tampere wear center and wear forum
DESCRIPTION
Tampere Wear Center (TWC) concentrates on both scientific and practical aspects of wear, trying to bridge the gap between scientific basic research and applied industrial research and development. The aim of TWC is to provide new insight to the mechanisms of wear and thereby facilitate the development of new wear resistant materials and solve the practical wear problems that the industry constantly faces. TWC is a part of the Department of Materials Science of Tampere University of Technology. TWC utilizes the versatile and up-to-date research and testing equipment of DMS as well as exploits the knowledge and expertise of its reseach in all groups of materials. TWC is rapidly developing into an internationally recognized concentration of advanced wear test facilities and expertise. Wear Forum is a collaboration network between TWC, research institutes, and companies. Wear forum connects the material specialists with wear experts. Forum offers both a national and an international collaboration network. http://www.tut.fi/twc/enTRANSCRIPT
Tampere Wear Center
Kati ValtonenProject Manager
2Tampere University ofTechnology (TUT)– At the Leading Edge
• Established in 1965• Started operating in the form of a foundation in 2010• 10,400 students (2012)• Collaborates with 200 universities around the world
Department of Materials ScienceInternationally high-level know-how on all materials based on
strong interdisciplinary basic research
Department of Materials Science• The only higher education unit in Finland covering all material
groups– Personnel about 160, 11 professors, Head of the Department Prof. Erkki
Levänen– Over 900 M.Sc. (Eng.), 80 Lic.Tech., and 60 Ph.D. thesis and more than
6000 publications since 1969– International Degree Programme in Materials Science
• High-level basic research of the structure, properties,processing, and use of materials– Researcher with knowledge of and expertise in all groups of materials– Versatile and up-to-date research and testing equipment
• Strong collaboration with industry and academic units– Research funding comes mainly from industry, SHOKs, Tekes, Academy
of Finland, and the EU• Networks internationally and participates in international research
projects– Scientific collaboration and research exchange
Tampere Wear Center - TWC
Tampere Wear Center - TWC• Concentrates on both scientific and practical
aspects of wear and tribology• Strengthens research in the field of wear and
tribology of materials• Networks internationally• Develops wear-related problem-solving
services for industry• Versatile and up-to-date research and testing
equipment• Researchers with knowledge and expertise
on all groups of materials• Numerical contact modeling and
experimental verification of the models• Special expertise areas heavy abrasion,
impact wear, fretting and tribology of machineelements, such as gears, bearings, brakes,seals, and frictional joints
TWC – Wear Research• TWC has excellent infrastructure for wear research, as well as highly
qualified scientists and research engineers for the needs of both long-term scientific research and product development for the industry
• Wear research is conducted in close collaboration with severalinternationally recognized partners, such as the National ResearchCouncil of Canada (NRC), the Austrian Excellence Center for Tribology(AC2T), VITO, TEKNIKER, the University of Sheffield, the University ofSouthampton, the University of Manchester, Luleå University ofTechnology, and Tallinn University of Technology. Of these, NRC, AC2Tand the University of Southampton have also been recently targets ofresearch exchange.
• One example of TWC’s international activities is the recently foundedNordic Hard Rock Tribology Network, RockTrib, embracing several keyresearch institutes in the field of hard rock tribology in Nordic countries,including Norwegian University of Science and Technology (NTNU),SINTEF, Luleå University of Technology, Uppsala University, DalarnaUniversity, and VTT.
Wear Forum• connects material specialists with wear experts• offers both national and international collaboration
networks• co-operation link between companies and TWC• annual International Wear Seminar• general assembly at least twice a year• thematic meetings and training for the member
companies• coordinator works as a liaison with the companies• easy way to offer preliminary or R&D studies for
thesis works• Wear Forum internet database
Wear Forum MemberCompanies
• Alfamat Oy• Atlas Copco Rotex Oy• Dalian Nurmi Hydraulics Co Ltd• Hilamet Oy• Kuusakoski Oy• KWH Mirka Oy• Megatrex Oy• Metso Minerals Oy
• Miilux Oy• Outotec (Finland) Oy• Rautaruukki Oyj• Sandvik Mining and Construction Oy• Uddeholm Oy• Wärtsilä Finland Oy
Research equipment• Wear equipment: Pin-on-disk/Ball-on-disk,
Crushing pin-on-disk, Uniaxial crusher, Dualpivoted jaw crusher, Impeller-tumbler, Erosiontester, High-speed slurry-pot type erosiontester, Cavitation erosion tester, High velocityparticle impactor, Ball-on-block, Hammer mill,High-speed sliding test rig, Single disc refiner,Pin-on-plate, Biomaterial crusher, Block-on-ring, Rubber wheel abrasion testers, etc.
• Tribology and testing of machine elements• Electron microscopes (UHR FEG-SEM, TEM)• Hopkinson Split Bar• Digital image correlation system• Mechanical testing• Hardness testing• Thermal spraying• Other equipment
TWC projects 1/2• FIMECC BSA: Design beyond present codes
– Optimization, prediction and design guidelines for improved wear life ofnovel steels and metallic multimaterials
– Surface fatigue and extreme load carrying capacity of gears• FIMECC HYBRIDS: Multifunctional thick coatings and composites
– Thermal spray coatings by high kinetic process– Environmental barrier coatings for high temperature corrosion and wear in
power generation• FIMECC HYBRIDS: Polymer
multifunctional sliding materials– Dynamic loaded polymer-metal hybrid
structures for wear resistantapplications
– Sliding bearing performance in full andmixed lubrication conditions
• FIMECC BSA & HYBRIDS:Fundamentals and modelling
TWC projects 2/2• FIMECC DEMAPP: Wear resistant materials and solutions
– Characterization and development of the microstructure, properties andperformance of wear resistant materials for selected environments
– Modeling and simulation of wear processes– Novel coating processes for wear protection– Friction and wear of polymers
• FIMECC DEMAPP: Friction and energy– High friction low wear contacts– Low friction in process environment
• FIMECC LIGHT: Low density materials– Slurry-erosion testing of GFRP laminates– Dynamically loaded wear resistant steel-
polymer hybrids• Research services for industry and other
units
28th International Conference onSurface Modification Technologies16.-18.6.2014 Tampere
SETEC 14SAMPE Europe TechnicalConference & Table TopExhibition10.-11.9.2014 Tampere Hall,Tampere
Scientific conference for Smart and functionaltextiles, Well-Being, Thermal comfort inclothing, Design, Thermal Manikins andModelling7.-9.9.2014 Tampere Hall, Tampere
Koneenrakennus ja lujat teräksetASM Finland ry:n kevätseminaari2.4.2014 Taitotalo, Helsinki
www.tut.fi/mol
TAMPERE WEAR CENTER