table of contentsclientele.k2velosi.com/clientweb/inspectionreports/sapurakencana... · based on...
TRANSCRIPT
Singapore
T +65 6545 7646E [email protected]
Korea
T +82 55 688 1974E [email protected]
Brazil
T +55 22 2773 2211E [email protected]
USA
T +1 281 872 3600E [email protected]
K2 Specialist Services Pte. Ltd.
Structural Design & Engineering | Derrick Assembly | FPSO IRM | Rig IRM | Training
Unit 5E Excel Building | 521 Bukit Batok Street 23 | Singapore 659544 tel (65) 6545 7646 | fax (65) 6545 7138 | email [email protected] | website www.k2velosi.com Co. Registration No: 199708215 R
TABLE OF CONTENT
1.0: Introduction
1.1 Work Brief 1.2 General Arrangement and Reference 1.3 Executive Summary
2.0: Reports
2.1 : PRV Calibration List 2.2 : Certificate of PRV Calibration 2.3 : Failed PRV Calibration Report 3.0: Personnel &Equipment Certificates
Prepared by Checked by Approved by
Name Shahrublbahtiar Bin Abd Hak
Veronica Felipe Ben Rogers/ Halifie Bin Rahmad
Signature
Date 25-Mar-2014 01-Apr-2014 01-Apr-2014 Report Revision Status
Revision No Description Date Of Submission
00 Final Report 01-Apr-2014
K2 Specialist Services Pte. Ltd.
Structural Design & Engineering | Derrick Assembly | FPSO IRM | Rig IRM | Training
Unit 5E Excel Building | 521 Bukit Batok Street 23 | Singapore 659544 tel (65) 6545 7646 | fax (65) 6545 7138 | email [email protected] | website www.k2velosi.com Co. Registration No: 199708215 R
1.0: Introduction
K2 Specialist Services Pte. Ltd.
Structural Design & Engineering | Derrick Assembly | FPSO IRM | Rig IRM | Training
Unit 5E Excel Building | 521 Bukit Batok Street 23 | Singapore 659544 tel (65) 6545 7646 | fax (65) 6545 7138 | email [email protected] | website www.k2velosi.com Co. Registration No: 199708215 R
1.0 Introduction
1.1 Works Brief K2 Specialist Services Pte Ltd has been engaged to perform survey of pressure relief valves testing and calibration for SapuraKencana, onboard SKD T-15 drilling rig whilst she was at Nakhon, Thailand, from the period of 8th ~ 24th March, 2014. The Client provided assistance on the removal and installation of all pressure relief valves. During the process of calibration, some process lines were easy to take out the valve for calibration because of being not in service while bypass line was made in operation if main active line valve needs to be taken out for calibration. Further details of the inspection are mentioned in the Executive summary. K2 provided online database of calibrated PRV’s documentations which can be accessed by the client within a mouse click. Custom made database of the PRV inventory and corresponding certificates are enclosed with this report as well. K2 Specialist Services Pte Ltd acknowledges the help given and wishes to thank the personnel of SKD T-15 rig who assisted us during the course of the project.
1.2 General Arrangement & Reference K2 specialists brought their calibration equipment onboard to complete the inspection / recalibration of pressure gauges. The equipment arrived on board in our portable container which includes testing pump, calibration master gauge, selection of fittings and consumables. The rig was located offshore in Nakhon Si Thammarat, Thailand. And we were ordered to perform calibration of in-service & warehouse spare pressure relief valves. This form of arrangement saves time comparing to sending the inspected equipment onshore to a calibration laboratory for inspection / recalibration. In addition, it cuts costs of transporting and waiting time on receiving end. K2 Specialists had carried out testing and calibration of Pressure relief valves & Pressure gauge in accordance with the procedures K2-IMSW-105 and K2-IMSW-106 respectively, based on international standards ASME Code, API RP 576 and ISO-7500 Part-1 respectively. All calibrated Pressure relief valves & Pressure gauge were marked with a unique identification number for future traceability and photos were taken for the all rejected Pressure relief valves to provide a quick reference in the reporting where applicable.
K2 Specialist Services Pte. Ltd.
Structural Design & Engineering | Derrick Assembly | FPSO IRM | Rig IRM | Training
Unit 5E Excel Building | 521 Bukit Batok Street 23 | Singapore 659544 tel (65) 6545 7646 | fax (65) 6545 7138 | email [email protected] | website www.k2velosi.com Co. Registration No: 199708215 R
1.3 Executive Summary Most valves were found to be set at the correct pressure; a few had to be stripped down for repair or adjustment. After reassembly, these valves were tested and were found to be acceptable & within tolerance range. They were all then marked, sealed and certified accordingly. Relief valves from the following systems were inspected and calibrated within tolerance. Spare Valve (Warehouse) Cement Tank Oil Separator Air Compressor Air Dryer Water Maker Emergency Air Compressor Tender Emergency Air Tank Dust Collector Port Crane PC300 Aviation Heli Refueling Tank Mud Pump Stbd Crane Air Tank Barite Tank HP wash down Refrigeration Compressor Koomey Unit Hot Water Portable Tank VFD Condenser Cold Water portable Tank Main Air Tank Air Receiver Tank Anchor Winch Mixing Hooper Low Pressure Air Initial visual inspection and testing of these valves revealed that some of them to be not lifting at correct set pressure or found to be leaking excessively. During our inspection, these valves were rectified and being entered back into service as per normal. Two valves were rejected out of total 70 Pressure relief valves inspected. We strongly recommend that to avoid failure, choke or out-of-setting, these Pressure Relief Valves needs to have spares for every unit and for standby purposes.
*******************************************
K2 Specialist Services Pte. Ltd.
Structural Design & Engineering | Derrick Assembly | FPSO IRM | Rig IRM | Training
Unit 5E Excel Building | 521 Bukit Batok Street 23 | Singapore 659544 tel (65) 6545 7646 | fax (65) 6545 7138 | email [email protected] | website www.k2velosi.com Co. Registration No: 199708215 R
2.0: Reports
K2 Specialist Services Pte. Ltd.
Structural Design & Engineering | Derrick Assembly | FPSO IRM | Rig IRM | Training
Unit 5E Excel Building | 521 Bukit Batok Street 23 | Singapore 659544 tel (65) 6545 7646 | fax (65) 6545 7138 | email [email protected] | website www.k2velosi.com Co. Registration No: 199708215 R
2.1 : PRV Calibration List
SKD T-15 - Pressure Relief Valves Calibration List
Project No. PRV ID Equipment Ref Serial No. Manufacturer Set Pressure Size In Model/Type Certificate
No.
Date Tested Date Next
Due
Test Temp Result Inspector Supervisor Test Equipment
Serial No.
Test Equipment Re-
Calibration Date
Photo 1 Photo 2 Notes on the ValveMaterial Body
2014-121 PRV001 Spare No.1 (Warehouse) No serial
number marked
on the PRV
KUNKLE 70 PSI '2" NPT M' 912BJHM01-JE 2014-
121/PRV001
10-Mar-
2014
10-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Unit existing use on Mud Pump
No.3.Test & Pass.
Aiman Husin Shahrulbahtiar HakBronze
2014-121 PRV002 Spare No.2 (Warehouse) No serial
number marked
on the PRV
KUNKLE 70 PSI '2" NPT M' 912BJHM01-JE 2014-
121/PRV002
10-Mar-
2014
10-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Unit existing use on Mud Pump
No.2.Test & Pass.
Aiman Husin Shahrulbahtiar HakBronze
2014-121 PRV003 Spare No.3 (Warehouse) I-20509 KUNKLE 70 PSI '2" NPT M' 912BJHM01-JE 2014-
121/PRV003
10-Mar-
2014
10-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Unit existing use on Mud Pump
No.1.Test & Pass.
Aiman Husin Shahrulbahtiar HakBronze
2014-121 PRV004 Cement Tank No. 3 PSV-009 H&L 62.5 PSI '2" Flange' SV01 2014-
121/PRV004
10-Mar-
2014
10-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakStainless
2014-121 PRV005 Cement Tank No. 1 PSV-003 H&L 62.5 PSI '2" Flange' SV01 2014-
121/PRV005
10-Mar-
2014
10-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakStainless
2014-121 PRV006 Cement Tank No. 2 PSV-007 H&L 62.5 PSI '2" Flange' SV01 2014-
121/PRV006
10-Mar-
2014
10-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakStainless
2014-121 PRV007 Cement Tank No. 4 PSV-008 H&L 62.5 PSI '2" Flange' SV01 2014-
121/PRV007
10-Mar-
2014
10-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakStainless
2014-121 PRV008 Oil Separator Air Compressor D
(engine Room)
OG8703.5C NBR 175 PSI '1 1/4" NPT M' SW12 2014-
121/PRV008
11-Mar-
2014
11-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakBronze
2014-121 PRV009 Air Dryer No 4B 107772912-1 TUV 10.5 BAR '1" BSP M' 10-2055.20 2014-
121/PRV009
11-Mar-
2014
11-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakBronze
2014-121 PRV010 Air Dryer No 4A 107772912-2 TUV 10.5 BAR '1" BSP M' 10-2055.20 2014-
121/PRV010
11-Mar-
2014
11-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakBronze
Page 1 of 7
● Singapore - K2 Specialist Services Pte Ltd, 521 Bukit Batok St 23, Unit 5E Excel Building, Singapore 659544, Tel: +65 6545 7646, Fax: +65 6545 7138
● Korea - K2 Specialist Services Pte Ltd, Level 2, 553-33, Okpo-1dong, Geoje-Si, Gyeongnam, South Korea 656-904, Tel: +82 55 688 1974, Fax: +82 55 688 1925
● Brasil - K2 do Brasil Serviços Ltda, Avenida Nossa Senhora da Glória, n° 2427 - sala 01, Cavaleiros, Macaé, RJ, Brasil CEP 27920-360, Tel: +55 22 2773 2211
● USA - K2 International, 222 Pennbright Dr., Suite 230, Houston TX 77090, U.S.A., Tel: +1 281 872 3600
SKD T-15 - Pressure Relief Valves Calibration List
Project No. PRV ID Equipment Ref Serial No. Manufacturer Set Pressure Size In Model/Type Certificate
No.
Date Tested Date Next
Due
Test Temp Result Inspector Supervisor Test Equipment
Serial No.
Test Equipment Re-
Calibration Date
Photo 1 Photo 2 Notes on the ValveMaterial Body
2014-121 PRV011 Air Dryer No 1A 107772912-4 TUV 10.5 BAR '1" BSP M' 10-2055.20 2014-
121/PRV011
11-Mar-
2014
11-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakBronze
2014-121 PRV012 Air Dryer No 1B 107772912-3 TUV 10.5 BAR '1" BSP M' 10-2055.20 2014-
121/PRV012
11-Mar-
2014
11-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakBronze
2014-121 PRV013 Oil Separator Air Compressor A
(engine Room)
OG8703.5C NBR 175 PSI '1 1/4" NPT M' SW12 2014-
121/PRV013
11-Mar-
2014
11-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakBronze
2014-121 PRV014 Oil Separator Air Compressor B
(engine Room)
OG8703.5C NBR 175 PSI '1 1/4" NPT M' SW12 2014-
121/PRV014
11-Mar-
2014
11-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakBronze
2014-121 PRV015 Air Dryer No 2B 107772912-5 TUV 10.5 BAR '1" BSP M' 10-2055.20 2014-
121/PRV015
11-Mar-
2014
11-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakBronze
2014-121 PRV016 Air Dryer No 2A 107772912-6 TUV 10.5 BAR '1" BSP M' 10-2055.20 2014-
121/PRV016
11-Mar-
2014
11-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakBronze
2014-121 PRV017 Air Dryer No 3A 107772912-7 TUV 10.5 BAR '1" BSP M' 10-2055.20 2014-
121/PRV017
11-Mar-
2014
11-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakBronze
2014-121 PRV018 Air Dryer No 3B 107772912-8 TUV 10.5 BAR '1" BSP M' 10-2055.20 2014-
121/PRV018
11-Mar-
2014
11-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakBronze
2014-121 PRV019 Oil Separator Air Compressor C
(engine Room)
OG8703.5C NBR 175 PSI '1 1/4" NPT M' SW12 2014-
121/PRV019
11-Mar-
2014
11-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakBronze
2014-121 PRV020 Water maker (engine Room) 01072409 TUV 1 BAR '1" BSP M' 10-1090 2014-
121/PRV020
12-Mar-
2014
12-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakBronze
Page 2 of 7
● Singapore - K2 Specialist Services Pte Ltd, 521 Bukit Batok St 23, Unit 5E Excel Building, Singapore 659544, Tel: +65 6545 7646, Fax: +65 6545 7138
● Korea - K2 Specialist Services Pte Ltd, Level 2, 553-33, Okpo-1dong, Geoje-Si, Gyeongnam, South Korea 656-904, Tel: +82 55 688 1974, Fax: +82 55 688 1925
● Brasil - K2 do Brasil Serviços Ltda, Avenida Nossa Senhora da Glória, n° 2427 - sala 01, Cavaleiros, Macaé, RJ, Brasil CEP 27920-360, Tel: +55 22 2773 2211
● USA - K2 International, 222 Pennbright Dr., Suite 230, Houston TX 77090, U.S.A., Tel: +1 281 872 3600
SKD T-15 - Pressure Relief Valves Calibration List
Project No. PRV ID Equipment Ref Serial No. Manufacturer Set Pressure Size In Model/Type Certificate
No.
Date Tested Date Next
Due
Test Temp Result Inspector Supervisor Test Equipment
Serial No.
Test Equipment Re-
Calibration Date
Photo 1 Photo 2 Notes on the ValveMaterial Body
2014-121 PRV021 Water maker filter No.1
(engine Room)
No serial
number marked
on the PRV
DN15 4 BAR '1/2" NPT M' ZJP090616127 2014-
121/PRV021
12-Mar-
2014
12-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakBronze
2014-121 PRV022 Water maker filter No.2
(engine Room)
No serial
number marked
on the PRV
DN15 4 BAR '1/2" NPT M' ZJP090616127 2014-
121/PRV022
12-Mar-
2014
12-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakBronze
2014-121 PRV023 Emergency Compressor High
Side
108052912 TUV 20.7 BAR '1/4" NPT M' 10-2055.7 2014-
121/PRV023
12-Mar-
2014
12-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakBronze
2014-121 PRV024 Emergency Compressor Low
Side
107932912 TUV 20.7 BAR '1/4" NPT M' 10-2055.7 2014-
121/PRV024
12-Mar-
2014
12-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakBronze
2014-121 PRV025 Emergency Compressor Low
Side
107942912 TUV 20.7 BAR '1/4" NPT M' 10-2055.7 2014-
121/PRV025
12-Mar-
2014
12-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakBronze
2014-121 PRV026 Tender Emergency Air Tank 108102912 TUV 14.3 BAR '3/4" NPT M' 10-2055.16 2014-
121/PRV026
12-Mar-
2014
12-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakBronze
2014-121 PRV027 Sack Room Dust Collector Left
Aft
750408 MERCER 72 PSI '2" NPT M' KN-2GX1U1 2014-
121/PRV027
13-Mar-
2014
13-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakStainless
2014-121 PRV028 Sack Room Dust Collector Right
Aft
750407 MERCER 72 PSI '2" NPT M' KN-2GX1U1 2014-
121/PRV028
13-Mar-
2014
13-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakStainless
2014-121 PRV029 Oily Water Separator No.1
(Mud Pump Room)
CR08C Durgo 60 PSI '1" BSP M' V50 2014-
121/PRV029
13-Mar-
2014
13-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakBronze
2014-121 PRV030 Oily Water Separator No.2
(Mud Pump Room)
1761805-01 MEDANA & VISCA 6 BAR '3/4" NPT M' LOTTO 2 2014-
121/PRV030
13-Mar-
2014
13-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakBronze
Page 3 of 7
● Singapore - K2 Specialist Services Pte Ltd, 521 Bukit Batok St 23, Unit 5E Excel Building, Singapore 659544, Tel: +65 6545 7646, Fax: +65 6545 7138
● Korea - K2 Specialist Services Pte Ltd, Level 2, 553-33, Okpo-1dong, Geoje-Si, Gyeongnam, South Korea 656-904, Tel: +82 55 688 1974, Fax: +82 55 688 1925
● Brasil - K2 do Brasil Serviços Ltda, Avenida Nossa Senhora da Glória, n° 2427 - sala 01, Cavaleiros, Macaé, RJ, Brasil CEP 27920-360, Tel: +55 22 2773 2211
● USA - K2 International, 222 Pennbright Dr., Suite 230, Houston TX 77090, U.S.A., Tel: +1 281 872 3600
SKD T-15 - Pressure Relief Valves Calibration List
Project No. PRV ID Equipment Ref Serial No. Manufacturer Set Pressure Size In Model/Type Certificate
No.
Date Tested Date Next
Due
Test Temp Result Inspector Supervisor Test Equipment
Serial No.
Test Equipment Re-
Calibration Date
Photo 1 Photo 2 Notes on the ValveMaterial Body
2014-121 PRV031 Port Crane Pc 300 Air Tank 5007 BOURKE VALVE 150 PSI '1/2" NPT M' LL 2014-
121/PRV031
13-Mar-
2014
13-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakBronze
2014-121 PRV032 Aviation Heli refueling (Heli
Deck)
020761-7 TAYLOR VALVE 150 PSI '1" Flange' 82D3741611-00-
10-0
2014-
121/PRV032
13-Mar-
2014
13-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakStainless
2014-121 PRV033 Mud Pump No 2 I-15955-J KUNKLE 70 PSI '2" NPT M' 912BJHM01-ME 2014-
121/PRV033
14-Mar-
2014
14-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Manufacturer setting at 125 Psi
client request adjust to system
requirement at 70 Psi. Test &
Pass.
Aiman Husin Shahrulbahtiar HakBronze
2014-121 PRV034 Mud Pump No 1 I-20503 KUNKLE 70 PSI '2" NPT M' 912BJHM01-ME 2014-
121/PRV034
14-Mar-
2014
14-Mar-
2015
23.5° C Fail AMETEK (1434066) 04-Sep-2014 Manufacturer setting at 125 Psi
client request adjust to system
requirement at 70 Psi. Overhaul
the unit due to badly leaking
during at low pressure test. Check
and found disk seat badly damage
and dent. Test & Fail.
Aiman Husin Shahrulbahtiar HakBronze
2014-121 PRV035 Mud Pump No 3 I-15955-J KUNKLE 70 PSI '2" NPT M' 912BJHM01-ME 2014-
121/PRV035
14-Mar-
2014
14-Mar-
2015
23.5° C Fail AMETEK (1434066) 04-Sep-2014 Manufacturer setting at 125 Psi
client request adjust to system
requirement at 70 Psi. Overhaul
the unit due to badly leaking
during at low pressure test check
and found disk badly dent.. Test &
Fail.
Aiman Husin Shahrulbahtiar HakBronze
2014-121 PRV036 Stbd Crane Air Tank R412007700 7L 10 BAR '1/2" BSP M' CWN614 2014-
121/PRV036
14-Mar-
2014
14-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakBronze
2014-121 PRV037 Barite Tank No 1 (Sack Room) PSV-004 H&L 62 PSI '2" Flange' SV01 2014-
121/PRV037
14-Mar-
2014
14-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakStainless
2014-121 PRV038 Barite Tank No 3 (Sack Room) PSV-001 H&L 62 PSI '2" Flange' SV01 2014-
121/PRV038
15-Mar-
2014
15-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakStainless
2014-121 PRV039 Barite Tank No 4 (Sack Room) PSV-005 H&L 62 PSI '2" Flange' SV01 2014-
121/PRV039
15-Mar-
2014
15-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakStainless
2014-121 PRV040 HP Washdown No 1 Fwd C11063150 JOKWANG 1300 PSI '4" Flange' JSU-FF100 2014-
121/PRV040
15-Mar-
2014
15-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakStainless
Page 4 of 7
● Singapore - K2 Specialist Services Pte Ltd, 521 Bukit Batok St 23, Unit 5E Excel Building, Singapore 659544, Tel: +65 6545 7646, Fax: +65 6545 7138
● Korea - K2 Specialist Services Pte Ltd, Level 2, 553-33, Okpo-1dong, Geoje-Si, Gyeongnam, South Korea 656-904, Tel: +82 55 688 1974, Fax: +82 55 688 1925
● Brasil - K2 do Brasil Serviços Ltda, Avenida Nossa Senhora da Glória, n° 2427 - sala 01, Cavaleiros, Macaé, RJ, Brasil CEP 27920-360, Tel: +55 22 2773 2211
● USA - K2 International, 222 Pennbright Dr., Suite 230, Houston TX 77090, U.S.A., Tel: +1 281 872 3600
SKD T-15 - Pressure Relief Valves Calibration List
Project No. PRV ID Equipment Ref Serial No. Manufacturer Set Pressure Size In Model/Type Certificate
No.
Date Tested Date Next
Due
Test Temp Result Inspector Supervisor Test Equipment
Serial No.
Test Equipment Re-
Calibration Date
Photo 1 Photo 2 Notes on the ValveMaterial Body
2014-121 PRV041 Barite Tank No 2 (Sack Room) PSV-010 H&L 62 PSI '2" Flange' SV01 2014-
121/PRV041
15-Mar-
2014
15-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakStainless
2014-121 PRV042 Refrigeration Compressor No 1
(auxiliary room)
AF1112-404 BOLTING VALVE 2.66 Mpa '1/2" BSP M' R22 R134 2014-
121/PRV042
15-Mar-
2014
15-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakStainless
2014-121 PRV043 Refrigeration Compressor No
3 (auxiliary room)
AF1112-444 BOLTING VALVE 2.66 Mpa '1/2" BSP M' R22 R134 2014-
121/PRV043
15-Mar-
2014
15-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakStainless
2014-121 PRV044 Refrigeration Compressor No 1
(auxiliary room)
AF1112-411 BOLTING VALVE 2.66 Mpa '1/2" BSP M' R22 R134 2014-
121/PRV044
15-Mar-
2014
15-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakStainless
2014-121 PRV045 HP Washdown No 2 Fwd C11063149 JOKWANG 1300 PSI '4" Flange' JSU-FF100 2014-
121/PRV045
16-Mar-
2014
16-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakStainless
2014-121 PRV046 Spare No.4 (Warehouse) 683180-19 HYDROSEAL 3300 PSI '3/4" NPT M' 3BV00N/G0 2014-
121/PRV046
16-Mar-
2014
16-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakStainless
2014-121 PRV047 Koomey unit No.1 (Des Deck) 040313092 BARKSDALE 3300 PSI '3/4" NPT M' T8014-3-33 2014-
121/PRV047
16-Mar-
2014
16-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakStainless
2014-121 PRV048 Koomey unit No.1 (Des Deck) 012213J17 BARKSDALE 3300 PSI '3/4" NPT M' T8014-3-33 2014-
121/PRV048
16-Mar-
2014
16-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakStainless
2014-121 PRV049 Hot Water Portable Tank No 4
(Auxiliary Machinery Room))
0G1438.6C CASH ASME 150 PSI '3/4" NPT M' FVMX-8C 2014-
121/PRV049
17-Mar-
2014
17-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakBronze
2014-121 PRV050 Hot Water Portable Tank No 3
(Auxiliary Machinery Room))
0G1438.6C CASH ASME 150 PSI '3/4" NPT M' FVMX-8C 2014-
121/PRV050
17-Mar-
2014
17-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakBronze
Page 5 of 7
● Singapore - K2 Specialist Services Pte Ltd, 521 Bukit Batok St 23, Unit 5E Excel Building, Singapore 659544, Tel: +65 6545 7646, Fax: +65 6545 7138
● Korea - K2 Specialist Services Pte Ltd, Level 2, 553-33, Okpo-1dong, Geoje-Si, Gyeongnam, South Korea 656-904, Tel: +82 55 688 1974, Fax: +82 55 688 1925
● Brasil - K2 do Brasil Serviços Ltda, Avenida Nossa Senhora da Glória, n° 2427 - sala 01, Cavaleiros, Macaé, RJ, Brasil CEP 27920-360, Tel: +55 22 2773 2211
● USA - K2 International, 222 Pennbright Dr., Suite 230, Houston TX 77090, U.S.A., Tel: +1 281 872 3600
SKD T-15 - Pressure Relief Valves Calibration List
Project No. PRV ID Equipment Ref Serial No. Manufacturer Set Pressure Size In Model/Type Certificate
No.
Date Tested Date Next
Due
Test Temp Result Inspector Supervisor Test Equipment
Serial No.
Test Equipment Re-
Calibration Date
Photo 1 Photo 2 Notes on the ValveMaterial Body
2014-121 PRV051 Hot Water Portable Tank No 1
(Auxiliary Machinery Room))
0G1438.6C CASH ASME 150 PSI '3/4" NPT M' FVMX-8C 2014-
121/PRV051
17-Mar-
2014
17-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakBronze
2014-121 PRV052 Hot Water Portable Tank No 2
(Auxiliary Machinery Room))
0G1438.6C CASH ASME 150 PSI '3/4" NPT M' FVMX-8C 2014-
121/PRV052
17-Mar-
2014
17-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakBronze
2014-121 PRV053 VFD Condenser No.1 (Mud
pump room)
AF1112-408 BOLTING VALVE 2.66 Mpa '1/2" BSP M' R22 R134 2014-
121/PRV053
17-Mar-
2014
17-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakStainless
2014-121 PRV054 VFD Condenser No.2 (Mud
pump room)
AF1112-471 BOLTING VALVE 2.66 Mpa '1/2" BSP M' R22 R134 2014-
121/PRV054
17-Mar-
2014
17-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakStainless
2014-121 PRV055 Cold Water Portable Tank
(Auxiliary Machinery Room)
11114961 Shanghai
Tianzheng Valve
7.5 BAR '1 1/4" BSP M' A21W-16P 2014-
121/PRV055
17-Mar-
2014
17-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakStainless
2014-121 PRV056 Emergency Compressor 1
(Deck Des)
0G8703.5C NBR 80 PSI '1/4" NPT M' SA25 2014-
121/PRV056
18-Mar-
2014
18-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakBronze
2014-121 PRV057 Emergency Compressor 2
(Deck Des)
0G8703.5C NBR 80 PSI '1/4" NPT M' SA25 2014-
121/PRV057
18-Mar-
2014
18-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakBronze
2014-121 PRV058 Koomey Unit (Des Derrick) 0G8703.5C NBR 150 PSI '1/2" NPT M' SF50 2014-
121/PRV058
18-Mar-
2014
18-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakBronze
2014-121 PRV059 Spare No.5 (Warehouse) 102611Y42 BARKSDALE 3300 PSI '3/4" NPT M' T8014-3-33 2014-
121/PRV059
18-Mar-
2014
18-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakStainless
2014-121 PRV060 Spare No.6 (Warehouse) 030512X26 BARKSDALE 3300 PSI '3/4" NPT M' T8014-3-33 2014-
121/PRV060
18-Mar-
2014
18-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakStainless
Page 6 of 7
● Singapore - K2 Specialist Services Pte Ltd, 521 Bukit Batok St 23, Unit 5E Excel Building, Singapore 659544, Tel: +65 6545 7646, Fax: +65 6545 7138
● Korea - K2 Specialist Services Pte Ltd, Level 2, 553-33, Okpo-1dong, Geoje-Si, Gyeongnam, South Korea 656-904, Tel: +82 55 688 1974, Fax: +82 55 688 1925
● Brasil - K2 do Brasil Serviços Ltda, Avenida Nossa Senhora da Glória, n° 2427 - sala 01, Cavaleiros, Macaé, RJ, Brasil CEP 27920-360, Tel: +55 22 2773 2211
● USA - K2 International, 222 Pennbright Dr., Suite 230, Houston TX 77090, U.S.A., Tel: +1 281 872 3600
SKD T-15 - Pressure Relief Valves Calibration List
Project No. PRV ID Equipment Ref Serial No. Manufacturer Set Pressure Size In Model/Type Certificate
No.
Date Tested Date Next
Due
Test Temp Result Inspector Supervisor Test Equipment
Serial No.
Test Equipment Re-
Calibration Date
Photo 1 Photo 2 Notes on the ValveMaterial Body
2014-121 PRV061 Main Air Tank (Des Deck) B283C485 KNUCKLE 200 PSI '2" NPT M' 6021JHT01-LM 2014-
121/PRV061
18-Mar-
2014
18-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakBronze
2014-121 PRV062 Air Receiver Tank No 1 (Pit
Tank Room)
730V162 JOKWANG 175 PSI '1" Flange' JSU-FF21 2014-
121/PRV062
18-Mar-
2014
18-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakStainless
2014-121 PRV063 Air Receiver Tank No 2 (Pit
Tank Room)
730V161 JOKWANG 175 PSI '1" Flange' JSU-FF21 2014-
121/PRV063
18-Mar-
2014
18-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakStainless
2014-121 PRV064 Anchor Winch C 0G8703.5C NBR 150 PSI '3/4" NPT M' SB75 2014-
121/PRV064
18-Mar-
2014
18-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakBronze
2014-121 PRV065 Anchor Winch D 0G8703.5C NBR 150 PSI '3/4" NPT M' SB75 2014-
121/PRV065
18-Mar-
2014
18-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakBronze
2014-121 PRV066 Anchor Winch B 0G8703.5C NBR 150 PSI '3/4" NPT M' SB75 2014-
121/PRV066
18-Mar-
2014
18-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakBronze
2014-121 PRV067 Anchor Winch A 0G8703.5C NBR 150 PSI '3/4" NPT M' SB75 2014-
121/PRV067
18-Mar-
2014
18-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakBronze
2014-121 PRV068 Mixing Hooper No.1 (Sack
Room)
PSV-006 H&L 62.5 PSI '2" Flange' SV01 2014-
121/PRV068
19-Mar-
2014
19-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakStainless
2014-121 PRV069 Mixing Hooper No.2 (Sack
Room)
PSV-002 H&L 62.5 PSI '2" Flange' SV01 2014-
121/PRV069
19-Mar-
2014
19-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakStainless
2014-121 PRV070 Low Pressure Air (Lower Main
Deck)
C11058753 JOKWANG 60 PSI '4" Flange' JSU-FF21 2014-
121/PRV070
19-Mar-
2014
19-Mar-
2015
23.5° C Pass AMETEK (1434066) 04-Sep-2014 Test & Pass.Aiman Husin Shahrulbahtiar HakStainless
Total number of items : 70
Page 7 of 7
● Singapore - K2 Specialist Services Pte Ltd, 521 Bukit Batok St 23, Unit 5E Excel Building, Singapore 659544, Tel: +65 6545 7646, Fax: +65 6545 7138
● Korea - K2 Specialist Services Pte Ltd, Level 2, 553-33, Okpo-1dong, Geoje-Si, Gyeongnam, South Korea 656-904, Tel: +82 55 688 1974, Fax: +82 55 688 1925
● Brasil - K2 do Brasil Serviços Ltda, Avenida Nossa Senhora da Glória, n° 2427 - sala 01, Cavaleiros, Macaé, RJ, Brasil CEP 27920-360, Tel: +55 22 2773 2211
● USA - K2 International, 222 Pennbright Dr., Suite 230, Houston TX 77090, U.S.A., Tel: +1 281 872 3600
K2 Specialist Services Pte. Ltd.
Structural Design & Engineering | Derrick Assembly | FPSO IRM | Rig IRM | Training
Unit 5E Excel Building | 521 Bukit Batok Street 23 | Singapore 659544 tel (65) 6545 7646 | fax (65) 6545 7138 | email [email protected] | website www.k2velosi.com Co. Registration No: 199708215 R
2.2 : Certificate of PRV Calibration
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV001
10-Mar-2014
10-Mar-2015
Spare No.1 (Warehouse) 70 PSI
KUNKLE 912BJHM01-JE
No serial number marked on the PRV PRV001
23.5° C'2" NPT M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Unit existing use on Mud Pump No.3.Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV002
10-Mar-2014
10-Mar-2015
Spare No.2 (Warehouse) 70 PSI
KUNKLE 912BJHM01-JE
No serial number marked on the PRV PRV002
23.5° C'2" NPT M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Unit existing use on Mud Pump No.2.Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV003
10-Mar-2014
10-Mar-2015
Spare No.3 (Warehouse) 70 PSI
KUNKLE 912BJHM01-JE
I-20509 PRV003
23.5° C'2" NPT M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Unit existing use on Mud Pump No.1.Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV004
10-Mar-2014
10-Mar-2015
Cement Tank No. 3 62.5 PSI
H&L SV01
PSV-009 PRV004
23.5° C'2" Flange'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV005
10-Mar-2014
10-Mar-2015
Cement Tank No. 1 62.5 PSI
H&L SV01
PSV-003 PRV005
23.5° C'2" Flange'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV006
10-Mar-2014
10-Mar-2015
Cement Tank No. 2 62.5 PSI
H&L SV01
PSV-007 PRV006
23.5° C'2" Flange'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV007
10-Mar-2014
10-Mar-2015
Cement Tank No. 4 62.5 PSI
H&L SV01
PSV-008 PRV007
23.5° C'2" Flange'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV008
11-Mar-2014
11-Mar-2015
Oil Separator Air Compressor D (engine Room) 175 PSI
NBR SW12
OG8703.5C PRV008
23.5° C'1 1/4" NPT M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV009
11-Mar-2014
11-Mar-2015
Air Dryer No 4B 10.5 BAR
TUV 10-2055.20
107772912-1 PRV009
23.5° C'1" BSP M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV010
11-Mar-2014
11-Mar-2015
Air Dryer No 4A 10.5 BAR
TUV 10-2055.20
107772912-2 PRV010
23.5° C'1" BSP M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV011
11-Mar-2014
11-Mar-2015
Air Dryer No 1A 10.5 BAR
TUV 10-2055.20
107772912-4 PRV011
23.5° C'1" BSP M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV012
11-Mar-2014
11-Mar-2015
Air Dryer No 1B 10.5 BAR
TUV 10-2055.20
107772912-3 PRV012
23.5° C'1" BSP M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV013
11-Mar-2014
11-Mar-2015
Oil Separator Air Compressor A (engine Room) 175 PSI
NBR SW12
OG8703.5C PRV013
23.5° C'1 1/4" NPT M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV014
11-Mar-2014
11-Mar-2015
Oil Separator Air Compressor B (engine Room) 175 PSI
NBR SW12
OG8703.5C PRV014
23.5° C'1 1/4" NPT M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV015
11-Mar-2014
11-Mar-2015
Air Dryer No 2B 10.5 BAR
TUV 10-2055.20
107772912-5 PRV015
23.5° C'1" BSP M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV016
11-Mar-2014
11-Mar-2015
Air Dryer No 2A 10.5 BAR
TUV 10-2055.20
107772912-6 PRV016
23.5° C'1" BSP M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV017
11-Mar-2014
11-Mar-2015
Air Dryer No 3A 10.5 BAR
TUV 10-2055.20
107772912-7 PRV017
23.5° C'1" BSP M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV018
11-Mar-2014
11-Mar-2015
Air Dryer No 3B 10.5 BAR
TUV 10-2055.20
107772912-8 PRV018
23.5° C'1" BSP M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV019
11-Mar-2014
11-Mar-2015
Oil Separator Air Compressor C (engine Room) 175 PSI
NBR SW12
OG8703.5C PRV019
23.5° C'1 1/4" NPT M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV020
12-Mar-2014
12-Mar-2015
Water maker (engine Room) 1 BAR
TUV 10-1090
01072409 PRV020
23.5° C'1" BSP M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV021
12-Mar-2014
12-Mar-2015
Water maker filter No.1 (engine Room) 4 BAR
DN15 ZJP090616127
No serial number marked on the PRV PRV021
23.5° C'1/2" NPT M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV022
12-Mar-2014
12-Mar-2015
Water maker filter No.2 (engine Room) 4 BAR
DN15 ZJP090616127
No serial number marked on the PRV PRV022
23.5° C'1/2" NPT M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV023
12-Mar-2014
12-Mar-2015
Emergency Compressor High Side 20.7 BAR
TUV 10-2055.7
108052912 PRV023
23.5° C'1/4" NPT M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV024
12-Mar-2014
12-Mar-2015
Emergency Compressor Low Side 20.7 BAR
TUV 10-2055.7
107932912 PRV024
23.5° C'1/4" NPT M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV025
12-Mar-2014
12-Mar-2015
Emergency Compressor Low Side 20.7 BAR
TUV 10-2055.7
107942912 PRV025
23.5° C'1/4" NPT M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV026
12-Mar-2014
12-Mar-2015
Tender Emergency Air Tank 14.3 BAR
TUV 10-2055.16
108102912 PRV026
23.5° C'3/4" NPT M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV027
13-Mar-2014
13-Mar-2015
Sack Room Dust Collector Left Aft 72 PSI
MERCER KN-2GX1U1
750408 PRV027
23.5° C'2" NPT M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV028
13-Mar-2014
13-Mar-2015
Sack Room Dust Collector Right Aft 72 PSI
MERCER KN-2GX1U1
750407 PRV028
23.5° C'2" NPT M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV029
13-Mar-2014
13-Mar-2015
Oily Water Separator No.1 (Mud Pump Room) 60 PSI
Durgo V50
CR08C PRV029
23.5° C'1" BSP M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV030
13-Mar-2014
13-Mar-2015
Oily Water Separator No.2 (Mud Pump Room) 6 BAR
MEDANA & VISCA LOTTO 2
1761805-01 PRV030
23.5° C'3/4" NPT M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV031
13-Mar-2014
13-Mar-2015
Port Crane Pc 300 Air Tank 150 PSI
BOURKE VALVE LL
5007 PRV031
23.5° C'1/2" NPT M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV032
13-Mar-2014
13-Mar-2015
Aviation Heli refueling (Heli Deck) 150 PSI
TAYLOR VALVE 82D3741611-00-10-0
020761-7 PRV032
23.5° C'1" Flange'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV033
14-Mar-2014
14-Mar-2015
Mud Pump No 2 70 PSI
KUNKLE 912BJHM01-ME
I-15955-J PRV033
23.5° C'2" NPT M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Manufacturer setting at 125 Psi client request adjust to system requirement at 70 Psi. Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV036
14-Mar-2014
14-Mar-2015
Stbd Crane Air Tank 10 BAR
7L CWN614
R412007700 PRV036
23.5° C'1/2" BSP M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV037
14-Mar-2014
14-Mar-2015
Barite Tank No 1 (Sack Room) 62 PSI
H&L SV01
PSV-004 PRV037
23.5° C'2" Flange'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV038
15-Mar-2014
15-Mar-2015
Barite Tank No 3 (Sack Room) 62 PSI
H&L SV01
PSV-001 PRV038
23.5° C'2" Flange'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV039
15-Mar-2014
15-Mar-2015
Barite Tank No 4 (Sack Room) 62 PSI
H&L SV01
PSV-005 PRV039
23.5° C'2" Flange'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV040
15-Mar-2014
15-Mar-2015
HP Washdown No 1 Fwd 1300 PSI
JOKWANG JSU-FF100
C11063150 PRV040
23.5° C'4" Flange'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV041
15-Mar-2014
15-Mar-2015
Barite Tank No 2 (Sack Room) 62 PSI
H&L SV01
PSV-010 PRV041
23.5° C'2" Flange'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV042
15-Mar-2014
15-Mar-2015
Refrigeration Compressor No 1 (auxiliary room) 2.66 Mpa
BOLTING VALVE R22 R134
AF1112-404 PRV042
23.5° C'1/2" BSP M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV043
15-Mar-2014
15-Mar-2015
Refrigeration Compressor No 3 (auxiliary room) 2.66 Mpa
BOLTING VALVE R22 R134
AF1112-444 PRV043
23.5° C'1/2" BSP M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV044
15-Mar-2014
15-Mar-2015
Refrigeration Compressor No 1 (auxiliary room) 2.66 Mpa
BOLTING VALVE R22 R134
AF1112-411 PRV044
23.5° C'1/2" BSP M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV045
16-Mar-2014
16-Mar-2015
HP Washdown No 2 Fwd 1300 PSI
JOKWANG JSU-FF100
C11063149 PRV045
23.5° C'4" Flange'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV046
16-Mar-2014
16-Mar-2015
Spare No.4 (Warehouse) 3300 PSI
HYDROSEAL 3BV00N/G0
683180-19 PRV046
23.5° C'3/4" NPT M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV047
16-Mar-2014
16-Mar-2015
Koomey unit No.1 (Des Deck) 3300 PSI
BARKSDALE T8014-3-33
040313092 PRV047
23.5° C'3/4" NPT M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV048
16-Mar-2014
16-Mar-2015
Koomey unit No.1 (Des Deck) 3300 PSI
BARKSDALE T8014-3-33
012213J17 PRV048
23.5° C'3/4" NPT M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV049
17-Mar-2014
17-Mar-2015
Hot Water Portable Tank No 4 (Auxiliary Machinery Room)) 150 PSI
CASH ASME FVMX-8C
0G1438.6C PRV049
23.5° C'3/4" NPT M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV050
17-Mar-2014
17-Mar-2015
Hot Water Portable Tank No 3 (Auxiliary Machinery Room)) 150 PSI
CASH ASME FVMX-8C
0G1438.6C PRV050
23.5° C'3/4" NPT M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV051
17-Mar-2014
17-Mar-2015
Hot Water Portable Tank No 1 (Auxiliary Machinery Room)) 150 PSI
CASH ASME FVMX-8C
0G1438.6C PRV051
23.5° C'3/4" NPT M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV052
17-Mar-2014
17-Mar-2015
Hot Water Portable Tank No 2 (Auxiliary Machinery Room)) 150 PSI
CASH ASME FVMX-8C
0G1438.6C PRV052
23.5° C'3/4" NPT M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV053
17-Mar-2014
17-Mar-2015
VFD Condenser No.1 (Mud pump room) 2.66 Mpa
BOLTING VALVE R22 R134
AF1112-408 PRV053
23.5° C'1/2" BSP M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV054
17-Mar-2014
17-Mar-2015
VFD Condenser No.2 (Mud pump room) 2.66 Mpa
BOLTING VALVE R22 R134
AF1112-471 PRV054
23.5° C'1/2" BSP M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV055
17-Mar-2014
17-Mar-2015
Cold Water Portable Tank (Auxiliary Machinery Room) 7.5 BAR
Shanghai Tianzheng Valve A21W-16P
11114961 PRV055
23.5° C'1 1/4" BSP M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV056
18-Mar-2014
18-Mar-2015
Emergency Compressor 1 (Deck Des) 80 PSI
NBR SA25
0G8703.5C PRV056
23.5° C'1/4" NPT M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV057
18-Mar-2014
18-Mar-2015
Emergency Compressor 2 (Deck Des) 80 PSI
NBR SA25
0G8703.5C PRV057
23.5° C'1/4" NPT M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV058
18-Mar-2014
18-Mar-2015
Koomey Unit (Des Derrick) 150 PSI
NBR SF50
0G8703.5C PRV058
23.5° C'1/2" NPT M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV059
18-Mar-2014
18-Mar-2015
Spare No.5 (Warehouse) 3300 PSI
BARKSDALE T8014-3-33
102611Y42 PRV059
23.5° C'3/4" NPT M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV060
18-Mar-2014
18-Mar-2015
Spare No.6 (Warehouse) 3300 PSI
BARKSDALE T8014-3-33
030512X26 PRV060
23.5° C'3/4" NPT M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV061
18-Mar-2014
18-Mar-2015
Main Air Tank (Des Deck) 200 PSI
KNUCKLE 6021JHT01-LM
B283C485 PRV061
23.5° C'2" NPT M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV062
18-Mar-2014
18-Mar-2015
Air Receiver Tank No 1 (Pit Tank Room) 175 PSI
JOKWANG JSU-FF21
730V162 PRV062
23.5° C'1" Flange'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV063
18-Mar-2014
18-Mar-2015
Air Receiver Tank No 2 (Pit Tank Room) 175 PSI
JOKWANG JSU-FF21
730V161 PRV063
23.5° C'1" Flange'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV064
18-Mar-2014
18-Mar-2015
Anchor Winch C 150 PSI
NBR SB75
0G8703.5C PRV064
23.5° C'3/4" NPT M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV065
18-Mar-2014
18-Mar-2015
Anchor Winch D 150 PSI
NBR SB75
0G8703.5C PRV065
23.5° C'3/4" NPT M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV066
18-Mar-2014
18-Mar-2015
Anchor Winch B 150 PSI
NBR SB75
0G8703.5C PRV066
23.5° C'3/4" NPT M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV067
18-Mar-2014
18-Mar-2015
Anchor Winch A 150 PSI
NBR SB75
0G8703.5C PRV067
23.5° C'3/4" NPT M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV068
19-Mar-2014
19-Mar-2015
Mixing Hooper No.1 (Sack Room) 62.5 PSI
H&L SV01
PSV-006 PRV068
23.5° C'2" Flange'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV069
19-Mar-2014
19-Mar-2015
Mixing Hooper No.2 (Sack Room) 62.5 PSI
H&L SV01
PSV-002 PRV069
23.5° C'2" Flange'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
CERTIFICATE OF PRESSURE RELIEF VALVES CALIBRATION
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Certificate No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Test Equiment Serial No. Test Equipment Re-Calibration Date
2014-121/PRV070
19-Mar-2014
19-Mar-2015
Low Pressure Air (Lower Main Deck) 60 PSI
JOKWANG JSU-FF21
C11058753 PRV070
23.5° C'4" Flange'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Test & Pass.
Result
Pass
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Statement:
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
I certify that the items described herein were examined and calibrated in accordance with K2 procedure and were found to be free from any measurement defects and within specification.This certificate is issued for the purpose of conforming the accurancy of the pressure device in calibration and orset pressure This certificate does not warrant the end application and or the suitability of the pressure device in that application but only the accuracy of the device to measure and or relieve pressure against a known reference.
Shahrulbahtiar Hak
K2 Specialist Services Pte. Ltd.
Structural Design & Engineering | Derrick Assembly | FPSO IRM | Rig IRM | Training
Unit 5E Excel Building | 521 Bukit Batok Street 23 | Singapore 659544 tel (65) 6545 7646 | fax (65) 6545 7138 | email [email protected] | website www.k2velosi.com Co. Registration No: 199708215 R
2.3 : Failed PRV Calibration Report
FAILED PRESSURE RELIEF VALVES CALIBRATION REPORT
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Report No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Calibration Equiment ID Re-Calibration Date
2014-121-PRV-034
14-Mar-2014
14-Mar-2015
Mud Pump No 1 70 PSI
KUNKLE 912BJHM01-ME
I-20503 PRV034
23.5° C'2" NPT M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Manufacturer setting at 125 Psi client request adjust to system requirement at 70 Psi. Overhaul the unit due to badly
leaking during at low pressure test. Check and found disk seat badly damage and dent. Test & Fail.
Result
Fail
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
Shahrulbahtiar Hak
FAILED PRESSURE RELIEF VALVES CALIBRATION REPORT
Project No.:
Client / Owner:
Name of Vessel / Item:
Location:
Equipment Ref
Manufacturer
Serial No.
Report No.:
Date of Calibration:
Next Test Date:
Set Pressure
Model/Type
Valve ID
Size In Test Temp
Method of Calibration
Calibration Equiment ID Re-Calibration Date
2014-121-PRV-035
14-Mar-2014
14-Mar-2015
Mud Pump No 3 70 PSI
KUNKLE 912BJHM01-ME
I-15955-J PRV035
23.5° C'2" NPT M'
Witnessing & Calibrate
AMETEK (1434066)
2014-121
SapuraKencana
SKD T-15
Thailand
Test Medium
Water
04-Sep-2014
Notes on the Gauge
Manufacturer setting at 125 Psi client request adjust to system requirement at 70 Psi. Overhaul the unit due to badly
leaking during at low pressure test check and found disk badly dent.. Test & Fail.
Result
Fail
K2-IMSF-0065 Rev 01
Name & Address of the Employer:
Except for cases of proven negligence of fraud by K2, the Client agrees to hold harmless and indemnify K2 and its inspectors, technicians, officers, employees, agents or subcontractors against all claims (actual or threatened) by them and by any third party for loss, damage or expense of whatsoever nature including all legal expenses and related costs and however arising relating to the performance, purported performance or non-performance of the services or out of or in connection with Client’s product, process or service the subject of the certification including, without limitation, product liability claims. The total liability of K2 to the Client in respect of any claims for loss, damage or expense of any nature and howsoever arising shall be limited, in respect of any one event or series of connected events, to an amount equal to SGD 1,000 (excluding Value Added Tax thereon).
K2 Specialist Services Pte Ltd , 521 Bukit Batok St 23, Unit 5E, Excel Building, Singapore 659544
This is to confirm that the equipment stated herein was attended by the Company’s competent person and particulars & findings stated herein are correct at the time of inspection.
Calibration Technician
Name
Date
Sign
Date
:
: 01-Apr-2014
:
: 01-Apr-2014
Shahrulbahtiar Hak
K2 Specialist Services Pte. Ltd.
Structural Design & Engineering | Derrick Assembly | FPSO IRM | Rig IRM | Training
Unit 5E Excel Building | 521 Bukit Batok Street 23 | Singapore 659544 tel (65) 6545 7646 | fax (65) 6545 7138 | email [email protected] | website www.k2velosi.com Co. Registration No: 199708215 R
3.0: Personnel & Equipment Certificates