- Installation manual -

TAIYO YUDEN Component Library for ANSYS Designer / Nexxim

Contents

* How to install Taiyo Yuden Component Library(common for Nexxim and Ansoft Designer)

* How to configure Library on Nexxim* How to use Library on Nexxim

* How to configure Library on ANSYS Designer (former circuit engine)* How to use Library on ANSYS Designer (former circuit engine)

How to install TAIYO YUDEN Component Library(common for Nexxim and ANSYS Designer)

<Unzipped folder>

Step1. Unzip “AS_TY**.zip”Step2. Copy the unzipped files into the directory where Ansoft Designer is

installed (<ANSYS Designer>) . (for both Nexxim and ANSYS Designer)* Delete the folder “<ANSYS Designer>¥userlib¥Taiyo Yuden” if it already exists, before installing current version of the Library.

* In case that you use ANSYS 15.0 or 16.0, copy Taiyo Yuden folder to <ANSYS Designer>¥Designer¥userlib (ANSYS 15.0)<ANSYS Designer>¥ElectronicsDesktop¥userlib (ANSYS 16.0)In case that you use ANSYS 19.0, copy Bitmaps folder to

<ANSYS Designer>¥Win64¥syslib

How to install TAIYO YUDEN Component Library

**

Copy the whole folder

<ANSYS Designer> folder

How to configure Library on Nexxim

Step 1

After launching ANSYS Designer, 1. Right-click on the project name (e.g. Project1) in the Project Manager. Select “Insert” > “Insert Nexxim Circuit Design”Then a schematic window will open.

How to configure Library on Nexxim

Step 2

Step 3

Step 4

Step 7

Step 5

2. Select “Tools” > “Configure Libraries… ” from the tool bar. Then “Configure Design Library” dialogue box will open.3. Select the button “User Libraries” and confirm that there is “Taiyo_Yuden” in “Available Libraries” box.4. Select “Components”.5. Select “Taiyo_Yuden” folder and move it to “Configured Libraries” using >> button.6. Repeat Step 4 and 5 for Symbols and Footprints as well.7. Tick “Save as default” and press “OK”.

How to configure TAIYO YUDEN Library on Nexxim

How to configure TAIYO YUDEN Library on Nexxim

8. Reboot ANSYS Designer.

Do the following procedure with schematic window open.

9. Click the component tab, then select User Libraries -> Taiyo Yuden -> SMT Global Control and put it on the schematic.10. Double click the SMT Global Control to open the property window.11. Uncheck “Show Hidden” checkbox and click OK button.

That’s all for the library configuration.

Step 9

Step 10

Step 11

How to use Library on Nexxim

How to use Library on Nexxim - Selecting a component group

Step 2

Step 1

To select a component group in the Library,1. Select “Components” tab of Project Manager.2. Open Taiyo_Yuden folder in User Libraries and select a component group.

Double-click on the symbol

Click on “Choose

Model” button

Use “Choose Model” button to select a component of TAIYO YUDEN Library.You can select an appropriate one from the data provided for a design as well as the model name.

You can choose S-parameter or Equivalent model as a simulation model for each element.

How to use Library on Nexxim - Selecting a component

1. For an analysis on Nexxim, be sure to put on the schematic a [SMT Global Control] in Taiyo_Yuden.2. For a transient analysis, tick [Transient_Analysis] in the property of [SMT Global Control]. Then set [Transient_Frequency] value to the fundamental frequency of the signal to be analyzed.

How to use Library on Nexxim - Placing SMT Global Control (only on Nexxim)

simulation results

Layout of a TAIYO YUDEN Librarycomponent and microstrip lines in a Layout window

How to use TAIYO YUDEN Library on Nexxim- Displaying layout and simulation results

How to configure Library on ANSYS Designer(former circuit engine, version 3.5.x or prior)

Step 1

After launching ANSYS Designer, 1. Right-click on the project name (e.g. Project1) in the Project Manager. Select “Insert” > “Insert Circuit Design”Then a schematic window will open.

How to configure Library on ANSYS Designer

Step 2 Step 3

Step 4

Step 5

Step 7

2. Select “Tools” > “Configure Libraries… ” from the tool bar.Then “Configure Design Library” dialogue box will open.3. Select the button “User Libraries” and confirm that there is “Taiyo_Yuden” in “Available Libraries” box.4. Select “Components”.5. Select “Taiyo_Yuden” folder and move it to “Configured Libraries” using >> button.6. Repeat Step 4 and 5 for Symbols and Footprints as well.7. Tick “Save as default” and press “OK”.

How to configure Library on ANSYS Designer

How to use Library on ANSYS Designer(former circuit engine, version 3.5 or prior)

Step 2

Step 1

To select a component group in the Library,1. Select “Components” tab of Project Manager.2. Open Taiyo_Yuden folder in User Libraries and select a component group.

How to use Library on ANSYS Designer- Selecting a component group

Double-click on the symbol

Click on “Choose Model” button

Use “Choose Model” button to select a component in TAIYO YUDEN Library.You can select an appropriate one from the data provided for a design as well as the model name.

You can choose S-parameter or Equivalent model as a simulation model for each element.

How to use Library on ANSYS Designer- Selecting a component

Displaying simulation results

Analysis settings

Layout of a TAIYO YUDEN Librarycomponent and microstrip lines in a Layout window

How to use Library on ANSYS Designer- Displaying layout and simulation results