table of contents - brosco pages and forms/millwork/tur-1thru44.pdftable of contents poly-classic®...
TRANSCRIPT
TUR-1 MAY 2014
Table of Contents
Poly-Classic® Columns - Round Tapered Columns TUR-2 – 3
- Tapered Cap and Base TUR-4 – 5
- Flashing TUR-5
- Elevated Base Platforms TUR-6
- Column Installation Kits TUR-6
- Split Kit TUR-6
- Rail to Column Kit TUR-6
- TimeSaver Railing Adapter Bracket TUR-6
- Ornamental Capitals TUR-7 – 9
- Round Non-Tapered Columns and Cap & Base
TUR-10
- DuraGlass Columns and Cap & Base TUR-11
- Square Non-Tapered Columns TUR-12 – 13
- Tuscan Cap and Base TUR-13
- Pedestal Base TUR-13
- Ornamental Capitals TUR-14 – 15
Poly-Classic® DuraStone™ Columns - Round Tapered Columns TUR-16 – 17
- Tapered Cap and Base TUR-17
- Ornamental Capitals TUR-18
- Round Non-Tapered Columns and Cap & Base
TUR-19
- Square Non-Tapered Columns TUR-20 – 21
- Square Cap and Base TUR-21
Poly-Classic® Craftsman Series Columns - Square Non-Tapered Columns TUR-22 – 23
- Square Tapered Columns TUR-24
- Octagon Columns TUR-25
- Pedestals TUR-26 – 28
- Pedestal & Newel Post Trim Kits TUR-29
- Caps & Bases TUR-30 – 31
- Ornamental Capitals TUR-32 – 33
Colonial Wood Columns - Round Tapered Columns TUR-34 – 35
- Cap and Base TUR-35
- Ornamental Capitals TUR-36 – 37
- Round Non-Tapered Columns TUR-38
- Cap & Base TUR-39
- Priming / Asphalting TUR-39
Traditional Hardwood Columns - Red Oak & Cherry TUR-40
- Hard Maple & African Mahogany TUR-41
Poly-Classic® Porch Post - Colonial Porch Post and Accessories TUR-42
- Post Trim Kit TUR-42
Wood Porch Posts - Post Saver™ Mounting Blocks TUR-42
- Colonial Porch Post TUR-43
- Chamfered & Square Porch Post TUR-43
Architectural Columns - Architectural Column Styles & Options TUR-44
- Column Quote Request Form TUR-44
Columns exceeding 14" diameter and/or 16'-0" length are shipped direct to dealer from factory AND will incur a freight charge, contact BROSCO for pricing. Direct ship product must accompany a BROSCO stock shipment.
MAY 2014TUR-2
Poly-Classic RoundTapered Columns
Bottom Diameter x
Height
Complete ColumnShaft with Cap & Base
Shaft OnlyCap & Base Set
(Stock #)
Load** Bearing Capacity
Lbs.
Split Shaft*Split Kit
Smooth FlutedSmooth(Stock #)
Fluted(Stock #)
Smooth (Stock #)
Fluted(Stock #)
6" x 5'0" $ 198.00 N/A$ 147.00
N/A$51.00
6,000$ 202.00
N/A$ 66.00
71866 71851 71867 72665
6" x 6'0" 219.00 N/A168.00
N/A51.00
6,000219.00
N/A66.00
71697 71851 71699 72665
6" x 8'0" 242.00 N/A191.00
N/A51.00
6,000 241.00
N/A66.00
71698 71851 71700 72665
8" x 5'0" 206.00 N/A159.00
N/A47.00
10,000216.00
N/A66.00
24830 76163 TimeSaver 72398 72665
8" x 6'0" 228.00 N/A181.00
N/A47.00
10,000 231.00
N/A66.00
25075 76163 TimeSaver 25175 72665
8" x 8'0" 241.00 $ 315.00194.00 $ 268.00 47.00
10,000247.00 $ 316.00 66.00
62742 62752 76163 TimeSaver 62928 62937 72665
8" x 9'0" 263.00 338.00216.00 291.00 47.00
10,000280.00 352.00 66.00
24244 72235 76163 TimeSaver 25178 72407 72665
8" x 10'0" 293.00 370.00246.00 323.00 47.00
10,000309.00 375.00 66.00
62743 62753 76163 TimeSaver 62929 62938 72665
10" x 4'0" 210.00 N/A144.00
N/A66.00
14,000197.00
N/A66.00
72695 76164 TimeSaver 76554 72665
10" x 5'0" 241.00 N/A175.00
N/A66.00
14,000232.00
N/A66.00
24831 76164 TimeSaver 73602 72665
10" x 6'0" 285.00 N/A219.00
N/A66.00
14,000273.00
N/A66.00
25076 76164 TimeSaver 25176 72665
10" x 8'0" 297.00 399.00231.00 333.00 66.00
14,000285.00 375.00 66.00
62744 62754 76164 TimeSaver 62930 62939 72665
10" x 9'0" 329.00 427.00263.00 361.00 66.00
14,000328.00 423.00 66.00
24245 72236 76164 TimeSaver 25179 72408 72665
10" x 10'0" 365.00 477.00299.00 411.00 66.00
14,000364.00 457.00 66.00
62745 62755 76164 TimeSaver 62931 62940 72665
10" x 12'0" 459.00 559.00393.00 493.00 66.00
14,000430.00 546.00 66.00
62746 62756 76164 TimeSaver 62932 62941 72665
12" x 5'0" 338.00 N/A251.00
N/A87.00
18,000318.00
N/A66.00
25072 76165 TimeSaver 72580 72665
12" x 6'0" 379.00 N/A292.00
N/A87.00
18,000352.00
N/A66.00
25077 76165 TimeSaver 25177 72665
12" x 8'0" 396.00 494.00309.00 407.00 87.00
18,000366.00 460.00 66.00
62747 62757 76165 TimeSaver 62933 62942 72665
12" x 9'0" 439.00 522.00352.00 435.00 87.00
18,000418.00 507.00 66.00
24246 72240 76165 TimeSaver 25180 72409 72665
12" x 10'0" 476.00 571.00389.00 484.00 87.00
18,000464.00 546.00 66.00
62748 62758 76165 TimeSaver 62934 62943 72665
12" x 12'0" 600.00 679.00513.00 592.00 87.00
18,000542.00 659.00 66.00
62749 62759 76165 TimeSaver 62935 62944 72665
12" x 14'0" 822.00 N/A735.00
N/A87.00
18,000817.00
N/A66.00
24118 76165 TimeSaver 72519 72665
12" x 16'0" 1,259.00 1,414.001,172.00 1,327.00 87.00
18,0001,257.00 1,430.00 132.00
62750 62760 76165 TimeSaver 62936 62945 72665 (2)
Columns must be painted.
** Load capacities are reduced when loads are not centered. * Split columns ARE NOT LOAD BEARING. To split a BROSCO stock Poly-Classic Column $174.00 For 8", 10" & 12" Columns - "Complete" price includes one-piece Tuscan TimeSaver Cap & Base. For all other size Columns - "Complete" price includes one-piece Polyurethane Cap & Solid FRP Base. For additional Cap & Base options, see page TUR-4 thru 9.
Items priced in italics are factory order – please allow additional lead time.
For product specifi cations visit www.turncraft.com.
Gray Box / Bold font = Stock
TUR-3 MAY 2014
Poly-Classic RoundTapered Columns
Bottom Diameter x
Height
Complete ColumnShaft with Cap & Base
Shaft OnlyCap & Base Set
(Stock #)
Load** Bearing Capacity
Lbs.
Split Shaft*Split Kit
SmoothSmooth(Stock #)
Smooth (Stock #)
14" x 8'0" $1,009.00$ 784.00 $225.00 20,000 $ 874.00 $ 66.00
24998 71667 25030 72665
14" x 9'0" 1,021.00796.00 225.00 20,000 898.00 66.0072649 71667 72650 72665
14" x 10'0" 1,033.00808.00 225.00 20,000 949.00 66.0024999 71667 25031 72665
14" x 12'0" 1,127.00902.00 225.00 20,000 1,056.00 66.0025000 71667 25032 72665
14" x 14'0" 1,431.001,206.00 225.00 20,000 1,365.00 132.00
25001 71667 25033 72665 (2)
14" x 16'0" 1,722.00 1,497.00 225.00 20,000 1,678.00 132.0025002 71667 25034 72665 (2)
Columns exceeding 14" diameter and/or 16'-0" length are shipped direct to dealer from factory AND will incur a freight charge, contact BROSCO for pricing. Direct ship product must accompany a BROSCO stock shipment.
CUSTOM FLUTING AVAILABLEAll FRP Columns are now available custom fl uted. Turncraft will fl ute columns for your specifi c overall opening
height. Please specify the cap style and the height of the fi nished column.
CRAFTSMAN PEDESTALSCan be used with round or square FRP columns! See pages TUR-26 - 28 and 31 for sizes and styles available.
Turncraft can now provide LARGER SIZES in the Poly-Classic FRP round column line, including Tuscan caps/bases, Attic bases and Ornamental caps.
20' 22' 24' 26' 28' 30'
30" Diameter x x x x x x
36" Diameter x x x x x x
Turncraft's "Biggest Addition" ever – the ability to provide FRP columns in the sizes shown to the right, with your choice of Tuscan or Attic base, and Tuscan cap, or most of the ornamental capital styles. Please inquire to see if the style you wish is available.
Along with the other Poly-Classic columns, the large columns carry a limited lifetime warranty.
Poly-Classic Round Tapered columns available up to 24" x 24'0", please inquire.
MAY 2014TUR-4
Poly-Classic Cap and Base Options for Round Tapered Columns
Tuscan Cap and Base One Piece
Cap is polyurethane and base is FRP
ColumnDiameter
Set PriceSet
Stock #SPLIT
Stock #Cap
PriceCap
Stock #BasePrice
BaseStock #
6" $ 51.00 71851 71853 $ 22.00 71854 $ 28.00 71855
8" 61.00 72493 72994 27.00 72507 31.00 71957
10" 83.00 72494 72701 36.00 72508 41.00 71958
12" 111.00 72495 72578 49.00 72509 55.00 71959
14" 225.00 71667 71670 102.00 25144 124.00 24128
Tuscan Cap and Base
Polyurethane Foam
ColumnDiameter
Set PriceSet
Stock #SPLIT
Stock #Cap
PriceCap
Stock #BasePrice
BaseStock #
8" $ 61.00 25063 24439 $27.00 72507 $34.00 70459
10" 82.00 25064 24440 36.00 72508 45.00 70461
12" 109.00 25065 24441 49.00 72509 60.00 70463
Tuscan Fiberglass Reinforced
Polymer (FRP)
ColumnDiameter
Set PriceSet
Stock #SPLIT
Stock #Cap
PriceCap
Stock #BasePrice
BaseStock #
6" $ 51.00 72496 72686 $ 23.00 73959 $ 28.00 71855
8" 61.00 71463 71466 28.00 75642 31.00 71957
10" 82.00 71464 71467 37.00 75643 41.00 71958
12" 111.00 71465 71468 49.00 75644 55.00 71959
14" 236.00 71741 71783 102.00 24126 124.00 24128
Builder Cap and Base One Piece
Polystyrene(with Foam Core)
ColumnDiameter
Set PriceSet
Stock #
8" $31.00 73486
10" 45.00 73487
12" 53.00 73488
Tuscan Two Piece (E-Z Lock)
Polystyrene
ColumnDiameter
Set PriceSet
Stock #
8" $43.00 62815
10" 62.00 62816
12" 83.00 62817
Tuscan TimeSaverReinforced ABSwith Install Kit
(Standard)
ColumnDiameter
Set PriceSet
Stock #SPLIT
Stock #
Cap Price
(no Kit)
CapStock #(no Kit)
BasePrice
(w/Kit)
BaseStock #
8" $ 47.00 76163 76307 $25.00 70458 $29.00 76345
10" 66.00 76164 76308 34.00 70460 40.00 76346
12" 87.00 76165 76309 46.00 70462 50.00 76347
All cap and bases (except ornamental capitals) install around the shaft and do not affect the overall column height.
Items priced in italics are factory order – please allow additional lead time.
For product specifi cations visit www.turncraft.com.
Tuscan Cap & Base
Builders Series Cap & Base
Abacus
Plinth
Echinus
Torus
Gray Box / Bold font = Stock
TUR-5 MAY 2014
Flashing for Tuscan Caps
Attic Basefor RoundColumns
(FRP)
Column Diameter
PriceBase
Item #Base
Height*
6" $ 73.00 76317 31/2"8" 90.00 73679 51/8"10" 150.00 73680 61/4"12" 193.00 73767 71/4"14" 249.00 74312 821/32"
Roman DoricCap and Base
for RoundTapereredColumns
(FRP base, Polyurethane cap)
Column Diameter
Price Set Item # Cap Price CapItem #
Cap Width*
BasePrice
BaseItem #
BaseWidth*
Base Height*
6" $ 73.00 76318 $ 33.00 76327 8" $ 40.00 76336 731/32" 31/4"8" 83.00 76319 39.00 76328 101/4" 48.00 76337 107/8" 41/4"10" 116.00 76320 53.00 76329 13" 64.00 76338 131/2" 53/8"12" 159.00 76321 72.00 76330 151/8" 87.00 76339 161/8" 63/16"14" 306.00 76322 138.00 76331 1713/16" 168.00 76340 183/4" 73/8"
* Attic bases install around the shaft and do not affect the overall column height.
Roman Doric base and Attic base can also be used with round non-tapered shafts.
Torus
Plinth
Additional Cap and Base Optionsfor Round Tapered Columns
The addition of the Roman Doric caps and bases to the Poly-Classic column line will provide you with the most options ever. Roman Doric cap and base are distinguished from the Tuscan by an increase of decorative moulding. The denticulated Roman Doric cap has a stepped, three fi llet support of the echinus instead of the single fi llet on a Tuscan cap. The base is similar to the Tuscan, but the addition of a bead above the torus is an elegant embellishment. A very popular option that provides the most dramatically detailed column (without using ornamental capitals) is to use the Attic base with the Roman Doric cap.
Attic Base(FRP or Fiberglass)
Abacus
Echinus
Torus
Plinth
Flashing is available in either copper or aluminum. Flashing is 3/4" larger than abacus size, to be folded over the edges of the cap, held in place with construction adhesive (not supplied). Available for round and square Poly-Classic FRP columns with Tuscan Caps - 8", 10" and 12".
Square Tuscan
CopperFor TimeSaver
Cap
AluminumFor TimeSaver
Cap
Size(Square)
CopperFor FRP or Poly Cap
AluminumFor FRP or Poly Cap
Size(Square)
8" $17.00 $10.00 12" $17.00 $10.00 12-3/16"77365 77385 77371 77387
10" N/A N/A N/A 22.00 11.00 14-1/16"77375 77388
12" N/A N/A N/A 29.00 12.00 17-7/8"77376 77389
Round Tuscan
CopperFor TimeSaver
Cap
AluminumFor TimeSaver
Cap
Size(Square)
CopperFor FRP or Poly Cap
AluminumFor FRP or Poly Cap
Size(Square)
8" $17.00 $10.00 10-9/16" $17.00 $10.00 10-3/8"77358 77377 77361 77382
10"22.00 11.00 12-7/8" 22.00 11.00 12-11/16"77359 77378 77362 77383
12"29.00 12.00 15-3/8" 29.00 12.00 15-1/4"77360 77380 77363 77384
MAY 2014TUR-6
Elevated Base Platforms
TimeSaver™ Railing Adapter Bracket - for Tuscan Round Column Bases
Installation Kits for Poly-Classic Columns
Columns Price Each DescriptionWeight Per
CartonQty. PerCarton
71760 $ 9.00 Column Installation kit - brackets, bolts, Tapcon Screws 15 lb 25
71758 14.00 Rail to Column kit - toggle bolts, brackets, screws 2.6 oz 1
72665 66.00 Split Reassembly kit - Nylon ties, spacers, body fi ller. Two kits are required for columns 14'-0" in height and taller.
2.5 lb 1
For those installations where Poly-Classic bases need to be trimmed for pitched decks, or for adding a custom look to the standard base, these platforms are the perfect addition. Made of expanded cellular PVC, they are rot proof and durable. Designed for the standard ABS base (sizes shown below), custom sizes can be special ordered.
These DO NOT add height to the column itself, but can be used to cover customer-built column supports that are in place for increased column height.
Turncraft's new TimeSaver Railing adapter Bracket solves the age old problem of attaching a railing system to the decorative base of a round column. Simply use one of these new brackets to make an attractive attachment to any of the 8", 10" and 12" round Tuscan bases. Manufactured of fi ber reinforced 100% recycled ABS, they come in two different heights to fi t just about any railing system on the market. These brackets are perfectly contoured to create a smooth mounting surface with the base plinth. No notching or major modifi cation to the base or lower rail is required.
Base (not included)
Elevated Base Platform
NOT LOAD BEARING
Shipped KD as 5 pieces, the top plate is put on the column at the same time as the base. After the column is installed, the four sides assemble AROUND THE COLUMN with the Craftsman EZ-Lock joint, and the top is glued (polyurethane glue - not supplied) and pin-nailed in place. (The top is recessed to fi t the ABS Tuscan base and keep it centered on the platform.) The base should be glued to the platform and edges caulked before painting.
Outside Width
Column Width x Platform
Height
Platform Price
Stock #Inside Width
Set Weight
Lbs.
PalletQuantity
107/8" 8" x 6" $ 94.00 PBP0806 91/2" 4 96
107/8" 8" x 12" 141.00 PBP0812 91/2" 8.25 96
107/8" 8" x 18" 189.00 PBP0818 91/2" 12 96
131/2" 10" x 6" 111.00 PBP1006 12" 6 63
131/2" 10" x 12" 166.00 PBP1012 12" 10.5 63
131/2" 10" x 18" 222.00 PBP1018 12" 15 63
161/4" 12" x 6" 131.00 PBP1206 143/4" 7.6 36
161/4" 12" x 12" 194.00 PBP1212 143/4" 13 36
161/4" 12" x 18" 258.00 PBP1218 143/4" 18.5 36
Elevated Base Platforms, Installation Kitsand TimeSaver™ Railing Adapter Bracket
Items priced in italics are factory order – please allow additional lead time. For product specifi cations visit www.turncraft.com.
ColumnSize
Standard Bracket Tall BracketPrice Item # Depth Price Item # Depth
8" $24.00 76855 15/8" $26.00 76856 15/8"
10" 27.00 76857 115/16" 29.00 76858 115/16"
12" 30.00 76859 25/16" 32.00 76860 25/16"
Hardware is not included. Refer to railing manufacturer's installation instructions. Please verify local building codes for applicability purposes.
Depth
49 /16"
4"
Depth
69 /16"
4"
Gray Box / Bold font = Stock
TUR-7MAY 2014
Quick-Fit Poly-Classic Ornamental Capitals for Round Tapered Poly-Classic Columns
Quick-Fit ornamental capitals install around the shaft. Roman Corinthian and Greek Erectheum capitals, which are taller than the shaft neck, are load bearing. Roman Ionic and Scamozzi capitals go around the shaft (which needs to be trimmed to the height of the capital PLUS 1/8" for load support when the capital is shorter than the column neck).
The 'Height Adjust' value is used to calculate overall height (OAH) of columns when using ornamental caps, adjust by the amount shown. For example, on an 8" x 96" shaft, you would add 71/16" (1039/16" OAH) for Roman Corinthian, or subtract 11/8" (947/8" OAH) for Scamozzi.
These capitals are NOT for non-tapered shafts. Sizes shown are estimates and subject to change without notice.
Size Price Stock # Height Adjust Cap Height Abacus Width Scroll Width
6" $182.00 71922 - 7/16" 27/16" 85/8" 81/2"8" 200.00 24254 - 11/8" 3" 11" 103/16"10" 299.00 24420 - 7/8" 41/8" 141/2" 143/8"12" 420.00 24315 0 413/16" 17" 163/4"
Size Price Stock # Height Adjust Cap Height Abacus Width Scroll Width
6" $248.00 71921 511/16" 811/16" 11" N/A 8" 346.00 24313 71/16" 115/16" 145/16" N/A10" 500.00 24247 91/16" 143/16" 181/8" N/A12" 665.00 24314 121/4" 17" 213/4" N/A
Size Price Stock # Height Adjust Cap Height Abacus Width Scroll Width
6" $198.00 71920 -11/16" 23/16" 6" 8"
Size Price Stock # Height Adjust Cap Height Abacus Width Scroll Width
6" $231.00 71924 3/8" 31/4" 69/16" 83/8"
Scamozzi
Roman Corinthian
Greek Erectheum
Roman Ionic
Roman Ionic or Scamozzi Capitals: Greek Erectheum or Roman Corinthian Capitals:
Drawings NOT TO SCALE - illustrations only.
Cap slides over top of column shaft
When cap is taller than neck, do not trim the top of the shaft.
Centering Block - fi ts inside of shaft or cap
Cap slides over top of trimmed column shaft
When neck is taller than cap:
Shaft must be trimmed 1/8" taller than cap
Centering Block - fi ts inside of shaft or cap
MAY 2014TUR-8
Ornamental Capitals forRound Tapered Poly-Classic Columns
The Poly/Resin capitals on pages TUR-8 and 9 are load bearing and do not require plugs. Installation typically requires trimming the column shaft at the correct location on the neck ring - see note below each photo. If your shafts were ordered at the same time as the ornamental capital, the factory may have trimmed the shaft for you. If shafts are not factory trimmed, the installer may choose to trim the shaft above the astragal rather than between the fi llet and the ring for easier installation of Empire, Greek Angular Ionic, Greek Erectheum, Roman Ionic, Roman Doric Ornamental and Scamozzi styles. Please note that due to available molds, some sizes, while they will work, may not be the best fi t aesthetically.
The 'height adjust' value is used to calculate overall height (OAH) of columns when using ornamental caps. Please adjust by the amount shown. For example, on an 8" x 96" shaft, you would add 33/4" (993/4" OAH) for Temple of Winds, or subtract 13/4" (941/4" OAH) for Scamozzi.
These capitals are NOT for non-tapered shafts. Specifi cations shown are estimates and subject to change without notice.
Column Size Price Item # Height Adjust Cap Height Abacus Width Scroll Width
6" $296.00 71923 - 3/8" 31/8" 9" 83/4"
8" 334.00 24415 - 1" 33/4" 10" 9"
10" 395.00 24307 - 3/8" 51/2" 16" 131/2"
12" 503.00 24462 + 3/4" 61/4" 18" 17"
14" 717.00 25093 - 1/2" 71/4" 201/4" 191/2"
Column Size Price Item # Height Adjust Cap Height Abacus Width Scroll Width
6" $457.00 76498 + 37/8" 67/8" 9 83/4"
8" 564.00 76499 + 31/2" 73/4" 10" 9"
10" 644.00 76500 + 47/8" 10" 131/2" 121/4"
12" 798.00 76501 + 61/4" 11" 18" 17"
14" 943.00 76502 + 73/4" 141/2" 201/2" 191/2"
Column Size Price Item # Height Adjust Cap Height Abacus Width Scroll Width
6" $322.00 71927 + 1/8" 35/8" 91/4" 9"
8" 424.00 24308 - 1" 33/4" 91/2" 9"
10" 526.00 24774 - 1/2" 53/8" 141/4" 131/4"
12" 552.00 25098 + 1/2" 6" 171/4" 17"
14" 648.00 25119 - 1/2" 71/4" 203/4" 191/4"
Column Size Price Item # Height Adjust Cap Height Abacus Width Scroll Width
6" $285.00 76884 - 1/4" 31/4" 63/4" 81/2"
8" 315.00 25125 - 1" 33/4" 73/4" 113/4"
10" 410.00 24760 - 3/8" 51/2" 12" 171/2"
12" 524.00 24633 + 3/4" 61/4" 141/4" 21"
14" 684.00 25126 - 3/4" 7" 15" 21"
Column Size Price Item # Height Adjust Cap Height Abacus Width Scroll Width
6" $457.00 76507 + 23/4" 53/4" 73/4" 113/4"
8" 545.00 76508 + 31/4" 71/2" 101/2" 15"
10" 706.00 76509 + 33/8" 81/2" 12" 171/4"
12" 790.00 76510 + 43/4" 91/2" 141/2" 21"
14" 966.00 76511 + 41/2" 111/4" 15" 21"
Empire
Empire with Necking
Greek Angular Ionic
Greek Erectheum
Cut to bottom fi llet
Cut to neck ring
Cut to neck ring
Cut to bottom fi llet
Cut to bottom fi llet
Greek Erectheum w/Necking
TUR-9MAY 2014
Roman Ionic
Scamozzi
Temple of Winds
Roman Corinthian
Roman Doric Ornamental
Ornamental Capitals forRound Tapered Poly-Classic Columns
Column Size Price Item # Height Adjust Cap Height Abacus Width Scroll Width
6" $ 434.00 76516 + 4" 7" 8" N/A
8" 533.00 76517 + 41/4" 81/2" 103/4" N/A
10" 690.00 76518 + 71/8" 121/4" 161/2" N/A
12" 798.00 76519 + 93/4" 141/2" 19" N/A
14" 1,012.00 76520 + 101/4" 17" 20" N/A
Column Size Price Item # Height Adjust Cap Height Abacus Width Scroll Width
6" $ 372.00 76885 + 4" 7" 91/2" N/A
8" 426.00 76886 + 6" 101/4" 123/4" N/A
10" 525.00 76887 + 83/4" 137/8" 173/4" N/A
12" 752.00 76888 + 91/2" 151/2" 181/2" N/A
14" 1,182.00 25029 + 101/4" 17" 22" N/A
Column Size Price Item # Height Adjust Cap Height Abacus Width Scroll Width
6" $276.00 71925 + 1/8" 4" 83/4" N/A
8" 334.00 24713 + 11/4" 6" 131/8" N/A
10" ■ 449.00 24272 + 11/8" 7" 161/4" N/A
12" ● 487.00 24266 + 1" ● 7" 161/4" N/A
14" ● 526.00 25090 0" ● 9" 21" N/A
Column Size Price Item # Height Adjust Cap Height Abacus Width Scroll Width
6" $247.00 76889 - 11/4" 21/4" 61/8" 81/16"
8" 259.00 24136 -13/4" 3" 81/4" 101/2"
10" 384.00 24324 -21/4" 35/8" 11" 135/8"
12" 445.00 24323 - 1" 41/2" 121/2" 161/2"
14" 600.00 25129 -21/4" 51/2" 171/2" 23"
Column Size Price Item # Height Adjust Cap Height Abacus Width Scroll Width
6" $270.00 76890 - 7/8" 25/8" 73/4" 61/4"
8" 315.00 76891 - 13/4" 3" 101/4" 9"
10" 437.00 76892 - 2" 37/8" 141/2" 121/2"
12" 589.00 76893 - 5/8" 47/8" 163/4" 14"
14" 747.00 25122 - 21/4" 51/2" 19" 163/4"
Column Size Price Item # Height Adjust Cap Height Abacus Width Scroll Width
6" $266.00 71926 + 4" 7" 8" N/A
8" 334.00 24304 + 33/4" 8" 12" N/A
10" 426.00 24397 + 6" 111/8" 151/4" N/A
12" 537.00 24398 + 9" 133/4" 17" N/A
14" 706.00 25087 + 71/4" 14" 211/4" N/A
Modern Composite
Cut to neck ring
Cut to neck ring
Cut to neck ring
Cut to bottom fi llet
Cut to bottom fi llet
Cut to bottom fi llet
Items priced in italics are factory order – please allow additional lead time. For product specifi cations visit www.turncraft.com.
■ 10" will not fi t well. The cap will have a 1/2" reveal (overhang) all the way around the shaft.● Cut off entire astragal (at narrowest part of column) for best fi t.
MAY 2014TUR-10
Poly-Classic RoundNon-Tapered Columns
Bottom Diameter x
Height
Complete ColumnShaft / Cap / Base Shaft Cap & Base
Set(Stock #)
Load** Bearing Capacity
Lbs.
Split Shaft* Split Kit
Smooth Smooth(Stock #)
Smooth (Stock #)
Price (Stock #)
8" x 8'0" $ 296.00 $ 218.00 $ 78.00 10,000 $ 269.00 $ 66.00 72097 76145 72285 72665
8" x 10'0" 348.00 270.00 78.00 10,000 332.00 66.00 72106 76145 72287 72665
10" x 8'0" 391.00 277.00 114.00 14,000 328.00 66.00 71946 76146 72288 72665
10" x 10'0" 478.00 364.00 114.00 14,000 425.00 66.00 71947 76146 72294 72665
12" x 8'0" 487.00 341.00 146.00 18,000 403.00 66.00 72107 76147 72267 72665
12" x 10'0" 582.00 436.00 146.00 18,000 508.00 66.00 72108 76147 72268 72665
12" x 12'0" 690.00 544.00 146.00 18,000 626.00 66.00 72109 76147 72297 72665
14" x 8'0" 1,082.00 780.00 302.00 20,000 843.00 66.00 72111 72657 72306 72665
14" x 10'0" 1,169.00 867.00 302.00 20,000 940.00 66.00 71954 72657 72308 72665
14" x 12'0" 1,344.00 1,042.00 302.00 20,000 1,123.00 66.00 72113 72657 72310 72665
14" x 14'0" 1,503.00 1,201.00 302.00 20,000 1,290.00 132.00 72115 72657 72319 72665 (2)
Poly-Classic round non-tapered column shafts are molded from fi berglass reinforced polymer.Caps and bases are manufactured from low maintenance materials.Cap and base options: Tuscan cap and base (standard), Tuscan base and Tuscan base as cap, Attic base with Tuscan cap, Attic base and Attic base as cap, Attic base and Tuscan base as cap. See pages TUR-13 for Attic base information.Ornamental capitals are not typically available for non-tapered columns.
NEW LARGE DIAMETER SIZES AVAILABLE! The 16", 18", 20" and 24" diameter non-tapered shafts are actually the straight portion of Turncraft's large tapered columns. A small section of taper may exist on one end, but it will be covered by the base (when column is installed with tapered end at bottom).
** Load capacities are reduced when loads are not centered. * Split columns ARE NOT LOAD BEARING.
Columns must be painted.
*Caps are polyurethane - 8", 10" & 12" Bases are ABS, 14"-24" bases are FRP.
Tuscan Cap and Base for Round Non-Tapered Columns*
Shaft Diameter Set Price Stock # Cap Price Cap Stock # Base Price Base Stock #
8" $ 78.00 76145 $ 54.00 72658 $ 31.00 71957
10" 114.00 76146 80.00 72659 41.00 71958
12" 146.00 76147 100.00 72660 55.00 71959
14" 302.00 72657 178.00 72661 124.00 24128
AbacusEchinus
Torus
Plinth
CUSTOM FLUTING AVAILABLEAll FRP Columns are now available custom fl uted. Turncraft will fl ute columns for your specifi c overall opening height. Please specify the cap and base style, and overall height of the fi nished column.
Columns exceeding 14" diameter and/or 16'-0" length are shipped direct to dealer from factory AND will incur a freight charge, contact BROSCO for pricing. Direct ship product must accompany a BROSCO stock shipment.
Poly-Classic Round Non-Tapered columns available up to 24" x 15'0", please inquire.
TUR-11 MAY 2014
Designed for light weight and easy installation, this pultruded column has all the benefi ts of the Poly-Classic product line: decay resistance, load bearing and durable. This column can be easily trimmed on the jobsite.
Columns that are split for reassembly are split on the diagonal to provide larger gluing surfaces. Standard cap, base and necking for 8" columns are TimeSaver ABS. Standard cap, base and necking for 10" columns are pultruded fi berglass.
Custom lengths can be special ordered - please inquire. Columns must be painted.
Cap and base sets include neck moulding (customer installed) and installation hardware. These cap and base sets are not for use with other Poly-Classic columns due to size differences. The pultruded mouldings are factory mitered and assembled into one unit for easy installation. TimeSaver 8" sets are one-piece ABS polystyrene. 10" sets are pultruded fi berglass.
Polyurethane Tuscan Cap and Base with pultruded Neck Moulding
Tuscan Cap and Base with Neck Moulding (standard)
DuraGlass Square
Craftsman Pedestal Kits are available for square (and round) columns. See pages TUR-29 - 31 & TUR-36 for pedestals - available in smooth, raised panel or recessed panel, these install around the shaft and do not affect the overall height.
Bottom Diameter x
Height
Complete ColumnShaft / Cap / Base
Shaft Only(Stock #)
Cap & Base Set
(Stock #)
Split Shaft*Only
Diagonal Split Shaft
Stock #
Split KitPrice
(Stock #)
Load Bearing Capacity Lbs.
8" x 6'0" $257.00 $201.00 $56.00 $255.00 $263.00 $66.00
5,00073818 73816 76569 75591 72665
8" x 8'0" 310.00 254.00 56.00 315.00 319.00 66.00
5,00073819 73816 74471 75592 72665
8" x 9'0" 337.00 281.00 56.00 358.00 358.00 66.00
5,00073820 73816 75290 75593 72665
8" x 10'0" 369.00 313.00 56.00 390.00 390.00 66.00
5,00073821 73816 74472 75594 72665
8" x 12'0" 427.00 371.00 56.00 461.00 461.00 66.00
5,00073822 73816 76570 75595 72665
10" x 6'0" 295.00 235.00 60.00 299.00 299.00 66.00
6,00073823 73817 76571 75596 72665
10" x 8'0" 359.00 299.00 60.00 365.00 365.00 66.00
6,00073824 73817 74473 75597 72665
10" x 9'0" 394.00 334.00 60.00 412.00 412.00 66.00
6,00073825 73817 74475 75598 72665
10" x 10'0" 428.00 368.00 60.00 447.00 447.00 66.00
6,00073826 73817 74474 75599 72665
10" x 12'0" 499.00 439.00 60.00 531.00 531.00 66.00
6,00073827 73817 75940 75600 72665
12" x 6'0" 449.00329.00 120.00 396.00 396.00 66.00
7,00009375 09350 09352 09353 72665
12" x 8'0" 540.00420.00 120.00 489.00 489.00 66.00
7,00009332 09350 09354 09356 72665
12" x 9'0" 589.00469.00 120.00 551.00 551.00 66.00
7,00009333 09350 09357 09358 72665
12" x 10'0" 639.00519.00 120.00 603.00 603.00 66.00
7,00009334 09350 09359 09360 72665
12" x 12'0" 739.00619.00 120.00 717.00 717.00 66.00
7,00009336 09350 09361 09362 72665
** Load capacities are reduced when loads are not centered. * Split columns ARE NOT LOAD BEARING. To split a BROSCO stock Poly-Classic Column $174.00
Shaft Diameter
Set Price Stock # Cap PriceCap
Stock #Base Price
Base Stock #
Necking Price
Necking Stock #
8" $56.00 73816 $24.00 73843 $30.00 73845 $7.00 73847
10" 60.00 73817 25.00 73844 31.00 73846 8.00 73848
12" Cap/base not available in Pultruded Fiberglass - use Polyurethane (below). 9.00 09349
Shaft Diameter
Set Price Stock # Cap PriceCap
Stock #Base Price
Base Stock # Necking used with
Polyurethane cap & base is pultruded fi berglass (above).
8" $ 82.00 73849 $41.00 73851 $44.00 73853
10" 100.00 73850 50.00 73852 53.00 73854
12" 120.00 09350 55.00 09377 67.00 09378
Poly-Classic Square Non-TaperedDuraGlass Columns
Gray Box / Bold font = Stock
MAY 2014TUR-12
Poly-Classic SquareNon-Tapered Columns
Columns must be painted.
** Load capacities are reduced when loads are not centered. * Split columns ARE NOT LOAD BEARING. To split a BROSCO stock Poly-Classic Column $174.00Items priced in italics are factory order – please allow additional lead time. For product specifi cations visit www.turncraft.com.
Poly-Classic column shafts are architecturally detailed and molded from fi berglass reinforced polymer. Caps and bases are manufactured from low maintenance polyurethane.
Pedestal base (FRP) sold separately - you will need to purchase a shaft and Tuscan cap.
Pedestal base is used in conjunction with a full height Smooth 8" column shaft. The shaft fi ts inside the pedestal base.
Don't see the size you need? Check the Craftsman Series on pages TUR-22 thru TUR-33!
Bottom Diameter x
Height
Complete ColumnShaft / Cap / Base Shaft Cap & Base
Set(Stock #)
Load** Bearing
Capacity Lbs.
Split Shaft* Split Kit
Smooth Smooth(Stock #)
Smooth (Stock #)
Price (Stock #)
6" x 8'0" $ 346.00 $ 287.00 $ 59.00 6,000 $ 335.00 $ 66.00
72814 73329 72816 72665
6" x 10'0" 382.00 323.00 59.00 6,000 370.00 66.00 72815 73329 72817 72665
8" x 8'0" 438.00 367.00 71.00 10,000 418.00 66.00
72214 73330 72370 72665
8" x 9'0" 497.00 426.00 71.00 10,000 478.00 66.00
73565 73330 73566 72665
8" x 10'0" 501.00 430.00 71.00 10,000 494.00 66.00 72215 73330 72371 72665
10" x 8'0" 571.00 485.00 86.00 14,000 558.00 66.00
72415 73335 72417 72665
10" x 9'0" 634.00 548.00 86.0014,000 593.00 66.00
75530 73335 75531 72665
10" x 10'0" 673.00 587.00 86.00 14,000 667.00 66.00
72416 73335 72418 72665
10" x 12'0" 747.00 661.00 86.00 14,000 750.00 66.00 73319 73335 73320 72665
12" x 8'0" 772.00 629.00 143.00 18,000 697.00 66.00 72565 73336 72585 72665
12" x 9'0" 870.00 727.00 143.00 18,000 758.00 66.00 77163 73336 77164 72665
12" x 10'0" 904.00 761.00 143.00 18,000 837.00 66.00 72566 73336 72586 72665
12" x 12'0" 1,030.00 887.00 143.00 18,000 968.00 66.00 72567 73336 72587 72665
12" x 14'0" 1,548.00 1,405.00 143.00 18,000 1,523.00 132.00 72568 73336 72588 72665 (2)
12" x 16'0" 1,650.00 1,507.00 143.00 18,000 1,635.00 132.0072569 73336 72589 72665 (2)
14" x 8'0" 1,637.00 1,426.00 211.00 20,000 1,486.00 132.0075256 75268 75262 72665 (2)
14" x 9'0" 1,717.00 1,506.00 211.00 20,000 1,576.00 132.0075257 75268 75263 72665 (2)
14" x 10'0" 1,797.00 1,586.00 211.00 20,000 1,666.00 132.0075258 75268 75264 72665 (2)
14" x 12'0" 2,044.00 1,833.00 211.00 20,000 1,931.00 132.0075259 75268 75265 72665 (2)
14" x 14'0" 2,209.00 1,998.00 211.00 20,000 2,175.00 132.0075260 75268 75266 72665 (2)
14" x 16'0" 2,563.00 2,352.00 211.00 20,000 2,554.00 132.0075261 75268 75267 72665 (2)
ORNAMENTAL CAPITALS NOW AVAILABLE FOR SQUARE COLUMNS! See page TUR-14 and 15.
CRAFTSMAN PEDESTALS NOW AVAILABLE - MORE STYLES, MORE SIZES! See pages TUR-26 thru 28.
CUSTOM FLUTING AVAILABLEAll FRP Columns are now available
custom fl uted. Turncraft will fl ute columns for your specifi c overall
opening height. Please specify the cap and base style, and overall height of the fi nished column.
Gray Box / Bold font = Stock
TUR-13 MAY 2014
Poly-Classic SquareNon-Tapered Columns
Tuscan Cap/Base for Square Non-Tapered Columns (Standard - foam cap, foam base*)
Tuscan Cap/Base for Square Non-Tapered Columns (foam cap, FRP base)
Attic Base for Square Non-Tapered Columns (FRP)
Shaft Diameter
Set Price Set Stock # Cap Price Cap Stock # Base Price Base
Stock #6" $ 59.00 73329 $ 28.00 72820 $ 34.00 73455 8" 71.00 73330 34.00 72263 40.00 73346 10" 86.00 73335 40.00 72420 49.00 73347 12" 143.00 73336 65.00 72576 79.00 73348
14" * 211.00 75268 105.00 75270 128.00 76821Be sure to order the 8" Square cap from
above to use with the pedestal base.
8" Pedestal 627.00 73003
Shaft Diameter
Price Set Stock # Cap Price Cap Stock # Base Price Base
Stock #6" $ 59.00 72818 $ 28.00 72820 $ 34.00 72822 8" 71.00 72216 34.00 72263 40.00 72264
10" 86.00 72419 40.00 72420 49.00 72421 12" 143.00 72570 65.00 72576 79.00 72577 14" 211.00 75268 105.00 75270 128.00 76821
Shaft Diameter
PriceBase
Stock #Base
Height6" $ 77.00 76789 3 1/2" 8" 84.00 76790 51/8"
10" 134.00 76791 61/4" 12" 164.00 77165 71/4" 14" 203.00 77002 83/4"
Bottom Diameter x
Height
Complete ColumnShaft / Cap / Base Shaft Cap & Base
Set(Stock #)
Load** Bearing
Capacity Lbs.
Split Shaft* Split Kit
Fluted Fluted(Stock #)
Fluted (Stock #)
Price (Stock #)
8" x 8'0" $561.00 $490.00 $71.00 10,000 $539.00 $66.00 73086 73330 73206 72665
8" x 9'0" 653.00 582.00 71.00 10,000 642.00 66.00 73122 73330 73413 72665
8" x 10'0" 688.00 617.00 71.00 10,000 676.00 66.00 73123 73330 73368 72665
Bottom Diameter x
Height
Complete ColumnShaft / Cap / Base Shaft Cap & Base
Set(Stock #)
Load** Bearing
Capacity Lbs.
Split Shaft* Split Kit
Raised Panel Raised Panel(Stock #)
Raised Panel (Stock #)
Price (Stock #)
8" x 8'0" $550.00 $479.00 $71.00 10,000 $526.00 $66.00 06010 73330 06195 72665
8" x 9'0" 606.00 535.00 71.00 10,000 596.00 66.00 06124 73330 06196 72665
8" x 10'0" 649.00 578.00 71.00 10,000 631.00 66.00 06011 73330 06192 72665
Bottom Diameter x
Height
Complete ColumnShaft / Cap / Base Shaft Cap & Base
Set(Stock #)
Load** Bearing
Capacity Lbs.
Split Shaft* Split Kit
Recessed Panel Recessed Panel(Stock #)
Recessed Panel(Stock #)
Price (Stock #)
8" x 8'0" $568.00 $497.00 $71.00 10,000 $544.00 $66.0077007 73330 77010 72665
8" x 9'0" 639.00 568.00 71.00 10,000 629.00 66.0077008 73330 77011 72665
8" x 10'0" 651.00 580.00 71.00 10,000 640.00 66.0077009 73330 77012 72665
10" x 8'0" 711.00 625.00 86.00 12,800 694.00 66.0077159 73335 77161 72665
10" x 9'0" 822.00 736.00 86.00 12,800 807.00 66.0077166 73335 77167 72665
10" x 10'0" 836.00 750.00 86.00 12,800 826.00 66.0077160 73335 77162 72665
* 14" base is FRP.
Attic BasePedestal Base
Tuscan Cap & Base
MAY 2014TUR-14
Square Poly/Resin capitals are load bearing and do not require plugs. Installation typically requires trimming the column shaft at the correct location on the neck ring - see note below each photo. If your shafts were ordered at the same time as the ornamental capital, the factory may have trimmed the shaft for you. If shafts are not factory trimmed, the installer may choose to trim the shaft above the astragal rather than between the fi llet and the ring for easier installation of Empire, Greek Angular Ionic, Greek Erectheum, Roman Ionic, Roman Doric Ornamental and Scamozzi styles. Please note that due to available molds, some sizes, while they will work, may not be the best fi t aesthetically.
The 'height adjust' value is used to calculate overall height (OAH) of columns when using ornamental caps. Please adjust by the amount shown. For example, on an 8" x 96" shaft, you would add 51/2" (1011/2" OAH) for Temple of Winds, or subtract 17/16" (949/16" OAH) for Scamozzi.
These capitals are for square non-tapered FRP shafts. Specifi cations shown are estimates and subject to change without notice.
Column Size Price Stock # Height Adjust Cap Height Abacus Width Scroll Width
8" $334.00 76525 - 1/16" 51/4" 131/2" 121/4"
10" 503.00 76526 + 3/8" 61/4" 18" 17"
12" 717.00 76527 + 13/4" 71/4" 201/4" 191/2"
14" 882.00 76528 + 3/4" 83/4" 23" 191/2"
Column Size Price Stock # Height Adjust Cap Height Abacus Width Scroll Width
8" $418.00 76535 - 3/16" 51/8" 141/4" 133/4"
10" 552.00 76536 + 1/8"" 6" 171/4" 17"
12" 648.00 76537 + 13/4" 71/4" 203/4" 191/4"
14" 744.00 76538 + 3/8" 83/8" 201/2" 191/2"
Column Size Price Stock # Height Adjust Cap Height Abacus Width Scroll Width
6" $ 564.00 76529 + 41/8" 73/4" 10" 9"
8" 644.00 76530 + 51/2" 10" 131/2" 121/4"
10" 798.00 76531 + 515/16" 11" 18" 17"
12" 943.00 76532 + 93/4" 141/2" 201/2" 191/2"
14" 1,177.00 76533 + 10" 17" 23" 191/2"
Column Size Price Stock # Height Adjust Cap Height Abacus Width Scroll Width
6" $ 464.00 76539 + 21/8" 53/4" 73/4" 113/4"
8" 560.00 76540 + 3" 71/2" 101/2" 15"
10" 790.00 76541 + 4 7/16" 91/2" 141/2" 21"
12" 966.00 76542 + 63/4" 111/4" 15" 21"
14" 1,127.00 76543 + 61/2" 131/2" 171/2" 26"
Column Size Price Stock # Height Adjust Cap Height Abacus Width Scroll Width
6" $319.00 76400 - 11/16" 33/4" 73/4" 113/4"
8" 395.00 76401 - 1/16" 51/4" 101/2" 15"
10" 529.00 76402 + 3/8" 61/4" 141/2" 21"
12" 690.00 76403 + 21/2" 7" 15" 21"
14" 890.00 76404 + 1" 9" 171/2" 26"
Empire
Greek Angular Ionic
Empire w/Necking
Greek Erectheum w/Necking
Greek Erectheum
Photos shown above are for representation only.
Poly-Classic Square Non-TaperedOrnamental Capitals
Cut to neck ring
Cut to neck ring
Cut to bottom fi llet
Cut to bottom fi llet
Cut to bottom fi llet
TUR-15MAY 2014
Poly-Classic Square Non-TaperedOrnamental Capitals
Column Size Price Stock # Height Adjust Cap Height Abacus Width Scroll Width
6" $ 533.00 76544 + 47/8" 81/2" 103/4" N/A
8" 602.00 76545 + 7" 111/2" 161/2" N/A
10" 798.00 76546 + 97/16" 141/2" 19" N/A
12" 1,012.00 76547 + 121/2" 17" 20" N/A
14" 1,676.00 76548 + 151/2" 221/2" 25" N/A
Column Size Price Stock # Height Adjust Cap Height Abacus Width Scroll Width
6" $ 434.00 75286 + 47/8" 81/2" 12" N/A
8" 543.00 75287 + 7" 111/2" 15" N/A
10" 866.00 75288 + 97/16" 141/2" 181/2" N/A
12" 1,084.00 75289 + 121/2" 17" 22" N/A
14" 1,380.00 76465 + 13" 20" 27" N/A
Column Size Price Stock # Height Adjust Cap Height Abacus Width Scroll Width
6" $334.00 76549 + 1/16" 41/2" 101/2" N/A
8" 418.00 76550 + 11/16" 6" 141/4" N/A
12" 526.00 76552 + 31/2" 9" 21" N/A
14" 683.00 76553 + 21/2" 101/2" 24" N/A
Column Size Price Stock # Height Adjust Cap Height Abacus Width Scroll Width
6" $261.00 75572 - 17/16" 3" 81/4" 101/2"
8" 355.00 75573 - 111/16" 35/8" 101/2" 131/2"
10" 449.00 75574 - 13/8" 41/2" 121/2" 161/2"
12" 606.00 75575 0 51/2" 171/2" 23"
Column Size Price Stock # Height Adjust Cap Height Abacus Width Scroll Width
6" $319.00 75651 - 17/16" 3" 101/4" 9"
8" 441.00 75652 - 17/16" 37/8" 141/2" 121/2"
10" 476.00 75653 - 1" 47/8" 163/4" 14"
12" 679.00 75654 0 51/2" 19" 193/4"
14" 871.00 76464 - 13/4" 61/4" 221/4" 181/2"
Column Size Price Stock # Height Adjust Cap Height Abacus Width Scroll Width
6" $ 303.00 76436 + 37/8" 71/2" 101/2" N/A
8" 372.00 76437 + 51/2" 10" 137/8" N/A
10" 582.00 76438 + 69/16" 115/8" 167/8" N/A
12" 866.00 76439 + 91/2" 14" 211/4" N/A
14" 1,016.00 76440 + 9" 16" 23" N/A
Modern Composite
Scamozzi
Temple of Winds
Roman Corinthian
Roman Doric Ornamental
Cut to neck ring
Cut to neck ring
Cut to neck ring
Cut to bottom fi llet
Cut to bottom fi llet
Cut to bottom fi llet
Items priced in italics are factory order – please allow additional lead time. For product specifi cations visit www.turncraft.com.
Roman Ionic
MAY 2014TUR-16
DuraStone™ Natural FinishRound Tapered Columns
Bottom Diameter x
Height
Complete ColumnShaft with Cap & Base
Ivory(Off White)
Sand(Tan)
Slate(Gray)
End TrimSmooth
Standard Flute
Smooth Shaft
(Stock #)
Fluted Shaft
(Stock #)Cap/Base (Stock #)
Smooth Shaft
(Stock #)
Fluted Shaft
(Stock #)Cap/Base (Stock #)
Smooth Shaft
(Stock #)
Fluted Shaft
(Stock #)Cap/Base (Stock #)
6" x 6'0" $ 288.00 N/A$ 220.00
N/A$ 68.00 $ 220.00
N/A$ 68.00 $ 220.00
N/A$ 68.00
$44.0074540 74766 74618 74784 74692 74802
6" x 8'0" 317.00 N/A249.00
N/A68.00 249.00
N/A68.00 249.00
N/A68.00
44.0074541 74766 74619 74784 74693 74802
8" x 6'0" 317.00 N/A236.00
N/A81.00 236.00
N/A81.00 236.00
N/A81.00
44.0074542 74767 74620 74785 74694 74803
8" x 8'0" 338.00 ♦ $ 432.00 257.00 $351.00 81.00 257.00 $351.00 81.00 257.00 $351.00 81.00
44.0073996 74575 74767 73967 74649 74785 73985 74723 74803
8" x 9'0" 377.00 ♦ 467.00 296.00 386.00 81.00 296.00 386.00 81.00 296.00 386.00 81.00
44.0073997 74576 74767 73968 74650 74785 73986 74724 74803
8" x 10'0" 397.00 ♦ 497.00 316.00 416.00 81.00 316.00 416.00 81.00 316.00 416.00 81.00
44.0073998 74577 74767 73969 74651 74785 73987 74725 74803
10" x 6'0" 415.00 N/A291.00
N/A124.00 291.00
N/A124.00 291.00
N/A124.00
44.0074543 74768 74621 74786 74695 74804
10" x 8'0" 457.00 ♦ 553.00 333.00 429.00 124.00 333.00 429.00 124.00 333.00 429.00 124.00
44.0073999 74578 74768 73971 74652 74786 73988 74726 74804
10" x 9'0" 511.00 ♦ 603.00 387.00 479.00 124.00 387.00 479.00 124.00 387.00 479.00 124.00
44.0074000 74579 74768 73972 74653 74786 73989 74727 74804
10" x 10'0" 543.00 ♦ 648.00 419.00 524.00 124.00 419.00 524.00 124.00 419.00 524.00 124.00
44.0074001 74580 74768 73973 74654 74786 73990 74728 74804
10" x 12'0" 593.00 753.00 469.00 629.00 124.00 469.00 629.00 124.00 469.00 629.00 124.00
44.0074002 74581 74768 73974 74655 74786 73991 74729 74804
12" x 6'0" 556.00 N/A381.00
N/A175.00 381.00
N/A175.00 381.00
N/A175.00
86.0074544 74769 74622 74787 74696 74805
12" x 8'0" 618.00 ♦ 704.00 443.00 529.00 175.00 443.00 529.00 175.00 443.00 529.00 175.00
86.0074003 74582 74769 73976 74656 74787 73992 74730 74805
12" x 9'0" 702.00 ♦ 752.00 527.00 577.00 175.00 527.00 577.00 175.00 527.00 577.00 175.00
86.0074004 74583 74769 73977 74657 74787 73993 74731 74805
12" x 10'0" 737.00 ♦ 804.00 562.00 629.00 175.00 562.00 629.00 175.00 562.00 629.00 175.00
86.0074005 74584 74769 73978 74658 74787 73994 74732 74805
12" x 12'0" 785.00 936.00 610.00 761.00 175.00 610.00 761.00 175.00 610.00 761.00 175.00
86.0074006 74585 74769 73979 74659 74787 73995 74733 74805
12" x 14'0" 1,135.00 N/A960.00
N/A175.00 960.00
N/A175.00 960.00
N/A175.00
86.0076572 74769 76573 74787 76574 74805
12" x 16'0" 1,705.00 1,935.00 1,530.00 1,760.00 175.00 1,530.00 1,760.00 175.00 1,530.00 1,760.00 175.00
86.0074545 74586 74769 74623 74660 74787 74697 74734 74805
Turncraft's natural fi nish columns are designed for exterior applications where the look and feel of stone is preferred. Available in three colors, they retain all the strengths and benefi ts of the FRP Poly-Classic columns and are low maintenance.
• No fi nishing required! Column shaft, cap and base are Fiberglass-Reinforced Polymer.
• Limited Lifetime Warranty — never replace your columns again!
• With Flame Guard — ASTME, 84-01 Class I Flame-Spread classifi cation and Smoke Developed Index of 335 — well below the allowable SDI index of 450.
• Columns are manufactured as one centrifugal-rotocast piece from fi berglass-reinforced polymer (FRP).
• Weatherproof, insect-proof, rot-proof - virtually maintenance free.
• Load Bearing - pound for pound stronger than concrete, steel or aluminum **
• Tuscan or Attic bases install around shaft. Tuscan cap is load bearing and sets on top.
• Bases for 18" and larger will ship split in half.
• Matching Square and Non-Tapered columns available.
• Patent Pending
** Load capacities are reduced when loads are not centered. Cap and Base are also split when ordered with split shafts. Split columns ARE NOT LOAD BEARING. Split and Reassembly is typically not recommended because the seam will not match the texture/color of the rest of the column. BROSCO stock columns are available split Plan D only. Call for pricing on factory split columns.
Smooth Standard Custom Flute Flute
CUSTOM FLUTING AVAILABLE
All Poly-Classic Columns are now available fl uted. Turncraft will fl ute
for your specifi c overall opening height. Call for pricing.
♦ Stocked in Ivory only.
TUR-17 MAY 2014
DuraStone™ Natural FinishRound Tapered Columns
Bottom Diameter x
Height
Complete ColumnShaft with Cap & Base
Ivory(Off White)
Sand(Tan)
Slate(Gray)
End TrimSmooth Smooth Shaft
(Stock #)Cap/Base (Stock #)
Smooth Shaft (Stock #)
Cap/Base (Stock #)
Smooth Shaft (Stock #)
Cap/Base (Stock #)
14" x 8'0" $1,323.00 $1,025.00 $298.00 $1,025.00 $298.00 $1,025.00 298.00
$86.00 74547 74770 74625 74788 74699 74806
14" x 9'0" 1,338.00 1,040.00 298.00 1,040.00 298.00 1,040.00 298.00
86.00 74548 74770 74626 74788 74700 74806
14" x 10'0" 1,353.00 1,055.00 298.00 1,055.00 298.00 1,055.00 298.00
86.00 74549 74770 74627 74788 74701 74806
14" x 12'0" 1,477.00 1,179.00 298.00 1,179.00 298.00 1,179.00 298.00
86.00 74550 74770 74628 74788 74702 74806
14" x 14'0" 1,873.00 1,575.00 298.00 1,575.00 298.00 1,575.00 298.00
86.00 74551 74770 74629 74788 74703 74806
14" x 16'0" 2,254.00 1,956.00 298.00 1,956.00 298.00 1,956.00 298.00
86.00 74552 74770 74630 74788 74704 74806
Both the cap and the base are FRP. The cap is set on TOP of the shaft, the base slides around the bottom. The cap is LOAD-BEARING, and has a slightly smaller diameter than the shaft. This may affect users who need to install DuraStone™ columns around an existing load support. Bases for 16" and larger columns are shipped split in half.
Tuscan Cap and Base - Tapered Round
TUSCAN PROFILE
Items priced in italics are factory order – please allow additional lead time. For product specifi cations visit www.turncraft.com.
♦ Stocked in Ivory only.Gray Box / Bold font = Stock
DuraStone™ Round Tapered columns available up to 24" x 24'0", please inquire.
Tuscan Round
Tapered Cap and Base
ColumnDiameter
Set Price
IvoryStock #
SandStock #
SlateStock #
Cap Price
IvoryStock #
SandStock #
SlateStock #
Base Price
IvoryStock #
SandStock #
SlateStock #
6" $ 68.00 74766 74784 74802 $ 31.00 75329 75353 75377 $ 38.00 75336 75360 75384
8" 81.00 ♦ 74767 74785 74803 37.00 75330 75354 75378 47.00 75337 75361 75385
10" 124.00 ♦ 74768 74786 74804 58.00 75331 75355 75379 70.00 75338 75362 75386
12" 175.00 ♦ 74769 74787 74805 82.00 75332 75356 75380 99.00 75339 75363 75387
14" 298.00 74770 74788 74806 134.00 75333 75357 75381 178.00 75340 75364 75388
Attic Round Base
Use with cap from Tuscan set (above)
ColumnDiameter
Base Price
IvoryStock #
SandStock #
SlateStock #
8" $115.00 74778 74796 74814
10" 190.00 74779 74797 74815
12" 243.00 74780 74798 74816
14" 314.00 74781 74799 74817 ATTIC PROFILE
Torus
Plinth
MAY 2014TUR-18
DuraStone™ Ornamental Capitalsfor Round Tapered Columns
Scamozzi
Roman Corinthian
Roman Ionic
Greek Erectheum
DuraStone Ornamental Capitals are all load bearing. Scamozzi and Roman Corinthian capitals are installed around the shaft, which is NOT trimmed. When installing Greek Erectheum and Roman Ionic capitals, the shaft must be trimmed to the neck ring.
The 'height adjust' column is used to calculate overall height (OAH) of columns when using ornamental caps. Please adjust by the amount shown. For example, on an 8" x 8' shaft, you would add 71/16" (1039/16" OAH) for Roman Corinthian, or subtract 11/16" (9415/16" OAH) for Scamozzi.
These capitals are NOT for non-tapered shafts. Sizes shown are estimates and subject to change without notice.
Size PriceIvory
Stock #Sand
Stock #Slate
Stock #Height Adjust
Cap Height
Abacus Width
Scroll Width
6" $305.00 76743 76744 76745 1/4" 31/4" 69/16" 83/8"
Size PriceIvory
Stock #Sand
Stock #Slate
Stock #Height Adjust
Cap Height
Abacus Width
Scroll Width
6" $262.00 76746 76747 76748 - 13/16" 23/16" 6" 8"
Size PriceIvory
Stock #Sand
Stock #Slate
Stock #Height Adjust
Cap Height
Abacus Width
Scroll Width
6" $375.00 76731 76735 76739 511/16" 811/16" 11" N/A
8" 456.00 76732 76736 76740 71/16" 115/16" 145/16" N/A
10" 659.00 76733 76737 76741 91/16" 143/16" 181/8" N/A
12" 877.00 76734 76738 76742 121/4" 17" 213/4" N/A
Size PriceIvory
Stock #Sand
Stock #Slate
Stock #Height Adjust
Cap Height
Abacus Width
Scroll Width
6" $234.00 76715 76719 76727 - 5/16" 27/16" 85/8" 81/2"
8" 264.00 76716 76720 76728 - 11/16" 31/16" 11" 1013/16"
10" 394.00 76717 76721 76729 - 1" 41/8" 141/2" 143/8"
12" 554.00 76718 76722 76730 1/16" 413/16" 17" 163/4"
Drawings NOT TO SCALE - illustrations only.
Greek Erectheum or Roman Ionic Capitals: Roman Corinthian or Scamozzi Capitals:
Cap slides over top of column shaft
Centering Block - fi ts inside of shaft or cap(provided by others)
Cut off shaft at neck ring:
Centering Block - fi ts inside of shaft or cap(provided by others)
TUR-19MAY 2014
DuraStone™ Natural FinishRound Non-Tapered Columns
Bottom Diameter x
Height
Complete ColumnShaft with Cap & Base
Ivory(Off White)
Sand(Tan)
Slate(Gray)
End TrimSmooth Smooth Shaft
(Stock #)Cap/Base (Stock #)
Smooth Shaft (Stock #)
Cap/Base (Stock #)
Smooth Shaft (Stock #)
Cap/Base (Stock #)
8" x 8'0" $ 402.00 $ 299.00 $103.00 $ 299.00 $103.00 $ 299.00 $103.00 $ 44.0074587 75479 74661 75483 74735 75487
8" x 10'0" 461.00 358.00 103.00 358.00 103.00 358.00 103.00 44.0074588 75479 74662 75483 74736 75487
10" x 8'0" 518.00 367.00 151.00 367.00 151.00 367.00 151.00 44.0074589 75480 74663 75484 74737 75488
10" x 10'0" 633.00 482.00 151.00 482.00 151.00 482.00 151.00 44.0074590 75480 74664 75484 74738 75488
12" x 8'0" 645.00 452.00 193.00 452.00 193.00 452.00 193.00 86.0074591 75481 74665 75485 74739 75489
12" x 10'0" 771.00 578.00 193.00 578.00 193.00 578.00 193.00 86.0074592 75481 74666 75485 74740 75489
12" x 12'0" 915.00 722.00 193.00 722.00 193.00 722.00 193.00 86.0074593 75481 74667 75485 74741 75489
14" x 8'0" 1,434.00 1,034.00 400.00 1,034.00 400.00 1,034.00 400.00 86.0074594 75482 74668 75486 74742 75490
14" x 10'0" 1,550.00 1,150.00 400.00 1,150.00 400.00 1,150.00 400.00 86.0074595 75482 74669 75486 74743 75490
14" x 12'0" 1,781.00 1,381.00 400.00 1,381.00 400.00 1,381.00 400.00 86.0074596 75482 74670 75486 74745 75490
14" x 14'0" 1,992.00 1,592.00 400.00 1,592.00 400.00 1,592.00 400.00 86.0074597 75482 74671 75486 74746 75490
Turncraft's new natural fi nish columns are designed for exterior applications where the look and feel of stone is preferred. Available in three colors, they retain all the strengths and benefi ts of the FRP Poly-Classic columns and are low maintenance.
• No fi nishing required! Column shaft, cap and base are Fiberglass-Reinforced Polymer.• Specifi cations, ship weight and load capacities match the Poly-Classic columns.• Limited Lifetime Warranty — never replace your columns again!• With Flame Guard — ASTME, 84-01 Class I Flame-Spread classifi cation and Smoke Developed Index of 335 — well below the allowable SDI index of 450.• Columns are manufactured as one centrifugal-rotocast piece from fi berglass-reinforced polymer (FRP).• Weatherproof, insect-proof, rot-proof - virtually maintenance free. • Load Bearing - pound for pound stronger than concrete, steel or aluminum. **• Tuscan or Attic bases install around shaft. Tuscan cap is load bearing.• Bases for 18" and larger will ship in half.• Matching Square and Non-Tapered columns available.• Patent Pending
CUSTOM FLUTING AVAILABLE
All Poly-Classic Columns are now available fl uted. Turncraft will fl ute for your specifi c
overall opening height. Call for pricing.
** Load capacities are reduced when loads are not centered. Cap and Base are also split when ordered with split shafts. Split columns ARE NOT LOAD BEARING. Split and Reassembly is typically not recommended because the seam will not match the texture/color of the rest of the column. BROSCO stock columns are available split Plan D only. Call for pricing on factory split columns.
Items priced in italics are factory order – please allow additional lead time. For product specifi cations visit www.turncraft.com.
DuraStone™ Round Non-Tapered columns available up to 24" x 15'0", please inquire.
Tuscan Round
NON-Tapered Cap & Base
ColumnDiameter
Set Price
IvoryStock #
SandStock #
SlateStock #
Cap Price
IvoryStock #
SandStock #
SlateStock #
Base Price
IvoryStock #
SandStock #
SlateStock #
8" $103.00 75479 75483 75487 $ 60.00 75491 75495 75499 $ 47.00 75337 75361 7538510" 151.00 75480 75484 75488 94.00 75492 75496 75500 70.00 75338 75362 7538612" 193.00 75481 75485 75489 119.00 75493 75497 75501 99.00 75339 75363 7538714" 400.00 75482 75486 75490 241.00 75494 75498 75502 178.00 75340 75364 75388
Attic Round Base
Use with cap from Tuscan set (above)
ColumnDiameter
Base Price
IvoryStock #
SandStock #
SlateStock #
8" $115.00 74778 74796 7481410" 190.00 74779 74797 7481512" 243.00 74780 74798 7481614" 314.00 74781 74799 74817 ATTIC PROFILE
Torus
Plinth
TUSCAN PROFILE
MAY 2014TUR-20
DuraStone™ Natural FinishSquare Non-Tapered Columns
Bottom Diameter x
Height
Complete ColumnShaft with Cap & Base
Ivory(Off White)
Sand(Tan)
Slate(Gray)
End TrimSmooth Smooth Shaft
(Stock #)Cap/Base (Stock #)
Smooth Shaft (Stock #)
Cap/Base (Stock #)
Smooth Shaft (Stock #)
Cap/Base (Stock #)
6" x 8'0" $ 434.00 $ 362.00 $ 72.00 $ 362.00 $ 72.00 $ 362.00 $ 72.00 $44.0074598 74773 74672 74791 74744 74809
6" x 10'0" 480.00 408.00 72.00 408.00 72.00 408.00 72.00 44.0074599 74773 74673 74791 74747 74809
8" x 8'0" 551.00 463.00 88.00 463.00 88.00 463.00 88.00 44.0074600 74774 74674 74792 74748 74810
8" x 9'0" 591.00 503.00 88.00 503.00 88.00 503.00 88.00 44.0074601 74774 74675 74792 74749 74810
8" x 10'0" 630.00 542.00 88.00 542.00 88.00 542.00 88.00 44.0074602 74774 74676 74792 74750 74810
10" x 8'0" 722.00 612.00 110.00 612.00 110.00 612.00 110.00 44.0074603 74775 74677 74793 74751 74811
10" x 9'0" 801.00 691.00 110.00 691.00 110.00 691.00 110.00 44.0075476 74775 75477 74793 75478 74811
10" x 10'0" 851.00 741.00 110.00 741.00 110.00 741.00 110.00 44.0074604 74775 74678 74793 74752 74811
10" x 12'0" 945.00 835.00 110.00 835.00 110.00 835.00 110.00 44.0074605 74775 74679 74793 74753 74811
12" x 8'0" 962.00 793.00 169.00 793.00 169.00 793.00 169.00 86.0074606 74776 74680 74794 74754 74812
12" x 10'0" 1,087.00 918.00 169.00 918.00 169.00 918.00 169.00 86.0074607 74776 74681 74794 74755 74812
12" x 12'0" 1,130.00 961.00 169.00 961.00 169.00 961.00 169.00 86.0074608 74776 74682 74794 74756 74812
12" x 14'0" 1,288.00 1,119.00 169.00 1,119.00 169.00 1,119.00 169.00 86.0074609 74776 74683 74794 74757 74812
12" x 16'0" 1,996.00 1,827.00 169.00 1,827.00 169.00 1,827.00 169.00 86.0074610 74776 74684 74794 74758 74812
14" x 8'0" 2,245.00 1,959.00 286.00 1,959.00 286.00 1,959.00 286.00 86.0075155 75174 75161 75175 75167 75176
14" x 9'0" 2,463.00 2,177.00 286.00 2,177.00 286.00 2,177.00 286.00 86.0075156 75174 75162 75175 75168 75176
14" x 10'0" 2,578.00 2,292.00 286.00 2,292.00 286.00 2,292.00 286.00 86.0075157 75174 75163 75175 75169 75176
14" x 12'0" 2,912.00 2,626.00 286.00 2,626.00 286.00 2,626.00 286.00 86.0075158 75174 75164 75175 75170 75176
14" x 14'0" 3,350.00 3,064.00 286.00 3,064.00 286.00 3,064.00 286.00 86.0075159 75174 75165 75175 75171 75176
14" x 16'0" 3,787.00 3,501.00 286.00 3,501.00 286.00 3,501.00 286.00 86.0075160 75174 75166 75175 75172 75176
Turncraft's new natural fi nish columns are designed for exterior applications where the look and feel of stone is preferred. Available in three colors, they retain all the strengths and benefi ts of the FRP Poly-Classic columns and are low maintenance. Please call for quotes on 20" and 24" diameter columns.
• No fi nishing required! Column shaft, cap and base are Fiberglass-Reinforced Polymer.
• Specifi cations, ship weight and load capacities match the Poly-Classic columns.
• Limited Lifetime Warranty — never replace your columns again!
• With Flame Guard — ASTME, 84-01 Class I Flame-Spread classifi cation and Smoke Developed Index of 335 — well below the allowable SDI index of 450.
• Columns are manufactured as one centrifugal-rotocast piece from fi berglass-reinforced polymer (FRP).
• Weatherproof, insect-proof, rot-proof - virtually maintenance free.
• Load Bearing - pound for pound stronger than concrete, steel or aluminum.**
• Tuscan or Attic bases install around shaft. Tuscan cap is load bearing.
• Matching Square and Non-Tapered columns available.
• Patent Pending
CUSTOM FLUTING AVAILABLE
All Poly-Classic Columns are now available fl uted. Turncraft will fl ute for your specifi c overall opening height. Call for pricing.
** Load capacities are reduced when loads are not centered. Cap and Base are also split when ordered with split shafts. Split columns ARE NOT LOAD BEARING. Split and Reassembly is typically not recommended because the seam will not match the texture/color of the rest of the column. BROSCO stock columns are available split Plan D only. Call for pricing on factory split columns.
TUR-21 MAY 2014
Items priced in italics are factory order – please allow additional lead time. For product specifi cations visit www.turncraft.com.
Bottom Diameter x
Height
Complete ColumnShaft with Cap & Base
Ivory(Off White)
Sand(Tan)
Slate(Gray)
End TrimStandard Flute Fluted Shaft
(Stock #)Cap/Base (Stock #)
Fluted Shaft(Stock #)
Cap/Base (Stock #)
Fluted Shaft(Stock #)
Cap/Base (Stock #)
8" x 8'0" $708.00 $620.00 $88.00 $620.00 $88.00 $620.00 $88.00
$44.0074611 74774 74685 74792 74759 74810
8" x 9'0" 823.00 735.00 88.00 735.00 88.00 735.00 88.00
44.0074612 74774 74686 74792 74760 74810
8" x 10'0" 866.00 778.00 88.00 778.00 88.00 778.00 88.00
44.0074613 74774 74687 74792 74761 74810
Bottom Diameter x
Height
Complete ColumnShaft with Cap & Base
Ivory(Off White)
Sand(Tan)
Slate(Gray)
End TrimRaised Panel
Paneled Shaft(Stock #)
Cap/Base (Stock #)
Paneled Shaft(Stock #)
Cap/Base (Stock #)
Paneled Shaft(Stock #)
Cap/Base (Stock #)
8" x 8'0" $692.00 $604.00 $88.00 $604.00 $88.00 $604.00 $88.00
$44.0074614 74774 74688 74792 74762 74810
8" x 9'0" 762.00 674.00 88.00 674.00 88.00 674.00 88.00
44.0074615 74774 74689 74792 74763 74810
8" x 10'0" 808.00 720.00 88.00 720.00 88.00 720.00 88.00
44.0074616 74774 74690 74792 74764 74810
Bottom Diameter x
Height
Complete ColumnShaft with
Cap & Base
Ivory(Off White)
Sand(Tan)
Slate(Gray)
End Trim
Recessed PanelPaneled
Shaft(Stock #)
Split Shaft(Stock #)
Cap/Base (Stock #)
Paneled Shaft
(Stock #)Split Shaft(Stock #)
Cap/Base (Stock #)
Paneled Shaft
(Stock #)Split Shaft(Stock #)
Cap/Base (Stock #)
8" x 8'0" $ 727.00$639.00 $ 702.00 $ 88.00 $639.00 $ 702.00 $ 88.00 $639.00 $ 702.00 $ 88.00
$44.0077177 77183 74774 77192 77227 74792 77233 77239 74810
8" x 9'0" 820.00732.00 810.00 88.00 732.00 810.00 88.00 732.00 810.00 88.00
44.0077178 77184 74774 77215 77228 74792 77234 77240 74810
8" x 10'0" 835.00747.00 825.00 88.00 747.00 825.00 88.00 747.00 825.00 88.00
44.0077179 77185 74774 77216 77229 74792 77235 77241 74810
10" x 8'0" 914.00804.00 893.00 110.00 804.00 893.00 110.00 804.00 893.00 110.00
44.0077180 77186 74775 77223 77230 74793 77236 77242 74811
10" x 9'0" 1,058.00948.00 1,042.00 110.00 948.00 1,042.00 110.00 948.00 1,042.00 110.00
44.0077181 77187 74775 77224 77231 74793 77237 77243 74811
10" x 10'0" 1,076.00966.00 1,065.00 110.00 966.00 1,065.00 110.00 966.00 1,065.00 110.00
44.0077182 77191 74775 77226 77232 74793 77238 77244 74811
DuraStone™ Natural FinishSquare Non-Tapered Columns
Tuscan Square
NON-Tapered Cap & Base
ColumnDiameter
Set Price
IvoryStock #
SandStock #
SlateStock #
Cap Price
IvoryStock #
SandStock #
SlateStock #
Base Price
IvoryStock #
SandStock #
SlateStock #
6" $ 72.00 74773 74791 74809 $ 33.00 75343 75367 75391 $ 40.00 75348 75372 75396
8" 88.00 74774 74792 74810 41.00 75344 75368 75392 51.00 75349 75373 75397
10" 110.00 74775 74793 74811 51.00 75345 75369 75393 63.00 75350 75374 75398
12" 169.00 74776 74794 74812 77.00 75346 75370 75394 95.00 75351 75375 75399
14" 286.00 75174 75175 75176 125.00 75347 75371 75395 154.00 75352 75376 75400
Pedestal Base 8"Be sure to order the correct 8" Square cap from above to use with the pedestal base.
$807.00 74617 74691 74765
Both the cap and the base are FRP. The cap is set on TOP of the shaft, the base slides around the bottom. The cap is LOAD-BEARING and has a slightly smaller diameter than the shaft. This may affect users who need to install DuraStone™ columns around an existing load support.
AbacusEchinus
Torus
Plinth
TUSCAN PROFILE
MAY 2014TUR-22
Poly-Classic Craftsman SeriesNon-Tapered Columns
Bottom Width* x Height
Complete ColumnShaft with Cap & Base
Shaft Only Cap & Base Set(Stock #)Smooth Fluted
Raised Panel
Square CornerRaised Panel
Recessed Panel
Smooth(Stock #)
Fluted(Stock #)
Raised Panel(Stock #)
Square Corner Raised Panel✬
Recessed Panel (Stock #)
6" x 4' $214.00 $247.00 $259.00 $270.00 $349.00 $156.00 $189.00 $201.00 $212.00 $291.00 $58.00 P060604P P060604F P060604R P060604Q P060604C P001606
6" x 5' 238.00 274.00 289.00 301.00 386.00 180.00 216.00 231.00 243.00 328.00 58.00 P060605P P060605F P060605R P060605Q P060605C P001606
6" x 6' 260.00 303.00 319.00 333.00 420.00 202.00 245.00 261.00 275.00 362.00 58.00 P060606P P060606F P060606R P060606Q P060606C P001606
6" x 8' 305.00 346.00 365.00 382.00 491.00247.00 288.00 307.00 324.00 433.00 58.00
P060608P P060608F P060608R P060608Q P060608C P001606
6" x 9' 318.00 364.00 385.00 402.00 532.00 260.00 306.00 327.00 344.00 474.00 58.00 P060609P P060609F P060609R P060609Q P060609C P001606
6" x 10' 331.00 383.00 405.00 423.00 574.00 273.00 325.00 347.00 365.00 516.00 58.00 P060610P P060610F P060610R P060610Q P060610C P001606
6" x 12' 372.00 431.00 457.00 477.00 651.00 314.00 373.00 399.00 419.00 593.00 58.00 P060612P P060612F P060612R P060612Q P060612C P001606
8" x 4' 240.00 275.00 288.00 290.00 414.00 170.00 205.00 218.00 220.00 344.00 70.00 P080804P P080804F P080804R P080804Q P080804C P001608
8" x 5' 266.00 307.00 322.00 324.00 459.00 196.00 237.00 252.00 254.00 389.00 70.00 P080805P P080805F P080805R P080805Q P080805C P001608
8" x 6' 294.00 341.00 357.00 360.00 506.00 224.00 271.00 287.00 290.00 436.00 70.00 P080806P P080806F P080806R P080806Q P080806C P001608
8" x 8' 348.00 406.00 426.00 430.00 598.00278.00 336.00 356.00 360.00 528.00 70.00
P080808P P080808F P080808R P080808Q P080808C P001608
8" x 9' 384.00 445.00 467.00 471.00 653.00 314.00 375.00 397.00 401.00 583.00 70.00 P080809P P080809F P080809R P080809Q P080809C P001608
8" x 10' 421.00 483.00 508.00 513.00 708.00351.00 413.00 438.00 443.00 638.00 70.00
P080810P P080810F P080810R P080810Q P080810C P001608
8" x 12' 473.00 545.00 574.00 579.00 803.00 403.00 475.00 504.00 509.00 733.00 70.00 P080812P P080812F P080812R P080812Q P080812C P001608
10" x 4' 285.00 322.00 336.00 339.00 474.00 203.00 240.00 254.00 257.00 392.00 82.00 P101004P P101004F P101004R P101004Q P101004C P001610
10" x 5' 318.00 361.00 378.00 381.00 530.00 236.00 279.00 296.00 299.00 448.00 82.00 P101005P P101005F P101005R P101005Q P101005C P001610
10" x 6' 355.00 403.00 422.00 426.00 589.00 273.00 321.00 340.00 344.00 507.00 82.00 P101006P P101006F P101006R P101006Q P101006C P001610
10" x 8' 410.00 483.00 507.00 511.00 702.00328.00 401.00 425.00 429.00 620.00 82.00
P101008P P101008F P101008R P101008Q P101008C P001610
10" x 9' 436.00 525.00 551.00 556.00 761.00 354.00 443.00 469.00 474.00 679.00 82.00 P101009P P101009F P101009R P101009Q P101009C P001610
10" x 10' 462.00 567.00 596.00 601.00 821.00380.00 485.00 514.00 519.00 739.00 82.00
P101010P P101010F P101010R P101010Q P101010C P001610
10" x 12' 551.00 639.00 673.00 679.00 931.00 469.00 557.00 591.00 597.00 849.00 82.00 P101012P P101012F P101012R P101012Q P101012C P001610
Poly-Classic Craftsman series non-tapered KD columns are available smooth, raised panel, recessed panel or fl uted.
Limited Lifetime Warranty.E-Z Lock joints for easy installation.Precision milled expanded cellular PVC.Low maintenance, rot proof, water proof, insect proof.Require minimal warehouse space - ship KD (knockdown) and palletized.Custom options available.Columns must be painted.
Standard sizes of paneled and fl uted columns have approximately 71/2" of smoothspace below the detail to allow up to 6" fi eld trimming for various heights.
Poly-Classic Craftsman Series Columns are Not Load Bearing.BROSCO recommends the use of TrimWelder adhesives - see section CM.
Gray Box / Bold font = Stock Cap and Base Options – Page TUR-31.
TUR-23 MAY 2014
✬ Approximately 1/8" radius corner.* Actual net width is 3/8" less than nominal (before trimming). Standard cap & base add 5" to the net width.
Items priced in italics are factory order – please allow additional lead time. For product specifi cations visit www.turncraft.com.
Poly-Classic Craftsman SeriesNon-Tapered Columns
Bottom Width* x Height
Complete ColumnShaft with Cap & Base
Shaft Only Cap & Base Set(Stock #)Smooth Fluted
Raised Panel
Square CornerRaised Panel
Recessed Panel
Smooth(Stock #)
Fluted(Stock #)
Raised Panel(Stock #)
Square Corner Raised Panel✬
Recessed Panel (Stock #)
12" x 4' $ 316.00 $ 353.00 $ 368.00 $ 371.00 $ 513.00$ 222.00 $ 259.00 $ 274.00 $ 277.00 $ 419.00 $ 94.00
P121204P P121204F P121204R P121204Q P121204C P001612
12" x 5' 354.00 397.00 415.00 418.00 575.00260.00 303.00 321.00 324.00 481.00 94.00
P121205P P121205F P121205R P121205Q P121205C P001612
12" x 6' 380.00 426.00 446.00 449.00 614.00286.00 332.00 352.00 355.00 520.00 94.00
P121206P P121206F P121206R P121206Q P121206C P001612
12" x 8' 453.00 511.00 536.00 541.00 734.00359.00 417.00 442.00 447.00 640.00 94.00
P121208P P121208F P121208R P121208Q P121208C P001612
12" x 9' 504.00 562.00 591.00 596.00 807.00410.00 468.00 497.00 502.00 713.00 94.00
P121209P P121209F P121209R P121209Q P121209C P001612
12" x 10' 554.00 614.00 645.00 651.00 880.00460.00 520.00 551.00 557.00 786.00 94.00
P121210P P121210F P121210R P121210Q P121210C P001612
12" x 12' 623.00 692.00 728.00 735.00 998.00529.00 598.00 634.00 641.00 904.00 94.00
P121212P P121212F P121212R P121212Q P121212C P001612
14" x 8' 612.00 712.00 759.00 765.00 957.00481.00 581.00 628.00 634.00 826.00 131.00
P141408P P141408F P141408R P141408Q P141408C P001614
14" x 10' 732.00 858.00 915.00 924.00 1,154.00601.00 727.00 784.00 793.00 1,023.00 131.00
P141410P P141410F P141410R P141410Q P141410C P001614
14" x 12' 853.00 1,003.00 1,072.00 1,082.00 1,351.00722.00 872.00 941.00 951.00 1,220.00 131.00
P141412P P141412F P141412R P141412Q P141412C P001614
14" x 14' 973.00 1,148.00 1,229.00 1,241.00 1,549.00842.00 1,017.00 1,098.00 1,110.00 1,418.00 131.00
P141414P P141414F P141414R P141414Q P141414C P001614
Square Corner ✬
Raised PanelRecessed Panel Raised PanelFluted Panel
Poly-Classic Craftsman Non-Tapered columns available up to 20" x 20'0", please inquire.
Cap and Base Options – Page TUR-31.
MAY 2014TUR-24
Poly-Classic Craftsman SeriesTapered Columns
Bottom Width >Top Width* x
Height
Complete ColumnShaft with Cap & Base
Shaft Only Cap & Base Set
(Stock #)Smooth Raised Panel
Square CornerRaised Panel
Recessed Panel
Smooth(Stock #)
Raised Panel(Stock #)
Square CornerRaised Panel ✬
Recessed Panel (Stock #)
10" > 6" x 4' $ 284.00 $ 342.00 $ 356.00 $ 452.00 $199.00 $257.00 $ 271.00 $367.00 $ 85.00 P100604P P100604R P100604Q P100604C P000310
10" > 6" x 5' 324.00 382.00 398.00 508.00 239.00 297.00 313.00 423.00 85.00 P100605P P100605R P100605Q P100605C P000310
10" > 6" x 6' 361.00 419.00 437.00 561.00 276.00 334.00 352.00 476.00 85.00 P100606P P100606R P100606Q P100606C P000310
10" > 6" x 8' 432.00 491.00 512.00 663.00 347.00 406.00 427.00 578.00 85.00 P100608P P100608R P100608Q P100608C P000310
10" > 6" x 10' 541.00 612.00 640.00 836.00 456.00 527.00 555.00 751.00 85.00 P100610P P100610R P100610Q P100610C P000310
12" > 8" x 4' 341.00 400.00 416.00 538.00 235.00 294.00 310.00 432.00 106.00 P120804P P120804R P120804Q P120804C P000312
12" > 8" x 5' 388.00 446.00 464.00 605.00 282.00 340.00 358.00 499.00 106.00
P120805P P120805R P120805Q P120805C P000312
12" > 8" x 6' 432.00 488.00 508.00 668.00 326.00 382.00 402.00 562.00 106.00
P120806P P120806R P120806Q P120806C P000312
12" > 8" x 8' 516.00 570.00 594.00 788.00 410.00 464.00 488.00 682.00 106.00
P120808P P120808R P120808Q P120808C P000312
12" > 8" x 10' 644.00 709.00 741.00 992.00 538.00 603.00 635.00 886.00 106.00 P120810P P120810R P120810Q P120810C P000312
16" > 12" x 4' 423.00 477.00 495.00 638.00 289.00 343.00 361.00 504.00 134.00 P161204P P161204R P161204Q P161204C P000316
16" > 12" x 5' 482.00 536.00 557.00 725.00 348.00 402.00 423.00 591.00 134.00
P161205P P161205R P161205Q P161205C P000316
16" > 12" x 6' 542.00 591.00 615.00 805.00 408.00 457.00 481.00 671.00 134.00
P161206P P161206R P161206Q P161206C P000316
16" > 12" x 8' 651.00 695.00 725.00 959.00 517.00 561.00 591.00 825.00 134.00
P161208P P161208R P161208Q P161208C P000316
16" > 12" x 10' 813.00 865.00 903.00 1,207.00 679.00 731.00 769.00 1,073.00 134.00 P161210P P161210R P161210Q P161210C P000316
20" > 14" x 4' 523.00 571.00 592.00 757.00 351.00 399.00 420.00 585.00 172.00 P201404P P201404R P201404Q P201404C P000320
20" > 14" x 5' 603.00 646.00 671.00 868.00 431.00 474.00 499.00 696.00 172.00
P201405P P201405R P201405Q P201405C P000320
20" > 14" x 6' 636.00 714.00 742.00 968.00 464.00 542.00 570.00 796.00 172.00
P201406P P201406R P201406Q P201406C P000320
20" > 14" x 8' 764.00 844.00 879.00 1,159.00 592.00 672.00 707.00 987.00 172.00 P201408P P201408R P201408Q P201408C P000320
20" > 14" x 10' 950.00 1,049.00 1,096.00 1,461.00 778.00 877.00 924.00 1,289.00 172.00 P201410P P201410R P201410Q P201410C P000320
Poly-Classic Craftsman series tapered KD columns are available smooth, with raised panels or recessed panel.
Limited Lifetime Warranty.
E-Z Lock joints for easy installation.
Precision milled expanded cellular PVC.
Low maintenance, rot proof, water proof, insect proof.
Shipped KD (knockdown) and palletized.
Custom options available.
Columns must be painted.
Standard sizes of paneled and fl uted columns have approximately 71/2" of smooth space below the detail to allow up to 6" fi eld trimming for various heights.
Poly-Classic Craftsman Series Columns are Not Load Bearing.
BROSCO recommends the use of TrimWelder adhesives - see section CM.
✬ Approximately 1/8" radius corner.* Actual net width is 3/8" less than nominal (before trimming). Standard cap & base add 5" to the net width.
Items priced in italics are factory order – please allow additional lead time. For product specifi cations visit www.turncraft.com.
Gray Box / Bold font = Stock
Poly-Classic Craftsman Tapered columns available up to 24" > 16" x 10'0", please inquire.
Cap and Base Options – Page TUR-30.
TUR-25 MAY 2014
Poly-Classic® Craftsman SeriesOctagon Non-Tapered Columns
Octagon (8 sided) Craftsman Series columns, caps and bases easily install around existing load supports (see diagram below). Columns must be painted.
ColumnSize*
Complete Column Shaft with Cap & Base
Shaft PriceStock #
Cap & Base SetStock #
8" x 6' $321.00 $244.00 $ 77.00 P080806A PA01608
8" x 8' 379.00 302.00 77.00 P080808A PA01608
8" x 10' 458.00 381.00 77.00 P080810A PA01608
10" x 6' 387.00 297.00 90.00 P101006A PA01610
10" x 8' 447.00 357.00 90.00 P101008A PA01610
10" x 10' 503.00 413.00 90.00 P101010A PA01610
12" x 8' 495.00 391.00 104.00P121208A PA01612
12" x 10' 604.00 500.00 104.00P121210A PA01612
12" x 12' 679.00 575.00 104.00P121212A PA01612
14" x 8' 658.00 514.00 144.00P141408A PA01614
14" x 10' 786.00 642.00 144.00P141410A PA01614
14" x 12' 914.00 770.00 144.00P141412A PA01614
*Net shaft size is 5/8" less than nominal.
Packaging:
Due to the unique one-piece construction of the Octagon column, these ship folded to a fl at shape as shown here:
NOT LOAD BEARING
BROSCO recommends the use of TrimWelder adhesives - see section CM.
Items priced in italics are factory order – please allow additional lead time. For product specifi cations visit www.turncraft.com.
MAY 2014TUR-26
Poly-Classic® Craftsman SeriesPedestals
Pedestal shafts are 1" less than nominal height. Flat top trim kits include a 1" top plate (for support of column) so pedestal/newel overall height fi nishes at stated height. Pyramid cap newel post trim kits do not have a top plate. The overall height is 1" less than nominal (cap adds extra height - center of cap is higher than nominal). See page TUR-31 for description of standard available trim options. Customizing of trim choices and pedestal sizes are also available. Columns must be painted.
Nominal Width* x Height
Pedestal Shaft WITHOUT Trim ADD FLAT TOP TRIM KIT (Pedestal or Newel)
ADD PYRAMID TOP TRIM KIT (Newel Post Only)
Smooth Raised Panel Recessed Panel Standard Prairie Standard Prairie
6" x 36" $132.00 $148.00 $231.00$53.00 $58.00
$106.00 $112.00P060636P P060636R P060636C PSTP006 PPTP006
6" x 40" 142.00 159.00 249.0053.00 58.00
106.00 112.00P060640P P060640R P060640C PSTP006 PPTP006
6" x 42"147.00 164.00 258.00
53.00 58.00106.00 112.00
P060642P P060642R P060642C PSTP006 PPTP006
6" x 44" 151.00 170.00 266.0053.00 58.00
106.00 112.00P060644P P060644R P060644C PSTP006 PPTP006
6" x 48" 160.00 180.00 282.0053.00 58.00
106.00 112.00P060648P P060648R P060648C PSTP006 PPTP006
6" x 54" 171.00 191.00 294.0053.00 58.00
106.00 112.00P060654P P060654R P060654C PSTP006 PPTP006
6" x 60" 184.00 206.00 317.0053.00 58.00
106.00 112.00P060660P P060660R P060660C PSTP006 PPTP006
8" x 36" 138.00 151.00 272.0062.00 73.00
117.00 127.00P080836P P080836R P080836C PSTP008 PPTP008
8" x 40" 149.00 162.00 294.0062.00 73.00
117.00 127.00P080840P P080840R P080840C PSTP008 PPTP008
8" x 42"154.00 168.00 304.00
62.00 73.00117.00 127.00
P080842P P080842R P080842C PSTP008 PPTP008
8" x 44" 159.00 173.00 314.0062.00 73.00
117.00 127.00P080844P P080844R P080844C PSTP008 PPTP008
8" x 48" 168.00 184.00 332.0062.00 73.00
117.00 127.00P080848P P080848R P080848C PSTP008 PPTP008
8" x 54" 180.00 197.00 348.0062.00 73.00
117.00 127.00P080854P P080854R P080854C PSTP008 PPTP008
8" x 60" 194.00 212.00 376.0062.00 73.00
117.00 127.00P080860P P080860R P080860C PSTP008 PPTP008
10" x 36" 165.00 176.00 311.0078.00 88.00
132.00 143.00P101036P P101036R P101036C PSTP010 PPTP010
10" x 40" 178.00 189.00 335.0078.00 88.00
132.00 143.00P101040P P101040R P101040C PSTP010 PPTP010
10" x 42"186.00 196.00 346.00
78.00 88.00132.00 143.00
P101042P P101042R P101042C PSTP010 PPTP010
10" x 44" 194.00 202.00 358.0078.00 88.00
132.00 143.00P101044P P101044R P101044C PSTP010 PPTP010
10" x 48" 201.00 214.00 379.0078.00 88.00
132.00 143.00P101048P P101048R P101048C PSTP010 PPTP010
10" x 54" 216.00 231.00 387.0078.00 88.00
132.00 143.00P101054P P101054R P101054C PSTP010 PPTP010
10" x 60" 233.00 250.00 433.0078.00 88.00
132.00 143.00P101060P P101060R P101060C PSTP010 PPTP010
12" x 36" 180.00 189.00 332.0092.00 99.00
147.00 154.00P121236P P121236R P121236C PSTP012 PPTP012
12" x 40" 194.00 204.00 358.0092.00 99.00
147.00 154.00P121240P P121240R P121240C PSTP012 PPTP012
12" x 42"201.00 211.00 370.00
92.00 99.00147.00 154.00
P121242P P121242R P121242C PSTP012 PPTP012
12" x 44" 207.00 218.00 382.0092.00 99.00
147.00 154.00P121244P P121244R P121244C PSTP012 PPTP012
12" x 48" 219.00 231.00 405.0092.00 99.00
147.00 154.00P121248P P121248R P121248C PSTP012 PPTP012
12" x 54" 238.00 251.00 431.0092.00 99.00
147.00 154.00P121254P P121254R P121254C PSTP012 PPTP012
12" x 60" 257.00 271.00 465.0092.00 99.00
147.00 154.00P121260P P121260R P121260C PSTP012 PPTP012
* Actual net width is 3/8" less than nominal. Typically, pedestals are 4" wider than the column it is supporting.
NEW SIZES AVAILABLE!
NEW!
NEW!
NEW!
NEW!
TUR-27 MAY 2014
* Actual net width is 3/8" less than nominal. Typically, pedestals are 4" wider than the column it is supporting.
Poly-Classic® Craftsman SeriesPedestals
Nominal Width* x Height
Pedestal Shaft WITHOUT Trim ADD FLAT TOP TRIM KIT (Pedestal or Newel)
ADD PYRAMID TOP TRIM KIT (Newel Post Only)
Smooth Raised Panel Recessed Panel Standard Prairie Standard Prairie
14" x 36" $314.00 $378.00 $449.00$109.00 $114.00
$164.00 $170.00P141436P P141436R P141436C PSTP014 PPTP014
14" x 40" 322.00 387.00 468.00109.00 114.00
164.00 170.00P141440P P141440R P141440C PSTP014 PPTP014
14" x 42"324.00 388.00 475.00
109.00 114.00164.00 170.00
P141442P P141442R P141442C PSTP014 PPTP014
14" x 44"325.00 389.00 481.00
109.00 114.00164.00 170.00
P141444P P141444R P141444C PSTP014 PPTP014
14" x 48" 327.00 391.00 488.00109.00 114.00
164.00 170.00P141448P P141448R P141448C PSTP014 PPTP014
14" x 54"328.00 393.00 508.00
109.00 114.00164.00 170.00
P141454P P141454R P141454C PSTP014 PPTP014
14" x 60" 330.00 395.00 519.00109.00 114.00
164.00 170.00P141460P P141460R P141460C PSTP014 PPTP014
16" x 36" 334.00 399.00 463.00120.00 128.00
177.00 186.00P161636P P161636R P161636C PSTP016 PPTP016
16" x 40" 348.00 414.00 492.00120.00 128.00
177.00 186.00P161640P P161640R P161640C PSTP016 PPTP016
16" x 42"353.00 418.00 505.00
120.00 128.00177.00 186.00
P161642P P161642R P161642C PSTP016 PPTP016
16" x 44" 357.00 423.00 517.00120.00 128.00
177.00 186.00P161644P P161644R P161644C PSTP016 PPTP016
16" x 48" 361.00 426.00 538.00120.00 128.00
177.00 186.00P161648P P161648R P161648C PSTP016 PPTP016
16" x 54" 375.00 440.00 576.00120.00 128.00
177.00 186.00P161654P P161654R P161654C PSTP016 PPTP016
16" x 60" 382.00 445.00 607.00120.00 128.00
177.00 186.00P161660P P161660R P161660C PSTP016 PPTP016
18" x 36" 360.00 424.00 489.00136.00 143.00
195.00 202.00P181836P P181836R P181836C PSTP018 PPTP018
18" x 40" 379.00 446.00 528.00136.00 143.00
195.00 202.00P181840P P181840R P181840C PSTP018 PPTP018
18" x 42"387.00 454.00 547.00
136.00 143.00195.00 202.00
P181842P P181842R P181842C PSTP018 PPTP018
18" x 44" 394.00 463.00 565.00136.00 143.00
195.00 202.00P181844P P181844R P181844C PSTP018 PPTP018
18" x 48" 405.00 474.00 599.00136.00 143.00
195.00 202.00P181848P P181848R P181848C PSTP018 PPTP018
18" x 54" 428.00 499.00 654.00136.00 143.00
195.00 202.00P181854P P181854R P181854C PSTP018 PPTP018
18" x 60" 444.00 516.00 705.00136.00 143.00
195.00 202.00P181860P P181860R P181860C PSTP018 PPTP018
20" x 36" 384.00 448.00 513.00150.00 159.00
212.00 220.00P202036P P202036R P202036C PSTP020 PPTP020
20" x 40" 409.00 477.00 564.00150.00 159.00
212.00 220.00P202040P P202040R P202040C PSTP020 PPTP020
20" x 42"420.00 490.00 589.00
150.00 159.00212.00 220.00
P202042P P202042R P202042C PSTP020 PPTP020
20" x 44" 431.00 502.00 614.00150.00 159.00
212.00 220.00P202044P P202044R P202044C PSTP020 PPTP020
20" x 48" 449.00 523.00 662.00150.00 159.00
212.00 220.00P202048P P202048R P202048C PSTP020 PPTP020
20" x 54" 482.00 560.00 737.00150.00 159.00
212.00 220.00P202054P P202054R P202054C PSTP020 PPTP020
20" x 60" 510.00 592.00 810.00150.00 159.00
212.00 220.00P202060P P202060R P202060C PSTP020 PPTP020
NEW SIZES AVAILABLE!
Craftsman Pedestal Bases available up to 30" x 60", please inquire.
NEW!
NEW!
NEW!
NEW!
MAY 2014TUR-28
Poly-Classic® Craftsman SeriesPedestals
Nominal Width* x Height
Pedestal Shaft WITHOUT Trim ADD FLAT TOP TRIM KIT (Pedestal or Newel)
ADD PYRAMID TOP TRIM KIT (Newel Post Only)
Smooth Raised Panel Recessed Panel Standard Prairie Standard Prairie
22" x 36"$411.00 $475.00 $ 539.00
$166.00 $174.00$230.00 $239.00
P222236P P222236R P222236C PSTP022 PPTP022
22" x 40"443.00 505.00 603.00
166.00 174.00230.00 239.00
P222240P P222240R P222240C PSTP022 PPTP022
22" x 42"457.00 518.00 635.00
166.00 174.00230.00 239.00
P222242P P222242R P222242C PSTP022 PPTP022
22" x 44"472.00 530.00 666.00
166.00 174.00230.00 239.00
P222244P P222244R P222244C PSTP022 PPTP022
22" x 48"498.00 551.00 731.00
166.00 174.00230.00 239.00
P222248P P222248R P222248C PSTP022 PPTP022
22" x 54"542.00 589.00 827.00
166.00 174.00230.00 239.00
P222254P P222254R P222254C PSTP022 PPTP022
22" x 60"581.00 619.00 923.00
166.00 174.00230.00 239.00
P222260P P222260R P222260C PSTP022 PPTP022
24" x 36"485.00 557.00 628.00
190.00 191.00256.00 257.00
P242436P P242436R P242436C PSTP024 PPTP024
24" x 40"528.00 598.00 712.00
190.00 191.00256.00 257.00
P242440P P242440R P242440C PSTP024 PPTP024
24" x 42"549.00 617.00 755.00
190.00 191.00256.00 257.00
P242442P P242442R P242442C PSTP024 PPTP024
24" x 44"570.00 635.00 799.00
190.00 191.00256.00 257.00
P242444P P242444R P242444C PSTP024 PPTP024
24" x 48"609.00 669.00 888.00
190.00 191.00256.00 257.00
P242448P P242448R P242448C PSTP024 PPTP024
24" x 54"670.00 725.00 1,018.00
190.00 191.00256.00 257.00
P242454P P242454R P242454C PSTP024 PPTP024
24" x 60"729.00 775.00 1,153.00
190.00 191.00256.00 257.00
P242460P P242460R P242460C PSTP024 PPTP024
NEW SIZES AVAILABLE!
NEW!
NEW!
Pedestal shafts are 1" less than nominal height. Flat top trim kits include a 1" top plate (for support of column) so pedestal/newel overall height fi nishes at stated height. Pyramid cap newel post trim kits do not have a top plate. The overall height is 1" less than nominal (cap adds extra height - center of cap is higher than nominal). See page TUR-31 for description of standard available trim options. Customizing of trim choices and pedestal sizes are also available. Columns must be painted.
TUR-29 MAY 2014
Poly-Classic® Craftsman SeriesPedestals / Newel Posts
Standard Pedestal Kits for ALL Turncraft Synthetic Columns
Turncraft now has two standard profi les for column pedestals or newel posts. While originally designed for Craftsman columns, pedestals can be used to install around a round or square column★ (except wood). Typically, the pedestal is about the same width as the base of the column which will be set on it. Be sure the top platform is wider than the base being used with the column.
Standard Trim
Flat top styles have a 1" thick top platform that is 2" wider than the pedestal or newel shaft.
Width of pyramid cap will be 21/4" wider than the newel post shaft.
Standard TrimPrairie Trim Prairie Trim
Trim Kits for Pedestals or Flat Top Newels ★
Pedestal Trim Kits – Top cut out for column support ★
Newel Post Trim Kits – Solit tops (no cut out) ★
Trim Kits for Pyramid Top Newel Posts ¹
Nominal Width of Shaft ❖
Standard Trim Kit Prairie Trim Kit
List Price Stock Number Base Width List Price Stock Number Base Width
6" $ 53.00 PST0006 67 /8" $ 58.00 PPT0006 81 /8"
8" 62.00 PST0008 87 /8" 73.00 PPT0008 101 /8"
10" 78.00 PST0010 107 /8" 88.00 PPT0010 121 /8"
12" 92.00 PST0012 127 /8" 99.00 PPT0012 141 /8"
14" 109.00 PST0014 147 /8" 114.00 PPT0014 161 /8"
16" 120.00 PST0016 167 /8" 128.00 PPT0016 181 /8"
18" 136.00 PST0018 187 /8" 143.00 PPT0018 201 /8"
20" 150.00 PST0020 207 /8" 159.00 PPT0020 221 /8"
22" 166.00 PST0022 227 /8" 174.00 PPT0022 241 /8"
24" 190.00 PST0024 247 /8" 191.00 PPT0024 261 /8"
Nominal Width ofShaft ❖
Standard Trim Kits for Newels Prairie Trim Kit Approx.Pyramid Cap
Height ¹FLAT TOP PYRAMID TOP FLAT TOP PYRAMID TOP
List Price Stock # List Price Stock # List Price Stock # List Price Stock #
6" $ 53.00 PNST006 $106.00 PSTP006 $ 58.00 PNPT006 $112.00 PPTP006 21 /16"
8" 62.00 PNST008 117.00 PSTP008 73.00 PNPT008 127.00 PPTP008 21 /2"
10" 78.00 PNST010 132.00 PSTP010 88.00 PNPT010 143.00 PPTP010 27/8"
12" 92.00 PNST012 147.00 PSTP012 99.00 PNPT012 154.00 PPTP012 31 /4"
14" 109.00 PNST014 164.00 PSTP014 114.00 PNPT014 170.00 PPTP014 35 /8"
16" 120.00 PNST016 177.00 PSTP016 128.00 PNPT016 186.00 PPTP016 4"
18" 136.00 PNST018 195.00 PSTP018 143.00 PNPT018 202.00 PPTP018 43 /8"
20" 150.00 PNST020 212.00 PSTP020 159.00 PNPT020 220.00 PPTP020 413 /16"
22" 166.00 PNST022 230.00 PSTP022 174.00 PNPT022 239.00 PPTP022 53 /16"
24" 190.00 PNST024 256.00 PSTP024 191.00 PNPT024 257.00 PPTP024 59 /16"
★ For use as pedestal, the top platform will have the standard "V" cut to allow installation around a load bearing support. Newel post trim kit platforms are not cut out.¹ Pyramid caps do not have a top platform. Shaft heights are 1" less than nominal. So the shaft NOMINAL height, plus the cap height will be the fi nish height of the newel post.❖ Net width of shaft is 3 /8" less than nominal.
Items priced in italics are factory order – please allow additional lead time. For product specifi cations visit www.turncraft.com.
MAY 2014TUR-30
Poly-Classic® Craftsman SeriesTapered Cap and Base
STANDARD
CROWN
PRAIRIE
ColumnWidth
Set PriceSet StockNumber
Cap Price
Cap StockNumber
CapWidth
CapHeight*
Base Price
Base StockNumber
BaseWidth
BaseHeight*
10" $ 85.00 P000310 $38.00 P000210 95/8" 21/8" $47.00 P000110 135/8" 25/8"
12" 106.00 P000312 48.00 P000212 115/8" 21/8" 59.00 P000112 155/8" 25/8"
16" 134.00 P000316 60.00 P000216 155/8" 21/8" 74.00 P000116 195/8" 25/8"
20" 172.00 P000320 77.00 P000220 175/8" 21/8" 95.00 P000120 235/8" 25/8"
ColumnWidth
Set PriceSet StockNumber
Cap Price
Cap StockNumber
CapWidth
CapHeight*
Base Price
Base StockNumber
BaseWidth
BaseHeight*
10" $111.00 P000410 $50.00 P000510 115/8" 4" $ 61.00 P000610 155/8" 4"
12" 133.00 P000412 59.00 P000512 135/8" 4" 73.00 P000612 175/8" 4"
16" 168.00 P000416 75.00 P000516 175/8" 4" 92.00 P000616 215/8" 4"
20" 215.00 P000420 96.00 P000520 195/8" 4" 118.00 P000620 255/8" 4"
ColumnWidth
Set PriceSet StockNumber
Cap Price
Cap StockNumber
CapWidth
CapHeight*
Base Price
Base StockNumber
BaseWidth
BaseHeight*
10" $143.00 P000810 $ 57.00 P001010 95/8" 41/4" $ 86.00 P001110 135/8" 41/4"
12" 166.00 P000812 70.00 P001012 115/8" 41/4" 96.00 P001112 155/8" 41/4"
16" 197.00 P000816 76.00 P001016 155/8" 41/4" 122.00 P001116 195/8" 41/4"
20" 257.00 P000820 111.00 P001020 175/8" 41/4" 146.00 P001120 235/8" 41/4"
Standard Crown Prairie
* The total height of the cap and bases (shown above) do NOT add to the overall height of the column. The bottom and top plates add 1" each (2" total) to the shaft height, allowing extra fl exibility in installation.
Standard Crown Prairie Standard Mission Tuscan Prairie
Tapered Non-Tapered
Mix and match! In addition to the standard cap and base styles, there are several other patterns available. The cap and base styles shown here can be used to customize pedestals.
Columns must be painted.
Items priced in italics are factory order – please allow additional lead time. For product specifi cations visit www.turncraft.com.
Gray Box / Bold font = Stock
TUR-31R MAY 2014 REVISED
STANDARD
MISSION - more dramatic profile, 1" thick stock, excellent for larger column sizes.
TUSCAN - 6" through 12" match Poly-Classic square FRP columns. 14" and larger use a 14" Tuscan profile.
PRAIRIE
ColumnWidth Set Price
Set StockNumber
Cap Price
Cap StockNumber
CapWidth
CapHeight
Base Price
Base StockNumber
BaseWidth
BaseHeight
Add-On for Neck
Moulding
Neck Moulding
Stock Number6" $ 58.00 P001606 $26.00 P000706 67/8" 71/4" $32.00 P000906 67/8" 91/4" $ 8.00 PN068" 70.00 P001608 32.00 P000708 87/8" 71/4" 39.00 P000908 87/8" 91/4" 10.00 PN08
10" 82.00 P001610 37.00 P000710 107/8" 71/4" 45.00 P000910 107/8" 91/4" 13.00 PN1012" 94.00 P001612 43.00 P000712 127/8" 71/4" 52.00 P000912 127/8" 91/4" 15.00 PN1214" 131.00 P001614 59.00 P000714 147/8" 71/4" 72.00 P000914 147/8" 91/4" 17.00 PN14
ColumnWidth Set Price
Set StockNumber
Cap Price
Cap StockNumber
CapWidth
CapHeight
Base Price
Base StockNumber
BaseWidth
BaseHeight
Add-On for Neck
Moulding
Neck Moulding
Stock Number6" $116.00 PM01606 $ 52.00 PM00706 75/8" 71/4" $ 64.00 PM00906 75/8" 91/4" $ 8.00 PN068" 140.00 PM01608 63.00 PM00708 95/8" 71/4" 77.00 PM00908 95/8" 91/4" 10.00 PN08
10" 164.00 PM01610 74.00 PM00710 115/8" 71/4" 90.00 PM00910 115/8" 91/4" 13.00 PN1012" 188.00 PM01612 85.00 PM00712 135/8" 71/4" 104.00 PM00912 135/8" 91/4" 15.00 PN1214" 261.00 PM01614 118.00 PM00714 155/8" 71/4" 144.00 PM00914 155/8" 91/4" 17.00 PN14
ColumnWidth Set Price
Set StockNumber
Cap Price
Cap StockNumber
CapWidth
CapHeight
Base Price
Base StockNumber
BaseWidth
BaseHeight
Add-On for Neck
Moulding
Neck Moulding
Stock Number6" $ 90.00 P002006 $ 41.00 P002106 87/16" 21/32" $ 50.00 P002206 8" 37/32" $ 8.00 PN068" 114.00 P002008 52.00 P002108 111/4" 211/16" 63.00 P002208 107/8" 41/4" 10.00 PN08
10" 133.00 P002010 60.00 P002110 137/32" 39/16" 74.00 P002210 131/2" 51/4" 13.00 PN1012" 185.00 P002012 84.00 P002112 171/4" 37/8" 102.00 P002212 17" 6" 15.00 PN1214" 388.00 P002014 175.00 P002114 19" 5" 213.00 P002214 185/8" 71/2" 17.00 PN14
ColumnWidth Set Price
Set StockNumber
Cap Price
Cap StockNumber
CapWidth
CapHeight
Base Price
Base StockNumber
BaseWidth
BaseHeight
Add-On for Neck
Moulding
Neck Moulding
Stock Number6" $ 46.00 P001206 $23.00 P001306 81/8" 31/4" $23.00 P001406 81/8" 31/4" $ 8.00 PN068" 61.00 P001208 31.00 P001308 101/8" 31/4" 31.00 P001408 101/8" 31/4" 10.00 PN08
10" 76.00 P001210 38.00 P001310 121/8" 31/4" 38.00 P001410 121/8" 31/4" 13.00 PN1012" 92.00 P001212 46.00 P001312 141/8" 31/4" 46.00 P001412 141/8" 31/4" 15.00 PN1214" 106.00 P001214 53.00 P001314 161/8" 31/4" 53.00 P001414 161/8" 31/4" 17.00 PN14
Poly-Classic® Craftsman SeriesNon-Tapered Cap and Base
The Non-Tapered cap/base patterns do not add any height to the overall height of the column.
The cap/base patterns shown below can be used to customize Craftsman Pedestals.
Standard Mission Tuscan Prairie
Optional "Add-On" Neck Moulding
Items priced in italics are factory order – please allow additional lead time. For product specifications visit www.turncraft.com.
Gray Box / Bold font = Stock
MAY 2014TUR-32
Poly-Classic® Craftsman SeriesNon-Tapered Ornamental Capitals
Now you can add Ornamental Capitals to the standard size non-tapered Craftsman column offering! Made of poly/resin composite, these capitals will not rot or deteriorate. If you are using fl uted or paneled shafts, Turncraft will adjust the fl utes/panels accordingly - the fi nished column opening height is required. Since Craftsman columns are not load bearing, these capitals are shipped SPLIT IN HALF to allow for installation around the load support inside the column.
Size Price Stock # Cap Height Abacus Width Scroll Width
6" $293.00 EM06SQ 33/4" 10" 9" 8" 351.00 EM08SQ 51/4" 131/2" 121/4"
10" 493.00 EM10SQ 61/4" 18" 17"12" 719.00 EM12SQ 71/4" 201/4" 191/2"14" 869.00 EM14SQ 83/4" 23" 191/2"
Size Price Stock # Cap Height Abacus Width Scroll Width
6" $301.00 GE06SQ 33/4" 73/4" 113/4" 8" 366.00 GE08SQ 51/4" 101/2" 15"
10" 508.00 GE10SQ 61/4" 141/2" 21"12" 670.00 GE12SQ 63/4" 15" 201/2"14" 853.00 GE14SQ 9" 171/2" 26"
Size Price Stock # Cap Height Abacus Width Scroll Width
6" $ 468.00 GN06SQ 53/4" 73/4" 113/4" 8" 556.00 GN08SQ 71/2" 101/2" 15"
10" 806.00 GN10SQ 91/2" 141/2" 21" 12" 990.00 GN12SQ 111/4" 15" 21" 14" 1,136.00 GN14SQ 131/2" 171/2" 26"
Size Price Stock # Cap Height Abacus Width Scroll Width
6" $ 577.00 EN06SQ 73/4" 10" 9" 8" 648.00 EN08SQ 10" 131/2" 121/4"
10" 815.00 EN10SQ 11" 18" 17"12" 965.00 EN12SQ 141/2" 201/2" 191/2"14" 1,190.00 EN14SQ 17" 23" 191/2"
Size Price Stock # Cap Height Abacus Width Scroll Width
8" $401.00 GA08SQ 51/8" 141/4" 133/4" 10" 547.00 GA10SQ 6" 171/4" 17"12" 643.00 GA12SQ 71/4" 203/4" 191/4"14" 719.00 GA14SQ 83/8" 201/2" 191/2"
Empire
Greek Angular Ionic
Empire w/Necking
Greek Erectheum w/Necking
Greek Erectheum
(with optional neck moulding)
(with optional neck moulding)
Items priced in italics are factory order – please allow additional lead time. For product specifi cations visit www.turncraft.com.
TUR-33MAY 2014
Poly-Classic® Craftsman SeriesNon-Tapered Ornamental Capitals
Modern Composite
Scamozzi
Temple of Winds
Roman Corinthian
Roman Doric Ornamental
(with optional neck moulding)
Items priced in italics are factory order – please allow additional lead time. For product specifi cations visit www.turncraft.com.
Roman Ionic
Size Price Stock # Cap Height Abacus Width Scroll Width
6" $ 543.00 MC06SQ 81/2" 103/4" N/A8" 602.00 MC08SQ 111/2" 161/2" N/A
10" 815.00 MC10SQ 141/2" 19" N/A12" 1,040.00 MC12SQ 17" 20" N/A
Size Price Stock # Cap Height Abacus Width Scroll Width
6" $ 407.00 RC06SQ 81/2" 12" N/A8" 463.00 RC08SQ 12" 15" N/A
10" 565.00 RC10SQ 141/2" 181/2" N/A12" 894.00 RC12SQ 17" 22" N/A14" 1,373.00 RC14SQ 20" 27" N/A
Size Price Stock # Cap Height Abacus Width Scroll Width
6" $238.00 RI06SQ 3" 81/4" 101/2" 8" 254.00 RI08SQ 35/8" 101/2" 131/2"
10" 419.00 RI10SQ 41/2" 121/2" 161/2" 12" 576.00 RI12SQ 51/2" 171/2" 23" 14" 628.00 RI14SQ 61/8" 171/2" 22"
Size Price Stock # Cap Height Abacus Width Scroll Width
6" $298.00 SC06SQ 27/8" 10" 8" 8" 399.00 SC08SQ 31/2" 11" 93/8"
10" 447.00 SC10SQ 47/8" 163/4" 14" 12" 652.00 SC12SQ 51/2" 19" 163/4" 14" 825.00 SC14SQ 61/4" 221/4" 181/2"
Size Price Stock # Cap Height Abacus Width Scroll Width
6" $282.00 TW06SQ 71/2" 101/2" N/A8" 338.00 TW08SQ 10" 137/8" N/A
10" 471.00 TW10SQ 115/8" 167/8" N/A12" 636.00 TW12SQ 16" 19" N/A14" 978.00 TW14SQ 16" 23" N/A
Size Price Stock # Cap Height Abacus Width Scroll Width
6" $326.00 RD06SQ 41/2" 101/2" N/A8" 401.00 RD08SQ 6" 141/4" N/A
10" 435.00 RD10SQ 7" 161/4" N/A12" 510.00 RD12SQ 9" 21" N/A14" 652.00 RD14SQ 101/2" 24" N/A
(with optional neck moulding)
(with optional neck moulding)
MAY 2014TUR-34
Colonial Wood RoundTapered Columns
Column shafts are constructed from fi nger-jointed pine staves, with a one year limited warranty if installed according to Turncraft's installation instructions. Other column sizes are available - please call for a quote.All exterior fi nger-joint Pine products manufactured by Turncraft are treated with Woodlife® 111 water repellent, which provides maximum protection against mold, mildew, staining and decaying fungi. This also increases dimensional stability and helps prevent shrinkage, swelling, and warping.
Factory applied priming and interior asphalt coating are available as added protection against moisture damage (see page TUR-45), and are required to maintain warranty.
Wood column shafts are shorter than column nominal height. Standard cap and base shipped are polyurethane; fi nger-joint pine and ornamental capitals are available options. The cap and base are load bearing and attach to the ends of the shaft, achieving the stated overall height.
All sizes of wood columns can be fl uted. Custom fl uting for your specifi c opening height is available at the standard fl uting price! Columns fl uted for use with ornamental caps will be fl uted based on the shaft being trimmed at the correct location.
Columns must be painted.
Decorative Capitals pricing and sizes - see pages TUR-36 & 37.
* Split columns ARE NOT LOAD BEARING. To split a BROSCO stock Wood Column $104.00** Load capacities are reduced when loads are not centered.
Personalize your columns with elegance – Ornamental capitals are available for all wood sizes.
Bottom Diameter x
Height
Complete ColumnShaft with Cap & Base
Shaft Only Cap & Base Set
(Stock #)
Load** Bearing
Capacity Lbs.
Split Shaft* Split Shaft*
Smooth FlutedSmooth(Stock #)
Fluted(Stock #)
Smooth (Stock #)
Fluted(Stock #)
6" x 6'0" $164.00 $207.00$125.00 $168.00 $39.00
2,095 $167.00 $210.00
1066 F1066 2506 1066S F1066S
6" x 8'0" 168.00 218.00 129.00 179.00 39.00 2,095
175.00 232.001068 F1068 2506 1068S F1068S
6" x 10'0" 233.00 313.00194.00 274.00 39.00
2,095 260.00 331.00
0610 F0610 2506 0610S F0610S
6" x 12'0" 291.00 363.00 252.00 324.00 39.00 2,095 326.00 417.00
0612 F0612 2506 0612S F0612S
8" x 6'0" 204.00 258.00157.00 211.00 47.00
3,258 210.00 266.00
1086 F1086 2508 1086S F1086S
8" x 8'0" 208.00 272.00 161.00 225.00 47.00 3,258
222.00 295.001088 F1088 2508 1088S F1088S
8" x 10'0" 257.00 330.00 210.00 283.00 47.00 3,258
274.00 371.000810 F0810 2508 0810S F0810S
8" x 12'0" 333.00 444.00 286.00 397.00 47.00 3,258 391.00 503.00
0812 F0812 2508 0812S F0812S
10" x 6'0" 270.00 329.00207.00 266.00 63.00
4,268 273.00 344.00
1106 F1106 2510 1106S F1106S
10" x 8'0" 273.00 344.00 210.00 281.00 63.00 4,268
274.00 372.001108 F1108 2510 1108S F1108S
10" x 10'0" 322.00 411.00259.00 348.00 63.00
4,268 340.00 462.00
1110 F1110 2510 1110S F1110S
10" x 12'0" 418.00 524.00355.00 461.00 63.00
4,268 450.00 598.001112 F1112 2510 1112S F1112S
Items priced in italics are factory order – please allow additional lead time. For product specifi cations visit www.turncraft.com.
Gray Box / Bold font = Stock
TUR-35 MAY 2014
Colonial Wood RoundTapered Columns
* Split columns ARE NOT LOAD BEARING. To split a BROSCO stock Wood Column $104.00 Plan Type A and D Only** Load capacities are reduced when loads are not centered.
Bottom Diameter x
Height
Complete ColumnShaft with Cap & Base
Shaft Only Cap & Base Set
(Stock #)
Load** Bearing
Capacity Lbs.
Split Shaft* Split Shaft*
Smooth FlutedSmooth(Stock #)
Fluted(Stock #)
Smooth (Stock #)
Fluted(Stock #)
12" x 6'0" $ 302.00 $ 397.00 $ 216.00 $311.00 $86.00 5,173 $292.00 $379.00
1126 F1126 2512 1126S F1126S
12" x 8'0" 329.00 434.00243.00 348.00 86.00
5,173 328.00 445.001128 F1128 2512 1128S F1128S
12" x 10'0" 394.00 517.00308.00 431.00 86.00
5,173 411.00 557.001210 F1210 2512 1210S F1210S
12" x 12'0" 546.00 707.00 460.00 621.00 86.00 5,173 607.00 787.00
1212 F1212 2512 1212S F1212S
12" x 14'0" 1,076.00 1,137.00 990.00 1,051.00 86.00 5,173 1,079.00 1,197.00
1214 F1214 2512 1214S F1214S
12" x 16'0" 1,165.00 1,225.00 1,079.00 1,139.00 86.00 5,173 1,179.00 1,302.001216 F1216 2512 1216S F1216S
14" x 6'0" 769.00 838.00 494.00 563.00 275.00 6,808 537.00 618.001406 F1406 2514 1406S F1406S
14" x 8'0" 902.00 969.00 627.00 694.00 275.00 6,808 670.00 751.001408 F1408 2514 1408S F1408S
14" x 10'0" 1,134.00 1,205.00 859.00 930.00 275.00 6,808 916.00 997.001410 F1410 2514 1410S F1410S
14" x 12'0" 1,265.00 1,377.00 990.00 1,102.00 275.00 6,808 1,053.00 1,190.001412 F1412 2514 1412S F1412S
14" x 14'0" 1,539.00 1,636.00 1,264.00 1,361.00 275.00 6,808 1,352.00 1,450.001414 F1414 2514 1414S F1414S
14" x 16'0" 1,640.00 1,737.00 1,365.00 1,462.00 275.00 6,808 1,466.00 1,640.001416 F1416 2514 1416S F1416S
Items priced in italics are factory order – please allow additional lead time. For product specifi cations visit www.turncraft.com.
Columns exceeding 14" diameter and/or 16'-0" length are shipped direct to dealer from factory AND will incur a freight charge, contact BROSCO for pricing. Direct ship product must accompany a BROSCO stock shipment.
Colonial Wood Round Tapered columns available up to 24" x 24'0", please inquire.
Cap & BaseColonial polyurethane cap and base are specially designed to provide increased durability. They are load bearing, and contain no wood components to warp, rot or decay.
Finger-Joint Pine cap and baseFor interior use only.
Split Plan Types DiagramSplit columns are not load bearing, even if reassembled.All pieces of split columns are shipped banded together for stability.Turncraft will split your wood columns in any of the following plan types:BROSCO wood stock columns are available split Plan D only, $104.00.
Column Size
Poly Set Price
SetStock #
CapPrice
CapStock #
BasePrice
BaseStock #
6" $ 39.00 2506 $ 18.00 2531 $ 21.00 2532
8" 47.00 2508 21.00 2533 26.00 2534
10" 63.00 2510 28.00 2535 34.00 2536
12" 86.00 2512 39.00 2537 47.00 2538
14" 275.00 2514 125.00 2539 153.00 2540
Column Size
Wood Set Price
SetStock #
CapPrice
CapStock #
BasePrice
BaseStock #
6" $ 47.00 2006 $ 23.00 8106 $ 26.00 8107
8" 57.00 2008 27.00 8108 31.00 8109
10" 76.00 2010 36.00 8110 41.00 8111
12" 104.00 2012 49.00 8112 56.00 8113
A
C★
Q★
B★
D
W★
Plan A is either unsplit, or split/spline for reassembly.
Plan B is one quarter cut out for a wall corner (ships with a plan Q at no charge).
Plan C is one quarter cut off for a pilaster.
Plan D is one column cut in half for two pilasters.
Plan Q is one quarter for an inside corner (shipped free with plan B).
Plan W is cut out for a wall wrap(please specify wall width when ordering).
★ Call for pricing.
Custom split plans are also available. Please specify your requirements. Turncraft will not split square Colonial (KD) columns.
Columns must be painted.
Gray Box / Bold font = Stock
MAY 2014TUR-36
Ornamental Capitals for Wood RoundTapered Colonial Columns
Column Size Price Item # Height Adjust Cap Height Abacus Width Scroll Width
6" $272.00 EM06 - 43/8" 21/2" 71/2" 63/4"
8" 280.00 EM08 - 31/8" 33/4" 10" 9"
10" 296.00 EM10 - 2" 51/4" 131/2" 121/4"
12" 472.00 EM12 - 1" 61/4" 18" 17"
14" 503.00 EM14 - 35/16" 61/4" 18" 17"
Column Size Price Item # Height Adjust Cap Height Abacus Width Scroll Width
6" $444.00 EN06 - 11/4" 5" 71/2" 63/4"
8" 552.00 EN08 11/2" 73/4" 10" 9"
10" 620.00 EN10 33/8" 10" 131/2" 121/4"
12" 779.00 EN12 43/8" 11" 18" 17"
14" 800.00 EN14 27/16" 11" 18" 17"
Column Size Price Item # Height Adjust Cap Height Abacus Width Scroll Width
6" $284.00 GA06 - 41/8" 23/4" 71/2" 63/4"
8" 308.00 GA08 - 31/4" 35/8" 91/4" 9"
10" 384.00 GA10 - 21/8" 51/8" 141/4" 133/4"
12" 524.00 GA12 - 11/4" 6" 171/4" 17"
14" 570.00 GA14 - 39/16" 6" 171/4" 17"
Column Size Price Item # Height Adjust Cap Height Abacus Width Scroll Width
6" $272.00 GE06 - 35/8" 31/4" 63/4" 81/2"
8" 296.00 GE08 - 31/8" 33/4" 73/4" 113/4"
10" 360.00 GE10 - 2" 51/4" 101/2" 15"
12" 500.00 GE12 - 1" 61/4" 141/2" 21"
14" 580.00 GE14 - 35/16" 61/4" 141/2" 21"
Column Size Price Item # Height Adjust Cap Height Abacus Width Scroll Width
8" $448.00 GN08 - 1/2" 53/4" 73/4" 113/4"
10" 532.00 GN10 7/8" 71/2" 101/2" 15"
12" 684.00 GN12 17/8" 81/2" 12" 171/4"
14" 772.00 GN14 15/16" 91/2" 141/2" 21"
Empire
Empire with Necking
Greek Angular Ionic
Greek Erectheum
Greek Erectheum w/Necking
Capitals for Colonial columns are LOAD-BEARING or ship with a load-bearing plug. These capitals are NOT for non-tapered shafts.If you need capitals for non tapered shafts, please contact BROSCO for available options.
The 'height adjustment' column is used to calculate overall height (OAH) of columns when using ornamental caps. Please adjust by the amount shown. For example, 8" x 96" shaft, add 3/4" (963/4" OAH) for Temple of Winds, or subtract 37/8" (921/8" OAH) for Scamozzi. This is assuming the installer trims the column shaft at the correct location on the astragal for architecturally correct installation - Ionic style capitals (Greek Erectheum, Roman Ionic, Scamozzi, Empire, Greek Angular Ionic) should be trimmed at the top fi llet, all others should be trimmed at the neck ring.
Sizes shown are estimates and subject to change without notice.
Items priced in italics are factory order – please allow additional lead time. For product specifi cations visit www.turncraft.com.
TUR-37MAY 2014
Ornamental Capitals for Wood RoundTapered Colonial Columns
Roman Ionic
Scamozzi
Temple of Winds
Roman Corinthian
Roman Doric Ornamental
Column Size Price Item # Height Adjust Cap Height Abacus Width Scroll Width
6" $388.00 MC06 1/4" 61/2" 71/2" N/A
8" 520.00 MC08 21/4" 81/2" 103/4" N/A
10" 576.00 MC10 47/8" 111/2" 161/2" N/A
12" 668.00 MC12 55/8" 121/4" 161/2" N/A
14" 938.00 MC14 515/16" 141/2" 19" N/A
Column Size Price Item # Height Adjust Cap Height Abacus Width Scroll Width
6" $339.00 RC06 - 1/2" 53/4" 8" N/A
8" 373.00 RC08 21/4" 81/2" 12" N/A
10" 407.00 RC10 43/8" 11" 13" N/A
12" 442.00 RC12 71/4" 137/8" 173/4" N/A
14" 529.00 RC14 515/16" 141/2" 181/2" N/A
Column Size Price Item # Height Adjust Cap Height Abacus Width Scroll Width
6" $261.00 RD06 -21/4" 4" 83/4" N/A
8" 313.00 RD08 -13/4" 41/2" 101/2" N/A
10" 384.00 RD10 - 5/8" 6" 141/4" N/A
12" 416.00 RD12 3/8" 7" 161/4" N/A
14" 452.00 RD14 - 1/16" 81/2" 173/4" N/A
Column Size Price Item # Height Adjust Cap Height Abacus Width Scroll Width
6" $221.00 RI06 - 45/8" 21/4" 61/8" 81/16"
8" 225.00 RI08 - 37/8" 3" 81/4" 101/2"
10" 241.00 RI10 - 35/8" 35/8" 101/2" 131/2"
12" 396.00 RI12 - 23/4" 41/2" 121/2" 161/2"
14" 495.00 RI14 - 51/16" 41/2" 121/2" 161/2"
Column Size Price Item # Height Adjust Cap Height Abacus Width Scroll Width
6" $237.00 SC06 - 43/8" 21/2" 61/2" 51/4"
8" 282.00 SC08 - 4" 27/8" 10" 8"
10" 377.00 SC10 - 33/4" 31/2" 11" 93/8"
12" 423.00 SC12 - 23/8" 47/8" 163/4" 14"
14" 520.00 SC14 - 49/16" 5" 171/2" 151/2"
Column Size Price Item # Height Adjust Cap Height Abacus Width Scroll Width
6" $237.00 TW06 - 1/4" 6" 6" NA
8" 241.00 TW08 3/4" 7" 8" NA
10" 320.00 TW10 33/8" 10" 137/8" NA
12" 446.00 TW12 5" 115/8" 167/8" NA
14" 524.00 TW14 5" 115/8" 167/8" NA
Modern Composite
Items priced in italics are factory order – please allow additional lead time. For product specifi cations visit www.turncraft.com.
MAY 2014TUR-38
Colonial Wood RoundNon-Tapered Columns
Column shafts are constructed from fi nger-jointed pine staves, with a one year limited warranty if installed according to Turncraft's installation instructions. Other column sizes are available - please call for a quote.
All exterior fi nger-joint Pine products manufactured by Turncraft are treated with Woodlife® 111 water repellant, which provides maximum protection against mold, mildew, staining and decaying fungi. This also increases dimensional stabilty and helps prevent shrinkage, swelling, and warping.
Factory applied priming and interior asphalt coating are available as added protection against moisture damage, (see page TUR-39) and required to maintain warranty.
Wood column shafts are shorter than column nominal height. Standard cap and base shipped are polyurethane; fi nger-joint pine are available as an option. The cap and base are load bearing and attach to the ends of the shaft, achieving the stated overall height.
All sizes of wood columns can be fl uted. Custom fl uting for your specifi c opening height is available at the standard fl uting price!
Columns must be painted.
Bottom Diameter x
Height
Complete ColumnShaft with Cap & Base
Shaft Only Cap & Base Set
(Stock #)
Load** Bearing
Capacity Lbs.
Split Shaft* Split Shaft*
Smooth FlutedSmooth(Stock #)
Fluted(Stock #)
Smooth (Stock #)
Fluted(Stock #)
6" x 6'0" $ 211.00 $ 257.00$ 169.00 $ 215.00 $ 42.00
2,095$210.00 $ 254.00
1066N F1066N 2532N 1066NS F1066NS
6" x 8'0" 236.00 295.00194.00 253.00 42.00
2,095247.00 305.00
1068N F1068N 2532N 1068NS F1068NS
6" x 10'0" 299.00 375.00257.00 333.00 42.00
2,095324.00 397.00
0610N F0610N 2532N 0610NS F0610NS
8" x 6'0" 254.00 314.00202.00 262.00 52.00
3,258256.00 314.00
1086N F1086N 2534N 1086NS F1086NS
8" x 8'0" 283.00 361.00231.00 309.00 52.00
3,258302.00 378.00
1088N F1088N 2534N 1088NS F1088NS
8" x 10'0" 352.00 451.00300.00 399.00 52.00
3,258389.00 484.00
0810N F0810N 2534N 0810NS F0810NS
10" x 6'0" 319.00 395.00251.00 327.00 68.00
4,268319.00 391.00
1106N F1106N 2536N 1106NS F1106NS
10" x 8'0" 356.00 454.00288.00 386.00 68.00
4,268376.00 471.00
1108N F1108N 2536N 1108NS F1108NS
10" x 10'0" 444.00 567.00376.00 499.00 68.00
4,268487.00 606.00
1110N F1110N 2536N 1110NS F1110NS
10" x 12'0" 572.00 723.00504.00 655.00 68.00
4,268638.00 783.00
1112N F1112N 2536N 1112NS F1112NS
12" x 8'0" 437.00 555.00343.00 461.00 94.00
5,173449.00 563.00
1128N F1128N 2538N 1128NS F1128NS
12" x 10'0" 597.00 698.00503.00 604.00 94.00
5,173650.00 730.00
1210N F1210N 2538N 1210NS F1210NS
12" x 12'0" 729.00 911.00635.00 817.00 94.00
5,173781.00 971.00
1212N F1212N 2538N 1212NS F1212NS
12" x 16'0" 1,610.00 1,749.001,516.00 1,655.00 94.00
5,1731,602.00 1,746.00
1216N F1216N 2538N 1216NS F1216NS
14" x 8'0" 1,096.00 1,220.00790.00 914.00 306.00
6,808876.00 1,005.00
1408N F1408N 2540N 1408NS F1408NS
14" x 10'0" 1,419.00 1,559.001,113.00 1,253.00 306.00
6,8081,199.00 1,343.00
1410N F1410N 2540N 1410NS F1410NS
14" x 12'0" 1,471.00 1,614.001,165.00 1,308.00 306.00
6,8081,251.00 1,399.00
1412N F1412N 2540N 1412NS F1412NS
14" x 14'0" 1,659.00 1,828.001,353.00 1,522.00 306.00
6,8081,439.00 1,613.00
1414N F1414N 2540N 1414NS F1414NS
14" x 16'0" 1,900.00 2,081.001,594.00 1,775.00 306.00
6,8081,680.00 1,866.00
1416N F1416N 2540N 1416NS F1416NS
* Split columns ARE NOT LOAD BEARING. ** Load capacities are reduced when loads are not centered.
Colonial Wood Round Non-Tapered columns available up to 20" x 20'0", please inquire.
TUR-39 MAY 2014
Items priced in italics are factory order – please allow additional lead time. For product specifi cations visit www.turncraft.com.
Columns exceeding 14" diameter and/or 16'-0" length are shipped direct to dealer from factory AND will incur a freight charge, contact BROSCO for pricing. Direct ship product must accompany a BROSCO stock shipment.
Colonial Wood RoundNon-Tapered Columns
Cap & BaseColonial polyurethane cap and base are specially designed to provide increased durability. They are load bearing, and contain no wood components to warp, rot or decay. Since the non-tapered shafts require a cap the same diameter as the base, Non-Tapered sets are two bases.
Priming and AsphaltingPriming is applied in two coats, using a specially formulated primer developed exclusively for Turncraft. The column is sanded before each coat. Asphalt coating of the shaft interior is applied on the bottom three feet of the shaft. Required to maintain warranty.
Column Size Set Price Set Stock #
6" $ 42.00 2532N
8" 52.00 2534N
10" 68.00 2536N
12" 94.00 2538N
14" 306.00 2540N
Nominal Size RangePrice for
Factory PrimingPrice for Factory Asphalt Coating
6" x 6'0" to 6" x 12'0" $ 69.00 $ 52.00
8" x 6'0" to 8" x 12'0" 86.00 69.00
10" x 6'0" to 10" x 12'0" 103.00 80.00
12" x 6'0" to 12" x 10'0" 120.00 87.00
12" x 12'0" to 12" x 20'0" 137.00 94.00
14" x 6'0" to 14" x 12'0" 171.00 103.00
14" x 14'0" to 14" x 20'0" 205.00 123.00
Finger-Joint Pine cap and baseFor interior use only.
Column Size Set Price Base Stock #
6" $ 51.00 8107N
8" 62.00 8109N
10" 82.00 8111N
12" 113.00 8113N
MAY 2014TUR-40
Traditional Hardwood ColumnsFOR INTERIOR USE ONLY
Bottom Diameter x
Height
Complete ColumnShaft with Cap & Base
Shaft Only Cap & Base Set
(Stock #)
Split Shaft* Split Shaft* Load** Bearing Capacity
Lbs.Smooth Fluted
Smooth(Stock #)
Fluted(Stock #)
Smooth(Stock #)
Fluted(Stock #)
6" x 4'0" $ 536.00 $ 601.00$ 400.00 $ 465.00 $136.00 $ 445.00 $ 510.00
4,238O1064 O1064F OTR06 O1064S O1064FS
6" x 6'0" 677.00 812.00541.00 676.00 136.00 586.00 721.00
4,238O1066 O1066F OTR06 O1066S O1066FS
6" x 8'0" 902.00 1,038.00 766.00 902.00 136.00 812.00 947.00 4,238O1068 O1068F OTR06 O1068S O1068FS
8" x 6'0" 878.00 1,053.00699.00 874.00 179.00 744.00 919.00
5,951O1086 O1086F OTR08 O1086S O1086FS
8" x 8'0" 1,083.00 1,246.00904.00 1,067.00 179.00 950.00 1,112.00
5,951O1088 O1088F OTR08 O1088S O1088FS
8" x 10'0" 1,246.00 1,433.00 1,067.00 1,254.00 179.00 1,127.00 1,314.00 5,951O0810 O0810F OTR08 O0810S O0810FS
10" x 8'0" 1,334.00 1,535.001,076.00 1,277.00 258.00 1,122.00 1,322.00
8,371O1108 O1108F OTR10 O1108S O1108FS
10" x 10'0" 1,557.00 1,790.001,299.00 1,532.00 258.00 1,359.00 1,593.00
8,371O1110 O1110F OTR10 O1110S O1110FS
10" x 12'0" 1,868.00 2,148.00 1,610.00 1,890.00 258.00 1,676.00 1,956.00 8,371O1112 O1112F OTR10 O1112S O1112FS
12" x 8'0" 1,535.00 1,765.001,183.00 1,413.00 352.00 1,228.00 1,458.00
10,113O1128 O1128F OTR12 O1128S O1128FS
12" x 10'0" 1,918.00 2,206.001,566.00 1,854.00 352.00 1,626.00 1,914.00
10,113O1210 O1210F OTR12 O1210S O1210FS
12" x 12'0" 2,210.00 2,542.00 1,858.00 2,190.00 352.00 1,924.00 2,256.00 10,113O1212 O1212F OTR12 O1212S O1212FS
Bottom Diameter x
Height
Complete ColumnShaft with Cap & Base
Shaft Only Cap & Base Set
(Stock #)
Split Shaft* Split Shaft* Load** Bearing Capacity
Lbs.Smooth Fluted
Smooth(Stock #)
Fluted(Stock #)
Smooth(Stock #)
Fluted(Stock #)
6" x 4'0" $ 825.00 $ 990.00$ 598.00 $ 763.00 $227.00 $ 643.00 $ 808.00
3,578C1064 C1064F CTR06 C1064S C1064FS
6" x 6'0" 1,083.00 1,246.00856.00 1,019.00 227.00 901.00 1,064.00
3,578C1066 C1066F CTR06 C1066S C1066FS
6" x 8'0" 1,444.00 1,590.00 1,217.00 1,363.00 227.00 1,263.00 1,408.00 3,578C1068 C1068F CTR06 C1068S C1068FS
8" x 6'0" 1,484.00 1,632.001,132.00 1,280.00 352.00 1,177.00 1,325.00
4,088C1086 C1086F CTR08 C1086S C1086FS
8" x 8'0" 1,781.00 1,959.001,429.00 1,607.00 352.00 1,474.00 1,652.00
4,088C1088 C1088F CTR08 C1088S C1088FS
8" x 10'0" 2,124.00 2,448.00 1,772.00 2,096.00 352.00 1,832.00 2,157.00 4,088C0810 C0810F CTR08 C0810S C0810FS
10" x 8'0" 2,237.00 2,460.001,715.00 1,938.00 522.00 1,760.00 1,983.00
6,811C1108 C1108F CTR10 C1108S C1108FS
10" x 10'0" 2,782.00 3,060.002,260.00 2,538.00 522.00 2,320.00 2,598.00
6,811C1110 C1110F CTR10 C1110S C1110FS
10" x 12'0" 3,338.00 3,672.00 2,816.00 3,150.00 522.00 2,882.00 3,216.00 6,811C1112 C1112F CTR10 C1112S C1112FS
12" x 8'0" 2,523.00 2,775.001,898.00 2,150.00 625.00 1,943.00 2,195.00
8,069C1128 C1128F CTR12 C1128S C1128FS
12" x 10'0" 3,154.00 3,469.002,529.00 2,844.00 625.00 2,589.00 2,904.00
8,069C1210 C1210F CTR12 C1210S C1210FS
12" x 12'0" 3,784.00 4,163.00 3,159.00 3,538.00 625.00 3,225.00 3,604.00 8,069C1212 C1212F CTR12 C1212s C1212FS
RED OAK
CHERRY
Incorporating the design characteristics and quality manufacturing you've come to expect from Turncraft Architectural, the new Traditional column line offers more home owners the classic beauty of hardwood columns. FOR INTERIOR USE ONLY!
Available both smooth and fl uted, these stylistic columns are made from Turncraft's four most popular hardwood species. Featuring an architectural entasis, the bottom 1/3 of the shaft is straight, allowing for fi eld trimming. Net shaft diameters are 3/8" less than nominal. On fl uted columns, the fl utes end 1" from the astragal and 7" from the top of the base - fl uted columns can be trimmed up to 6". Custom fl uting for an exact opening height (fl utes ending 1" above base) is available, call for price. Cap and base not available separately.
Items priced in italics are factory order – please allow additional lead time. For product specifi cations visit www.turncraft.com.
TUR-41 MAY 2014
Traditional Hardwood ColumnsFOR INTERIOR USE ONLY
Bottom Diameter x
Height
Complete ColumnShaft with Cap & Base
Shaft Only Cap & Base Set
(Stock #)
Split Shaft* Split Shaft* Load** Bearing Capacity
Lbs.Smooth Fluted
Smooth(Stock #)
Fluted(Stock #)
Smooth(Stock #)
Fluted(Stock #)
6" x 4'0" $ 695.00 $ 834.00$ 468.00 $ 607.00 $227.00 $ 513.00 $ 652.00
3,317H1064 H1064F HTR06 H1064S H1064FS
6" x 6'0" 869.00 999.00642.00 772.00 227.00 687.00 817.00
3,317H1066 H1066F HTR06 H1066S H1066FS
6" x 8'0" 1,128.00 1,298.00 901.00 1,071.00 227.00 946.00 1,116.00 3,317H1068 H1068F HTR06 H1068S H1068FS
8" x 6'0" 1,115.00 1,282.00842.00 1,009.00 273.00 887.00 1,054.00
4,689H1086 H1086F HTR08 H1086S H1086FS
8" x 8'0" 1,390.00 1,557.001,117.00 1,284.00 273.00 1,163.00 1,329.00
4,689H1088 H1088F HTR08 H1088S H1088FS
8" x 10'0" 1,738.00 1,912.00 1,465.00 1,639.00 273.00 1,525.00 1,699.00 4,689H0810 H0810F HTR08 H0810S H0810FSS
10" x 8'0" 1,815.00 2,032.001,423.00 1,640.00 392.00 1,468.00 1,686.00
6,247H1108 H1108F HTR10 H1108S H1108FS
10" x 10'0" 2,172.00 2,389.001,780.00 1,997.00 392.00 1,840.00 2,057.00
6,247H1110 H1110F HTR10 H1110S H1110FS
10" x 12'0" 2,606.00 2,867.00 2,214.00 2,475.00 392.00 2,280.00 2,541.00 6,247H1112 H1112F HTR10 H1112S H1112FS
12" x 8'0" 1,969.00 2,264.001,458.00 1,753.00 511.00 1,548.00 1,843.00
7,400H1128 H1128F HTR12 H1128S H1128FS
12" x 10'0" 2,461.00 2,757.001,950.00 2,246.00 511.00 2,040.00 2,336.00
7,400H1210 H1210F HTR12 H1210S H1210FS
12" x 12'0" 2,964.00 3,320.00 2,453.00 2,809.00 511.00 2,543.00 2,899.00 7,400H1212 H1212F HTR12 H1212S H1212FS
Bottom Diameter x
Height
Complete ColumnShaft with Cap & Base
Shaft Only Cap & Base Set
(Stock #)
Split Shaft* Split Shaft* Load** Bearing Capacity
Lbs.Smooth Fluted
Smooth(Stock #)
Fluted(Stock #)
Smooth(Stock #)
Fluted(Stock #)
6" x 4'0" $ 689.00 $ 838.00$ 462.00 $ 611.00 $227.00 $ 516.00 $ 656.00
3,366M1064 M1064F MTR06 M1064S M1064FS
6" x 6'0" 873.00 1,004.00646.00 777.00 227.00 691.00 822.00
3,366M1066 M1066F MTR06 M1066S M1066FS
6" x 8'0" 1,164.00 1,338.00 937.00 1,111.00 227.00 982.00 1,157.00 3,366M1068 M1068F MTR06 M1068S M1068FS
8" x 6'0" 1,153.00 1,326.00880.00 1,053.00 273.00 925.00 1,098.00
4,780M1086 M1086F MTR08 M1086S M1086FS
8" x 8'0" 1,397.00 1,607.001,124.00 1,334.00 273.00 1,169.00 1,379.00
4,780M1088 M1088F MTR08 M1088S M1088FS
8" x 10'0" 1,746.00 1,956.00 1,473.00 1,683.00 273.00 1,522.00 1,743.00 4,780M0810 M0810F MTR08 M0810S M0810FS
10" x 8'0" 1,886.00 2,168.001,494.00 1,776.00 392.00 1,539.00 1,822.00
6,380M1108 M1108F MTR10 M1108S M1108FS
10" x 10'0" 2,183.00 2,444.001,791.00 2,052.00 392.00 1,851.00 2,112.00
6,380M1110 M1110F MTR10 M1110S M1110FS
10" x 12'0" 2,619.00 2,933.00 2,227.00 2,541.00 392.00 2,293.00 2,607.00 6,380M1112 M1112F MTR10 M1112S M1112FS
12" x 8'0" 2,095.00 2,409.001,584.00 1,898.00 511.00 1,674.00 1,989.00
7,560M1128 M1128F MTR12 M1128S M1128FS
12" x 10'0" 2,619.00 2,933.002,108.00 2,422.00 511.00 2,198.00 2,512.00
7,560M1210 M1210F MTR12 M1210S M1210FS
12" x 12'0" 3,142.00 3,520.00 2,631.00 3,009.00 511.00 2,722.00 3,099.00 7,560M1212 M1212F MTR12 M1212S M1212FS
HARD MAPLE
AFRICAN MAHOGANY
*Split columns are NOT LOAD BEARING. See page TUR-35 for split plan types available.
MAY 2014TUR-42
• Poly-Classic Porch Posts are constructed from seamless window grade vinyl with UV inhibitor.
• Posts come in a matte white fi nish but can be painted to match your project.
• Standard mounting brackets and installation instructions are packaged with the post.
• Structural galvanized steel square core with sturdy inserts at the critical connection points.
• Covered by a limited lifetime warranty.
• Posts must be painted.
Optional Uplift brackets are available with a 1500 lb uplift load rating.Please check local code requirements to determine applicability.
Poly-Classic ColonialPoly Porch Post
Size(Nominal) ★
Price Stock #Base
HeightLoad Bearing
Capacity
5" x 8'0" $173.00 73941 421/8" 3,000
5" x 9'0" 189.00 74487 421/8" 3,000
Price Stock #
$17.00 07252
Price Stock # Description
$5.00 71870 Rail to Post Kit - Bracket w/2 Screws
Uplift Mounting Hardware
Rail to Post Kit
Standard Installation Bracket
NOTES: ★ Net width is 4-1/4". Turned portion is 387/8". For product specifi cations visit www.turncraft.com.
Gray Box / Bold font = Stock
Post Size Price Stock #Trim
WidthTrim
Height
4" $27.00 PW04 45/8" 3"
5" 34.00 PW05 55/8" 3"
6" 41.00 PW06 65/8" 3"
Size Price Stock #
4" $10.00 A2101
5" 10.00 A2102
6" 11.00 A2103
Turncraft requires the use of Post Saver mounting blocks or other Elevated Platform for warranty coverage on wood porch posts.
Post Trim KitThe PVC Porch Post Trim Kit is designed to wrap around the porch post and mounting (Quick-mount or Elevated Platform) for a fi nished look. Each kit contains 2 wraps - one for the top and one for the bottom, or the bottom only of two posts. Can be used with Poly-Classic Posts as well as wood. Ships fl at with only one seam to fi nish - wrap around the post, apply glue to the edge, and pin-nail joint. Apply caulk, touch-up and paint (post must be painted prior to installation).
New! Post Saver™ Mounting Blocks
Designed and engineered to work perfectly with Turncraft's Post Defense™ wood porch posts.
TUR-43 MAY 2014
PRIMED POST DEFENSE PORCH POSTSColonial / Chamfered / Square
D8258AC D8259AC D8375AC D8248A D8249A D8370AD8268AC D8269AC D8380AC D8258A D8259A D8375A
D8268A D8269A D8380A
14"
24"
14"
40"40"
40"
44"56"
42"
Chamfered Porch Posts
Size* Price Stock #Base
HeightLoad
Capacity Lbs.5" x 8'0" $130.00 D8258AC 42" 3,0005" x 9'0" 145.00 D8259AC 44" 3,0005" x 10'0" 159.00 D8375AC 56" 3,000
6" x 8'0" 168.00 D8268AC 42" 5,8006" x 9'0" 180.00 D8269AC 44" 5,8006" x 10'0" 188.00 D8380AC 56" 5,800
Square Porch Posts
Size* Price Stock #Base
HeightLoad
Capacity Lbs.4" x 8'0" $ 77.00 D8248A N/A 1,0004" x 9'0" 86.00 D8249A N/A 1,0004" x 10'0" 97.00 D8370A N/A 1,000
5" x 8'0" 113.00 D8258A N/A 3,0005" x 9'0" 128.00 D8259A N/A 3,0005" x 10'0" 142.00 D8375A N/A 3,000
6" x 8'0" 144.00 D8268A N/A 5,8006" x 9'0" 164.00 D8269A N/A 5,8006" x 10'0" 179.00 D8380A N/A 5,800
Items priced in italics are factory order – please allow additional lead time. For product specifi cations visit www.turncraft.com.
Gray Box / Bold font = Stock
Porch posts are turned from fi nger-jointed, kiln-dried western wood species. All turned surfaces are factory sanded.
Since moisture is one of the primary problems in fungal wood decay, Post Defense posts are factory sealed on the bottom end. The bottom end must never be trimmed for installation to ensure warranty coverage. This sealer provides an effective method of controlling moisture and inhibiting the growth of fungal decay. 100% Acrylic Primer is applied, adding to this prevention and control of moisture and fungal decay. Quick-Mount™ or other elevated platform are required on each post for warranty coverage. This 10-year limited warranty is only available in the continental USA. Posts must be painted.
D3148A D3049A D3410AD3158A D3059A D3510AD3168A D3069A D3610A
14"
24"
24"
40" 40"
40"
42"44"
56"
Colonial Porch Posts (Includes Post Saver™ Mounting Block)
Size* Price Stock #Base
HeightLoad
Capacity Lbs.
4" x 8'0" $ 77.00 D3148A 42" 1,000
4" x 9'0" 88.00 D3049A 44" 1,000
4" x 10'0" 114.00 D3410A 56" 1,000
5" x 8'0" 95.00 D3158A 42" 3,000
5" x 9'0" 115.00 D3059A 44" 3,000
5" x 10'0" 140.00 D3510A 56" 3,000
6" x 8'0" 128.00 D3168A 42" 5,800
6" x 9'0" 137.00 D3069A 44" 5,800
6" x 10'0" 177.00 D3610A 56" 5,800
*Net width is 3/4" less than nominal. Inside width of 5" post is 13/4", inside width of 6" post is 23/8".
To split a BROSCO stock Porch Post $71.00.
MAY 2014TUR-44
TURNCRAFT Architectural ColumnQuote Request
Date: ____________________
Dealer Name: _________________________________________________________________
Phone: ____________________________________ Fax: ___________________________
Contact: ______________________________________________________________________
Job Name:____________________________________________________________________
Special Notes: ________________________________________________________________
______________________________________________________________________________
Styles: Plan Type:
Quantity Column StylePlan Type
Bottom Diameter
Top Diameter
TotalLength
FlutingTaper orNo Taper
Capital Base SplittingCustomService
WoodSpecies
Production Time: ________________________________ Freight Allowance: ______________________________
Factory order items – please allow additional lead time. Quote Form available on-line at www.brosco.com