t80 quadcopter lotus rc lotus rc - himodel2012.pdf · users are required to have the basic...
TRANSCRIPT
T80 Quadcopter LotusRC
T80 Basic Quadcopter Manual Version 1.0
(Internal document)
(25 July 2011)
LOTUS
RC ™
T80 Quadcopter LotusRC
Read the following RED sentences carefully before proceeding to read
the instructions, as it concerns the safety and liability of the user.
·Safety notes:
1. This product is a remote control model with rotating rotors that may
pose risks, users under 15 years old please do not operate this model.
Users are required to have the basic knowledge of model operation
and safety to operate this model. We advise that you to operate it
under professional supervision or guidance.
·Disclaimers
1. Please do not use this product for any illegal activities. The user must
bear all responsibility and consequences resulting from the use of this
product.
2. This model contains a large number of sophisticated components and
electronics which may fail over time. LotusRC and our dealers will
take no responsibility to such losses, be it direct or indirect as a
consequence to this failure.
Notice:
Upon purchasing this product, you automatically accept the terms and
conditions above.
T80 Quadcopter LotusRC
Table of content
Foreword:
Product Summary ………………………………………………………………………….….…….........…5
1. Function and feature……………………………………………………………….…....…….…..…...5
2. Model Dimensions.…………………………………… …………….………………..……….....…...6
3. Model parameter and specification…………………………………………….…………..…....7
4. Technical parameter…………………………………………………………….……............….……7
Parts’ name ………………………………………………………………………………….…………………….8
1. Major body components………………………………………………………….…………....………8
2. Electronics……………………………………………………………………………….………..…...….…8
3. Software system………………………………………………………………….…………….….….……9
Assembly…………………………………………………………………………….………….…….…...……...9
1. Main body……………………………………………………………………..………………………..…….9
2. Foot stand ………………………………………………………………….………….……….....….……..9
3. Propellers……………………………………………………………….………………………….….………9
Connection set…………………………………………………………………………………….……….…...10
1. Receiver connection……………………………………………….…………………………...………..10
2. Battery installation…………………………………………….…………………..……….….……...…13
3. Remote controller set……………………………………….…………….……….…………...….…..13
4. Operation and checking……………………………………….……………………………...….…….14
First flight………………………………………………………………………………………………………..…15
1. Protection while no signal…………………………………………….……………….……...…..…15
2. High throttle protection…………………………………………………….……….…………..…….16
3. Signal lost protection……………………………………………………………………..……………..17
4. Low battery protection………………………………………………………………..…..……………18
Operation presentation……………………………………………………………….………..……..……18
Packing list……………………………………………………………………………….……………….…….….19
Version illustration............................................................................................…….19
Support and help………………………………………………………………….………….…………………19
Information feedback…………………………………………………………………………………..…....20
Warranty…………………………………………………………………………………………………..………..20
T80 Quadcopter LotusRC
Foreword
Before using T80 quad-copter, please read the following
instructions carefully. It will help you to understand how to
operate the model in a shorter time. If there are any enquires after
reading this manual, please contact us for any further clarification.
In order for us to serve you better, please purchase this product
via a legal channel. Users using our product for illegal activities,
including the purchase of this product via illegal channel, are not
eligible to obtain the service support.
We reserved the rights to claim legal liability to anyone with illegal
activities, these includes copying our products and distribution and also
the marketing and circulating of our products without written permission
from LotusRC.
As we have ongoing enhancement to the products, we reserved the right
to update the products without prior notice. You can obtained the latest
information by visiting our info website. We welcome your feedback on
the usage experience and any improvement suggestions.
I Product Summary
1. Functions and features
The T80 quad-copter is a mini size model model designed for indoor
and outdoor recreational flight. It is capable to hang a light PTZ
camera, and able to do flight photography or FPV flight.
i. Small in dimension and light weight with the ability to take off and
land vertically. Minimum noise during flight and fit for a small area of
flight.
ii. Safe and easy to control during stable flight. With a built-in flight auto
stabilization system, the user does not need to correct the flight
altitude frequently. Thus, stable hovering and aerial flight can be
achieved.
iii. It uses four direct drive brushless motors, fitted at the optimum
position to achieve high power conversion and stronger thrust.
iv. With the flexible flight environment and the ability to configure the
model, hanging an equipment of reasonable weight is possible for
flight photography, FPV, etc, including any expandable legal activities.
v. All model metal parts are processed by sophisticated CNC skill,
reasonably structured, they have a strong resistance to impact, and
T80 Quadcopter LotusRC
are also very durable.
vi. Only 4 remote control proportion channels are required.
vii. A dark grey translucent cover will help to observe working condition
of the model.
2. Model dimensions
(mm)
Profile and dimension
Unfold dimension (mm) recommended battery placement
T80 Quadcopter LotusRC
3. Parameter and specification
*This sheet is only for reference, product configuration may have a
little alteration in different versions.*
NO. Components’
name Specification
quantit
y Unit Remarks
1 Main body cover PU composite 1 Set _
2 Cross arm carbon fiber 4 Pc _
3 Foot stand Silicagel, high
strength aluminum 1 Set _
4 Motor number C`1803high efficiency
brushless 4 Pc
Special
purpose
5 Propeller GWS7035 frontal and
reversed propeller 4 Pc _
6
Brushless
electronic
controller
2S 6A electronic high
speed controller 4 Set
Special
purpose
7 Flight control
system
Inertial attitude self
stable system 1 set
Special
purpose
T80 Quadcopter LotusRC
4. Technical parameter
*This sheet is only for reference, product configuration may have a little
alteration in different versions. *
Model size 298x298x243 Mm ±±±±3mm3mm3mm3mm
Maximum expandable
size
475x475x128 Mm ±±±±3mm3mm3mm3mm
Motor to motor Diagonal distance between two motor centers
Mm ±±±±3mm3mm3mm3mm
Battery liPo 2S 850 mAh 15c Standard
configurati
on
1300mAh is
usable
Unit ARF weight No battery, receiver,
applicable load
165grams ±±±±5grams5grams5grams5grams
Takeoff weight 2S 850mAh battery, receiver 230grams Standard
configuration
Efficient payload Mini vidicon / camera ≤≤≤≤50grams50grams50grams50grams standard
Maximum lift force Use850mAh standard battery 380grams _
Maximum payload Use 850mAh standard battery ≤≤≤≤80grams80grams80grams80grams _
Maximum takeoff
weight
Use850mAh standard
battery
280grams Safety margin
Flight distance Depend on remote control
equipment and battery
capacity
_ _
Flight time 2S850mAh 15C battery 12mins Hovering
while no wind
Wind resistance ≤≤≤≤4444 classclassclassclass _
T80 Quadcopter LotusRC
ⅡⅡⅡⅡ. Component names
1. Model components:
(Model exploded view)
No. Components Name Quantity
1 Cover 1
2 Blade Holder 4
3 Propeller 4
4 Locking Block 4
5 Brushless Motor 4
6 Pedestal 2
7 ESC 1
8 FC 1
9 Quad-copter Arm 4
10 Landing Gear 2
1
2
3 7
8
9
10
4
2
5
6
T80 Quadcopter LotusRC
2. Electronic components
1) High speed brushless electronic speed controller, can keep the
output maximum current at 6A. Excellent payload performance and
special stop rotating protection methods, could prevent overloading
the power FET efficiently. With a built-in communication signal
monitoring mechanism, motors will be shutdown gradually when
lost of RF signal.
2) Flight controller system utilizes a high speed main control chip with
great stability. Combined with high performance MEMS technology
transducer, it provides stable and reliable flight control.
3. Software system
Specializing in development of quad-copter pneumatic layout
model, we own flight controller and high speed brushless electronic control system with fully intellectual property right. The flight software enable simple and ease of use with minimum setup process.
ⅢⅢⅢⅢ. Assembly
1. Main body
Model main body has been assembled before shipping, it contains all
electronic equipments for quick and easy setup.
2. Foot Stand
Factory fitted and ready
3. Propeller
T80 utilizes 4 pieces normal and reverse propellers (7inch), match
motor shaft with loose threaded fixture, it's need to screw securely
by washer and aluminum blade holder to make sure it is stable and
safe. Front and back propeller rotates counter clock wise with a
symbol “7035” on the cover; right and left propeller rotates clock wise
with a symbol”7035R”. Propeller installation pictures are followed.
Attention: for safety reasons, do not install propellers first, do it after
setting is finished.
ⅣⅣⅣⅣ. Connection installation
1. Receiver connection
Compatible with most FM and 2.4G channel standard remote control
equipment. Example: Spectrum, JR, Sanwa, Futaba, Hi-TEC, GWS,
WFLY, ESKY etc. a minimum 4channel receiver is required to take off
and land this model vertically, hover, altitude hold, fly left or right,
forward or backward with ease.
T80 Quadcopter LotusRC
RC equipment size after fully field tested:
Secure the receiver inside or under the main body, plug flight
controller signal
line in corresponding output channel of receiver. Channels of Futaba
and JR receiver are different; refer to follow pictures during
connection.
NO. Brands RC transmitter Receiver Remarks
1 WFLY FT06-C FRP06 _
2 Futaba FF9 R149DP _
3 Futaba 6EX R146Ip _
4 Futaba 10C _
4 JR DSX7 RD721 _
5 JR 9X11 _
5 Spectrum DX7 AR7100 _
6 Sanwa RD8000 92777 _
7 Hi-TEC Eclipse7 FRP06 _
T80 Quadcopter LotusRC
2. Battery installation
• T80 model main power battery is fastened securely under the
main body, easy to dismantle. Battery with standard configuration is
2S 850mAh 15C Li-poly battery, the recommended maximum battery
size is 2S 1300mAh. Flight time will be extended accordingly, but
battery capacity’s increase may not be directly proportion with flight
time, as larger battery’s increased taking off weight, this will lower
model’s thrust-weight ratio and reduce flight maneuver performance .
3. Remote controller installation
Set remote controller with NO mix control fixed wing mode, rudder
travel at 100%. Trim adjustment turn to middle level. If it is new
remote controller equipment, please confirm it is in working
condition.
Power on RC, and set throttle stick to the lowest level, then put
model on the stable flat ground; you may use the level meter to
ensure the model on a good level condition, it’s vital to hovering.
Power on the model, then a warning tone will come out from four
brushless motors; when the warning tone end, it means it can fly.
Attention: do not move the model while it is on initial powered up,
model needs to do self-checking on transducer, only move the model
after self-checking is finished.
4. Operational check
T80 quad-copter is designed as a only as standard ”+” flight mode. Put
model in front of you with the yellow arm pointing front. Check to
ensure your radio stick movement control the model at the right
direct.
Picth stick forward will tilt the model forward and roll stick right the
model will roll right. When rudder left, the model will yaw left,
pointing the head to left.
T80 Quadcopter LotusRC
ⅤⅤⅤⅤ. First flight
1. Preparation before starting fly.
a. Check if all airframe parts are securely installed;
b. Check whether propellers are assembled correctly, propeller
clips are secured.
c. Check receiver and FC is connected correctly.
d. Check whether battery is secured.
e. Range check the radio communication.
2. Taking off and landing
After model powered up and self-checking is finished, gently push
throttle to start motors, wait a moment for the motor to spool up the
speed. Push throttle till the propellers increase rotating speed but not
leave the ground, check whether model is drifting, correct it by
rudder fine adjustment. Push the throttle now till the model hover
and you can start the flight.
Keep hovering condition while landing, and pull down throttle slowly
till the model landed successfully. Taking off and landing features of
quad copter are similar to RC helicopter, for users who are familiar
with helicopter model, T80 will be a simple to operate model.
Attention: as affected by ground effect, airframe tilt phenomenon
may take place while taking off; use your rudder control to correct it.
3. Signal and forced landing
1)No signal protection: no RC signal while starting up, model will enter
standby mode, red LED is blinking, and beeper with intermittent long
beep at the same time. Model will be out of standby protection status
when receiving reliable RC signal.
2) High throttle protection: while powering up model, Radio throttle
stick is not in low level, model will enter throttle protection mode,
red, green LED will be blinking at the same time, beeper will have
“b-e-e-e-e-p” too, till throttle return to a low position, model will be
out of safety protection mode.
3) Signal interrupt protection: when model in operation, once RC signal
interrupt is detected, FC red LED will blink, beeper will beep a
moment at the same time, to warn user the RC signal is lost, if it is in
flying status, FC protection model will trigger force landing function
to land model automatically, during the force landing, beeper will
keep beeping. If signal recovered during landing, it will exit landing
process, continue normal flying.
Landing automatically can’t be less than 5sec, model will have
T80 Quadcopter LotusRC
enough time for landing, and actual landing time depends on current
flight height and throttle stick position. It’s a limited self-protection
landing, aimed at minimizing damage to the mode, it doesn't mean
the protection is perfectly safe, if your receiver has failsafe control
function, please activate it.
4) Low battery protection: upon low battery, model’s green LED will
blink, beeper has fast intermittent warning tone. Please land down
and replace model battery. If user sticks to fly, model will lower flight
height, till landing on ground. During low battery protection process,
RC operation still work.
Attention: when model battery is low, please land immediately to
replace battery, low battery flight may crash the model.
ⅥⅥⅥⅥ. Operation status
1. Red LED: remote control signal indicator light, blink while no remote
control signal, and stays ON if remote control signal is detected.
2. Green LED: battery voltage indicator light, blink while model battery
is low, and stays ON with good power level.
LED indicator light status presentation: No. Red Green Features Status presentation
1 1 1 Extinguish after
blink 1sec
Power up indicator, model is in
initializing
2 X 1 Blinking Model battery is low
3 X 1 Stays ON Power supply is full
4 1 X Blinking No remote control signal
5 1 X Stays ON Have good remote control signal
6 1 1 Synchronous blinking While powering up, throttle is not at low
level
7 1 1 Stays ON Normal operation
X=both, 1=Stays ON.
ⅦⅦⅦⅦ. Packing list
1. Factory assembled main model includes brushless ESC, FC, motor;
2. Foot stand parts: include 4 transparent silicone tubes
3. One pairs of normal and reversed GWS7035 propeller, 2 sets
4. Bullet propeller clip: 4 pieces
5. VELCRO
6. One Product data CD.
T80 Quadcopter LotusRC
7. One model manual
8. One factory test certification.
ⅧⅧⅧⅧ. Version illustration
ⅨⅨⅨⅨ. Support and help
1. Common troubleshooting reference table.
ⅩⅩⅩⅩ Information / feedback
If you encounter any problems during your use, you may contact us
by phone or e-mail, your opinions and suggestion are welcome. We will
continue to improve our products with your input.
Website: :www.LotusRC.com
Service support E-mail: [email protected]
Shen Zhen LotusRC Technology co., ltd
E-mail: [email protected]
TEL: 86-755-36925606 FAX: 86-755-36925606
Postcode: 518131
Building A, 4th floor, JunXun Science and Technology Park, luowuwei,
dalang, longhua town, Baoan dist, Shenzhen, China
ⅪⅪⅪⅪ. Warranty: Thank you very much for using our products. Please keep
the purchasing invoice, it is considered as the prove of warrantee. We
provides one year's warranty period. Whenever possible, please consult
the troubleshooting steps provided in the manual first, or visit our
website. If you believe the product is faulty, return it with proper
packaging, our technician will examine and repair it for you.