Tanga DX200The light-weight power pack for the clean removal of windows

Tanga applicationsCuts using the rabbet stop

NEW1700W

, 70mm

cutting depth

,

reduced weig

ht

No damage to the reveal with the Tanga DX200:- Clean separation of the old window frame from the surrounding walls

- No subsequent plastering or painting required

- Minimal dust and dirt

- Faster, less expensive renovation

- Shorter over-all renovation time

- Greater working comfort

with Tanga DX200

without Tanga DX200

180

70mm

Benefits at a glance:

Corner cuts Rotating the base plate cover allows

for corner and length cuts

- 900 g

1700W

70mm

Long lifetimeSmooth-running, dust-removing

column guide for optimal operating

safety and a long product lifetime

Easy to handle Incorporates maximum cutting

depth and power in a small, easy

to use tool

Cutting depthUnparalleled cutting

depth of 70 mm for

clean window removal

Whats new?

900g lighter

Weight reduced from

5.4 kg to 4.5 kg.

Ideal for overhead work

Only one

base plate cover

The same base plate

cover for longitudinal

and corner cutting

Quick clamping

system

Faster changing of tools

without losing screws

Ergonomics

Large handle and small

motor for effective

machine guidance

Rotating the base

plate cover

Now with spring

loaded balls to allow

for smoother sliding

Corner dust

protection

Clip-on dust and work

protection for corner

cuts

Height adjustment

Available as an

accessory for adjusting

the cutting height

Now with

quick clamp

ing

system

Driving pins

Now with

quick clamp

ing

system

Art

.No.

981

5020

EN

Due to the screwless quick clamping system:- Tools can be changed faster

- No lost screws, and screws are inserted straight

- No screws that cannot be loosened due to dirt or dust

- Driving pins also prevent the clamping flange from jamming

Tanga applicationsCuts into the reveal

Straight cut, 60 mm deepTurn base plate cover 180

and clip on the corner dust

protection

Cut into the corner

The powerful diamond allows for cuts into the surrounding masonry, tiles or the windowsill. The base plate cover, which rotates 180, also enables users to cut into the corner to cut the window completely free. Metal mounting brackets located in the masonry can also be cut. The optional height adjustment allows the cutting position to be adjusted precisely for new, thicker windows awaiting installation.

Tanga applicationsCuts into the reveal

Tanga applicationsCuts into wooden framesThe 24-tooth saw blade is just as effective as one with twelve teeth, but features a longer lifetime. The window can be removed quickly by cutting into the wooden frame. Suitable tools are also available for aluminium or plastic windows. Even windows with thicknesses of over 70 mm can be cut by using the machine at an angle.

Straight cut for 70 mm

thick frames

Tip: Hold the machine at

a slight angle to prevent

scratches

Angled cut for frames thicker

than 70 mm

Tanga applicationsCuts using the rabbet stop

Place the machine in the

rabbet and cut into the

wooden frame

Place the machine in the

rabbet and cut into the

masonry

Narrow rabbet stop for

maximum cutting length

If the window has been installed flush with the wall, the cut can be executed at the correct position using the optional rabbet stop. Placement in the rabbet enables cuts into the wooden frame using a saw blade, or into the masonry using a diamond blade.

The new Tanga DX200 is a powerful yet compact machine that we use on a daily basis!

Jrn Mrohs, installation service, rekord Fenster und Tren

Tanga DX200 for window removals .... Art.No. 111570D Diamond blade 180 mm, corner dust protection, toolkit, in systainer

Tanga DX200 for window removals, with rabbet stop .................................. Art.No. 111570F Diamond blade 180 mm, saw blade 200 mm, Z24, rabbet stop, corner dust protection toolkit, in systainer

Diamond blade 180 mm .....................Art.No. 132530 for cutting depths of up to 60 mm. Cuts concrete, brick, plaster or tiles. With very high cutting performance

Diamond blade 200 mm .....................Art.No. 132531 for cutting depths of up to 70 mm. Cuts concrete, brick, plaster or tiles. Diamond blade

Diamond blade 200 mm for plastic windows ...................................Art.No. 132532 or cutting depths of up to 70mm. Cuts plastic frames with steel frame reinforcement

Saw blade, Z12, 200 mm ..................... Art.No. 132330 Z12, 200 mm for cutting depths of up to 70 mm. Cuts into wooden frames

Saw blade, Z24, 200 mm ..................... Art.No. 132331 For cutting depths of up to 70 mm. Cuts into wooden frames. Very high cutting performance and increased lifetime with 24 teeth

Saw blade, Z32, 200 mm ..................... Art.No. 132332 For cutting depths of up to 70 mm. Cuts into aluminium frames

Rabbet stop 0 to 50 mm .........................Art.No. 121564 For placement in the rabbet instead of on the reveal or the frame surface. Ideal for situations where the window is flush with the wall

Height adjustment 0 to 50 mm ..............Art.No. 121565 Allows the cutting height to be adjusted depending on the application

Art.No. 132530

Art.No. 132531

Art.No. 132532

Art.No. 132330

Art.No. 132332

Art.No. 132331

Art.No 121564

Art.No. 121565

Art

.No.

981

5020

EN

Manufacturer:Lamello AGJoining technologyinfo@lamello.comwww.lamello.com