table of contents - melling...4 quality timing components since 1946 tm mell-gear tensioners, guides...

Mell Gear Product OverviewMell Gear Timing Chains

Mell Gear Sprockets

Mell Gear Tensioners, Guides & Dampers

Mell Gear High Performance Timing Sets

Mell Gear product tipsWhen to replace timing components?

Timing Installation tips - What you need to know

• Timing Marks

• Free Running or Interference Engines

• Timing Chain & Sprocket Installation

• Tensioners

• Guides, Dampers & Tensioner Arms

• Timing Belts

• Gear Installation

Hydraulic Timing Chain Tensioners

• Effects of oil viscosity, oil filters & oil pressure

Automotive Application Listings

Marine Application Listings

Mell Gear High Performance Parts Warranty

Mell Gear Performance Application Listings

Mell Gear High Performance Timing Set Comparison Chart

Stock Replacement Numerical Listings

High Performance Numerical Listings

Interchange Listings

The information in this catalog has been gathered from the best available sources. Every possible effort has been made to verify accuracy. Melling Engine

Parts does not accept any responsibility for errors or omissions. We would appreciate being advised of any inaccuracies which might come to your attention.

Melling Engine Parts reserves the right to update product specifications at any time without notice.

Before installing any part listed, consult the appropriate manufacturer’s instruction manual for detailed installation instructions.

2015 Melling Engine Parts All Rights ReservedNO PORTION OF THIS CATALOG MAY BE REPRODUCED WITHOUT THE WRITTEN PERMISSION OF MELLING ENGINE PARTS

C

TM

Table of Contents

2

3

4

5

7

8

10

11

247

253

254

255

281

297

298

Mell Gear Stock Replacement Warranty

Quality Timing Components Since 1946

LIMITED WARRANTY

All products sold by Melling Engine Parts are warranted to the consumer owner for one (1) year

from the date of installation to be free from defects in materials or workmanship.

This warranty does not apply to any product that has been altered, tampered with, such as taken

apart, misused, subject to excessive operating conditions, malfunctions because of foreign

particles such as engine dirt or pieces of other deteriorating components, products used in a

vehicle that has been altered for other than intended purposes. Also, performance products are

not covered under this warranty including products used for off-road or racing purposes.

The Melling Engine Parts warranty does not consider low or no oil pressure grounds for

extensive engine repairs nor complete replacement of damaged engines. This consideration

is based on the fact that all vehicles have as standard equipment, either warning lights or

gauges, which is to warn the operator of low oil pressure, low oil level or no oil pressure

prior to the occurrence of the engine damage. If an operator chooses to ignore these gauges

or warning lights or if the gauges or warning lights are not in operating condition, this

constitutes negligence on the operators part. Therefore Melling Engine Parts cannot be

responsible for the cost of these extensive damages.

If a product fails to conform to this warranty, the product should be returned to the place of

purchase, then sent back, prepaid to Melling Engine Parts. If Melling Engine Parts determines that

this product fails to conform to this warranty, it will either replace the product or refund its original

purchase price, at the option of Melling Engine Parts.

THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER IMPLIED WARRANTY OF

MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR WARRANTY OF QUALITY,

WHETHER EXPRESSED OR IMPLIED, EXCEPT THE WARRANTY OF TITLE. ALL IMPLIED

WARRANTIES ARE LIMITED TO THE DURATION OF THE WARRANTY. THE REMEDIES SET

FORTH IN THE WARRANTY ARE EXCLUSIVE.

Some states do not allow limitations on how long an implied warranty lasts or exclusion or

limitation of incidental or consequential damages, so the above limitations or exclusions may not

apply to you. This warranty gives you specific legal rights, and you may also have other rights

which vary from state to state.

ENGINE PARTS TM

TM

MELL-GEAR offers a complete line of engine timing for all of your automotive needs.

Everything from chains, sprockets, timing gears, timing chain tensioners, guides and

dampers. We offer both three piece sets and complete timing kits for today’s modern

engines. Timing belts, belt tensioners and pulleys are also available. Besides coverage

for stock applications MELL-GEAR also offers coverage for popular high performance,

marine and industrial applications.

Quality Timing Conponents Since 1946 1

2

MELL-GEAR Automotive Timing ChainsTM

Timing components offer design and manufacturing refinements that contribute to the

accuracy of valve timing, to the durability of the chain, and to customer satisfaction. Some of

today’s modern engines use up to four different timing chains within one engine!

MG silent timing chains have generated tooth-contacting surfaces which permit smooth,

progressive engagement of load reducing chain noise. Silent chains slide against sprockets

rather than roll. This method of engagement provides a uniform velocity ratio between

crankshaft and camshaft. By minimizing chain speed variations, accurate timing is maintained.

Segmental bushed timing chain has machined broached pitch holes, hardened segmental

bushings and precision ground pins. These features assure smooth running and dependable

operation.

Most late model engines use silent chains and require a smooth surface finish to protect

tensioner arms, guides and dampers from premature wear. These chains are sometimes

referred to as having a “fine” or “hammered” finish.

Roller chain is frequently used for heavier duty applications including high performance.

We offer two types of roller chains, single and double. Roller chains feature link pins, roller

supports, support links, outer links and specially hardened rollers to withstand high speed

wear and heavy shock loads. This design lowers friction and wear on the sprockets due to the

hardened rollers which act like a bearing. These chains require proper lubrication, any grit or

debris trapped in the rollers will cause rapid wear. This type of chain produces more noise,

especially if not properly dampened.


3

MELL-GEAR SprocketsTM


Sprockets provide precise synchronization, camshaft and crankshaft sprockets are specifically

designed to be used with Mell-Gear timing chain. Material selection, sprocket design, manu-

facturing and testing procedures insure smooth, quiet, efficient performance of the drive system.

Sprockets come with visible timing marks to simplify installation.

If any one of the sprockets show damage or wear then all timing components should be

replaced to insure accurate timing. This will prevent possible damage caused by mixing new

parts with old worn parts.

Camshaft sprockets are primarily made from cast iron or powder metal. Billet steel is used for

high performance applications and are fitted with either a thrust washer or a thrust bearing for

increased performance and reliability. Camshaft sprockets also include cam sensor triggers

where required for late model computer controlled fuel management systems.

Crankshaft sprockets are made of sintered iron or steel. Because of the 2:1 ratio common to

timing drives, these sprockets have half as many teeth as the camshaft sprocket. This means

each tooth contacts the chain twice as many times as the corresponding camshaft sprocket.

For this reason crankshaft sprocket teeth are hardened to provide balance in tooth wear. Billet

steel induction hardened sprockets with multiple key-ways are often used for high performance

applications increasing performance and reliability.

4 Quality Timing Components Since 1946

MELL-GEAR Tensioners, Guides and DampersTM

Today’s late model engines use both single and dual overhead cam designs requiring complex

timing systems. As timing chains get longer they require the use of tensioners, tensioner arms,

chain guides and dampers.

Tensioners apply a specified amount of tension to the timing chain or timing belt. There are two

types of tensioners. Spring loaded tensioner using spring pressure to apply tension to the chain

or belt. Hydraulic tensioners use engine oil pressure to hydraulically operate the tensioner

applying tension to the chain or belt. Some hydraulic tensioners use an oil squirt nozzle to spray

oil onto the timing chain for extra lubrication.

Chain guides and dampers are typically fixed to the cylinder block or cylinder head providing a

smooth surface for the timing chain to ride on. They are typically made of solid nylon or

aluminum backed with a nylon surface providing support for smooth chain operation.

5Quality Timing Components Since 1946

MELL-GEAR PerformanceTM

These sets offer high quality / low cost for heavy duty or mild

performance applications. They contain double row roller

timing chains providing extra strength and durability. They are

offered with a .200” chain for small blocks or a .220” chain for

big blocks and also contain cast iron camshaft sprockets. This

is an excellent upgrade over the OE timing components.

Good = Heavy Duty, Mild Performance Sets, “402” Series

These sets contain a .250” double row roller timing chain. An

induction heat-treated billet crankshaft sprocket to extend

tooth life and 3 keyways providing +/- 4 degree crankshaft

adjustment, +/- 2 degree camshaft adjustment. Camshaft

sprockets are manufactured from ductile iron or induction

heat-treated cast iron.

Better = Entry Level or Street Enthusiast “404” Series

These sets contain a very large .334” seamless single roller

timing chain, 3 keyway crankshaft sprocket providing +/-

4 degree crankshaft adjustment, +/- 2 degree camshaft

adjustment and a cast iron camshaft sprocket.

Better = Entry Level or Street Enthusiast “405” Series

These sets contain a .250” double row roller timing chain with

a 9 keyway induction heat treated billet steel crankshaft

sprocket providing +/- 8 degree crankshaft adjustment, +/-

4 degree camshaft adjustment. Billet steel camshaft sprockets

use a bronze thrust washer or one piece thrust bearing for

increased performance and reliability. Recommended for

engines that are upwards of 600 to 700 horse power or use

heavy valve springs.

Best = Race Billet Steel “485” Series


MELL-GEAR PerformanceTM

Gears are CNC machined from billet steel and heat treated

for maximum performance. Included are precision cut idler

gears and plates, camshaft button, cam lock tab and thrust

washer where applicable. 3 keyway crankshaft sprocket

providing +/-4 degree crankshaft adjustment and color

coded dowel pin inserts providing +/-2 degree camshaft

adjustment. Part numbers with a “Q” suffix are quiet if you

don't like the simulated “blower” sound.

By changing camshaft timing, you can take advantage of

the camshaft characteristics. Retarding cam timing will

typically increase high RPM horsepower. Advancing cam

timing will typically increase low end torque.

Gear Drive = Street / Strip, “484” Series


There are more bearings in a timing chain than there are in an entire engine. Wear in chain,

sprockets, tensioners, guides and dampers means timing lag which results in poor engine

performance, fuel economy and could cause the check engine light to come on in computer

controlled applications. Common symptoms include excessive noise upon engine start up or

a rattling noise heard at engine idle speeds.

The same is true of worn, frayed or stretched timing belts and worn timing gears. Engine

manufacturers using timing belts typically specify a mileage limitation or age period for belt

replacement. Avoid costly engine damage, change your timing belt at the recommended

interval or every 72 months.

Knowing how to replace timing components correctly is just as important as knowing when to

replace them. When a timing drive system is installed correctly you’ll have the benefit of silent,

smooth operation, as well as efficient engine performance.

When one component of a timing drive system requires replacement, the entire system should

be replaced to insure accurate synchronization.

When to replace timing components?TM


Below are general installation tips to aide in using our products. These are not intended to

replace the (OEM) Original Equipment Manufacturer’s installation procedures, specifications

or technical bulletins. Always consult the latest information before performing any repairs.

Timing Marks

When replacing a timing chain or timing belt be sure to align the timing marks. Timing marks can

be found on sprockets, gears, and chain links. Depending on the application sometimes the

cylinder block and cylinder head will also be marked.

Free Running or Interference Engine, You Need To Know

First identify what type of engine you are working on. A free running or non-interference engine

has adequate clearance to prevent the valves from striking the pistons when camshaft and

crankshaft synchronization is lost. Interference engines have close tolerances allowing valves to

strike the pistons during engine operation if camshaft and crankshaft synchronization is lost.

When servicing an interference engine you must use the proper tools. The camshaft and crank-

shaft must be locked into place by using bolt, pins or stop plates to prevent damage. If either

shaft is rotated while servicing the timing system severe engine damage could occur.

Timing Chain & Sprocket Installation

Press or use a sleeve that contacts the sprocket hub to gently tap the camshaft and crankshaft

sprockets on evenly keeping them parallel while making sure the keys are properly aligned and

seated. Any excessive force applied to the components during installation will stretch and

damage the chain. Never hit a timing chain with a hammer. The pins and links are hardened and

will crack upon impact. Timing chains should be soaked in clean motor oil prior to installation.

As a timing chain wears, slack develops in the pivots of a silent chain and the rollers and supports

of a roller chain. This slack causes the chain to elongate and change its pitch. This is often called

timing chain stretch but the chain does not actually stretch. As the chain wears it causes each

link to move apart making the chain longer. It’s difficult to determine how much a used chain has

worn so they should always be replaced.

Always use a matched set of chain and sprockets. When one component must be replaced -

replace all of the components!

Tensioners

Spring type tensioners: Use a pin to hold the assembly in place during installation. The pin must

be removed to apply tension to the chain / belt after installation. Check to make sure the tensioner

assembly moves freely without binding.

Installation TipsTM


Tensioners

Hydraulic tensioners: Engine oil pressure hydraulically operates the tensioner. When installing

these tensioners make sure the passage supplying the oil to the tensioner is clear of any dirt and

sludge. Always use a new mounting gasket or O-ring as required. Insufficient oil pressure or oil

leaks at the tensioner will result in timing system failure! Some tensioners use an oil squirt hole to

lubricate the timing system so be sure they are aligned properly. If the tensioner uses a pin to

hold the assembly together during installation be sure to remove it once installed. If the tensioner

uses a ratchet mechanism do not pry the mechanism out attempting to apply more pressure on

the chain. This will damage the ratchet mechanism upon engine startup! Be sure to follow the

latest OEM installation instructions.

Guides, Dampers, Tensioner Arms

Timing chain routing is done using guides to provide support for the chain. Dampers are used to

reduce chain noise. These are generally made of solid nylon or aluminum backed with a nylon

surface and must be installed using the correct mounting bolts. Tensioner arms are typically

mounted using a shouldered bolt and should move freely to apply tension to the chain. Torque all

mounting bolts to the manufacturer’s specifications. Over-torqueing the mounting bolts can crack

and damage these type of parts.

Timing Belts

Timing belts are inside the engine and seldom thought of as part of routine maintenance. When

replacing a timing belt always check the belt for contamination from engine oil or coolant leaks.

If contamination is found it must be repaired prior to installing a new belt. Never stretch a belt over

a pulley or sprocket as this may cause damage to the cords inside the belt. Also, do not twist or

crimp a new timing belt. If the belt uses a spring loaded or hydraulic tensioner make sure to

release the pin after installation or the tensioner will not provide the correct belt tension and

engine damage could occur.

Gear Installation

Check the shaft to be sure it’s true all the way around by using a dial indicator. Check bearing

clearance, if excessive the bearings and shaft should be replaced. Make sure there is no dirt,

grit or other deposits in the teeth or bore of the gears.

To install metal gears (including aluminum) heat to about 200° F using a hot plate to heat oil or

boiling water. While hot the new gears should fit easily and freely onto the shaft. Make sure the

shaft, gear key-way and timing marks are in the correct position.

The final step is to pour oil over the gears and replace the timing cover using a new seal and

gasket. On initial startup run the engine slowly for the first 10 minutes to allow the oil to work

into the gears.

(Continued)Installation TipsTM


Gear Installation

When installing the gears by driving them on with a pipe or tube make sure it does not exceed the

diameter of the gear’s hub. The same precaution should be observed if an arbor press is used.

Proper pressure on the hub will insure alignment and prevent damage to gears, wheather metal or

fiber.

Once installed gear backlash should be checked by using a feeler gauge. Install between the

teeth of the mating gears. This measurement should not be more than .008” or less than .003” on

the gears pitch line, and should always be on the same side of the teeth. For complete accuracy,

check the gear at four different locations approximately 90° apart.

The final step is to pour oil over the gears and replace the timing cover using a new seal and

gasket. On initial startup run the engine slowly for the first 10 minutes to allow the oil to work

into the gears.

• Using the wrong oil viscosity will cause premature wear eventually causing the timing system to

fail. Hydraulic tensioners are designed to operate at a specified oil flow and pressure. A lower

viscosity oil will flow faster than a heavier oil, especially when cold. Timing chains also have very

specific lubrication requirements. Modern engines with timing chains, may have oil specifications

that only synthetic oil will meet.

• Another source of timing system wear happens when using oil filters without anti-drain back

valves. The anti-drain back valve helps keep oil in the passages leading to the hydraulic tensioner.

It does this by blocking the return oil through the filter, to the oil pan. Without oil in the passages,

it takes longer for the oil pump to pressurize the tensioner. Lack of tension prevents slack in the

timing chain from being taken up. This allows the timing chain to jerk upon startup, increasing

wear and will eventually break the chain guides and dampers.

• Oil pressure and oil flow is critical to hydraulic tensioner operation. When replacing timing

components you must make sure the following meet the manufacturers specifications.

• New or rebuilt engines. Oiling system must be properly primed before startup.

Hydraulic Timing Chain Tensioners and the Effects

of Engine Oil Viscosity, Oil Filters and Oil Pressure

• Engine oil pressure and flow at both hot and cold temperatures.

• Engine oil is filled to the correct level.

• The engine oiling system is clean. Dirt and sludge will plug the small oil passages in

hydraulic tensioners. Depending on the design some tensioners use an internal screen

or filter that will become plugged. Tensioner internal check valves will become in-operative.

(Continued)Installation TipsTM

ENGINE PARTS TM TMCYLINDER SLEEVES

A COMPANY

11

TM

Automotive Listings (Includes Industrial & Agriculture)

Marine Listings 247

AcuraAlfa RomeoAmerican MotorsAudiBMWBuickCadillacCase TractorChevroletChrysler IndustrialChryslerContinentalDaewooDaihatsuDesotoDetroit DieselDodgeDodge TruckEagleFordFord IndustrialFord TractorFord TruckGMC/C Thevy rucks & VansHenry-JHerculesHondaHummerHyundaiI.H.C. Tractor & Power UnitsI.H.C. TruckInfinitiIsuzu

12

13

14

16

18

20

33

40

40

58

59

65

66

66

66

67

68

77

83

85

98

99

100

113

130

130

131

135

136

138

138

140

142

JaguarJeepKiaLexusMazdaMercedes BenzMercury/LincolnMGMitsubishiNissan/DatsunNissan IndustrialOldsmobileOliver TractorOpelPeugeotPlymouthPontiacPorscheRenaultRoverSaabSaturnScionStudebakerSubaruSuzukiToyotaTriumphVolkswagenVolvoWaukeshaWhite PDQ TruckWhite truck

146

146

150

152

153

159

160

172

172

177

184

185

197

197

198

198

205

221

222

223

223

224

228

228

228

229

232

240

241

244

245

245

245

Mell Gear Performance 254

ACURAEngine Year Line Engine Year Line Engine Year Line

4 Cyl.1.6 (D16A1) DOHC 1986-89 11.6 (D16Y8) DOHC 1997-00 21.7 (B17A1) DOHC 1992-93 31.7 (D17A2) SOHC 2001-05 41.8 (B18C1,C5) DOHC 1994-01 51.8 (B18A1,B1) DOHC 1990-01 62.2 (F22B1) SOHC 1997 72.3 (F23A1) SOHC 1998-99 82.4(K24A2,K24Z3,K24Z3-42,-K24Z7) DOHC

2004-15 9

5 Cyl.2.5 (G25A1,G25A4) SOHC 1992-98 106 Cyl.2.5 (C25A1) SOHC 1986-87 112.7 (C27A1) SOHC 1987-90 123.0 (J30A1) SOHC 1997-99 133.2 (6VD1) SOHC 1996-97 143.2 (C32A1,C32A6) SOHC 1991-98 153.2 (J32A1, J32A2, J32A3)SOHC

1999-08 16

3.5 (J35A3,J35A5) SOHC 2001-06 17

6 Cyl. (Continued)

3.5(J35A8,J35Z6,J35Z2,J35Y-4) SOHC

2005-14 18

3.5 (C35A1) SOHC 1996-04 193.5 (6VE1) DOHC 1998-99 203.7(J37A1,J37A2,J37A4,J37A-5) SOHC

2007-14 21

LineNo. Part Title Part No Description

1 1.6 (D16A1) DOHC ENG - 1986-89 - 4 Cyl. - 75 MM Bore (INTEGRA LS,RS,LS SPECIAL-1590CC)Belt Tensioner BT326

2 1.6 (D16Y8) DOHC ENG - 1997-00 - 4 Cyl. (EL 1590CC)Belt B-0224 104 TEETH INTERFERENCE ENGINE

3 1.7 (B17A1) DOHC ENG - 1992-93 - 4 Cyl. - 81 MM Bore (INTEGRA GS-R-1678CC) VTECBelt B-0227 124 TEETHBelt Tensioner BT5262

4 1.7 (D17A2) SOHC ENG - 2001-05 - 4 Cyl. - 75.0 MM Bore (EL 1668CC) VTECBelt B-0312 104 TEETHBelt Tensioner BT5451 INCLUDES SPRING

5 1.8 (B18C1,B18C5) DOHC ENG - 1994-01 - 4 Cyl. - 81 MM Bore (B18C1 INTEGRA GS-R 1994-01)(B18C5 INTEGRA TYPE R 1997-01 1797CC) VTECBelt B-0247 126 TEETHBelt Tensioner BT5262 PULLEY

6 1.8 (B18A1,B1) DOHC ENG - 1990-01 - 4 Cyl. - 81.0 MM Bore (B18A1,B1 INTEGRAGS,LS,RS,SPECIAL EDITION)Belt B-0184 125 TEETHBelt Tensioner BT5262 INTERFERENCE ENGINE APPLICATION

7 2.2 (F22B1) SOHC ENG - 1997 - 4 Cyl. - 85 MM Bore (CL-2156CC)Belt B-0186 70 TEETH (BAL. SHAFT) INTERFERENCE ENG. APPLICATION

B-0244 112 TEETH (CAMSHAFT) INTERFERENCE ENG. APPLICATIONBelt Tensioner BT203 CAMSHAFT

8 2.3 (F23A1) SOHC ENG - 1998-99 - 4 Cyl. - 86 MM Bore (CL-2254CC) VTECBelt B-0186 70 TEETH BALANCE SHAFT; INTERFERENCE ENG.

APPLICATIONB-0244 112 TEETH CAMSHAFT BELT; INTERFERENCE ENG.

APPLICATIONBelt Tensioner BT203 TIMING BELT TENSIONER

9 2.4 (K24A2,K24Z3,K24Z3-42,K24Z7) DOHC ENG - 2004-15 - 4 Cyl. - 3.42 Bore (ILX, TSX - 2354CC)HONDA VTEC,i-VTECChain 711F 2004-2008 176 LINKS TSX; TIMING CHAIN

712F 2004-2008 62 LINKS TSX; OIL PUMP AND BALANCE SHAFTCHAIN

Crank Sprocket S937 2004-2008 23 / 34 TEETH TSXBalance Shaft Sprocket S939 2004-2008 17 TEETH TSXChain Tensioner BT5569 2004-2008 TSX; BALANCE SHAFT CHAIN TENSIONER; LOWER

BT5573 2004-2008 TSX; TIMING CHAIN TENSIONER ARMBT5574 2004-2008 TSX; TIMING CHAIN TENSIONER; RIGHT HAND

Continued on Next Page

12

ACURA (Continued)LineNo. Part Title Part No Description

9 2.4 (K24A2,K24Z3,K24Z3-42,K24Z7) DOHC ENG - 2004-15 - 4 Cyl. - 3.42 Bore (ILX, TSX - 2354CC)HONDA VTEC,i-VTEC (Continued)Chain Guide BG5570 2004-2008 TSX; BALANCE SHAFT CHAIN GUIDE; LOWER LEFT

HANDBG5571 2004-2008 TSX; TIMING CHAIN GUIDE; UPPERBG5572 2004-2008 TSX; TIMING CHAIN GUIDE; UPPER LEFT HAND

10 2.5 (G25A1,G25A4) SOHC ENG - 1992-98 - 5 Cyl. - 85 MM Bore (G25A1 VIGOR LS,GS 1992-94)(G25A4 TL 1995-98-2451CC)Belt B-0211 113 TEETH

11 2.5 (C25A1) SOHC ENG - 1986-87 - V6 - 84 MM Bore (LEGEND-2494CC)Belt B-0129 192 TEETHBelt Tensioner BT198

12 2.7 (C27A1) SOHC ENG - 1987-90 - V6 - 87 MM Bore (LEGEND L,LS-2675CC)Belt B-0129 192 TEETHBelt Tensioner BT198

13 3.0 (J30A1) SOHC ENG - 1997-99 - V6 - 86 MM Bore (CL-2997CC) VTECBelt B-0286 197 TEETH

14 3.2 (6VD1) SOHC ENG - 1996-97 - V6 - 93.4 MM Bore (SLX-3165CC)Belt B-0221 223 TEETH

15 3.2 (C32A1,C32A6) SOHC ENG - 1991-98 - V6 - 88.9 Bore (C32A1 LEGEND GS,L,LS,SE 1991-95)(C32A6 TL 1996-98 - 3206CC)Belt B-0193 196 TEETHIdler BT5268 ADJUSTER

16 3.2 (J32A1, J32A2, J32A3) SOHC ENG - 1999-08 - V6 - 88.9 MM Bore (J32A1 CL,TL 1999-03) (J32A2CL,TL 2001-03) (J32A3 TL 2004-08-3210CC) VTECBelt B-0286 1999-2003 197 TEETH

B-0329 2004-2008 197 TEETH INTERFERENCE ENGINE APPLICATION17 3.5 (J35A3,J35A5) SOHC ENG - 2001-06 - 4 Cyl. - 90 MM Bore (J35A3 MDX 2001-02) (J35A5 MDX

2003-06 VTEC-3471CC)Belt B-0286 2001-2002 197 TEETH

B-0329 2003-2006 197 TEETH18 3.5 (J35A8,J35Z6,J35Z2,J35Y4) SOHC ENG - 2005-14 - 6 Cyl. - 89 MM Bore

(MDX,RL,TL,TSX,RDX,RLX - 3471CC) HONDA VTECBelt B-0329 2005-2012 197 TEETH

19 3.5 (C35A1) SOHC ENG - 1996-04 - V6 - 90 MM Bore (RL-3575CC) VTECBelt B-0279 197 TEETH CAMSHAFT

B-0280 69 TEETH BAL. SHAFT20 3.5 (6VE1) DOHC ENG - 1998-99 - V6 - 93.4 MM Bore (SLX-3494CC)

Belt B-0303 191 TEETH21 3.7 (J37A1,J37A2,J37A4,J37A5) SOHC ENG - 2007-14 - 6 Cyl. - 90.00MM Bore (MDX,ZDX,RL,TL -

3664CC) HONDA VTEC (INCLUDES TRUCKS)Belt B-0329 2007-2012 197 TEETH

ALFA ROMEOEngine Year Line Engine Year Line Engine Year Line

4 Cyl.1961CC DOHC 1970-94 1

13

ALFA ROMEO (Continued)LineNo. Part Title Part No Description

1 1961CC DOHC ENG - 1970-94 - 4 Cyl. - 84 MM BoreChain 3DR48 48 LINKS LOWER

AMERICAN MOTORSEngine Year Line Engine Year Line Engine Year Line

6 Cyl.40 SERIES 1946-58 160 SERIES 1946-56 24 Cyl.121 1977-79 3150 (2.5) 1983-87 4151 1980-83 56 Cyl.196 OHV, L HEAD 1958-65 6

6 Cyl. (Continued)

199 1965-70 7232 1964-79 88 Cyl.250 1958-61 96 Cyl.258 1971-88 108 Cyl.287 1963-66 11

8 Cyl. (Continued)

290 1966-69 12304 1970-79 13327 ENG 1958-66 14343 1967-69 15360 1970-78 16390 1968-70 17401 1971-76 18


1 40 SERIES ENG - 1946-58 - 6 Cyl. -Chain 339 60 LINKS

2 60 SERIES ENG - 1946-56 - 6 Cyl. -Chain 339 60 LINKS

3 121 ENG - 1977-79 - 4 Cyl. - 3.406 BoreBelt B-017 121 TEETHCrank Sprocket S499 22 TEETHBelt Tensioner BT148

4 150 (2.5) ENG - 1983-87 - 4 Cyl. - 3.88 Bore EAGLE (AMC ENGINE)Timing Kit 3-3SR64S 1983-1984 KIT INCLUDES [3SR64], [S607], [S608], [BT167],

[BG337]3pc Set 3-3SR64 INCLUDES [3SR64], [S608] & [S607]Chain 3SR64 64 LINKSCam Sprocket S608 48 TEETHCrank Sprocket S607 24 TEETHChain Tensioner BT167Chain Guide BG337 1983-1984 DAMPER

5 151 ENG - 1980-83 - 4 Cyl. - 4.000 Bore (GM ENGINE)Gear Set 2542S FIBER INCLUDES [2542] & [2537]Cam Gear 2542 54 TEETH FIBERCrank Gear 2537 27 TEETHCam Thrust Plate Spacer MG221

6 196 OHV, L HEAD ENG - 1958-65 - 6 Cyl. - 3.13 Bore (1958-65 CAST IRON ENG) (1961-65ALUMINUM ENGINE) (1958-65 AMERICAN) (1961-65 CLASSIC) (1961-62 CUSTOM) (1961-62DELUXE) (1958-60 RAMBLER) (1961-62 SUPER SIX)Chain 339 60 LINKS 1" WIDE; USE W/CAST IRON ENGINE ONLY

357 1961-1964 56 LINKS 7/8" WIDE USE W/ ALUMINUM ENG ONLY365 60 LINKS 3/4" WIDE. USE W/CAST IRON ENGINE ONLY

Crank Sprocket S329 1961-1964 20 TEETH USE W/ALUMINUM ENGINE; FOR .75 INCHWIDE CHAIN

7 199 ENG - 1965-70 - 6 Cyl. - 3 3/4 Bore3pc Set 3-494S INCLUDES [494], [S388] & [S355]Chain 494 48 LINKSCam Sprocket S388 36 TEETHCrank Sprocket S355 18 TEETH

14

AMERICAN MOTORS (Continued)LineNo. Part Title Part No Description

8 232 ENG - 1964-79 - 6 Cyl. - 3.75 Bore3pc Set 3-494S INCLUDES [494], [S388] & [S355]Chain 494 48 LINKSCam Sprocket S388 36 TEETHCrank Sprocket S355 18 TEETH

9 250 ENG - 1958-61 - 8 Cyl. - 3 1/2 Bore (REBEL 1958-61) (CLASSIC 1961)Chain 349 62 LINKSCrank Sprocket S281 23 TEETH


11 287 ENG - 1963-66 - 8 Cyl. - 3 3/4 BoreChain 349 62 LINKSCrank Sprocket S281 23 TEETH

12 290 ENG - 1966-69 - 8 Cyl. - 3 3/4 Bore3pc Set 3-349S INCLUDES [349], [S412] & [S281]; INCLUDES 7/8" WIDE CHAIN;

USE AS A SET ONLY3-374SA INCLUDES [374], [S512] & [S515]; INCLUDES 3/4" WIDE CHAIN;

USE AS A SET ONLYChain 349 62 LINKS 7/8" WIDE

374 62 LINKS 3/4" WIDECam Sprocket S512 46 TEETH USE W/3/4" WIDE CHAINCrank Sprocket S281 23 TEETH USE W/7/8" WIDE CHAIN

S515 23 TEETH USE W/3/4" WIDE CHAIN13 304 ENG - 1970-79 - 8 Cyl. - 3 3/4 Bore

3pc Set 3-349S INCLUDES [349], [S412] & [S281]; INCLUDES 7/8" WIDE CHAIN;USE AS A SET ONLY

3-374SA INCLUDES [374], [S512] & [S515]; INCLUDES 3/4" WIDE CHAIN;USE AS A SET ONLY

Chain 349 62 LINKS 7/8" WIDE EXC. POLICE & FLEET374 62 LINKS 3/4" WIDE EXC. POLICE & FLEET

Cam Sprocket S512 46 TEETH USE W/3/4" WIDE CHAIN EXC. POLICE & FLEETCrank Sprocket S281 23 TEETH USE W/7/8" WIDE CHAIN EXC. POLICE & FLEET

S445 23 TEETH POLICE & FLEETS515 23 TEETH USE W/3/4" WIDE CHAIN EXC. POLICE & FLEET

14 327 ENG - 1958-66 - 8 Cyl. - 4.000 Bore (AMBASSADOR 1958-66) (CLASSIC 1965-66) (MARLIN1965-66) (REBEL 1966)Chain 349 62 LINKSCrank Sprocket S281 23 TEETH

15 343 ENG - 1967-69 - 8 Cyl. - 4.080 Bore3pc Set 3-349S INCLUDES [349], [S412] & [S281]; INCLUDES 7/8" WIDE CHAIN;




S515 23 TEETH USE W/3/4" WIDE CHAIN

15

AMERICAN MOTORS (Continued)LineNo. Part Title Part No Description



USE AS A SET ONLYChain 349 62 LINKS 7/8" WIDE EXC. POLICE & FLEET

374 62 LINKS 3/4" WIDE EXC. POLICE & FLEETCam Sprocket S512 46 TEETH USE W/3/4" WIDE CHAIN EXC. POLICE & FLEETCrank Sprocket S281 23 TEETH USE W/7/8" WIDE CHAIN EXC. POLICE & FLEET






S515 23 TEETH USE W/3/4" WIDE CHAIN18 401 ENG - 1971-76 - 8 Cyl. - 4.165 Bore

3pc Set 3-349S INCLUDES [349], [S412] & [S281]; INCLUDES 7/8" WIDE CHAIN;USE AS A SET ONLY

3-374SA INCLUDES [374], [S512] & [S515]; INCLUDES 3/4" WIDE CHAIN;USE AS A SET ONLY

Chain 349 62 LINKS 7/8" WIDE EXC. POLICE & FLEET374 62 LINKS 3/4" WIDE EXC. POLICE & FLEET

Cam Sprocket S512 46 TEETH USE W/3/4" WIDE CHAIN EXC. POLICE & FLEETCrank Sprocket S281 23 TEETH USE W/7/8" WIDE CHAIN EXC. POLICE & FLEET


AUDIEngine Year Line Engine Year Line Engine Year Line

4 Cyl.1.5 (1471CC) OHC 1973-74 11.6 (1588CC) OHC 1975-80 21.6 (1588CC) OHC 1982-83 31.7 (1715CC) OHC 1981-83 41.8 (1760CC) OHV 1970-71 51.8 (1780CC) OHC 1984-87 61.8 (1781CC) 1997-06 71.9 (1871CC) OHV 1972-77 82.0 (1983CC) SOHC 1988-90 92.0 (1984CC) DOHC 2005-11 10

5 Cyl.2.2 (2144CC) SOHC 1983-85 112.2 (2144CC) SOHC 1978-85 122.2 (2226CC) SOHC 1984-91 132.2 (2226CC) DOHC 1991 142.3 (2309CC) SOHC 1987-92 152.3 (2309CC) DOHC 1990-91 166 Cyl.2.7 (2671CC) DOHC 2000-05 172.8 (2771CC) SOHC 1992-98 182.8 (2771CC) DOHC 1997-01 19

6 Cyl. (Continued)

3.0 (2976CC) DOHC 2002-06 208 Cyl.3.6 (3562CC) DOHC 1990-91 213.7 (3679CC) DOHC 1997-99 224.2 (4172CC) DOHC 1992-94 234.2 (4172CC) DOHC 2000-06 244.2 (4172CC) DOHC 2007-08 25


1 1.5 (1471CC) OHC ENG - 1973-74 - 4 Cyl. - 76.5 MM Bore (FOX)(ENG. CODE XV,XW,XY,XZ,ZD,ZE)Belt B-017 121 TEETHCam Sprocket S658 44 TEETHBelt Tensioner BT148

16

AUDI (Continued)LineNo. Part Title Part No Description

2 1.6 (1588CC) OHC ENG - 1975-80 - 4 Cyl. - 79.5 MM Bore (FOX,4000) (ENG. CODE YG,YH,YK)Belt B-017 121 TEETHCam Sprocket S658 44 TEETHBelt Tensioner BT148

3 1.6 (1588CC) OHC ENG - 1982-83 - 4 Cyl. - 76.5 MM Bore (4000)(DIESEL ENG. CODE CR,CY,JK)Belt B-043 135 TEETHCrank Sprocket S663 1983 22 TEETHBelt Tensioner BT89

4 1.7 (1715CC) OHC ENG - 1981-83 - 4 Cyl. - 79.5 MM Bore (4000) (ENG. CODE WT)Belt B-017 121 TEETHCam Sprocket S658 1983 44 TEETHBelt Tensioner BT148

5 1.8 (1760CC) OHV ENG - 1970-72 - 4 Cyl. - 81.5 MM Bore (100,100LS)(ENG. CODE ZT,ZY)Chain 3DR54 54 LINKS

6 1.8 (1780CC) OHC ENG - 1984-87 - 4 Cyl. - 81 MM Bore (4000) (ENG. CODE JN,MG)Belt B-017 121 TEETHCam Sprocket S658 44 TEETHBelt Tensioner BT148

7 1.8 (1781CC) DOHC ENG - 1997-06 - 4 Cyl. - 81 MM Bore (TT,TT QUATTRO,A4, A4 QUATTRO)(ENG. CODE AEB,AMB,AMU,ATC,ATW,AWM,AWP,BEA) (US & CANADA ONLY)Belt B-0306 2000-2006 150 TEETH (INTERFERENCE ENG APPLICATION) TT,

TT QUATTRO W/ENG CODES ATC, AWP8 1.9 (1871CC) OHV ENG - 1972-77 - 4 Cyl. - 84 MM Bore (100 SERIES)

Chain 3DR54 54 LINKS9 2.0 (1983CC) SOHC ENG - 1988-90 - 4 Cyl. - 84.1 MM Bore (MODEL 80)(ENG. CODE 3A)

Belt B-017 121 TEETHCam Sprocket S658 44 TEETHBelt Tensioner BT148

10 2.0 (1984CC) DOHC ENG - 2005-11 - 4 Cyl. - 82.6 MM Bore (A3,A4, A4 QUATTRO, TT, TT QUATTRO)(BPG,BPY,BWT,CAEB,CBFA,CCTA,CDMA,CESA,CETA)Belt B-0334 2005-2008 148 TEETH

11 2.2 (2144CC) SOHC ENG - 1983-85 - 5 Cyl. - 81 MM Bore (QUATTRO)(WX) TURBOBelt B-0127 120 TEETHCam Sprocket S658 44 TEETHCrank Sprocket S581 22 TEETH

12 2.2 (2144CC) SOHC ENG - 1978-85 - 5 Cyl. - 79.5 MM Bore (4000,5000,COUPE) (KH,WD,WE,WK,WU)Crank Sprocket S581 22 TEETH

13 2.2 (2226CC) SOHC ENG - 1984-91 - 5 Cyl. - 82.5 MM Bore (200,200 QUATTRO,4000QUATTRO,5000,5000 QUATTRO,COUPE) (JT,KX,KZ,MC) INCLUDES TURBOCHARGEDBelt B-0127 1984-1988 120 TEETHCam Sprocket S658 1984-1988 44 TEETHCrank Sprocket S581 1986-1988 22 TEETH

14 2.2 (2226CC) DOHC ENG - 1991 - 5 Cyl. - 81 MM Bore (200 QUATTRO) (3B)Chain 3SR44 44 LINKS OIL PUMP CHAIN

15 2.3 (2309CC) SOHC ENG - 1987-92 - 5 Cyl. - 82.5 MM Bore (5000,5000 QUATTRO) (80,80QUATTRO) (90,90 QUATTRO) (100,100 QUATTRO) (QUATTRO COUPE) (NF,NG)Belt B-0127 1987-1988 120 TEETH

B-0170 1989-1992 142 TEETHCam Sprocket S658 44 TEETHContinued on Next Page

17

AUDI (Continued)LineNo. Part Title Part No Description

15 2.3 (2309CC) SOHC ENG - 1987-92 - 5 Cyl. - 82.5 MM Bore (5000,5000 QUATTRO) (80,80QUATTRO) (90,90 QUATTRO) (100,100 QUATTRO) (QUATTRO COUPE) (NF,NG) (Continued)Crank Sprocket S581 22 TEETH

16 2.3 (2309CC) DOHC ENG - 1990-91 - 5 Cyl. - 82.5 MM Bore (90 QUATTRO & QUATTRO COUPE) (7A)Chain 3SR44 44 LINKS CAM TO CAM

17 2.7 (2671CC) DOHC ENG - 2000-05 - 6 Cyl. - 81 MM Bore (A6 QUATTRO,ALL ROADQUATTRO,CABRIOLET,S4) (APB,BEL)Belt B-0297 253 TEETH QUATTRO S4, ALLROAD QUATTRO TURBO

18 2.8 (2771CC) SOHC ENG - 1992-98 - V6 - 82.5 MM Bore (90,90 QUATTRO,100,100 QUATTRO,A4,A6,CABRIOLET)(AAH,AFC)Belt B-0218 239 TEETH 90,90 QUATTRO,100,100 QUATTRO,CABRIOLET

19 2.8 (2771CC) DOHC ENG - 1997-01 - 6 Cyl. - 82.5 MM Bore (A4,A4 QUATTRO,A6,A6 QUATTRO)Belt B-0297 1998-2000 253 TEETH

20 3.0 (2976CC) DOHC ENG - 2002-06 - 6 Cyl. - 82.6 MM Bore (A4 & A6 QUATTRO, QUATTRO) (AVK,BGN)Belt B-0330 281 TEETH INTERFERENCE ENG APPLICATION

21 3.6 (3562CC) DOHC ENG - 1990-91 - V8 - 81 MM Bore (V8 QUATTRO) (PT)Chain 3SR44 44 LINKS OIL PUMP CHAIN

22 3.7 (3697CC) DOHC ENG - 1997-99 - V8 - 84.5 MM Bore (A8,A8 QUATTRO) (AEW)Chain 3SR44 44 LINKS OIL PUMP CHAIN

23 4.2 (4172CC) DOHC ENG - 1992-94 - V8 - 84.5 MM Bore (V8 QUATTRO) 32V ENGINE ABHChain 3SR44 44 LINKS OIL PUMP CHAIN

24 4.2 (4172CC) DOHC ENG - 2000-06 - 8 Cyl. - 84.5 MM Bore (A6 QUATTRO, A8 QUATTRO,ALLROADS QUATTRO, RS6, S6, S8) 40V ENGINE TURBO, NON-TURBOBelt B-0297 2000 253 TEETH A6, A8 QUATTRO

25 4.2 (4172CC) DOHC ENG - 2007-08 - 8 Cyl. - 84.5 MM Bore (RS4, RS4 CABRIOLET) 32V ENGINEBNSChain 3SR44 44 LINKS OIL PUMP

BMWEngine Year Line Engine Year Line Engine Year Line

4 Cyl.1.6 (1573CC) OHC 1964-71 11.8 (1766CC) OHC 1980-85 21.8 (1773CC) SOHC 1963-68 32.0 (1990CC) OHC 1966-79 4

6 Cyl.2.5 (2494CC) OHC 1987-06 52.5 (2495CC) OHC 1969-71 62.7 (2693CC) OHC 1982-88 72.8 (2788CC) OHC 1979-81 8

6 Cyl. (Continued)

3.0 (2985CC) OHC 1975-78 93.5 (3430CC) SOHC 1985-93 10


1 1.6 (1573CC) OHC ENG - 1964-71 - 4 Cyl. - 84 MM Bore (1600, 1600-2, 1600TI)Chain 3DR94 1969-1971 94 LINKS CAMSHAFT

3SR44 1964-1969 44 LINKS OIL PUMP2 1.8 (1766CC) OHC ENG - 1980-85 - 4 Cyl. - 89 MM Bore (318I & 320I)

Chain 172 46 LINKS OIL PUMP3SR94 94 LINKS CAMSHAFT

Cam Sprocket S656 36 TEETH3 1.8 (1773CC) SOHC ENG - 1963-68 - 4 Cyl. - 84 MM Bore (1800 1963-68,1800TI 1964-67)

Chain 3DR94 94 LINKS CAMSHAFT3SR44 44 LINKS OIL PUMP

18

BMW (Continued)LineNo. Part Title Part No Description

4 2.0 (1990CC) OHC ENG - 1966-79 - 4 Cyl. - 89 MM Bore (2000,2000CA,2000CS,2000TI,2002,2002TII& 320I)Chain 172 1968-1979 46 LINKS OIL PUMP

3DR94 94 LINKS CAMSHAFT3SR44 1966-1968 44 LINKS OIL PUMP

5 2.5 (2494CC) OHC ENG - 1987-06 - 6 Cyl. - 84 MM Bore (323, 325, 525, Z3, Z4)Belt B-0131 1987-1994 127 TEETH

6 2.5 (2495CC) OHC ENG - 1969-71 - 6 Cyl. - 86 MM Bore (2500)Chain 172 46 LINKS OIL PUMP

3DR94 94 LINKS CAMSHAFT7 2.7 (2693CC) OHC ENG - 1982-88 - 6 Cyl. - 84 MM Bore (325,325E,325EA,528E)

Belt B-0106 128 TEETHB-0131 127 TEETH

8 2.8 (2788CC) OHC ENG - 1969-81 - 6 Cyl. - 86 MM Bore (2800 & 2800CS,528I)Chain 172 46 LINKS OIL PUMP

3DR94 94 LINKS CAMSHAFT9 3.0 (2985CC) OHC ENG - 1975-78 - 6 Cyl. - 89 MM Bore (BAVARIA,630CS,3.0S,3.OSI & 530I)

Chain 172 46 LINKS OIL PUMP3DR94 94 LINKS CAMSHAFT

10 3.5 (3430CC) SOHC ENG - 1985-93 - 6 Cyl. - 92 MM Bore (535I,635I,735I,L6,L7)Chain 172 46 LINKS OIL PUMP CHAIN

3SR94 94 LINKS CAMSHAFT CHAINCam Sprocket S704 36 TEETHCrank Sprocket S703 18 TEETHOil Pump Sprocket S705 27 TEETH

19

BUICKEngine Year Line Engine Year Line Engine Year Line

4 Cyl.1.8-0 (112) SOHC 1982-86 11.8-J (112) OHC 1984-86 22.0-1 (122) OHV 1987-89 32.0-B (122) OHV 1983-84 42.0-P (122) OHV 1983-86 52.0-K (122) SOHC 1987-88 62.0-M (122) SOHC 1987 72.2-4 (134) OHV 1993-96 82.3-3 (138) SOHC 1992-94 92.3-D (138) DOHC 1995 102.3-D (138) DOHC 1988-91 112.4-T (146) DOHC 1996-98 122.4-C,K,R (145) DOHC 2010-13 132.5-5 (151) OHV 1980-83 142.5-R (151) OHV 1982-92 152.5-U (151) OHV 1985-91 166 Cyl.2.8-7 (173) OHV 1980 172.8-W (173) OHV 1985 182.8-W (173) OHV 1987-89 192.8-X (173) OHV 1981-86 202.8-Z (173) OHV 1982-84 213.0-E (181) OHV 1982-85 223.0-L (181) OHV 1985-88 233.0-G (182) DOHC 2010 243.1-J (189) OHV 2000-05 253.1-M (189) OHV 1994-99 263.1-T (189) OHV 1989-93 27196 1978-79 28198 1962-63 29

6 Cyl. (Continued)

3.3-N (204) 1989-93 303.4-E (207) 2002-05 313.5-L (213) OHV 2005-07 328 Cyl.215 1961-63 336 Cyl.3.6-3,7,D,V (217) DOHC 2004-14 34225 1964-67 35231-2 1978-79 36231-3 1978-82 37231-8 1983 38231-9 1984-85 39231-A 1977-87 40231-C 1975-77 41

231-G 1978 426 Cyl.3.8-1 (231) 1991-05 433.8-2 (231) OHV 2005-09 443.8-3 (231) 1984-88 453.8-7 (231) 1986-87 463.8-B (231) 1986 473.8-C (231) 1988-91 483.8-K (231) 1995-05 493.8-L (231) 1990-95 503.9-1,W (237) OHV 2006-07 513.9-1,M (237) OHV 2009-11 52250 1968-75 534.1-4 (252) 1980-84 544.2-S (256) DOHC 2004-07 55

8 Cyl.260 1975-76 564.3-S (265) 1980-81 57267-J 1981-82 584.6-S,Y,9 (281) DOHC 2006-11 59300 1964-67 60301-W 1979-80 61301-Y 1977-79 625.0-E (305) 1991 635.0-G,H,U (305) 1977-87 645.0-Y (307) 1980-90 65322 1953-56 665.3-C,M,P (323,325) OHV 2004-09 67340 1966-67 68350 1968-71 69350 H,J,K,X 1972-80 70350-L 1977-79 71350-R 1977-80 725.7 (350N) 1980-85 735.7-7 (350) 1992-93 745.7-P (350) 1994-96 75364 1957-66 76400 1967-69 77401 1957-66 78403 1977-79 79425 1963-66 80430 1967-69 81455 1970-76 82


1 1.8-0 (112) SOHC ENG - 1982-86 - 4 Cyl. - 84.8 MM Bore (SKYHAWK) (T.B.I.) (OPEL ENG)Belt B-081 111 TEETH

2 1.8-J (112) OHC ENG - 1984-86 - 4 Cyl. - 85 MM Bore (PONTIAC M.F.I. TURBO) (BRAZILIAN ENG)Belt B-081 111 TEETH

3 2.0-1 (122) OHV ENG - 1987-89 - 4 Cyl. - 3.39 Bore (SKYHAWK) (CHEVROLET ENG)3pc Set 3-370S INCLUDES [395], [S558], [S549] & [MPC-393]Chain 395 58 LINKSCam Sprocket S558 40 TEETHCrank Sprocket S549 20 TEETHChain Tensioner BT5115

4 2.0-B (122) OHV ENG - 1983-84 - 4 Cyl. - 3.503 Bore (SKYHAWK) (CHEVROLET ENG)3pc Set 3-370S INCLUDES [395], [S558], [S549] & [MPC-393]Chain 395 58 LINKSCam Sprocket S558 40 TEETHCrank Sprocket S549 20 TEETHChain Tensioner BT5115

5 2.0-P (122) OHV ENG - 1983-86 - 4 Cyl. - 3.39 Bore (SKYHAWK) (CHEVROLET ENG)3pc Set 3-370S INCLUDES [395], [S558], [S549] & [MPC-393]Chain 395 58 LINKSCam Sprocket S558 40 TEETHCrank Sprocket S549 20 TEETHChain Tensioner BT5115

20

BUICK (Continued)LineNo. Part Title Part No Description

6 2.0-K (122) SOHC ENG - 1987-88 - 4 Cyl. - 3.39 Bore (SKYHAWK)(OPEL ENG)Belt B-081 111 TEETH

7 2.0-M (122) SOHC ENG - 1987 - 4 Cyl. - 3.39 Bore (M.F.I. TURBO) (OPEL ENG)Belt B-081 111 TEETH

8 2.2-4 (134) OHV ENG - 1993-96 - 4 Cyl. - 3.500 Bore (M.F.I.)3pc Set 3-370S 1993 INCLUDES [395], [S558], [S549] & [MPC-393]

3-370SA 1994-1996 INCLUDES [395], [S774], [S549] & [MPC-393]3-395S 1994-1996 INCLUDES [370], [S774], [S549], [BT5115] & [MPC-393]

RETRO FIT FINE FINISH CHAIN SET, CHECK FOR POSSIBLEOILING PROBLEM WHEN INSTALLING SET.

Chain 395 58 LINKSCam Thrust Plate Spacer MG221Cam Sprocket S558 1993 40 TEETH

S774 1994-1996 40 TEETHCrank Sprocket S549 20 TEETHChain Tensioner BT5115 FOR USE WITH BOTH 370 AND 395 CHAINS

9 2.3-3 (138) SOHC ENG - 1992-94 - 4 Cyl. - 3.62 Bore3pc Set 3-384S INCLUDES [384], [S734] & [S747]Chain 384 124 LINKSCam Sprocket S734 38 TEETHCrank Sprocket S747 19 TEETHChain Guide BG305 LEFT HAND

BG307 RIGHT HAND10 2.3-D (138) DOHC ENG - 1995 - 4 Cyl. - 3.62 Bore (SKYLARK)

Timing Kit 3-383SB KIT INCLUDES [383], (2) [S734], [S747], [BG304], [BG305] &[BG306] UPDATED TIMING CHAIN WILL NOT FIT ORIGINALWATER PUMP SPROCKET USE GM 24570609 WITH 383 CHAIN.MELLING DOES NOT FURNISH.

3pc Set 3-383S INCLUDES [383], (2) [S734] & [S747] 2ND. DESIGN3-3DR130 INCLUDES [3DR130], (2) [S692] & [S653] 1ST DES.

Chain 383 130 LINKS STANDARD FINISH CHAIN 2ND. DES.383M 130 LINKS FINE FINISH CHAIN3DR130 130 LINKS 1ST DES. ROLLER

Cam Sprocket S692 38 TEETH 1ST. DES. (2) REQ.S734 38 TEETH 2ND. DES. (2) REQUIRED

Crank Sprocket S653 19 TEETH 1ST. DES.S747 19 TEETH 2ND. DES.

Chain Guide BG304 2ND DES. 23MM WIDE- RIGHT HANDBG305 2ND DES. 23MM WIDE- LEFT HANDBG306 2ND DES. 23MM WIDE- UPPER

11 2.3-D (138) DOHC ENG - 1988-91 - 4 Cyl. - 3.62 Bore (SKYLARK)Timing Kit 3-383SB KIT INCLUDES [383], (2) [S734], [S747], [BG304], [BG305] &

[BG306] UPDATED TIMING CHAIN WILL NOT FIT ORIGINALWATER PUMP SPROCKET USE GM 24570609 WITH 383 CHAIN.MELLING DOES NOT FURNISH

3pc Set 3-383S INCLUDES [383], (2) [S734] & [S747] 2ND DES.3-3DR130 INCLUDES [3DR130], (2) [S692] & [S653] 1ST DES.

Chain 383 130 LINKS STANDARD FINISH CHAIN 2ND DES.383M 130 LINKS FINE FINISH CHAIN3DR130 130 LINKS 1ST DES. ROLLER

Cam Sprocket S692 38 TEETH 1ST DES. (2) REQ.S734 38 TEETH 2ND DES. (2) REQ.

Crank Sprocket S653 19 TEETH 1ST DES.Continued on Next Page

21


11 2.3-D (138) DOHC ENG - 1988-91 - 4 Cyl. - 3.62 Bore (SKYLARK) (Continued)Crank Sprocket S747 19 TEETH 2ND DES.Chain Tensioner BT188 1988-1991 1ST DES.Chain Guide BG304 2ND DES. 23MM WIDE- RIGHT HAND

BG305 2ND DES. 23MM WIDE- LEFT HANDBG306 2ND DES. 23MM WIDE- UPPER

12 2.4-T (146) DOHC ENG - 1996-98 - 4 Cyl. - 3.62 Bore LD9Timing Kit 3-390SA 1997-1998 KIT INCLUDES [390], (2) [S804T], [S805], [BT355],

[BT356], [BG365], [BG366], [BG367]3pc Set 3-390S INCLUDES [390], (2) [S804T], [S805]Chain 390 130 LINKSCam Sprocket S804T 38 TEETH 2 REQUIREDCrank Sprocket S805 19 TEETHChain Tensioner BT355 1997-1998 TENSIONER ARM

BT356 1997-1998 HYDRAULIC (2ND DESIGN) TENSIONERChain Guide BG365 RIGHT HAND; CAMSHAFT

BG366 LEFT HAND; CAMSHAFTBG367 UPPER; CAMSHAFTBG368 BAL SHAFT

13 2.4-C,K,R (145) DOHC ENG - 2010-13 - 4 Cyl. - 3.46 Bore LACROSSE,REGAL,VERANO (ECOTEC)Chain Guide BG5375 2010-2012 CAMSHAFT CHAIN; RIGHT HAND

BG5381 2010-2012 CAMSHAFT CHAIN; LEFT HANDBG5386 2010-2012 BALANCE SHAFT CHAIN; UPPER

14 2.5-5 (151) OHV ENG - 1980-83 - 4 Cyl. - 4.00 Bore (CENTURY, SKYLARK) (PONTIAC ENG)Gear Set 2538S ALUM. INCLUDES [2524] & [2537]

2542S FIBER INCLUDES [2542] & [2537]Cam Gear 2524 54 TEETH ALUMINUM

2542 54 TEETH FIBERCrank Gear 2537 27 TEETHCam Thrust Plate Spacer MG221

15 2.5-R (151) OHV ENG - 1982-92 - 4 Cyl. - 4.000 Bore (PONTIAC)3pc Set 3-378SA 1991-1992 INCLUDES [378], [S690] & [S713]Chain 378 1991-1992 56 LINKSGear Set 2538S 1982-1990 ALUM. INCLUDES [2524] & [2537]

2542S 1982-1990 FIBER INCLUDES [2542] & [2537]Cam Gear 2524 1982-1990 54 TEETH ALUMINUM

2542 1982-1990 54 TEETH FIBERCrank Gear 2537 1982-1990 27 TEETHCam Thrust Plate Spacer MG221Cam Sprocket S690 1991-1992 42 TEETHCrank Sprocket S713 1991-1992 21 TEETHChain Tensioner BT220 1991-1992

16 2.5-U (151) OHV ENG - 1985-91 - 4 Cyl. - 4.000 Bore3pc Set 3-378S 1990-1991 INCLUDES [378], [S690] & [S695]Chain 378 1990-1991 56 LINKSGear Set 2544S 1985-1989 INCLUDES [2544] & [2537]Cam Gear 2544 1985-1989 54 TEETHCrank Gear 2537 1985-1989 27 TEETHCam Sprocket S690 1990-1991 42 TEETHCrank Sprocket S695 1990-1991 21 TEETHChain Tensioner BT143 1990-1991

22


17 2.8-7 (173) OHV ENG - 1980 - V6 - 89 MM Bore (CHEVROLET)3pc Set 3-373S INCLUDES [373], [S506] & [S511]Chain 373 64 LINKSCam Sprocket S506 40 TEETHCrank Sprocket S511 20 TEETHDamper BD59

18 2.8-W (173) OHV ENG - 1985 - V6 - 3.50 Bore (SKYLARK)3pc Set 3-373S INCLUDES [373], [S506] & [S511]Chain 373 64 LINKSCam Sprocket S506 40 TEETHCrank Sprocket S511 20 TEETHDamper BD59

19 2.8-W (173) OHV ENG - 1987-89 - V6 - 3.50 Bore (CENTURY 1987-89) (REGAL 1988-89)(CHEVROLET ENG)3pc Set 3-372S INCLUDES [385], [S620] & [S619]Chain 385 64 LINKSCam Sprocket S620 40 TEETHCrank Sprocket S619 20 TEETHDamper BD131

20 2.8-X (173) OHV ENG - 1981-86 - V6 - 89 MM Bore (CHEVROLET)3pc Set 3-373S INCLUDES [373], [S506] & [S511]Chain 373 64 LINKSCam Sprocket S506 40 TEETHCrank Sprocket S511 20 TEETHDamper BD59

21 2.8-Z (173) OHV ENG - 1982-84 - V6 - 89 MM Bore (CHEVROLET)3pc Set 3-373S INCLUDES [373], [S506] & [S511]Chain 373 64 LINKSCam Sprocket S506 40 TEETHCrank Sprocket S511 20 TEETHDamper BD59

22 3.0-E (181) OHV ENG - 1982-85 - V6 - 3.800 Bore3pc Set 3-359SB INCLUDES [359], [S610] & [S323]Chain 359 54 LINKSCam Button CB100 W/SPRINGCam Sprocket S610 40 TEETHCrank Sprocket S323 20 TEETHDamper BD44 RIGHT HAND

BD45 LEFT HAND23 3.0-L (181) OHV ENG - 1985-88 - V6 - 3.800 Bore

3pc Set 3-359SC INCLUDES [359], [S610] & [S621] 1985 2ND DES. & 1986-88Chain 359 54 LINKSCam Button CB100 W/SPRINGCam Sprocket S610 40 TEETHCrank Sprocket S609 1985 20 TEETH 1ST DES. SPLINED DRIVE W/32MM THICK

BALANCER HUBS621 1985 20 TEETH 2ND DES. W/DOUBLE FLATS ON OUTSIDE OF

SPROCKET TO TURN OIL PUMP- 36MM THICK BALANCER HUBS621 1986-1988 20 TEETH

Damper BD58

23


24 3.0-G (182) DOHC ENG - 2010 - 6 Cyl. - 3.50 Bore ALLURE (CANADA), LACROSSETiming Kit 3-753S INCLUDES [753], (2) [754], [S921], [S930], [S932], [BT5535],

[BT5536], [BT5537], [BG5548], [BG5530], [BG5531], [BG5532],[BG5533], [BG5534] FOR ENGINES USING SILENT TYPE CHAINS

Chain 753 96 LINKS LOWER; PRIMARY754 114 LINKS UPPER; SECONDARY (2) REQUIRED

Crank Sprocket S921 30 TEETHIdler Sprocket S930 22 TEETH INCLUDES MOUNTING BOLT LEFT HAND

S932 22 TEETH INCLUDES MOUNTING BOLT RIGHT HANDChain Tensioner BT5535 INCLUDES GASKET AND 2 MOUNTING BOLTS SECONDARY

CHAIN; LEFT HANDBT5536 INCLUDES GASKET AND 2 MOUNTING BOLTS SECONDARY

CHAIN; RIGHT HANDBT5537 INCLUDES MOUNTING GASKET AND 2 MOUNTING BOLTS

PRIMARY CHAINChain Guide BG5530 INCLUDES (2) MOUNTING BOLTS PRIMARY CHAIN; UPPER

BG5531 INCLUDES 2 MOUNTING BOLTS SECONDARY CHAIN; LEFTHAND

BG5532 INCLUDES 2 MOUNTING BOLTS SECONDARY CHAIN; RIGHTHAND

BG5533 PRIMARY CHAIN; RIGHT HANDBG5534 PRIMARY CHAIN; LEFT HAND; LOWERBG5548 PRIMARY CHAIN; RIGHT HAND; LOWER

25 3.1-J (189) OHV ENG - 2000-05 - V6 - 3.50 Bore (CENTURY)Timing Kit 3-700SB KIT INCLUDES [700], [S847], [S848], [BD600]3pc Set 3-700S INCLUDES [700], [S847], [S848]Chain 700 80 LINKSCam Sprocket S848 50 TEETHCrank Sprocket S847 25 TEETHDamper BD600

26 3.1-M (189) OHV ENG - 1994-99 - V6 - 3.50 BoreTiming Kit 3-385SC 1994-1998 KIT INCLUDES [385], [S619], [S756], [BD336]

3-385SC 1999 KIT INCLUDES [385], [S619], [S756], [BD336] 1ST DES.3-700SB 1999 KIT INCLUDES [700], [S847], [S848], [BD600] 2ND DES.

W/79 LINK CHAIN, 50 TOOTH CAM SPROCKET & 25 TOOTHCRANK SPROCKET

3pc Set 3-385S 1994-1998 INCLUDES [385], [S756] & [S619]3-385S 1999 INCLUDES [385], [S756] & [S619] 1ST DES. W/64 LINK

CHAIN, 40 TOOTH CAM SPROCKET & 20 TOOTH CRANKSPROCKET

3-700S 1999 INCLUDES [700], [S847], [S848] 2ND DES. W/79 LINKCHAIN, 50 TOOTH CAM SPROCKET & 25 TOOTH CRANKSPROCKET

Chain 385 1994-1998 64 LINKS385 1999 64 LINKS 1ST DES.700 1999 80 LINKS 2ND DES. W/80 LINKS

Cam Sprocket S756 1994-1998 40 TEETHS756 1999 40 TEETH 1ST DES.S848 1999 50 TEETH 2ND DES.

Crank Sprocket S619 1994-1998 20 TEETHS619 1999 20 TEETH 1ST DES.S847 1999 25 TEETH 2ND DES.

Damper BD336 1994-1998BD336 1999 1ST DESIGN


24


26 3.1-M (189) OHV ENG - 1994-99 - V6 - 3.50 Bore (Continued)Damper BD600 1999 2ND DESIGN

27 3.1-T (189) OHV ENG - 1989-93 - V6 - 3.503 Bore3pc Set 3-372S INCLUDES [385], [S620] & [S619]Chain 385 64 LINKSCam Sprocket S620 40 TEETHCrank Sprocket S619 20 TEETHDamper BD131

28 196 ENG - 1978-79 - V6 - 3.54 Bore3pc Set 3-359SB INCLUDES [359], [S610] & [S323]Chain 359 54 LINKSCam Button CB100 W/SPRINGCam Sprocket S610 40 TEETHCrank Sprocket S323 20 TEETHDamper BD44 RIGHT HAND W/SPRING

BD45 LEFT HAND29 198 ENG - 1962-63 - V6 - 3.63 Bore (SKYLARK,SPECIAL)

3pc Set 3-359S INCLUDES [359], [S334] & [S323]Chain 359 54 LINKSCam Sprocket S334 40 TEETHCrank Sprocket S323 20 TEETHDamper BD44 RIGHT HAND W/SPRING

BD45 LEFT HAND30 3.3-N (204) ENG - 1989-93 - V6 - 3.700 Bore (SKYLARK, CENTURY)

3pc Set 3-377S 1989-1990 INCLUDES [377], [S684] & [S691]3-377SA 1991-1993 INCLUDES [377], [S726] & [S621]

Chain 377 54 LINKSCam Button CB300 1989-1990Cam Sprocket S726 1991-1993 40 TEETHCrank Sprocket S621 20 TEETHDamper BD295 1989-1992 2ND DES. W/COUNTER BORED DAMPER BOLT HOLE

BD295 1993BD58 1989-1992 1ST DES. W/CHAMFERED DAMPER BOLT HOLE

31 3.4-E (207) ENG - 2002-05 - V6 - 3.62 Bore LA1 ENG (RENDEZVOUS)Timing Kit 3-700SB KIT INCLUDES [700], [S847], [S848], [BD600]3pc Set 3-700S INCLUDES [700], [S847], [S848]Chain 700 80 LINKSCam Sprocket S848 50 TEETHCrank Sprocket S847 25 TEETHDamper BD600

32 3.5-L (213) OHV ENG - 2005-07 - 6 Cyl. - 3.70 Bore (RENDEZVOUS, TERRAZA) INCLUDES VANSTiming Kit 3-700SB KIT INCLUDES [700], [S847], [S848], [BD600]3pc Set 3-700S INCLUDES [700], [S847], [S848]Chain 700 80 LINKSCam Sprocket S848 50 TEETHCrank Sprocket S847 25 TEETHDamper BD600


25


34 3.6-3,7,D,V (217) DOHC ENG - 2004-14 - 6 Cyl. - 3.70 Bore(ALLURE,ENCLAVE,LACROSSE,RENDEZVOUS) GAS/FLEX FUELTiming Kit 3-1007S 2004-2006 KIT INCLUDES [1007], (2) [1044], [S1225], [S1227],

[S1229], [BT5535], [BT5536], [BT5537], [BG5530], [BG5531],[BG5532], [BG5533], [BG5534], [BG5548] FOR ENGINES USINGROLLER TYPE SECONDARY (UPPER) CHAINS

3-753S 2007-2013 INCLUDES [753], (2) [754], [S921], [S930], [S932],[BT5535], [BT5536], [BT5537], [BG5548], [BG5530], [BG5531],[BG5532], [BG5533], [BG5534] EXC. 2011-13 LACROSSE; FORENGINES USING SILENT TYPE CHAINS

Chain 1007 2004-2006 78 LINKS PRIMARY ROLLER TIMING CHAIN1044 2004-2006 92 LINKS SECONDARY ROLLER TIMING CHAIN; 2

REQ.753 2007-2013 96 LINKS PRIMARY; LOWER754 2007-2013 114 LINKS SECONDARY; UPPER; 2 REQUIRED

Crank Sprocket S1229 2004-2006 24 TEETHS921 2007-2013 30 TEETH

Idler Sprocket S1225 2004-2006 18 / 27 TEETH LEFT HANDS1227 2004-2006 18 / 27 TEETH RIGHT HANDS930 2007-2013 22 TEETH INCLUDES MOUNTING BOLT LEFT HANDS932 2007-2013 22 TEETH INCLUDES MOUNTING BOLT RIGHT HAND

Chain Tensioner BT5535 2004-2013 INCLUDES GASKET AND 2 MOUNTING BOLTSTIMING CHAIN TENSIONER; SECONDARY CHAIN; LEFT HANDUPPER; EXC. 2012-13 LACROSSE

BT5536 2004-2013 INCLUDES GASKET AND 2 MOUNTING BOLTSTIMING CHAIN TENSIONER; SECONDARY CHAIN; RIGHT HANDUPPER; EXC. 2011-13 LACROSSE

BT5537 2004-2013 INCLUDES MOUNTING GASKET AND 2 MOUNTINGBOLTS TIMING CHAIN TENSIONER; PRIMARY CHAIN; EXC.2012-13 LACROSSE

Chain Guide BG5530 2004-2013 INCLUDES (2) MOUNTING BOLTS PRIMARY CHAIN;UPPER

BG5531 2004-2013 INCLUDES 2 MOUNTING BOLTS SECONDARYCHAIN; LEFT HAND

BG5532 2004-2013 INCLUDES 2 MOUNTING BOLTS SECONDARYCHAIN; RIGHT HAND

BG5533 2004-2013 PRIMARY CHAIN; RIGHT HANDBG5534 2004-2013 PRIMARY CHAIN; LEFT HAND; LOWERBG5548 2004-2013 PRIMARY CHAIN; RIGHT HAND; LOWER; EXC. 2012-

13 LACROSSE35 225 ENG - 1964-67 - V6 - 3 3/4 Bore

3pc Set 3-359S INCLUDES [359], [S334] & [S323]Chain 359 54 LINKSCam Sprocket S334 40 TEETHCrank Sprocket S323 20 TEETHDamper BD44 RIGHT HAND W/SPRING

BD45 LEFT HAND36 231-2 ENG - 1978-79 - V6 - 3.78 Bore (SKYHAWK,CENTURY,REGAL)

3pc Set 3-359SB INCLUDES [359], [S610] & [S323]Chain 359 54 LINKSCam Button CB100 W/SPRINGCam Sprocket S610 40 TEETHCrank Sprocket S323 20 TEETHDamper BD44 RIGHT HAND W/SPRINGContinued on Next Page

26


36 231-2 ENG - 1978-79 - V6 - 3.78 Bore (SKYHAWK,CENTURY,REGAL) (Continued)Damper BD45 LEFT HAND

37 231-3 ENG - 1978-82 - V6 - 3.800 Bore (231-3) CARB TURBO CHARGED3pc Set 3-359SB INCLUDES [359], [S610] & [S323]Chain 359 54 LINKSCam Button CB100 W/SPRINGCam Sprocket S610 40 TEETHCrank Sprocket S323 20 TEETHDamper BD44 RIGHT HAND; W/SPRING

BD45 1978-1981 LEFT HAND38 231-8 ENG - 1983 - V6 - 3.800 Bore

3pc Set 3-359SB INCLUDES [359], [S610] & [S323]Chain 359 54 LINKSCam Button CB100 W/SPRINGCam Sprocket S610 40 TEETHCrank Sprocket S323 20 TEETHDamper BD44 RIGHT HAND W/SPRING

39 231-9 ENG - 1984-85 - V6 - 3.800 Bore (REGAL & RIVIERA ONLY)3pc Set 3-359SB INCLUDES [359], [S610] & [S323]Chain 359 54 LINKSCam Button CB100 W/SPRINGCam Sprocket S610 40 TEETHCrank Sprocket S323 20 TEETHDamper BD44 RIGHT HAND W/SPRING

40 231-A ENG - 1977-87 - V6 - 3.800 Bore (EVEN FIRE)3pc Set 3-359SB INCLUDES [359], [S610] & [S323]Chain 359 54 LINKSCam Button CB100 W/SPRINGCam Sprocket S610 40 TEETHCrank Sprocket S323 20 TEETHDamper BD44 RIGHT HAND W/SPRING

BD45 1977-1981 LEFT HAND41 231-C ENG - 1975-77 - V6 - 3.78 Bore (ODD FIRE)

3pc Set 3-359S INCLUDES [359], [S334] & [S323]Chain 359 54 LINKSCam Button CB100 W/SPRINGCam Sprocket S334 40 TEETHCrank Sprocket S323 20 TEETHDamper BD44 RIGHT HAND W/SPRING

BD45 LEFT HAND42 231-G ENG - 1978 - V6 - 3.800 Bore


BD45 LEFT HAND43 3.8-1 (231) ENG - 1991-05 - V6 - 3.800 Bore (S.F.I.) SUPERCHARGED

3pc Set 3-375SA 1991-1994 INCLUDES [375], [S716] & [S729]3-375SA 1995 INCLUDES [375], [S716] & [S729] 1ST DES.3-381ASB 1995 INCLUDES [381A], [S811] & [S812] 2ND DES.3-381ASB 1996-2005 INCLUDES [381A], [S811] & [S812]


27


43 3.8-1 (231) ENG - 1991-05 - V6 - 3.800 Bore (S.F.I.) SUPERCHARGED (Continued)Chain 375 1991-1994 54 LINKS

375 1995 54 LINKS 1ST DES.381A 1995 64 LINKS 2ND DES.381A 1996-2005 64 LINKS

Cam Sprocket S716 1991-1994 40 TEETHS716 1995 40 TEETH 1ST DES.S812 1995 48 TEETH 2ND DES.S812 1996-2005 48 TEETH

Crank Sprocket S729 1991-1994 20 TEETHS729 1995 20 TEETH 1ST DES.S811 1995 24 TEETH 2ND DES.S811 1996-2005 24 TEETH

Damper BD295 1991-1992 2ND DES. W/COUNTER BORED DAMPER BOLT HOLEBD295 1993-1994BD295 1995 1ST DES. W/.062" WIDE SHOEBD344 1995 2ND DES. W/.081 WIDE SHOEBD344 1996-2005BD58 1991-1992 1ST DES. W/CHAMFERED DAMPER BOLT HOLE

44 3.8-2 (231) OHV ENG - 2005-09 - 6 Cyl. - 3.80 Bore (ALLURE, LACROSSE, LUCERNE)3pc Set 3-381AS 2005-2008 INCLUDES [381A], [S810], [S811]Chain 381A 64 LINKSCam Sprocket S810 48 TEETHCrank Sprocket S811 24 TEETHDamper BD344

45 3.8-3 (231) ENG - 1984-88 - V6 - 3.800 Bore (CENTURY,ELECTRA,LESABRE,RIVIERA)(FUELINJECTED)3pc Set 3-359SB 1984-1985 INCLUDES [359], [S610] & [S323]

3-359SC 1986-1988 INCLUDES [359], [S610] & [S621]Chain 359 54 LINKSCam Button CB100 W/SPRINGCam Sprocket S610 40 TEETHCrank Sprocket S323 1984-1985 20 TEETH

S621 1986-1988 20 TEETHDamper BD44 1984-1985 RIGHT HAND; W/SPRING

BD58 1986-1988 W/SPRING46 3.8-7 (231) ENG - 1986-87 - V6 - 3.800 Bore (REGAL TURBO)

3pc Set 3-359SB INCLUDES [359], [S610] & [S323]Chain 359 54 LINKSCam Sprocket S610 40 TEETHCrank Sprocket S323 20 TEETHDamper BD44 RIGHT HAND; W/SPRING

47 3.8-B (231) ENG - 1986 - V6 - 3.800 Bore3pc Set 3-359SC INCLUDES [359], [S610] & [S621]Chain 359 54 LINKSCam Button CB100 W/SPRINGCam Sprocket S610 40 TEETHCrank Sprocket S621 20 TEETHDamper BD58 W/SPRING

48 3.8-C (231) ENG - 1988-91 - V6 - 3.800 Bore3pc Set 3-375S 1988-1990 INCLUDES [375], [S718] & [S729]

3-375SA 1991 INCLUDES [375], [S716] & [S729]Chain 375 54 LINKSContinued on Next Page

28


48 3.8-C (231) ENG - 1988-91 - V6 - 3.800 Bore (Continued)Cam Button CB300 1988-1990Cam Sprocket S716 1991 40 TEETH

S718 1988-1990 40 TEETHCrank Sprocket S729 20 TEETHDamper BD295 1988-1990

BD295 1991 2ND DES. W/COUNTER BORED DAMPER BOLT HOLEBD58 1991 1ST DES. W/CHAMFERED DAMPER BOLT HOLE

49 3.8-K (231) ENG - 1995-05 - V6 - 3.800 Bore (M.F.I.)3pc Set 3-381AS INCLUDES [381A], [S810], [S811]Chain 381A 64 LINKSCam Sprocket S810 48 TEETHCrank Sprocket S811 24 TEETHDamper BD344

50 3.8-L (231) ENG - 1990-95 - V6 - 3.800 Bore (S.F.I.)3pc Set 3-375SA 1990-1994 INCLUDES [375], [S716] & [S729]

3-381AS 1995 INCLUDES [381A], [S810], [S811]Chain 375 1990-1994 54 LINKS

381A 1995 64 LINKSCam Sprocket S716 1990-1994 40 TEETH

S810 1995 48 TEETHCrank Sprocket S729 1990-1994 20 TEETH

S811 1995 24 TEETHDamper BD295 1990-1992 2ND DES. W/COUNTER- BORED DAMPER BOLT

HOLEBD295 1993-1994BD344 1995BD58 1990-1992 1ST DES. W/CHAMFERED DAMPER BOLT HOLE

51 3.9-1,W (237) OHV ENG - 2006-07 - 6 Cyl. - 3.90 Bore (TERRAZA) GAS,FLEXChain 700 80 LINKSCrank Sprocket S847 25 TEETH

52 3.9-1,M (237) OHV ENG - 2009-11 - 6 Cyl. - 3.90 Bore (LUCERNE)Chain 700 80 LINKSCrank Sprocket S847 25 TEETH

53 250 ENG - 1968-75 - 6 Cyl. - 3.88 Bore (CHEVROLET ENG) (APOLLO,LESABRE,SKYLARK,SPECIAL)Gear Set 2542S FIBER INCLUDES [2542] & [2537] ENGINES W/HEAD & INTAKE

MANIFOLD CAST AS ONECam Gear 2542 54 TEETH FIBERCrank Gear 2501 27 TEETH W/HEAD & INT. MANIFOLD SEPARATE

2537 27 TEETH ENGINES W/HEAD & INTAKE MANIFOLD CAST ASONE

Cam Thrust Plate Spacer MG22154 4.1-4 (252) ENG - 1980-84 - V6 - 3.965 Bore


BD45 LEFT HAND55 4.2-S (256) DOHC ENG - 2004-07 - 6 Cyl. - 3.66 Bore (RAINIER CXL, CXL PLUS)

Timing Kit 3-195S INCLUDES [195], [S908A], [S913], [BT5512], [BG5504], [BG5506],[BG6006]


29


55 4.2-S (256) DOHC ENG - 2004-07 - 6 Cyl. - 3.66 Bore (RAINIER CXL, CXL PLUS) (Continued)Chain 195 168 LINKSCam Sprocket S908A 58 TEETHCrank Sprocket S913 29 TEETHChain Tensioner BT5512Chain Guide BG5504 RIGHT HAND

BG5506 LEFT HANDBG6006 UPPER

56 260 ENG - 1975-76 - 8 Cyl. - 3.500 Bore (OLDSMOBILE)3pc Set 3-498SC INCLUDES [498], [S348] & [S349]Chain 498 48 LINKSCam Sprocket S348 36 TEETHCrank Sprocket S349 18 TEETH

57 4.3-S (265) ENG - 1980-81 - 8 Cyl. - 3.750 Bore (CHEVROLET)3pc Set 3-365S INCLUDES [365], [S494] & [S495]Chain 365 60 LINKSCam Sprocket S494 42 TEETHCrank Sprocket S495 21 TEETH

58 267-J ENG - 1981-82 - 8 Cyl. - 3.500 Bore (CHEVROLET) CANADA ONLY3pc Set 3-163S INCLUDES [163], [S288] & [S289] HEAVY DUTY

3-499S INCLUDES [499], [S390] & [S391] STANDARD DUTYChain 163 58 LINKS HEAVY DUTY

499 46 LINKS STANDARD DUTYCam Sprocket S288 44 TEETH HEAVY DUTY

S390 36 TEETH STANDARD DUTYCrank Sprocket S289 22 TEETH HEAVY DUTY

S391 18 TEETH STANDARD DUTY59 4.6-S,Y,9 (281) DOHC ENG - 2006-11 - 8 Cyl. - 3.66 Bore (LUCERNE) 32V NORTHSTAR

Timing Kit 3-8MMSRH62S KIT INCLUDES: (2) [8MMSRH126], [8MMSRH62], [BD311],[BD312],(2) [BT313], [BT314], [BG309],(2) [BG310] (NOTE: THISKIT DOES NOT CONTAIN SPROCKETS)

Chain 8MMSRH126 126 LINKS UPPER (2) REQ.8MMSRH62 62 LINKS LOWER

Intermediate Sprocket S772 28/42 TEETHChain Tensioner BT313 2 REQ.; UPPER

BT314 LOWERDamper BD311 LEFT HAND

BD312 RIGHT HANDChain Guide BG309 LOWER LEFT

BG310 2 REQ.; UPPER60 300 ENG - 1964-67 - 8 Cyl. - 3 3/4 Bore

3pc Set 3-359S INCLUDES [359], [S334] & [S323]Chain 359 54 LINKSCam Sprocket S334 40 TEETHCrank Sprocket S323 20 TEETH

61 301-W ENG - 1979-80 - 8 Cyl. - 4.000 Bore (PONTIAC)3pc Set 3-365S INCLUDES [365], [S494] & [S495]Chain 365 60 LINKSCam Sprocket S494 42 TEETHCrank Sprocket S495 21 TEETH

62 301-Y ENG - 1977-79 - 8 Cyl. - 4.000 Bore (PONTIAC)3pc Set 3-365S INCLUDES [365], [S494] & [S495]Chain 365 60 LINKSContinued on Next Page

30


62 301-Y ENG - 1977-79 - 8 Cyl. - 4.000 Bore (PONTIAC) (Continued)Cam Sprocket S494 42 TEETHCrank Sprocket S495 21 TEETH

63 5.0-E (305) ENG - 1991 - 8 Cyl. - 3.736 Bore3pc Set 3-506SC INCLUDES [499], [S732] & [S391]Chain 499 46 LINKSCam Sprocket S732 36 TEETHCrank Sprocket S391 18 TEETH

64 5.0-G,H,U (305) ENG - 1977-87 - 8 Cyl. - 3.74 Bore (CENTURY,LESABRE,REGAL,SKYLARK)3pc Set 3-163S INCLUDES [163], [S288] & [S289] HEAVY DUTY




S391 18 TEETH STANDARD DUTY65 5.0-Y (307) ENG - 1980-90 - 8 Cyl. - 3.800 Bore (OLDSMOBILE)

3pc Set 3-498SC INCLUDES [498], [S348] & [S349]Chain 498 48 LINKSCam Sprocket S348 36 TEETHCrank Sprocket S349 18 TEETH

66 322 ENG - 1953-56 - 8 Cyl. - 4.000 BoreChain 491 52 LINKS

67 5.3-C,M,P (323,325) OHV ENG - 2004-09 - 8 Cyl. - 3.78 Bore (ALLURE 08-09, LACROSSE 08-09,RAINIER 04-07) VORTEC3pc Set 3-3SRH60S 2008-2009 INCLUDES [3SRH60], [S894] & [S827]; FOR USE

W/SINGLE BOLT CAMSHAFT LACROSSE3-3SRH60SA 2004-2007 INCLUDES [3SRH60], [S878] & [S827]; FOR USE W/3

BOLT CAMSHAFT RAINIERChain 3SRH60 60 LINKSCam Sprocket S878 2004-2007 44 TEETH; FOR USE W/3BOLT CAMSHAFT RAINIER;

RELUCTOR STYLE CAM SPROCKET, MUST BE USED WITH[3SRH60] CHAIN

S894 2008-2009 44 TEETH; FOR USE W/SINGLE BOLT CAMLACROSSE

Crank Sprocket S827 22 TEETH 22 TEETH RAINIER,LACROSSE ONLY68 340 ENG - 1966-67 - 8 Cyl. - 3 3/4 Bore



70 350 H,J,K,X ENG - 1972-80 - 8 Cyl. - 3.80 Bore3pc Set 3-359S INCLUDES [359], [S334] & [S323]Chain 359 54 LINKSCam Sprocket S334 40 TEETHCrank Sprocket S323 20 TEETH

31


71 350-L ENG - 1977-79 - 8 Cyl. - 4.000 Bore (CHEVROLET)3pc Set 3-163S INCLUDES [163], [S288] & [S289] HEAVY DUTY




S391 18 TEETH STANDARD DUTY72 350-R ENG - 1977-80 - 8 Cyl. - 4.06 Bore (OLDSMOBILE)


73 5.7 (350N) ENG - 1980-85 - 8 Cyl. - 4.00 Bore (OLDSMOBILE DIESEL)Chain 180 48 LINKSCrank Sprocket S503 18 TEETH

74 5.7-7 (350) ENG - 1992-93 - 8 Cyl. - 4.06 Bore3pc Set 3-506SE INCLUDES [499], [S732], [S797]Chain 499 46 LINKSCam Sprocket S732 36 TEETHCrank Sprocket S797 18 TEETH

75 5.7-P (350) ENG - 1994-96 - 8 Cyl. - 4.000 Bore (LT1)3pc Set 3-509SA INCLUDES [499], [S797], [S814]Chain 499 46 LINKSCam Sprocket S814 36 TEETHCrank Sprocket S797 18 TEETH

76 364 ENG - 1957-66 - 8 Cyl. - 4.13 BoreChain 491 52 LINKSCam Sprocket S332 38 TEETHCrank Sprocket S276 19 TEETH

77 400 ENG - 1967-69 - 8 Cyl. - 4.04 Bore3pc Set 3-498SA 1967-1969 INCLUDES [498], [S398] & [S369] LATEChain 498 48 LINKSCam Sprocket S398 1967-1969 36 TEETH LATECrank Sprocket S369 18 TEETH

78 401 ENG - 1957-66 - 8 Cyl. - 4 3/16 Bore (400)Chain 491 52 LINKSCam Sprocket S332 38 TEETHCrank Sprocket S276 19 TEETH


80 425 ENG - 1963-66 - 8 Cyl. - 4 5/16 BoreChain 491 52 LINKSCam Sprocket S332 38 TEETHCrank Sprocket S276 19 TEETH

81 430 ENG - 1967-69 - 8 Cyl. - 4 3/16 Bore3pc Set 3-498SA 1967-1969 INCLUDES [498], [S398] & [S369] LATE 1967 & 1968-

1969Continued on Next Page

32


81 430 ENG - 1967-69 - 8 Cyl. - 4 3/16 Bore (Continued)Chain 498 48 LINKSCam Sprocket S398 1967-1969 36 TEETH LATE 1967 & 1968-1969Crank Sprocket S369 18 TEETH

82 455 ENG - 1970-76 - 8 Cyl. - 4 5/16 Bore3pc Set 3-498SA INCLUDES [498], [S398] & [S369]Chain 498 48 LINKSCam Sprocket S398 36 TEETHCrank Sprocket S369 18 TEETH

CADILLACEngine Year Line Engine Year Line Engine Year Line

4 Cyl.2.0-P (122) 1983-86 16 Cyl.2.8-T (170) DOHC 2005-07 22.8-W (173) 1985-88 33.0-R (185) DOHC 1997-01 43.0-G,Y (182) DOHC 2010-11 53.0-5 (182) DOHC 2012-14 63.2-N (197) DOHC 2003-04 73.6 (217) DOHC 2004-14 88 Cyl.4.1-7 (250) 1987-88 96 Cyl.4.1-4 (252) 1980-82 108 Cyl.4.1-8 (252) 1982-87 11

8 Cyl. (Continued)

4.5-3 (273) 1990 124.5-5 (273) 1988-89 134.5-8 (273) 1989-92 144.6-6,9,A,S,Y (281) DOHC 1993-11 154.9-B (300) OHV 1991-95 165.0-E (305) 1991-92 175.0-9 (307) 1987-90 185.0-Y (307) 1986-90 195.3 (322) L-HEAD 1942 205.3-T (323) OHV 2002-05 21331 1949-55 225.7 (346) L-HEAD 1942-48 235.7-B,R,8 (350) 1976-80 245.7 (350N) DIESEL 1978-85 255.7-7 (350) OHV 1990-93 26

8 Cyl. (Continued)

5.7-P (350) 1994-96 275.7-R (350) OHV 1999-00 285.7-S (346) OHV 2004-05 296.0-N,U (364) OHV 2002-07 306.0-5,J (364) OHV 2009-13 31365 1956-58 326.0 (368) 6 & 9 1980-84 336.2 (376) OHV 2007-14 34390 1959-63 35425 1977-79 36429 1964-67 37472 1968-74 388.2 (500) 1970-76 39


1 2.0-P (122) ENG - 1983-86 - 4 Cyl. - 3.39 Bore (CIMARRON) (CHEVROLET ENG)3pc Set 3-370S INCLUDES [395], [S558], [S549] & [MPC-393]Chain 395 58 LINKSCam Sprocket S558 40 TEETHCrank Sprocket S549 20 TEETHChain Tensioner BT5115

2 2.8-T (170) DOHC ENG - 2005-07 - 6 Cyl. - 3.50 Bore (CTS)Timing Kit 3-1007S KIT INCLUDES [1007], (2) [1044], [S1225], [S1227], [S1229],

[BT5535], [BT5536], [BT5537], [BG5530], [BG5531], [BG5532],[BG5533], [BG5534], [BG5548] FOR ENGINES USING ROLLERTYPE SECONDARY (UPPER) CHAINS

Chain 1007 78 LINKS PRIMARY ROLLER TIMING CHAIN1044 92 LINKS SECONDARY ROLLER TIMING CHAIN; 2 REQ.

Crank Sprocket S1229 24 TEETHIdler Sprocket S1225 18 / 27 TEETH LEFT HAND

S1227 18 / 27 TEETH RIGHT HANDChain Tensioner BT5535 INCLUDES GASKET AND 2 MOUNTING BOLTS TIMING CHAIN

TENSIONER; SECONDARY CHAIN; LEFT HAND UPPERBT5536 INCLUDES GASKET AND 2 MOUNTING BOLTS TIMING CHAIN

TENSIONER; SECONDARY CHAIN; RIGHT HAND UPPERBT5537 INCLUDES MOUNTING GASKET AND 2 MOUNTING BOLTS

TIMING CHAIN TENSIONER; PRIMARYChain Guide BG5530 INCLUDES (2) MOUNTING BOLTS PRIMARY CHAIN; UPPERContinued on Next Page

33

CADILLAC (Continued)LineNo. Part Title Part No Description

2 2.8-T (170) DOHC ENG - 2005-07 - 6 Cyl. - 3.50 Bore (CTS) (Continued)Chain Guide BG5531 INCLUDES 2 MOUNTING BOLTS SECONDARY CHAIN; LEFT

HANDBG5532 INCLUDES 2 MOUNTING BOLTS SECONDARY CHAIN; RIGHT

HANDBG5533 PRIMARY CHAIN; RIGHT HANDBG5534 PRIMARY CHAIN; LEFT HAND; LOWERBG5548 PRIMARY CHAIN; RIGHT HAND LOWER

3 2.8-W (173) ENG - 1985-88 - V6 - 3.50 Bore CIMARRON (CHEVROLET ENG)3pc Set 3-372S INCLUDES [385], [S620] & [S619]Chain 385 64 LINKSCam Sprocket S620 40 TEETHCrank Sprocket S619 20 TEETHDamper BD131

4 3.0-R (185) DOHC ENG - 1997-01 - V6 - 3.40 BoreBelt B-0285 225 TEETH

5 3.0-G,Y (182) DOHC ENG - 2010-11 - 6 Cyl. - 3.50 Bore (CTS,SRX) 24V LF1 (INCLUDES TRUCKS)Timing Kit 3-753S INCLUDES [753], (2) [754], [S921], [S930], [S932], [BT5535],











6 3.0-5 (182) DOHC ENG - 2012-14 - 6 Cyl. - 3.50 Bore (CTS) 24V LFW ENG.Crank Sprocket S921 30 TEETHChain Guide BG5532 INCLUDES 2 MOUNTING BOLTS SECONDARY CHAIN; RIGHT

HANDBG5534 PRIMARY CHAIN; LEFT HAND; LOWER

7 3.2-N (197) DOHC ENG - 2003-04 - 6 Cyl. - 3.44 Bore (CTS)Belt B-0285 225 TEETH

8 3.6 (217) DOHC ENG - 2004-14 - 6 Cyl. - 3.70 Bore (ATS,CTS,STS,XTS,SRX) GAS,FLEX INCLUDESTRUCKS, TURBOCHARGEDTiming Kit 3-1007S 2004-2006 KIT INCLUDES [1007], (2) [1044], [S1225], [S1227],

[S1229], [BT5535], [BT5536], [BT5537], [BG5530], [BG5531],[BG5532], [BG5533], [BG5534], [BG5548] FOR ENGINES USINGROLLER TYPE SECONDARY (UPPER) CHAINS


34


8 3.6 (217) DOHC ENG - 2004-14 - 6 Cyl. - 3.70 Bore (ATS,CTS,STS,XTS,SRX) GAS,FLEX INCLUDESTRUCKS, TURBOCHARGED (Continued)Timing Kit 3-753S 2007-2013 INCLUDES [753], (2) [754], [S921], [S930], [S932],

[BT5535], [BT5536], [BT5537], [BG5548], [BG5530], [BG5531],[BG5532], [BG5533], [BG5534] EXC. 2012-13 CTS; FOR ENGINESUSING SILENT TYPE CHAIN

Chain 1007 2004-2006 78 LINKS PRIMARY ROLLER TIMING CHAIN1044 2004-2006 92 LINKS SECONDARY ROLLER TIMING CHAIN; 2

REQ.753 2007-2013 96 LINKS PRIMARY CHAIN; LOWER754 2007-2013 114 LINKS SECONDARY CHAIN; UPPER (2)

REQUIREDCrank Sprocket S1229 2004-2006 24 TEETH

S921 2007-2013 30 TEETHIdler Sprocket S1225 2004-2006 18 / 27 TEETH LEFT HAND

S1227 2004-2006 18 / 27 TEETH RIGHT HANDS930 2007-2013 22 TEETH INCLUDES MOUNTING BOLT LEFT HANDS932 2007-2013 22 TEETH INCLUDES MOUNTING BOLT RIGHT HAND

Chain Tensioner BT5535 2004-2013 INCLUDES GASKET AND 2 MOUNTING BOLTSTIMING CHAIN TENSIONER; SECONDARY CHAIN; LEFT HANDUPPER

BT5536 2004-2013 INCLUDES GASKET AND 2 MOUNTING BOLTSTIMING CHAIN TENSIONER; SECONDARY CHAIN; RIGHT HANDUPPER

BT5537 2007-2013 INCLUDES MOUNTING GASKET AND 2 MOUNTINGBOLTS TIMING CHAIN TENSIONER; PRIMARY CHAIN

Chain Guide BG5530 2004-2013 INCLUDES (2) MOUNTING BOLTS PRIMARY CHAIN;UPPER; INCLUDES (2) MOUNTING BOLTS; EXC. 2012-13 CTS



BG5533 2004-2013 PRIMARY CHAIN; RIGHT HANDBG5534 2004-2013 PRIMARY CHAIN; LEFT HAND; LOWERBG5548 2007-2013 PRIMARY CHAIN; RIGHT HAND LOWER; EXC. 2012-

13 CTS9 4.1-7 (250) ENG - 1987-88 - 8 Cyl. - 3.47 Bore (ALLANTE')

3pc Set 3-503SB INCLUDES [503], [S706] & [S533]Chain 503 44 LINKSCam Sprocket S706 34 TEETHCrank Sprocket S533 17 TEETH

10 4.1-4 (252) ENG - 1980-82 - V6 - 3.965 Bore (BUICK)3pc Set 3-359SB INCLUDES [359], [S610] & [S323]Chain 359 54 LINKSCam Button CB100 W/SPRINGCam Sprocket S610 40 TEETHCrank Sprocket S323 20 TEETHDamper BD44 RIGHT HAND W/SPRING

BD45 LEFT HAND11 4.1-8 (252) ENG - 1982-87 - 8 Cyl. - 3.464 Bore


35


12 4.5-3 (273) ENG - 1990 - 8 Cyl. - 3.62 Bore3pc Set 3-503SB INCLUDES [503], [S706] & [S533]Chain 503 44 LINKSCam Sprocket S706 34 TEETHCrank Sprocket S533 17 TEETH

13 4.5-5 (273) ENG - 1988-89 - 8 Cyl. - 3.62 Bore3pc Set 3-503S INCLUDES [503], [S546] & [S533]Chain 503 44 LINKSCam Sprocket S546 34 TEETHCrank Sprocket S533 17 TEETH

14 4.5-8 (273) ENG - 1989-92 - 8 Cyl. - 3.62 Bore3pc Set 3-503SB INCLUDES [503], [S706] & [S533]Chain 503 44 LINKSCam Sprocket S706 34 TEETHCrank Sprocket S533 17 TEETH

15 4.6-6,9,A,S,Y (281) DOHC ENG - 1993-11 - 8 Cyl. - 3.66 Bore(ALLANTE,DEVILLE,DTS,ELDORADO,SEVILLE,SRX,STS,XLR) (INCLUDES TRUCKS) 32VNORTHSTARTiming Kit 3-8MMSRH62S 1993-2005 KIT INCLUDES: (2) [8MMSRH126], [8MMSRH62],

[BD311], [BD312],(2) [BT313], [BT314], [BG309],(2) [BG310](NOTE: THIS KIT DOES NOT CONTAIN SPROCKETS)

3-8MMSRH62SA 1993-1999 KIT INCLUDES: (2) [8MMSRH126], [8MMSRH62],[BD311], [BD312],(2) [BT313], [BT314], [BG309],(2) [BG310],[S768], [S770], [S772], (2) [S780], [S795] (NOTE: THIS KITCONTAINS SPROCKETS)


Cam Sprocket S768 1993-2002 40 TEETH RIGHT HAND INT.S770 1993-1999 40 TEETH RIGHT HAND EXH.S780 1993-2002 40 TEETH LEFT HAND INT.S780 1993-2002 40 TEETH LEFT HAND; EXH.

Crank Sprocket S795 1993-1999 40 TEETHIntermediate Sprocket S772 1993-2009 28/42 TEETH 28 & 42 TEETHChain Tensioner BT313 1993-2008 UPPER (2 REQUIRED)

BT314 1993-2009 LOWERDamper BD311 1993-2009 LEFT HAND

BD312 1993-2009 RIGHT HANDChain Guide BG309 1993-2009 LOWER LEFT

BG310 1993-2005 UPPER (2) REQ.16 4.9-B (300) OHV ENG - 1991-95 - 8 Cyl. - 3.62 Bore


17 5.0-E (305) ENG - 1991-92 - 8 Cyl. - 3.736 Bore3pc Set 3-506SE INCLUDES [499], [S732], [S797]Chain 499 46 LINKSCam Sprocket S732 36 TEETHCrank Sprocket S797 18 TEETH

18 5.0-9 (307) ENG - 1987-90 - 8 Cyl. - 3.80 Bore (BROUGHAM ARMORED VEHICLE-OLDS ENG) (NOTPRODUCED IN 1988)3pc Set 3-498SC INCLUDES [498], [S348] & [S349]Continued on Next Page

36


18 5.0-9 (307) ENG - 1987-90 - 8 Cyl. - 3.80 Bore (BROUGHAM ARMORED VEHICLE-OLDS ENG) (NOTPRODUCED IN 1988) (Continued)Chain 498 48 LINKSCam Sprocket S348 36 TEETHCrank Sprocket S349 18 TEETH

19 5.0-Y (307) ENG - 1986-90 - 8 Cyl. - 3.800 Bore (OLDSMOBILE)3pc Set 3-498SC INCLUDES [498], [S348] & [S349]Chain 498 48 LINKSCam Sprocket S348 36 TEETHCrank Sprocket S349 18 TEETH

20 5.3 (322) L-HEAD ENG - 1942 - 8 Cyl. - 3.38 Bore (SERIES 60)Chain 349 62 LINKS

21 5.3-T (323) OHV ENG - 2002-05 - 8 Cyl. - 3.78 Bore (ESCALADE) VORTEC3pc Set 3-3SRH60SA INCLUDES [3SRH60], [S878] & [S827]; FOR USE W/3 BOLT

CAMSHAFTChain 3SRH60 60 LINKSCam Sprocket S878 44 TEETH; FOR USE W/3BOLT CAMSHAFT RELUCTOR STYLE

CAM SPROCKET; HALF MOON HUB ON FACECrank Sprocket S827 22 TEETH 22 TEETHChain Damper AdapterBracket

BD417-BRKT 2002-2003 ALLOWS THE USE OF THE LS2 TIMING CHAINDAMPER [BD417] ON ANY GM LS ENGINE BLOCK NOTORIGINALLY EQUIPPED FOR CHAIN DAMPERS; DAMPER NOTINCLUDED EXCLUDES VVT ENGINES

BD417-DBRKT 2002-2003 ALLOWS THE USE OF THE LS2 TIMING CHAINDAMPER [BD417] ON ANY GM LS ENGINE BLOCK NOTORIGINALLY EQUIPPED FOR CHAIN DAMPERS; INCLUDES[BD417] DAMPER EXCLUDES VVT ENGINES


23 5.7 (346) L-HEAD ENG - 1942-48 - 8 Cyl. - 3.50 Bore (SERIES 61,62) (SERIES 60, 75 SPECIALFLEETWOOD) (COMMERCIAL CHASSIS)Chain 349 1942 62 LINKS

349 1946-1948 62 LINKS24 5.7-B,R,8 (350) ENG - 1976-80 - 8 Cyl. - 4.06 Bore (ELDORADO,SEVILLE) EDI,TBI


25 5.7 (350N) DIESEL ENG - 1978-85 - 8 Cyl. - 4.00 Bore (OLDSMOBILE)Chain 180 48 LINKSCrank Sprocket S503 18 TEETH

26 5.7-7 (350) OHV ENG - 1990-93 - 8 Cyl. - 4.06 Bore3pc Set 3-506SC 1990-1991 INCLUDES [499], [S732] & [S391] .40/.41 TOOTH

WIDTH W/BACK BEND. STANDARD DUTY SILENT CHAIN3-506SE 1992-1993 INCLUDES [499], [S732], [S797] .40/.41 TOOTH WIDTH

W/BACK BEND. STANDARD DUTY SILENT CHAINChain 499 46 LINKS .40/.41 TOOTH WIDTH W/BACK BEND; STANDARD

DUTY SILENT CHAINCam Sprocket S732 36 TEETH .40/.41 TOOTH WIDTHCrank Sprocket S391 1990-1991 18 TEETH .40/.41 TOOTH WIDTHContinued on Next Page

37


26 5.7-7 (350) OHV ENG - 1990-93 - 8 Cyl. - 4.06 Bore (Continued)Crank Sprocket S797 1992-1993 18 TEETH .40/.41 TOOTH WIDTH

27 5.7-P (350) ENG - 1994-96 - 8 Cyl. - 4.000 Bore (LT1)3pc Set 3-509SA INCLUDES [499], [S797], [S814]Chain 499 46 LINKSCam Sprocket S814 36 TEETHCrank Sprocket S797 18 TEETH

28 5.7-R (350) OHV ENG - 1999-00 - 8 Cyl. - 4.00 Bore (ESCALADE)3pc Set 3-202SA INCLUDES [202], [S784], [S645] .275/.285 TOOTH WIDTH;

STANDARD DUTY ROLLER CHAIN3-506SE INCLUDES [499], [S732], [S797] .40/.41 TOOTH WIDTH W/BACK

BEND; STANDARD DUTY SILENT CHAINChain 202 46 LINKS .275/.285 TOOTH WIDTH, STANDARD DUTY ROLLER

CHAIN499 46 LINKS 40/.41 TOOTH WIDTH; STANDARD DUTY SILENT

CHAINCam Sprocket S732 36 TEETH .40/.41 TOOTH WIDTH; USE WITH [506] HEAVY DUTY

SILENT CHAINS784 36 TEETH .275/.285 TOOTH WIDTH; USE WITH [202]

STANDARD DUTY ROLLER CHAINCrank Sprocket S645 18 TEETH .275/.285 TOOTH WIDTH; USE WITH [202]

STANDARD DUTY ROLLER CHAINS797 18 TEETH .40/.41 TOOTH WIDTH; USE WITH [506] HEAVY DUTY

SILENT CHAIN29 5.7-S (346) OHV ENG - 2004-05 - 8 Cyl. - 3.90 Bore (GEN III LS6 CTS-V)

3pc Set 3-3SRH60SA INCLUDES [3SRH60], [S878] & [S827]; FOR USE W/3 BOLTCAMSHAFT

Chain 3SRH60 60 LINKSCam Sprocket S878 44 TEETH; FOR USE W/3BOLT CAMSHAFTCrank Sprocket S827 22 TEETH 22 TEETHDamper BD417Chain Damper AdapterBracket

BD417-BRKT 2004 ALLOWS THE USE OF THE LS2 TIMING CHAIN DAMPER[BD417] ON ANY GM LS ENGINE BLOCK NOT ORIGINALLYEQUIPPED FOR CHAIN DAMPERS; DAMPER NOT INCLUDEDEXCLUDES VVT ENGINES

BD417-DBRKT 2004 ALLOWS THE USE OF THE LS2 TIMING CHAIN DAMPER[BD417] ON ANY GM LS ENGINE BLOCK NOT ORIGINALLYEQUIPPED FOR CHAIN DAMPERS; INCLUDES [BD417]DAMPER EXCLUDES VVT ENGINES

30 6.0-N,U (364) OHV ENG - 2002-07 - 8 Cyl. - 4.00 Bore (CTS 2006-07, ESCALADE 2002-06) VORTEC3pc Set 3-3SRH60SA 2002-2006 INCLUDES [3SRH60], [S878] & [S827]; FOR USE W/3

BOLT CAMSHAFT ESCALADE; W/RELUCTOR STYLE CAMSPROCKET; HALF MOON HUB ON FACE

Chain 3SRH60 60 LINKS CTS,ESCALADECam Sprocket S878 2002-2006 44 TEETH; FOR USE W/3BOLT CAMSHAFT

ESCALADE; W/RELUCTOR STYLE CAM SPROCKET; HALFMOON HUB ON FACE; TRUCKS ONLY

Crank Sprocket S827 22 TEETH 22 TEETH CTS,ESCALADEChain Damper AdapterBracket



38


30 6.0-N,U (364) OHV ENG - 2002-07 - 8 Cyl. - 4.00 Bore (CTS 2006-07, ESCALADE 2002-06) VORTEC(Continued)Chain Damper AdapterBracket


31 6.0-5,J (364) OHV ENG - 2009-13 - 8 Cyl. - 4.00 Bore (ESCALADE HYBRID) (LFA,LZ1) VORTECFLEX/ELECTRICChain 3SRH60 60 LINKSCrank Sprocket S827 22 TEETH 22 TEETHChain Tensioner BT5490 2009-2012


33 6.0 (368) 6 & 9 ENG - 1980-84 - 8 Cyl. - 3.800 Bore (6.0-6 CARB.) (6.0-9 EFI)3pc Set 3-498S INCLUDES [498], [S404] & [S405]Chain 498 48 LINKSCam Sprocket S404 36 TEETHCrank Sprocket S405 18 TEETH

34 6.2 (376) OHV ENG - 2007-14 - 8 Cyl. - 4.06 Bore (CTS,ESCALADE) VORTEC GAS/FLEXChain 3SRH60 2007-2013 60 LINKSCrank Sprocket S827 2007-2013 22 TEETH 22 TEETHChain Tensioner BT5490 2007-2012

35 390 ENG - 1959-63 - 8 Cyl. - 4.000 BoreChain 505 46 LINKSCam Sprocket S255 1959-1962 36 TEETH



37 429 ENG - 1964-67 - 8 Cyl. - 4.130 BoreChain 499 1966-1967 46 LINKS

505 1964-1965 46 LINKSCam Sprocket S370 1964-1965 36 TEETH

S404 1966-1967 36 TEETHCrank Sprocket S365 1966-1967 18 TEETH


39 8.2 (500) ENG - 1970-76 - 8 Cyl. - 4.300 Bore3pc Set 3-498S INCLUDES [498], [S404] & [S405]Chain 498 48 LINKSCam Sprocket S404 36 TEETHCrank Sprocket S405 18 TEETH

39

CASE TRACTOREngine Year Line Engine Year Line Engine Year Line

4 Cyl.M38 & F124 1LineNo. Part Title Part No Description

1 M38 & F124 ENG - 4 Cyl. - 3.00 Bore (V SERIES & CONTINENTAL)Crank Gear 2603 24 TEETH

CHEVROLETEngine Year Line Engine Year Line Engine Year Line

3 Cyl.1.0-2 (61) SOHC 1987-92 11.0-5 (61) SOHC 1986-88 21.0-6 (61) SOHC 1989-00 31.0-M (61) OHC 1985 44 Cyl.1.3-3 (79) SOHC 1992-94 51.3-9 (79) SOHC 1995-97 61.3-2 (79) SOHC 1998-01 71.4-I (85) OHC 1976-77 81.5-7 (92) OHC 1985-89 91.5-9 (92) OHC 1987-89 101.6 (98) SOHC 1976-87 111.6-4 (98) SOHC 1985-88 121.6-5 (98) DOHC 1988 131.6-5 (98) DOHC 1990-91 141.6-6 (98) DOHC 1989-97 151.6-6 (98) SOHC 1990-93 161.6-6,E,G (98) DOHC 2004-11 171.8-8 (110) DOHC 1992-97 181.8-8 (110) DOHC 1998-02 191.8-D (110) OHV 1981-86 202.0-1 (122) OHV 1987-89 212.0-B (122) OHV 1983-84 222.0-P (122) OHV 1983-86 232.0-M,P,X (122) DOHC 2005-10 242.2-4 (134) OHV 1992-02 252.2-G (134) OHV 1990-91 262.2-B,D,F,H,6,W (134)DOHC (134) DOHC

2002-11 27

2.3-A (138) DOHC 1990-94 282.3-D (138) DOHC 1995 29140 OHC 1971-77 302.4 (145) DOHC 2006-14 312.4-T (146) DOHC 1996-02 32151-1 1978-79 33151-9 1979 34

4 Cyl. (Continued)

151-V OHV 1978-80 352.5-2 (151) OHV 1982-86 362.5-5 (151) 1980-83 372.5-F (151) OHV 1982-83 382.5-R (151) OHV 1982-92 39153 1962-70 406 Cyl.2.8-1 (173) 1982-84 412.8-7 (173) 1980 422.8-S (173) 1985-89 432.8-W (173) 1985-89 442.8-X (173) 1981-86 452.8-Z (173) 1981-84 463.1-D (189) 1990-95 473.1-J (189) 1999-03 483.1-M (189) OHV 1994-99 493.1-T (189) 1990-94 503.1-W (189) 1993 51194 1962-66 52196 1978-79 53200 1978-79 543.4-E (207) 1996-05 553.4-S (207) 1993-95 563.4-X (207) DOHC 1991-97 573.5-8,L (213) OHV 2004-06 583.5-K,N (213) OHV 2006-11 59217 1942-52 603.6-3,7,V,D (217) DOHC 2008-14 61229 1980-84 62230 1963-70 63231-2 1979 64231-3 1980-81 65231-A 1978-87 663.8-1,K (231) 1995-05 673.8-L (231) 1992-95 68235 1940-62 69

6 Cyl. (Continued)

3.9-1,3,R,W,M (237) OHV 2006-11 70250 1966-79 718 Cyl.262 1975-77 726 Cyl.4.3-Z (262) 1985-93 738 Cyl.265 1955-57 744.3-W (265) 1994-96 75267 1979-82 76283 OHV 1957-67 77302 1967-69 785.0 (305) 1976-93 795.0 (307) 1968-73 805.0-Y (307) 1986-90 815.3-C (325) OHV 2006-09 82327 1962-69 83348 1958-61 84350 1967-71 85350 1972-81 865.7-L,6,7 (350) 1982-93 875.7-N (350N) 1980-85 885.7-8 (350) 1984-92 895.7-8 (350) 1982 905.7-G,S (350) 1997-04 915.7-P (350) 1992-97 926.0-U (364) OHV 2005-07 936.2-W (376) OHV 2008-14 94396 1965-70 95400 1970-76 96402 (400) 1970-72 97409 1958-65 98427 1966-69 997.0-E (427) OHV 2006-13 100454 1970-76 101


1 1.0-2 (61) SOHC ENG - 1987-92 - 3 Cyl. - 74.0 MM Bore (SPRINT) (TURBOCHARGED SUZUKI ENG.)Belt B-0166 1989-1992 97 TEETH

B-095 1987-1988 89 TEETHBelt Tensioner BT139 1987-1988

2 1.0-5 (61) SOHC ENG - 1986-88 - 3 Cyl. - 74.0 MM Bore (2BC-CHEV SPRINT 1986-88, SPRINTMETRO 1987-88)Belt B-095 89 TEETHContinued on Next Page

40

CHEVROLET (Continued)LineNo. Part Title Part No Description

2 1.0-5 (61) SOHC ENG - 1986-88 - 3 Cyl. - 74.0 MM Bore (2BC-CHEV SPRINT 1986-88, SPRINTMETRO 1987-88) (Continued)Belt Tensioner BT139

3 1.0-6 (61) SOHC ENG - 1989-00 - 3 Cyl. - 2.91 Bore (CHEVROLET METRO 1998-00) (GEO METRO1989-97) (SUZUKI ENG)Belt B-0166 1989-1993 97 TEETH 1ST DESIGN USE W/CRANK SPROCKET

HAVING FOUR MOUNTING BOLT HOLESB-0194 1996-2000 97 TEETHB-0241 1993-1995 97 TEETH 2ND DESIGN USE W/CRANK SPROCKET

HAVING FIVE MOUNTING BOLT HOLES4 1.0-M (61) OHC ENG - 1985 - 3 Cyl. - 74 MM Bore (2BC-CHEV SPRINT) (SUZUKI ENG)

Belt B-095 89 TEETHBelt Tensioner BT139

5 1.3-3 (79) SOHC ENG - 1992-94 - 4 Cyl. - 2.91 Bore (GEO METRO BASE, LSI, XFI) SUZUKI 8VENGINE (CANADA ONLY)Belt B-095 1992-1993 89 TEETHBelt Tensioner BT139 1992-1993

6 1.3-9 (79) SOHC ENG - 1995-97 - 4 Cyl. - 2.91 Bore (GEO METRO) SUZUKI 16V ENGINEBelt B-0272 89 TEETH

7 1.3-2 (79) SOHC - 1998-01 - 4 Cyl. - 2.91 Bore (CHEVROLET METRO) SUZUKI 16V ENGINEBelt B-0194 97 TEETH

8 1.4-I (85) OHC ENG - 1976-77 - 4 Cyl. - 3.228 BoreBelt B-037 1976 99 TEETHCrank Sprocket S611 1977 19 TEETH

9 1.5-7,K (92) OHC ENG - 1985-89 - 4 Cyl. - 77 MM Bore (CHEVROLET 2BC-SPECTRUM BASE CL, CLPLUS 1987-88) (GEO 2BC-SPECTRUM BASE 1989) (ISUZU ENG)Belt B-0162 112 TEETHCam Sprocket S626 46 TEETHCrank Sprocket S641 23 TEETHBelt Tensioner BT134

10 1.5-9 (92) OHC ENG - 1987-89 - 4 Cyl. - 77 MM Bore (CHEVROLET TURBO-SPECTRUM 1987-88)(GEO TURBO-SPECTRUM 1989) (ISUZU ENG)Belt B-0162 112 TEETHCam Sprocket S626 46 TEETHCrank Sprocket S641 23 TEETHBelt Tensioner BT134

11 1.6 (98) SOHC ENG - 1976-87 - 4 Cyl. - 3.228 Bore (CHEVETTE) (1976-78 1.6-E) (1978 1.6-J)(1979-80 1.6-O) (1980-81 1.6-9) (1982-87 1.6-C)Belt B-037 1976 99 TEETH

B-039 1977-1978 99 TEETHB-061 1979-1987 100 TEETH

Crank Sprocket S611 1977-1987 19 TEETH12 1.6-4 (98) SOHC ENG - 1985-88 - 4 Cyl. - 3.07 Bore (NOVA) (LC9 TOYOTA ENG)

Timing Kit B-070-1 KIT INCLUDES [B-070], [S560], [S551] & [BT66]Belt B-070 88 TEETHCam Sprocket S560 36 TEETHCrank Sprocket S551 18 TEETHBelt Tensioner BT66

13 1.6-5 (98) DOHC ENG - 1988-88 - 4 Cyl. - 80.0 MM Bore (NOVA TWIN CAM)Belt B-0112 113 TEETH

41


14 1.6-5 (98) DOHC ENG - 1990-91 - 4 Cyl. - 80 MM Bore (EFI-GEO PRIZM, STORM) (LWO ISUZU ENG)Belt B-0169 159 TEETH

15 1.6-6 (98) DOHC ENG - 1989-97 - 4 Cyl. - 81 MM Bore (EFI-GEO PRIZM) ( LO1 TOYOTA ENG)Belt B-0236 1993-1997 117 TEETH


BT66 1989-199216 1.6-6 (98) SOHC ENG - 1990-93 - 4 Cyl. - 80 MM Bore (EFI-GEO STORM) (LO1 ISUZU ENG)

Belt B-0177 112 TEETH17 1.6-6,E,G (98) DOHC ENG - 2004-11 - 4 Cyl. - 3.11 Bore (AVEO, AVEO5)

Belt B-0310 2004-2006 127 TEETH18 1.8-8 (1788CC) DOHC ENG - 1992-97 - 4 Cyl. - 81.0 MM Bore (GEO PRIZM,STORM) (TOYOTA ENG)

Belt B-0205 1992-1993 163 TEETH STORMB-0235 1993-1997 121 TEETH PRIZM

Belt Tensioner BT342 1993-1997 PRIZM19 1.8-8 (110) DOHC ENG - 1998-02 - 4 Cyl. - 3.19 Bore (CHEVROLET PRIZM) (TOYOTA ENG)

Timing Kit 3-4200SA 1999-2002 SOLD AS KIT ONLY; KIT INCLUDES (1) CHAIN,(1)TENSIONER,(2) GUIDES,(1) CAM SPROCKET,(1) CRANKSPROCKET, (1) SEAL, (2) SHIMS, (1) PIVOT BOLT

20 1.8-D (110) OHV ENG - 1981-86 - 4 Cyl. - 3.31 Bore CHEVETTE (DIESEL) (ISUZU ENG)Belt B-076 134 TEETHBelt Guide BG94

21 2.0-1 (122) OHV ENG - 1987-89 - 4 Cyl. - 3.39 Bore (BERETTA,CAVALIER,CORSICA) (TBI)3pc Set 3-370S INCLUDES [395], [S558], [S549] & [MPC-393]Chain 395 58 LINKSCam Sprocket S558 40 TEETHCrank Sprocket S549 20 TEETHChain Tensioner BT5115

22 2.0-B (122) OHV ENG - 1983-84 - 4 Cyl. - 3.39 Bore (CAVALIER) (2BC)3pc Set 3-370S INCLUDES [395], [S558], [S549] & [MPC-393]Chain 395 58 LINKSCam Sprocket S558 40 TEETHCrank Sprocket S549 20 TEETHChain Tensioner BT5115

23 2.0-P (122) OHV ENG - 1983-86 - 4 Cyl. - 3.39 Bore (CAVALIER) (TBI)3pc Set 3-370S INCLUDES [395], [S558], [S549] & [MPC-393]Chain 395 58 LINKSCam Sprocket S558 40 TEETHCrank Sprocket S549 20 TEETHChain Tensioner BT5115

24 2.0-M,P,X (122) DOHC ENG - 2005-10 - 4 Cyl. - 3.38 & 3.39 Bore (VIN P COBALT SUPERCHARGED)(VIN M,X COBALT, HHR TURBOCHARGED) ECOTECTiming Kit 3-4201S KIT INCLUDES [4201F], (2) [S850], [S849], [BT5481], [BG5375],

[BG5381], [BG5382], [5467N], (2) [5496B] (INCLUDESSPROCKETS) CAMSHAFT CHAIN KIT

3-4201SX KIT INCLUDES [4201F], [BT5481], [BG5375], [BG5381], [BG5382],[5467N] (DOES NOT INCLUDE SPROCKETS) CAMSHAFT CHAINKIT

3-4202S KIT INCLUDES [4202F], [S853], [S855], [S851], [BT5383],[BG5384], [BG5385], [BG5386] BALANCE SHAFT CHAIN KIT

Oil Jet Nozzle 5467NCamshaft Bolt 5496B TORQUE TO YIELD BOLT 2 REQUIREDContinued on Next Page

42


24 2.0-M,P,X (122) DOHC ENG - 2005-10 - 4 Cyl. - 3.38 & 3.39 Bore (VIN P COBALT SUPERCHARGED)(VIN M,X COBALT, HHR TURBOCHARGED) ECOTEC (Continued)Chain 4201F 148 LINKS CAMSHAFT CHAIN

4202F 134 LINKS BALANCE SHAFT CHAINCam Sprocket S850 46 TEETH EXH. CAMSHAFT CHAIN SPROCKET

S850 46 TEETH INT. CAMSHAFT CHAIN SPROCKETCrank Sprocket S849 23 TEETH OUTER

S851 42 TEETH INNERBalance Shaft Sprocket S853 21 TEETH LEFT HAND; INTAKEWater Pump Sprocket S911 40 TEETHChain Tensioner BT5383 BALANCE SHAFT CHAIN TENSIONER; LOWER

BT5481 NEW DESIGN W/10.0mm DIA. PLUNGER; 82.0mm O.A.LCAMSHAFT CHAIN TENSIONER; RIGHT HAND UPPER

Chain Guide BG5375 CAMSHAFT CHAIN GUIDE; RIGHT HANDBG5381 CAMSHAFT CHAIN GUIDE; LEFT HANDBG5382 CAMSHAFT CHAIN GUIDE; CENTER UPPERBG5384 BALANCE SHAFT CHAIN GUIDE; RIGHT HAND LOWERBG5385 BALANCE SHAFT CHAIN GUIDE; LEFT HAND LOWERBG5386 BALANCE SHAFT CHAIN GUIDE; UPPER

25 2.2-4 (134) OHV ENG - 1992-02 - 4 Cyl. - 3.500 Bore BARETTA, CAVALIER, CORSICA3pc Set 3-370S 1992-1993 INCLUDES [395], [S558], [S549] & [MPC-393]

3-370SA 1994-2002 INCLUDES [395], [S774], [S549] & [MPC-393]3-395S 1994-2002 INCLUDES [370], [S774], [S549], [BT5115] & [MPC-393]

RETRO FIT FINE FINISH CHAIN SET, CHECK FOR POSSIBLEOILING PROBLEM WHEN INSTALLING SET.

Chain 395 58 LINKSCam Thrust Plate Spacer MG221 1992-1996Cam Sprocket S558 1992-1993 40 TEETH

S774 1994-2002 40 TEETHCrank Sprocket S549 20 TEETHChain Tensioner BT5115 FOR USE WITH BOTH [370] AND [395] CHAINS

26 2.2-G (134) OHV ENG - 1990-91 - 4 Cyl. - 3.44 Bore3pc Set 3-370S INCLUDES [395], [S558], [S549] & [MPC-393]Chain 395 58 LINKSCam Sprocket S558 40 TEETHCrank Sprocket S549 20 TEETHChain Tensioner BT5115

27 2.2-B,D,F,H,6,W (134) DOHC ENG - 2002-11 - 4 Cyl. - 3.39 Bore (L61 ENG ECOTEC) (CAVALIER,COBALT, CLASSIC, HHR, MALIBU) INCLUDES BI FUELTiming Kit 3-4201S KIT INCLUDES [4201F], (2) [S850], [S849], [BT5481], [BG5375],




Oil Jet Nozzle 5467NCamshaft Bolt 5496B TORQUE TO YIELD BOLT 2 REQUIREDChain 4201F 148 LINKS CAMSHAFT CHAIN

4202F 134 LINKS BALANCE SHAFT CHAINCam Sprocket S850 46 TEETH EXH.

S850 46 TEETH INT.Continued on Next Page

43


27 2.2-B,D,F,H,6,W (134) DOHC ENG - 2002-11 - 4 Cyl. - 3.39 Bore (L61 ENG ECOTEC) (CAVALIER,COBALT, CLASSIC, HHR, MALIBU) INCLUDES BI FUEL (Continued)Crank Sprocket S849 23 TEETH OUTER

S851 42 TEETH INNERBalance Shaft Sprocket S853 21 TEETH LEFT HAND; INTAKE

S855 21 TEETH RIGHT HAND; EXHAUSTWater Pump Sprocket S911 40 TEETHChain Tensioner BT5383 BALANCE SHAFT CHAIN TENSIONER

BT5481 NEW DESIGN W/10.0mm DIA. PLUNGER; 82.0mm O.A.LCAMSHAFT CHAIN TENSIONER

Chain Guide BG5375 CAMSHAFT CHAIN GUIDE; RIGHT HANDBG5381 CAMSHAFT CHAIN GUIDE; LEFT HANDBG5382 CAMSHAFT CHAIN GUIDE; UPPERBG5384 BALANCE SHAFT CHAIN GUIDE; RIGHT HANDBG5385 BALANCE SHAFT CHAIN GUIDE; LEFT HANDBG5386 BALANCE SHAFT CHAIN GUIDE; UPPER

28 2.3-A (138) DOHC ENG - 1990-94 - 4 Cyl. - 3.62 Bore3pc Set 3-383S 1992-1994 INCLUDES [383], (2) [S734] & [S747] 2ND DES.;

SINGLE ROW3-3DR130 1990-1991 INCLUDES [3DR130], (2) [S692] & [S653] 1ST DES.;

DOUBLE ROWChain 383 1992-1994 130 LINKS STANDARD FINISH CHAIN 2ND DES.;

SINGLE ROW383M 1992-1994 130 LINKS FINE FINISH CHAIN 2ND DES.; SINGLE

ROW3DR130 1990-1991 130 LINKS 1ST DES.; DOUBLE ROW

Cam Sprocket S692 1990-1991 38 TEETH (2) REQ.; 1ST DES.; DOUBLE ROWS734 1992-1994 38 TEETH (2) REQ.; 2ND DES.; SINGLE ROW

Crank Sprocket S653 1990-1991 19 TEETH 1ST DES.; DOUBLE ROWS747 1992-1994 19 TEETH 2ND DES.; SINGLE ROW

Chain Tensioner BT188 1990-1991 1ST DES.Chain Guide BG304 1992-1994 2ND DES.; 23MM WIDE; RIGHT HAND

BG305 1992-1994 2ND DES.; 23MM WIDE; LEFT HANDBG306 1992-1994 2ND DES.; 23MM WIDE; UPPER

29 2.3-D (138) DOHC ENG - 1995 - 4 Cyl. - 3.62 BoreTiming Kit 3-383SB KIT INCLUDES [383], (2) [S734], [S747], [BG304], [BG305] &


3pc Set 3-383S INCLUDES [383], (2) [S734] & [S747]Chain 383 130 LINKS STANDARD FINISH CHAIN

383M 130 LINKS FINE FINISH CHAINCam Sprocket S734 38 TEETH (2) REQ.Crank Sprocket S747 19 TEETHChain Guide BG304 RIGHT HAND


30 140 OHC ENG - 1971-77 - 4 Cyl. - 3 1/2 Bore (VEGA)Belt B-012 91 TEETHCam Sprocket S426 36 TEETH

44


31 2.4 (145) DOHC ENG - 2006-14 - 4 Cyl. - 3.46 Bore (COBALT,HHR,IMPALA,MALIBU,ORLANDO)(GAS,FLEX,ELECTRIC) ECOTECTiming Kit 3-4201S 2006-2008 KIT INCLUDES [4201F], (2) [S850], [S849], [BT5481],

[BG5375], [BG5381], [BG5382], [5467N], (2) [5496B] (INCLUDESSPROCKETS) COBALT ONLY; CAMSHAFT CHAIN KIT

3-4201SX 2006-2012 KIT INCLUDES [4201F], [BT5481], [BG5375], [BG5381],[BG5382], [5467N] (DOES NOT INCLUDE SPROCKETS) EXC.ORLANDO; CAMSHAFT CHAIN KIT

3-4202S 2006-2012 KIT INCLUDES [4202F], [S853], [S855], [S851],[BT5383], [BG5384], [BG5385], [BG5386] EXC. ORLANDO;BALANCE SHAFT CHAIN KIT

Oil Jet Nozzle 5467N 2006-2012 EXC. ORLANDOChain 4201F 2006-2012 148 LINKS EXC. ORLANDO; CAMSHAFT CHAIN

4202F 2006-2012 134 LINKS EXC. ORLANDO; BALANCE SHAFT CHAINCam Sprocket S850 2006-2008 46 TEETH 2 REQ. COBALT ONLYCrank Sprocket S849 2006-2012 23 TEETH EXC. ORLANDO; OUTER

S851 2006-2012 42 TEETH EXC. ORLANDO; INNERBalance Shaft Sprocket S853 2006-2012 21 TEETH EXC. ORLANDO; LEFT HAND; INTAKE

S855 2006-2012 21 TEETH EXC. ORLANDO; RIGHT HAND; EXHAUSTChain Tensioner BT5383 2006-2012 EXC. ORLANDO; BALANCE SHAFT CHAIN

TENSIONERBT5481 2006-2012 NEW DESIGN W/10.0mm DIA. PLUNGER; 82.0mm

O.A.L EXC. ORLANDO; CAMSHAFT CHAIN TENSIONERChain Guide BG5375 2006-2012 EXC. ORLANDO; CAMSHAFT CHAIN GUIDE; RIGHT

HANDBG5381 2006-2012 EXC. ORLANDO; CAMSHAFT CHAIN GUIDE; LEFT

HANDBG5382 2006-2012 EXC. ORLANDO; CAMSHAFT CHAIN GUIDE; UPPERBG5384 2006-2012 EXC. ORLANDO; BALANCE SHAFT CHAIN GUIDE;

RIGHT HANDBG5385 2006-2012 EXC. ORLANDO; BALANCE SHAFT CHAIN GUIDE;

LEFT HANDBG5386 2006-2012 EXC. ORLANDO; BALANCE SHAFT CHAIN GUIDE;

UPPER32 2.4-T (146) DOHC ENG - 1996-02 - 4 Cyl. - 3.54 Bore

Timing Kit 3-390SA 1997-2002 KIT INCLUDES [390], (2) [S804T], [S805], [BT355],[BT356], [BG365], [BG366], [BG367]

3pc Set 3-390S INCLUDES [390], (2) [S804T], [S805]Chain 390 130 LINKSCam Sprocket S804T 38 TEETH 2 REQUIREDCrank Sprocket S805 19 TEETHChain Tensioner BT355 1997-2002 TENSIONER ARM

BT356 1997-2002 HYDRAULIC (2ND DESIGN)Chain Guide BG365 RIGHT HAND; CAMSHAFT

BG366 LEFT HAND; CAMSHAFTBG367 UPPER; CAMSHAFTBG368 BALANCE SHAFT

33 151-1 ENG - 1978-79 - 4 Cyl. - 4.000 Bore (PONTIAC)Gear Set 2538S ALUM. INCLUDES [2524] & [2537]



45


34 151-9 ENG - 1979 - 4 Cyl. - 4.000 Bore (PONTIAC)Gear Set 2538S ALUM. INCLUDES [2524] & [2537]



35 151-V OHV ENG - 1978-80 - 4 Cyl. - 4.000 Bore (PONTIAC)Gear Set 2538S ALUM. INCLUDES [2524] & [2537]



36 2.5-2 (151) OHV ENG - 1982-86 - 4 Cyl. - 4.000 Bore (PONTIAC)Gear Set 2538S ALUM. INCLUDES [2524] & [2537]



37 2.5-5 (151) ENG - 1980-83 - 4 Cyl. - 4.000 Bore (PONTIAC)Gear Set 2538S ALUM. INCLUDES [2524] & [2537]



38 2.5-F (151) OHV ENG - 1982-83 - 4 Cyl. - 4.000 Bore (PONTIAC) (EXPORT ONLY)Gear Set 2538S ALUM. INCLUDES [2524] & [2537]



39 2.5-R (151) OHV ENG - 1982-92 - 4 Cyl. - 4.000 Bore (PONTIAC) (FOR VANS SEECHEVROLET/GMC TRUCKS)3pc Set 3-378SA 1991-1992 INCLUDES [378], [S690] & [S713]Chain 378 1991-1992 56 LINKSGear Set 2538S 1982-1990 ALUM. INCLUDES [2524] & [2537]



40 153 ENG - 1962-70 - 4 Cyl. - 3 7/8 BoreGear Set 2525S INCLUDES [2524] & [2501]Cam Gear 2524 54 TEETH ALUMINUM

2542 54 TEETH FIBERCrank Gear 2501 27 TEETHContinued on Next Page

46


40 153 ENG - 1962-70 - 4 Cyl. - 3 7/8 Bore (Continued)Cam Thrust Plate Spacer MG221

41 2.8-1 (173) ENG - 1982-84 - V6 - 89 MM Bore3pc Set 3-373S INCLUDES [373], [S506] & [S511]Chain 373 64 LINKSCam Sprocket S506 40 TEETHCrank Sprocket S511 20 TEETHDamper BD59

42 2.8-7 (173) ENG - 1980 - V6 - 89 MM Bore3pc Set 3-373S INCLUDES [373], [S506] & [S511]Chain 373 64 LINKSCam Sprocket S506 40 TEETHCrank Sprocket S511 20 TEETHDamper BD59

43 2.8-S (173) ENG - 1985-89 - V6 - 89 MM Bore3pc Set 3-373S INCLUDES [373], [S506] & [S511]Chain 373 64 LINKSCam Sprocket S506 40 TEETHCrank Sprocket S511 20 TEETHDamper BD59

44 2.8-W (173) ENG - 1985-89 - V6 - 89 MM Bore3pc Set 3-372S 1985-1986 INCLUDES [385], [S620] & [S619] CAVALIER

3-372S 1987-1989 INCLUDES [385], [S620] & [S619]3-373S 1985-1986 INCLUDES [373], [S506] & [S511] CELEBRITY &

CITATIONChain 373 1985-1986 64 LINKS CELEBRITY & CITATION

385 1985-1986 64 LINKS CAVALIER385 1987-1989 64 LINKS

Cam Sprocket S506 1985-1986 40 TEETH CELEBRITY & CITATIONS620 1985-1986 40 TEETH CAVALIERS620 1987-1989 40 TEETH

Crank Sprocket S511 1985-1986 20 TEETH CELEBRITY & CITATIONS619 1985-1986 20 TEETH CAVALIERS619 1987-1989 20 TEETH

Damper BD131 1985-1986 CADET & CAVALIERBD131 1987-1989BD59 1985-1986 EXC. CADET & CAVALIER

45 2.8-X (173) ENG - 1981-86 - V6 - 89 MM Bore3pc Set 3-373S INCLUDES [373], [S506] & [S511]Chain 373 64 LINKSCam Sprocket S506 40 TEETHCrank Sprocket S511 20 TEETHDamper BD59

46 2.8-Z (173) ENG - 1981-84 - V6 - 89 MM Bore3pc Set 3-373S INCLUDES [373], [S506] & [S511]Chain 373 64 LINKSCam Sprocket S506 40 TEETHCrank Sprocket S511 20 TEETHDamper BD59

47 3.1-D (189) ENG - 1990-95 - V6 - 3.50 Bore (LUMINA APV VAN)3pc Set 3-372S INCLUDES [385], [S620] & [S619]Chain 385 64 LINKSCam Sprocket S620 40 TEETHContinued on Next Page

47


47 3.1-D (189) ENG - 1990-95 - V6 - 3.50 Bore (LUMINA APV VAN) (Continued)Crank Sprocket S619 20 TEETHDamper BD131 1990-1993

48 3.1-J (189) ENG - 1999-03 - V6 - 3.50 Bore (LUMINA, MAILBU)Timing Kit 3-385SC 1999 KIT INCLUDES [385], [S619], [S756], [BD336]

3-700SB 2000-2003 KIT INCLUDES [700], [S847], [S848], [BD600]3pc Set 3-385S 1999 INCLUDES [385], [S756] & [S619]

3-700S 2000-2003 INCLUDES [700], [S847], [S848]Chain 385 1999 64 LINKS

700 2000-2003 80 LINKSCam Sprocket S756 1999 40 TEETH

S848 2000-2003 50 TEETHCrank Sprocket S619 1999 20 TEETH

S847 2000-2003 25 TEETHDamper BD336 1999

BD600 2000-200349 3.1-M (189) OHV ENG - 1994-99 - V6 - 3.50 Bore

Timing Kit 3-385SC 1994-1998 KIT INCLUDES [385], [S619], [S756], [BD336]3-385SC 1999 KIT INCLUDES [385], [S619], [S756], [BD336] 1ST DES.3-700SB 1999 KIT INCLUDES [700], [S847], [S848], [BD600] 2ND DES.

W/79 LINK CHAIN; 50 TOOTH CAM SPROCKET; 25 TOOTHCRANK SPROCKET





Cam Thrust Plate Spacer MG221 1994-1995Cam Sprocket S756 1994-1998 40 TEETH

S756 1999 40 TEETH 1ST DES.S848 1999 50 TEETH 2ND DES.


Damper BD336 1994-1999 1ST. DES.BD600 1999 2ND DES.

50 3.1-T (189) ENG - 1990-94 - V6 - 3.503 Bore3pc Set 3-372S INCLUDES [385], [S620] & [S619] EXC. CAMARO

3-373S 1990-1992 INCLUDES [373], [S506] & [S511] CAMARO ONLYChain 373 1990-1992 64 LINKS CAMARO ONLY

385 64 LINKS EXC. CAMAROCam Sprocket S506 1990-1992 40 TEETH CAMARO ONLY

S620 40 TEETH EXC. CAMAROCrank Sprocket S511 1990-1992 20 TEETH CAMARO ONLY

S619 20 TEETH EXC. CAMARODamper BD131 1990-1993 EXC. CAMARO

BD59 1990-1992 CAMARO

48


51 3.1-W (189) ENG - 1993 - V6 - 3.50 Bore3pc Set 3-372S INCLUDES [385], [S620] & [S619]Chain 385 64 LINKSCam Sprocket S620 40 TEETHCrank Sprocket S619 20 TEETHDamper BD131



53 196 ENG - 1978-79 - V6 - 3 1/2 Bore (BUICK)3pc Set 3-359SB INCLUDES [359], [S610] & [S323]Chain 359 54 LINKSCam Button CB100 W/SPRINGCam Sprocket S610 40 TEETHCrank Sprocket S323 20 TEETHDamper BD44 RIGHT HAND W/SPRING

BD45 LEFT HAND54 200 ENG - 1978-79 - V6 - 3 1/2 Bore

3pc Set 3-163S INCLUDES [163], [S288] & [S289] H.D.3-499SA INCLUDES [499], [S390] & [S505]

Chain 163 58 LINKS H.D.499 46 LINKS

Cam Sprocket S288 44 TEETH H.D.S390 36 TEETH

Crank Sprocket S289 22 TEETH H.D.S505 18 TEETH

55 3.4-E (207) ENG - 1996-05 - V6 - 3.62 Bore (1996 LUMINA VAN) (1997-05 VENTURE) (2000-05MONTE CARLO & IMPALA)Timing Kit 3-385SC 1996-1999 KIT INCLUDES [385], [S619], [S756], [BD336]

3-700SB 2000-2005 KIT INCLUDES [700], [S847], [S848], [BD600]3pc Set 3-385S 1996-1999 INCLUDES [385], [S756] & [S619]

3-700S 2000-2005 INCLUDES [700], [S847], [S848]Chain 385 1996-1999 64 LINKS



S847 2000-2005 25 TEETHDamper BD336 1996-1999

BD600 2000-200556 3.4-S (207) ENG - 1993-95 - V6 - 3.62 Bore

3pc Set 3-373S INCLUDES [373], [S506] & [S511]Chain 373 64 LINKSCam Sprocket S506 40 TEETHCrank Sprocket S511 20 TEETHDamper BD59 1993

57 3.4-X (207) DOHC ENG - 1991-97 - V6 - 3.62 Bore3pc Set 3-382S INCLUDES [382], [S719] & [S758]Chain 382 64 LINKS CRANKSHAFT TO INTERMEDIATE SHAFTBelt B-0192 1991-1995 169 TEETH INTERMEDIATE SHAFT TO CAMSHAFTSContinued on Next Page

49


57 3.4-X (207) DOHC ENG - 1991-97 - V6 - 3.62 Bore (Continued)Belt B-0273 1996-1997 200 TEETH INTERMEDIATE SHAFT TO CAMSHAFTSCrank Sprocket S719 20 TEETHIntermediate Sprocket S758 40 TEETH CHAIN DRIVEBelt Tensioner BT308 CHAIN DRIVE

58 3.5-8,L (213) OHV ENG - 2004-06 - 6 Cyl. - 3.70 Bore (MALIBU 2004-06), (UPLANDER 2005-06)Timing Kit 3-700SB KIT INCLUDES [700], [S847], [S848], [BD600]3pc Set 3-700S INCLUDES [700], [S847], [S848]Chain 700 80 LINKSCam Sprocket S848 50 TEETHCrank Sprocket S847 25 TEETHDamper BD600 MALIBU

59 3.5-K,N (213) OHV ENG - 2006-11 - 6 Cyl. - 3.90 Bore (IMPALA, MALIBU, MONTE CARLO)INCLUDES FLEX FUELChain 700 80 LINKSCrank Sprocket S847 25 TEETH

60 217 ENG - 1942-52 - 6 Cyl. - 3 1/2 Bore (NOT PRODUCED 1943-45)Gear Set 2516S INCLUDES [2514] & [2501]Cam Gear 2514 54 TEETH ALUMCrank Gear 2501 27 TEETH

61 3.6-3,7,V,D (217) DOHC ENG - 2008-14 - 6 Cyl. - 3.70 Bore (MALIBU,CAMARO,IMPALA,CAPRICE)GAS/FLEXTiming Kit 3-753S 2008-2010 INCLUDES [753], (2) [754], [S921], [S930], [S932],

[BT5535], [BT5536], [BT5537], [BG5548], [BG5530], [BG5531],[BG5532], [BG5533], [BG5534] 2010 CAMARO, MALIBU; FORENGINES USING SILENT TYPE CHAINS

Chain 753 2008-2013 96 LINKS PRIMARY CHAIN; LOWER754 2008-2013 114 LINKS SECONDARY CHAIN; UPPER (2)

REQUIREDCrank Sprocket S921 30 TEETH EXC. MALIBUIdler Sprocket S930 2008-2013 22 TEETH INCLUDES MOUNTING BOLT LEFT HAND;

EXC. 2011-13 CAMARO & CAPRICES932 2008-2013 22 TEETH INCLUDES MOUNTING BOLT RIGHT

HAND; EXC. 2011-13 CAMARO & CAPRICEChain Tensioner BT5535 2008-2013 INCLUDES GASKET AND 2 MOUNTING BOLTS

SECONDARY CHAIN; LEFT HANDBT5536 2008-2013 INCLUDES GASKET AND 2 MOUNTING BOLTS

SECONDARY CHAIN; RIGHT HANDBT5537 2008-2013 INCLUDES MOUNTING GASKET AND 2 MOUNTING

BOLTS PRIMARY CHAIN; 2010 CAMARO, 2012-13 IMPALA &2008-10 MALIBU

Chain Guide BG5530 2008-2013 INCLUDES (2) MOUNTING BOLTS PRIMARY CHAIN;UPPER; EXC. CAPRICE


BG5532 2008-2013 INCLUDES 2 MOUNTING BOLTS SECONDARYCHAIN; RIGHT HAND; EXC. CAPRICE

BG5533 2008-2013 PRIMARY CHAIN; RIGHT HAND; EXC. CAPRICEBG5534 2008-2013 PRIMARY CHAIN; LEFT HAND; LOWER; EXC.

CAPRICEBG5548 2008-2012 PRIMARY CHAIN; RIGHT HAND; LOWER; 2010

CAMARO, 2008-12 MALIBU

50


62 229 ENG - 1980-84 - V6 - 3.736 Bore (INC.EL CAMINO)3pc Set 3-163S INCLUDES [163], [S288] & [S289] H.D.

3-499SA INCLUDES [499], [S390] & [S505]Chain 163 58 LINKS H.D.

499 46 LINKSCam Sprocket S288 44 TEETH H.D.

S390 36 TEETHCrank Sprocket S289 22 TEETH H.D.

S505 18 TEETH63 230 ENG - 1963-70 - 6 Cyl. - 3 7/8 Bore

Gear Set 2525S INCLUDES [2524] & [2501]Cam Gear 2524 54 TEETH ALUMINUM


64 231-2 ENG - 1979 - V6 - 3.78 Bore BUICK ENG3pc Set 3-359SB INCLUDES [359], [S610] & [S323]Chain 359 54 LINKSCam Button CB100 W/SPRINGCam Sprocket S610 40 TEETHCrank Sprocket S323 20 TEETHDamper BD44 RIGHT HAND W/SPRING

BD45 LEFT HAND65 231-3 ENG - 1980-81 - V6 - 3.800 Bore (BUICK)


BD45 LEFT HAND66 231-A ENG - 1978-87 - V6 - 3.80 Bore (BUICK ENG)(FOR CABALLERO & EL CAMINO SEE TRUCKS)


BD45 1978-1981 LEFT HAND67 3.8-1,K (231) ENG - 1995-05 - V6 - 3.800 Bore (M.F.I.) (3.8-1 S/C) (3.8-K NON S/C)

3pc Set 3-381AS INCLUDES [381A], [S810], [S811] (NON SUPERCHARGED)3-381ASB 2004-2005 INCLUDES [381A], [S811] & [S812] (SUPERCHARGED)

Chain 381A 64 LINKSCam Sprocket S810 48 TEETH NON SUPERCHARGED

S812 2004-2005 48 TEETH SUPERCHARGEDCrank Sprocket S811 24 TEETHDamper BD344

68 3.8-L (231) ENG - 1992-95 - V6 - 3.800 Bore (LUMINA VAN)3pc Set 3-375SA 1992-1994 INCLUDES [375], [S716] & [S729]


381A 1995 64 LINKSCam Sprocket S716 1992-1994 40 TEETHContinued on Next Page

51


68 3.8-L (231) ENG - 1992-95 - V6 - 3.800 Bore (LUMINA VAN) (Continued)Cam Sprocket S810 1995 48 TEETHCrank Sprocket S729 1992-1994 20 TEETH

S811 1995 24 TEETHDamper BD295 1992 2ND DES. W/COUNTER- BORED DAMPER BOLT HOLE

BD295 1993-1994BD344 1995BD58 1992 1ST DES. W/CHAMFERED DAMPER BOLT HOLE

69 235 ENG - 1940-62 - 6 Cyl. - 3.56 BoreGear Set 2516S INCLUDES [2514] & [2501] W/ALUMINUM CAM GEARCam Gear 2500 54 TEETH FIBER

2514 54 TEETH ALUMCrank Gear 2501 27 TEETH

70 3.9-1,3,R,W,M (237) OHV ENG - 2006-11 - 6 Cyl. - 3.90 Bore (IMPALA,MALIBU,MONTECARLO,UPLANDER) GAS/FLEX FUELChain 700 80 LINKSCrank Sprocket S847 25 TEETH

71 250 ENG - 1966-79 - 6 Cyl. - 3.88 Bore (INCLUDES CARS ONLY)Gear Set 2525S 1966-1976 INCLUDES [2524] & [2501] W/INT. MANIFOLD & CYL.

HEAD CAST SEPARATE2528S 1975-1976 ALUM. CAM GEAR & STEEL CRANK GEAR H.D.

W/INTAKE MANIFOLD & CYL. HEAD CAST SEPARATE2538S 1975-1976 ALUM. INCLUDES [2524] & [2537] TO EARLY 76

W/INTAKE MANIFOLD CAST AS INTEGRAL PART OF CYL. HEAD2540S 1976-1979 INCLUDES [2526] & [2541] LATE 1976 W/INTAKE

MANIFOLD CAST AS INTEGRAL PART OF CYL. HEADCam Gear 2524 1966-1977 54 TEETH ALUMINUM W/GEAR STAMPED #14

2526 1975-1979 54 TEETH W/GEAR STAMPED #202542 1966-1977 54 TEETH FIBER W/GEAR STAMPED #14

Crank Gear 2501 1966-1976 27 TEETH W/INT. MANIFOLD & CYL. HEAD CASTSEPARATE

2527 1975-1976 27 TEETH H.D. W/INTAKE MANIFOLD & CYL. HEADCAST SEPARATE

2537 1975-1976 27 TEETH TO EARLY 1976 W/CAM GEAR STAMPED#14 & CRANK GEAR STAMPED #71 & INTAKE MANIFOLD CASTAS INTEGRAL PART OF CYL. HEAD

Cam Thrust Plate Spacer MG22172 262 ENG - 1975-77 - 8 Cyl. - 3.67 Bore (MONZA,NOVA)

3pc Set 3-163S INCLUDES [163], [S288] & [S289] HEAVY DUTY3-499S INCLUDES [499], [S390] & [S391] STANDARD DUTY

Chain 163 58 LINKS HEAVY DUTY499 46 LINKS STANDARD DUTY

Cam Sprocket S288 44 TEETH HEAVY DUTYS390 36 TEETH STANDARD DUTY

Crank Sprocket S289 22 TEETH HEAVY DUTYS391 18 TEETH STANDARD DUTY

73 4.3-Z (262) ENG - 1985-93 - V6 - 4.000 Bore (4.3-Z NOT USED IN 1991)3pc Set 3-499SA 1985-1986 INCLUDES [499], [S390] & [S505]

3-506SB 1987-1993 INCLUDES [499], [S732] & [S505]Chain 499 46 LINKSCam Sprocket S390 1985-1986 36 TEETH

S732 1987-1993 36 TEETHCrank Sprocket S505 18 TEETH

52


74 265 ENG - 1955-57 - 8 Cyl. - 3 3/4 Bore3pc Set 3-163S INCLUDES [163], [S288] & [S289] H.D.

3-489S INCLUDES [505],[S261] & [S262]Chain 163 58 LINKS H.D.

505 46 LINKSCam Sprocket S261 36 TEETH

S288 44 TEETH H.D.Crank Sprocket S262 18 TEETH

S289 22 TEETH H.D.75 4.3-W (265) ENG - 1994-96 - 8 Cyl. - 3.67 Bore

3pc Set 3-509SA INCLUDES [499], [S797], [S814]Chain 499 46 LINKSCam Sprocket S814 36 TEETHCrank Sprocket S797 18 TEETH

76 267 ENG - 1979-82 - 8 Cyl. - 3 1/2 Bore3pc Set 3-163S INCLUDES [163], [S288] & [S289] HEAVY DUTY




S391 18 TEETH STANDARD DUTY77 283 OHV ENG - 1957-67 - 8 Cyl. - 3.88 Bore

3pc Set 3-163S INCLUDES [163], [S288] & [S289] HEAVY DUTY3-489S 1957-1966 INCLUDES [505],[S261] & [S262] STANDARD DUTY3-499S 1967 INCLUDES [499], [S390] & [S391] STANDARD DUTY

Chain 163 58 LINKS HEAVY DUTY499 1967 46 LINKS STANDARD DUTY505 1957-1966 46 LINKS STANDARD DUTY

Cam Sprocket S261 1957-1966 36 TEETH STANDARD DUTYS288 44 TEETH HEAVY DUTYS390 1967 36 TEETH STANDARD DUTY

Crank Sprocket S262 1957-1966 18 TEETH STANDARD DUTYS289 22 TEETH HEAVY DUTYS391 1967 18 TEETH STANDARD DUTY

78 302 ENG - 1967-69 - 8 Cyl. - 4.000 Bore (SPECIAL ENGINE FOR CAMARO)3pc Set 3-163S INCLUDES [163], [S288] & [S289] HEAVY DUTY




S391 18 TEETH STANDARD DUTY79 5.0 (305) ENG - 1976-93 - 8 Cyl. - 3.74 Bore (CARS ONLY FOR VAN LISTINGS SEE TRUCKS)

3pc Set 3-163S 1976-1986 INCLUDES [163], [S288] & [S289] HEAVY DUTY3-499S 1976-1987 INCLUDES [499], [S390] & [S391] STANDARD DUTY

EXCLUDES ROLLER CAM3-506SC 1987-1993 INCLUDES [499], [S732] & [S391] STANDARD DUTY;

W/ROLLER CAMChain 163 1976-1986 58 LINKS HEAVY DUTY

499 46 LINKS STANDARD DUTYContinued on Next Page

53


79 5.0 (305) ENG - 1976-93 - 8 Cyl. - 3.74 Bore (CARS ONLY FOR VAN LISTINGS SEE TRUCKS)(Continued)Cam Sprocket S288 1976-1986 44 TEETH HEAVY DUTY

S390 1976-1987 36 TEETH STANDARD DUTY; EXC. ROLLER CAMS732 1987-1993 36 TEETH STANDARD DUTY; W/ROLLER CAM

Crank Sprocket S289 1976-1986 22 TEETH HEAVY DUTYS391 18 TEETH STANDARD DUTY

80 5.0 (307) ENG - 1968-73 - 8 Cyl. - 3 7/8 Bore3pc Set 3-163S INCLUDES [163], [S288] & [S289] HEAVY DUTY




S391 18 TEETH STANDARD DUTY81 5.0-Y (307) ENG - 1986-90 - 8 Cyl. - 3.800 Bore (OLDSMOBILE ENG)


82 5.3-C (325) OHV ENG - 2006-09 - 8 Cyl. - 3.78 Bore (GEN IV LS4 IMPALA, MONTE CARLO)3pc Set 3-3SRH60S 2007-2009 INCLUDES [3SRH60], [S894] & [S827]; FOR USE

W/SINGLE BOLT CAMSHAFT3-3SRH60SA 2006 INCLUDES [3SRH60], [S878] & [S827]; FOR USE W/3 BOLT

CAMSHAFTChain 3SRH60 60 LINKSCam Sprocket S878 2006 44 TEETH; FOR USE W/3BOLT CAMSHAFT

S894 2007-2009 44 TEETH; FOR USE W/SINGLE BOLT CAMCrank Sprocket S827 22 TEETH 22 TEETHChain Tensioner BT5490 2007-2009Damper BD417 2006

83 327 ENG - 1962-69 - 8 Cyl. - 4.000 Bore3pc Set 3-163S INCLUDES [163], [S288] & [S289] HEAVY DUTY

3-489S 1962-1966 INCLUDES [505],[S261] & [S262] STANDARD DUTY3-499S 1967-1969 INCLUDES [499], [S390] & [S391] STANDARD DUTY

Chain 163 58 LINKS HEAVY DUTY499 1967-1969 46 LINKS STANDARD DUTY505 1962-1966 46 LINKS STANDARD DUTY

Cam Sprocket S261 1962-1966 36 TEETH STANDARD DUTYS288 44 TEETH HEAVY DUTYS390 1967-1969 36 TEETH STANDARD DUTY

Crank Sprocket S262 1962-1966 18 TEETH STANDARD DUTYS289 22 TEETH HEAVY DUTYS391 1967-1969 18 TEETH STANDARD DUTY

84 348 ENG - 1958-61 - 8 Cyl. - 4 1/8 Bore (EXC HIGH PERFORMANCE)Chain 494 48 LINKSCam Sprocket S261 36 TEETHCrank Sprocket S262 18 TEETH


3-499S INCLUDES [499], [S390] & [S391] STANDARD DUTYChain 163 58 LINKS HEAVY DUTYContinued on Next Page

54


85 350 ENG - 1967-71 - 8 Cyl. - 4.00 Bore (Continued)Chain 499 46 LINKS STANDARD DUTYCam Sprocket S288 44 TEETH HEAVY DUTY


S391 18 TEETH STANDARD DUTY86 350 ENG - 1972-81 - 8 Cyl. - 4.00 Bore





87 5.7-L,6,7 (350) ENG - 1982-93 - 8 Cyl. - 4.00 Bore (5.7-L 1982 W & W/O POLICE PKG.) (5.7-6 1983-86W & W/O POLICE PKG.,1987-88 POLICE PKG. ONLY) (5.7-7 1989-90 POLICE PKG. ONLY,1991-93 W& W/O POLICE PKG)3pc Set 3-163S 1982-1986 INCLUDES [163], [S288] & [S289] HEAVY DUTY

3-499S 1982-1986 INCLUDES [499], [S390] & [S391] STANDARD DUTY3-506SC 1987-1993 INCLUDES [499], [S732] & [S391] STANDARD DUTY

Chain 163 1982-1986 58 LINKS HEAVY DUTY499 46 LINKS STANDARD DUTY

Cam Sprocket S288 1982-1986 44 TEETH HEAVY DUTYS390 1982-1986 36 TEETH STANDARD DUTYS732 1987-1993 36 TEETH STANDARD DUTY

Crank Sprocket S289 1982-1986 22 TEETH HEAVY DUTYS391 1982-1993 18 TEETH STANDARD DUTY

88 5.7-N (350N) ENG - 1980-85 - 8 Cyl. - 4.00 Bore (OLDSMOBILE DIESEL)Chain 180 48 LINKSCrank Sprocket S503 18 TEETH

89 5.7-8 (350) ENG - 1984-92 - 8 Cyl. - 4.000 Bore (1984-91 CORVETTE & 1987-92 CAMARO)3pc Set 3-163S 1984-1986 INCLUDES [163], [S288] & [S289] HEAVY DUTY



Cam Sprocket S288 1984-1986 44 TEETH HEAVY DUTYS390 1984-1986 36 TEETH STANDARD DUTYS732 1987-1992 36 TEETH STANDARD DUTY


90 5.7-8 (350) ENG - 1982 - 8 Cyl. - 4.06 Bore (CORVETTE)3pc Set 3-163S INCLUDES [163], [S288] & [S289] HEAVY DUTY




S391 18 TEETH STANDARD DUTY

55


91 5.7-G,S (350) ENG - 1997-04 - 8 Cyl. - 3.90 Bore (GEN III LS1, LS6 CAMARO, CORVETTE)3pc Set 3-3SRH60SA INCLUDES [3SRH60], [S878] & [S827]; FOR USE W/3 BOLT

CAMSHAFTChain 3SRH60 60 LINKSCam Sprocket S878 44 TEETH; FOR USE W/3BOLT CAMSHAFTCrank Sprocket S827 22 TEETH 22 TEETHChain Damper AdapterBracket

BD417-BRKT ALLOWS THE USE OF THE LS2 TIMING CHAIN DAMPER[BD417] ON ANY GM LS ENGINE BLOCK NOT ORIGINALLYEQUIPPED FOR CHAIN DAMPERS; DAMPER NOT INCLUDEDEXCLUDES VVT ENGINES

BD417-DBRKT ALLOWS THE USE OF THE LS2 TIMING CHAIN DAMPER[BD417] ON ANY GM LS ENGINE BLOCK NOT ORIGINALLYEQUIPPED FOR CHAIN DAMPERS; INCLUDES [BD417]DAMPER EXCLUDES VVT ENGINES

92 5.7-P (350) ENG - 1992-97 - 8 Cyl. - 4.000 Bore (LT1 CAMARO, CAPRICE, CORVETTE, IMPALA)3pc Set 3-509SA 1995-1997 INCLUDES [499], [S797], [S814]

3-509SB 1992-1994 INCLUDES [499], [S797], [S742]Chain 202 1996 46 LINKS CORVETTE W/M.T.

499 1992-1995 46 LINKS CORVETTE499 1993-1997 46 LINKS CAMARO, CAPRICE, IMPALA499 1996 46 LINKS CORVETTE W/A.T.

Cam Sprocket S742 1992-1993 36 TEETH CORVETTES742 1993-1994 36 TEETH CAMAROS814 1994-1995 36 TEETH CORVETTES814 1994-1996 36 TEETH CAPRICE,IMPALAS814 1995-1997 36 TEETH CAMAROS814 1996 36 TEETH CORVETTE W/A.T.

Crank Sprocket S645 1996 18 TEETH CORVETTE W/M.T.S797 1992-1995 18 TEETH CORVETTES797 1993-1997 18 TEETH CAMARO,CAPRICE,IMPALAS797 1996 18 TEETH CORVETTE W/A.T.

93 6.0-U (364) OHV ENG - 2005-07 - 8 Cyl. - 4.00 Bore (GEN IV LS2 CORVETTE)3pc Set 3-3SRH60S 2007 INCLUDES [3SRH60], [S894] & [S827]; FOR USE W/SINGLE

BOLT CAMSHAFT3-3SRH60SA 2005 INCLUDES [3SRH60], [S878] & [S827]; FOR USE W/3 BOLT

CAMSHAFTChain 3SRH60 2005 60 LINKS FOR USE W/3 BOLT CAM W/1 SENSOR

3SRH60 2006 60 LINKS FOR USE W/3 BOLT CAM W/4 SENSORS3SRH60 2007 60 LINKS FOR USE W/SINGLE BOLT CAM W/4 SENSORS

Cam Sprocket S878 2005 44 TEETH; FOR USE W/3BOLT CAMSHAFTS894 2007 44 TEETH; FOR USE W/SINGLE BOLT CAM

Crank Sprocket S827 2005 22 TEETH 22 TEETH FOR USE W/3 BOLT CAM W/1SENSOR

S827 2006 22 TEETH 22 TEETH FOR USE W/3 BOLT CAM W/4SENSORS

S827 2007 22 TEETH 22 TEETH FOR USE W/SINGLE BOLT CAM W/4SENSORS

Damper BD417 2005 FOR USE W/3 BOLT CAMSHAFT; 1 SENSORBD417 2006 FOR USE W/3 BOLT CAMSHAFT; 4 SENSORSBD417 2007 FOR USE W/SINGLE BOLT CAMSHAFT; 4 SENSORS

Chain Damper AdapterBracket



56


93 6.0-U (364) OHV ENG - 2005-07 - 8 Cyl. - 4.00 Bore (GEN IV LS2 CORVETTE) (Continued)Chain Damper AdapterBracket


94 6.2-W (376) OHV ENG - 2008-14 - 8 Cyl. - 4.06 Bore (GEN IV LS3 CORVETTE, CAMARO & SS) NONSUPERCHARGED3pc Set 3-3SRH60S INCLUDES [3SRH60], [S894] & [S827]; FOR USE W/SINGLE

BOLT CAMSHAFTChain 3SRH60 60 LINKS USE W/SINGLE BOLT CAM W/4 SENSORSCam Sprocket S894 44 TEETH; FOR USE W/SINGLE BOLT CAMCrank Sprocket S827 22 TEETH 22 TEETH USE W/SINGLE BOLT CAM W/4 SENSORSDamper BD417 2008-2013


3-501S INCLUDES [501], [S392] & [S393] STANDARD DUTY; EXC. HIPERF.

Chain 168 66 LINKS HEAVY DUTY495 50 LINKS STANDARD DUTY; W/HI PERF.501 50 LINKS STANDARD DUTY; EXC. HI PERF.

Cam Sprocket S392 38 TEETH STANDARD DUTY; EXC. HI PERF.S394 50 TEETH HEAVY DUTY

Crank Sprocket S393 19 TEETH STANDARD DUTY; EXC. HI PERF.S395 25 TEETH HEAVY DUTY

96 400 ENG - 1970-76 - 8 Cyl. - 4 1/8 Bore (SMALL BLOCK)3pc Set 3-163S INCLUDES [163], [S288] & [S289] HEAVY DUTY




S391 18 TEETH STANDARD DUTY97 402 (400) ENG - 1970-72 - 8 Cyl. - 4 1/8 Bore (BIG BLOCK)



Cam Sprocket S392 38 TEETH STANDARD DUTYS394 50 TEETH HEAVY DUTY

Crank Sprocket S393 19 TEETH STANDARD DUTYS395 25 TEETH HEAVY DUTY

98 409 ENG - 1958-65 - 8 Cyl. - 4.31 BoreChain 162 1962-1965 64 LINKS STANDARD DUTY

494 48 LINKS W/HIGH PERFORMANCE ENG.Cam Sprocket S261 36 TEETH W/HIGH PERFORMANCE ENG.Crank Sprocket S262 18 TEETH W/HIGH PERFORMANCE ENG.



501 50 LINKS STANDARD DUTYCam Sprocket S392 38 TEETH STANDARD DUTYContinued on Next Page

57


99 427 ENG - 1966-69 - 8 Cyl. - 4.251 Bore (Continued)Cam Sprocket S394 50 TEETH HEAVY DUTYCrank Sprocket S393 19 TEETH STANDARD DUTY

S395 25 TEETH HEAVY DUTY100 7.0-E (427) OHV ENG - 2006-13 - 8 Cyl. - 4.13 Bore (GEN IV LS7 CORVETTE Z06,427)

Chain 3SRH60 2006-2010 60 LINKS101 454 ENG - 1970-76 - 8 Cyl. - 4.251 Bore





CHRYLSER-INDUSTRIALEngine Year Line Engine Year Line Engine Year Line

8 Cyl.18A,19A,24A,52 & 56 16 Cyl.30 232 35,5A,6,6A,7,7A,8,8A 4

8 Cyl.56A 5H318 6HT318 7H361 8H383 9

8 Cyl. (Continued)

H400 10H413 11


1 18A,19A,24A,52 & 56 ENG - 8 Cyl.Chain 348 68 LINKSCrank Sprocket S274 23 TEETH

2 30 ENG - 6 Cyl. - 3 1/4 BoreCam Sprocket S265 38 TEETH AFTER SER. #7259Crank Sprocket S127 19 TEETH BEFORE SER. #7259

S266 19 TEETH AFTER SER. #72593 32 ENG - 6 Cyl. - 3 7/16 Bore

Cam Sprocket S265 38 TEETH AFTER SER. #7259Crank Sprocket S127 19 TEETH BEFORE SER. #7259

S266 19 TEETH AFTER SER. #72594 5,5A,6,6A,7,7A,8,8A ENG - 6 Cyl. - 3 1/4 Bore

Crank Sprocket S127 19 TEETH5 56A ENG - 8 Cyl. - 3 15/16 Bore

Chain 348 68 LINKSCam Sprocket S273 46 TEETHCrank Sprocket S274 23 TEETH

6 H318 ENG - 8 Cyl. - 3.91 BoreChain 348 68 LINKSCrank Sprocket S274 23 TEETH

7 HT318 ENG - 8 Cyl. - 3.91 BoreChain 160 68 LINKSCrank Sprocket S297 23 TEETH

8 H361 ENG - 8 Cyl. - 4 1/8 BoreChain 495 50 LINKSCrank Sprocket S291 19 TEETH

58

CHRYLSER-INDUSTRIAL (Continued)LineNo. Part Title Part No Description


10 H400 ENG - 8 Cyl. - 4.342 Bore3pc Set 3-501SA INCLUDES [501], [S366] & [S367]Chain 501 50 LINKSCam Sprocket S366 38 TEETH


CHRYSLEREngine Year Line Engine Year Line Engine Year Line

4 Cyl.2.0-C (122) SOHC 2000-02 12.0-Y (122) DOHC 1995-99 22.2 (135) SOHC 1982-89 32.2-R (135) DOHC 1989-90 42.2-C (135) SOHC 1990 52.4 (148) DOHC 1995-10 62.4-G (2351CC) SOHC 2001-05 72.5-J,K,V (153) OHC 1986-94 86 Cyl.2.5-H,N (152) 1995-00 94 Cyl.2.6-D,G,H,N (156) SOHC 1982-89 10

6 Cyl.2.7-R,T,U,D (167) DOHC 1998-09 113.0-H (181) SOHC 2001-05 123.0-3 (181) SOHC 1988-95 133.2-J (197) SOHC 1998-01 143.3 (201) OHV 1990-10 153.5-F (215) SOHC 1993-10 16225 1978-83 173.8-L,P (230) OHV 1991-10 184.1 (251) 1942-52 198 Cyl.4.7-N,P (285) SOHC 2007-09 20301 1955 215.2 (318) 1975-89 22

8 Cyl. (Continued)

331 1954-56 235.7-2,H,T(345) OHV 2005-14 24354 1956-58 255.9 (360) 1974-80 265.9 (360) 1971-72 27361 1961-64 286.1-W (370) 2005-10 29383 1959-71 30392 1957-58 31400 1972-78 32413 1959-65 33426 WEDGE 1963 34440 1966-78 35


1 2.0-C (122) SOHC ENG - 2000-02 - 4 Cyl. - 3.45 Bore (2000 CIRRUS) (00-02 NEON)Belt B-0245 2000 112 TEETH CIRRUS

2 2.0-Y (122) DOHC ENG - 1995-99 - 4 Cyl. - 3.44 Bore (NON-TURBO) SEBRINGBelt B-0246 150 TEETH

3 2.2 (135) SOHC ENG - 1982-89 - 4 Cyl. - 3.444 BoreBelt B-0153 1989 124 TEETH CAMSHAFT

B-071 1982-1988 124 TEETHCam Sprocket S458 38 TEETH

S616 1982-1988 40 TEETHCrank Sprocket S417 1982-1987 20 TEETHBelt Tensioner BT192 1989

BT91 1982-19884 2.2-R (135) DOHC ENG - 1989-90 - 4 Cyl. - 3.444 Bore TC MASERATI

Chain 201 60 LINKS BALANCE SHAFTBelt B-0206 131 TEETHCrank Sprocket S640 36 TEETH CHAINBalance Shaft Sprocket S642 18 TEETH CHAINChain Tensioner BT298 BAL. SHAFT

5 2.2-C (135) SOHC - 1990 - 4 Cyl. - 3.44 BoreChain 201 60 LINKS BALANCE SHAFTBelt B-0153 124 TEETHCrank Sprocket S640 36 TEETH OUTERBalance Shaft Sprocket S642 18 TEETH LOWERBelt Tensioner BT192

59

CHRYSLER (Continued)LineNo. Part Title Part No Description

6 2.4 (148) DOHC ENG - 1995-10 - 4 Cyl. - 3.44 Bore (CIRRUS, PT CRUISER, SEBRING, VOYAGER)INCLUDES VANSChain 201 1995-2006 60 LINKS BALANCE SHAFT CHAIN; EXCLUDES

TURBOCHARGED ENGINESBelt B-0265 1995-2006 146 TEETH TIMING BELTBalance Shaft Sprocket S642 1995-2006 18 TEETH LOWERChain Tensioner BT298 1995-2006 BALANCE SHAFT CHAIN TENSIONERChain Guide BG297 1995-2006 BALANCE SHAFT CHAIN GUIDE

7 2.4-G (2351CC) SOHC ENG - 2001-05 - 4 Cyl. - 3.41 Bore SEBRING BASE, LX; W/OTURBOCHARGED ENGBelt B-0168 65 TEETH BALANCE SHAFT BELT

B-0232 123 TEETH TIMING BELT8 2.5-J,K,V (153) OHC ENG - 1986-94 - 4 Cyl. - 3.44 Bore (GAS & FLEX FUEL) INCLUDES

TURBOCHARGEDTiming Kit B-0114-1 1986-1987 KIT INCLUDES [B-0114], (2) [S714] & [S709]

CAMSHAFTChain 201 60 LINKS BALANCE SHAFTBelt B-0114 1986-1987 126 TEETH CAMSHAFT

B-0132 1988 126 TEETH CAMSHAFTB-0153 1989-1993 124 TEETH CAMSHAFT

Cam Sprocket S714 1986-1987 40 TEETHCrank Sprocket S640 36 TEETH BALANCE SHAFT CHAIN

S709 1986-1987 20 TEETH CAMSHAFT BELTBalance Shaft Sprocket S642 18 TEETHBelt Tensioner BT192 1989-1993 CAMSHAFT

BT94 1986-1988 CAMSHAFTChain Tensioner BT298 BALANCE SHAFTChain Guide BG297 BALANCE SHAFT

9 2.5-H,N (152) ENG - 1995-00 - V6 - 3.29 Bore (SEBRING,CIRRUS) (24 VALVE SOHC MITSUBISHIENG)Belt B-0259 187 TEETHCam Sprocket S866 50 TEETHBelt Tensioner BT271 RIGHT HAND; TENSIONER PULLEY

BT5120 RIGHT HAND; TENSIONER ARMBT5121 RIGHT HAND UPPER; HYDRAULIC TENSIONER

Idler BT227 LEFT HAND10 2.6-D,G,H,N (156) SOHC ENG - 1982-89 - 4 Cyl. - 91.1 MM Bore (W/BALANCE SHAFT) (G54B

MITSUBISHI ENG) (ENG WAS NOT PRODUCED IN 1986)Timing Kit 3-102S KIT INCLUDES [3DR102-2] CAMSHAFT KIT & [8MMSR90-1]

BALANCE SHAFT KIT3DR102-2 KIT INCLUDES [3DR102], [S458], [S455], [BD31], [BD30] & [BT49]

(CAMSHAFT KIT)8MMSR90-1 KIT INCLUDES [8MMSR90], [S407], [S567] (2), [BG48], [BG64] &

[BG51] (BALANCE SHAFT KIT)Balance Shaft Elim. Kit BSEK122 1982-1985 KIT INCLUDES CHAIN, OIL PUMP SHAFT PLUG, OIL

GALLEY PLUG, OIL PUMP MOUNTING GASKET ANDINSTRUCTION SHEET FWD ONLY

Chain 3DR102 102 LINKS CAMSHAFT8MMSR90 90 LINKS BAL. SHAFT

Crank Sprocket S407 34 TEETH OUTERS455 19 TEETH INNER

Balance Shaft Sprocket S567 17 TEETH (2) REQ.Continued on Next Page

60


10 2.6-D,G,H,N (156) SOHC ENG - 1982-89 - 4 Cyl. - 91.1 MM Bore (W/BALANCE SHAFT) (G54BMITSUBISHI ENG) (ENG WAS NOT PRODUCED IN 1986) (Continued)Chain Tensioner BT49 TIMING CHAINChain Guide BD30 DAMPER; TENSION SIDE

BD31 DAMPER; SLACK SIDEBG48 BAL. SHAFT LOWER LEFTBG51 BAL. SHAFT LOWER RIGHTBG64 BAL. SHAFT UPPER

11 2.7-R,T,U,D (167) DOHC ENG - 1998-09 - V6 - 3.39 Bore (CONCORDE,INTREPID,SEBRING,300)INCLUDES FLEX FUELTiming Kit 3-397S 2000-2002 KIT INCLUDES [397], (2) [193], [S839], [S840], [S860],

[BT426A], (2) [BT427], [BT507], [BG423A], [BG424], [BG425](W/SBEC TARGET WHEEL) 2000-01 CONCORDE LH, 2001-02SEBRING JR

3-397SA 1998-1999 KIT INCLUDES [397], (2) [193], [S839], [S840], [S860],[BT426A], (2) [BT427], [BT506], [BG423A], [BG424], [BG425](W/SBEC TARGET WHEEL) CONCORDE

3-397SB 2002-2007 KIT INCLUDES [397], (2) [193], [S839], [S840], [S862],[BT426A], (2) [BT427], [BT507], [BG423A], [BG424], [BG425] (W/NGC TARGET WHEEL) 2002-07 CONCORDE LH, INTREPID LH,300. 2003-07 SEBRING JR

3-397SBX 1998-1999 KIT INCLUDES [397], (2) [193], [BT426A], (2) [BT427],[BT506], [BG423A], [BG424], [BG425] DOES NOT INCLUDESPROCKETS

3-397SX 2000-2007 KIT INCLUDES [397], (2) [193], [BT426A], (2) [BT427],[BT507], [BG423A], [BG424], [BG425] DOES NOT INCLUDESPROCKETS

Chain 193 44 LINKS SECONDARY (2) REQ.; EXCLUDES 2008-09 SEBRING397 180 LINKS PRIMARY; EXCLUDES 2008-09 SEBRING

Cam Sprocket S840 42 TEETH RIGHT HAND; EXCLUDES 2008-09 SEBRINGS860 1998-2001 42 TEETH LEFT HAND; W/SBEC TARGET WHEEL;

CONCORD LH, INTREPID LHS860 2001-2002 42 TEETH LEFT HAND; W/SBEC TARGET WHEEL;

SEBRINGS862 42 TEETH LEFT HAND; W/NGC TARGET WHEEL; EXCLUDES

2008-09 SEBRINGCrank Sprocket S839 21 TEETH EXCLUDES 2008-09 SEBRINGChain Tensioner BT426 OLD DESIGN W/PLASTIC CONSTRUCTION RIGHT LOWER;

TENSIONER ARM; EXCLUDES 2008-09 SEBRINGBT426A NEW DESIGN W/ALUMINUM CONSTRUCTION RIGHT LOWER;

TENSIONER ARM; EXCLUDES 2008-09 SEBRINGBT427 UPPER SECONDARY TENSIONER; (2) REQUIRED; EXCLUDES

2008-09 SEBRINGBT506 1998-1999 PRIMARY TENSIONERBT507 2000-2009 RIGHT PRIMARY HYDRAULIC TENSIONER;

EXCLUDES 2008-09 SEBRINGMSB-02 INCLUDES: 2 MOUNTING BOLTS AND STOP BLOCK

ASSEMBLY TENSIONER ARM STOP BLOCK; PREVENTS CHAINBACKLASH; NOTE: USE WHEN REPLACING NEW TIMINGCHAIN AND TENSIONER. DO NOT USE WITH OLDCOMPONENTS

Chain Guide BG423 OLD DESIGN W/PLASTIC CONSTRUCTION LEFT LOWER;EXCLUDES 2008-09 SEBRING


61


11 2.7-R,T,U,D (167) DOHC ENG - 1998-09 - V6 - 3.39 Bore (CONCORDE,INTREPID,SEBRING,300)INCLUDES FLEX FUEL (Continued)Chain Guide BG423A NEW DESIGN W/ALUMINUM CONSTRUCTION LEFT LOWER;

EXCLUDES 2008-09 SEBRINGBG424 LEFT INNER; EXCLUDES 2008-09 SEBRINGBG425 RIGHT INNER; EXCLUDES 2008-09 SEBRING

12 3.0-H (181) SOHC ENG - 2001-05 - V6 - 3.59 Bore (SEBRING) (6G72 MITSUBISHI ENG SOHC)Belt B-0259 187 TEETHCam Sprocket S866 50 TEETHBelt Tensioner BT271 RIGHT HAND TENSIONER PULLEY

BT5120 RIGHT HAND TENSIONER ARMBT5121 RIGHT HAND UPPER; HYDRAULIC TENSIONER

Idler BT227 LEFT HAND13 3.0-3 (181) SOHC ENG - 1988-95 - V6 - 3.587 Bore (6G72 MITSUBISHI ENG)


14 3.2-J (197) SOHC ENG - 1998-01 - V6 - 3.62 Bore (CONCORDE)Belt B-0295 201 TEETHBelt Tensioner BT357 PULLEY ONLY. DOES NOT INCLUDE BRACKET AND

HYDRAULIC TENSIONER15 3.3 (201) OHV ENG - 1990-2010 - V6 - 3.66 Bore (INCLUDES MINIVANS) GAS AND FLEX FUEL

ENGINESCam Thrust Plate MD100 .297 PLATE THICKNESS FOR USE W/S788 & S934 CAM

SPROCKETS3pc Set 3-3235S 2006-2010 INCLUDES [300], [S934], [S927] & [MD100]

3-388S 1990-2004 INCLUDES [388], [S788] & [S715] KIT CONTAINSSOFTBACK CHAIN; BOLT ON SNUBBER REQUIRED; NOTPROVIDED

Chain 300 2006-2010 64 LINKS388 1990-2005 64 LINKS SOFTBACK CHAIN, REQUIRES BOLT ON

SNUBBER; NOT PROVIDEDCam Sprocket S788 1990-2004 40 TEETH USE NEW THRUST PLATE SUPPLIED

W/THIS SPROCKETS934 2006-2010 40 TEETH USE NEW THRUST PLATE SUPPLIED

W/THIS SPROCKETCrank Sprocket S715 1990-2005 20 TEETH

S927 2006-2010 20 TEETH16 3.5 (215) SOHC ENG - 1993-10 - V6 - 3.78 Bore (300,300M,CONCORDE,INTREPID,LHS,NEW

YORKER,PROWLER,SEBRING)Belt B-0219 1993-1994 200 TEETH

B-0255 1995-1998 202 TEETHB-0295 1999-2010 201 TEETH

Belt Tensioner BT357 PULLEY ONLY; DOES NOT INCLUDE BRACKET ANDHYDRAULIC TENSIONER

17 3.7 (225) ENG - 1978-83 - 6 Cyl. - 3.400 Bore3pc Set 3-495S INCLUDES [495], [S314] & [S291]Chain 495 50 LINKSCrank Sprocket S291 19 TEETH

18 3.8-L,P,1 (230) OHV ENG - 1991-2010 - V6 - 3.78 Bore (INCLUDES MINIVANS, PACIFICA)Cam Thrust Plate MD100 .297 PLATE THICKNESS FOR USE W/S788 & S934 CAM

SPROCKETSContinued on Next Page

62


18 3.8-L,P,1 (230) OHV ENG - 1991-2010 - V6 - 3.78 Bore (INCLUDES MINIVANS, PACIFICA)(Continued)3pc Set 3-3235S 2006-2010 INCLUDES [300], [S934], [S927] & [MD100] EXC. 2006-

08 PACIFICA3-388S 1991-2004 INCLUDES [388], [S788] & [S715] KIT CONTAINS

SOFTBACK CHAIN, REQUIRES BOLT ON SNUBBER; NOTPROVIDED


SNUBBER; NOT PROVIDED; EXCLUDES PACIFICACam Sprocket S788 1991-2004 40 TEETH USE NEW THRUST PLATE SUPPLIED


W/THIS SPROCKET EXC. 2006-08 PACIFICACrank Sprocket S715 1991-2005 20 TEETH EXC. 2005 PACIFICA

S927 2006-2010 20 TEETH EXC. 2006-08 PACIFICA19 4.1 (251) ENG - 1942-52 - 6 Cyl. - 3.44 Bore (L-HEAD)

Crank Sprocket S127 1942 19 TEETHS127 1946-1952 19 TEETH

20 4.7-N,P (285) SOHC ENG - 2007-09 - 8 Cyl. - 3.66 Bore (ASPEN) MAGNUM GAS-FLEX FUELChain 393 70 LINKS PRIMARYCrank Sprocket S861 25 TEETHIdler Sprocket S863 2009 50 TEETH PRIMARYChain Tensioner BT419 HYD SECONDARY TENSIONER; RIGHT HAND

BT420 HYD SECONDARY TENSIONER; LEFT HANDDamper BD421 (2) REQ.Chain Guide BG422 (2) REQ.

21 4.9 (301) ENG - 1955 - 8 Cyl. - 3 5/8 BoreChain 348 68 LINKSCrank Sprocket S274 23 TEETH

22 5.2 (318) ENG - 1975-89 - 8 Cyl. - 3.91 Bore3pc Set 3-160S INCLUDES [160], [S402] & [S297] W/HEAVY DUTY ROLLER

CHAIN3-361S INCLUDES [361], [S358] & [S359] W/STANDARD DUTY CHAIN

Chain 160 68 LINKS HEAVY DUTY ROLLER CHAIN361 68 LINKS STANDARD DUTY CHAIN

Cam Sprocket S358 46 TEETH USE W/[361] STANDARD DUTY CHAINS402 46 TEETH USE W/[160] HEAVY DUTY ROLLER CHAIN

Crank Sprocket S297 23 TEETH USE W/[160] HEAVY DUTY ROLLER CHAINS359 23 TEETH USE W/[361] STANDARD DUTY CHAIN

23 5.4 (331) ENG - 1954-56 - 8 Cyl. - 3 13/16 BoreChain 348 68 LINKSCam Sprocket S273 1956 46 TEETHCrank Sprocket S274 23 TEETH

24 5.7-2,H,T (345) OHV ENG - 2005-14 - 8 Cyl. - 3.92 Bore (2005-14 300) (2007-09 ASPEN TRUCK) HEMITiming Kit 3-704S 2005-2008 KIT INCLUDES (1) 704, (1) S896, (1) S889, (1) BT5489Chain 704 2005-2008 86 LINKSCam Sprocket S896 2005-2008 52 TEETHCrank Sprocket S889 2005-2008 26 TEETHChain Tensioner BT5489 2005-2008

25 5.8 (354) ENG - 1956-58 - 8 Cyl. - 3 15/16 BoreChain 348 68 LINKSCam Sprocket S273 46 TEETHContinued on Next Page

63


25 5.8 (354) ENG - 1956-58 - 8 Cyl. - 3 15/16 Bore (Continued)Crank Sprocket S274 23 TEETH

26 5.9 (360) ENG - 1974-80 - 8 Cyl. - 4.00 Bore (CORDOBA 1975-80, LEBARON 1978-79, NEWYORKER 1977-80, NEWPORT 1974-80, TOWN & COUNTRY 1978-80)3pc Set 3-160S INCLUDES [160], [S402] & [S297] HEAVY DUTY


361 68 LINKS STANDARD DUTYCam Sprocket S358 46 TEETH USE W/[361] STANDARD DUTY CHAIN

S402 46 TEETH USE W/[160] HEAVY DUTY CHAINCrank Sprocket S297 23 TEETH USE W/[160] HEAVY DUTY CHAIN

S359 23 TEETH USE W/[361] STANDARD DUTY CHAIN27 5.9 (360) ENG - 1971-72 - 8 Cyl. - 4.000 Bore (NEWPORT) (ENG NOT USED IN 1973)



Cam Sprocket S358 46 TEETH USE W/[361] STANDARD DUTY CHAINS402 46 TEETH USE W/[160] HEAVY DUTY CHAIN

Crank Sprocket S297 23 TEETH USE W/[160] HEAVY DUTY CHAINS359 23 TEETH USE W/[361] STANDARD DUTY CHAIN

28 5.9 (361) ENG - 1961-64 - 8 Cyl. - 4 1/8 Bore3pc Set 3-168SA INCLUDES [168], [S380] & [S339] H.D.Chain 168 66 LINKS H.D.

495 50 LINKSCam Sprocket S380 50 TEETH H.D.Crank Sprocket S291 19 TEETH

S339 25 TEETH H.D.29 6.1-W (370) OHV ENG - 2005-10 - 8 Cyl. - 4.06 Bore (300 CSRT8) HEMI

Timing Kit 3-704S 2005-2008 KIT INCLUDES (1) 704, (1) S896, (1) S889, (1) BT5489Chain 704 2005-2008 86 LINKSCam Sprocket S896 2005-2008 52 TEETHCrank Sprocket S889 2005-2008 26 TEETHChain Tensioner BT5489 2005-2008

30 6.3 (383) ENG - 1959-71 - 8 Cyl. - 4 1/4 Bore3pc Set 3-168SA 1959-1971 INCLUDES [168], [S380] & [S339] HEAVY DUTY

3-501SA 1966-1971 INCLUDES [501], [S366] & [S367] STANDARD DUTYChain 168 1959-1971 66 LINKS HEAVY DUTY

495 1959-1965 50 LINKS STANDARD DUTY501 1966-1971 50 LINKS STANDARD DUTY

Cam Sprocket S366 1966-1971 38 TEETH STANDARD DUTYS380 1959-1971 50 TEETH HEAVY DUTY

Crank Sprocket S291 1959-1965 19 TEETH STANDARD DUTYS339 1959-1971 25 TEETH HEAVY DUTYS367 1966-1971 19 TEETH STANDARD DUTY

31 6.4 (392) ENG - 1957-58 - 8 Cyl. - 4.000 BoreChain 348 68 LINKSCam Sprocket S273 46 TEETHCrank Sprocket S274 23 TEETH

32 6.6 (400) ENG - 1972-78 - 8 Cyl. - 4.34 Bore3pc Set 3-168SA INCLUDES [168], [S380] & [S339] HEAVY DUTY

3-501SA INCLUDES [501], [S366] & [S367] STANDARD DUTYChain 168 66 LINKS HEAVY DUTYContinued on Next Page

64


32 6.6 (400) ENG - 1972-78 - 8 Cyl. - 4.34 Bore (Continued)Chain 501 50 LINKS STANDARD DUTYCam Sprocket S366 38 TEETH STANDARD DUTY

S380 50 TEETH HEAVY DUTYCrank Sprocket S339 25 TEETH HEAVY DUTY

S367 19 TEETH STANDARD DUTY33 6.7 (413) ENG - 1959-65 - 8 Cyl. - 4.19 Bore

Chain 495 50 LINKSCrank Sprocket S291 19 TEETH

34 7.0 (426) WEDGE ENG - 1963 - 8 Cyl. - 4 1/4 Bore3pc Set 3-168SA INCLUDES [168], [S380] & [S339] H.D.Chain 168 66 LINKS H.D.


S339 25 TEETH H.D.35 7.2 (440) ENG - 1966-78 - 8 Cyl. - 4.320 Bore

3pc Set 3-168S INCLUDES [168], [S340] & [S339] HEAVY DUTY; FOR USE W/3BOLT CAM

3-168SA INCLUDES [168], [S380] & [S339] HEAVY DUTY; FOR USEW/SINGLE BOLT CAM

3-501SA INCLUDES [501], [S366] & [S367] STANDARD DUTYChain 168 66 LINKS HEAVY DUTY

501 50 LINKS STANDARD DUTYCam Sprocket S340 50 TEETH HEAVY DUTY; FOR USE W/3 BOLT CAM

S366 38 TEETH STANDARD DUTYS380 50 TEETH HEAVY DUTY; FOR USE W/SINGLE BOLT CAM


CONTINENTALEngine Year Line Engine Year Line Engine Year Line

4 Cyl.4CYL-Y112 14CYL-Z120 24CYL-Z129 24CYL-Z134 2

4 Cyl. (Continued)

4CYL-F124 24CYL-F4124,F4140 34CYL-Y69 4

6 Cyl.6CYL-24B 56CYL-F6209,F6226 6


1 4CYL-Y112 ENG - 4 Cyl. - 3 3/16 BoreCam Gear 2620 56 TEETH OEM #Y400H299

2 4CYL-F124 ENG - 4 Cyl. F135,F140,F162,F163Cam Gear 2660 56 TEETH OEM #F400H406Crank Gear 2603 24 TEETH OEM #D600H300Fan Drive Gear 2675 20 TEETH OEM #F209H303

3 4CYL-F4124,F4140 ENG - 4 Cyl. (& F4162 & F4162A ENGS)Crank Gear 2603 24 TEETH OEM #D600H300

4 4CYL-Y69 ENG - 4 Cyl. - 2 3/4 BoreGov. Cam Gear 2609 38 TEETH OEM #Y400H312

5 6CYL-24B ENG - 6 Cyl. (F186,F209,F226,F227,F245 ENGS)Cam Gear 2620 56 TEETH OEM #F400403 PLAIN

2652A 56 TEETH F227 & F245 (ENG. SPEC. 8128-8124) OEM F400H4182660 56 TEETH OEM #F400H406


65

CONTINENTAL (Continued)LineNo. Part Title Part No Description

5 6CYL-24B ENG - 6 Cyl. (F186,F209,F226,F227,F245 ENGS) (Continued)Crank Gear 2603 24 TEETH OEM #D600H300

2661 28 TEETH OEM #F226H202Fan Drive Gear 2675 20 TEETH OEM #F209H303

6 6CYL-F6209,F6226 ENG - 6 Cyl.Chain 505 46 LINKS 3/4" WIDE OEM F600H316Cam Gear 2652 56 TEETH OEM #F209H203

2652A 56 TEETH OEM #F400H4042660 56 TEETH OEM #F400H406

Crank Gear 2603 24 TEETH OEM #D600H3002661 28 TEETH OEM #F226H202

DAEWOOEngine Year Line Engine Year Line Engine Year Line

4 Cyl.1588CC DOHC 1999-02 1

4 Cyl. (Continued)

1998CC (Z) DOHC 1999-02 24 Cyl. (Continued)

2200CC DOHC 1999-02 3LineNo. Part Title Part No Description

1 1588CC DOHC ENG - 1999-02 - 4 Cyl. - 79 MM Bore (LANOS) (ECOTEC)Belt B-0310 127 TEETH INTERFERENCE ENG APPLICATION

2 1998CC (Z) DOHC ENG - 1999-02 - 4 Cyl. - 86.0 MM Bore (NUBIRA) ECOTEC W/OPEL ENGBelt B-0309 169 TEETH INTERFERENCE ENGINE APPLICATION

3 2200CC DOHC ENG - 1999-02 - 4 Cyl. - 86 MM Bore (LEGANZA)ECOTEC ENG. OPELBelt B-0305 171 TEETH

DAIHATSUEngine Year Line Engine Year Line Engine Year Line

3 Cyl.1.0 (993CC) OHC 1988-92 1

4 Cyl.1.3 (1295CC) OHC 1989-92 21.6 (1589CC) OHC 1990-92 3


1 1.0 (993CC) OHC ENG - 1988-92 - 3 Cyl. - 76 MM Bore (CHARADE)Belt B-0178 1988-1992 91 TEETHOil Pump Sprocket S696 1988-1992 22 TEETH DRIVEN

S697 1988-1992 30 TEETH DRIVER2 1.3 (1295CC) OHC ENG - 1989-92 - 4 Cyl. - 76 MM Bore (CHARADE 16V ENG)

Belt B-0181 1989-1992 93 TEETH3 1.6 (1589CC) OHC ENG - 1990-92 - 4 Cyl. - 77 MM Bore (ROCKY 16V ENG)

Belt B-0182 1990-1992 95 TEETH

DESOTOEngine Year Line Engine Year Line Engine Year Line

6 Cyl.251 1934-54 18 Cyl.276 OHV 1952-54 2

8 Cyl. (Continued)

325 1957 3350 1958 4361 ENG 1958-61 5

8 Cyl. (Continued)

383 1959-60 6


1 251 ENG - 1934-54 - 6 Cyl. - 3.44 Bore (S-15, POWERMASTER)Crank Sprocket S127 19 TEETH

2 276 OHV ENG - 1952-55 - 8 Cyl. - 3 5/8 Bore FIREDOMEChain 348 68 LINKSCrank Sprocket S274 23 TEETH

66

DESOTO (Continued)LineNo. Part Title Part No Description

3 325 ENG - 1957 - 8 Cyl. - 3.69 Bore FIRESWEEPChain 348 68 LINKSCam Sprocket S273 46 TEETHCrank Sprocket S274 23 TEETH

4 350 ENG - 1958 - 8 Cyl. - 4 1/16 BoreChain 495 50 LINKSCrank Sprocket S291 19 TEETH

5 361 ENG - 1958-61 - 8 Cyl. - 4.13 Bore3pc Set 3-168SA INCLUDES [168], [S380] & [S339] HEAVY DUTYChain 168 66 LINKS HEAVY DUTY

495 50 LINKS STANDARD DUTYCam Sprocket S380 50 TEETH HEAVY DUTYCrank Sprocket S291 19 TEETH STANDARD DUTY

S339 25 TEETH USED WITH BOTH STANDARD DUTY AND HEAVYDUTY CHAINS AND CAM SPROCKETS


DETROIT DIESELEngine Year Line Engine Year Line Engine Year Line

4 Cyl.4-53 16 Cyl.6-53 1

6 Cyl. (Continued)

6-71N 16V-53 26V-71 2

8 Cyl.8V-71 38V-92 4


1 6-71N ENG - 6 Cyl. - 4 1/4 BoreCrank Gear 2881 78 TEETH

2 6V-71 ENG - 6 Cyl. - 4 1/4 BoreCrank Gear 2883 78 TEETH

3 8V-71 ENG - 8 Cyl. - 4 1/4 BoreCrank Gear 2883 78 TEETH

4 8V-92 ENG - 8 Cyl. - 4.84 BoreCrank Gear 2883 78 TEETH OEM #5117102

67

DODGEEngine Year Line Engine Year Line Engine Year Line

4 Cyl.1.4 (86) 1979-84 11.5-A (Q1500) 1991-94 21.5-K,X (Q1500) 1985-90 31.6-Y & Z DOHC 1989-90 41.6 (K1600) OHC 1971-77 51.6 (K1600) OHC 1978-82 61.6 (K1600) SOHC 1983-88 71.6 (Z1600) OHC 1977-80 81.7 (105) OHC 1978-83 91.8-T (107) SOHC 1989-90 101.8-C (112) SOHC 1993-94 112.0 (U2000) SOHC 1974-75 122.0 (A2000) SOHC 1984-91 132.0 (U2000) OHC 1976-77 142.0-Y (122) DOHC 1995-99 152.0-C,F (122) SOHC 1995-05 162.2 (135) SOHC 1981-94 172.2-A (135) DOHC 1992-93 182.4-B,J,S,X (148) DOHC 1995-07 192.4-G (2351) SOHC 2001-05 202.5-J,K,V (153) OHC 1986-95 21

6 Cyl.2.5-H,N (152) 1995-00 224 Cyl.2.6 (2600) SOHC 1978-87 236 Cyl.2.7 (167) DOHC 1998-10 24170 1960-69 253.0 (181) DOHC 1991-96 263.0-3,H (181) SOHC 1987-00 273.0-H (181) SOHC 2001-05 283.0-U (182) SOHC 1990-92 293.2-J (197) SOHC 1998-01 30198 1970-74 313.3 (201) OHV 1990-10 323.5-G,M,V (215) SOHC 2000-10 333.5-F (215) SOHC 1993-97 343.7 (225) OHV 1960-83 353.8-L,P,1 (230, 231) OHV 1994-10 363.8 (230) 1942-59 378 Cyl.3.9 (239) 1953-54 38241 1953-54 39

8 Cyl. (Continued)

270 1955-56 40273 1965-69 41315 1956 425.2 (318) 1960-89 43325 1957-58 445.3 (326) 1959 455.6 (340) 1968-73 465.7-H,2,T (345) OHV 2005-14 475.7 (350) 1958 485.9 (360) 1971-80 49361 OHV 1958-66 506.1-3,W (370) OHV 2006-10 516.3 (383) 1959-71 52400 1972-78 53413 1959-65 54426 WEDGE 1963-65 557.0 (426) HEMI 1966-71 567.2 (440) 1966-78 57

8.0-E (488) OHV 1992-02 58


1 1.4 (86) ENG - 1979-84 - 4 Cyl. - 74 MM Bore (COLT HATCHBACK VIN CODE J,2,A)Belt B-073 92 TEETHBelt Tensioner BD33

2 1.5-A (Q1500) ENG - 1991-94 - 4 Cyl. - 75.5 MM Bore (1991-94 G15B FOR U.S.) (1991-94 4G15 FORCANADA) (OHC MITSUBISHI ENG'S--12 VALVE)Belt B-0191 92 TEETH

3 1.5-K,X (Q1500) ENG - 1985-90 - 4 Cyl. - 75.5 MM Bore (1985-88 1.5-K OHC CARB G15B 8 VALVEU.S.) (1989-90 1.5-X OHC MPI 4G15 8 VALVE CANADA) (MITSUBISHI ENG)Belt B-0128 1987-1990 92 TEETH

B-073 1985-1986 92 TEETHCam Sprocket S670 1987-1990 40 TEETHCrank Sprocket S633 1987-1990 20 TEETHBelt Tensioner BD33

4 1.6-Y & Z DOHC ENG - 1989-90 - 4 Cyl. - 76.9 MM Bore (4G61 MITSUBISHI ENG) (Y NON-TURBO, ZTURBO)Belt B-0165 151 TEETHBelt Tensioner BT194

5 1.6 (K1600) OHC ENG - 1971-77 - 4 Cyl. - 76.9 MM Bore (W/O BALANCE SHAFT-COLT &CHALLENGER) (G32B FOR U.S./4G32 FOR CANADA) (MITSUBISHI ENG)Crank Sprocket S605 1971 18 TEETHBelt Tensioner BT56Belt Guide BG53 LOOSE SIDE

6 1.6 (K1600) OHC ENG - 1978-82 - 4 Cyl. - 76.9 MM Bore (W/O BALANCE SHAFT-COLT) (G32B FORU.S./4G32 FOR CANADA) (MITSUBISHI ENG)Oil Pump Sprocket S903 1980-1981 24 TEETHBelt Tensioner BD32

68

DODGE (Continued)LineNo. Part Title Part No Description

7 1.6 (K1600) SOHC ENG - 1983-88 - 4 Cyl. - 76.9 MM Bore (COLT) (G32B FOR U.S./4G32 FORCANADA) (MITSUBISHI)Belt B-093 120 TEETHOil Pump Sprocket S8003 24 TEETH 24 TEETHBelt Tensioner BD32 1983 To 1/87

BT160 From 1/87 TO 19888 1.6 (Z1600) OHC ENG - 1977-80 - 4 Cyl. - 76.9 MM Bore (W/BALANCE SHAFT-RWD-COLT) (G32B

MITSUBISHI ENG)Belt B-013 122 TEETH CAMSHAFTCrank Sprocket S901 1977-1980 32 TEETH BAL. SHAFTBelt Tensioner BD32 CAMSHAFT

BD38 BAL. SHAFT9 1.7 (105) OHC ENG - 1978-83 - 4 Cyl. - 3.13 Bore (OMNI & CHARGER)

Belt B-017 121 TEETHCrank Sprocket S411 22 TEETHBelt Tensioner BT148

10 1.8-T (107) SOHC ENG - 1989-90 - 4 Cyl. - 3.17 Bore (W/BALANCE SHAFT-COLT 8 VALVE) (4G37MITSUBISHI ENG) NON-TURBOBelt B-0158 1990 122 TEETH TIMING BELT

B-093 1989 120 TEETH TIMING BELTBelt Tensioner BD38 BALANCE SHAFT BELT TENSIONER

BT160 TIMING BELT TENSIONER11 1.8-C (112) SOHC ENG - 1993-94 - 4 Cyl. - 3.19 Bore (W/O BALANCE SHAFT-16 VALVE) (4G93

MITSUBISHI ENG) TURBOCHARGEDBelt B-0201 121 TEETH

12 2.0 (U2000) SOHC ENG - 1974-75 - 4 Cyl. - 84 MM Bore (W/O BALANCE SHAFT-COLT) (4G52MITSUBISHI ENG)Timing Kit 3DR102-2 KIT INCLUDES [3DR102], [S458], [S455], [BD31], [BD30] & [BT49]

(CAMSHAFT KIT)Chain 3DR102 102 LINKS CAMSHAFTCam Sprocket S458 38 TEETHCrank Sprocket S407 34 TEETH OUTER

S455 19 TEETH INNERChain Tensioner BT49Chain Guide BD30 TENSION SIDE

BD31 SLACK SIDE13 2.0 (A2000) SOHC ENG - 1984-91 - 4 Cyl. - 85 MM Bore (COLT VISTA) (G63B MITSUBISHI ENG)

Belt B-0158 From 10/1/86 TO 1991 122 TEETH CAMSHAFTB-089 1984 To 10/1/86 122 TEETH CAMSHAFTB-090 1984 To 3/1/88 55 TEETH BALANCE SHAFT

Belt Tensioner BT105 CAMSHAFTBT106 1984 To 5/87 BALANCE SHAFTBT161 From 5/87 TO 1991 BALANCE SHAFT

14 2.0 (U2000) OHC ENG - 1976-77 - 4 Cyl. - 84 MM Bore (W/BALANCE SHAFT-COLT) (G52BMITSUBISHI ENG)Timing Kit 3-102S KIT INCLUDES [3DR102-2] CAMSHAFT KIT & [8MMSR90-1]



[BG51] (BALANCE SHAFT KIT)Continued on Next Page

69


14 2.0 (U2000) OHC ENG - 1976-77 - 4 Cyl. - 84 MM Bore (W/BALANCE SHAFT-COLT) (G52BMITSUBISHI ENG) (Continued)Balance Shaft Elim. Kit BSEK122 KIT INCLUDES CHAIN, OIL PUMP SHAFT PLUG, OIL GALLEY

PLUG, OIL PUMP MOUNTING GASKET AND INSTRUCTIONSHEET



Balance Shaft Sprocket S567 17 TEETH (2) REQ.Chain Tensioner BT49Chain Guide BD30 TENSION SIDE

BD31 SLACK SIDEBG48 BAL. SHAFT; LOWER LEFTBG51 BAL. SHAFT; LOWER RIGHT

15 2.0-Y (122) DOHC ENG - 1995-99 - 4 Cyl. - 3.44 BoreBelt B-0246 150 TEETH

16 2.0-C,F (122) SOHC ENG - 1995-05 - 4 Cyl. - 3.45 Bore (95-05 NEON)(95-00 STRATUS)(SX 2.0CANADA ONLY)Belt B-0245 112 TEETH

17 2.2 (135) SOHC ENG - 1981-94 - 4 Cyl. - 3.44 Bore (INCLUDES FRONT WHEEL DRIVE MINIVANS)Chain 201 1990-1994 60 LINKS BALANCE SHAFTBelt B-0153 1989-1994 124 TEETH CAMSHAFT

B-071 1981-1988 124 TEETH CAMSHAFTCam Sprocket S616 1981-1988 40 TEETHCrank Sprocket S417 1981-1987 20 TEETH BELT DRIVE

S640 1990-1994 36 TEETH BALANCE SHAFTBalance Shaft Sprocket S642 1990-1994 18 TEETHBelt Tensioner BT192 1989-1994 BELT

BT91 1981-1988 BELTChain Tensioner BT298 1990-1994 BAL. SHAFTChain Guide BG297 1990-1994 BAL. SHAFT

18 2.2-A (135) DOHC ENG. - 1992-93 - 4 Cyl. - 3.44 Bore (DAYTONA IROC R/T) TURBOCHARGEDChain 201 60 LINKS BALANCE SHAFTBelt B-0206 131 TEETHCrank Sprocket S640 36 TEETH FOR USE W/BALANCE SHAFT CHAINBalance Shaft Sprocket S642 18 TEETHChain Tensioner BT298 BALANCE SHAFT CHAIN TENSIONERChain Guide BG297 BALANCE SHAFT CHAIN GUIDE

19 2.4-B,J,S,X (148) DOHC ENG - 1995-07 - 4 Cyl. - 3.44 Bore (CARAVAN,GRANDCARAVAN,NEON,STRATUS) INCLUDES TURBOCHARGEDChain 201 60 LINKS BALANCE SHAFTBelt B-0265 146 TEETH CAMSHAFT TIMING BELTBalance Shaft Sprocket S642 18 TEETHChain Tensioner BT298 1995-2006 BAL. SHAFT; EXC. NEON, 2004 CARAVANChain Guide BG297 1995-2006 BAL. SHAFT LOWER; EXC. NEON, 2004 CARAVAN

20 2.4-G (2351CC) SOHC ENG - 2001-05 - 4 Cyl. - 3.41 Bore (STRATUS SE,SXT) 16VBelt B-0168 65 TEETH BALANCE SHAFT

B-0232 123 TEETH CAMSHAFT21 2.5-J,K,V (153) OHC ENG - 1986-95 - 4 Cyl. - 3.444 Bore (INCLUDES TURBO) (INCLUDES VANS)

Timing Kit B-0114-1 1986-1987 KIT INCLUDES [B-0114], (2) [S714] & [S709]Chain 201 60 LINKS BALANCE SHAFTContinued on Next Page

70


21 2.5-J,K,V (153) OHC ENG - 1986-95 - 4 Cyl. - 3.444 Bore (INCLUDES TURBO) (INCLUDES VANS)(Continued)Belt B-0114 1986-1987 126 TEETH CAMSHAFT


Cam Sprocket S714 1986-1987 40 TEETHCrank Sprocket S640 36 TEETH CHAIN; OUTER

S709 1986-1987 20 TEETH BELTBalance Shaft Sprocket S642 18 TEETH LOWERBelt Tensioner BT192 1989-1995 BELT

BT94 1986-1988 BELTChain Tensioner BT298 BALANCE SHAFTChain Guide BG297 BALANCE SHAFT

22 2.5-H,N (152) ENG - 1995-00 - V6 - 3.29 Bore (AVENGER, STRATUS) (24 VALVE SOHC MITSUBISHIENG)Belt B-0259 187 TEETHCam Sprocket S866 50 TEETHBelt Tensioner BT271 RIGHT HAND; TENSIONER PULLEY

BT5120 RIGHT HAND; TENSIONER ARMBT5121 RIGHT HAND UPPER; HYDRAULIC TENSIONER

Idler BT227 LEFT HAND; IDLER PULLEY23 2.6 (2600) SOHC ENG - 1978-87 - 4 Cyl. - 91.1 MM Bore (W/BALANCE SHAFT) (G54B MITSUBISHI

ENG) (INCLUDES MINIVANS)Timing Kit 3-102S KIT INCLUDES [3DR102-2] CAMSHAFT KIT & [8MMSR90-1]



[BG51] (BALANCE SHAFT KIT)Balance Shaft Elim. Kit BSEK122 KIT INCLUDES CHAIN, OIL PUMP SHAFT PLUG, OIL GALLEY



Cam Sprocket S458 38 TEETHCrank Sprocket S407 1978-1987 34 TEETH OUTER

S455 1978-1987 19 TEETH INNERBalance Shaft Sprocket S567 17 TEETH (2) REQ.Chain Tensioner BT49Chain Guide BD30 1978-1987 TENSION SIDE

BD31 LOOSE SIDEBG48 1978-1987 BAL. SHAFT LOWER LEFTBG51 1978-1987 BAL. SHAFT LOWER RIGHTBG64 1978-1987 BAL. SHAFT UPPER

24 2.7 (167) DOHC ENG - 1998-10 - V6 - 3.38 Bore (AVENGER, CHARGER, INTREPID, MAGNUM,STRATUS) INCLUDES FLEX FUELTiming Kit 3-397S 2000-2002 KIT INCLUDES [397], (2) [193], [S839], [S840], [S860],

[BT426A], (2) [BT427], [BT507], [BG423A], [BG424], [BG425](SBEC TARGET WHEEL) 2000-01 INTREPID, 2001-02 STRATUS

3-397SA 1998-1999 KIT INCLUDES [397], (2) [193], [S839], [S840], [S860],[BT426A], (2) [BT427], [BT506], [BG423A], [BG424], [BG425](W/SBEC TARGET WHEEL) INTREPID


71


24 2.7 (167) DOHC ENG - 1998-10 - V6 - 3.38 Bore (AVENGER, CHARGER, INTREPID, MAGNUM,STRATUS) INCLUDES FLEX FUEL (Continued)Timing Kit 3-397SB 2003-2006 KIT INCLUDES [397], (2) [193], [S839], [S840], [S862],

[BT426A], (2) [BT427], [BT507], [BG423A], [BG424], [BG425](W/NGC TARGET WHEEL) 2002-04 INTREPID, 2002-06 STRATUS

3-397SBX 1998-1999 KIT INCLUDES [397], (2) [193], [BT426A], (2) [BT427],[BT506], [BG423A], [BG424], [BG425] DOES NOT INCLUDESPROCKETS

3-397SX 2000-2007 KIT INCLUDES [397], (2) [193], [BT426A], (2) [BT427],[BT507], [BG423A], [BG424], [BG425] DOES NOT INCLUDESPROCKETS

Chain 193 1998-2007 44 LINKS SECONDARY (2) REQUIRED397 1998-2007 180 LINKS PRIMARY

Cam Sprocket S840 1998-2007 42 TEETH RIGHT HANDS860 1998-2001 42 TEETH LEFT HAND (SBEC TARGET WHEEL)

INTREPIDS860 2001-2002 42 TEETH LEFT HAND; W/SBEC TARGET WHEEL;

STRATUSS862 2002-2007 42 TEETH LEFT HAND; W/NGC TARGET WHEEL;

EXCLUDES 2002 STRATUSCrank Sprocket S839 1998-2007 21 TEETHChain Tensioner BT426 1998-2007 OLD DESIGN W/PLASTIC CONSTRUCTION RIGHT

TENSIONER ARMBT426A 1998-2007 NEW DESIGN W/ALUMINUM CONSTRUCTION RIGHT

TENSIONER ARMBT427 1998-2007 SECONDARY TENSIONER; (2) REQUIREDBT506 1998-1999 PRIMARY TENSIONERBT507 2000-2007 PRIMARY HYDRAULIC TENSIONERMSB-02 INCLUDES: 2 MOUNTING BOLTS AND STOP BLOCK

ASSEMBLY TENSIONER ARM STOP BLOCK; PREVENTS CHAINBACKLASH; NOTE: USE WHEN REPLACING NEW TIMINGCHAIN AND TENSIONER. DO NOT USE WITH OLDCOMPONENTS

Chain Guide BG423 1998-2007 OLD DESIGN W/PLASTIC CONSTRUCTION LEFTHAND; LONG

BG423A 1998-2007 NEW DESIGN W/ALUMINUM CONSTRUCTION LEFTHAND; LONG

BG424 1998-2007 LEFT HAND (SHORT)BG425 1998-2007 RIGHT HAND (SHORT)

25 170 ENG - 1960-69 - 6 Cyl. - 3.400 Bore3pc Set 3-495S INCLUDES [495], [S314] & [S291]Chain 495 50 LINKSCrank Sprocket S291 19 TEETH

26 3.0 (181) DOHC ENG - 1991-96 - V6 - 3.59 Bore (STEALTH 6G72 MITSUBISHI ENG) INCTURBOCHARGEDBelt B-0195 257 TEETHBelt Tensioner BT271 RIGHT HANDIdler BT227

27 3.0-3,H (181) SOHC ENG - 1987-00 - V6 - 3.59 Bore (INCLUDES MINIVANS) (6G72 12V MITSUBISHIENG)Belt B-0139 149 TEETHBelt Tensioner BT195

72


28 3.0-H (181) SOHC ENG - 2001-05 - V6 - 3.59 Bore (STRATUS) (24V MITSUBISHI ENG)Belt B-0259 187 TEETHCam Sprocket S866 50 TEETHBelt Tensioner BT271 R.H. PULLEY

BT5120 TENSIONER ARMBT5121 TENSIONER

Idler BT227 L.H. PULLEY29 3.0-U (182) SOHC ENG - 1990-92 - V6 - 3.587 Bore (MONACO ONLY) (RENAULT ENG)

Chain 3SR44 44 LINKS OIL PUMP3SR94 94 LINKS TIMING (2) REQ.

Cam Sprocket S714 40 TEETH LEFT HAND30 3.2-J (197) SOHC ENG - 1998-01 - V6 - 3.62 Bore

Belt B-0295 201 TEETHBelt Tensioner BT357 PULLEY ONLY. DOES NOT INCLUDE BRACKET AND

HYDRAULIC TENSIONER31 198 ENG - 1970-74 - 6 Cyl. - 3.400 Bore

3pc Set 3-495S INCLUDES [495], [S314] & [S291]Chain 495 50 LINKSCrank Sprocket S291 19 TEETH

32 3.3 (201) OHV ENG - 1990-10 - V6 - 3.66 Bore (CARAVAN,DYNASTY,GRAND CARAVAN,INTREPID)GAS,CNG,FLEX FUELCam Thrust Plate MD100 .297 PLATE THICKNESS FOR USE W/S788 & S934 CAM


3-388S 1990-2004 INCLUDES [388], [S788] & [S715] KIT CONTAINSSOFTBACK CHAIN; REQUIRES BOLT ON SNUBBER; NOTPROVIDED

Chain 300 2006-2010 64 LINKS388 1990-2005 64 LINKS SOFTBACK CHAIN; REQUIRES BOLT ON

SNUBBER; NOT PROVIDEDCam Sprocket S788 1990-2004 40 TEETH USE NEW THRUST PLATE SUPPLIED



S927 2006-2010 20 TEETH33 3.5-G,M,V (215) SOHC ENG. - 2000-10 - V6 - 3.78 Bore (AVENGER, CHARGER, CHALLENGER,

INTREPID, MAGNUM)Belt B-0295 2000-2008 201 TEETHBelt Tensioner BT357 2001-2003 INTREPID; PULLEY ONLY; DOES NOT INCLUDE

BRACKET AND HYDRAULIC TENSIONER34 3.5-F (215) SOHC ENG - 1993-97 - V6 - 3.78 Bore (INTREPID)

Belt B-0219 1993-1994 200 TEETHB-0255 1995-1997 202 TEETH

Belt Tensioner BT357 PULLEY ONLY; DOES NOT INCLUDE BRACKET ANDHYDRAULIC TENSIONER

35 3.7 (225) OHV ENG - 1960-83 - 6 Cyl. - 3.41 Bore3pc Set 3-495S INCLUDES [495], [S314] & [S291]Chain 495 50 LINKSCrank Sprocket S291 19 TEETH

73


36 3.8-L,P,1 (230, 231) OHV ENG - 1994-2010 - V6 - 3.78 Bore (CARAVAN,GRAND CARAVAN)Cam Thrust Plate MD100 .297 PLATE THICKNESS FOR USE W/S788 & S934 CAM


3-388S 1994-2004 INCLUDES [388], [S788] & [S715] KIT CONTAINSSOFTBACK CHAIN; REQUIRES BOLT ON SNUBBER; NOTPROVIDED


SNUBBER (NOT PROVIDED)Cam Sprocket S788 1994-2004 40 TEETH USE NEW THRUST PLATE SUPPLIED



S927 2006-2010 20 TEETH37 3.8 (230) ENG - 1942-59 - 6 Cyl. - 3.25 Bore INCLUDES VANS

Cam Sprocket S265 1955-1959 38 TEETHCrank Sprocket S127 1942 19 TEETH

S127 1946-1954 19 TEETHS266 1955-1959 19 TEETH

38 3.9 (239) ENG - 1953-54 - 8 Cyl. - 3 7/16 BoreCrank Sprocket S127 19 TEETH

39 241 ENG - 1953-54 - 8 Cyl. - 3 7/16 BoreCrank Sprocket S127 19 TEETH

40 270 ENG - 1955-56 - 8 Cyl. - 3 5/8 BoreChain 348 68 LINKSCam Sprocket S273 46 TEETHCrank Sprocket S274 23 TEETH


42 315 ENG - 1956 - 8 Cyl. - 3 5/8 BoreChain 348 68 LINKSCam Sprocket S273 46 TEETHCrank Sprocket S274 23 TEETH

43 5.2 (318) ENG - 1960-89 - 8 Cyl. - 3.91 Bore3pc Set 3-160S 1965-1989 INCLUDES [160], [S402] & [S297] HEAVY DUTY

3-361S 1965-1988 INCLUDES [361], [S358] & [S359] STANDARD DUTYChain 160 1965-1989 68 LINKS HEAVY DUTY

348 1960-1964 68 LINKS361 1965-1988 68 LINKS STANDARD DUTY

Cam Sprocket S273 1960-1964 46 TEETHS358 1965-1988 46 TEETH USE W/361 STANDARD DUTY CHAINS402 1965-1989 46 TEETH USE W/160 HEAVY DUTY CHAIN

Crank Sprocket S274 1960-1964 23 TEETHS297 1965-1989 23 TEETH USE W/160 HEAVY DUTY CHAINS359 1965-1988 23 TEETH USE W/361 STANDARD DUTY CHAIN

44 325 ENG - 1957-58 - 8 Cyl. - 3 11/16 BoreChain 348 68 LINKSCam Sprocket S273 46 TEETHContinued on Next Page

74


44 325 ENG - 1957-58 - 8 Cyl. - 3 11/16 Bore (Continued)Crank Sprocket S274 23 TEETH

45 5.3 (326) ENG - 1959 - 8 Cyl. - 3.95 BoreChain 348 68 LINKSCam Sprocket S273 46 TEETHCrank Sprocket S274 23 TEETH

46 5.6 (340) ENG - 1968-73 - 8 Cyl. - 4.04 Bore (CHALLENGER,CHARGER,CORONET,DART,POLARA)3pc Set 3-160S INCLUDES [160], [S402] & [S297]Chain 160 68 LINKSCam Sprocket S402 46 TEETHCrank Sprocket S297 23 TEETH

47 5.7-H,2,T (345) OHV ENG - 2005-14 - 8 Cyl - 3.92 Bore (MAGNUM R/T,CHALLENGER,CHARGER RT)HEMITiming Kit 3-704S 2005-2008 KIT INCLUDES (1) 704, (1) S896, (1) S889, (1) BT5489Chain 704 2005-2008 86 LINKSCam Sprocket S896 2005-2008 52 TEETHCrank Sprocket S889 2005-2008 26 TEETHChain Tensioner BT5489 2005-2008

48 5.7 (350) ENG - 1958 - 8 Cyl. - 4 1/16 BoreChain 495 50 LINKSCrank Sprocket S291 19 TEETH

49 5.9 (360) ENG - 1971-80 - 8 Cyl. - 4.000 Bore3pc Set 3-160S INCLUDES [160], [S402] & [S297] HEAVY DUTY


361 68 LINKS STANDARD DUTYCam Sprocket S358 46 TEETH USE W/[361] STANDARD DUTY CHAIN

S402 46 TEETH USE W/[160] HEAVY DUTY CHAINCrank Sprocket S297 23 TEETH USE W/[160] HEAVY DUTY CHAIN

S359 23 TEETH USE W/[361] STANDARD DUTY CHAIN50 361 OHV ENG - 1958-66 - 8 Cyl. - 4.13 Bore

3pc Set 3-168SA INCLUDES [168], [S380] & [S339] HEAVY DUTY3-501SA 1966 INCLUDES [501], [S366] & [S367] STANDARD DUTY; EXC.

RACING ENGS.Chain 168 66 LINKS HEAVY DUTY

495 1958-1965 50 LINKS STANDARD DUTY; EXC. RACING ENGS.501 1966 50 LINKS STANDARD DUTY; EXC. RACING ENGS.

Cam Sprocket S366 1966 38 TEETH STANDARD DUTY; EXC. RACING ENGS.S380 50 TEETH HEAVY DUTY

Crank Sprocket S291 1958-1965 19 TEETH STANDARD DUTY; EXC. RACING ENGS.S339 25 TEETH HEAVY DUTYS367 1966 19 TEETH STANDARD DUTY; EXC. RACING ENGS.

51 6.1-3,W (370) OHV ENG - 2006-10 - 8 Cyl - 4.06 Bore (MAGNUM, CHALLENGER, CHARGER SRT8)HEMITiming Kit 3-704S KIT INCLUDES (1) 704, (1) S896, (1) S889, (1) BT5489Chain 704 86 LINKSCam Sprocket S896 52 TEETHCrank Sprocket S889 26 TEETHChain Tensioner BT5489

52 6.3 (383) ENG - 1959-71 - 8 Cyl. - 4 1/4 Bore3pc Set 3-168SA 1959-1971 INCLUDES [168], [S380] & [S339] HEAVY DUTY

3-501SA 1966-1971 INCLUDES [501], [S366] & [S367] STANDARD DUTYContinued on Next Page

75


52 6.3 (383) ENG - 1959-71 - 8 Cyl. - 4 1/4 Bore (Continued)Chain 168 1959-1971 66 LINKS HEAVY DUTY



Crank Sprocket S291 1959-1965 19 TEETH STANDARD DUTYS339 1959-1971 25 TEETH HEAVY DUTYS367 1966-1971 19 TEETH STANDARD DUTY

53 400 ENG - 1972-78 - 8 Cyl. - 4.342 Bore3pc Set 3-168SA INCLUDES [168], [S380] & [S339] HEAVY DUTY


501 50 LINKS STANDARD DUTYCam Sprocket S366 38 TEETH STANDARD DUTY


S367 19 TEETH STANDARD DUTY54 413 ENG - 1959-65 - 8 Cyl. - 4.19 Bore

3pc Set 3-168SA 1959 INCLUDES [168], [S380] & [S339] SINGLE BOLT CAMChain 168 1959 66 LINKS

495 1960-1965 50 LINKSCam Sprocket S380 1959 50 TEETHCrank Sprocket S291 1960-1965 19 TEETH

S339 1959 25 TEETH55 426 WEDGE ENG - 1963-65 - 8 Cyl. - 4 1/4 Bore

3pc Set 3-168SA INCLUDES [168], [S380] & [S339] H.D.Chain 168 66 LINKS H.D.


S339 25 TEETH H.D.56 7.0 (426) HEMI ENG - 1966-71 - 8 Cyl. - 4 1/4 Bore

3pc Set 3-168S INCLUDES [168], [S340] & [S339]Chain 168 66 LINKSCam Sprocket S340 50 TEETH W/3 BOLT CAMCrank Sprocket S339 25 TEETH

57 7.2 (440) ENG - 1966-78 - 8 Cyl. - 4.320 Bore3pc Set 3-168S 1969-1972 INCLUDES [168], [S340] & [S339] HEAVY DUTY; W/3

BOLT CAM & W/STOCK 3/2BC3-168SA INCLUDES [168], [S380] & [S339] HEAVY DUTY; W/SINGLE BOLT

CAM3-501SA INCLUDES [501], [S366] & [S367] STANDARD DUTY


Cam Sprocket S340 50 TEETH HEAVY DUTY; W/3 BOLT CAMS366 38 TEETH STANDARD DUTYS380 50 TEETH HEAVY DUTY; W/SINGLE BOLT CAM


58 8.0-E (488) OHV ENG - 1992-02 - 10 Cyl - 4.000 Bore VIPER (ACR,R/T-10,GTS,GT2)Chain 160 1992-1997 68 LINKS

76

DODGE TRUCKEngine Year Line Engine Year Line Engine Year Line

4 Cyl.2.0 (122) SOHC 1979-82 12.0 (122) SOHC 1983-89 22.2 (135) SOHC 1982-88 32.3 (2346CC) SOHC 1983-85 42.4-G (144) SOHC 1993 52.4-W (144) SOHC 1990-92 62.5-P (153) OHV 1996-02 72.5 (153) SOHC 1989-95 82.6 (2555) SOHC 1979-89 96 Cyl.2.8 (170) OHV 1960-69 103.0-S (181) SOHC 1989-91 113.2 (198) 1970-73 12218 1942-54 13218 1935-41 14

6 Cyl. (Continued)

225 1960-87 153.7-K (226) SOHC 2002-11 16230 1942-60 173.9 (239) OHV 1987-03 188 Cyl.241 1954 196 Cyl.251 & 251 PREM. 1953-68 208 Cyl.259 1955-56 216 Cyl.265 1954-60 228 Cyl.270 1955-56 23273 1964-67 24

8 Cyl. (Continued)

4.7-N,J,P (285,287) SOHC 1998-10 25315 1957-59 265.2 (318) 1959-03 27331 OHV 1954-56 285.7-2,D,T (345) OHV 2003-14 29354 OHV 1955-59 305.9 (360) OHV 1970-03 31361 OHV 1960-77 326.3 (383) 1963-71 33400 1972-78 346.7 (413) 1960-77 35440 ENG 1972-79 3610 Cyl.8.0-W (488) OHV 1994-03 37


1 2.0 (122) SOHC ENG - 1979-82 - 4 Cyl. - 84 MM Bore (G52B MITSUBISHI ENG)Timing Kit 3-102S KIT INCLUDES [3DR102-2] CAMSHAFT KIT & [8MMSR90-1]






Cam Sprocket S458 38 TEETHCrank Sprocket S407 34 TEETH OUTER

S455 19 TEETH INNERBalance Shaft Sprocket S567 17 TEETH (2) REQ.Chain Tensioner BT49Chain Guide BD30 CAMSHAFT; TENSION SIDE

BD31 CAMSHAFT; SLACK SIDEBG48 BALANCE SHAFT; LEFT HANDBG51 BALANCE SHAFT; LOWER RIGHTBG64 BALANCE SHAFT; RIGHT HAND

2 2.0 (122) SOHC ENG - 1983-89 - 4 Cyl. - 85 MM Bore (W/BALANCE SHAFT) (G63B MITSUBISHIENG)Belt B-0158 From 10/1/86 TO 1989 122 TEETH CAMSHAFT

B-089 1983 To 10/1/86 122 TEETH CAMSHAFTB-090 1983 To 3/88 55 TEETH BAL SHAFT

Belt Tensioner BT105 CAMSHAFTBT106 1983 To 5/87 BAL. SHAFTBT161 From 5/87 TO 1989 BAL. SHAFT

3 2.2 (135) SOHC ENG - 1982-88 - 4 Cyl. - 3.44 Bore (RAMPAGE,DAKOTA) (8V NON TURBO ENG)(FOR FRONT WHEEL DRIVE MINIVANS SEE CAR SECTION)Belt B-071 124 TEETHCam Sprocket S616 40 TEETHCrank Sprocket S417 20 TEETHBelt Tensioner BT91

77

DODGE TRUCK (Continued)LineNo. Part Title Part No Description

4 2.3 (2346CC) SOHC ENG - 1983-85 - 4 Cyl. - 90.9 MM Bore (RAM 50, POWER RAM 50)(TURBODIESEL) MITS ENG.Belt B-091 163 TEETH CAMSHAFT

B-092 83 TEETH BAL. SHAFTCam Sprocket S8004 48 TEETHCrank Sprocket S8005 24 TEETH TIMING

S8007 32 TEETH BAL. SHAFT5 2.4-G (144) SOHC ENG - 1993 - 4 Cyl. - 86.5 MM Bore (RAM 50) (4G64 MITSUBISHI ENG)

Belt B-0168 65 TEETH BAL. SHAFTB-0229 123 TEETH CAMSHAFT

Belt Tensioner BT105 CAMSHAFTBT197 BAL. SHAFT

6 2.4-W (144) SOHC ENG - 1990-92 - 4 Cyl. - 86.5 MM Bore (RAM 50) (G64B MITSUBISHI ENG)Belt B-0124 123 TEETH CAMSHAFTBelt Tensioner BT105 CAMSHAFT

BT161 BAL. SHAFT7 2.5-P (153) OHV ENG - 1996-02 - 4 Cyl. - 3.88 Bore (DAKOTA) (MAGNUM ENG)

Timing Kit 3-3SR64S KIT INCLUDES [3SR64], [S607], [S608], [BT167], [BG337]3pc Set 3-3SR64 INCLUDES [3SR64], [S608] & [S607]Chain 3SR64 64 LINKSCam Sprocket S608 48 TEETHCrank Sprocket S607 24 TEETHChain Tensioner BT167Chain Guide BG337 DAMPER

8 2.5 (153) SOHC ENG - 1989-95 - 4 Cyl. - 3.444 Bore (DAKOTA ONLY) (FOR FRONT WHEEL DRIVEMINIVANS SEE CAR SECTION)Chain 201 60 LINKS BALANCE SHAFTBelt B-0153 124 TEETH CAMSHAFTCrank Sprocket S640 36 TEETH OUTERBalance Shaft Sprocket S642 18 TEETH LOWERBelt Tensioner BT192 TIMING BELT IDLERChain Tensioner BT298 BALANCE SHAFTChain Guide BG297 BALANCE SHAFT

9 2.6 (2555) SOHC ENG - 1979-89 - 4 Cyl. - 91.1 MM Bore (W/BALANCE SHAFT) (FOR FRONTWHEEL DRIVE MINIVANS SEE CAR SECTION) (G54B MITSUBISHI ENG)Timing Kit 3-102S KIT INCLUDES [3DR102-2] CAMSHAFT KIT & [8MMSR90-1]






Cam Sprocket S458 38 TEETHCrank Sprocket S407 1979-1989 34 TEETH OUTER

S455 1979-1989 19 TEETH INNERBalance Shaft Sprocket S567 17 TEETH (2) REQ.Chain Tensioner BT49Chain Guide BD30 1979-1989 TENSION SIDE

BD31 LOOSE SIDEContinued on Next Page

78


9 2.6 (2555) SOHC ENG - 1979-89 - 4 Cyl. - 91.1 MM Bore (W/BALANCE SHAFT) (FOR FRONTWHEEL DRIVE MINIVANS SEE CAR SECTION) (G54B MITSUBISHI ENG) (Continued)Chain Guide BG48 1979-1989 BAL. SHAFT LOWER LEFT

BG51 1979-1989 BAL. SHAFT LOWER RIGHTBG64 1979-1989 BAL. SHAFT UPPER

10 2.8 (170) OHV ENG - 1960-69 - 6 Cyl. - 86.5 MM Bore (SERIES A100,D100,P100,P200) (INCLUDESVANS)3pc Set 3-495S INCLUDES [495], [S314] & [S291]Chain 495 50 LINKSCrank Sprocket S291 19 TEETH

11 3.0-S (181) SOHC ENG - 1989-91 - V6 - 3.59 Bore (1989 RAIDER) (1990-91 RAM 50) (6G72MITSUBISHI ENG)Belt B-0139 149 TEETHBelt Tensioner BT195

12 3.2 (198) ENG - 1970-73 - 6 Cyl. - 3.40 Bore (SERIES 100,200,300) INCLUDES VANS3pc Set 3-495S INCLUDES [495], [S314] & [S291]Chain 495 50 LINKSCrank Sprocket S291 19 TEETH

13 218 ENG - 1942-54 - 6 Cyl. - 3.250 BoreCrank Sprocket S127 19 TEETH

14 218 ENG - 1935-41 - 6 Cyl. - 3.250 BoreCrank Sprocket S127 19 TEETH

15 225 ENG - 1960-87 - 6 Cyl. - 3.40 Bore (SERIES 100,200,300)3pc Set 3-495S INCLUDES [495], [S314] & [S291] EXC. PREMIUM ENG.Chain 168 1963-1977 66 LINKS PREMIUM ENG.

495 50 LINKS EXC. PREMIUM ENG.Crank Sprocket S291 19 TEETH EXC. PREMIUM ENG.

S339 1963-1977 25 TEETH PREMIUM ENG.16 3.7-K (226) SOHC ENG - 2002-11 - V6 - 3.66 Bore (2004-10 DAKOTOA) (2004-09 DURANGO)

(NITRO 2007-11) (RAM 1500 2002-10)Timing Kit 3-393SA 2002-2003 KIT INCLUDES [393], (2) [194], [S861], [S824], [S832],

[BT418], [BT431], [BT432], (2) [BT433], [BG434], [BG435], [S863](WITH JTEC CAM SPROCKET)

3-393SB KIT INCLUDES [393], (2) [194], [BT418], [BT431], [BT432], (2)[BT433], [BG434], [BG435] SAME AS 3-393SA LESS SPROCKETS

3-393SD 2004-2011 KIT INCLUDES [393], (2) [194], [S824], [S868], [S861],[S863], [BT418], [BT431], [BT432], (2) [BT433], [BG434], [BG435](WITH NGC CAM SPROCKET)

Chain 194 94 LINKS SECONDARY (2) REQUIRED393 70 LINKS PRIMARY

Cam Sprocket S824 26 TEETH LEFT HANDS832 2002-2003 26 TEETH RIGHT HAND W/JTEC SPROCKETS868 2004-2011 26 TEETH RIGHT HAND W/NGC SPROCKET

Crank Sprocket S861 25 TEETHIdler Sprocket S863 50 TEETH PRIMARY; DOES NOT INCLUDE IDLER GEAR SHAFTChain Tensioner BT418 PRIMARY

BT431 SECONDARY RIGHTBT432 SECONDARY LEFT; EXCLUDES 2008-10 DAKOTABT433 SECONDARY ARM (2) REQUIRED

Chain Guide BG434 SECONDARY RIGHTBG435 SECONDARY LEFT

79


17 230 ENG - 1942-60 - 6 Cyl. - 3.25 Bore TRUCKS ONLYCam Sprocket S265 1955-1960 38 TEETHCrank Sprocket S127 1942-1954 19 TEETH

S266 1955-1960 19 TEETH18 3.9-M,X (239) OHV ENG - 1987-03 - V6 - 3.91 Bore (DAKOTA,DURANGO,RAM 1500,RAM 1500

VAN,D SERIES,B SERIES,W SERIES)3pc Set 3-160S 1987-1990 INCLUDES [160], [S402] & [S297] ROLLER TYPE

CHAIN3-380S 1998-2003 INCLUDES [380], [S712] & [S721] SILENT TYPE CHAIN3-380SA 1991-1997 INCLUDES [380], [S712], [S721] & [BT428] SILENT

TYPE CHAIN; INCLUDES TENSIONERChain 160 1987-1990 68 LINKS ROLLER TYPE CHAIN

380 1991-2003 68 LINKS SILENT TYPE CHAINCam Sprocket S402 1987-1990 46 TEETH


S721 1991-2003 23 TEETHChain Tensioner BT428 1991-2003

19 241 ENG - 1954 - 8 Cyl. - 3 7/16 Bore (C1B,C1C AFTER VT-334-9128,C1D AFTER VT-338-2117)Chain 348 68 LINKSCrank Sprocket S274 23 TEETH

20 251 & 251 PREM. ENG - 1953-68 - 6 Cyl. - 3 7/16 BoreChain 494 1959-1968 48 LINKSCam Sprocket S265 1955-1958 38 TEETHCrank Sprocket S127 1953-1954 19 TEETH

S266 1955-1958 19 TEETHS303 1959-1968 19 TEETH

21 259 ENG - 1955-56 - 8 Cyl. - 3.5625 BoreChain 160 1955-1956 68 LINKS

22 265 ENG - 1954-60 - 6 Cyl. - 3.44 Bore (1954-60 TRUCK, 1957-60 D300,W300, 1960 WMPOWERWAGON) L-HEADChain 494 1959-1960 48 LINKSCam Sprocket S265 1955-1958 38 TEETHCrank Sprocket S127 1954 19 TEETH

S266 1955-1958 19 TEETHS303 1959-1960 19 TEETH

23 270 ENG - 1955-56 - 8 Cyl. - 3.625 BoreChain 160 68 LINKS

24 273 ENG - 1964-67 - 8 Cyl. - 3 5/8 Bore (SERIES A100 INCLUDES VANS)3pc Set 3-361S INCLUDES [361], [S358] & [S359]Chain 361 68 LINKSCam Sprocket S358 46 TEETHCrank Sprocket S359 23 TEETH

25 4.7-N,J,P (285,287) SOHC ENG - 1998-10 - 8 Cyl. - 3.66 Bore (DAKOTA, DURANGO, RAM 1500)Timing Kit 3-393S 1998-2002 KIT INCLUDES [393], (2) [394], [S852], [S854], [S861],

[S863], [S865], [BT418], [BT419], [BT420], (2) [BD421], (2) [BG422]DURANGO, RAM 1500; W/JTEC CAM SPROCKET

3-393S 2000-2001 KIT INCLUDES [393], (2) [394], [S852], [S854], [S861],[S863], [S865], [BT418], [BT419], [BT420], (2) [BD421], (2) [BG422]DAKOTA; W/JTEC CAM SPROCKET


80


25 4.7-N,J,P (285,287) SOHC ENG - 1998-10 - 8 Cyl. - 3.66 Bore (DAKOTA, DURANGO, RAM 1500)(Continued)Timing Kit 3-393SC 2003-2008 KIT INCLUDES [393], (2) [394], [S852], [S870], [S861],

[BT418], [BT419], [BT420], (2) [BD421], (2) [BG422], [S863], [S865]W/NGC CAM SPROCKET; DOES NOT INCLUDE INSTALLATIONBOLTS

3-393SX 1998-2008 KIT INCLUDES [393], (2) [394], [BT418], [BT419],[BT420], (2) [BD421], (2) [BG422] NOTE; THIS KIT DOES NOTCONTAIN SPROCKETS

Chain 393 1998-2008 70 LINKS PRIMARY394 1998-2008 53 LINKS SECONDARY; (2) REQ.

Cam Sprocket S852 1998-2008 30 TEETH LEFT HANDS854 1998-2002 30 TEETH DURANGO, RAM 1500; RIGHT HAND;

W/JTEC TARGET WHEELS854 2000-2001 30 TEETH DAKOTA; RIGHT HAND; W/JTEC TARGET

WHEELS870 2003-2008 30 TEETH RIGHT HAND; W/NGC TARGET WHEEL

Crank Sprocket S861 25 TEETHIdler Sprocket S863 1998-2008 50 TEETH PRIMARY

S865 1998-2008 30 TEETH SECONDARYChain Tensioner BT418 PRIMARY TENSIONER

BT419 HYD SECONDARY TENSIONER; RIGHT HANDBT420 HYD SECONDARY TENSIONER; LEFT HAND

Damper BD421 SECONDARY TENSIONER ARM; (2) REQUIREDChain Guide BG422 (2) REQUIRED

26 315 ENG - 1957-59 - 8 Cyl. - 3 5/8 Bore (68 SERIES-D100,D200,D300,DL300,P300,PL300,W100,W20)Chain 160 68 LINKS W/HYD. LIFTERS

348 68 LINKS W/MECH. LIFTERSCrank Sprocket S274 23 TEETH W/MECH. LIFTERS

S297 23 TEETH W/HYD. LIFTERS27 5.2 (318) OHV ENG - 1959-03 - 8 Cyl. - 3.91 Bore (INCLUDES VANS)

3pc Set 3-160S 1968-1991 INCLUDES [160], [S402] & [S297] W/ROLLER CHAIN3-361S 1969-1989 INCLUDES [361], [S358] & [S359] W/SILENT TYPE

CHAIN3-380S 1990-2003 INCLUDES [380], [S712] & [S721]

Chain 160 1959-1962 68 LINKS ROLLER CHAIN W/.865" WIDTH; USEW/HYD. LIFTERS

160 1963-1967 68 LINKS W300 SERIES; ROLLER CHAIN W/.865"WIDTH;

160 1969-1991 68 LINKS ROLLER CHAIN348 1959-1962 68 LINKS SILENT CHAIN W/.637" WIDTH; USE

W/MECH. LIFTERS348 1963-1967 68 LINKS EXC. .637" WIDTH CHAIN & W300 SERIES;

SILENT CHAIN361 1963-1968 68 LINKS 100/200 W/.637" WIDTH CHAIN.361 1969-1988 68 LINKS SILENT CHAIN380 1990-2003 68 LINKS SILENT TYPE CHAIN

Cam Sprocket S358 1969-1989 46 TEETH USE W/361 SILENT CHAINS402 1968-1991 46 TEETH USE W/160 ROLLER CHAINS712 1990-2003 46 TEETH W/SILENT TYPE CHAIN

Crank Sprocket S274 1959-1962 23 TEETH FOR USE W/MECH. LIFTERS ONLYS274 1963-1968 23 TEETH EXC. APPLICATIONS REQUIRING .637"

WIDTH CHAIN & W300 SERIES,W300 PICKUPS297 1959-1962 23 TEETH FOR USE W/HYD. LIFTERS ONLY


81


27 5.2 (318) OHV ENG - 1959-03 - 8 Cyl. - 3.91 Bore (INCLUDES VANS) (Continued)Crank Sprocket S297 1963-1968 23 TEETH W300 SERIES,W300 PICKUP

S297 1969-1989 23 TEETH FOR USE W/160 CHAINS359 1965-1989 23 TEETH FOR USE W/361 CHAINS721 1990-2003 23 TEETH FOR USE W/380 CHAIN

28 331 OHV ENG - 1954-56 - 8 Cyl. - 3 .81 BoreGear Set 3504S INCLUDES [3502] & [3503]

29 5.7-2,D,T (345) OHV ENG - 2003-14 - 8 Cyl. - 3.92 Bore (DURANGO,RAM 1500,RAM 2500,RAM3500) (RAM 4000 - MEXICO) HEMITiming Kit 3-704S 2003-2008 KIT INCLUDES (1) 704, (1) S896, (1) S889, (1) BT5489Chain 704 2003-2008 86 LINKSCam Sprocket S896 2003-2008 52 TEETHCrank Sprocket S889 2003-2008 26 TEETHChain Tensioner BT5489 2003-2008

30 354 OHV ENG - 1955-59 - 8 Cyl. - 3.94 Bore (BASE TRUCK)Gear Set 3504S INCLUDES [3502] & [3503]

31 5.9 (360) OHV ENG - 1970-03 - 8 Cyl. - 4.00 Bore (INCLUDES VANS)3pc Set 3-160S 1970-1989 INCLUDES [160], [S402] & [S297] HEAVY DUTY

3-361S 1970-1988 INCLUDES [361], [S358] & [S359] STANDARD DUTY3-380S 1990-2003 INCLUDES [380], [S712] & [S721]

Chain 160 1971-1989 68 LINKS HEAVY DUTY361 1970-1988 68 LINKS STANDARD DUTY380 1990-2003 68 LINKS SILENT TYPE CHAIN

Cam Sprocket S358 1970-1988 46 TEETH USE W/361 STANDARD DUTY CHAINS402 1970-1989 46 TEETH USE W/160 HEAVY DUTY CHAINS712 1990-2003 46 TEETH USE W/380 SILENT TYPE CHAIN

Crank Sprocket S297 1970-1989 23 TEETH USE W/160 HEAVY DUTY CHAINS359 1970-1988 23 TEETH USE W/361 STANDARD DUTY CHAINS721 1990-2003 23 TEETH USE W/380 SILENT TYPE CHAIN

32 361 OHV ENG - 1960-77 - 8 Cyl. - 4.13 Bore3pc Set 3-168S 1972-1977 INCLUDES [168], [S340] & [S339] W/361-4 ENG.Chain 168 1960-1965 66 LINKS

168 1972-1977 66 LINKS W/361-2, 3 & 4 ENGS.Gear Set 3512S 1960-1971 INCLUDES [3512] & [3507] 500 & 600Cam Sprocket S340 1972-1977 50 TEETH W/361-4 ENG.

S432 1972-1977 50 TEETH W/361-3 ENG.Crank Sprocket S339 1960-1965 25 TEETH

S339 1972-1977 25 TEETH W/361-2, 3 & 4 ENGS.33 6.3 (383) ENG - 1963-71 - 8 Cyl. - 4.188 Bore (SERIES 100,200,300)

3pc Set 3-168SA INCLUDES [168], [S380] & [S339] HEAVY DUTY3-501SA INCLUDES [501], [S366] & [S367] STANDARD DUTY




34 400 ENG - 1972-78 - 8 Cyl. - 4.34 Bore SERIES 100,200,300,RAMCHARGER (INCLUDES VANS)3pc Set 3-168SA INCLUDES [168], [S380] & [S339] HEAVY DUTY


501 50 LINKS STANDARD DUTYCam Sprocket S366 38 TEETH STANDARD DUTYContinued on Next Page

82


34 400 ENG - 1972-78 - 8 Cyl. - 4.34 Bore SERIES 100,200,300,RAMCHARGER (INCLUDES VANS)(Continued)Cam Sprocket S380 50 TEETH HEAVY DUTYCrank Sprocket S339 25 TEETH HEAVY DUTY

S367 19 TEETH STANDARD DUTY35 6.7 (413) ENG - 1960-77 - 8 Cyl. - 4.19 Bore (1969-74 MOTOR HOME SERIES R3,4,5, 1960-77

SERIES 600,700,800,900,1000)3pc Set 3-168S 1972-1977 INCLUDES [168], [S340] & [S339] MEDIUM DUTYChain 168 1972-1977 66 LINKS LIGHT DUTY & MEDIUM DUTYCam Sprocket S432 1972-1977 50 TEETH LIGHT DUTYCrank Sprocket S339 1960-1965 25 TEETH

S339 1972-1977 25 TEETH LIGHT DUTY & MEDIUM DUTY36 440 ENG - 1972-79 - 8 Cyl. - 4.32 Bore (1972-79 SERIES 100-450) (INCLUDES VANS)

3pc Set 3-168SA INCLUDES [168], [S380] & [S339] HEAVY DUTY3-501SA INCLUDES [501], [S366] & [S367] STANDARD DUTY




37 8.0-W (488) OHV ENG - 1994-03 - V10 - 4.000 Bore (RAM 2500,3500)Chain 380 68 LINKS

EAGLEEngine Year Line Engine Year Line Engine Year Line

4 Cyl.1.5-A SOHC 1991-96 11.5-X SOHC 1989-90 21.6-Y DOHC 1989-90 31.8 (P1800) SOHC 1993-94 41.8 (1834CC) 1992-96 52.0-D,V (122) SOHC 1989-93 6

4 Cyl. (Continued)

2.0-E,R,U (122) DOHC 1990-94 72.0-F (122) DOHC 1993-98 82.0-Y (122) DOHC 1995-98 92.2 (132) SOHC 1988-89 102.4-G (144) SOHC 1993-96 112.4-W (144) SOHC 1992 12

4 Cyl. (Continued)

2.5 (150) OHV 1988-89 136 Cyl.3.0-J,U (182) SOHC 1988-92 143.3-T,U (201) OHV 1993-97 153.5-F (215) SOHC 1993-97 16


1 1.5-A SOHC ENG - 1991-96 - 4 Cyl. - 75.5 MM Bore (12 VALVE) (4G15 MITSUBISHI ENG)Belt B-0191 92 TEETH

2 1.5-X SOHC ENG - 1989-90 - 4 Cyl. - 75.5 MM Bore (MPI 8 VALVE) (4G15 MITSUBISHI ENG)Belt B-0128 92 TEETHCam Sprocket S670 40 TEETHCrank Sprocket S633 20 TEETHBelt Tensioner BD33

3 1.6-Y DOHC ENG - 1989-90 - 4 Cyl. - 82.3 MM Bore (SUMMIT) (4G61 MITSUBISHI ENG)Belt B-0165 151 TEETHBelt Tensioner BT194

4 1.8 (P1800) SOHC ENG - 1990-94 - 4 Cyl. - 3.39 Bore (W/BALANCE SHAFT-TALON-8 VALVE) (4G37MITSUBISHI ENG)Belt B-0158 122 TEETH CAMSHAFT

B-090 55 TEETH BAL. SHAFTBelt Tensioner BD38 BAL. SHAFT

BT160 CAMSHAFT

83

EAGLE (Continued)LineNo. Part Title Part No Description

5 1.8 (1834CC) ENG - 1992-96 - 4 Cyl. - 81 MM Bore (SUMMIT 4G93 SOHC ENG)Belt B-0201 121 TEETH

6 2.0-D,V (122) SOHC ENG - 1989-93 - 4 Cyl. - 85 MM Bore (2000 GTX, VISTA CANADA) (G63BMITSUBISHI ENG)Belt B-0155 122 TEETH CAMSHAFTBelt Tensioner BT106 BALANCE SHAFT

BT196 CAMSHAFT7 2.0-E,R,U (122) DOHC ENG - 1990-94 - 4 Cyl. - 3.34 Bore (TALON, 2000 GTX) (MITSUBISHI ENG)

INC. TURBOCHARGEDBelt B-0167 153 TEETH CAMSHAFT

B-0168 65 TEETH BALANCE SHAFTBelt Tensioner BT194 CAMSHAFT

BT197 BALANCE SHAFTBT225 LOWER ADJUSTER

8 2.0-F (122) DOHC ENG - 1993-98 - 4 Cyl. - 3.34 Bore (TALON TSi) EBG MITSUBISHITURBOCHARGED ENG.Belt B-0167 153 TEETH CAMSHAFT BELT; INTERFERENCE ENG.

APPLICATIONB-0168 65 TEETH BALANCE SHAFT BELT; INTERFERENCE ENG.

APPLICATIONBelt Tensioner BT194 TIMING BELT IDLER; R.H.

BT197 BALANCE SHAFT9 2.0-Y (122) DOHC ENG - 1995-98 - 4 Cyl. - 3.44 Bore (1996-98 TALON) (1995-98 TALON ESi)

Belt B-0246 150 TEETH10 2.2 (132) SOHC ENG - 1988-89 - 4 Cyl. - 88 MM Bore (RENAULT ENG)

Belt B-0140 118 TEETH11 2.4-G (144) SOHC ENG - 1993-96 - 4 Cyl. - 86.5 MM Bore (SUMMIT) (4G64 MITSUBISHI ENG)

Belt B-0168 65 TEETH BALANCE SHAFT BELTB-0230 124 TEETH CAMSHAFT BELT

Belt Tensioner BT196 CAMSHAFT BELT TENSIONERBT197 1993-1994 BALANCE SHAFT BELT TENSIONERBT197 1995-1996 BALANCE SHAFT BELT TENSIONER; EXC. CALIF.

12 2.4-W (144) SOHC ENG - 1992 - 4 Cyl. - 86.5 MM Bore (SUMMIT) (G64B MITSUBISHI ENG)Belt B-0204 123 TEETH CAMSHAFTBelt Tensioner BT106 BALANCE SHAFT

BT196 CAMSHAFT13 2.5 (150) OHV ENG - 1988-89 - 4 Cyl. - 3.88 Bore (PREMIER)

Timing Kit 3-3SR64S KIT INCLUDES [3SR64], [S607], [S608], [BT167], [BG337]3pc Set 3-3SR64 INCLUDES [3SR64], [S608] & [S607]Chain 3SR64 64 LINKSCam Sprocket S608 48 TEETHCrank Sprocket S607 24 TEETHChain Tensioner BT167Chain Guide BG337

14 3.0-J,U (182) SOHC ENG - 1988-92 - V6 - 3.587 Bore (1988-92 PREMIER) (RENAULT ENG) (1988 J)(1989-92 U)Chain 3SR44 44 LINKS OIL PUMP

3SR94 94 LINKS TIMING (2) REQ.15 3.3-T,U (201) OHV ENG - 1993-97 - V6 - 3.66 Bore (LH SERIES)

Cam Thrust Plate MD100 .297 PLATE THICKNESS FOR USE W/S788 CAM SPROCKETContinued on Next Page

84

EAGLE (Continued)LineNo. Part Title Part No Description

15 3.3-T,U (201) OHV ENG - 1993-97 - V6 - 3.66 Bore (LH SERIES) (Continued)3pc Set 3-388S INCLUDES [388], [S788] & [S715] KIT CONTAINS SOFTBACK

CHAIN, REQUIRES BOLT ON SNUBBER (NOT PROVIDED)Chain 388 64 LINKS SOFTBACK CHAIN. REQUIRES BOLT ON SNUBBER

(NOT PROVIDED)Cam Sprocket S788 40 TEETH USE NEW THRUST PLATE SUPPLIED W/THIS

SPROCKETCrank Sprocket S715 20 TEETH

16 3.5-F (215) SOHC ENG - 1993-97 - V6 - 3.78 Bore (LH SERIES)Belt B-0219 1993-1994 200 TEETH

B-0255 1995-1997 202 TEETHBelt Tensioner BT357 1995-1997 PULLEY ONLY. DOES NOT INCLUDE BRACKET AND

HYDRAULIC TENSIONER

FORDEngine Year Line Engine Year Line Engine Year Line

4 Cyl.1.3 (1340CC) OHV 1962-64 11.3-K,H (1295CC) 1988-97 297 (1598) OHV 1971-73 31.6 (98) OHV 1978-80 41.6 (98) OHC 1981-85 51.8-8 DOHC 1991-96 61.9-9 (116) OHC 1985-90 71.9-J (116) 1986-96 82.0-3,5,Z (121) DOHC 1995-04 92.0-H (122) SOHC 1984-87 102.0-A (122) DOHC 1993-97 112.0-P (122) SOHC 1997-04 122.0-N,2,9 (121) DOHC 2004-14 13122 (2000) OHC 1971-74 142.2-C & L (133) 1989-92 152.3 (140) HSC 1984-94 162.3 (140) SOHC 1974-93 176 Cyl.144 1960-64 182.5-B (152) DOHC 1993-97 194 Cyl.2.5-D (153) OHV 1986-91 206 Cyl.2.5-L (155) DOHC 1995-00 21170 1961-72 222.8 (171) OHV 1975-79 23

6 Cyl. (Continued)

3.0-S,1,G (182,183) DOHC 1996-12 243.0-U,1,2 (182) OHV 1986-07 253.0-Y (183) DOHC 1989-95 263.2-P (192) DOHC 1993-95 273.3-B,T,X (200) 1963-83 28215 1952-53 298 Cyl.221 1962-63 30221 1942 316 Cyl.223 1954-64 323.8-3,4,C,R (232) OHV 1982-04 333.9-6 (238) OHV 2004-07 348 Cyl.239 L-HEAD 1932-53 35239 OHV 1954 366 Cyl.240 1965-72 374.0-N (245) SOHC 2005-10 384.1 (250) 1969-80 398 Cyl.4.2 (255) 1980-82 40260 OHV 1962-65 41272 1955-57 424.6-R,Y (281) DOHC 2003-04 434.6-V (281) DOHC 1996-01 44

8 Cyl. (Continued)

4.6-X (281) SOHC 1996-04 454.6-V,W,6,9 (281) SOHC 1992-11 464.6-H (281) SOHC 2005-10 47289 OHV 1963-69 48292 1955-62 495.0 (302) 1968-95 50312 1956-57 515.4-S (330) DOHC 2005-12 52332 1958-59 53351C 1971-72 545.8-G,H,M 351W 1969-91 55351C 1970-74 56351 COBRA JET 1971-74 57351M 1975-79 58351M 1985-86 595.8-Z (355) DOHC 2013-14 60352 OHV 1958-67 61361 1958-59 62390 1961-71 63400 1971-78 64406 1962-63 65427 1963-68 66428 1966-70 67429 1968-73 68430 1959-60 69460 1972-78 70


1 1.3 (1340CC) OHV ENG - 1962-64 - 4 Cyl. - 3.19 Bore (CAPRI, CONSUL) (123E, 124E FORD GREATBRITIAN)Chain 172 46 LINKS

2 1.3-K,H (1295CC) ENG - 1988-97 - 4 Cyl. - 2.80 Bore (ASPIRE, FESTIVA) (1295CC SOHC)Belt B-0141 1988-1993 107 TEETH FESTIVA

B-0185 1994-1997 107 TEETH ASPIREBelt Tensioner BT164

85

FORD (Continued)LineNo. Part Title Part No Description

3 97 (1598) OHV ENG - 1971-73 - 4 Cyl. - 3 3/16 Bore3pc Set 3-172S INCLUDES [172], [S422] & [S423]Chain 172 46 LINKSCam Sprocket S422 34 TEETHCrank Sprocket S423 17 TEETH

4 1.6 (98) OHV ENG - 1978-80 - 4 Cyl. - 3.189 Bore (FIESTA 1598CC)Chain 172 46 LINKSCrank Sprocket S423 17 TEETH

5 1.6 (98) OHC ENG - 1981-85 - 4 Cyl. - 3.147 Bore (ESCORT, EXP)Belt B-067 97 TEETHCrank Sprocket S419 19 TEETHBelt Tensioner BT92Belt Guide BG95

6 1.8-8 DOHC ENG - 1991-96 - 4 Cyl. - 3.270 BoreBelt B-0179 145 TEETHBelt Tensioner BT213Idler BT214

7 1.9-9 (116) OHC ENG - 1985-90 - 4 Cyl. - 3.230 Bore (1.9-9 2BC 1985-86) (1.9-9 CFI 1987-90)Belt B-067 97 TEETHCam Sprocket S638 38 TEETHCrank Sprocket S419 19 TEETHBelt Tensioner BT92Belt Guide BG95Timing Cover MIC200 INNER

MOC200 OUTER8 1.9-J (116) ENG - 1986-96 - 4 Cyl. - 3.23 Bore (1.9-J EFI 1986-90) (1.9-J SFI 1991-96) (ESCORT,EXP)

Belt B-0194 From 3/26/91 TO 1996 97 TEETHB-067 1986 To 3/25/91 97 TEETH

Cam Sprocket S638 1986 To 3/25/91 38 TEETHCrank Sprocket S419 1986 To 3/25/91 19 TEETHBelt Tensioner BT350 1991-1996

BT92 1986-1990Belt Guide BG95Timing Cover MIC200 1986-1990 INNER

MOC200 1986-1990 OUTER9 2.0-3,5,Z (121) DOHC ENG - 1995-04 - 4 Cyl. - 3.34 Bore (1995-00 CONTOUR, 1998-03 ESCORT,

2000-04 FOCUS - MFI, ZTEC ENG.)Belt B-0258 1995-1997 131 TEETH

B-0294 1998-2004 129 TEETHBelt Tensioner BT5390 1995-1997 TENSIONERIdler BT5409 1995-1997 LEFT HAND; IDLER

BT5410 1995-1997 RIGHT HAND; IDLER10 2.0-H (122) SOHC ENG - 1984-87 - 4 Cyl. - 3.39 Bore (ESCORT,TEMPO) 8V MAZDA DIESEL ENG

Belt B-0103 148 TEETH CAMSHAFT11 2.0-A (122) DOHC ENG - 1993-97 - 4 Cyl. - 3.27 Bore (MFI) (MAZDA ENG) (PROBE)

Belt B-0228 135 TEETH12 2.0-P (122) SOHC ENG - 1997-04 - 4 Cyl. - 3.34 Bore (1997-02 ESCORT, 2000-04 FOCUS) (SPLIT

PORT INJECTION)Belt B-0283 99 TEETHBelt Tensioner BT5406Belt Guide BG95 1997-2002

86


13 2.0-N,2,9 (121) DOHC ENG - 2004-14 - 4 Cyl. - 3.44 Bore (SFI) (FOCUS, MONDEO (MEXICO) &TRANSIT CONNECT) 16V DURATEC GAS/FLEXTiming Kit 3-727S 2004-2011 INCLUDES [727F], [706F], (2) [S898], [S891], [S893],

[BT452], [BT5514], [BT5555], [BG449], [BG5556]Chain 706F 2004-2011 54 LINKS OIL PUMP CHAIN

727F 2004-2011 134 LINKS TIMING CHAINCam Sprocket S898 2004-2013 2 REQ.Crank Sprocket S891 2004-2013Oil Pump Sprocket S893 2004-2011 24 TEETHChain Tensioner BT452 2004-2011 OIL PUMP CHAIN TENSIONER

BT5514 2004-2013 TIMING CHAIN TENSIONER; RIGHT UPPERBT5555 2004-2011 TIMING CHAIN TENSIONER ARM

Chain Guide BG449 2004-2011 OIL PUMP CHAIN GUIDEBG5556 2004-2013 TIMING CHAIN GUIDE; LEFT UPPER

14 122 (2000) OHC ENG - 1971-74 - 4 Cyl. - 3.575 Bore (PINTO)Belt B-013 122 TEETH CAMSHAFTBelt Tensioner BT10

15 2.2-C & L (133) ENG - 1989-92 - 4 Cyl. - 3.390 Bore (SOHC 2.2-C NON-TURBO) (SOHC 2.2-LTURBO)Belt B-0134 110 TEETHBelt Tensioner BT166Idler BT215

16 2.3 (140) OHV ENG - 1984-94 - 4 Cyl. - 3.70 Bore (VIN CODES R,S & X) W/HSC & HSC-HIGHOUTPUTTiming Kit 3-505SA KIT INCLUDES [505], [S617], [S618], [BT127]3pc Set 3-505S INCLUDES [505], [S617] & [S618]Chain 505 46 LINKSCam Sprocket S618 36 TEETHCrank Sprocket S617 18 TEETHChain Tensioner BT127

17 2.3 (140) SOHC ENG - 1974-93 - 4 Cyl. - 3.78 Bore (VIN CODES 6,A,M,T,W,Y) (INCLUDES TURBOCHARGED)Belt B-014 1974-1992 129 TEETH

B-0210 1993 129 TEETHCam Sprocket S446 1974-1992 38 TEETHCrank Sprocket S447 1974-1992 19 TEETHTiming Cover MIC100 1974-1990 INNER

18 144 ENG - 1960-64 - 6 Cyl. - 3 1/2 BoreCam Thrust Plate MF1083pc Set 3-351S INCLUDES [351], [S308] & [S397]Chain 351 50 LINKSCam Sprocket S308 38 TEETHCrank Sprocket S397 19 TEETH

19 2.5-B (152) DOHC ENG - 1993-97 - V6 - 3.33 Bore (MFI) (MAZDA ENG)Belt B-0214 192 TEETHBelt Tensioner BT129 ARM

BT324 W/O ARMIdler BT128 LOWER

BT325 UPPER20 2.5-D (153) OHV ENG - 1986-91 - 4 Cyl. - 3.70 Bore (TAURUS) HSC

Timing Kit 3-505SA KIT INCLUDES [505], [S617], [S618], [BT127]3pc Set 3-505S INCLUDES [505], [S617] & [S618]Continued on Next Page

87


20 2.5-D (153) OHV ENG - 1986-91 - 4 Cyl. - 3.70 Bore (TAURUS) HSC (Continued)Chain 505 46 LINKSCam Sprocket S618 36 TEETHCrank Sprocket S617 18 TEETHChain Tensioner BT127

21 2.5-G,L (155) DOHC ENG - 1995-00 - V6 - 3.24 Bore (CONTOUR) DURATEC 24V MFITiming Kit 3-392S 1996-2000 KIT INCLUDES (2) [392], [S833], (2) [BT406], (2)

[BT408A], [BG409], [BG410] (NOTE: CAMSHAFT SPROCKETSARE INTEGRATED ONTO THE CAMSHAFTS)

Chain 392 61 LINKS 2 REQ.Crank Sprocket S833 18 TEETHChain Tensioner BT406 1996-2000 2 REQ.; HYD. TENSIONER

BT408A 1996-2000 2 REQ.; TENSIONER ARMChain Guide BG409 LEFT HAND

BG410 1996-2000 RIGHT HAND22 170 ENG - 1961-72 - 6 Cyl. - 3 1/2 Bore

Cam Thrust Plate MF1083pc Set 3-351S INCLUDES [351], [S308] & [S397]Chain 351 50 LINKSCam Sprocket S308 38 TEETHCrank Sprocket S397 19 TEETH

23 2.8 (171) OHV ENG - 1975-79 - V6 - 3.661 BoreGear Set 2760SA REPLACE AS A SET ONLY

24 3.0-S,1,G (182,183) DOHC ENG - 1996-2012 - V6 - 3.500 Bore (TAURUS,FREESTYLE,FORD500,FUSION) 24V GAS/FLEX FUEL DURATECTiming Kit 3-392S 1996-2000 KIT INCLUDES (2) [392], [S833], (2) [BT406], (2)


3-708S 2001-2007 KIT INCLUDES (2) [708], [S929], (2) [BT5549], (2)[BT5550], [BG5551], [BG5552] (NOTE: CAMSHAFT SPROCKETSARE INTEGRATED ONTO THE CAMSHAFTS) EXC. FUSION

3-708SA 2006-2009 INCLUDES (2) [708], [S929], (2) [BT5549], (2) [BT5550],(2) [BG5553] (NOTE: VVT CAM SPROCKETS ARE NOTINCLUDED) FUSION W/ VVT ENG.

Chain 392 1996-2000 61 LINKS 2 REQ.708 2001-2009 144 LINKS 2 REQ.


Chain Tensioner BT406 1996-2000 TIMING CHAIN TENSIONER; 2 REQ.BT408A 1996-2000 TIMING CHAIN TENSIONER ARM; 2 REQ.BT5549 2001-2009 TIMING CHAIN TENSIONER; 2 REQ.BT5550 2001-2009 TIMING CHAIN TENSIONER ARM; 2 REQ.

Chain Guide BG409 1996-2000 TIMING CHAIN GUIDE; LEFT HANDBG410 1996-2000 TIMING CHAIN GUIDE; RIGHT HANDBG5551 2001-2007 TIMING CHAIN GUIDE; LEFT HAND; EXC. FUSIONBG5552 2001-2007 TIMING CHAIN GUIDE; RIGHT HAND; EXC. FUSIONBG5553 2006-2009 FUSION; 2 REQ.; REPLACEMENT LINING FOR THE

R.H & L.H. TIMING CHAIN GUIDES LOCATED IN THE VVTHOUSING ASSEMBLY; LINING ONLY DOES NOT INCLUDEGUIDE ASSEMBLY

88


25 3.0-U,1,2 (182) OHV ENG - 1986-07 - V6 - 3.500 Bore (CODE 1 FLEX FUEL METHANOL) (CODE 2FLEX FUEL ETHANOL) (CODE U GAS) (PROBE 1990-92) (TAURUS 1986-07) (TEMPO 1992-94)3pc Set 3-374S INCLUDES [374], [S636] & [S649] 1986-98 EXC. 1992-94 TEMPO

W/M.T.3-396S 1999-2007 INCLUDES [396], [S859], [S856] EXCLUDING SHO

Chain 374 1986-1998 62 LINKS396 1999-2007 62 LINKS

Cam Sprocket S636 1986-1998 38 TEETHS856 1999-2007 38 TEETH EXCLUDING SHO

Crank Sprocket S649 19 TEETH 1986-98 EXC. 1992-94 TEMPO W/M.T.S749 1992-1994 19 TEETH TEMPO W/M.T.S859 1999-2007 19 TEETH EXCLUDING SHO

26 3.0-Y (183) DOHC ENG - 1989-95 - V6 - 3.500 Bore (SHO)Belt B-0248 1989-1995 155 TEETH CAM FRONT

27 3.2-P (192) DOHC ENG - 1993-95 - V6 - 3.50 Bore (SHO)Belt B-0248 1993-1995 155 TEETH CAM FRONT

28 3.3-B,T,X (200) ENG - 1963-83 - 6 Cyl. - 3.68 BoreCam Thrust Plate MF1083pc Set 3-351S INCLUDES [351], [S308] & [S397]Chain 351 50 LINKSCam Sprocket S308 38 TEETHCrank Sprocket S397 19 TEETH



31 221 ENG - 1942 - 8 Cyl. - 3.063 BoreCam Gear 4706 44 TEETH ALUM.

32 223 ENG - 1954-64 - 6 Cyl. - 3 5/8 Bore3pc Set 3-344S INCLUDES [344], [S249] & [S250] EXC. POLICE & TAXIChain 344 56 LINKS EXC. POLICE & TAXICam Sprocket S249 42 TEETH EXC. POLICE & TAXICrank Sprocket S250 21 TEETH EXC. POLICE & TAXI

33 3.8-3,4,C,R (232) OHV ENG - 1982-04 - V6 - 3.81 BoreGRANADA,LTD,MUSTANG,TAURUS,THUNDERBIRD) (FOR VANS SEE TRUCK APPLICATIONS)3pc Set 3-365SA 1982-1987 INCLUDES [365], [S542] & [S539]

3-376S 1988-2004 INCLUDES [376], [S700] & [S539]Chain 365 1982-1987 60 LINKS

376 1988-2004 60 LINKSCam Button CB200 1982-1987Cam Sprocket S542 1982-1987 42 TEETH

S700 1988-2004 42 TEETHCrank Sprocket S539 21 TEETHChain Tensioner BT323 From 5/10/89 TO 1998

89


34 3.9-6 (238) OHV ENG - 2004-07 - 6 Cyl. - 3.81 Bore (FREESTAR) (2004 MUSTANG)3pc Set 3-376S INCLUDES [376], [S700] & [S539]Chain 376 60 LINKSCam Sprocket S700 42 TEETHCrank Sprocket S539 21 TEETHChain Tensioner BT323 FREESTAR ONLY

35 239 ENG - 1932-53 - 8 Cyl. - 3.19 Bore (INC. 8BA) L-HEADGear Set 2727S 1949-1953 INCLUDES [2702] & [2701]Cam Gear 2702 1949-1953 44 TEETH ALUM

4706 1941-1948 44 TEETH ALUM.Crank Gear 2701 1949-1953 22 TEETH

36 239 ENG - 1954 - 8 Cyl. - 3.50 Bore (OHV)3pc Set 3-344S INCLUDES [344], [S249] & [S250]Chain 344 56 LINKSCam Sprocket S249 42 TEETHCrank Sprocket S250 21 TEETH

37 240 ENG - 1965-72 - 6 Cyl. - 4.000 BoreGear Set 2750AS ALUMINUM - REPLACE AS SET ONLY; STANDARD DUTY

2764S CAST- REPLACE AS A SET ONLY2766AS ALUMINUM - REPLACE AS SET ONLY. HEAVY DUTY2766S INCLUDES [2766] & [2765] FIBER - REPLACE AS SET ONLY

38 4.0-N (245) SOHC ENG - 2005-10 - V6 - 3.95 Bore (MUSTANG) SFITiming Kit 3-398S KIT INCLUDES (3) TIMING CHAINS, (1) B. SHAFT CHAIN, (2)

CAM SPROCKETS, (2) JACKSHAFT SPROCKETS, (3)TENSIONERS, (1) TENSIONER RESERVOIR, (3) GUIDES, (2)WASHERS. SOLD AS KIT ONLY; ENTIRE KIT MUST BEREPLACED DUE TO OE UPGRADES TO THE COMPONENTS.ENGINES WITH BALANCE SHAFT

39 4.1 (250) ENG - 1969-80 - 6 Cyl. - 3.68 BoreCam Thrust Plate MF108

40 4.2 (255) ENG - 1980-82 - 8 Cyl. - 3.68 BoreCam Thrust Plate MF1253pc Set 3-358SA INCLUDES [358], [S430] & [S431]Chain 358 58 LINKSCam Sprocket S430 42 TEETHCrank Sprocket S431 21 TEETH

41 260 OHV ENG - 1962-65 - 8 Cyl. - 3.80 Bore3pc Set 3-356S INCLUDES [356], [S326] & [S327]Chain 356 58 LINKSCam Sprocket S326 42 TEETHCrank Sprocket S327 21 TEETH


43 4.6-R,Y (281) DOHC ENG - 2003-04 - V8 - 3.55 Bore (2003-04 MUSTANG MACH 1, MUSTANG SVTCOBRA) (ROMEO ENG)Timing Kit 3-387SKF KIT INCLUDES (2) [387], (2) [189], [S764], [S766], [S869], (4)

[S790P], [BT404], [BT405], [BT429], [BT430], [BD393], [BD394],[BG391G], [BG392G] MUST USE FINE FINISH CHAIN IN COBRAAPPLICATION


90


43 4.6-R,Y (281) DOHC ENG - 2003-04 - V8 - 3.55 Bore (2003-04 MUSTANG MACH 1, MUSTANG SVTCOBRA) (ROMEO ENG) (Continued)Chain 189 44 LINKS SECONDARY (2) REQ.

387 116 LINKS PRIMARY (2) REQ.Cam Thrust Plate Spacer S803SPCam Sprocket S764 42 TEETH LEFT PRIMARY

S766 42 TEETH RIGHT PRIMARYS790P 20 TEETH SECONDARY R.H. & L.H.; (4) REQ.; NOT

INTERCHANGABLE W/S790Crank Sprocket S869 21 TEETH 1 PC DESIGN WITH HUB; HUB ACTS AS SPACERChain Tensioner 5497B OE YR3Z-6K282-AA TENSIONER BOLT; MUST BE USED W/

BD393 & BD394BT404 SECONDARY LEFTBT405 SECONDARY RIGHTBT429 PRIMARY RIGHTBT430 PRIMARY LEFT

Damper BD393 LEFT HAND ARM; MUST USE W/ 5497B PIVOT BOLT (NOTINCLUDED)

BD394 RIGHT HAND ARM; MUST USE W/ 5497B PIVOT BOLT (NOTINCLUDED)

Chain Guide BG391G LEFT; REQUIRES NEW BOLTS - NOT SUPPLIEDBG392G RIGHT; REQUIRES 2 MOUNTING BOLTS NOT SUPPLIED;

REPLACES [BG392]44 4.6-V (281) DOHC ENG - 1996-01 - V8 - 3.55 Bore (MUSTANG SVT COBRA) NOT MANUFACTURED

IN 2000 (ROMEO ENG)Timing Kit 3-387SGF 1998-1999 REPLACES [3-387SF]; KIT INCLUDES (2) [387], (2)

[189], [S764], [S766], (4) [S790P], [S843], [BT402], [BT403],[BT404], [BT405], [BD393], [BD394], [BG391], [BG392G] (MUSTUSE FINE FINISH CHAIN IN COBRA APPLICATION.)

3-387SHF 1996-1997 REPLACES [3-387SD] AND [3-387SE]; KIT INCLUDES(2) [387], (2) [189], [S764], [S766, (4) [S790], [S843], [BT402],[BT403], [BT404], [BT405], [BD393], [BD394], [BG391], [BG392G]MUST USE FINE FINISH CHAIN IN COBRA APPLICATION

3-387SJF 2001 KIT INCLUDES (2) [387], (2) [189], [S764], [S766], (4)[S790P], [S869], [BT402], [BT403], [BT404], [BT405], [BD393],[BD394], [BG391], [BG392G] (MUST USE FINE FINISH CHAIN INCOBRA APPLICATION.)

Chain 189 1996-1999 44 LINKS SECONDARY (2) REQ.189 2001 44 LINKS SECONDARY (2) REQ.387 1996-1999 116 LINKS PRIMARY (2) REQ.387 2001 116 LINKS PRIMARY (2) REQ.

Cam Thrust Plate Spacer S803SP 1996-1999S803SP 2001

Cam Sprocket S764 1996-1999 42 TEETH LEFT PRIMARYS764 2001 42 TEETH LEFT PRIMARYS766 1996-1999 42 TEETH RIGHT PRIMARYS766 2001 42 TEETH RIGHT PRIMARYS790 1996-1997 20 TEETH SECONDARY R.H. & L.H.; 4 REQ.S790P 1998-1999 20 TEETH SECONDARY (4) REQ. (NOT

INTERCHANGEABLE W/S790)Crank Sprocket S843 1996-1999 21 TEETH 1 PC. DESIGN

S869 2001 21 TEETH 1 PC DESIGN WITH HUB - HUB ACTS ASSPACER


91


44 4.6-V (281) DOHC ENG - 1996-01 - V8 - 3.55 Bore (MUSTANG SVT COBRA) NOT MANUFACTUREDIN 2000 (ROMEO ENG) (Continued)Chain Tensioner 5497B 1996-1999 OE YR3Z-6K282-AA TENSIONER BOLT; MUST BE

USED W/ BD393 & BD3945497B 2001 OE YR3Z-6K282-AA TENSIONER BOLT; MUST BE USED W/

BD393 & BD394BT402 1996-1999 PRIMARY LEFT; NO ADAPTER PLATE REQUIREDBT402 2001 PRIMARY LEFT; NO ADAPTER PLATE REQUIREDBT403 1996-1999 PRIMARY RIGHT; NO ADAPTER PLATE REQUIREDBT403 2001 PRIMARY RIGHT; NO ADAPTER PLATE REQUIREDBT404 1996-1999 SECONDARY LEFTBT404 2001 SECONDARY LEFTBT405 1996-1999 SECONDARY RIGHTBT405 2001 SECONDARY RIGHT

Damper BD393 1996-1999 LEFT HAND ARM; MUST USE W/ 5497B PIVOT BOLT(NOT INCLUDED)

BD393 2001 LEFT HAND ARM; MUST USE W/ 5497B PIVOT BOLT (NOTINCLUDED)

BD394 1996-1999 RIGHT HAND ARM; MUST USE W/ 5497B PIVOTBOLT (NOT INCLUDED)

BD394 2001 RIGHT HAND ARM; MUST USE W/ 5497B PIVOT BOLT(NOT INCLUDED)

Chain Guide BG391 1996-1999 LEFT SECONDARYBG391 2001 LEFT SECONDARYBG392G 1996-1999 RIGHT SECONDARY; TWO MOUNTING BOLTS NOT

SUPPLIED; REPLACES [BG392]BG392G 2001 RIGHT SECONDARY; TWO MOUNTING BOLTS NOT

SUPPLIED; REPLACES [BG392]45 4.6-X (281) SOHC ENG - 1996-04 - V8 - 3.55 Bore (MUSTANG GT, GT BULLITT)

Timing Kit 3-387SA 1996-1998 REPLACES [3-387S] AND [3-387SB]; SILENT CHAINDOES NOT REQUIRE ADAPTER PLATES; KIT INCLUDES (2)387, S766 R.H., S764 L.H., S843 (1PC), BT402 L.H., BT403 R.H.,BD322 R.H., BD321 L.H., BG320 R.H., BG319 L.H SILENT CHAIN(DOES NOT REQUIRE (2) ADAPTER PLATES)

3-387SAX 1996-1998 SILENT CHAIN UPGRADE; KIT INCLUDES (2) 387,BT402 L.H., BT403 R.H., BD322 R.H., BD321 L.H., BG320 R.H.,BG319 L.H., (2) AP275; NOTE: THIS KIT DOES NOT CONTAINSPROCKETS

3-387SC 1999-2004 KIT INCLUDES (2) [387], [BT402], [BT403], [BG333],[BG334], [BD322], [BD321], DOES NOT INCLUDE SPROCKETS

3-387SG 1999-2004 KIT INCLUDES (2) [387], [S766], [S764], [S869],[BG333], [BG334], [BD321], [BD322], [BT402], [BT403] (SILENTCHAIN) (DOES NOT REQUIRE (2) ADAPTER PLATES)

Chain 387 116 LINKS (2) REQ.Cam Thrust Plate Spacer S802SPCam Sprocket S764 1996-2004 42 TEETH LEFT HAND

S766 1996-2004 42 TEETH RIGHT HANDCrank Sprocket S843 1996-2000 21 TEETH (1 PC. DESIGN)

S869 2001-2004 21 TEETH 1 PC. DESIGN WITH HUBChain Tensioner BT402 1996-2004 LEFT HAND

BT403 1996-2004 RIGHT HAND, ADAPTER PLATES NOT REQUIREDDamper BD321 1996-2004 (ARM) LEFT HAND

BD322 1996-2004 (ARM) RIGHT HANDChain Guide BG319 1996-1998 RIGHT HANDContinued on Next Page

92


45 4.6-X (281) SOHC ENG - 1996-04 - V8 - 3.55 Bore (MUSTANG GT, GT BULLITT) (Continued)Chain Guide BG320 1996-1998 LEFT HAND

BG333 1999-2004 RIGHT HAND (SILENT CHAIN)BG334 1999-2004 LEFT HAND (SILENT CHAIN)

46 4.6-V,W,6,9 (281) SOHC ENG - 1992-11 - V8 - 3.55 Bore (CROWN VICTORIA,THUNDERBIRD) 16VROMEO & WINDSOR ENG. GAS,CNG,FLEXTiming Kit 3-387SA 1992-2000 REPLACES [3-387S] AND [3-387SB]; SILENT CHAIN

DOES NOT REQUIRE ADAPTER PLATES; KIT INCLUDES (2)387, S766 R.H., S764 L.H., S843 (1PC), BT402 L.H., BT403 R.H.,BD322 R.H., BD321 L.H., BG320 R.H., BG319 L.H SILENT CHAINUPGRADE; WILL RETROFIT 1992-93 ROLLER CHAIN SYSTEM


3-387SC 2001 To 10/2002 KIT INCLUDES (2) [387], [BT402], [BT403],[BG333], [BG334], [BD322], [BD321], DOES NOT INCLUDESPROCKETS

3-387SG 2001 To 10/2002 KIT INCLUDES (2) [387], [S766], [S764], [S869],[BG333], [BG334], [BD321], [BD322], [BT402], [BT403] SILENTCHAIN; DOES NOT REQUIRE (2) ADAPTER PLATES

3-387SGX FROM 10/2002 TO 2010 SILENT CHAIN; DOES NOT REQUIRE(2) ADAPTER PLATES; KIT INCLUDES (2) [387], [BG333],[BG334], [BD321], [BD322], [BT429], [BT430] (NOTE: DOES NOTINCLUDE SPROCKETS)

3-387SIF From 10/2002 TO 2007 KIT INCLUDES (2) [387], [S766], [S764],[S869], [BG333], [BG334], [BD321], [BD322], [BT429], [BT430]SILENT CHAIN; DOES NOT REQUIRE (2) ADAPTER PLATES

Chain 185 1992-1993 116 LINKS (2) REQUIRED387 1994-2011 116 LINKS (2) REQUIRED

Cam Thrust Plate Spacer S802SP 1994-2008Cam Sprocket S736 1992 42 TEETH L.H.

S740 1992 42 TEETH R.H.S760 1993 42 TEETH L.H.S762 1993 42 TEETH R.H.S764 1994-2011 42 TEETH L.H.S766 1994-2011 42 TEETH R.H.

Crank Sprocket S751 1992 21 TEETH (2) REQUIREDS791 1993 21 TEETH (2) REQUIREDS843 1994-2000 21 TEETH 1 PC. DESIGN; 1 REQUIREDS869 2001-2011 21 TEETH 1 PC. DESIGN WITH HUB

Chain Tensioner BT402 1992 TO 10/2002 L.H.; ADAPTER PLATES NOT REQUIREDAFTER 1995

BT403 1992 To 10/2002 R.H.; ADAPTER PLATES NOT REQUIREDAFTER 1995

BT429 From 10/2002 TO 2011 R.H.BT430 From 10/2002 TO 2011 L.H.

Damper BD321 L.H. TENSIONER ARMBD322 R.H. TENSIONER ARM

Chain Guide BG315 1992 R.H.BG316 1992 L.H.BG319 1993-2000 R.H.BG320 1993-2000 L.H.BG333 2001-2006 R.H. (BOLTS NOT FURNISHED)


93


46 4.6-V,W,6,9 (281) SOHC ENG - 1992-11 - V8 - 3.55 Bore (CROWN VICTORIA,THUNDERBIRD) 16VROMEO & WINDSOR ENG. GAS,CNG,FLEX (Continued)Chain Guide BG334 2001-2011 L.H.Adaptor Plate AP275 1992-1995 (2) REQUIRED

47 4.6-H (281) SOHC ENG - 2005-10 - V8 - 3.55 Bore (2005-10 MUSTANG GT) (2007-08 SHELBY GT)(2008-09 BULLIT) 24V ENGINETiming Kit 3-387SGX SILENT CHAIN; DOES NOT REQUIRE (2) ADAPTER PLATES;

KIT INCLUDES (2) [387], [BG333], [BG334], [BD321], [BD322],[BT429], [BT430] (NOTE: DOES NOT INCLUDE SPROCKETS)

Chain 387 116 LINKS 2 REQUIREDCam Thrust Plate Spacer S802SP 2 REQUIREDCamshaft SprocketActuator

VCTA-1000 MOUNTING BOLT INCLUDED 2 REQ.

Variable Cam TimingSolenoid

VCTS-1000 MOUNTING BOLT AND INSTALLATION GASKET INCLUDED 2REQ.

Crank Sprocket S869 21 TEETH 1 PC DESIGN WITH HUBChain Tensioner BT429 R.H. TENSIONER

BT430 L.H. TENSIONERDamper BD321 L.H. TENSIONER ARM

BD322 R.H. TENSIONER ARMChain Guide BG333 R.H.

BG334 L.H.48 289 OHV ENG - 1963-69 - 8 Cyl. - 4.00 Bore

Cam Thrust Plate MF125 1965-1969 AFTER CHG. L73pc Set 3-356S 1963-1965 INCLUDES [356], [S326] & [S327] TO CHANGE L7;

W/17/32" TOOTH WIDTH3-358S 1965-1969 INCLUDES [358], [S406] & [S431] AFTER CHG. L7;

W/13/32" TOOTH WIDTHChain 356 1963-1965 58 LINKS TO CHANGE L7; W/17/32" TOOTH WIDTH

358 1965-1969 58 LINKS AFTER CHG. L7; W/13/32" TOOTH WIDTHCam Sprocket S326 1963-1965 42 TEETH TO CHANGE L7; W/17/32" TOOTH WIDTH;

OEM #C20Z6268AS406 1965-1969 42 TEETH AFTER CHG. L7; W/13/32" TOOTH WIDTH

Crank Sprocket S327 1963-1965 21 TEETH TO CHANGE L7; W/17/32" TOOTH WIDTHS431 1965-1969 21 TEETH AFTER CHG. L7; W/13/32" TOOTH WIDTH


50 5.0 (302) ENG - 1968-95 - 8 Cyl. - 4.000 BoreCam Thrust Plate MF125 1968 To 3/21/84 EXC. H.O. ENGINES

MF126 From 3/21/84 TO 1995 NOTE: IF USING 3-163SB SET OR S612SPROCKET ON ENGINES BEFORE 3/21/84, YOU MUST USEMF126 (3.356"L) THRUST PLATE RATHER THAN MF125 ORSTOCK (3.882"L) PLATE

3pc Set 3-163SA 1982 INCLUDES [163], [S468] & [S531] H.O. ENGINES ONLY3-163SA 1984 To 3/21/84 INCLUDES [163], [S468] & [S531] H.O. ENGINES

ONLY3-163SB From 3/21/84 To 9/1/88 INCLUDES [163], [S612] & [S531] W/H.O.3-163SB From 9/1/88 TO 1995 INCLUDES [163], [S612] & [S531] FITS ALL3-358S 1968 To 5/2/72 INCLUDES [358], [S406] & [S431] EXC. H.O.3-358SA From 5/2/72 TO 1988 INCLUDES [358], [S430] & [S431] EXC. H.O.


94


50 5.0 (302) ENG - 1968-95 - 8 Cyl. - 4.000 Bore (Continued)3pc Set 3-700SA 1990-1995 INCLUDES [395], [S818], [S819] THUNDERBIRD &

MUSTANG ONLY; SILENT CHAIN; USE AS SET ONLYChain 163 1982 58 LINKS ROLLER TYPE CHAIN; USE WITH H.O. ENGINE

ONLY163 1984 To 9/1/88 58 LINKS ROLLER TYPE CHAIN; USE WITH H.O.

ENGINE ONLY163 From 9/1/88 TO 1995 58 LINKS ROLLER TYPE CHAIN; USE

WITH S612 & S531358 1968 To 9/1/88 58 LINKS EXC. H.O. ENG.395 1990-1995 58 LINKS THUNDERBIRD & MUSTANG ONLY; SILENT

TYPE CHAIN; USE WITH S818 & S819Cam Sprocket S406 1968 To 5/2/72 42 TEETH EXC. H.O.

S430 From 5/2/72 TO 1988 42 TEETH EXC. H.O.S612 From 3/21/84 TO 1985 42 TEETH H.O.S612 1986-1987 42 TEETH MUSTANGS612 1988-1995 42 TEETH FOR USE WITH 163 CHAINS818 1990-1995 42 TEETH FOR USE WITH 370 CHAIN; MUSTANG &

THUNDERBIRDCrank Sprocket S431 1968 To 9/1/88 21 TEETH EXC. H.O. ENG.

S531 1982 21 TEETH H.O. ENGINES ONLYS531 1984 To 9/1/88 21 TEETH H.O. ENGINES ONLYS531 From 9/1/88 TO 1995 21 TEETH FOR USE WITH 163 CHAIN;

FITS ALLS819 1990-1995 21 TEETH THUNDERBIRD & MUSTANG; FOR USE

WITH 370 CHAIN ONLY51 312 ENG - 1956-57 - 8 Cyl. - 3.800 Bore


52 5.4-S (330) DOHC ENG - 2005-12 - V8 - 3.55 Bore (2005-06 FORD GT) (2007-12 MUSTANG SHELBYGT500) 32V SUPERCHARGEDTiming Kit 3-391SE 2005-2006 KIT INCLUDES (2) [391], (2) [189], [S869], (4) [S790P],

[BT404], [BT405], (2) [BT417], [BT429], [BT430], [BG415], [BG416](HUB DESIGN CRANK SPROCKET)

Chain 189 2005-2006 44 LINKS SECONDARY (2) REQ.391 2005-2006 122 LINKS PRIMARY (2) REQ.

Cam Sprocket S790P 2005-2006 20 TEETH SECONDARY (4) REQ.; NOTINTERCHANGEABLE W/S790

Crank Sprocket S869 2005-2006 21 TEETH 1 PC DESIGN WITH HUB; HUB ACTS ASSPACER

Chain Tensioner BT404 2005-2006 SECONDARY LEFT HANDBT405 2005-2006 SECONDARY RIGHT HANDBT417 2005-2006 ARM ASSY; (2) REQ.BT429 2005-2006 PRIMARY; RIGHT HAND; PLASTICBT430 2005-2006 PRIMARY; LEFT HAND; PLASTIC

Chain Guide BG415 2005-2006 LEFT HANDBG416 2005-2006 RIGHT HAND


95


54 5.8 (351C) ENG - 1971-72 - 8 Cyl. - 4.000 Bore (1971-72 MUSTANG BOSS 351,TORINO GT) (1972GRAN TORINO SPORT) (CLEVELAND BOSS)3pc Set 3-494SB INCLUDES [494], [S420] & [S493]Chain 494 48 LINKSCam Sprocket S420 36 TEETHCrank Sprocket S493 18 TEETH

55 5.8-G,H,M (351W) ENG - 1969-91 - 8 Cyl. - 4.00 Bore (WINDSOR) DOES NOT INCLUDE VANS (ENG.NOT PRODUCED IN 1985-86)Cam Thrust Plate MF125 1980-1984 EXC. H.O.

MF126 1980-1984 H.O.MF126 1987-1991 IF USING 3-163SB SET OR S612 SPROCKET ON

NON-H.O. ENGINES BEFORE 1987, YOU MUST USE THE MF126(3.356"L) THRUST PLATE RATHER THAN THE MF125 STOCK(3.882"L) PLATE

3pc Set 3-163SA 1980 To 3/21/84 INCLUDES [163], [S468] & [S531] W/H.O.3-163SB From 3/21/84 TO 1984 INCLUDES [163], [S612] & [S531] W/H.O.3-163SB 1987-1991 INCLUDES [163], [S612] & [S531]3-358S 1969 To 5/2/72 INCLUDES [358], [S406] & [S431]3-358SA From 5/2/72 TO 1985 INCLUDES [358], [S430] & [S431] EXC. H.O.

Chain 163 1980-1984 58 LINKS W/H.O.163 1987-1991 58 LINKS358 1969-1979 58 LINKS358 1980-1984 58 LINKS EXC. H.O.

Cam Sprocket S406 1969 To 5/2/72 42 TEETHS430 From 5/2/72 TO 1984 42 TEETH EXC. H.O.S612 From 3/21/84 TO 1984 42 TEETH W/H.O.S612 1987-1991 42 TEETH

Crank Sprocket S431 1969-1984 21 TEETH EXC. H.O.S531 1980-1984 21 TEETH W/H.O.S531 1987-1991 21 TEETH

56 5.8-H,M,Q (351C) ENG - 1970-74 - 8 Cyl. - 4.000 Bore (CLEVELAND) DOES NOT INCLUDE VANS3pc Set 3-494SB 1970-1972 INCLUDES [494], [S420] & [S493] W/2BC

3-494SB 1970-1973 INCLUDES [494], [S420] & [S493] W/4BC3-498SB 1973-1974 INCLUDES [498], [S436] & [S475] W/2BC

Chain 494 1970-1972 48 LINKS W/2BC494 1970-1973 48 LINKS W/4BC498 1973-1974 48 LINKS W/2BC

Cam Sprocket S420 1970-1972 36 TEETH W/2BCS420 1970-1973 36 TEETH W/4BCS436 1973-1974 36 TEETH W/2BC

Crank Sprocket S475 1973-1974 18 TEETH W/2BCS493 1970-1972 18 TEETH W/2BCS493 1970-1973 18 TEETH W/4BC

57 5.8-Q (351C) COBRA JET ENG - 1971-74 - 8 Cyl. - 4.000 Bore MUSTANG,TORINO,GRAN TORINO(CLEVELAND COBRA JET)3pc Set 3-494SB INCLUDES [494], [S420] & [S493]Chain 494 48 LINKSCam Sprocket S420 36 TEETHCrank Sprocket S493 18 TEETH

58 5.8-H (351M) ENG - 1975-79 - 8 Cyl. - 4.00 Bore (MODIFIED) DOES NOT INCLUDE VANS3pc Set 3-498SB INCLUDES [498], [S436] & [S475]Chain 498 48 LINKSCam Sprocket S436 36 TEETHContinued on Next Page

96


58 5.8-H (351M) ENG - 1975-79 - 8 Cyl. - 4.00 Bore (MODIFIED) DOES NOT INCLUDE VANS(Continued)Crank Sprocket S475 18 TEETH

59 5.8-G (351M) ENG - 1985-86 - 8 Cyl. - 4.00 Bore (MODIFIED) LTD DOES NOT INCLUDE VANS3pc Set 3-163SB INCLUDES [163], [S612] & [S531] W/H.O.

3-358SA INCLUDES [358], [S430] & [S431] W/O H.O.Chain 163 58 LINKS W/POLICE

358 58 LINKS W/O POLICECam Sprocket S430 42 TEETH W/O POLICE

S612 42 TEETH W/POLICECrank Sprocket S431 21 TEETH W/O POLICE

S531 21 TEETH W/POLICE60 5.8-Z (355) DOHC ENG - 2013-14 - 8 Cyl. - 3.68 Bore (SHELBY, SHELBY GT500) 32V

SUPERCHARGEDCam Sprocket S790P 20 TEETH SECONDARY (4) REQUIREDChain Tensioner BT404 SECONDARY; LEFT HAND

BT405 SECONDARY; RIGHT HAND61 352 OHV ENG - 1958-67 - 8 Cyl. - 4.00 Bore

3pc Set 3-169S 1963-1967 INCLUDES [169], [S410] & [S331] HEAVY DUTY3-494SA 1963-1967 INCLUDES [494], [S396] & [S321] STANDARD DUTY



Crank Sprocket S321 18 TEETH STANDARD DUTYS331 1963-1967 24 TEETH HEAVY DUTY

62 361 ENG - 1958-59 - 8 Cyl. - 4.05 Bore (EDSEL)Chain 494 48 LINKSCam Sprocket S284 36 TEETHCrank Sprocket S321 18 TEETH

63 390 ENG - 1961-71 - 8 Cyl. - 4.05 Bore3pc Set 3-169S 1963-1971 INCLUDES [169], [S410] & [S331] HEAVY DUTY


494 48 LINKS STANDARD DUTYCam Sprocket S284 1961-1962 36 TEETH STANDARD DUTY

S396 1963-1971 36 TEETH STANDARD DUTYS410 1963-1971 48 TEETH HEAVY DUTY


64 400 ENG - 1971-78 - 8 Cyl. - 4.000 Bore3pc Set 3-494SB 1971-1972 INCLUDES [494], [S420] & [S493]

3-498SB 1973-1978 INCLUDES [498], [S436] & [S475]Chain 494 1971-1972 48 LINKS



S493 1971-1972 18 TEETH65 406 ENG - 1962-63 - 8 Cyl. - 4.13 Bore (1962 SPEC-W/4BC & 6BC,1963 GALAXIE)

Chain 494 48 LINKSCam Sprocket S284 1962 36 TEETH

97



3-494SA 1964-1968 INCLUDES [494], [S396] & [S321] STANDARD DUTYChain 169 64 LINKS HEAVY DUTY

494 48 LINKS STANDARD DUTYCam Sprocket S410 48 TEETH HEAVY DUTYCrank Sprocket S321 1964-1968 18 TEETH STANDARD DUTY

S331 24 TEETH HEAVY DUTY67 428 ENG - 1966-70 - 8 Cyl. - 4.13 Bore (INCLUDES COBRA JET/SUPER CJ; POLICE)

3pc Set 3-169S INCLUDES [169], [S410] & [S331] HEAVY DUTY3-494SA INCLUDES [494], [S396] & [S321] STANDARD DUTY




68 429 ENG - 1968-73 - 8 Cyl. - 4.360 Bore3pc Set 3-491S 1972-1973 INCLUDES [491], [S420], [S421]

3-491SA 1968-1971 INCLUDES (491] CHAIN, [S420] CAM SPROCKET,[S493] CRANK SPROCKET

Chain 491 52 LINKSCam Sprocket S420 36 TEETHCrank Sprocket S493 1968-1971 18 TEETH

69 430 ENG - 1959-60 - 8 Cyl. - 4.300 BoreChain 491 52 LINKSCrank Sprocket S283 20 TEETH

70 460 ENG - 1972-78 - 8 Cyl. - 4.360 Bore3pc Set 3-491S INCLUDES [491], [S420], [S421] EXC. 1973-74 POLICE

3-491SA 1973-1974 INCLUDES (491] CHAIN, [S420] CAM SPROCKET,[S493] CRANK SPROCKET POLICE

Chain 491 52 LINKSCam Sprocket S420 36 TEETHCrank Sprocket S493 1973-1974 18 TEETH POLICE

FORD INDUSTRIALEngine Year Line Engine Year Line Engine Year Line

4 Cyl.134 1172 DIESEL & GAS 26 Cyl.200 & 200 GP 3223 4240 5

6 Cyl. (Continued)

262 68 Cyl.292 76 Cyl.300 8

8 Cyl.332 9401 10460 11477 12534 13


1 134 ENG - 4 Cyl. - 3 7/16 Bore (E,E134,JE & B8PE ENGS)Gear Set 4710S INCLUDES [4710] & [4701]

2 172 DIESEL & GAS ENG - 4 Cyl. - 3.9 Bore (172,B172,D172 & B8PD ENGS)Gear Set 4710S INCLUDES [4710] & [4701]

3 200 & 200 GP ENG - 6 Cyl. - 3.680 Bore3pc Set 3-351S INCLUDES [351], [S308] & [S397]Chain 351 50 LINKSContinued on Next Page

98

FORD INDUSTRIAL (Continued)LineNo. Part Title Part No Description

3 200 & 200 GP ENG - 6 Cyl. - 3.680 Bore (Continued)Cam Sprocket S308 38 TEETHCrank Sprocket S397 19 TEETH

4 223 ENG - 6 Cyl. - 3.625 Bore3pc Set 3-344S INCLUDES [344], [S249] & [S250]Chain 344 56 LINKSCam Sprocket S249 42 TEETHCrank Sprocket S250 21 TEETH

5 240 ENG - 6 Cyl. - 4.00 BoreGear Set 2764S CAST - REPLACE AS SET ONLY

6 262 ENG - 6 Cyl. - 3 23/32 Bore (G & C1PG ENGS)Crank Gear 2748 42 TEETH H.D.

7 292 ENG - 8 Cyl. - 3 3/4 Bore (K,K292 & B8PK ENGS)3pc Set 3-344S INCLUDES [344], [S249] & [S250]Chain 344 56 LINKSCam Sprocket S249 42 TEETHCrank Sprocket S250 21 TEETH

8 300 ENG - 6 Cyl. - 4.00 BoreGear Set 2764S CAST - REPLACE AS SET ONLY

9 332 ENG - 8 Cyl. - 3.8 Bore (L,L332 & B6PL ENGS)Cam Gear 2733 60 TEETH

10 401 ENG - 8 Cyl. - 4 1/8 Bore (B8PQ & Q ENGS)Crank Gear 2737 55 TEETH

11 460 ENG - 8 Cyl. - 4.360 Bore3pc Set 3-491S INCLUDES [491], [S420], [S421]Chain 491 52 LINKSCam Sprocket S420 36 TEETH

12 477 ENG - 8 Cyl. - 4 1/2 Bore (B8PM & M ENGS)Crank Gear 2737 55 TEETH

13 534 ENG - 8 Cyl. - 4 1/2 Bore (B8PN & N ENGS)Crank Gear 2737 55 TEETH

FORD TRACTOREngine Year Line Engine Year Line Engine Year Line

4 Cyl.120 1939-52 1134 GAS & LPG 1953-64 2

4 Cyl. (Continued)

134 KEROSENE 1953-57 3144 DIESEL 1958-64 4

4 Cyl. (Continued)

172 DIESEL 1958-64 5172 GAS & KEROSENE 1955-64 6


1 120 ENG - 1939-52 - 4 Cyl. - 3 3/16 Bore (MODELS 2N,8N & 9N)Cam Gear 4706 44 TEETH EXC. 1939-41 9N

2 134 GAS & LPG ENG - 1953-64 - 4 Cyl. - 3 7/16 Bore (MODELSNAA,501,600,601,700,701,2030,2031,2110, 2111,2120,2130 & 2131)Gear Set 4710S INCLUDES [4710] & [4701]

3 134 KEROSENE ENG - 1953-57 - 4 Cyl. - 3 7/16 Bore (MODELS NAA,600 & 700)Gear Set 4710S INCLUDES [4710] & [4701]

4 144 DIESEL ENG - 1958-64 - 4 Cyl. - 3 9/16 Bore (MODELS 501,AFTER SER#153775,601,701,2030,2031,211 2111,2120,2130 & 2131)Gear Set 4710S INCLUDES [4710] & [4701]

99

FORD TRACTOR (Continued)LineNo. Part Title Part No Description

5 172 DIESEL ENG - 1958-64 - 4 Cyl. - 3.9 Bore (MODELS801,901,1801,4000,4030,4031,4040,4110,4120, 4121,4130,4131 & 4140)Gear Set 4710S INCLUDES [4710] & [4701]

6 172 GAS & KEROSENE ENG - 1955-64 - 4 Cyl. - 3.9 Bore (MODELS 800,801,900,901,1801,4000,4030,4031,4040,4110,4120,4121,4130,4131)Gear Set 4710S INCLUDES [4710] & [4701]

FORD TRUCKEngine Year Line Engine Year Line Engine Year Line

4 Cyl.1.8 (110) SOHC 1972-78 12.0 (122) OHC 1979-82 22.0-B (121) DOHC 2001-04 32.0 (122) SOHC 1983-88 42.0 (121) DOHC 2004-08 52.3 (140) SOHC 1977-82 62.3-E (140) DIESEL 1985-87 72.3 (140) SOHC 1983-97 82.3-D,H,Z (140) DOHC 2001-12 96 Cyl.144 1960-64 104 Cyl.2.5-C (153) SOHC 1998-01 116 Cyl.170 1964-72 122.8-S (171) 1983-85 132.9-T (177) 1986-92 143.0 (182) OHV 1986-08 153.0-1,G (182) DOHC 2001-12 163.3-T (200) 1963-74 16215 1951-53 17223 1954-64 183.8-3 (232) 1982-83 193.8 (232) 1995-03 208 Cyl.239 1946-53 21239 1954-55 226 Cyl.240 OHV 1965-74 23

6 Cyl. (Continued)

4.0-E,K (245) SOHC 1997-11 244.0-X (245) OHV 1990-00 258 Cyl.4.2-D (255) 1981-82 26256 1954-55 276 Cyl.4.2-2 (256) OHV 1997-08 288 Cyl.260 1962-64 296 Cyl.262 1961-64 308 Cyl.272 1956-57 314.6-6 (281) SOHC 1997-03 324.6-W (281) SOHC 1997-13 334.6-8 (281) SOHC 2006-10 34289 1964-68 35292 1958-64 366 Cyl.4.9 (300) 1965-96 378 Cyl.302 1956-63 385.0 (302) OHV 1968-01 39330 HD 1964-78 40330 1964-77 415.4 (330) SOHC 1997-14 425.4-5,V (330) SOHC 2004-14 43332 1956-63 44332 ENG 1960-63 45

8 Cyl. (Continued)

5.8 (351C) 1970-74 465.8 (351M) 1977-81 475.8-G,H,M (351W) 1969-85 485.8-R (351W) 1993-95 495.8-H (351) 1984-97 50352 1965-67 51359 1974-78 52360 1968-76 53361 1964-78 546.1 (370) 1980-91 556.4 (389) 1975-78 566.4-H,M (390) 1968-76 57391 1964-78 586.6-S,Z (400) 1977-82 59401 1958-76 6010 Cyl.6.8-S (415) SOHC 1997-13 616.8-Y (415) SOHC 2005-13 628 Cyl.6.9 (420) DIESEL 1983-87 637.0 (428) 1968-69 647.0 (429) 1970-73 657.0 (429) 1980-98 667.3 (445) DIESEL 1988-03 677.5 (460) 1973-97 68475 1973-79 69477 1958-81 70534 1958-81 71


1 1.8 (110) SOHC ENG - 1972-78 - 4 Cyl. - 3.07 Bore (COURIER 1797CC) MAZDA ENG.Chain 172 46 LINKS OIL PUMP

3DR106 106 LINKS CAMSHAFTCam Sprocket S450 1972-1976 38 TEETH

S456 1977-1978 38 TEETHCrank Sprocket S449 19 TEETH INNER

S451 19 TEETH OUTERChain Tensioner BT46Damper BD40 RIGHT

BD74 LEFT2 2.0 (122) OHC ENG - 1979-82 - 4 Cyl. - 3.45 Bore (COURIER) MAZDA ENG.

Timing Kit 3DR106-3 1979 To 7/1/80 KIT INCLUDES [3DR106], [172], [S456], [S449],[S451], [BT47], [BD40] & [BD74]


100

FORD TRUCK (Continued)LineNo. Part Title Part No Description

2 2.0 (122) OHC ENG - 1979-82 - 4 Cyl. - 3.45 Bore (COURIER) MAZDA ENG. (Continued)Chain 172 1979 To 7/1/79 46 LINKS OIL PUMP

3DR106 106 LINKS CAMSHAFT8MMSR54 From 7/1/80 TO 1980 54 LINKS OIL PUMP

Cam Sprocket S456 38 TEETHCrank Sprocket S449 19 TEETH INNER

S451 1979 19 TEETH OUTERS453 1980-1982 19 TEETH OUTER

Chain Tensioner BT47Damper BD40 1979 To 7/1/80 RIGHT HAND

BD74 LEFT HAND3 2.0-B (121) DOHC ENG - 2001-04 - 4 Cyl. - 3.34 Bore (ESCAPE LIMITED,XLS,XLT) ZTEC

Belt B-0294 129 TEETH4 2.0 (122) SOHC ENG - 1983-88 - 4 Cyl. - 3.525 Bore (RANGER)

Belt B-014 129 TEETHCam Sprocket S446 38 TEETHCrank Sprocket S447 19 TEETHTiming Cover MIC100 INNER

5 2.0 (121) DOHC ENG - 2004-08 - 4 Cyl. - 3.44 Bore (ECO SPORT) MEXICO ONLY DURATECTiming Kit 3-727S INCLUDES [727F], [706F], (2) [S898], [S891], [S893], [BT452],

[BT5514], [BT5555], [BG449], [BG5556]Chain 706F 54 LINKS OIL PUMP CHAIN

727F 134 LINKS TIMING CHAINCam Sprocket S898 2 REQ.Crank Sprocket S891Oil Pump Sprocket S893 24 TEETHChain Tensioner BT452 OIL PUMP CHAIN TENSIONER

BT5514 TIMING CHAIN TENSIONER; RIGHT UPPERBT5555 TIMING CHAIN TENSIONER ARM

Chain Guide BG449 OIL PUMP CHAIN GUIDEBG5556 TIMING CHAIN GUIDE; LEFT UPPER

6 2.3 (140) SOHC ENG - 1977-82 - 4 Cyl. - 3.44 Bore (COURIER)Belt B-014 129 TEETHCam Sprocket S446 38 TEETHCrank Sprocket S447 19 TEETH

7 2.3-E (140) DIESEL ENG - 1985-87 - 4 Cyl. - (OHC)Belt B-091 163 TEETH CAMSHAFT

B-092 83 TEETH BAL. SHAFTCam Sprocket S8004 48 TEETHCrank Sprocket S8005 24 TEETH TIMING

S8007 32 TEETH BAL. SHAFT8 2.3 (140) SOHC ENG - 1983-97 - 4 Cyl. - 3.78 Bore (RANGER 1983-97 & AEROSTAR 1986-87)

Belt B-014 1983 To 1/13/92 129 TEETHB-0210 From 1/14/92 TO 1994 129 TEETHB-0276 1995-1997 131 TEETH

Cam Sprocket S446 1983 To 1/13/92 38 TEETHS816 1992-1994 38 TEETH

Crank Sprocket S447 1983 To 1/13/92 19 TEETHS813 1992-1997 19 TEETH

Timing Cover MIC100 1983-1989 INNER

101


9 2.3-D,H,Z (140) DOHC ENG - 2001-12 - 4 Cyl. - 3.44 Bore (RANGER 2001-12) (ESCAPE,ESCAPEHYBRID 2005-08) DURATECTiming Kit 3-705S KIT INCLUDES [705], [706F], (2) [S898], [S891], [S893], [BT5513],

[BT5514], [BT452], [BG449], [BG5515] (KIT INCLUDES OIL PUMPCHAIN GUIDE) RWD RANGER ONLY; NORTH/SOUTHCONFIGURATION 8MM PITCH NON-VVT

3-705SX KIT INCLUDES [705], [706F], [BT5513], [BT5514], [BT452],[BG449], [BG5515] (KIT INCLUDES OIL PUMP CHAIN GUIDE,DOES NOT INCLUDE SPROCKETS) RWD RANGER ONLY;NORTH/SOUTH CONFIGURATION 8MM PITCH NON-VVT

Chain 705 138 LINKS RANGER, 2005-06 ESCAPE; PRIMARY CHAIN706F 54 LINKS RANGER ONLY; OIL PUMP CHAIN

Cam Sprocket S898 RANGER; 2 REQ.Crank Sprocket S891 RANGER ONLYOil Pump Sprocket S893 24 TEETH RANGER ONLYChain Tensioner BT452 RANGER ONLY; OIL PUMP CHAIN

BT5513 RANGER ONLY; TENSIONER ARMBT5514 RANGER ONLY; RIGHT UPPER, PRIMARY CHAIN TENSIONER

Chain Guide BG449 RANGER ONLY; OIL PUMP CHAINBG5515 RANGER ONLY; CAMSHAFT CHAIN

10 144 ENG - 1960-64 - 6 Cyl. - 3 1/2 Bore (BUS,PICK UP,RANCHERO,SEDAN DELIVERY)Cam Thrust Plate MF1083pc Set 3-351S INCLUDES [351], [S308] & [S397]Chain 351 50 LINKSCam Sprocket S308 38 TEETHCrank Sprocket S397 19 TEETH

11 2.5-C (153) SOHC ENG - 1998-01 - 4 Cyl. - 3.78 Bore (RANGER)Belt B-0276 131 TEETH

12 170 ENG - 1964-72 - 6 Cyl. - 3.50 Bore (BRONCO,RANCHERO,FALCON DELIVERY VAN)Cam Thrust Plate MF1083pc Set 3-351S INCLUDES [351], [S308] & [S397]Chain 351 50 LINKSCam Sprocket S308 38 TEETHCrank Sprocket S397 19 TEETH

13 2.8-S (171) ENG - 1983-86 - V6 - 3.66 Bore (RANGER,BRONCO & AEROSTAR)Gear Set 2760SA REPLACE AS A SET ONLY

14 2.9-T (177) ENG - 1986-92 - V6 - 3.6619 Bore (BRONCO & RANGER)Timing Kit 3-3SR60AS KIT INCLUDES [3SR60], [S650], [S651], [BT157], [BG187]3pc Set 3-3SR60 INCLUDES [3SR60], [S650] & [S651]Chain 3SR60 60 LINKSCam Sprocket S650 38 TEETHCrank Sprocket S651 19 TEETHChain Tensioner BT157Chain Guide BG187

15 3.0 (182) OHV ENG - 1986-08 - V6 - 3.500 Bore (1990-08 RANGER)(1986-97 AEROSTAR)(1995-00WINDSTAR)3pc Set 3-374S 1986-1998 INCLUDES [374], [S636] & [S649]



S856 1999-2008 38 TEETHCrank Sprocket S649 1986-1998 19 TEETHContinued on Next Page

102


15 3.0 (182) OHV ENG - 1986-08 - V6 - 3.500 Bore (1990-08 RANGER)(1986-97 AEROSTAR)(1995-00WINDSTAR) (Continued)Crank Sprocket S859 1999-2008 19 TEETH

16 3.3-T (200) ENG - 1963-74 - 6 Cyl. - 3.68 Bore (1973-74 BRONCO, 1963-65 FALCON DELIVERYSEDAN, 1964-68 RANCHERO)Cam Thrust Plate MF1083pc Set 3-351S INCLUDES [351], [S308] & [S397]Chain 351 50 LINKSCam Sprocket S308 38 TEETHCrank Sprocket S397 19 TEETH

17 215 ENG - 1951-53 - 6 Cyl. - 3.56 Bore (F SERIES, F-100 PICKUP-F350 PICKUP, P-350 VAN,COURIER SEDAN) INCLUDES VANS3pc Set 3-344S INCLUDES [344], [S249] & [S250]Chain 344 56 LINKSCam Sprocket S249 42 TEETHCrank Sprocket S250 21 TEETH

18 223 ENG - 1954-64 - 6 Cyl. - 3 5/8 Bore (F100-600,B500-600, P350-500)3pc Set 3-344S INCLUDES [344], [S249] & [S250]Chain 344 56 LINKSCam Sprocket S249 42 TEETHCrank Sprocket S250 21 TEETH

19 3.8-3 (232) ENG - 1982-83 - V6 - 3.81 Bore (F-100)3pc Set 3-365SA INCLUDES [365], [S542] & [S539]Chain 365 60 LINKSCam Button CB200Cam Sprocket S542 42 TEETHCrank Sprocket S539 21 TEETH

20 3.8 (232) ENG - 1995-03 - V6 - 3.81 Bore (WINDSTAR)3pc Set 3-376S INCLUDES [376], [S700] & [S539]Chain 376 60 LINKSCam Sprocket S700 42 TEETHCrank Sprocket S539 21 TEETHChain Tensioner BT323 1995-1999

21 239 ENG - 1946-53 - 8 Cyl. - 3 3/16 BoreGear Set 2727S 1949-1953 INCLUDES [2702] & [2701]Cam Gear 2702 1949-1953 44 TEETH ALUM

4706 1946-1948 44 TEETH ALUM.Crank Gear 2701 1949-1953 22 TEETH

22 239 ENG - 1954-55 - 8 Cyl. - 3 1/2 Bore (F100-600,P350,B500- 600)3pc Set 3-344S INCLUDES [344], [S249] & [S250]Chain 344 56 LINKSCam Sprocket S249 42 TEETHCrank Sprocket S250 21 TEETH

23 240 OHV ENG - 1965-74 - 6 Cyl. - 4.00 Bore (BRONCO,E-100,200,300 ECONOLINE,F-100,250,350SERIES P.U.,P-100,200)Gear Set 2750AS ALUMINUM; REPLACE AS SET ONLY; STANDARD DUTY

2764S CAST IRON; REPLACE AS A SET ONLY2766AS ALUMINUM; REPLACE AS SET ONLY; HEAVY DUTY2766S INCLUDES [2766] & [2765] FIBER; REPLACE AS SET ONLY

103


24 4.0-E,K (245) SOHC ENG - 1997-11 - V6 - 3.95 Bore (1997-10 EXPLORER & 2001-11 RANGER) GAS& FLEX FUELTiming Kit 3-398S 1997-2010 KIT INCLUDES (3) TIMING CHAINS, (1) B. SHAFT

CHAIN, (2) CAM SPROCKETS, (2) JACKSHAFT SPROCKETS, (3)TENSIONERS, (1) TENSIONER RESERVOIR, (3) GUIDES, (2)WASHERS. SOLD AS KIT ONLY; ENTIRE KIT MUST BEREPLACED DUE TO OE UPGRADES TO THE COMPONENTS.A.W.D. OR 4.W.D. ONLY; ENGINES WITH BALANCE SHAFT

3-398SA 1997-2010 KIT INCLUDES (3) TIMING CHAINS, (2) CAMSPROCKETS, (2) JACKSHAFT SPROCKETS, (2) TENSIONERS,(6) GUIDES, (2) WASHERS. SOLD AS KIT ONLY; ENTIRE KITMUST BE REPLACED DUE TO OE UPGRADES TO THECOMPONENTS. R.W.D. ONLY; ENGINES W/OUT BALANCESHAFT

Balance Shaft Sprocket S875 1997-2010 21 TEETHChain Tensioner BT429 2002-2010 RIGHT HAND

25 4.0-X (245) OHV ENG - 1990-00 - V6 - 3.95 Bore (AEROSTAR, EXPLORER & RANGER)Timing Kit 3-3SRH64AS 1995-2000 KIT INCLUDES [3SRH64], [S650], [S821], [BT345],

[BG261]3-3SRH64S 1990-1994 KIT INCLUDES [3SRH64], [S650], [S651], [BT157] &

[BG261]3pc Set 3-3SRH64 1990-1994 INCLUDES [3SRH64], [S650] & [S651]

3-3SRH64A 1995-2000 INCLUDES [3SRH64], [S650] & [S821]Chain 3SRH64 64 LINKSCam Sprocket S650 38 TEETHCrank Sprocket S651 1990-1994 19 TEETH


BT345 1995-2000Chain Guide BG261

26 4.2-D (255) ENG - 1981-82 - 8 Cyl. - 3.68 Bore (100-350)Cam Thrust Plate MF1253pc Set 3-358SA INCLUDES [358], [S430] & [S431]Chain 358 58 LINKSCam Sprocket S430 42 TEETHCrank Sprocket S431 21 TEETH

27 256 ENG - 1954-55 - 8 Cyl. - 3 5/8 Bore (B600-700 SCHOOL BUS,C600-700 COE,F600-700,T700)3pc Set 3-344S INCLUDES [344], [S249] & [S250]Chain 344 56 LINKSCam Sprocket S249 42 TEETHCrank Sprocket S250 21 TEETH

28 4.2-2 (256) OHV ENG - 1997-08 - V6 - 3.81 Bore (E SERIES, F SERIES, FREESTAR) INCLUDESVANS3pc Set 3-376S INCLUDES [376], [S700] & [S539]Chain 376 60 LINKSCam Sprocket S700 42 TEETHCrank Sprocket S539 21 TEETHChain Tensioner BT323

29 260 ENG - 1962-64 - 8 Cyl. - 3.80 Bore (RANCHERO, FALCON DELIVERY SEDAN)3pc Set 3-356S INCLUDES [356], [S326] & [S327]Chain 356 58 LINKSCam Sprocket S326 42 TEETHCrank Sprocket S327 21 TEETH

104


30 262 ENG - 1961-64 - 6 Cyl. - 3.72 Bore (F100,F250,F350 PICKUP)Crank Gear 2748 1964 42 TEETH HEAVY DUTY

31 272 ENG - 1956-57 - 8 Cyl. - 3 5/8 Bore (F100-F700,P350-P500,B500-B700)3pc Set 3-344S INCLUDES [344], [S249] & [S250]Chain 161 56 LINKS H.D.

344 56 LINKSCam Sprocket S249 42 TEETHCrank Sprocket S250 21 TEETH

32 4.6-6 (281) SOHC ENG - 1997-03 - 8 Cyl. - 3.55 Bore (E SERIES 1997-98, EXPEDITION 1997-00, FSERIES 1997-03) (WINDSOR ENG)Timing Kit 3-387SC 1997 To 10/2002 KIT INCLUDES (2) [387], [BT402], [BT403],

[BG333], [BG334], [BD322], [BD321], DOES NOT INCLUDESPROCKETS

3-387SG 1997 To 10/02 KIT INCLUDES (2) [387], [S766], [S764], [S869],[BG333], [BG334], [BD321], [BD322], [BT402], [BT403]

3-387SGX From 10/02 TO 2003 SILENT CHAIN; DOES NOT REQUIRE (2)ADAPTER PLATES; KIT INCLUDES (2) [387], [BG333], [BG334],[BD321], [BD322], [BT429], [BT430] (NOTE: DOES NOT INCLUDESPROCKETS)

3-387SIF From 10/2002 TO 2003 KIT INCLUDES (2) [387], [S766], [S764],[S869], [BG333], [BG334], [BD321], [BD322], [BT429], [BT430]

Chain 387 116 LINKS (2) REQ.Cam Thrust Plate Spacer S802SP 2002Cam Sprocket S764 2000-2003 42 TEETH L.H.

S766 2000-2003 42 TEETH R.H.Crank Sprocket S843 1997-2000 21 TEETH (1 PC. DESIGN)

S869 2002-2003 21 TEETH ONE PIECE WITH HUB - HUB ACTS ASSPACER

Chain Tensioner BT402 1997 To 10/02 LEFT HAND, ADAPTER PLATES NOT REQUIREDBT403 1997 To 10/02 RIGHT HAND, ADAPTER PLATES NOT REQUIRED

AFTER 1995BT429 From 10/02 TO 2003 RIGHT HANDBT430 From 10/02 TO 2003 LEFT HAND

Damper BD321 (ARM) LEFT HANDBD322 (ARM) RIGHT HAND

Chain Guide BG333 RIGHT HANDBG334 LEFT HAND

33 4.6-W (281) SOHC ENG - 1997-13 - 8 Cyl. - 3.55 Bore (E SERIES,FSERIES,EXPEDITION,EXPLORER) (INCLUDES VANS) 16V GAS/FLEX ROMEO ENGTiming Kit 3-387SA 1997-2000 REPLACES [3-387S] AND [3-387SB]; SILENT CHAIN

DOES NOT REQUIRE ADAPTER PLATES; KIT INCLUDES (2)387, S766 R.H., S764 L.H., S843 (1PC), BT402 L.H., BT403 R.H.,BD322 R.H., BD321 L.H., BG320 R.H., BG319 L.H


3-387SC 2001 To 10/2002 KIT INCLUDES (2) [387], [BT402], [BT403],[BG333], [BG334], [BD322], [BD321], DOES NOT INCLUDESPROCKETS

3-387SG 2001 To 10/2002 KIT INCLUDES (2) [387], [S766], [S764], [S869],[BG333], [BG334], [BD321], [BD322], [BT402], [BT403] (WINDSORSTYLE GUIDES - ROMEO PLANT)


105


33 4.6-W (281) SOHC ENG - 1997-13 - 8 Cyl. - 3.55 Bore (E SERIES,FSERIES,EXPEDITION,EXPLORER) (INCLUDES VANS) 16V GAS/FLEX ROMEO ENG (Continued)Timing Kit 3-387SGX FROM 10/2002 TO 2008 SILENT CHAIN; DOES NOT REQUIRE

(2) ADAPTER PLATES; KIT INCLUDES (2) [387], [BG333],[BG334], [BD321], [BD322], [BT429], [BT430] (NOTE: DOES NOTINCLUDE SPROCKETS) PLASTIC TENSIONER DESIGN

3-387SIF From 10/2002 TO 2007 KIT INCLUDES (2) [387], [S766], [S764],[S869], [BG333], [BG334], [BD321], [BD322], [BT429], [BT430]PLASTIC TENSIONER DESIGN

Chain 387 1997-2008 116 LINKS (2) REQ.Cam Thrust Plate Spacer S802SP 2001-2007Cam Sprocket S764 1997-2007 42 TEETH LEFT HAND

S766 1997-2007 42 TEETH RIGHT HANDCrank Sprocket S843 1997-2000 21 TEETH 1 PC. DESIGN

S869 2001-2007 21 TEETH ONE PIECE WITH HUB - HUB ACTS ASSPACER

Chain Tensioner BT402 1997 To 10/2002 LEFT HAND, ADAPTER PLATES NOT REQUIREDBT403 1997 To 10/2002 RIGHT HANDBT429 From 10/2002 TO 2008 RIGHT HANDBT430 From 10/2002 TO 2008 LEFT HAND, ADAPTER PLATES NOT

REQUIREDDamper BD321 1997-2008 LEFT HAND TENSIONER ARM

BD322 1997-2008 RIGHT HAND TENSIONER ARMChain Guide BG319 1997-2000 RIGHT HAND

BG320 1997-2000 LEFT HANDBG333 2001-2008 RIGHT HAND (WINDSOR STYLE GUIDE)BG334 2001-2008 LEFT HAND (WINDSOR STYLE GUIDE)

34 4.6-8 (281) SOHC ENG - 2006-10 - 8 Cyl. - 3.55 Bore (2006-10 EXPLORER, 2007-10 EXPLORERSPORT TRAC, 2009-10 F150) 24 VALVETiming Kit 3-387SGX SILENT CHAIN; DOES NOT REQUIRE (2) ADAPTER PLATES;

KIT INCLUDES (2) [387], [BG333], [BG334], [BD321], [BD322],[BT429], [BT430] (NOTE: DOES NOT INCLUDE SPROCKETS)

Chain 387 116 LINKS 2 REQ.Camshaft SprocketActuator




Crank Sprocket S869 21 TEETHChain Tensioner BT429 RIGHT HAND

BT430 LEFT HANDDamper BD321 LEFT HAND; ARM

BD322 RIGHT HAND; ARMChain Guide BG333 RIGHT HAND

BG334 LEFT HAND35 289 ENG - 1964-68 - 8 Cyl. - 4.00 Bore (BRONCO,FALCON DELIVERY SEDAN,RANCHERO)


106


36 292 ENG - 1958-64 - 8 Cyl. - 3.75 Bore (COURIER DELIVERY, F-100-350, P-350, RANCHERO)INCLUDES VANS3pc Set 3-344S INCLUDES [344], [S249] & [S250] W/STANDARD DUTY CHAINChain 161 56 LINKS HEAVY DUTY

344 56 LINKS STANDARD DUTYCam Sprocket S249 42 TEETHCrank Sprocket S250 21 TEETH

37 4.9 (300) ENG - 1965-96 - 6 Cyl. - 4.00 Bore (E,F,P SERIES 100-500 & BRONCO) CARB,F.I.Gear Set 2750AS ALUMINUM - REPLACE AS SET ONLY; STANDARD DUTY

2764S CAST IRON - REPLACE AS SET ONLY2766AS ALUMINUM - REPLACE AS SET ONLY. HEAVY DUTY2766S INCLUDES [2766] & [2765] FIBER - REPLACE AS SET ONLY

38 302 ENG - 1956-63 - 8 Cyl. - 3 5/8 Bore (B700-750 BUS,C700- 750,C.O.E. 800,F700-800,T700-800,6WHEEL)Cam Gear 2733 60 TEETH

39 5.0 (302) OHV ENG - 1968-01 - 8 Cyl. - 4.00 Bore (SERIES 100-500,BRONCO,EXPLORER,RANCHERO)Cam Thrust Plate MF125 1968 To 3/21/84

MF126 From 3/21/84 To 9/1/88 NOTE: IF USING 3-163SB SET OR S612SPROCKET ON ENGINES BEFORE 3/21/84, YOU MUST USEMF126 (3.356"L) THRUST PLATE RATHER THAN MF125 ORSTOCK (3.882"L) PLATE

3pc Set 3-163SB From 9/1/87 TO 2000 INCLUDES [163], [S612] & [S531] ROLLERTYPE CHAIN; USE AS COMPLETE SET ONLY

3-358S 1968 To 5/2/72 INCLUDES [358], [S406] & [S431]3-358SA From 5/2/72 TO 1987 INCLUDES [358], [S430] & [S431]3-700SA 1990-2001 INCLUDES [395], [S818], [S819] SILENT TYPE CHAIN;

USE AS COMPLETE SET ONLYChain 163 From 9/1/87 TO 2000 58 LINKS ROLLER CHAIN; FOR USE W/

S531 & S612358 1968 To 9/1/87 58 LINKS395 1990-2001 58 LINKS SILENT TYPE CHAIN; FOR USE W/ S818 &

S819Cam Sprocket S406 1968 To 5/2/72 42 TEETH

S430 From 5/2/72 To 9/1/87 42 TEETHS612 From 9/1/87 TO 2000 42 TEETH MUST BE USED W/ 163 CHAINS818 1990-2001 42 TEETH MUST BE USED W/ 370 CHAIN

Crank Sprocket S431 1968 To 9/1/87 21 TEETH MUST BE USED W/ 358 CHAIN; OILSLINGER NOT REQUIRED

S531 From 9/1/87 TO 2000 21 TEETH MUST BE USED W/ 163 CHAINS819 1990-2001 21 TEETH MUST BE USED W/ 370 CHAIN

40 330 HD ENG - 1964-78 - 8 Cyl. - 3 7/8 Bore (SERIES 600-700)3pc Set 3-169SA INCLUDES [169], [S410] & [S353]Chain 169 64 LINKSCam Sprocket S410 48 TEETH

41 330 ENG - 1964-77 - 8 Cyl. - 3.55 Bore (SERIES 100-500)3pc Set 3-169S INCLUDES [169], [S410] & [S331]Chain 169 64 LINKSCam Sprocket S410 48 TEETHCrank Sprocket S331 24 TEETH

107


42 5.4-3,L,M,Z (330) SOHC ENG - 1997-14 - 8 Cyl. - 3.55 Bore (INCLUDES 1999-03 SUPERCHARGED)(16 VALVE)Timing Kit 3-391S 1997-2000 KIT INCLUDES (2) [391], [S843], [BT402], [BT403],

[BT411], [BT412], [BG413], [BG414] KIT DOES NOT INCLUDECAM SPROCKETS

3-391SC 2002-2013 KIT INCLUDES (2) [391], [S869], [BT429], [BT430],[BT411], [BT412], [BG413], [BG414], KIT DOES NOT INCLUDECAM SPROCKETS

3-391SD 2002-2008 KIT INCLUDES (2) [391], [S764], [S766], [S869],[BT429], [BT430], [BT411], BT412], [BG413], [BG414] INCLUDESCAM SPROCKETS FOR NON INTEGRATED CAM SPROCKETENGINES

Chain 391 1997-2013 122 LINKS 2 REQ.Cam Sprocket S764 1997-2008 42 TEETH L.H.; EXC. F150,F250 & 2004 EXPEDITION

S764 1999-2004 42 TEETH L.H. F150,F250S766 1997-2012 42 TEETH R.H.; EXC. F150,F250S766 1999-2004 42 TEETH R.H.; F150,F250

Crank Sprocket S843 1997-2000 21 TEETH 1 PC. DESIGNS869 2001-2013 21 TEETH 1 PC. DESIGN WITH HUB; HUB ACTS AS

SPACERChain Tensioner BT402 1997-2001 L.H. TENSIONER, ADAPTER PLATES NOT REQUIRED

BT403 1997-2001 R.H. TENSIONER, ADAPTER PLATES NOT REQUIREDBT411 1997-2013 L.H. TENSIONER ARMBT412 1997-2013 R.H. TENSIONER ARMBT429 2002-2013 R.H. TENSIONERBT430 2002-2013 L.H. TENSIONER

Chain Guide BG413 1997-2013 L.H. W/GUIDE RAILBG414 1997-2013 USE LONGER TOP BOLT; FORD OE [W709818-S437]

(NOT SUPPLIED) R.H.43 5.4-5,V (330) SOHC ENG - 2004-14 - 8Cyl. - 3.55 Bore (EXPEDITION,F150,F250 S.D.,F350 S.D.)

(LOBO - MEXICO) (24 VALVE) TRITONTiming Kit 3-391SC 2004-2013 KIT INCLUDES (2) [391], [S869], [BT429], [BT430],

[BT411], [BT412], [BG413], [BG414], KIT DOES NOT INCLUDECAM SPROCKETS

Chain 391 2004-2013 122 LINKS 2 REQ.Camshaft SprocketActuator

VCTA-1000 2004-2012 MOUNTING BOLT INCLUDED 2 REQ.


VCTS-1000 2004-2013 MOUNTING BOLT AND INSTALLATION GASKETINCLUDED 2 REQ.

Variable Cam TimingHousing

VCTH-1000L 2004-2012 INCLUDES VARIABLE CAM SOLENOID & MOUNTINGGASKET LEFT HAND

VCTH-1000R 2004-2012 INCLUDES VARIABLE CAM SOLENOID & MOUNTINGGASKET RIGHT HAND

Crank Sprocket S869 2004-2013 21 TEETHChain Tensioner BT411 2004-2013 L.H. TENSIONER ARM

BT412 2004-2013 R.H. TENSIONER ARMBT429 2004-2013 R.H. TENSIONERBT430 2004-2013 L.H. TENSIONER

Chain Guide BG413 2004-2013 L.H.; GUIDE W/RAILBG414 2004-2013 USE LONGER TOP BOLT; FORD OE [W709818-S437]

(NOT SUPPLIED) R.H.

108


44 332 ENG - 1956-63 - 8 Cyl. - 3.8 Bore (B700-750,C700-900,TILT CAB, F700-900,T700-800,6 WHEEL)MEDIUM DUTYCam Gear 2733 60 TEETH

45 332 ENG - 1960-63 - 8 Cyl. - 4.00 Bore (F-100 PICKUP,F-250 PICKUP,F-350 PICKUP) STANDARDDUTYCam Gear 2733 60 TEETH

46 5.8 (351C) ENG - 1970-74 - 8 Cyl. - 4.00 Bore RANCHERO, GT VIN CODES H,M,Q,R (CLEVELAND)3pc Set 3-494SB 1970-1972 INCLUDES [494], [S420] & [S493] W/2BC

3-494SB 1970-1974 INCLUDES [494], [S420] & [S493] W/4BC3-498SB 1973-1974 INCLUDES [498], [S436] & [S475] W/2BC

Chain 494 1970-1972 48 LINKS W/2BC494 1970-1974 48 LINKS W/4BC498 1973-1974 48 LINKS W/2BC

Cam Sprocket S420 1970-1972 36 TEETH W/2BCS420 1970-1974 36 TEETH W/4BC


47 5.8 (351M) ENG - 1977-81 - 8 Cyl. - 4.00 Bore VIN CODE "G" 1980-81, "H" 1975-79 (MODIFIED)3pc Set 3-494SB INCLUDES [494], [S420] & [S493]Chain 494 48 LINKSCam Sprocket S420 36 TEETHCrank Sprocket S493 18 TEETH

48 5.8-G,H,M (351W) ENG - 1969-85 - 8 Cyl. - 4.00 Bore SERIES 100-500, RANCHERO, BRONCO,INCLUDES VANS (WINDSOR)Cam Thrust Plate MF125 1975 To 12/10/84

MF126 1984-1985 NOTE: IF USING [3-163SB] SET OR [S612]SPROCKET ON ENGINES BEFORE 12/10/84, YOU MUST USE[MF126] (3.356"L) THRUST PLATE RATHER THAN [MF125] ORSTOCK (3.882"L) PLATE

3pc Set 3-358SA From 5/2/72 TO 1985 INCLUDES [358], [S430] & [S431] W/2BCChain 358 58 LINKS W/2BCCam Sprocket S430 From 5/27/1972 TO 1985 42 TEETH W/2BCCrank Sprocket S431 21 TEETH W/2BC

49 5.8-R (351W) ENG - 1993-95 - 8 Cyl. - 4.00 Bore F150 LIGHTNING (WINDSOR)Cam Thrust Plate MF1263pc Set 3-163SB INCLUDES [163], [S612] & [S531] WITH ROLLER TYPE CHAINChain 163 58 LINKS ROLLER TYPE CHAINCam Sprocket S612 42 TEETHCrank Sprocket S531 21 TEETH

50 5.8-H (351W) ENG - 1984-97 - 8 Cyl. - 4.00 Bore BRONCO,E150-350,ECONOLINE SD,F150-350,CLUBWAGON(H.O.)3pc Set 3-163SB 1984-1996 INCLUDES [163], [S612] & [S531] W/ROLLER CHAINChain 163 1984-1996 58 LINKS ROLLER TYPE CHAINCam Sprocket S612 1984-1996 42 TEETHCrank Sprocket S531 1984-1996 21 TEETH

51 352 ENG - 1965-67 - 8 Cyl. - 4.00 Bore (F100-F350,P-350,RANCHERO)3pc Set 3-169S INCLUDES [169], [S410] & [S331] HEAVY DUTY


494 48 LINKS STANDARD DUTYCam Sprocket S410 48 TEETH HEAVY DUTYContinued on Next Page

109


51 352 ENG - 1965-67 - 8 Cyl. - 4.00 Bore (F100-F350,P-350,RANCHERO) (Continued)Crank Sprocket S321 18 TEETH STANDARD DUTY

S331 24 TEETH HEAVY DUTY52 359 ENG - 1974-78 - 8 Cyl. - 4.05 Bore (SERIES 600-900)

3pc Set 3-169SA INCLUDES [169], [S410] & [S353]Chain 169 64 LINKSCam Sprocket S410 48 TEETHCrank Sprocket S353 24 TEETH

53 360 ENG - 1968-76 - 8 Cyl. - 4.05 Bore (SERIES 100-500) INCLUDES VANS3pc Set 3-169S 1968-1973 INCLUDES [169], [S410] & [S331] HEAVY DUTY

3-494SA 1968-1973 INCLUDES [494], [S396] & [S321] STANDARD DUTY3-494SC 1974-1976 INCLUDES [494], [S448] & [S321] STANDARD DUTY


Cam Sprocket S396 1968-1973 36 TEETH STANDARD DUTYS410 1968-1973 48 TEETH HEAVY DUTYS448 1974-1976 36 TEETH STANDARD DUTY


54 361 ENG - 1964-78 - 8 Cyl. - 4.05 Bore3pc Set 3-169SA INCLUDES [169], [S410] & [S353]Chain 169 64 LINKSCam Sprocket S410 48 TEETHCrank Sprocket S353 24 TEETH

55 6.1 (370) ENG - 1980-91 - 8 Cyl. - 4.05 Bore (SERIES 600-900, SCHOOL BUS) MEDIUM DUTY3pc Set 3-168SC INCLUDES [168], [S438] & [S401]Chain 168 66 LINKSCam Sprocket S438 44 TEETHCrank Sprocket S401 22 TEETH

56 6.4 (389) ENG - 1975-78 - 8 Cyl. - 4.05 Bore (SERIES 600-900)3pc Set 3-169SA INCLUDES [169], [S410] & [S353]Chain 169 64 LINKSCam Sprocket S410 48 TEETHCrank Sprocket S353 24 TEETH

57 6.4-H,M (390) ENG - 1968-76 - 8 Cyl. - 4.05 Bore (SERIES 100-500)3pc Set 3-169S 1968-1973 INCLUDES [169], [S410] & [S331] HEAVY DUTY

3-494SA 1968-1973 INCLUDES [494], [S396] & [S321] STANDARD DUTY3-494SC 1974-1976 INCLUDES [494], [S448] & [S321] STANDARD DUTY


Cam Sprocket S396 1968-1973 36 TEETH STANDARD DUTYS410 1968-1973 48 TEETH HEAVY DUTYS448 1974-1976 36 TEETH STANDARD DUTY


58 391 ENG - 1964-78 - 8 Cyl. - 4.05 Bore (SERIES 600-900)3pc Set 3-169SA INCLUDES [169], [S410] & [S353]Chain 169 64 LINKSCam Sprocket S410 48 TEETHCrank Sprocket S353 24 TEETH

59 6.6-S,Z (400) ENG - 1977-82 - 8 Cyl. - 4.00 Bore (SERIES 100-500 BRONCO)3pc Set 3-494SB INCLUDES [494], [S420] & [S493]Chain 494 48 LINKSContinued on Next Page

110


59 6.6-S,Z (400) ENG - 1977-82 - 8 Cyl. - 4.00 Bore (SERIES 100-500 BRONCO) (Continued)Cam Sprocket S420 36 TEETHCrank Sprocket S493 18 TEETH

60 401 ENG - 1958-76 - 8 Cyl. - 4 1/8 Bore (SERIES 600-900)Crank Gear 2737 55 TEETH

61 6.8-S (415) SOHC ENG - 1997-13 - 10 Cyl - 3.55 Bore (E SERIES,F SERIES,EXCURSION) 20VTRITONTiming Kit 3-391SB 1997-2001 KIT INCLUDES (2) [391], [S764], [S766], [S843],

[BT402], [BT403], [BT411], [BT412], [BG413], [BG414] (USESUPDATED FINE FINISH CHAIN)

3-391SD 2003-2011 KIT INCLUDES (2) [391], [S764], [S766], [S869],[BT429], [BT430], [BT411], BT412], [BG413], [BG414] USESUPDATED FINE FINISH CHAIN EXCLUDES 2005 EXCURSION

3-391SG 2002 KIT INCLUDES (2) [391], [S764], [S766], [S869], [BG413],[BG414], [BT402], [BT403], [BT411] & [BT412]

Chain 391 1997-2012 122 LINKS 2 REQ. UPDATED FINE FINISH CHAINCam Thrust Plate Spacer S802SP 1997-2012Cam Sprocket S764 1997-2011 42 TEETH L.H. EXC 2005 EXCURSION

S766 1997-2012 42 TEETH R.H. EXC. 2005 EXCURSIONCrank Sprocket S843 1997-2001 21 TEETH (1 PC. DESIGN)

S869 2002-2012 21 TEETH HUB DESIGN WITH TIMING MARKChain Tensioner BT402 1997-2002 L.H. (ASSY), ADAPTER PLATES NOT REQUIRED

BT403 1997-2002 R.H. (ASSY)BT411 1997-2012 L.H. TENSIONER ARMBT412 1997-2012 R.H. TENSIONER ARMBT429 2003-2012 R.H. PLASTIC TENSIONER UPDATEBT430 2003-2012 L.H. PLASTIC TENSIONER UPDATE

Chain Guide BG413 1997-2012 L.H. (WITH ADDED GUIDERAIL, WILL RETOFIT OLDSTYLE GUIDE)

BG414 1997-2012 USE LONGER TOP BOLT; FORD OE [W709818-S437](NOT SUPPLIED) R.H.

62 6.8-Y (415) SOHC ENG. - 2005-13 - 10 Cyl. - 3.55 Bore F250SD,F350SD,F450SD,F550SD,F53 30V(TRITON)Timing Kit 3-391SD 2005-2010 KIT INCLUDES (2) [391], [S764], [S766], [S869],

[BT429], [BT430], [BT411], BT412], [BG413], [BG414] INCLUDESCAM SPROCKETS FOR NON INTEGRATED CAM SPROCKETENGINES

Chain 391 2005-2010 122 LINKS (2) REQUIRED; (UPDATED FINE FINISHCHAIN)

Cam Sprocket S764 2005-2010 42 TEETH L.H.; FOR NON INTEGRATED CAMSPROCKET ENGINES

S766 2005-2010 42 TEETH R.H.; FOR NON INTEGRATED CAMSPROCKET ENGINES

Crank Sprocket S869 2005-2010 21 TEETH HUB DESIGN WITH TIMING MARKChain Tensioner BT411 2008-2010 L.H. TENSIONER ARM

BT412 2005-2010 R.H. TENSIONER ARMBT429 2005-2010 R.H. UPDATED PLASTIC TENSIONERBT430 2005-2010 L.H. UPDATED PLASTIC TENSIONER

Chain Guide BG413 2005-2010 L.H. MANUFACTURED WITH ADDED GUIDERAIL,WILL RETROFIT OLD STYLE GUIDE

BG414 2007-2010 USE LONGER TOP BOLT; FORD OE [W709818-S437](NOT SUPPLIED) R.H. (EXCLUDES 2007 F350SD)

111


63 6.9 (420) DIESEL ENG - 1983-87 - 8 Cyl. - 4.00 BoreGear Set 3342S INCLUDES [3341] & [3342]Cam Gear 3342 106 TEETHCrank Gear 3341 53 TEETH

64 7.0 (428) OHV ENG - 1968-69 - 8 Cyl. - 4.13 Bore (RANCHERO) INC. COBRA JET/SUPER CJ3pc Set 3-169S INCLUDES [169], [S410] & [S331] HEAVY DUTY


494 48 LINKS STANDARD DUTYCam Sprocket S410 48 TEETH HEAVY DUTYCrank Sprocket S321 18 TEETH STANDARD DUTY

S331 24 TEETH HEAVY DUTY65 7.0 (429) OHV ENG - 1970-73 - 8 Cyl. - 4.36 Bore (RANCHERO) (INC. COBRA JET/SUPER CJ,

POLICE ENG) STANDARD DUTY3pc Set 3-491S 1972-1973 INCLUDES [491], [S420], [S421]

3-491SA 1970-1971 INCLUDES (491] CHAIN, [S420] CAM SPROCKET,[S493] CRANK SPROCKET

Chain 491 52 LINKSCam Sprocket S420 36 TEETHCrank Sprocket S493 1970-1971 18 TEETH

66 7.0 (429) ENG - 1980-98 - 8 Cyl. - 4.36 Bore (SERIES 600-800) GAS & LPG MEDIUM DUTY3pc Set 3-168SC INCLUDES [168], [S438] & [S401]Chain 168 66 LINKSCam Sprocket S438 44 TEETHCrank Sprocket S401 22 TEETH

67 7.3 (445) DIESEL ENG - 1988-03 - 8 Cyl. - 4.11 Bore (INCLUDES VANS) NATURAL ASPIRATED,D.I.TURBO DIESELGear Set 3342S 1988-1994 INCLUDES [3341] & [3342] EXC. 1994 D.I. TURBOCam Gear 3342 1988-1994 106 TEETH EXC. 1994 D.I. TURBOCrank Gear 3341 1988-1994 53 TEETH EXC. 1994 D.I. TURBO

68 7.5 (460) ENG - 1973-97 - 8 Cyl. - 4.36 Bore (SERIES E100-350, F100-350, F53 MOTORHOME,ECONOLINE S.D., F S.D.,RANCHERO) (INCLUDES VANS)3pc Set 3-168SD 1988-1992 INCLUDES [168], [S438] & [S685]

3-168SE 1993-1997 INCLUDES [168], [S438] & [S817]3-491S 1974-1987 INCLUDES [491], [S420], [S421] F100-F350 & E250-

E350Chain 168 1988-1997 66 LINKS

491 1973-1987 52 LINKS F100-350 & E250-350Cam Sprocket S420 1973-1987 36 TEETH F100-350 & E250-350


S817 1993-1997 22 TEETH69 475 ENG - 1973-79 - 8 Cyl. - 4 1/2 Bore (SERIES 600-900) MEDIUM DUTY

Crank Gear 2737 55 TEETH70 477 ENG - 1958-81 - 8 Cyl. - 4 1/2 Bore (SERIES 600-900)

Crank Gear 2737 55 TEETH71 534 ENG - 1958-81 - 8 Cyl. - 4 1/2 Bore (SERIES 600-900)

Crank Gear 2737 55 TEETH

112

GMC/CHEVY TRUCKSEngine Year Line Engine Year Line Engine Year Line

4 Cyl.1.6-6 1588CC SOHC 1994-00 11.6-U (98) SOHC 1989-95 21.8 (111) SOHC 1972-75 31.8 (111) SOHC 1976-82 41.9-A (119) OHC 1982-85 52.0-Y (122) OHV 1983-84 62.2 DIESEL 1981-83 72.2-4,5,H (134) OHV 1994-03 82.2-S DIESEL 1984-85 92.4-C,K,W (145) DOHC 2010-14 102.5-A (151) OHV 1991-93 112.5-E (151) OHV 1985-91 12153 (OHV) 1963-65 132.8-8 (169) DOHC 2004-06 146 Cyl.2.8-B & R (173) 1982-93 154 Cyl.2.9-9 (178) DOHC 2007-12 166 Cyl.194 (OHV) 1963-66 17200 (OHV) 1978-79 183.0-5,Y (182) DOHC 2010-12 193.4-F (207) OHV 2005-09 205 Cyl.3.5-6 (211) DOHC 2004-06 216 Cyl.217 1942-53 223.6-3,7,D (217) DOHC 2007-15 235 Cyl.3.7-E (223) DOHC 2007-12 246 Cyl.229 (OHV) 1980-84 25230 (OHV) 1963-69 26231 (OHV) 1978-84 27235 1942-62 28248 1939-55 29250 1966-84 304.2-S (256) DOHC 2002-09 31

6 Cyl. (Continued)

261 1954-62 324.3-B (262) 1990-91 334.3-N (262) 1985-86 344.3-W (262) OHV 1992-02 354.3-X (262) 2002-14 364.3-X (262) 1996-99 374.3-Z (262) OHV 1985-96 388 Cyl.265 1955-57 39267 1979-82 406 Cyl.270 OHV 1941-62 418 Cyl.283 ENG 1957-67 42288 1955 436 Cyl.4.8-T (292) 1963-89 448 Cyl.4.8-A,C,V (294) OHV 1999-13 456 Cyl.302 1952-59 46305 1960-69 478 Cyl.5.0 (305) OHV 1976-02 47307 1968-73 48317 1955-58 49322 1956-59 50324 1955-56 515.3 (323,325) OHV 1999-13 52327 OHV 1964-69 53347 1957 54348 1958-65 555.7 (350) 1968-79 565.7-N (350) 1983-84 575.7-Z (350) 1978-81 585.7-K (350) 1987-96 595.7-L, M & P (350) 1980-88 605.7-R (350) OHV 1996-02 61

6 Cyl.351 C,E,M 1965-68 628 Cyl.6.0 (364) OHV 1999-13 626.0 (366) 1968-79 636.0 (366) 1980-98 64370 1957-59 656 Cyl.379 1973-74 668 Cyl.6.2 (379) DIESEL 1982-93 666.2-8 (378) OHV 2007-08 676.2-2,F (376) OHV 2009-13 686.5 (395) OHV DIESEL 1992-02 69396 (400) 1968-70 70400 1974-80 716 Cyl.401 1960-65 72401 1966-72 738 Cyl.402 (400) 1971-72 74409 1962-65 757.0 (427) 1980-98 766 Cyl.432 & 432M 1973-74 778 Cyl.7.4 (454)OHV 1970-00 786 Cyl.478,478M 1962-74 79

D478,DH478 DIESEL 1965-74 808 Cyl.8.1-G (496) OHV 2001-07 818.1-E,G (496) OHV 2001-09 82637 1970-72 8312 Cyl.702 1960-65 84


1 1.6-6 1588CC SOHC ENG - 1994-00 - 4 Cyl. - 2.96 Bore (GEO TRACKER--SUZUKI ENG. M.F.I.)Belt B-0164 1994-1997 95 TEETH EXC. CALIF. EMISSIONS

B-0212 103 TEETH W/CALIF. EMISSIONS2 1.6-U (98) SOHC ENG - 1989-95 - 4 Cyl. - 2.95 Bore (GEO TRACKER--SUZUKI ENG. T.B.I.)


3 1.8-N (111) SOHC ENG - 1972-75 - 4 Cyl. - 3.31 Bore (LUV, LUV PICK UP)Chain 3DR58 58 LINKS LAY SHAFT CHAIN

3DR84 84 LINKS CAMSHAFT TIMING CHAINCam Sprocket S508 23 TEETH PRIMARYCrank Sprocket S527 40 TEETH SECONDARYDamper BD37 PRIMARY

113

GMC/CHEVY TRUCKS (Continued)LineNo. Part Title Part No Description

4 1.8-N (111) SOHC ENG - 1976-82 - 4 Cyl. - 3.31 Bore (LUV)Timing Kit 3SR94-1 KIT INCLUDES [3SR94], [S500], [S501], [BT17], [BT63] & [BD34]Chain 3SR94 94 LINKSCam Sprocket S500 38 TEETHCrank Sprocket S501 19 TEETHChain Tensioner BT17 ADJUSTER FOR TENSIONER

BT63 TENSIONERDamper BD34

5 1.9-A (119) OHC ENG - 1982-85 - 4 Cyl. - 3.425 BoreTiming Kit 3SR94-2 KIT INCLUDES [3SR94], [S500], [S501], [BT63], [BT61] & [BD34]Chain 3SR94 94 LINKSCam Sprocket S500 38 TEETHCrank Sprocket S501 19 TEETHChain Tensioner BT61 ADJUSTER


6 2.0-Y (122) OHV ENG - 1983-84 - 4 Cyl. - 3.39 Bore (S10,BLAZER,JIMMY)3pc Set 3-370S INCLUDES [395], [S558], [S549] & [MPC-393]Chain 395 58 LINKSCam Thrust Plate Spacer MG221Cam Sprocket S558 40 TEETHCrank Sprocket S549 20 TEETHChain Tensioner BT5115

7 2.2 DIESEL ENG - 1981-83 - 4 Cyl. - 88 MM Bore (LUV 11 & 12--ISUZU ENG)Belt B-075 87 TEETH

8 2.2-4,5,H (134) OHV ENG - 1994-03 - 4 Cyl. - 3.500 Bore (1994 - 03 2.2-4, 2000-02 2.2-5) (S10,SONOMA)3pc Set 3-370SA INCLUDES [395], [S774], [S549] & [MPC-393]

3-395S INCLUDES [370], [S774], [S549], [BT5115] & [MPC-393] RETROFIT FINE FINISH CHAIN SET, CHECK FOR POSSIBLE OILINGPROBLEM WHEN INSTALLING SET.

Chain 395 58 LINKS RETRO FIT FINE FINISH CHAINCam Thrust Plate Spacer MG221 1994-1997Cam Sprocket S774 40 TEETHCrank Sprocket S549 20 TEETHChain Tensioner BT5115

9 2.2-S DIESEL ENG - 1984-85 - 4 Cyl. - 88 MM BoreBelt B-075 87 TEETH

10 2.4-C,K,W (145) DOHC ENG - 2010-14 - 4 Cyl. - 3.46 Bore (CAPTIVA SPORT,EQUINOX,TERRAIN)16V ECOTECTiming Kit 3-4201SX 2010-2012 KIT INCLUDES [4201F], [BT5481], [BG5375], [BG5381],

[BG5382], [5467N] (DOES NOT INCLUDE SPROCKETS)CAMSHAFT CHAIN KIT

Chain 4201F 2010-2012 148 LINKS CAMSHAFT CHAIN4202F 2010-2012 134 LINKS BALANCE SHAFT CHAIN

Crank Sprocket S849 2010-2012 23 TEETH OUTERS851 2010-2012 42 TEETH INNER

Chain Tensioner BT5383 2010-2012 EXC. CAPTIVA SPORT; BALANCE SHAFT CHAINTENSIONER; LOWER

BT5481 2010-2012 NEW DESIGN W/10.0mm DIA. PLUNGER; 82.0mmO.A.L CAMSHAFT CHAIN TENSIONER; RIGHT HAND UPPER

Chain Guide BG5375 2010-2012 CAMSHAFT CHAIN GUIDE; RIGHT HANDBG5381 2010-2012 CAMSHAFT CHAIN GUIDE; LEFT HAND


114


10 2.4-C,K,W (145) DOHC ENG - 2010-14 - 4 Cyl. - 3.46 Bore (CAPTIVA SPORT,EQUINOX,TERRAIN)16V ECOTEC (Continued)Chain Guide BG5382 2010-2012 CAMSHAFT CHAIN GUIDE; CENTER UPPER

BG5384 2010-2012 BALANCE SHAFT CHAIN GUIDE; RIGHT HANDLOWER

BG5385 2010-2012 BALANCE SHAFT CHAIN GUIDE; LEFT HAND LOWERBG5386 2010-2012 BALANCE SHAFT CHAIN GUIDE; UPPER

11 2.5-A (151) OHV ENG - 1991-93 - 4 Cyl. - 4.000 Bore (INCLUDES VANS) (PONTIAC)Gear Set 2542S FIBER INCLUDES [2542] & [2537]Cam Gear 2542 54 TEETH FIBERCrank Gear 2537 27 TEETHCam Thrust Plate Spacer MG221

12 2.5-E (151) OHV ENG - 1985-91 - 4 Cyl. - 4.000 Bore (INCLUDES VANS) (PONTIAC)Gear Set 2542S FIBER INCLUDES [2542] & [2537]Cam Gear 2542 54 TEETH FIBERCrank Gear 2537 27 TEETHCam Thrust Plate Spacer MG221

13 153 (OHV) ENG - 1963-65 - 4 Cyl. - 3.88 Bore (INCLUDES VANS)Gear Set 2525S INCLUDES [2524] & [2501]Cam Gear 2524 54 TEETH ALUMINUM


14 2.8-8 (169) DOHC ENG - 2004-06 - 4 Cyl. - 3.66 Bore (CANYON,COLORADO)Timing Kit 3-195SC INCLUDES [195], [728F], [S908A], [S913], [BT5511], [BT5512],

[BG5504], [BG5506], [BG6006], [BG6007]Chain 195 168 LINKS TIMING CHAIN

728F 110 LINKS BALANCE SHAFT CHAINCam Sprocket S908A 58 TEETHCrank Sprocket S913 29 TEETHChain Tensioner BT5511 REPLACES 1ST DESIGN SPRING TYPE TENSIONER;

CONVERT TO HYDRAULIC TENSIONER BY USINGCONVERSION KIT #89018114; (NOT INCLUDED) BALANCESHAFT CHAIN TENSIONER

BT5512 TIMING CHAIN TENSIONERChain Guide BG5504 TIMING CHAIN GUIDE; R.H.

BG5506 TIMING CHAIN GUIDE; L.H.BG6006 TIMING CHAIN GUIDE; UPPERBG6007 BALANCE SHAFT CHAIN GUIDE

15 2.8-B & R (173) ENG - 1982-93 - V6 - 3.504 Bore (1982-85 2.8-B & 1986-93 2.8-R) (1982-93 2WD)(1983-93 4WD)3pc Set 3-373S INCLUDES [373], [S506] & [S511]Chain 373 64 LINKSCam Sprocket S506 40 TEETHCrank Sprocket S511 20 TEETHDamper BD59

16 2.9-9 (178) DOHC ENG - 2007-12 - 4 Cyl. - 3.76 Bore (CANYON,COLORADO)Timing Kit 3-195SA INCLUDES [195], [728F], [S908A], [S913], [BT5511], [BT5512],


728F 110 LINKS BALANCE SHAFT CHAINCam Sprocket S908A 58 TEETHCrank Sprocket S913 29 TEETHContinued on Next Page

115


16 2.9-9 (178) DOHC ENG - 2007-12 - 4 Cyl. - 3.76 Bore (CANYON,COLORADO) (Continued)Chain Tensioner BT5511 REPLACES 1ST DESIGN SPRING TYPE TENSIONER;




17 194 (OHV) ENG - 1963-66 - 6 Cyl. - 3.56 Bore (CHEVY 1964-66) (GMC 1963-66) (INCLUDES VANS)Gear Set 2525S INCLUDES [2524] & [2501]Cam Gear 2524 54 TEETH ALUMINUM


18 200 (OHV) ENG - 1978-79 - V6 - 3 1/2 Bore3pc Set 3-163S INCLUDES [163], [S288] & [S289] H.D.




S505 18 TEETH19 3.0-5,Y (182) DOHC ENG - 2010-12 - 6 Cyl. - 3.50 Bore (CAPTIVA SPORT,EQUINOX,TERRAIN) 24V

LF1,LFW GAS/FLEX ENG.Timing Kit 3-753S 2010-2011 INCLUDES [753], (2) [754], [S921], [S930], [S932],

[BT5535], [BT5536], [BT5537], [BG5548], [BG5530], [BG5531],[BG5532], [BG5533], [BG5534] FOR ENGINES USING SILENTTYPE CHAINS

Chain 753 96 LINKS PRIMARY CHAIN; LOWER754 2010-2011 114 LINKS SECONDARY CHAIN; UPPER; 2 REQUIRED


S932 2010-2011 22 TEETH INCLUDES MOUNTING BOLT RIGHT HANDChain Tensioner BT5535 INCLUDES GASKET AND 2 MOUNTING BOLTS SECONDARY






BG5533 PRIMARY CHAIN; RIGHT HANDBG5534 PRIMARY CHAIN; LEFT HAND; LOWERBG5548 2010-2011 PRIMARY CHAIN; RIGHT HAND; LOWER

20 3.4-F (207) OHV ENG - 2005-09 - 6 Cyl. - 3.62 Bore (EQUINOX LS,LT)Timing Kit 3-700SB 2005-2006 KIT INCLUDES [700], [S847], [S848], [BD600]3pc Set 3-700S 2005-2006 INCLUDES [700], [S847], [S848]Continued on Next Page

116


20 3.4-F (207) OHV ENG - 2005-09 - 6 Cyl. - 3.62 Bore (EQUINOX LS,LT) (Continued)Chain 700 2005-2007 80 LINKSCam Sprocket S848 2005-2006 50 TEETHCrank Sprocket S847 25 TEETHDamper BD600

21 3.5-6 (211) DOHC ENG - 2004-06 - 5 Cyl. - 3.66 Bore (CANYON,COLORADO)Timing Kit 3-195SC INCLUDES [195P], [728FP], [S908AP], [S913P], [BT5511P],

[BT5512P], [BG5504P], [BG5506P], [BG6006P], [BG6007P]Chain 195 168 LINKS TIMING CHAIN





22 217 ENG - 1942-53 - 6 Cyl. - 3 1/2 BoreGear Set 2516S INCLUDES [2514] & [2501]Cam Gear 2514 54 TEETH ALUMCrank Gear 2501 27 TEETH

23 3.6-3,7,D (217) DOHC ENG - 2007-15 - 6 Cyl. - 3.70 Bore(ACADIA,CANYON,COLORADO,EQUINOX,TERRAIN,TRAVERSE) (CAPTIVA SPORT - MEXICO) 24VGAS/FLEX ENG.Timing Kit 3-753S 2007-2012 INCLUDES [753], (2) [754], [S921], [S930], [S932],

[BT5535], [BT5536], [BT5537], [BG5548], [BG5530], [BG5531],[BG5532], [BG5533], [BG5534] EXCLUDES 2008-09 EQUINOX;FOR ENGINES USING SILENT TYPE CHAINS

Chain 753 96 LINKS PRIMARY CHAIN; LOWER EXCLUDES 2008-09EQUINOX

754 114 LINKS SECONDARY CHAIN; UPPER; 2 REQUIRED;EXCLUDES 2008-09 EQUINOX

Idler Sprocket S930 2007-2012 22 TEETH INCLUDES MOUNTING BOLT LEFT HANDS932 2007-2012 22 TEETH INCLUDES MOUNTING BOLT RIGHT HAND

Chain Tensioner BT5535 2007-2012 INCLUDES GASKET AND 2 MOUNTING BOLTSSECONDARY CHAIN; LEFT HAND

BT5536 2007-2012 INCLUDES GASKET AND 2 MOUNTING BOLTSSECONDARY CHAIN; RIGHT HAND

BT5537 2007-2012 INCLUDES MOUNTING GASKET AND 2 MOUNTINGBOLTS PRIMARY CHAIN

Chain Guide BG5530 2007-2012 INCLUDES (2) MOUNTING BOLTS PRIMARY CHAIN;UPPER



BG5533 2007-2012 PRIMARY CHAIN; RIGHT HANDBG5534 2007-2012 PRIMARY CHAIN; LEFT HAND; LOWERBG5548 2007-2012 PRIMARY CHAIN; RIGHT HAND; LOWER

117


24 3.7-E (223) DOHC - 2007-12 - 5 Cyl. - 3.76 Bore (CANYON, COLORADO)Timing Kit 3-195SA INCLUDES [195], [728F], [S908A], [S913], [BT5511], [BT5512],






25 229 (OHV) ENG - 1980-84 - V6 - 3.736 Bore3pc Set 3-163S INCLUDES [163], [S288] & [S289] H.D.




S505 18 TEETH26 230 (OHV) ENG - 1963-69 - 6 Cyl. - 3 7/8 Bore

Gear Set 2525S INCLUDES [2524] & [2501]Cam Gear 2524 54 TEETH ALUMINUM


27 231 (OHV) ENG - 1978-84 - V6 - 3.78,3.80 Bore (CABALLERO,EL CAMINO) BUICK ENG.3pc Set 3-359SB INCLUDES [359], [S610] & [S323]Chain 359 54 LINKSCam Sprocket S610 40 TEETHCrank Sprocket S323 20 TEETHDamper BD44 1978-1984 RIGHT HAND W/SPRING

BD45 1978-1981 LEFT HAND28 235 ENG - 1942-62 - 6 Cyl. - 3.56 Bore (CHEVY ONLY)

Gear Set 2516S INCLUDES [2514] & [2501]Cam Gear 2500 54 TEETH FIBER


29 248 ENG - 1939-55 - 6 Cyl. - 3.72 Bore (GMC ONLY)Cam Gear 2500 54 TEETH FIBER

2514 54 TEETH ALUM30 250 ENG - 1966-84 - 6 Cyl. - 3.88 Bore (INCLUDES VANS) (GAS & LPG)

Gear Set 2525S 1966-1976 INCLUDES [2524] & [2501] S.D. W/INT. MANIFOLD &CYL. HEAD CAST SEPARATE

2528S 1976-1984 ALUM. CAM GEAR & STEEL CRANK GEAR H.D.W/INTAKE MANIFOLD & CYL. HEAD CAST SEPARATE

2538S 1975-1976 ALUM. INCLUDES [2524] & [2537] TO EARLY 1976W/INTAKE MANIFOLD CAST AS INTEGRAL PART OF CYL. HEAD


118


30 250 ENG - 1966-84 - 6 Cyl. - 3.88 Bore (INCLUDES VANS) (GAS & LPG) (Continued)Gear Set 2540S 1976-1984 INCLUDES [2526] & [2541] LATE 1976-84 W/INTAKE

MANIFOLD CAST AS INTEGRAL PART OF CYL. HEADCam Gear 2524 1966-1976 54 TEETH ALUMINUM 1966 TO EARLY 76 W/GEAR

STAMPED #142526 1976-1984 54 TEETH LATE 1976-84 W/GEAR STAMPED #202542 1966-1976 54 TEETH FIBER 1966 TO EARLY 76 W/GEAR

STAMPED #14Crank Gear 2501 1966-1976 27 TEETH W/INT. MANIFOLD & CYL. HEAD CAST

SEPARATE2527 1976-1984 27 TEETH H.D. W/INTAKE MANIFOLD & CYL. HEAD

CAST SEPARATE2537 1975-1976 27 TEETH 1975 TO EARLY 76 W/GEAR STAMPED #71

AND INTAKE MANIFOLD CAST AS INTEGRAL PART OF CYL.HEAD

Cam Thrust Plate Spacer MG22131 4.2-S (256) ENG - 2002-09 - 6 Cyl. - 3.66 Bore (ENVOY,TRAILBLAZER) VORTEC

Timing Kit 3-195S 2002-2007 INCLUDES [195], [S908A], [S913], [BT5512], [BG5504],[BG5506], [BG6006]

3-195SB 2008-2009 INCLUDES [195], [S908A], [S913], [BT5512], [BG5504],[BG5510], [BG6006]

Chain 195 168 LINKSCam Sprocket S908A 58 TEETHCrank Sprocket S913 29 TEETHChain Tensioner BT5512Chain Guide BG5504 RIGHT HAND

BG5506 2002-2007 LEFT HANDBG5510 2008-2009 LEFT HANDBG6006 2002-2007 UPPER

32 261 ENG - 1954-62 - 6 Cyl. - 3.75 Bore (CHEVY ONLY) (NOT MANUFACTURED IN 1959)Gear Set 2516S INCLUDES [2514] & [2501]Cam Gear 2500 54 TEETH FIBER


33 4.3-B (262) ENG - 1990-91 - V6 - 4.000 Bore (ASTRO, SAFARI)3pc Set 3-506SB INCLUDES [499], [S732] & [S505]Chain 499 46 LINKSCam Sprocket S732 36 TEETHCrank Sprocket S505 18 TEETH

34 4.3-N (262) ENG - 1985-86 - V6 - 4.000 Bore3pc Set 3-499SA INCLUDES [499], [S390] & [S505]Chain 499 46 LINKSCam Sprocket S390 36 TEETHCrank Sprocket S505 18 TEETH

35 4.3-W (262) OHV ENG - 1992-02 - V6 - 4.000 Bore INCLUDES VANS3pc Set 3-509S 1992-1998 INCLUDES [499], [S776] & [S505]

3-8MMSRH72S 1999-2002 INCLUDES [8MMSRH72], [S835], [S836] USE BT5452AND GM COVER #89017259 WITH THIS SET TO ELIMINATERATTLE.

Chain 499 1992-1998 46 LINKS8MMSRH72 1999-2002 72 LINKS

Cam Sprocket S776 1992-1998 36 TEETHS836 1999-2002 56 TEETH


119


35 4.3-W (262) OHV ENG - 1992-02 - V6 - 4.000 Bore INCLUDES VANS (Continued)Crank Sprocket S505 1992-1998 18 TEETH

S835 1999-2002 28 TEETHChain Tensioner BT5452 1999-2002 FOR USE WITH 3-8MMSRH72S TO ELIMINATE

RATTLE. USE WITH GM COVER #8901725936 4.3-X (262) OHV ENG - 2002-14 - V6 - 4.00 Bore

(EXPRESS,SAVANA,JIMMY,BLAZER,S10,SIERRA,SILVERADO,SONOMA)(INCLUDES MINI VANS)VORTEC3pc Set 3-8MMSRH72S 2002-2006 INCLUDES [8MMSRH72], [S835], [S836]

3-8MMSRH72SA 2007-2011 INCLUDES [8MMSRH72], [S835], [S928]Chain 8MMSRH72 2002-2012 72 LINKSCam Sprocket S836 2002-2006 56 TEETH

S928 2007-2011 56 TEETHCrank Sprocket S835 2002-2011 28 TEETHChain Tensioner BT5452 2002-2003 TO ELIMINATE RATTLE; USE W/GM COVER

#89017259BT5568 2004-2011 TENSIONER GUIDE; TO ELIMINATE RATTLE USE

W/GM COVER #8901725937 4.3-X (262) OHV ENG - 1996-99 - V6 - 4.00 Bore (S10, SONOMA) VORTEC

3pc Set 3-509S 1996-1998 INCLUDES [499], [S776] & [S505]3-8MMSRH72S 1999 INCLUDES [8MMSRH72], [S835], [S836]

Chain 499 1996-1998 46 LINKS8MMSRH72 1999 72 LINKS

Cam Sprocket S776 1996-1998 36 TEETHS836 1999 56 TEETH

Crank Sprocket S505 1996-1998 18 TEETHS835 1999 28 TEETH

Chain Tensioner BT5452 199938 4.3-Z (262) OHV ENG - 1985-96 - V6 - 4.00 Bore INCLUDES VANS

3pc Set 3-506SB 1987-1996 INCLUDES [499], [S732] & [S505] EXC. 1993TYPHOON; FOR ENGINES WITHOUT BALANCE SHAFTS

3-509S 1992-1996 INCLUDES [499], [S776] & [S505] EXC. 1993TYPHOON; FOR ENGINES WITH BALANCE SHAFT

Chain 499 46 LINKS EXC. 1993 TYPHOONCam Sprocket S390 1985-1986 36 TEETH

S732 1987-1996 36 TEETH FOR ENGINES WITHOUT BALANCESHAFTS

S776 1992-1996 36 TEETH FOR ENGINES WITH BALANCE SHAFTCrank Sprocket S505 18 TEETH EXC. 1993 TYPHOON

39 265 ENG - 1955-57 - 8 Cyl. - 3 3/4 Bore (CHEVY ONLY)3pc Set 3-163S INCLUDES [163], [S288] & [S289] H.D.

3-489S INCLUDES [505],[S261] & [S262]Chain 163 58 LINKS H.D.

505 46 LINKSCam Sprocket S261 36 TEETH

S288 44 TEETH H.D.Crank Sprocket S262 18 TEETH

S289 22 TEETH H.D.40 267 ENG - 1979-82 - 8 Cyl. - 3 1/2 Bore

3pc Set 3-163S INCLUDES [163], [S288] & [S289] H.D.3-499S INCLUDES [499], [S390] & [S391]



120


40 267 ENG - 1979-82 - 8 Cyl. - 3 1/2 Bore (Continued)Cam Sprocket S288 44 TEETH H.D.


S391 18 TEETH41 270 OHV ENG - 1941-62 - 6 Cyl. - 3.78 Bore (GMC ONLY)

Cam Gear 2500 54 TEETH FIBER2514 54 TEETH ALUM

42 283 ENG - 1957-67 - 8 Cyl. - 3.88 Bore (INCLUDES VANS)3pc Set 3-163S INCLUDES [163], [S288] & [S289] HEAVY DUTY

3-489S 1957-1966 INCLUDES [505],[S261] & [S262] STANDARD DUTY3-499S 1967 INCLUDES [499], [S390] & [S391] STANDARD DUTY

Chain 163 58 LINKS HEAVY DUTY499 1967 46 LINKS STANDARD DUTY505 1957-1966 46 LINKS STANDARD DUTY

Cam Sprocket S261 1957-1966 36 TEETH STANDARD DUTYS288 44 TEETH HEAVY DUTYS390 1967 36 TEETH STANDARD DUTY

Crank Sprocket S262 1957-1966 18 TEETH STANDARD DUTYS289 22 TEETH HEAVY DUTYS391 1967 18 TEETH STANDARD DUTY

43 288 ENG - 1955-55 - 8 Cyl. - 3.75 Bore (GMC ONLY) V BLOCKChain 347 60 LINKS

44 4.8-T (292) ENG - 1963-89 - 6 Cyl. - 3.88 Bore (INCLUDES VANS)Gear Set 2528S ALUM. CAM GEAR & STEEL CRANK GEAR REPLACE AS A SET

ONLY; NOTE: IN 1963-65 IT MAY REQUIRE A NEW CRANKCASEFRONT COVER

Cam Gear 2526 1966-1989 54 TEETHCrank Gear 2527 1966-1989 27 TEETHCam Thrust Plate Spacer MG221

45 4.8-A,C,V (294) OHV ENG - 1999-13 - 8 Cyl. - 3.78 Bore (GEN III, GEN IV VORTEC) GAS/FLEXINCLUDES VANS3pc Set 3-3SRH60S 2007 INCLUDES [3SRH60], [S894] & [S827]; FOR USE W/SINGLE

BOLT CAMSHAFT TAHOE,YUKON; NON-RELUCTOR STYLECAM SPROCKET

3-3SRH60S 2008-2010 INCLUDES [3SRH60], [S894] & [S827]; FOR USEW/SINGLE BOLT CAMSHAFT 2008-09 TAHOE,YUKON; 2008-10EXPRESS,SAVANA; NON-RELUCTOR STYLE CAM SPROCKET

3-3SRH60SA 1999-2006 INCLUDES [3SRH60], [S878] & [S827]; FOR USE W/3BOLT CAMSHAFT RELUCTOR STYLE CAM SPROCKET; HALFMOON HUB ON FACE

3-3SRH60SA 2007 INCLUDES [3SRH60], [S878] & [S827]; FOR USE W/3 BOLTCAMSHAFT EXPRESS 2500, SAVANA 2500 & SAVANA 3500ONLY (RELUCTOR STYLE CAM SPROCKET, HALF MOON HUBON FACE)

Chain 3SRH60 1999-2012 60 LINKSCam Sprocket S878 1999-2006 44 TEETH; FOR USE W/3BOLT CAMSHAFT

RELUCTOR STYLE CAM SPROCKET, HALF MOON HUB ONFACE

S878 2007 44 TEETH; FOR USE W/3BOLT CAMSHAFT EXPRESS,SAVANA 2500 & 3500 ONLY; RELUCTOR STYLE CAMSPROCKET; HALF MOON HUB ON FACE


121


45 4.8-A,C,V (294) OHV ENG - 1999-13 - 8 Cyl. - 3.78 Bore (GEN III, GEN IV VORTEC) GAS/FLEXINCLUDES VANS (Continued)Cam Sprocket S894 2007 44 TEETH; FOR USE W/SINGLE BOLT CAM TAHOE,YUKON

(NON RELUCTOR STYLE CAM SPROCKET)S894 2008-2009 44 TEETH; FOR USE W/SINGLE BOLT CAM TAHOE,

YUKON,EXPRESS,SAVANAS894 2010 44 TEETH; FOR USE W/SINGLE BOLT CAM EXPRESS,

SAVANACrank Sprocket S827 1999-2012 22 TEETH 22 TEETHChain Tensioner BT5490 2007 TAHOE, VIN CODE C ONLY

BT5490 2007-2009 SILVERADO 1500 & SIERRA 1500, YUKON VIN CODEC ONLY

BT5490 2008 EXPRESS 2500 & EXPRESS 3500; VIN CODE C ONLYBT5490 2008-2010 SAVANA 2500 & SAVANA 3500; VIN CODE C ONLY

Chain Damper AdapterBracket

BD417-BRKT 1999-2006 ALLOWS THE USE OF THE LS2 TIMING CHAINDAMPER [BD417] ON ANY GM LS ENGINE BLOCK NOTORIGINALLY EQUIPPED FOR CHAIN DAMPERS; DAMPER NOTINCLUDED VIN CODE V; EXCLUDES VVT ENGINES

BD417-DBRKT 1999-2006 ALLOWS THE USE OF THE LS2 TIMING CHAINDAMPER [BD417] ON ANY GM LS ENGINE BLOCK NOTORIGINALLY EQUIPPED FOR CHAIN DAMPERS; INCLUDES[BD417] DAMPER VIN CODE V; EXCLUDES VVT ENGINES

46 302 ENG - 1952-59 - 6 Cyl. - 4.00 Bore (GMC ONLY)Cam Gear 2500 54 TEETH FIBER

2514 54 TEETH ALUM47 5.0 (305) OHV ENG - 1976-02 - 8 Cyl. - 3.74 Bore INCLUDES VANS

3pc Set 3-163S INCLUDES [163], [S288] & [S289] HEAVY DUTY3-499S 1976-1995 INCLUDES [499], [S390] & [S391] STANDARD DUTY3-506SC 1996-2002 INCLUDES [499], [S732] & [S391] STANDARD DUTY


Cam Sprocket S288 44 TEETH HEAVY DUTYS390 1976-1995 36 TEETH STANDARD DUTYS732 1996-2002 36 TEETH STANDARD DUTY






S391 18 TEETH STANDARD DUTY49 317 ENG - 1955-58 - 8 Cyl. - 3 15/16 Bore

Chain 347 60 LINKS50 322 ENG - 1956-59 - 8 Cyl. - 4.000 Bore (CHEVY ONLY)

Cam Sprocket S346 54 TEETHCrank Sprocket S347 27 TEETH

51 324 ENG - 1955-56 - 8 Cyl. - 3 7/8 Bore (GMC ONLY)Chain 494 48 LINKSCrank Sprocket S246 18 TEETH

122


52 5.3 (323,325) OHV ENG - 1999-2013 - 8 Cyl. - 3.78 Bore (GEN III, GEN IV VORTEC) (INCLUDESVANS) GAS,FLEX,ELECTRIC3pc Set 3-3SRH60S 2007-2009 INCLUDES [3SRH60], [S894] & [S827]; FOR USE

W/SINGLE BOLT CAMSHAFT VIN CODES J,M,0,3;SILVERADO,TAHOE,TRAILBLAZER,ENVOY,SIERRA1500,YUKON (KIT INCLUDES NON RELUCTOR STYLE CAMSPROCKET)

3-3SRH60S 2008-2010 INCLUDES [3SRH60], [S894] & [S827]; FOR USEW/SINGLE BOLT CAMSHAFT EXPRESS 1500,SAVANA 1500 VINCODE 4; (THIS KIT CONTAINS THE NON-RELUCTOR STYLECAM SPROCKET)

3-3SRH60SA 1999-2004 INCLUDES [3SRH60], [S878] & [S827]; FOR USE W/3BOLT CAMSHAFT

3-3SRH60SA 2005-2006 INCLUDES [3SRH60], [S878] & [S827]; FOR USE W/3BOLT CAMSHAFT VIN M TRAILBLAZER,ENVOY(THIS KITINCLUDES RELUCTOR STYLE CAM SPROCKET, HALF MOONHUB ON FACE)

3-3SRH60SA 2005-2007 INCLUDES [3SRH60], [S878] & [S827]; FOR USE W/3BOLT CAMSHAFT VIN CODES B,T,Z;AVALANCHE,EXPRESS,SAVANA,SIERRA,SILVERADO,SUBURBA-N,TAHOE,YUKON,YUKON XL (RELUCTOR STYLE CAMSPROCKET, HALF MOON HUB ON FACE.


S878 2005-2006 44 TEETH; FOR USE W/3BOLT CAMSHAFTTRAILBLAZER, ENVOY VIN M ONLY; RELUCTOR STYLE CAMSPROCKET, HALF MOON HUB ON FACE

S878 2005-2007 44 TEETH; FOR USE W/3BOLT CAMSHAFT VINCODES B,T,Z;AVALANCHE,EXPRESS,SAVANA,SIERRA,SILVERADO,SUBURBA-N,TAHOE,YUKON,YUKON XL (RELUCTOR STYLE CAMSPROCKET, HALF MOON HUB ON FACE. MUST BE USED WITH3SRH60 CHAIN)

S894 2007-2009 44 TEETH; FOR USE W/SINGLE BOLT CAM VINCODES J,M,0,3; AVALANCHE,SILVERADO 1500,SIERRA1500,ENVOY,TRAILBLAZER,SUBURBAN1500,TAHOE,YUKON,YUKON XL 1500(NON-RELUCTOR STYLECAM SPROCKET)

S894 2008-2010 44 TEETH; FOR USE W/SINGLE BOLT CAM VIN 4;EXPRESS 1500, SAVANA 1500;(NON-RELUCTOR STYLE CAMSPROCKET)

Crank Sprocket S827 1999-2012 22 TEETH 22 TEETHChain Tensioner BT5490 2007-2011 CANYON, SIERRA 1500, SIERRA, YUKON, YUKON

XL1500BT5490 2007-2012 AVALANCHE, COLORADO, ENVOY, EXPRESS 1500,

SILVERADO 1500, SILVERADO 3500, TAHOE & TRAILBLAZERBT5490 2008-2011 EXPRESS 3500, SAVANA 1500

Damper BD417 2003-2006 EXPRESS 1500,EXPRESS 2500,EXPRESS 3500BD417 2004-2005 SUBURBAN 1500,YUKON XL 1500BD417 2004-2006 SILVERADO 1500,SILVERADO 2500,SILVERADO 3500,

TAHOE,YUKONBD417 2005 SAVANA 2500BD417 2005-2006 AVALANCHE 1500,ENVOY, SIERRA 1500BD417 2005-2007 SAVANA 1500


123


52 5.3 (323,325) OHV ENG - 1999-2013 - 8 Cyl. - 3.78 Bore (GEN III, GEN IV VORTEC) (INCLUDESVANS) GAS,FLEX,ELECTRIC (Continued)Damper BD417 2006 TRAILBLAZERChain Damper AdapterBracket



53 327 OHV ENG - 1964-69 - 8 Cyl. - 4.00 Bore (INCLUDES EL CAMINO & VANS)3pc Set 3-163S INCLUDES [163], [S288] & [S289] HEAVY DUTY

3-489S 1964-1966 INCLUDES [505],[S261] & [S262] STANDARD DUTY3-499S 1967-1969 INCLUDES [499], [S390] & [S391] STANDARD DUTY

Chain 163 58 LINKS HEAVY DUTY499 1967-1969 46 LINKS STANDARD DUTY505 1964-1966 46 LINKS STANDARD DUTY

Cam Sprocket S261 1964-1966 36 TEETH STANDARD DUTYS288 44 TEETH HEAVY DUTYS390 1967-1969 36 TEETH STANDARD DUTY


54 347 ENG - 1957 - 8 Cyl. - 3 15/16 BoreChain 347 60 LINKS

55 348 ENG - 1958-65 - 8 Cyl. - 4 1/8 Bore (CHEVY ONLY)Chain 162 64 LINKS

56 5.7 (350) OHV ENG - 1968-79 - 8 Cyl. - 4.00 Bore (CARBURETED & FI) (GAS,LPG)3pc Set 3-163S INCLUDES [163], [S288] & [S289] HEAVY DUTY; REPLACE AS A

SET3-499S INCLUDES [499], [S390] & [S391] STANDARD DUTY; REPLACE

AS A SETChain 163 58 LINKS HEAVY DUTY



S391 18 TEETH STANDARD DUTY57 5.7-N (350) ENG - 1983-84 - 8 Cyl. - 4.000 Bore FUEL INJECTED DIESEL ENGINES





58 5.7-Z (350) ENG - 1978-81 - 8 Cyl. - 4.06 Bore (CHEVY 1978-81) (GMC 1978-81) (DIESEL)Chain 180 48 LINKSCrank Sprocket S503 18 TEETH

124


59 5.7-K (350) ENG - 1987-96 - 8 Cyl. - 4.000 Bore (INCLUDES VANS & TRUCKS)3pc Set 3-163S INCLUDES [163], [S288] & [S289] HEAVY DUTY ROLLER (WILL

WORK FOR ALL TOOTH WIDTHS IF REPLACED AS A SET)3-202S INCLUDES [202], [S634] & [S645] STANDARD DUTY ROLLER

(.275/.285) WILL WORK FOR ALL TOOTH WIDTHS IF REPLACEDAS A SET

3-499SA INCLUDES [499], [S390] & [S505] STANDARD DUTY SILENT;.40/.41 TOOTH WIDTH; WILL WORK FOR ALL TOOTH WIDTHSIF REPLACED AS A SET

Chain 163 58 LINKS HEAVY DUTY ROLLER CHAIN; USE WITH S289, S288HEAVY DUTY SPROCKETS

202 46 LINKS STANDARD DUTY ROLLER CHAIN; 275/.285 TOOTHWIDTH; USE WITH S634, S645 STANDARD DUTY SPROCKETS

499 46 LINKS STANDARD DUTY SILENT CHAIN; .40/.41 TOOTHWIDTH; WILL WORK WITH S390, S505 HEAVY DUTYSPROCKETS

Cam Sprocket S288 44 TEETH HEAVY DUTY; FOR USE WITH [163] HEAVY DUTYROLLER CHAIN

S390 36 TEETH HEAVY DUTY (.40/.41 TOOTH WIDTH) (FOR USEWITH [506] HEAVY DUTY SILENT CHAIN OR [499] STANDARDDUTY SILENT CHAIN)

S634 36 TEETH STANDARD DUTY (.275/.285 TOOTH WIDTH) (FORUSE WITH [202] STANDARD DUTY ROLLER CHAIN)

Crank Sprocket S289 22 TEETH HEAVY DUTY (USE WITH [163] HEAVY DUTYROLLER CHAIN)

S505 18 TEETH HEAVY DUTY (.40/.41 TOOTH WIDTH) (FOR USEWITH [506] HEAVY DUTY SILENT CHAIN OR [499] STANDARDDUTY SILENT CHAIN)

S645 18 TEETH STANDARD DUTY (.275/.285 TOOTH WIDTH) (USEWITH [202] STANDARD DUTY ROLLER CHAIN

60 5.7-L,M & P (350) ENG - 1980-88 - 8 Cyl. - 4.00 Bore (CARBURETED) (GAS ENG)3pc Set 3-163S INCLUDES [163], [S288] & [S289] W/HEAVY DUTY ROLLER

CHAIN; REPLACE AS A COMPLETE SET3-202S 1985-1988 INCLUDES [202], [S634] & [S645] VIN CODE M & P;

W/.275/.285 WIDTH STANDARD DUTY ROLLER CHAIN;REPLACE AS SET

3-499S 1980-1984 INCLUDES [499], [S390] & [S391] VIN CODE M & P;W/.40/.41 STANDARD DUTY SILENT CHAIN; REPLACE ASCOMPLETE SET

3-499S 1980-1986 INCLUDES [499], [S390] & [S391] VIN CODE L;W/.40/.41 STANDARD DUTY SILENT CHAIN; REPLACE ASCOMPLETE SET

3-499SA 1985-1988 INCLUDES [499], [S390] & [S505] VIN CODE M & P;W/.40/.41 STANDARD DUTY SILENT CHAIN; REPLACE ASCOMPLETE SET

Chain 163 58 LINKS HEAVY DUTY ROLLER CHAIN202 1985-1988 46 LINKS VIN CODE M & P; .275/.285 TOOTH WIDTH,

STANDARD DUTY ROLLER CHAIN499 1980-1984 46 LINKS VIN CODE M & P; .40/.41 TOOTH WIDTH W/

BACK BEND; STANDARD SILENT CHAIN499 1980-1986 46 LINKS VIN CODE L; .40/.41 TOOTH WIDTH W/

BACK BEND; STANDARD SILENT CHAIN499 1985-1988 46 LINKS VIN CODE M & P; .40/.41 TOOTH WIDTH;

STANDARD DUTY SILENT CHAINContinued on Next Page

125


60 5.7-L,M & P (350) ENG - 1980-88 - 8 Cyl. - 4.00 Bore (CARBURETED) (GAS ENG) (Continued)Cam Sprocket S288 44 TEETH HEAVY DUTY; USE W/ 163 CHAIN

S390 1980-1988 36 TEETH VIN CODES L,M & P; STANDARD DUTY,.40/.41 TOOTH WIDTH, USE W/ 499 & 506 CHAINS

S634 1985-1988 36 TEETH VIN CODE M & P; STANDARD DUTY;.275/.285 TOOTH WIDTH; USE W/ 202 CHAIN

Crank Sprocket S289 22 TEETH HEAVY DUTY, USE W/ 163 CHAINS391 18 TEETH VIN L; STANDARD DUTY; USE W/ 499 CHAINS391 1980-1984 18 TEETH VIN CODE M & P; STANDARD DUTY;

.40/.41 TOOTH WIDTH USE W/ 499 CHAINS505 1985-1988 18 TEETH VIN CODE M & P; HEAVY DUTY; .40/.41

TOOTH WIDTH; USE W/ 506 CHAINS645 1985-1988 18 TEETH VIN CODE M & P; STANDARD DUTY;

.275/.285 TOOTH WIDTH; USE WITH 202 CHAIN61 5.7-R (350) OHV ENG - 1996-02 - 8 Cyl. - 4.000 Bore (VORTEC) INCLUDES VANS

3pc Set 3-202SA INCLUDES [202], [S784], [S645] .275/.285 TOOTH WIDTH;STANDARD DUTY ROLLER CHAIN

3-506SE INCLUDES [499], [S732], [S797] .40/.41 TOOTH WIDTH;STANDARD DUTY SILENT CHAIN

Chain 202 46 LINKS 275/.285 TOOTH WIDTH, STANDARD DUTY ROLLERCHAIN

499 46 LINKS .40/.41 TOOTH WIDTH; STANDARD DUTY SILENTCHAIN

Cam Sprocket S732 36 TEETH HEAVY DUTY; .40/.41 TOOTH WIDTH; USE WITH[506] HEAVY DUTY SILENT CHAIN

S784 36 TEETH STANDARD DUTY; .275/.285 TOOTH WIDTH; USEWITH [202] STANDARD DUTY ROLLER CHAIN

Crank Sprocket S645 18 TEETH STANDARD DUTY; .275/.285 TOOTH WIDTH; USEWITH [202] STANDARD DUTY ROLLER CHAIN

S797 18 TEETH HEAVY DUTY; .40/.41 TOOTH WIDTH; USE WITH[506] HEAVY DUTY SILENT CHAIN

62 6.0 (364) OHV ENG - 1999-13 - 8 Cyl. - 4.00 Bore (GEN III,GEN IV VORTEC) (INCLUDES VANS)GAS,FLEX,ELECTRIC,CNG ENG.3pc Set 3-3SRH60S 2007-2010 INCLUDES [3SRH60], [S894] & [S827]; FOR USE

W/SINGLE BOLT CAMSHAFT 2007-09 TRAILBLAZER; 2008-10EXPRESS 2500-3500, SAVANA 2500-3500 (NON ACTUATORAPPLICATIONS)

3-3SRH60SA 1999-2006 INCLUDES [3SRH60], [S878] & [S827]; FOR USE W/3BOLT CAMSHAFT RELUCTOR STYLE CAM SPROCKET, HALFMOON HUB ON FACE

3-3SRH60SA 2007 INCLUDES [3SRH60], [S878] & [S827]; FOR USE W/3 BOLTCAMSHAFT EXPRESS 2500,3500 & SAVANA 2500,3500 ONLY(RELUCTOR STYLE CAM SPROCKET, HALF MOON HUB ONFACE)


RELUCTOR STYLE CAM SPROCKET, HALF MOON HUB ONFACE

S878 2007 44 TEETH; FOR USE W/3BOLT CAMSHAFT EXPRESS 2500-3500 & SAVANA 2500-3500 ONLY; RELUCTOR STYLE CAMSPROCKET, HALF MOON HUB ON FACE

S894 2007-2010 44 TEETH; FOR USE W/SINGLE BOLT CAM 2007-09TRAILBLAZER; 2008-10 EXPRESS 2500-3500, SAVANA 2500-3500 (NON ACTUATOR APPLICATIONS)


126


62 6.0 (364) OHV ENG - 1999-13 - 8 Cyl. - 4.00 Bore (GEN III,GEN IV VORTEC) (INCLUDES VANS)GAS,FLEX,ELECTRIC,CNG ENG. (Continued)Crank Sprocket S827 1999-2012 22 TEETH 22 TEETH EXC. 2012 EXPRESS 2500-

4500,SAVANA 2500-4500Chain Tensioner BT5490 2007-2009 TRAILBLAZER; W/SINGLE BOLT CAM; 4 SENSORSDamper BD417 2005-2006 SSRChain Damper AdapterBracket



63 6.0 (366) ENG - 1968-79 - 8 Cyl. - 3.94 Bore C SERIES,K SERIES,P SERIES,SUBURBAN3pc Set 3-171S 1969-1979 INCLUDES [168], [S394] & [S395]Chain 168 1969-1979 66 LINKSCam Sprocket S394 1969-1979 50 TEETHCrank Sprocket S395 1969-1979 25 TEETH

64 6.0 (366) ENG - 1980-98 - 8 Cyl. - 3 15/16 Bore (MEDIUM DUTY)3pc Set 3-171S 1980-1990 INCLUDES [168], [S394] & [S395]

3-4SR50 1991-1998 INCLUDES [4SR50], [S710] & [S717]Chain 168 1980-1990 66 LINKS

4SR50 1991-1998 50 LINKSCam Sprocket S394 1980-1990 50 TEETH


S717 1991-1998 19 TEETH65 370 ENG - 1957-59 - 8 Cyl. - 4.000 Bore (GMC ONLY)

Chain 162 64 LINKS66 6.2 (379) DIESEL ENG - 1982-93 - 8 Cyl. - 3.976 Bore (6.2-C 1982-93) (6.2-J 1982-93)


67 6.2-8 (378) OHV ENG - 2007-08 - V8 - 4.06 Bore (GEN IV VORTEC L92) (YUKON DENALI, SIERRA1500, YUKON XL1500 DENALI, SIERA 1500, TAHOE) GAS ENG3pc Set 3-3SRH60S 2007-2008 INCLUDES [3SRH60], [S894] & [S827]; FOR USE

W/SINGLE BOLT CAMSHAFT EXCLUDES YUKON, YUKON XL1500 (CAM SPROCKET IS PART OF ACTUATOR)

Chain 3SRH60 60 LINKSCam Sprocket S894 2007-2008 44 TEETH; FOR USE W/SINGLE BOLT CAM

EXCLUDES YUKON, YUKON XL 1500, TAHOE (CAM SPROCKETIS PART OF ACTUATOR)

Crank Sprocket S827 22 TEETH 22 TEETHChain Tensioner BT5490

68 6.2-2,F (376) OHV ENG - 2009-13 - V8 - 4.06 Bore (SILVERADO 1500,SIERRA 1500,SIERRADENALI,TAHOE,YUKON,YUKON XL 1500) 16V FLEX FUEL3pc Set 3-3SRH60S 2009-2012 INCLUDES [3SRH60], [S894] & [S827]; FOR USE

W/SINGLE BOLT CAMSHAFTChain 3SRH60 2009-2012 60 LINKSCam Sprocket S894 2009-2012 44 TEETH; FOR USE W/SINGLE BOLT CAMContinued on Next Page

127


68 6.2-2,F (376) OHV ENG - 2009-13 - V8 - 4.06 Bore (SILVERADO 1500,SIERRA 1500,SIERRADENALI,TAHOE,YUKON,YUKON XL 1500) 16V FLEX FUEL (Continued)Crank Sprocket S827 2009-2012 22 TEETH 22 TEETH

69 6.5 (395) DIESEL OHV ENG - 1992-02 - 8 Cyl. - 4.06 Bore (VIN F 1992-02 W/TURBO) (VIN P 1994-95W/O TURBO) (VIN S 1994-98 W/TURBO) (VIN Y 1994-99 W/O TURBO) (INCLUDES VANS)3pc Set 3-181S 1992-1993 INCLUDES [181], [S524] & [S375]

3-181SA 1994-2002 INCLUDES [181], [S807], [S524]Chain 181 48 LINKSCam Sprocket S524 36 TEETHCrank Sprocket S375 1992-1993 18 TEETH

S807 1994-2002 18 TEETH70 396 (400) ENG - 1968-70 - 8 Cyl. - 4 1/8 Bore






72 401 ENG - 1960-65 - V6 - 4 7/8 Bore (GMC ONLY)Crank Gear 2843 30 TEETHIdler Gear 2842 57 TEETH

73 401 ENG - 1966-72 - V6 - 4 7/8 Bore (CHEVY 1966-71) (GMC 1966-72)Crank Gear 2843 30 TEETHIdler Gear 2842 57 TEETH

74 402 (400) ENG - 1971-72 - 8 Cyl. - 4 1/8 Bore BIG BLOCK3pc Set 3-171S INCLUDES [168], [S394] & [S395] HEAVY DUTY



S394 50 TEETH HEAVY DUTYCrank Sprocket S393 19 TEETH STANDARD DUTY

S395 25 TEETH HEAVY DUTY75 409 ENG - 1962-65 - 8 Cyl. - 4 5/16 Bore (CHEVY ONLY)


76 7.0 (427) ENG - 1980-98 - 8 Cyl. - 4 1/4 Bore (B SERIES,C SERIES,P SERIES - TOPKICK,KODIAK)(MEDIUM DUTY)3pc Set 3-171S 1980-1990 INCLUDES [168], [S394] & [S395]

3-4SR50 1991-1998 INCLUDES [4SR50], [S710] & [S717]Chain 168 1980-1990 66 LINKS


S710 1991-1998 38 TEETHCrank Sprocket S395 1980-1990 25 TEETHContinued on Next Page

128


76 7.0 (427) ENG - 1980-98 - 8 Cyl. - 4 1/4 Bore (B SERIES,C SERIES,P SERIES - TOPKICK,KODIAK)(MEDIUM DUTY) (Continued)Crank Sprocket S717 1991-1998 19 TEETH

77 432 & 432M ENG - 1973-74 - V6 - 4 7/8 Bore (432 CHEVY ONLY) (432M CHEVY & GMC)Crank Gear 2843 30 TEETHIdler Gear 2842 57 TEETH

78 7.4 (454) OHV ENG - 1970-00 - 8 Cyl. - 4.25 Bore (CHEVY 1970-00) (GMC 1971-00) (INCLUDESVANS)3pc Set 3-171S 1971-1997 INCLUDES [168], [S394] & [S395] HEAVY DUTY

3-4SR50SA 1996-1999 INCLUDES [4SR50], [S831], [S806] STANDARD DUTY;VIN CODE J; 1999 W/PULL AHEAD DESIGN

3-4SR50SE 1999-2000 INCLUDES [4SR50], [S830], [S815] STANDARD DUTY;CODE J; W/OUT 1999 PULL AHEAD DESIGN

3-501S 1971-1987 INCLUDES [501], [S392] & [S393] STANDARD DUTY3-507S 1988-1995 INCLUDES [507], [S392] & [S393] STANDARD DUTY

Chain 168 1971-1997 66 LINKS HEAVY DUTY4SR50 1996-2000 50 LINKS STANDARD DUTY ; VIN CODES B,J501 1971-1987 50 LINKS STANDARD DUTY507 1988-1996 50 LINKS STANDARD DUTY ; EXCLUDING 1996 VIN J

Cam Sprocket S392 1971-1995 38 TEETH STANDARD DUTYS394 50 TEETH HEAVY DUTYS806 1996-1999 38 TEETH .453" TOOTH WIDTH VIN CODE J (1999

W/PULL AHEAD DESIGN)S830 1998-2000 38 TEETH .464" TOOTH WIDTH VIN CODES B,J (VIN

J 1999 W/O ZK3 PULL AHEAD DESIGN)Crank Sprocket S393 1971-1995 19 TEETH STANDARD DUTY

S395 25 TEETH HEAVY DUTYS815 1999-2000 19 TEETH .464" THICKNESS VIN CODE J (W/OUT

1999 PULL AHEAD DESIGN)S831 1996-1999 19 TEETH .453" THICKNESS VIN CODE J (1999

W/PULL AHEAD DESIGN)79 478,478M ENG - 1962-74 - V6 - 5 1/8 Bore (478 1962-65) (478M 1966-74)

Crank Gear 2843 30 TEETHIdler Gear 2842 57 TEETH

80 D478,DH478 DIESEL ENG - 1965-74 - V6 - 5 1/8 BoreCrank Gear 2847 34 TEETH

81 8.1-G (496) OHV ENG - 2001-07 - V8 - 4.25 Bore (VORTEC) INCLUDES VANS3pc Set 3-4SR50SB 2001 INCLUDES [4SR50], [S834] & [S837]

3-4SR50SC 2002-2003 INCLUDES [4SR50], [S842] & [S837]3-4SR50SD 2004-2007 INCLUDES [4SR50], [S892] & [S837]

Chain 4SR50 50 LINKSCam Sprocket S834 2001 38 TEETH

S842 2002-2003 38 TEETHS892 2004-2007 38 TEETH

Crank Sprocket S837 19 TEETH82 8.1-E,G (496) OHV ENG - 2001-09 - 8 Cyl. - 4.25 Bore (C-SERIES KODIAK,TOPKICK, B7) (VORTEC)

MEDIUM DUTY3pc Set 3-4SR50SB 2001 INCLUDES [4SR50], [S834] & [S837] C3500HD

3-4SR50SC 2002 INCLUDES [4SR50], [S842] & [S837] C3500HDChain 4SR50 2001-2002 50 LINKS C3500HDCam Sprocket S834 2001 38 TEETH C3500HD

S842 2002 38 TEETH C3500HDContinued on Next Page

129


82 8.1-E,G (496) OHV ENG - 2001-09 - 8 Cyl. - 4.25 Bore (C-SERIES KODIAK,TOPKICK, B7) (VORTEC)MEDIUM DUTY (Continued)Crank Sprocket S837 2001-2002 19 TEETH C3500HD

83 637 ENG - 1970-72 - 8 Cyl. - 5 1/8 Bore (SERIES 90)Crank Gear 2847 34 TEETHIdler Gear 2845 51 TEETH

84 702 ENG - 1960-65 - 12 Cyl - 4 9/16 Bore (GMC ONLY)Crank Gear 2843 30 TEETHIdler Gear 2842 57 TEETH

HENRY-JEngine Year Line Engine Year Line Engine Year Line

4 Cyl.ALL 4 CYL 1951-54 1LineNo. Part Title Part No Description

1 ALL 4 CYL ENG - 1951-54 - 4 Cyl. - 3 1/8 BoreCam Gear 2900 56 TEETH FIBERCrank Gear 2901 28 TEETH

HERCULESEngine Year Line Engine Year Line Engine Year Line

4 Cyl.JX4 SERIES 16 Cyl.JXA,B,C,D,G 2

6 Cyl. (Continued)

JXE3 34 Cyl.OOA,OOB,OOC 4

6 Cyl.QXA,B,C,D,QXLD 3 & 5 5


1 JX4 SERIES ENG - 4 Cyl. (EXC. HYD. PUMP)Crank Gear 3033 25 TEETH

2 JXA,B,C,D,G ENG - 6 Cyl. - 3 3/8 BoreCrank Gear 3033 25 TEETH

3 JXE3 ENG - 6 Cyl.Crank Gear 3033 25 TEETH

4 OOA,OOB,OOC ENG - 4 Cyl. - 3 1/2 BoreCrank Gear 3033 25 TEETH

130

HONDAEngine Year Line Engine Year Line Engine Year Line

4 Cyl.1.3 (1335CC) 1980-83 11.3 (1342CC) SOHC 1984-87 21.5 (1487CC) SOHC 1975-79 31.5 (1487CC) SOHC 1981-84 41.5 (1478CC) SOHC 1985-86 51.5 (1487CC) SOHC 1987 61.5 (1493CC) SOHC 1988-95 71.5 (1493CC) SOHC 1990-95 81.6 (1590CC)SOHC 1988-95 91.6 (1590CC) 1994-95 101.6 (1590CC) 1996-00 111.6 (1595CC) 1994-00 121.6 (1599CC) 1976-78 13

4 Cyl. (Continued)

1.7 (1668,1700CC) 2001-05 141.8 (1751CC) 1979-83 151.8 (1829CC) 1983-86 161.8 (1829CC) 1984-85 171.8 (1829CC) 1987 182.0 (1955CC)SOHC 1986-89 192.0 (1958CC) 1988-90 202.0 (1958CC) 1988-91 212.0 (1972CC) 1997-01 222.1 (2056CC) 1990-91 232.2 (2156CC) SOHC 1990-97 242.2 (2156CC) 1994-97 252.2 (2156CC) 1993-01 26

4 Cyl. (Continued)

2.3 (2234CC) 1998 272.3 (2254CC) 1998-02 282.3 (2259CC) 1992-96 292.4 (2354CC) 2002-14 302.6 (2556CC) 1994-96 316 Cyl.2.7 (2675CC) 1995-97 323.0 (2977,2997CC) 1998-07 333.2-V (3165CC) 1994-97 343.2-W (3165CC) 1998-02 353.5 (3471CC) ENG 2005-13 363.5 (3474CC) 1999-04 37


1 1.3 (1335CC) ENG - 1980-83 - 4 Cyl. - 2.84 Bore (EJ1-CIVIC) (SOHC)Belt B-073 92 TEETHCrank Sprocket S523 20 TEETHBelt Tensioner BT21

2 1.3 (1342CC) SOHC ENG - 1984-87 - 4 Cyl. - 74.0 MM Bore (CIVIC BASE,CIVIC CRX,CIVIC DX)(SOHC)Belt B-0161 1986-1987 101 TEETH

B-099 1984-1985 101 TEETHBelt Tensioner BT116

3 1.5 (1487CC) SOHC ENG - 1975-79 - 4 Cyl. - 74.0 MM Bore (ED1 CIVIC CVCC 1975) (ED2,ED4CIVIC CVCC 1975-76) (ED3 CIVIC CVCC 1976-79) 12V (SOHC)Timing Kit B-041-1B 1976-1979 KIT INCLUDES [B-041], [S590], [S523], [BT21]Belt B-036 1975 94 TEETH

B-041 1976-1979 95 TEETHCrank Sprocket S523 20 TEETHBelt Tensioner BT21

4 1.5 (1487CC) SOHC ENG - 1981-84 - 4 Cyl. - 74.0 MM Bore (EM1,EW1) (CIVIC,WAGOVAN) 8V(SOHC)Timing Kit B-041-1B 1981-1983 KIT INCLUDES [B-041], [S590], [S523], [BT21]Belt B-041 1981-1983 95 TEETH

B-099 1984 101 TEETHCrank Sprocket S523 1981-1983 20 TEETHBelt Tensioner BT116 1984

BT21 1981-19835 1.5 (1487CC) SOHC ENG - 1985-86 - 4 Cyl. - 74.0 MM Bore (CIVIC CRX SI, CIVIC SI) 8V MFI

Belt B-0161 1986 101 TEETHB-099 1985 101 TEETH

Belt Tensioner BT1166 1.5 (1487CC) SOHC ENG - 1987 - 4 Cyl. - 74.0 MM Bore (CIVIC CRX, CRX HF, WAGOVAN D15A2)

12VBelt B-0161 101 TEETHBelt Tensioner BT116

7 1.5 (1493CC) SOHC ENG - 1988-95 - 4 Cyl. - 75.0 MM Bore (D15B2 CIVIC 1988-91, CRX 1988-91)(D15B7 CIVIC 1992-95) (D15Z1 CIVIC VX VTEC 1992-95) 16V ENG.Belt B-0143 106 TEETH EXC. D15Z1 ENG.

B-0223 1992-1995 103 TEETH D15Z1 ENG. ONLYBelt Tensioner BT162 EXC. D15Z1 ENG.

131

HONDA (Continued)LineNo. Part Title Part No Description

8 1.5 (1493CC) SOHC ENG - 1990-95 - 4 Cyl. - 75.0 MM Bore (D15B6 CRX HF 1990-91) (D15B7 CIVICDEL SOL S 1993-95) (D15B8 CIVIC CX 1992-95) 8V ENG.Belt B-0143 106 TEETHBelt Tensioner BT162

9 1.6 (1590CC) ENG - 1988-95 - 4 Cyl. - 75.0 MM Bore (D16A6 CIVIC 1988-91)(D16A6 CRX 1988-91)(D16Z6 CIVIC 1992-95)(D16Z6 CIVIC DEL SOL SI VTEC 1993-95 SOHCBelt B-0145 1988-1991 107 TEETH


10 1.6 (1590CC) ENG - 1994-95 - 4 Cyl. - 75.0 MM Bore (B16A3 CIVIC DEL SOL VTEC) (DOHC)Belt B-0227 124 TEETHBelt Tensioner BT5262

11 1.6 (1590CC) ENG - 1996-00 - 4 Cyl. - 2.95 Bore (1996-00 D16Y7 CIVIC & DEL SOL) (1996-00 D16Y8CIVIC & DEL SOL VTEC) (1996-00 D16Y5 CIVIC VTEC) (SOHC)Belt B-0224 104 TEETH

12 1.6 (1595CC) ENG - 1994-00 - 4 Cyl. - 2.95 Bore (B16A2 CIVIC, CIVIC DEL SOL VTEC) (DOHC)Belt B-0227 124 TEETHBelt Tensioner BT5262 INTERFERENCE ENGINE APPLICATION

13 1.6 (1599CC) ENG - 1976-78 - 4 Cyl. - 2.910 Bore (EF1-ACCORD) (SOHC)Belt B-041 95 TEETHCrank Sprocket S523 20 TEETHBelt Tensioner BT21

14 1.7 (1668,1700CC) ENG - 2001-05 - 4 Cyl. - 2.95 Bore (D17A1 CIVIC DX,LX) (D17A2 CIVIC EX VTEC)(D17A6 CIVIC HX VTEC-E) (D17A7 CIVIC GX) (SOHC)Belt B-0312 104 TEETHBelt Tensioner BT5451 INCLUDES SPRING

15 1.8 (1751CC) ENG - 1979-83 - 4 Cyl. - 3.031 Bore (EK1-ACCORD 1979-83) (PRELUDE 1979-82)(SOHC)Belt B-041 95 TEETHCrank Sprocket S523 20 TEETHBelt Tensioner BT93

16 1.8 (1829CC) ENG - 1983-86 - 4 Cyl. - 80.7 MM Bore ET2 PRELUDE (SOHC) W/8V ENG.Belt B-0160 1986 108 TEETH


BT115 198317 1.8 (1829CC) ENG - 1984-86 - 4 Cyl. - 80.0 MM Bore ES2 ACCORD (SOHC) W/12V ENG.


18 1.8 (1829CC) ENG - 1987 - 4 Cyl. - 80.7 MM Bore A18A1 PRELUDE (SOHC) W/12V ENG.Belt B-0160 108 TEETHBelt Tensioner BT113

19 2.0 (1955CC) ENG SOHC - 1986-89 - 4 Cyl. - 86.5 MM Bore (BT 1986 ACCORD LXI) (BS 1986ACCORD DX,LX,LXi)(A20A1 1987-89 ACCORD DX, LX)(A20A3 1987-89 ACCORD LXi, SEI)(1986-87PRELUDE 2.0 SI) (SOHC)Belt B-0160 108 TEETHBelt Tensioner BT113

20 2.0 (1958CC) ENG - 1988-90 - 4 Cyl. - 3.25 Bore (B20A3 PRELUDE S) (SOHC)Belt B-0144 107 TEETHBelt Tensioner BT202

132


21 2.0 (1958CC) ENG - 1988-91 - 4 Cyl. - 3.19 Bore (B20A5 PRELUDE SI) (DOHC)Belt B-0142 124 TEETHBelt Tensioner BT202

22 2.0 (1972CC) ENG - 1997-01 - 4 Cyl. - 3.31 Bore (1997-98 B20B4, 1999-01 B20Z2 CR-V TRUCK)(DOHC)Belt B-0184 125 TEETHBelt Tensioner BT5262 INTERFERENCE ENGINE APPLICATION

23 2.1 (2056CC) ENG - 1990-91 - 4 Cyl. - 83.0 MM Bore (B21A1 PRELUDE) (DOHC)Belt B-0142 124 TEETHBelt Tensioner BT202

24 2.2 (2156CC) ENG - 1990-97 - 4 Cyl. - 85.0 MM Bore (F22A1 1990-96 ACCORD, 1992-96 PRELUDE)(F22A4 1990-91 ACCORD) (F22A6 1991-93 ACCORD) (F22B2 1994-97 ACCORD) (F22B6 1995-97ODYSSEY) NON VTEC (SOHC)Belt B-0186 70 TEETH BALANCE SHAFT BELT; INTERFERENCE ENG.

APPLICATIONB-0187 113 TEETH CAMSHAFT BELT

Belt Tensioner BT203 CAMSHAFT BELT25 2.2 (2156CC) ENG - 1994-97 - 4 Cyl. - 85.0 MM Bore ACCORD EX,EX-R (SOHC) (F22B1 VTEC)

Belt B-0186 70 TEETH (BALANCE SHAFT) INTERFERENCE ENG.APPLICATION

B-0244 112 TEETH (CAMSHAFT) INTERFERENCE ENGINEAPPLICATION

Belt Tensioner BT203 CAMSHAFT26 2.2 (2156CC) ENG - 1993-01 - 4 Cyl. - 85.0,87.0 MM Bore Bore (H22A1 PRELUDE VTEC 1993-96)

(H22A4 PRELUDE BASE, TYPE SH 1997-01) (DOHC) VTECBelt B-0186 70 TEETH BALANCE SHAFT BELT

B-0226 155 TEETH CAMSHAFT BELTBelt Tensioner BT5450 BAL. SHAFT BELT; TENSIONERIdler BT5448 CAMSHAFT BELT; RIGHT HAND IDLER

27 2.3 (2234CC) ENG - 1998 - 4 Cyl. - 86.0 MM Bore (F23A7 ODYSSEY) (SOHC)Belt B-0186 70 TEETH BALANCE SHAFT BELT; INTERFERENCE ENG.


APPLICATIONBelt Tensioner BT203 CAMSHAFT BELT TENSIONER

28 2.3 (2254CC) ENG - 1998-02 - 4 Cyl. - 86.0 MM Bore (F23A1,F23A4,F23A5 ACCORD 2DR,4DRVTEC) (SOHC)Belt B-0186 70 TEETH BALANCE SHAFT BELT; INTERFERENCE ENG.



29 2.3 (2259CC) ENG - 1992-96 - 4 Cyl. - 3.43 Bore (H23A1 PRELUDE SI, SE,SI 4WS) (DOHC)Belt B-0186 70 TEETH (BALANCE SHAFT) INTERFERENCE ENG.

APPLICATIONB-0216 127 TEETH (CAMSHAFT) INTERFERENCE ENG. APPLICATION

Belt Tensioner BT203 CAMSHAFT

133


30 2.4 (2354CC) ENG - 2002-14 - 4 Cyl. - 87.0 Bore (ACCORD, CIVIC, CR-V, CROSSTOUR, ELEMENT)(DOHC) 16V GAS VTEC, i-VTECTiming Kit 3-711S 2002-2011 KIT INCLUDES [711F], [712F], [S937], [S939], [S940],

[BG5570], [BG5571], [BG5572], [BT5569], [BT5573], [BT5574](DOES NOT CONTAIN INTAKE CAM SPROCKET) 2003-07ACCORD, 2002-09 CR-V, 2003-11 ELEMENT

Chain 711F 2002-2011 176 LINKS 2003-07 ACCORD, 2002-09 CR-V, 2003-11ELEMENT; TIMING CHAIN

712F 2002-2011 62 LINKS 2003-07 ACCORD, 2002-09 CR-V, 2003-11ELEMENT; OIL PUMP & BALANCE SHAFT CHAIN

Cam Sprocket S940 2002-2012 46 TEETH 2003-12 ACCORD, 2002-11 CR-V, 2003-11ELEMENT; EXHAUST ONLY

Crank Sprocket S937 2002-2012 23 / 34 TEETH 2003-12 ACCORD, 2002-12 CR-V, 2003-11 ELEMENT

Balance Shaft Sprocket S939 2002-2012 17 TEETH 2003-12 ACCORD, 2002-12 CR-V, 2003-11ELEMENT

Chain Tensioner BT5569 2002-2011 2003-07 ACCORD, 2002-09 CR-V, 2003-11 ELEMENT;BALANCE SHAFT CHAIN TENSIONER; LOWER

BT5573 2002-2011 2003-07 ACCORD, 2002-09 CR-V, 2003-11 ELEMENT;TIMING CHAIN TENSIONER ARM

BT5574 2002-2011 2003-07 ACCORD, 2002-09 CR-V, 2003-11 ELEMENT;TIMING CHAIN TENSIONER; RIGHT HAND

Chain Guide BG5570 2002-2012 2003-12 ACCORD, 2002-12 CR-V, 2003-11 ELEMENT;BALANCE SHAFT CHAIN GUIDE; LOWER LEFT HAND

BG5571 2002-2012 2003-12 ACCORD, 2002-12 CR-V, 2003-11 ELEMENT;TIMING CHAIN GUIDE; UPPER

BG5572 2002-2012 2003-12 ACCORD, 2002-12 CR-V, 2003-11 ELEMENT;TIMING CHAIN GUIDE; UPPER LEFT HAND

31 2.6 (2556CC) ENG - 1994-96 - 4 Cyl. - 3.65 Bore (PASSPORT) (SOHC 4ZE1 ISUZU ENG)Belt B-0147 137 TEETH

32 2.7 (2675CC) ENG - 1995-97 - V6 - 87.0 MM Bore (C27A4 ACCORD) (SOHC)Belt B-0263 192 TEETH

33 3.0 (2977,2997CC) ENG - 1998-07 - V6 - 3.38 Bore (J30A1 ACCORD 1998-02) (J30A4 ACCORD2003-05) (J30A5 ACCORD 2006-07) (SOHC) VTECBelt B-0286 1998-2002 197 TEETH J30A1 ENG

B-0329 2003-2006 197 TEETH J30A4, J30A5 ENG, INTERFERENCEENGINE APPLICATION

34 3.2-V (3165CC) ENG - 1994-97 - V6 - 91.4 MM Bore (PASSPORT) (SOHC 6VD1 ISUZU ENG)Belt B-0221 223 TEETH

35 3.2-W (3165CC) ENG - 1998-02 - V6 - 3.68 Bore (PASSPORT) (DOHC 6VD1 ISUZU ENG)Belt B-0303 191 TEETH

36 3.5 (3471CC) ENG - 2005-13 - V6 - 89.0 MM Bore (J35A6,A7,A8,A9,J35Y1,J35Z1,Z2,Z3,Z4,Z5ACCORD,CROSSTOUR,ODYSSEY,PILOT,RIDGELINE) (SOHC) 24V GAS VTEC,i-VTECBelt B-0329 2005-2010 197 TEETH INTERFERENCE ENGINE APPLICATION

37 3.5 (3474CC) ENG - 1999-04 - V6 - 3.54 Bore (1999-04 ODYSSEY VAN, 2003-04 PILOT TRUCK)J35A1, A4 (SOHC)Belt B-0286 1999-2004 197 TEETH

134

HUMMEREngine Year Line Engine Year Line Engine Year Line

5 Cyl.3.5-6 (211) DOHC 2006 13.7-E (223) DOHC 2007-10 2

8 Cyl.5.3-L,P (325) OHV 2008-10 36.0-U (364) OHV 2003-07 4

8 Cyl. (Continued)

6.2-2,8 (378) OHV 2008-09 5


1 3.5-6 (211) DOHC ENG - 2006 - 5 Cyl. - 3.66 Bore H3 (GM ENG)Timing Kit 3-195SC INCLUDES [195P], [728FP], [S908AP], [S913P], [BT5511P],






2 3.7-E (223) DOHC ENG - 2007-10 - 5 Cyl - 3.76 Bore H3,H3-T (GM ENG)Timing Kit 3-195SA 2007-2009 INCLUDES [195], [728F], [S908A], [S913], [BT5511],

[BT5512], [BG5504], [BG5510], [BG6006], [BG6007]Chain 195 2007-2009 168 LINKS TIMING CHAIN

728F 2007-2009 110 LINKS BALANCE SHAFT CHAINCam Sprocket S908A 2007-2009 58 TEETHCrank Sprocket S913 2007-2009 29 TEETHChain Tensioner BT5511 2007-2009 REPLACES 1ST DESIGN SPRING TYPE TENSIONER;


BT5512 2007-2009 TIMING CHAIN TENSIONERChain Guide BG5504 2007-2009 TIMING CHAIN GUIDE; R.H.

BG5510 2007-2009 TIMING CHAIN GUIDE; L.H.BG6006 2007-2009 TIMING CHAIN GUIDE; UPPERBG6007 2007-2009 BALANCE SHAFT CHAIN GUIDE

3 5.3-L,P (325) OHV ENG - 2008-10 - 8 Cyl. - 3.78 Bore H3 (GM VORTEC) (P FLEX)3pc Set 3-3SRH60S 2008-2009 INCLUDES [3SRH60], [S894] & [S827]; FOR USE

W/SINGLE BOLT CAMSHAFTChain 3SRH60 60 LINKSCam Sprocket S894 2008-2009 44 TEETH; FOR USE W/SINGLE BOLT CAMCrank Sprocket S827 22 TEETH 22 TEETHChain Tensioner BT5490 2008-2009

4 6.0-U (364) OHV ENG - 2003-07 - 8 Cyl. - 4.00 Bore H2 (GM VORTEC)3pc Set 3-3SRH60SA INCLUDES [3SRH60], [S878] & [S827]; FOR USE W/3 BOLT

CAMSHAFTChain 3SRH60 60 LINKSCam Sprocket S878 44 TEETH; FOR USE W/3BOLT CAMSHAFT RELUCTOR STYLE

CAM SPROCKET, HALF MOON HUB ON SPROCKET. MUST BEUSED WITH [3SRH60] CHAIN

Crank Sprocket S827 22 TEETH 22 TEETHContinued on Next Page

135

HUMMER (Continued)LineNo. Part Title Part No Description

4 6.0-U (364) OHV ENG - 2003-07 - 8 Cyl. - 4.00 Bore H2 (GM VORTEC) (Continued)Chain Damper AdapterBracket



5 6.2-2,8 (378) OHV ENG - 2008-09 - 8 Cyl. - 4.06 Bore H2 (GM VORTEC)Chain 3SRH60 60 LINKSCrank Sprocket S827 22 TEETH 22 TEETH

HYUNDAIEngine Year Line Engine Year Line Engine Year Line

4 Cyl.1.5-J (1468CC) SOHC 1986-94 11.5-J (1495CC) SOHC 1993-95 21.5-N (1495CC) SOHC 1995-03 31.6-R (1596CC) DOHC 1992-95 41.6-C (1599CC) DOHC 2006-11 51.6-C,N (1600CC) DOHC 2001-05 6

4 Cyl. (Continued)

1.8-M (1796CC) DOHC 1996-98 71.8-M (1836CC) DOHC 1993-95 72.0-F (1997CC) DOHC 1992-01 82.4-S (2351CC) DOHC 1999-06 92.4-S (2351CC) SOHC 1989-91 102.4 (2359CC) DOHC 2006-13 11

6 Cyl.2.5-V (2493CC) DOHC 1999-01 122.7-D,F (2656CC) DOHC 2001-09 133.0-T (2972CC) SOHC 1990-98 143.5 (3467CC) DOHC 2002-06 15


1 1.5-J (1468CC) SOHC ENG - 1986-94 - 4 Cyl. - 75.5 MM Bore (EXCELL GL,GLS,GS,LS 1986-94)(SCOUPE 1991-94) 8 VALVE MITSUBISHI ENGINEBelt B-0128 1990-1994 92 TEETH


2 1.5-J (1495CC) SOHC ENG - 1993-95 - 4 Cyl. - 75.5 MM Bore (SCOUPE) 8 VALVE MITSUBISHIENGINEBelt B-0191 1994 92 TEETH

3 1.5-N (1495CC) SOHC ENG - 1995-03 - 4 Cyl. - 75.5 MM Bore ACCENT 12 VALVE G4EKBelt B-0191 1995-1999 92 TEETH

4 1.6-R (1596CC) DOHC ENG - 1992-95 - 4 Cyl. - 75.5 MM Bore (ELANTRA GL,GLS) 16 VALVE G4CRMITSIBUSHI ENGINEBelt B-0165 151 TEETH CAMSHAFT BELT; INTERFERENCE ENG.


APPLICATIONBelt Tensioner BT194 RIGHT HAND; IDLER

BT197 BALANCE SHAFT BELT TENSIONERBT225 CAMSHAFT BELT; ADJUSTER

5 1.6-C (1599CC) DOHC ENG - 2006-11 - 4 Cyl. - 76.5 MM Bore (ACCENT) 16VBelt B-0282 2006-2007 105 TEETH

6 1.6-C,N (1600CC) DOHC ENG - 2001-05 - 4 Cyl. - 75.5 Bore (ACCENT GL,GS) 16 VALVE ENGINEBelt B-0282 105 TEETH

7 1.8-M (1836CC) DOHC ENG - 1993-95 - 4 Cyl. - 81.5 MM Bore (ELANTRA) G4CNBelt B-0167 153 TEETH CAMSHAFT BELT; INTERFERENCE ENG.

APPLICATIONContinued on Next Page

136

HYUNDAI (Continued)LineNo. Part Title Part No Description

7 1.8-M (1836CC) DOHC ENG - 1993-95 - 4 Cyl. - 81.5 MM Bore (ELANTRA) G4CN (Continued)Belt B-0168 65 TEETH BALANCE SHAFT BELT; INTERFERENCE ENG.

APPLICATIONBelt Tensioner BT194 RIGHT HAND; CAMSHAFT BELT ADJUSTER

BT197 BALANCE SHAFT BELT TENSIONERBT225 CAMSHAFT BELT ADJUSTER

8 2.0-F (1997CC) DOHC ENG - 1992-01 - 4 Cyl. - 82 MM Bore (SONATA 1992-98) (TIBURON 1998-01)G4CP ENGINEBelt B-0167 153 TEETH CAMSHAFT

B-0168 65 TEETH BAL. SHAFTBelt Tensioner BT194 1992-1998 RIGHT HAND; CAMSHAFT BELT IDLER

BT197 1992 To 9/1995 BALANCE SHAFTBT225 1992 To 9/1995

9 2.4-S (2351CC) DOHC ENG - 1999-06 - 4 Cyl. - 86.5 MM Bore (SONATA, SANTA FE)Belt B-0313 175 TEETH CAMSHAFT BELT; INTERFERENCE ENGINE


APPLICATION10 2.4-S (2351CC) SOHC ENG - 1989-91 - 4 Cyl. - 86.5 MM Bore (SONATA GL,GLS) MITSUBISHI

ENGINEBelt B-0124 1989-1991 123 TEETH CAMSHAFT BELTBelt Tensioner BT105 CAMSHAFT BELT TENSIONER

BT161 BALANCE SHAFT BELT TENSIONER11 2.4 (2359CC) DOHC ENG - 2006-13 - 4 Cyl. - 88.00 MM Bore (SANTA FE,SONATA,TUSCON) 16V

THETA II-PZEV,ULEV (GAS/ELECTRIC)Timing Kit 3-900CS 2006-2007 KIT INCLUDES [900C], [901C], [S926], [S931], [S933],

[BT5557], [BT5559], [BT5560], [BT5563], [BG5558], [BG5561]SONATA

3-900CSA 2008-2011 KIT INCLUDES [900C], [901C], [S931], [S933],[BT5557], [BT5559], [BT5560], [BT5563], [BG5558], [BG5561]NOTE; DOES NOT INCLUDE CAM SPROCKET EXC. 2011 SANTAFE & SONATA

Chain 900C 2006-2011 90 LINKS TIMING CHAIN; EXC. 2011 SONATA &SANTA FE

901C 2006-2011 37 LINKS OIL PUMP CHAIN; EXC. 2011 SONATA &SANTA FE

Cam Sprocket S926 2006-2007 54 TEETH FRONT RIGHT; SONATACrank Sprocket S931 2006-2011 27 TEETH OUTER; EXC. 2011 SONATA & SANTA FE

S933 2006-2011 30 TEETH INNER; EXC. 2011 SONATA & SANTA FEChain Tensioner BT5557 2006-2011 RIGHT HAND UPPER PRIMARY TIMING CHAIN

TENSIONER ARM; EXC. 2011 SONATA & SANTA FEBT5559 2006-2011 RIGHT HAND UPPER PRIMARY TIMING CHAIN

TENSIONER; EXC. 2011 SONATA & SANTA FEBT5560 2006-2011 LEFT HAND LOWER OIL PUMP CHAIN TENSIONER

ARM; EXC. 2011 SONATA & SANTA FEBT5563 2006-2011 LEFT HAND LOWER OIL PUMP CHAIN TENSIONER;

EXC. 2011 SONATA & SANTA FEChain Guide BG5558 2006-2011 LEFT HAND UPPER PRIMARY TIMING CHAIN GUIDE;

EXC. 2011 SONATA & SANTA FEBG5561 2006-2011 RIGHT HAND LOWER OIL PUMP CHAIN GUIDE; EXC.

2011 SONATA & SANTA FE

137

HYUNDAI (Continued)LineNo. Part Title Part No Description

12 2.5-V (2493CC) DOHC ENG - 1999-01 - V6 - 80 MM Bore (SONATA GLS) G6BWBelt B-0315 207 TEETH INTERFERENCE ENGINE APPLICATION

13 2.7-D,F (2656CC) DOHC ENG - 2001-09 - 6 Cyl. 86.7 MM Bore (TIBURON 2003-08) (TUSCON2005-09) (SANTA FE 2001-09) (SONATA 2002-05)Belt B-0315 207 TEETH INTERFERENCE ENGINE APPLICATION

14 3.0-T (2972CC) SOHC ENG - 1990-98 - V6 - 91.1 MM Bore (SONATA GL,GLS) MITSUBISHI ENGINEBelt B-0139 1990-1992 149 TEETH CAMSHAFT BELT

B-0139 1993-1998 149 TEETH CAMSHAFT BELT; INTERFERENCE ENG.APPLICATION

Belt Tensioner BT195 CAMSHAFT BELT TENSIONER15 3.5 (3467CC) DOHC ENG - 2002-06 - 6 Cyl - 93.0 MM Bore (SANTA FE 2003-06) (XG350 2002-05)

Belt B-0323 259 TEETH CAMSHAFT BELT; INTERFERENCE ENG.APPLICATION

Belt Tensioner BT271 TENSIONER PULLEYIdler BT227 IDLER PULLEY

I.H.C. TRACTOR & POWER UNITSEngine Year Line Engine Year Line Engine Year Line

4 Cyl.C113 1C123 1C135 1C146 1C153 1

4 Cyl. (Continued)

D166 DIESEL 1D188 DIESEL 1C248 1C264 1C281 1

8 Cyl.V304 1V345 2


1 V304 ENG - 8 Cyl. - 3 7/8 Bore (815)Gear Set 3336S SET INCLUDES (1) [3316] CAM GEAR, (1) [3318] CRANK GEAR;

MUST REPLACE AS A SET ONLY2 V345 ENG - 8 Cyl. - 3 7/8 Bore (815,915)

Gear Set 3336S SET INCLUDES (1) [3316] CAM GEAR, (1) [3318] CRANK GEAR;MUST REPLACE AS A SET ONLY

I.H.C. TRUCK


1 2.5 4-152,4-152T ENG - 4 Cyl. - 3.88 Bore (MODEL SCOUT,900A,C,CM,M SERIES VAN,M800,M800POST OFFICE, M1100)

Engine Year Line Engine Year Line Engine Year Line4 Cyl.2.5 4-152,4-152T 1961-71 13.2 OHV 1966-74 26 Cyl.3.8 6-232 1969-71 34.2 6-258 1973-74 48 Cyl.4.4 V266 1965-70 55.0 V304,V304E 1961-80 65.6 (345) 1967-80 75.7 V345 MEDIUM DUTY 1980-85 8

8 Cyl. (Continued)

6.4 (392) 1972-75 8V400 1974 96.6 (404) MV404 MEDIUMDUTY

1980 10

6.8 (420) MEDIUM DUTYDIESEL

1984-91 11

7.3-AB (444) MEDIUMDUTY DIESEL

1988-04 12

7.3 (446) MV446 MEDIUMDUTY

1980 13

6 Cyl.7.6-AA (466) MEDIUMDUTY DIESEL

1990-12 14

RD 501 158 Cyl.8.8 (537) V537 MEDIUMDUTY

1980 16

DV550,DV550B DIESEL 17


138

I.H.C. TRUCK (Continued)LineNo. Part Title Part No Description

2 3.2 OHV ENG - 1966-74 - 4 Cyl. - 4.13 Bore (SCOUT, SCOUT II) (M800, M1100, M1200, MA1200)4-196, 4-196E ENG.Gear Set 3336S SET INCLUDES (1) [3316] CAM GEAR, (1) [3318] CRANK GEAR;

MUST REPLACE AS A SET ONLY3 3.8 6-232 ENG - 6 Cyl. - 3 3/4 Bore (MODEL SCOUT II, M800, M800 NAVY, M800 POST OFFICE,

MA1200, M1100,1200 & 1300, 1000B,C & D, 1010, 1100B,C,D)3pc Set 3-494S INCLUDES [494], [S388] & [S355]Chain 494 48 LINKSCam Sprocket S388 36 TEETH STEELCrank Sprocket S355 18 TEETH

4 4.2 6-258 ENG - 6 Cyl. - 3 3/4 Bore (MODEL SCOUT II, 100 & 200 SERIES)3pc Set 3-494S INCLUDES [494], [S388] & [S355]Chain 494 48 LINKSCam Sprocket S388 36 TEETH STEELCrank Sprocket S355 18 TEETH

5 4.4 V266 ENG - 1965-70 - 8 Cyl. - 3 5/8 Bore (MODELSCOUT,M1200,MA1200,908B,908C,1000B,1000C,1000D,1100C,1100D,1200B,1200C,1200D,1300B,13-00C,1300D) INCLUDES VANSGear Set 3336S SET INCLUDES (1) [3316] CAM GEAR, (1) [3318] CRANK GEAR;

MUST REPLACE AS A SET ONLY6 5.0 V304,V304E ENG - 1961-80 - 8 Cyl. - 3.88 Bore (V304,V304E ENG.) INCLUDES VANS


7 5.6 (V345.V345E) ENG - 3.88 Bore (SCOUTII,TRAVELALL,100,1000,1010,1100,1110,1200,1210,1300,1310,150,200,DM10,MS,MS1210 SERIES)GAS/LPGGear Set 3336S SET INCLUDES (1) [3316] CAM GEAR, (1) [3318] CRANK GEAR;

MUST REPLACE AS A SET ONLY8 6.4 (392) ENG - 8 Cyl. - 4 1/8 Bore (MODEL SCOUT,TRAVELALL,MS,100,150,200,1010,1110,1210,

1310)Gear Set 3336S SET INCLUDES (1) [3316] CAM GEAR, (1) [3318] CRANK GEAR;

MUST REPLACE AS A SET ONLY9 V400 ENG - 8 Cyl. - 4.17 Bore


10 6.6 (404) MV404 MEDIUM DUTY ENG - 8 Cyl. - 4 1/8 Bore (MODELCARGOSTAR,S1723,S1724,S1823,S1824,S1924,S1925) MEDIUM DUTY GAS ENG.Gear Set 3335S INCLUDES [3334] & [3329A]

11 6.8 (420) MEDIUM DUTY DIESEL ENG - 8 Cyl. - 4.110 Bore (MODEL1452SC,1652SC,1652UPS,3700,3800,CARGOSTAR,F1954,G1954,M1400 MERTO II,M1600 METROII,S1654,S1753,S1853) MEDIUM DUTY TURBO DIESELCam Gear 3342 106 TEETHCrank Gear 3341 53 TEETH

12 7.3-AB (444) T444E MEDIUM DUTY DIESEL ENG - 1988-04 - 8 Cyl. - 4.110 Bore (ENG CODE T444E)MEDIUM DUTY TURBO DIESELCam Gear 3342 1988-1994 106 TEETH EXC. 1994 D.I. TURBOCrank Gear 3341 1988-1994 53 TEETH EXC. 1994 D.I. TURBO

139

I.H.C. TRUCK (Continued)LineNo. Part Title Part No Description

13 7.3 (446) MV446 MEDIUM DUTY ENG - 8 Cyl. - 4 1/8 Bore (MODELCARGOSTAR,S1823,S1824,S1924,S1925) MEDIUM DUTY GAS ENGGear Set 3335S INCLUDES [3334] & [3329A]

14 7.6-AA (466) MEDIUM DUTY DIESEL ENG - 6 Cyl. - 4.30 Bore (ENG CODESDT466,DT466C,DTA466,DTA466C,DTI466C) TURBO DIESELCrank Gear 3315 33 TEETH

15 RD 501 ENG - 6 Cyl. - 4 1/2 BoreGear Set 3327S INCLUDES [3325] & [3326]

16 8.8 (537) VS537 MEDIUM DUTY ENG - 8 Cyl. - 4 5/8 Bore (MODEL CARGOSTAR,S2125,S2524)Gear Set 3320S INCLUDES [3320] & [3321]Cam Gear 3320 106 TEETHCrank Gear 3321 53 TEETH

INFINITIEngine Year Line Engine Year Line Engine Year Line

4 Cyl.2.0 SR20DE DOHC 1991-96 1DOHC ENG - 86.0 MMBore

1999-02 2

6 Cyl.3.0 VG30E SOHC 1990-92 33.0 VG30DE DOHC 1993-97 43.0 VQ30DE (DOHC) 1996-01 53.3 VG33E SOHC 1997-00 6

8 Cyl.4.5 VH45DE DOHC 1990-96 7


1 2.0 SR20DE DOHC ENG - 1991-96 - 4 Cyl. - 86.0 MM Bore (1991-96 G20 BASE) (1994-96 G20 T)1998CCTiming Kit 3-3SRH124S KIT INCLUDES [3SRH124], (2) [S724], [S699], [BT245], [BG246],

BG248], [BG247]Chain 3SRH124 124 LINKSCam Sprocket S724 36 TEETH (2) REQ.Crank Sprocket S699 18 TEETHChain Tensioner BT245Chain Guide BG246 LEFT HAND

BG247 RIGHT HANDBG248 UPPER

2 2.0 SR20DE DOHC ENG - 1999-02 - 4 Cyl. - 86.0 MM Bore (1999-02 G20 BASE, G20 T) 2000CCTiming Kit 3-3SRH124S KIT INCLUDES [3SRH124], (2) [S724], [S699], [BT245], [BG246],

BG248], [BG247]Chain 3SRH124 124 LINKSCam Sprocket S724 36 TEETH 2 REQ.Crank Sprocket S699 18 TEETHChain Tensioner BT245Chain Guide BG246 LEFT HAND

BG247 RIGHT HANDBG248 UPPER

3 3.0 VG30E SOHC ENG - 1990-92 - V6 - 87.0 MM Bore (M30)Belt B-0104 133 TEETHBelt Tensioner BT120

4 3.0 VG30DE DOHC ENG - 1993-97 - V6 - 87.0 MM Bore (J30 BASE) (J30 T)Belt B-0251 228 TEETHBelt Tensioner BT260 RIGHT HANDIdler BT5243 RIGHT HAND

BT5244 UPPERBT5283 LEFT HAND

140

INFINITI (Continued)LineNo. Part Title Part No Description

5 3.0 VQ30DE (DOHC) ENG - 1996-01 - V6 - 93.0 MM Bore (I30)Timing Kit 3-4207S KIT INCLUDES [4207C], (2) [4208C], (2) [S884], (2) [S886], (2)

[S888], [S885], [BG5438], [BG5439], [BG5440], [BT5436],[BT5437], [BT5441], [BT5442] (INCLUDES SPROCKETS)

3-4207SX KIT INCLUDES [4207C], (2) [4208C], BG5438], [BG5439],[BG5440], [BT5436], [BT5437], [BT5441], [BT5442] (DOES NOTINCLUDES SPROCKETS)

Chain 4207C 138 LINKS LOWER4208C 44 LINKS UPPER

Cam Sprocket S884 42 TEETH INTAKE & EXHAUST; OUTER; 2 REQ.S886 42 TEETH EXHAUST; INNER; 2 REQ.S888 42 TEETH INTAKE; INNER; 2 REQ.

Crank Sprocket S885 21 TEETHChain Tensioner BT5436 HYD LOWER RIGHT HAND

BT5437 TENSIONER ARMBT5441 UPPER LEFT HANDBT5442 UPPER RIGHT HAND

Chain Guide BG5438 UPPERBG5439 LEFT LOWERBG5440 LEFT UPPER

6 3.3 VG33E SOHC ENG - 1997-00 - V6 - 91.5 MM Bore (QX4)Belt B-0249 133 TEETH CAMSHAFT BELTBelt Tensioner BT120 CAMSHAFT BELT TENSIONER

7 4.5 VH45DE DOHC ENG - 1990-96 - V8 - 93.0 MM Bore (Q45)Chain 4178C 120 LINKS 2 REQ.; ENGINE TIMING CHAIN

4179C 78 LINKS OIL PUMP CHAINChain Guide BG5251 1990-1996 UPPER LEFT HAND; FOR CAMSHAFT CHAIN

BG5251 1990-1996 UPPER RIGHT HAND; FOR CAMSHAFT CHAINBG5253 1990 To 07/92 FRONT RIGHT HAND; TENSION SIDE; FOR

CAMSHAFT CHAINBG5254 1990-1996 FRONT LEFT HAND; LOOSE SIDE; FOR CAMSHAFT

CHAINBG5255 1990-1996 UPPER; FOR OIL PUMP CHAINBG5256 1990-1996 LOWER; FOR OIL PUMP CHAINBG5257 1990-1996 FRONT RIGHT HAND; SLACK SIDE; FOR CAMSHAFT

CHAIN

141

ISUZUEngine Year Line Engine Year Line Engine Year Line

4 Cyl.1.5 (4XC1) SOHC 1985-89 11.6 (RLR) SOHC 1991-93 21.6 DOHC 1989-92 31.8-P (4FB1) SOHC 1981-84 41.8-B,N (G180Z) SOHC 1981-84 51.8 (RLX) DOHC 1992 61.9 (G200Z) SOHC 1983-87 72.0 (4ZC1) SOHC 1985-89 82.2 (X22SE) DOHC 1998-03 92.2-4 (134) OHV 1996-00 102.2 (F22B6) SOHC 1996-97 112.2-S (2238CC) OHV 1981-87 12

4 Cyl. (Continued)

2.3 (4ZD1) SOHC 1986-95 132.3 (F23A7) SOHC 1998-99 142.6-E (4ZE1) SOHC 1988-97 156 Cyl.2.8-R (LL2) OHV 1989-91 164 Cyl.2.8-8 (169) DOHC 2006 172.9-9 (178) DOHC 2007-08 186 Cyl.3.1-Z (LG6) OHV 1991-94 193.2-V (6VD1) SOHC 1992-97 203.2-W (3165CC) DOHC 1992-95 21

6 Cyl. (Continued)

3.2-W (3165CC) DOHC 1998 223.2-W (3165CC) 6VD1DOHC

2001-04 23

3.5 (6VE1) DOHC 1998-04 245 Cyl.3.5-6 (211) DOHC 2006 253.7-E (223) DOHC 2007-08 266 Cyl.4.2-S (256) DOHC 2003-08 274.3-X (262) OHV 1997-99 288 Cyl.5.3-M,P (323) OHV 2003-06 29


1 1.5 (4XC1) SOHC ENG - 1985-89 - 4 Cyl. - 77 MM Bore (I-MARK)Belt B-0118 1985 To 6/86 112 TEETH

B-0162 From 7/86 TO 1989 112 TEETHCam Sprocket S626 46 TEETHCrank Sprocket S641 23 TEETHBelt Tensioner BT134

2 1.6 (RLR) SOHC ENG - 1991-93 - 4 Cyl. - 80 MM Bore (STYLUS)Belt B-0177 112 TEETH

3 1.6 DOHC ENG - 1989-92 - 4 Cyl. - 80 MM Bore (1989 4XE1 I-MARK) (1990-91 4XE1W IMPLUSE)(1991 4XE1W STYLUS) (1990-92 4XE1WT IMPLUSE TURBO)Belt B-0169 159 TEETH

4 1.8-P (4FB1) SOHC ENG - 1981-84 - 4 Cyl. - 84 MM Bore (I-MARK) (FI DIESEL)Belt B-076 134 TEETHBelt Guide BG94

5 1.8-B,N (G180Z) SOHC ENG - 1981-84 - 4 Cyl. - 84 MM Bore (1981-82 PICK-UP) (1981-84 I-MARK)(GAS CARB)Timing Kit 3SR94-1 KIT INCLUDES [3SR94], [S500], [S501], [BT17], [BT63] & [BD34]Chain 3SR94 94 LINKSCam Sprocket S500 38 TEETHCrank Sprocket S501 19 TEETHChain Tensioner BT17 ADJUSTER


6 1.8 (RLX) DOHC ENG - 1992-92 - 4 Cyl. - 80 MM Bore (4XF1 ENG IMPULSE XS & STYLUS RS)Belt B-0205 163 TEETH

7 1.9 (G200Z) SOHC ENG - 1983-87 - 4 Cyl. - 87 MM Bore (1983-85 IMPULSE) (1983-87 PICK-UP)(1984-85 TROOPER II)Timing Kit 3SR94-2 KIT INCLUDES [3SR94], [S500], [S501], [BT63], [BT61] & [BD34]Chain 3SR94 94 LINKSCam Sprocket S500 38 TEETHCrank Sprocket S501 19 TEETHChain Tensioner BT61 ADJ.


8 2.0 (4ZC1) SOHC ENG - 1985-89 - 4 Cyl. - 88.0 MM Bore (IMPULSE TURBO)Belt B-0121 111 TEETHBelt Tensioner BT263

142

ISUZU (Continued)LineNo. Part Title Part No Description

9 2.2 (X22SE) DOHC ENG - 1998-03 - 4 Cyl. - 86.0 MM Bore (1999-00 AMIGO) (1998-03 RODEO)(2001-03 RODEO SPORT)Belt B-0305 171 TEETH

10 2.2-4 (134) OHV ENG - 1996-00 - 4 Cyl. - 89 MM Bore (HOMBRE)3pc Set 3-370SA INCLUDES [395], [S774], [S549] & [MPC-393] FINE FINISH

CHAIN SET; CHECK FOR POSSIBLE OILING PROBLEM WHENINSTALLING SET; DOES NOT INCLUDE TENSIONER

3-395S INCLUDES [370], [S774], [S549], [BT5115] & [MPC-393] FINEFINISH CHAIN SET; CHECK FOR POSSIBLE OILING PROBLEMWHEN INSTALLING SET

Chain 395 58 LINKS SILENT CHAINCam Thrust Plate Spacer MG221 1996-1997Cam Sprocket S774 40 TEETHCrank Sprocket S549 20 TEETHChain Tensioner BT5115 FOR USE WITH BOTH [370] AND [395] CHAINS

11 2.2 (F22B6) SOHC ENG - 1996-97 - 4 Cyl. - 85 MM Bore (OASIS)Belt B-0186 70 TEETH BALANCE SHAFT; INTERFERENCE ENG.



12 2.2-S (2238CC) OHV ENG - 1981-87 - 4 Cyl. - 88.0 MM Bore (PICK-UP,TROOPER) (NON TURBODIESEL)Belt B-075 87 TEETH

13 2.3-L (4ZD1) SOHC ENG - 1986-95 - 4 Cyl. - 89.4 MM Bore (AMIGO, IMPULSE, PICK-UP &TROOPER)Belt B-0122 115 TEETHBelt Tensioner BT263

14 2.3 (F23A7) SOHC ENG - 1998-99 - 4 Cyl. - 86.0 MM Bore (OASIS) HONDA ENG. VTECBelt B-0186 70 TEETH BALANCE SHAFT BELT; INTERFERENCE ENG.



15 2.6-E (4ZE1) SOHC ENG - 1988-97 - 4 Cyl. - 92.6MM Bore (1988-91 TROOPER II) (1988-95 PICK-UP)(1989-94 AMIGO (1990-97 RODEO)Belt B-0147 137 TEETH

16 2.8-R (LL2) OHV ENG - 1989-91 - V6 - 89 MM Bore (1989 TROOPER II) (1990-91 TROOPER) GMENG.3pc Set 3-373S INCLUDES [373], [S506] & [S511]Chain 373 64 LINKSCam Sprocket S506 40 TEETHCrank Sprocket S511 20 TEETHDamper BD59

17 2.8-8 (169) DOHC ENG - 2006 - 4 Cyl. - 92.96 MM Bore (i-280) GM ENGINETiming Kit 3-195SC INCLUDES [195P], [728FP], [S908AP], [S913P], [BT5511P],



143


17 2.8-8 (169) DOHC ENG - 2006 - 4 Cyl. - 92.96 MM Bore (i-280) GM ENGINE (Continued)Chain Tensioner BT5511 REPLACES 1ST DESIGN SPRING TYPE TENSIONER;




18 2.9-9 (178) DOHC ENG - 2007-08 - 4 Cyl. - 95.5 MM Bore (i-290)Timing Kit 3-195SA INCLUDES [195], [728F], [S908A], [S913], [BT5511], [BT5512],






19 3.1-Z (LG6) OHV ENG - 1991-94 - V6 - 89 MM Bore (1991-94 PICK-UP) (1991-92 RODEO) (GM ENG)3pc Set 3-373S INCLUDES [373], [S506] & [S511]Chain 373 64 LINKSCam Sprocket S506 40 TEETHCrank Sprocket S511 20 TEETHDamper BD59

20 3.2-V (6VD1) SOHC ENG - 1992-97 - V6 - 93.4 MM Bore (SOHC RLU ENG)(1992-97 TROOPER &1993-97 RODEO)Belt B-0221 223 TEETH

21 3.2-W (3165CC) DOHC ENG - 1992-95 - 6 Cyl. - 93.4 MM Bore (TROOPER)Belt B-0220 218 TEETH

22 3.2-W (3165CC) DOHC ENG - 1998 - 6 Cyl. - 93.4 MM Bore (AMIGO)Belt B-0303 191 TEETH

23 3.2-W (3165CC) 6VD1 DOHC ENG - 2001-04 - 6 Cyl. -93.4 MM Bore (2001-04 RODEO) (2001-03RODEO SPORT)Belt B-0303 191 TEETH

24 3.5 (6VE1) DOHC ENG - 1998-04 - V6 - 93.4 MM Bore (AXIOM,RODEO,TROOPER,VEHICROSS)Belt B-0303 191 TEETH EXC. DIRECT FUEL INJECTION ENGINE

25 3.5-6 (211) DOHC ENG - 2006 - 5 Cyl. - 92.96 MM Bore (i-350) GM ENGINETiming Kit 3-195SC INCLUDES [195P], [728FP], [S908AP], [S913P], [BT5511P],



144


25 3.5-6 (211) DOHC ENG - 2006 - 5 Cyl. - 92.96 MM Bore (i-350) GM ENGINE (Continued)Chain Tensioner BT5511 REPLACES 1ST DESIGN SPRING TYPE TENSIONER;




26 3.7-E (223) DOHC ENG - 2007-08 - 5 Cyl. - 95.5 MM Bore (i-370)(GM ENG.)Timing Kit 3-195SA INCLUDES [195], [728F], [S908A], [S913], [BT5511], [BT5512],






27 4.2-S (256) DOHC ENG - 2003-08 - 6 Cyl. - 93 MM Bore (ASCENDER) GM ENG VORTECTiming Kit 3-195S 2003-2007 INCLUDES [195], [S908A], [S913], [BT5512], [BG5504],

[BG5506], [BG6006]3-195SB 2008 INCLUDES [195], [S908A], [S913], [BT5512], [BG5504],

[BG5510], [BG6006]Chain 195 168 LINKSCam Sprocket S908A 58 TEETHCrank Sprocket S913 29 TEETHChain Tensioner BT5512Chain Guide BG5504 RIGHT HAND

BG5506 2003-2007 LEFT HANDBG5510 2008 LEFT HANDBG6006 2003-2007 UPPER

28 4.3-X (262) OHV ENG - 1997-99 - V6 - 101.6 Bore (HOMBRE) VORTEC3pc Set 3-509S INCLUDES [499], [S776] & [S505]Chain 499 46 LINKSCam Sprocket S776 36 TEETHCrank Sprocket S505 18 TEETH

29 5.3-M,P (323) OHV ENG - 2003-06 - 8 Cyl. - 96 MM Bore (ASCENDER) GM ENG VORTEC3pc Set 3-3SRH60SA INCLUDES [3SRH60], [S878] & [S827]; FOR USE W/3 BOLT

CAMSHAFTChain 3SRH60 60 LINKSCam Sprocket S878 44 TEETH; FOR USE W/3BOLT CAMSHAFTCrank Sprocket S827 22 TEETH 22 TEETHDamper BD417

145

JAGUAREngine Year Line Engine Year Line Engine Year Line

6 Cyl.2.4 2483CC DOHC 1956-62 13.4 3442CC DOHC 1949-61 2

6 Cyl. (Continued)

3.8 3781CC DOHC 1958-67 34235CC 4.2 DOHC 1972-87 4


1 2.4 2483CC DOHC ENG - 1956-62 - 6 Cyl. - 83 MM BoreChain 3DR100 1956-1962 100 LINKS UPPER

3DR68 1956-1962 68 LINKS LOWER2 3.4 3442CC DOHC ENG - 1949-61 - 6 Cyl. - 83 MM Bore

Chain 3DR100 1949-1961 100 LINKS UPPER3DR82 1949-1961 82 LINKS LOWER

3 3.8 3781CC DOHC ENG - 1958-67 - 6 Cyl. - 87.0 MM BoreChain 3DR100 100 LINKS UPPER

3DR82 82 LINKS LOWER4 4.2 4235CC DOHC ENG - 1972-87 - 6 Cyl. - 92 MM Bore (VANDEN PLAS, XJ6)

Chain 3DR100 1972-1987 100 LINKS UPPER3DR82 1972-1987 82 LINKS LOWER

JEEPEngine Year Line Engine Year Line Engine Year Line

4 Cyl.134 F-HEAD 1950-73 1134 L-HEAD 1942-54 2134 L-HEAD 1956-65 32.4-1 (148) DOHC 2002-06 42.5-E,H,P,U (150) 1983-02 5151 2.5L (GM) 1980-83 66 Cyl.2.8 (173) 1984-86 73.7-K (226) SOHC 2002-13 8

6 Cyl. (Continued)

225 1966-71 9226 1957-65 103.8-1 (231) OHV 2007-11 11232 OHV 1965-78 124.0-L,M,S (242) OHV 1987-06 134.2 (258) OHV 1971-90 148 Cyl.4.7-J,N,P (285) SOHC 1999-10 15304 1972-81 16

8 Cyl. (Continued)

5.2 (318) 1993-98 17327 1965-68 185.7-2,T (345) OHV ENG 2005-14 19350 1968-71 205.9 (360) 1971-91 215.9 (360) 1998 226.1-3,W (370) OHV 2006-10 23401 1974-78 24


1 134 F-HEAD ENG - 1950-73 - 4 Cyl. - 3 1/8 BoreCam Gear 2900 56 TEETH FIBERCrank Gear 2901 28 TEETH

2 134 L-HEAD ENG - 1942-54 - 4 Cyl. - 3.13 Bore (WILLYS)Cam Gear 2900 56 TEETH FIBER AFTER ENG. #44417Crank Gear 2901 28 TEETH AFTER ENG. #44417

3 134 L-HEAD ENG - 1956-65 - 4 Cyl. 3.13 Bore (DISPATCHER,DJ3,FC150,FC170,UNIVERSALTRUCK,WILLYS)Cam Gear 2900 56 TEETH FIBER AFTER ENG. #44417Crank Gear 2901 28 TEETH AFTER ENG. #44417

4 2.4-1 (148) DOHC ENG. - 2002-06 - 4 Cyl. - 3.44 Bore (LIBERTY, WRANGLER) POWER TECHChain 201 60 LINKS BALANCE SHAFT CHAINBelt B-0265 146 TEETH CAMSHAFT BELTBalance Shaft Sprocket S642 18 TEETHChain Tensioner BT298 2003 BALANCE SHAFT CHAIN TENSIONERChain Guide BG297 2003 BALANCE SHAFT CHAIN GUIDE

5 2.5-E,H,P,U (150) ENG - 1983-02 - 4 Cyl. - 3.876 BoreTiming Kit 3-3SR64S KIT INCLUDES [3SR64], [S607], [S608], [BT167], [BG337]3pc Set 3-3SR64 INCLUDES [3SR64], [S608] & [S607]Chain 3SR64 64 LINKSCam Sprocket S608 48 TEETHCrank Sprocket S607 24 TEETHContinued on Next Page

146

JEEP (Continued)LineNo. Part Title Part No Description

5 2.5-E,H,P,U (150) ENG - 1983-02 - 4 Cyl. - 3.876 Bore (Continued)Chain Tensioner BT167Chain Guide BG337 DAMPER

6 151 2.5L (GM) ENG - 1980-83 - 4 Cyl. - 4.000 Bore (GM ENG.)Gear Set 2542S FIBER INCLUDES [2542] & [2537]Cam Gear 2542 54 TEETH FIBERCrank Gear 2537 27 TEETHCam Thrust Plate Spacer MG221

7 2.8 (173) ENG - 1984-87 - V6 - 3.504 Bore (CHEV)3pc Set 3-373S INCLUDES [373], [S506] & [S511]Chain 373 64 LINKSCam Sprocket S506 40 TEETHCrank Sprocket S511 20 TEETHDamper BD59

8 3.7-K (226) SOHC ENG - 2002-13 - V6 - 3.66 Bore (COMMANDER,GRAND CHEROKEE,LIBERTY)Timing Kit 3-393SA 2002-2003 KIT INCLUDES [393], (2) [194], [S861], [S824], [S832],

[BT418], [BT431], [BT432], (2) [BT433], [BG434], [BG435], [S863]THIS KIT CONTAINS THE S832 JTEC CAM SPROCKET

3-393SB 2002-2011 KIT INCLUDES [393], (2) [194], [BT418], [BT431],[BT432], (2) [BT433], [BG434], [BG435] THIS KIT CONTAINS NOSPROCKETS; SPROCKETS MUST BE PURCHASEDSEPERATELY TO COMPLETE KIT

3-393SD 2004-2011 KIT INCLUDES [393], (2) [194], [S824], [S868], [S861],[S863], [BT418], [BT431], [BT432], (2) [BT433], [BG434], [BG435]THIS KIT CONTAINS THE S868 NGC CAM SPROCKET

Chain 194 2002-2011 94 LINKS SECONDARY; 2 REQUIRED393 2002-2011 70 LINKS PRIMARY

Cam Sprocket S824 26 TEETH LEFT HANDS832 2002-2003 26 TEETH RIGHT HAND W/JTEC SPROCKETS868 2004-2013 26 TEETH RIGHT HAND W/NGC SPROCKET

Crank Sprocket S861 25 TEETHIdler Sprocket S863 2002-2011 50 TEETH PRIMARY; DOES NOT INCLUDE DRIVE

SHAFTChain Tensioner BT418 2002-2011 PRIMARY TENSIONER

BT431 SECONDARY TENSIONER; RIGHTBT432 SECONDARY TENSIONER; LEFTBT433 2002-2011 SECONDARY ARM; 2 REQUIRED

Chain Guide BG434 2002-2011 SECONDARY RIGHTBG435 2002-2011 SECONDARY LEFT

9 225 ENG - 1966-71 - V6 - 3.75 Bore (BUICK ENG)3pc Set 3-359S INCLUDES [359], [S334] & [S323]Chain 359 54 LINKSCam Sprocket S334 40 TEETHCrank Sprocket S323 20 TEETHDamper BD44 RIGHT HAND W/SPRING

BD45 LEFT HAND10 226 ENG - 1957-65 - 6 Cyl. - 3 5/16 Bore (FC150, FC170, WILLYS)

Chain 505 46 LINKS 3/4" WIDE11 3.8-1 (231) OHV ENG - 2007-2011 - 6 Cyl. - 3.78 Bore (WRANGLER)

Cam Thrust Plate MD100 .297 PLATE THICKNESS FOR USE W/S934 CAM SPROCKET3pc Set 3-3235S INCLUDES [300], [S934], [S927] & [MD100]Chain 300 64 LINKSContinued on Next Page

147


11 3.8-1 (231) OHV ENG - 2007-2011 - 6 Cyl. - 3.78 Bore (WRANGLER) (Continued)Cam Sprocket S934 40 TEETH USE NEW THRUST PLATE SUPPLIED W/THIS



13 4.0-L,M,S (242) OHV ENG - 1987-06 - 6 Cyl. - 98.5 MM BoreTiming Kit 3-385SA 1994-1995 KIT INCLUDES [385], [S808], [S809], [BG337]

WRANGLER3-385SA 1994-1998 KIT INCLUDES [385], [S808], [S809], [BG337]

CHEROKEE, GRAND CHEROKEE, TJ (CHEROKEE & GRANDCHEROKEE USE THIS KIT W/MC1376 CAMSHAFT)

3-385SA 1997-1998 KIT INCLUDES [385], [S808], [S809], [BG337]WRANGLER (USE THIS KIT W/MC1376 CAMSHAFT)

3-385SB 1999-2006 KIT INCLUDES [385], [S809], [S822], [BG337]CHEROKEE, GRAND CHEROKEE, TJ (CHEROKEE & GRANDCHEROKEE USE THIS KIT W/MC1377 CAMSHAFT)

3pc Set 3-4SR48 1987-1993 INCLUDES [4SR48], [S688] & [S689]Chain 385 1994-2006 64 LINKS


S808 1994-1998 48 TEETHS822 1999-2006 45 TEETH


Chain Guide BG33714 4.2 (258) OHV ENG - 1971-90 - 6 Cyl. - 3.75 Bore


15 4.7-J,N,P (285) SOHC ENG - 1999-10 - 8 Cyl. - 3.66 Bore (2006-10 COMMANDER, 1999-10 GRANDCHEROKEE)GAS, FLEXTiming Kit 3-393S 1999-2001 KIT INCLUDES [393], (2) [394], [S852], [S854], [S861],

[S863], [S865], [BT418], [BT419], [BT420], (2) [BD421], (2) [BG422]W/JTEC CAM SPROCKET

3-393SC 2002-2006 KIT INCLUDES [393], (2) [394], [S852], [S870], [S861],[BT418], [BT419], [BT420], (2) [BD421], (2) [BG422], [S863], [S865]W/NGC CAM SPROCKET; DOES NOT INCLUDE INSTALLATIONBOLTS

3-393SX 1999-2006 KIT INCLUDES [393], (2) [394], [BT418], [BT419],[BT420], (2) [BD421], (2) [BG422] NOTE; THIS KIT DOES NOTCONTAIN SPROCKETS

Chain 393 1999-2009 70 LINKS PRIMARY CHAIN; EXCLUDES 2009 GRANDCHEROKEE

394 1999-2006 53 LINKS SECONDARY CHAIN; (2) REQ.Cam Sprocket S852 1999-2006 30 TEETH LEFT HAND

S854 1999-2001 30 TEETH RIGHT HAND; W/ JTEC TARGET WHEELS870 2002-2006 30 TEETH RIGHT HAND; W/ NGC TARGET WHEEL

Crank Sprocket S861 1999-2009 25 TEETH EXC. 2009 GRAND CHEROKEEContinued on Next Page

148


15 4.7-J,N,P (285) SOHC ENG - 1999-10 - 8 Cyl. - 3.66 Bore (2006-10 COMMANDER, 1999-10 GRANDCHEROKEE)GAS, FLEX (Continued)Idler Sprocket S863 1999-2009 50 TEETH PRIMARY; EXC. 2007-09 GRAND

CHEROKEES865 1999-2006 30 TEETH SECONDARY

Chain Tensioner BT418 1999-2009 PRIMARY TENSIONER; EXC. 2009 GRANDCHEROKEE

BT419 1999-2009 HYD SECONDARY RIGHT HAND TENSIONER; EXC.2009 GRAND CHEROKEE

BT420 1999-2009 HYD SECONDARY LEFT HAND TENSIONER; EXC.2009 GRAND CHEROKEE

Damper BD421 1999-2009 SECONDARY TENSIONER ARM; (2) REQUIRED; EXC.2009 GRAND CHEROKEE

Chain Guide BG422 1999-2009 SECONDARY GUIDE; (2) REQUIRED; EXC. 2009GRAND CHEROKEE

16 304 ENG - 1972-81 - 8 Cyl. - 3 3/4 Bore3pc Set 3-349S INCLUDES [349], [S412] & [S281]; INCLUDES 7/8" WIDE CHAIN;




S515 23 TEETH USE W/3/4" WIDE CHAIN17 5.2 (318) ENG - 1993-98 - 8 Cyl. - 3.91 Bore



19 5.7-2,T (345) OHV ENG - 2005-14 - 8 Cyl. - 3.92 Bore (COMMANDER,GRAND CHEROKEE) HEMITiming Kit 3-704S 2005-2008 KIT INCLUDES (1) 704, (1) S896, (1) S889, (1) BT5489Chain 704 2005-2008 86 LINKSCam Sprocket S896 2005-2008 52 TEETHCrank Sprocket S889 2005-2008 26 TEETHChain Tensioner BT5489 2005-2008

20 350 ENG - 1968-71 - 8 Cyl. - 3.800 Bore (BUICK ENG)3pc Set 3-359S INCLUDES [359], [S334] & [S323]Chain 359 54 LINKSCam Sprocket S334 40 TEETHCrank Sprocket S323 20 TEETH

21 5.9 (360) ENG - 1971-91 - 8 Cyl. - 4.080 Bore3pc Set 3-349S INCLUDES [349], [S412] & [S281]; INCLUDES 7/8" WIDE CHAIN;



374 62 LINKS 3/4" WIDECam Sprocket S512 46 TEETH USE W/3/4" WIDE CHAINCrank Sprocket S281 23 TEETH USE W/7/8" WIDE CHAINContinued on Next Page

149


21 5.9 (360) ENG - 1971-91 - 8 Cyl. - 4.080 Bore (Continued)Crank Sprocket S515 23 TEETH USE W/3/4" WIDE CHAIN

22 5.9-Z (360) ENG - 1998 - V8 - 4.000 Bore (GRAND CHEROKEE)3pc Set 3-380S INCLUDES [380], [S712] & [S721]Chain 380 68 LINKSCam Sprocket S712 46 TEETHCrank Sprocket S721 23 TEETH

23 6.1-3,W (370) OHV ENG - 2006-10 - 8 Cyl. - 4.06 Bore (GRAND CHEROKEE SRT8) HEMITiming Kit 3-704S KIT INCLUDES (1) 704, (1) S896, (1) S889, (1) BT5489Chain 704 86 LINKSCam Sprocket S896 52 TEETHCrank Sprocket S889 26 TEETHChain Tensioner BT5489





S515 23 TEETH USE W/3/4" WIDE CHAIN

KIAEngine Year Line Engine Year Line Engine Year Line

4 Cyl.1.5 (1493CC) DOHC 2001-02 11.6 (1594CC) DOHC 2003-05 21.6 (1597CC) SOHC 1994-95 31.6-3,4 (1597CC) DOHC 1995-97 41.8-1 (1793CC) DOHC 1998-04 5

4 Cyl. (Continued)

1.8-5 (1839CC) DOHC 1995-97 62.0 (1998CC) DOHC 1995-02 72.0-1,2 (1998CC) SOHC 1995 82.4-S (2351CC) DOHC 2001-06 92.4 (2359CC) DOHC 2006-13 10

6 Cyl.2.5 (2500CC) DOHC 2001 112.7 (2656) DOHC 2002-12 123.5-1 (3497CC) DOHC 2002-06 13


1 1.5 (1493CC) DOHC ENG - 2001-02 - 4 Cyl. - 75.5 MM Bore (RIO)Belt B-0318 137 TEETH INTERFERENCE ENGINE APPLICATIONIdler BT214

2 1.6 (1594CC) DOHC ENG - 2003-05 - 4 Cyl. - 78 MM Bore (RIO)Belt B-0318 137 TEETH INTERFERENCE ENGINE APPLICATIONIdler BT214

3 1.6 (1597CC) SOHC ENG - 1994-95 - 4 Cyl. - 78 MM Bore (SEPHIA GS,LS,RS) MAZDA B6 ENGBelt B-0185 107 TEETHBelt Tensioner BT164

4 1.6-3,4 (1597CC) DOHC ENG - 1995-97 - 4 Cyl. - 78 MM Bore (SEPHIA) MAZDA B6ZE ENGBelt B-0179 145 TEETHBelt Tensioner BT213 TENSIONERIdler BT214 IDLER

5 1.8-1 (1793CC) DOHC ENG - 1998-04 - 4 Cyl. - 83 MM Bore (1998-01 SEPHIA) (2000-04 SPECTRA)MAZDA ENG (NOT USED IN 1999)Belt B-0302 1998-2001 154 TEETH SEPHIA

B-0302 2000-2004 154 TEETH SPECTRA

150

KIA (Continued)LineNo. Part Title Part No Description

6 1.8-5 (1839CC) DOHC ENG - 1995-97 - 4 Cyl. - 83 MM Bore (SEPHIA GS,LS,RS) MAZDA ENGBelt B-0179 1995-1997 145 TEETHBelt Tensioner BT213 TENSIONERIdler BT214 IDLER

7 2.0-3 (1998CC) DOHC ENG - 1995-02 - 4 Cyl. - 86 MM Bore (SPORTAGE) MAZDA ENG 16VBelt B-0281 168 TEETHBelt Tensioner BT166Idler BT5444

8 2.0-1,2 (1998CC) SOHC ENG - 1995 - 4 Cyl. - 86 MM Bore (SPORTAGE) MAZDA ENG 8VBelt B-0264 108 TEETHBelt Tensioner BT166

9 2.4-6,S (2351CC) DOHC ENG - 2001-06 - 4 Cyl. - 86.5 MM Bore OPTIMA, MAGENTIS (HYUNDAIENG.)Belt B-0313 175 TEETH TIMING BELT (INTERFERENCE ENGINE

APPLICATION)B-0314 2001-2006 65 TEETH BALANCE SHAFT BELT (INTERFERENCE

ENGINE APPLICATION)10 2.4 (2359CC) DOHC ENG - 2006-13 - 4 Cyl. - 88.0 MM Bore

(FORTE,SORENTO,SPORTAGE,OPTIMA,MAGENTIS,RONDO) HYUNDAI 16V ELECTRIC/GAS ENGINCLUDES TRUCKSTiming Kit 3-900CS 2006-2010 KIT INCLUDES [900C], [901C], [S926], [S931], [S933],

[BT5557], [BT5559], [BT5560], [BT5563], [BG5558], [BG5561]OPTIMA, RONDO

3-900CSA 2010-2011 KIT INCLUDES [900C], [901C], [S931], [S933],[BT5557], [BT5559], [BT5560], [BT5563], [BG5558], [BG5561]NOTE; DOES NOT INCLUDE CAM SPROCKET FORTE

Chain 900C 2006-2011 90 LINKS TIMING CHAIN; FORTE, OPTIMA & RONDO.EXC. 2011 OPTIMA & RONDO

900C 2011-2012 90 LINKS TIMING CHAIN; SPORTAGE, SORENTOW/MPI

901C 2006-2011 37 LINKS OIL PUMP CHAIN; FORTE, OPTIMA &RONDO. EXC. 2011 OPTIMA & RONDO

901C 2011-2012 37 LINKS OIL PUMP CHAIN; SPORTAGE, SORENTOW/MPI

Cam Sprocket S926 2006-2010 54 TEETH EXHAUST; OPTIMA, RONDOCrank Sprocket S931 2006-2011 27 TEETH OUTER; FORTE, OPTIMA, RONDO; EXC.

2011 OPTIMA & RONDOS933 2006-2011 30 TEETH INNER; FORTE, OPTIMA, RONDO; EXC.

2011 OPTIMA & RONDOChain Tensioner BT5557 2006-2011 RIGHT HAND UPPER; TIMING CHAIN PRIMARY

TENSIONER ARM; FORTE, OPTIMA, RONDO; EXC. 2011OPTIMA & RONDO

BT5557 2011-2012 RIGHT HAND UPPER PRIMARY; TIMING CHAINTENSIONER ARM; SPORTAGE & SORENTO W/MPI

BT5559 2006-2011 RIGHT HAND UPPER; PRIMARY TIMING CHAINTENSIONER; FORTE, OPTIMA & RONDO; EXC. 2011 OPTIMA &RONDO

BT5559 2011-2012 RIGHT HAND UPPER; PRIMARY TIMING CHAINTENSIONER; SPORTAGE & SORENTO W/MPI

BT5560 2006-2011 LEFT HAND LOWER; OIL PUMP CHAIN TENSIONERARM; FORTE, OPTIMA, RONDO. EXC. 2011 OPTIMA & RONDO

BT5560 2011-2012 LEFT HAND LOWER; OIL PUMP CHAIN TENSIONERARM; SPORTAGE


151

KIA (Continued)LineNo. Part Title Part No Description

10 2.4 (2359CC) DOHC ENG - 2006-13 - 4 Cyl. - 88.0 MM Bore(FORTE,SORENTO,SPORTAGE,OPTIMA,MAGENTIS,RONDO) HYUNDAI 16V ELECTRIC/GAS ENGINCLUDES TRUCKS (Continued)Chain Tensioner BT5563 2006-2011 LEFT HAND LOWER; OIL PUMP CHAIN TENSIONER;

FORTE, OPTIMA & RONDO; EXC. 2011 OPTIMA & RONDOBT5563 2011-2012 LEFT HAND LOWER; OIL PUMP CHAIN TENSIONER;

SPORTAGE & SORENTO W/MPIChain Guide BG5558 2006-2011 LEFT UPPER PRIMARY; TIMING CHAIN GUIDE;

FORTE, OPTIMA & RONDO; EXC. 2011 OPTIMA & RONDOBG5558 2011-2012 LEFT UPPER PRIMARY; TIMING CHAIN GUIDE;

SPORTAGE & SORENTO W/MPIBG5561 2006-2011 RIGHT HAND LOWER OIL PUMP CHAIN GUIDE;

FORTE, OPTIMA & RONDO; EXC. 2011 OPTIMA & RONDOBG5561 2011-2012 RIGHT HAND LOWER OIL PUMP CHAIN GUIDE;

SPORTAGE11 2.5 (2500CC) DOHC ENG - 2001 - 6 Cyl. - 80 MM Bore (OPTIMA,MAGENTIS) HYUNDAI ENG

Belt B-0315 207 TEETH INTERFERENCE ENGINE APPLICATION12 2.7 (2656) DOHC ENG - 2002-12 - 6 Cyl. - 86.7 MM Bore (MAGENTIS,OPTIMA,RONDO,SPORTAGE)

24V G6BA/G6A5 HYUNDAI ENG.Belt B-0315 2002-2006 207 TEETH INTERFERENCE ENGINE APPLICATION

13 3.5-1 (3497CC) DOHC ENG - 2002-06 - 6 Cyl. - 93 MM Bore (2004-06 AMANTI) (2002-05 SEDONA)(2003-06 SORENTO) HYUNDAI ENGBelt B-0323 259 TEETH CAMSHAFT BELT; INTERFERENCE ENG.

APPLICATIONBelt Tensioner BT271 FRONT; CAMSHAFT BELT TENSIONER PULLEYIdler BT227 LEFT HAND; CAMSHAFT BELT IDLER PULLEY

LEXUSEngine Year Line Engine Year Line Engine Year Line

4 Cyl.2.4 (2362CC) DOHC 2010-12 16 Cyl.2.5-V (2508CC) DOHC 1990-91 23.0-V (2959CC) DOHC 1992-93 3

6 Cyl. (Continued)

3.0 (2959,2995CC) DOHC 1994-03 43.0-J,D (2997CC) DOHCENG

1992-05 5

8 Cyl.4.0-U,H (3969CC) DOHC 1990-00 64.3-N (4293CC) DOHC 2001-10 74.7 (4663CC) DOHC 1998-09 8


1 2.4 (2362CC) DOHC ENG - 2010-12 - 4 Cyl. - 88.5 MM Bore (HS250H) 16V (2AZFXE) ELECTRIC/GASTiming Kit 3-752S SOLD AS KIT ONLY; KIT INCLUDES (2) CHAINS,(1)

TENSIONER,(3) GUIDES,(1) CAM SPROCKET,(1) CRANKSPROCKET, (1) OIL PUMP SPROCKET, (1) SEAL, (1) GASKET

2 2.5-V (2508CC) DOHC ENG - 1990-91 - V6 - 87.4 MM Bore (ES250) (2VZFE)Belt B-0157 179 TEETH

3 3.0-V (2959CC) DOHC ENG - 1992-93 - V6 - 87.5 MM Bore (1992-93 ES300) (3VZFE)Belt B-0200 191 TEETH

4 3.0 (2959,2995CC) DOHC ENG - 1994-03 - V6 - 87.5 MM Bore (1994-95 ES300 2995CC) (1996-98ES300 2959CC) (1999-03 ES300,RX300 2995CC) (1MZFE)Belt B-0257 211 TEETH

5 3.0-J,D (2997CC) DOHC ENG - 1992-05 - 6 Cyl. - 86 MM Bore (1993-05 GS300) (2001-05 IS300)(1992-00 SC300) (2JZGE)Belt B-0215 143 TEETH CAMSHAFT BELT

152

LEXUS (Continued)LineNo. Part Title Part No Description

6 4.0-U,H (3969CC) DOHC ENG - 1990-00 - V8 - 87.5 MM Bore (GS400, LS400, SC400) (1UZFE)Belt B-0190 1990-1997 209 TEETH

B-0298 1998-2000 211 TEETH INTERFERENCE ENGINEBelt Tensioner BT5525 TENSIONER PULLEY

BT6003 TENSIONERIdler BT5259 BELT IDLER

7 4.3-N (4293CC) DOHC ENG - 2001-10 - 8 Cyl. - 91 MM Bore (2001-07 GS430, 2001-06 LS430)(2002-10 SC430) (3UZFE)Belt B-0298 211 TEETH INTERFERENCE ENGINEBelt Tensioner BT5525 TENSIONER PULLEY


8 4.7 (4663CC) DOHC ENG - 1998-09 - V8 - 94 MM Bore (1998-07 LX470) (2003-09 GX470) (2UZFE)Belt B-0298 211 TEETH INTERFERENCE ENGINEBelt Tensioner BT5525 TENSIONER PULLEY


MAZDAEngine Year Line Engine Year Line Engine Year Line

1146CC (12A) 1970-85 14 Cyl.1169CC (OHV) 1970-71 21272CC (SOHC) 1976-78 32 Cyl.1308CC ENG. 1984-91 44 Cyl.1415CC (OHC) 1979-80 51489CC (DOHC) 1995-98 61490CC (OHC) 1981-85 71586CC (SOHC) 1971-76 81589CC (DOHC) 1999-01 91597CC (DOHC) 1988-95 101597CC (SOHC) 1986-94 11

4 Cyl. (Continued)

1796CC (OHC) 1977-78 121839CC (DOHC) 1990-05 131839CC (SOHC) 1990-94 146 Cyl.1845CC (DOHC) 1992-95 154 Cyl.1970CC (OHC) 1979-84 161991CC (DOHC) 1993-02 171998CC (OHC) 1984-87 181998CC DIESEL 1984-85 192000CC (DOHC) 2001-03 202000CC (DOHC) 2004-15 212184CC (SOHC) 1988-92 222184CC (SOHC) 1987-93 23

4 Cyl. (Continued)

2260CC (DOHC) 2003-13 242300CC (DOHC) 2002-10 252492CC (SOHC) 1998-01 266 Cyl.2497CC (DOHC) 1993-01 274 Cyl.2555CC (OHC) 1987-88 282606CC (OHC) 1989-94 296 Cyl.3.0 (2954CC) DOHC 2001-11 302954CC (DOHC) 1990-95 312954CC (OHV) 1994-08 322954CC (SOHC) 1988-98 334016CC (OHV) 1991-00 34


1 1146CC (12A) ENG - 1970-85 (ROTARY ENG. MODEL R100, RX-2, RX-3, RX7)Chain 8MMSR54 54 LINKS OIL PUMP

2 1169CC (OHV) ENG - 1970-71 - 4 Cyl. - 70 MM Bore (1200)Chain 172 46 LINKS OIL PUMP

3SR94 94 LINKS CAMSHAFT3 1272CC (SOHC) ENG - 1976-78 - 4 Cyl. - 73 MM Bore (GLC,MIZER)

Chain 3SR44 44 LINKS OIL PUMPChain Tensioner BT47Chain Guide BG86 1976-1978 RIGHT

4 1308CC ENG - 1984-91 - 2 Cyl. (RX-7 1984-91) R BLOCKChain 8MMSR58 58 LINKS OIL PUMP CHAIN

5 1415CC (OHC) ENG - 1979-80 - 4 Cyl. - 78 MM Bore (GLC)Chain 3DR90 90 LINKS CAMSHAFT

3SR44 44 LINKS OIL PUMPCam Sprocket S540 36 TEETHChain Tensioner BT47

153

MAZDA (Continued)LineNo. Part Title Part No Description

6 1489CC (DOHC) ENG - 1995-98 - 4 Cyl. - 75 MM Bore (PROTEGE')Belt B-0266 1995-1997 125 TEETHBelt Tensioner BT213 BELTIdler BT214 1995-1997 LOWER

7 1490CC (OHC) ENG - 1981-85 - 4 Cyl. - 78 MM Bore (GLC SEDAN,HATCHBACK)Chain 3DR90 90 LINKS CAMSHAFT

8MMSR52 52 LINKS OIL PUMPCrank Sprocket S543 1981-1985 18 TEETH INNER

S545 1981-1985 21 TEETH OUTERDamper BD81 1981-1985 LEFT HANDChain Guide BG80

8 1586CC (SOHC) ENG - 1971-76 - 4 Cyl. - 78.0 MM Bore (1971-72 616, 1972-74 808 & 1972-76 B1600)Chain 172 46 LINKS OIL PUMP

3DR100 1974-1976 100 LINKS CAMSHAFTCam Sprocket S450 1974-1976 38 TEETHCrank Sprocket S449 1974-1976 19 TEETH INNER

S451 1971-1973 19 TEETH INNERS451 1971-1976 19 TEETH OUTER

Chain Tensioner BT17 1971-1973 ADJUSTER FOR TENSIONERBT46 1974-1976

Damper BD83 1971-1976 LEFTChain Guide BG85 1971 To 5/73 RIGHT

BG87 From 5/74 TO 1976 RIGHTBG88 From 6/73 To 4/74 RIGHT

9 1589CC (DOHC) ENG - 1999-01 - 4 Cyl. - (PROTEGE')Belt B-0308 123 TEETHBelt Tensioner BT213Idler BT214

10 1597CC (DOHC) ENG - 1988-95 - 4 Cyl. - 78 MM Bore (1988-89 323 TURBO) (1990-93 MX-5 MIATA)(1994-95 MX-3)Belt B-0179 1990-1995 145 TEETHBelt Tensioner BT213Idler BT214

11 1597CC (SOHC) ENG - 1986-94 - 4 Cyl. - 78.0 MM Bore (323) 8VBelt B-0123 From 1/1/86 To 9/1/86 107 TEETH

B-0141 From 9/1/86 To 2/7/89 107 TEETHB-0185 From 2/7/89 TO 1994 107 TEETH

Belt Tensioner BT16412 1796CC (OHC) ENG - 1977-78 - 4 Cyl. - 78 MM Bore (B1800 1977-78)

Chain 172 46 LINKS OIL PUMP3DR106 106 LINKS CAMSHAFT

Cam Sprocket S456 38 TEETHCrank Sprocket S449 1977-1978 19 TEETH INNER

S451 1977-1978 19 TEETH OUTERChain Tensioner BT46Damper BD40 1977-1978 RIGHT

BD74 1977-1978 LEFT13 1839CC (DOHC) ENG - 1990-05 - 4 Cyl. - 83 MM Bore (1990-00 PROTEGE') (1994-05 MIATA, MX5)

(NOTE: MIATA NOT MADE IN 1998)Belt B-0179 145 TEETH EXCLUDES 1999-00 PROTEGEBelt Tensioner BT213 EXC. 1999-00 PROTEGEIdler BT214 EXC. 1999-00 PROTEGE

154


14 1839CC (SOHC) ENG - 1990-94 - 4 Cyl. - 83 MM Bore (PROTEGE')Belt B-0185 107 TEETH CAMSHAFT BELTBelt Tensioner BT164 CAMSHAFT BELT TENSIONER

15 1845CC (DOHC) ENG - 1992-95 - V6 - 74.9 MM Bore (MX-3)Belt B-0214 192 TEETHBelt Tensioner BT129 TENSIONER W/ARM

BT324 TENSIONER W/O ARMIdler BT128 1992-1995 LOWER

BT325 1992-1995 UPPER16 1970CC (OHC) ENG - 1979-84 - 4 Cyl. - 80 MM Bore (1979-82 626) (1979-84 B2000)

Timing Kit 3DR106-2 From 8/81 TO 1984 KIT INCLUDES [3DR106], [8MMSR54],[S449], [S456], [S537], [S453], [BT47], [BD74] & [BG77]

3DR106-3 1979 To 1/80 KIT INCLUDES [3DR106], [172], [S456], [S449],[S451], [BT47], [BD40] & [BD74]

Chain 172 1979-1980 46 LINKS OIL PUMP3DR106 106 LINKS CAMSHAFT8MMSR54 1981-1984 54 LINKS OIL PUMP

Cam Sprocket S456 38 TEETHCrank Sprocket S449 1979-1984 19 TEETH INNER

S451 1979-1980 19 TEETH OUTERS453 1981-1984 19 TEETH OUTER

Chain Tensioner BT47Damper BD40 1979 To 1/80 RIGHT

BD74 1979-1984 LEFTChain Guide BG77 From 8/81 TO 1984 RIGHT

17 1991CC (DOHC) ENG - 1993-02 - 4 Cyl. - 83 MM Bore (626, MX-6)Belt B-0228 135 TEETH

18 1998CC (OHC) ENG - 1984-87 - 4 Cyl. - 86 MM Bore (1984-87 626) (1985-87 B2000)Belt B-0113 1985 109 TEETH 626

B-0113 1986 109 TEETH B2000B-0117 1986-1987 109 TEETH 626B-0117 1987 109 TEETH B2000B-088 1984 109 TEETH 626

Belt Tensioner BT11719 1998CC DIESEL ENG - 1984-85 - 4 Cyl. - 86 MM Bore (626)

Belt B-0103 1984-1985 148 TEETH FRONT20 2000CC (DOHC) ENG - 2001-03 - 4 Cyl. - 84.8 MM Bore PROTEGE 2001-03)

Belt B-0228 135 TEETH21 2000CC (DOHC) ENG - 2004-15 - 4 Cyl. - 87.5 MM Bore (MAZDA 3, 3 SPORT, MX-5, MIATA MX-5)

DURATECTiming Kit 3-727S 2004-2011 INCLUDES [727F], [706F], (2) [S898], [S891], [S893],

[BT452], [BT5514], [BT5555], [BG449], [BG5556] EXC.2011 MX-5,MX-5 MIATA

Chain 706F 2004-2011 54 LINKS OIL PUMP CHAIN; EXC.2011 MX-5, MX-5MIATA

727F 2004-2011 134 LINKS TIMING CHAIN; EXC.2011 MX-5, MX-5MIATA

Cam Sprocket S898 2004-2011 2 REQ.; EXC.2011 MX-5, MX-5 MIATACrank Sprocket S891 2004-2011 EXC.2011 MX-5, MX-5 MIATAOil Pump Sprocket S893 2004-2011 24 TEETH EXC.2011 MX-5, MX-5 MIATAChain Tensioner BT452 2004-2011 OIL PUMP CHAIN TENSIONER; EXC.2011 MX-5, MX-5

MIATAContinued on Next Page

155


21 2000CC (DOHC) ENG - 2004-15 - 4 Cyl. - 87.5 MM Bore (MAZDA 3, 3 SPORT, MX-5, MIATA MX-5)DURATEC (Continued)Chain Tensioner BT5514 2004-2011 TIMING CHAIN TENSIONER; RIGHT UPPER;

EXC.2011 MX-5, MX-5 MIATABT5555 2004-2011 TIMING CHAIN TENSIONER ARM; EXC.2011 MX-5,

MX-5 MIATAChain Guide BG449 2004-2011 OIL PUMP CHAIN GUIDE; EXC.2011 MX-5, MX-5

MIATABG5556 2004-2011 TIMING CHAIN GUIDE; LEFT UPPER; EXC.2011 MX-5,

MX-5 MIATA22 2184CC (SOHC) ENG - 1988-92 - 4 Cyl. - 86.0 MM Bore 626 & MX-6 (12 VALVE INCLUDES

TURBOCHARGED)Belt B-0134 110 TEETHBelt Tensioner BT166Idler BT215

23 2184CC (SOHC) ENG - 1987-1993 - 4 Cyl. - 86.0 MM Bore B2200 (8V NON TURBOCHARGED ENG)Belt B-0134 110 TEETHBelt Tensioner BT166Idler BT215

24 2260CC (DOHC) ENG - 2003-13 - 4 Cyl. - 87.4 MM Bore (MAZDA 3,MAZDA 5,MAZDA 6,CX7)INCLUDES TURBOCHARGEDTiming Kit 3-0250S 2003 TO 09/2006 SOLD AS KIT ONLY; KIT INCLUDES (2)

CHAINS,(1) TENSIONER,(4) GUIDES,(1) CAM SPROCKET,(1)CRANK SPROCKET,(1) OIL PUMP SPROCKET MAZDA 3, MAZDA6; EXCLUDES VVT

3-0250S 2006-2007 SOLD AS KIT ONLY; KIT INCLUDES (2) CHAINS,(1)TENSIONER,(4) GUIDES,(1) CAM SPROCKET,(1) CRANKSPROCKET,(1) OIL PUMP SPROCKET MAZDA 5; EXCLUDES VVT

Chain Tensioner BT5514 2003 TO 09/2006 MAZDA 3, MAZDA 6; EXCLUDES VVTChain Guide BG5515 2003 TO 09/2006 MAZDA 3, MAZDA 6; EXCLUDES VVT

25 2300CC (DOHC) ENG - 2002-10 - 4 Cyl. - 87.4 MM Bore (B2300,TRIBUTE) GAS/ELECTRIC-GASDURATEC FORD ENGINETiming Kit 3-705S 2002-2009 KIT INCLUDES [705], [706F], (2) [S898], [S891],

[S893], [BT5513], [BT5514], [BT452], [BG449], [BG5515] (KITINCLUDES OIL PUMP CHAIN GUIDE) RWD B2300 ONLY;NORTH/SOUTH CONFIGURATION 8MM PITCH; NON-VVT

3-705SX KIT INCLUDES [705], [706F], [BT5513], [BT5514], [BT452],[BG449], [BG5515] (KIT INCLUDES OIL PUMP CHAIN GUIDE,DOES NOT INCLUDE SPROCKETS) RWD B2300 ONLY;NORTH/SOUTH CONFIGURATION 8MM PITCH; NON-VVT

Chain 705 2002-2009 138 LINKS B2300; TIMING CHAIN706F 2002-2009 54 LINKS B2300; OIL PUMP CHAIN

Cam Sprocket S898 2002-2009 B2300; 2 REQ.Crank Sprocket S891 2002-2009 B2300Oil Pump Sprocket S893 2002-2009 24 TEETH B2300Chain Tensioner BT452 2002-2009 B2300; OIL PUMP CHAIN TENSIONER

BT5513 2002-2009 B2300; PRIMARY CHAIN TENSIONER ARMBT5514 2002-2009 B2300; PRIMARY CHAIN TENSIONER; RIGHT UPPER

Chain Guide BG449 2002-2009 B2300; OIL PUMP CHAIN GUIDEBG5515 2002-2009 B2300; PRIMARY CHAIN GUIDE

26 2492CC (SOHC) ENG - 1998-01 - 4 Cyl. - 3.779 Bore (B2500 PICK-UP)Belt B-0276 131 TEETH

156


27 2497CC (DOHC) ENG - 1993-01 - V6 - 84.5 MM Bore (MX-6 1993-97)(626 1993-99)(MILLENIA1995-01)Belt B-0214 192 TEETHBelt Tensioner BT129 ARM

BT324 1993-1997 TENSIONERIdler BT128 LOWER

BT325 UPPER28 2555CC (OHC) ENG - 1987-88 - 4 Cyl. - 91.1 MM Bore (B2600 W/MITSUBISHI ENG.)

Timing Kit 3-102S KIT INCLUDES [3DR102-2] CAMSHAFT KIT & [8MMSR90-1]BALANCE SHAFT KIT

3DR102-2 KIT INCLUDES [3DR102], [S458], [S455], [BD31], [BD30] & [BT49](CAMSHAFT KIT)

8MMSR90-1 KIT INCLUDES [8MMSR90], [S407], [S567] (2), [BG48], [BG64] &[BG51] (BALANCE SHAFT KIT)

Balance Shaft Elim. Kit BSEK122 KIT INCLUDES CHAIN, OIL PUMP SHAFT PLUG, OIL GALLEYPLUG, OIL PUMP MOUNTING GASKET AND INSTRUCTIONSHEET



S455 19 TEETH INNERBalance Shaft Sprocket S567 17 TEETH (2) REQ.Chain Tensioner BT49 SLEEVEChain Guide BD30 CAMSHAFT; TENSION SIDE


29 2606CC (OHC) ENG - 1989-94 - 4 Cyl. - 92 MM Bore (1989-93 B2600 PICK-UP) (1989-94 MPV)Chain 3SR102 102 LINKS CAMSHAFT

8MMSR84 84 LINKS BAL. SHAFTChain Tensioner BT168Chain Guide BG169 TENSION SIDE

BG170 SLACK SIDEBG171 BAL. SHAFT LOWER RIGHTBG172 BAL. SHAFT LOWER LEFTBG173 1989-1994 BAL. SHAFT GUIDE UPPER- EXC. B2600

30 3.0 (2954CC) DOHC ENG - 2001-11 - 6 Cyl. - 89.0 MM Bore (MAZDA 6, MPV, TRIBUTE) FORDDURATECTiming Kit 3-708S 2001-2006 KIT INCLUDES (2) [708], [S929], (2) [BT5549], (2)

[BT5550], [BG5551], [BG5552] (NOTE: CAMSHAFT SPROCKETSARE INTEGRATED ONTO THE CAMSHAFTS) EXC. MAZDA 6

3-708S 2008-2009 KIT INCLUDES (2) [708], [S929], (2) [BT5549], (2)[BT5550], [BG5551], [BG5552] (NOTE: CAMSHAFT SPROCKETSARE INTEGRATED ONTO THE CAMSHAFTS) EXC. MAZDA 6

3-708SA 2003-2008 INCLUDES (2) [708], [S929], (2) [BT5549], (2) [BT5550],(2) [BG5553] (NOTE: VVT CAM SPROCKETS ARE NOTINCLUDED) MAZDA 6 W/ VVT ENG.

Chain 708 2001-2009 144 LINKS TIMING CHAIN; 2 REQ.Crank Sprocket S929 2001-2009 21 TEETHChain Tensioner BT5549 2001-2009 TIMING CHAIN TENSIONER; 2 REQ.

BT5550 2001-2009 TIMING CHAIN TENSIONER ARM; 2 REQ.Continued on Next Page

157


30 3.0 (2954CC) DOHC ENG - 2001-11 - 6 Cyl. - 89.0 MM Bore (MAZDA 6, MPV, TRIBUTE) FORDDURATEC (Continued)Chain Guide BG5551 2001-2009 TIMING CHAIN GUIDE; LEFT HAND; EXC. VVT

ENGINEBG5552 2001-2009 TIMING CHAIN GUIDE; RIGHT HAND; EXC. VVT

ENGINEBG5553 2003-2008 MAZDA 6; 2 REQ.; REPLACEMENT LINING FOR THE

R.H & L.H. TIMING CHAIN GUIDES LOCATED IN THE VVTHOUSING ASSEMBLY; LINING ONLY DOES NOT INCLUDEGUIDE ASSEMBLY

31 2954CC (DOHC) ENG - 1990-95 - V6 - 90 MM Bore (929 & 929S)Belt B-0183 1990-1994 239 TEETHIdler BT5222 1990-1995 L.H.

BT5223 1990-1995 UPPERBT5292 1990-1995 R.H.

32 2954CC (OHV) ENG - 1994-08 - V6 - 90 MM Bore (B3000 PICK-UP) VULCAN3pc Set 3-374S 1998 INCLUDES [374], [S636] & [S649]




S859 1999-2004 19 TEETH33 2954CC (SOHC) ENG - 1988-98 - V6 - 90.0 MM Bore (1988-91 929) (1989-98 MPV)

Belt B-0146 173 TEETH CAMSHAFT BELTIdler BT216 1988-1998 LEFT HAND; 2 REQ.

BT293 1988-1998 RIGHT HAND34 4.0-X (4016CC) OHV ENG - 1991-00 - V6 - 100.4 MM Bore (1991-94 NAVAJO) (1994-00 B4000

PICK-UP) FORD ENG.Timing Kit 3-3SRH64AS 1995-2000 KIT INCLUDES [3SRH64], [S650], [S821], [BT345],

[BG261]3-3SRH64S 1991-1994 KIT INCLUDES [3SRH64], [S650], [S651], [BT157] &

[BG261]3pc Set 3-3SRH64 1991-1994 INCLUDES [3SRH64], [S650] & [S651]

3-3SRH64A 1995-2000 INCLUDES [3SRH64], [S650] & [S821]Chain 3SRH64 64 LINKSCam Sprocket S650 38 TEETHCrank Sprocket S651 1991-1994 19 TEETH


BT345 1995-2000Chain Guide BG261

35 4.0-E (4016CC) SOHC ENG - 2001-10 - 6 Cyl. - 100.4 MM Bore (B4000) FORD ENGINETiming Kit 3-398S 2003-2009 KIT INCLUDES (3) TIMING CHAINS, (1) B. SHAFT

CHAIN, (2) CAM SPROCKETS, (2) JACKSHAFT SPROCKETS, (3)TENSIONERS, (1) TENSIONER RESERVOIR, (3) GUIDES, (2)WASHERS. SOLD AS KIT ONLY; ENTIRE KIT MUST BEREPLACED DUE TO OE UPGRADES TO THE COMPONENTS.A.W.D OR 4.W.D. ONLY; ENGINES WITH BALANCE SHAFT


158


35 4.0-E (4016CC) SOHC ENG - 2001-10 - 6 Cyl. - 100.4 MM Bore (B4000) FORD ENGINE (Continued)Timing Kit 3-398SA 2003-2009 KIT INCLUDES (3) TIMING CHAINS, (2) CAM

SPROCKETS, (2) JACKSHAFT SPROCKETS, (2) TENSIONERS,(6) GUIDES, (2) WASHERS. SOLD AS KIT ONLY; ENTIRE KITMUST BE REPLACED DUE TO OE UPGRADES TO THECOMPONENTS. R.W.D. ONLY; ENGINES W/OUT BALANCESHAFT

Balance Shaft Sprocket S875 2001-2009 21 TEETH

MERCEDES BENZEngine Year Line Engine Year Line Engine Year Line

4 Cyl.1.9 (1897CC) SOHC 1955-62 12.0 (1988CC) SOHC 1967-68 2

6 Cyl.2.2 (2195CC) SOHC 1951-66 34 Cyl.2.2 (2197CC) SOHC 1968-73 4

4 Cyl. (Continued)

2.3 (2307CC) SOHC 1974-78 56 Cyl.3.0 (2996CC) SOHC 1954-59 6


1 1.9 (1897CC) SOHC ENG - 1955-62 - 4 Cyl. - 85 MM Bore (180, 180A, 180B, 190, 190B, 190C, 190SL)Chain 3DR128 128 LINKS 180A, 180B, 190, 190B

3DR128 1955-1961 128 LINKS 190SL2 2.0 (1988CC) SOHC ENG - 1967-68 - 4 Cyl. - 87 MM Bore (200)

Chain 3DR130 130 LINKS 2003DR136 136 LINKS 200D/8

3 2.2 (2195CC) SOHC ENG - 1951-66 - 6 Cyl. - 80 MM Bore (219,220,220A,220B,220S,220SB,220SE)Chain 3DR122 1951-1960 122 LINKS 219

3DR122 1951-1965 122 LINKS 2203DR122 1954-1965 122 LINKS 220S3DR122 1955-1957 122 LINKS 220A3DR132 1959-1966 132 LINKS 220SE

4 2.2 (2197CC) SOHC ENG - 1968-73 - 4 Cyl. - 87 MM Bore (220 & 220D)Chain 3DR130 130 LINKS 220/8

3DR136 136 LINKS 220D/85 2.3 (2307CC) SOHC ENG - 1974-78 - 4 Cyl. - 94 MM Bore (230)

Chain 3DR130 130 LINKS6 3.0 (2996CC) SOHC ENG - 1954-59 - 6 Cyl. - 85 MM Bore (300SL)

Chain 3DR136 136 LINKS

159

MERCURY (INC. LINCOLN)Engine Year Line Engine Year Line Engine Year Line

4 Cyl.1.6-L (98) OHV 1971-72 11.6 (98) OHC 1981-85 21.6 (98) SOHC 1987-89 31.6-6,Z (98) 1991-94 41.8-8 DOHC 1991-96 51.9-9 (116) 1985-87 61.9-J (116) 1991-96 71.9-J (116) 1986-87 82.0-P (121) SOHC 1997-99 92.0-3 (121) DOHC 1995-02 102.0-H (122) DIESEL 1984-87 11122 (2000) OHC 1971-74 122.3 (2300) HSC 1984-94 132.3 (140) SOHC 1975-86 142.3-H,Z (140) DOHC 2005-09 156 Cyl.144 1960-63 164 Cyl.2.5-D (153) HSC 1986 176 Cyl.2.5-G,L (155) DOHC 1995-02 18170 1961-72 192.8-Z (171) OHV 1974-79 202.9 (177) OHV 1988-89 213.0-G,S,1 (182) DOHC 1996-11 22

6 Cyl. (Continued)

3.0-U,2 (182) OHV 1986-05 233.0-W,1 (183) SOHC 1993-98 243.3 (200) 1963-83 253.3-T (201) 1999-02 268 Cyl.221 1962-63 276 Cyl.223 1961-62 283.8 (232) OHV 1982-97 298 Cyl.239 1939-51 30239 1949-50 316 Cyl.4.0-E (244) SOHC 1998-10 324.1 (250) 1969-80 338 Cyl.255 1949-53 344.2 (255) 1980-82 35256 1954 366 Cyl.4.2-2 (256) OHV 2004-07 378 Cyl.260 OHV ENG 1962-65 384.6 (281) DOHC INTECH 1993-05 394.6 (281) SOHC 1991-11 40

8 Cyl. (Continued)

4.6-8 (281) SOHC 2006-10 41289 OHV 1963-68 42292 1961-62 43292 1955 445.0 (302) 1968-93 455.0-P (302) 1997-01 46312 1957-60 475.4-L (330) SOHC 1998-99 485.4-5 (330) SOHC 2005-13 495.4-A,R (330) DOHC 1999-04 50351C ENG 1969-74 51351M (MODIFIED) 1975-79 525.8-H,M (351W) 1969-81 53352 1961-62 54383 1958-59 55390 1962-70 56400 1971-79 57406 1962-63 58410 1966-67 59427 OHV 1963-69 60428 1966-70 61429 OHV 1968-73 62430 1958-65 63460 1968-78 64462 1966-68 65


1 1.6-L (98) OHV ENG - 1971-72 - 4 Cyl. - 3.19 Bore (CAPRI) 2737E ENG3pc Set 3-172S INCLUDES [172], [S422] & [S423]Chain 172 46 LINKSCam Sprocket S422 34 TEETHCrank Sprocket S423 17 TEETH

2 1.6 (98) OHC ENG - 1981-85 - 4 Cyl. - 3.147 Bore (LYNX)Belt B-067 97 TEETHCrank Sprocket S419 19 TEETHBelt Tensioner BT92Belt Guide BG95

3 1.6 (98) SOHC ENG - 1987-89 - 4 Cyl. - 3.147 Bore (TRACER)Belt B-0141 107 TEETHBelt Tensioner BT164

4 1.6-6,Z (98) ENG - 1991-94 - 4 Cyl. - 3.070 Bore (CAPRI) (CODE 6 T/C) (CODE Z NON T/C)Belt B-0179 145 TEETHBelt Tensioner BT213Idler BT214

5 1.8-8 DOHC ENG - 1991-96 - 4 Cyl. - 3.270 Bore (TRACER)Belt B-0179 145 TEETHBelt Tensioner BT213Idler BT214

6 1.9-9 (116) ENG - 1985-87 - 4 Cyl. - 3.230 Bore (1.9-9 2BC 1985-86) (1.9-9 CFI 1987)Belt B-067 97 TEETHCam Sprocket S638 38 TEETHCrank Sprocket S419 19 TEETHBelt Tensioner BT92Continued on Next Page

160

MERCURY (INC. LINCOLN) (Continued)LineNo. Part Title Part No Description

6 1.9-9 (116) ENG - 1985-87 - 4 Cyl. - 3.230 Bore (1.9-9 2BC 1985-86) (1.9-9 CFI 1987) (Continued)Belt Guide BG95Timing Cover MIC200 1985-1987 INNER

MOC200 1985-1987 OUTER7 1.9-J (116) ENG - 1991-96 - 4 Cyl. - 3.230 Bore (SFI)

Belt B-0194 97 TEETHBelt Tensioner BT350Belt Guide BG95

8 1.9-J (116) ENG - 1986-87 - 4 Cyl. - 3.230 Bore (EFI)Belt B-067 97 TEETHCam Sprocket S638 38 TEETHCrank Sprocket S419 19 TEETHBelt Tensioner BT92Belt Guide BG95Timing Cover MIC200 INNER

MOC200 OUTER9 2.0-P (121) SOHC ENG - 1997-99 - 4 Cyl. - 3.34 Bore TRACER

Belt B-0283 99 TEETHBelt Tensioner BT5406Belt Guide BG95

10 2.0-3 (121) DOHC ENG - 1995-02 - 4 Cyl. - 3.34 Bore (COUGAR, MYSTIQUE, - MFI)Belt B-0258 1995-1997 131 TEETH

B-0294 1998-2002 129 TEETHBelt Tensioner BT5390 1995-1997 MYSTIQUE; TENSIONERIdler BT5409 1995-1997 LEFT HAND IDLER

BT5410 1995-1997 RIGHT HAND IDLER11 2.0-H (122) DIESEL ENG - 1984-87 - 4 Cyl. - 3.390 Bore

Belt B-0103 1984-1987 148 TEETH CAMSHAFT BELT; FRONT12 122 (2000) OHC ENG - 1971-74 - 4 Cyl. - 3.575 Bore

Belt B-013 122 TEETH CAMSHAFT BELTCam Sprocket S424 38 TEETHBelt Tensioner BT10 CAMSHAFT BELT TENSIONER

13 2.3 (2300) HSC ENG - 1984-94 - 4 Cyl. - 3.68 Bore (CODE R CARB 1984) (CODE S E.F.I. H.O. ENG1985-91) (CODE X E.F.I. ENG 1985-94)Timing Kit 3-505SA KIT INCLUDES [505], [S617], [S618], [BT127]3pc Set 3-505S INCLUDES [505], [S617] & [S618]Chain 505 46 LINKSCam Sprocket S618 36 TEETHCrank Sprocket S617 18 TEETHChain Tensioner BT127

14 2.3 (140) SOHC ENG - 1975-86 - 4 Cyl. - 3.78 Bore (CODE A 1980-86) (CODE W 1979 CARB. T/C &1983-86 F.I. T/C) (CODE Y 1975-79) (CODE 6 LPG 1982-84)Belt B-014 129 TEETHCam Sprocket S446 38 TEETHCrank Sprocket S447 19 TEETHTiming Cover MIC100 1975-1986 INNER

15 2.3-H,Z (140) DOHC ENG - 2005-09 - 4 Cyl. - 3.44 Bore (MARINER 05-08, MILAN 06-09) DURATEC(VIN Z GAS, VIN H HYBRID)Chain 705 2005-2006 138 LINKS MARINER; PRIMARY TIMING CHAIN

705 From 12/3/2006 TO 2009 138 LINKS MILAN; PRIMARY TIMINGCHAIN

Chain Tensioner BT452 2005-2006 MARINER; OIL PUMP CHAIN

161


16 144 ENG - 1960-63 - 6 Cyl. - 3 1/2 BoreCam Thrust Plate MF1083pc Set 3-351S INCLUDES [351], [S308] & [S397]Chain 351 50 LINKSCam Sprocket S308 38 TEETHCrank Sprocket S397 19 TEETH

17 2.5-D (153) HSC ENG - 1986 - 4 Cyl. - 3.70 BoreTiming Kit 3-505SA KIT INCLUDES [505], [S617], [S618], [BT127]3pc Set 3-505S INCLUDES [505], [S617] & [S618]Chain 505 46 LINKSCam Sprocket S618 36 TEETHCrank Sprocket S617 18 TEETHChain Tensioner BT127

18 2.5-G,L (155) DOHC ENG - 1995-02 - V6 - 3.24 Bore (MFI)Timing Kit 3-392S 1996-2000 KIT INCLUDES (2) [392], [S833], (2) [BT406], (2)


Chain 392 61 LINKS 2 REQ.Crank Sprocket S833 18 TEETHChain Tensioner BT406 1996-2000 R.H. & L.H. HYDRAULIC TENSIONER; 2 REQ.

BT408A 1996-2000 TENSIONER ARM; 2 REQ.Chain Guide BG409 1996-2000 L.H.

BG410 1996-2000 R.H.19 170 ENG - 1961-72 - 6 Cyl. - 3 1/2 Bore


20 2.8-Z (171) OHV ENG - 1974-79 - V6 - 3.661 BoreGear Set 2760SA REPLACE AS A SET ONLY

21 2.9 (177) OHV ENG - 1988-89 - V6 - 3.66 Bore (MERKUR SCORPIO) FORD ENGINE3pc Set 3-3SR60 INCLUDES [3SR60], [S650] & [S651]Chain 3SR60 60 LINKSCam Sprocket S650 38 TEETHCrank Sprocket S651 19 TEETHChain Tensioner BT157Chain Guide BG187

22 3.0-G,S,1 (182) DOHC ENG - 1996-11 - V6 - 3.50 Bore(LS,MILAN,MONTEGO,SABLE,ZEPHYR,MARINER) 24V DURATEC INCLUDES TRUCKSTiming Kit 3-392S 1996-2000 KIT INCLUDES (2) [392], [S833], (2) [BT406], (2)


3-708S 2001-2007 KIT INCLUDES (2) [708], [S929], (2) [BT5549], (2)[BT5550], [BG5551], [BG5552] (NOTE: CAMSHAFT SPROCKETSARE INTEGRATED ONTO THE CAMSHAFTS) SABLE, MARINER,MONTEGO

3-708SA 2006-2009 INCLUDES (2) [708], [S929], (2) [BT5549], (2) [BT5550],(2) [BG5553] (NOTE: VVT CAM SPROCKETS ARE NOTINCLUDED) MILAN & ZEPHYR; REPLACEMENT LINING FORTHE R.H & L.H. TIMING CHAIN GUIDES LOCATED IN THE VVTHOUSING ASSEMBLY; LINING ONLY DOES NOT INCLUDEGUIDE ASSEMBLY


162


22 3.0-G,S,1 (182) DOHC ENG - 1996-11 - V6 - 3.50 Bore(LS,MILAN,MONTEGO,SABLE,ZEPHYR,MARINER) 24V DURATEC INCLUDES TRUCKS (Continued)Timing Kit 3-708SA 2008 TO 12/10/08 INCLUDES (2) [708], [S929], (2) [BT5549], (2)

[BT5550], (2) [BG5553] (NOTE: VVT CAM SPROCKETS ARE NOTINCLUDED) MARINER; REPLACEMENT LINING FOR THE R.H &L.H. TIMING CHAIN GUIDES LOCATED IN THE VVT HOUSINGASSEMBLY; LINING ONLY DOES NOT INCLUDE GUIDEASSEMBLY

Chain 392 1996-2000 61 LINKS 2 REQ.708 2001-2007 144 LINKS 2 REQ.

Crank Sprocket S833 2000 18 TEETHS929 2001-2007 21 TEETH

Chain Tensioner BT406 1996-2000 TIMING CHAIN TENSIONER; 2 REQ.BT408A 1996-2000 TIMING CHAIN TENSIONER ARM; 2 REQ.BT5549 2001-2007 TIMING CHAIN TENSIONER; 2 REQ.BT5550 2001-2007 TIMING CHAIN TENSIONER ARM; 2 REQ.

Chain Guide BG409 1996-2000 TIMING CHAIN GUIDE; LEFT HANDBG410 1996-2000 TIMING CHAIN GUIDE; RIGHT HANDBG5551 2001-2007 TIMING CHAIN GUIDE; LEFT HANDBG5552 2001-2007 TIMING CHAIN GUIDE; RIGHT HANDBG5553 2006-2009 MILAN, ZEPHYR W/ VVT ENG.; 2 REQ.;

REPLACEMENT LINING FOR THE R.H & L.H. TIMING CHAINGUIDES LOCATED IN THE VVT HOUSING ASSEMBLY; LININGONLY DOES NOT INCLUDE GUIDE ASSEMBLY

BG5553 2008 To 12/10/2008 MARINER W/VVT ENG.; 2 REQ.;REPLACEMENT LINING FOR THE R.H & L.H. TIMING CHAINGUIDES LOCATED IN THE VVT HOUSING ASSEMBLY; LININGONLY DOES NOT INCLUDE GUIDE ASSEMBLY

23 3.0-U,2 (182) OHV ENG - 1986-05 - V6 - 3.500 Bore (GAS, FLEX FUEL)3pc Set 3-374S INCLUDES [374], [S636] & [S649] 1986-98 EXC. 1992-94 TOPAZ

W/M.T.3-396S 1999-2003 INCLUDES [396], [S859], [S856]



Crank Sprocket S649 19 TEETH 1986-98 EXC. 1992-94 TOPAZ W/M.T.S749 1992-1994 19 TEETH TOPAZ W/M.T.S859 1999-2003 19 TEETH

24 3.0-W,1 (183) SOHC ENG - 1993-98 - V6 - 3.42 Bore (VILLAGER) NISSAN ENGBelt B-0104 1993 133 TEETH CAMSHAFT BELT

B-0249 1994-1998 133 TEETH CAMSHAFT BELTBelt Tensioner BT120

25 3.3 (200) ENG - 1963-83 - 6 Cyl. - 3.68 BoreCam Thrust Plate MF1083pc Set 3-351S INCLUDES [351], [S308] & [S397]Chain 351 50 LINKSCam Sprocket S308 38 TEETHCrank Sprocket S397 19 TEETH

26 3.3-T (201) ENG - 1999-02 - V6 - 3.60 Bore VILLAGERBelt B-0249 133 TEETH CAMSHAFT BELTBelt Tensioner BT120 CAMSHAFT BELT TENSIONER

163




29 3.8 (232) OHV ENG - 1982-97 - V6 - 3.81 Bore (VIN 3 1982-87) (VIN 4 1987-97) (VIN C 1984) (VIN RSUPERCHARGED 1989-90)3pc Set 3-365SA 1982-1987 INCLUDES [365], [S542] & [S539]


376 1988-1997 60 LINKSCam Button CB200 1982-1987Cam Sprocket S542 1982-1987 42 TEETH

S700 1988-1997 42 TEETHCrank Sprocket S539 21 TEETHChain Tensioner BT323 From 5/10/89 TO 1997

30 239 ENG - 1939-51 - 8 Cyl. - 3 3/16 BoreCam Gear 4706 1942 44 TEETH ALUMINUM

4706 1946-1948 44 TEETH ALUMINUM31 239 ENG - 1949-50 - 8 Cyl. - 3.19 Bore M-47 L-HEAD

Gear Set 2727S INCLUDES [2702] & [2701]Cam Gear 2702 44 TEETH ALUMCrank Gear 2701 22 TEETH

32 4.0-E,K (244) SOHC ENG - 1998-10 - V6 - 3.95 Bore (MOUNTAINEER) (VIN E GAS) (VIN K FLEXFUEL)Timing Kit 3-398S 2003-2010 KIT INCLUDES (3) TIMING CHAINS, (1) B. SHAFT

CHAIN, (2) CAM SPROCKETS, (2) JACKSHAFT SPROCKETS, (3)TENSIONERS, (1) TENSIONER RESERVOIR, (3) GUIDES, (2)WASHERS. SOLD AS KIT ONLY; ENTIRE KIT MUST BEREPLACED DUE TO OE UPGRADES TO THE COMPONENTS.A.W.D. OR 4.W.D. ONLY; ENGINES WITH BALANCE SHAFT

3-398SA 2003-2010 KIT INCLUDES (3) TIMING CHAINS, (2) CAMSPROCKETS, (2) JACKSHAFT SPROCKETS, (2) TENSIONERS,(6) GUIDES, (2) WASHERS. SOLD AS KIT ONLY; ENTIRE KITMUST BE REPLACED DUE TO OE UPGRADES TO THECOMPONENTS. R.W.D. ONLY; ENGINES W/OUT BALANCESHAFT

Balance Shaft Sprocket S875 1998-2003 21 TEETH33 4.1 (250) ENG - 1969-80 - 6 Cyl. - 3.68 Bore

Cam Thrust Plate MF10834 255 ENG - 1949-53 - 8 Cyl. - 3.19 Bore

Gear Set 2727S INCLUDES [2702] & [2701]Cam Gear 2702 44 TEETH ALUMCrank Gear 2701 22 TEETH CAST IRON

35 4.2 (255) ENG - 1980-82 - 8 Cyl. - 3.68 BoreCam Thrust Plate MF1253pc Set 3-358SA INCLUDES [358], [S430] & [S431]Continued on Next Page

164


35 4.2 (255) ENG - 1980-82 - 8 Cyl. - 3.68 Bore (Continued)Chain 358 58 LINKSCam Sprocket S430 42 TEETHCrank Sprocket S431 21 TEETH

36 256 ENG - 1954 - 8 Cyl. - 3.625 Bore3pc Set 3-344S INCLUDES [344], [S249] & [S250]Chain 344 56 LINKSCam Sprocket S249 42 TEETHCrank Sprocket S250 21 TEETH

37 4.2-2 (256) OHV ENG - 2004-07 - 6 Cyl. - 3.81 Bore (MONTEREY) TRITON3pc Set 3-376S INCLUDES [376], [S700] & [S539]Chain 376 60 LINKSCam Sprocket S700 42 TEETHCrank Sprocket S539 21 TEETH


39 4.6 (281) DOHC ENG - 1993-05 - V8 - 3.55 Bore INCLUDES TRUCKS (2003-05 AVIATOR, 1995-02CONTINENTAL, 1993-98 MARK VIII, 2003-04 MARAUDER) INTECHTiming Kit 3-387SGF 1998-2000 REPLACES [3-387SF]; KIT INCLUDES (2) [387], (2)

[189], [S764], [S766], (4) [S790P], [S843], [BT402], [BT403],[BT404], [BT405], [BD393], [BD394], [BG391], [BG392G] FITS ALLMODELS

3-387SHF 1993-1997 REPLACES [3-387SD] AND [3-387SE]; KIT INCLUDES(2) [387], (2) [189], [S764], [S766, (4) [S790], [S843], [BT402],[BT403], [BT404], [BT405], [BD393], [BD394], [BG391], [BG392G]FITS ALL MODELS

3-387SJF 2001-2002 KIT INCLUDES (2) [387], (2) [189], [S764], [S766], (4)[S790P], [S869], [BT402], [BT403], [BT404], [BT405], [BD393],[BD394], [BG391], [BG392G] CONTINENTAL ONLY

3-387SKF 2003-2005 KIT INCLUDES (2) [387], (2) [189], [S764], [S766],[S869], (4) [S790P], [BT404], [BT405], [BT429], [BT430], [BD393],[BD394], [BG391G], [BG392G] 2003-04 MARAUDER; 2003-05AVIATOR ONLY

Chain 189 44 LINKS SECONDARY; 2 REQ.387 116 LINKS PRIMARY; 2 REQ.

Cam Thrust Plate Spacer S803SPCam Sprocket S764 42 TEETH LEFT HAND; PRIMARY

S766 42 TEETH RIGHT HAND; PRIMARYS790 1993-1997 20 TEETH RIGHT HAND & LEFT HAND; SECONDARY;

4 REQ.S790P 1998-2005 20 TEETH RIGHT HAND & LEFT HAND; SECONDARY

(4) REQ.; NOT INTERCHANGEABLE W/ S790Crank Sprocket S843 1993-2000 21 TEETH 1 PC. DESIGN

S869 2001-2005 21 TEETH 1 PC. DESIGN W/ HUB; HUB ACTS AS ASPACER

Chain Tensioner 5497B OE YR3Z-6K282-AA TENSIONER BOLT; 2 REQ.; MUST BE USEDW/ BD393 & BD394

BT402 1993-2002 LEFT HAND; PRIMARY; ADAPTER PLATE NOTREQUIRED


165


39 4.6 (281) DOHC ENG - 1993-05 - V8 - 3.55 Bore INCLUDES TRUCKS (2003-05 AVIATOR, 1995-02CONTINENTAL, 1993-98 MARK VIII, 2003-04 MARAUDER) INTECH (Continued)Chain Tensioner BT403 1993-2002 RIGHT HAND; PRIMARY; ADAPTER PLATE NOT

REQUIREDBT404 LEFT HAND; SECONDARY TENSIONERBT405 RIGHT HAND; SECONDARY TENSIONERBT429 2003-2005 RIGHT HAND; PRIMARYBT430 2003-2005 LEFT HAND; PRIMARY

Damper BD393 LEFT HAND TENSIONER ARM; MUST USE W/ 5497B PIVOTBOLT (NOT INCLUDED)

BD394 RIGHT HAND TENSIONER ARM; MUST USE W/ 5497B PIVOTBOLT (NOT INCLUDED)

Chain Guide BG391 1993-2002 LEFT HANDBG391G 2003-2005 LEFT HAND; MOUNTING BOLTS NOT SUPPLIEDBG392G RIGHT HAND; TWO MOUNTING BOLTS NOT SUPPLIED;

REPLACES BG392Adaptor Plate AP275 1993-1995 2 REQ.

40 4.6 (281) SOHC ENG - 1991-11 - V8 - 3.55 Bore (VIN W 1991-08 ROMEO ENG) (VIN 6 1996WINDSOR ENG) (VIN V FLEX FUEL 2006-11) 16VTiming Kit 3-387SA 1991-2000 REPLACES [3-387S] AND [3-387SB]; SILENT CHAIN

DOES NOT REQUIRE ADAPTER PLATES; KIT INCLUDES (2)387, S766 R.H., S764 L.H., S843 (1PC), BT402 L.H., BT403 R.H.,BD322 R.H., BD321 L.H., BG320 R.H., BG319 L.H (SILENT CHAINUPGRADE; WILL RETROFIT 1991-1992 ROLLER CHAINSYSTEM)


3-387SG 2001 To 10/2002 KIT INCLUDES (2) [387], [S766], [S764], [S869],[BG333], [BG334], [BD321], [BD322], [BT402], [BT403] (SILENTCHAIN) (DOES NOT REQUIRE (2) ADAPTER PLATES)

3-387SGX FROM 10/2002 TO 2011 SILENT CHAIN; DOES NOT REQUIRE(2) ADAPTER PLATES; KIT INCLUDES (2) [387], [BG333],[BG334], [BD321], [BD322], [BT429], [BT430] (NOTE: DOES NOTINCLUDE SPROCKETS) (2002-11 GRAND MARQUIS,TOWNCAR) (2002-05 MOUNTAINEER)

3-387SIF From 10/2002 TO 2011 KIT INCLUDES (2) [387], [S766], [S764],[S869], [BG333], [BG334], [BD321], [BD322], [BT429], [BT430](SILENT CHAIN) (DOES NOT REQUIRE (2) ADAPTER PLATES)

Chain 185 1992-1993 116 LINKS (2) REQ.; STANDARD CHAIN387 1994-2011 116 LINKS (2) REQ. SILENT CHAIN

Cam Thrust Plate Spacer S802SP 1994-2006Cam Sprocket S736 1992 42 TEETH LEFT HAND

S740 1992 42 TEETH RIGHT HANDS760 1993 42 TEETH LEFT HANDS762 1993 42 TEETH RIGHT HANDS764 1994-2011 42 TEETH LEFT HANDS766 1994-2011 42 TEETH RIGHT HAND

Crank Sprocket S751 1992 21 TEETH (2) REQ.S791 1993 21 TEETH (2) REQ.S843 1994-2000 21 TEETH (1 PC. DESIGN)S869 2001-2011 21 TEETH

Chain Tensioner BT402 1992 To 10/2002 LEFT HAND, ADAPTER PLATES NOT REQUIREDContinued on Next Page

166


40 4.6 (281) SOHC ENG - 1991-11 - V8 - 3.55 Bore (VIN W 1991-08 ROMEO ENG) (VIN 6 1996WINDSOR ENG) (VIN V FLEX FUEL 2006-11) 16V (Continued)Chain Tensioner BT403 1992 To 10/2002 RIGHT HAND, ADAPTER PLATES NOT

REQUIRED AFTER 1995BT429 From 10/2002 TO 2011 RIGHT HANDBT430 From 10/2002 TO 2011 LEFT HAND

Damper BD321 1992-2011 (ARM) LEFT HANDBD322 1992-2011 (ARM) RIGHT HAND

Chain Guide BG315 1992 RIGHT HANDBG316 1992 LEFT HANDBG319 1993-2000 RIGHT HANDBG320 1993-2000 LEFT HANDBG333 2001-2011 RIGHT HAND; WINDSOR STYLE GUIDEBG334 2001-2011 LEFT HAND; WINDSOR STYLE GUIDE

Adaptor Plate AP275 1992-1995 (2) REQ.41 4.6-8 (281) SOHC ENG - 2006-2010 - 8 Cyl. - 3.55 Bore (MOUNTAINEER) 24V

Timing Kit 3-387SGX SILENT CHAIN; DOES NOT REQUIRE (2) ADAPTER PLATES;KIT INCLUDES (2) [387], [BG333], [BG334], [BD321], [BD322],[BT429], [BT430] (NOTE: DOES NOT INCLUDE SPROCKETS)





Crank Sprocket S869 21 TEETH (TIMING MARK ON HUB)Chain Tensioner BT429 RIGHT HAND

BT430 LEFT HANDDamper BD321 LEFT HAND; ARM

BD322 RIGHT HAND; ARMChain Guide BG333 RIGHT HAND

BG334 LEFT HAND42 289 OHV ENG - 1963-68 - 8 Cyl. - 4.00 Bore

Cam Thrust Plate MF125 1965-1968 AFTER CHG. L73pc Set 3-356S 1964-1965 INCLUDES [356], [S326] & [S327] TO CHANGE L7;

W/17/32" TOOTH WIDTH3-358S 1965-1968 INCLUDES [358], [S406] & [S431] AFTER CHG. L7;

W/13/32" TOOTH WIDTHChain 356 1964-1965 58 LINKS TO CHANGE L7; W/17/32" TOOTH WIDTH

358 1965-1968 58 LINKS AFTER CHG. L7; W/13/32" TOOTH WIDTHCam Sprocket S326 1964-1965 42 TEETH TO CHANGE L7; W/17/32" TOOTH WIDTH

S406 1965-1968 42 TEETH AFTER CHG. L7; W/13/32" TOOTH WIDTHCrank Sprocket S327 1964-1965 21 TEETH TO CHANGE L7; W/17/32" TOOTH WIDTH

S431 1965-1968 21 TEETH AFTER CHG. L7; W/13/32" TOOTH WIDTH43 292 ENG - 1961-62 - 8 Cyl. - 3.75 Bore (COLONY PARK, COMMUTER, METEOR, MONTEREY)


44 292 ENG - 1955 - 8 Cyl. - 3.75 Bore (CUSTOM, MONTCLAIR, MONTEREY)3pc Set 3-344S INCLUDES [344], [S249] & [S250]Chain 344 56 LINKSCam Sprocket S249 42 TEETHCrank Sprocket S250 21 TEETH

167


45 5.0 (302) ENG - 1968-93 - 8 Cyl. - 4.000 BoreCam Thrust Plate MF125 1968 To 3/21/84 W/O H.O.

MF126 From 3/21/84 TO 1993 NOTE: IF USING [3-163SB] SET OR[S612] SPROCKET ON ENGINES BEFORE 3/21/84, YOU MUSTUSE [MF126] (3.356"L) THRUST PLATE RATHER THAN [MF125]OR STOCK (3.882"L) PLATE.

3pc Set 3-163SA 1984 To 3/21/84 INCLUDES [163], [S468] & [S531] W/H.O.3-163SB From 3/21/84 To 9/1/88 INCLUDES [163], [S612] & [S531] W/H.O.3-163SB From 9/1/88 TO 1993 INCLUDES [163], [S612] & [S531]3-358S 1968 To 5/2/72 INCLUDES [358], [S406] & [S431]3-358SA From 5/2/72 TO 1988 INCLUDES [358], [S430] & [S431] EXC. H.O.3-700SA 1991-1993 INCLUDES [395], [S818], [S819] SILENT CHAIN - USE

AS SET ONLY (COUGAR)Chain 163 1984 To 9/1/88 58 LINKS ROLLER CHAIN - W/H.O.

163 From 9/1/88 TO 1993 58 LINKS ROLLER CHAIN358 1968 To 9/1/88 58 LINKS EXC. H.O. ENG.395 1991-1993 58 LINKS COUGAR; SILENT CHAIN

Cam Sprocket S406 1968 To 5/2/72 42 TEETH EXC. H.O. ENG.S430 1977-1988 42 TEETH TOWN CAR, CONTINENTAL, COUGAR,

MARK VII EXC. LSCS612 From 3/21/84 TO 1985 42 TEETH W/H.O.; USE W/163 CHAIN

ONLYS612 1990-1993 42 TEETH USE W/163 CHAIN ONLYS818 1991-1993 42 TEETH COUGAR; USE W/370 CHAIN ONLY

Crank Sprocket S431 1968 To 9/1/88 21 TEETH W/O H.O.S531 1984-1989 21 TEETH W/H.O. ENG.S531 1989-1991 21 TEETH W/O H.O.; USE W/163 ROLLER CHAINS819 1991-1993 21 TEETH COUGAR; USE W/370 CHAIN

46 5.0-P (302) ENG - 1997-01 - 8 Cyl. - 4.00 Bore (MOUNTAINEER)3pc Set 3-163SB 1997-2000 INCLUDES [163], [S612] & [S531] USE AS COMPLETE

SET ONLYChain 163 1997-2000 58 LINKS ROLLER CHAIN FOR USE WITH S531 &

S612395 58 LINKS SILENT CHAIN FOR USE WITH S818 & S819

Cam Sprocket S612 1997-2000 42 TEETH MUST BE USED WITH 163 CHAINS818 42 TEETH MUST BE USED WITH 370 CHAIN

Crank Sprocket S531 1997-2000 21 TEETH MUST BE USED WITH 163 CHAINS819 21 TEETH MUST BE USED WITH 370 CHAIN


48 5.4-L (330) SOHC ENG - 1998-99 - 8 Cyl. - 3.55 Bore (NAVIGATOR)Timing Kit 3-391SB KIT INCLUDES (2) [391], [S764], [S766], [S843], [BT402], [BT403],

[BT411], [BT412], [BG413], [BG414]Chain 391 122 LINKS 2 REQ.Cam Sprocket S764 42 TEETH LEFT HAND

S766 42 TEETH RIGHT HANDCrank Sprocket S843 21 TEETH (1 PC. DESIGN)Chain Tensioner BT402 LEFT HAND TENSIONER, ADAPTER PLATE NOT REQUIRED

BT403 RIGHT HAND, TENSIONER; ADAPTER PLATE NOT REQUIREDBT411 LEFT HAND; TENSIONER ARMBT412 RIGHT HAND; TENSIONER ARM


168


48 5.4-L (330) SOHC ENG - 1998-99 - 8 Cyl. - 3.55 Bore (NAVIGATOR) (Continued)Chain Guide BG413 LEFT HAND

BG414 USE LONGER TOP BOLT; FORD OE [W709818-S437] (NOTSUPPLIED) RIGHT HAND

49 5.4-5 (330) SOHC ENG - 2005-13 - 8 Cyl. - 3.55 Bore (MARK LT, NAVIGATOR) LINCOLN 24V TRITONTiming Kit 3-391SC KIT INCLUDES (2) [391], [S869], [BT429], [BT430], [BT411],

[BT412], [BG413], [BG414], KIT DOES NOT INCLUDE CAMSPROCKETS


VCTA-1000 2005-2011 MOUNTING BOLT INCLUDED 2 REQ.; 2007-08 MARKLT; 2005-11 NAVIGATOR



Variable Cam TimingHousing

VCTH-1000L 2005-2012 INCLUDES VARIABLE CAM SOLENOID & MOUNTINGGASKET LEFT HAND

VCTH-1000R 2005-2012 INCLUDES VARIABLE CAM SOLENOID & MOUNTINGGASKET RIGHT HAND

Crank Sprocket S869 21 TEETHChain Tensioner BT411 LEFT HAND; TENSIONER ARM

BT412 RIGHT HAND; TENSIONER ARMBT429 RIGHT HAND; TENSIONERBT430 LEFT HAND; TENSIONER

Chain Guide BG413 LEFT HAND; W/GUIDE RAILBG414 USE LONGER TOP BOLT; FORD OE [W709818-S437] (NOT

SUPPLIED) RIGHT HAND50 5.4-A,R (330) DOHC ENG - 1999-04 - V8 - 3.55 Bore BLACKWOOD, NAVIGATOR (INTEC)

Timing Kit 3-391SA 1999-2000 KIT INCLUDES (2)[391], (2)[189], [S843], (4)[S790P],[BT402], [BT403], [BT404], [BT405], (2)[BT417], [BG415], [BG416]

3-391SE 2003-2004 KIT INCLUDES (2) [391], (2) [189], [S869], (4) [S790P],[BT404], [BT405], (2) [BT417], [BT429], [BT430], [BG415], [BG416](HUB DESIGN CRANK SPROCKET)

3-391SF 2001-2002 KIT INCLUDES (2) [391], (2) [189], [S869], (4) [S790P],[BT402], [BT403], [BT404], [BT405], (2) [BT417], [BG415], [BG416](HUB DESIGN CRANK SPROCKET)

Chain 189 44 LINKS SECONDARY (2) REQ.391 122 LINKS PRIMARY (2) REQ.

Cam Thrust Plate Spacer S803SP (2) REQCam Sprocket S790P 20 TEETH SECONDARY (4) REQ.; NOT INTERCHANGEABLE

W/S790Crank Sprocket S843 1999-2000 21 TEETH (1) REQ. AFTER 1999 (1 PC. DESIGN)

S869 2001-2004 21 TEETH 1 PC DESIGN WITH HUB - HUB ACTS AS ASPACER

Chain Tensioner BT402 1999-2002 LEFT HAND; PRIMARY; ADAPTER PLATE NOTREQUIRED

BT403 1999-2002 RIGHT HAND; PRIMARY; ADAPTER PLATE NOTREQUIRED

BT404 LEFT HAND; SECONDARYBT405 RIGHT HAND; SECONDARYBT417 TENSIONER ARM ASSY; (2) REQBT429 2003-2004 RIGHT HAND; PRIMARY; PLASTICBT430 2003-2004 LEFT HAND; PRIMARY; PLASTIC

Chain Guide BG415 1999-2004 LEFT HANDBG416 1999-2004 RIGHT HAND

169


51 351C ENG - 1969-74 - 8 Cyl. - 4.00 Bore (CLEVELAND, CLEVELAND BOSS, CLEVELAND COBRAJET) DOES NOT INCLUDE VANS3pc Set 3-494SB 1970-1974 INCLUDES [494], [S420] & [S493] W/4BC

3-494SB 1972 INCLUDES [494], [S420] & [S493] W/2BC3-498SB 1973-1974 INCLUDES [498], [S436] & [S475] W/2BC

Chain 494 1970-1974 48 LINKS W/4BC494 1972 48 LINKS W/2BC498 1973-1974 48 LINKS W/2BC

Cam Sprocket S420 1969-1972 36 TEETH W/2BCS420 1970-1974 36 TEETH W/4BCS436 1973-1974 36 TEETH W/2BC


52 351M ENG - 1975-79 - 8 Cyl. - 4.00 Bore (MODIFIED) DOES NOT INCLUDE VANS3pc Set 3-498SB INCLUDES [498], [S436] & [S475]Chain 498 48 LINKSCam Sprocket S436 36 TEETHCrank Sprocket S475 18 TEETH

53 5.8-H,M (351W) ENG - 1969-81 - 8 Cyl. - 4.00 Bore (WINDSOR, WINDSOR H.O. ENGINE)3pc Set 3-358S 1969 To 5/2/72 INCLUDES [358], [S406] & [S431]

3-358SA From 5/2/72 TO 1981 INCLUDES [358], [S430] & [S431] EXC. H.O.Chain 358 58 LINKSCam Sprocket S406 1969 To 5/2/72 42 TEETH

S430 From 5/2/72 TO 1981 42 TEETH EXC. H.O.Crank Sprocket S431 21 TEETH EXC. H.O.



56 390 ENG - 1962-70 - 8 Cyl. - 4.05 Bore3pc Set 3-169S 1963-1970 INCLUDES [169], [S410] & [S331] HEAVY DUTY


494 48 LINKS STANDARD DUTYCam Sprocket S284 1962 36 TEETH STANDARD DUTY

S410 1963-1970 48 TEETH HEAVY DUTYCrank Sprocket S321 18 TEETH STANDARD DUTY

S331 1963-1970 24 TEETH HEAVY DUTY57 400 ENG - 1971-79 - 8 Cyl. - 4.000 Bore

3pc Set 3-494SB 1971-1972 INCLUDES [494], [S420] & [S493]3-498SB 1973-1979 INCLUDES [498], [S436] & [S475]




170


58 406 ENG - 1962-63 - 8 Cyl. - 4.13 BoreChain 494 48 LINKSCam Sprocket S284 1962 36 TEETH

59 410 ENG - 1966-67 - 8 Cyl. - 4.05 Bore3pc Set 3-169S INCLUDES [169], [S410] & [S331] H.D.



S331 24 TEETH H.D.60 427 OHV ENG - 1963-69 - 8 Cyl. - 4.234 Bore

3pc Set 3-169S INCLUDES [169], [S410] & [S331] HEAVY DUTY3-494SA INCLUDES [494], [S396] & [S321] STANDARD DUTY


Cam Sprocket S410 48 TEETH HEAVY DUTYCrank Sprocket S321 1964-1969 18 TEETH STANDARD DUTY

S331 24 TEETH HEAVY DUTY61 428 ENG - 1966-70 - 8 Cyl. - 4.13 Bore

3pc Set 3-169S INCLUDES [169], [S410] & [S331] H.D.3-494SA INCLUDES [494], [S396] & [S321] STANDARD DUTY

Chain 169 64 LINKS H.D.494 48 LINKS STANDARD DUTY

Cam Sprocket S410 48 TEETH H.D.Crank Sprocket S321 18 TEETH STANDARD DUTY

S331 24 TEETH H.D.62 429 OHV ENG - 1968-73 - 8 Cyl. - 4.36 Bore

3pc Set 3-491S 1972-1973 INCLUDES [491], [S420], [S421] EXC. 1972 POLICE3-491SA 1969-1971 INCLUDES (491] CHAIN, [S420] CAM SPROCKET,

[S493] CRANK SPROCKET EXC. 1971 POLICE3-491SA 1971-1972 INCLUDES (491] CHAIN, [S420] CAM SPROCKET,

[S493] CRANK SPROCKET POLICEChain 491 52 LINKSCam Sprocket S420 36 TEETHCrank Sprocket S493 1969-1971 18 TEETH

S493 1971-1972 18 TEETH POLICE63 430 ENG - 1958-65 - 8 Cyl. - 4.300 Bore


64 460 ENG - 1968-78 - 8 Cyl. - 4.36 Bore3pc Set 3-491S 1972-1978 INCLUDES [491], [S420], [S421] STANDARD ENG

3-491S 1975-1976 INCLUDES [491], [S420], [S421] POLICE ENG. ONLY3-491SA 1968-1971 INCLUDES (491] CHAIN, [S420] CAM SPROCKET,

[S493] CRANK SPROCKET STANDARD ENG3-491SA 1973-1974 INCLUDES (491] CHAIN, [S420] CAM SPROCKET,

[S493] CRANK SPROCKET POLICE ENG3-491SA 1977-1978 INCLUDES (491] CHAIN, [S420] CAM SPROCKET,

[S493] CRANK SPROCKET POLICE ENGChain 491 52 LINKSCam Sprocket S420 36 TEETHCrank Sprocket S493 1968-1971 18 TEETH STANDARD ENG.

S493 1973-1974 18 TEETH POLICE ENG.Continued on Next Page

171


64 460 ENG - 1968-78 - 8 Cyl. - 4.36 Bore (Continued)Crank Sprocket S493 1977-1978 18 TEETH POLICE ENG


MGEngine Year Line Engine Year Line Engine Year Line

4 Cyl.948CC OHV 1962 11098CC OHV 1962-67 21250CC OHV 1947-54 31466CC OHV 1955 4

4 Cyl. (Continued)

1489CC OHV 1954-61 51493CC OHV 1975-79 61798CC OHV 1965-80 7

6 Cyl.2912CC OHV 1969 83532CC OHV 1975-76 9


1 948CC OHV ENG - 1962-62 - 4 Cyl. - 2.4775 Bore (MIDGET) 9CG ENG.Chain 3SR52 52 LINKS

2 1098CC OHV ENG - 1962-67 - 4 Cyl. - 2.542 Bore (MIDGET MK.I, II & 1100 SEDAN)Chain 3SR52 52 LINKS

3 1250CC OHV ENG - 1947-54 - 4 Cyl. - 2.6181 Bore (TC, TD & TF)Chain 3DR60 60 LINKS

4 1466CC OHV ENG - 1955 - 4 Cyl. - 72.0 MM Bore (TF)Chain 3DR60 60 LINKS

5 1489CC OHV ENG - 1954-61 - 4 Cyl. - 73.0 MM Bore 14H ENGChain 3SR52 52 LINKS

6 1493CC OHV ENG - 1975-79 - 4 Cyl. - 73.7 MM Bore (MIDGET MK.III)Chain 3DR62 62 LINKS

7 1798CC OHV ENG - 1965-80 - 4 Cyl. - 80.3 MM BoreChain 3DR54 1971 54 LINKS

3SR52 1972-1974 52 LINKS8 2912CC OHV ENG - 1969 - 6 Cyl. - 3.280 Bore (MGC, MGC/GT)

Chain 3DR54 54 LINKS9 3532CC OHV ENG - 1975-76 - 6 Cyl. - (MGB)

Chain 359 54 LINKS

MITSUBISHIEngine Year Line Engine Year Line Engine Year Line

4 Cyl.1.5 (G15B) OHC 1985-90 11.5 (1468CC) OHC 1987-94 21.5 (4G15) SOHC 1991-02 31.6 (G32B) OHC 1985-88 41.6 (4G61) DOHC 1989 51.6-Y (4G61) DOHC 1991-92 61.8 (G62B) OHC 1983-88 71.8 (4G37) OHC 1990-94 81.8 (4G93) SOHC 1992-02 92.0 (G63B) SOHC 1983-89 102.0 (4G63) SOHC 1989-93 112.0-Y (420A) DOHC 1996-99 12

4 Cyl. (Continued)

2.0 (4G63,4G63T) DOHC 1989-99 132.0 (4G63) DOHC 2003-06 142.3 (4D55) 1983-85 152.4 (G64B) SOHC 1985-93 162.4 (4G64) DOHC 1994 172.4 (4G64) SOHC 1994-96 182.4 (4G64) SOHC 1993-05 192.4 (4G69) SOHC 2004-12 202.4 SOHC ENG 2004 212.6 (G54B) SOHC 1983-89 226 Cyl.3.0 (6G72) SOHC 1988-90 23

6 Cyl. (Continued)

3.0 (6G72) SOHC 1989-99 243.0 (6G72) DOHC 1991-99 253.0 (6G72) SOHC 1995-05 263.5 (6G74) DOHC 1994-96 273.5 (6G74) SOHC 1997-04 283.7 (226) SOHC 2006-09 293.8 (3797CC) SOHC 2003-05 303.8 (6G75) SOHC 2005-12 318 Cyl.4.7-N (285) SOHC 2006-07 32

172

MITSUBISHI (Continued)LineNo. Part Title Part No Description

1 1.5 (G15B) OHC ENG - 1985-90 - 4 Cyl. - 75.5 MM Bore (MIRAGE-1468CC) (8V)Belt B-0128 1987-1988 92 TEETH

B-073 1985-1986 92 TEETHBelt Tensioner BD33

2 1.5-J (1468CC) OHC ENG - 1987-94 - 4 Cyl. - 75.5 MM Bore (PRECIS1468CC) 8VBelt B-0128 1990-1992 92 TEETH


3 1.5 (4G15) SOHC ENG - 1991-02 - 4 Cyl. - 75.5 MM Bore (MIRAGE--1468CC) (12V)Belt B-0191 From 5/90 TO 1996 92 TEETH

B-0289 1997-2002 107 TEETH4 1.6 (G32B) OHC ENG - 1985-88 - 4 Cyl. - 77 MM Bore (MIRAGE--1597CC TURBO)

Belt B-093 120 TEETHOil Pump Sprocket S8003 24 TEETH 24 TEETHBelt Tensioner BD32 1985 To 12/86

BT160 1987-19885 1.6 (4G61) DOHC ENG - 1989 - 4 Cyl. - 76.9 MM Bore (MIRAGE-TURBO)

Belt B-0165 151 TEETHBelt Tensioner BT194 IDLER

BT225 LOWER ADJUSTER6 1.6-Y (4G61) DOHC ENG - 1991-92 - 4 Cyl. - 76.9 MM Bore (MIRAGE GS) NON-TURBO

Belt B-0165 151 TEETHBelt Tensioner BT194 IDLER

BT225 TENSIONER7 1.8 (G62B) OHC ENG - 1983-88 - 4 Cyl. - 80.6 MM Bore (CORDIA,TREDIA--1795CC)

Belt B-0158 1986-1988 122 TEETH CAMSHAFT BELTB-089 1983-1985 122 TEETH CAMSHAFT BELT

Belt Tensioner BT105 CAMSHAFT BELT TENSIONERBT106 1983 To 4/87 BALANCE SHAFT BELT TENSIONERBT161 1988 BALANCE SHAFT BELT TENSIONER

8 1.8 (4G37) OHC ENG - 1989-94 - 4 Cyl. - 80.6 MM Bore (ECLIPSE--1755CC W/BALANCE SHAFT)Belt B-0158 1990-1994 122 TEETH CAMSHAFT

B-090 1990-1994 55 TEETH BAL. SHAFTBelt Tensioner BD38 BAL. SHAFT

BT160 CAMSHAFT9 1.8 (4G93) SOHC ENG - 1992-02 - 4 Cyl. - 81 MM Bore (EXPO LRV 1992-94) (MIRAGE 1993-02)

(1834CC)Belt B-0201 1992-1994 121 TEETH EXPO

B-0201 1993-1996 121 TEETH MIRAGEB-0288 1997-2002 116 TEETH MIRAGE

10 2.0 (G63B) SOHC ENG - 1983-89 - 4 Cyl. - 85 MM Bore (1984-88 CORDIA) (1984-88 TREDIA)(1983-89 PICK-UP 1997CC)Belt B-0158 1986-1989 122 TEETH CAMSHAFT BELT

B-089 1983 To 7/86 122 TEETH CAMSHAFT BELTB-090 1983-1987 55 TEETH BALANCE SHAFT BELT

Belt Tensioner BT105 CAMSHAFT BELT TENSIONERBT106 1983 To 4/87 BALANCE SHAFT BELT TENSIONERBT161 From 5/87 TO 1989 BALANCE SHAFT BELT TENSIONER

173


11 2.0 (4G63) SOHC ENG - 1989-93 - 4 Cyl. - 85 MM Bore (GALANT--1997CC)Belt B-0155 1989-1992 122 TEETH CAMSHAFT

B-0168 1993 65 TEETH BALANCE SHAFTB-0232 1993 123 TEETH CAMSHAFT

Belt Tensioner BT106 1989-1992 BALANCE SHAFTBT196 1989-1992 CAMSHAFTBT197 1993 BALANCE SHAFT

12 2.0-Y (420A) DOHC ENG - 1996-99 - 4 Cyl. - 87.5 MM Bore (ECLIPSE) (1997CC)Belt B-0246 150 TEETH

13 2.0 (4G63,4G63T) DOHC ENG - 1989-99 - 4 Cyl. - 85 MM Bore (GALANT, ECLIPSE) (INCLUDESTURBOCHARGED) (1997CC)Belt B-0167 153 TEETH CAMSHAFT

B-0168 65 TEETH BALANCE SHAFTBelt Tensioner BT194 1989-1994 CAMSHAFT

BT197 1989-1994 BALANCE SHAFTBT225 1989-1994 LOWER ADJUSTER

14 2.0 (4G63) DOHC ENG - 2003-06 - 4 Cyl. - 85 MM Bore (LANCER) (1997,2000CC) TURBOBelt B-0167 2003-2004 153 TEETH

15 2.3 (4D55) ENG - 1983-85 - 4 Cyl. - 91.2 MM Bore (TRUCKS--2346CC TURBO DIESEL)Belt B-091 1983-1985 163 TEETH CAMSHAFT

B-092 1983-1985 83 TEETH BAL. SHAFTCam Sprocket S8004 48 TEETHCrank Sprocket S8005 24 TEETH TIMING

S8007 32 TEETH BAL. SHAFT16 2.4 (G64B) SOHC ENG - 1985-93 - 4 Cyl. - 86.5 MM Bore (1985-87 GALANT) (1987-90 VAN) (1990-93

MIGHTY MAX) (2351CC)Belt B-0124 1985-1990 123 TEETH GALANT & VAN; CAMSHAFT

B-0124 1991-1992 123 TEETH MIGHTY MAX; CAMSHAFTBelt Tensioner BT105 CAMSHAFT

BT106 1985 To 4/87 BALANCE SHAFTBT161 From 5/87 TO 1988 BALANCE SHAFT

17 2.4 (4G64) DOHC ENG - 1994 - 4 Cyl. - 86.5 MM Bore (GALANT--2351CC)Belt B-0168 65 TEETH BALANCE SHAFT BELT

B-0256 154 TEETH CAMSHAFT BELTBelt Tensioner BT197 BALANCE SHAFT BELT TENSIONER

18 2.4 (4G64) SOHC ENG - 1994-96 - 4 Cyl. - 86.5 MM Bore (MIGHTY MAX) 8V (2351CC)Belt B-0168 65 TEETH BALANCE SHAFT BELT

B-0229 123 TEETH CAMSHAFT BELTBelt Tensioner BT105 CAMSHAFT BELT TENSIONER

BT197 BALANCE SHAFT BELT TENSIONER19 2.4 (4G64) SOHC ENG - 1993-05- 4 Cyl. - 86.5 MM Bore (ECLIPSE 96-05) (EXPO 93-95) (GALANT

94-03) (MONTERO SPORT 97-99) (OUTLANDER 2003) 16V (2351CC)Belt B-0168 65 TEETH BALANCE SHAFT

B-0230 1993-1999 124 TEETH CAMSHAFT; EXPO, ECLIPSEB-0230 1994-1998 124 TEETH CAMSHAFT; GALANTB-0232 1999-2003 123 TEETH CAMSHAFT; GALANTB-0232 2000-2004 123 TEETH CAMSHAFT; ECLIPSEB-0332 2004-2005 122 TEETH CAMSHAFT; GALANT

Belt Tensioner BT197 BALANCE SHAFT BELT TENSIONER

174


20 2.4 (4G69) SOHC ENG - 2004-12 - 4 Cyl. - 87.0 MM Bore (ECLIPSE,GALANT,LANCER,OUTLANDER)(GRANDIS - MEXICO) 16V (2378CC)Belt B-0168 2004 65 TEETH OUTLANDER; BALANCE SHAFT

B-0332 2004-2009 122 TEETH CAMSHAFT BELT21 2.4 SOHC ENG - 2004 - 4 Cyl. - 87.0 MM Bore (LANCER) 16V (2400CC)

Belt B-0332 122 TEETH CAMSHAFT22 2.6 (G54B) SOHC ENG - 1983-89 - 4 Cyl. - 91.1 MM Bore (STARION TURBO, MONTERO,MIGHTY

MAX TRUCKS--2555CC)Timing Kit 3-102S KIT INCLUDES [3DR102-2] CAMSHAFT KIT & [8MMSR90-1]





Chain 3DR102 102 LINKS CAMSHAFT CHAIN8MMSR90 90 LINKS BALANCE SHAFT CHAIN


S455 19 TEETH INNERBalance Shaft Sprocket S567 17 TEETH 2 REQ.Chain Tensioner BT49Chain Guide BD30 TIMING CHAIN GUIDE; TENSION SIDE

BD31 TIMING CHAIN GUIDE; SLACK SIDEBG48 BALANCE SHAFT CHAIN GUIDE; LOWER LEFTBG51 BALANCE SHAFT CHAIN GUIDE; LOWER RIGHTBG64 BALANCE SHAFT CHAIN GUIDE; UPPER RIGHT

23 3.0 (6G72) SOHC ENG - 1988-90 - V6 - 89.0, 91.1 MM Bore (1988 GALANT) (1989-90 SIGMA)Belt Tensioner BT195

24 3.0 (6G72) SOHC ENG - 1989-99 - V6 - 91.1 MM Bore (3000 GT 1997-99, DIAMANTE 1992-96,MIGHTY MAX 1990-94, MONTERO 1989-96, MONTERO SPORT 1989-90, 1997-99) 12VBelt B-0139 1989-1994 149 TEETH

B-0139 1995-1996 149 TEETH DIAMANTE ONLYB-0139 1997-1999 149 TEETH 3000GT

Belt Tensioner BT19525 3.0 (6G72) DOHC ENG - 1991-99 - V6 - 91.2 MM Bore (3000GT 1991-99 & DIAMANTE

1992-95--2972CC)Belt B-0195 257 TEETHBelt Tensioner BT271 RIGHT HAND; TENSIONER PULLEYIdler BT227 LEFT HAND; IDLER PULLEY

26 3.0 (6G72) SOHC ENG - 1995-05 - V6 - 91.1 MM Bore (2000-05 ECLIPSE) (1999-03 GALANT)(1995-96 MONTERO) (1997-03 MONTERO SPORT) 24VBelt B-0259 187 TEETHCam Sprocket S866 1997-2003 50 TEETH MONTERO SPORT RIGHT HAND

S866 1999-2005 50 TEETH ECLIPSE, GALANTBelt Tensioner BT195 1995-1996 BELT TENSIONER

BT271 RIGHT HAND; TENSIONER PULLEYBT5121 1997-2005 BELT TENSIONER

Idler BT227 LEFT HAND; IDLER PULLEY

175


27 3.5 (6G74) DOHC ENG - 1994-96 - V6 - 93.0 MM Bore (1994-96 MONTERO) (3497CC)Belt B-0253 148 TEETHBelt Tensioner BT271 RIGHT HAND; TENSIONER PULLEYIdler BT227 LEFT HAND; IDLER PULLEY

28 3.5 (6G74) SOHC ENG - 1997-04 - V6 - 93.0 MM Bore (DIAMANTE 1997-04) (MONTERO 1997-02)(MONTERO SPORT 1999-04)Belt B-0287 195 TEETH INTERFERENCE APPLICATIONCam Sprocket S866 50 TEETH DIAMANTE

S866 2001-2002 50 TEETH MONTEROBelt Tensioner BT271 RIGHT HAND; TENSIONER PULLEY

BT5120 DIAMANTE; RIGHT LOWER; TENSIONER ARMBT5120 1999-2004 MONTERO SPORT; TENSIONER ARMBT5121 BELT TENSIONER

Idler BT227 LEFT HAND; IDLER PULLEY29 3.7 (226) SOHC ENG - 2006-09 - 6 Cyl. - 93.0 MM Bore (RAIDER) MAGNUM CHRYSLER ENGINE

Timing Kit 3-393SB KIT INCLUDES [393], (2) [194], [BT418], [BT431], [BT432], (2)[BT433], [BG434], [BG435] THIS KIT CONTAINS NOSPROCKETS. SPROCKETS MUST BE PURCHASEDSEPERATELY TO COMPLETE KIT;

Chain 194 94 LINKS SECONDARY (2) REQ.393 70 LINKS PRIMARY

Cam Sprocket S824 26 TEETH LEFT HANDS868 26 TEETH RIGHT HAND;W/NGC SPROCKET

Crank Sprocket S861 25 TEETHIdler Sprocket S863 50 TEETH DOES NOT INCLUDE IDLER GEAR SHAFTChain Tensioner BT418 PRIMARY

BT431 RIGHT HAND; SECONDARY TENSIONERBT432 LEFT HAND; SECONDARY TENSIONERBT433 SECONDARY ARM (2) REQ.

Chain Guide BG434 RIGHT HAND SECONDARYBG435 LEFT HAND SECONDARY

30 3.8 (3797CC) SOHC ENG - 2003-05 - V6 - 95 MM Bore (2004 ENDEAVOR, 2003-05 MONTERO)(3797CC)Belt B-0287 2004 195 TEETH ENDEAVOR

B-0320 201 TEETH MONTEROCam Sprocket S866 50 TEETHBelt Tensioner BT271 RIGHT HAND; TENSIONER PULLEY

BT5121 TIMING BELT TENSIONERIdler BT227 LEFT HAND; IDLER PULLEY

31 3.8 (6G75) SOHC ENG - 2005-12 - V6 - 95 MM Bore (GALANT,ENDEAVOR,ECLIPSE,MONTERO) 24V(3828CC)Belt B-0287 195 TEETH EXCLUDES MONTERO; INTERFERENCE ENGINE

APPLICATIONB-0320 2005-2006 201 TEETH MONTERO; INTERFERENCE ENGINE

APPLICATIONCam Sprocket S866 50 TEETHBelt Tensioner BT271 RIGHT HAND; TENSIONER PULLEYIdler BT227 LEFY HAND; IDLER PULLEY

32 4.7-N (285) SOHC ENG - 2006-07 - 8 Cyl. - 93.0 MM Bore (RAIDER) MAGNUM CHRYSLER ENGINETiming Kit 3-393SC KIT INCLUDES [393], (2) [394], [S852], [S870], [S861], [BT418],

[BT419], [BT420], (2) [BD421], (2) [BG422], [S863], [S865] W/NGCCAM SPROCKET; DOES NOT INCLUDE INSTALLATION BOLTS

Chain 393 70 LINKS PRIMARYContinued on Next Page

176


32 4.7-N (285) SOHC ENG - 2006-07 - 8 Cyl. - 93.0 MM Bore (RAIDER) MAGNUM CHRYSLER ENGINE(Continued)Chain 394 53 LINKS SECONDARY (2) REQ.Cam Sprocket S852 30 TEETH LEFT HAND

S870 30 TEETH RIGHT HAND; W/NGC TARGET WHEELCrank Sprocket S861 25 TEETHIdler Sprocket S863 50 TEETH PRIMARY

S865 30 TEETH SECONDARYChain Tensioner BT418 PRIMARY TENSIONER

BT419 HYD RIGHT HAND; SECONDARY TENSIONERBT420 HYD LEFT HAND; SECONDARY TENSIONER

Damper BD421 SECONDARY TENSIONER ARM (2) REQ.Chain Guide BG422 (2) REQ.

NISSAN/DATSUNEngine Year Line Engine Year Line Engine Year Line

4 Cyl.1.2L (1237CC) A12 OHV 1979-82 11.3L (1288CC) A13 OHV 1973-74 21.4L (1393CC) A14 OHV 1975-82 31.5L (1488CC) E15T OHC 1983-84 41.5L (1488CC) A15 OHV 1979-82 51.5L (1488CC) E15,E15SOHC

1982-83 6

1.6L (1595CC) L16 OHC 1969-73 71.6L (1597CC) CA16DEDOHC

1987 8

1.6L (1597CC)E16,E16I,E16S OHC

1983-88 9

1.6L (1597CC) GA16DEDOHC

1991-99 10

1.6L (1597CC) GA16I OHC 1989-90 111.7L (1688CC) CD17DIESEL SOHC

1983-86 12

1.8L (1770CC) L18 OHC 1973-74 131.8L (1798CC) MR18DEDOHC

2007-13 14

1.8L (1797CC) MR18DEDOHC

2010-13 15

1.8L (1809CC) CA18DEDOHC

1988-89 15

1.8L (1809CC) CA18ETOHC

1984-86 16

1.8L (1809CC) QG18DEDOHC

2000-06 17

4 Cyl. (Continued)

2.0L (1952CC) L20B OHC 1974-80 182.0 (1952CC) Z20 SOHC 1983-86 192.0L (1952CC) Z20E,Z20SSOHC

1980-81 20

2.0L (1974CC) CA20EOHC

1984-89 21

2.0L (1974CC) CA20SOHC

1982-83 22

2.0L (1982CC) U20 OHC 1967-70 232.0L (1997CC) MR20DEDOHC

2007-12 24

2.0L (1998CC) SR20DEDOHC

1991-01 25

2.2L (2164CC) SD22DIESEL OHV

1981-83 26

2.2L (2182CC) Z22 &Z22E OHC

1981-83 27

2.4L (2389CC) KA24DEDOHC

1991-04 28

2.4L (2389CC) KA24ESOHC

1989-97 29

2.4L (2389CC) Z24,Z24IOHC

1983-89 30

6 Cyl.2.4L (2393CC) L24 OHC 1970-73 312.4L (2393CC) L24E OHC 1977-84 32

4 Cyl.2.5L (2488CC) SD25DIESEL OHV

1983-86 33

2.5L (2500CC) QR25DEDOHC

2002-13 34

6 Cyl.2.6L (2565CC) L26 OHC 1974-75 352.8L (2753CC)L28E,L28ET OHC

1975-83 36

2.8L (2793CC) LD28DIESEL SOHC

1981-83 37

3.0L (2960CC)VG30,VG30I,VG30T SOHC

1984-89 38

3.0L (2960CC)VG30DE,VG30DETTDOHC

1990-96 39

3.0L (2960CC) VG30ESOHC

1985-98 40

3.0L (2988CC) VQ30DEDOHC

1995-01 41

VG33ER (SOHC) 2001-04 423.3L (3275CC) VG33ESOHC

1996-04 43

4.0L (3954CC) VQ40DEDOHC

2005-14 44

8 Cyl.5.6L (5552CC) VK56DEDOHC

2004-13 45


1 1.2L (1237CC) A12 OHV ENG - 1979-82 - 4 Cyl. - 75.0 MM Bore (1979-82 210 A12 1237CC)Timing Kit 3DR54-1 KIT INCLUDES [3DR54], [S478], [S477] & [BT05]Chain 3DR54 54 LINKS

2 1.3L (1288CC) A13 OHV ENG - 1973-74 - 4 Cyl. - 73.0 MM Bore (MODEL 1300, B210 1288CC)Timing Kit 3DR54-1 KIT INCLUDES [3DR54], [S478], [S477] & [BT05]Chain 3DR54 54 LINKS

177

NISSAN/DATSUN (Continued)LineNo. Part Title Part No Description

3 1.4L (1393CC) A14 OHV ENG - 1975-82 - 4 Cyl. - 76.0 MM Bore (1975-78 B210) (1978-82 210)(1978-80 310) (1976-78 F10 1393CC)Timing Kit 3DR54-1 KIT INCLUDES [3DR54], [S478], [S477] & [BT05]Chain 3DR54 54 LINKS

4 1.5L (1488CC) E15T OHC ENG - 1983-84 - 4 Cyl. - 76.0 MM Bore (PULSAR NX 1488CC)Belt B-077 106 TEETHCrank Sprocket S557 20 TEETHBelt Tensioner BT75

5 1.5L (1488CC) A15 OHV ENG - 1979-82 - 4 Cyl. - 76.0 MM Bore (1981 310) (1979-82 210 1491CC)Timing Kit 3DR54-1 KIT INCLUDES [3DR54], [S478], [S477] & [BT05]Chain 3DR54 54 LINKS

6 1.5L (1488CC) E15,E15S OHC ENG - 1982-83 - 4 Cyl. - 76.0 MM Bore (1982 310 E15) (1982-83SENTRA E15S 1491CC)Belt B-077 106 TEETHCrank Sprocket S557 20 TEETHBelt Tensioner BT75

7 1.6L (1595CC) L16 OHC ENG - 1969-73 - 4 Cyl. - 83.0 MM Bore (1969-73 PL510) (1969-72 PL521PICKUP) (1969-73 PL620 PICKUP 1595CC)Timing Kit 3DR110-1 1969-1971 KIT INCLUDES [3DR110], [S462], [S463], [BT07],

[BD27] & [BD28]Chain 3DR110 110 LINKSCam Sprocket S462 1969-1971 40 TEETHCrank Sprocket S463 20 TEETHChain Tensioner BT07Damper BD27 1969-1973 UPPER

8 1.6L (1597CC) CA16DE DOHC ENG - 1987 - 4 Cyl. - 76.0 MM Bore (PULSAR NX 1597CC)Belt B-0137 151 TEETH

9 1.6L (1597CC) E16,E16I,E16S OHC ENG - 1983-88 - 4 Cyl. - 76.0 MM Bore (1983-86 PULSAR &SENTRA E16) (1987-88 PULSAR NX E16I) (1987-88 SENTRA E16S)Belt B-077 106 TEETHCrank Sprocket S557 20 TEETHBelt Tensioner BT75

10 1.6L (1597CC) GA16DE DOHC ENG - 1991-99 - 4 Cyl. - 76.0 MM Bore (1991-99 SENTRA, 1991-93NX, 1995-98 200SX)Timing Kit 3-191S KIT INCLUDES [190], [191], [S720], [S731], [S737], [BG233],

[BG234], [BT229], [BT230]; DOES NOT CONTAIN VVT SPROCKETChain 190 80 LINKS CRANK TO IDLER; LOWER

191 54 LINKS CAM TO CAM; UPPERCam Sprocket S720 25 TEETH EXHAUSTCrank Sprocket S731 18 TEETHIdler Sprocket S737 36 & 25 TEETHChain Tensioner BT229 UPPER

BT230 LOWERChain Guide BG231 UPPER- SLACK SIDE RIGHT HAND

BG232 UPPER- TENSION SIDE LEFT HANDBG233 LOWER- TENSION SIDE LEFT HAND (NOTE: USE 08120-8161E

BOLTS W/THIS GUIDE - NOT SUPPLIED)BG234 LOWER- SLACK SIDE RIGHT HAND

11 1.6L (1597CC) GA16I OHC ENG - 1989-90 - 4 Cyl. - 76.0 MM Bore (SENTRA & PULSAR NX)Timing Kit 3SR92-1 KIT INCLUDES [3SR92], [S686], [S693], [BT179], [BG180] &

[BG181]Continued on Next Page

178


11 1.6L (1597CC) GA16I OHC ENG - 1989-90 - 4 Cyl. - 76.0 MM Bore (SENTRA & PULSAR NX)(Continued)Chain 3SR92 92 LINKSCam Sprocket S686 38 TEETHCrank Sprocket S693 19 TEETHChain Tensioner BT179Chain Guide BG180 TENSION SIDE

BG181 LOOSE SIDE12 1.7L (1688CC) CD17 DIESEL SOHC ENG - 1983-86 - 4 Cyl. - 80.0 MM Bore (1983-86 SENTRA BASE,

DX,SE,XE)Belt B-096 117 TEETH CAMSHAFT - EXC. CANADA

B-097 76 TEETH INJ. PUMP- EXC. CANADACam Sprocket S8026 42 TEETHInj. Pump Drive Sprocket S635 33 TEETHBelt Tensioner BT118 CAMSHAFTBelt Guide BG119 CAMSHAFT

13 1.8L (1770CC) L18 OHC ENG - 1973-74 - 4 Cyl. - 85.0 MM Bore (1973 PL610) (1974 PL710) (1974PL620)Timing Kit 3DR110-1 KIT INCLUDES [3DR110], [S462], [S463], [BT07], [BD27] & [BD28]Chain 3DR110 110 LINKSCam Sprocket S462 40 TEETH EXC. 620 (1973)Crank Sprocket S463 20 TEETHChain Tensioner BT07Damper BD27 1973-1974 UPPER

14 1.8L (1798CC) MR18DE DOHC ENG - 2007-13 - 4 Cyl. - 84.0 MM Bore (07-12 VERSA) (09-13 CUBE)Timing Kit 3-0430S 2007-2011 SOLD AS KIT ONLY; KIT INCLUDES (2) CHAINS,(2)

TENSIONERS,(3) GUIDES,(1) CAM SPROCKET,(1) CRANKSPROCKET, (1) BALANCE SHAFT SPROCKET

15 1.8L (1809CC) CA18DE DOHC ENG - 1988-89 - 4 Cyl. - 83.0 MM Bore (PULSAR NX SE)Belt B-0137 151 TEETH

16 1.8L (1809CC) CA18ET OHC ENG - 1984-86 - 4 Cyl. - 83.0 MM Bore (200SX)Belt B-0100 95 TEETHCam Sprocket S572 40 TEETHCrank Sprocket S559 20 TEETHBelt Tensioner BT76

17 1.8L (1809CC) QG18DE DOHC ENG - 2000-06 - 4 Cyl. - 80 MM Bore (SENTRA CA, GXE, S, XE)Timing Kit 3-724S SOLD AS KIT ONLY; KIT INCLUDES (1) CHAIN,(1)

TENSIONER,(3) GUIDES,(1) CAM SPROCKET,(1) CRANKSPROCKET, (1) GASKET, (3) SEALS

18 2.0L (1952CC) L20B OHC ENG - 1974-80 - 4 Cyl. - 85.0 MM Bore (1977-80 510) (1974-76 610)(1975-78 620) (1974 710) (1979-80 720) (1976-80 200SX)Timing Kit 3DR114-1 KIT INCLUDES [3DR114], [S462], [S463], [BT07], [BD27] & [BD28]Chain 3DR114 114 LINKSCam Sprocket S462 40 TEETHCrank Sprocket S463 20 TEETHChain Tensioner BT07Damper BD27 1974-1980 UPPER

19 2.0 (1952CC) Z20 SOHC ENG - 1983-86 - 4 Cyl. - 85.0 MM Bore (720 Z20 ENG)Timing Kit 3DR102-1 KIT INCLUDES [3DR102], [S462], [S463], [BT07], [BG127] &

[BG55]Chain 3DR102 102 LINKS CAMSHAFTCam Sprocket S462 40 TEETHContinued on Next Page

179


19 2.0 (1952CC) Z20 SOHC ENG - 1983-86 - 4 Cyl. - 85.0 MM Bore (720 Z20 ENG) (Continued)Crank Sprocket S463 20 TEETHChain Tensioner BT07Chain Guide BG127 LEFT

BG55 RIGHT20 2.0L (1952CC) Z20E,Z20S SOHC ENG - 1980-81 - 4 Cyl. - 85.0 MM Bore (1980-81 200SX Z20E)

(1980-81 510 Z20S)Timing Kit 3DR102-1 KIT INCLUDES [3DR102], [S462], [S463], [BT07], [BG127] &

[BG55]Chain 3DR102 102 LINKS CAMSHAFTCam Sprocket S462 40 TEETHCrank Sprocket S463 20 TEETHChain Tensioner BT07Chain Guide BG127 LEFT

BG55 RIGHT21 2.0L (1974CC) CA20E OHC ENG - 1984-89 - 4 Cyl. - 84.5 MM Bore (1984-88 200SX) (1984-89

STANZA SEDAN) (1984-85 & 87 STANZA HATCHBACK) (1986-89 STANZA WAGON)Belt B-078 98 TEETHCam Sprocket S572 40 TEETHCrank Sprocket S559 20 TEETHBelt Tensioner BT76

22 2.0L (1974CC) CA20S OHC ENG - 1982-83 - 4 Cyl. - 24.5 MM Bore (STANZA)Belt B-078 98 TEETHCam Sprocket S572 1982 To 11/82 40 TEETHCrank Sprocket S559 20 TEETHBelt Tensioner BT76

23 2.0L (1982CC) U20 OHC ENG - 1967-70 - 4 Cyl. - 87.2 MM Bore (2000)Chain 3DR54 54 LINKS 1ST CHAIN

3DR94 94 LINKS 2ND CHAIN24 2.0L (1997CC) MR20DE DOHC ENG - 2007-12 - 4 Cyl. - 84.0 MM Bore (SENTRA)

Timing Kit 3-0430S 2007-2011 SOLD AS KIT ONLY; KIT INCLUDES (2) CHAINS,(2)TENSIONERS,(3) GUIDES,(1) CAM SPROCKET,(1) CRANKSPROCKET, (1) BALANCE SHAFT SPROCKET

25 2.0L (1998CC) SR20DE DOHC ENG - 1991-01 - 4 Cyl. - 86.0 MM Bore (200SX, SENTRA, NX)(LUCINO, TSURU - MEXICO)Timing Kit 3-3SRH124S 1991-1997 KIT INCLUDES [3SRH124], (2) [S724], [S699], [BT245],

[BG246], BG248], [BG247]Chain 3SRH124 124 LINKSCam Sprocket S724 36 TEETH (2) REQ.Crank Sprocket S699 18 TEETHChain Tensioner BT245Chain Guide BG246 1991-1998 LEFT HAND

BG247 1991-1998 RIGHT HANDBG248 1991-1997 UPPER

26 2.2L (2164CC) SD22 DIESEL OHV ENG - 1981-83 - 4 Cyl. - 83.0 MM Bore (720)Cam Gear 2050 56 TEETHCrank Gear 2051 28 TEETH

27 2.2L (2182CC) Z22 & Z22E OHC ENG - 1981-83 - 4 Cyl. - 87.0 MM Bore (720 1981-83 Z22) (200SX1982-83 Z22E)Timing Kit 3DR102-1 KIT INCLUDES [3DR102], [S462], [S463], [BT07], [BG127] &

[BG55]Chain 3DR102 102 LINKS CAMSHAFTContinued on Next Page

180


27 2.2L (2182CC) Z22 & Z22E OHC ENG - 1981-83 - 4 Cyl. - 87.0 MM Bore (720 1981-83 Z22) (200SX1982-83 Z22E) (Continued)Cam Sprocket S462 40 TEETHCrank Sprocket S463 20 TEETHChain Tensioner BT07Chain Guide BG127 LEFT HAND

BG55 RIGHT HAND28 2.4L (2389CC) KA24DE DOHC ENG - 1991-04 - 4 Cyl. - 89.8 MM Bore (1991-98 240SX) (1993-01

ALTIMA) (1998-04 FRONTIER) (2000-04 XTERRA)Timing Kit 3-3DRH48 1991-1997 KIT INCLUDES [3DRH48], [3SRH92], [S699], (2 [S778],

[BG237], [BG238], [BG239], [BG240], [BT235], [BT236] KIT DOESNOT INCLUDE IDLER SPROCKET

3-3DRH48 1998 KIT INCLUDES [3DRH48], [3SRH92], [S699], (2 [S778],[BG237], [BG238], [BG239], [BG240], [BT235], [BT236] 240SX; KITDOES NOT INCLUDE IDLER SPROCKET

3-4210SA 1998-2004 SOLD AS KIT ONLY; KIT INCLUDES (2) CHAINS,(2)TENSIONERS,(2) GUIDES,(2) CAM SPROCKETS,(1) IDLERSPROCKET,(1) CRANK SPROCKET, (1) SEAL, (3) BOLTS, (2)SHIMS, (4) GASKETS; NOTE: SHIMS MUST BE PLACED BEHINDTHE CURVE RAIL PIVOT BOLT. THE CURVE RAIL MUST BEFREE TO MOVE ALTIMA,FRONTIER,XTERRA

Chain 3DRH48 1991-1997 48 LINKS CAMS TO IDLER3DRH48 1998 48 LINKS 240SX; CAMS TO IDLER3SRH92 1991-1997 92 LINKS CRANK TO IDLER3SRH92 1998 92 LINKS 240SX; CRANK TO IDLER

Cam Sprocket S778 1991-1997 19 TEETH (2) REQ.- DOUBLE ROWS778 1998 19 TEETH 240SX;(2) REQ.- DOUBLE ROW

Crank Sprocket S699 18 TEETH SINGLE ROWChain Tensioner BT235 1991-1997 LOWER

BT235 1998 240SX; LOWERBT236 1991-1997 UPPERBT236 1998 240SX; UPPER

Chain Guide BG237 1991-1997 UPPERBG237 1998 240SX; UPPERBG238 1991-1997 UPPER LEFT HANDBG238 1998 240SX; UPPER LEFT HANDBG239 1991-1997 LOWER RIGHT HANDBG239 1998 240SX; LOWER RIGHT HANDBG240 1991-1997 LOWER LEFT HANDBG240 1998 240SX; LOWER LEFT HAND

29 2.4L (2389CC) KA24E SOHC ENG - 1989-97 - 4 Cyl. - 89.0 MM Bore (1989-90 240SX) (1990-92STANZA SEDAN) (D21 1990-94) (1990 AXXESS) (1995-97 PICKUP)Timing Kit 3SR102-1 KIT INCLUDES [3SR102], [S694], [S699], [BT176], [BG177] &

[BG178]Chain 3SR102 102 LINKSCam Sprocket S694 36 TEETHCrank Sprocket S699 18 TEETHChain Tensioner BT176Chain Guide BG177 TENSION SIDE

BG178 LOOSE SIDE

181


30 2.4L (2389CC) Z24,Z24I SOHC ENG - 1983-89 - 4 Cyl. - 89.0 MM Bore (1983-86 720 Z24) (1986-89D21 TRUCK Z24) (1987-89 PATHFINDER Z24) (1987-89 VAN Z24I)Timing Kit 3DR106D-1 1983-1988 KIT INCLUDES [3DR106D], [S462], [S463], [BT07],

[BG127] & [BG128]Chain 3DR106D 1983-1988 106 LINKS

3SR106D 1989 106 LINKSCam Sprocket S462 1983-1988 40 TEETH


S701 1989 20 TEETHChain Tensioner BT07Chain Guide BG127 LEFT HAND

BG128 RIGHT HAND31 2.4L (2393CC) L24 OHC ENG - 1970-73 - 6 Cyl. - 83.0 MM Bore (240Z)

Timing Kit 3DR110-2 KIT INCLUDES [3DR110], [S462], [S463], [BT08], [BD27] & [BD28]Chain 3DR110 110 LINKSCam Sprocket S462 40 TEETHCrank Sprocket S463 20 TEETHChain Tensioner BT08Damper BD27 1970-1973 UPPER

32 2.4L (2393CC) L24E OHC ENG - 1977-84 - 6 Cyl. - 83.0 MM Bore (1977-81 810) (1982-84 MAXIMA)Timing Kit 3DR110-2 KIT INCLUDES [3DR110], [S462], [S463], [BT08], [BD27] & [BD28]Chain 3DR110 110 LINKSCam Sprocket S462 40 TEETHCrank Sprocket S463 20 TEETHChain Tensioner BT08Damper BD27 1977-1984 UPPER

33 2.5L (2488CC) SD25 DIESEL OHV ENG - 1983-86 - 4 Cyl. - 89.0 MM Bore (720 TRUCK)Cam Sprocket 2064 112 TEETH

34 2.5L (2500CC) QR25DE DOHC ENG - 2002-13 - 4 Cyl. - 89 MM Bore(ALTIMA,FRONTIER,ROGUE,SENTRA,X-TRAIL) GAS/ELECTRIC-GASTiming Kit 3-4212S 2002-2006 SOLD AS KIT ONLY; VARIABLE CAM SPROCKET NOT

INCLUDED; KIT INCLUDES (2) CHAINS,(2) TENSIONERS,(3)GUIDES,(1) CAM SPROCKET,(1) CRANK SPROCKET, (1) SEALKIT ALTIMA,SENTRA ONLY

3-4212SA 2005-2011 SOLD AS KIT ONLY; VARIABLE CAM SPROCKET NOTINCLUDED; KIT INCLUDES (2) CHAINS,(2) TENSIONERS,(3)GUIDES, (1) BALANCE SHAFT GUIDE,(1) CAM SPROCKET,(1)CRANK SPROCKET, (1) BALANCE SHAFT SPROCKET, (1) SEALKIT FRONTIER, 2008-11 ROGUE, 2005-06 XTRAIL

3-4212SA 2007-2011 SOLD AS KIT ONLY; VARIABLE CAM SPROCKET NOTINCLUDED; KIT INCLUDES (2) CHAINS,(2) TENSIONERS,(3)GUIDES, (1) BALANCE SHAFT GUIDE,(1) CAM SPROCKET,(1)CRANK SPROCKET, (1) BALANCE SHAFT SPROCKET, (1) SEALKIT ALTIMA,SENTRA

35 2.6L (2565CC) L26 OHC ENG - 1974-75 - 6 Cyl. - 83.0 MM Bore (260)Timing Kit 3DR110-2 KIT INCLUDES [3DR110], [S462], [S463], [BT08], [BD27] & [BD28]Chain 3DR110 110 LINKSCam Sprocket S462 40 TEETHCrank Sprocket S463 20 TEETHChain Tensioner BT08Damper BD27 1974-1975 UPPER

182


36 2.8L (2753CC) L28E,L28ET OHC ENG - 1975-83 - 6 Cyl. - 86.0 MM Bore (1975-78 280Z L28E)(1979-80 280ZX L28E) (1981-83 280ZX L28ET)Timing Kit 3DR110-3 KIT INCLUDES [3DR110], [S462], [S463], [BT08], [BD27] & [BD29]Chain 3DR110 110 LINKSCam Sprocket S462 40 TEETHCrank Sprocket S463 20 TEETHChain Tensioner BT08Damper BD27 1975-1983 UPPER

37 2.8L (2793CC) LD28 DIESEL SOHC ENG - 1981-83 - 6 Cyl. - 83.0 MM Bore (810, MAXIMA)Chain 3DR112D 112 LINKS CAMSHAFTBelt B-086 69 TEETH INJ. PUMPCam Sprocket S462 40 TEETHCrank Sprocket S463 20 TEETHChain Tensioner BT08 CAMSHAFTDamper BD27 1981-1983 UPPER

BD98 1981-1983 LOWER38 3.0L (2960CC) VG30,VG30I,VG30T SOHC ENG - 1984-89 - 6 Cyl. - 87.0, 87.1 MM Bore (1984-89

300ZX VG30 & VG30T 87.1 BORE) (1986-89 D21 TRUCK VG30 87.1 BORE) (1987-89 PATHFINDERVG30I 87.0 BORE)Belt B-0104 133 TEETHBelt Tensioner BT120

39 3.0L (2960CC) VG30DE,VG30DETT DOHC ENG - 1990-96 - V6 - 87.1 MM Bore (300ZX)Belt B-0180 1990-1993 228 TEETH

B-0251 1994-1996 228 TEETHBelt Tensioner BT260 RIGHT HANDIdler BT5243 RIGHT HAND

BT5244 UPPERBT5283 LEFT HAND

40 3.0L (2960CC) VG30E SOHC ENG - 1985-98 - V6 - 87 MM Bore (1985-94 MAXIMA) (1987-88 200SX)(1990-95 D21 TRUCK) (1990-95 PATHFINDER) (1993-98 QUEST)Belt B-0104 1985-1993 133 TEETH


41 3.0L (2988CC) VQ30DE DOHC ENG - 1995-01 - V6 - 93 MM Bore (MAXIMA)Timing Kit 3-4207S FROM 01/96 TO 2001 KIT INCLUDES [4207C], (2) [4208C], (2)

[S884], (2) [S886], (2) [S888], [S885], [BG5438], [BG5439],[BG5440], [BT5436], [BT5437], [BT5441], [BT5442] (INCLUDESSPROCKETS)

3-4207SX FROM 01/96 TO 2001 KIT INCLUDES [4207C], (2) [4208C],BG5438], [BG5439], [BG5440], [BT5436], [BT5437], [BT5441],[BT5442] (DOES NOT INCLUDES SPROCKETS)

Chain 4207C 138 LINKS LOWER4208C 44 LINKS UPPER; 2 REQ.

Cam Sprocket S884 42 TEETH INTAKE & EXHAUST; OUTER; 2 REQ.S886 42 TEETH EXHAUST; INNER; 2 REQ.S888 42 TEETH INTAKE; INNER; 2 REQ.

Crank Sprocket S885 21 TEETHChain Tensioner BT5436 HYD TENSIONER; LOWER RIGHT HAND

BT5437 FROM 01/96 TO 2001 TENSIONER ARMBT5441 TENSIONER; UPPER LEFT HANDBT5442 TENSIONER; UPPER RIGHT HAND

Chain Guide BG5438 UPPERContinued on Next Page

183


41 3.0L (2988CC) VQ30DE DOHC ENG - 1995-01 - V6 - 93 MM Bore (MAXIMA) (Continued)Chain Guide BG5439 LEFT LOWER

BG5440 LEFT UPPER42 3.3L (3275CC) VG33ER SOHC ENG - 2001-04 - V6 - 91.5 MM Bore (FRONTIER 2001-04) (XTERRA

2002-04) SUPER CHARGEDBelt Tensioner BT120

43 3.3L (3275CC) VG33E SOHC ENG - 1996-04 - V6 - 91.5 MM Bore (FRONTIER 1999-04)(PATHFINDER 1996-00) (QUEST 1999-02) (XTERRA 2000-04)Belt B-0249 133 TEETHBelt Tensioner BT120

44 4.0L (3954CC) VQ40DE DOHC ENG - 2005-14 - V6 - 95.5 MM Bore(FRONTIER,PATHFINDER,XTERRA,NV1500,2500,3500) 24VTiming Kit 3-0719S 2005-2012 KIT INCLUDES [719], (2) [721], (2) [S1232], [S1221],

[BT6000], [BT6001], [BT6002], [BD6005], [BG6003], [BG6004]NOTE: CONTAINS (2) EXHAUST CAM SPROCKETS ONLY

Chain 719 2005-2012 210 LINKS PRIMARY; W/INVERTED ROLLERS721 2005-2012 33 LINKS SECONDARY; 2 REQ.; W/INVERTED

ROLLERSCam Sprocket S1232 2005-2012 36 TEETH SECONDARY CHAIN; 2 REQ.; EXHAUSTCrank Sprocket S1221 2005-2012 26 TEETHChain Tensioner BD6005 2005-2012 PRIMARY TENSIONER ARM

BT6000 2005-2012 PRIMARY TENSIONERBT6001 2005-2012 SECONDARY; RIGHT HANDBT6002 2005-2012 SECONDARY; LEFT HAND

Chain Guide BG6003 2005-2012 TENSION SIDE; UPPERBG6004 2005-2012 TENSION SIDE; LOWER

45 5.6L (5552CC) VK56DE DOHC ENG - 2004-13 - V8 - 98 MM Bore(ARMADA,TITAN,PATHFINDER,NV2500,NV3500) GAS/FLEXTiming Kit 3-0460S 2004-2007 SOLD AS KIT ONLY; THIS KIT CONTAINS NO

SPROCKETS; KIT INCLUDES (2) CHAINS,(2) TENSIONERS,(4)GUIDES ARMADA,PATHFINDER,TITAN

NISSAN INDUSTRIALEngine Year Line Engine Year Line Engine Year Line

4 Cyl.H20 (OHV) 1966-70 1LineNo. Part Title Part No Description

1 H20 (OHV) ENG - 1966-70 - 4 Cyl. - 87.2 MM Bore (FORK LIFT)Chain 3DR54 54 LINKSCam Sprocket S598 40 TEETHCrank Sprocket S591 20 TEETHChain Tensioner BT103

184

OLDSMOBILEEngine Year Line Engine Year Line Engine Year Line

4 Cyl.1.8-0 (112) OHC 1982-86 12.0-1 (121) OHV 1987-88 22.0-B (122) OHV 1983-84 32.0-P (122) OHV 1983-86 42.0-K (122) OHC 1987-88 52.2-4 (134) OHV 1993-96 62.2-F (134) DOHC 2002-04 72.3-3 (138) SOHC 1992-94 82.3-A (138) DOHC 1989-94 92.3-D (138) DOHC 1987-95 10140 1976-77 112.4-T (146) DOHC 1996-01 12151-1 1978-79 13151-V 1978-80 142.5-5 (151) 1980-83 152.5-R (151) 1982-92 162.5-U (151) 1985-91 176 Cyl.2.8-7 (173) 1980 182.8-W (173) 1985-89 192.8-X (173) 1981-86 202.8-Z (173) 1982-84 213.0-E (181) 1982-85 223.0-L (181) 1985-88 233.1-T (189) OHV 1989-93 243.1-D (189) 1990-94 253.1-M (189) OHV 1993-99 26

6 Cyl. (Continued)

3.1-J (189) 1999 273.3-N (204) 1989-93 283.4-E (207) 1996-04 293.4-X (207) DOHC 1991-96 308 Cyl.215 1961-63 316 Cyl.225 1964-65 32231-2 1979 33231-3 1984-85 34231-A 1977-87 35231-C 1975-77 363.8-1 (231) 1992-99 373.8-3 (231) 1986-88 383.8-B (231) 1986 393.8-C (231) 1988-91 403.8-K (231) 1995-99 413.8-L (231) 1991-95 428 Cyl.4.0-C (244) DOHC 2001-03 434.0-C (244) DOHC 1995-99 446 Cyl.250 1966-76 454.1-4 (252) 1981-84 464.2-S (256) DOHC 2002-04 478 Cyl.260-F & 8 1975-82 48

8 Cyl. (Continued)

260-P DIESEL 1979 496 Cyl.4.3-W (262) 1996-01 504.3-W (262) 1992-94 514.3-Z (262) 1991-92 528 Cyl.267 1981-82 53301-Y 1979 54303 1949-53 555.0 (305) 1982-87 565.0 (305) 1977-80 575.0-E (305) 1991-92 585.0-Y,9 (307) 1980-90 59324 1954-56 60330 1964-67 61350-H,J 1973-76 62350-H,K & R 1968-80 63350-G & L 1977-79 645.7 (350N) 1978-85 655.7-7 (350) 1992 66371 1957-60 67394 1959-64 68400 1965-69 69400 1975 70403 1977-79 71425 1965-67 72455 1968-76 73


1 1.8-0 (112) OHC ENG - 1982-86 - 4 Cyl. - 3.346 Bore (PONTIAC T.B.I.) (BRAZILIAN ENG)Belt B-081 111 TEETH

2 2.0-1 (121) OHV ENG - 1987-88 - 4 Cyl. - 3.39 Bore (FIRENZA) (CHEVROLET ENG) (TBI)3pc Set 3-370S INCLUDES [395], [S558], [S549] & [MPC-393]Chain 395 58 LINKSCam Sprocket S558 40 TEETHCrank Sprocket S549 20 TEETHChain Tensioner BT5115

3 2.0-B (122) OHV ENG - 1983-84 - 4 Cyl. - 3.39 Bore (FIRENZA) (CHEVROLET ENG)3pc Set 3-370S INCLUDES [395], [S558], [S549] & [MPC-393]Chain 395 58 LINKSCam Sprocket S558 40 TEETHCrank Sprocket S549 20 TEETHChain Tensioner BT5115

4 2.0-P (122) OHV ENG - 1983-86 - 4 Cyl. - 3.39 Bore (FIRENZA)(CHEVROLET ENG) (TBI)3pc Set 3-370S INCLUDES [395], [S558], [S549] & [MPC-393]Chain 395 58 LINKSCam Sprocket S558 40 TEETHCrank Sprocket S549 20 TEETHChain Tensioner BT5115

5 2.0-K (122) OHC ENG - 1987-88 - 4 Cyl. - 3.386 Bore (E.F.I.) (BRAZILIAN ENG)Belt B-081 1987-1988 111 TEETH

6 2.2-4 (134) OHV ENG - 1993-96 - 4 Cyl. - 3.500 Bore3pc Set 3-370S 1993 INCLUDES [395], [S558], [S549] & [MPC-393]Continued on Next Page

185

OLDSMOBILE (Continued)LineNo. Part Title Part No Description

6 2.2-4 (134) OHV ENG - 1993-96 - 4 Cyl. - 3.500 Bore (Continued)3pc Set 3-370SA 1994-1996 INCLUDES [395], [S774], [S549] & [MPC-393]

3-395S 1994-1996 INCLUDES [370], [S774], [S549], [BT5115] & [MPC-393]RETRO FIT FINE FINISH CHAIN SET, CHECK FOR POSSIBLEOILING PROBLEM WHEN INSTALLING SET.

Chain 395 58 LINKSCam Thrust Plate Spacer MG221Cam Sprocket S558 1993 40 TEETH

S774 1994-1996 40 TEETHCrank Sprocket S549 20 TEETHChain Tensioner BT5115 FOR USE WITH BOTH [370] AND [395] CHAINS

7 2.2-F (134) DOHC ENG - 2002-04 - 4 Cyl. - 86.00 MM Bore (L61 ENG ECOTEC) (ALERO)Timing Kit 3-4201S KIT INCLUDES [4201F], (2) [S850], [S849], [BT5481], [BG5375],


3-4201SX KIT INCLUDES [4201F], [BT5481], [BG5375], [BG5381], [BG5382],[5467N] (DOES NOT INCLUDE SPROCKETS) TIMING CHAIN KIT



4202F 134 LINKS BALANCE SHAFT CHAINCam Sprocket S850 46 TEETH 2 REQUIRED; CAMSHAFT CHAIN SPROCKETCrank Sprocket S849 23 TEETH OUTER


S855 21 TEETH RIGHT HAND; EXHAUSTWater Pump Sprocket S911 40 TEETHChain Tensioner BT5383 BALANCE SHAFT CHAIN TENSIONER

BT5481 NEW DESIGN W/10.0mm DIA. PLUNGER; 82.0mm O.A.LCAMSHAFT CHAIN TENSIONER

Chain Guide BG5375 CAMSHAFT CHAIN GUIDE; RIGHT HANDBG5381 CAMSHAFT CHAIN GUIDE; LEFT HANDBG5382 CAMSHAFT CHAIN GUIDE; UPPERBG5384 BALANCE SHAFT CHAIN GUIDE; RIGHT HANDBG5385 BALANCE SHAFT CHAIN GUIDE; LEFT HANDBG5386 BALANCE SHAFT CHAIN GUIDE; UPPER

8 2.3-3 (138) SOHC ENG - 1992-94 - 4 Cyl. - 3.62 Bore ACHIEVA3pc Set 3-384S INCLUDES [384], [S734] & [S747]Chain 384 124 LINKS

384M 124 LINKS FINE FINISHCam Sprocket S734 38 TEETHCrank Sprocket S747 19 TEETHChain Guide BG305 1992-1994 LEFT HAND

BG307 1992-1994 RIGHT HAND9 2.3-A (140) DOHC ENG - 1989-94 - 4 Cyl. - 3.62 Bore

Timing Kit 3-383SB KIT INCLUDES [383], (2) [S734], [S747], [BG304], [BG305] &[BG306] INCLUDES GUIDES

3pc Set 3-383S 1992-1994 INCLUDES [383], (2) [S734] & [S747] 2ND DES.; DOESNOT INCLUDE GUIDES

3-3DR130 1989-1991 INCLUDES [3DR130], (2) [S692] & [S653] 1ST DES.;DOES NOT INCLUDE GUIDES

Chain 383 1989-1994 130 LINKS STANDARD FINISH CHAIN 2ND DES.Continued on Next Page

186


9 2.3-A (140) DOHC ENG - 1989-94 - 4 Cyl. - 3.62 Bore (Continued)Chain 383M 130 LINKS FINE FINISH CHAIN

3DR130 1989-1991 130 LINKS 1ST DES.Cam Sprocket S692 1989-1991 38 TEETH 1ST DES.; (2) REQ.

S734 1989-1994 38 TEETH 2ND DES.; (2) REQ.Crank Sprocket S653 1989-1991 19 TEETH 1ST DES.

S747 1989-1994 19 TEETH 2ND DES.Chain Tensioner BT188 1989-1991 1ST DES.Chain Guide BG304 2ND DES.; RIGHT HAND; 23MM WIDE

BG305 2ND DES.; LEFT HAND; 23MM WIDEBG306 2ND DES.; UPPER; 23MM WIDE

10 2.3-D (138) DOHC ENG - 1987-95 - 4 Cyl. - 3.62 BoreTiming Kit 3-383SB KIT INCLUDES [383], (2) [S734], [S747], [BG304], [BG305] &


3pc Set 3-383S 1992-1995 INCLUDES [383], (2) [S734] & [S747] 2ND DES.3-3DR130 1987-1991 INCLUDES [3DR130], (2) [S692] & [S653] 1ST DES.

Chain 383 1987-1995 130 LINKS STANDARD FINISH CHAIN 2ND DES.383M 1988-1995 130 LINKS FINE FINISH CHAIN3DR130 1987-1991 130 LINKS 1ST DES.

Cam Sprocket S692 1987-1991 38 TEETH 1ST DES. (2) REQ.S734 1987-1995 38 TEETH 2ND DES. (2) REQ.

Crank Sprocket S653 1987-1991 19 TEETH 1ST DES.S747 1987-1995 19 TEETH 2ND DES.

Chain Tensioner BT188 1987-1991 1ST DES.Chain Guide BG304 1987-1995 2ND DES. 23MM WIDE- RIGHT HAND

BG305 1987-1995 2ND DES. 23MM WIDE- LEFT HANDBG306 1987-1995 2ND DES. 23MM WIDE- UPPER

11 140 ENG - 1976-77 - 4 Cyl. - 3 1/2 BoreBelt B-012 91 TEETHCam Sprocket S426 36 TEETH

12 2.4-T (146) DOHC ENG - 1996-01 - 4 Cyl. - 3.54 BoreTiming Kit 3-390SA 1997-2001 KIT INCLUDES [390], (2) [S804T], [S805], [BT355],

[BT356], [BG365], [BG366], [BG367]3pc Set 3-390S INCLUDES [390], (2) [S804T], [S805]Chain 390 130 LINKSCam Sprocket S804T 1996-2001 38 TEETH 2 REQUIREDCrank Sprocket S805 19 TEETHChain Tensioner BT355 1997-2001 TENSIONER ARM

BT356 1997-2001 HYDRAULIC (2ND DESIGN)Chain Guide BG365 1996-2001 RIGHT HAND

BG366 1996-2001 LEFT HANDBG367 1996-2001 UPPERBG368 1996-1997 BAL SHAFT

13 151-1 ENG - 1978-79 - 4 Cyl. - 4.000 Bore (PONTIAC)Gear Set 2538S ALUM. INCLUDES [2524] & [2537]



187


14 151-V ENG - 1978-80 - 4 Cyl. - 4.000 Bore (PONTIAC)Gear Set 2538S ALUM. INCLUDES [2524] & [2537]



15 2.5-5 (151) ENG - 1980-83 - 4 Cyl. - 4.000 Bore (PONTIAC)Gear Set 2538S ALUM. INCLUDES [2524] & [2537]



16 2.5-R (151) ENG - 1982-92 - 4 Cyl. - 4.000 Bore (PONTIAC)3pc Set 3-378SA 1991-1992 INCLUDES [378], [S690] & [S713]Chain 378 1991-1992 56 LINKSGear Set 2538S 1982-1986 ALUM. INCLUDES [2524] & [2537]



17 2.5-U (151) ENG - 1985-91 - 4 Cyl. - 4.000 Bore3pc Set 3-378S 1990-1991 INCLUDES [378], [S690] & [S695]Chain 378 1990-1991 56 LINKSGear Set 2544S 1985-1989 INCLUDES [2544] & [2537]Cam Gear 2544 1985-1989 54 TEETHCrank Gear 2537 1985-1989 27 TEETHCam Sprocket S690 1990-1991 42 TEETHCrank Sprocket S695 1990-1991 21 TEETHChain Tensioner BT143 1990-1991

18 2.8-7 (173) ENG - 1980 - V6 - 89 MM Bore (CHEVROLET)3pc Set 3-373S INCLUDES [373], [S506] & [S511]Chain 373 64 LINKSCam Sprocket S506 40 TEETHCrank Sprocket S511 20 TEETHDamper BD59

19 2.8-W (173) ENG - 1985-89 - V6 - 3.50 Bore (CHEVROLET)3pc Set 3-372S 1985-1987 INCLUDES [385], [S620] & [S619] FIRENZA

3-372S 1987-1989 INCLUDES [385], [S620] & [S619] CUTLASS CIERA3-373S 1986 INCLUDES [373], [S506] & [S511] CUTLASS CIERA

Chain 373 1986 64 LINKS CUTLASS CIERA385 1985-1987 64 LINKS FIRENZA385 1987-1989 64 LINKS CUTLASS CIERA

Cam Sprocket S506 1986 40 TEETH CUTLASS CIERAS620 1985-1987 40 TEETH FIRENZAS620 1987-1989 40 TEETH CUTLASS CIERA

Crank Sprocket S511 1986 20 TEETH CUTLASS CIERAS619 1985-1987 20 TEETH FIRENZA


188


19 2.8-W (173) ENG - 1985-89 - V6 - 3.50 Bore (CHEVROLET) (Continued)Crank Sprocket S619 1987-1989 20 TEETH CUTLASS CIERADamper BD131 1985-1986 FIRENZA

BD131 1987-1989BD59 1986 CUTLASS CIERA

20 2.8-X (173) ENG - 1981-86 - V6 - 89 MM Bore (CHEVROLET)3pc Set 3-373S INCLUDES [373], [S506] & [S511]Chain 373 64 LINKSCam Sprocket S506 40 TEETHCrank Sprocket S511 20 TEETHDamper BD59

21 2.8-Z (173) ENG - 1982-84 - V6 - 89 MM Bore (CHEVROLET)3pc Set 3-373S INCLUDES [373], [S506] & [S511]Chain 373 64 LINKSCam Sprocket S506 40 TEETHCrank Sprocket S511 20 TEETHDamper BD59

22 3.0-E (181) ENG - 1982-85 - V6 - 3.800 Bore (W/2BC) (BUICK)3pc Set 3-359SB INCLUDES [359], [S610] & [S323]Chain 359 54 LINKSCam Button CB100 W/SPRINGCam Sprocket S610 40 TEETHCrank Sprocket S323 20 TEETHDamper BD44 RIGHT HAND

BD45 LEFT HAND23 3.0-L (181) ENG - 1985-88 - V6 - 3.800 Bore (W/MULTI PORT INJ.)

3pc Set 3-359SC 1985 INCLUDES [359], [S610] & [S621] 2ND DES.3-359SC 1986-1988 INCLUDES [359], [S610] & [S621]

Chain 359 54 LINKSCam Button CB100 W/SPRINGCam Sprocket S610 40 TEETHCrank Sprocket S609 1985 20 TEETH 1ST DES. SPLINED DRIVE W/32MM THICK



Damper BD58 1985-1988 W/SPRING24 3.1-T (189) OHV ENG - 1989-93 - V6 - 3.503 Bore (CAR)

3pc Set 3-372S INCLUDES [385], [S620] & [S619]Chain 385 64 LINKSCam Sprocket S620 40 TEETHCrank Sprocket S619 20 TEETHDamper BD131

25 3.1-D (189) ENG - 1990-94 - V6 - 3.503 Bore (SILHOUETTE VAN)3pc Set 3-372S INCLUDES [385], [S620] & [S619]Chain 385 64 LINKSCam Sprocket S620 40 TEETHCrank Sprocket S619 20 TEETHDamper BD131 1990-1993




189


26 3.1-M (189) OHV ENG - 1993-99 - V6 - 3.50 Bore (Continued)3pc Set 3-385S 1993-1998 INCLUDES [385], [S756] & [S619]

3-385S 1999 INCLUDES [385], [S756] & [S619] 1ST DES. W/64 LINKCHAIN, 40 TOOTH CAM SPROCKET & 20 TOOTH CRANKSPROCKET


Cam Sprocket S756 1993-1998 40 TEETHS756 1999 40 TEETH 1ST DES.S848 1999 50 TEETH 2ND DES.


Damper BD336 1ST DES.BD600 1999 2ND DES.

27 3.1-J (189) ENG - 1999-99 - V6 - 3.500 Bore (CALIFORNIA EMISSIONS ONLY)Timing Kit 3-385SC KIT INCLUDES [385], [S619], [S756], [BD336] CALIFORNIA

EMISSIONS ONLY3pc Set 3-385S INCLUDES [385], [S756] & [S619] CALIFORNIA EMISSIONS ONLYChain 385 64 LINKS CALIFORNIA EMISSIONS ONLYCam Sprocket S756 40 TEETH CALIFORNIA EMISSIONS ONLYCrank Sprocket S619 20 TEETH CALIFORNIA EMISSIONS ONLYDamper BD336 1ST DES.; CALIFORNIA EMISSIONS ONLY

28 3.3-N (204) ENG - 1989-93 - V6 - 3.700 Bore3pc Set 3-377S 1989-1990 INCLUDES [377], [S684] & [S691]

3-377SA 1991-1993 INCLUDES [377], [S726] & [S621]Chain 377 54 LINKSCam Button CB300 1989-1990Cam Sprocket S726 1991-1993 40 TEETHCrank Sprocket S621 20 TEETHDamper BD295 1989-1992 2ND DES. W/COUNTER- BORED DAMPER BOLT

HOLEBD295 1993BD58 1989-1992 1ST DES. W/CHAMFERED DAMPER BOLT HOLE

29 3.4-E (207) ENG - 1996-04 - V6 - 3.62 Bore (SILHOUETTE, ALERO)Timing Kit 3-385SC 1996-1999 KIT INCLUDES [385], [S619], [S756], [BD336]





S847 2000-2004 25 TEETHDamper BD336 1996-1999

BD600 2000-200430 3.4-X (207) DOHC ENG - 1991-96 - V6 - 3.62 Bore

3pc Set 3-382S INCLUDES [382], [S719] & [S758]Chain 382 64 LINKS CRANKSHAFT TO INTERMEDIATE SHAFTBelt B-0192 1991-1995 169 TEETH INTERMEDIATE SHAFT TO CAMSHAFTS

B-0273 1996 200 TEETH INTERMEDIATE SHAFT TO CAMSHAFTSCrank Sprocket S719 20 TEETHContinued on Next Page

190


30 3.4-X (207) DOHC ENG - 1991-96 - V6 - 3.62 Bore (Continued)Intermediate Sprocket S758 40 TEETH CHAIN DRIVEBelt Tensioner BT308 CHAIN DRIVE

31 215 ENG - 1961-63 - 8 Cyl. - 3 1/2 Bore (BUICK)3pc Set 3-359S INCLUDES [359], [S334] & [S323]Chain 359 54 LINKSCam Sprocket S334 40 TEETHCrank Sprocket S323 20 TEETH

32 225 ENG - 1964-65 - V6 - 3 3/4 Bore (BUICK)3pc Set 3-359S INCLUDES [359], [S334] & [S323]Chain 359 54 LINKSCam Sprocket S334 40 TEETHCrank Sprocket S323 20 TEETHDamper BD44 1964-1965 RIGHT HAND W/SPRING

BD45 1964-1965 LEFT HAND33 231-2 ENG - 1979 - V6 - 3.78 Bore (CUTLASS VISTA

CRUISER,CALAIS,SALON,SUPREME,SUPREME BROGHAM)(BUICK ENG)Chain 359 54 LINKSCam Button CB100 W/SPRINGCrank Sprocket S323 20 TEETHDamper BD44 RIGHT HAND W/SPRING

BD45 LEFT HAND34 231-3 ENG - 1984-85 - V6 - 3.800 Bore (BUICK)

3pc Set 3-359SB 1985 INCLUDES [359], [S610] & [S323]Chain 359 54 LINKSCam Sprocket S610 1985 40 TEETHCrank Sprocket S323 20 TEETHDamper BD44 1984-1985 RIGHT HAND W/SPRING

35 231-A ENG - 1977-87 - V6 - 3.800 Bore (BUICK)3pc Set 3-359SB INCLUDES [359], [S610] & [S323]Chain 359 54 LINKSCam Button CB100 W/SPRINGCam Sprocket S610 40 TEETHCrank Sprocket S323 20 TEETHDamper BD44 1977-1987 RIGHT HAND W/SPRING

BD45 1977-1981 LEFT HAND36 231-C ENG - 1975-77 - V6 - 3.78 Bore (BUICK-ODD FIRE)

3pc Set 3-359S INCLUDES [359], [S334] & [S323] NON-INTEGRAL DIST. DRIVEGEAR

Chain 359 54 LINKSCam Button CB100 W/SPRINGCam Sprocket S334 40 TEETHCrank Sprocket S323 20 TEETHDamper BD44 RIGHT HAND; W/SPRING

BD45 LEFT HAND37 3.8-1 (231) ENG - 1992-99 - V6 - 3.800 Bore

3pc Set 3-375SA 1992-1994 INCLUDES [375], [S716] & [S729]3-381AS 1995 INCLUDES [381A], [S810], [S811]3-381ASB 1996-1999 INCLUDES [381A], [S811] & [S812]

Chain 375 1992-1994 54 LINKS381A 1995-1999 64 LINKS

Cam Sprocket S716 1992-1994 40 TEETHS810 1995 48 TEETH


191


37 3.8-1 (231) ENG - 1992-99 - V6 - 3.800 Bore (Continued)Cam Sprocket S812 1996-2000 48 TEETHCrank Sprocket S729 1992-1994 20 TEETH

S811 1995-1999 24 TEETHDamper BD295 1992 2ND DES. W/COUNTER- BORED DAMPER BOLT HOLE

BD295 1993-1994BD344 1995-1999BD58 1992 1ST DES. W/CHAMFERED DAMPER BOLT HOLE

38 3.8-3 (231) ENG - 1986-88 - V6 - 3.800 Bore3pc Set 3-359SC INCLUDES [359], [S610] & [S621]Chain 359 54 LINKSCam Button CB100 W/SPRINGCam Sprocket S610 40 TEETHCrank Sprocket S621 20 TEETHDamper BD58 W/SPRING

39 3.8-B (231) ENG - 1986 - V6 - 3.800 Bore3pc Set 3-359SC INCLUDES [359], [S610] & [S621]Chain 359 54 LINKSCam Button CB100 W/SPRINGCam Sprocket S610 40 TEETHCrank Sprocket S621 20 TEETHDamper BD58 W/SPRING


3-375SA 1991 INCLUDES [375], [S716] & [S729]Chain 375 54 LINKSCam Button CB300 1988-1990Cam Sprocket S716 1991 40 TEETH

S718 1988-1990 40 TEETHCrank Sprocket S729 20 TEETHDamper BD295 1988-1991 2ND DES. W/COUNTER- BORED DAMPER BOLT

HOLEBD58 1988-1991 1ST DES. W/CHAMFERED DAMPER BOLT HOLE


42 3.8-L (231) ENG - 1991-95 - V6 - 3.800 Bore3pc Set 3-375SA 1991-1994 INCLUDES [375], [S716] & [S729]




S811 1995 24 TEETHDamper BD295 1991-1992 2ND DES. W/COUNTER- BORED DAMPER BOLT

HOLEBD295 1993-1994BD344 1995BD58 1991-1992 1ST DES. W/CHAMFERED DAMPER BOLT HOLE

192


43 4.0-C (244) DOHC ENG - 2001-03 - 8 Cyl. - 3.43 Bore AURORATiming Kit 3-8MMSRH62S KIT INCLUDES: (2) [8MMSRH126], [8MMSRH62], [BD311],

[BD312],(2) [BT313], [BT314], [BG309],(2) [BG310] (NOTE: THISKIT DOES NOT CONTAIN SPROCKETS)


Cam Sprocket S768 40 TEETH RIGHT HANDS780 40 TEETH 2 REQ.; LEFT HAND

Intermediate Sprocket S772 28/42 TEETH 28 & 42 TEETHChain Tensioner BT314 LOWERDamper BD311 LEFT HAND

BD312 RIGHT HAND44 4.0-C (244) DOHC ENG - 1995-99 - 8 Cyl. - 3.43 Bore AURORA (1995-99)

Timing Kit 3-8MMSRH62S KIT INCLUDES: (2) [8MMSRH126], [8MMSRH62], [BD311],[BD312],(2) [BT313], [BT314], [BG309],(2) [BG310] (NOTE: THISKIT DOES NOT CONTAIN SPROCKETS)

3-8MMSRH62SA 1995-1998 KIT INCLUDES: (2) [8MMSRH126], [8MMSRH62],[BD311], [BD312],(2) [BT313], [BT314], [BG309],(2) [BG310],[S768], [S770], [S772], (2) [S780], [S795] (NOTE: THIS KITCONTAINS SPROCKETS)


Cam Sprocket S768 1995-1998 40 TEETH INTAKE; RIGHT HANDS770 40 TEETH EXHAUST; RIGHT HANDS780 1995-1998 40 TEETH INTAKE & EXHAUST; LEFT HAND (2) REQ.

Crank Sprocket S795 40 TEETHIntermediate Sprocket S772 28/42 TEETH 28 & 42 TEETHChain Tensioner BT313 UPPER (2) REQ.

BT314 LOWERDamper BD311 LEFT HAND

BD312 RIGHT HANDChain Guide BG309 LOWER LEFT

BG310 UPPER (2) REQ.45 250 ENG - 1966-76 - 6 Cyl. - 3 7/8 Bore (CHEVROLET)

Gear Set 2525S 1966-1975 INCLUDES [2524] & [2501] W/INT. MANIFOLD & CYL.HEAD CAST SEPARATE

2538S 1975 ALUM. INCLUDES [2524] & [2537] W/INTAKE MANIFOLDCAST AS INTEGRAL PART OF CYL. HEAD

2538S 1976 ALUM. INCLUDES [2524] & [2537] W/#71 STAMPED ONOEM GEAR HUB

2540S 1976 INCLUDES [2526] & [2541] W/#20 STAMPED ON OEMCRANK GEAR HUB

Cam Gear 2524 1966-1975 54 TEETH ALUMINUM2524 1976 54 TEETH ALUMINUM W/#14 STAMPED ON OEM GEAR

HUB2526 1976 54 TEETH W/#20 STAMPED ON OEM CRANK GEAR HUB

Crank Gear 2501 1966-1975 27 TEETH W/INT. MANIFOLD & CYL. HEAD CASTSEPARATE

2537 1975 27 TEETH W/INTAKE MANIFOLD CAST AS INTEGRALPART OF CYL. HEAD

2537 1976 27 TEETH W/#71 STAMPED ON OEM GEAR HUBCam Thrust Plate Spacer MG221

193


46 4.1-4 (252) ENG - 1981-84 - V6 - 3.965 Bore (BUICK)3pc Set 3-359SB INCLUDES [359], [S610] & [S323]Chain 359 54 LINKSCam Button CB100 W/SPRINGCam Sprocket S610 40 TEETHCrank Sprocket S323 20 TEETHDamper BD44 W/SPRING

BD45 LEFT HAND47 4.2-S (256) DOHC ENG - 2002-04 - 6 Cyl. - 3.66 Bore (BRAVADA)

Timing Kit 3-195S INCLUDES [195], [S908A], [S913], [BT5512], [BG5504], [BG5506],[BG6006]

Chain 195 168 LINKSCam Sprocket S908A 58 TEETHCrank Sprocket S913 29 TEETHChain Tensioner BT5512Chain Guide BG5504 RIGHT HAND


48 260-F & 8 ENG - 1975-82 - 8 Cyl. - 3.500 Bore3pc Set 3-498SC INCLUDES [498], [S348] & [S349]Chain 498 48 LINKSCam Sprocket S348 36 TEETHCrank Sprocket S349 18 TEETH

49 260-P DIESEL ENG - 1979 - 8 Cyl. - 3 1/2 BoreChain 180 48 LINKSCrank Sprocket S503 18 TEETH

50 4.3-W (262) ENG - 1996-01 - V6 - 4.00 Bore (BRAVADA)3pc Set 3-509S 1996-1998 INCLUDES [499], [S776] & [S505] W/BALANCE SHAFT

3-8MMSRH72S 1999-2001 INCLUDES [8MMSRH72], [S835], [S836] USE [BT5452]AND GM COVER #89017259 WITH THIS SET TO ELIMINATERATTLE.

Chain 8MMSRH72 1999-2001 72 LINKSCam Sprocket S776 1996-1998 36 TEETH W/BALANCE SHAFT

S836 1999-2001 56 TEETHCrank Sprocket S505 1996-1998 18 TEETH W/BALANCE SHAFT

S835 1999-2001 28 TEETHChain Tensioner BT5452 1999-2001 FOR USE WITH [3-8MMSRH72S] TO ELIMINATE

RATTLE. USE WITH GM COVER #8901725951 4.3-W (262) ENG - 1992-94 - V6 - 4.000 Bore (BRAVADA)

3pc Set 3-509S INCLUDES [499], [S776] & [S505] W/BALANCE SHAFT3-509S 1992-1993 INCLUDES [499], [S776] & [S505] WITHOUT BALANCE

SHAFTChain 499 46 LINKS W/BALANCE SHAFT

499 1992-1993 46 LINKS WITHOUT BALANCE SHAFTCam Sprocket S776 36 TEETH W/BALANCE SHAFT

S776 1992-1993 36 TEETH WITHOUT BALANCE SHAFTCrank Sprocket S505 18 TEETH W/BALANCE SHAFT

S505 1992-1993 18 TEETH WITHOUT BALANCE SHAFT52 4.3-Z (262) ENG - 1991-92 - V6 - 4.000 Bore (BRAVADA)


194


53 267 ENG - 1981-82 - 8 Cyl. - 3.500 Bore (CHEVROLET) (CANADIAN EXPORT)3pc Set 3-163S INCLUDES [163], [S288] & [S289] HEAVY DUTY




S391 18 TEETH STANDARD DUTY54 301-Y ENG - 1979 - 8 Cyl. - 4.000 Bore (PONTIAC)


55 303 ENG - 1949-53 - 8 Cyl. - 3 3/4 BoreChain 373 64 LINKS

56 5.0 (305) ENG - 1982-87 - 8 Cyl. - 3.74 Bore (CHEVROLET ENG.)3pc Set 3-163S INCLUDES [163], [S288] & [S289] HEAVY DUTY




S391 18 TEETH STANDARD DUTY57 5.0 (305) ENG - 1977-80 - 8 Cyl. - 3.74 Bore (CHEVROLET ENG.)

3pc Set 3-163S INCLUDES [163], [S288] & [S289] HEAVY DUTY3-499S 1977-1980 INCLUDES [499], [S390] & [S391] STANDARD DUTY




58 5.0-E (305) ENG - 1991-92 - 8 Cyl. - 3.736 Bore3pc Set 3-506SC INCLUDES [499], [S732] & [S391]Chain 499 46 LINKSCam Sprocket S732 36 TEETHCrank Sprocket S391 18 TEETH

59 5.0-Y,9 (307) ENG - 1980-90 - 8 Cyl. - 3.800 Bore (1983-87 5.0-9) (1980-90 5.0-Y)3pc Set 3-498SC INCLUDES [498], [S348] & [S349]Chain 498 48 LINKSCam Sprocket S348 36 TEETHCrank Sprocket S349 18 TEETH


61 330 ENG - 1964-67 - 8 Cyl. - 3 15/16 Bore3pc Set 3-498SC INCLUDES [498], [S348] & [S349]Chain 498 48 LINKSCam Sprocket S348 36 TEETHCrank Sprocket S349 18 TEETH

195


62 350-H,J ENG - 1973-76 - 8 Cyl. - 3.88 Bore (OMEGA ONLY) (NOT PRODUCED IN 1974)3pc Set 3-359S INCLUDES [359], [S334] & [S323]Chain 359 54 LINKSCam Sprocket S334 40 TEETHCrank Sprocket S323 20 TEETH

63 350-H,K & R ENG - 1968-80 - 8 Cyl. - 4.06 Bore (350-H 1972-73) (350-K 1972-75) EXC. OMEGA(350-R 1967-71, 1976-80) (OLDSMOBILE ENG)3pc Set 3-498SC INCLUDES [498], [S348] & [S349]Chain 498 48 LINKSCam Sprocket S348 36 TEETHCrank Sprocket S349 18 TEETH

64 350-G & L ENG - 1977-79 - 8 Cyl. - 4.000 Bore3pc Set 3-163S INCLUDES [163], [S288] & [S289] HEAVY DUTY




S391 18 TEETH STANDARD DUTY65 5.7 (350N) ENG - 1978-85 - 8 Cyl. - 4.00 Bore (DIESEL)


66 5.7-7 (350) ENG - 1992 - 8 Cyl. - 4.06 Bore (CUSTOM CRUISER) (CHEVROLET ENG)3pc Set 3-506SC INCLUDES [499], [S732] & [S391]Chain 499 46 LINKSCam Sprocket S732 36 TEETHCrank Sprocket S391 18 TEETH

67 371 ENG - 1957-60 - 8 Cyl. - 4.000 BoreChain 494 48 LINKSCam Sprocket S344 1959-1960 36 TEETHCrank Sprocket S246 1957-1958 18 TEETH

68 394 ENG - 1959-64 - 8 Cyl. - 4 1/8 BoreChain 494 48 LINKSCam Sprocket S344 36 TEETHCrank Sprocket S246 1961-1964 18 TEETH

69 400 ENG - 1965-69 - 8 Cyl. - 4.000 Bore3pc Set 3-494SD INCLUDES [494], [S360] & [S361]Chain 494 48 LINKSCam Sprocket S360 36 TEETHCrank Sprocket S361 18 TEETH

70 400 ENG - 1975 - 8 Cyl. - 4.12 Bore (PONTIAC)3pc Set 3-350S INCLUDES [350], [S305] & [S371]Chain 350 60 LINKS

71 403 ENG - 1977-79 - 8 Cyl. - 4.351 Bore3pc Set 3-498SC INCLUDES [498], [S348] & [S349]Chain 498 48 LINKSCam Sprocket S348 36 TEETHCrank Sprocket S349 18 TEETH

72 425 ENG - 1965-67 - 8 Cyl. - 4 1/8 Bore3pc Set 3-494SD INCLUDES [494], [S360] & [S361]Chain 494 48 LINKSContinued on Next Page

196


72 425 ENG - 1965-67 - 8 Cyl. - 4 1/8 Bore (Continued)Cam Sprocket S360 36 TEETHCrank Sprocket S361 18 TEETH

73 455 ENG - 1968-76 - 8 Cyl. - 4 1/8 Bore3pc Set 3-494SD 1968-1974 INCLUDES [494], [S360] & [S361]

3-498SC 1975-1976 INCLUDES [498], [S348] & [S349]Chain 494 1968-1974 48 LINKS



S361 1968-1974 18 TEETH

OLIVER TRACTOREngine Year Line Engine Year Line Engine Year Line

4 Cyl.129 1144 2

6 Cyl.216 3F226 CONT. 4231 5

6 Cyl. (Continued)

265 6


1 129 ENG - 4 Cyl. - 3 5/16 Bore (66HC & 66KD)Crank Gear 5401 30 TEETH

2 144 ENG - 4 Cyl. - 3 1/2 Bore (55HC, SUPER 55HC, SUPER 66HC & SUPER 66KD)Crank Gear 5401 30 TEETH

3 216 ENG - 6 Cyl. - 3 1/2 Bore (SUPER 66D, SUPER 77D, 770D, SUPER 77HC, SUPER 77KD SUPER88HC,88HC & 770)Crank Gear 5401 30 TEETH

4 F226 CONT. ENG - 6 Cyl. - 3 5/16 Bore (AG6)Crank Gear 2603 24 TEETHFan Drive Gear 2675 20 TEETH

5 231 ENG - 6 Cyl. - 3 1/2 Bore (88D, 88HC TO SER. 6502,999 & 1600 SER. 124420 TO 147568)Crank Gear 5401 30 TEETH

6 265 ENG - 6 Cyl. - 3 3/4 Bore (SUPER 88D, SUPER 88HC AFTER SER. 6503,000, 88KD, 880D,880HC AFTER SER. 60500,000 & 1650 AFTER SER. 147568)Crank Gear 5401 30 TEETH

OPELEngine Year Line Engine Year Line Engine Year Line

4 Cyl.1.5 (1492CC) OHC 1968 1LineNo. Part Title Part No Description

1 1.5 (1492CC) OHC ENG - 1968-68 - 4 Cyl. - 85 MM Bore (KADETT)Belt Tensioner BT10

197

PEUGEOTEngine Year Line Engine Year Line Engine Year Line

4 Cyl.1905CC SOHC 1989-91 12112CC OHV 1974-76 22155CC OHC 1987-90 3

4 Cyl. (Continued)

2304CC OHV 1977-84 42498CC OHV 1985-87 5

6 Cyl.2664CC OHC 1977-78 62839CC OHC 1979-80 72849CC OHC 1987-89 8


1 1905CC SOHC ENG - 1989-91 - 4 Cyl. - 83 MM Bore (405,405DL,405S)Belt B-0189 113 TEETH

2 2112CC OHV ENG - 1974-76 - 4 Cyl. - 90 MM Bore (504D DIESEL)Chain 3DR90 90 LINKS

3 2155CC OHC ENG - 1987-90 - 4 Cyl. - 88 MM Bore (505)Belt B-0111 116 TEETH

4 2304CC OHV ENG - 1977-84 - 4 Cyl. - 94 MM Bore (504,504D DIESEL) (604 TURBO DIESEL)Chain 3DR90 90 LINKS

5 2498CC OHV ENG - 1985-87 - 4 Cyl. - 94 MM Bore (505D TURBO DIESEL)Chain 3DR90 90 LINKS

6 2664CC OHC ENG - 1977-78 - V6 - 88 MM Bore (604)Chain 3SR44 44 LINKS OIL PUMP

3SR94 94 LINKS CAMSHAFT (2) REQ.7 2839CC OHC ENG - 1979-80 - V6 - 90.9 MM Bore (604)

Chain 3SR44 44 LINKS OIL PUMP3SR94 94 LINKS CAMSHAFT (2) REQ.

8 2849CC OHC ENG - 1987-89 - V6 - 91 MM Bore (505)Chain 3SR44 44 LINKS OIL PUMP

3SR94 94 LINKS CAMSHAFT (2) REQ.

PLYMOUTHEngine Year Line Engine Year Line Engine Year Line

4 Cyl.1.4 SOHC 1979-84 11.5 (1500) OHC 1971-73 21.5-A (Q1500) 1991-94 31.5-K,P,X (1468CC) 1985-90 41.6 (1597CC) DOHC 1989-90 51.6 (K1600) SOHC 1976-77 61.6 (K1600) SOHC 1983-88 71.6 (Z1600) SOHC 1978-82 81.7 (1700) SOHC 1978-83 91.8-C,D (1834CC) 1992-94 101.8-T (107) SOHC 1989-90 111.8-B,T (P1800) SOHC 1990-94 122.0 (A2000) SOHC 1984-91 132.0 (U2000) SOHC 1976-79 142.0 (122) DOHC 1990-94 152.0-C (122) SOHC 1995-01 162.0-Y (122) DOHC 1995-99 17

4 Cyl. (Continued)

2.2 (135) SOHC 1981-94 182.4-G (144) SOHC 1993-94 192.4-W (144) SOHC 1992 202.4-X ,B (148) DOHC 1996-00 212.5 (153) SOHC 1986-95 222.6 (2555) SOHC 1978-86 236 Cyl.170 1960-69 243.0-3 (181) SOHC 1987-00 25198 1970-74 263.3 (201) OHV 1990-00 273.5-F (215) SOHC 1997 283.5-G (215) SOHC 2000-01 293.7 (225) 1960-83 30230 1946-59 31230 1934-45 323.8-L (230) OHV 1994-99 33

8 Cyl.239 1955 34270 1956 35273 1965-69 365.2 (318) OHV 1958-89 37340 1968-73 38350 1958 395.9 (360) OHV 1971-80 40361 1959-66 41383 1960-71 42400 1972-78 43413 1962 44426 HEMI 1966-71 45426 WEDGE 1963-65 46440 1966-78 47


1 1.4 SOHC ENG - 1979-84 - 4 Cyl. - 74 MM Bore (CHAMP, COLT VIN CODE J,2,A)Belt B-073 92 TEETHBelt Tensioner BD33

2 1.5 (1500) OHC ENG - 1971-73 - 4 Cyl. - 86 MM Bore (CRICKET)Chain 3SR64 64 LINKS

198

PLYMOUTH (Continued)LineNo. Part Title Part No Description

3 1.5-A (Q1500) ENG - 1991-94 - 4 Cyl. - 75.5 MM Bore (1991-94 1.5-A OHC 12 VALVE G15B U.S.,4G15CANADA) (MITSUBISHI ENG'S)Belt B-0191 92 TEETH

4 1.5-K,P,X (1468CC) ENG - 1985-90 - 4 Cyl. - 75.5 MM Bore COLT(8V MITSUBISHI ENG)Belt B-0128 1987-1990 92 TEETH

B-073 1985-1986 92 TEETHCam Sprocket S670 1989-1990 40 TEETH VIN CODE X ONLYCrank Sprocket S633 1989-1990 20 TEETH VIN CODE X ONLYBelt Tensioner BD33

5 1.6 (1597CC) DOHC ENG - 1989-90 - 4 Cyl. - 76.9 MM Bore (COLT GT) (MITSUBISHI ENG)Belt B-0165 151 TEETHBelt Tensioner BT194 BELT IDLER

BT225 BELT TENSIONER6 1.6 (K1600) SOHC ENG - 1976-77 - 4 Cyl. - 76.9 MM Bore ARROW, COLT; W/O BALANCE SHAFT;

4G32 CANADA,G32B U.S.; MITSUBISHI ENGBelt Tensioner BT56Belt Guide BG53

7 1.6 (K1600) SOHC ENG - 1983-88 - 4 Cyl. - 76.9 Bore (COLT) (G32B U.S., 4G32 CANADA)(MITSUBISHI ENG'S)Belt B-093 120 TEETHOil Pump Sprocket S8003 24 TEETH 24 TEETHBelt Tensioner BD32 1983 To 12/86

BT160 From 1/87 TO 19888 1.6 (K1600) SOHC ENG - 1978-82 - 4 Cyl. - 76.9 MM Bore (W/BALANCE SHAFT) (G32B MITSUBISHI

ENG)Belt B-013 122 TEETH CAMSHAFT BELTCrank Sprocket S901 32 TEETH BALANCE SHAFTBelt Tensioner BD32 CAMSHAFT BELT TENSIONER

BD38 BALANCE SHAFT BELT TENSIONER9 1.7 (1700) SOHC ENG - 1978-83 - 4 Cyl. - 3.13 Bore

Belt B-017 121 TEETHCrank Sprocket S411 22 TEETHBelt Tensioner BT148

10 1.8-C,D (1834CC) ENG - 1992-94 - 4 Cyl. - 3.19 Bore (W/O BALANCE SHAFT-16 VALVE COLT) (4G93MITSUBISHI ENG)Belt B-0201 121 TEETH

11 1.8-T (107) SOHC ENG - 1989-90 - 4 Cyl. - 3.17 Bore (W/O BALANCE SHAFT) (COLT) (8 VALVE4G37 MITSUBISHI ENG)Belt B-093 120 TEETHBelt Tensioner BT160

12 1.8-B,T (107) SOHC ENG - 1990-94 - 4 Cyl. - 3.17 Bore (W/ BALANCE SHAFT) (LASER) (8 VALVE4G37 MITSUBISHI ENG)Belt B-0158 122 TEETH CAMSHAFT

B-090 55 TEETH BALANCE SHAFTBelt Tensioner BD38 BALANCE SHAFT

BT160 CAMSHAFT13 2.0 (A2000) SOHC ENG - 1984-91 - 4 Cyl. - 85 MM Bore (W/BALANCE SHAFT) (G63B MITSUBISHI

ENG)Belt B-0158 From 10/1/86 TO 1991 122 TEETH CAMSHAFT

B-089 1984 To 10/1/86 122 TEETH CAMSHAFTContinued on Next Page

199


13 2.0 (A2000) SOHC ENG - 1984-91 - 4 Cyl. - 85 MM Bore (W/BALANCE SHAFT) (G63B MITSUBISHIENG) (Continued)Belt B-090 1984 To 3/1/88 55 TEETH BAL. SHAFTBelt Tensioner BT105 CAMSHAFT

BT106 1984 To 5/87 BAL. SHAFTBT161 From 6/87 TO 1991 BAL. SHAFT

14 2.0 (U2000) SOHC ENG - 1976-79 - 4 Cyl. - 84 MM Bore (W/BALANCE SHAFT-ARROW,ARROWPICKUP,COLT) (G52B MITSUBISHI ENG)Timing Kit 3-102S 1978-1979 KIT INCLUDES [3DR102-2] CAMSHAFT KIT &

[8MMSR90-1] BALANCE SHAFT KIT3DR102-2 KIT INCLUDES [3DR102], [S458], [S455], [BD31], [BD30] & [BT49]

(CAMSHAFT KIT)8MMSR90-1 1978-1979 KIT INCLUDES [8MMSR90], [S407], [S567] (2), [BG48],

[BG64] & [BG51] (BALANCE SHAFT KIT)Balance Shaft Elim. Kit BSEK122 KIT INCLUDES CHAIN, OIL PUMP SHAFT PLUG, OIL GALLEY


Chain 3DR102 102 LINKS CAMSHAFT CHAIN8MMSR90 90 LINKS BALANCE SHAFT CHAIN


Balance Shaft Sprocket S567 17 TEETH (2) REQ.Chain Tensioner BT49 CAMSHAFT CHAIN TENSIONERChain Guide BD30 CAMSHAFT CHAIN GUIDE; TENSION SIDE

BD31 CAMSHAFT CHAIN GUIDE; SLACK SIDEBG48 BALANCE SHAFT CHAIN GUIDE; LOWER LEFTBG51 BALANCE SHAFT CHAIN GUIDE; LOWER RIGHTBG64 1978-1979 BALANCE SHAFT CHAIN GUIDE; UPPER

15 2.0 (122) DOHC ENG - 1990-94 - 4 Cyl. - 85 MM Bore (LASER RS) (VIN R 1990-92 NON-TURBO)(VIN U 1990-92 TURBO) (VIN E 1993-94 NON-TURBO) (VIN F 1993-94 TURBO)Belt B-0167 153 TEETH CAMSHAFT

B-0168 65 TEETH BAL. SHAFTBelt Tensioner BT194 CAMSHAFT

BT197 BAL. SHAFTBT225 LOWER HYDRAULIC ADJUSTER; EXC. VIN CODE F

16 2.0-C (122) SOHC ENG - 1995-01 - 4 Cyl. - 3.45 Bore (1996-00 BREEZE) (1995-01 NEON)Belt B-0245 112 TEETH

17 2.0-Y (122) DOHC ENG - 1995-99 - 4 Cyl. - 3.44 Bore (NEON)Belt B-0246 150 TEETH

18 2.2 (135) SOHC ENG - 1981-94 - 4 Cyl. - 3.444 Bore INCLUDES VANSChain 201 1990-1994 60 LINKS BALANCE SHAFTBelt B-0153 1989-1994 124 TEETH CAMSHAFT

B-071 1981-1988 124 TEETH CAMSHAFTCam Sprocket S616 1981-1988 40 TEETHCrank Sprocket S417 1981-1987 20 TEETH BELT

S640 1990-1994 36 TEETH BAL. SHAFTBalance Shaft Sprocket S642 1990-1994 18 TEETHBelt Tensioner BT192 1989-1994 CAMSHAFT BELT TENSIONER

BT91 1981-1988 CAMSHAFT BELT TENSIONERChain Tensioner BT298 1990-1994 BAL. SHAFT

200


19 2.4-G (144) SOHC ENG - 1993-94 - 4 Cyl. - 86.5 MM Bore (COLT VISTA,VISTA SE) (MITSUBISHIENG)Belt B-0168 65 TEETH BAL. SHAFT

B-0230 124 TEETH CAMSHAFTBelt Tensioner BT197 BAL. SHAFT

20 2.4-W (144) SOHC ENG - 1992 - 4 Cyl. - 86.5 MM Bore (COLT VISTA) (G64B MITSUBISHI ENG)Belt B-0204 1992 123 TEETH CAMSHAFTBelt Tensioner BT106 BALANCE SHAFT

BT196 CAMSHAFT21 2.4-X ,B (148) DOHC ENG - 1996-00 - 4 Cyl. - 3.44 Bore (1996-00 BREEZE) (1996-00 VOYAGER,

1996-97 GRAND VOYAGER)Chain 201 60 LINKS BALANCE SHAFTBelt B-0265 146 TEETH CAMSHAFT TIMING BELTBalance Shaft Sprocket S642 18 TEETH LOWERChain Tensioner BT298 BAL. SHAFTChain Guide BG297 BAL. SHAFT; LOWER

22 2.5 (153) SOHC ENG - 1986-95 - 4 Cyl. - 3.444 Bore INCLUDES VANSTiming Kit B-0114-1 1986-1987 KIT INCLUDES [B-0114], (2) [S714] & [S709]Chain 201 1986-1995 60 LINKS BALANCE SHAFTBelt B-0114 1986-1987 126 TEETH CAMSHAFT


Cam Sprocket S714 1986-1987 40 TEETHCrank Sprocket S640 1986-1995 36 TEETH CHAIN

S709 1986-1987 20 TEETH BELTBalance Shaft Sprocket S642 18 TEETHBelt Tensioner BT192 1989-1995 BELT

BT94 1986-1988 BELTChain Tensioner BT298 1986-1995 BAL. SHAFTChain Guide BG297 BAL. SHAFT

23 2.6 (2555) SOHC ENG - 1978-86 - 4 Cyl. - 91.1 MM Bore (W/BALANCE SHAFT) (INCLUDESTRUCKS) (G54B MITSUBISHI ENG)Timing Kit 3-102S KIT INCLUDES [3DR102-2] CAMSHAFT KIT & [8MMSR90-1]







Balance Shaft Sprocket S567 17 TEETH (2) REQ.Chain Tensioner BT49 SLEEVEChain Guide BD30 CAMSHAFT; TENSION SIDE


201



25 3.0-3 (181) SOHC ENG - 1987-00 - V6 - 3.587 Bore (INCLUDES MINIVANS) (6G72 MITSUBISHI ENG)Belt B-0139 149 TEETHBelt Tensioner BT195


27 3.3 (201) OHV ENG - 1990-00 - V6 - 3.66 Bore (VIN "R" GAS 1990-00) (VIN "J" CNG 1994-96 CNG)(VIN "G" 1998-00 FLEX) VOYAGER, GRAND VOYAGERCam Thrust Plate MD100 .297 PLATE THICKNESS FOR USE W/S788 CAM SPROCKET3pc Set 3-388S INCLUDES [388], [S788] & [S715] KIT CONTAINS SOFTBACK

CHAIN. REQUIRES BOLT ON SNUBBER (NOT PROVIDED)Chain 388 64 LINKS SOFTBACK CHAIN. REQUIRES BOLT ON SNUBBER



28 3.5-F (215) SOHC ENG - 1997 - V6 - 3.78 BoreBelt B-0255 1997 202 TEETHBelt Tensioner BT357 1997 PULLEY ONLY. DOES NOT INCLUDE BRACKET AND

HYDRAULIC TENSIONER29 3.5-G (215) SOHC ENG - 2000-01 - V6 - 3.78 Bore

Belt B-0295 201 TEETHBelt Tensioner BT357 TENSIONER PULLEY ONLY; DOES NOT INCLUDE BRACKET

AND HYDRAULIC TENSIONER30 3.7 (225) ENG - 1960-83 - 6 Cyl. - 3.400 Bore

3pc Set 3-495S INCLUDES [495], [S314] & [S291]Chain 495 50 LINKSCrank Sprocket S291 19 TEETH

31 230 ENG - 1946-59 - 6 Cyl. - 3.25 Bore (BELVEDERE, FURY, PLAZA, SAVOY, SUBURBAN) L-HEADCam Sprocket S265 1955-1959 38 TEETHCrank Sprocket S127 1946-1954 19 TEETH

S266 1955-1959 19 TEETH32 230 ENG - 1934-45 - 6 Cyl. - 3.25 Bore

Crank Sprocket S127 19 TEETH33 3.8-L (230) OHV ENG - 1994-99 - V6 - 3.78 Bore (INCLUDES MINIVAN)

Cam Thrust Plate MD100 .297 PLATE THICKNESS FOR USE W/S788 CAM SPROCKET3pc Set 3-388S INCLUDES [388], [S788] & [S715] KIT CONTAINS SOFTBACK

CHAIN. REQUIRES BOLT ON SNUBBER (NOT PROVIDED)Chain 388 64 LINKS SOFTBACK CHAIN. REQUIRES BOLT ON SNUBBER



34 239 ENG - 1955-55 - 8 Cyl. - 3 7/16 Bore (BELVEDERE, PLAZA, SAVOY, SUBURBAN)Crank Sprocket S127 19 TEETH

202


35 270 ENG - 1956 - 8 Cyl. - 3.63 Bore (BELVEDERE, FURY, PLAZA, SAVOY, SUBURBAN)Chain 348 68 LINKSCam Sprocket S273 46 TEETHCrank Sprocket S274 23 TEETH


37 5.2 (318) OHV ENG - 1958-89 - 8 Cyl. - 3.91 Bore (INCLUDES TRAILDUSTER AND PB SERIES VANS)3pc Set 3-160S 1965-1988 INCLUDES [160], [S402] & [S297] HEAVY DUTY

ROLLER CHAIN SET3-160S 1989 INCLUDES [160], [S402] & [S297] STANDARD DUTY

ROLLER SET3-361S 1965-1988 INCLUDES [361], [S358] & [S359] STANDARD DUTY

CHAIN SET; CAR APPLICATIONS ONLYChain 160 1965-1988 68 LINKS HEAVY DUTY ROLLER CHAIN

160 1989 68 LINKS STANDARD DUTY ROLLER CHAIN348 1960-1964 68 LINKS STANDARD DUTY361 1965-1988 68 LINKS STANDARD DUTY; CAR APPLICATIONS

ONLY; EXC. HI PERF.Cam Sprocket S273 1960-1964 46 TEETH STANDARD DUTY; USE W/348 CHAIN

S358 1965-1988 46 TEETH STANDARD DUTY; USE W/361 CHAIN;CAR APPLICATIONS ONLY; EXC. HI PERF.

S402 1965-1988 46 TEETH HEAVY DUTY; USE W/160 CHAINS402 1989 46 TEETH STANDARD DUTY; USE W/160 CHAIN

Crank Sprocket S274 1960-1964 23 TEETH STANDARD DUTY; USE W/348 CHAINS297 1965-1988 23 TEETH HEAVY DUTY; USE W/160 CHAINS297 1989 23 TEETH STANDARD DUTY; USE W/160 CHAINS359 1965-1988 23 TEETH STANDARD DUTY; USE W/361 CHAIN;

CAR APPLICATIONS ONLY38 340 ENG - 1968-73 - 8 Cyl. - 4.04 Bore


39 350 ENG - 1958 - 8 Cyl. - 4 1/16 BoreChain 495 50 LINKSCrank Sprocket S291 19 TEETH

40 5.9 (360) OHV ENG - 1971-80 - 8 Cyl. - 4.00 Bore (INCLUDES TRAILDUSTER & PB SERIES VANS)3pc Set 3-160S INCLUDES [160], [S402] & [S297] HEAVY DUTY

3-361S INCLUDES [361], [S358] & [S359] STANDARD DUTYChain 160 68 LINKS HEAVY DUTY CHAIN

361 68 LINKS STANDARD DUTY CHAINCam Sprocket S358 46 TEETH USE W/ 361 STANDARD DUTY CHAIN

S402 46 TEETH USE W/ 160 HEAVY DUTY CHAINCrank Sprocket S297 23 TEETH USE W/ 160 HEAVY DUTY CHAIN

S359 23 TEETH USE W/ 361 STANDARD DUTY CHAIN41 361 ENG - 1959-66 - 8 Cyl. - 4 1/8 Bore


Cam Sprocket S340 50 TEETH HEAVY DUTY; USE W/ 3 BOLT CAMCrank Sprocket S291 19 TEETH STANDARD DUTYContinued on Next Page

203


41 361 ENG - 1959-66 - 8 Cyl. - 4 1/8 Bore (Continued)Crank Sprocket S339 25 TEETH HEAVY DUTY


3-501SA 1966-1971 INCLUDES [501], [S366] & [S367] STANDARD DUTYChain 168 66 LINKS HEAVY DUTY


Cam Sprocket S366 1966-1971 38 TEETH STANDARD DUTYS380 50 TEETH HEAVY DUTY






S367 19 TEETH STANDARD DUTY44 413 ENG - 1962 - 8 Cyl. - 4 3/16 Bore


45 426 HEMI ENG - 1966-71 - 8 Cyl. - 4 1/4 Bore3pc Set 3-168S INCLUDES [168], [S340] & [S339]Chain 168 66 LINKSCam Sprocket S340 50 TEETH USE W/ 3 BOLT CAMCrank Sprocket S339 25 TEETH

46 426 WEDGE ENG - 1963-65 - 8 Cyl. - 4 1/4 Bore3pc Set 3-168SA INCLUDES [168], [S380] & [S339] H.D.Chain 168 66 LINKS H.D.


S339 25 TEETH H.D.47 440 ENG - 1966-78 - 8 Cyl. - 4.32 Bore (INCLUDES TRUCKS & VANS)

3pc Set 3-168S 1969-1972 INCLUDES [168], [S340] & [S339] HEAVY DUTY; USEW/3 BOLT CAM & STOCK 3X2BC

3-168SA INCLUDES [168], [S380] & [S339] HEAVY DUTY; USE W/SINGLEBOLT CAM

3-501SA INCLUDES [501], [S366] & [S367] STANDARD DUTY; EXC. HIPERF. ENG.

Chain 168 66 LINKS HEAVY DUTY501 50 LINKS STANDARD DUTY; EXC. HI PERF. ENG.

Cam Sprocket S340 1969-1972 50 TEETH HEAVY DUTY; USE W/3 BOLT CAM;W/STOCK 3X2BC

S366 38 TEETH STANDARD DUTY; EXC. HI PERF. ENG.S380 50 TEETH HEAVY DUTY; SINGLE BOLT CAM

Crank Sprocket S339 25 TEETH HEAVY DUTYS367 19 TEETH STANDARD DUTY; EXC. HI PERF. ENG.

204

PONTIACEngine Year Line Engine Year Line Engine Year Line

4 Cyl.1.6-6 (98) SOHC 1988-93 11.6-C,9 (98) SOHC 1981-87 21.6-6,E (98) DOHC 2005-10 31.8-D (110) 1981-86 41.8-0 (112) OHC 1982-86 51.8-J (112) OHC 1984-86 61.8-8 (1794CC) DOHC 2003-08 72.0-B (121) 1983 82.0-H (121) OHC 1992-94 92.0-P OHV (122) 1983-86 102.0-K (122) SOHC 1987-91 112.0-M (122) OHC 1987-90 122.0-X (122) DOHC 2007-09 132.2-4 (134) OHV 1995-02 142.2-F,H (134) DOHC 2002-10 152.3-3 (138) SOHC 1992-94 162.3-A (138) DOHC 1989-94 172.3-D (138) DOHC 1988-95 18140 1975-77 192.4-B,0 (145) DOHC 2006-10 202.4-T (146) DOHC 1996-02 21151-1 1978-79 22151-9 1979 23151-V 1977-80 242.5-2 (151) 1982-86 252.5-5 (151) 1980-83 262.5-F (151) 1982-83 272.5-R (151) 1982-91 282.5-U (151) 1985-91 296 Cyl.2.8-1 (173) 1982-84 302.8-7 (173) 1980 312.8-9 (173) 1985-88 322.8-L (173) 1983-84 332.8-S (173) 1985-89 342.8-W (173) 1985-89 352.8-X (173) 1981-86 362.8-Z (173) 1982-84 373.0-L (181) 1985-87 383.1-D (189) 1990-95 393.1-J (189) 2000-03 403.1-M (189) OHV 1994-99 41

6 Cyl. (Continued)

3.1-T (189) 1988-94 423.1-V (189) 1989-90 434 Cyl.3.2 (195) OHV 1961-63 446 Cyl.3.3-N (204) 1992-93 453.4-S (207) 1993-95 463.4-E (207) 1996-05 47

3.4-X (207) DOHC 1991-96 486 Cyl.3.4-F (207) OHV 2006-09 493.5-L,8 (213) OHV 2005-06 503.5-K,N (213) INCLUDESFLEX FUEL

2007-10 51

215 1964-65 528 Cyl.215 1961-62 536 Cyl.3.6-7 (217) DOHC 2007-09 54229-9 1980-81 55231-2 1979 56231-A 1977-87 57231-C 1976-77 583.8-1 (231) OHV 1992-03 593.8-2,4 (231) OHV 2004-08 603.8-3 (231) 1987-88 613.8-7 (231) 1989 623.8-C (231) 1988-91 633.8-K (231) 1995-05 643.8-L (231) 1992-95 653.9-1,W (237) OHV 2006-09 66250 OHV 1970-76 674.1-4 (252) 1982 688 Cyl.260-F 1975-76 69

4.3-Z (262) 1985-87 708 Cyl.4.3-S (265) 1980-81 71267-J 1979-82 72287 1955 73

8 Cyl. (Continued)

301-W 1978-81 74301-Y 1977-79 754.9-T (301) 1980-81 765.0 (305) 1977-92 77307 1971-72 785.0-Y (307) OHV 1986-89 795.0-Y (307) OHV 1981 80316 1956 815.3-C (323) OHV 2005-08 82326 1963-67 83347 1957 84350 1968-71 85350 1972-76 86350-X OHV 1978-80 87350-H,J OHV 1975-76 88350-L 1977-79 89350-P OHV 1976-77 90350-R 1977-80 915.7 (350N) 1980-85 925.7-8 (350) 1987-92 935.7-G (350) OHV 1998-02 945.7-P (350) 1993-97 955.7 (350) OHV 2004 966.0-U (364) OHV 2005-06 976.0-Y (364) OHV 2008-09 986.1 (370) OHV ENG 1958 996.2-W (376) OHV 2009 100389 1959-66 101400 1977-79 102400 1973-76 103400 1972 104400 1971 105400 1970 106400 1969 107400 1968 108400 1967 109403 1977-79 110421 1963-66 111428 1967-69 112455 OHV 1970-76 113


1 1.6-6 (98) SOHC ENG - 1988-93 - 4 Cyl. - 3.11 Bore (OPEL ENG)Belt B-0148 1988-1989 104 TEETH

B-0148 1990 104 TEETH 1ST DES.B-0203 1990 111 TEETH 2ND DES.B-0203 1991-1993 111 TEETH

2 1.6-C,9 (98) SOHC ENG - 1981-87 - 4 Cyl. - 3.23 Bore (CHEVROLET) (1981 1.6-9) (1982-87 1.6-C)Belt B-061 100 TEETHCrank Sprocket S611 19 TEETH W/SPACER ATTACHED

205

PONTIAC (Continued)LineNo. Part Title Part No Description

3 1.6-6,E (98) DOHC ENG - 2005-10 - 4 Cyl. - 3.11 Bore (G3,G3WAVE,WAVE,WAVE5)Belt B-0310 2005 127 TEETH

4 1.8-D (110) ENG - 1981-86 - 4 Cyl. - 3.307 Bore ACADIAN CANADA ONLY (DIESEL)Belt B-076 134 TEETHBelt Guide BG94

5 1.8-0 (112) OHC ENG - 1982-86 - 4 Cyl. - 3.346 Bore (T.B.I.) (BRAZILIAN ENG)Belt B-081 111 TEETH

6 1.8-J (112) OHC ENG - 1984-86 - 4 Cyl. - 3.346 Bore (TURBO) (BRAZILIAN ENG)Belt B-081 111 TEETH

7 1.8-8 (1794CC) DOHC ENG - 2003-08- 4 Cyl. - 79 MM Bore (VIBE BASE MODEL) 1ZZFE TOYOTAENGINETiming Kit 3-4200SA 2003-2008 SOLD AS KIT ONLY; KIT INCLUDES (1) CHAIN,(1)

TENSIONER,(2) GUIDES,(1) CAM SPROCKET,(1) CRANKSPROCKET, (1) SEAL, (2) SHIMS, (1) PIVOT BOLT

8 2.0-B (122) ENG - 1983 - 4 Cyl. - 3.504 Bore (J2000)(CHEVROLET ENG) CANADA3pc Set 3-370S INCLUDES [395], [S558], [S549] & [MPC-393]Chain 395 58 LINKSCam Sprocket S558 40 TEETHCrank Sprocket S549 20 TEETHChain Tensioner BT5115

9 2.0-H (121) OHC ENG - 1992-94 - 4 Cyl. - 3.385 Bore (BRAZILIAN ENG)Belt B-0163 125 TEETH

10 2.0-P OHV (122) ENG - 1983-86 - 4 Cyl. - 3.39 Bore (J2000,J2000 SUNBIRD,SUNBIRD)(TBI)(CHEVROLET ENG)3pc Set 3-370S INCLUDES [395], [S558], [S549] & [MPC-393]Chain 395 58 LINKSCam Sprocket S558 40 TEETHCrank Sprocket S549 20 TEETHChain Tensioner BT5115

11 2.0-K (122) SOHC ENG - 1987-91 - 4 Cyl. - 3.39 Bore (1987-89 E.F.I.) (1990-91 T.B.I.) (OPEL ENG)Belt B-0163 1989-1991 125 TEETH

B-081 1987-1988 111 TEETH12 2.0-M (122) OHC ENG - 1987-90 - 4 Cyl. - 3.385 Bore (M.F.I. TURBO) (BRAZILIAN ENG)


13 2.0-X (122) DOHC ENG - 2007-09 - 4 Cyl. - 3.38 Bore (SOLSTICE) ECOTECTiming Kit 3-4201SX KIT INCLUDES [4201F], [BT5481], [BG5375], [BG5381], [BG5382],

[5467N] (DOES NOT INCLUDE SPROCKETS) TIMING CHAIN KITOil Jet Nozzle 5467NChain 4201F 148 LINKS CAMSHAFT CHAIN

4202F 134 LINKS BALANCE SHAFT CHAINCrank Sprocket S849 23 TEETH OUTER SPROCKET

S851 42 TEETH INNER SPROCKETWater Pump Sprocket S911 40 TEETHChain Tensioner BT5383 BALANCE SHAFT CHAIN TENSIONER; LOWER


Chain Guide BG5375 CAMSHAFT CHAIN GUIDE; RIGHT HANDBG5381 CAMSHAFT CHAIN GUIDE; LEFT HANDBG5382 CAMSHAFT CHAIN GUIDE; CENTER UPPERBG5384 BALANCE SHAFT CHAIN GUIDE; RIGHT HAND LOWERBG5385 BALANCE SHAFT CHAIN GUIDE; LEFT HAND LOWER


206


13 2.0-X (122) DOHC ENG - 2007-09 - 4 Cyl. - 3.38 Bore (SOLSTICE) ECOTEC (Continued)Chain Guide BG5386 BALANCE SHAFT CHAIN GUIDE; UPPER

14 2.2-4 (134) OHV ENG - 1995-02 - 4 Cyl. - 3.500 Bore (SUNFIRE)3pc Set 3-370SA INCLUDES [395], [S774], [S549] & [MPC-393]

3-395S INCLUDES [370], [S774], [S549], [BT5115] & [MPC-393] RETROFIT FINE FINISH CHAIN SET, CHECK FOR POSSIBLE OILINGPROBLEM WHEN INSTALLING SET.

Chain 395 58 LINKSCam Thrust Plate Spacer MG221 1995-1996Cam Sprocket S774 40 TEETHCrank Sprocket S549 20 TEETHChain Tensioner BT5115 FOR USE WITH BOTH [370] AND [395] CHAINS

15 2.2-F,H (134) DOHC ENG - 2002-10 - 4 Cyl. - 3.39 MM Bore (G5,GRAND AM,PURSUIT,SUNFIRE)ECOTECTiming Kit 3-4201S KIT INCLUDES [4201F], (2) [S850], [S849], [BT5481], [BG5375],

[BG5381], [BG5382], [5467N], (2) [5496B] (INCLUDESSPROCKETS) TIMING CHAIN KIT

3-4201SX KIT INCLUDES [4201F], [BT5481], [BG5375], [BG5381], [BG5382],[5467N] (DOES NOT INCLUDE SPROCKETS) TIMING CHAIN KIT

3-4202S 2002-2008 KIT INCLUDES [4202F], [S853], [S855], [S851],[BT5383], [BG5384], [BG5385], [BG5386] BALANCE SHAFTCHAIN KIT


4202F 134 LINKS BALANCE SHAFT CHAINCam Sprocket S850 46 TEETH 2 REQUIRED; CAMSHAFT CHAIN SPROCKETCrank Sprocket S849 23 TEETH OUTER SPROCKET

S851 42 TEETH INNER SPROCKETBalance Shaft Sprocket S853 2002-2008 21 TEETH LEFT HAND; INTAKE

S855 2002-2008 21 TEETH RIGHT HAND; EXHAUSTWater Pump Sprocket S911 40 TEETHChain Tensioner BT5383 BALANCE SHAFT CHAIN TENSIONER; LOWER


Chain Guide BG5375 CAMSHAFT CHAIN GUIDE; RIGHT HANDBG5381 CAMSHAFT CHAIN GUIDE; LEFT HANDBG5382 CAMSHAFT CHAIN GUIDE; CENTER UPPERBG5384 BALANCE SHAFT CHAIN GUIDE; RIGHT HAND LOWERBG5385 BALANCE SHAFT CHAIN; LEFT HAND LOWERBG5386 BALANCE SHAFT CHAIN GUIDE; UPPER

16 2.3-3 (138) SOHC ENG - 1992-94 - 4 Cyl. - 3.62 Bore3pc Set 3-384S INCLUDES [384], [S734] & [S747]Chain 384 124 LINKS

384M 124 LINKS FINE FINISHCam Sprocket S734 38 TEETHCrank Sprocket S747 19 TEETHChain Guide BG305 LEFT HAND

BG307 RIGHT HAND17 2.3-A (138) DOHC ENG - 1989-94 - 4 Cyl. - 3.62 Bore


Chain 383 1989-1994 130 LINKS STANDARD FINISH CHAIN 2ND DES.Continued on Next Page

207


17 2.3-A (138) DOHC ENG - 1989-94 - 4 Cyl. - 3.62 Bore (Continued)Chain 383M 130 LINKS FINE FINISH CHAIN

3DR130 1989-1991 130 LINKS 1ST DES.Cam Sprocket S692 1989-1991 38 TEETH 1ST DES. (2) REQ.

S734 1989-1994 38 TEETH 2ND DES. (2) REQ.Crank Sprocket S653 1989-1991 19 TEETH 1ST DES.

S747 1989-1994 19 TEETH 2ND DES.Chain Tensioner BT188 1989-1991 1ST DES.Chain Guide BG304 1989-1994 2ND DES. 23MM WIDE- RIGHT HAND


18 2.3-D (138) DOHC ENG - 1988-95 - 4 Cyl. - 3.62 BoreTiming Kit 3-383SB KIT INCLUDES [383], (2) [S734], [S747], [BG304], [BG305] &



Chain 383 1988-1995 130 LINKS STANDARD FINISH CHAIN 2ND DES.383M 130 LINKS FINE FINISH CHAIN3DR130 1988-1991 130 LINKS 1ST DES.

Cam Sprocket S692 1988-1991 38 TEETH 1ST DES. (2) REQ.S734 1988-1995 38 TEETH 2ND DES. (2) REQ.

Crank Sprocket S653 1988-1991 19 TEETH 1ST DES.S747 1988-1995 19 TEETH 2ND DES.

Chain Tensioner BT188 1988-1991 1ST DES.Chain Guide BG304 1988-1995 2ND DES. 23MM WIDE- RIGHT HAND


19 140 ENG - 1975-77 - 4 Cyl. - 3 1/2 Bore (CHEVROLET)Belt B-012 91 TEETHCam Sprocket S426 36 TEETH

20 2.4-B,0 (145) DOHC ENG - 2006-10 - 4 Cyl. - 3.46 Bore (G6,SOLSTICE) ECOTECTiming Kit 3-4201SX KIT INCLUDES [4201F], [BT5481], [BG5375], [BG5381], [BG5382],

[5467N] (DOES NOT INCLUDE SPROCKETS) TIMING CHAIN KIT3-4202S KIT INCLUDES [4202F], [S853], [S855], [S851], [BT5383],

[BG5384], [BG5385], [BG5386] BALANCE SHAFT CHAIN KITOil Jet Nozzle 5467NCamshaft Bolt 5496B TORQUE TO YIELD BOLT 2 REQUIREDChain 4201F 148 LINKS CAMSHAFT TIMING CHAIN

4202F 134 LINKS BALANCE SHAFT CHAINCrank Sprocket S849 23 TEETH OUTER


S855 21 TEETH RIGHT HAND; EXHAUSTChain Tensioner BT5383 BALANCE SHAFT CHAIN TENSIONER; LOWER


Chain Guide BG5375 CAMSHAFT CHAIN GUIDE; RIGHT HANDBG5381 CAMSHAFT CHAIN GUIDE; LEFT HANDBG5382 CAMSHAFT CHAIN GUIDE; CENTER UPPERBG5384 BALANCE SHAFT CHAIN GUIDE; RIGHT HAND LOWERBG5385 BALANCE SHAFT CHAIN; LEFT HAND LOWERBG5386 BALANCE SHAFT CHAIN GUIDE; UPPER

208


21 2.4-T (146) DOHC ENG - 1996-02 - 4 Cyl. - 3.54 Bore (GRAND AM, SUNFIRE)Timing Kit 3-390SA 1997-2002 KIT INCLUDES [390], (2) [S804T], [S805], [BT355],

[BT356], [BG365], [BG366], [BG367]3pc Set 3-390S INCLUDES [390], (2) [S804T], [S805]Chain 390 130 LINKSCam Sprocket S804T 38 TEETH 2 REQUIREDCrank Sprocket S805 19 TEETHChain Tensioner BT355 1997-2002 TENSIONER ARM

BT356 1997-2002 HYDRAULIC (2ND DESIGN)Chain Guide BG365 1996-2002 RIGHT HAND; CAMSHAFT

BG366 1996-2002 LEFT HAND; CAMSHAFTBG367 1996-2002 UPPER; CAMSHAFTBG368 1996-1997 BAL SHAFT

22 151-1 ENG - 1978-79 - 4 Cyl. - 4.000 BoreGear Set 2538S ALUM. INCLUDES [2524] & [2537]



23 151-9 ENG - 1979 - 4 Cyl. - 4.000 BoreGear Set 2538S ALUM. INCLUDES [2524] & [2537]



24 151-V ENG - 1977-80 - 4 Cyl. - 4.000 BoreGear Set 2538S ALUM. INCLUDES [2524] & [2537]



25 2.5-2 (151) ENG - 1982-86 - 4 Cyl. - 4.000 BoreGear Set 2538S ALUM. INCLUDES [2524] & [2537]



26 2.5-5 (151) ENG - 1980-83 - 4 Cyl. - 4.000 BoreGear Set 2538S ALUM. INCLUDES [2524] & [2537]



27 2.5-F (151) ENG - 1982-83 - 4 Cyl. - 4.000 BoreGear Set 2538S ALUM. INCLUDES [2524] & [2537]


2542 54 TEETH FIBERContinued on Next Page

209


27 2.5-F (151) ENG - 1982-83 - 4 Cyl. - 4.000 Bore (Continued)Crank Gear 2537 27 TEETHCam Thrust Plate Spacer MG221

28 2.5-R (151) ENG - 1982-91 - 4 Cyl. - 4.000 Bore3pc Set 3-378SA 1991 INCLUDES [378], [S690] & [S713]Chain 378 1991 56 LINKSGear Set 2538S 1982-1986 ALUM. INCLUDES [2524] & [2537]


2542 1982-1990 54 TEETH FIBERCrank Gear 2537 1982-1990 27 TEETHCam Thrust Plate Spacer MG221Cam Sprocket S690 1991 42 TEETHCrank Sprocket S713 1991 21 TEETHChain Tensioner BT220 1991

29 2.5-U (151) ENG - 1985-91 - 4 Cyl. - 4.000 Bore3pc Set 3-378S 1990-1991 INCLUDES [378], [S690] & [S695]Chain 378 1990-1991 56 LINKSGear Set 2544S 1985-1989 INCLUDES [2544] & [2537]Cam Gear 2544 1985-1989 54 TEETHCrank Gear 2537 1985-1989 27 TEETHCam Sprocket S690 1990-1991 42 TEETHCrank Sprocket S695 1990-1991 21 TEETHChain Tensioner BT143 1990-1991


31 2.8-7 (173) ENG - 1980 - V6 - 89 MM Bore3pc Set 3-373S INCLUDES [373], [S506] & [S511]Chain 373 64 LINKSCam Sprocket S506 40 TEETHCrank Sprocket S511 20 TEETHDamper BD59


33 2.8-L (173) ENG - 1983-84 - V6 - 3.504 Bore3pc Set 3-373S INCLUDES [373], [S506] & [S511]Chain 373 64 LINKSCam Sprocket S506 40 TEETHCrank Sprocket S511 20 TEETHDamper BD59

34 2.8-S (173) ENG - 1985-89 - V6 - 89 MM Bore3pc Set 3-373S INCLUDES [373], [S506] & [S511]Chain 373 64 LINKSCam Sprocket S506 40 TEETHCrank Sprocket S511 20 TEETHContinued on Next Page

210


34 2.8-S (173) ENG - 1985-89 - V6 - 89 MM Bore (Continued)Damper BD59

35 2.8-W (173) ENG - 1985-89 - V6 - 89 MM Bore3pc Set 3-372S 1987-1989 INCLUDES [385], [S620] & [S619]




S619 1987-1989 20 TEETHDamper BD131 1987-1989

BD59 1985-198636 2.8-X (173) ENG - 1981-86 - V6 - 89 MM Bore


37 2.8-Z (173) ENG - 1982-84 - V6 - 89 MM Bore3pc Set 3-373S INCLUDES [373], [S506] & [S511]Chain 373 64 LINKSCam Sprocket S506 40 TEETHCrank Sprocket S511 20 TEETHDamper BD59

38 3.0-L (181) ENG - 1985-87 - V6 - 3.800 Bore3pc Set 3-359SC INCLUDES [359], [S610] & [S621] 1985 2ND DES. & 1986-88Chain 359 54 LINKSCam Button CB100 W/SPRINGCam Sprocket S610 40 TEETHCrank Sprocket S609 1985 20 TEETH 1ST DES. SPLINED DRIVE W/32MM THICK



Damper BD58 W/SPRING39 3.1-D (189) ENG - 1990-95 - V6 - 3.503 Bore (TRANSPORT)

3pc Set 3-372S INCLUDES [385], [S620] & [S619]Chain 385 64 LINKSCam Sprocket S620 40 TEETHCrank Sprocket S619 20 TEETHChain Tensioner BT5536 1994-1995 INCLUDES GASKET AND 2 MOUNTING BOLTS

DAMPERDamper BD131 1990-1993

40 3.1-J (189) ENG - 2000-03 - V6 - 3.50 Bore (GRAND PRIX)Timing Kit 3-700SB KIT INCLUDES [700], [S847], [S848], [BD600]3pc Set 3-700S INCLUDES [700], [S847], [S848]Chain 700 80 LINKSCam Sprocket S848 50 TEETHCrank Sprocket S847 25 TEETHDamper BD600

211




W/79 LINK CHAIN; 50 TOOTH CAM SPROCKET; 25 TOOTHCRANK SPROCKET




Chain 385 1994-1998 64 LINKS 1ST DES.700 1999 80 LINKS 2ND DES. W/80 LINKS

Cam Thrust Plate Spacer MG221 1994-1995Cam Sprocket S756 1994-1998 40 TEETH

S756 1999 40 TEETH 1ST DES.S848 1999 50 TEETH 2ND DES.


Damper BD336 1994-1998 1ST DES.BD600 1999 2ND DES.

42 3.1-T (189) ENG - 1988-94 - V6 - 3.503 Bore (CAR)3pc Set 3-372S INCLUDES [385], [S620] & [S619] EXC. FIREBIRD

3-373S 1990-1992 INCLUDES [373], [S506] & [S511] FIREBIRD ONLYChain 373 1990-1992 64 LINKS FIREBIRD ONLY

385 64 LINKS EXC. FIREBIRDCam Sprocket S506 1990-1992 40 TEETH FIREBIRD ONLY

S620 40 TEETH EXC. FIREBIRDCrank Sprocket S511 1990-1992 20 TEETH FIREBIRD ONLY

S619 20 TEETH EXC. FIREBIRDDamper BD131 EXC. FIREBIRD

BD59 1990-1992 FIREBIRD ONLY43 3.1-V (189) ENG - 1989-90 - V6 - 3.503 Bore


44 3.2 (195) OHV ENG - 1961-63 - 4 Cyl. - 4 1/16 Bore (TEMPEST, LEMANS)3pc Set 3-350S INCLUDES [350], [S305] & [S371]Chain 350 60 LINKS

45 3.3-N (204) ENG - 1992-93 - V6 - 3.700 Bore3pc Set 3-377SA INCLUDES [377], [S726] & [S621]Chain 377 54 LINKSCam Sprocket S726 40 TEETHCrank Sprocket S621 20 TEETHDamper BD295 1992 2ND DES. W/COUNTER- BORED DAMPER BOLT HOLE

BD295 1993BD58 1992 1ST DES. W/CHAMFERED DAMPER BOLT HOLE

212


46 3.4-S (207) ENG - 1993-95 - V6 - 3.62 Bore3pc Set 3-373S INCLUDES [373], [S506] & [S511]Chain 373 64 LINKSCam Sprocket S506 40 TEETHCrank Sprocket S511 20 TEETHDamper BD59 1993

47 3.4-E (207) ENG - 1996-05 - V6 - 3.62 Bore (FIREBIRD,GRAND AM,GRAND PRIX) (TRANSPORT,AZTEK, MONTANA) INCLUDES VANSTiming Kit 3-385SC 1996-1999 KIT INCLUDES [385], [S619], [S756], [BD336]





S847 2000-2005 25 TEETHDamper BD336 1996-1999

BD600 2000-200548 3.4-X (207) DOHC ENG - 1991-96 - V6 - 3.62 Bore

3pc Set 3-382S INCLUDES [382], [S719] & [S758]Chain 382 64 LINKS CRANKSHAFT TO INTERMEDIATE SHAFTBelt B-0192 1991-1995 169 TEETH INTERMEDIATE SHAFT TO CAMSHAFTS

B-0273 1996 200 TEETH INTERMEDIATE SHAFT TO CAMSHAFTSCrank Sprocket S719 20 TEETHIntermediate Sprocket S758 1991-1994 40 TEETH CHAIN DRIVEBelt Tensioner BT308 CHAIN DRIVE

49 3.4-F (207) OHV ENG - 2006-09 - V6 - 3.62 Bore (TORRENT) 12VTiming Kit 3-700SB 2006-2007 KIT INCLUDES [700], [S847], [S848], [BD600]3pc Set 3-700S 2006-2007 INCLUDES [700], [S847], [S848]Chain 700 80 LINKSCam Sprocket S848 2006-2007 50 TEETHCrank Sprocket S847 25 TEETHDamper BD600

50 3.5-L,8 (213) OHV ENG - 2005-06 - 6 Cyl. - 3.70 Bore (G6,MONTANA) GAS ENG.Timing Kit 3-700SB KIT INCLUDES [700], [S847], [S848], [BD600]3pc Set 3-700S INCLUDES [700], [S847], [S848]Chain 700 80 LINKSCam Sprocket S848 50 TEETHCrank Sprocket S847 25 TEETHDamper BD600 G6 ONLY

51 3.5-K,N (213) OHV ENG - 2007-10 - 6 Cyl. - 3.90 Bore (G6) GAS/FLEX FUEL ENGChain 700 80 LINKSCrank Sprocket S847 25 TEETH

52 215 ENG - 1964-65 - 6 Cyl. - 3 3/4 Bore LEMANSCam Gear 2542 54 TEETH FIBERCrank Gear 2501 27 TEETH

53 215 ENG - 1961-62 - 8 Cyl. - 3.50 Bore SKYLARK,SPECIAL(BUICK ENG)3pc Set 3-359S INCLUDES [359], [S334] & [S323]Chain 359 54 LINKSCam Sprocket S334 40 TEETHCrank Sprocket S323 20 TEETH

213


54 3.6-7 (217) DOHC ENG - 2007-09 - 6 Cyl. - 3.70 Bore (2007-09 G6) (2008-09 G8) (2008-09 TORRENT)Timing Kit 3-753S INCLUDES [753], (2) [754], [S921], [S930], [S932], [BT5535],











55 229-9 ENG - 1980-81 - V6 - 3.736 Bore (229-K 1980-81)3pc Set 3-163S INCLUDES [163], [S288] & [S289] H.D.




S505 18 TEETH56 231-2 ENG - 1979 - V6 - 3.800 Bore (BUICK)

3pc Set 3-359SB INCLUDES [359], [S610] & [S323]Chain 359 54 LINKSCam Sprocket S610 40 TEETHCrank Sprocket S323 20 TEETHDamper BD44 RIGHT HAND W/SPRING

BD45 LEFT HAND57 231-A ENG - 1977-87 - V6 - 3.800 Bore (BUICK)

3pc Set 3-359SB INCLUDES [359], [S610] & [S323]Chain 359 54 LINKSCam Button CB100 W/SPRINGCam Sprocket S610 40 TEETHCrank Sprocket S323 20 TEETHDamper BD44 1977-1987 RIGHT HAND W/SPRING

BD45 1977-1981 LEFT HAND58 231-C ENG - 1976-77 - V6 - 3.800 Bore (BUICK-ODD FIRE)

3pc Set 3-359S INCLUDES [359], [S334] & [S323] NON-INTEGRAL DIST. DRIVEGEAR

Chain 359 54 LINKSCam Button CB100 W/SPRINGCam Sprocket S334 40 TEETHCrank Sprocket S323 20 TEETHContinued on Next Page

214


58 231-C ENG - 1976-77 - V6 - 3.800 Bore (BUICK-ODD FIRE) (Continued)Damper BD44 RIGHT HAND W/SPRING

BD45 LEFT HAND59 3.8-1 (231) OHV ENG - 1992-03 - V6 - 3.800 Bore SUPERCHARGED

3pc Set 3-375SA 1992-1994 INCLUDES [375], [S716] & [S729]3-381AS 1995 INCLUDES [381A], [S810], [S811]3-381ASB 1996-2003 INCLUDES [381A], [S811] & [S812]

Chain 375 1992-1994 54 LINKS381A 1995-2003 64 LINKS

Cam Sprocket S716 1992-1994 40 TEETHS810 1995 48 TEETHS812 1996-2003 48 TEETH


Damper BD295 1992 2ND DES. W/COUNTER BORED DAMPER BOLT HOLEBD295 1993-1994BD344 1995-2003BD58 1992 1ST DES. W/CHAMFERED DAMPER BOLT HOLE

60 3.8-2,4 (231) OHV ENG - 2004-08 - 6 Cyl. - 3.80 Bore (VIN 2 GRAND PRIX) (VIN 4 GRAND PRIXW/SC) BUICK ENGINE3pc Set 3-381AS INCLUDES [381A], [S810], [S811] VIN CODE 2 ONLY - NON

SUPERCHARGED3-381ASB 2004-2007 INCLUDES [381A], [S811] & [S812] VIN CODE 4 ONLY

- SUPERCHARGEDChain 381A 64 LINKSCam Sprocket S810 48 TEETH VIN CODE 2 ONLY - NON SUPERCHARGED

S812 2004-2007 48 TEETH VIN CODE 4 ONLY - SUPERCHARGEDCrank Sprocket S811 24 TEETHDamper BD344

61 3.8-3 (231) ENG - 1987-88 - V6 - 3.800 Bore3pc Set 3-359SC INCLUDES [359], [S610] & [S621]Chain 359 54 LINKSCam Button CB100 W/SPRINGCam Sprocket S610 40 TEETHCrank Sprocket S621 20 TEETHDamper BD58 W/SPRING

62 3.8-7 (231) ENG - 1989 - V6 - 3.800 Bore (TURBO)3pc Set 3-359SB INCLUDES [359], [S610] & [S323]Chain 359 54 LINKSCam Sprocket S610 40 TEETHCrank Sprocket S323 20 TEETHDamper BD44 1989 RIGHT HAND W/SPRING


3-375SA 1991 INCLUDES [375], [S716] & [S729]Chain 375 54 LINKSCam Button CB300 1988-1990Cam Sprocket S716 1991 40 TEETH SINGLE BOLT

S718 1988-1990 40 TEETH 3 BOLTCrank Sprocket S729 20 TEETHDamper BD295 1988-1991 2ND DES. W/COUNTER- BORED DAMPER BOLT

HOLEBD58 1988-1991 1ST DES. W/CHAMFERED DAMPER BOLT HOLE

215



65 3.8-L (231) ENG - 1992-95 - V6 - 3.800 Bore3pc Set 3-375SA 1992-1994 INCLUDES [375], [S716] & [S729]




S811 1995 24 TEETHDamper BD295 1992 2ND DES. W/COUNTER- BORED DAMPER BOLT HOLE

BD295 1993-1994BD344 1995BD58 1992 1ST DES. W/CHAMFERED DAMPER BOLT HOLE

66 3.9-1,W (237) OHV ENG - 2006-09 - 6 Cyl. - 3.90 Bore (G6,MONTANA) INCLUDES FLEX FUELTiming Kit 3-700SB 2006 KIT INCLUDES [700], [S847], [S848], [BD600] 2007-09

REQUIRE ACTUATOR3pc Set 3-700S 2006 INCLUDES [700], [S847], [S848] 2007-09 REQUIRE

ACTUATORChain 700 80 LINKSCam Sprocket S848 2006 50 TEETH W/O ACTUATORCrank Sprocket S847 25 TEETHDamper BD600

67 250 OHV ENG - 1970-76 - 6 Cyl. - 3.68,3.88 Bore (CHEVROLET)Gear Set 2525S 1970-1974 INCLUDES [2524] & [2501]

2538S 1975-1976 ALUM. INCLUDES [2524] & [2537] W/#71 STAMPEDON OEM CRANK GEAR HUB

2540S 1976 INCLUDES [2526] & [2541] W/#20 STAMPED ON OEMCRANK GEAR HUB

Cam Gear 2524 1970-1975 54 TEETH ALUMINUM2524 1976 54 TEETH ALUMINUM W/#14 STAMPED ON OEM GEAR

HUB2526 1976 54 TEETH W/#20 STAMPED ON CRANK GEAR HUB2542 1970-1975 54 TEETH FIBER2542 1976 54 TEETH FIBER W/#14 STAMPED ON OEM GEAR HUB

Crank Gear 2501 1970-1974 27 TEETH2537 1975 27 TEETH W/INTAKE MANIFOLD CAST AS INTEGRAL

PART OF CYL. HEAD2537 1976 27 TEETH W/#71 STAMPED ON GEAR HUB

Cam Thrust Plate Spacer MG22168 4.1-4 (252) ENG - 1982 - V6 - 3.965 Bore (BUICK)


216


69 260-F ENG - 1975-76 - 8 Cyl. - 3.500 Bore OLDS ENGINE)3pc Set 3-498SC INCLUDES [498], [S348] & [S349]Chain 498 48 LINKSCam Sprocket S348 36 TEETHCrank Sprocket S349 18 TEETH

70 4.3-Z (262) ENG - 1985-87 - V6 - 4.000 Bore3pc Set 3-499SA 1985-1986 INCLUDES [499], [S390] & [S505]

3-506SB 1987 INCLUDES [499], [S732] & [S505]Chain 499 46 LINKSCam Sprocket S390 1985-1986 36 TEETH

S732 1987 36 TEETHCrank Sprocket S505 18 TEETH

71 4.3-S (265) ENG - 1980-81 - 8 Cyl. - 3.750 Bore3pc Set 3-365S INCLUDES [365], [S494] & [S495]Chain 365 60 LINKSCam Sprocket S494 42 TEETHCrank Sprocket S495 21 TEETH

72 267-J ENG - 1979-82 - 8 Cyl. - 3.500 Bore (CHEVROLET ENG)3pc Set 3-163S INCLUDES [163], [S288] & [S289] HEAVY DUTY




S391 18 TEETH STANDARD DUTY73 287 ENG - 1955 - 8 Cyl. - 3 3/4 Bore

Chain 347 60 LINKS74 301-W ENG - 1978-81 - 8 Cyl. - 4.000 Bore


75 301-Y ENG - 1977-79 - 8 Cyl. - 4.000 Bore3pc Set 3-365S INCLUDES [365], [S494] & [S495]Chain 365 60 LINKSCam Sprocket S494 42 TEETHCrank Sprocket S495 21 TEETH

76 4.9-T (301) ENG - 1980-81 - 8 Cyl. - 4.000 Bore (TURBO)3pc Set 3-365S INCLUDES [365], [S494] & [S495]Chain 365 60 LINKSCam Sprocket S494 42 TEETHCrank Sprocket S495 21 TEETH

77 5.0 (305) ENG - 1977-92 - 8 Cyl. - 3.736 Bore (1988-92 5.0-E) (1985-92 5.0-F) (1984-86 5.0-G)(1977-87 5.0-H) (1983 5.0-S) (1982-83 5.0-7)3pc Set 3-163S 1977-1986 INCLUDES [163], [S288] & [S289] HEAVY DUTY



Cam Sprocket S288 1977-1986 44 TEETH HEAVY DUTYS390 1977-1986 36 TEETH STANDARD DUTY


217


77 5.0 (305) ENG - 1977-92 - 8 Cyl. - 3.736 Bore (1988-92 5.0-E) (1985-92 5.0-F) (1984-86 5.0-G)(1977-87 5.0-H) (1983 5.0-S) (1982-83 5.0-7) (Continued)Cam Sprocket S732 1987-1992 36 TEETH STANDARD DUTYCrank Sprocket S289 1977-1986 22 TEETH HEAVY DUTY

S391 18 TEETH STANDARD DUTY78 307 ENG - 1971-72 - 8 Cyl. - 3 7/8 Bore (CHEVROLET)

3pc Set 3-163S INCLUDES [163], [S288] & [S289] H.D.3-499S INCLUDES [499], [S390] & [S391]


Cam Sprocket S288 44 TEETH H.D.S390 36 TEETH

Crank Sprocket S289 22 TEETH H.D.S391 18 TEETH

79 5.0-Y (307) OHV ENG - 1986-89 - 8 Cyl. - 3.800 Bore (1986 PARISIENNE) (1987-89 SAFARI)3pc Set 3-498SC INCLUDES [498], [S348] & [S349]Chain 498 48 LINKSCam Sprocket S348 36 TEETHCrank Sprocket S349 18 TEETH

80 5.0-Y (307) OHV ENG - 1981 - 8 Cyl. - 3.800 Bore (BONNEVILLE, CATALINA) OLDS ENG.3pc Set 3-498SC INCLUDES [498], [S348] & [S349]Chain 498 48 LINKSCam Sprocket S348 36 TEETHCrank Sprocket S349 18 TEETH


82 5.3-C (325) OHV ENG - 2005-08 - 8 Cyl. - 3.78 Bore (GEN IV LS4 GRAND PRIX GXP)3pc Set 3-3SRH60S 2008 INCLUDES [3SRH60], [S894] & [S827]; FOR USE W/SINGLE

BOLT CAMSHAFT3-3SRH60SA 2005-2007 INCLUDES [3SRH60], [S878] & [S827]; FOR USE W/3

BOLT CAMSHAFTChain 3SRH60 60 LINKSCam Sprocket S878 2005-2007 44 TEETH; FOR USE W/3BOLT CAMSHAFT

S894 2008 44 TEETH; FOR USE W/SINGLE BOLT CAMCrank Sprocket S827 22 TEETH 22 TEETHDamper BD417

83 326 ENG - 1963-67 - 8 Cyl. - 3.72 Bore3pc Set 3-350S INCLUDES [350], [S305] & [S371]Chain 350 60 LINKS



86 350 ENG - 1972-76 - 8 Cyl. - 3.88 Bore (EXC. 1975 VENTURA)3pc Set 3-350S INCLUDES [350], [S305] & [S371]Chain 350 60 LINKS

87 350-X OHV ENG - 1978-80 - 8 Cyl. - 3.80 Bore (1978-80 BONNEVILLE) (1978-80 CATALINA) BUICKENG.3pc Set 3-359S INCLUDES [359], [S334] & [S323]Chain 359 54 LINKSCam Sprocket S334 40 TEETHContinued on Next Page

218


87 350-X OHV ENG - 1978-80 - 8 Cyl. - 3.80 Bore (1978-80 BONNEVILLE) (1978-80 CATALINA) BUICKENG. (Continued)Crank Sprocket S323 20 TEETHDamper BD44 RIGHT HAND W/SPRING

BD45 LEFT HAND88 350-H,J OHV ENG - 1975-76 - 8 Cyl. - 3.88 Bore (1975 GRAND AM, GRAND LEMANS, LEMANS)

(1975-76 VENTURA)3pc Set 3-359S INCLUDES [359], [S334] & [S323]Chain 359 54 LINKSCam Sprocket S334 40 TEETHCrank Sprocket S323 20 TEETHDamper BD44 RIGHT HAND W/SPRING

BD45 LEFT HAND89 350-L ENG - 1977-79 - 8 Cyl. - 4.000 Bore (CHEVROLET)





90 350-P OHV ENG - 1976-77 - 8 Cyl. - 3.88 Bore (OLDSMOBILE ENG.)3pc Set 3-350S INCLUDES [350], [S305] & [S371]Chain 350 60 LINKS

91 350-R ENG - 1977-80 - 8 Cyl. - 4.06 Bore (OLDS ENG)3pc Set 3-498SC INCLUDES [498], [S348] & [S349]Chain 498 48 LINKSCam Sprocket S348 36 TEETHCrank Sprocket S349 18 TEETH

92 5.7 (350N) ENG - 1980-85 - 8 Cyl. - 4.00 Bore (OLDSMOBILE-DIESEL)Chain 180 48 LINKSCrank Sprocket S503 18 TEETH

93 5.7-8 (350) ENG - 1987-92 - 8 Cyl. - 4.000 Bore3pc Set 3-506SC 1987-1991 INCLUDES [499], [S732] & [S391]

3-506SE 1992 INCLUDES [499], [S732], [S797]Chain 499 46 LINKSCam Sprocket S732 36 TEETHCrank Sprocket S391 1987-1991 18 TEETH

S797 1992 18 TEETH94 5.7-G (350) OHV ENG - 1998-02 - 8 Cyl. - 3.90 Bore (GEN III LS1 FIREBIRD)

3pc Set 3-3SRH60SA INCLUDES [3SRH60], [S878] & [S827]; FOR USE W/3 BOLTCAMSHAFT

Chain 3SRH60 60 LINKSCam Sprocket S878 44 TEETH; FOR USE W/3BOLT CAMSHAFTCrank Sprocket S827 22 TEETH 22 TEETHChain Damper AdapterBracket



219


94 5.7-G (350) OHV ENG - 1998-02 - 8 Cyl. - 3.90 Bore (GEN III LS1 FIREBIRD) (Continued)Chain Damper AdapterBracket


95 5.7-P (350) ENG - 1993-97 - 8 Cyl. - 4.000 Bore (FIREBIRD,FORMULA,TRANS AM) LT13pc Set 3-509SA 1995-1997 INCLUDES [499], [S797], [S814]

3-509SB 1993-1994 INCLUDES [499], [S797], [S742]Chain 499 46 LINKSCam Sprocket S742 1993-1994 36 TEETH

S814 1995-1997 36 TEETHCrank Sprocket S797 18 TEETH

96 5.7 (350) OHV ENG - 2004 - 8 Cyl - 3.90 Bore (GEN III LS1 GTO)3pc Set 3-3SRH60SA INCLUDES [3SRH60], [S878] & [S827]; FOR USE W/3 BOLT

CAMSHAFTChain 3SRH60 60 LINKSCam Sprocket S878 44 TEETH; FOR USE W/3BOLT CAMSHAFTCrank Sprocket S827 22 TEETH 22 TEETH

97 6.0-U (364) OHV ENG - 2005-06 - 8 Cyl. - 4.00 Bore (GEN IV LS2 GTO) VORTEC3pc Set 3-3SRH60SA INCLUDES [3SRH60], [S878] & [S827]; FOR USE W/3 BOLT

CAMSHAFTChain 3SRH60 60 LINKSCam Sprocket S878 44 TEETH; FOR USE W/3BOLT CAMSHAFTCrank Sprocket S827 22 TEETH 22 TEETHChain Damper AdapterBracket



98 6.0-Y (364) OHV ENG - 2008-09 - 8 Cyl. - 4.00 Bore (G8 GEN IV L76) VORTEC3pc Set 3-3SRH60S INCLUDES [3SRH60], [S894] & [S827]; FOR USE W/SINGLE

BOLT CAMSHAFTChain 3SRH60 60 LINKSCam Sprocket S894 44 TEETH; FOR USE W/SINGLE BOLT CAMCrank Sprocket S827 22 TEETH 22 TEETH

99 6.1 (370) OHV ENG - 1958 - 8 Cyl. - 4.06 BoreChain 339 60 LINKS

100 6.2-W (376) OHV ENG - 2009 - 8 Cyl. - 4.06 Bore G8 (GEN IV LS3 ENG)3pc Set 3-3SRH60S INCLUDES [3SRH60], [S894] & [S827]; FOR USE W/SINGLE

BOLT CAMSHAFT SINGLE BOLT CAM; W/4 SENSORSChain 3SRH60 60 LINKSCam Sprocket S894 44 TEETH; FOR USE W/SINGLE BOLT CAMCrank Sprocket S827 22 TEETH 22 TEETHDamper BD417

101 389 ENG - 1959-66 - 8 Cyl. - 4 1/16 Bore3pc Set 3-350S INCLUDES [350], [S305] & [S371]Chain 350 60 LINKS


220



104 400 ENG - 1972 - 8 Cyl. - 4.12 Bore3pc Set 3-350S INCLUDES [350], [S305] & [S371]Chain 350 60 LINKS







111 421 ENG - 1963-66 - 8 Cyl. - 4 3/32 Bore3pc Set 3-350S INCLUDES [350], [S305] & [S371]Chain 350 60 LINKS


113 455 OHV ENG - 1970-76 - 8 Cyl. - 4.15 Bore3pc Set 3-350S INCLUDES [350], [S305] & [S371]Chain 350 60 LINKS

PORSCHEEngine Year Line Engine Year Line Engine Year Line

4 Cyl.1983CC 2.0 SOHC 1977-82 16 Cyl.2341CC 2.4 SOHC 1972-73 24 Cyl.2475CC 2.5 DOHC 1987-88 32475CC 2.5 SOHC 1983-88 4

6 Cyl.2688CC 2.7 SOHC 1974-77 54 Cyl.2688CC 2.7 SOHC 1989 62983CC 3.0 DOHC 1990-95 72999CC 3.0 DOHC 1989 86 Cyl.2999CC 3.0 SOHC 1976-83 9

6 Cyl. (Continued)

3163CC 3.2 SOHC 1984-89 103294CC 3.3 SOHC 1978-79 113294CC 3.3 SOHC 1986-89 123294CC 3.3 SOHC 1991-92 133606CC 3.6 SOHC 1989-98 14


1 1983CC 2.0 SOHC ENG - 1976-82 - 4 Cyl. - 86.5 MM Bore (924)Belt B-017 121 TEETHBelt Tensioner BT148

221

PORSCHE (Continued)LineNo. Part Title Part No Description

2 2341CC 2.4 SOHC ENG - 1972-73 - 6 Cyl. - 84 MM Bore (911T,911E,911S)Chain 3DR98 1972-1973 98 LINKS BOTH RIGHT & LEFT HAND

3 2475CC 2.5 DOHC ENG - 1987-88 - 4 Cyl. - 100 MM Bore (944S)Belt B-0152 119 TEETH

4 2475CC 2.5 SOHC ENG - 1983-88 - 4 Cyl. - 100 MM Bore (924 & 944)Belt B-0107 1983-1988 117 TEETH CAMSHAFT

B-0108 1983-1988 110 TEETH BAL. SHAFT5 2688CC 2.7 SOHC ENG - 1974-77 - 6 Cyl. - 90 MM Bore (911,911S & CARRERA)

Chain 3DR98 1974-1977 98 LINKS BOTH RIGHT & LEFT HAND6 2688CC 2.7 SOHC ENG - 1989 - 4 Cyl. - 104 MM Bore (944)

Belt B-0107 117 TEETH7 2983CC 3.0 DOHC ENG - 1990-95 - 4 Cyl. - 104 MM Bore (944,968)

Belt B-0152 1990-1995 119 TEETH CAMSHAFT8 2999CC 3.0 DOHC ENG - 1989 - 4 Cyl. - 104 MM Bore (944S2)

Belt B-0108 1989 110 TEETH BAL. SHAFTB-0152 1989 119 TEETH CAMSHAFT

9 2999CC 3.0 SOHC ENG - 1976-83 - 6 Cyl. - 95 MM Bore (911SC & 911 TURBO CARRERA)Chain 3DR98 1976-1983 98 LINKS BOTH RIGHT & LEFT HAND

10 3163CC 3.2 SOHC ENG - 1984-89 - 6 Cyl. - 95 MM Bore (911 CARRERA, 911 SPEEDSTER)Chain 3DR98 1984-1989 98 LINKS BOTH RIGHT & LEFT HAND

11 3294CC 3.3 SOHC ENG - 1978-79 - 6 Cyl. - 97 MM Bore (930 TURBO,TURBO COUPE)Chain 3DR98 1978-1979 98 LINKS BOTH RIGHT & LEFT HAND

12 3294CC 3.3 SOHC ENG - 1986-89 - 6 Cyl. - 97 MM Bore (911 TURBO CARRERA)Chain 3DR98 1986-1989 98 LINKS BOTH RIGHT & LEFT HAND

13 3294CC 3.3 SOHC ENG - 1991-92 - 6 Cyl. - 97 MM Bore (911 TURBO)Chain 3DR98 98 LINKS RIGHT AND LEFT

14 3606CC 3.6 SOHC ENG - 1989-98 - 6 Cyl. - 100 MM Bore (911 CARRERA)Chain 3DR98 1989-1998 98 LINKS BOTH RIGHT & LEFT HAND

RENAULTEngine Year Line Engine Year Line Engine Year Line

4 Cyl.747CC 1966-77 1782CC 1966-77 2845CC 1966-67 3956CC 1963-66 4

4 Cyl. (Continued)

1108CC OHV 1964-71 51289CC OHV 1970-71 61397CC 1983-87 71565CC OHV 1969-74 8

4 Cyl. (Continued)

1565CC OHV 1983-84 91647CC OHV 1973-79 101967CC OHC 1987 112152CC OHC 1984-86 12


1 747CC ENG - 1966-77 - 4 Cyl. -Chain 3SR64 64 LINKS

2 782CC ENG - 1966-77 - 4 Cyl. -Chain 3SR64 64 LINKS

3 845CC OHV ENG - 1966-67 - 4 Cyl. - 58.0 MM Bore (DAUPHINE)Chain 3SR64 64 LINKS

4 956CC ENG - 1963-66 - 4 Cyl. - 65.0 MM Bore (R-8,CARAVELLE)Chain 3SR58 58 LINKS

5 1108CC OHV ENG - 1964-71 - 4 Cyl. - 70 MM Bore (CARAVELLE S,R-8 & R-10)Chain 3SR58 58 LINKS

6 1289CC OHV ENG - 1970-71 - 4 Cyl. - 73.0 MM Bore (R-10)Chain 3SR58 58 LINKS

222

RENAULT (Continued)LineNo. Part Title Part No Description

7 1397CC ENG - 1983-87 - 4 Cyl. - 76 MM Bore (ENCORE,ALLIANCE)Chain 3SR58 58 LINKS

8 1565CC OHV ENG - 1969-74 - 4 Cyl. - 77.0 MM Bore (R12,R15,R16,R17)Chain 3DR72 72 LINKS

9 1565CC OHV ENG - 1983-84 - 4 Cyl. - 77.0 MM Bore (FUEGO TURBO)Chain 3DR72 72 LINKS

10 1647CC OHV ENG - 1973-79 - 4 Cyl. - 79.0 MM Bore (1973-77 R-12, 1973-76 R-15, 1973-79 R-17)Chain 3DR72 72 LINKS

11 1967CC OHC ENG - 1987 - 4 Cyl. - 82 MM Bore (ALLIANCE GTA)Belt B-0140 118 TEETH

12 2152CC OHC ENG - 1984-86 - 4 Cyl. - 86 MM Bore (FUEGO 1984-85 & R18I 1984-86)Belt B-0111 116 TEETH

ROVEREngine Year Line Engine Year Line Engine Year Line

4 Cyl.1978CC OHC 1964-71 11996CC OHV 1952-57 2

4 Cyl. (Continued)

2286CC OHV 1958-73 36 Cyl.2625CC OHV 1963-72 42995CC OHV 1959-68 5


1 1978CC OHC ENG - 1964-71 - 4 Cyl. - 3.375 Bore (2000, 2000SC & 2000TC)Chain 3DR74 1964-1971 74 LINKS LOWER

3DR78 1964-1971 78 LINKS UPPER2 1996CC OHV ENG - 1952-57 - 4 Cyl. - 3.063 Bore (LANDROVER BASE)

Chain 3DR78 78 LINKS3 2286CC OHV ENG - 1958-73 - 4 Cyl. - 3.563 Bore (LANDROVER SERIES II & IIA)

Chain 3DR78 78 LINKS4 2625CC OHV ENG - 1963-72 - 6 Cyl. - 3.062 Bore (LANDROVER SERIES IIA & IIB)

Chain 3DR78 78 LINKS5 2995CC OHV ENG - 1959-68 - 6 Cyl. - 3.062 Bore (MK.I, MK.II & MK.III CANADA ONLY)

Chain 3DR78 78 LINKS

SAABEngine Year Line Engine Year Line Engine Year Line

4 Cyl.2.0 (1985CC) SOHC 1975-80 12.0 (1985CC) SOHC 1986-88 22.0 (1998) DOHC 2001-08 3

6 Cyl.4.2-S (256) DOHC 2005-09 48 Cyl.5.3-M (325) OHV 2005-09 5

8 Cyl. (Continued)

6.0-H (364) OHV 2008-09 6


1 2.0 (1985CC) SOHC ENG - 1975-80 - 4 Cyl. - 90.0 MM Bore (1975-80 MODEL 99) (1979-80 MODEL900) (1978 MODEL 99 TURBO)Chain 3DR114 114 LINKS

2 2.0 (1985CC) SOHC ENG - 1986-88 - 4 Cyl. - 90.0 MM Bore (1986-88 MODEL 900) (1986 900S) B201IChain 3DR114 114 LINKS

3 2.0 (1998) DOHC ENG. - 2001-08 - 4 Cyl. - 86.0 MM Bore (9-3) TURBOCHARGED ECOTEC MEXICOONLYChain 4202F 2003-2008 134 LINKS BALANCE SHAFT CHAINWater Pump Sprocket S911 2003-2008 40 TEETHChain Tensioner BT5383 2003-2008 BALANCE SHAFT CHAIN TENSIONER

BT5481 2003-2008 NEW DESIGN W/10.0mm DIA. PLUNGER; 82.0mmO.A.L CAMSHAFT CHAIN TENSIONER


223

SAAB (Continued)LineNo. Part Title Part No Description

3 2.0 (1998) DOHC ENG. - 2001-08 - 4 Cyl. - 86.0 MM Bore (9-3) TURBOCHARGED ECOTEC MEXICOONLY (Continued)Chain Guide BG5375 2003-2008 CAMSHAFT CHAIN GUIDE; RIGHT HAND LOWER

BG5381 2003-2008 CAMSHAFT CHAIN GUIDE; LEFT HAND LOWERBG5382 2003-2008 CAMSHAFT CHAIN GUIDE; UPPERBG5384 2003-2008 BALANCE SHAFT CHAIN GUIDE; LOWERBG5385 2003-2008 BALANCE SHAFT CHAIN GUIDE; UPPER RIGHT

HANDBG5386 2003-2008 BALANCE SHAFT CHAIN GUIDE; UPPER LEFT HAND

4 4.2-S (256) DOHC ENG - 2005-09 - 6 Cyl. - 3.66 Bore (9-7x, 4.2i TRUCK) GM VORTEC ENGINETiming Kit 3-195S 2005-2007 INCLUDES [195], [S908A], [S913], [BT5512], [BG5504],

[BG5506], [BG6006]3-195SB 2008-2009 INCLUDES [195], [S908A], [S913], [BT5512], [BG5504],

[BG5510], [BG6006]Chain 195 168 LINKSCam Sprocket S908A 58 TEETHCrank Sprocket S913 29 TEETHChain Tensioner BT5512Chain Guide BG5504 RIGHT HAND

BG5506 2005-2007 LEFT HANDBG5510 2008-2009 LEFT HANDBG6006 2005-2007 UPPER

5 5.3-M (325) OHV ENG - 2005-09 - 8 Cyl. - 3.78 Bore (9-7x TRUCK) GM VORTEC ENGINE3pc Set 3-3SRH60S 2008-2009 INCLUDES [3SRH60], [S894] & [S827]; FOR USE

W/SINGLE BOLT CAMSHAFT3-3SRH60SA 2005-2007 INCLUDES [3SRH60], [S878] & [S827]; FOR USE W/3

BOLT CAMSHAFTChain 3SRH60 60 LINKSCam Sprocket S878 2005-2007 44 TEETH; FOR USE W/3BOLT CAMSHAFT

S894 2008-2009 44 TEETH; FOR USE W/SINGLE BOLT CAMCrank Sprocket S827 22 TEETH 22 TEETHChain Tensioner BT5490 2008-2009Damper BD417 2005-2007

6 6.0-H (364) OHV ENG - 2008-09 - 8 Cyl. - 4.00 Bore (9-7x AERO TRUCK) GM VORTEC ENGINE3pc Set 3-3SRH60S INCLUDES [3SRH60], [S894] & [S827]; FOR USE W/SINGLE

BOLT CAMSHAFTChain 3SRH60 60 LINKSCam Sprocket S894 44 TEETH; FOR USE W/SINGLE BOLT CAMCrank Sprocket S827 22 TEETH 22 TEETHChain Tensioner BT5490

SATURN


1 1.9-7 (116) DOHC ENG - 1991-02 - 4 Cyl. - 3.23 Bore

Engine Year Line Engine Year Line Engine Year Line4 Cyl.1.9-7 (116) DOHC 1991-02 11.9-8,9 (116) SOHC 1991-02 22.0-P,X (122) DOHC 2004-10 32.2-D,F (134) DOHC 2000-07 42.4-B,P,Z,5 (145) DOHC 2006-10 5

6 Cyl.3.0-R (181) DOHC 2000-05 63.5-4 (3474,3475CC)SOHC

2004-05 7

3.5-4 (3471CC) SOHC 2006-07 83.5-L (213) OHV 2005-06 9

6 Cyl. (Continued)

3.5-N (213) OHV 2007-10 103.6-7,D (217) DOHC 2007-10 113.9-1,W (237) OHV ENG 2006-07 12

Timing Kit 3-192S 1991-1998 KIT INCLUDES [192], [S773], (2) [S786], [BG328],[BG329], [BG330], [BT327]


224

SATURN (Continued)LineNo. Part Title Part No Description

1 1.9-7 (116) DOHC ENG - 1991-02 - 4 Cyl. - 3.23 Bore (Continued)3pc Set 3-192SA 1991-1998 INCLUDES [192], (2) [S786], [S773]Chain 192 1991-1998 126 LINKSCam Sprocket S786 1991-1998 38 TEETH (2) REQ.Crank Sprocket S773 1991-1998 19 TEETHChain Tensioner BT327 1991-1998 HYD.

BT5412 1999-2002Chain Guide BG328 1991-1998 RIGHT HAND

BG329 1991-1998 LEFT HANDBG330 1991-1998 UPPERBG5415 1999-2002 RIGHT HANDBG5416 1999-2002 LEFT HAND

2 1.9-8,9 (116) SOHC ENG - 1991-02 - 4 Cyl. - 3.23 BoreTiming Kit 3-3SR92 1991-1998 KIT INCLUDES [3SR92], [S773], [S786], [BG332],

[BG331], [BT327]3pc Set 3-3SR92A 1991-1998 INCLUDES [3SR92], [S786], [S773]Chain 3SR92 1991-1998 92 LINKSCam Sprocket S786 1991-1998 38 TEETHCrank Sprocket S773 1991-1998 19 TEETHChain Tensioner BT327 1991-1998 HYD.

BT5412 1999-2002Chain Guide BG331 1991-1998 RIGHT HAND

BG332 1991-1998 LEFT HANDBG5413 1999-2002 LEFT HANDBG5414 1999-2002 RIGHT HAND

3 2.0-P,X (122) DOHC ENG - 2004-10 - 4 Cyl. - 3.39 Bore (VIN P ION SUPERCHARGED, VIN X SKYTURBOCHARGED) (ECOTEC)Timing Kit 3-4201SX KIT INCLUDES [4201F], [BT5481], [BG5375], [BG5381], [BG5382],

[5467N] (DOES NOT INCLUDE SPROCKETS) TIMING CHAIN KITOil Jet Nozzle 5467NChain 4201F 148 LINKS CAMSHAFT CHAIN

4202F 134 LINKS BALANCE SHAFT CHAINCam Sprocket S850 2004-2007 46 TEETH EXH. ION ONLY (SKY REQUIRES

ACTUATORS)S850 2004-2007 46 TEETH INT. ION ONLY (SKY REQUIRES

ACTUATORS)Crank Sprocket S849 23 TEETH OUTER SPROCKET

S851 42 TEETH SKY ONLY; INNER SPROCKETBalance Shaft Sprocket S853 2004-2007 21 TEETH ION ONLY; LEFT HAND; INTAKE

S855 2004-2007 21 TEETH ION ONLY; RIGHT HAND; EXHAUSTWater Pump Sprocket S911 40 TEETH SKY ONLYChain Tensioner BT5383 BALANCE SHAFT CHAIN TENSIONER; LOWER



225


4 2.2-D,F (134) DOHC ENG - 2000-07 - 4 Cyl. - 3.39 Bore (L61 ENG ECOTEC) (L SERIES,LWSERIES,LS SERIES,ION,VUE) INCLUDES TRUCKSTiming Kit 3-4201S KIT INCLUDES [4201F], (2) [S850], [S849], [BT5481], [BG5375],




Oil Jet Nozzle 5467NCamshaft Bolt 5496B TORQUE TO YIELD BOLT 2 REQ.Chain 4201F 148 LINKS CAMSHAFT CHAIN

4202F 134 LINKS BALANCE SHAFT CHAINCam Sprocket S850 46 TEETH 2 REQ.Crank Sprocket S849 23 TEETH OUTER SPROCKET

S851 42 TEETH INNER SPROCKETBalance Shaft Sprocket S853 21 TEETH LEFT HAND; INTAKE

S855 21 TEETH RIGHT HAND; EXHAUSTWater Pump Sprocket S911 40 TEETHChain Tensioner BT5383 BALANCE SHAFT CHAIN TENSIONER; LOWER

BT5481 NEW DESIGN W/10.0mm DIA. PLUNGER; 82.0mm O.A.LCAMSHAFT CHAIN TENSIONER; UPPER


5 2.4-B,P,Z,5 (145) DOHC ENG - 2006-10 - 4 Cyl. - 3.46 Bore (AURA,ION,SKY,VUE) GAS,ELECTRICECOTEC; INCLUDES TRUCKSChain 4201F 2007-2010 148 LINKS CAMSHAFT CHAIN; AURA,VUE ONLY

4202F 2007-2010 134 LINKS BALANCE SHAFT CHAIN; AURA,VUE ONLYCrank Sprocket S849 2007-2010 23 TEETH OUTER SPROCKET; EXC. ION

S851 2007-2010 42 TEETH INNER SPROCKET; EXC. IONChain Tensioner BT5383 2007-2010 BALANCE SHAFT CHAIN TENSIONER;

AURA,SKY,VUE ONLYBT5481 2007-2010 NEW DESIGN W/10.0mm DIA. PLUNGER; 82.0mm

O.A.L CAMSHAFT CHAIN TENSIONER; UPPER; (2007 AURA,2007-10 SKY,VUE ONLY)

Chain Guide BG5375 2007-2010 CAMSHAFT CHAIN GUIDE; RIGHT HAND; AURA,VUEONLY

BG5381 2007-2010 CAMSHAFT CHAIN GUIDE; LEFT HAND; AURA,VUEONLY

BG5382 2007-2010 CAMSHAFT CHAIN GUIDE; UPPER; AURA,SKY,VUEONLY

BG5384 2007-2010 BALANCE SHAFT CHAIN GUIDE; UPPER;AURA,SKY,VUE ONLY

BG5385 2007-2010 BALANCE SHAFT CHAIN GUIDE; LEFT HAND;AURA,SKY,VUE ONLY

BG5386 2007-2010 BALANCE SHAFT CHAIN GUIDE; RIGHT HAND;AURA,SKY,VUE ONLY

226


6 3.0 (181) DOHC ENG - 2000-05 - 6 Cyl. - 3.39 Bore (LS2,LW2,L300,LW300,VUE) ECOTECBelt B-0285 225 TEETH

7 3.5-4 (3474,3475CC) SOHC ENG - 2004-05 - 6 Cyl - 3.50, 3.54 Bore (VUE) HONDA ENG. NON VTECBelt B-0329 197 TEETH INTERFERENCE ENGINE APPLICATION

8 3.5-4 (3471CC) SOHC ENG - 2006-07 - 6 Cyl. - 3.54 Bore (VUE) VTECBelt B-0329 197 TEETH INTERFERENCE ENGINE APPLICATION

9 3.5-L (213) OHV ENG - 2005-06 - 6 Cyl - 3.70 Bore (RELAY-2, RELAY-3)Timing Kit 3-700SB KIT INCLUDES [700], [S847], [S848], [BD600]3pc Set 3-700S INCLUDES [700], [S847], [S848]Chain 700 80 LINKSCam Sprocket S848 50 TEETHCrank Sprocket S847 25 TEETHDamper BD600

10 3.5-N (213) OHV ENG - 2007-10 - 6 Cyl - 3.90 Bore (AURA & VUE)Chain 700 80 LINKSCrank Sprocket S847 25 TEETH

11 3.6-7,D (217) DOHC ENG - 2007-10 - 6 Cyl. - 3.70 Bore (2007-09 AURA) (2007-10 OUTLOOK)(2008-10 VUE)Timing Kit 3-753S 2007-2009 INCLUDES [753], (2) [754], [S921], [S930], [S932],

[BT5535], [BT5536], [BT5537], [BG5548], [BG5530], [BG5531],[BG5532], [BG5533], [BG5534] FOR ENGINES USING SILENTTYPE CHAINS






PRIMARY CHAINChain Guide BG5530 INCLUDES (2) MOUNTING BOLTS PRIMARY CHAIN; UPPER;

EXC. 2010 VUEBG5531 2007-2009 INCLUDES 2 MOUNTING BOLTS SECONDARY

CHAIN; LEFT HANDBG5532 INCLUDES 2 MOUNTING BOLTS SECONDARY CHAIN; RIGHT

HAND; EXC. 2010 VUEBG5533 PRIMARY CHAIN; RIGHT HAND; EXC. 2010 VUEBG5534 PRIMARY CHAIN; LEFT HAND; LOWER EXC. 2010 VUEBG5548 2007-2009 PRIMARY CHAIN; RIGHT HAND; LOWER

12 3.9-1,W (237) OHV ENG - 2006-07 - 6 Cyl. - 3.90 Bore (RELAY) GAS, FLEX FUELTiming Kit 3-700SB KIT INCLUDES [700], [S847], [S848], [BD600]3pc Set 3-700S INCLUDES [700], [S847], [S848]Chain 700 80 LINKSCam Sprocket S848 50 TEETHCrank Sprocket S847 25 TEETHDamper BD600

227

SCIONEngine Year Line Engine Year Line Engine Year Line

4 Cyl.1.5 (1497CC) 1NZFEDOHC

2004-06 14 Cyl. (Continued)

2.4 (2362,2398CC) 2AZFEDOHC

2005-13 2


1 1.5 (1497CC) 1NZFE DOHC ENG - 2004-06 - 4 Cyl. - 75.0 MM Bore (xA, xB) TOYOTA VVTi ENGTiming Kit 3-4214SA KIT INCLUDES [4214C], [S846], [BG5564], [BT5565], [BT5566],

(DOES NOT INCLUDE INTAKE CAMSHAFT ACTUATOR ORCRANK SPROCKET)

Chain 4214C 124 LINKSCam Sprocket S846 2004-2006 86 TEETH EXH.Chain Tensioner BT5565 TENSIONER

BT5566 TENSIONER ARMChain Guide BG5564 LEFT HAND

2 2.4 (2362,2398CC) 2AZFE DOHC ENG - 2005-13 - 4 Cyl. - 88.5 MM Bore (tC,xB) TOYOTA ENGTiming Kit 3-752S 2005-2012 SOLD AS KIT ONLY; KIT INCLUDES (2) CHAINS,(1)


STUDEBAKEREngine Year Line Engine Year Line Engine Year Line

6 Cyl.194 1965-66 1230 1966 2

8 Cyl.283 1965-66 3




2 230 ENG - 1966 - 6 Cyl. - 3 7/8 Bore (COMMANDER, CRUISER, DAYTONA, WAGONAIRE)Gear Set 2525S INCLUDES [2524] & [2501]Cam Gear 2524 54 TEETH ALUMINUM


3 283 ENG - 1965-66 - 8 Cyl. - 3 7/8 Bore3pc Set 3-489S INCLUDES [505],[S261] & [S262]Chain 505 46 LINKSCam Sprocket S261 36 TEETHCrank Sprocket S262 18 TEETH

SUBARU


1 1.2-7,8 (1189CC) SOHC ENG - 1987-95 - 3 Cyl. - 78 MM Bore (JUSTY) (EF12 ENG.)

Engine Year Line Engine Year Line Engine Year Line3 Cyl.1.2-7,8 (1189CC) SOHC 1987-95 14 Cyl.1.8 (1781CC) SOHC 1985-94 21.8 (1781CC) SOHC 1993-97 3

4 Cyl. (Continued)

2.2 (2212CC) SOHC 1990-01 42.5 (2458CC) SOHC 1999-12 52.5 (2458CC) DOHC 1996-99 6

6 Cyl.2.7 (2672CC) SOHC 1989-91 73.3 3318CC DOHC 1992-97 8

Chain 8MMSR70 70 LINKS BALANCE SHAFT CHAINContinued on Next Page

228

SUBARU (Continued)LineNo. Part Title Part No Description

1 1.2-7,8 (1189CC) SOHC ENG - 1987-95 - 3 Cyl. - 78 MM Bore (JUSTY) (EF12 ENG.) (Continued)Belt B-0135 89 TEETH CAMSHAFT BELT

2 1.8 (1781CC) SOHC ENG - 1985-94 - 4 Cyl. - 92 MM Bore (DL,GL,LOYALE,RX,XT) (8V EA82 ENG.)Belt B-0299 119 TEETH #2; LEFT HAND

B-0300 98 TEETH #1; RIGHT HANDCam Sprocket S674 36 TEETH 2 REQUIREDCrank Sprocket S669 18 TEETH INNER

S673 18 TEETH OUTERIdler Sprocket S675 18 TEETHBelt Tensioner BT140 1985-1994 #1; RIGHT HAND

BT141 #2; LEFT HAND3 1.8 (1781CC) SOHC ENG - 1993-97 - 4 Cyl. - 87.9 MM Bore (IMPREZA) (16V EJ18 ENG)

Belt B-0172 211 TEETH EXC. CALIF. EMISSIONSB-0254 211 TEETH W/CALIF. EMISSIONS

4 2.2 (2212CC) SOHC ENG - 1990-01 - 4 Cyl. - 96.9 MM Bore (IMPREZA,LEGACY) (EJ22E,EJ22T ENG)Belt B-0172 1990-1993 211 TEETH

B-0172 1994-1998 211 TEETH EXC. CALIF. EMISSIONSB-0254 1994-1998 211 TEETH W/CALIF. EMISSIONSB-0304 1999-2001 211 TEETH

5 2.5 (2458CC) SOHC ENG - 1999-12- 4 Cyl. - 99.5 MM Bore(BAJA,FORESTER,IMPREZA,LEGACY,OUTBACK) 16V (EJ251,EJ252,EJ253,EJ259)Belt B-0307 2000-2008 223 TEETH LEGACY, OUTBACK

6 2.5 (2458CC) DOHC ENG - 1996-99 - 4 Cyl. - 99.5 MM Bore (LEGACY, FORESTER, IMPREZA)(EJ25D ENG)Belt B-0277 1996-1998 281 TEETH

B-0304 1999 211 TEETH7 2.7 (2672CC) SOHC ENG - 1989-91 - 6 Cyl. - 92 MM Bore (XT) (ER27 ENG)

Belt B-0150 118 TEETH #1; RIGHT HANDB-0151 139 TEETH #2; LEFT HAND

8 3.3 (3318CC) DOHC ENG - 1992-97 - 6 Cyl. - 96.9 MM Bore (SVX COUPE) EG33D ENGBelt Tensioner BT5280Idler BT5281

SUZUKIEngine Year Line Engine Year Line Engine Year Line

4 Cyl.1.3-3 (1298CC) DOHC 1989-94 11.3-3 (1298CC) SOHC 1989-97 21.3-5 (1325CC) SOHC 1986-89 31.6 (1590CC) SOHC 1990-02 4

4 Cyl. (Continued)

1.6 (1590CC) SOHC 1989-95 51.8 (1790CC) DOHC 1999-02 61.8-2 1840CC DOHC 1996-98 72.0 (1995CC) DOHC 2007-12 8

4 Cyl. (Continued)

2.0 (2000CC) DOHC 1999-03 92.5 (2500CC) DOHC 2009-12 106 Cyl.3.6 (3564CC) DOHC 2007-09 11


1 1.3-3 (1298CC) DOHC ENG - 1989-94 - 4 Cyl. - 74 MM Bore (SWIFT GT) (16 VALVE)Belt B-0171 119 TEETH

2 1.3 (1298CC) SOHC ENG - 1989-97 - 4 Cyl. - 74 MM Bore (SWIFT, SAMURAI) 8V G13BA ENGBelt B-0272 1995-1997 89 TEETH SWIFT

B-095 1989-1993 89 TEETH SWIFTB-095 1990-1995 89 TEETH SAMURAI

3 1.3-5 (1325CC) SOHC ENG - 1986-89 - 4 Cyl. - 74.0 MM Bore (SAMURAI, SIDEKICK)Belt B-095 89 TEETH

229

SUZUKI (Continued)LineNo. Part Title Part No Description

4 1.6 (1590CC) SOHC ENG - 1990-02 - 4 Cyl. - 75.2 MM Bore (SIDEKICK 1990-98) (X-90 1996-98)(ESTEEM 1995-01) (VITARA 1999-02) (NOT PRODUCED IN 1991)Belt B-0212 1990-2001 103 TEETH

5 1.6 (1590CC) SOHC ENG - 1989-95 - 4 Cyl. - 75.2 MM Bore (SIDEKICK-8 VALVE ENG)Belt B-0164 95 TEETHBelt Tensioner BT139

6 1.8 (1790CC) DOHC ENG - 1999-02 - 4 Cyl. - 84 MM Bore (ESTEEM)Timing Kit 3-4198S SOLD AS KIT ONLY; KIT INCLUDES (2) CHAINS,(3)

TENSIONERS,(2) GUIDES,(2) CAM SPROCKETS,(1) CRANKSPROCKET, (1) IDLER SPROCKET, (1) SEAL, (1) GASKET

7 1.8-2 (1840CC) DOHC ENG - 1996-98 - 4 Cyl. - 78 MM Bore (SIDEKICK SPORT)Timing Kit 3-4198S SOLD AS KIT ONLY; KIT INCLUDES (2) CHAINS,(3)


8 2.0 (1995CC) DOHC ENG - 2007-12 - 4 Cyl. - 84.0 MM Bore (SX4) J20B SUZUKI ENG.Timing Kit 3-4198S 2007-2010 SOLD AS KIT ONLY; KIT INCLUDES (2) CHAINS,(3)


9 2.0 (2000CC) DOHC ENG - 1999-03 - 4 Cyl. - 84.1 MM Bore (AERIO 2000-03,VITARA) J20A ENGTiming Kit 3-4198S SOLD AS KIT ONLY; KIT INCLUDES (2) CHAINS,(3)


10 2.5 (2500CC) DOHC ENG - 2009-12 - 4 Cyl. - 89.0 MM Bore (EQUATOR) QR25DE NISSAN ENGTiming Kit 3-4212SA SOLD AS KIT ONLY; VARIABLE CAM SPROCKET NOT

INCLUDED; KIT INCLUDES (2) CHAINS,(2) TENSIONERS,(3)GUIDES, (1) BALANCE SHAFT GUIDE,(1) CAM SPROCKET,(1)CRANK SPROCKET, (1) BALANCE SHAFT SPROCKET, (1) SEALKIT

11 3.6 (3564CC) DOHC ENG - 2007-09 - 6 Cyl. - 94.0 MM Bore (XL7) N36A ENGTiming Kit 3-1007S 2007 KIT INCLUDES [1007], (2) [1044], [S1225], [S1227], [S1229],

[BT5535], [BT5536], [BT5537], [BG5530], [BG5531], [BG5532],[BG5533], [BG5534], [BG5548] FOR ENGINES USING ROLLERTYPE SECONDARY (UPPER) CHAINS

3-753S 2008-2009 INCLUDES [753], (2) [754], [S921], [S930], [S932],[BT5535], [BT5536], [BT5537], [BG5548], [BG5530], [BG5531],[BG5532], [BG5533], [BG5534] FOR ENGINES USING SILENTTYPE SECONDARY CHAINS

Chain 1007 2007 78 LINKS PRIMARY ROLLER TIMING CHAIN1044 2007 92 LINKS SECONDARY ROLLER TIMING CHAIN; 2 REQ.753 2008-2009 96 LINKS PRIMARY SILENT TIMING CHAIN; LOWER754 2008-2009 114 LINKS SECONDARY SILENT TIMING CHAIN;

UPPER; 2 REQ.Crank Sprocket S1229 2007 24 TEETH

S921 2008-2009 30 TEETHIdler Sprocket S1225 2007 18 / 27 TEETH LEFT HAND

S1227 2007 18 / 27 TEETH RIGHT HANDS930 2008-2009 22 TEETH INCLUDES MOUNTING BOLT LEFT HANDS932 2008-2009 22 TEETH INCLUDES MOUNTING BOLT RIGHT HAND

Chain Tensioner BT5535 INCLUDES GASKET AND 2 MOUNTING BOLTS SECONDARYCHAIN; LEFT HAND

BT5536 INCLUDES GASKET AND 2 MOUNTING BOLTS SECONDARYCHAIN; RIGHT HAND; UPPER


230

SUZUKI (Continued)LineNo. Part Title Part No Description

11 3.6 (3564CC) DOHC ENG - 2007-09 - 6 Cyl. - 94.0 MM Bore (XL7) N36A ENG (Continued)Chain Tensioner BT5537 2008-2009 INCLUDES MOUNTING GASKET AND 2 MOUNTING

BOLTS PRIMARY CHAINChain Guide BG5530 INCLUDES (2) MOUNTING BOLTS PRIMARY CHAIN; UPPER



BG5533 PRIMARY CHAIN; RIGHT HANDBG5534 PRIMARY CHAIN; LEFT HAND; LOWERBG5548 2008-2009 PRIMARY CHAIN; RIGHT HAND; LOWER

231

TOYOTAEngine Year Line Engine Year Line Engine Year Line

4 Cyl.1.1L (1077CC) KC OHV 1968-69 11.2L (1166CC) 3KC OHV 1970-79 21.3L (1290CC) 4KC OHV 1981-82 31.3L (1290CC) 4KE OHV 1983-84 41.5L (1452CC) 1AC OHC 1980 51.5L (1452CC) 3A OHC 1984-86 61.5L (1452CC) 3AC OHC 1981-88 71.5L (1456CC) 3E OHC 1987-90 81.5L (1456CC) 3EE OHC 1990-94 91.5L (1497CC) 5EFEDOHC

1992-99 10

1.5L (1497CC) 1NZFEDOHC

2000-14 11

1.6L (1587CC) 4AC SOHC 1983-87 121.6L (1587CC) 4AF DOHC 1988-89 131.6L (1587CC) 4AFEDOHC

1988-97 14

1.6L (1587CC) 4AGEDOHC

1988-91 15

1.6L (1587CC) 4AGECDOHC

1985-87 16

1.6L (1587CC) 4AGELCDOHC

1985-89 17

1.6L (1587CC) 4AGZE 1988-89 181.6L (1587CC) 4ALCSOHC

1984-88 19

1.6L (1588CC) 2TC OHV 1971-79 201.8L (1762CC) 7AFEDOHC

1993-97 21

1.8L (1770CC) 3TC OHV 1980-82 221.8L (1794CC) 1ZZFEDOHC

1998-08 23

1.8L (1795CC) 2ZZGEDOHC

2000-06 24

1.8L (1839CC) 1CLC OHC 1984-85 251.8 (1839CC) 1CTLC OHC 1984-85 261.9L (1898CC) 3RC OHV 1967-70 271.9L (1898CC) 8RC OHC 1969-71 27

4 Cyl. (Continued)

2.0L (1968CC) 18RC OHC 1972-74 282.0L (1974CC) 2CTLCOHC

1986 29

2.0L (1995CC) 2SELCOHC

1983-86 30

2.0L (1998CC) 1AZFEDOHC

2001-03 31

2.0L (1998CC) 3SFEDOHC

1987-00 32

2.0L (1998CC) 3SGELCDOHC

1986-89 33

2.0L (1998CC) 3SGTEDOHC

1988-95 34

2.0L (1998CC) 3YEC OHV 1984-85 352.2L (2164CC) 5SFEDOHC

1990-01 36

2.2L (2164CC) 5SFNEDOHC

2000-01 37

2.2L (2188CC) L OHC 1981-83 382.2L (2189CC) 20R OHC 1975-80 392.2L (2237CC) 4YEC OHV 1986-89 406 Cyl.2.3L (2253CC) 2M OHC 1972 414 Cyl.2.4L (2362CC) 2AZFEDOHC

2001-13 42

2.4L (2362CC) 2AZFXEDOHC

2007-11 43

2.4L (2366CC) 22R OHC 1981-90 442.4L (2366CC) 22RE OHC 1989-95 452.4L (2366CC) 22RECSOHC

1983-89 46

2.4L (2366CC) 22RTECOHC

1985-88 47

2.4L (2438CC) 2RZFEDOHC

1995-04 48

2.4L (2438CC) 2TZFEDOHC

1991-95 49

4 Cyl. (Continued)

2.4L (2438CC) 2TZFZEDOHC

1994-97 50

6 Cyl.2.5L (2508CC) 2VZFEDOHC

1988-91 51

2.6L (2563CC) 4M SOHC 1971-79 526 Cyl.2.6L (2563CC) 4ME OHC 1979-80 534 Cyl.2.7L (2694CC) 2TRFEDOHC

2005-13 54

2.7L (2694CC) 3RZFEDOHC

1994-04 55

6 Cyl.2.8L (2754CC) 5ME OHC 1981-82 562.8L (2754CC) 5MGEDOHC

1982-88 57

3.0L (2959CC) 3VZESOHC

1988-95 58

3.0L (2959CC) 3VZFE 1992-93 593.0L (2954CC) 7MGE,7MGTE DOHC

1986-92 60

3.0L (2995CC) 1MZFEDOHC

1994-06 61

3.0L (2997CC) 2JZGEDOHC

1993-97 62

3.4L (3378CC) 5VZFEDOHC

1995-04 63

3.5L (3456CC) 2GRFEDOHC

2005-13 64

3.9L (3878CC) F OHV 1960-74 654.0L (3956CC) 1GRFEDOHC

2003-13 66

4.2L (4227CC) 2F OHV 1975-87 67


1 1.1L (1077CC) KC OHV ENG - 1968-69 - 4 Cyl. - 75 MM Bore (COROLLA 1100)Crank Sprocket S491 18 TEETHDamper BD22

2 1.2L (1166CC) 3KC OHV ENG - 1970-79 - 4 Cyl. - 75 MM Bore (COROLLA)Crank Sprocket S491 18 TEETHDamper BD22

3 1.3L (1290CC) 4KC OHV ENG - 1981-82 - 4 Cyl. - 75 MM Bore (STARLET-KP61)Crank Sprocket S491 18 TEETHDamper BD22 1981 To 8/81

BD71 From 8/88 TO 19824 1.3L (1290CC) 4KE OHV ENG - 1983-84 - 4 Cyl. - 75 MM Bore (STARLET-KP61)

Damper BD71

232

TOYOTA (Continued)LineNo. Part Title Part No Description

5 1.5L (1452CC) 1AC OHC ENG - 1980 - 4 Cyl. - 77 MM Bore (TERCEL-AL1)Timing Kit B-070-1 KIT INCLUDES [B-070], [S560], [S551] & [BT66]Belt B-070 88 TEETHCam Sprocket S560 36 TEETHCrank Sprocket S551 18 TEETHBelt Tensioner BT66

6 1.5L (1452CC) 3A OHC ENG - 1980-86 - 4 Cyl. - 77 MM Bore (TERCEL)Timing Kit B-070-1 KIT INCLUDES [B-070], [S560], [S551] & [BT66]Belt B-070 88 TEETHCam Sprocket S560 36 TEETHCrank Sprocket S551 18 TEETHBelt Tensioner BT66

7 1.5L (1452CC) 3AC OHC ENG - 1981-88 - 4 Cyl. - 77.5 MM Bore (TERCEL)Timing Kit B-070-1 KIT INCLUDES [B-070], [S560], [S551] & [BT66]Belt B-070 88 TEETHCam Sprocket S560 36 TEETHCrank Sprocket S551 18 TEETHBelt Tensioner BT66

8 1.5L (1456CC) 3E OHC ENG - 1987-90 - 4 Cyl. - 73 MM Bore (TERCEL)Belt B-0136 1987-1988 127 TEETH

B-0233 1989-1990 127 TEETHBelt Tensioner BT206 RIGHT HAND

BT207 LEFT HAND9 1.5L (1456CC) 3EE OHC ENG - 1990-94 - 4 Cyl. - 73 MM Bore (TERCEL) FUEL INJECTED

Belt B-0233 127 TEETHBelt Tensioner BT206 1991-1994 RIGHT HAND

BT207 1991-1994 LEFT HAND10 1.5L (1497CC) 5EFE DOHC ENG - 1992-99 - 4 Cyl. - 74.0 MM Bore (1992-99 PASEO) (1995-99

TERCEL)Belt B-0208 128 TEETHIdler BT5299 LOWER

BT5300 UPPER11 1.5L (1497CC) 1NZFE DOHC ENG - 2000-14 - 4 Cyl. - 75.0 MM Bore (00-05 ECHO, 2006-14 YARIS)

Timing Kit 3-4214SA 2004-2010 KIT INCLUDES [4214C], [S846], [BG5564], [BT5565],[BT5566], (DOES NOT INCLUDE INTAKE CAMSHAFT ACTUATOROR CRANK SPROCKET)

Chain 4214C 2000-2010 124 LINKSCam Sprocket S846 2000-2010 86 TEETH EXH.Chain Tensioner BT5565 2000-2010 TENSIONER

BT5566 2000-2010 TENSIONER ARMChain Guide BG5564 2000-2010 LEFT HAND

12 1.6L (1587CC) 4AC SOHC ENG - 1983-87 - 4 Cyl. - 81 MM Bore (COROLLA)Timing Kit B-070-1 KIT INCLUDES [B-070], [S560], [S551] & [BT66]Belt B-070 88 TEETHCam Sprocket S560 36 TEETHCrank Sprocket S551 18 TEETHBelt Tensioner BT66

13 1.6L (1587CC) 4AF DOHC ENG - 1988-89 - 4 Cyl. - 81 MM Bore (COROLLA COUPE DLX, SR5 FWD)Belt B-036 94 TEETHCam Sprocket S560 36 TEETHCrank Sprocket S551 18 TEETHBelt Tensioner BT66

233


14 1.6L (1587CC) 4AFE DOHC ENG - 1988-97 - 4 Cyl. - 81 MM Bore (1988-92 COROLLA ALL TRAC4WD WAGON DLX, SR5) (1990 COROLLA COUPE DLX, SR5) (1988-97 COROLLA SEDAN, 2WDWAGON STD, DLX, LE) (1990-93 CELICA ST)Timing Kit B-036-1 1988-1992 KIT INCLUDES [B-036], [S560], [S551] & [BT66]Belt B-0236 1994-1997 117 TEETH COROLLA

B-0239 1993 94 TEETHB-036 1988-1992 94 TEETH

Cam Sprocket S560 1988-1992 36 TEETH COROLLAS560 1990-1993 36 TEETH CELICA- EXH.

Crank Sprocket S551 1988-1992 18 TEETHS551 1993 18 TEETH CELICA

Belt Tensioner BT342 1994-1997 COROLLABT66 1988-1993

15 1.6L (1587CC) 4AGE DOHC ENG - 1988-91 - 4 Cyl. - 81 MM Bore (COROLLA GTS COUPE FWD)Belt B-0112 1991 113 TEETH

B-0176 From 4/88 TO 1990 113 TEETHCam Sprocket S622 36 TEETH (2) REQ.Crank Sprocket S631 18 TEETHBelt Tensioner BT135

16 1.6L (1587CC) 4AGEC DOHC ENG - 1985-87 - 4 Cyl. - 81 MM Bore (COROLLA GTS SPORT COUPERWD)Belt B-0112 113 TEETHCam Sprocket S622 36 TEETH (2) REQ.Crank Sprocket S631 18 TEETHBelt Tensioner BT135

17 1.6L (1587CC) 4AGELC DOHC ENG - 1985-89 - 4 Cyl. - 81 MM Bore (MR2) (1987-88 COROLLAFX16 & FX16 GTS)Belt B-0112 To 3/88 113 TEETHCam Sprocket S622 36 TEETH 2 REQ.Crank Sprocket S631 18 TEETHBelt Tensioner BT135

18 1.6L (1587CC) 4AGZE DOHC ENG - 1988-89 - 4 Cyl. - 81 MM Bore (MR2 SUPERCHARGED)Belt B-0112 1988 113 TEETH

B-0176 1989 113 TEETHCam Sprocket S622 36 TEETH (2) REQ.Crank Sprocket S631 18 TEETHBelt Tensioner BT135

19 1.6L (1587CC) 4ALC SOHC ENG - 1984-88 - 4 Cyl. - 81 MM Bore (COROLLA)Timing Kit B-070-1 KIT INCLUDES [B-070], [S560], [S551] & [BT66]Belt B-070 88 TEETHCam Sprocket S560 36 TEETHCrank Sprocket S551 18 TEETHBelt Tensioner BT66

20 1.6L (1588CC) 2TC OHV ENG - 1971-79 - 4 Cyl. - 85 MM Bore (1971-79 COROLLA) (1972-73CARINA TAIL)Timing Kit 3DR60-1 KIT INCLUDES [3DR60], [S465], [S479], [BT01] & [BD23]Chain 3DR60 60 LINKSCam Sprocket S479 36 TEETHChain Tensioner BT01Damper BD23

234


21 1.8L (1762CC) 7AFE DOHC ENG - 1993-97 - 4 Cyl. - 81 MM Bore (1993-97 COROLLA) (1994-97CELICA)Belt B-0235 121 TEETHBelt Tensioner BT342 1993 To 4/97

22 1.8L (1770CC) 3TC OHV ENG - 1980-82 - 4 Cyl. - 85 MM Bore (COROLLA)Timing Kit 3DR60-1 KIT INCLUDES [3DR60], [S465], [S479], [BT01] & [BD23]Chain 3DR60 60 LINKSCam Sprocket S479 36 TEETHChain Tensioner BT01Damper BD23

23 1.8L (1794CC) 1ZZFE DOHC ENG - 1998-08 - 4 Cyl. - 79.0 MM Bore (00-05 CELICA GT, 98-08COROLLA, 03-08 MATRIX, 00-05 MR2 SPYDER)Timing Kit 3-4200SA 2000-2008 SOLD AS KIT ONLY; KIT INCLUDES (1) CHAIN,(1)

TENSIONER,(2) GUIDES,(1) CAM SPROCKET,(1) CRANKSPROCKET, (1) SEAL, (2) SHIMS, (1) PIVOT BOLT NOTE: SHIMSMUST BE PLACED BEHIND THE CURVE RAIL PIVOT BOLT

Cam Sprocket S846 86 TEETH24 1.8L (1795CC) 2ZZGE DOHC ENG - 2000-06 - 4 Cyl. - 82 MM Bore (00-05 CELICA GTS, 05-06

COROLLA, 03-06 MATRIX)Timing Kit 3-0420S SOLD AS KIT ONLY; KIT INCLUDES (1) CHAIN,(1)

TENSIONER,(2) GUIDES,(1) CAM SPROCKET,(1) CRANKSPROCKET, (1) SEAL

25 1.8L (1839CC) 1CLC OHC ENG - 1984-85 - 4 Cyl. - 83 MM Bore (COROLLA CE80 DIESEL)Belt Tensioner BT124 1984-1985 LOWER

26 1.8L (1839CC) 1CTLC OHC ENG - 1984-85 - 4 Cyl. - 83 MM Bore (CAMRY CV10 DIESEL)Belt Tensioner BT124 1984-1985 LOWER

27 1.9L (1898CC) 8RC OHC ENG - 1969-71 - 4 Cyl. - 86 MM Bore (1971 CELICA) (1971-72 HILUX)(1969-71 CORONA)Timing Kit 3DR62-1 KIT INCLUDES (2) [3DR62], [S465], [S464], [S479], [S490],

[BT04], [BT03] & [BD24]Chain 3DR62 62 LINKS (2) REQ.Cam Sprocket S479 36 TEETH JACKSHAFT; INNERIntermediate Sprocket S490 24 TEETH CAM DRIVE

28 2.0L (1968CC) 18RC OHC ENG - 1972-74 - 4 Cyl. - 88 MM Bore (1972-74 CELICA) (1972-74CORONA) (1972-74 PICKUP) (1972 HILUX)Timing Kit 3DR62-1 KIT INCLUDES (2) [3DR62], [S465], [S464], [S479], [S490],

[BT04], [BT03] & [BD24]Chain 3DR62 62 LINKS (2) REQ.Cam Sprocket S479 36 TEETH JACKSHAFT; INNERIntermediate Sprocket S490 24 TEETH CAM DRIVE

29 2.0L (1974CC) 2CTLC OHC ENG - 1986-87 - 4 Cyl. - 86 MM Bore (CAMRY CV11 DIESEL)Belt Tensioner BT124 1986 LOWER

30 2.0L (1995CC) 2SELC OHC ENG - 1983-86 - 4 Cyl. - 84 MM Bore (1986 CELICA) (1983-86 CAMRY)Belt B-087 139 TEETHBelt Tensioner BT104 1983-1986 RIGHT #1

BT111 1983-1986 LEFT #231 2.0L (1998CC) 1AZFE DOHC ENG - 2001-03 - 4 Cyl. - 86 MM Bore (RAV4)

Timing Kit 3-752S SOLD AS KIT ONLY; KIT INCLUDES (2) CHAINS,(1)TENSIONER,(3) GUIDES,(1) CAM SPROCKET,(1) CRANKSPROCKET, (1) OIL PUMP SPROCKET, (1) SEAL, (1) GASKET

235


32 2.0L (1998CC) 3SFE DOHC ENG - 1987-00 - 4 Cyl. - 86 MM Bore (1987-89 CELICA) (1987-91CAMRY) (1992-95 NOT USED) (1996-00 RAV 4)Belt B-0199 1987-1991 163 TEETH

B-0199 1996-2000 163 TEETHBelt Tensioner BT111 1987-1991 LOWER #2

BT111 1996-2000 LOWER #2BT301 1987-1991 UPPERBT301 1996-2000 UPPER

33 2.0L (1998CC) 3SGELC DOHC ENG - 1986-89 - 4 Cyl. - 86 MM Bore (CELICA)Belt B-0125 178 TEETHBelt Tensioner BT111 1986-1989 LOWER #2

34 2.0L (1998CC) 3SGTE DOHC ENG - 1988-95 - 4 Cyl. - 86 MM Bore (1988-93 CELICA) (1991-95 MR2)Belt B-0125 178 TEETHBelt Tensioner BT111 1988-1995 LOWER #2

35 2.0L (1998CC) 3YEC OHV ENG - 1984-85 - 4 Cyl. - 86 MM Bore (VAN)Timing Kit 3DR60-1 KIT INCLUDES [3DR60], [S465], [S479], [BT01] & [BD23]Chain 3DR60 60 LINKSCam Sprocket S479 36 TEETHChain Tensioner BT01Damper BD23

36 2.2L (2164CC) 5SFE DOHC ENG - 1990-01 - 4 Cyl. - 87 MM Bore (1990-99 CELICA) (1991-95 MR2)(1992-01 CAMRY) (1999-01 SOLARA)Belt B-0199 1990-1993 163 TEETH CELICA GTS WITHOUT TURBO

B-0199 1991-2001 163 TEETH MR2, CAMRY, SOLARAB-0199 1994-1998 163 TEETH CELICA

Belt Tensioner BT111 1990-2001 LOWER #2BT301 1990-2001 UPPER

37 2.2L (2164CC) 5SFNE DOHC - 2000-01 - 4 Cyl. - 87.0 MM Bore (CAMRY) CNGBelt Tensioner BT301

38 2.2L (2188CC) L OHC ENG - 1981-83 - 4 Cyl. - 90 MM Bore (PICKUP DIESEL)Cam Sprocket S594 1981 To 5/82 42 TEETH

39 2.2L (2189CC) 20R OHC ENG - 1975-80 - 4 Cyl. - 88 MM Bore (CORONA, CELICA & PICKUP)Timing Kit 3DR98-1 KIT INCLUDES [3DR98], [S459], [S483], [BT16], [BD26] & [BD25]Chain 3DR98 98 LINKSCrank Sprocket S459 36 TEETHChain Tensioner BT16Damper BD25 1975-1980 #1; LEFT HAND

BD26 1975-1980 #2; RIGHT HAND40 2.2L (2237CC) 4YEC OHV ENG - 1986-89 - 4 Cyl. - 91 MM Bore (VAN)

Timing Kit 3DR60-1 KIT INCLUDES [3DR60], [S465], [S479], [BT01] & [BD23]Chain 3DR60 60 LINKSCam Sprocket S479 36 TEETHChain Tensioner BT01Damper BD23

41 2.3L (2253CC) 2M OHC ENG - 1972 - 6 Cyl. - 75 MM Bore MARK IIIntermediate Sprocket S457 30 TEETHTension Sprocket S577 20 TEETHChain Tensioner BT18Damper BD43 1972 #1; RIGHT HAND

236


42 2.4L (2362CC) 2AZFE DOHC ENG - 2001-2013 - 4 Cyl. - 88.5 MM Bore(CAMRY,COROLLA,HIGHLANDER,MATRIX,RAV4,SOLARA) GAS ENG (INCLUDES TRUCKS)Timing Kit 3-752S 2001-2011 SOLD AS KIT ONLY; KIT INCLUDES (2) CHAINS,(1)


43 2.4L (2362CC) 2AZFXE DOHC - 2007-11 - 4 Cyl. - 88.5 MM Bore (CAMRY) HYBRIDTiming Kit 3-752S 2007-2010 SOLD AS KIT ONLY; KIT INCLUDES (2) CHAINS,(1)


44 2.4L (2366CC) 22R OHC ENG - 1981-90 - 4 Cyl. - 92 MM Bore (1981 CORONA) (1981-84 CELICA)(1981-90 PICKUP) (CARB ENGS.)Timing Kit 3DR98-1 1981-1982 KIT INCLUDES [3DR98], [S459], [S483], [BT16], [BD26]

& [BD25]3SR96-1 1985-1990 KIT INCLUDES [3SR96], [S593], [S600], [BT100],

[BD102] & [BD132] (STANDARD DUTY)3SR96-1HD 1985-1990 KIT INCLUDES [3SR96], [S593], [S600], [BT100],

[BD102HD], [BD132] (HEAVY DUTY)3SR98-1 1983-1984 KIT INCLUDES [3SR98], [S593], [S600], [BT100],

[BD102] & [BD101]Chain 3DR98 1981-1982 98 LINKS

3SR96 1985-1990 96 LINKS3SR98 1983-1984 98 LINKS

Cam Sprocket S600 1983-1990 36 TEETHCrank Sprocket S593 1983-1990 18 TEETHChain Tensioner BT100 1983-1990

BT16 1981-1982Damper BD101 1983-1984 RIGHT HAND #2

BD102 1983-1990 LEFT HAND #1; STANDARD DUTY; PLASTICCONSTRUCTION

BD102HD 1983-1990 LEFT HAND #1; HEAVY DUTY; STEELCONSTRUCTION

BD132 1985-1990 RIGHT HAND #2BD25 1981-1982 LEFT HAND #1BD26 1981-1982 RIGHT HAND #2

Timing Cover MOC300 1984-199045 2.4L (2366CC) 22RE OHC ENG - 1989-95 - 4 Cyl. - 92 MM Bore (2WD & 4WD PICKUP & 4 RUNNER)

(MFI ENGS.)Timing Kit 3SR96-1 KIT INCLUDES [3SR96], [S593], [S600], [BT100], [BD102] &

[BD132] (STANDARD DUTY)3SR96-1HD KIT INCLUDES [3SR96], [S593], [S600], [BT100], [BD102HD],

[BD132] (HEAVY DUTY)Chain 3SR96 96 LINKSCam Sprocket S600 36 TEETHCrank Sprocket S593 18 TEETHChain Tensioner BT100Damper BD102 LEFT HAND #1; STANDARD DUTY; PLASTIC CONSTRUCTION

BD102HD LEFT HAND #1; HEAVY DUTY; STEEL CONSTRUCTIONBD132 RIGHT HAND #2

Timing Cover MOC30046 2.4L (2366CC) 22REC SOHC ENG - 1983-89 - 4 Cyl. - 92.0 MM Bore (1984-89 PICKUP) (1983-85

CELICA) (MFI ENGS.)Timing Kit 3SR96-1 1985-1989 KIT INCLUDES [3SR96], [S593], [S600], [BT100],

[BD102] & [BD132] STANDARD DUTYContinued on Next Page

237


46 2.4L (2366CC) 22REC SOHC ENG - 1983-89 - 4 Cyl. - 92.0 MM Bore (1984-89 PICKUP) (1983-85CELICA) (MFI ENGS.) (Continued)Timing Kit 3SR96-1HD 1985-1989 KIT INCLUDES [3SR96], [S593], [S600], [BT100],

[BD102HD], [BD132] HEAVY DUTYChain 3SR96 1985-1989 96 LINKS

3SR98 1983-1984 98 LINKSCam Sprocket S600 36 TEETHCrank Sprocket S593 18 TEETHChain Tensioner BT100Damper BD101 1983-1984 RIGHT HAND #2

BD102 LEFT HAND #1; STANDARD DUTY; PLASTIC CONSTRUCTIONBD102HD LEFT HAND #1; HEAVY DUTY; STEEL CONSTRUCTIONBD132 1985-1989 RIGHT HAND #2

Timing Cover MOC300 1984-198947 2.4L (2366CC) 22RTEC OHC ENG - 1985-88 - 4 Cyl. - 92 MM Bore (TRUCKS) (OHC TURBO ENGS.)

Timing Kit 3SR96-1 KIT INCLUDES [3SR96], [S593], [S600], [BT100], [BD102] &[BD132] (STANDARD DUTY)

3SR96-1HD KIT INCLUDES [3SR96], [S593], [S600], [BT100], [BD102HD],[BD132] (HEAVY DUTY)

Chain 3SR96 96 LINKSCam Sprocket S600 36 TEETHCrank Sprocket S593 18 TEETHChain Tensioner BT100Damper BD102 STANDARD DUTY; PLASTIC CONSTRUCTION

BD102HD HEAVY DUTY; STEEL CONSTRUCTIONBD132 RIGHT HAND #2

48 2.4L (2438CC) 2RZFE DOHC ENG - 1995-04 - 4 Cyl. - 95 MM Bore (TACOMA 2WD)Timing Kit 3-4167S SOLD AS KIT ONLY; KIT INCLUDES (1) CHAIN,(1)

TENSIONER,(2) GUIDES,(1) CAM SPROCKET,(1) CRANKSPROCKET, (4) SEALS, (6) GASKETS, (1) PIVOT BOLT

Chain 3SR102 102 LINKS CAMSHAFTCrank Sprocket S593 18 TEETHChain Tensioner BT359Chain Guide BG5434 R.H.

BG5435 L.H.49 2.4L (2438CC) 2TZFE DOHC ENG - 1991-95 - 4 Cyl. - 95 MM Bore (PREVIA) (2TZFE

NON-SUPERCHARGED)Chain 3SR102 102 LINKS CAMSHAFT

8MMSR60 60 LINKS WATER PUMPCam Sprocket S754 36 TEETH LEFTCrank Sprocket S771 18 TEETHChain Tensioner BT199 1991 To 1/1994Chain Guide BG200 1991 To 1/1994 R.H.

50 2.4L (2438CC) 2TZFZE DOHC ENG - 1994-97 - 4 Cyl. - 95 MM Bore (PREVIA) (2TZFZESUPERCHARGED)Chain 3SR102 102 LINKS CAMSHAFT

8MMSR60 60 LINKS WATER PUMPCam Sprocket S754 36 TEETH LEFTCrank Sprocket S771 18 TEETHChain Tensioner BT359Chain Guide BG5434 R.H.

BG5435 L.H.

238


51 2.5L (2508CC) 2VZFE DOHC ENG - 1988-91 - V6 - 87 MM Bore (CAMRY)Belt B-0157 179 TEETH

52 2.6L (2563CC) 4M SOHC ENG - 1971-79 - 6 Cyl. - 80.0 MM Bore (1978-79 CRESSIDA) (1973-76MARK II, 1973 MARK II CORONA) (1971-73 CROWN) ENG NOT USED IN 1977Intermediate Sprocket S457 30 TEETHTension Sprocket S577 20 TEETHChain Tensioner BT18 1971-1976

BT68 1978-1979 CRESSIDADamper BD43 #1; RIGHT HAND

53 2.6L (2563CC) 4ME OHC ENG - 1979-80 - 6 Cyl. - 80 MM Bore (CELICA & CRESSIDA)Intermediate Sprocket S457 30 TEETHChain Tensioner BT68

54 2.7L (2694CC) 2TRFE DOHC ENG - 2005-13 - 4 Cyl. - 95.0 MM Bore (TACOMA,4RUNNER)Chain Tensioner BT358 2005-2007 SECONDARY

55 2.7L (2694CC) 3RZFE DOHC ENG - 1994-04 - 4 Cyl. - 95 MM Bore (96-00 4-RUNNER, 94-98 T100PICKUP & 95-04 TACOMA)Timing Kit 3-3SRH106 KIT INCLUDES [3SRH106], [8MMSRH82], [S754], [S593], [BT358],

[BT359], [BG360], [BD361], [BD362], [BD363], [BD364]Chain 3SRH106 1994-2004 106 LINKS OUTER

8MMSRH82 1994-2004 82 LINKS INNERCam Sprocket S754 1994-2004 36 TEETH INTAKECrank Sprocket S593 1994-2004 18 TEETH OUTERChain Tensioner BT358 1994-2004 INNER

BT359 1994-2004 OUTERDamper BD361 1994-2004 OUTER LEFT HAND

BD362 1994-2004 INNER UPPERBD363 1994-2004 INNER LOWERBD364 1994-2004 INNER LEFT HAND

Chain Guide BG360 1994-2004 OUTER RIGHT HAND56 2.8L (2754CC) 5ME OHC ENG - 1981-82 - 6 Cyl. - 83 MM Bore (1981-82 CELICA-SUPRA) (1981-82

CRESSIDA-MX6)Intermediate Sprocket S457 30 TEETHChain Tensioner BT68

57 2.8L (2754CC) 5MGE DOHC ENG - 1982-88 - 6 Cyl. - 83 MM Bore (1982-86 CELICA-SUPRA)(1982-88 CRESSIDA-MX6 & MX7)Belt B-0101 1984-1988 169 TEETH


58 3.0L (2959CC) 3VZE SOHC ENG - 1988-95 - V6 - 87.5 MM Bore (1988-95 PICKUP & 4 RUNNER)(1993-94 T100)Belt B-0154 1988-1992 193 TEETH

B-0240 1993-1995 193 TEETHBelt Tensioner BT209 LOWER

59 3.0L (2959CC) 3VZFE DOHC ENG - 1992-93 - V6 - 87.5 MM Bore (CAMRY)Belt B-0200 191 TEETH

60 3.0L (2954CC) 7MGE, 7MGTE DOHC ENG - 1986-92 - 6 Cyl. - 83 MM Bore (1986-92 SUPRA 7MGE)(1989-92 CRESSIDA 7MGE) (1987-92 SUPRA 7MGTE TURBO)Belt B-0126 1986-1990 159 TEETH


239


61 3.0L (2995CC) 1MZFE DOHC ENG - 1994-06 - V6 - 87.5 MM Bore (94-06 CAMRY) (95-04 AVALON)(98-03 SIENNA VAN) (99-03 SOLARA) (01-03 HIGHLANDER)Belt B-0257 211 TEETH

62 3.0L (2997CC) 2JZGE DOHC ENG - 1993-97 - 6 Cyl. - 86 MM Bore (ALSO 2JZGTE) (SUPRA)Belt B-0215 143 TEETH

63 3.4L (3378CC) 5VZFE DOHC ENG - 1995-04 - V6 - 93.5 MM Bore (00-04 TUNDRA, 96-02 4-RUNNER,95-98 T100 & 95-04 TACOMA)Belt B-0271 191 TEETH

64 3.5L (3456CC) 2GRFE DOHC ENG - 2005-13 - V6 - 94 MM Bore(AVALON,CAMRY,HIGHLANDER,RAV4,SIENNA,VENZA) 24V GAS ENG. (INCLUDES TRUCKS)Timing Kit 3-0490S 2005-2011 SOLD AS KIT ONLY; KIT INCLUDES (3) CHAINS,(3)

TENSIONERS,(4) GUIDES, (1) CRANK SPROCKET, (1) IDLERSPROCKET

65 3.9L (3878CC) F OHV ENG - 1960-74 - 6 Cyl. - 90 MM Bore (LANDCRUISER FJ40 & FJ55)Cam Gear 2202 54 TEETHCrank Gear 2203 27 TEETH

66 4.0L (3956CC) 1GRFE DOHC ENG - 2003-13 - V6 - 94.0 MM Bore (4RUNNER,FJ CRUISER,TACOMA,TUNDRA)Timing Kit 3-0470S 2003-2011 SOLD AS KIT ONLY; KIT INCLUDES (3) CHAINS,(3)

TENSIONERS,(4) GUIDES,(2) EXH. CAM SPROCKETS,(1)CRANK SPROCKET, (1) IDLER SPROCKET 4 RUNNER,FJCRUISER,TACOMA,TUNDRA

67 4.2L (4227CC) 2F OHV ENG - 1975-87 - 6 Cyl. - 94 MM Bore (LANDCRUISER FJ40, FJ55, FJ60)Cam Gear 2202 54 TEETHCrank Gear 2203 27 TEETH

68 4.7L (4663CC) 2UZFE DOHC ENG - 1998-09 - 8 Cyl. - 3.70 Bore (TUNDRA, SEQUOIA, LANDCRUISER, 4RUNNER)Belt B-0298 211 TEETH INTERFERENCE ENGINEBelt Tensioner BT5525 TENSIONER PULLEY


TRIUMPHEngine Year Line Engine Year Line Engine Year Line

4 Cyl.1147CC OHV 1961-67 11296CC OHV 1967-72 2

4 Cyl. (Continued)

1493CC OHV 1975-80 36 Cyl.1998CC OHV 1967-73 42498CC OHV 1968-76 5


1 1147CC OHV ENG - 1961-67 - 4 Cyl. - 2.7279 Bore (HERALD, SPITFIRE MK I & II)Chain 3SR62 62 LINKS

2 1296CC OHV ENG - 1967-72 - 4 Cyl. - 2.8995 Bore (SPITFIRE MK III & IV)Chain 3SR62 62 LINKS

3 1493CC OHV ENG - 1975-80 - 4 Cyl. - 2.8995 Bore (SPITFIRE MK IV)Chain 3SR62 62 LINKS

4 1998CC OHV ENG - 1967-73 - 6 Cyl. - 74.7 MM Bore (1967-73 GT6) (1967 2000)Chain 3SR62 62 LINKS

5 2498CC OHV ENG - 1968-76 - 6 Cyl. - 2.9405 Bore (TR6 & TR250)Chain 3DR62 62 LINKS EXC. 1968 TR250

3SR62 1968 62 LINKS TR250

240

VOLKSWAGENEngine Year Line Engine Year Line Engine Year Line

4 Cyl.1.5 (1457CC) OHC 1978-80 11.5 (1471CC) OHC 1977-80 21.5 (1471CC) OHC 1974-75 31.6 (1588CC) SOHC 1985-92 41.6 (1588CC) SOHC 1985 51.6 (1588CC) SOHC 1983-84 61.6-H (1588CC) SOHC 1982-84 71.6 (1588CC) SOHC 1982-84 81.6 (1588CC) SOHC 1976-80 91.6 (1588CC) SOHC 1976-80 101.6 (1588CC) SOHC 1981-83 11

4 Cyl. (Continued)

1.7 (1715CC) OHC 1982-83 121.7-A,B (1715CC) SOHC 1981-84 131.8 (1780CC) DOHC 1986-89 141.8 (1780CC) OHC 1987-93 151.8 (1780CC) OHC 1984-85 161.8 (1780CC) OHC 1993-97 171.8 (1780CC) OHC 1990-92 181.8.0 (1781CC) DOHC 1998-06 191.8 (1780CC) SOHC 1983-93 201.9 (1896CC) SOHC 1996-06 212.0 (1967CC) SOHC 2004-05 22

4 Cyl. (Continued)

2.0 (1984CC) SOHC 1998-00 232.0 (1984CC) SOHC 1993-02 242.0 (1984CC) DOHC 1990-93 252.0 (1984CC) DOHC 2006-13 255 Cyl.2.2 (2144CC) OHC 1984 262.2 (2144CC) OHC 1983 272.2 (2226CC) SOHC 1985-88 286 Cyl.2.8 (2792CC) SOHC 1992-02 29


1 1.5 (1457CC) OHC ENG - 1978-80 - 4 Cyl. - 79.5 MM Bore (1978-80 RABBIT-ENG CODE EH, FX &EN) (1978-79 SCIROCCO ENG CODE EH & EN)Belt B-017 121 TEETHBelt Tensioner BT148

2 1.5 (1471CC) OHC ENG - 1977-80 - 4 Cyl. - 76.5 MM Bore (DIESEL) (1979-80 DASHER) (1977-80RABBIT) (1980 PICK-UP) (ENG CODE CK)Belt B-043 135 TEETHBelt Tensioner BT89

3 1.5 (1471CC) OHC ENG - 1974-75 - 4 Cyl. - 76.5 MM Bore (GAS) (1974-75 DASHER ENG CODESXR,XS XV,XW,XY,XZ) (1974-75 RABBIT ENG CODES FC & FG) (1975 SCIROCCO ENG CODES FC &FG)Belt B-017 121 TEETHBelt Tensioner BT148

4 1.6 (1588CC) SOHC ENG - 1985-92 - 4 Cyl. - 79.5 MM Bore (DIESEL) (1985-88 GOLF ENG CODEME) (1985-86 & 1989-91 JETTA ENG CODE ME)(1985-86 & 1989-92 JETTA ENG CODE MF) (1992JETTA ENG CODE 1V)Belt B-043 135 TEETHCrank Sprocket S663 1985-1989 22 TEETHBelt Tensioner BT89

5 1.6 (1588CC) SOHC ENG - 1985 - 4 Cyl. - 79.5 MM Bore (TURBO DIESEL ENG)(QUANTUM)(ENGCODE MD)Belt B-043 135 TEETHCrank Sprocket S663 22 TEETHBelt Tensioner BT89

6 1.6 (1588CC) SOHC ENG - 1983-84 - 4 Cyl. - 79.5 MM Bore (DIESEL ENG)(RABBIT & JETTA)(ENGCODE JK)Belt B-043 135 TEETHCrank Sprocket S663 22 TEETHBelt Tensioner BT89

7 1.6-H (1588CC) SOHC ENG - 1982-84 - 4 Cyl. - 79.5 MM Bore (TURBO DIESEL ENG)(1983 RABBIT,1983-84 JETTA & 1982-84 QUANTUM)(ENG CODE CY)Belt B-043 135 TEETHCrank Sprocket S663 1983-1984 22 TEETHBelt Tensioner BT89

8 1.6 (1588CC) SOHC ENG - 1982-84 - 4 Cyl. - 79.5 MM Bore (DIESEL ENG)(VANAGON)(ENG CODECS)Belt B-043 135 TEETHContinued on Next Page

241

VOLKSWAGEN (Continued)LineNo. Part Title Part No Description

8 1.6 (1588CC) SOHC ENG - 1982-84 - 4 Cyl. - 79.5 MM Bore (DIESEL ENG)(VANAGON)(ENG CODECS) (Continued)Crank Sprocket S663 1983-1984 22 TEETHBelt Tensioner BT89

9 1.6 (1588CC) SOHC ENG - 1976-80 - 4 Cyl. - 79.5 Bore (GAS) (1980 JETTA) (1976-77 & 80 RABBIT,RABBIT PICK UP) (1976-77 & 1979-80 SCIROCCO) (ENG. CODES EE, EJ & FN) (NOT PRODUCEDIN 1978)Belt B-017 121 TEETHBelt Tensioner BT148

10 1.6 (1588CC) SOHC ENG - 1976-80 - 4 Cyl. - 79.5 MM Bore (GAS) (DASHER YG,YH,YK ENGCODES)Belt B-017 121 TEETHBelt Tensioner BT148

11 1.6 (1588CC) SOHC ENG - 1981-83 - 4 Cyl. - 79.5 MM Bore (DIESEL) (1981 DASHER) (1981-82JETTA) (1981-83 RABBIT) (1981-83 RABBIT PICK-UP) (ALL ENG CODES CR)Belt B-043 135 TEETHBelt Tensioner BT89 1981

12 1.7 (1715CC) OHC ENG - 1982-83 - 4 Cyl. - 79.5 MM Bore (GAS ENG)(QUANTUM)(ENG CODE WT)Belt B-017 121 TEETHCam Sprocket S658 1983 44 TEETHBelt Tensioner BT148

13 1.7-A,B (1715CC) SOHC ENG - 1981-84 - 4 Cyl. - 79.5 MM Bore (GAS ENG)(1981-84 JETTA,RABBIT)(1981-83 PICK-UP)(1981-83 SCIROCCO)(ENG CODE EN & JF)Belt B-017 121 TEETHCam Sprocket S658 1983-1984 44 TEETHBelt Tensioner BT148

14 1.8 (1780CC) DOHC ENG - 1986-89 - 4 Cyl. - 81 MM Bore (GAS ENG)(SCIROCCO,JETTA GLI,GOLFGTI) 16V (ENG CODE PL)(DOHC)Belt B-0133 147 TEETH

15 1.8 (1780CC) OHC ENG - 1987-93 - 4 Cyl. - 81 MM Bore (GAS ENG)(FOX)(ENG CODE JN,UM & ABG)Belt B-017 121 TEETHCam Sprocket S658 44 TEETHBelt Tensioner BT148

16 1.8 (1780CC) OHC ENG - 1984-85 - 4 Cyl. - 81 MM Bore (GAS ENG)(QUANTUM)(ENG CODE JN)Belt B-017 121 TEETHCam Sprocket S658 44 TEETHBelt Tensioner BT148

17 1.8 (1780CC) OHC ENG - 1993-97 - 4 Cyl. - 81 MM Bore (GOLF, JETTA)(ENG CODE ACC)Belt B-017 1993-1996 121 TEETHCam Sprocket S658 44 TEETHBelt Tensioner BT148

18 1.8 (1780CC) OHC ENG - 1990-92 - 4 Cyl. - 81 MM Bore (CORRADO G60) (ENG CODE PG)Belt B-017 121 TEETHCam Sprocket S658 44 TEETHBelt Tensioner BT148

19 1.8 (1781CC) DOHC ENG - 1998-06 - 4 Cyl. - 81.0 MM Bore (1999-05 BEETLE) (2000-06 GOLF &JETTA) (1998-05 PASSAT) (ENG CODES AEB,APH,ATW,AVG,AWD,AWM,AWP,AWV,AWW,BKF)Belt B-0291 1998-1999 152 TEETH (INTERFERENCE ENG APPLICATION)

PASSAT ENG CODE AEB W/152T BELTContinued on Next Page

242

VOLKSWAGEN (Continued)LineNo. Part Title Part No Description

19 1.8 (1781CC) DOHC ENG - 1998-06 - 4 Cyl. - 81.0 MM Bore (1999-05 BEETLE) (2000-06 GOLF &JETTA) (1998-05 PASSAT) (ENG CODES AEB,APH,ATW,AVG,AWD,AWM,AWP,AWV,AWW,BKF)(Continued)Belt B-0306 150 TEETH (INTERFERENCE ENG APPLICATION) GOLF GLS,

NEW BEETLE GLS W/ENG CODES AWP, AWV, AWW, AWD, APH20 1.8 (1780CC) SOHC ENG - 1983-93 - 4 Cyl. - 81.0 MM Bore (GAS ENG)(1984-92 JETTA)(1984-87

SCIROCCO)(1985-92 GOLF)(1983-84 RABBIT)(1997-93 FOX)(1990-92 CORRADO)(1984-85QUANTUM)(1985-93 CABRIOLET) (ENG CODES GX,HT,RD,RV,PF,2H,JH)Belt B-017 121 TEETHCam Sprocket S658 44 TEETHBelt Tensioner BT148

21 1.9 (1896CC) SOHC ENG - 1996-06 - 4 Cyl. - 79.5 MM Bore (PASSAT 1996-98) (GOLF, JETTA1996-06) (NEW BEETLE 1998-06) DIESEL 1998-05) (ENG. CODE AAZ,AHU,1Z,ALH,BEW,BRM)Belt B-0301 1998-2000 141 TEETH NEW BEETLE

B-0301 1998 To 02/01 141 TEETH GOLF, JETTACrank Sprocket S663 1996-1998 22 TEETH

22 2.0 (1967CC) SOHC ENG - 2004-05 - 4 Cyl. - 81 MM Bore (PASSAT) (ENG CODE BHW) TURBODIESELBelt B-0333 120 TEETH

23 2.0 (1984CC) SOHC ENG - 1998-00 - 4 Cyl. - 82.5 MM Bore (JETTA,GOLF,NEW BEETLE) (ENG.CODE AEG)Belt B-0296 138 TEETH

24 2.0 (1984CC) SOHC ENG - 1993-02 - 4 Cyl. - 82.5 MM Bore (1993-99 GOLF,JETTA) (1995-96PASSAT) (1995-02 GOLF CABRIO CONVERTIBLE) (ENG CODE ABA)Belt B-0262 1993-1999 124 TEETHCam Sprocket S658 1996-2001 44 TEETHBelt Tensioner BT148 1993-1997

25 2.0 (1984CC) DOHC ENG - 2006-13 - 4 Cyl. - 82.6 MM Bore (2012-13 BEETLE,2009-13 CC,2007-13EOS,2012-13 GOLF,2006-13 GTI,JETTA 2006-13,2006-10 PASSAT,2009-10 PASSAT CC,2009-13TIGUAN) (BPY,CBFA,CCTA,CRZA) 16V TURBO (INCLUDES TRUCKS)Belt B-0334 2006-2008 148 TEETH EOS, GTI, JETTA, PASSAT

26 2.2 (2144CC) OHC ENG - 1984 - 5 Cyl. - 79.5 MM Bore (QUANTUM)(ENG CODE KM)Belt B-0127 120 TEETHCam Sprocket S658 44 TEETHCrank Sprocket S581 22 TEETH

27 2.2 (2144CC) OHC ENG - 1983 - 5 Cyl. - 79.5 MM Bore (QUANTUM)(ENG CODE WE)Cam Sprocket S658 44 TEETHCrank Sprocket S581 22 TEETH

28 2.2 (2226CC) SOHC ENG - 1985-88 - 5 Cyl. - 81.0 MM Bore (QUANTUM & QUANTUM SYNCHRO4WD)(ENG CODE JT & KX)Belt B-0127 120 TEETHCam Sprocket S658 44 TEETHCrank Sprocket S581 22 TEETH

29 2.8 (2792CC) SOHC ENG - 1992-02 - V6 - 81 MM Bore (CORRADO 1992-95, GOLF 1995-02, JETTA1994-02, PASSAT 1993-97) (ENG CODES AAA,AFP)Belt B-0297 1998-2001 253 TEETH

243

VOLVOEngine Year Line Engine Year Line Engine Year Line

4 Cyl.1.9 (1948CC) DOHC 2000-04 12.1 (2127CC) SOHC 1976-85 22.3 (2316CC) DOHC 1989-92 32.3 (2316CC) SOHC 1985-95 42.3 (2316CC) SOHC 1983-84 5

5 Cyl.2.3 (2319CC) DOHC 1995-98 62.3 (2319CC) DOHC 1998-04 72.4 (2435CC) DOHC 1993-10 86 Cyl.2.7 (2673CC) SOHC 1976-79 9

6 Cyl. (Continued)

2.8-6 (2849CC) SOHC 1980-90 102.9 (2917CC) DOHC 1992-05 11


1 1.9 (1948CC) DOHC ENG - 2000-04 - 4 Cyl. - 83 MM Bore (S40,V40) B4204T,B4204T2,B4204T3(TURBO)Belt B-0311 2000-2001 142 TEETH INTERFERENCE ENGINE APPLICATION

B-0331 2002-2004 142 TEETH INTERFERENCE ENGINE APPLICATION2 2.1 (2127CC) SOHC ENG - 1976-85 - 4 Cyl. - 92 MM Bore (B21A,B21F,B21FT)

Belt B-032 123 TEETHCam Sprocket S676 38 TEETH

3 2.3 (2316CC) DOHC ENG - 1989-92 - 4 Cyl. - 96 MM Bore (B234F) 740, 940Belt B-0173 1989 164 TEETH TIMING BELT (INTERFERENCE ENGINE

APPLICATION) 740 SERIESB-0174 1989 110 TEETH BAL. SHAFT (INTERFERENCE ENGINE

APPLICATION) 740 SERIESB-0198 1991-1992 167 TEETH TIMING BELT (INTERFERENCE ENGINE

APPLICATION) 940 SERIES4 2.3 (2316CC) SOHC ENG - 1985-95 - 4 Cyl. - 96 MM Bore (B230F,B230FD,B230FT)


Cam Sprocket S676 1985-1992 38 TEETH5 2.3 (2316CC) SOHC ENG - 1983-84 - 4 Cyl. - 96 MM Bore (B23F,B23FT)

Belt B-032 123 TEETHCam Sprocket S676 38 TEETHCrank Sprocket S677 19 TEETH

6 2.3 (2319CC) DOHC ENG - 1995-98 - 5 Cyl. - 81 MM Bore (BEFORE VIN 1266127) 850, C70, S70,V70 (B5234T,B5234T1,B5234T3,B5234T5,B5234T6)Belt B-0252 148 TEETH INTERFERENCE ENGINE APPLICATION

7 2.3 (2319CC) DOHC ENG - 1998-04 - 5 Cyl. - 81 MM Bore (AFTER VIN 1266128) C70, S60, S70, V70(B5234T3,B5234T6,B5234T8, B5234T9)Belt B-0311 1998-2001 142 TEETH INTERFERENCE ENGINE APPLICATION

B-0331 2002-2004 142 TEETH INTERFERENCE ENGINE APPLICATION8 2.4 (2435CC) DOHC ENG - 1993-10 - 5 Cyl. - 83.0 MM Bore (850,C70,S40,S60,S70,V50,V70)

Belt B-0217 1993 Early 1993 143 TEETH (BEFORE VIN 1266127)INTEFERENCE ENGINE APPLICATION

B-0252 1994-1998 148 TEETH (BEFORE VIN 1266127) INTERFERENCEENGINE APPLICATION

B-0311 1998-2001 142 TEETH (AFTER VIN 1266128) INTERFERENCEENGINE APPLICATION

B-0331 2002-2004 142 TEETH INTERFERENCE ENGINE APPLICATION9 2.7 (2673CC) SOHC ENG - 1976-79 - V6 - 88 MM Bore (262,264,265) (B27F)

Chain 3SR44 44 LINKS OIL PUMP3SR94 94 LINKS CAMSHAFT

10 2.8-6 (2849CC) SOHC ENG - 1980-90 - V6 - 90.9 MM Bore (B28F,B280F)Chain 3SR44 44 LINKS OIL PUMP

3SR94 94 LINKS CAMSHAFT

244

VOLVO (Continued)LineNo. Part Title Part No Description

11 2.9 (2917CC) DOHC ENG - 1992-05 - 6 Cyl. - 83 MM Bore(B6294S,B6294S2,B6294T,B6304F,B6304S,B6304S2) INCLUDES TRUCKSBelt B-0217 1992-1993 143 TEETH

WAUKESHAEngine Year Line Engine Year Line Engine Year Line

6 Cyl.180GLB 1

6 Cyl. (Continued)

190DLC DIESEL 26 Cyl. (Continued)

190GLB 3LineNo. Part Title Part No Description

1 180GLB ENG - 6 Cyl. - 3 1/2 BoreCrank Gear 5401 30 TEETH

2 190DLC DIESEL ENG - 6 Cyl. - 3 3/4 BoreCrank Gear 5401 30 TEETH

3 190GLB ENG - 6 Cyl. - 3 3/4 BoreCrank Gear 5401 30 TEETH

WHITE PDQ TRUCKSEngine Year Line Engine Year Line Engine Year Line

6 Cyl.170,225 1961-66 1

8 Cyl.318 1961-66 2


1 170,225 ENG - 1961-66 - 6 Cyl. - 3.40 Bore (96A,97A)3pc Set 3-495S INCLUDES [495], [S314] & [S291]Chain 495 50 LINKSCrank Sprocket S291 19 TEETH

2 318 ENG - 1961-66 - 8 Cyl. - 3.91 Bore (98A)Chain 348 68 LINKSCrank Sprocket S274 23 TEETH

WHITE TRUCKEngine Year Line Engine Year Line Engine Year Line

8 Cyl.EN601 1EN602 2

4 Cyl.134 3

8 Cyl.350 4


1 EN601 ENG - 8 Cyl. - 4.000 Bore (CHEV. ENG. 327)3pc Set 3-163S INCLUDES [163], [S288] & [S289]Chain 163 58 LINKSCam Sprocket S288 44 TEETHCrank Sprocket S289 22 TEETH

2 EN602 ENG - 8 Cyl. - 3.9375 Bore (CHEV. ENG. 366)3pc Set 3-171S INCLUDES [168], [S394] & [S395] 1969 & LATERChain 168 66 LINKS 1969 & LATERCam Sprocket S394 50 TEETH 1969 & LATERCrank Sprocket S395 25 TEETH 1969 & LATER

3 134 ENG - 4 Cyl. - 3 1/8 Bore (WILLYS ENG)Cam Gear 2900 56 TEETH FIBERCrank Gear 2901 28 TEETH

4 350 ENG - 8 Cyl. - 4.000 Bore (CHEV. ENG.)3pc Set 3-163S INCLUDES [163], [S288] & [S289]Chain 163 58 LINKSContinued on Next Page

245

WHITE TRUCK (Continued)LineNo. Part Title Part No Description

4 350 ENG - 8 Cyl. - 4.000 Bore (CHEV. ENG.) (Continued)Cam Sprocket S288 44 TEETHCrank Sprocket S289 22 TEETH

246

247

MELL-GEAR Marine

Marine Listings

Chrysler Marine

Ford Marine

Mercury Marine

OMC

248

248

249

251


A COMPANY

TM

CHRYSLER MARINEEngine Year Line Engine Year Line Engine Year Line

V8270 (4.4) 1

273 (4.5) 2

318 (5.2) 3

V8 (Continued)

340 (5.6) 4

360 (5.9) 5

383 (6.3) 6

V8 (Continued)

400 (6.6) 7

440 (7.2) 8


1 270 (4.4) ENG - V8 - 3.625 Bore (ROYAL M44S)Chain 348 68 LINKSCrank Sprocket S274 23 TEETH

2 273 (4.5) ENG - V8 - 3 5/8 Bore (175, 200, SUPERBEE)3pc Set 40406 INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN, CAST

IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK SPROCKETWITH +2°/-2° CAM ADJUSTMENT.

3 318 (5.2) ENG - V8 - 3.91 Bore (M80, M80A, 195, 195 SPECIAL, STERN DRIVE 195, 225, STERN

DRIVE 240, 915, SUPERBEE II, JET II, SUPERBEE V-DRIVE)3pc Set 40406 INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN, CAST


4 340 (5.6) ENG - V8 - 4.04 Bore (250, CHRYSLER III, SUPERBEE III, JET III, SUPERBEE V-DRIVE III)3pc Set 40406 INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN, CAST


5 360 (5.9) ENG - V8 - 4.000 Bore (CHRYSLER JET, SUPERBEE V-DRIVE III, SUPERBEE III-VOLVO)3pc Set 40406 INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN, CAST


6 383 (6.3) ENG - V8 - 4.25 Bore (M383, M383B, 260, 280)3pc Set 3-501SA INCLUDES [501], [S366] & [S367] W/SILENT TYPE CHAIN

7 400 (6.6) ENG - V8 - 4.342 Bore (280)Chain 168 66 LINKSCrank Sprocket S339 25 TEETH

8 440 (7.2) ENG - V8 - 4.320 Bore (300, 330, 335, 375)3pc Set 40217 INCLUDES .220” DOUBLE ROLLER CHAIN, CAST IRON 3 BOLT

CAM SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET WITH+2°/-2° CAM ADJUSTMENT. USE W/3 BOLT CAM

40407 INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN, CASTIRON CAM SPROCKET, 3 KEYWAY STEEL CRANK SPROCKETWITH +2°/-2° CAM ADJUSTMENT. SINGLE BOLT CAM

FORD MARINEEngine Year Line Engine Year Line Engine Year Line

V8289 (4.7) 1

302 (5.0) 2

V8 (Continued)

351W (5.8) 3

429 (7.0) 4

V8 (Continued)

460 (7.5) 5


1 289 (4.7) ENG - V8 - 4.000 Bore (BERKLEY JET DRIVE, CRUSADER, FORD MARINE, DEARBORN,

HOLMAN-MOODY, INTERCEPTOR/CONQUEROR)3pc Set 40402 INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN, CAST


248

FORD MARINE (Continued)LineNo. Part Title Part No Description

2 302 (5.0) ENG - V8 - 4.000 Bore (BERKLEY JET DRIVE, COMMANDER, CRUSADER, DEARBORN,

FORD MARINE, GLASTRON, HOLMAN-MOODY, INDMAR, MERCRUISER, OMC, OSCO, PALMER,

PLEASURECRAFT, VOLVO-PENTA, WAUKESHA, INTERCEPTOR/CONQUEROR)3pc Set 40402 INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN, CAST


3 351W (5.8) ENG - V8 - 4.000 Bore (BERKLEY JET DRIVE, COMMANDER, CRUSADER, DEARBORN,

FORD MARINE, GLASTRON, HOLMAN-MOODY, INDMAR, MERCRUISER,

INTERCEPTOR/CONQUEROR, OMC, OSCO, PALMER, PLEASURECRAFT, VOLVO-PENTA,

WAUKESHA)3pc Set 40402 INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN, CAST


4 429 (7.0) ENG - V8 - 4.360 Bore (FORD MARINE)3pc Set 40403 INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN, CAST


5 460 (7.5) ENG - V8 - 4.360 Bore (BERKLEY JET DRIVE, CHRYSLER MARINE, COMMANDER, FORD

MARINE, HARDEN, HOLMAN-MOODY, INDMAR, OMC, PLEASURECRAFT)3pc Set 40403 INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN, CAST


MERCURY MARINEEngine Year Line Engine Year Line Engine Year Line

4 Cyl.153 (2.5) 1

181 (3.0) 2

V6229 (3.8) 3

6 Cyl.250 (4.1) 4

V6262 (4.3) 5

V8283 (4.6) 6

302 (5.0) 7

305 (5.0) 8

327 (5.4) 9

V8 (Continued)

350 (5.7) 10

351W (5.8) 11

427 (7.0) 12

454 (7.4) 13

502 (8.2) 14


1 153 (2.5) ENG - 4 Cyl. - 3 7/8 Bore (MERCRUISER 120)Gear Set 2528S ALUM. CAM GEAR & STEEL CRANK GEAR

2 181 (3.0) ENG - 4 Cyl. - 4.000 Bore (MERCRUISER 140, 3.0/3.0LX)Gear Set 2528S ALUM. CAM GEAR & STEEL CRANK GEAR

3 229 (3.8) ENG - V6 - 3.736 Bore (MERCRUISER 185)3pc Set 40400 BETTER; INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,

CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANKSPROCKET WITH +2°/-2° CAM ADJUSTMENT. FOR STD. DRIVEROTATION

4 250 (4.1) ENG - 6 Cyl. - 3 7/8 Bore (MERCRUISER 160, 165)Gear Set 2528S ALUM. CAM GEAR & STEEL CRANK GEAR

5 262 (4.3) ENG - V6 - 4.000 Bore (MERCRUISER 175/4.3L, 185, 205, 205 4.3LX)3pc Set 3-509S INCLUDES [499], [S776] & [S505] STOCK REPLACEMENT TYPE 3

PC SETContinued on Next Page

249

MERCURY MARINE (Continued)LineNo. Part Title Part No Description

5 262 (4.3) ENG - V6 - 4.000 Bore (MERCRUISER 175/4.3L, 185, 205, 205 4.3LX) (Continued)3pc Set 40400 BETTER; INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,

CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANKSPROCKET WITH +2°/-2° CAM ADJUSTMENT. HIGHPERFORMANCE TYPE 3 PC SET; USE WITH FLAT LIFTER CAM;USE W/STD. DRIVE ROTATION

6 283 (4.6) ENG - V8 - 3.875 Bore (MERCRUISER 190)3pc Set 40400 BETTER; INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,


Cam Gear 2534 58 TEETH FOR REVERSE DRIVE ROTATIONCrank Gear 2535 29 TEETH FOR REVERSE DRIVE ROTATION

7 302 (5.0) ENG - V8 - 4.000 Bore (MERCRUISER 215, 225, 225S, 888)3pc Set 40402 INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN, CAST


8 305 (5.0) ENG - V8 - 3.736 Bore (MERCRUISER 200/5.0L, 228, 230/5.0L MIE, 230/5.0LX, 898,

898/198)3pc Set 40400 BETTER; INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,



9 327 (5.4) ENG - V8 - 4.000 Bore (MERCRUISER 225, 250)3pc Set 40400 BETTER; INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,



10 350 (5.7) ENG - V8 - 4.000 Bore (MERCRUISER 250, 255, 260, 260 5.7L, LX ALPHA, BRAVO, MAG

BRAVO EFI, 270, 280, 300, 320 EFI, 260 MIE, 260/5.7 MIE, 5.7 SKI, 350 MAG SKI, MAG ALPHA)3pc Set 40400 BETTER; INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,



11 351W (5.8) ENG - V8 - 4.000 Bore (MERCRUISER 233, 255)3pc Set 40402 INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN, CAST


12 427 (7.0) ENG - V8 - 4.25 Bore (MERCRUISER 325)3pc Set 40401 INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN, CAST

IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK SPROCKETWITH +2°/-2° CAM ADJUSTMENT. FOR STD. DRIVE ROTATION

250

MERCURY MARINE (Continued)LineNo. Part Title Part No Description

13 454 (7.4) ENG - V8 - 4 1/4 Bore (MERCRUISER 330, 7.4-454 BRAVO, MAG ALPHA, MAG BRAVO,

370-400-420-425-440 TRS, 450-525 SC, 330 MIE, 340 MIE, 7.4 MIE W/HURTH, 7.4 EFI MIE, 454 EFI

SKI, 350 MIE)3pc Set 40401 INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN, CAST

IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK SPROCKETWITH +2°/-2° CAM ADJUSTMENT. FOR STD. DRIVE ROTATIONEXCLUDES ROLLER CAM APPLICATIONS

14 502 (8.2) ENG - V8 - 4.466 Bore (MERCRUISER 465, 500, 502 MAG BRAVO, 502 EFI, 600 SC & 8.2L

MIE)3pc Set 40401 INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN, CAST


OMCEngine Year Line Engine Year Line Engine Year Line

4 Cyl.153 (2.5) 1

181 (3.0) 2

V6225 (3.7) 3

6 Cyl.250 (4.1) 4

V8283 (4.6) 5

8 Cyl.300 (4.9) 6

V8302 (5.0) 7

307 (5.0) 8

350 (5.7) 9

351W (5.8) 10


1 153 (2.5) ENG - 4 Cyl. - 3 7/8 Bore (OMC 100, 110, 120)Gear Set 2528S ALUM. CAM GEAR & STEEL CRANK GEAR

2 181 (3.0) ENG - 4 Cyl. - 4.000 Bore (OMC 140)Gear Set 2528S ALUM. CAM GEAR & STEEL CRANK GEAR

3 225 (3.7) ENG - V6 - 3.75 Bore (OMC 150, 155)3pc Set 3-359S INCLUDES [359], [S334] & [S323]Chain 359 54 LINKSCam Sprocket S334 40 TEETHCrank Sprocket S323 20 TEETH

4 250 (4.1) ENG - 6 Cyl. - 3.875 Bore (OMC 165)Gear Set 2528S ALUM. CAM GEAR & STEEL CRANK GEAR

5 283 (4.6) ENG - V8 - 3 7/8 Bore (OMC 185)3pc Set 40400 BETTER; INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,



6 300 (4.9) ENG - 8 Cyl. - 3 3/4 Bore (OMC 170, 200)3pc Set 3-359S INCLUDES [359], [S334] & [S323]Chain 359 54 LINKSCam Sprocket S334 40 TEETHCrank Sprocket S323 20 TEETH

7 302 (5.0) ENG - V8 - 4.000 Bore (OMC 170, 175, 190)3pc Set 40402 INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN, CAST


251

OMC (Continued)LineNo. Part Title Part No Description

8 307 (5.0) ENG - V8 - 3 7/8 Bore (OMC 210, 215, 225, 230, 235, 245)3pc Set 40400 BETTER; INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,

CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANKSPROCKET WITH +2°/-2° CAM ADJUSTMENT. STD.ROTATION


9 350 (5.7) ENG - V8 - 4.000 Bore (OMC 250, 260, 290)3pc Set 40400 BETTER; INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,

CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANKSPROCKET WITH +2°/-2° CAM ADJUSTMENT. STD. ROTATION


10 351W (5.8) ENG - V8 - 4.000 Bore (OMC 235, 240)3pc Set 40402 INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN, CAST


252

WARRANTY DISCLAIMER

PREMIUM PERFORMANCE PARTS

DUE TO INTENDED USAGE OF PERFORMANCE APPLICATIONS, THE PARTS IN THIS CATALOG ARE

SOLD WITHOUT ANY EXPRESS WARRANTY OR IMPLIED WARRANTY OR MERCHANTABILITY OR

FITNESS FOR THE INTENDED PURPOSE. INSTALLATION OF PARTS INTENDED FOR “OFF

HIGHWAY” USE. INSTALLATION OF THESE PARTS COULD AFFECT THE VEHICLE MANUFACTURER

WARRANTY COVERAGE.

The Melling engine Parts warranty does not consider low or no oil pressure grounds for

extensive engine repairs nor complete replacement of damaged engines. This consideration is

based on the fact that all vehicles have as standard equipment, either warning lights or

gauges, which is to warn the operator of low oil pressure, low oil level or no oil pressure prior

to the occurrence of the engine damage. If an operator chooses to ignore these gauges or

warning lights or if the gauges or warning lights are not in operating condition, this constitutes

negligence on the operators part. Therefore Melling Engine Parts cannot be responsible for

the cost of these extensive damages.

NOTE: it is illegal to use some Melling performance parts in vehicles that are operated on the

public streets and highways of California. Various other federal and state laws may limit the

use of these parts to “off highway” applications only. Check application fitment notes in the

Melling catalog and also current state and federal laws to be sure.Melling catalog and also current state and federal laws to be sure.

253

High Performance Automotive Listings

Buick

Cadillac

Chevrolet Cars & Trucks

Chrysler Products

Ford Products & Trucks

Hummer

Isuzu

Oldsmobile

Pontiac

Saab

256

257

257

269

271

275

275

276

277

279

254


A COMPANY

Series

Melling

Part

Number Application

*Single

Roller

Chain

*Double

Roller

Chain Silent

Cast Iron

Cam

Sprocket

Steel

Cam

Sprocket

Steel

Crank

Sprocket

Single

Keyway

402 40201 Chevrolet S.B (Without Stock Roller Camshaft) .200" x x

402 40202 Chrysler S.B. .200" x x

402 40203 Chrysler B.B. (With 1 Bolt Camshaft) .220" x x

402 40204 Ford B.B .220" x x

402 40205 Chevrolet B.B. .220" x x

402 40206 Ford S.B. .200" x x


404 40400 Chevrolet S.B. (Without Stock Roller Camshaft) .250" x x

404 40401 Chevrolet B.B. .250" x x

404 40402 Ford S.B. .250" x x

404 40403 Ford B.B. .250" x x

404 40404 Buick V6 .250" x x

404 40405 Ford B.B. .250" x x

404 40406 Chrysler S.B. .250" x x


404 40408 Pontiac B.B. .250" x x

404 40409 Oldsmobile B.B. .250" x x

404 40410 Ford B.B. .250" x x


405 40510 Chevrolet B.B. .335" x x


485 48500T-9 Chevrolet S.B. (Without Stock Roller Camshaft) .250" x x

485 48500W-9 Chevrolet S.B. (Without Stock Roller Camshaft) .250" x x

485 48510T-9 Chevrolet S.B. (Without Stock Roller Camshaft) .250" x x

485 48510W-9 Chevrolet S.B. (Without Stock Roller Camshaft) .250" x x

485 48520T-9 Ford S.B. .250" x x

485 48520W-9 Ford S.B. .250" x x

485 48530T-9 Ford S.B. .250" x x

485 48551T-9 Ford S.B. .250" x x

485 48560T-9 Chevrolet LS .250" x x

485 48561T-9 Chevrolet LS .250" x x

Performance Timing SetsG

oo

dB

ett

er

Be

st

484 48400 Chevrolet S.B. (Without Stock Roller Camshaft) x x x

484 48410 Chevrolet S.B. (Without Stock Roller Camshaft) x x x

484 48420 Ford S.B. x x

484 48430 Ford S.B. x x

484 48450 Chevrolet S.B. (Without Stock Roller Camshaft) x x

484 48400Q Chevrolet S.B. (Without Stock Roller Camshaft) x x x

484 48410Q Chevrolet S.B. (Without Stock Roller Camshaft) x x x

*Chain Roller Diameter "W" Suffix = Bronze Washer

"Q" Suffix = Quiet "T" Suffix = Torrington Bearing

Check Mell-GEAR Catalog For More Detailed Application Information

Ge

ar

Dri

ve

255

LineNo. Part Title Part No. Description

PERFORMANCE - BUICK

1 3.0-E (181) ENG - 1982-85 - V6 - 3.800 Bore3pc Set 40404 1982-1984 DO NOT USE DAMPER WITH THIS SET

INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANKSPROCKET WITH +2°/-2° CAM ADJUSTMENT.

2 3.8 (231) OHV ENG - 1977-87 - V6 - 3.78, 3.80 Bore3pc Set 40404 DO NOT USE DAMPER WITH THIS SET INCLUDES .250”

DOUBLE SEAMLESS ROLLER CHAIN, CAST IRON CAMSPROCKET, 3 KEYWAY STEEL CRANK SPROCKET WITH+2°/-2° CAM ADJUSTMENT.

3 4.1-4 (252) OHV ENG - 1980-84 - V6 - 3.97 Bore3pc Set 40404 DO NOT USE A DAMPER WITH THIS SET INCLUDES

.250” DOUBLE SEAMLESS ROLLER CHAIN, CAST IRONCAM SPROCKET, 3 KEYWAY STEEL CRANK SPROCKETWITH +2°/-2° CAM ADJUSTMENT.

4 4.4-J (267) ENG - 1981-82 - V8 - 3.50 Bore3pc Set 48500T-9 BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLER

CHAIN; BILLET STEEL CAM SPROCKET; 9 KEYWAYSTEEL CRANK SPROCKET WITH +4°/-4° CAMADJUSTMENT; PRESS FIT ROLLER THRUST BEARING

48500W-9 BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLERCHAIN, BILLET STEEL CAM SPROCKET, 9 KEYWAYSTEEL CRANK SPROCKET WITH +4°/-4° CAMADJUSTMENT, BRONZE WASHER.

5 5.0-G,H,U (305) ENG - 1977-87 - V8 - 3.736 Bore3pc Set 48500T-9 BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLER



6 5.3-C,M,P (325) ENG - 2004-09 - V8 - 3.78 Bore3pc Set 48560T-9 2004-2007 RANIER INCLUDES .250” SINGLE ROLLER

CHAIN, BILLET STEEL CAM SPROCKET, 9 KEYWAYSTEEL CRANK SPROCKET WITH +4°/-4° CAMADJUSTMENT, PRESS FIT ROLLER THRUST BEARING

48561T-9 2004-2007 RANIER INCLUDES .250” DOUBLE SEAMLESSROLLER CHAIN, BILLET STEEL CAM SPROCKET, 9KEYWAY STEEL CRANK SPROCKET WITH +4°/-4° CAMADJUSTMENT, PRESS FIT ROLLER THRUST BEARING

7 5.7-L (350) ENG - 1977-79 - V8 - 4.000 Bore3pc Set 48500T-9 BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLER



256


PERFORMANCE - BUICK (Continued)

8 350 B,H,J,X ENG - 1972-81 - 8 Cyl. - 3.800 Bore3pc Set 40210 INCLUDES ROLLER CHAIN, CAST IRON CAM

SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET


PERFORMANCE - CADILLAC

1 5.3-T (323) OHV ENG - 2002-05 - 8 Cyl. - 3.78 Bore3pc Set 48560T-9 INCLUDES .250” SINGLE ROLLER CHAIN, BILLET STEEL

CAM SPROCKET, 9 KEYWAY STEEL CRANK SPROCKETWITH +4°/-4° CAM ADJUSTMENT, PRESS FIT ROLLERTHRUST BEARING

48561T-9 INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,BILLET STEEL CAM SPROCKET, 9 KEYWAY STEELCRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT,PRESS FIT ROLLER THRUST BEARING

2 5.7-S (346) OHV ENG - 2004-05 - 8 Cyl. - 3.90 Bore3pc Set 48560T-9 INCLUDES .250” SINGLE ROLLER CHAIN, BILLET STEEL



3 6.0-N,U (364) OHV ENG - 2002-07 - 8 Cyl. - 4.00 Bore3pc Set 48560T-9 2002-2006 ESCALADE INCLUDES .250” SINGLE ROLLER

CHAIN, BILLET STEEL CAM SPROCKET, 9 KEYWAYSTEEL CRANK SPROCKET WITH +4°/-4° CAMADJUSTMENT, PRESS FIT ROLLER THRUST BEARING

48561T-9 2002-2006 ESCALADE INCLUDES .250” DOUBLESEAMLESS ROLLER CHAIN, BILLET STEEL CAMSPROCKET, 9 KEYWAY STEEL CRANK SPROCKET WITH+4°/-4° CAM ADJUSTMENT, PRESS FIT ROLLER THRUSTBEARING


PERFORMANCE - CHEVROLET CARS & TRUCKS

1 200 ENG - 1978-79 - V6 - 3.50 Bore3pc Set 48500T-9 BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLER



2 229 ENG - 1980-1984 - V6 - 3.736 Bore3pc Set 48500T-9 BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLER



257


PERFORMANCE - CHEVROLET CARS & TRUCKS (Continued)

2 229 ENG - 1980-1984 - V6 - 3.736 Bore3pc Set 48500W-9 BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLER

CHAIN, BILLET STEEL CAM SPROCKET, 9 KEYWAYSTEEL CRANK SPROCKET WITH +4°/-4° CAMADJUSTMENT, BRONZE WASHER.

3 262 ENG - 1975-76 - 8 Cyl. - 3.67 Bore3pc Set 40201 EXCLUDES STOCK ROLLER CAM ENGINES GOOD;

INCLUDES .200” DOUBLE ROLLER CHAIN, CAST IRONCAM SPROCKET, 3 KEYWAY CRANK SPROCKET WITH+2°/-2° CAM ADJUSTMENT.

40400 EXCLUDES STOCK ROLLER CAM ENGINES. BETTER;INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANKSPROCKET WITH +2°/-2° CAM ADJUSTMENT.

48500T-9 BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLERCHAIN; BILLET STEEL CAM SPROCKET; 9 KEYWAYSTEEL CRANK SPROCKET WITH +4°/-4° CAMADJUSTMENT; PRESS FIT ROLLER THRUST BEARING


40520 EXCLUDING ROLLER CAM ENGINES, RACINGAPPLICATIONS ONLY BETTER; NCLUDES .375” HY-VOTEC SILENT CHAIN, CAST IRON CAM SPROCKET, 9KEYWAY STEEL CRANK SPROCKET WITH +4°/-4° CAMADJUSTMENT.

4 262 ENG - 1985-04 - V6 - 4.0 Bore3pc Set 40201 1985-1985 EXC STOCK ROLLER CAM ENGINES GOOD;


40400 EXC STOCK ROLLER CAM ENGS. INCLUDES TRUCKSNON RACING APPLICATIONS ONLY BETTER; INCLUDES.250” DOUBLE SEAMLESS ROLLER CHAIN, CAST IRONCAM SPROCKET, 3 KEYWAY STEEL CRANK SPROCKETWITH +2°/-2° CAM ADJUSTMENT.

48500T-9 1985-1986 TRUCKS ONLY. BEST; INCLUDES .250”DOUBLE SEAMLESS ROLLER CHAIN; BILLET STEELCAM SPROCKET; 9 KEYWAY STEEL CRANK SPROCKETWITH +4°/-4° CAM ADJUSTMENT; PRESS FIT ROLLERTHRUST BEARING

48500T-9 1985-1993 CARS ONLY. BEST; INCLUDES .250” DOUBLESEAMLESS ROLLER CHAIN; BILLET STEEL CAMSPROCKET; 9 KEYWAY STEEL CRANK SPROCKET WITH+4°/-4° CAM ADJUSTMENT; PRESS FIT ROLLER THRUSTBEARING

48500W-9 1985-1986 TRUCKS ONLY BEST; INCLUDES .250”DOUBLE SEAMLESS ROLLER CHAIN, BILLET STEELCAM SPROCKET, 9 KEYWAY STEEL CRANK SPROCKETWITH +4°/-4° CAM ADJUSTMENT, BRONZE WASHER.


258



4 262 ENG - 1985-04 - V6 - 4.0 Bore3pc Set 48500W-9 1985-1993 CARS ONLY BEST; INCLUDES .250” DOUBLE

SEAMLESS ROLLER CHAIN, BILLET STEEL CAMSPROCKET, 9 KEYWAY STEEL CRANK SPROCKET WITH+4°/-4° CAM ADJUSTMENT, BRONZE WASHER.

40520 EXC. ROLLER CAM. TRUCK RACING APPLICATIONSONLY. BETTER; NCLUDES .375” HY-VO TEC SILENTCHAIN, CAST IRON CAM SPROCKET, 9 KEYWAY STEELCRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT.

5 265 ENG - 1955-57 - 8 Cyl. - 3.75 Bore3pc Set 48500T-9 BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLER



6 267 ENG - 1979-82 - 8 Cyl. - 3.50 Bore3pc Set 40201 EXCLUDING STOCK ROLLER CAM ENGINES GOOD;


40400 EXCLUDING STOCK ROLLER CAM ENGINES BETTER;INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANKSPROCKET WITH +2°/-2° CAM ADJUSTMENT.

40500 EXCLUDING STOCK ROLLER CAM ENGINES INCLUDES.335” SINGLE SEAMLESS ROLLER CHAIN, CAST IRONCAM SPROCKET, 3 KEYWAY STEEL CRANK SPROCKETWITH +2°/-2° CAM ADJUSTMENT.



40520 EXCLUDING ROLLER CAM ENGINES; RACINGAPPLICATIONS ONLY BETTER; NCLUDES .375” HY-VOTEC SILENT CHAIN, CAST IRON CAM SPROCKET, 9KEYWAY STEEL CRANK SPROCKET WITH +4°/-4° CAMADJUSTMENT.

7 283 ENG - 1957-67 - 8 Cyl. - 3 7/8 Bore3pc Set 40201 1959-1967 EXCLUDING STOCK ROLLER CAM ENGINES;

TRUCK APPLICATIONS ONLY GOOD; INCLUDES .200”DOUBLE ROLLER CHAIN, CAST IRON CAM SPROCKET,3 KEYWAY CRANK SPROCKET WITH +2°/-2° CAMADJUSTMENT.


259



7 283 ENG - 1957-67 - 8 Cyl. - 3 7/8 Bore3pc Set 40201 1967-1967 EXCLUDES STOCK ROLLER CAM ENGINES;

CAR APPLICATIONS ONLY GOOD; INCLUDES .200”DOUBLE ROLLER CHAIN, CAST IRON CAM SPROCKET,3 KEYWAY CRANK SPROCKET WITH +2°/-2° CAMADJUSTMENT.

40400 1959-1967 EXCLUDING STOCK ROLLER CAM ENGINES.TRUCKS ONLY. BETTER; INCLUDES .250” DOUBLESEAMLESS ROLLER CHAIN, CAST IRON CAMSPROCKET, 3 KEYWAY STEEL CRANK SPROCKET WITH+2°/-2° CAM ADJUSTMENT.

40400 1967-1967 EXCLUDES STOCK ROLLER CAM ENGINES.CAR APPLICATIONS ONLY. BETTER; INCLUDES .250”DOUBLE SEAMLESS ROLLER CHAIN, CAST IRON CAMSPROCKET, 3 KEYWAY STEEL CRANK SPROCKET WITH+2°/-2° CAM ADJUSTMENT.

40500 1959-1967 EXCLUDING STOCK ROLLER CAM ENGINES.TRUCKS ONLY. INCLUDES .335” SINGLE SEAMLESSROLLER CHAIN, CAST IRON CAM SPROCKET, 3KEYWAY STEEL CRANK SPROCKET WITH +2°/-2° CAMADJUSTMENT.

40500 1967-1967 EXCLUDES STOCK ROLLER CAM ENGINES.CAR APPLICATIONS ONLY. INCLUDES .335” SINGLESEAMLESS ROLLER CHAIN, CAST IRON CAMSPROCKET, 3 KEYWAY STEEL CRANK SPROCKET WITH+2°/-2° CAM ADJUSTMENT.

48500T-9 1959-1967 TRUCKS ONLY. BEST; INCLUDES .250”DOUBLE SEAMLESS ROLLER CHAIN; BILLET STEELCAM SPROCKET; 9 KEYWAY STEEL CRANK SPROCKETWITH +4°/-4° CAM ADJUSTMENT; PRESS FIT ROLLERTHRUST BEARING

48500T-9 1967-1967 CAR APPLICATIONS ONLY. BEST; INCLUDES.250” DOUBLE SEAMLESS ROLLER CHAIN; BILLETSTEEL CAM SPROCKET; 9 KEYWAY STEEL CRANKSPROCKET WITH +4°/-4° CAM ADJUSTMENT; PRESSFIT ROLLER THRUST BEARING

48500W-9 1959-1967 TRUCKS ONLY. BEST; INCLUDES .250”DOUBLE SEAMLESS ROLLER CHAIN, BILLET STEELCAM SPROCKET, 9 KEYWAY STEEL CRANK SPROCKETWITH +4°/-4° CAM ADJUSTMENT, BRONZE WASHER.

48500W-9 1967-1967 CAR APPLICATIONS ONLY BEST; INCLUDES.250” DOUBLE SEAMLESS ROLLER CHAIN, BILLETSTEEL CAM SPROCKET, 9 KEYWAY STEEL CRANKSPROCKET WITH +4°/-4° CAM ADJUSTMENT, BRONZEWASHER.

40520 1959-1967 RACING APPLICATIONS ONLY. EXCLUDINGSTOCK ROLLER CAM ENGINES. TRUCKS ONLY.BETTER; NCLUDES .375” HY-VO TEC SILENT CHAIN,CAST IRON CAM SPROCKET, 9 KEYWAY STEEL CRANKSPROCKET WITH +4°/-4° CAM ADJUSTMENT.


260



7 283 ENG - 1957-67 - 8 Cyl. - 3 7/8 Bore3pc Set 40520 1967-1967 RACING APPLICATIONS ONLY. EXCLUDES

STOCK ROLLER CAM ENGINES. CAR APPLICATIONSONLY. BETTER; NCLUDES .375” HY-VO TEC SILENTCHAIN, CAST IRON CAM SPROCKET, 9 KEYWAY STEELCRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT.

8 4.8-A,C,V (294) ENG - 1999-13 - 8 Cyl. - 3.78 Bore3pc Set 48560T-9 1999-2006 INCLUDES .250” SINGLE ROLLER CHAIN,

BILLET STEEL CAM SPROCKET, 9 KEYWAY STEELCRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT,PRESS FIT ROLLER THRUST BEARING

48560T-9 2007-2007 EXPRESS 2500, SAVANA 2500 & SAVANA 3500INCLUDES .250” SINGLE ROLLER CHAIN, BILLET STEELCAM SPROCKET, 9 KEYWAY STEEL CRANK SPROCKETWITH +4°/-4° CAM ADJUSTMENT, PRESS FIT ROLLERTHRUST BEARING

48561T-9 1999-2006 INCLUDES .250” DOUBLE SEAMLESSROLLER CHAIN, BILLET STEEL CAM SPROCKET, 9KEYWAY STEEL CRANK SPROCKET WITH +4°/-4° CAMADJUSTMENT, PRESS FIT ROLLER THRUST BEARING

48561T-9 2007-2007 EXPRESS 2500, SAVANA 2500 & SAVANA 3500INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,BILLET STEEL CAM SPROCKET, 9 KEYWAY STEELCRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT,PRESS FIT ROLLER THRUST BEARING

9 302 ENG - 1967-69 - 8 Cyl. 4.00 Bore3pc Set 40201 CAMARO; EXCLUDES STOCK ROLLER CAM ENGINES

GOOD; INCLUDES .200” DOUBLE ROLLER CHAIN, CASTIRON CAM SPROCKET, 3 KEYWAY CRANK SPROCKETWITH +2°/-2° CAM ADJUSTMENT.

40400 EXCLUDES STOCK ROLLER CAM ENGINES BETTER;INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANKSPROCKET WITH +2°/-2° CAM ADJUSTMENT.

40500 EXCLUDES STOCK ROLLER CAM ENGINES INCLUDES.335” SINGLE SEAMLESS ROLLER CHAIN, CAST IRONCAM SPROCKET, 3 KEYWAY STEEL CRANK SPROCKETWITH +2°/-2° CAM ADJUSTMENT.



40520 EXCLUDES STOCK ROLLER CAM ENGINES. RACINGAPPLICATIONS ONLY BETTER; NCLUDES .375” HY-VOTEC SILENT CHAIN, CAST IRON CAM SPROCKET, 9KEYWAY STEEL CRANK SPROCKET WITH +4°/-4° CAMADJUSTMENT.

261



10 305 ENG - 1976-93 - 8 Cyl. - 3.74 Bore3pc Set 40201 1982-1987 EXCLUDING STOCK ROLLER CAM ENGINES


40400 1982-1987 EXCLUDING STOCK ROLLER CAM ENGINESBETTER; INCLUDES .250” DOUBLE SEAMLESS ROLLERCHAIN, CAST IRON CAM SPROCKET, 3 KEYWAY STEELCRANK SPROCKET WITH +2°/-2° CAM ADJUSTMENT.

40500 1982-1987 EXCLUDING STOCK ROLLER CAM ENGINESINCLUDES .335” SINGLE SEAMLESS ROLLER CHAIN,CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANKSPROCKET WITH +2°/-2° CAM ADJUSTMENT.

48500T-9 EXC. VIN E AND CA EMISSIONS. BEST; INCLUDES .250”DOUBLE SEAMLESS ROLLER CHAIN; BILLET STEELCAM SPROCKET; 9 KEYWAY STEEL CRANK SPROCKETWITH +4°/-4° CAM ADJUSTMENT; PRESS FIT ROLLERTHRUST BEARING

48500W-9 EXCLUDES VIN E AND CA EMISSIONS BEST; INCLUDES.250” DOUBLE SEAMLESS ROLLER CHAIN, BILLETSTEEL CAM SPROCKET, 9 KEYWAY STEEL CRANKSPROCKET WITH +4°/-4° CAM ADJUSTMENT, BRONZEWASHER.

40520 1982-1987 EXCLUDING STOCK ROLLER CAM ENGINES.RACING APPLICATIONS ONLY. BETTER; NCLUDES .375”HY-VO TEC SILENT CHAIN, CAST IRON CAMSPROCKET, 9 KEYWAY STEEL CRANK SPROCKET WITH+4°/-4° CAM ADJUSTMENT.



40400 EXCLUDING STOCK ROLLER CAM ENGINES BETTER;INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANKSPROCKET WITH +2°/-2° CAM ADJUSTMENT.

40500 EXCLUDING STOCK ROLLER CAM ENGINES INCLUDES.335” SINGLE SEAMLESS ROLLER CHAIN, CAST IRONCAM SPROCKET, 3 KEYWAY STEEL CRANK SPROCKETWITH +2°/-2° CAM ADJUSTMENT.



40520 EXCLUDING STOCK ROLLER CAM ENGINES. RACINGAPPLICATIONS ONLY. BETTER; NCLUDES .375” HY-VOTEC SILENT CHAIN, CAST IRON CAM SPROCKET, 9KEYWAY STEEL CRANK SPROCKET WITH +4°/-4° CAMADJUSTMENT.

262



12 5.3 (323,325) ENG - 1999-14 - 8 Cyl. - 3.78 Bore3pc Set 48560T-9 2005-2006 VIN M; TRAILBLAZER & ENVOY INCLUDES

.250” SINGLE ROLLER CHAIN, BILLET STEEL CAMSPROCKET, 9 KEYWAY STEEL CRANK SPROCKET WITH+4°/-4° CAM ADJUSTMENT, PRESS FIT ROLLER THRUSTBEARING

48560T-9 2005-2007 VIN B,T,Z; AVALANCHE, EXPRESS, SAVANA,SIERRA, SILVERADO, SUBURBAN, TAHOE, YUKON,YUKON XL & ESCALADE INCLUDES .250” SINGLEROLLER CHAIN, BILLET STEEL CAM SPROCKET, 9KEYWAY STEEL CRANK SPROCKET WITH +4°/-4° CAMADJUSTMENT, PRESS FIT ROLLER THRUST BEARING

48560T-9 1999-2004 FITS ALL INCLUDES .250” SINGLE ROLLERCHAIN, BILLET STEEL CAM SPROCKET, 9 KEYWAYSTEEL CRANK SPROCKET WITH +4°/-4° CAMADJUSTMENT, PRESS FIT ROLLER THRUST BEARING

48561T-9 1999-2004 FITS ALL INCLUDES .250” DOUBLESEAMLESS ROLLER CHAIN, BILLET STEEL CAMSPROCKET, 9 KEYWAY STEEL CRANK SPROCKET WITH+4°/-4° CAM ADJUSTMENT, PRESS FIT ROLLER THRUSTBEARING

48561T-9 2005-2006 2005-06 VIN M TRAILBLAZER & ENVOYINCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,BILLET STEEL CAM SPROCKET, 9 KEYWAY STEELCRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT,PRESS FIT ROLLER THRUST BEARING

48561T-9 2005-2007 VIN B,T,Z; AVALANCHE, EXPRESS, SAVANA,SIERRA, SILVERADO, SUBURBAN, TAHOE, YUKON,YUKON XL 1500 INCLUDES .250” DOUBLE SEAMLESSROLLER CHAIN, BILLET STEEL CAM SPROCKET, 9KEYWAY STEEL CRANK SPROCKET WITH +4°/-4° CAMADJUSTMENT, PRESS FIT ROLLER THRUST BEARING



40400 EXCLUDING STOCK ROLLER CAM ENGINES. BETTER;INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANKSPROCKET WITH +2°/-2° CAM ADJUSTMENT.

40500 EXCLUDING STOCK ROLLER CAM ENGINES. INCLUDES.335” SINGLE SEAMLESS ROLLER CHAIN, CAST IRONCAM SPROCKET, 3 KEYWAY STEEL CRANK SPROCKETWITH +2°/-2° CAM ADJUSTMENT.




263



13 327 ENG - 1962-69 - 8 Cyl. - 4.00 Bore3pc Set 40520 EXCLUDING STOCK ROLLER CAM ENGINES. RACING

APPLICATIONS ONLY BETTER; NCLUDES .375” HY-VOTEC SILENT CHAIN, CAST IRON CAM SPROCKET, 9KEYWAY STEEL CRANK SPROCKET WITH +4°/-4° CAMADJUSTMENT.

14 350 ENG - 1967-97 - 8 Cyl. - 4.00 Bore3pc Set 40201 1969-1992 EXCLUDES STOCK ROLLER CAM ENGINES;

CAR APPLICATIONS ONLY GOOD; INCLUDES .200”DOUBLE ROLLER CHAIN, CAST IRON CAM SPROCKET,3 KEYWAY CRANK SPROCKET WITH +2°/-2° CAMADJUSTMENT.


40500 1969-1992 EXCLUDING STOCK ROLLER CAM ENGINES.INCLUDES .335” SINGLE SEAMLESS ROLLER CHAIN,CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANKSPROCKET WITH +2°/-2° CAM ADJUSTMENT.

48500T-9 1967-1988 BEST; INCLUDES .250” DOUBLE SEAMLESSROLLER CHAIN; BILLET STEEL CAM SPROCKET; 9KEYWAY STEEL CRANK SPROCKET WITH +4°/-4° CAMADJUSTMENT; PRESS FIT ROLLER THRUST BEARING

48500W-9 1967-1988 BEST; INCLUDES .250” DOUBLE SEAMLESSROLLER CHAIN, BILLET STEEL CAM SPROCKET, 9KEYWAY STEEL CRANK SPROCKET WITH +4°/-4° CAMADJUSTMENT, BRONZE WASHER.

40520 1969-1992 EXCLUDING STOCK ROLLER CAM ENGINES.RACING APPLICATIONS ONLY BETTER; NCLUDES .375”HY-VO TEC SILENT CHAIN, CAST IRON CAMSPROCKET, 9 KEYWAY STEEL CRANK SPROCKET WITH+4°/-4° CAM ADJUSTMENT.

15 350 ENG - 1969-02 - 8 Cyl. - 4.00 Bore3pc Set 40201 1969-1992 EXCLUDES STOCK ROLLER CAM ENGINES



40500 1969-1992 EXCLUDING STOCK ROLLER CAM ENGINES.INCLUDES .335” SINGLE SEAMLESS ROLLER CHAIN,CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANKSPROCKET WITH +2°/-2° CAM ADJUSTMENT.

48500T-9 1969-1996 BEST; INCLUDES .250” DOUBLE SEAMLESSROLLER CHAIN; BILLET STEEL CAM SPROCKET; 9KEYWAY STEEL CRANK SPROCKET WITH +4°/-4° CAMADJUSTMENT; PRESS FIT ROLLER THRUST BEARING



264



15 350 ENG - 1969-02 - 8 Cyl. - 4.00 Bore3pc Set 40520 1969-1992 EXCLUDING STOCK ROLLER CAM ENGINES.

RACING APPLICATIONS ONLY BETTER; NCLUDES .375”HY-VO TEC SILENT CHAIN, CAST IRON CAMSPROCKET, 9 KEYWAY STEEL CRANK SPROCKET WITH+4°/-4° CAM ADJUSTMENT.

16 5.7-G,S (350) ENG - 1997-2005 - 8 Cyl. - 4.000 Bore3pc Set 48560T-9 INCLUDES .250” SINGLE ROLLER CHAIN, BILLET STEEL



17 6.0-U (364) OHV ENG - 2005-07 - 8 Cyl. - 4.00 Bore3pc Set 48560T-9 2005-2005 INCLUDES .250” SINGLE ROLLER CHAIN,



18 6.0 (364) ENG - 1999-14 - 8 Cyl. - 4.00 Bore3pc Set 48560T-9 1999-2006 INCLUDES .250” SINGLE ROLLER CHAIN,


48560T-9 2007-2007 EXPRESS 2500, EXPRESS 3500, SAVANA2500, SAVANA 3500 INCLUDES .250” SINGLE ROLLERCHAIN, BILLET STEEL CAM SPROCKET, 9 KEYWAYSTEEL CRANK SPROCKET WITH +4°/-4° CAMADJUSTMENT, PRESS FIT ROLLER THRUST BEARING


48561T-9 2007-2007 EXPRESS 2500, EXPRESS 3500, SAVANA2500, SAVANA 3500 INCLUDES .250” DOUBLESEAMLESS ROLLER CHAIN, BILLET STEEL CAMSPROCKET, 9 KEYWAY STEEL CRANK SPROCKET WITH+4°/-4° CAM ADJUSTMENT, PRESS FIT ROLLER THRUSTBEARING

19 400 S.B. ENG - 1970-80 - 8 Cyl. - 4 1/8 Bore3pc Set 40201 1970-1976 EXCLUDING STOCK ROLLER CAM ENGINES;

SMALL BLOCK CAR APPLICATIONS ONLY GOOD;INCLUDES .200” DOUBLE ROLLER CHAIN, CAST IRONCAM SPROCKET, 3 KEYWAY CRANK SPROCKET WITH+2°/-2° CAM ADJUSTMENT.


265



19 400 S.B. ENG - 1970-80 - 8 Cyl. - 4 1/8 Bore3pc Set 40201 1974-1980 EXCLUDING STOCK ROLLER CAM ENGINES;

SMALL BLOCK TRUCK APPLICATIONS ONLY GOOD;INCLUDES .200” DOUBLE ROLLER CHAIN, CAST IRONCAM SPROCKET, 3 KEYWAY CRANK SPROCKET WITH+2°/-2° CAM ADJUSTMENT.

40400 1970-1976 EXCLUDING STOCK ROLLER CAM ENGINES.SMALL BLOCK CAR APPLICATIONS ONLY. BETTER;INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANKSPROCKET WITH +2°/-2° CAM ADJUSTMENT.

40400 1974-1980 EXCLUDING STOCK ROLLER CAM ENGINES.SMALL BLOCK TRUCK APPLICATIONS ONLY. BETTER;INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANKSPROCKET WITH +2°/-2° CAM ADJUSTMENT.

40500 1970-1976 EXCLUDING STOCK ROLLER CAM ENGINES.SMALL BLOCK CAR APPLICATIONS ONLY INCLUDES.335” SINGLE SEAMLESS ROLLER CHAIN, CAST IRONCAM SPROCKET, 3 KEYWAY STEEL CRANK SPROCKETWITH +2°/-2° CAM ADJUSTMENT.

40500 1974-1980 EXCLUDING STOCK ROLLER CAM ENGINES.SMALL BLOCK TRUCK APPLICATIONS ONLY INCLUDES.335” SINGLE SEAMLESS ROLLER CHAIN, CAST IRONCAM SPROCKET, 3 KEYWAY STEEL CRANK SPROCKETWITH +2°/-2° CAM ADJUSTMENT.

48500T-9 1970-1976 SMALL BLOCK CAR APPLICATIONS ONLYBEST; INCLUDES .250” DOUBLE SEAMLESS ROLLERCHAIN; BILLET STEEL CAM SPROCKET; 9 KEYWAYSTEEL CRANK SPROCKET WITH +4°/-4° CAMADJUSTMENT; PRESS FIT ROLLER THRUST BEARING

48500W-9 1970-1976 SMALL BLOCK CAR APPLICATIONS ONLYBEST; INCLUDES .250” DOUBLE SEAMLESS ROLLERCHAIN, BILLET STEEL CAM SPROCKET, 9 KEYWAYSTEEL CRANK SPROCKET WITH +4°/-4° CAMADJUSTMENT, BRONZE WASHER.

48500W-9 1974-1980 SMALL BLOCK TRUCK APPLICATIONS ONLYBEST; INCLUDES .250” DOUBLE SEAMLESS ROLLERCHAIN, BILLET STEEL CAM SPROCKET, 9 KEYWAYSTEEL CRANK SPROCKET WITH +4°/-4° CAMADJUSTMENT, BRONZE WASHER.

40520 1970-1976 EXCLUDING STOCK ROLLER CAM ENGINES.SMALL BLOCK CAR RACING APPLICATIONS ONLYBETTER; NCLUDES .375” HY-VO TEC SILENT CHAIN,CAST IRON CAM SPROCKET, 9 KEYWAY STEEL CRANKSPROCKET WITH +4°/-4° CAM ADJUSTMENT.

40520 1974-1980 EXCLUDING STOCK ROLLER CAM ENGINES.SMALL BLOCK TRUCK RACING APPLICATIONS ONLYBETTER; NCLUDES .375” HY-VO TEC SILENT CHAIN,CAST IRON CAM SPROCKET, 9 KEYWAY STEEL CRANKSPROCKET WITH +4°/-4° CAM ADJUSTMENT.

266



20 396 ENG - 1965-70 - 8 Cyl. - 4.09 Bore3pc Set 40205 INCLUDES .220” DOUBLE ROLLER CHAIN, CAST IRON

CAM SPROCKET, 3 KEYWAY STEEL CRANK SPROCKETWITH +2°/-2° CAM ADJUSTMENT.

40401 CAR AND TRUCK APPLICATIONS. INCLUDES .250”DOUBLE SEAMLESS ROLLER CHAIN, CAST IRON CAMSPROCKET, 3 KEYWAY STEEL CRANK SPROCKET WITH+2°/-2° CAM ADJUSTMENT.

40510 INCLUDES SEAMLESS SINGLE SOLID ROLLER CHAIN(.335" ROLLER), CAST IRON CAM SPROCKET &MULTIPLE KEYWAY CRANK SPROCKET EXC. STOCKROLLER CAM ENGINES. FOR CAR AND TRUCKAPPLICATIONS INCLUDES .335” SINGLE SEAMLESSROLLER CHAIN, CAST IRON CAM SPROCKET, 3KEYWAY STEEL CRANK SPROCKET WITH +2°/-2° CAMADJUSTMENT.

48510T-9 INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,BILLET STEEL CAM SPROCKET, 9 KEYWAY STEELCRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT,PRESS FIT ROLLER THRUST BEARING.

48510W-9 INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,BILLET STEEL CAM SPROCKET, 9 KEYWAY STEELCRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT,BRONZE WASHER.

21 400 (402) ENG - 1970-72 - 8 Cyl. - 4.13 Bore3pc Set 40205 FOR CAR AND TRUCK APPLICATIONS INCLUDES .220”

DOUBLE ROLLER CHAIN, CAST IRON CAM SPROCKET,3 KEYWAY STEEL CRANK SPROCKET WITH +2°/-2° CAMADJUSTMENT.

40401 FOR CAR AND TRUCK APPLICATIONS INCLUDES .250”DOUBLE SEAMLESS ROLLER CHAIN, CAST IRON CAMSPROCKET, 3 KEYWAY STEEL CRANK SPROCKET WITH+2°/-2° CAM ADJUSTMENT.

40510 FOR CAR AND TRUCK APPLICATIONS INCLUDES .335”SINGLE SEAMLESS ROLLER CHAIN, CAST IRON CAMSPROCKET, 3 KEYWAY STEEL CRANK SPROCKET WITH+2°/-2° CAM ADJUSTMENT.



22 427 ENG - 1966-69 - 8 Cyl. - 4.250 Bore3pc Set 40205 CAR APPLICATIONS ONLY INCLUDES .220” DOUBLE

ROLLER CHAIN, CAST IRON CAM SPROCKET, 3KEYWAY STEEL CRANK SPROCKET WITH +2°/-2° CAMADJUSTMENT.

40401 INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANKSPROCKET WITH +2°/-2° CAM ADJUSTMENT.


267



22 427 ENG - 1966-69 - 8 Cyl. - 4.250 Bore3pc Set 40510 INCLUDES SEAMLESS SINGLE SOLID ROLLER CHAIN

(.335" ROLLER), CAST IRON CAM SPROCKET, MULTIPLEKEYWAY CRANK SPROCKET EXC. STOCK ROLLER CAMENGINES. INCLUDES .335” SINGLE SEAMLESS ROLLERCHAIN, CAST IRON CAM SPROCKET, 3 KEYWAY STEELCRANK SPROCKET WITH +2°/-2° CAM ADJUSTMENT.

48510T-9 CAR APPLICATIONS ONLY INCLUDES .250” DOUBLESEAMLESS ROLLER CHAIN, BILLET STEEL CAMSPROCKET, 9 KEYWAY STEEL CRANK SPROCKET WITH+4°/-4° CAM ADJUSTMENT, PRESS FIT ROLLER THRUSTBEARING.


23 427 ENG - 1980-90 - 8 Cyl. - 4.250 Bore3pc Set 40205 TRUCK APPLICATIONS ONLY INCLUDES .220” DOUBLE


40401 TRUCKS ONLY. INCLUDES .250” DOUBLE SEAMLESSROLLER CHAIN, CAST IRON CAM SPROCKET, 3KEYWAY STEEL CRANK SPROCKET WITH +2°/-2° CAMADJUSTMENT.

40510 INCLUDES SEAMLESS SINGLE SOLID ROLLER CHAIN(.335" ROLLER), CAST IRON CAM SPROCKET, MULTIPLEKEYWAY CRANK SPROCKET EXC. STOCK ROLLER CAMENGINES. INCLUDES .335” SINGLE SEAMLESS ROLLERCHAIN, CAST IRON CAM SPROCKET, 3 KEYWAY STEELCRANK SPROCKET WITH +2°/-2° CAM ADJUSTMENT.



24 454 ENG - 1970-76 - 8 Cyl. - 4.250 Bore3pc Set 40205 CAR APPLICATIONS ONLY INCLUDES .220” DOUBLE



40510 INCLUDES SEAMLESS SINGLE SOLID ROLLER CHAIN(.335" ROLLER), CAST IRON CAM SPROCKET, MULTIPLEKEYWAY CRANK SPROCKET EXC. STOCK ROLLER CAMENGINES. INCLUDES .335” SINGLE SEAMLESS ROLLERCHAIN, CAST IRON CAM SPROCKET, 3 KEYWAY STEELCRANK SPROCKET WITH +2°/-2° CAM ADJUSTMENT.


268



24 454 ENG - 1970-76 - 8 Cyl. - 4.250 Bore3pc Set 48510T-9 CAR APPLICATIONS ONLY INCLUDES .250” DOUBLE

SEAMLESS ROLLER CHAIN, BILLET STEEL CAMSPROCKET, 9 KEYWAY STEEL CRANK SPROCKET WITH+4°/-4° CAM ADJUSTMENT, PRESS FIT ROLLER THRUSTBEARING.


25 454 ENG - 1970-97 - 8 Cyl. - 4.250 Bore3pc Set 40205 1970-1994 INCLUDES .220” DOUBLE ROLLER CHAIN,

CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANKSPROCKET WITH +2°/-2° CAM ADJUSTMENT.

40401 1970-1994 INCLUDES .250” DOUBLE SEAMLESSROLLER CHAIN, CAST IRON CAM SPROCKET, 3KEYWAY STEEL CRANK SPROCKET WITH +2°/-2° CAMADJUSTMENT.

40510 1970-1994 EXC. STOCK ROLLER CAM ENGINES.INCLUDES .335” SINGLE SEAMLESS ROLLER CHAIN,CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANKSPROCKET WITH +2°/-2° CAM ADJUSTMENT.

48510T-9 TRUCK APPLICATIONS ONLY INCLUDES .250” DOUBLESEAMLESS ROLLER CHAIN, BILLET STEEL CAMSPROCKET, 9 KEYWAY STEEL CRANK SPROCKET WITH+4°/-4° CAM ADJUSTMENT, PRESS FIT ROLLER THRUSTBEARING.



PERFORMANCE - CHRYSLER PRODUCTS

1 4.5 (273) ENG - 1965-69 - V8 - 3.625 Bore3pc Set 40202 INCLUDES .200” DOUBLE ROLLER CHAIN, CAST IRON



2 5.2 (318) OHV ENG - 1975-02 - V8 - 3.910 Bore3pc Set 40202 INCLUDES .200” DOUBLE ROLLER CHAIN, CAST IRON






269


PERFORMANCE - CHRYSLER PRODUCTS (Continued)

3 5.6 (340) ENG - 1968-73 - V8 - 4.04 Bore3pc Set 40406 INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,






SINGLE BOLT CAM SPROCKET, 3 KEYWAY STEELCRANK SPROCKET WITH +2°/-2° CAM ADJUSTMENT.








8 6.8 (413) ENG - 1959-65 - 8 Cyl. - 4.1876 Bore3pc Set 40203 INCLUDES .220” DOUBLE ROLLER CHAIN, CAST IRON



9 7.0 (426) WEDGE ENG - 1963-65 - 8 Cyl. - 4.25 Bore3pc Set 40203 INCLUDES .220” DOUBLE ROLLER CHAIN, CAST IRON


40217 INCLUDES .220” DOUBLE ROLLER CHAIN, CAST IRON 3BOLT CAM SPROCKET, 3 KEYWAY STEEL CRANKSPROCKET WITH +2°/-2° CAM ADJUSTMENT.


270


PERFORMANCE - CHRYSLER PRODUCTS (Continued)

10 7.0 (426) HEMI ENG - 1966-71 - 8 Cyl. - 4.250 Bore3pc Set 40217 INCLUDES .220” DOUBLE ROLLER CHAIN, CAST IRON 3

BOLT CAM SPROCKET, 3 KEYWAY STEEL CRANKSPROCKET WITH +2°/-2° CAM ADJUSTMENT.

11 7.2 (440) OHV ENG - 1966-78 - V8 - 4.320 Bore3pc Set 40203 SINGLE BOLT CAM INCLUDES .220” DOUBLE ROLLER

CHAIN, CAST IRON SINGLE BOLT CAM SPROCKET, 3KEYWAY STEEL CRANK SPROCKET WITH +2°/-2° CAMADJUSTMENT.

40217 3 BOLT CAM INCLUDES .220” DOUBLE ROLLER CHAIN,CAST IRON 3 BOLT CAM SPROCKET, 3 KEYWAY STEELCRANK SPROCKET WITH +2°/-2° CAM ADJUSTMENT.

40407 SINGLE BOLT CAM INCLUDES .250” DOUBLESEAMLESS ROLLER CHAIN, CAST IRON CAMSPROCKET, 3 KEYWAY STEEL CRANK SPROCKET WITH+2°/-2° CAM ADJUSTMENT.


PERFORMANCE - FORD PRODUCTS & TRUCKS

1 255 ENG - 1980-82 - 8 Cyl. - 3.680 Bore3pc Set 48551T-9 INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN;

BILLET STEEL CAM SPROCKET; 9 KEYWAY STEELCRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT;PRESS FIT ROLLER THRUST BEARING; W/ 2PC FUELPUMP ECCENTRIC







48520T-9 LATE 1965 USE 1/4" THRUST PLATE INCLUDES .250”DOUBLE SEAMLESS ROLLER CHAIN, BILLET STEELCAM SPROCKET, 9 KEYWAY STEEL CRANK SPROCKETWITH +4°/-4° CAM ADJUSTMENT, PRESS FIT ROLLERTHRUST BEARING.

48520W-9 LATE 1965 USE 1/4" THRUST PLATE INCLUDES .250”DOUBLE SEAMLESS ROLLER CHAIN, BILLET STEELCAM SPROCKET, 9 KEYWAY STEEL CRANK SPROCKETWITH +4°/-4° CAM ADJUSTMENT, BRONZE WASHER.




271


PERFORMANCE - FORD PRODUCTS & TRUCKS (Continued)

4 302 ENG - 1968-2001 - 8 Cyl. - 4.000 Bore3pc Set 40402 YOU MUST USE [MF126] (3.356"L) THRUST PLATE

RATHER THAN [MF125] OR STOCK (3.882"L) PLATE.NOT FOR ROLLER CAMS INCLUDES .250” DOUBLESEAMLESS ROLLER CHAIN, CAST IRON CAMSPROCKET, 3 KEYWAY STEEL CRANK SPROCKET WITH+2°/-2° CAM ADJUSTMENT.

48520T-9 1968-1972 CAR AND TRUCK APPLICATIONS. CARAPPLICATIONS USE 1/4" THRUST PLATE. INCLUDES.250” DOUBLE SEAMLESS ROLLER CHAIN, BILLETSTEEL CAM SPROCKET, 9 KEYWAY STEEL CRANKSPROCKET WITH +4°/-4° CAM ADJUSTMENT, PRESSFIT ROLLER THRUST BEARING.

48520W-9 1968-1972 CAR APPLICATIONS USE 1/4" THRUSTPLATE. INCLUDES .250” DOUBLE SEAMLESS ROLLERCHAIN, BILLET STEEL CAM SPROCKET, 9 KEYWAYSTEEL CRANK SPROCKET WITH +4°/-4° CAMADJUSTMENT, BRONZE WASHER.

48551T-9 1972-1995 1989-94 WITH ROLLER TYPE CHAIN, 1994-95WITH SILENT TYPE CHAIN. 80-88 H/O CARAPPLICATIONS ONLY. INCLUDES .250” DOUBLESEAMLESS ROLLER CHAIN; BILLET STEEL CAMSPROCKET; 9 KEYWAY STEEL CRANK SPROCKET WITH+4°/-4° CAM ADJUSTMENT; PRESS FIT ROLLER THRUSTBEARING; W/ 2PC FUEL PUMP ECCENTRIC

48551T-9 1972-2001 1989-90 WITH ROLLER TYPE CHAIN, 1994-01WITH SILENT TYPE CHAIN. TRUCK APPLICATIONSONLY. INCLUDES .250” DOUBLE SEAMLESS ROLLERCHAIN; BILLET STEEL CAM SPROCKET; 9 KEYWAYSTEEL CRANK SPROCKET WITH +4°/-4° CAMADJUSTMENT; PRESS FIT ROLLER THRUST BEARING;W/ 2PC FUEL PUMP ECCENTRIC

5 351W ENG - 1984-97 - 8 Cyl. - 4.00 Bore3pc Set 40206 INCLUDES .220” DOUBLE ROLLER CHAIN, CAST IRON


40402 YOU MUST USE MF126 (3.356"L) THRUST PLATERATHER THAN MF125 OR STOCK (3.882"L) PLATE; NOTFOR ROLLER CAMS INCLUDES .250” DOUBLESEAMLESS ROLLER CHAIN, CAST IRON CAMSPROCKET, 3 KEYWAY STEEL CRANK SPROCKET WITH+2°/-2° CAM ADJUSTMENT.

48551T-9 1984-1987 4BBL ENG. ONLY INCLUDES .250” DOUBLESEAMLESS ROLLER CHAIN; BILLET STEEL CAMSPROCKET; 9 KEYWAY STEEL CRANK SPROCKET WITH+4°/-4° CAM ADJUSTMENT; PRESS FIT ROLLER THRUSTBEARING; W/ 2PC FUEL PUMP ECCENTRIC

6 351W ENG - 1969-85 - 8 Cyl. - 4.000 Bore3pc Set 40206 TRUCK APPLICATIONS INCLUDES .220” DOUBLE



272



6 351W ENG - 1969-85 - 8 Cyl. - 4.000 Bore3pc Set 40402 YOU MUST USE MF126 (3.356"L) THRUST PLATE

RATHER THAN MF125 OR STOCK (3.882"L) PLATE; NOTFOR ROLLER CAMS INCLUDES .250” DOUBLESEAMLESS ROLLER CHAIN, CAST IRON CAMSPROCKET, 3 KEYWAY STEEL CRANK SPROCKET WITH+2°/-2° CAM ADJUSTMENT.

7 351W ENG - 1969-91 - 8 Cyl. - 4.000 Bore3pc Set 40206 INCLUDES .220” DOUBLE ROLLER CHAIN, CAST IRON


40402 YOU MUST USE THE MF126 3.356" THRUST PLATERATHER THAN MF125 OR STOCK 3.882" THRUSTPLATE; NOT FOR ROLLER CAMS INCLUDES .250”DOUBLE SEAMLESS ROLLER CHAIN, CAST IRON CAMSPROCKET, 3 KEYWAY STEEL CRANK SPROCKET WITH+2°/-2° CAM ADJUSTMENT.

48520T-9 1969-1972 EARLY 1972 USE STANDARD 1/4" THRUSTPLATE INCLUDES .250” DOUBLE SEAMLESS ROLLERCHAIN, BILLET STEEL CAM SPROCKET, 9 KEYWAYSTEEL CRANK SPROCKET WITH +4°/-4° CAMADJUSTMENT, PRESS FIT ROLLER THRUST BEARING.

48520W-9 1969-1972 EARLY 1972 USE STANDARD 1/4" THRUSTPLATE INCLUDES .250” DOUBLE SEAMLESS ROLLERCHAIN, BILLET STEEL CAM SPROCKET, 9 KEYWAYSTEEL CRANK SPROCKET WITH +4°/-4° CAMADJUSTMENT, BRONZE WASHER.

48551T-9 1987-1989 VIN CODE G; W/ROLLER TYPE CHAININCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN;BILLET STEEL CAM SPROCKET; 9 KEYWAY STEELCRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT;PRESS FIT ROLLER THRUST BEARING; W/ 2PC FUELPUMP ECCENTRIC

8 351C ENG - 1970-74 - 8 Cyl. - 4.000 Bore3pc Set 40405 NOT FOR USE WITH ROLLER CAMS INCLUDES .250”

DOUBLE SEAMLESS ROLLER CHAIN; CAST IRON CAMSPROCKET; 3 KEYWAY STEEL CRANK SPROCKET WITH+2°/-2° CAM ADJUSTMENT.

9 351M ENG - 1975-81 - 8 Cyl. - 4.000 Bore3pc Set 40405 NOT FOR USE WITH ROLLER CAMS INCLUDES .250”


10 352 ENG - 1958-67 - 8 Cyl. - 4.000 Bore3pc Set 40204 1958-1966 CAR APPLICATIONS ONLY INCLUDES .220”

DOUBLE ROLLER CHAIN, CAST IRON CAM SPROCKET,3 KEYWAY STEEL CRANK SPROCKET WITH +2°/-2° CAMADJUSTMENT.

40204 1965-1967 TRUCK APPLICATIONS ONLY INCLUDES .220”DOUBLE ROLLER CHAIN, CAST IRON CAM SPROCKET,3 KEYWAY STEEL CRANK SPROCKET WITH +2°/-2° CAMADJUSTMENT.


273



10 352 ENG - 1958-67 - 8 Cyl. - 4.000 Bore3pc Set 40410 1958-1966 CAR APPLICATIONS ONLY INCLUDES .250”

DOUBLE SEAMLESS ROLLER CHAIN, CAST IRON CAMSPROCKET, 3 KEYWAY STEEL CRANK SPROCKET WITH+2°/-2° CAM ADJUSTMENT.

40410 1965-1967 TRUCK APPLICATIONS ONLY INCLUDES .250”DOUBLE SEAMLESS ROLLER CHAIN, CAST IRON CAMSPROCKET, 3 KEYWAY STEEL CRANK SPROCKET WITH+2°/-2° CAM ADJUSTMENT.







13 400 ENG - 1971-82 - 8 Cyl. - 4.000 Bore3pc Set 40405 NOT FOR USE WITH ROLLER CAMS INCLUDES .250”




40410 1963-1963 INCLUDES .250” DOUBLE SEAMLESSROLLER CHAIN, CAST IRON CAM SPROCKET, 3KEYWAY STEEL CRANK SPROCKET WITH +2°/-2° CAMADJUSTMENT.







274



17 429 ENG- 1968-73 - 8 Cyl. - 4.360 Bore3pc Set 40403 INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,


48530T-9 1972-1973 INCLUDES .250” DOUBLE SEAMLESSROLLER CHAIN, BILLET STEEL CAM SPROCKET, 9KEYWAY STEEL CRANK SPROCKET WITH +4°/-4° CAMADJUSTMENT, PRESS FIT ROLLER THRUST BEARING.

18 460 ENG - 1972-97 - 8 Cyl. - 4.360 Bore3pc Set 40403 INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,


48530T-9 1972-1978 INCLUDES .250” DOUBLE SEAMLESSROLLER CHAIN, BILLET STEEL CAM SPROCKET, 9KEYWAY STEEL CRANK SPROCKET WITH +4°/-4° CAMADJUSTMENT, PRESS FIT ROLLER THRUST BEARING.


PERFORMANCE - HUMMER

1 5.3-L,P (325) OHV ENG - 2008-10 - 8 Cyl. - 3.78 Bore3pc Set 48560T-9 INCLUDES .250” SINGLE ROLLER CHAIN, BILLET STEEL



2 6.0-U (364) OHV ENG - 2003-07 - 8 Cyl. - 4.00 Bore3pc Set 48560T-9 INCLUDES .250” SINGLE ROLLER CHAIN, BILLET STEEL




PERFORMANCE - ISUZU

1 5.3-M,P (323) OHV ENG - (2003-06) - 8 Cyl. - 96.0 mm Bore3pc Set 48560T-9 INCLUDES .250” SINGLE ROLLER CHAIN, BILLET STEEL




275


PERFORMANCE - OLDSMOBILE









4 350 ENG - 1968-80 - 8 Cyl. - 4.057 Bore3pc Set 48500T-9 1977-1979 BEST; INCLUDES .250” DOUBLE SEAMLESS

ROLLER CHAIN; BILLET STEEL CAM SPROCKET; 9KEYWAY STEEL CRANK SPROCKET WITH +4°/-4° CAMADJUSTMENT; PRESS FIT ROLLER THRUST BEARING










276


PERFORMANCE - PONTIAC

1 3.8-K (229) ENG - 1980-81 - 6 Cyl. - 3.736 Bore3pc Set 48500T-9 BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLER



2 4.3-Z (262) ENG - 1985 - 6 Cyl. - 4.00 Bore3pc Set 48500T-9 BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLER



3 4.4-J (267) ENG - 1981-82 - 8 Cyl. - 3.50 Bore3pc Set 48500T-9 BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLER



4 5.0 (305) ENG - 1977-87 - 8 Cyl. - 3.736 Bore3pc Set 40201 1982-1987 EXCLUDING STOCK ROLLER CAM ENGINES



40500 1982-1987 EXCLUDING STOCK ROLLER CAM ENGINESINCLUDES .335” SINGLE SEAMLESS ROLLER CHAIN,CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANKSPROCKET WITH +2°/-2° CAM ADJUSTMENT.



40520 1982-1987 EXCLUDING STOCK ROLLER CAM ENGINES.RACING APPLICATIONS ONLY. BETTER; NCLUDES .375”HY-VO TEC SILENT CHAIN, CAST IRON CAMSPROCKET, 9 KEYWAY STEEL CRANK SPROCKET WITH+4°/-4° CAM ADJUSTMENT.

277


PERFORMANCE - PONTIAC (Continued)

5 5.0 (307) ENG - 1971-72 - 8 Cyl. - 3 7/8 Bore3pc Set 48500T-9 BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLER







8 350-P ENG - 1977 - 8 Cyl. - 3.875 Bore3pc Set 40408 INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,


9 5.7-L (350) ENG - 1977-79 - 8 Cyl. - 3.875 Bore3pc Set 48500T-9 BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLER



10 5.7-G (350) OHV ENG - 1998-02 - 8 Cyl. - 3.90 Bore3pc Set 48560T-9 INCLUDES .250” SINGLE ROLLER CHAIN, BILLET STEEL



11 5.7 (350) OHV ENG - 2004 - 8 Cyl - 3.90 Bore3pc Set 48560T-9 INCLUDES .250” SINGLE ROLLER CHAIN, BILLET STEEL



278


PERFORMANCE - PONTIAC (Continued)

12 6.0-U (364) OHV ENG - 2005-06 - 8 Cyl. - 4.00 Bore3pc Set 48560T-9 INCLUDES .250” SINGLE ROLLER CHAIN, BILLET STEEL














PERFORMANCE - SAAB

1 5.3-M (325) OHV ENG - 2005-09 - 8 Cyl. - 3.78 Bore3pc Set 48560T-9 INCLUDES .250” SINGLE ROLLER CHAIN, BILLET STEEL



2 6.0-H (364) OHV ENG - 2008-09 - 8 Cyl. - 4.00 Bore3pc Set 48560T-9 INCLUDES .250” SINGLE ROLLER CHAIN, BILLET STEEL



279

NOTES

280

Part No. ApplicationCHAIN TENSIONER

5497B MERC, FORD - 281 (1993-05)

BD6005 NISS, SUZI - (2005-14)

Part No. ApplicationCHAIN TENSIONER (Cont.)CHAIN TENSIONER (Cont.)

BT01 TOYO - (1971-89)

BT07 NISS - (1969-89)

ABBREVIATIONS USED TOINDICATE CAR AND TRUCK MANUFACTURERS

ACUR: ACURAALFA: ALFA ROMEOALLT: ALLIS CHALMERS LIFT TRUCKALTR: ALLIS CHALMERS TRACTORAMC: AMERICAN MOTORSAMC: PERFORMANCE - AMERICAN MOTORS & JEEPAUDI: AUDIAUS: AUSTINBMW: BMWBUIC: BUICKBUIC: PERFORMANCE - BUICKCADL: CADILLACCADL: PERFORMANCE - CADILLACCASE: CASE TRACTORCATP: CATERPILLARCHEV: CHEVROLETCHEV: PERFORMANCE - CHEVROLET CARS & TRUCKSCHYL: CHRYSLERCHYL: PERFORMANCE - CHRYSLER PRODUCTSCHYL: CHRYSLER MARINECHYU: CHRYLSER-INDUSTRIALCONT: CONTINENTALCPGT: MINI COOPERCUMM: CUMMINSDAEW: DAEWOODAIH: DAIHATSUDESO: DESOTODETD: DETROIT DIESELDODG: DODGEDODT: DODGE TRUCKEAGL: EAGLEFIAT: FIATFORD: FORDFORD: PERFORMANCE - FORD PRODUCTS & TRUCKSFORD: FORD MARINEFOTR: FORD TRUCKFOTT: FORD TRACTORFOTU: FORD INDUSTRIALGMC: GMC/CHEVY TRUCKSHENR: HENRY-JHERC: HERCULESHOND: HONDAHUM: HUMMERHUMMER: PERFORMANCE - HUMMERHYUN: HYUNDAIIHC: I.H.C. TRUCKIHCT: I.H.C. TRACTOR & POWER UNITSINFI: INFINITIISUZ: ISUZU

ISUZ: PERFORMANCE - ISUZUJAGU: JAGUARJEEP: JEEPJOHN: JOHN DEERE TRACTORKAIS: KAISERKIA: KIALEXU: LEXUSMAZD: MAZDAMENZ: MERCEDES BENZMERC: MERCURY (INC. LINCOLN)MERC: MERCURY MARINEMGGB: MGMINN: MINNEAPOLIS-MOLINEMITS: MITSUBISHINISS: NISSAN/DATSUNNISS: NISSAN INDUSTRIALOLDS: OLDSMOBILEOLDS: PERFORMANCE - OLDSMOBILEOLTR: OLIVER TRACTOROMC: OMCOPEL: OPELPERK: PERKINSPEUG: PEUGEOTPLYM: PLYMOUTHPONT: PONTIACPONT: PERFORMANCE - PONTIACPORS: PORSCHERENL: RENAULTREO: REOROVE: ROVERSAAB: SAABSAAB: PERFORMANCE - SAABSATU: SATURNSCI: SCIONSTUD: STUDEBAKERSUBU: SUBARUSUZI: SUZUKITOY: SPORT COMPACT PERFORMANCE - TOYOTA

CARS & TRUCKSTOYO: TOYOTATRIU: TRIUMPHVOLK: VOLKSWAGENVOLV: VOLVOWAUK: WAUKESHAWHIT: WHITE TRUCKWHTR: WHITE PDQ TRUCKSWISC: WISCONSINYUGO: YUGO

NUMERICAL LISTING

281


BT08 NISS - (1970-84)

BT16 TOYO - (1975-90)

BT17 GMC, ISUZ, OPEL, MAZD - 111 (1971-84)

BT18 TOYO - (1971-79)

BT46 FOTR, MAZD - 110 (1971-78)

BT47 FOTR, MAZD - 122 (1976-85)

BT49 DODG, DODT, MITS, PLYM, CHYL, MAZD - 122,

156 (1974-89)

BT61 GMC, ISUZ - 119 (1982-87)

BT63 GMC, ISUZ, OPEL - 111, 119 (1976-87)

BT68 TOYO - (1971-82)

BT100 TOYO - (1981-95)

BT103 NISS - (1966-70)

BT127 MERC, FORD - 140, 153 (1984-94)

BT143 BUIC, OLDS, PONT - 151 (1985-91)

BT157 FOTR, MERC, MAZD - 177, 245 (1986-00)

BT167 AMC, DODT, EAGL, JEEP - 150, 153 (1983-02)

BT168 MAZD - (1989-94)

BT176 NISS - (1989-97)

BT179 NISS - (1989-90)

BT188 BUIC, CHEV, OLDS, PONT - 138 (1987-95)

BT199 TOYO - (1991-95)


BT229 NISS - (1991-99)

BT230 NISS - (1991-99)

BT235 NISS - (1991-04)

BT236 NISS - (1991-04)

BT245 NISS, INFI - (1991-02)

BT298 DODG, DODT, JEEP, PLYM, CHYL - 135, 148, 153

(1981-10)

BT313 BUIC, OLDS, CADL - 244, 281 (1993-11)

BT314 BUIC, OLDS, CADL - 244, 281 (1993-11)

BT323 FOTR, MERC, FORD - 232, 238, 256 (1982-08)

BT327 SATU - 116 (1991-02)

BT345 FOTR, MAZD - 245 (1990-00)



BT358 TOYO - (1994-13)

BT359 TOYO - (1991-04)

BT402 FOTR, MERC, FORD - 281, 330, 415 (1991-14)

BT403 FOTR, MERC, FORD - 281, 330, 415 (1991-14)

BT404 MERC, FORD - 281, 330, 354,355 (1993-14)

BT405 MERC, FORD - 281, 330, 354,355 (1993-14)

BT406 MERC, FORD - 155, 183 (1995-12)

BT408A MERC, FORD - 155, 183 (1995-12)

BT411 FOTR, MERC - 330, 415 (1997-14)

BT412 FOTR, MERC - 330, 415 (1997-14)

BT417 MERC, FORD - 330 (1999-12)

BT418 DODT, JEEP, MITS - 226, 285 (1998-13)

BT419 DODT, JEEP, MITS, CHYL - 285 (1998-10)

BT420 DODT, JEEP, MITS, CHYL - 285 (1998-10)

BT426 DODG, CHYL - 167 (1998-10)

BT426A DODG, CHYL - 167 (1998-10)

BT427 DODG, CHYL - 167 (1998-10)

BT428 DODT - 238 (1987-03)


BT429 FOTR, MERC, FORD - 245, 281, 330, 415

(1991-14)

BT430 FOTR, MERC, FORD - 281, 330, 415 (1991-14)

BT431 DODT, JEEP, MITS - 226 (2002-13)

BT432 DODT, JEEP, MITS - 226 (2002-13)

BT433 DODT, JEEP, MITS - 226 (2002-13)

BT452 FOTR, MERC, FORD, MAZD - 121, 122, 138, 140

(2001-15)

BT506 DODG, CHYL - 167 (1998-10)

BT507 DODG, CHYL - 167 (1998-10)

BT5115 BUIC, CHEV, GMC, ISUZ, OLDS, CADL, PONT -

121, 122, 134 (1983-03)

BT5383 CHEV, GMC, OLDS, SATU, PONT, SAAB - 122,

134, 145 (2000-14)

BT5412 SATU - 116 (1991-02)

BT5436 NISS, INFI - (1995-01)

BT5437 NISS, INFI - (1995-01)

BT5441 NISS, INFI - (1995-01)

BT5442 NISS, INFI - (1995-01)

BT5452 GMC, OLDS - 262 (1992-14)

BT5481 CHEV, GMC, OLDS, SATU, PONT, SAAB - 122,

134, 145 (2000-14)

BT5489 DODG, DODT, JEEP, CHYL - 345, 370 (2003-14)

BT5490 CHEV, GMC, HUM, CADL, SAAB - 294, 325, 364,

376 (1999-14)

BT5511 GMC, HUM, ISUZ - 169, 178, 211, 223 (2004-12)

BT5512 BUIC, GMC, HUM, ISUZ, OLDS, SAAB - 169, 178,

211, 223, 256 (2002-12)

BT5513 FOTR, MAZD - 138, 183 (2001-12)

BT5514 FOTR, FORD, MAZD - 121, 122, 138 (2001-15)

BT5535 BUIC, CHEV, GMC, SATU, SUZI, CADL, PONT -

170, 182, 217, 220 (2004-15)


170, 182, 217, 220 (2004-15)


170, 182, 217, 220 (2004-15)

BT5549 MERC, FORD, MAZD - 183 (1996-12)

BT5550 MERC, FORD, MAZD - 183 (1996-12)

BT5555 FOTR, FORD, MAZD - 121, 122 (2004-15)

BT5557 HYUN, KIA - (2006-13)

BT5559 HYUN, KIA - (2006-13)

BT5560 HYUN, KIA - (2006-13)

BT5563 HYUN, KIA - (2006-13)

BT5565 SCI, TOYO - (2000-14)

BT5566 SCI, TOYO - (2000-14)

BT5568 GMC - 262 (2002-14)

BT5569 ACUR, HOND - (2002-15)

BT5573 ACUR, HOND - (2002-15)

BT5574 ACUR, HOND - (2002-15)

BT6000 NISS, SUZI - (2005-14)

BT6001 NISS, SUZI - (2005-14)

BT6002 NISS, SUZI - (2005-14)

MSB-02 DODG, CHYL - 167 (1998-10)

NUMERICAL LISTING

282

Part No. ApplicationADAPTOR PLATE

AP275 MERC, FORD, BUIC - 281, 350 (1977-11)

BELT TENSIONERBD32 DODG, MITS, PLYM - (1977-88)

BD33 DODG, EAGL, MITS, PLYM, HYUN - 86, 90

(1979-02)

BD38 DODG, EAGL, MITS, PLYM - 107 (1977-94)

BELT GUIDEBG53 DODG, PLYM - (1971-77)

BG94 CHEV, ISUZ, PONT - 110 (1981-86)

BG95 MERC, FORD - 116, 121, 122, 98 (1981-04)

BG119 NISS - (1983-86)

BELT TENSIONERBT10 MERC, OPEL, FORD - 122 (1968-74)

BT21 HOND - (1975-84)

BT56 DODG, PLYM - (1971-77)

BT66 CHEV, TOYO - 98 (1980-97)

BT75 NISS - (1982-88)

BT76 NISS - (1982-89)

BT89 AUDI, VOLK - (1977-06)

BT91 DODG, DODT, PLYM, CHYL - 135 (1981-94)

BT92 MERC, FORD - 116, 98 (1981-96)

BT93 HOND - (1979-83)

BT94 DODG, PLYM, CHYL - 153 (1986-95)

BT96 TOYO - (1982-88)

BT104 TOYO - (1983-86)

BT105 DODG, DODT, MITS, PLYM - 122, 144 (1983-05)

BT106 DODG, DODT, EAGL, MITS, PLYM - 122, 144

(1983-05)

BT111 TOYO - (1983-01)

BT113 HOND - (1983-89)

BT115 HOND - (1983-86)

BT116 HOND - (1981-87)

BT117 MAZD - (1984-87)

BT118 NISS - (1983-86)

BT120 NISS, INFI - (1984-04)

BT124 TOYO - (1984-86)

BT129 FORD, MAZD - 152 (1992-01)

BT134 CHEV, ISUZ - 92 (1985-89)

BT135 TOYO - (1985-91)

BT139 CHEV - 61, 79 (1985-94)

BT140 SUBU - (1985-94)

BT141 SUBU - (1985-94)

BT148 AMC, DODG, DODT, PLYM, PORS, AUDI, VOLK -

105, 121 (1973-02)

BT160 DODG, EAGL, MITS, PLYM - 107 (1983-94)

BT161 DODG, DODT, MITS, PLYM, HYUN - 122, 144

(1983-05)

BT162 HOND - (1988-95)

BT164 MERC, FORD, KIA, MAZD - 79, 98 (1986-97)

BT166 FORD, KIA, MAZD - 133 (1987-02)

BT192 DODG, DODT, PLYM, CHYL - 135, 153 (1981-95)

BT194 DODG, EAGL, MITS, PLYM, HYUN - 122 (1989-01)

BT195 DODG, DODT, MITS, PLYM, CHYL - 181 (1987-05)

BT196 EAGL, MITS, PLYM - 122, 144 (1985-05)

Part No. ApplicationBELT TENSIONER (Cont.)BELT TENSIONER (Cont.)

BT197 DODT, EAGL, MITS, PLYM, HYUN - 122, 144

(1989-05)

BT198 ACUR - (1986-90)

BT202 HOND - (1988-91)

BT203 ACUR, HOND - (1990-02)

BT205 TOYO - (1986-92)

BT206 TOYO - (1987-94)

BT207 TOYO - (1987-94)

BT209 TOYO - (1988-95)

BT213 MERC, FORD, KIA, MAZD - 98 (1988-05)

BT225 EAGL, MITS, PLYM, HYUN - 122 (1989-01)

BT260 NISS, INFI - (1990-97)

BT263 ISUZ - (1985-95)

BT271 DODG, MITS, CHYL - 152, 181 (1991-12)

BT301 TOYO - (1987-01)

BT308 CHEV, OLDS, PONT - 207 (1991-97)

BT324 FORD, MAZD - 152 (1992-01)

BT326 ACUR - (1986-89)

BT342 CHEV, TOYO - 110, 98 (1989-97)

BT350 MERC, FORD - 116 (1986-96)

BT357 DODG, EAGL, PLYM, CHYL - 197, 215 (1993-10)

BT5120 DODG, MITS, CHYL - 152, 181 (1995-05)

BT5121 DODG, MITS, CHYL - 152, 181 (1995-12)

BT5262 ACUR, HOND - (1990-01)

BT5280 SUBU - (1992-97)

BT5390 MERC, FORD - 121 (1995-04)

BT5406 MERC, FORD - 121, 122 (1997-04)

BT5450 HOND - (1993-09)

BT5451 ACUR, HOND - (2001-05)

BT5525 LEXU, TOYO - (1990-10)

BT6003 LEXU, TOYO - (1990-10)

CHAIN GUIDEBD30 DODG, DODT, MITS, PLYM, CHYL, MAZD - 122,

156 (1974-89)

BD31 DODG, DODT, MITS, PLYM, CHYL, MAZD - 122,

156 (1974-89)

CHAIN DAMPER ADAPTER BRACKETBD417-BRKT CHEV, GMC, HUM, CADL, PONT - 294, 323, 325,

346, 350, 364 (1997-13)

BD417-DBRKT CHEV, GMC, HUM, CADL, PONT - 294, 323, 325,

346, 350, 364 (1997-13)

CHAIN GUIDEBG48 DODG, DODT, MITS, PLYM, CHYL, MAZD - 122,

156 (1976-89)

BG51 DODG, DODT, MITS, PLYM, CHYL, MAZD - 122,

156 (1976-89)

BG55 NISS - (1980-86)

BG64 DODG, DODT, MITS, PLYM, CHYL, MAZD - 122,

156 (1976-89)

BG77 MAZD - (1979-84)

BG80 MAZD - (1981-85)

BG85 MAZD - (1971-76)

BG86 MAZD - (1976-78)

BG87 MAZD - (1971-76)

NUMERICAL LISTING

283

Part No. ApplicationCHAIN GUIDE (Cont.)CHAIN GUIDE (Cont.)

BG88 MAZD - (1971-76)

BG127 NISS - (1980-89)

BG128 NISS - (1983-89)

BG169 MAZD - (1989-94)

BG170 MAZD - (1989-94)

BG171 MAZD - (1989-94)

BG172 MAZD - (1989-94)

BG173 MAZD - (1989-94)

BG177 NISS - (1989-97)

BG178 NISS - (1989-97)

BG180 NISS - (1989-90)

BG181 NISS - (1989-90)

BG187 FOTR, MERC - 177 (1986-92)

BG200 TOYO - (1991-95)

BG231 NISS - (1991-99)

BG232 NISS - (1991-99)

BG233 NISS - (1991-99)

BG234 NISS - (1991-99)

BG237 NISS - (1991-04)

BG238 NISS - (1991-04)

BG239 NISS - (1991-04)

BG240 NISS - (1991-04)

BG246 NISS, INFI - (1991-02)

BG247 NISS, INFI - (1991-02)

BG248 NISS, INFI - (1991-02)

BG261 FOTR, MAZD - 245 (1990-00)

BG297 DODG, DODT, JEEP, PLYM, CHYL - 135, 148, 153

(1981-10)

BG304 BUIC, CHEV, OLDS, PONT - 138 (1987-95)



BG307 BUIC, OLDS, PONT - 138 (1992-94)

BG309 BUIC, OLDS, CADL - 244, 281 (1993-11)

BG310 BUIC, OLDS, CADL - 244, 281 (1993-11)

BG315 MERC, FORD - 281 (1991-11)

BG316 MERC, FORD - 281 (1991-11)

BG319 FOTR, MERC, FORD - 281 (1991-13)

BG320 FOTR, MERC, FORD - 281 (1991-13)

BG328 SATU - 116 (1991-02)

BG329 SATU - 116 (1991-02)

BG330 SATU - 116 (1991-02)

BG331 SATU - 116 (1991-02)

BG332 SATU - 116 (1991-02)

BG333 FOTR, MERC, FORD - 281 (1991-13)

BG334 FOTR, MERC, FORD - 281 (1991-13)

BG337 AMC, DODT, EAGL, JEEP - 150, 153, 242

(1983-06)

BG360 TOYO - (1994-04)





BG391 MERC, FORD - 281 (1993-05)

BG391G MERC, FORD - 281 (1993-05)

BG392G MERC, FORD - 281 (1993-05)


BG409 MERC, FORD - 155, 183 (1995-12)

BG410 MERC, FORD - 155, 183 (1995-12)

BG413 FOTR, MERC - 330, 415 (1997-14)

BG414 FOTR, MERC - 330, 415 (1997-14)

BG415 MERC, FORD - 330 (1999-12)

BG416 MERC, FORD - 330 (1999-12)

BG422 DODT, JEEP, MITS, CHYL - 285 (1998-10)

BG423 DODG, CHYL - 167 (1998-10)

BG423A DODG, CHYL - 167 (1998-10)

BG424 DODG, CHYL - 167 (1998-10)

BG425 DODG, CHYL - 167 (1998-10)

BG434 DODT, JEEP, MITS - 226 (2002-13)

BG435 DODT, JEEP, MITS - 226 (2002-13)

BG449 FOTR, MERC, FORD, MAZD - 121, 122, 138, 140

(2001-15)

BG5251 INFI - (1990-96)

BG5253 INFI - (1990-96)

BG5254 INFI - (1990-96)

BG5255 INFI - (1990-96)

BG5256 INFI - (1990-96)

BG5257 INFI - (1990-96)

BG5375 BUIC, CHEV, GMC, OLDS, SATU, PONT, SAAB -

122, 134, 145 (2000-14)


122, 134, 145 (2000-14)

BG5382 CHEV, GMC, OLDS, SATU, PONT, SAAB - 122,

134, 145 (2000-14)


134, 145 (2000-14)


134, 145 (2000-14)


122, 134, 145 (2000-14)

BG5413 SATU - 116 (1991-02)

BG5414 SATU - 116 (1991-02)

BG5415 SATU - 116 (1991-02)

BG5416 SATU - 116 (1991-02)

BG5434 TOYO - (1991-04)

BG5435 TOYO - (1991-04)

BG5438 NISS, INFI - (1995-01)

BG5439 NISS, INFI - (1995-01)

BG5440 NISS, INFI - (1995-01)

BG5504 BUIC, GMC, HUM, ISUZ, OLDS, SAAB - 169, 178,

211, 223, 256 (2002-12)


256 (2002-09)

BG5510 GMC, HUM, ISUZ, SAAB - 178, 223, 256 (2002-12)

BG5515 FOTR, MAZD - 138 (2001-13)

BG5530 BUIC, CHEV, GMC, SATU, SUZI, CADL, PONT -

170, 182, 217, 220 (2004-15)


170, 182, 217, 220 (2004-15)


170, 182, 217, 220 (2004-15)

BG5533 BUIC, CHEV, GMC, MERC, SATU, SUZI, CADL,

PONT - 170, 182, 183, 217, 220 (1996-15)

NUMERICAL LISTING

284



170, 182, 217, 220 (2004-15)


170, 182, 217, 220 (2004-15)

BG5551 MERC, FORD, MAZD - 183 (1996-12)

BG5552 MERC, FORD, MAZD - 183 (1996-12)

BG5553 MERC, FORD, MAZD - 183 (1996-13)

BG5556 FOTR, FORD, MAZD - 121, 122 (2004-15)

BG5558 HYUN, KIA - (2006-13)

BG5561 HYUN, KIA - (2006-13)

BG5564 SCI, TOYO - (2000-14)

BG5570 ACUR, HOND - (2002-15)

BG5571 ACUR, HOND - (2002-15)

BG5572 ACUR, HOND - (2002-15)

BG6003 NISS, SUZI - (2005-14)

BG6004 NISS, SUZI - (2005-14)


211, 223, 256 (2002-12)

BG6007 GMC, HUM, ISUZ - 169, 178, 211, 223 (2004-12)

DAMPERBD22 TOYO - (1968-82)

BD23 TOYO - (1971-89)

BD25 TOYO - (1975-90)

BD26 TOYO - (1975-90)

BD27 NISS - (1969-84)

BD34 GMC, ISUZ, OPEL - 111, 119 (1976-87)

BD37 GMC - 111 (1972-75)

BD40 FOTR, MAZD - 110, 122 (1972-84)

BD43 TOYO - (1971-79)

BD44 BUIC, CHEV, GMC, JEEP, OLDS, CADL, PONT -

181, 196, 198, 225, 231, 252, 350 (1962-89)

BD45 BUIC, CHEV, GMC, JEEP, OLDS, CADL, PONT -

181, 196, 198, 225, 231, 252, 350 (1962-87)

BD58 BUIC, CHEV, OLDS, PONT - 181, 204, 231

(1984-05)

BD59 AMC, BUIC, CHEV, GMC, ISUZ, JEEP, OLDS,

PONT - 173, 189, 207 (1980-95)

BD71 TOYO - (1981-84)

BD74 FOTR, MAZD - 110, 122 (1972-84)

BD81 MAZD - (1981-85)

BD83 MAZD - (1971-76)

BD98 NISS - (1981-83)

BD101 TOYO - (1981-90)

BD102 TOYO - (1981-95)

BD102HD TOYO - (1981-95)

BD131 BUIC, CHEV, OLDS, CADL, PONT - 173, 189

(1985-95)

BD132 TOYO - (1981-95)

BD295 BUIC, CHEV, OLDS, PONT - 204, 231 (1988-05)

BD311 BUIC, OLDS, CADL - 244, 281 (1993-11)

BD312 BUIC, OLDS, CADL - 244, 281 (1993-11)

BD321 FOTR, MERC, FORD - 281 (1991-13)

BD322 FOTR, MERC, FORD - 281 (1991-13)

BD336 BUIC, CHEV, OLDS, PONT - 189, 207 (1993-05)

Part No. ApplicationDAMPER (Cont.)DAMPER (Cont.)

BD344 BUIC, CHEV, OLDS, PONT - 231 (1990-09)

BD361 TOYO - (1994-04)

BD362 TOYO - (1994-04)

BD363 TOYO - (1994-04)

BD364 TOYO - (1994-04)

BD393 MERC, FORD - 281 (1993-05)

BD394 MERC, FORD - 281 (1993-05)

BD417 CHEV, GMC, ISUZ, CADL, PONT, SAAB - 294,

323, 325, 346, 364, 376 (1999-14)

BD421 DODT, JEEP, MITS, CHYL - 285 (1998-10)

BD600 BUIC, CHEV, OLDS, PONT - 189, 207, 213, 214

(1993-10)

IDLERBT128 FORD, MAZD - 152 (1992-01)

BT214 MERC, FORD, KIA, MAZD - 98 (1988-05)

BT215 FORD, MAZD - 133 (1987-93)

BT216 MAZD - (1988-98)

BT227 DODG, MITS, CHYL - 152, 181 (1989-12)

BT293 MAZD - (1988-98)

BT325 FORD, MAZD - 152 (1992-01)

BT5222 MAZD - (1990-95)

BT5223 MAZD - (1990-95)

BT5243 NISS, INFI - (1990-97)

BT5244 NISS, INFI - (1990-97)

BT5259 LEXU, TOYO - (1990-10)

BT5268 ACUR - (1991-98)

BT5281 SUBU - (1992-97)

BT5283 NISS, INFI - (1990-97)

BT5292 MAZD - (1990-95)

BT5299 TOYO - (1992-99)

BT5300 TOYO - (1992-99)

BT5409 MERC, FORD - 121 (1995-04)

BT5410 MERC, FORD - 121 (1995-04)

BT5444 KIA - (1995-02)

BT5448 HOND - (1993-01)

CAM BUTTONCB100 ACUR, ALFA, AMC, BUIC, CHEV, OLDS, CADL,

PONT - 181, 196, 231, 252 (2003)

CB200 FOTR, MERC, FORD - 232 (1982-04)

CB300 BUIC, OLDS, PONT - 204, 231 (1988-93)

CAMSHAFT BOLT5496B CHEV, OLDS, SATU, PONT - 122, 134, 145

(2000-11)

CAM THRUST PLATE SPACERMG221 AMC, BUIC, CHEV, GMC, ISUZ, JEEP, OLDS,

PONT, STUD - 122, 134, 151, 153, 189, 194, 230,

250, 292 (1962-03)

S802SP FOTR, MERC, FORD - 281, 415 (1991-13)

S803SP MERC, FORD - 281, 330 (1993-05)

OIL JET NOZZLE5467N CHEV, OLDS, SATU, PONT - 122, 134, 145

(2000-14)

NUMERICAL LISTING

285

Part No. ApplicationTIMING BELT

B-012 CHEV, OLDS, PONT - 140 (1971-77)

B-013 DODG, MERC, PLYM, FORD - 122 (1971-80)

B-014 FOTR, MERC, FORD - 122, 140 (1974-97)

B-017 AMC, DODG, DODT, PLYM, PORS, AUDI, VOLK -

105, 121 (1973-97)

B-032 VOLV - (1976-95)

B-036 CHEV, TOYO, HOND - 98 (1975-97)

B-037 CHEV - 85, 98 (1976-87)

B-039 CHEV - 98 (1976-87)

B-041 HOND - (1975-84)

B-043 AUDI, VOLK - (1977-92)

B-061 CHEV, PONT - 98 (1976-87)

B-067 MERC, FORD - 116, 98 (1981-96)

B-070 CHEV, TOYO - 98 (1980-88)

B-071 DODG, DODT, PLYM, CHYL - 135 (1981-94)

B-073 DODG, MITS, PLYM, HOND, HYUN - 86, 90

(1979-94)

B-074 TOYO - (1982-88)

B-075 GMC, ISUZ - (1981-87)

B-076 CHEV, ISUZ, PONT - 110 (1981-86)

B-077 NISS - (1982-88)

B-078 NISS - (1982-89)

B-081 BUIC, OLDS, PONT - 112, 122 (1982-91)

B-086 NISS - (1981-83)

B-087 TOYO - (1983-86)

B-088 MAZD - (1984-87)

B-089 DODG, DODT, MITS, PLYM - 122 (1983-91)

B-090 DODG, DODT, EAGL, MITS, PLYM - 107, 122

(1983-94)

B-091 DODT, FOTR, MITS - 140 (1983-87)

B-092 DODT, FOTR, MITS - 140 (1983-87)

B-093 DODG, MITS, PLYM - 107 (1983-90)

B-094 HOND - (1983-86)

B-095 CHEV, SUZI - 61, 79 (1985-97)

B-096 NISS - (1983-86)

B-097 NISS - (1983-86)

B-099 HOND - (1981-87)

B-0100 ACUR, NISS - (1984-03)

B-0101 ACUR, TOYO - (1982-03)

B-0103 MERC, FORD, MAZD - 122 (1984-87)

B-0104 MERC, NISS, INFI - 183 (1984-98)

B-0106 BMW - (1982-88)

B-0107 PORS - (1983-89)

B-0108 PORS - (1983-89)

B-0111 PEUG, RENL - (1984-90)

B-0112 CHEV, TOYO - 98 (1985-91)

B-0113 MAZD - (1984-87)

B-0114 DODG, PLYM, CHYL - 153 (1986-95)

B-0117 MAZD - (1984-87)

B-0118 CHEV, ISUZ - 92 (1985-89)

B-0121 ISUZ - (1985-89)

B-0122 ISUZ - (1986-95)

B-0123 MAZD - (1986-94)

B-0124 DODT, MITS, HYUN - 144 (1985-05)

B-0125 TOYO - (1986-95)

Part No. ApplicationTIMING BELT (Cont.)TIMING BELT (Cont.)

B-0126 TOYO - (1986-92)

B-0127 AUDI, VOLK - (1983-92)

B-0128 DODG, EAGL, MITS, PLYM, HYUN - 90 (1985-03)

B-0129 ACUR - (1986-90)

B-0131 BMW - (1982-06)

B-0132 DODG, PLYM, CHYL - 153 (1986-95)

B-0133 VOLK - (1986-93)

B-0134 FORD, MAZD - 133 (1987-93)

B-0135 SUBU - (1987-95)

B-0136 TOYO - (1987-90)

B-0137 NISS - (1987-89)

B-0139 DODG, DODT, MITS, PLYM, CHYL, HYUN - 181

(1987-00)

B-0140 EAGL, RENL - 132 (1987-89)

B-0141 MERC, FORD, MAZD - 79, 98 (1986-97)

B-0142 HOND - (1988-91)

B-0143 HOND - (1988-95)

B-0144 HOND - (1988-90)

B-0145 HOND - (1988-95)

B-0146 MAZD - (1988-98)

B-0147 ISUZ, HOND - (1988-97)

B-0148 PONT - 98 (1988-93)

B-0150 SUBU - (1989-91)

B-0151 SUBU - (1989-91)

B-0152 PORS - (1987-95)

B-0153 DODG, DODT, PLYM, CHYL - 135, 153 (1981-95)

B-0154 TOYO - (1988-95)

B-0155 EAGL, MITS - 122 (1989-93)

B-0157 LEXU, TOYO - (1988-91)

B-0158 DODG, DODT, EAGL, MITS, PLYM - 107, 122

(1983-94)

B-0160 HOND - (1983-89)

B-0161 HOND - (1981-87)

B-0162 CHEV, ISUZ - 92 (1985-89)

B-0163 PONT - 121, 122 (1987-94)

B-0164 GMC, SUZI - 98 (1989-00)

B-0165 DODG, EAGL, MITS, PLYM, HYUN - (1989-95)

B-0166 CHEV - 61 (1987-00)

B-0167 EAGL, MITS, PLYM, HYUN - 122 (1989-06)

B-0168 DODG, DODT, EAGL, MITS, PLYM, CHYL, HYUN

- 122, 143,148, 144, 148 (1989-12)

B-0169 CHEV, ISUZ - 98 (1989-92)

B-0170 AUDI - (1987-92)

B-0171 SUZI - (1989-94)

B-0172 SUBU - (1990-01)

B-0173 VOLV - (1989-92)

B-0174 VOLV - (1989-92)

B-0176 CHEV, TOYO - 98 (1985-91)

B-0177 CHEV, ISUZ - 98 (1990-93)

B-0178 DAIH - (1988-92)

B-0179 MERC, FORD, KIA, MAZD - 98 (1988-05)

B-0180 NISS, INFI - (1990-97)

B-0181 DAIH - (1989-92)

B-0182 DAIH - (1990-92)

B-0183 MAZD - (1990-95)

NUMERICAL LISTING

286


B-0184 ACUR, HOND - (1990-01)

B-0185 FORD, KIA, MAZD - 79 (1986-97)

B-0186 ACUR, ISUZ, HOND - (1990-02)

B-0187 ISUZ, HOND - (1990-97)

B-0189 PEUG - (1989-91)

B-0190 LEXU - (1990-00)

B-0191 DODG, EAGL, MITS, PLYM, HYUN - (1991-03)

B-0192 CHEV, OLDS, PONT - 207 (1991-97)

B-0193 ACUR - (1991-05)

B-0194 CHEV, MERC, FORD - 116, 61, 79 (1986-01)

B-0195 DODG, MITS - 181 (1991-99)

B-0198 VOLV - (1989-92)

B-0199 TOYO - (1987-01)

B-0200 LEXU, TOYO - (1992-93)

B-0201 DODG, EAGL, MITS, PLYM - 112 (1992-02)

B-0203 PONT - 98 (1988-93)

B-0204 EAGL, MITS, PLYM - 144 (1985-05)

B-0205 CHEV, ISUZ - 110, 350 (1992-02)

B-0206 DODG, CHYL - 135 (1989-93)

B-0208 TOYO - (1992-99)

B-0210 FOTR, FORD - 140 (1974-97)

B-0211 ACUR - (1992-98)

B-0212 GMC, SUZI - 98 (1989-02)

B-0214 FORD, MAZD - 152 (1992-01)

B-0215 LEXU, TOYO - (1992-05)

B-0216 HOND - (1992-96)

B-0217 VOLV - (1992-10)

B-0218 AUDI - (1992-98)

B-0219 DODG, EAGL, CHYL - 215 (1993-10)

B-0220 ISUZ - (1992-95)

B-0221 ACUR, ISUZ, HOND - (1992-97)

B-0223 HOND - (1988-95)

B-0224 ACUR, HOND - (1988-00)

B-0226 HOND - (1993-01)

B-0227 ACUR, HOND - (1992-00)

B-0228 FORD, MAZD - 122 (1993-03)

B-0229 DODT, MITS - 144 (1985-05)

B-0230 EAGL, MITS, PLYM - 144 (1993-05)

B-0232 DODG, MITS, CHYL - 143,148, 148 (1989-05)

B-0233 TOYO - (1990-94)

B-0234 VOLV - (1985-95)

B-0235 CHEV, TOYO - 110 (1992-97)

B-0236 CHEV, TOYO - 98 (1988-97)

B-0237 TOYO - (1986-92)

B-0239 ACUR, TOYO - (1988-08)

B-0240 TOYO - (1988-95)

B-0241 CHEV - 61 (1989-00)

B-0244 ACUR, ISUZ, HOND - (1990-02)

B-0245 DODG, PLYM, CHYL - 122 (1995-05)

B-0246 DODG, EAGL, MITS, PLYM, CHYL - 122 (1993-99)

B-0247 ACUR - (1994-01)

B-0248 FORD - 183, 192 (1989-95)

B-0249 MERC, NISS, INFI - 183, 201 (1985-04)

B-0251 NISS, INFI - (1990-97)

B-0252 VOLV - (1993-10)


B-0253 MITS - (1994-96)

B-0254 SUBU - (1990-01)

B-0255 DODG, EAGL, PLYM, CHYL - 215 (1993-10)

B-0256 MITS - (1994)

B-0257 LEXU, TOYO - (1994-06)

B-0258 MERC, FORD - 121 (1995-04)

B-0259 DODG, MITS, CHYL - 152, 181 (1989-05)

B-0262 VOLK - (1993-02)

B-0263 HOND - (1995-97)

B-0264 KIA - (1995)

B-0265 DODG, JEEP, PLYM, CHYL - 148 (1995-10)

B-0266 MAZD - (1995-98)

B-0271 TOYO - (1995-04)

B-0272 CHEV, SUZI - 79 (1989-97)

B-0273 CHEV, OLDS, PONT - 207 (1991-97)

B-0276 FOTR, MAZD - 140, 153 (1983-01)

B-0277 SUBU - (1996-99)

B-0279 ACUR, HYUN - (1996-04)

B-0280 ACUR - (1996-04)

B-0281 KIA - (1995-02)

B-0282 HYUN - (2001-11)

B-0283 MERC, FORD - 121, 122 (1997-04)

B-0285 SATU, CADL - 181, 197 (1997-05)

B-0286 ACUR, HOND - (1997-08)

B-0287 MITS - (1995-12)

B-0288 MITS - (1992-02)

B-0289 MITS - (1991-02)

B-0291 VOLK - (1998-06)

B-0294 FOTR, MERC, FORD - 121 (1995-04)

B-0295 DODG, CHYL - 197, 215 (1993-10)

B-0296 VOLK - (1998-00)

B-0297 AUDI, VOLK - (1992-06)

B-0298 LEXU, TOYO - (1990-10)

B-0299 SUBU - (1985-94)

B-0300 SUBU - (1985-94)

B-0301 VOLK - (1996-06)

B-0302 KIA - (1995-04)

B-0303 ACUR, ISUZ, HOND - (1992-04)

B-0304 SUBU - (1990-01)

B-0305 ISUZ, DAEW - (1998-03)

B-0306 AUDI, VOLK - (1997-06)

B-0307 SUBU - (1999-12)

B-0308 MAZD - (1999-01)

B-0309 DAEW - (1999-02)

B-0310 CHEV, DAEW, PONT - 98 (1999-11)

B-0311 VOLV - (1993-10)

B-0312 ACUR, HOND - (2001-05)

B-0313 HYUN, KIA - (1999-06)

B-0314 HYUN, KIA - (1999-06)

B-0315 HYUN, KIA - (1999-12)

B-0318 KIA - (2001-05)

B-0320 MITS - (2003-12)

B-0323 HYUN, KIA - (2002-06)

B-0329 ACUR, SATU, HOND - (1998-14)

B-0330 AUDI - (2002-06)

NUMERICAL LISTING

287


B-0331 VOLV - (1993-10)

B-0332 MITS - (1993-12)

B-0333 VOLK - (2004-05)

B-0334 AUDI, VOLK - (2005-13)

BALANCE SHAFT SPROCKETS567 DODG, DODT, MITS, PLYM, CHYL, MAZD - 122,

156 (1976-89)

S642 DODG, DODT, JEEP, PLYM, CHYL - 135, 148, 153

(1981-10)

S853 CHEV, OLDS, SATU, PONT - 122, 134, 145

(2000-14)


(2000-14)

S875 FOTR, MERC, MAZD - 244, 245 (1997-11)

S939 ACUR, HOND - (2002-15)

CAM SPROCKET2064 NISS - (1983-86)

S249 FOTR, MERC, FORD, FOTU - 215, 223, 239, 256,

272, 292, 312 (1964)

S255 CADL - 331, 365, 390 (1949-63)

S261 CHEV, GMC, STUD - 265, 283, 327, 348, 409

(1955-69)

S265 DODG, DODT, PLYM, CHYU - 218, 230, 251, 265

(1968)

S273 DESO, DODG, PLYM, CHYU, CHYL - 270, 315,

317, 318, 325, 326, 331, 354, 392 (1989)

S284 MERC, FORD - 332, 352, 361, 390, 406 (1958-71)

S288 BUIC, CHEV, GMC, OLDS, WHIT, PONT - 200,

229, 262, 265, 267, 283, 302, 305, 307, 327, 350,

400 (2002)

S308 FOTR, MERC, FORD, FOTU - 144, 170, 200

(1983)

S326 FOTR, MERC, FORD - 221, 260, 289 (1962-69)

S328 AMC - 196 (1958-65)

S332 BUIC - 364, 401, 425 (1957-66)

S334 BUIC, JEEP, OLDS, OMC, PONT - 198, 215, 225,

231, 300, 340, 350 (1980)

S340 DODG, DODT, PLYM, CHYL - 361, 426, 440

(1959-78)

S344 OLDS - 371, 394 (1957-64)

S346 GMC - 322 (1956-59)

S348 BUIC, CHEV, OLDS, CADL, PONT - 260, 307,

330, 350, 403, 455 (1964-90)

S358 DODG, DODT, PLYM, CHYL - 273, 317, 318, 360

(1958-03)

S360 OLDS - 400, 425, 455 (1965-76)

S366 DODG, DODT, PLYM, CHYU, CHYL - 361, 383,

400, 440 (1979)

S370 CADL - 390, 429 (1959-67)

S380 DESO, DODG, DODT, PLYM, CHYL - 361, 383,

400, 413, 426, 440 (1958-79)

S388 AMC, JEEP, IHC - 199, 232, 258 (1964-90)

S390 BUIC, CHEV, GMC, OLDS, PONT - 200, 229, 262,

267, 283, 302, 305, 307, 327, 350, 400 (1957-02)

Part No. ApplicationCAM SPROCKET (Cont.)CAM SPROCKET (Cont.)

S392 CHEV, GMC - 396, 402, 427, 454 (1965-00)

S394 CHEV, GMC, WHIT - 366, 396, 402, 427, 454

(2000)

S396 FOTR, FORD - 360, 390, 428 (1961-76)

S398 BUIC - 400, 430, 455 (1967-76)

S402 DODG, DODT, PLYM, CHYL - 238, 317, 318, 340,

360 (1958-03)

S404 CADL - 368, 425, 429, 472, 500 (1964-84)

S406 FOTR, MERC, FORD - 289, 302, 351 (1963-01)

S410 FOTR, MERC, FORD - 330, 352, 359, 360, 361,

389, 390, 391, 410, 427, 428 (1958-78)

S420 FOTR, MERC, FORD, FOTU - 351, 400, 429, 460

(1997)

S422 MERC, FORD - 97, 98 (1971-73)

S426 CHEV, OLDS, PONT - 140 (1971-77)

S430 FOTR, MERC, FORD - 255, 302, 351 (1968-01)

S432 DODT - 361, 413 (1960-77)

S436 MERC, FORD - 351, 400 (1969-79)

S438 FOTR - 370, 429, 460 (1973-98)

S446 FOTR, MERC, FORD - 122, 140 (1974-97)

S448 FOTR - 360, 390 (1968-76)

S450 FOTR, MAZD - 110 (1971-78)

S456 DODG, FOTR, MAZD - 110, 122 (1972-87)

S458 DODG, DODT, MITS, CHYL, MAZD - 122, 135

(1974-89)

S462 NISS - (1969-89)

S494 BUIC, OLDS, PONT - 265, 301 (1977-81)

S500 GMC, ISUZ, OPEL - 111, 119 (1976-87)

S506 AMC, BUIC, CHEV, GMC, ISUZ, JEEP, OLDS,

PONT - 173, 189, 207 (1980-95)

S512 AMC, JEEP - 290, 304, 343, 360, 390, 401

(1966-91)

S524 GMC - 379, 395 (1982-02)

S540 MAZD - (1979-85)

S542 FOTR, MERC, FORD - 232 (1982-04)

S546 CADL - 252, 273 (1982-89)

S558 BUIC, CHEV, GMC, OLDS, CADL, PONT - 121,

122, 134 (1983-02)

S560 CHEV, TOYO - 98 (1980-97)

S594 TOYO - (1981-83)

S598 NISS - (1966-70)

S600 TOYO - (1981-95)

S608 AMC, DODT, EAGL, JEEP - 150, 153 (1983-02)


196, 231, 252 (1977-89)

S612 FOTR, MERC, FORD - 302, 351 (1968-01)

S616 DODG, DODT, PLYM, CHYL - 135 (1981-94)

S618 MERC, FORD - 140, 153 (1984-94)

S620 BUIC, CHEV, OLDS, CADL, PONT - 173, 189

(1985-95)

S622 TOYO - (1985-91)

S626 CHEV - 92 (1985-89)

S634 GMC - 350 (1980-96)

S636 FOTR, MERC, FORD, MAZD - 182 (1986-08)

S638 MERC, FORD - 116 (1985-96)

NUMERICAL LISTING

288


S650 FOTR, MERC, MAZD - 177, 245 (1986-00)

S656 BMW - (1980-85)

S658 AUDI, VOLK - (1973-02)

S670 DODG, EAGL, MITS, PLYM, HYUN - 90 (1985-94)

S674 SUBU - (1985-94)

S676 VOLV - (1976-95)

S686 NISS - (1989-90)

S688 JEEP - 242 (1987-06)

S690 BUIC, CHEV, OLDS, PONT - 151 (1982-92)


S694 NISS - (1989-97)

S698 NISS - (1983-89)

S700 FOTR, MERC, FORD - 232, 238, 256 (1982-08)

S704 BMW - (1985-93)

S706 CADL - 250, 273, 300 (1987-95)

S710 GMC - 366, 427 (1968-98)

S712 DODT, JEEP - 238, 318, 360 (1959-03)

S714 DODG, PLYM, CHYL - 153, 182 (1986-95)


S718 BUIC, OLDS, PONT - 231 (1988-91)

S720 NISS - (1991-99)

S724 NISS, INFI - (1991-02)

S726 BUIC, OLDS, PONT - 204 (1989-93)


305, 350 (1976-02)


S736 MERC, FORD - 281 (1991-11)

S740 MERC, FORD - 281 (1991-11)

S742 CHEV, PONT - 350 (1992-97)

S754 TOYO - (1991-04)

S756 BUIC, CHEV, OLDS, PONT - 189, 207 (1993-05)

S760 MERC, FORD - 281 (1991-11)

S762 MERC, FORD - 281 (1991-11)

S764 FOTR, MERC, FORD - 281, 330, 415 (1991-14)

S766 FOTR, MERC, FORD - 281, 330, 415 (1991-14)

S768 OLDS, CADL - 244 (1993-11)

S770 OLDS, CADL - 244 (1993-11)

S774 BUIC, CHEV, GMC, ISUZ, OLDS, PONT - 134

(1992-03)

S776 GMC, ISUZ, OLDS - 262 (1985-02)

S778 NISS - (1991-04)

S780 OLDS, CADL - 244 (1993-11)

S784 GMC, CADL - 350 (1996-02)

S786 SATU - 116 (1991-02)

S788 DODG, EAGL, PLYM, CHYL - 201, 230, 230,231,

231 (1990-10)

S790 MERC, FORD - 281 (1993-05)

S790P MERC, FORD - 281, 330, 354,355 (1993-14)

S804T BUIC, CHEV, OLDS, PONT - 146 (1996-02)

S806 GMC - 454 (1970-00)

S808 JEEP - 242 (1987-06)



S814 BUIC, CHEV, CADL, PONT - 265, 350 (1992-97)

S816 FOTR - 140 (1983-97)


S818 FOTR, MERC, FORD - 302 (1968-01)

S822 JEEP - 242 (1987-06)

S824 DODT, JEEP, MITS - 226 (2002-13)

S830 GMC - 454 (1970-00)

S832 DODT, JEEP - 226 (2002-13)

S834 GMC - 496 (2001-09)

S836 GMC, OLDS - 262 (1992-14)

S840 DODG, CHYL - 167 (1998-10)

S842 GMC - 496 (2001-09)

S846 SCI, TOYO - (2000-14)

S848 BUIC, CHEV, GMC, OLDS, SATU, PONT - 189,

207, 213, 213,214, 214, 237 (1993-11)


(2000-14)

S852 DODT, JEEP, MITS - 285 (1998-10)

S854 DODT, JEEP - 285 (1998-10)


S860 DODG, CHYL - 167 (1998-10)

S862 DODG, CHYL - 167 (1998-10)

S866 DODG, MITS, CHYL - 152, 181 (1995-12)

S868 DODT, JEEP, MITS - 226 (2002-13)

S870 DODT, JEEP, MITS - 285 (1998-10)

S878 BUIC, CHEV, GMC, HUM, ISUZ, CADL, PONT,

SAAB - 294, 323, 325, 346, 350, 364 (1997-13)

S884 NISS, INFI - (1995-01)

S886 NISS, INFI - (1995-01)

S888 NISS, INFI - (1995-01)

S892 GMC - 496 (2001-07)

S894 BUIC, CHEV, GMC, HUM, PONT, SAAB - 294,

323, 325, 364, 376, 378 (1999-14)

S896 DODG, DODT, JEEP, CHYL - 345, 370 (2003-14)

S898 FOTR, FORD, MAZD - 121, 122, 138, 365

(2001-15)

S908A BUIC, GMC, HUM, ISUZ, OLDS, SAAB - 169, 178,

211, 223, 256 (2002-12)

S926 HYUN, KIA - (2006-13)

S928 GMC - 262 (2002-14)

S934 DODG, JEEP, CHYL - 201, 230,231, 231 (1990-11)

S940 ACUR, HOND - (2002-15)

S1232 NISS, SUZI - (2005-14)

S8004 DODT, FOTR, MITS - 140 (1983-87)

S8026 NISS - (1983-86)

CRANK SPROCKETS127 DESO, DODG, DODT, PLYM, CHYU, CHYL - 218,

230, 239, 241, 251, 265 (1968)

S246 GMC, OLDS - 324, 371, 394 (1954-64)

S250 FOTR, MERC, FORD, FOTU - 215, 223, 239, 256,

272, 292, 312 (1964)

S256 CADL - 331, 365 (1949-58)

S262 CHEV, GMC, STUD - 265, 283, 327, 348, 409

(1955-69)

S266 DODG, DODT, PLYM, CHYU - 218, 230, 251, 265

(1968)

S274 CHYL, DESO, DODG, DODT, PLYM, WHTR,

CHYU, CHYL - 241, 259, 270, 276, 301, 315, 317,

318, 325, 326, 331, 354, 392 (2003)

NUMERICAL LISTING

289

Part No. ApplicationCRANK SPROCKET (Cont.)CRANK SPROCKET (Cont.)

S276 BUIC - 364, 401, 425 (1957-66)

S281 AMC, JEEP, IHC - 250, 287, 290, 304, 327, 343,

360, 390, 401 (1958-91)

S283 MERC, FORD - 383, 430, 462 (1958-68)

S289 BUIC, CHEV, GMC, OLDS, WHIT, PONT - 200,

229, 262, 265, 267, 283, 302, 305, 307, 327, 350,

400 (2002)

S291 DESO, DODG, DODT, PLYM, WHTR, CHYU,

CHYL - 170, 198, 225, 350, 361, 383, 413, 426

(1987)

S297 DODG, DODT, PLYM, CHYU, CHYL - 238, 315,

317, 318, 340, 354, 360 (2003)

S299 CADL - 390 (1959-63)

S303 DODT - 251, 265 (1953-68)

S319 GMC - 409 (1962-65)

S321 FOTR, MERC, FORD - 332, 352, 360, 361, 390,

410, 427, 428 (1958-76)

S323 BUIC, CHEV, GMC, JEEP, OLDS, OMC, CADL,

PONT - 181, 196, 198, 215, 225, 231, 252, 300,

340, 350 (1989)

S327 FOTR, MERC, FORD - 221, 260, 289 (1962-69)

S329 AMC - 196 (1958-65)

S331 FOTR, MERC, FORD - 330, 352, 360, 390, 410,

427, 428 (1958-77)

S339 CHYL, DESO, DODG, DODT, PLYM, CHYL - 225,

361, 383, 400, 413, 426, 440 (1987)

S347 GMC - 322 (1956-59)

S349 BUIC, CHEV, OLDS, CADL, PONT - 260, 307,

330, 350, 403, 455 (1964-90)

S353 FOTR - 359, 361, 389, 391 (1964-78)

S355 AMC, JEEP, IHC - 199, 232, 258 (1964-90)


(1958-03)

S361 OLDS - 400, 425, 455 (1965-76)

S365 CADL - 429 (1964-67)


(1958-79)

S369 BUIC - 400, 430, 455 (1967-76)

S375 GMC - 379, 395 (1982-02)


265, 267, 283, 302, 305, 307, 327, 350, 400

(1957-02)

S393 CHEV, GMC - 396, 402, 427, 454 (1965-00)

S395 CHEV, GMC, WHIT - 366, 396, 402, 427, 454

(2000)

S397 FOTR, MERC, FORD, FOTU - 144, 170, 200

(1983)

S401 FOTR - 370, 429 (1980-98)

S405 CADL - 368, 425, 472, 500 (1968-84)

S407 DODG, DODT, MITS, PLYM, CHYL, MAZD - 122,

156 (1974-89)

S411 DODG, DODT, PLYM - 105 (1978-83)

S417 DODG, DODT, PLYM, CHYL - 135 (1981-94)

S419 MERC, FORD - 116, 98 (1981-96)

S423 MERC, FORD - 97, 98 (1971-80)


S431 FOTR, MERC, FORD - 255, 289, 302, 351

(1963-01)

S445 AMC - 304, 360, 401 (1970-79)

S447 FOTR, MERC, FORD - 122, 140 (1974-97)

S449 FOTR, MAZD - 110, 122 (1971-84)

S451 FOTR, MAZD - 110, 122 (1971-84)

S453 FOTR, MAZD - 122 (1979-84)

S455 DODG, DODT, MITS, PLYM, CHYL, MAZD - 122,

156 (1974-89)

S463 NISS - (1969-89)

S475 FOTR, MERC, FORD - 351, 400 (1969-79)

S493 FOTR, MERC, FORD - 351, 400, 429, 460

(1968-97)

S495 BUIC, OLDS, PONT - 229, 265, 301 (1977-81)

S499 AMC - 121 (1977-79)

S501 GMC, ISUZ, OPEL - 111, 119 (1976-87)


350 (1978-85)

S505 CHEV, GMC, ISUZ, OLDS, PONT - 200, 229, 262,

350 (1978-02)

S511 AMC, BUIC, CHEV, GMC, ISUZ, JEEP, OLDS,

PONT - 173, 189, 207 (1980-95)

S515 AMC, JEEP - 290, 304, 343, 360, 390, 401

(1966-91)

S523 HOND - (1975-84)

S531 FOTR, MERC, FORD - 302, 351 (1968-01)

S533 CADL - 250, 252, 273, 300 (1982-95)

S539 FOTR, MERC, FORD - 232, 238, 256 (1982-08)

S543 MAZD - (1981-85)

S545 MAZD - (1981-85)

S549 BUIC, CHEV, GMC, ISUZ, OLDS, CADL, PONT -

121, 122, 134 (1983-03)

S551 CHEV, TOYO - 98 (1980-97)

S557 NISS - (1982-88)

S559 NISS - (1982-89)

S581 AUDI, VOLK - (1978-92)

S591 NISS - (1966-70)

S593 TOYO - (1981-04)

S605 DODG, PLYM - (1971-77)

S607 AMC, DODT, EAGL, JEEP - 150, 153 (1983-02)

S609 BUIC, OLDS, PONT - 181 (1985-88)

S611 CHEV, PONT - 85, 98 (1976-87)

S617 MERC, FORD - 140, 153 (1984-94)

S619 BUIC, CHEV, OLDS, CADL, PONT - 173, 189, 207

(1985-05)

S621 BUIC, OLDS, PONT - 181, 189, 204, 231 (1984-93)

S631 TOYO - (1985-91)

S633 DODG, EAGL, MITS, PLYM, HYUN - 90 (1985-94)

S640 DODG, DODT, PLYM, CHYL - 135, 153 (1981-95)

S641 CHEV, ISUZ - 92 (1985-89)

S645 CHEV, GMC, CADL - 350 (1980-02)


S651 FOTR, MERC, MAZD - 177, 245 (1986-00)


S663 AUDI, VOLK - (1982-06)

NUMERICAL LISTING

290


S669 SUBU - (1985-94)

S673 SUBU - (1985-94)

S677 VOLV - (1983-84)

S685 FOTR - 460 (1973-97)

S689 JEEP - 242 (1987-06)

S693 NISS - (1989-90)

S695 BUIC, OLDS, PONT - 151 (1985-91)

S699 NISS, INFI - (1989-04)

S701 NISS - (1983-89)

S703 BMW - (1985-93)

S709 DODG, PLYM, CHYL - 153 (1986-95)


S715 DODG, EAGL, PLYM, CHYL - 201, 230, 230,231,

231 (1990-10)

S717 GMC - 366, 427 (1968-98)

S719 CHEV, OLDS, PONT - 207 (1991-97)

S721 DODT, JEEP - 238, 318, 360 (1959-03)


S731 NISS - (1991-99)


S749 MERC, FORD - 182 (1986-07)

S751 MERC, FORD - 281 (1991-11)

S771 TOYO - (1991-97)

S773 SATU - 116 (1991-02)

S791 MERC, FORD - 281 (1991-11)

S795 OLDS, CADL - 244 (1993-11)

S797 BUIC, CHEV, GMC, CADL, PONT - 265, 305, 350

(1990-02)


S807 GMC - 395 (1992-02)

S809 JEEP - 242 (1987-06)


S813 FOTR - 140 (1983-97)

S815 GMC - 454 (1970-00)

S817 FOTR - 460 (1973-97)

S819 FOTR, MERC, FORD - 302 (1968-01)

S821 FOTR, MAZD - 245 (1990-00)

S827 BUIC, CHEV, GMC, HUM, ISUZ, CADL, PONT,

SAAB - 294, 323, 325, 346, 350, 364, 376, 378

(1997-14)

S831 GMC - 454 (1970-00)

S833 MERC, FORD - 155, 183 (1995-12)

S835 GMC, OLDS - 262 (1992-14)

S837 GMC - 496 (2001-09)

S839 DODG, CHYL - 167 (1998-10)

S843 FOTR, MERC, FORD - 281, 330, 415 (1991-14)

S847 BUIC, CHEV, GMC, OLDS, SATU, PONT - 189,

207, 213, 213,214, 214, 237 (1993-11)

S849 CHEV, GMC, OLDS, SATU, PONT - 122, 134, 145

(2000-14)

S851 CHEV, GMC, OLDS, SATU, PONT - 122, 134, 145

(2000-14)


S861 DODT, JEEP, MITS, CHYL - 226, 285 (1998-13)

S869 FOTR, MERC, FORD - 281, 330, 415 (1991-14)


S885 NISS, INFI - (1995-01)

S889 DODG, DODT, JEEP, CHYL - 345, 370 (2003-14)

S891 FOTR, FORD, MAZD - 121, 122, 138 (2001-15)

S901 DODG, PLYM - (1977-80)

S913 BUIC, GMC, HUM, ISUZ, OLDS, SAAB - 169, 178,

211, 223, 256 (2002-12)

S921 BUIC, CHEV, GMC, SATU, SUZI, CADL, PONT -

182, 217 (2004-14)

S927 DODG, JEEP, CHYL - 201, 230,231, 231 (1990-11)

S929 MERC, FORD, MAZD - 183 (1996-12)

S931 HYUN, KIA - (2006-13)

S933 HYUN, KIA - (2006-13)

S937 ACUR, HOND - (2002-15)

S1221 NISS, SUZI - (2005-14)

S1229 BUIC, SUZI, CADL - 170, 217 (2004-14)

S8005 DODT, FOTR, MITS - 140 (1983-87)

S8007 DODT, FOTR, MITS - 140 (1983-87)

IDLER SPROCKETS675 SUBU - (1985-94)

S737 NISS - (1991-99)

S863 DODT, JEEP, MITS, CHYL - 226, 285 (1998-13)

S865 DODT, JEEP, MITS - 285 (1998-10)


182, 217, 220 (2004-15)


182, 217, 220 (2004-15)

S1225 BUIC, SUZI, CADL - 170, 217 (2004-14)

S1227 BUIC, SUZI, CADL - 170, 217 (2004-14)

INTERMEDIATE SPROCKETS457 TOYO - (1971-82)

S490 TOYO - (1969-74)

S758 CHEV, OLDS, PONT - 207 (1991-97)

S772 BUIC, OLDS, CADL - 244, 281 (1993-11)

TIMING CHAIN3DR100 ACUR, JAGU, MAZD - (1949-87)

3DR102 DODG, DODT, MITS, NISS, PLYM, CHYL, MAZD -

122, 156 (1974-89)

3DR106 FOTR, MAZD - 110, 122 (1972-84)

3DR106D NISS - (1983-89)

3DR110 NISS - (1969-84)

3DR112D NISS - (1981-83)

3DR114 NISS, SAAB - (1974-88)

3DR122 MENZ - (1951-66)

3DR128 MENZ - (1955-62)

3DR130 BUIC, CHEV, OLDS, MENZ, PONT - 138 (1967-95)

3DR132 MENZ - (1951-66)

3DR136 MENZ - (1954-73)

3DR48 ALFA - (1970-94)

3DR54 NISS, NISS, AUDI, MGGB - (1965-82)

3DR60 TOYO, MGGB - (1947-89)

3DR62 TOYO, TRIU, MGGB - (1968-79)

3DR68 JAGU - (1956-62)

3DR72 RENL - (1966-84)

3DR74 ROVE - (1964-71)

NUMERICAL LISTING

291

Part No. ApplicationTIMING CHAIN (Cont.)TIMING CHAIN (Cont.)

3DR78 ROVE - (1952-73)

3DR82 JAGU - (1949-87)

3DR84 GMC - 111 (1972-75)

3DR90 MAZD, PEUG - (1974-87)

3DR94 NISS, BMW - (1963-81)

3DR98 PORS, TOYO - (1972-98)

3DRH48 NISS - (1991-04)

3SR102 NISS, TOYO, MAZD - (1989-04)

3SR106D NISS - (1983-89)

3SR44 DODG, EAGL, VOLV, AUDI, BMW, MAZD, PEUG -

182 (1963-11)

3SR52 MGGB - (1954-80)

3SR58 RENL - (1963-87)

3SR60 BUIC, CHEV, FOTR, GMC, HUM, ISUZ, MERC,

CADL, PONT, SAAB - 177, 294, 323, 325, 346,

350, 364 (1986-13)

3SR62 TRIU - (1961-80)

3SR64 AMC, DODT, EAGL, JEEP, PLYM, RENL - 150,

153 (1966-02)

3SR92 NISS, SATU - 116 (1989-02)

3SR94 DODG, EAGL, GMC, ISUZ, OPEL, VOLV, BMW,

MAZD, PEUG - 111, 119, 182 (1970-93)

3SR96 TOYO - (1981-95)

3SR98 TOYO - (1981-90)

3SRH106 TOYO - (1994-04)

3SRH124 NISS, INFI - (1991-02)

3SRH60 BUIC, CHEV, GMC, HUM, ISUZ, CADL, PONT,

SAAB - 294, 323, 325, 346, 350, 364, 376, 378,

427 (1997-14)

3SRH64 FOTR, MAZD - 245 (1990-00)

3SRH92 NISS - (1991-04)

4SR48 JEEP - 242 (1987-06)

4SR50 GMC - 366, 427, 454, 496 (1968-09)

8MMSR52 MAZD - (1981-85)

8MMSR54 FOTR, MAZD - 122 (1970-85)

8MMSR58 MAZD - (1984-91)

8MMSR60 TOYO - (1991-97)

8MMSR70 SUBU - (1987-95)

8MMSR84 MAZD - (1989-94)

8MMSR90 DODG, DODT, MITS, PLYM, CHYL, MAZD - 122,

156 (1976-89)

8MMSRH126 BUIC, OLDS, CADL - 244, 281 (1993-11)

8MMSRH62 BUIC, OLDS, CADL - 244, 281 (1993-11)

8MMSRH72 GMC, OLDS - 262 (1992-14)

8MMSRH82 TOYO - (1994-04)

160 DODG, DODT, PLYM, CHYU, CHYL - 238, 259,

270, 315, 317, 318, 340, 354, 360, 488 (2003)

161 FOTR - 272, 292 (1956-64)

162 CHEV, GMC - 348, 370, 409 (1957-65)

163 BUIC, CHEV, FOTR, GMC, MERC, OLDS, WHIT,

FORD, PONT - 200, 229, 262, 265, 267, 283, 302,

305, 307, 327, 350, 351, 400 (2002)

168 CHEV, CHYL, DESO, DODG, DODT, FOTR, GMC,

PLYM, WHIT, CHYL - 225, 361, 366, 370, 383,

396, 400, 402, 413, 426, 427, 429, 440, 454, 460

(2000)


169 FOTR, MERC, FORD - 330, 352, 359, 360, 361,

389, 390, 391, 410, 427, 428 (1958-78)

172 FOTR, MERC, BMW, FORD, MAZD - 110, 122, 97,

98 (1962-93)

180 BUIC, CHEV, GMC, OLDS, CADL, PONT - 260,

350 (1978-85)

181 GMC - 379, 395 (1982-02)

185 MERC, FORD - 281 (1991-11)

189 MERC, FORD - 281, 330 (1993-12)

190 NISS - (1991-99)

191 NISS - (1991-99)

192 SATU - 116 (1991-02)

193 DODG, CHYL - 167 (1998-10)

194 DODT, JEEP, MITS - 226 (2002-13)

195 BUIC, GMC, HUM, ISUZ, OLDS, SAAB - 169, 178,

211, 223, 256 (2002-12)

201 DODG, DODT, PLYM, CHYL - 135, 148, 153

(1981-10)

202 CHEV, GMC, CADL - 262, 350 (1980-02)

300 DODG, JEEP, CHYL - 201, 230,231, 231 (1990-11)

339 AMC, PONT - 196, 370 (1946-65)

344 FOTR, MERC, FORD, FOTU - 215, 223, 239, 256,

272, 292, 312 (1964)

347 GMC, PONT - 287, 288, 316, 317, 347 (1955-58)

348 CHYL, DESO, DODG, DODT, PLYM, WHTR,

CHYU, CHYL - 241, 259, 270, 276, 301, 315, 317,

318, 325, 326, 331, 354, 392 (2003)

349 AMC, JEEP, CADL, IHC - 250, 287, 290, 304, 322,

327, 343, 346, 360, 390, 401 (1942-91)

350 OLDS, PONT - 195, 326, 350, 389, 400, 421, 428,

455 (1959-79)

351 FOTR, MERC, FORD, FOTU - 144, 170, 200

(1983)

356 FOTR, MERC, FORD - 221, 260, 289 (1962-69)

357 AMC - 196 (1958-65)

358 FOTR, MERC, FORD - 255, 289, 302, 351

(1963-01)

359 BUIC, CHEV, GMC, JEEP, OLDS, OMC, CADL,

MGGB, PONT - 181, 196, 198, 215, 225, 231, 252,

300, 340, 350 (1989)

361 DODG, DODT, PLYM, CHYL - 273, 317, 318, 360

(1958-03)

365 AMC, BUIC, FOTR, MERC, OLDS, FORD, PONT -

196, 232, 265, 301 (1958-04)

370 BUIC, CHEV, FOTR, GMC, ISUZ, MERC, OLDS,

CADL, FORD, PONT - 121, 122, 134, 302

(1968-03)

373 AMC, BUIC, CHEV, GMC, ISUZ, JEEP, OLDS,

PONT - 173, 189, 207, 303 (1949-95)

374 AMC, FOTR, JEEP, MERC, FORD, MAZD - 182,

290, 304, 343, 360, 390, 401 (1966-08)

375 BUIC, CHEV, OLDS, PONT - 231 (1988-05)

376 FOTR, MERC, FORD - 232, 238, 256 (1982-08)

377 BUIC, OLDS, PONT - 204 (1989-93)


NUMERICAL LISTING

292


380 DODT, JEEP - 238, 318, 360, 488 (1959-03)

381A BUIC, CHEV, OLDS, PONT - 231 (1990-09)

382 CHEV, OLDS, PONT - 207 (1991-97)


383M BUIC, CHEV, OLDS, PONT - 138 (1987-95)

384 BUIC, OLDS, PONT - 138 (1992-94)

384M BUIC, OLDS, PONT - 138 (1992-94)

385 BUIC, CHEV, ISUZ, JEEP, OLDS, CADL, PONT -

173, 189, 207, 242, 262 (1985-06)

387 FOTR, MERC, FORD - 281 (1991-13)

388 DODG, EAGL, PLYM, CHYL - 201, 230, 230,231,

231 (1990-10)


391 FOTR, MERC, FORD - 330, 415 (1997-14)

392 MERC, FORD - 155, 183 (1995-12)

393 DODT, JEEP, MITS, CHYL - 226, 285 (1998-13)

394 DODT, JEEP, MITS - 285 (1998-10)

395 BUIC, CHEV, GMC, ISUZ, OLDS, CADL, PONT -

121, 122, 134 (1983-03)

396 FOTR, MERC, FORD, MAZD - 182 (1986-08)

397 DODG, CHYL - 167 (1998-10)

491 BUIC, FOTR, MERC, FORD, FOTU - 322, 364,

383, 401, 425, 429, 430, 460, 462 (1997)

494 AMC, CHEV, DODT, FOTR, GMC, JEEP, MERC,

OLDS, FORD, IHC - 199, 232, 251, 258, 265, 324,

332, 348, 351, 352, 360, 361, 371, 390, 394, 400,

406, 409, 410, 425, 427, 428, 455 (1953-90)

495 CHEV, DESO, DODG, DODT, PLYM, WHTR,

CHYU, CHYL - 170, 198, 225, 350, 361, 383, 396,

413, 426 (1987)

498 BUIC, CHEV, FOTR, MERC, OLDS, CADL, FORD,

PONT - 260, 307, 330, 350, 351, 368, 400, 403,

425, 430, 455, 472, 500 (1964-90)

499 BUIC, CHEV, GMC, ISUZ, OLDS, CADL, PONT -

200, 229, 262, 265, 267, 283, 302, 305, 307, 327,

331, 350, 365, 400, 429 (1949-02)

501 CHEV, DODG, DODT, GMC, PLYM, CHYU, CHYL

- 361, 383, 396, 400, 402, 427, 440, 454 (2000)

503 CADL - 250, 252, 273, 300 (1982-95)

505 CHEV, GMC, JEEP, MERC, CADL, CONT, FORD,

STUD - 140, 153, 226, 265, 283, 327, 390, 429

(1994)

507 GMC - 454 (1970-00)

700 BUIC, CHEV, FOTR, GMC, MERC, OLDS, SATU,

PONT - 189, 207, 213, 213,214, 214, 237, 302

(1968-11)

704 DODG, DODT, JEEP, CHYL - 345, 370 (2003-14)

705 FOTR, MERC, MAZD - 138, 140 (2001-12)

706F FOTR, FORD, MAZD - 121, 122, 138 (2001-15)

708 MERC, FORD, MAZD - 183 (1996-12)

711F ACUR, HOND - (2002-15)

712F ACUR, HOND - (2002-15)

719 NISS, SUZI - (2005-14)

721 NISS, SUZI - (2005-14)

727F FOTR, FORD, MAZD - 121, 122 (2004-15)


728F GMC, HUM, ISUZ - 169, 178, 211, 223 (2004-12)

753 BUIC, CHEV, GMC, SATU, SUZI, CADL, PONT -

182, 217, 220 (2004-15)

754 BUIC, CHEV, GMC, SATU, SUZI, CADL, PONT -

182, 217, 220 (2004-15)

900C HYUN, KIA - (2006-13)

901C HYUN, KIA - (2006-13)

1007 BUIC, SUZI, CADL - 170, 217 (2004-14)

1044 BUIC, SUZI, CADL - 170, 217 (2004-14)

4178C INFI - (1990-96)

4179C INFI - (1990-96)

4201F CHEV, GMC, OLDS, SATU, PONT - 122, 134, 145

(2000-14)

4202F CHEV, GMC, OLDS, SATU, PONT, SAAB - 122,

134, 145 (2000-14)

4207C NISS, INFI - (1995-01)

4208C NISS, INFI - (1995-01)

4214C SCI, TOYO - (2000-14)

TIMING COVERMIC100 FOTR, MERC, FORD - 122, 140 (1974-97)

MIC200 MERC, FORD - 116 (1985-96)

MOC200 MERC, FORD - 116 (1985-96)

MOC300 TOYO - (1981-95)

CAM GEAR2050 NISS - (1981-83)

2202 TOYO - (1960-87)

2500 CHEV, GMC - 217, 235, 248, 261, 270, 302

(1939-62)

2514 CHEV, GMC - 217, 235, 248, 261, 270, 302

(1939-62)

2524 BUIC, CHEV, GMC, OLDS, PONT, STUD - 151,

153, 194, 230, 250 (1962-92)

2526 CHEV, GMC, OLDS, PONT - 250, 292 (1963-89)

2534 OMC, MERC - 283, 305, 307, 327, 350

2542 AMC, BUIC, CHEV, GMC, JEEP, OLDS, PONT,

STUD - 151, 153, 194, 215, 230, 250 (1962-93)

2544 BUIC, OLDS, PONT - 151 (1985-91)

2620 CONT

2652 CONT

2652A CONT

2660 CONT

2702 FOTR, MERC, FORD - 239, 255 (1932-53)

2733 FOTR, FOTU - 302, 332 (1963)

2900 HENR, JEEP, WHIT - 134 (1973)

3320 IHC - 537 (1980)

3342 FOTR, IHC - 420, 444, 445 (1983-04)

4706 FOTT, FOTR, MERC, FORD - 221, 239 (1932-53)

CRANK GEAR2051 NISS - (1981-83)

2203 TOYO - (1960-87)

2501 BUIC, CHEV, GMC, OLDS, PONT, STUD - 153,

194, 215, 217, 230, 235, 250, 261 (1940-84)

2527 CHEV, GMC - 250, 292 (1963-89)

2535 OMC, MERC - 283, 305, 307, 327, 350

NUMERICAL LISTING

293

Part No. ApplicationCRANK GEAR (Cont.)CRANK GEAR (Cont.)

2537 AMC, BUIC, CHEV, GMC, JEEP, OLDS, PONT -

151, 250 (1966-93)

2603 CASE, CONT, OLTR - 226

2661 CONT

2701 FOTR, MERC, FORD - 239, 255 (1932-53)

2737 FOTR, FOTU - 401, 475, 477, 534 (1981)

2748 FOTR, FOTU - 262 (1964)

2843 GMC - 401,

419,420,421,423,425,426,427,428,429,430,434,43-

5,436,439,440,441,442,444,445,446, 702 (1960-74)

2847 GMC - 636 (1965-74)

2881 DETD

2883 DETD

2901 HENR, JEEP, WHIT - 134 (1973)

3033 HERC

3315 IHC - 466 (1990-12)

3321 IHC - 537 (1980)

3341 FOTR, IHC - 420, 444, 445 (1983-04)

5401 WAUK, OLTR - 129, 144, 180, 190, 216, 231, 265

GEAR SET2516S CHEV, GMC - 217, 235, 261 (1940-62)

2525S CHEV, GMC, OLDS, PONT, STUD - 153, 194, 230,

250 (1962-84)

2528S CHEV, GMC, OMC, MERC - 153, 181, 250, 292

(1989)

2538S BUIC, CHEV, GMC, OLDS, PONT - 151, 250

(1966-92)

2540S CHEV, GMC, OLDS, PONT - 250 (1966-84)

2542S AMC, BUIC, CHEV, GMC, JEEP, OLDS, PONT -

151, 250 (1968-93)

2544S BUIC, OLDS, PONT - 151 (1985-91)

2727S FOTR, MERC, FORD - 239, 255 (1932-53)

2750AS FOTR, FORD - 240, 300 (1965-96)

2760SA FOTR, MERC, FORD - 171 (1974-85)

2764S FOTR, FORD, FOTU - 240, 300 (1996)

2766AS FOTR, FORD - 240, 300 (1965-96)

2766S FOTR, FORD - 240, 300 (1965-96)

3320S IHC - 537 (1980)

3327S IHC

3335S IHC - 404, 446 (1980)

3336S IHCT, IHC - 152, 196, 266, 304, 345, 392 (1985)

3342S FOTR - 420, 445 (1983-03)

3504S DODT - 331, 354 (1954-59)

3512S DODT - 361 (1960-77)

4710S FOTT, FOTU - 134, 144, 172 (1964)

IDLER GEAR2842 GMC - 401,

419,420,421,423,425,426,427,428,429,430,434,43-

5,436,439,440,441,442,444,445,446, 702 (1960-74)

2845 GMC - 636 (1970-72)

3PC SET3-3DR130 ACUR, BUIC, CHEV, OLDS, PONT - 138 (1987-14)

3-3SR60 FOTR, MERC, PONT - 177, 323 (1986-08)

3-3SR64 AMC, DODT, EAGL, JEEP - 150, 153 (1983-02)

Part No. Application3PC SET (Cont.)3PC SET (Cont.)

3-3SR92A SATU - 116 (1991-02)

3-3SRH60S BUIC, CHEV, GMC, HUM, PONT, SAAB - 294,

323, 325, 364, 376, 378 (1999-14)

3-3SRH60SA BUIC, CHEV, GMC, HUM, ISUZ, CADL, PONT,

SAAB - 294, 323, 325, 346, 350, 364 (1997-13)

3-3SRH64 FOTR, MAZD - 245 (1990-00)

3-3SRH64A FOTR, MAZD - 245 (1990-00)

3-4SR48 JEEP - 242 (1987-06)

3-4SR50 GMC - 366, 427 (1968-98)

3-4SR50SA GMC - 454 (1970-00)

3-4SR50SB GMC - 496 (2001-09)

3-4SR50SC GMC - 496 (2001-09)

3-4SR50SD GMC - 496 (2001-07)

3-4SR50SE GMC - 454 (1970-00)

3-8MMSRH72S GMC, OLDS - 262 (1992-14)

3-8MMSRH72-SA

GMC - 262 (2002-14)

3-160S ACUR, ALFA, CHEV, DODG, DODT, PLYM, CHYL,

AMC - 238, 317, 318, 340, 343, 360, 85 (1958-03)

3-163S ALFA, BUIC, CHEV, GMC, OLDS, WHIT, PONT -

200, 229, 262, 265, 267, 283, 302, 305, 307, 327,

350, 400 (2002)

3-163SA FOTR, MERC, FORD - 302, 351 (1968-95)

3-163SB FOTR, MERC, FORD - 302, 351 (1968-01)

3-168S DODG, DODT, PLYM, CHYL - 361, 413, 426, 440

(1960-78)

3-168SA DESO, DODG, DODT, PLYM, CHYL - 361, 383,

400, 413, 426, 440 (1958-79)

3-168SC FOTR - 370, 429 (1980-98)

3-168SD FOTR - 460 (1973-97)

3-168SE FOTR - 460 (1973-97)

3-169S FOTR, MERC, FORD - 330, 352, 360, 390, 410,

427, 428 (1958-77)

3-169SA FOTR - 330, 359, 361, 389, 391 (1964-78)

3-171S CHEV, GMC, WHIT - 366, 396, 402, 427, 454

(2000)

3-172S MERC, FORD - 97, 98 (1971-73)

3-181S GMC - 379, 395 (1982-02)

3-181SA GMC - 395 (1992-02)

3-192SA SATU - 116 (1991-02)

3-202S GMC - 350 (1980-96)

3-202SA GMC, CADL - 350 (1996-02)

3-344S FOTR, MERC, FORD, FOTU - 215, 223, 239, 256,

272, 292, 312 (1964)

3-349S AMC, JEEP - 290, 304, 343, 360, 390, 401

(1966-91)

3-350S OLDS, PONT - 195, 326, 350, 389, 400, 421, 428,

455 (1959-79)

3-351S FOTR, MERC, FORD, FOTU - 144, 170, 200

(1983)

3-356S FOTR, MERC, FORD - 221, 260, 289 (1962-69)

3-358S FOTR, MERC, FORD - 289, 302, 351 (1963-01)

3-358SA FOTR, MERC, FORD - 255, 302, 351 (1968-01)

3-359S BUIC, JEEP, OLDS, OMC, PONT - 198, 215, 225,

231, 300, 340, 350 (1980)

NUMERICAL LISTING

294


3-359SB BUIC, CHEV, GMC, OLDS, CADL, PONT - 181,

196, 231, 252 (1977-05)

3-359SC BUIC, OLDS, PONT - 181, 231 (1984-88)

3-361S DODG, DODT, PLYM, CHYL - 273, 317, 318, 360

(1958-03)

3-365S BUIC, OLDS, PONT - 265, 301 (1977-81)

3-365SA FOTR, MERC, FORD - 232 (1982-04)

3-370S BUIC, CHEV, GMC, OLDS, CADL, PONT - 121,

122, 134 (1983-02)

3-370SA BUIC, CHEV, GMC, OLDS, PONT - 134 (1992-03)

3-372S BUIC, CHEV, OLDS, CADL, PONT - 173, 189

(1985-95)

3-373S AMC, BUIC, CHEV, GMC, ISUZ, JEEP, OLDS,

PONT - 173, 189, 207 (1980-95)

3-374S FOTR, MERC, FORD, MAZD - 182 (1986-08)

3-374SA AMC, JEEP - 290, 304, 343, 360, 390, 401

(1966-91)

3-375S BUIC, OLDS, PONT - 231 (1988-91)

3-375SA BUIC, CHEV, OLDS, PONT - 231 (1988-05)

3-376S FOTR, MERC, FORD - 232, 238, 256 (1982-08)

3-377S BUIC, OLDS - 204 (1989-93)

3-377SA BUIC, OLDS, PONT - 204 (1989-93)

3-378S BUIC, OLDS, PONT - 151 (1985-91)


3-380S DODT, JEEP - 238, 318, 360 (1959-03)

3-380SA DODT - 238 (1987-03)

3-381AS BUIC, CHEV, OLDS, PONT - 231 (1990-09)

3-381ASB BUIC, CHEV, OLDS, PONT - 231 (1991-09)

3-382S CHEV, OLDS, PONT - 207 (1991-97)

3-383S BUIC, CHEV, OLDS, PONT - 138 (1987-95)

3-384S BUIC, OLDS, PONT - 138 (1992-94)

3-385S BUIC, CHEV, OLDS, PONT - 189, 207 (1993-05)

3-388S DODG, EAGL, PLYM, CHYL - 201, 230, 230,231,

231 (1990-10)

3-390S BUIC, CHEV, OLDS, PONT - 146 (1996-02)

3-395S BUIC, CHEV, GMC, ISUZ, OLDS, PONT - 134

(1992-03)

3-396S FOTR, MERC, FORD, MAZD - 182 (1986-08)

3-489S CHEV, GMC, STUD - 265, 283, 327 (1955-69)

3-491S FOTR, MERC, FORD, FOTU - 429, 460 (1997)

3-491SA FOTR, MERC, FORD - 429, 460 (1968-78)

3-494S AMC, JEEP, IHC - 199, 232, 258 (1964-90)

3-494SA FOTR, MERC, FORD - 352, 360, 390, 410, 427,

428 (1958-76)

3-494SB FOTR, MERC, FORD - 351, 400 (1969-82)

3-494SC FOTR - 360, 390 (1968-76)

3-494SD OLDS - 400, 425, 455 (1965-76)

3-495S DODG, DODT, PLYM, WHTR, CHYL - 170, 198,

225 (1960-87)

3-498S CADL - 368, 425, 472, 500 (1968-84)

3-498SA BUIC - 400, 430, 455 (1967-76)

3-498SB FOTR, MERC, FORD - 351, 400 (1969-79)

3-498SC BUIC, CHEV, OLDS, CADL, PONT - 260, 307,

330, 350, 403, 455 (1964-90)

3-499S BUIC, CHEV, GMC, OLDS, PONT - 262, 267, 283,

302, 305, 307, 327, 350, 400 (1957-02)


3-499SA CHEV, GMC, PONT - 200, 229, 262, 350 (1978-96)

3-501S CHEV, GMC - 396, 402, 427, 454 (1965-00)

3-501SA CHYL, DODG, DODT, PLYM, CHYU, CHYL - 361,

383, 400, 440 (1979)

3-503S CADL - 252, 273 (1982-89)

3-503SB CADL - 250, 273, 300 (1987-95)

3-505S MERC, FORD - 140, 153 (1984-94)

3-506SB CHEV, GMC, OLDS, MERC, PONT - 262 (1996)

3-506SC BUIC, CHEV, GMC, OLDS, CADL, PONT - 305,

350 (1976-02)

3-506SE BUIC, GMC, CADL - 305, 350 (1990-02)

3-507S GMC - 454 (1970-00)

3-509S GMC, ISUZ, OLDS, MERC - 262 (2002)

3-509SA BUIC, CHEV, CADL, PONT - 265, 350 (1992-97)

3-509SB CHEV, PONT - 350 (1992-97)

3-700S BUIC, CHEV, GMC, OLDS, SATU, PONT - 189,

207, 213, 213,214, 214, 237 (1994-10)

3-700SA FOTR, MERC, FORD - 302 (1968-01)

3-3235S DODG, JEEP, CHYL - 201, 230,231, 231 (1990-11)

BALANCE SHAFT ELIMINATION KITBSEK122 DODG, DODT, MITS, PLYM, CHYL, MAZD - 122,

156 (1976-89)

TIMING KIT3DR102-1 NISS - (1980-86)

3DR102-2 DODG, DODT, MITS, PLYM, CHYL, MAZD - 122,

156 (1974-89)

3DR106-2 MAZD - (1979-84)

3DR106-3 FOTR, MAZD - 122 (1979-84)

3DR106D-1 NISS - (1983-89)

3DR110-1 NISS - (1969-74)

3DR110-2 NISS - (1970-84)

3DR110-3 NISS - (1975-83)

3DR114-1 NISS - (1974-80)

3DR54-1 NISS - (1973-82)

3DR60-1 TOYO - (1971-89)

3DR62-1 TOYO - (1969-74)

3DR98-1 TOYO - (1975-90)

3SR102-1 NISS - (1989-97)

3SR92-1 NISS - (1989-90)

3SR94-1 GMC, ISUZ, OPEL - 111 (1976-84)

3SR94-2 GMC, ISUZ - 119 (1982-87)

3SR96-1 TOYO - (1981-95)

3SR96-1HD TOYO - (1981-95)

3SR98-1 TOYO - (1981-90)

8MMSR90-1 DODG, DODT, MITS, PLYM, CHYL, MAZD - 122,

156 (1976-89)

3-3DRH48 NISS - (1991-04)

3-3SR60AS FOTR - 177 (1986-92)

3-3SR64S AMC, DODT, EAGL, JEEP - 150, 153 (1983-02)

3-3SR92 SATU - 116 (1991-02)

3-3SRH106 TOYO - (1994-04)

3-3SRH124S NISS, INFI - (1991-02)

3-3SRH64AS FOTR, MAZD - 245 (1990-00)

3-3SRH64S FOTR, MAZD - 245 (1990-00)

NUMERICAL LISTING

295

Part No. ApplicationTIMING KIT (Cont.)TIMING KIT (Cont.)

3-8MMSRH62S BUIC, OLDS, CADL - 244, 281 (1993-11)

3-8MMSRH62-SA

OLDS, CADL - 244 (1993-11)

3-102S DODG, DODT, MITS, PLYM, CHYL, MAZD - 122,

156 (1976-89)

3-191S NISS - (1991-99)

3-192S SATU - 116 (1991-02)

3-195S BUIC, GMC, ISUZ, OLDS, SAAB - 256 (2002-09)

3-195SA GMC, HUM, ISUZ - 178, 223 (2007-12)

3-195SB GMC, ISUZ, SAAB - 256 (2002-09)

3-195SC GMC, HUM, ISUZ - 169, 211 (2004-06)

3-383SB BUIC, CHEV, OLDS, PONT - 138 (1987-95)

3-385SA JEEP - 242 (1987-06)

3-385SB JEEP - 242 (1987-06)

3-385SC BUIC, CHEV, OLDS, PONT - 189, 207 (1993-05)

3-387SA FOTR, MERC, FORD - 281 (1991-13)

3-387SAX FOTR, MERC, FORD - 281 (1991-13)

3-387SC FOTR, MERC, FORD - 281 (1991-13)

3-387SG FOTR, MERC, FORD - 281 (1991-13)

3-387SGF MERC, FORD - 281 (1993-05)

3-387SGX FOTR, MERC, FORD - 281 (1991-13)

3-387SHF MERC, FORD - 281 (1993-05)

3-387SIF FOTR, MERC, FORD - 281 (1991-13)

3-387SJF FORD - 281 (1996-01)

3-387SKF FORD - 281 (1996-04)


3-391S FOTR, MERC - 330, 415 (1997-14)

3-391SA MERC - 330 (1999-04)

3-391SB FOTR - 415 (1997-13)

3-391SC FOTR, MERC - 330 (1997-14)

3-391SD FOTR - 415 (1997-13)

3-391SE MERC, FORD - 330 (1999-12)

3-391SG FOTR - 415 (1997-13)

3-392S MERC, FORD - 155, 183 (1995-12)

3-393S DODT, JEEP - 285 (1998-10)

3-393SA DODT, JEEP - 226 (2002-13)

3-393SB DODT, JEEP, MITS - 226 (2002-13)

3-393SC DODT, JEEP, MITS - 285 (1998-10)

3-393SD DODT, JEEP - 226 (2002-13)

3-393SX DODT, JEEP - 285 (1998-10)

3-397S DODG, CHYL - 167 (1998-10)

3-397SA DODG, CHYL - 167 (1998-10)

3-397SB DODG, CHYL - 167 (1998-10)

3-397SBX DODG, CHYL - 167 (1998-10)

3-397SX DODG, CHYL - 167 (1998-10)

3-398S FOTR, MERC, FORD, MAZD - 244, 245 (1997-11)

3-398SA FOTR, MERC, FORD, MAZD - 244, 245 (1997-11)

3-505SA MERC, FORD - 140, 153 (1984-94)

3-700SB BUIC, CHEV, GMC, OLDS, SATU, PONT - 189,

207, 213, 213,214, 214, 237 (1993-09)

3-704S DODG, DODT, JEEP, CHYL - 345, 370 (2003-14)

3-705S FOTR, MAZD - 138 (2001-12)

3-705SX FOTR, MAZD - 138 (2001-12)

3-708S MERC, FORD, MAZD - 183 (1996-12)

3-708SA MERC, FORD, MAZD - 183 (1996-12)

Part No. ApplicationTIMING KIT (Cont.)TIMING KIT (Cont.)

3-711S HOND - (2002-14)

3-724S NISS - (2000-06)

3-727S FOTR, FORD, MAZD - 121, 122 (2004-15)

3-752S LEXU, SCI, TOYO - (2001-13)

3-753S BUIC, CHEV, GMC, SATU, SUZI, CADL, PONT -

182, 217, 220 (2004-15)

3-900CS HYUN, KIA - (2006-13)

3-900CSA HYUN, KIA - (2006-13)

3-0250S MAZD - (2003-13)

3-0420S TOYO - (2000-06)

3-0430S NISS - (2007-13)

3-0460S NISS - (2004-13)

3-0470S TOYO - (2003-13)

3-0490S TOYO - (2005-13)

3-0719S NISS - (2005-14)

3-1007S BUIC, SUZI, CADL - 170, 217 (2004-14)

3-4167S TOYO - (1995-04)

3-4198S SUZI - (1996-12)

3-4200SA CHEV, TOYO, PONT - 110 (1998-08)

3-4201S CHEV, OLDS, SATU, PONT - 122, 134, 145

(2000-14)

3-4201SX CHEV, GMC, OLDS, SATU, PONT - 122, 134, 145

(2000-14)

3-4202S CHEV, OLDS, SATU, PONT - 122, 134, 145

(2000-14)

3-4207S NISS, INFI - (1995-01)

3-4207SX NISS, INFI - (1995-01)

3-4210SA NISS - (1991-04)

3-4212S NISS - (2002-13)

3-4212SA NISS, SUZI - (2002-13)

3-4214SA SCI, TOYO - (2000-14)

B-036-1 TOYO - (1988-97)

B-041-1B HOND - (1975-84)

B-070-1 CHEV, TOYO - 98 (1980-88)

B-0114-1 DODG, PLYM, CHYL - 153 (1986-95)

CAMSHAFT SPROCKET ACTUATORVCTA-1000 FOTR, MERC, FORD - 281, 330 (2004-14)

VARIABLE CAM TIMING SOLENOIDVCTS-1000 FOTR, MERC, FORD - 281, 330 (2004-14)

VARIABLE CAM TIMING HOUSINGVCTH-1000L FOTR, MERC - 330 (2004-14)

VCTH-1000R FOTR, MERC - 330 (2004-14)

NUMERICAL LISTING

296

NUMERICAL LISTING

ABBREVIATIONS USED TO

INDICATE CAR, TRUCK MANUFACTURERS

BUIC:

CADL:

CHEV:

CHYL:

FORD:

HUM:

ISUZ:

OLDS:

PONT:

SAAB:

40201

40202

40203

40204

40205

40206

40210

40217

40400

40401

40402

40403

40404

40405

40406

40407

40408

40409

40410

40500

40510

40520

48500T-9

48500W-9

48510T-9

48510W-9

48520T-9

48520W-9

48530T-9

48551T-9

48560T-9

48561T-9

PERFORMANCE - BUICK

PERFORMANCE - CADILLAC

PERFORMANCE - CHEVROLET CARS & TRUCKS

PERFORMANCE - CHRYSLER PRODUCTS

PERFORMANCE - FORD PRODUCTS & TRUCKS

PERFORMANCE - HUMMER

PERFORMANCE - ISUZU

PERFORMANCE - OLDSMOBILE

PERFORMANCE - PONTIAC

PERFORMANCE - SAAB

CHEV - 262, 267, 283, 302, 305, 307, 327, 350,

400 (1957-04)

DODG, CHYL - 273, 318, 340, 360 (1965-03)

CHYL - 361, 383, 400, 413, 426, 440 (1959-78)

FORD - 352, 360, 390, 406, 427, 428 (1958-76)

CHEV - 396, 400, 402, 427, 454 (1965-97)

FORD - 260, 289, 302, 351 (1962-01)

BUIC - 350 (1972-81)

DODG, CHYL - 426, 440 (1978)

CHEV, PONT - 229, 262, 267, 283,

302, 305, 307, 327, 350, 400 (2004)

CHEV - 396, 400, 402, 427, 454, 502

(1997)

DODG, FORD - 260, 289, 302, 340, 351 (2001)

FORD - 429, 460 (1997)

BUIC - 181, 231, 252 (1977-87)

FORD - 351, 400 (1970-82)

CHYL - 273, 318, 340, 360 (2003)

CHYL - 361, 383, 400, 413, 426, 440 (1978)

PONT - 326, 350, 389, 400, 421, 428, 455

(1959-77)

OLDS - 260, 400, 403, 425, 455 (1965-82)

FORD - 352, 360, 390, 406, 427, 428 (1958-76)

CHEV, PONT - 267, 283, 302, 305, 307, 327,

350, 400 (1957-02)

CHEV - 396, 400, 402, 427, 454 (1965-97)

CHEV, PONT - 262, 267, 283, 302, 305, 307,

327, 350, 400 (1957-04)

CHEV, BUIC, OLDS, PONT - 200, 229, 262, 265,

267, 283, 302, 305, 307, 327, 350, 400 (1955-04)

CHEV, BUIC, OLDS, PONT - 200, 229, 262, 265,

267, 283, 302, 305, 307, 327, 350, 400 (1955-04)

CHEV - 396, 400, 402, 427, 454 (1965-97)

CHEV - 396, 400, 402, 427, 454 (1965-97)

FORD - 289, 302, 351 (1963-01)

FORD - 289, 302, 351 (1963-01)

FORD - 429, 460 (1968-97)

FORD - 255, 302, 351 (1968-01)

CHEV, BUIC, CADL, PONT, ISUZ, HUM, SAAB -

294, 323, 325, 346, 350, 364 (1997-14)

CHEV, BUIC, CADL, PONT, ISUZ, HUM, SAAB -

294, 323, 325, 346, 350, 364 (1997-14)

3 PC SET

297

2500 2500

2501 2501

2514 2514

2522 2524

2524 2524

2526 2526

2527 2527

2534 2534

2535 2535

2537 2537

2542 2542

2544 2544

2701 2701

2702 2702

2737 2737

2823 2823

2900 2900

2901 2901

3341 3341

3342 3342

9-3100 40201

9-3103 40202

9-3104 40203

9-3108 40204

9-3110 40205

9-3125 40217

9-3132 40210

9-3137 40212

9-4004 3SR44

9-4005 172

9-4007 3SR94

9-4013 3SR62

9-4023 3SR64

9-4025 3DR54

9-4027 3DR94

9-4032 8MMSR54

9-4034 3DR90

9-4035 8MMSR52

9-4054 3DR54

9-4056 3DR58

9-4057 3DR60

9-4058 3DR62

9-4076 3DR98

9-4131 3DR102

9-4133 3DR106

9-4134 3DR110

9-4136 3DR114

9-4141 3SR98

9-4143 3DR54

9-4145 8MMSR90

9-4147 3DR106D

9-4148 3SR96

9-4149 202

9-4151 3SR60

9-4152 3DR130

9-4159 3SR106D

9-4160 4SR48

9-4161 3SR102

9-4162 8MMSR84

9-4163 3SR102

9-4164 3SR92

9-4166 8MMSR70

9-4167 3SR102

9-4168 8MMSR60

9-4172 3SRH64

9-4173 3SR94

9-4174 190

9-4175 191

9-4176 3DRH48

9-4177 3SRH124

9-4178 4178C

9-4179 4179C

9-4180 3SRH92

9-4185 4SR50

9-4186 8MMSRH126

9-4187 8MMSRH62

9-4189 192

9-4190 8MMSRH72

9-4191 201

9-4194 3SRH60

9-4196 3SRH106

9-4197 8MMSRH82

9-4201 4201F

9-4202 4202F

9-4205 3SRH60

9-4207 4207C

9-4208 4208C

9-4210 3SRH92

9-4214 4214C

9-5001 BT01

298

COMPETITOR INTERCHANGECloyes Part # Melling Part # Cloyes Part # Melling Part #

9-5007 BT07

9-5008 BT08

9-5011 BT11

9-5014 BT63

9-5016 BT16

9-5017 BT17

9-5023 BD23

9-5025 BD25

9-5026 BD26

9-5028 BD28

9-5030 BD30

9-5031 BD31

9-5032 BD32

9-5033 BD33

9-5034 BD34

9-5040 BD40

9-5045 BD45

9-5046 BT46

9-5047 BT47

9-5048 BG48

9-5049 BT49

9-5051 BG51

9-5054 BG127

9-5055 BG55

9-5059 BD59

9-5061 BT61

9-5062 BD34

9-5063 BT63

9-5064 BG64

9-5066 BT66

9-5074 BD74

9-5077 BG77

9-5089 BT89

9-5090 BT93

9-5091 BT91

9-5096 BT96

8-5100 48400

9-5100 BT100

9-5101 BD101

9-5102 BD102

9-5103 BT103

9-5104 BT104

9-5105 BT105

9-5106 BT106

9-5107 BT107

9-5109 BT117

8-5110 48410

9-5114 BT92

9-5115 BT5115

9-5121 BG127

9-5122 BG128

9-5123 BD27

9-5124 BT120

9-5126 BT116

9-5127 BT127

9-5131 BD131

9-5132 BD132

9-5133 BD102

9-5134 BT134

8-5135 48420

8-5145 48450

9-5148 BT148

9-5154 BT140

9-5155 BT141

9-5157 BT157

9-5158 BD44

9-5159 CB200

9-5160 BT160

9-5161 BT161

9-5162 BT162

9-5163 BT113

9-5164 BT164

9-5165 BT117

9-5166 BT166

9-5167 BT167

9-5168 BT168

9-5169 BG169

9-5170 BG170

9-5171 BG171

9-5172 BG172

9-5173 BG173

9-5175 BD58

9-5176 BT176

9-5177 BG177

9-5178 BG179

9-5179 BT179

9-5181 BG181

9-5186 BT143

9-5187 BG187

9-5188 BT188

299


9-5189 CB100

9-5190 CB300

9-5192 BT192

9-5194 BT194

9-5195 BT195

9-5196 BT196

9-5197 BT197

9-5198 BT198

9-5200 BG200

9-5202 BT202

9-5203 BT203

9-5205 BT205

9-5206 BT206

9-5207 BT207

9-5209 BT209

9-5213 BT213

9-5214 BT214

9-5215 BT215

9-5216 BT216

9-5220 BT220

9-5222 BT5222

9-5223 BT5223

9-5225 BT225

9-5227 BT227

9-5229 BT229

9-5230 BT230

9-5234 BG234

9-5235 BT235

9-5236 BT236

9-5239 BG239

9-5240 BG240

9-5243 BT5243

9-5244 BT5244

9-5245 BT245

9-5246 BG246

9-5247 BG247

9-5248 BG248

9-5251 BG5251

9-5254 BG5254

9-5255 BG5255

9-5256 BG5256

9-5257 BG5257

9-5259 BT5259

9-5260 BT260

9-5261 BG261

9-5262 BT5262

9-5263 BT263

9-5268 BT5268

9-5271 BT271

9-5280 BT5280

9-5281 BT5281

9-5292 BT5292

9-5293 BT293

9-5295 BD295

9-5297 BG297

9-5298 BT298

9-5299 BT5299

9-5300 BT5300

9-5301 BT301

9-5302 BT111

9-5304 BG304

9-5305 BG305

9-5306 BG306

9-5307 BG307

9-5308 BT308

9-5309 BG309

9-5310 BG310

9-5311 BD311

9-5312 BD312

9-5313 BT313

9-5314 BT314

9-5315 BG315

9-5316 BG316

9-5317 BD321

9-5318 BD322

9-5319 BG319

9-5320 BG320

9-5323 BT323

9-5324 BT129

9-5325 BT325

9-5326 BT128

9-5327 BT327

9-5328 BG328

9-5329 BG329

9-5330 BG330

9-5331 BG331

9-5332 BG332

9-5336 BD336

9-5337 BG337

9-5338 BT402

300


9-5339 BT403

9-5340 BD322

9-5341 BD321

9-5342 BT342

9-5344 BD344

9-5345 BT345

9-5346 BG180

9-5347 BG233

9-5350 BT350

9-5354 BT326

9-5355 BT355

9-5356 BT356

9-5357 BT357

9-5358 BT358

9-5359 BT359

9-5360 BG360

9-5361 BD361

9-5362 BD362

9-5363 BD363

9-5364 BD364

9-5365 BG365

9-5366 BG366

9-5367 BG367

9-5369 BT402

9-5370 BT403

9-5371 BT402

9-5372 BT403

9-5375 BG5375

9-5381 BG5381

9-5382 BG5382

9-5383 BT5383

9-5384 BG5384

9-5385 BG5385

9-5386 BG5386

9-5387 BT428

9-5388 BD600

9-5390 BT5390

9-5391 BT417

9-5392 BG415

9-5393 BG416

9-5394 BT405

9-5395 BT404

9-5396 BT411

9-5397 BT412

9-5400 BG423A

9-5401 BG424

9-5402 BG425

9-5403 BT426A

9-5404 BT427

9-5409 BT5409

9-5410 BT5410

9-5412 BT5412

9-5413 BG5413

9-5414 BG5414

9-5415 BG5415

9-5416 BG5416

9-5417 BD417

9-5418 BT406

9-5419 BG410

9-5420 BG409

9-5421 BT408A

9-5422 BT507

9-5423 BT418

9-5424 BT419

9-5425 BT420

9-5426 BG422

9-5427 BD421

9-5428 BG333

9-5429 BG334

9-5430 BG413

9-5431 BG414

9-5432 BT430

9-5433 BT429

9-5434 BG5434

9-5435 BG5435

9-5436 BT5436

9-5437 BT5437

9-5438 BG5438

9-5439 BG5439

9-5440 BG5440

9-5441 BT5441

9-5442 BT5442

9-5444 BT5444

9-5450 BT5450

9-5451 BT5451

9-5452 BT5452

9-5453 BT506

9-5454 BT431

9-5455 BT432

9-5456 BT433

301


9-5457 BG434

9-5458 BG435

9-5459 BG391

9-5461 BG392G

9-5462 BD393

9-5463 BD394

9-5464 BG391G

9-5467 5467N

9-5475 BT5406

9-5481 BT5481

9-5486 BT209

9-5489 BT5489

9-5490 BT5490

9-5491 BD417

9-5496 5496B

9-5504 BG5504

9-5506 BG5506

9-5510 BG5510

9-5511 BT5511

9-5512 BT5512

9-5513 BT5513

9-5514 BT5514

9-5515 BG5515

9-5516 BT452

9-5517 BG449

9-5525 BT5525

9-5530 BG5530

9-5531 BG5531

9-5532 BG5532

9-5533 BG5533

9-5534 BG5534

9-5535 BT5535

9-5536 BT5536

9-5537 BT5537

9-5548 BG5548

9-5549 BT5549

9-5550 BT5550

9-5551 BG5551

9-5552 BG5552

9-5553 BG5553

9-5555 BT5555

9-5556 BG5556

9-5557 BT5557

9-5558 BG5558

9-5559 BT5559

9-5560 BT5560

9-5561 BG5561

9-5562 BT5563

9-5563 BT5563

9-5564 BG5564

9-5565 BT5565

9-5566 BT5566

9-5568 BT5568

9-5569 BT5569

9-5570 BG5570

9-5571 BG5571

9-5572 BG5572

9-5573 BT5573

9-5574 BT5574

2516S 2516S

2523S 2525S

2525S 2525S

2528S 2528S

2538S 2538S

2540S 2540S

2542S 2542S

2544S 2544S

2603A 2603A

2750AS 2750AS

2760SA 2760SA

2764S 2764S

2766S 2766S

3335S 3335S

3336S 3336S

3342S 3342S

3508S 3508S

4710S 4710S

8-5100Q 48400Q

9-0185S 3-387SA

9-0185SA 3-387SA

9-0195S 3-195S

9-0195SA 3-195SA

9-0195SB 3-195SB

9-0195SC 3-195SC

9-0383S 3-383SB

9-0385S 3-385SC

9-0387S 3-387SA

9-0387SA 3-387SA

9-0387SAX 3-387SAX

9-0387SB 3-387SHF

302


9-0387SC 3-387SHF

9-0387SD 3-387SGF

9-0387SE 3-387SJF

9-0387SF 3-387SKF

9-0387SG 3-387SIF

9-0387SGX 3-387SGX

9-0387SH 3-387SG

9-0387SHX 3-387SC

9-0387SJ 3-387SG

9-0390S 3-390SA

9-0391S 3-391S

9-0391SB 3-391SC

9-0391SC 3-391SA

9-0391SD 3-391SF

9-0391SE 3-391SE

9-0391SF 3-391SB

9-0391SG 3-391SG

9-0391SH 3-391SD

9-0392S 3-392S

9-0393S 3-393S

9-0393SA 3-393SA

9-0393SB 3-393SD

9-0393SC 3-393SB

9-0393SD 3-393SC

9-0393SX 3-393SX

9-0397S 3-397S

9-0397SA 3-397SB

9-0397SB 3-397SA

9-0397SBX 3-397SBX

9-0397SX 3-397SX

9-0398S 3-398S

9-0398SA 3-398SA

9-0505S 3-505SA

9-0700S 3-700SB

9-0704S 3-704S

9-0705S 3-705S

9-0705SX 3-705SX

9-0708S 3-708S

9-0708SA 3-708SA

9-0711S 3-711S

9-0724S 3-724S

9-0727S 3-727S

9-0752S 3-752S

9-0753S 3-753S

9-0900S 3-900CS

9-0900SA 3-900CSA

9-1100 40400

9-1103 40406

9-1104 40407

9-1108 40410

9-1110 40401

9-1110T 40510

9-1112 40408

9-1113 40409

9-1121 40405

9-1122 40403

9-1125 40217

9-1134 40404

9-1135 40402

9-1138 40402

9-130 163

9-134 168

9-135 160

9-3500TX9 48500T-9

9-3500WX9 48500W-9

9-3510TX9 48510T-9

9-3510WX9 48510W-9

9-3522X9 48530T-9

9-3535X9 48520T-9

9-3658TX9 48560T-9

9-4007S 3SR94-1

9-4007SA 3SR94-2

9-4023S 3-3SR64S

9-4054S 3DR54-1

9-4057S 3DR60-1

9-4058S 3DR62-1

9-4076S 3DR98-1

9-4131S 3DR102-1

9-4131SA 3DR102-2

9-4133SA 3DR106-3

9-4134S 3DR110-1

9-4134SA 3DR110-2

9-4134SB 3DR110-3

9-4136S 3DR114-1

9-4141S 3SR98-1

9-4145S 8MMSR90-1

9-4145SA 3-102S

9-4147S 3DR106D-1

9-4148S 3SR96-1

9-4148SHD 3SR96-1HD

303


9-4151S 3-3SR60AS

9-4163S 3SR102-1

9-4164S 3SR92-1

9-4164SA 3-3SR92

9-4167S 3-4167S

9-4172S 3-3SRH64S

9-4172SA 3-3SRH64AS

9-4174S 3-191S

9-4177S 3-3SRH124S

9-4180S 3-3DRH48

9-4180SA 3-4210SA

9-4186S 3-8MMSRH62SA

9-4186SX 3-8MMSRH62S

9-4188S BSEK122

9-4189S 3-192S

9-4196S 3-3SRH106

9-4200SA 3-4200SA

9-4201S 3-4201S

9-4201SX 3-4201SX

9-4202S 3-4202S

9-4207S 3-4207S

9-4207SX 3-4207SX

9-4212S 3-4212S

9-4214SA 3-4214SA

9-5133HD BD102HD

B012 B-012

B013 B-013

B014 B-014

B017 B-017

B018 B-018

B020 B-020

B032 B-032

B036 B-036

B037 B-037

B041 B-041

B043 B-043

B061 B-061

B067 B-067

B070 B-070

B071 B-071

B073 B-073

B074 B-074

B076 B-076

B077 B-077

B081 B-081

B087 B-087

B088 B-088

B089 B-089

B090 B-090

B091 B-091

B092 B-092

B093 B-093

B094 B-094

B095 B-095

B099 B-099

B100 B-0100

B101 B-0101

B104 B-0104

B111 B-0111

B112 B-0112

B113 B-0113

B114 B-0114

B117 B-0117

B118 B-0118

B122 B-0122

B123 B-0123

B124 B-0124

B125 B-0125

B126 B-0126

B127 B-0127

B128 B-0128

B129 B-0129

B130 B-0130

B131 B-0131

B132 B-0132

B134 B-0134

B135 B-0135

B136 B-0136

B137 B-0137

B139 B-0139

B140 B-0140

B141 B-0141

B142 B-0142

B143 B-0143

B145 B-0145

B146 B-0146

B147 B-0147

B148 B-0148

B150 B-0150

B151 B-0151

304


B153 B-0153

B154 B-0154

B157 B-0157

B158 B-0158

B160 B-0160

B161 B-0161

B162 B-0162

B163 B-0163

B164 B-0164

B165 B-0165

B166 B-0166

B167 B-0167

B168 B-0168

B170 B-0170

B171 B-0171

B172 B-0172

B173 B-0173

B174 B-0174

B176 B-0176

B177 B-0177

B178 B-0178

B179 B-0179

B180 B-0180

B181 B-0181

B182 B-0182

B183 B-0183

B184 B-0184

B185 B-0185

B186 B-0186

B187 B-0187

B190 B-0190

B191 B-0191

B192 B-0192

B193 B-0193

B194 B-0194

B195 B-0195

B198 B-0198

B199 B-0199

B200 B-0200

B201 B-0201

B203 B-0203

B204 B-0204

B206 B-0206

B208 B-0208

B210 B-0210

B212 B-0212

B214 B-0214

B215 B-0215

B216 B-0216

B217 B-0217

B219 B-0219

B220 B-0220

B221 B-0221

B223 B-0223

B224 B-0224

B226 B-0226

B227 B-0227

B228 B-0228

B229 B-0229

B230 B-0230

B232 B-0232

B233 B-0233

B234 B-0234

B235 B-0235

B236 B-0236

B237 B-0237

B239 B-0239

B240 B-0240

B241 B-0241

B244 B-0244

B245 B-0245

B246 B-0246

B247 B-0247

B248 B-0248

B249 B-0249

B251 B-0251

B252 B-0252

B253 B-0253

B254 B-0254

B255 B-0255

B256 B-0256

B257 B-0257

B258 B-0258

B259 B-0259

B262 B-0262

B263 B-0263

B265 B-0265

B266 B-0266

B271 B-0271

B272 B-0272

305


B273 B-0273

B276 B-0276

B277 B-0277

B279 B-0279

B280 B-0280

B281 B-0281

B282 B-0282

B283 B-0283

B285 B-0285

B286 B-0286

B287 B-0287

B288 B-0288

B289 B-0289

B294 B-0294

B295 B-0295

B296 B-0296

B297 B-0297

B298 B-0298

B299 B-0299

B300 B-0300

B301 B-0301

B302 B-0302

B303 B-0303

B304 B-0304

B305 B-0305

B306 B-0306

B307 B-307

B308 B-0308

B309 B-0309

B311 B-0311

B312 B-0312

B313 B-0313

B314 B-0314

B315 B-0315

B318 B-0318

B320 B-0320

B323 B-0323

B329 B-0329

B330 B-0330

B331 B-0331

B332 B-0332

B333 B-0333

B334 B-0334

C160 160

C161 161

C162 162

C163 163

C166 166

C168 168

C169 169

C172 172

C180 180

C181 181

C185 185

C189 189

C193A 193

C194 194

C195 195

C300 300

C-3001K 3-499S

C-3002K 3-361S

C-3003K 3-359S

C-3004K 3-358SA

C-3005K 3-494SB

C-3006K 3-498SC

C-3007K 3-350S

C-3008K 3-349S

C-3009K 3-498SB

C-3010K 3-501SA

C-3011K 3-501S

C-3012K 3-494SA

C-3013K 3-491S

C-3014K 3-358S

C-3015 3-366S

C-3017 3-506SE

C-3018K 3-359SB

C-3019 3-395S

C-3021K 3-494SC

C-3022K 3-495S

C-3023K 3-163S

C-3023X 40201

C-3023XSP 40201

C-3024K 3-171S

C-3024X 40205

C-3025 3-489S

C-3026K 3-351S

C-3027K 3-365S

C-3028 3-160S

C-3028X 40202

C-3029 3-169S

306


C-3029X 40204

C-3030 3-169SA

C-3031 3-344S

C-3032 3-356S

C-3034K 3-498S

C-3035 3-494S

C-3036 3-385S

C-3037 3-491SA

C-3038 3-382S

C-3039 3-509SA

C-3041 3-385SA

C-3043 3-350S

C-3044 3-168SA

C-3045 3-168S

C-3046 3-374SA

C-3047K 3-370S

C-3048K 3-372S

C-3049K 3-503S

C-3051K 3-365SA

C-3052 3-505S

C-3053 3-494S

C-3054X 40206

C-3055 3-202S

C-3056K 3-506SB

C-3057K 3-163SB

C-3058K 3-359SC

C-3059K 3-499SA

C-3061 3-374S

C-3062 3-3SR64

C-3064K 3-506SC

C-3065 3-163SA

C-3066 3-378S

C-3067K 3-373S

C-3068 3-168SC

C-3069 3-377S

C-3070 3-375S

C-3071 3-375SA

C-3072 3-380S

C-3073 3-378SA

C-3074 3-181S

C-3075 3-3SR60

C-3076 3-3DR130

C-3077 3-388S

C-3078 3-3SRH64

C-3079 3-168SD

C-3082 3-494SD

C-3083 3-498SA

C-3085 3-4SR48

C-3086K 3-376S

C-3087 3-503SB

C-3088 3-383S

C-3089 3-384S

C-3090 3-509S

C-3092 3-202SA

C-3097 3-181SA

C-3098 3-3SRH64A

C-3201 3-4SR50

C-3202K 3-507S

C-3204 3-390S

C-3205 3-377SA

C-3206 3-700SA

C-3207 3-168SE

C-3208 3-3SR92A

C-3209 3-192SA

C-3210 3-3SRH60SA

C-3212 3-8MMSRH72S

C-3213 3-4SR50SA

C-3214 3-381AS

C-3215 3-381ASB

C-3216 3-4SR50SE

C-3217 3-4SR50SB

C-3218 3-396S

C-3219 3-4SR50SC

C-3220 3-3SRH60SA

C-3221 3-700S

C-3222 3-4SR50SD

C-3225 3-385SB

C-3227 3-3SRH60S

C-3228 3-509SB

C-3233 3-8MMSRH72SA

C-3235 3-3235S

C344 344

C348 348

C349 349

C350 350

C351 351

C356 356

C358 358

C359 359

C361 361

307


C365 365

C366 366

C370 370

C373 373

C374 374

C375 375

C376 376

C377 377

C378 378

C380 380

C381 375

C381A 381A

C382 382

C383 383M

C384 384

C385 385

C387 387

C388 388

C390 390

C391 391

C392 392

C393 393

C394 394

C396 396

C397 397

C489 505

C493 491

C494 494

C495 495

C498 498

C499 499

C501 501

C503 503

C504 494

C505 505

C507 507

C700 700

C704 704

C705F 705

C706F 706F

C708F 708

C711F 711F

C712F 712F

C719F 719

C721F 721

C727F 727F

C728F 728F

C753 753

C754 754

C900 900C

C901 901C

P9115 MPC-393

S246 S246

S249 S249

S250 S250

S255 S255

S256 S256

S261T S261

S262 S262

S270 S270

S273 S273

S274 S274

S276 S276

S278 S278

S281 S281

S283 S283

S284 S284

S288 S288

S289 S289

S291 S291

S297 S297

S299 S299

S308 S308

S311 S311

S321 S321

S323 S323

S326 S326

S327 S327

S331 S331

S334T S334

S339 S339

S348T S348

S349 S349

S353 S353

S355 S355

S358T S358

S359 S359

S360T S360

S361 S361

S363 S363

308


S365 S365

S366T S366

S367 S367

S369 S369

S370T S370

S375 S375

S377 S377

S380 S380

S388T S388

S390T S390

S391 S391

S392T S392

S393 S393

S394 S394

S395 S395

S396T S396

S397 S397

S398T S398

S400 S400

S401 S401

S402 S402

S404T S404

S405 S405

S406T S406

S407 S407

S410 S410

S412T S412

S417 S417

S419 S419

S420T S420

S423 S423

S430T S430

S431 S431

S438 S438

S445 S445

S446 S446

S447 S447

S448T S448

S449 S449

S450 S450

S451 S451

S453 S453

S455 S455

S456 S456

S459 S459

S461 S461

S462 S462

S463 S463

S468 S468

S471 S471

S475 S475

S479 S479

S491 S491

S493 S493

S494 S494

S495 S495

S500 S500

S501 S501

S502T S502

S505 S505

S506T S506

S508 S508

S511 S511

S512T S512

S515 S515

S523 S523

S524 S524

S527 S527

S531 S531

S533 S533

S539 S539

S542T S542

S543 S543

S545 S545

S546T S546

S549 S549

S551 S551

S557 S557

S558T S558

S559 S559

S560 S560

S567 S567

S577 S577

S581 S581

S591 S591

S593 S593

S598 S598

S600 S600

S607 S607

S608T S608

309


S609 S609

S610T S610

S611 S611

S612 S612

S616 S616

S617 S617

S618T S618

S619 S619

S620T S620

S621 S621

S622 S622

S626 S626

S631 S631

S633 S633

S634T S634

S636T S636

S638 S638

S640 S640

S641 S641

S642 S642

S645 S645

S649 S649

S650 S650

S651 S651

S653 S653

S658 S658

S670 S670

S675 S675

S684T S684

S685 S685

S686 S686

S688T S688

S689 S689

S690T S690

S691 S691

S692T S692

S693 S693

S694 S694

S695 S695

S698 S698

S699 S699

S700T S700

S701 S701

S706T S706

S710 S710

S712T S712

S713 S713

S715 S715

S716T S716

S717 S717

S718T S718

S719 S719

S720 S720

S721 S721

S724 S724

S726T S726

S729 S729

S731 S731

S732T S732

S734T S734

S736T S736

S737 S737

S740T S740

S742T S742

S747 S747

S749 S749

S751 S751

S754 S754

S756T S756

S758T S758

S760T S760

S762T S762

S764T S764

S766T S766

S768T S768

S770T S770

S771 S771

S772T S772

S773 S773

S774T S774

S776T S776

S778 S778

S780T S780

S784T S784

S786T S786

S788T S788

S790 S790

S790A S790P

S791 S791

S795 S795

310


S797 S797

S804T S804T

S805 S805

S806T S806

S807 S807

S808T S808

S809 S809

S810T S810

S811 S811

S812T S812

S814T S814

S815 S815

S817 S817

S818T S818

S819 S819

S821 S821

S822T S822

S824 S824

S826T S826

S827 S827

S830T S830

S831 S831

S832 S832

S833 S833

S834T S834

S835 S835

S836T S836

S837 S837

S839 S839

S840 S840

S842T S842

S843 S843

S846 S846

S847 S847

S848T S848

S849 S849

S850T S850

S851 S851

S852 S852

S853 S853

S854 S854

S856T S856

S859 S859

S860 S860

S861 S861

S862 S862

S863 S863

S865 S865

S868 S868

S869 S869

S870 S870

S878T S878

S884 S884

S885 S885

S886 S886

S888 S888

S889 S889

S891 S891

S892T S892

S893 S893

S894T S894

S896T S896

S898T S898

S908 S908A

S911 S911

S913 S913

S921 S921

S926 S926

S927 S927

S928T S928

S929 S929

S930 S930

S931 S931

S932 S932

S933 S933

S934T S934

S937 S937

S939 S939

S940 S940

311


S.A. Gear Part # Melling Part #

2500 2500

2501 2501

2514 2514

2524 2524

2527 2527

2534 2534

2535 2535

2537 2537

2542 2542

2701 2701

2702 2702

2900 2900

2901 2901

3321 3321

3334 3334

3341 3341

3342 3342

4706 4706

7022 BD22

7023 BD23

7025 BD25

7026 BD26

7030 BD30

7031 BD31

7034 BD34

7040 BD40

7043 BD43

7045 BD45

7048 BG48

7049 BT49

7050 BG95

7051 BG51

7054 BG127

7055 BG55

7059 BD59

7062 BD34

7064 BG64

7071 BD71

7077 BG77

7080 BG80

7081 BD81

7083 BD83

7085 BG85

7087 BG87

7088 BG88

7101 BD101

7102 BD102

7121 BG127

7122 BG128

7123 BD27

7132 BD132

7133 BD102

7158 BD44

7159 CB200

7169 BG169

7170 BG170

7171 BG171

7172 BG172

7173 BG173

7175 BD58

7181 BG181

7186 BT143

7187 BG187

7189 CB100

7190 CB300

7200 BG200

7201 BG5435

7205 BT205

7206 BT206

7207 BT207

7209 BT209

7214 BT214

7215 BT215

7216 BT216

7222 BT5222

7223 BT5223

7227 BT227

7231 BG231

7232 BG232

7233 BG233

7234 BG234

7237 BG237

7238 BG238

7239 BG239

7240 BG240

7243 BT5243

7244 BT5244

7246 BG246

7248 BG248

7251 BG5251

7254 BG5254

7255 BG5255

7256 BG5256

7257 BG5257

7259 BT5259

7261 BG261

7275 AP275

7281 BT5281

7283 BT5283

312

COMPETITOR INTERCHANGES.A. Gear Part # Melling Part #S.A. Gear Part # Melling Part #

7295 BD295

7297 BG297

7300 BT5300

7302 BT111

7304 BG304

7305 BG305

7306 BG306

7307 BG307

7309 BG309

7310 BG310

7311 BD311

7312 BD312

7315 BG315

7316 BG316

7319 BG319

7320 BG320

7321 BD321

7322 BD322

7328 BG328

7329 BG329

7330 BG330

7331 BG331

7332 BG332

7336 BD336

7337 BG337

7344 BD344

7346 BG180

7360 BG360

7361 BD361

7362 BD362

7363 BD363

7364 BD364

7365 BG365

7366 BG366

7367 BG367

7368 BG368

7375 BG5375

7381 BG5381

7382 BG5382

7384 BG5384

7385 BG5385

7386 BG5386

7387 BG333

7388 BG334

7391 BG391

7393 BD393

7394 BD394

7409 BG409

7410 BG410

7411 BG5551

7412 BG5552

7413 BG413

7414 BG414

7415 BG415

7416 BG416

7422 BG422

7423 BG423A

7424 BG424

7425 BG425

7434 BG434

7435 BG435

7438 BG5438

7439 BG5439

7440 BG5440

7449 BG449

7451 BG5515

7504 BG5504

7506 BG5506

7508 BG6006

7518 BG5570

7613 BG5413

7614 BG5414

7615 BG5415

7616 BG5416

7634 BG5434

7635 BG391G

7636 BG392G

7688 BD600

9001 BT01

9007 BT07

9008 BT08

9010 BT10

9014 BT63

9016 BT16

9017 BT17

9018 BT18

9019 BT21

9021 BT21

9032 BD32

9033 BD33


313

9038 BD38

9046 BT46

9061 BT61

9063 BT63

9066 BT66

9075 BT75

9076 BT76

9089 BT89

9090 BT93

9091 BT91

9096 BT96

9100 BT100

9103 BT103

9104 BT104

9105 BT105

9106 BT106

9109 BT117

9114 BT92

9115 BT5115

9118 BT124

9124 BT120

9126 BT116

9127 BT127

9134 BT134

9148 BT148

9154 BT140

9155 BT141

9157 BT157

9160 BT160

9161 BT161

9162 BT162

9163 BT113

9164 BT164

9165 BT117

9166 BT166

9167 BT167

9168 BT168

9176 BT176

9179 BT179

9182 BT139

9188 BT188

9191 BT94

9192 BT192

9194 BT194

9195 BT195

9196 BT196

9197 BT197

9198 BT198

9199 BT199

9202 BT202

9203 BT203

9213 BT213

9220 BT220

9225 BT225

9229 BT229

9230 BT230

9235 BT235

9236 BT236

9245 BT245

9247 BG247

9260 BT260

9262 BT5262

9263 BT263

9268 BT5268

9271 BT271

9280 BT5280

9292 BT5292

9293 BT293

9298 BT298

9299 BT5299

9301 BT301

9308 BT308

9313 BT313

9314 BT314

9321 BD321

9322 BD322

9323 BT323

9324 BT324

9325 BT325

9326 BT128

9327 BT327

9338 BT402

9339 BT403

9340 BD322

9341 BD321

9342 BT342

9345 BT345

9350 BT350

9354 BT326

9355 BT355


314

9356 BT356

9357 BT357

9358 BT358

9359 BT359

9371 BT402

9372 BT403

9374 BT5481

9383 BT5383

9404 BT404

9405 BT405

9406 BT406

9408 BT408A

9410 BT5410

9411 BT411

9412 BT412

9413 BT5550

9414 BT5549

9417 BT417

9418 BT418

9419 BT419

9420 BT420

9422 BT507

9426 BT426A

9427 BT427

9428 BT428

9431 BT431

9432 BT432

9433 BT433

9436 BT5436

9437 BT5437

9441 BT5441

9442 BT5442

9444 BT5444

9448 BT5448

9450 BT5450

9453 BT506

9454 BT5514

9467 5467N

9475 BT5406

9489 BT6003

9496 5496B

9509 BT5489

9510 BG5510

9511 BT5511

9512 BT5512

9517 BT5569

9532 BT430

9533 BT429

9550 BT5513

9552 BT5452

9612 BT5412

9617 BD417

9627 BD421

9636 BT5121

71003 BT5566

71004 BG5564

71011 BD6005

71012 BT5555

71028 BG6007

71029 BG5530

71030 BG5532

71031 BG5531

71037 BG5572

71040 BG5556

71041 BG5548

71045 BG6004

71046 BG6003

71050 BG5571

71051 BG5553

73001 3-499S

73002 3-361S

73003 3-359S

73004 3-358SA

73005 3-494SB

73006 3-498SC

73007 3-350S

73008 3-349S

73009 3-498SB

73010 3-501SA

73011 3-501S

73012 3-494SA

73013 3-491S

73014 3-358S

73015 3-366S

73017 3-163S

73018 3-351S

73019 3-359SB

73020 3-489S

73021 3-494SC

73022 3-495S


315

73024 3-160S

73026 3-168SC

73027 3-168SA

73028 3-169SA

73029 3-169S

73033 3-374SA

73034 3-498S

73035 3-494S

73036 3-171S

73037 3-491SA

73038 3-344S

73039 3-356S

73041 3-365S

73043 3-163SA

73044 3-365SA

73045 3-498SA

73046 3-499SA

73047 3-370S

73048 3-505S

73053 3-3SR64

73054 3-163SB

73055 3-494SD

73059 3-499S

73060 3-503S

73061 3-372S

73062 3-168S

73063 3-359SC

73064 3-499SA

73066 3-374S

73067 3-3SR60

73068 3-3DR130

73069 3-202S

73070 3-506SB

73071 3-376S

73072 3-507S

73075 3-373S

73076 3-377S

73077 3-378S

73078 3-503SB

73079 3-4SR48

73081 3-202SA

73082 3-181S

73084 3-168SD

73085 3-375S

73087 3-3SRH64

73088 3-375SA

73089 3-380S

73090 3-378SA

73093 3-506SC

73097 3-383S

73098 3-377SA

73099 3-4SR50

73112 3-509S

73113 3-384S

73114 3-181SA

73115 3-3SRH64A

73116 3-385S

73117 3-388S

73118 3-168SE

73120 3-700SA

73121 3-3SR92A

73123 3-506SE

73124 3-370SA

73125 3-506SD

73126 3-509SB

73127 3-381AS

73128 3-509SA

73129 3-390S

73131 3-381ASB

73133 3-3SRH60SA

73134 3-700S

73135 3-8MMSRH72S

73136 3-4SR50SE

73137 3-4SR50SA

73138 3-396S

73139 3-382S

73158 3-4SR50SB

73159 3-4SR50SC

73160 3-192SA

73162 3-3SRH60SA

73163 3-4SR50SD

73164 3-3SRH60S

73175 3-499S

73178 3-3235S

73184 3-8MMSRH72SA

76001 3DR102-1

76003 3DR60-1

76005 3DR98-1

76006 3DR62-1

76007 3SR94-1


316

76008 3DR110-1

76009 3DR114-1

76010 3DR110-2

76011 3DR110-3

76012 3DR54-1

76024 3-102S

76026 3SR98-1

76027 3SR96-1

76031 3DR106D-1

76032 3DR102-2

76033 8MMSR90-1

76036 3SR92-1

76037 3SR102-1

76043 3SR94-2

76046 BSEK122

76051 3-3DRH48

76052 3-3SRH124S

76054 3DR106-2

76055 3-3SR60AS

76056 3-3SRH64S

76057 3-387SA

76058 3-387SA

76068 3-3SRH64AS

76069 3-505SA

76070 3-3SR64S

76071 3-192S

76072 3-3SR92

76073 3-387SA

76074 3-383SB

76078 3-391S

76079 3-391SB

76083 3-393S

76085 3-3SRH106

76087 3-392S

76089 3-387SA

76090 3-390SA

76093 3-4202S

76100 3-391SA

76101 3-393SA

76103 3-395S

76105 3-387SG

76106 3-393SD

76107 3-3DRH48

76108 3-8MMSRH62SA

76110 3-393SC

76112 3-391SC

76114 3-387SIF

76115 3-391SG

76116 3-380S

76118 3-391SF

76119 3-391SE

76123 3-387SG

76129 3-387SHF

76130 3-387SGF

76131 3-387SJF

76132 3-387SKF

76135 3-398S

76137 3-398SA

76138 3-4207S

76139 3-385SB

76140 3-704S

76141 3-397SA

76143 3-4167S

76144 3-393SB

76146 3-387SHF

76147 3-387SHF

76148 3-387SGF

76149 3-387SJF

76150 3-387SKF

76153 3-4212S

76154 3-4210SA

76155 3-705S

76156 3-705S

76158 3-0250S

76159 3-1007S

76168 3-387SGX

76169 3-387SIF

76171 3-724S

76172 3-708S

76180 3-4214SA

76184 3-4214SA

76186 3-752S

76190 3-195SB

76191 3-195S

76192 3-385SC

76193 3-700SB

76195 3-4200SA

76210 3-753S

76218 3-0470S

76219 3-0719S


317

76221 3-727S

76224 3-385SA

76225 3-391S

76235 3-708SA

76236 3-4212SA

78100 40400

78103 40406

78104 40407

78108 40410

78110 40401

78111 40402

78112 40408

78113 40409

78120 40402

78121 40405

78125 40407

78129 40404

78130 40403

78151 40402

78204 40203

78208 40204

78210 40205

78212 40212

78225 40217

78300 40500

78337 40510

78400 48400

78410 48410

78420 48420

78430 48430

78450 48450

91001 BT5565

91022 BT6001

91023 BT6002

91024 BT6000

91028 BG5533

91029 BG5534

91030 BT5537

91031 BT5536

91032 BT5535

91040 BT5574

91043 BT5573

91049 BT5490

2516S 2516S

2525S 2525S

2528S 2528S

2538S 2538S

2540S 2540S

2542S 2542S

2544S 2544S

2727S 2727S

2750AS 2750AS

2760SA 2760SA

2764S 2764S

2766S 2766S

2SR-60 201

3329A 3329A

3336S 3336S

3342S 3342S

3DR-102 3DR102

3DR-106 3DR106

3DR-110 3DR110

3DR-112D 3DR112D

3DR-114 3DR114

3DR-114A 3DR114

3DR-130 3DR130

3DR-54 3DR54

3DR-54A 3DR-54

3DR-54B 3DR54

3DR-58 3DR58

3DR-60 3DR60

3DR-62 3DR62

3DR-84 3DR84

3DR-90 3DR90

3DR-94 3DR94

3DR-98 3DR98

3SR-102 3SR102

3SR-44 3SR44

3SR-58 3SR58

3SR-60 3SR60

3SR-62 3SR62

3SR-64 3SR64

3SR-94 3SR94

3SR-96 3SR96

3SR-98 3SR98

3SRH-138T 4207C

3SRH-44T 4208C

3SRH-60 3SRH60

4710S 4710S

4SR-48 4SR48


318

4SR-50 4SR50

7133S BD102HD

73004-3 40206

73004N 3-358SAN

73014-3 40206

73014-3C 40206

73017-3 40201

73017-3C 40201

73017-3S 40201

73017-3SC 40201

73024-3 40202

73024-3C 40202

73036-3 40205

73063N 3-359SCN

7387B BG333

76027S 3SR96-1HD

76053A 3-191S

76081A 3-397S

76081AS 3-397SX

76082A 3-397SB

76082AS 3-397SX

76083S 3-393SX

76086S 3-387SC

76089S 3-387SAX

76105S 3-387SC

76108S 3-8MMSRH62S

76114S 3-387SGX

76138S 3-4207SX

76141S 3-397SBX

76155S 3-705SX

78100C 40400

78103C 40406

78104C 40407

78108C 40410

78110C 40401

78112C 40408

78113C 40409

78120C 40402

78121C 40405

78129C 40404

78130C 40403

78204C 40203

78208C 40204

78210C 40205

78225C 40217

78300C 40500

78337C 40510

78400Q 48400Q

78410Q 48410Q

78500T-9 48500T-9

78500W-9 48500W-9

78510T-9 48510T-9

78510W-9 48510W-9

78520T-9 48520T-9

78520W-9 48520W-9

78530T-9 48530T-9

78533T-9 48561T-9

78551T-9 48551T-9

8MMSR54 8MMSR54

8MMSR60 8MMSR60

8MMSR70 8MMSR70

8MMSR84 8MMSR84

8MMSR90 8MMSR90

8MMSRH82 8MMSRH82

9452C BT452

C1000 727F

C1001 3DRH48

C1007 1007

C1009 754

C1010 753

C1015 719

C-160 160

C-161 161

C-162 162

C-163 163

C-166 166

C-168 168

C-169 169

C-172 172

C-181 181

C-185 185

C-189 189

C-193 193

C-194 194

C-195 195

C-202 202

C-3000 300

C-339 339

C-348 348

C-349 349


319

C-350 350

C-351 351

C-354 344

C-356 356

C-357 357

C-358 358

C-359 359

C-361 361

C-365 365

C-366 366

C-369 374

C-370 395

C-372 385

C-373 373

C-374 374

C-375 375

C-376 376

C-377 377

C-378 378

C-380 380

C-381 375

C-381A 381A

C-382 382

C-383 383

C-384 384

C-385 385

C-387 387

C-387F 387

C-388 388

C-390 390

C-391 391

C-392 392

C-393 393

C-394 394

C-395 395

C-396 396

C-397F 397

C-491 491

C-494 494

C-495 495

C-498 498

C-499 499

C-501 501

C-503 503

C-505 505

C-506 499

C-507 507

C-509 499

C-700 700

C-704F 704

C-705F 705

C-706F 706F

C-708F 708

C-711F 711F

C-712F 712F

C-727F 727F

C-728F 728F

RC-1005 3SR94

RC-1006 190

RC-1007 191

RC-1008 3DRH48

RC-1009 3SRH124

RC-1010 4178C

RC-1011 4179C

RC-1012 3SRH92

RC-1019 8MMSRH126

RC-1020 8MMSRH62

RC-1021 192

RC-1022 3SR92

RC-1023 3SRH106

RC-1025 8MMSRH72

RC-1029 4201F

RC-1030 4202F

RC-1035 4214C

RC-1043 721

RC-1044 1044

S1203 S927

S1204 S934

S1221 S1221

S1223 S921

S1225 S1225

S1227 S1227

S1229 S1229

S1232 S1232

S1237 S937

S1240 S930

S1242 S932

S1248 S940

S-127 S127

S-246 S246


320

S-249 S249

S-250 S250

S-255 S255

S-256 S256

S-261T S261

S-262 S262

S-264 S264

S-265 S265

S-266 S266

S-270 S270

S-273 S273

S-274 S274

S-276 S276

S-281 S281

S-283 S283

S-284 S284

S-288 S288

S-289 S289

S-291 S291

S-297 S297

S-299 S299

S-308 S308

S-311 S311

S-321 S321

S-323 S323

S-326 S326

S-327 S327

S-328 S328

S-331 S331

S-332T S332

S-334T S334

S-339 S339

S-340 S340

S-344T S344

S-348T S348

S-349 S349

S-353 S353

S-355 S355

S-358T S358

S-359 S359

S-360T S360

S-361 S361

S-365 S365

S-366T S366

S-367 S367

S-369 S369

S-370T S370

S-375 S375

S-377 S377

S-380 S380

S-388T S388

S-390N S390

S-390T S390

S-391 S391

S-392T S392

S-393 S393

S-394 S394

S-395 S395

S-396T S396

S-397 S397

S-398T S398

S-400 S400

S-401 S401

S-402 S402

S-403 S403

S-404T S404

S-405 S405

S-406T S406

S-407 S407

S-410 S410

S-417 S417

S-419 S419

S-420T S420

S-423 S423

S-424 S-424

S-430T S430

S-431 S431

S-436N S436N

S-438 S438

S-445 S445

S-446 S446

S-447 S447

S-448T S448

S-450 S450

S-453 S453

S-455 S455

S-456 S456

S-457 S457

S-459 S459

S-461 S461


321

S-462 S462

S-463 S463

S-468 S468

S-471MX S471

S-475 S475

S-479 S479

S-490 S490

S-491 S491

S-493 S493

S-500 S500

S-501 S501

S-502 S502

S-505 S505

S-506 S506

S-507 S507

S-508 S508

S-511 S511

S-512 S512

S-515 S515

S-521 S521

S-524 S524

S-527 S527

S-531 S531

S-533 S533

S-539 S539

S-540 S540

S-542 S542

S-543 S543

S-545 S545

S-546T S546

S-549 S549

S-551 S551

S-557 S557

S-558 S558

S-559 S559

S-560 S560

S-567 S567

S-572 S572

S-577 S577

S-581 S581

S-591 S591

S-593 S593

S-598 S598

S-600 S600

S-607 S607

S-608 S608

S-609 S609

S-610N S610

S-610T S610

S-611 S611

S-612 S612

S-616 S616

S-617 S617

S-618 S618

S-619 S619

S-620 S620

S-621 S621

S-622 S622

S-626 S626

S-631 S631

S-633 S633

S-634 S634

S-636 S636

S-638 S638

S-640 S640

S-641 S641

S-642 S642

S-645 S645

S-649 S649

S-650 S650

S-651 S651

S-653 S653

S-658 S658

S-669 S669

S-670 S670

S-674 S674

S-675 S675

S-677 S677

S-685 S685

S-686 S686

S-688 S688

S-689 S689

S-690 S690

S-691 S691

S-692 S692

S-693 S693

S-694 S694

S-695 S695

S-696 S696

S-698 S698


322

S-700 S700

S-701 S701

S-703 S703

S-706 S706

S-709 S709

S-710 S710

S-712 S712

S-713 S713

S-714 S714

S-715 S715

S-716 S716

S-717 S717

S-718 S718

S-719 S719

S-720 S720

S-721 S721

S-724 S724

S-726 S726

S-729 S729

S-731 S731

S-732T S732

S-734 S734

S-735 S699

S-736 S736

S-737 S737

S-740 S740

S-742 S742

S-747 S747

S-749 S749

S-751 S751

S-754 S754

S-756 S756

S-758 S758

S-760 S760

S-762 S762

S-764 S764

S-766 S766

S-768 S768

S-770 S770

S-771 S771

S-772 S772

S-773 S773

S-774 S774

S-776 S776

S-778 S778

S-780 S780

S-784 S784

S-786 S786

S-788 S788

S-790 S790

S-790P S790P

S-791 S791

S-795 S795

S-797 S797

S-802S S802SP

S-803S S803SP

S-804 S804T

S-805 S805

S-806 S806

S-807 S807

S-808 S808

S-809 S809

S-810 S810

S-811 S811

S-812 S812

S-813 S813

S-814 S814

S-815 S815

S-816 S816

S-817 S817

S-818 S818

S-819 S819

S-821 S821

S-822 S822

S-824 S824

S-827 S827

S-830 S830

S-831 S831

S-832 S832

S-833 S833

S-834 S834

S-835 S835

S-836 S836

S-837 S837

S-839 S839

S-840 S840

S-841 S841

S-842 S842

S-843 S843

S-846 S846

323


S-847 S847

S-848 S848

S-849 S849

S-850 S850

S-851 S851

S-852 S852

S-853 S853

S-854 S854

S-855 S855

S-856 S856

S-859 S859

S-860 S860

S-861 S861

S-862 S862

S-863 S863

S-865 S865

S-868 S868

S-869 S869

S-870 S870

S-878 S878

S-883 S929

S-884 S884

S-885 S885

S-886 S886

S-888 S888

S-889 S889

S-891 S891

S-892 S892

S-893 S893

S-894 S894

S-896T S896

S-898T S898

S-908 S-908A

S-913 S-913

S-918T S939

S-928T S928

TB-012 B-012

TB-013 B-013

TB-014 B-014

TB-017 B-017

TB-032 B-032

TB-036 B-036

TB-037 B-037

TB-041 B-041

TB-043 B-043

TB-061 B-061

TB-067 B-067

TB-070 B-070

TB-071 B-071

TB-073 B-073

TB-074 B-074

TB-077 B-077

TB-078 B-078

TB-081 B-081

TB-086 B-086

TB-087 B-087

TB-089 B-089

TB-090 B-090

TB-091 B-091

TB-092 B-092

TB-093 B-093

TB-094 B-094

TB-095 B-095

TB-100 B-0100

TB-101 B-0101

TB-103 B-0103

TB-104 B-0104

TB-106 B-0106

TB-111 B-0111

TB-112 B-0112

TB-113 B-0113

TB-114 B-0114

TB-117 B-0117

TB-118 B-0118

TB-121 B-0121

TB-122 B-0122

TB-123 B-0123

TB-124 B-0124

TB-125 B-0125

TB-126 B-0126

TB-127 B-0127

TB-128 B-0128

TB-129 B-0129

TB-131 B-0131

TB-132 B-0132

TB-133 B-0133

TB-134 B-0134

TB-135 B-0135

TB-136 B-0136

TB-137 B-0137


324

TB-139 B-0139

TB-141 B-0141

TB-142 B-0142

TB-143 B-0143

TB-144 B-0144

TB-145 B-0145

TB-146 B-0146

TB-147 B-0147

TB-150 B-0150

TB-151 B-0151

TB-153 B-0153

TB-154 B-0154

TB-155 B-0155

TB-157 B-0157

TB-158 B-0158

TB-160 B-0160

TB-161 B-0161

TB-162 B-0162

TB-164 B-0164

TB-165 B-0165

TB-166 B-0166

TB-167 B-0167

TB-168 B-0168

TB-169 B-0169

TB-170 B-0170

TB-171 B-0171

TB-172 B-0172

TB-174 B-0174

TB-176 B-0176

TB-177 B-0177

TB-179 B-0179

TB-180 B-0180

TB-181 B-0181

TB-182 B-0182

TB-183 B-0183

TB-185 B-0185

TB-186 B-0186

TB-187 B-0187

TB-190 B-0190

TB-191 B-0191

TB-192 B-0192

TB-193 B-0193

TB-194 B-0194

TB-195 B-0195

TB-199 B-0199

TB-200 B-0200

TB-201 B-0201

TB-202 B-0248

TB-203 B-0203

TB-204 B-0204

TB-205 B-0205

TB-208 B-0208

TB-210 B-0210

TB-211 B-0211

TB-212 B-0212

TB-214 B-0214

TB-215 B-0215

TB-216 B-0216

TB-217 B-0217

TB-218 B-0218

TB-219 B-0219

TB-220 B-0220

TB-221 B-0221

TB-223 B-0223

TB-224 B-0224

TB-226 B-0226

TB-227 B-0227

TB-228 B-0228

TB-229 B-0229

TB-230 B-0230

TB-232 B-0232

TB-233 B-0233

TB-234 B-0234

TB-235 B-0235

TB-236 B-0236

TB-237 B-0237

TB-239 B-0239

TB-240 B-0240

TB-241 B-0241

TB-244 B-0244

TB-245 B-0245

TB-246 B-0246

TB-247 B-0247

TB-248 B-0248

TB-249 B-0249

TB-251 B-0251

TB-252 B-0252

TB-253 B-0253

TB-254 B-0254

TB-255 B-0255


325

TB-256 B-0256

TB-257 B-0257

TB-258 B-0258

TB-259 B-0259

TB-262 B-0262

TB-263 B-0263

TB-264 B-0264

TB-265 B-0265

TB-271 B-0271

TB-272 B-0272

TB-273 B-0273

TB-276 B-0276

TB-277 B-0277

TB-279 B-0279

TB-280 B-0280

TB-281 B-0281

TB-282 B-0282

TB-283 B-0283

TB-285 B-0285

TB-286 B-0286

TB-287 B-0287

TB-288 B-0288

TB-289 B-0289

TB-294 B-0294

TB-295 B-0295

TB-296 B-0296

TB-297 B-0297

TB-298 B-0298

TB-299 B-0299

TB-300 B-0300

TB-301 B-0301

TB-302 B-0302

TB-303 B-0303

TB-304 B-0304

TB-305 B-0305

TB-307 B-0307

TB-308 B-0308

TB-309 B-0309

TB-310 B-0310

TB-311 B-0311

TB-312 B-0312

TB-313 B-0313

TB-314 B-0314

TB-315 B-0315

TB-318 B-0318

TB-320 B-0320

TB-323 B-0323

TB-326 B-0236

TB-327 B-0237

TB-329 B-0329

TB-330 B-0330

TB-331 B-0331

TB-332 B-0332

TB-333 B-0333

TBK-041 B-041-1B

TBK-070 B-070-1

TBK-071 B-071-1


326

table of contents - melling...4 quality timing components since 1946 tm mell-gear tensioners, guides...

Documents