660
7250
3860
3670
6300
5250
3650
3050
12390
10080
4820
4330
6400
5500
3800
3190
12810
10290
5200
4670
Plain Plug for checking Minor Dia. at small end of Taper in cylinder neck Gauge ' C '
Plain Plug for checking Minor Dia. at Large end of Taper in cylinder neck Gauge ' D '
Full form Thread Ring for Checking threads on Taper stem ' Gauge 'E '
Thread Ring for Checking Pitch Diameter ofthreads on Taper stem Gauge ' F '
Plain Ring for checking Major Dia. at small end of Taper stem Gauge ' G '
Plain Ring for checking Major Dia. at Large end of Taper stem Gauge ' H '
0.715” - 14(18.16 mm)
1” - 14(25.4 mm)
1.250” - 11(31.75mm)
12
Specification - DIN 477 – 1984 ( Taper 3:25 ) DIN – EN 629 & ISO 11363-2:2010 (E) 31.30 size is recommended in DIN 477 - 1984, but not specified in DIN – EN 629 & ISO 11363-2:2010 (E)
17E( 19.8 mm )
14 TPI
25E( 28.8 mm )
14 TPI
Size 3 ( 31.30 )14 TPI
RIGHT HAND
6400
6400
6400
3800
3800
3800
12810
12810
12810
5200
5200
5200
6300
6300
6300
3650
3650
3650
12390
12390
12390
4820
4820
4820
5200
5200
5200
2960
2960
2960
8660
8660
8660
3860
3860
3860
Single part threaded plug gauge – Gauge 'I-2'
Two part threaded plug gauge, small end diameter - Gauge 'I-4'
Two part threaded plug gauge, large end diameter - Gauge 'I-6'
Single part plain plug gauge- Gauge 'I-1'
Two part plain plug gauge - small end diameter- Gauge 'I-3'
Two part plain plug gauge - large end diameter - Gauge 'I-5'
Single part threaded Ring gauge - Gauge 'I-8'
Two part threaded ring gauge - large end diameter Gauge 'I-12'
Single part plain ring gauge - Gauge 'I-7'
Two part plain ring gauge - small end diameter Gauge 'I-9'
Two part plain ring gauge - large end diameter Gauge 'I-11’
Two part threaded ring gauge - small end diameter Gauge 'I-10'
Gauges for Internal Threads/ Cylinder.
Gauges for External Threads/ Valves.
PL/15 Dtd. 01/04/2019
Specifications for Gauge Blanks
For Thread Plug Gauges, Check Plug Gauges & Wear Check Plug Gauges
Nom. Diameter 1 - 100 mm
Nom. Diameter above 100 mm
I.S 9610 - 1985
Company standard based on DIN 2285 & DIN 2299
For Thread Plug Gauge Handles
I.S 5388 - 1983
GSTIN : 27AAACT6213H1ZI
CIN : U17237PN1982PTC027369
Registration Nos.
Terms of Business
Prices
GST
Packing
Despatch
Payment
: Ex-works, Pune.
: Extra as applicable at the time of dispatch
: Extra 3%
: Extra 3%
: Courier service OR Road transport
: Advance by RTGS / NEFT
Proforma Invoice.
Please let us know the name and full address of your Bankers, along with the Order.
Nom. Diameter 1 - 40 mm
Nom. Diameter 40 - 120 mm
Nom. Diameter 120 - 200 mm
Nom. Diameter above 200 mm
I.S 9631 - 1983
I.S 9608 - 1985
I.S 10685 - 1983
Company standard.
For Thread Ring Gauges
PL/15 Dtd. 01/04/2019
Freight
‘TRUTHREAD’ the name synonymous with Quality thread gauges wasestablished in 1982.
During this journey of Three decades, by continuous modernization,we have built Manufacturing & Calibration facilities, which are comparable to global standards.
Today, we have a modern plant, measuring around twenty five thousandsquare feet, with battery of top class machine Tools including CNC machines. All the Thread Grinding machines are imported from world leaders like, ‘Matrix Grinding Technologies,- U.K. ‘and ‘Reishauer- Switzerland’.
Even the marking on gauges is done with the help of Computer controlled ‘Laser Marking Machine’. These excellent manufacturing facilities help us to produce gauges ‘ TRUE’ to the thread specifications.
The precision of manufactured gauges is checked by our ‘Quality Assurance’department, equipped with measuring equipments, like Universal Measuring Machines, capable of measuring up to 0.0001mm. Our calibration lab is Accreditated by NABL for ISO 17025-2005 standard.
Precision Machines & measuring equipments, unless handled by competent and dedicated manpower, do not produce ‘Quality Gauges’. Our employees, in unison, are striving hard to achieve objectives of ‘Zero Defect Gauges’ & ‘Total Customer Satisfaction’.
More than this Infrastructure & manpower, we have added around three thousand active customers in our family. Without the support, confidence &trust of our customers, this journey would have not been possible & meaningful.
E-mail AddressesE-mail AddressesE-mail Addresses
[email protected]@[email protected]
ww
w.t
ruth
read
.co
m
PL/15 Dtd. 01/04/2019
TRUTHREAD GAUGES & TOOLS PVT. LTD.TRUTHREAD GAUGES & TOOLS PVT. LTD.TRUTHREAD GAUGES & TOOLS PVT. LTD.
T - 83, M.I.D.C. Bhosari, Pune - 411 026. IndiaTel : +91 - 20 - 4676 9500, 4676 9505, 4678
CIN : U17237PN1982PTC027369