table of contents · 1. mdi corporation company name mdi corporation company name (en) mdi...

Table of Contents

1. MDI Corporation 2. Oriental Consultants Co., Ltd. 3. Kureha Ecology Management Co., Ltd. 4. CTI Engineering International Co., Ltd. 5. Kendensha Co., Ltd 6. JFE Plastic Resource Corporation 7. Geostyle Co., Ltd 8. Shinoda Co., Ltd. 9. Soushow Co., Ltd 10. Device & System Platform Development Center Co., Ltd. 11. Deloitte Touche Tohmatsu LLC 12. Nakasho Co.,Ltd 13. Niihama Iron Works Co., Ltd. 14. Nippon Thermoener Cc., Ltd. 15. Tepia Corporation Japan 16. Nihon Genryo Co., Ltd 17. Japan Thread Co., Ltd 18. Nippon Basic Co., Ltd. 19. Fujiks Co., Ltd 20. Fuji Furukawa Engineering Construction Co. Ltd.

1. MDI Corporation

Company Name MDI Corporation

Company Name (EN) MDI Corporation

President President & Representative Director - Kenji Iwasawa

Address

Contact 044-201-6822Capital 10 million yenNo. of Employees 7E-mail [email protected] www.mdirect.jp

Japan: Tohoku Sales Office (Sendai City) and agenciesOverseas: China, Korea, Thailand, the Philippines and othersOur company specializes in heat exchangers for waste heat recovery.With abundant experience and an extensive lineup that cannot be matched by other companies, we are able to provide optimum energy saving proposals.We also sell centrifuge pre-filters (which can remove contaminants as small as 20μm), "Dynamic Descaler" (a safe and powerful limescale cleaner), and"Dynamic GC-S" (a safe and powerful oil stain cleaning liquid with many usesfrom home use to industrial).

We are looking for distributors who agree with our management philosophy of"Saving the earth through heat-exchange system solutions," understand ourproducts, and can introduce our products to customers as our distributor.

We also accept OEM production and sales of Dynamic GC-S, our safe Alkaline cleaning solution.

Heat exchangersLimescale cleaning solutionAlkaline cleaning solutionCentrifugal separatorsFiltersCooling tower partsHeat Pumps

Kawasaki Green Innovation Cluster Member Information

Busin

ess A

ctiv

ities

, Mes

sage

s and

Oth

ers

BusinessActivities

Message/Other

Examples ofProducts

3-12-10 Asada, Kawasaki-ku, Kawasaki-shi, Kanagawa

Com

pany

/Org

aniz

atio

n In

form

atio

n

Branches/Agencies

MDI CorporationCentrifuge pre-filter "Multi Cyclone"

Keywords

Price

CostIt can be used semi-permanently.

It can not remove objects without specific gravity or which havehigh viscosity.We have a lineup of products to suit various uses and volumes of water to be treated.

Product/TechnologyCompany Name

Kawasaki Green Innovation Cluster Product Technology InformationO

verv

iew

of P

rodu

cts/T

echn

olog

ies

Features

It is a centrifuge prefilter, which started to be adopted by a companyspecializing in heat exchangers for waste heat recovery to removecontaminants from water when recovering waste heat. Contaminant removalusing only 15% of the cooling tower circulating water with "multi cyclone"makes it possible to reduce blowdown wastewater by 50%, which makes itpossible to reduce operation and maintenance expenses.

heat recovery, energy saving, cleaning solution

List price JPY379,600～1,660,000

Adv

anta

ges

Patent and award history

Examples of use(Domestic and overseas)

Det

aile

d In

form

atio

n ab

out P

rodu

cts/T

echn

olog

ies

Details

This product uses centrifugal force to continuously remove contaminants witha specific gravity in the same manner as cyclone vacuum cleaners. Theprocess is completed the separated foreign matter is rinsed away with about 15liters of drain water. Since there is no filter, replacement parts or stopping thepumps are not necessary.

Capabilities

Life cycle

Remarks

Pictures relating toproducts andtechnologies

It is possible to remove contaminants which are solid and between 20 microns and2 mm. (The required specific gravity is 1.5 kg/L or more.)

2. Oriental Consultants Co., Ltd.

Company Name Oriental Consultants Co., LTD.Company Name (EN) Oriental Consultants Co., LTD.President Hidenori NozakiAddressContact 03(6311)7851Capital 500,950,000 yenNo. of Employees 828E-mail [email protected] http://www.oriconsul.com/english/index.php

Japan: Offices are located all across the country

Overseas:

・ Urban & regional planning/social policy・ Rivers & ports・ Traffic ・ Water & sewage・ Tourism & landscaping ・ Railway・ Business management ・ Airport・ Conservation ・ Architecture・ Disaster management・ Road (roads, highways, tunnels, underground structures, bridges)・ Environment (low carbon/energy, environmental management)

Com

pany

/Org

aniz

atio

n In

form

atio

n

Branches/Agencies

Sumitomo Fudosan Nishi-Shinjuku Building No.6, 3-12-1 Honmachi Shibuya-ku, Tokyo

Offices and subsidiaries around the world (project experience in over 150 countries)


Busin

ess A

ctiv

ities

, Mes

sage

s and

Oth

ers

Message/Other

(Corporate collaboration)We support domestic companies related to JICA projects and JCM projects by using all of ourexperiencses in various projects and relations with the governments of each country.

(Our strengths)We have completed projects not only in Japan, but also in more than 150 countries. We haveextensive experience offering various types of capacity development assistance to the centraland local governments of developing countries and collaborating with many domestic privateenterprises.

Examples ofservices

■ Supporting government-related schemes such as JICA and JCM Feasibility Study /Verification Project«JICA project»We advise, examine and works on each step of processing business (preliminary survey,proposal preparation, contract negotiation, field survey, report preparation, settlement etc.) tosupport for overseas deployment of JICA SMEs.«JCM project»We will support feasibility studies (FS) and demonstration projects such as planningimplementation plans and financing plan for the realization of the project at the bilateralcredit system (JCM), formulation of MRV methodology.

BusinessActivities

・ Agriculture, rural/regional development support

■ We provide various services from planning, design, and proposal to construction,operation and management for all social infrastructure such as transportation, landscape,environment.

Oriental Consultants Co., LTD.

Reference price

ServicesCompany Name

Services and consulting services related to overseas expansion of domestic companies

Kawasaki Green Innovation Cluster Service Information

Ove

rvie

w o

f Ser

vice

s

Features

Provide consulting services to realize the project at every scene from upstream(planning/ survey/ design) to downstream (implementation/ operation/ maintenance)in Japan and overseas.

KeywordsConsultants / Transport / Environment / Landscaping / Tourism / BusinessManagement / Roads / Bridges / Tunnels / Disaster Prevention / Rivesr / Harbors /Water Supply

Det

aile

d In

form

atio

n ab

out S

ervi

ces

Service Details

Adv

anta

ges

Achievements

«FY 2016 JICA SME Support Project»· Verification Survey with the Private Sector for Disseminating JapaneseTechnologies for the Introduction of Soil Improvement Technology for MekongDelta Waterway Revetment Construction· Feasibility Survey with the Private Sector for Utilizing Japanese Technologies inODA ProjectsIndonesia, Introduction of Precast Stormwater Infiltration Curb and Storage Facilities· 4 others projects«Other»Surveys and contracts with MLIT, other ministries and agencies, and municipalities

Oriental Consultants Co., Ltd. (OC) andOriental Consultants Global Co., Ltd. (OCG) support the overseas expansion of small and medium enterprises including the backup system for each overseas office.

◆Example for JICA Support for Japanese Small and Medium Enterprises (SMEs) Overseas Business Development

OC and OCG have successfully completed a vast range of projects in over 150 countries over the company's 45 years as a global consultant. Currently, we are developing various projects through 10 overseas offices.

Overseas BusinessInvestigate about the possibility of utilizing the product/ technology for use in developing countries.

Verification Survey of ODA project

Feasibility Survey

Information Collecting Studies

Following the verification survey, utilize the products for developing country governments and ODA projects, promote overseas expansion into the market

Examples of support from public entitiesMinistry of Foreign Affairs/ JICA: information by country, information gathering and business plan preparation support

(Verification Survey )Collaborate with government agencies/organizations to use the SME's product/technology to help resolve developmental

3. Kureha Ecology Management Co., Ltd.

Company Name Kureha Ecology Management Co., Ltd.Company Name (EN) Kureha Ecology Management Co., Ltd.President President & Representative Director - Katsuhiro NATAKEAddress 30 Shitanda, Nishiki-machi, Iwaki City, FukushimaContact 0246-63-1231Capital 240 million yenNo. of Employees 344 (as of Sept. 2016)E-mailWebsite http://www.kurekan.co.jp/en/

Japan:

Overseas:

Product/ Technology GASTAK: solvent recovery, deodorization, exhaust gas treatment equipment

Air and water environment related equipment such as automated equipment

Busi

ness

Act

iviti

es, M

essa

ges a

nd O

ther

s

BusinessActivities

We are working to preserve the environment through collection, transportation and intermediateprocessing of industrial waste, and comprehensive engineering service of environment relatedequipment.We develop technologies based on customer needs, supply VOC exhaust gas treatment equipmentand wastewater treatment equipment, offer equipment operation and management support.contained in exhaust gas of production facilities in environment related facilities. We are playinga part in the industrial revitalization of "City of Manufacturing - Kawasaki" as a venous (recyclingand detoxification) industry through the appropriate treatment of various types of waste such asdetoxification treatment of POPs (low concentration PCB, PFOS) etc, handling medical waste,disposing of waste created by disasters.Wastech Kanagawa, a 4.8 MW biomass power plant, was established in order to help create alow-carbon society. Wastech Kanagawa is contributing to the regional energy supply.

Messages /Others

Kureha Ecology Management started participating in the Non-Profit Organization Liaison Centerfor Creation of Industry & Environment and then began working with companies in the Kawasakicoastal area. We've also cooperated with local environment-related enterprises to create newprojects, and try to create new businesses with environment-related local enterprises in Kawasakicity. We are also participating in the formulation of the Kawasaki Coastal Area Vision, a plan forthe development of the area into the next 30 years, and are continually making efforts to becomethe sort of company that is increasingly needed in the future.

Examples ofProducts

Honest Limer: water treatment facility, improvement of water quality, extension of pipe life cycle

Activated carbon purification treatment equipment: Removal of mildew and other unpleasant odors and tastes

from raw water; absorption and removal of fats and oils

■Technical service Proper collection, handling and incineration of difficult-to-process industrial waste Biomass (paper scraps, wood chips, fiber scraps, animal and vegetable residues) power generation

Com

pany

/Org

aniz

atio

n In

form

atio

n

Branches/Agencies

Headquarter and 6 offices (Related to waste: Kawasaki, Sendai, Ibaraki, Tokyo, Mie;Related to environmental engineering: Osaka)None

Kawasaki Green Innovation Cluster

Kureha Ecology Management Co., Ltd.

Price

※ Detailed specifications/quotation following consultation.

Cost ※ Detailed specifications/quotation following consultation.

① GASTAK system photo and system flowchart for reference.

② Honest Limer system photo and system flowchart (for reference)

② Honest Limer: several domestic patents

① GASTAK: Japan: more than 550 units, Overseas (Taiwan, China,..): 40 units② Honest Limer: more than 300 units in water purification plants, etc., throughout JapanA

dvan

tage

s Patent and awardhistory

① GASTAK: Japan Industrial Machinery Industry Association Chairman's Award Winner in 2003

Examples of use(Domestic and

overseas)

Det

aile

d In

form

atio

n ab

out P

rodu

cts/T

echn

olog

y

Details

Capabilities

Life cycle

Remarks

Pictures relatingto products and

technologies

① GASTAK: A lineup of products to suit needs up to a process rate of ~ 1,400 m3/min② Honest Limer water amount: Slaked lime injection up to ~ 500,000 m3/day.

Products/Technology

Company NameEnvironment-related equipment (VOC exhaust gas treatment equipment GASTAK, watertreatment equipment Honest Limer)

Kawasaki Green Innovation Cluster Product/Technology InformationO

verv

iew

of P

rodu

cts/T

echn

olog

y

Features

① GASTAK: a VOC / exhaust gas treatment system using reusable granular activated carbon(Kureha's unique technology ) as an adsorbent. It is aimed at recovering the organic solvents andremoving harmful and malodorous substances from exhaust gas. "Kureha spherical activatedcarbon" "G-BAC" is high-strength activated carbon with high sphericity, and it has excellentabrasion resistance and fluidity.② HONEST LIMER: It is slaked lime automatic dissolution injection equipment for water utilities.It has been implemented in many water purification plants throughout the country and contributesnot only to the prevention of rusty water but also to the prolonged life cycles of water supplyequipment (water purification water distribution equipment) and pipes by preventing corrosion.Safe and delicious water can be provided by improving the Langelier Index (an indicator of watercorrosiveness).

Keywords① VOC exhaust gas treatment equipment, volatile organic solvent recovery, air purification, BACspherical activated carbon, circulating deodorizing equipment② Purified water distribution equipment, calcium hydroxide, rusty water prevention

≪HN Type≫≪SN Type≫

Kureha Ecology Management Co., Ltd.

Reference pricePlease find the attached PDF - service details 1, service details 2.

Det

aile

d In

form

atio

n ab

out S

ervi

ces

Service Details

Adv

anta

ges

Achievements

· FY 2013 Ministry of the Environment Japan Circulation Industry Overseas Expansion BusinessPromotion Project: "Industrial Solid Waste Suitable Harmless Treatment Project for JiangsuProvince, China" Project (survey support, etc)· FY2016 NEDO Global warming vs. technology promotion project (JCM feasibility study)"JCM feasibility study through packaged introduction of wood biomass power generationtechnology in Penang province, Malaysia"· On November 26, 2015, obtained certification for the detoxification treatment of low-concentration polychlorinated biphenyl waste from the Minister of the Environment

ServicesCompany Name

Proper treatment of difficult-to-treat industrial waste, power generation project from waste

Kawasaki Green Innovation Cluster Service Information

Ove

rvie

w o

f Ser

vice

s Features

Wastech Iwaki, an incineration facility located in Iwaki City, Fukushima Prefecture, iswell-suited for processing waste containing harmful substances such as halogenouswaste, medical waste and heavy metals including fluorine and chlorine. In "KanagawaWest" of Kawasaki city, we are performing the thermal recycling using electricitygeneration using biomass (paper scraps, wood chips, fiber scraps, animal and vegetableresidues), waste plastics, waste heat from medical waste incineration. We have alsoestablished "Kawasaki Logistics Center" as a logistics center in the Keihin area andprovide services that can respond to a wide range of customer needs.

Keywords

· POPs (low concentration PCB waste, PFOS) · halogen compounds such as chlorine,fluorine and bromine · dioxins · reaction intermediates in the production of chemicalsand pharmaceuticals · sulfuric acid pitch · specially controlled industrial waste ·specified hazardous industrial waste · Biomass · Thermal recycling · Material recycling

4. CTI Engineering International Co., Ltd.

Company Name CTI Engineering International Co., Ltd.Company Name (EN) CTI Engineering International Co., Ltd.President Representative Director and President Norio TOMONAGAAddressContact 03-3638-2575, 03-3638-2622Capital 100 million yenNo. of Employees 150E-mail [email protected], [email protected] http://www.ctii.co.jp/en

Japan: Tokyo

Overseas:

· JICA private technology promotion project· Bilateral credit (JCM) project / NEDO survey project

Busin

ess A

ctiv

ities

, Mes

sage

s and

Oth

ers

Business Activities

Investigation, planning, design, construction supervision, project managementwork related to overseas infrastructure development and social environmentimprovement(Water quality environmental planning, waste management planning, climate changemeasures, energy saving/renewable energy, environmental assessment, flood controlplanning, urban drainage planning, water resource management planning, sewerageimprovement planning, road planning, river structure planning, road structureplanning, bridge structure planning, participatory development, organizationalsystem survey, socioeconomic survey, etc.)

Message/Other

We support "sustainable development" as a partner with developing countries. Weprovide our services by not only approaching the issues and problems thatdeveloping countries face from the one aspect of the project, but also by steppingback to look at the entire picture and how it can be connected to sustainabledevelopment. The spiral model of project development (continuous chain) isimportant for future development, so we will continue to offer high-quality supportfor the improvement of people's living environments and conservation of the naturalenvironment through the use of the spiral model.

Examples ofServices

Surveys, planning, design, construction supervision, project management workrelated to overseas infrastructure development and social environmentimprovement(Water management planning, urban drainage planning, water resource managementplanning, sewerage maintenance planning, road planning, water quality environmentalplanning, waste management planning, river structure planning, dam structure planning, roadstructure planning, road structure planning, bridge structure planning, participatorydevelopment, institutional organization survey, socioeconomic survey, environmentalassessment etc.)Proposal preparation, joint implementation, accounting processingin the following public offering business

· Commissioned research projects by the Ministry of the Environment, Ministry ofEconomy, Trade and Industry, Ministry of Land, Infrastructure and Transport

· JICA SME overseas deployment support project (basic investigation, projectinvestigation, diffusion and demonstration project)

Com

pany

/Org

aniz

atio

n In

form

atio

n

Branches/Agencies Manila, Philippines / Ulaanbaatar, Mongolia / Islamabad, Pakistan / New Delhi,

India / Phnom Penh, Cambodia / Bishkek, Kyrgyzstan / Jakarta, Indonesia

Tachibana Annex Building 2-25-14 Kameido, Koto Ward, Tokyo, 136-0071


CTI Engineering International Co., Ltd.

Reference price

Adv

anta

ges

Achievements

We have experience in consulting services related to the small business support projects below.Partnership Promotion Survey2014 Kenya Medical waste disposal businessFeasibility Survey2014 Myanmar Water Environment Improvement Project2015 Cambodia Sludge compostingVerification Survey2015 Philippine Disaster prevention and disaster countermeasure system2015 Improvement of Myanmar's water environment2016 Cambodia Improvement of living environment, sanitation.

Det

aile

d In

form

atio

n ab

out S

ervi

ces

Service Details

Construction Engineering International (CTII) was established as a strategic subsidiaryspecializing in international business by Construction Technology Research Institute (TSE1st Section) - the first construction consultant in Japan. CTII has implemented a total of641 projects in 81 countries worldwide, and currently has liaison offices in sevencountries. Its parent company has subsidiaries in China and Myanmar. We mainly provideconsulting services in Official Development Assistance (ODA), and provide services suchas proposal preparation, joint implementation and accounting processing in variousprojects with open bidding.

Interview with the village leaders Training for government officials in developing countries

Road construction supervision Organizing seminars for government officials andprivate organizations

Service Services and consulting services related to surveys, etc., in developing countriesCompany Name

Kawasaki Green Innovation Cluster Service InformationO

verv

iew

of S

ervi

ces

Features

Investigation, planning, design, construction supervision, project management work related tooverseas infrastructure development and social environment improvement(Water quality environmental plan, waste management plan, climate change measures, energysaving / renewable energy, environmental assessment, flood control plan, urban drainage plan, waterresource management plan, sewerage improvement plan, road plan, river structure plan, roadstructure plan, bridge structure planning, participatory development, organizational system survey,socioeconomic survey, etc.)

KeywordsWater quality, waste, water supply, sewage, climate change, energy conservation,renewable energy, environmental assessment, Philippines, Indonesia, Mongolia,Cambodia, Kyrgyzstan, India, Pakistan, Myanmar, China

5. Kendensha Co., Ltd

Company Name KENDENSHA Co., Ltd.Company Name (EN) KENDENSHA Co., Ltd.President Ryuichi IshitobiAddress 1372-15 Nagahamacho, Izumo-shi, Shimane, 693-0043, JAPANContact 0853-28-1818Capital 30 million yenNo. of Employees 20E-mail [email protected] http://kendensha.com/bin/index.cgi

Japan: Headquarter and 1 office: Tokyo Sales OfficeOverseas: C.C.KENDENSHA Co., Ltd., a KDS Separator distributor in Thailand

・ Elliptical plate type - Solid-liquid separator (KDS Separator)

・ CF screen device (CF-503)

・ Concentrated dehydration system (Clean Saver)

・ Flocculant automatic dissolving device

Com

pany

/Org

aniz

atio

n In

form

atio

n

Branches/ Agencies


Busin

ess A

ctiv

ities

, Mes

sage

s and

Oth

ers

Business Activities

Our company is an environmental equipment manufacturer. We have headquarters inIzumo-shi, Shimane prefecture. We have perform the whole range of services (design,manufacturing and sales), which allows us to can flexibly respond to customers. In recentyears, we have specialized in the primary treatment of wastewater and have proposed aplant using coagulant. KDS Separator, a waste water treatment contaminant removal andconcentration dehydrator (one of our representative products), was developed 15 years agoand 630 units have been sold. A patent has been secured domestically for its mechanismthat prevents clogging by adopting spheroidal plates.

Message/Other

Examples ofProducts

We have an interest in preparations for JICA's Project Formulation Survey and aVerification Survey with the Private Sector for the Dissemination of Japanese Technologyfor wastewater treatment and waste disposal.We are also looking for the companies that have business experience in entering themarket in Southeast Asian countries. We are also looking for chemical manufacturers andmicrobial treatment companies for collaboration using our concentrated dehydrator.

KENDENSHA Co., Ltd.Elliptical plate type - Solid-liquid separator (KDS Separator)

Price

CostOperating time 8h × 20days × 12 months × 3 years = 5760 h

Thickening model Dewatering model

2016 Thai joint venture - C. C. KENDENSHA Co., Ltd was established.2017 Entry to Vietnam

Kawasaki Green Innovation Cluster Product/ Technology InformationA

dvan

tage


Japanese national patent The 43rd Small and Medium Enterprise Inspection Award


overseas)

Det

aile

d In

form

atio

n ab

out P

rodu

ct/T

echn

olog

y

DetailsSS-2.56: Sludge treatment amount 20 kg - dS / h, external dimension W 359 - L 636 - H 174, weight: about 45 kg

SS-1212: sludge throughput 310 kg - dS / h, external dimensions W 1560 - L 1450 - H 465, weight: about 600 kg

Capabilities

Life cycle

Remarks


Product/Technology

Other fees may occur for trial operation, adjustments, or chemicals (at the customer's request)

Company Name

Prod

uct/T

echn

olog

y O

verv

iew

Features

・ Backwashing is unnecessary: Solid-liquid separation of and self cleaning are performed at the same time bycontinuous rotation of the contiguously placed oval plates between slits. Stable processing capability:Cleaning the screen section will not reduce processing capacity due to clogging.・ Large transport capacity: Automatic transport of separated solids by rotation of the elliptical plate group.・ Maintenance: Because of its simple structure, maintenance is easy.

Keywords Waste water treatment, solid-liquid separation device, impurities removal, screen, concentrator,dehydrator, concentration/dehydrator

pressure

pressure air cylinder

Dehydrated cake

Separating liquid

Rotating oval plate

KENDENSHA Co., Ltd.CF screen device (CF-503)

PriceInstallation area 850 × 424 mm

Processing amount 25 m3/h

CostOperating time 8h × 20days × 12 months × 3 years = 5760 h



dvan

tage



overseas)

Det

aile

d In

form

atio

n ab

out P

rodu

ct/T

echn

olog

y

Details

Capabilities

Life cycle

Remarks


Product/ Technology

Other fees may occur for trial operation, adjustments (if there is a request from customers)

Company Name

Prod

uct/

Tech

nolo

gy O

verv

iew

Features

* It is the most suitable equipment for rough screening and primary separation.* Structure that does not clog.* It is compact and can process a large volume* It's possible to operate continuously.

Keywords Waste water treatment, solid-liquid separation device, impurities removal, screen

KENDENSHA Co., Ltd.

Concentrated dehydration system (clean saver)

Price

Cost

We can recommend the machine size according to customer's situation.



dvan

tage



overseas)

Det

aile

d In

form

atio

n ab

out P

rodu

ct/T

echn

olog

y

Details

Capabilities

Lifetime

Remarks


Product/ Technology

Other fees may occur for trial operation, adjustments (if there is a request from customers)

It depends on waste water throughput and processing conditions.

Company Name

Prod

uct/

Tech

nolo

gy O

verv

iew

Features

We supply a complete system including equalizing tank, reaction tank, thickener/dehwaterer, lowerwater tank* It's possible to operate continuously at a low cost by using solid liquid separator - KDS Separator -another product that we developed.* It has excellent cost performance due to small total electric capacity.* It's possible use it as a mobile machine because is small and it can be mounted on a car.

Keywords Waste water treatment, solid-liquid separation device, dehydration system

6. JFE Plastic Resource Corporation

Company Name JFE Plastic Resource Corporation Company Name (EN) JFE Plastic Resource Corporation President Nozomu TamuraAddress 5-1 Mizuecho, Kawasaki-ku, Kawasaki, Kanagawa Pref. 210-0866Contact 044-299-5193Capital 90 million yenNo. of Employees 76E-mail Use online inquiry form Website http://www.jfe-plr.co.jp/en/index.html

Japan:Overseas: NoneRecycling of plastic containers and packaging

NF boardPellets

Com

pany

/ O

rgan

izat

ion

Info

rmat

ion

Branches/Agencies


Busin

ess A

ctiv

ities

, Mes

sage

s and

Oth

ers

BusinessActivities

Message/Other

Examples ofProducts

2 domestic offices (Kawasaki & Fukuyama, Hiroshima Prefecture)

Sales of technologies/equipment related to plastic recycling and the sales ofrecycled plastic products

JFE Plastic Resource Corporation contributes to the creation of resourcerecycling-oriented society through our plastic container and packaging recyclingbusiness.Plastic containers and package that were separated from household waste andcollected by municipalities are recycled through chemical recycling (blast furnacefeed materials) and material recycling (production of pellets and NF boards).

JFE Plastic Resource Corporation NF Board

Price

Approximately 200,000 sheets per year

Cost No additional costsDepending on the intended use, long-term use is possible

There may be deterioration due to ultraviolet ray, changes in color,temperature expansion / contraction (linear expansion),

Others → Good wear resistance, heat insulation, sound insulation, workability

Adv

anta

ges

Patent and awardhistory

2004 Eco Products Award Promotion Council Chairman's Award Winner, 2008 EnvironmentalGreen Purchasing Specific Procurement Goods, 2010 Ministry of Land, Infrastructure andTransport NETIS registration, 2010 ISO 14024 - 'Eco Mark' accreditation, 2015 compliant withISO 14021 -'Ecolabel type II, 2010 Kawasaki low CO2 pilot brand certification, 2014 Kawasakimechanism authentication ... others


overseas)

Tochigi prefecture livestock dairy research center inner wall, Inner wall of a certain racehorse largetraining area, Seiryu farm: inner wall of barn, Shin Yamaguchi Station wall greenification base, Tokyo Metro Fukutoshin Line Frame, Chubu Electric Power Co., Ltd. Kawagoe Thermal PowerPlant Formwork,Hokuriku Shinkansen vehicle base formwork, Tokyo Metropolitan Road Signs Foundation Frame,Sendai subway Tozai line waterproof sheet base, materials for hydroponic cultivation, materialsused to protect the bottom of storage inside fishing boats ... and others.

Det

aile

d In

form

atio

n ab

out P

rodu

ct/T

echn

olog

y

Details

Capabilities

Life cycle

Remarks


technologies

[NF12] Dimension: 600 mm × 1800 mm, thickness: 12 mm, weight: 9.5 kg, 100 sheets/package[NF 4] Dimension: 600 mm × 1800 mm, thickness: 4 mm, weight: 4.0 kg, 200 sheets/pallet

* Depending on the result of bidding by the Container and Packaging Recycling Association (1x annually)

Product/TechnologyCompany Name

Kawasaki Green Innovation Cluster Product/ Technology Information

Animal husbandry → Good bacterial growth resistance, water resistance, chemical resistance, detergency

Mold form → Good corrosion resistance, good releasability, easy diversion, economical and environmental condition

Ove

rvie

w o

f Pro

duct

/Tec

hnol

ogy

Features

Recycled plastic board made from used plastic household waste

KeywordsPlastic containers and package recycling, Recycled plastic board,Two types of three layer boardEnvironmentally-friendly products, resource recyclingList price: NF 12: 2,980 yen per sheet, NF 4: 2,380 yen per sheet

7. Geostyle Co., Ltd

Company Name Geo-style Co., Ltd.Company Name (EN) Geo-style Co., Ltd.President Akira KuwabaraAddressContact 044-819-8229 / 090-3311-5001Capital 4 million yenNo. of Employees 1E-mail [email protected] www.geo-style.jp

Japan: 1 domestic officeOverseas: None

Com

pany

/Org

aniz

atio

n In

form

atio

n

Branches/Agencies

6-7-19-2 Mizoguchi, Takatsu-ku, Kawasaki City, Kanagawa Prefecture, 213-0001


Busi

ness

Act

iviti

es, M

essa

ges a

nd O

ther

s

BusinessActivities

We promote and sell SMEs' innovative technologies, especially environmentaltechnologies, products, and services to domestic and overseas markets.Developingcountries face many issues, such as pollution, that must be resolved as a society. Duringits period of rapid growth, Japan too faced such issues, but with the improvement ofenvironmental technology, Japan has managed to resolve these problems and continues todevelop and improve this technology. We also want to do our part in making the world abetter place and contribute to societies overseas through environmental improvement andenergy saving by applying this environmental technology. There are many wonderfultechnologies of small and medium enterprises, but in many cases they cannot share theirtechnologies with the world because of financial difficulties, difficulty with the process ofbringing businesses and technologies into other countries, or difficulties finding contactsor business partners.We hope to help advise and offer services to achieve success withthese technologies, products, and services overseas. There are many products and servicesthat are common here, but rare or nonexistant in other countries, for which we can help todevelop business overseas. In Japan, we are doing business in designing biotopes/rainwater circulation control/monitoring systems and selling filtration system.

Message/Other

Examples ofServices

Products: RO water purifier (made in Taiwan), ultra low frequency scale · slime removalsystem BacComber (made in Singapore), Bacillus bacteria wastewater treatment systemAT-BC, heat exchange paint Tough Coat, portable bottle water purifier Seychelle SurvivalBottle (made in USA) Fire extinguishing equipment (laxy, toss-out), fiberized syntheticresin paving agent (water permeable pavement), fat decomposition nano detergent, highspeed powder coagulant OIL FLOCK, nanobubble dissolution apparatus ADDOX(wastewater treatment, use in aqua farms), Eco-sugi Bio planting material, non-hydrolyzedphosphorescent paint, and filtration devices.

We are joining with partners in the Philippines for promoting Japanese and Taiwanesetechnologies. We are also interested in the countries such as India, Malaysia, Vietnam,Myanmar, Indonesia and others. We would like to utilize ODA. In Japan, we areexpanding sales of scale/slime removal system for cooling towers and boiler water whichutilizes Ultra Low Frequency (ULF) technology as an agent of a Singaporeanmanufacturer.

8. Shinoda Co., Ltd.

Company Name SHINODA Co., Ltd.Company Name (EN) SHINODA Co., Ltd.President Representative Director Atsuhiko Shinoda

Address

Contact (Head office) 058-214-3495 (Tokyo branch) 03-6192-9175Capital 30 million yenEmployees 157E-mail tokyo@[email protected] http://www.gifu-shinoda.co.jp/en/

Japan: 5 offices (Gifu, Tokyo, Yokohama, Kyoto, Fukuoka) Overseas: None

Com

pany

/Org

aniz

atio

n In

form

atio

n

(Head Office) 2-2 Tatsutamachi, Gifu-shi, GIFU 500-8402(Tokyo Branch) TK88Bldg., 1-45-3 Higashiikebukuro, Toshima-ku, Tokyo

Branches/Agencies


Busin

ess A

ctiv

ities

, Mes

sage

s and

Oth

ers

BusinessActivities

【Head Office】Sales and repairment of civil engineering materials/construction machinery,civil engineering work, steel construction, painting work, electricconstruction, landscaping construction.【Environment Division】Sales and proposals for environmental products/ renewable energy systems.Sales of disaster-prevention goods.☆ Domestically, we propose environmental products/energy conservationsystems utilizing state-of-the-art technology from foreign countries (such asGermany). These systems make use of the characteristics and power of nature,and are used to support the creation of communities where locally producedgoods are consumed locally.

Message/Other

(Request for Collaboration)· Wood chips required for our gasification power system need to be pre-driedwhen they have the high moisture. We are hoping for proposals from acompany that has a good chip-drying equipment.· We are also looking for assistance in design and engineering related toinstalling a water wheel for small-scale hydraulic power generation, includingwaterwas, pipings, and controls.

Examples ofProducts

Wood biomass gasification power systemORC (organic Rankine cycle) waste heat power generationSmall hydropower systemWooden soundproof wallMobile and portable solar power systemWind power systemOther disaster prevention goods (compact & portable small hydraulic powergenerator, "elevator chairs" containing emergency supplies, portable waterpurifier, storage battery)

SHINODA Co., Ltd.

Price

Electric output 100 to 150 kW / hHeat output 265 kWth / h

Cost

23 units are in operation in Italy and Germany

Product/Technology Wood biomass gasification power system Company Name


Ove

rvie

w o

f Pro

duct

/Tec

hnol

ogy

Features

Small scale gasification power system using wood chips as a raw material.The required amount of dry wood chips is 880 tons per year, which means thatelectricity (150 kW/h) and heat output (265 kWth / h) are generated byinputting chips of 110 to 150 kg/h.

Keywords

1. Environment: Effective utilization of wood chips, CO2 reduction, forestmaintenance.2. Economy: Electricity sales (FIT), cost reduction, easy maintenance3. Other effects: Revitalization of forestry, creation of employment, circulation ofregional economy150 million yen/unit

Adv

anta

ges Patent and award

history Patent, TÜV certification

Example of use(Domestic and

overseas)

Det

aile

d In

form

atio

n ab

out P

rodu

ct/T

echn

olog

y

Details Complete system (wood chip dryer, gasifier, gas filter, cooler, gas engine,exhaust gas heat exchanger, generator)

Capabilities

Running costs (chip purchase cost, maintenance fee, replacement parts fee,personnel cost, ash treatment cost, operating electricity etc.)

Life cycle It is necessary to replace parts as needed after the prescribed operation time, inaddition to regular maintenance.

Remarks A third-class electric chief engineer is required


technologies

9. Soushow Co., Ltd

Company Name SOUSHOW Co., Ltd.Company Name (EN) SOUSHOW Co., Ltd.President Representative Director Hideyasu AokiAddress 3895 Nogawa Takatsu Ku, Kawasaki city, KanagawaContact 044-788-8521Capital 10 million yenNo. of Employees 20E-mail [email protected] http://www.soushow.co.jp/en/home

Japan: Yokohama BranchOverseas:

High-transparency thermal barrier film X-3

Com

pany

/Org

aniz

atio

n In

form

atio

n

Branches/Agencies


Busin

ess A

ctiv

ities

, Mes

sage

s, an

d O

ther

s

BusinessActivities

Message/Other

Examples ofProducts

To a better life with glass film.With this motto, we have used various films from our company is found in 1976.We have acquired ISO 9001 and the president has served as a JIS standardmember for building and residential glass films and has built the foundation forthe development of the Japanese film industry.We are expanding our business year by year so that we can respond to customers'wide range of needs.For example, we cooperated with the manufacturers to develop a "glass coverfilm" that can be constructed from the outer surface of the window glass asrequested by JR West after incidents where falling rocks caused Shinkansenbullet trains' window glass to break, we received a request to develop "GlassCover Sheet" which is applied to the outside of the glass. We developed this incollaboration with a manufacturer and it was adopted for installation on manytrains of JR West and the JR Tokai local line.We are proud that we are the leading firm for automotive film, with a top sharein the domestic market.According to global efforts to protect the environment in recent years, the heatshielding efficiency of "Ecofilms" has received much attention and has becomean important building material that is essential for controlling carbon dioxideemissions.

Contents of businessSales and installation of residential and commercial glass, film and automobileglass, filmCar wrappingManagement of car wash facility

Business activitiesOverseas achievements: Sales and construction of highly transparent thermalbarrier films in Maldives, Philippines, etc.

SOUSHOW Co., Ltd.High-transparency thermal barrier film "X-3 series"

Price

CostLife cycle The warranty period is three years from the date of installation.Remarks

X-3 film structure Photograph of installation

Office in Maldives Car dealership showroom in the Philippines

Product/ TechnologyCompany Name


Prod

uct/T

echn

olog

y O

verv

iew

Features

High transparency thermal barrier film "X-3 series" (X-3, HX-3) is a film affixedto the windows of buildings and has high visible light transmission, so it does notdetract from the exterior of the building. It can be used for sun control as it cutsmore than 99% of ultraviolet rays, and it also prevents glass from scattering in thecase of glass breakage in a disaster.

KeywordsThere is a special metal layer on the outer surface of the film, drastically cuttinginfrared light (from sunlight) which is the cause of room temperature rise.


Adv

anta

ges

Example of use(Domestic and

overseas)

Det

aile

d In

form

atio

n of

Pro

duct

s/Tec

hnol

ogy

DetailsBy affixing the film to the window glass, we can greatly reduce the feel of solarheat on the window side, improve comfort and cooling efficiency, save energy, cutpeak and reduce emission of CO2.

Capabilities

An Environmental Technology Verification project promoted by the Ministry ofthe Environment found that the air conditioning energy usage in the Tokyometropolitan area (June - September) was reduced by approximately 24% in officebuildings and 6% in residences.


technologies

High transparency shielding heat film

Glass

Reflection

Transmission

Cut

Ultraviolet

Visible ray

infrared rayVisible ray

10. Device & System Platform Development Center Co., Ltd.

Company Name Device & System Platform Development Center Co., Ltd.Company Name (EN) Device & System Platform Development Center Co., Ltd.President Itaru (Ike) Hatano

Contact 044-201-9030Capital 51.5 million yenNo. of Employees 23 (including temporarily transferred and contract employees)E-mail [email protected] http://www.dsp-c.co.jp/

Japan: 1 officeOverseas: None


Examples ofProducts

Busin

ess A

ctiv

ities

, Mes

sage

s and

Oth

ers

Com

pany

/Org

aniz

atio

n In

form

atio

n

Branches/Agencies

We are developing an ultra-low power consumption data collection system to meet theneeds of smart edge computing.Specifically, we are developing energy harvesting technology to create self-powering(battery free) technologies, ulta-low power consumption devices and circuits, and othercomponents and are adding AI and security functions to them. By promoting socialimplementation of a data collection system adapted to various applications, we aim tospread and expand into the IoT market. In order to spread the use of data terminals, weare operating the Edge Platform Consortium, to promote edge computing platforms.

We are monitoring equipment that rotates (such as motors) using the vibration sensorthat we are developing to try and predict abnormalities and failures (soundnessdiagnosis). We believe that this new technology will be able to contribute to reducingequipment maintenance cost.

In addition, we are developing power generation technology (energy harvestingtechnology) using vibration energy, which makes battery replacement unnecessary,contributes to ease of maintenance, and conserves energy.

・Predictive diagnostics system for equipment such as motors Vibration data is collected and equipments' abnormalities are detected using analysis

software.

・Consulting for the introduction of IoT edge systems (a system using various sensors tocollect and analyze data)　－　Predictive diagnostics for failure of equipment in factories　－　Wireless factory production information terminals　－　Facility management using low-power, wide-area (LPWA) wireless technology　－　Wireless environmental information collection (factory, infrastructure, agriculture)　－　Battery-less (energy harvesting) IoT devices (sensing devices, etc.)

BusinessActivities

Message/Other

Address Solid Square East Tower 10F, 580 Horikawa-cho, Saiwai-ku, Kawasaki-City, Kanagawa212-0013, Japan

Device & System Platform Development Center Co., Ltd.Data collection terminal system for IoT

Price

CapabilitiesCost

Life cycle

Company NameProduct/ Technology

Kawasaki Green Innovation Cluster Member InformationA

dvan

tage

s

Examples of uses(Domestic and

overseas)

We are monitoring the operating status of equipment that rotates (such as motors)using the IoT data collection terminal system based on vibration sensors to predictabnormalities and failures (soundness diagnosis). This will contribute to reducingequipment maintenance cost.We are also developing vibrational energy generators (energy harvestingtechnology) to eliminate the need for battery replacement, simplify maintenance,and conserve energy.IoT, data terminal, failure sign diagnosis, vibration sensor, vibrational energygeneration, energy harvesting

We are conducting R&D on IoT data collection terminal system technology, high-efficiency energy harvesting technology (broadband vibrational energy generation,radio wave power generation), and ultra-low energy consumption sensor modulessponsored by NEDO (national project)


Det

aile

d In

form

atio

n ab

out P

rodu

cts/T

echn

olog

y

Details


technologies

Remarks

Characteristics

Keywords

Ove

rvie

w o

f Pro

duct

/Tec

hnol

ogy

・In a demonstration experiment, large-scale/long-distance LPWA wireless deviceswere shown to be effective.・Technology developed as a commission for the City of Kawasaki WaterworksBureau and NEDO is being evaluated for practicality.

Data collection terminal system for IoT with sensors, wireless, power, andmicrocomputers integrated

Example: Motor failure predictive diagnosticsVibration data is colelcted, FFT analysis is performed using

software to detect abnormal values

11. Deloitte Touche Tohmatsu LLC

Company Name Deloitte Touche Tohmatsu LLCCompany Name (EN) Deloitte Touche Tohmatsu LLCPresident Kohei KanAddressContact Public Sector Advisory ODA/Infrastructure Business Strategy TeamCapital 901 million yenNo. of Employees 6,631E-mail [email protected] www.deloitte.com/jp

Japan: 40 offices

Overseas:Com

pany

/Org

aniz

atio

n In

form

atio

n

Shinagawa Intercity Building C, 2-15-3 Konan, Minato-ku, Tokyo 108-6221

Branches/Agencies Dispatch representatives in Deloitte member firms in 50 cities that

have network firms in over 150 countries and regions in the world


Busi

ness

Act

iviti

es, M

essa

ges a

nd O

ther

s

BusinessActivities

Accounting audit, internal audit/internal control, IPO support, Japaneseenterprise overseas expansion support, CFO service, crisis management, M&Aadvisory, risk management, compliance management, fraud/dispute support,BCP/BCM (Business continuity management) formulation, corporategovernance, CSR/sustainability/integrated report, pension consulting,regulatory services, assurance services, asset managementcompanies/institutional investor services, public services

Message/Other

Deloitte Touche Tohmatsu Limited is engaged not only in auditing andattestation services but also in offering a wide range of services to meet diverseneeds of economic society and clients.In overseas advancement support services, we support project promotion withthe various services based on the experiences on circumstances in developingcountries, ODA projects, business development such as planning feasibilitystudies, implementation, establishment of local offices and systems, businessrisk management, business development, and other close support for thecustomer.Additionally, through utilizing the abundant achievements of governmentconsigned projects, we will reduce the workload of small and mediumenterprises by supporting the documentation and business coordination ofvarious reports etc. when conducting surveys utilizing public funds.

Examples ofServices

■ JICA Small and Medium-Sized Enterprise Overseas Development SupportSupport for preparing proposals for overseas development support schemes forproducts and technologies that can contribute to solving development issues indeveloping countries, reviewing business models, implementing feasibilitystudies, project investigation and diffusion demonstration, implementation ofproject management.■ Advisory service related to basic marketability research for large-scaleinfrastructure manufacturersAdvisory services and information collection about the conditions indeveloping countries, market research, and competitors.

Deloitte Touche Tohmatsu LLC

Reference price

Service Consulting business on overseas deployment support project for JICA Small andmedium enterprises

Company Name

Kawasaki Green Innovation Cluster Service InformationO

verv

iew

of S

ervi

ces

Features

We support the implementation of proposals for JICA overseas developmentsupport schemes for small and medium enterprises with products and technologiesthat will contribute to the development problems of developing countries andimplementation of projects after adoption.In addition to smoothly implementing the JICA project by utilizing our experiencewith consigned projects of government agencies, we also utilize our knowledge asDeloitte professionals to provide necessary services such as examining businessmodels for after the completion of the JICA project and compliance withregulations, establishing the procedures of local offices, and creating internalmanagement systems.

Keywords Various services by professionals familiar with circumstances in developingcountries, ODA projects, and business development

Det

aile

d In

form

atio

n ab

out S

ervi

ces

Service Details

Adv

anta

ges

Achievements

JICA (1st Round) 2016 Project to support overseas expansion of SMEsVerification Survey with the Private Sector for Disseminating light hydroelectricpower generator for improvement of living standard in rural Himalayan areas ofNepalAdditionally, 4 feasibility surveys and 1 other verification survey were adoptedand we are supporting their implementation.

Infrastructure maintenance (Indonesia), urban environment improvement(Philippines), organic agriculture/food manufarturing technology (Laos)

Support with implementation of project- Investigate about business practices, security, geographical

constraints, lifestyle, resources, infrastructure, and risk analysis- Market research, product and service demand survey, local

partner, support for selecting collaborators- Demonstration implementation support- Support with various types of documentation

Step 2

Support for Information gathering·

Surveys, Verification Surveys

Step 4

Continued Business Support

Business continuation support in emerging and developing countries- Business risk management support- Supportt for business planning and profit structure

reconfiguration- Support for formulation of reduction/expansion plan

Step 1

Support with project proposals and

planning

Support creating project proposals and planning- Clarify the position of overseas business development project in

the enterprise, support for strategy review- Coordinate domestic and overseas business activities- Provide basic information on emerging countries (policy, tax

system, economic overview, legal system etc)- Develop storyline for proposal

Step 3

Support for Business Development

Business development support after the project - Support for the establishment of local offices /affiliates- Labor support- Production/service, support for establishing organizations for

sales expansion - Support for planning exhibition, publicity, marketing plan

12. Nakasho Co.,Ltd

Company Name NAKASHO Co., Ltd.Company Name (EN) NAKASHO Co., Ltd.President Tatsuo NakashimaAddress 1-8-6 Minamikase, Saiwai-ku, Kawasaki City, Kanagawa PrefectureContact 044-599-2955Capital 10 million yenNo. of Employees 60E-mail [email protected] http://www.my-nakasho.co.jp/

Japan: 4 domestic offices in Kawasaki CityOverseas:

Com

pany

/Org

aniz

atio

n In

form

atio

n

Branches/Agencies


Busin

ess A

ctiv

ities

, Mes

sage

s and

Oth

ers

BusinessActivities

Message/Other

Examples ofServices

We are conducting a survey project of advanced resource recycling utilizing IOT inin Kawasaki City. This survey project is an initiative to utilize IOT and lead thewaste disposal/recycling industry in reducing carbon emissions. We would also liketo make efforts to develop the industry while utilizing the infrastructure amassed inKawasaki Eco Town as much as possible.

・Industrial waste disposal businessOur company was founded over 50 years ago. We have waste incineration,dehydration and crushing facilities in Kawasaki city to respond to a wide varety ofindustrial waste. We are developing a wide range of business from collection andtransportation to disposal from industrial waste to specially controlled industrialwaste.

13. Niihama Iron Works Co., Ltd.

Company Name NIIHAMA IRON WORKS CO., LTD.Company Name (EN) NIIHAMA IRON WORKS CO., LTD.President Representative Director Kensuke MorizaneAddress 208, Sousaku, Yokonemachi, Obu,Aichi Contact 0562-48-2255 Capital 10 million yenNo. of Employees 38 (as of Nov. 2017)E-mailWebsite www.niihama.co.jp/e/

Japan: Head office and 1 other office (sales office: Tokyo)Overseas: None

Com

pany

/Org

aniz

atio

n In

form

atio

n

Branches/Agencies


Busin

ess A

ctiv

ities

, Mes

sage

s and

Oth

ers

BusinessActivities

Since our company was founded in 1964, we have operated in designing andmanufacturing machinery for heavy and chemical industries.We have a machine and metalworking factory, and can provide services ranging fromdesign to manufacturing equipment, in accordance with the customer's request.We are proud to be an industry pioneer-- our Lion shredder is used for local municipalitiesfor crushing bulk waste for private waste disposal companies or local governments.We also design and manufacture peripheral equipment such as trommel, vibration sieve,conveyor, etc.We have extensive experience and our known for our machines with large and medium-sized castings.

Message/Other

Niihama Iron Works has 80 years of experience.Through the supply of industrial machinery fields and environment-related equipment, wehave supported industrial infrastructure.We aim to respond to changing needs and continue to contribute to society through ourbusiness.Currently, through a JICA SME overseas business development support project, we arecarrying out a basic survey to contribute to solving the waste management problem inIndonesiaIn this JICA project, we are looking for the waste disposal companies and engineeringcompanies to cooperate so we can propose a whole recycle loop.

Examples ofProducts

■ Products / Technology· 2-axis crusher (electric motor direct connection type)· Small size to large size· Inverter specification: can instantaneously generate 200% crushing force by control· Use for waste wood and food residue biomass· Belt conveyor, apron conveyor· Trommel rotary sorting machine etc.■ Technical service· Designing, manufacturing and construction· Maintenance such as blade changes(The crushing blade is a structure that can be exchanged at the site, so maintenance andmanagement are easy and low cost)

NIIHAMA IRON WORKS CO., LTD.Two axis crusher

Price· Size of crushing chamber: 351 × 366 mm to 1090 × 1914 mm· Motor capacity × number of devices: 3.7 kW × 1 to 110 kW × 2 units· Blasting blade thickness: 14.8 to 90 mm

Cost We will provide quotations after considering the specifications.Life cycleRemarks

· Crushing machine

· Inverter · Crushing blade

Units sold: Over 400 units (leading in this industry)Also sold to customers overseas, in places such as Korea, Vietnam, and Indonesia

Details

Capabilities

It depends on the object to be crushed.


technologies

Detailed specifications will be determined after consultation, based on the materials,size of the objects to be crushed, and the desired particle size after crushing.


Product/ Technology

· Zoom in image of crusher (crushing a motorcycle)

Customers: Local governments, major plant manufacturers, various manufacturers, etc.

Company Name

Ove

rvie

w o

f Pro

duct

/Tec

hnol

ogy

Characteristics

· The power source is an electric motor and is extremely easy to operate and maintain.· Its powerful lion drive synthesizes the output of two geared motors, making itpossible to obtain large crushing power with a small motor.· Inverter specifications: 200% crushing force can be instantaneously generated· Crushing blade uses strong and durable special steel jointly developed with blastfurnace manufacturer· Since the crushing blade can be exchanged on site, maintenance is easy andinexpensive.

KeywordsTwo axis crusherElectric motors, inverters, tough and durable crush bladeMaintainance is easy and inexpensive

Adv

anta


historyExamples of uses

(Domestic andoverseas)

Det

aile

d In

form

atio

n ab

out P

rodu

cts/T

echn

olog

y

14. Nippon Thermoener Cc., Ltd.

Company Name NIPPON THERMOENER CO., LTD.Company Name (EN) NIPPON THERMOENER CO., LTD.President President and Representative Director Masato FujitaAddress Shirokanedai Bldg., 3-2-10, Shirokanedai, Minato-ku, Tokyo 108-0071Contact 03-6408-8251Capital 491.4 million yenNo. of Employees 401E-mail [email protected] www.n-thermo.co.jp

Japan: 45 offices, 2 plants

Overseas:


Solutions Office： Boilers for large enterprises and engineering

We are making an effort to contribute to society by creating productsto reduce C02 emissions. We have an extensive lineup of products andmake proposals with the client's needs in mind.

Examples ofservices

Busin

ess A

ctiv

ities

, Mes

sage

s and

Oth

ers

Com

pany

/ Org

aniz

atio

n In

form

atio

n

Branches/Agencies

Business Activities

Message/Other

Thailand: NIPPON THERMOENER(THAILAND）CO.,LTDand many overseas distributors

General office: Domestic boiler sales and maintenance throughdistributors

NIPPON THERMOENER CO., LTD.Services and consulting support related to boilers

Reference price

Company NameServices

Kawasaki Green Innovation Cluster Member InformationA

dvan

tage

sD

etai

led

Info

rmat

ion

abou

t Ser

vice

s

Features

Keywords

Ove

rvie

w o

f Ser

vice

s

Achievements

・Low Carbon Support Project through City-to-City Collaboration betweenOsaka and Ho Chi Minh・Low Carbon Support Project through City-to-City Collaboration betweenOsaka and Quezon・Energy saving equipment implementation in a beer factory in Vietnam・Heat Only Boiler implementation in Horlivka, Ukraine

Service Details

Consulting support for switching to low-carbon boilers in developingcountries

Boilers, high-efficiency boilers, hybrid boiler systems

high-temp water boiler heat pump

thermal fluid

Nippon Thermoener: Types of heat sources machines

hot water heater (vacotin heater)

steam boiler (water tube, flue, once-through)

heat pump

high-temp

watersteam boiler

hot water

thermal fluid

Types of heat source machines and temperatures

Steam boilers have a temperature range that allows it respond to various needs, but its running cost is the highest

15. Tepia Corporation Japan

Company Name Tepia Corporation JapanCompany Name (EN) Tepia Corporation JapanPresident GUO JunAddress 31F Shiroyama Trust Tower, 4-3-1, Toranomon, Minato-ku, TokyoContact 03-6721-5505Capital 70 million yenNo. of Employees 24E-mail (Please contact us from the inquiry form on our homepage)Website http://www.tepia.co.jp/english/

Japan: 2 domestic offices (Osaka, Tokyo)Overseas:

1. Trading Service

Com

pany

/Org

aniz

atio

n In

form

atio

n

Branches/Agencies


Japan Tepia - a main company of Tepia Group - has acted as an Asian business partnersto businesses representing Japan. We offer a wide range of services, such asconsulting/M&A advisory, global warming countermeasure projects, overseas businessexpansion support, and product sales agency/technology, with which we can coordinateto serve as a bridge to various regions in Asia. We have provided these services forover 10 years.

Group companies in China (Shanghai, Beijing), partners in Southeast Asia countries

Busin

ess A

ctiv

ities

, Mes

sage

s and

Oth

ers

BusinessActivities

Message/Other

Examples ofServices

Investigation of business partner candidates (external network resources), intermediarynegotiation with outside parties, and sales representation support

2. Consulting & think-tank servicesIn addition to the order-made consulting services utilizing corporate budgets, weprovide survey and consulting services utilizing public policy such as JICA SMEoverseas expansion support project (promotion surveys, feasibility surveys, verificationsurveys for the dissemination of Japanese technology) and bilateral credit (JCM)system.

Under the theme of "integration of think-tank and trading company functions," wespecialize in the field of environment and energy conservation, and in addition toresearch and consulting services, we also offer complete services for overseas businessexpansion, such as finance in the overseas business support phase, formation ofcommercial and logistics schemes, corporate overseas to consistently support businessdevelopment.

In particular, we have many researchers and consultants who specialize in Asia and areproficient in the languages of China, Thailand, Vietnam, etc. We are confident in ourability to collect and coordinate of high-quality local information (especially waste,domestic wastewater, industrial wastewater, energy saving field) utilizing the networkof local partners in Southeast Asia. We have successfully handled approximately 1,000overseas surveys and consulting projects for clients including governments, privatecompanies and private enterprises.

Tepia Corporation JapanOverseas expansion support services (trading, surveys, consulting)

2. Consulting & think-tank services

China, Vietnam, ThailandReference price

Kawasaki Green Innovation Cluster Service InformationD

etai

led

Info

rmat

ion

abou

t Ser

vice

s

Service Details

Adv

anta

ges

Achievements

○ JICA (Support for Japanese SMEs Overseas Business Development, etc.)FY2016 Feasibility study on implementation of rehabilitation program using pedaled wheelchairs inThailandFY2014 Verification Survey with the private sector for disseminating Portable All-in-one TypeWater Purification System in the PhilippinesFY2013 Development of rehabilitation model and related human resources in Vietnam using pedaledwheelchairs (Grassroots Technical Cooperation Project)FY2012 Preparatory survey on BOP business on pedaled wheelchair for rehabilitation and socialinclusion of people with disability in VietnamFY2012 Preparatory Survey on BOP business on insulating firebrick cook stove with carbon funding

○ Bilateral credit (JCM)FY2016 JCM model project implementation. Introduction of energy efficient water supply system inThai milk factory (Ministry of the Environment)FY2014 JCM project feasibility study - Study for the Project on Super-High Efficiency Small Once-Through Boiler and Promotion of Associated Technologies (NEDO)FY2013 Unexpected business such as spreading technology for global warming countermeasuretechnology. (Thailand) JCM Feasibility Study: Energy saving at Industrial Estate (Ministry ofEconomy, Trade and Industry）

Service

Environment, energy conservation, renewable energy, water, waste, climate change

Company Name

Ove

rvie

w o

f Ser

vice

s

Features

1. Trading ServiceWe offer products and merchandise contributing to "Asia's prosperity" which is thephilosophy of Japan Tepia. We provide total solutions from business developmentto trading negotiation and import/export agencies throughout Asia including China,ASEAN and Southwest Asia.

We provide services such as information collection focusing on environment, waterand energy, support for business strategy planning and local office management.

Keywords

A platform for industrial solar power plants imported from China and sold in Japan

Wastewater treatment plant in Vietnam Industrial Park

Tepia Corporation JapanAssistance promoting the expansion of Japanese technology

into the Southeast Asian (including investment)

Service/Others

Environment/ Eco Solution Technology

Medical / welfare technology

Technology Marketing Mediation

Finance

Business Development F/S

Sales Agent Consulting

Sustained development of the economy in developing countries

Contribution to the Japanese economy

Global environmental protection

16. Nihon Genryo Co., Ltd

Company Name NIHON GENRYO Co., LtdCompany Name (EN) NIHON GENRYO Co., LtdPresident President and Representative Director Yasuhiro SaitoAddress 1-2, Higashida-cho, Kawasaki-ku, Kawasaki-shi, Kanagawa 210-0005Contact 044-222-5555Capital 98 million JPYNo. of Employees 68E-mail [email protected] http://www.genryo.co.jp/en/index.html

Japan:Overseas: overseas distributors· Manufacture and sale of filtration materials for water supply· Development, manufacture and sale of various special filtration materials· Manufacture and sales of golf sand, sandblast· Rehabilitation construction of water purification plant, filtration pond · Replacement work of filtration equipment, filtration material · Disaster recovery support activities· Development/design/sales of water treatment equipment · Water treatment plant engineering· Analysis of water quality, analysis and testing of filter media in use

(MOBILE SIPHON TANK)

http://www.genryo.co.jp/MST.html


Com

pany

/Org

aniz

atio

n In

form

atio

n

Branches/Agencies

7 domestic offices (Osaka, Nagoya, Sendai, Fukuoka, Takahagi, Sapporo, Tokyo) and domestic distributors

This product has the advantage that it can filter rawwater with high turbidity without causing clogs, aswould occur with membrane filtration.Sand filtration water purification device (Processing to the level of potability is possible)

(Cooperation)■ Our water treatment equipment requires 3 phase 200V power supply.We are looking for eco-friendly generation and storage equipment using naturalenergy for a collaboration.■ It can be used not only for drinking water use but also sewage treatment.It can also be used for the final treatment of wastewater derived from garbagerecycling (effluent standards).

Busin

ess A

ctiv

ities

, Mes

sage

s and

Oth

ers

BusinessActivities

Message/Other

Examples ofProducts

Portable filtration device that does not require exchanging filtration material

NIHON GENRYO Co., LtdMobile water purification device - MOBILE SIPHON TANK

Siphon cleaning, filtration material unnecessary, CO2 emission reduction, small scale water service, drinking water, multi-disaster

Price 9,340,000JPY - 40,350,000JPY (main body only)Unit type inclues siphon tank, chemical injection device (coagulant, disinfectant),pre-plumbing, control panel※ Uses 3 phase 200V power supply

Lineup: 9 types 11 models from φ 260 to φ 2200Throughput: 12 m3/day to 870 m3/day

Cost Life cycle Machine equipment: 15 years, filtering material: 30 years

It requires water quality confirmation in advance.

◆ International patent (Siphon wash, Siphon tank etc)◆ FY2013 Spring Yellow Ribbon Medal

◆ FY2005 Nationwide Invention Awards - Special Award◆ Kawasaki Manufaturing brand certification◆ Low CO2 Kawasaki brand certification2013 ODA Grant Aid for Environment (Laos Democratic People's Republic)2013 ODA Non-Project Grant Aid (Vietnam Socialist Republic)2013 JICA Feasibility Study (Republic of Mozambique)2013 JICA Verification Project (Republic of the Philippines)Domestic small scale water business entity water purification facilityWater and wastewater treatment facilities for domestic/foreign private factories

◆ FY2007 Prize of Minister of Education, Culture, Sports, Science and Technology Prize

Adv

anta

ges



overseas)

Ove

rvie

w o

f Pro

duct

s/Tec

hnol

ogy

Features

Keywords

Det

ail I

nfor

mat

ion

abou

t Pro

duct

/Tec

hnol

ogy

Details

Capabilities

Remarks


technologies

That is a water purification device for producing drinking water from a wide range of water asraw water


Education and training will be implemented at the time of introduction;this equipment is to be operated by a trained operation manager

■ Because it is portable, it can be moved to areas affected by disasters to support recovery.

■ It functions as a "movable water purification plant" when it is equipped with a generator andperipheral equipment in a truck.

It is not possible to process raw water or sea water containing heavy metals etc.

The filter uses high performance filtration material. Processing is possible evenwith raw water turbidity of around 150 NTU.Transportation costs, trial operation/adjustment fee, supervisor's guidance expenses occur

■ No need to replace filter material with patented "siphon wash" function. This reducesmaintenance and management costs.■ Filtration material is kept in a clean state at all times, water quality is stable and waterpurification ability are maintained.


17. Japan Thread Co., Ltd

Company Name Japan Thread Co., Ltd.Company Name (EN) Japan Thread Co., Ltd.President Yuichiro TsunematsuAddress Konishi Bldg. 2F, 1-6-8 Atago Minato-ku, Tokyo, 105-0002, JAPANContact 03-6759-9461Capital 8 million yenNo. of Employees 3E-mail [email protected] http://www.reterra.jp

Japan: Head office and 1 other office (Kawasaki)Overseas:

◆ Thread filtration systemCertification: Japan Water Research Center (Water Treatment, #1001)3 models (MTG: 2,800 m3/day, 44P: 700m3/day, 22P: 270 m3/day)

◆ Double Clean Filtration SystemJapanese patent (issued: April 2017), international patent (PCT) pendingBreakthrough filtration method utilizing 4 natural phenomena

◆ SUMI-NAX inorganic flocculating agentCertification pending from Japan Water Works AssociationThis product is made of natural minerals, ensuring safetyProduction is contracted out to a factory in Yantai, China, which reduces cost


Examples ofProducts

Busin

ess A

ctiv

ities

, Mes

sage

s and

Oth

ers

Com

pany

/Org

aniz

atio

n In

form

atio

n

Branches/Agencies

Japan Thread is an environmental consulting company with a head office in Minato-ku,Tokyo, established in 2009 to plan, propose, and sell low-cost, safe water treatmenttechnologies (water purifiers and flocculants) developed by Reterra, an affiliatedcompany.Japan Thread is a total distributor of thread filtration systems for municipalgovernments, and also we also plan other new products for the environmental sector. AsJapan Thread is a fabless company, these new products are outsourced formanufacturing. In 2006, the thread purification system (made in Israel) was awarded theCertification of Water Treatment Equipment from the Japan Water Research Center andhas since been adopted by 6 waterworks bureaus across Japan.

BusinessActivities

Message/Other

We are looking to collaborate with other enterprises to increase sales of our threadfiltration system, which we have experience selling to both the public and private sectorsin Japan.Our Double Clean Filtration System is still in the development stage, but we are lookingto partner with other enterprises from the current stage and develop new markets. Inparticular, we are looking to target foreign markets with both our Double CleanFiltration System and SUMI-NAX.We are also interested in sewer and water supply systems and wastewater treatmentprojects in Vietnam, Indonesia, Mongolia for JICA's "Feasibility Survey with the PrivateSector for Utilizing Japanese Technologies in ODA Projects" and "Verification Surveywith the Private Sector for Disseminating Japanese Technologies." We are looking forcompanies who would like to do business using our flocculating agents and waterpurification systems.Japan Thread has certain strengths as a startup company and we are ready andwilling to take on new challenges, so won't you work with us on a project to benefitothers?

Japan Thread Co., Ltd.Double Clean Filtration System

Price

Cost In addition to the cost of the unit: delivery fee, test-run/adjustment fee, technical guidance feeModule: 20 years (PVC models); 30 years (aluminum models)Filter: 5 years (fabric); 8 years (wound thread) ＊depending on water quality and use

Filtration capacity: starting at 10 m3/day per module. Modules can be added, making thepotential capacity limitless; Filter micron rating: thread woven filter: 0.5 -2.0 ;nonwoven fabric filter: 2.0 or more

Remarks


technologies

Adv

anta


history ■Japanese patent (issued April 2017); international patent pending


overseas)


Product/ Technology

Application for the Certification of Water Treatment Equipment from the Japan WaterResearch Center planned for 2019

July 2007 Verification experiment at water treatment plant (Yokohama)Aug. 2007 Verification experiment at water treatment plant (Nagano Pref.)Oct. 2017 Product demonstration at Intl. Plastic Fair (Makuhari Messe - Chiba, Japan)Feb. 2018 Demonstration at Kawasaki International Eco-Tech Fair 2018 (Japan)

Company Name

Ove

rvie

w o

f Pro

duct

/Tec

hnol

ogy

Characteristics

This unique filtration system is being developed utilizing four natural phenomena andutilizes newly-developed wound thread filters, which can withstand backwashing. Thismodule is proficient at pretreatment and works with high flux and accuracy. The threadwound filters (nominal openings of 2.0 ) are durable and lower the running cost.The immersion-type filtration is well-suited for treating wastewater (sewage), drainwater, and ballast water.

KeywordsThe spiral guides built into the inner wall of the modules creates a whirlpool. Passingthrough the filters installed inside the module, even water with a high turbidity can bepurified.

Size of 1 module 750 mm × 70 mm; size of 10 modules (1 unit) 120 mm × 1500 mm ×950 mm; filtration volume (1 module) 10 m3/day (in the case of purified water); module+ a control panel, pumps, solenoid valves, and a pressure tank are needed

Det

aile

d In

form

atio

n ab

out P

rodu

cts/T

echn

olog

y

Details

Capabilities

Life cycle

Japan Thread Co., Ltd.Thread filtration system (MTG-JW, MT44P-JW, MT22P-JW)

Price

Filtration capacity: 3 models with capacities from 270m3/day to 2,800m3/dayFilter uses 10 thread, and catches 99.9% of Cryptosporidium

Cost Cost of the unit + delivery fee, test-run/adjustment fee, technical guidance feeLife cycle Unit: 20 years, Filter media: 10 yearsRemarks

Filter media withnominal openings of3 and casette packs

filter media casette pack

MTG-JW (filtration volume: 2,800 m3/day, 3 filter)


Public sector: Aomori Prefecture; Hinoemata, Fukushima Prefecture; Hokuto city;Mihara city; Miyawaka city; Oketo townshipPrivate sector: Iron and steel industry, pulp manufacturers, automobile manufacturers

Maximum filtration flux: 135 m3/m2/day using 3 filter; dimensions: 4.2 m×1.0 m×1.7 m; weight (without water): 2,100 kg; filtration pressure: 0.1 Mpa; washingpressure: 0.8 Mpa; drainage volume: approx. 5 m3 each use

Adv

anta

ges


overseas)

Det

aile

d In

form

atio

n ab

out P

rodu

cts/T

echn

olog

y

Certification from the Japan Water Research Center (Water Treatment, #1001)Patent and award

history

Details

Capabilities


technologies

Ove

rvie

w o

f Pro

duct

/Tec

hnol

ogy


This filtration system is capable of removing chlorine-resistant pathogenicmicroorganisms, such as Cryptosporidium. The high-pressure washing functionremoves sedimentation from thread wound filters, which allows them to be continuallyused, rather than being used disposably, as is typical with filtration systems. Based onpressure detectors, jets are activated to wash away impurities and then return to thefiltration process. This high-efficiency filtration system can purify water in 12minutes. The running costs is low, as filter media needs to be replaced only once everyeight years (depending on the quality of the raw water).

Although Israel isn't known for making thread water filtration systems, the country'smilitary and water processing technologies are famous. By developing sprinkler anddrip irrigation technology, the country overcame its lack of water to develop itsagriculture industry.Please consult us for prices.

Characteristics

Keywords

Japan Thread Co., Ltd.SUMI-NAX inorganic flocculating agent

Price

Cost Delivery fee, test-run/adjustment fee, technical guidance fee are also incurred

SUMI-NAX for industrial wastewater

Left: Kaolin solution 5g/1 (turbidity: 5000 NTU)Right: After stirring for 2 min. and letting sit 1 min.

SUMI-NAX for general turbid water

Adv

anta

ges

Patent and awardhistory Currently, certification from Japan Water Works Association is being processed


overseas)

Det

aile

d In

form

atio

n ab

out P

rodu

cts/T

echn

olog

y

Details

Capabilities

Life cycle

Remarks


technologies

Use within 3 months of opening. (If placed in a humid location, it may be necessary toadd a dessicant to container)

Treatment of industrial effluent of optical lens and automobile parts manufacturers (inJapan); treatment of effluent from starch factories (Shandong, China); and ademonstration experiment on pretreating raw sewage and factory effluent is in progress(in Ulaanbaatar)

SUMI-NAX is not effective on all substances; it is useful for removing suspended solidsin water, but less suited for removing dissolved solids.

It has a large electric charge from the inorganic compounds, and as the catalyst is fineparticles, it even has an effect on dissolved solids to a certain extent. By using thehydroxyl group, it is even effective on substances without an electrical charge.For kaolin solution with a turbidity of 5000 NTU, 80 ppm (80 g/m3). 90% effective atremoving arsenic, fluorine, manganese, etc. (each type of water should be treatedseparately)

Product/ TechnologyCompany Name

Kawasaki Green Innovation Cluster Product/ Technology InformationO

verv

iew

of P

rodu

ct/T

echn

olog

y

Characteristics

SUMI-NAX has a large electric charge as it is a mixture of 10 types of inorganiccompounds. As it is made from inorganic compounds and does not harm the humanbody, there is no need for worry about its effects on the human body. Its reaction is fastand the floccules do not easily break up, so they can be dehydrated by centrifugalseparator or sun drying, which allows the amount of waste to be reduced.

Keywords

Within 2 minutes of adding SUMI-NAX to raw water, flocculation begins. The ideal pHof water to be treated is 5-7, but flocculation still occurs outside of that range.It is effective for the pretreatment of high turbidity water, such as is found in rivers andlakes throughout the world and wastewater treatment.

350 yen/kg (delivered from the factory in Yantai, China; if incremental taxes, min. order of 20 t)

18. Nippon Basic Co., Ltd.

Company Name Nippon Basic Co., Ltd.Company Name (EN)

President Yuichi KatsuuraAddress 2F Ujihashi Building, 2-767 Shin-Maruko-machi, Nakahara-ku, Kawasaki-cityContact 044-738-2215Capital 35 million yenNo. of Employees 3E-mail [email protected] Website www.nipponbasic.ecnet.jp/eindex.html

Japan: NoneOverseas: Distributors in Bangladesh and Indonesia

(Requests for Collaboration)

DePoManual type seawater desalination equipment


Com

pany

/Org

aniz

atio

n In

form

atio

n

Nippon Basic Co., Ltd.

Branches/Agencies

New Cycloclean Desaliclean Cycloclean Portable

Busin

ess A

ctiv

ities

, Mes

sage

table of contents · 1. mdi corporation company name mdi corporation company name (en) mdi...

Documents