tc close coupled pumps - cpi technology - tc closed... · burgmann mg12 single bellows mechanical...
TRANSCRIPT
Rev
2 d
ated
10/
9/20
02
Applications • Water supply • Cooling water • Air conditioning • Heating circulation • Industrial liquids and chemicals • Seawater • Oils, solvents and process liquids • Drinking and potable water • Aqua-culture • Electrophoretic paint Operating data Flow rates up to 300 l/sec Head up to 160 metres Temperature –200C to +1300C Construction Close coupled horizontal single stage end-suction pump with performance and key dimensions in accor-dance with DIN 24255 standard. The back-pull-out construction allows the pump to be dismantled without disturbing the suction and discharge pipework. Impel-lers are fully shrouded closed design, with double cur-vature vanes for optimum efficiency and good suction performance. Vortex design semi-open impellers are also available on some sizes. Electric motors Apex TC pumps are supplied with a TEFC IP55 electric motor. Alternative motors including Eexd flameproof motors are readily available.
Materials The pump pressure containing parts are cast in a variety of materials, selected to suit the working pressure of the pump, and to be compatible with the liquid being handled. Available materials are: • Cast iron • Ductile iron • Cast 316 Stainless steel • Cast bronze • Cast steel • Specialist steels eg Duplex, Hastalloy Flanges Standard flanges are drilled to the British Standard BS4504, with pressure rating to suit the specific appli-cation: BS4504 PN16 16 bar working pressure BS4504 PN25 25 bar working pressure BS4504 PN40 40 bar working pressure ANSI standard flanges drilled to 150 lb or 300 lb rat-ings and all other standards are available on request. Seals The standard arrangement is a single mechanical seal. Double seals, cartridge seals and packed gland seals can be fitted to suit the application and to meet customers’ preferences.
TC Close coupled Pumps
One of the broadest ranges of pumps available from any British manufacturer, with discharge sizes from 32 mm to 250 mm. Widest choice of materials of construction and op-tions to suit many industrial and building services specific requirements. Stainless steel pumps built from stock components. Competitively priced and manufactured from com-ponents held in stock, with reliable prompt deliver-ies. Capable of handling clean water, seawater, sol-vents, chemicals and other liquids with similar prop-erties. All pumps are manufactured strictly to ISO 9001 quality control standards
1 APEXPUMPS
Several thousand TC pumps are operating daily throughout the country and worldwide.
APEXPUMPS
2
New Features of the TC pump range
More sizes….
New sizes are continually being added to the range, and with the recent introduction of the 200 mm and 250 mm discharge size pumps, and with motor pow-ers up to 160 kW, the TC pump range is one of the most comprehensive ranges of close coupled pumps available from any pump manufacturer today. Now also available in In-Line Vertical configuration.
….Benefit
Greater choice results in a better hydraulic selection, optimised operating efficiency and lower power con-sumption. Now with 42 pump sizes to the Apex TC range, a cost-effective and properly engineered solu-tion can be provided for most industrial pumping ap-plications.
Larger stock….
Our policy of stocking large quantities of finished machined component parts, ready for immediate assembly, enables us to provide a fast delivery of complete pumps and spare parts, and has earned the company its good reputation for reliable delivery.
….Benefit
Quick delivery is appreciated by users and pump distributors alike, and makes Apex Pumps the first choice for replacement of existing pumps of other makes.
Wide Choice of options….
Virtually any mechanical seal, cartridge seal or packed gland arrangement, with flush, quench or independent circulation system is possible with the Apex TC pump range. Modular construction enables the pump to be engineered using standard stock components wherever possible, and our in-house CNC machining facilities can quickly produce any special parts against tight deadlines.
….Benefit
Pump users benefit by the broad engineering experi-ence at Apex, and our familiarity with difficult appli-cations and demanding duties.
Specialist materials….
Apex carry large stocks of cast stainless steel pump components, and operate fast-track manufacture of specialist materials such as Duplex stainless steel and Hastalloy, backed by full materials certification and traceability.
….Benefit
Industrial applications are increasingly specifying stainless steel pump materials in recognition of the environmental and economic benefits. Apex Pump’s investment in stainless steel stock parts, provides users with a standard pump to the highest specifica-tions.
Higher Pressures….
Pumps required to operate in tall buildings, and in certain industrial processes, need to operate at high working pressures. For these applications, Apex Pumps offer the TC range of close coupled pumps in cast steel, with flanges to BS4504 PN40.
….Benefit
The TC pump in cast steel provides a cost effective solution to what would otherwise be a specialist pump application. Many component parts will be shared with other TC pumps, providing spares inter-changeability throughout the site.
Competitive Prices….
As a specialist manufacturer of centrifugal pumps, all Apex products are designed to be highly competitive without compromise to quality and good engineering practice.
….Benefit
Apex fully supports its pump distributor network and customers by providing cost effective solutions to pumping problems.
Quality Control….
Every pump produced by Apex is manufactured strictly to ISO 9001 quality control procedures, and complies with the most rigorous documentary re-quirements of demanding customers.
….Benefit
The in-house engineering capability, attention to quality control and testing facilities make Apex the preferred choice for many high specification projects.
3
APEXPUMPS
200-250
60
100-400
80-315
ME
TR
ES
65-31540-315
50
40
30
80-400
50-315
2032-250
15
32-200
40-250 50-250 65-250 80-250
40-200
150-315125-315
150-400125-400 200-400 250-400
100-315
200-315
100-250
250-315
150-250
125-250
100-200
100-160
65-125
10
8
6
32-160
50-200 80-20065-200
40-160 50-160 80-16065-160
5
432-125
3
40-12550-125
125-200150-200
4
24 6 8 10 12
21.5 3
2515 20 30 40 50 7060 10080 120
5 6 108 2015 30
1200400M3/HR
150 200 300 700500 600 800 1000
6040 50 80 100L/SEC
150 250 300200
80-16032-160 40-160
150
40-12532-125
2
6
8
3
15
10
20
4 5 6
65-160
15
50-125
8 10 20 30
65-125
100-160
40 6050 10080 200
40-200
80
50
30
40
60
120
100
200
150
32-250
32-200
40-315
50-315
50-250
50-200
50-160
40-250
65-200
65-250
65-315
100-200
100-25080-250
80-200
125-200
1450 rpm
ME
TRE
S
2900 rpm
8 10 12 15 20 25 30 40 50 60 70 80 100 120 150 200 300 400 500 600M3/HR
L/SEC
TC range charts 50 hz
APEXPUMPS
4
Typical cross section: small TC pumps
Ref Item Standard material
Alternative materials
01 Volute casing Cast iron Ductile iron, bronze, 316 stainless steel 02 Impeller Cast iron Bronze, 316 stainless steel 03 Stubshaft 303 Stainless steel 316 stainless steel, Duplex stainless steel 05 Adaptor Cast iron Ductile iron, bronze, 316 stainless steel 07 Mechanical seal Carbon/ceramic/Nitrile Any commercial combination 08 Impeller nut Steel Bronze, 316 stainless steel 08.1 Impeller washer Steel Bronze, 316 stainless steel 10 Casing gasket Gasket paper 12 Casing wear ring Cast iron Bronze, 316 stainless steel 13 Impeller key Key steel 316 stainless steel 18 Support foot Mild steel 33 Motor sleeve Steel P1 Vent/gauge plug Steel 316 stainless steel P2 Suction gauge plug Steel 316 stainless steel P3 Drain plug Steel 316 stainless steel
07
P2
0808.1
13
18
12
P3
0210
0333
MOTOR
01P1
05
5
APEXPUMPS
01P1 12.1
0212.2
05
44
07
09
F5
F4
33
P3 P2 08 08.1 13 10.1 F1 F3 10.2 03 18
MOTOR
F2 F6
04
Typical cross section: Large TC pumps
Ref Item Standard material
Alternative materials
01 Volute casing Cast iron Ductile iron, bronze, 316 stainless steel 02 Impeller Cast iron Bronze, 316 stainless steel 03 Stubshaft 303 SS 316 stainless steel, Duplex stainless steel 04 Backcover Cast iron Ductile iron, bronze, 316 stainless steel 05 Adaptor Cast iron or Fabricated steel 07 Mechanical seal Carbon/Ceramic/Nitrile Any commercial combination 08 Impeller nut Steel Bronze, 316 stainless steel 08.1 Impeller nut washer Steel Bronze, 316 stainless steel 09 Glandplate Cast iron 316 stainless steel 10.1 Casing O ring Nitrile Viton 10.2 Glandplate O ring Nitrile Viton 12.1 Casing wear ring Cast iron Bronze, 316 stainless steel 12.2 Backcover wear ring Cast iron Bronze, 316 stainless steel 13 Impeller key Key steel 316 stainless steel 18 Motor foot Steel 33 Motor sleeve Steel 44 Seal spacer sleeve 303 SS 316 stainless steel F1 Casing bolts Steel 316 stainless steel F2 Motor flange bolts Steel F3 Gland studs Steel 316 stainless steel F4 Motor sleeve set screws Steel
F6 Motor foot bolts Steel P1 Casing vent plug Steel 316 stainless steel P2 Suction gauge plug Steel 316 stainless steel P3 Casing drain plug Steel 316 stainless steel
F5 Stubshaft socket set screws Steel 316 stainless steel
APEXPUMPS
6
Single bellows seal with secondarylip seal and quench connections. Usewhen crystaline solids may build up onthe outside of the seal, or when leakageof hazardous liquids needs to be pipedto a safe area.
Packed gland seal. Many differentclasses of gland packing are available.An internal flush connection from thepump discharge is provided as standard,or an external flush can be provided.
mechanical seal, used when the seal is
provides long seal life.design limits the seal face loading andsubjected to high pressure. The balanced
Burgmann type HJ92N balanced is available in a wide choice of materials
the action of agressive chemicals.including PTFE elastomers, to withstand
Burgmann type M7N chemical seal
seal has a higher working pressure than the
of face and elastomer materials, and capablestandard bellows seal. Available in a range
Burgmann MG12 single bellows mechanical
Burgmann Cartex SE single cartridge sealis the preferred choice for water authorityapplications and some process installations.The Cartex SO seal is similar, but withoutthe flush connection.
of accomodating large axial movement.
Examples of alternative sealing arrangements
7
APEXPUMPS
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
286050 32 12 bar TC 32-125
139
121
103
55
35 4044
50
50
45
130
112
48
48
53
53
6
8
10
12
14
16
18
20
22
24
26
0 1 2 3 4 5 6 7
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
.
1
2
3
0 1 2 3 4 5 6 7
N.P
.S.H
Met
res
139
121
103
130
112
0.0
0.5
1.0
1.5
2.0
0 1 2 3 4 5 6 7
Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
APEXPUMPS
8
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
288050 32 12 bar TC 32-160
174
152
130
58
33 39 4452
52
46
163
141
49
49
56
56
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
0 1 2 3 4 5 6 7 8
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
4
0 1 2 3 4 5 6 7 8
N.P
.S.H
Met
res
174
152
130
163
141
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
0 1 2 3 4 5 6 7 8Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
9
APEXPUMPS
50 32 12 bar TC 32-200
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
2900
214
190
166
53
35 4044
50
50
44
202
178
47
47
52
52
25
30
35
40
45
50
55
60
65
70
0 1 2 3 4 5 6 7 8 9
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
4
0 1 2 3 4 5 6 7 8 9
N.P
.S.H
Met
res
214
190
166
202
178
2
3
4
5
6
7
8
0 1 2 3 4 5 6 7 8 9Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
294050 32 12 bar TC 32-250
264
240
216
44
3236
39
42
42
40
252
228
41
41
43
43
50
60
70
80
90
100
110
0 1 2 3 4 5 6 7 8 9 10
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
.
0
2
4
6
8
0 1 2 3 4 5 6 7 8 9 10
N.P
.S.H
Met
res
264
240
216
252
228
4
6
8
10
12
14
16
18
0 1 2 3 4 5 6 7 8 9 10Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
APEXPUMPS
10
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
288065 40 12 bar TC 40-125
139
121
103
76
48 55 6170
70
61
130
112
65
65
74
74
8
10
12
14
16
18
20
22
24
26
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
4
5
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
N.P
.S.H
Met
res
139
121
103
130
112
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
11
APEXPUMPS
65 40 12 bar TC 40-160
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
2900
174
152
130
66
42 49 5361
61
54
163
141
57
57
64
64
10
15
20
25
30
35
40
45
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Tot
al H
ead
Met
res
Impe
ller
dia
mm
.
2
3
4
5
6
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
N.P
.S.H
Met
res
174
152
130
163
141
1
2
3
4
5
6
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
APEXPUMPS
12
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
290065 40 12 bar TC 40-200
214
192
170
61
45 5054
59
59
55
203
181
57
57
60
60
56
25
30
35
40
45
50
55
60
65
70
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Tot
al H
ead
Met
res
Impe
ller
dia
mm
2
3
4
5
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
N.P
.S.H
Met
res
214
192
170
203
181
1
2
3
4
5
6
7
8
9
10
11
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
13
APEXPUMPS
65 40 12 bar TC 40-250
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
2940
264
234
204
55
40 44 4852
52
44
249
219
50
50
53
53
47
30
40
50
60
70
80
90
100
0 2 4 6 8 10 12 14 16 18
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
2
3
4
5
0 2 4 6 8 10 12 14 16 18
N.P
.S.H
Met
res
264
234
204
249
219
4
6
8
10
12
14
16
18
20
22
24
0 2 4 6 8 10 12 14 16 18Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
APEXPUMPS
14
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
294065 40 16 bar TC 40-315
329
293
257
39.5
28 3235
38
38
36
311
275
37
37
39
39
60
70
80
90
100
110
120
130
140
150
160
170
0 1 2 3 4 5 6 7 8 9 10 11 12 13
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
.
3
4
5
6
7
0 1 2 3 4 5 6 7 8 9 10 11 12 13
N.P
.S.H
Met
res
329
293
257
311
275
5
10
15
20
25
30
35
0 1 2 3 4 5 6 7 8 9 10 11 12 13Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
15
APEXPUMPS
65 50 12 bar TC 50-125
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
2900
139
125
111
76
58 6570
74
74
71
132
118
72
72
75
75
10
12
14
16
18
20
22
24
26
28
0 2 4 6 8 10 12 14 16 18 20 22 24
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
2
3
4
5
6
0 2 4 6 8 10 12 14 16 18 20 22 24
N.P
.S.H
Met
res
139
125
111
132
118
1
2
3
4
5
6
0 2 4 6 8 10 12 14 16 18 20 22 24Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
APEXPUMPS
16
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
290065 50 12 bar TC 50-160
174
156
138
76
6067
71
75
75
72
165
147
73
73
76
76
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
.
2
4
6
8
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28
N.P
.S.H
Met
res
174
156
138
165
147
1
2
3
4
5
6
7
8
9
10
11
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
17
APEXPUMPS
65 50 12 bar TC 50-200
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
2940
214
192
170
68
55 59 62
66
66
62
203
181
64
64
67
67
25
30
35
40
45
50
55
60
65
70
0 2 4 6 8 10 12 14 16 18 20 22 24
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
.
2
4
6
0 2 4 6 8 10 12 14 16 18 20 22 24
N.P
.S.H
Met
res
214
192
170
203
181
2
4
6
8
10
12
14
16
0 2 4 6 8 10 12 14 16 18 20 22 24Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
APEXPUMPS
18
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
294065 50 12 bar TC 50-250
264
236
208
63
46 51 55
60
60
55
250
222
58
58
62
62
40
45
50
55
60
65
70
75
80
85
90
95
100
105
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
.
2
4
6
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28
N.P
.S.H
Met
res
264
236
208
250
222
5
10
15
20
25
30
35
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
19
APEXPUMPS
65 50 12 bar TC 50-315
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
2965
329
297
265
313
281
10
20
30
40
50
60
70
0 5 10 15 20 25 30 35 40
Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
329
297
265
64
48 53 57
62
62
59
313
281
60
60
63
63
70
80
90
100
110
120
130
140
150
160
0 5 10 15 20 25 30 35 40
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
5
6
7
8
0 5 10 15 20 25 30 35 40
N.P
.S.H
Met
res
APEXPUMPS
20
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
290080 65 12 bar TC 65-125
139
131
123
76
6065
69
73
73
68
135
127
71
71
74
74
70
12
14
16
18
20
22
24
26
0 5 10 15 20 25 30 35 40
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
2
3
4
5
6
0 5 10 15 20 25 30 35 40
N.P
.S.H
Met
res
139
131
123
135
127
2
3
4
5
6
7
8
0 5 10 15 20 25 30 35 40
Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
21
APEXPUMPS
80 65 12 bar TC 65-160
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
2900
174
154
134
80
52 61 67
75
75
68
164
144
71
71
78
78
10
15
20
25
30
35
40
45
0 10 20 30 40 50
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
2
4
6
8
0 10 20 30 40 50
N.P
.S.H
Met
res
174
154
134
164
144
2
4
6
8
10
12
14
16
0 10 20 30 40 50Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
APEXPUMPS
22
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
294080 65 12 bar TC 65-200
214
190
166
77
6066
70
74
74
69
202
178
72
72
76
76
25
30
35
40
45
50
55
60
65
70
0 10 20 30 40 50
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
2
4
6
8
10
0 10 20 30 40 50
N.P
.S.H
Met
res
214
190
166
202
178
0
5
10
15
20
25
30
35
0 10 20 30 40 50Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
23
APEXPUMPS
80 65 12 bar TC 65-250
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
2965
264
236
208
76
60 6569
74
74
71
250
222
72
72
75
75
40
50
60
70
80
90
100
110
0 10 20 30 40 50
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
0
2
4
6
8
10
0 10 20 30 40 50
N.P
.S.H
Met
res
264
236
208
250
222
5
10
15
20
25
30
35
40
45
50
0 10 20 30 40 50Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
APEXPUMPS
24
80 65 16 bar TC 65-315
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
2970
329
297
265
64
51 55 58
62
62
59
313
281
60
6063
63
70
80
90
100
110
120
130
140
150
160
0 10 20 30 40 50
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
2
4
6
8
0 10 20 30 40 50
N.P
.S.H
Met
res
329
297
265
313
281
20
30
40
50
60
70
80
90
100
0 10 20 30 40 50Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
25
APEXPUMPS
100 80 12 bar TC 80-160
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
2940
174
162
150
83
6369
74
79
79
73
168
156
77
77
81
81
75
18
20
22
24
26
28
30
32
34
36
38
40
42
0 10 20 30 40 50 60 70 80
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
2
4
6
8
0 10 20 30 40 50 60 70 80
N.P
.S.H
Met
res
174
162
150
168
156
5
10
15
20
25
0 10 20 30 40 50 60 70 80
Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
APEXPUMPS
26
100 80 12 bar TC 80-200
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
2965
214
194
174
79
6067
72
77
77
71
204
184
75
75
78
78
73
30
35
40
45
50
55
60
65
70
0 10 20 30 40 50 60 70
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
2
4
6
8
0 10 20 30 40 50 60 70
N.P
.S.H
Met
res
214
194
174
204
184
5
10
15
20
25
30
35
40
45
50
0 10 20 30 40 50 60 70
Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
27
APEXPUMPS
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
2965100 80 12 bar TC 80-250
264
240
216
79
6069
74
77
77
74
252
228
76
76
78
78
75
45
50
55
60
65
70
75
80
85
90
95
100
105
0 10 20 30 40 50 60 70 80
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
2
4
6
8
10
0 10 20 30 40 50 60 70 80
N.P
.S.H
Met
res
264
240
216
252
228
10
20
30
40
50
60
70
80
0 10 20 30 40 50 60 70 80
Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
APEXPUMPS
28
125 100 12 bar TC 100-160
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
2940
174
164
154
169
159
10
15
20
25
30
0 10 20 30 40 50 60 70 80 90 100 110
Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
174
164
154
71
5761
64
68
68
61
169
159
66
66
70
70
64
10
15
20
25
30
35
0 10 20 30 40 50 60 70 80 90 100 110
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
4
5
6
7
0 10 20 30 40 50 60 70 80 90 100 110
N.P
.S.H
Met
res
29
APEXPUMPS
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
2965125 100 12 bar TC 100-200
214
198
182
80
6570
74
78
78
74
206
190
76
76
79
79
30
35
40
45
50
55
60
65
70
0 10 20 30 40 50 60 70 80 90 100 110
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
2
4
6
8
0 10 20 30 40 50 60 70 80 90 100 110
N.P
.S.H
Met
res
214
198
182
206
190
10
20
30
40
50
60
0 10 20 30 40 50 60 70 80 90 100 110
Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
APEXPUMPS
30
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
2970125 100 12 bar TC 100-250
264
240
216
83
7075
78
81
81
78
252
228
80
82
82
79
45
50
55
60
65
70
75
80
85
90
95
100
105
110
0 10 20 30 40 50 60 70 80 90 100 110 120
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
2
4
6
8
10
0 10 20 30 40 50 60 70 80 90 100 110 120
N.P
.S.H
Met
res
264
240
216
252
228
20
30
40
50
60
70
80
90
100
110
0 10 20 30 40 50 60 70 80 90 100 110 120
Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
31
APEXPUMPS
150 125 12 bar TC 125-200
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
2970
214
204
19472
6064
67
70
70
67
209
199
69
69
71
71
68
25
30
35
40
45
50
55
60
65
0 20 40 60 80 100 120 140 160
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
6
7
8
9
0 20 40 60 80 100 120 140 160
N.P
.S.H
Met
res
214
204
194
209
199
40
50
60
70
80
0 20 40 60 80 100 120 140 160
Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
APEXPUMPS
32
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
141050 32 12 bar TC 32-125
139
121
103
130
112
0.05
0.10
0.15
0.20
0.25
0.30
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
121
103
48
30 34 37
43
43
37
130
112
40
40
46
46
139
1
2
3
4
5
6
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
0
1
2
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5
N.P
.S.H
Met
res
33
APEXPUMPS
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
141050 32 12 bar TC 32-160
174
152
130
163
141
0.05
0.10
0.15
0.20
0.25
0.30
0.35
0.40
0.45
0.50
0.55
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
152
130
49
28 34 39
46
46
39
163
141 43
43
48
48
174
3
4
5
6
7
8
9
10
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
0
1
2
3
4
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
N.P
.S.H
Met
res
APEXPUMPS
34
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
141050 32 12 bar TC 32-200
214
190
166
202
178
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
190
166
51
36 4044
47
47
44
202
178
49
49
214
5
6
7
8
9
10
11
12
13
14
15
16
17
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
N.P
.S.H
Met
res
35
APEXPUMPS
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
142050 32 12 bar TC 32-250
264
236
208
250
222
0.5
1.0
1.5
2.0
0 1 2 3 4 5 6Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
236
208
42
29 3337
33
250
222
41
41
37
40
40
264
8
10
12
14
16
18
20
22
24
26
0 1 2 3 4 5 6
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
4
5
0 1 2 3 4 5 6
N.P
.S.H
Met
res
APEXPUMPS
36
65 40 12 bar TC 40-125
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1410
139
125
111
132
118
0.05
0.10
0.15
0.20
0.25
0.30
0.35
0.40
0.45
0.50
0 1 2 3 4 5 6 7 8Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
125
111
68
40 5058
60
132
11864
64
66
66
139
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
0 1 2 3 4 5 6 7 8
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
0
1
2
3
0 1 2 3 4 5 6 7 8
N.P
.S.H
Met
res
37
APEXPUMPS
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
141065 40 12 bar TC 40-160
174
154
134
164
144
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0 1 2 3 4 5 6Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
154
134
62
40 4552
58
58
53
164
144
55
5560
60
174
3
4
5
6
7
8
9
10
11
0 1 2 3 4 5 6
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
0
1
2
3
0 1 2 3 4 5 6
N.P
.S.H
Met
res
APEXPUMPS
38
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
142065 40 12 bar TC 40-200
214
190
166
202
178
0.2
0.4
0.6
0.8
1.0
1.2
1.4
0 1 2 3 4 5 6 7Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
190
166
56
41 4650
54
54
50
202
178
52
52
55
55
214
6
7
8
9
10
11
12
13
14
15
16
17
0 1 2 3 4 5 6 7
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
0 1 2 3 4 5 6 7
N.P
.S.H
Met
res
39
APEXPUMPS
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
142065 40 12 bar TC 40-250
264
236
208
250
222
0.5
1.0
1.5
2.0
2.5
3.0
0 1 2 3 4 5 6 7 8 9Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
236
208
52
40 4346
50
50
46
250
222
49
49
51
51
47
264
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
0 1 2 3 4 5 6 7 8 9
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
4
0 1 2 3 4 5 6 7 8 9
N.P
.S.H
Met
res
APEXPUMPS
40
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
145065 40 12 bar TC 40-315
329
293
257
311
275
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
0 1 2 3 4 5 6Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
293
257
38
27 30 3336
36
33
311
275
35
35
37
37
34
329
14
16
18
20
22
24
26
28
30
32
34
36
38
40
0 1 2 3 4 5 6
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
2
3
4
0 1 2 3 4 5 6
N.P
.S.H
Met
res
41
APEXPUMPS
65 50 12 bar TC 50-125
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1410
139
131
123
135
127
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0 1 2 3 4 5 6 7 8 9 10 11 12Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
131
123
76
50 5868
62
135
127
72
72
74
74
68
139
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
0 1 2 3 4 5 6 7 8 9 10 11 12
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
4
0 1 2 3 4 5 6 7 8 9 10 11 12
N.P
.S.H
Met
res
APEXPUMPS
42
65 50 12 bar TC 50-160
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1420
174
156
138
165
147
0.2
0.4
0.6
0.8
1.0
1.2
1.4
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
156
138
75
53 60 6672
72
68
165
147
70
70
74
74
174
4
5
6
7
8
9
10
11
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
4
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
N.P
.S.H
Met
res
43
APEXPUMPS
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
142065 50 12 bar TC 50-200
214
190
166
202
178
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
0 1 2 3 4 5 6 7 8 9 10 11 12 13
Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
214
190
166
65
5055
59
63
63
58
202
178
62
62
64
64
60
5
6
7
8
9
10
11
12
13
14
15
16
0 1 2 3 4 5 6 7 8 9 10 11 12 13
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
4
0 1 2 3 4 5 6 7 8 9 10 11 12 13
N.P
.S.H
Met
res
APEXPUMPS
44
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
144065 50 12 bar TC 50-250
264
236
208
250
222
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
264
236
208
64
52 5659
62
62
57
250
222
61
61
63
63
59
10
12
14
16
18
20
22
24
26
28
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
4
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
N.P
.S.H
Met
res
45
APEXPUMPS
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
145065 50 12 bar TC 50-315
329
293
257
311
275
1
2
3
4
5
6
7
8
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
329
293
257
64
50 54 5761
61
57
311
27560
60
62
62
14
16
18
20
22
24
26
28
30
32
34
36
38
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
N.P
.S.H
Met
res
APEXPUMPS
46
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
142080 65 12 bar TC 65-125
139
133
127
136
130
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
133
127
69
5862
6567
67
65
136
13068
68
66
139
4.0
4.5
5.0
5.5
6.0
6.5
7.0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
N.P
.S.H
Met
res
47
APEXPUMPS
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
142080 65 12 bar TC 65-160
174
160
146
167
153
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
0 2 4 6 8 10 12 14 16 18 20 22 24Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
160
146
81
6068
7377
77
70
167
153 79
79
73
174
4
5
6
7
8
9
10
11
0 2 4 6 8 10 12 14 16 18 20 22 24
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
0 2 4 6 8 10 12 14 16 18 20 22 24
N.P
.S.H
Met
res
APEXPUMPS
48
49
APEXPUMPS
80 65 12 bar TC 65-200
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1440
214
190
166
202
178
0
1
2
3
4
0 2 4 6 8 10 12 14 16 18 20 22 24 26
Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
214
190
166
78
60 6571
76
76
71
202
178
74
74
77
77
5
6
7
8
9
10
11
12
13
14
15
16
17
0 2 4 6 8 10 12 14 16 18 20 22 24 26
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
4
0 2 4 6 8 10 12 14 16 18 20 22 24 26
N.P
.S.H
Met
res
80 65 12 bar TC 65-250
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1450
264
236
208
250
222
1
2
3
4
5
6
7
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28
Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
264
236
208
76
60 6569
73
73
66
250
222
71
71
75
75
69
10
12
14
16
18
20
22
24
26
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
2
3
4
5
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28
N.P
.S.H
Met
res
APEXPUMPS
50
80 65 12 bar TC 65-315
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1450
329
293
257
311
275
2
3
4
5
6
7
8
9
10
11
0 2 4 6 8 10 12 14 16 18 20 22 24 26Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
329
293
257
65
50 55 5963
63
57
311
275
62
62
64
64
60
14
16
18
20
22
24
26
28
30
32
34
36
38
40
0 2 4 6 8 10 12 14 16 18 20 22 24 26
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
0
1
2
3
0 2 4 6 8 10 12 14 16 18 20 22 24 26
N.P
.S.H
Met
res
51
APEXPUMPS
100 80 12 bar TC 80-160
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1420
174
160
146
167
153
0.5
1.0
1.5
2.0
2.5
3.0
0 5 10 15 20 25 30 35Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
174
160
146
79
65 7074
77
77
73
167
153
76
76
78
78
75
4
5
6
7
8
9
10
0 5 10 15 20 25 30 35
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
2
3
4
5
0 5 10 15 20 25 30 35
N.P
.S.H
Met
res
APEXPUMPS
52
100 80 12 bar TC 80-200
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1450
214
190
166
202
178
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
0 5 10 15 20 25 30 35 40Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
214
190
166
81
65 70 74
79
79
75
202
178
77
77
80
80
6
7
8
9
10
11
12
13
14
15
16
17
0 5 10 15 20 25 30 35 40
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
2
3
4
0 5 10 15 20 25 30 35 40
N.P
.S.H
Met
res
53
APEXPUMPS
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1450100 80 12 bar TC 80-250
264
236
208
250
222
1
2
3
4
5
6
7
8
9
0 5 10 15 20 25 30 35 40Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
264
236
208
74
60 6568
72
72
68
250
222
70
70
73
73
10
12
14
16
18
20
22
24
26
0 5 10 15 20 25 30 35 40
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
2
3
4
0 5 10 15 20 25 30 35 40
N.P
.S.H
Met
res
APEXPUMPS
54
55
APEXPUMPS
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1470100 80 12 bar TC 80-315
329
293
257
311
275
2
4
6
8
10
12
14
16
0 5 10 15 20 25 30 35 40Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
329
293
257
74
60 65 68
72
72
68
311
275
70
70
73
73
15
20
25
30
35
40
0 5 10 15 20 25 30 35 40
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
4
0 5 10 15 20 25 30 35 40
N.P
.S.H
Met
res
APEXPUMPS
56
100 80 12 bar TC 80-400
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1475
409
365
321
387
343
5
10
15
20
25
30
0 5 10 15 20 25 30 35 40 45Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
409
365
321
67
50 56 6064
64
58
387
343
62
62
66
66
60
20
25
30
35
40
45
50
55
60
65
0 5 10 15 20 25 30 35 40 45
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
4
0 5 10 15 20 25 30 35 40 45
N.P
.S.H
Met
res
57
APEXPUMPS
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1440125 100 12 bar TC 100-160
174
164
154
169
159
1.0
1.5
2.0
2.5
3.0
3.5
0 10 20 30 40 50
Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
174
164
154
71
5660
63
68
68
60
169
159
66
66
69
69
63
3
4
5
6
7
8
9
0 10 20 30 40 50
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
4
0 10 20 30 40 50
N.P
.S.H
Met
res
APEXPUMPS
58
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1450125 100 12 bar TC 100-200
214
194
174
204
184
1
2
3
4
5
6
7
8
0 10 20 30 40 50 60Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
214
194
174
79
66 70 72
76
76
70
204
184
74
74
77
77
72
6
7
8
9
10
11
12
13
14
15
16
17
0 10 20 30 40 50 60
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
4
0 10 20 30 40 50 60
N.P
.S.H
Met
res
125 100 16 bar TC 100-250
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1470
264
236
208
250
222
2
4
6
8
10
12
14
0 10 20 30 40 50 60Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
264
236
208
81
6069
74
79
79
74
250
222
77
77
80
80
10
12
14
16
18
20
22
24
26
28
0 10 20 30 40 50 60
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
4
0 10 20 30 40 50 60
N.P
.S.H
Met
res
59
APEXPUMPS
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1470125 100 12 bar TC 100-315
329
293
257
311
275
0
5
10
15
20
0 10 20 30 40 50Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
329
293
257
75
55 62 6873
73
69
311
275
71
71
74
74
70
16
18
20
22
24
26
28
30
32
34
36
38
40
0 10 20 30 40 50
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
0 10 20 30 40 50
N.P
.S.H
Met
res
APEXPUMPS
60
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1475125 100 12 bar TC 100-400
409
365
321
387
343
5
10
15
20
25
30
35
40
0 10 20 30 40 50 60Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
409
365
321
68
50 55 5864
64
58
387
343
61
61
66
66
25
30
35
40
45
50
55
60
65
0 10 20 30 40 50 60
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
2
3
4
5
0 10 20 30 40 50 60
N.P
.S.H
Met
res
61
APEXPUMPS
APEXPUMPS
62
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1450150 125 12 bar TC 125-200
214
202
190
208
196
3
4
5
6
7
8
9
10
11
0 10 20 30 40 50 60 70Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
214
202
190
75
5563 67
72
72
66
208
196
70
70
74
74
68
7
8
9
10
11
12
13
14
15
16
0 10 20 30 40 50 60 70
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
4
0 10 20 30 40 50 60 70
N.P
.S.H
Met
res
150 125 12 bar TC125-250
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1470
264
236
208
250
222
2
4
6
8
10
12
14
16
18
20
0 10 20 30 40 50 60 70 80 90Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
264
236
208
81
60 67 72
78
78
69
250
222
75
75
80
80
72
8
10
12
14
16
18
20
22
24
26
0 10 20 30 40 50 60 70 80 90
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
0
2
4
6
8
0 10 20 30 40 50 60 70 80 90
N.P
.S.H
Met
res
63
APEXPUMPS
150 125 12 bar TC125-315
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1475
329
293
257
311
275
4
6
8
10
12
14
16
18
20
22
24
26
28
0 10 20 30 40 50 60 70 80Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
329
293
257
78
6066
70
75
75
70
311
275
73
73
76
76
14
16
18
20
22
24
26
28
30
32
34
36
38
40
0 10 20 30 40 50 60 70 80
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
4
5
0 10 20 30 40 50 60 70 80
N.P
.S.H
Met
res
APEXPUMPS
64
65
APEXPUMPS
150 125 12 bar TC 125-400
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1475
409
369
329
389
349
5
10
15
20
25
30
35
40
45
50
55
0 10 20 30 40 50 60 70 80 90Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
409
369
329
77
58 64 6874
74
69
389
349
71
71
76
76
25
30
35
40
45
50
55
60
0 10 20 30 40 50 60 70 80 90
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
4
5
0 10 20 30 40 50 60 70 80 90
N.P
.S.H
Met
res
200 150 12 bar TC 150-200
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1470
220
206
192
213
199
4
6
8
10
12
14
16
18
0 20 40 60 80 100 120 140
Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
220
206
192
78
62 6771
75
75
68
213
199
73
73
76
76
71
6
7
8
9
10
11
12
13
14
15
0 20 40 60 80 100 120 140
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
2
3
4
5
6
0 20 40 60 80 100 120 140
N.P
.S.H
Met
res
APEXPUMPS
66
200 150 12 bar TC150-250
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1475
264
248
232
256
240
6
8
10
12
14
16
18
20
22
24
26
28
0 20 40 60 80 100 120Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
264
248
232
81
62 68 7378
78
71
256
240
76
76
80
80
74
13
14
15
16
17
18
19
20
21
22
23
24
25
0 20 40 60 80 100 120
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
4
5
0 20 40 60 80 100 120
N.P
.S.H
Met
res
67
APEXPUMPS
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1475200 150 12 bar TC 150-315
329
293
257
311
275
5
10
15
20
25
30
35
40
45
50
0 20 40 60 80 100 120 140Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
329
293
257
81
62 68 7378
78
71
311
275
76
76
80
80
74
14
16
18
20
22
24
26
28
30
32
34
36
38
0 20 40 60 80 100 120 140
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
4
5
0 20 40 60 80 100 120 140
N.P
.S.H
Met
res
APEXPUMPS
68
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1475200 150 12 bar TC150-400
409
365
321
387
343
10
20
30
40
50
60
70
80
0 20 40 60 80 100 120 140 160
Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
409
365
321
81
62 68 7378
78
73
387
343
76
76
80
80
75
20
30
40
50
60
0 20 40 60 80 100 120 140 160
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
4
5
0 20 40 60 80 100 120 140 160
N.P
.S.H
Met
res
69
APEXPUMPS
APEXPUMPS
70
250 200 12 bar TC 200-250
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1475
264
250
236
257
243
15
20
25
30
35
40
45
50
0 20 40 60 80 100 120 140 160 180 200 220 240 260Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
264
250
236
80
60 65 70
76
76
70
257
243
74
74
78
78
72
10
12
14
16
18
20
22
0 20 40 60 80 100 120 140 160 180 200 220 240 260
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
2
3
4
5
0 20 40 60 80 100 120 140 160 180 200 220 240 260
N.P
.S.H
Met
res
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1475250 200 12 bar TC 200-315
329
307
285
318
296
20
30
40
50
60
0 20 40 60 80 100 120 140 160 180 200 220 240Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
329
307
285
83
64 6974
79
79
69
318
296
77
77
81
81
74
10
12
14
16
18
20
22
24
26
28
30
32
34
36
0 20 40 60 80 100 120 140 160 180 200 220 240
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
2
3
4
5
6
0 20 40 60 80 100 120 140 160 180 200 220 240
N.P
.S.H
Met
res
71
APEXPUMPS
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1480250 200 12 bar TC 200-400
409
373
337
355
391
20
30
40
50
60
70
80
90
100
110
120
0 20 40 60 80 100 120 140 160 180 200 220 240
Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
409
373
337
86.3
70 75 78
83
83
74
85
85
78
81
81
391
355
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
0 20 40 60 80 100 120 140 160 180 200 220 240
Tot
al H
ead
Met
res
Impe
ller
dia
mm
.
2
3
4
5
0 20 40 60 80 100 120 140 160 180 200 220 240
N.P
.S.H
Met
res
APEXPUMPS
72
300 250 12 bar TC 250-315
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1475
329
307
285
318
296
25
30
35
40
45
50
55
60
65
70
75
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
329
307
285
87.4
68 74 7984
84
75
318
296
82
82
86
86
79
12
14
16
18
20
22
24
26
28
30
32
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
3
4
5
6
7
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
N.P
.S.H
Met
res
73
APEXPUMPS
Issue 1.4HORIZONTAL CLOSE COUPLEDPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1480300 250 12 bar TC 250-400
409
383
357
396
370
40
60
80
100
120
140
160
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300 320Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
409
383
357
87.5
68 74 7984
84
396
370
82
86
86
30
32
34
36
38
40
42
44
46
48
50
52
54
56
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300 320
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
3
4
5
6
7
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300 320
N.P
.S.H
Met
res
APEXPUMPS
74
Outline dimensions Apex TC pumpsets
Use dimension F1 for pumps with cast iron body and single mechanical seal. Terminal box may be top or side For indication only. Certified For stainless steel pumps and pumps with double mechanical seal, refer to Apex. mounted depending on motor make. drawings available on request
4 HOLES S2Ø4 HOLES S1ØB1
B2
H2
H1
M2
M1
A F1 Lm W
C B
BB
B4
B3
(see note)
(see note)
PUMP MOTOR FLANGES PUMP DIMENSIONS MOTOR DIMENSIONS MODEL FRAME IN OUT A F1 H1 H2 B1 B2 M1 M2 W S1 B3 B4 Lm B BB C S2 KG 32-125 0.75/2 D80 50 32 80 170 112 140 140 190 100 70 100 14 207 189 255 100 125 50 10 36
32-125 1.1/2 D80 50 32 80 170 112 140 140 190 100 70 100 14 207 189 255 100 125 50 10 37
32-125 1.5/2 D90S 50 32 80 170 112 140 140 190 100 70 100 14 222 204 244 100 130 56 10 40 32-125 2.2/2 D90L 50 32 80 170 112 140 140 190 100 70 100 14 222 204 269 125 155 56 10 43
32-160 2.2/2 D90L 50 32 80 169 132 160 190 240 100 70 100 14 222 204 269 125 155 56 10 51 32-160 3.0/2 D100L 50 32 80 169 132 160 190 240 100 70 100 14 267 244 303 140 173 63 12 58 32-160 4.0/2 D112M 50 32 80 169 132 160 190 240 100 70 100 14 297 274 320 140 176 63 12 64 32-200 4.0/2 D112M 50 32 80 169 160 180 190 240 100 70 100 14 297 274 320 140 176 63 12 72 32-200 5.5/2 D132S 50 32 80 169 160 180 190 240 100 70 100 14 323 300 405 140 218 89 12 93 32-200 7.5/2 D132S 50 32 80 169 160 180 190 240 100 70 100 14 323 300 405 140 218 89 12 99 32-250 11/2 D160M 50 32 100 212 180 225 250 320 125 95 120 14 384 354 517 140 218 89 14 136 32-250 15/2 D160M 50 32 100 212 180 225 250 320 125 95 120 14 384 354 517 140 218 89 14 152 32-250 18.5/2 D160L 50 32 100 212 180 225 250 320 125 95 120 14 384 354 517 254 304 108 14 168 40-125 1.5/2 D90S 65 40 80 170 112 140 160 210 100 70 100 14 222 204 244 100 130 56 10 45 40-125 2.2/2 D90L 65 40 80 170 112 140 160 210 100 70 100 14 222 204 269 125 155 56 10 48 40-125 3.0/2 D100L 65 40 80 150 112 140 160 210 100 70 100 14 267 244 303 140 173 63 12 55 40-125 4.0/2 D112M 65 40 80 150 112 140 160 210 100 70 100 14 225 190 320 140 176 63 12 61 40-160 3.0/2 D100L 65 40 80 169 132 160 190 240 100 70 100 14 267 244 303 140 173 63 12 61 40-160 4.0/2 D112M 65 40 80 169 132 160 190 240 100 70 100 14 297 274 320 140 176 63 12 67 40-160 5.5/2 D132S 65 40 80 169 132 160 190 240 100 70 100 14 256 216 405 140 218 89 12 88 40-160 7.5/2 D132S 65 40 80 169 132 160 190 240 100 70 100 14 256 216 405 140 218 89 12 94 40-200 5.5/2 D132S 65 40 100 165 160 180 212 265 100 70 100 14 323 300 405 140 218 89 12 96 40-200 7.5/2 D132S 65 40 100 165 160 180 212 265 100 70 100 14 323 300 405 140 218 89 12 102 40-200 11/2 D160M 65 40 100 205 160 180 212 265 100 70 100 14 320 254 517 210 260 108 14 121 40-250 11/2 D160M 65 40 100 212 180 225 250 320 125 95 120 14 384 354 517 140 218 89 14 138 40-250 15/2 D160M 65 40 100 212 180 225 250 320 125 95 120 14 384 354 517 140 218 89 14 154 40-250 18.5/2 D160L 65 40 100 212 180 225 250 320 125 95 120 14 384 354 517 254 304 108 14 170 40-250 22/2 D180M 65 40 100 212 180 225 250 320 125 95 120 14 352 279 578 241 300 121 14 192 40-315 18.5/2 D160L 65 40 125 250 200 250 280 345 125 95 140 14 384 354 517 254 304 108 14 201 40-315 22/2 D180M 65 40 125 250 200 250 280 345 125 95 140 14 437 397 578 241 300 121 14 223 40-315 30/2 D200L 65 40 125 250 200 250 280 345 125 95 140 14 385 318 712 305 370 133 18 339 40-315 37/2 D200L 65 40 125 250 200 250 280 345 125 95 140 14 385 318 712 305 370 133 18 354 50-125 3.0/2 D100L 65 50 100 150 132 160 190 240 100 70 100 14 267 244 303 140 173 63 12 57 50-125 4.0/2 D112M 65 50 100 150 132 160 190 240 100 70 100 14 297 274 320 140 176 63 12 63 50-125 5.5/2 D132S 65 50 100 170 132 160 190 240 100 70 100 14 256 216 405 140 218 89 12 84 50-125 7.5/2 D132S 65 50 100 170 132 160 190 240 100 70 100 14 256 216 405 140 218 89 12 90
75
APEXPUMPS
Outline dimensions Apex TC pumpsets
4 HOLES S2Ø4 HOLES S1ØB1
B2
H2
H1
M2
M1
A F1 Lm W
C B
BB
B4
B3
(see note)
(see note)
PUMP MOTOR FLANGES PUMP DIMENSIONS MOTOR DIMENSIONS MODEL FRAME IN OUT A F1 H1 H2 B1 B2 M1 M2 W S1 B3 B4 Lm B BB C S2 KG 50-160 5.5/2 D132S 65 50 100 169 160 180 212 265 100 70 100 14 323 300 405 140 218 89 12 88 50-160 7.5/2 D132S 65 50 100 169 160 180 212 265 100 70 100 14 323 300 405 140 218 89 12 94 50-160 11.0/2 D160M 65 50 100 209 160 180 212 265 100 70 100 14 320 254 517 210 260 108 14 113 50-200 7.5/2 D132S 65 50 100 171 160 200 212 265 100 70 100 14 323 300 405 140 218 89 12 102 50-200 11.0/2 D160M 65 50 100 211 160 200 212 265 100 70 100 14 320 254 517 210 260 108 14 121 50-200 15.0/2 D160M 65 50 100 211 160 200 212 265 100 70 100 14 320 254 517 210 260 108 14 137 50-200 18.5/2 D160L 65 50 100 211 160 200 212 265 100 70 100 14 312 254 510 254 298 108 14 153 50-250 15/2 D160M 65 50 100 212 180 225 250 320 125 95 120 14 384 354 517 140 218 89 14 154 50-250 18.5/2 D160L 65 50 100 212 180 225 250 320 125 95 120 14 384 354 517 254 304 108 14 170 50-250 22/2 D180M 65 50 100 212 180 225 250 320 125 95 120 14 352 279 578 241 300 121 14 192 50/250 30/2 D200L 65 50 100 212 180 225 250 320 125 95 120 14 528 478 712 305 370 133 18 308 50-315 30/2 D200L 65 50 125 250 225 280 280 345 125 95 140 14 528 478 712 305 370 133 18 341 50-315 37/2 D200L 65 50 125 250 225 280 280 345 125 95 140 14 528 478 712 305 370 133 18 356 50-315 45./2 D225M 65 50 125 250 225 280 280 345 125 95 140 14 436 356 762 286 391 149 18 481 50-315 55/2 D250S 65 50 125 250 225 280 280 345 125 95 140 14 506 406 863 311 449 168 24 546 50-315 75/2 D250M 65 50 125 250 225 280 280 345 125 95 140 14 506 406 863 311 449 168 24 566 65-125 5.5/2 D132S 80 65 100 170 160 180 212 280 125 95 100 14 323 300 405 140 218 89 12 89 65-125 7.5/2 D132S 80 65 100 170 160 180 212 280 125 95 100 14 323 300 405 140 218 89 12 95 65-125 11/2 D160M 80 65 100 210 160 180 212 280 125 95 100 14 320 254 517 210 260 108 14 114 65-160 7.5/2 D132S 80 65 100 169 160 200 212 280 125 95 100 14 323 300 405 140 218 89 12 101 65-160 11/2 D160M 80 65 100 209 160 200 212 280 125 95 100 14 320 254 517 210 260 108 14 120 65-160 15/2 D160M 80 65 100 209 160 200 212 280 125 95 100 14 320 254 517 210 260 108 14 136 65-160 18.5/2 D160L 80 65 100 209 160 200 212 280 125 95 100 14 320 254 517 254 304 108 14 152 65-200 15/2 D160M 80 65 100 209 180 225 250 320 125 95 100 14 384 354 517 140 218 89 14 145 65-200 18.5/2 D160L 80 65 100 209 180 225 250 320 125 95 100 14 384 354 517 254 304 108 14 161 65-200 22/2 D180M 80 65 100 209 180 225 250 320 125 95 100 14 352 279 578 241 300 121 14 183 65-200 30/2 D200L 80 65 100 209 180 225 250 320 125 95 100 14 528 478 712 305 370 133 18 299 65-250 22/2 D180M 80 65 100 210 200 250 280 360 160 120 100 18 437 397 578 241 300 121 14 215 65-250 30/2 D200L 80 65 100 250 200 250 280 360 160 120 100 18 385 318 712 305 370 133 18 331 65-250 37/2 D200L 80 65 100 250 200 250 280 360 160 120 100 18 385 318 712 305 370 133 18 346 65-250 45/2 D225M 80 65 100 250 200 250 280 360 160 120 100 18 436 356 762 286 391 149 18 471 65-250 55/2 D250S 80 65 100 250 200 250 280 360 160 120 100 18 506 406 863 311 449 168 24 536 65-315 55/2 D250S 80 65 125 250 225 280 315 400 160 120 100 18 506 406 863 311 449 168 24 554 65-315 75/2 D250M 80 65 125 250 225 280 315 400 160 120 100 18 506 406 863 311 449 168 24 556 65-315 90/2 D280S 80 65 125 250 225 280 315 400 160 120 100 18 557 457 971 368 510 190 24 791 80-160 15/2 D160M 100 80 125 207 180 225 250 320 125 95 100 14 384 354 517 140 218 89 14 145 80-160 18.5/2 D160L 100 80 125 207 180 225 250 320 125 95 100 14 384 354 517 254 304 108 14 161 80-160 22/2 D180M 100 80 125 207 180 225 250 320 125 95 100 14 352 279 578 241 300 121 14 183 80-160 30/2 D200L 100 80 125 207 180 225 250 320 125 95 100 14 528 478 712 305 370 133 18 299
80-200 30/2 D200L 100 80 125 250 200 250 280 345 125 95 120 14 385 318 712 305 370 133 18 316 80-200 37/2 D200L 100 80 125 250 200 250 280 345 125 95 120 14 385 318 712 305 370 133 18 331 80-200 45/2 D225M 100 80 125 250 200 250 280 345 125 95 120 14 436 356 762 286 391 149 18 456
80-200 22/2 D180M 100 80 125 226 200 250 280 345 125 95 120 14 437 397 578 241 300 121 14 200
APEXPUMPS
76
Use dimension F1 for pumps with cast iron body and single mechanical seal. Terminal box may be top or side For indication only. Certified For stainless steel pumps and pumps with double mechanical seal, refer to Apex. mounted depending on motor make. drawings available on request
PUMP MOTOR FLANGES PUMP DIMENSIONS MOTOR DIMENSIONS MODEL FRAME IN OUT A F1 H1 H2 B1 B2 M1 M2 W S1 B3 B4 Lm B BB C S2 KG 80-250 37/2 D200L 100 80 125 250 200 280 315 400 160 120 140 18 385 318 712 305 370 133 18 351 80-250 45/2 D225S 100 80 125 250 200 280 315 400 160 120 140 18 436 356 762 286 391 149 18 476 80-250 55/2 D250S 100 80 125 250 200 280 315 400 160 120 140 18 506 406 863 311 449 168 24 541 80-250 75/2 D250M 100 80 125 250 200 280 315 400 160 120 140 18 506 406 863 311 449 168 24 561 100-160 18.5/2 D160L 125 100 125 255 200 250 280 360 160 120 140 18 384 354 517 254 304 108 14 188 100-160 22/2 D180M 125 100 125 255 200 250 280 360 160 120 140 18 437 397 578 241 300 121 14 210 100-160 30/2 D200L 125 100 125 250 200 250 280 360 160 120 140 18 385 318 712 305 370 133 18 326 100-200 37/2 D200L 125 100 125 250 200 280 280 360 160 120 140 18 385 318 712 305 370 133 18 348 100-200 45/2 D225S 125 100 125 250 200 280 280 360 160 120 140 18 436 356 762 286 391 149 18 473 100-200 55/2 D250S 125 100 125 250 200 280 280 360 160 120 140 18 506 406 863 311 449 168 24 538 100-200 75/2 D250M 125 100 125 250 200 280 280 360 160 120 140 18 506 406 863 311 449 168 24 558 100-250 55/2 D250S 125 100 140 250 225 280 315 400 160 120 140 18 506 406 863 311 449 168 24 560 100-250 75/2 D250M 125 100 140 250 225 280 315 400 160 120 140 18 506 406 863 311 449 168 24 580 100-250 90/2 D280S 125 100 140 250 225 280 315 400 160 120 140 18 557 457 971 368 510 190 24 815 100-250 110/2 D280M 125 100 140 250 225 280 315 400 160 120 140 18 557 457 971 368 510 190 24 850 125-200 55/2 D250S 150 125 140 219 250 315 315 400 160 120 140 18 506 406 863 311 449 168 24 548 125-200 75/2 D250M 150 125 140 219 250 315 315 400 160 120 140 18 506 406 863 311 449 168 24 568 125-200 90/2 D280S 150 125 140 219 250 315 315 400 160 120 140 18 557 457 971 368 510 190 24 791 32-125 0.55/4 D80 50 32 80 170 112 140 140 190 100 70 100 14 207 189 255 100 125 50 10 36 32-160 0.55/4 D80 50 32 80 169 132 160 190 240 100 70 100 14 207 189 255 100 125 50 10 44 32-200 0.55/4 D80 50 32 80 169 160 180 190 240 100 70 100 14 207 189 255 100 125 50 10 52 32-200 0.75/4 D80 50 32 80 169 160 180 190 240 100 70 100 14 207 189 255 100 125 50 10 53 32-200 1.1/4 D90S 50 32 80 169 160 180 190 240 100 70 100 14 222 204 244 100 125 56 10 56 32-250 1.1/4 D90S 50 32 100 172 180 225 250 320 125 95 120 14 222 204 244 100 125 56 10 74 32-250 1.5/4 D90L 50 32 100 172 180 225 250 320 125 95 120 14 222 204 269 125 154 56 10 77 32-250 2.2/4 D100L 50 32 100 172 180 225 250 320 125 95 120 14 267 244 303 140 176 63 12 82
40-125 0.55/4 D80 65 40 80 170 112 140 160 210 100 70 100 14 207 189 255 100 125 50 10 41 40-160 0.55/4 D80 65 40 80 169 132 160 190 240 100 70 100 14 207 189 255 100 125 50 10 47 40-160 0.75/4 D80 65 40 80 169 132 160 190 240 100 70 100 14 207 189 255 100 125 50 10 48 40-200 0.75/4 D80 65 40 100 165 160 180 212 265 100 70 100 14 207 189 255 100 125 50 10 56 40-200 1.1/4 D90S 65 40 100 165 160 180 212 265 100 70 100 14 222 204 244 100 125 56 10 59 40-200 1.5/4 D90L 65 40 100 165 160 180 212 265 100 70 100 14 222 204 269 125 154 56 10 62
Outline dimensions Apex TC pumpsets
4 HOLES S2Ø4 HOLES S1ØB1
B2
H2
H1
M2
M1
A F1 Lm W
C B
BB
B4
B3
(see note)
(see note)
77
APEXPUMPS
Use dimension F1 for pumps with cast iron body and single mechanical seal. Terminal box may be top or side For indication only. Certified For stainless steel pumps and pumps with double mechanical seal, refer to Apex. mounted depending on motor make. drawings available on request
PUMP MOTOR FLANGES
PUMP DIMENSIONS MOTOR DIMENSIONS
MODEL FRAME IN OUT A F1 H1 H2 B1 B2 M1 M2 W S1 B3 B4 Lm B BB C S2 KG 40-250 1.5/4 D90L 65 40 100 172 180 225 250 320 125 95 120 14 222 204 269 125 154 56 10 79 40-250 2.2/4 D100L 65 40 100 172 180 225 250 320 125 95 120 14 267 244 303 140 176 63 12 84 40-250 3.0/4 D100L 65 40 100 172 180 225 250 320 125 95 120 14 267 244 303 140 176 63 12 87 40-315 2.2/4 D100L 65 40 125 210 200 250 280 345 125 95 120 14 267 244 303 140 176 63 12 115 40-315 3.0/4 D100L 65 40 125 210 200 250 280 345 125 95 120 14 267 244 303 140 176 63 12 118 40-315 4.0/4 D112M 65 40 125 210 200 250 280 345 125 95 120 14 297 274 320 140 176 63 12 124 40-315 5.5/4 D132S 65 40 125 210 200 250 280 345 125 95 120 14 323 300 405 140 176 89 12 141
50-125 0.55/4 D80 65 50 100 170 132 160 190 240 100 70 100 14 207 189 255 100 125 50 10 43 50-125 0.75/4 D80 65 50 100 170 132 160 190 240 100 70 100 14 207 189 255 100 125 50 10 44 50-125 1.1/4 D90S 65 50 100 170 132 160 190 240 100 70 100 14 222 204 244 100 125 56 10 47 50-160 0.75/4 D80 65 50 100 169 160 180 212 265 100 70 100 14 207 189 255 100 125 50 10 48 50-160 1.1/4 D90S 65 50 100 169 160 180 212 265 100 70 100 14 222 204 244 100 125 56 10 51 50-160 1.5/4 D90L 65 50 100 169 160 180 212 265 100 70 100 14 222 204 269 125 154 56 10 54 50-200 1.1/4 D90S 65 50 100 171 160 200 212 265 100 70 100 14 222 204 244 100 125 56 10 59 50-200 1.5/4 D90L 65 50 100 171 160 200 212 265 100 70 100 14 222 204 269 125 154 56 10 62 50-200 2.2/4 D100L 65 50 100 171 160 200 212 265 100 70 100 14 267 244 303 140 176 63 12 67 50-250 2.2/4 D100L 65 50 100 172 180 225 250 320 125 95 120 14 267 244 303 140 176 63 12 84 50-250 3.0/4 D100L 65 50 100 172 180 225 250 320 125 95 120 14 267 244 303 140 176 63 12 87 50-250 4.0/4 D112M 65 50 100 172 180 225 250 320 125 95 120 14 297 274 320 140 176 63 12 93 50-250 5.5/4 D132S 65 50 100 172 180 225 250 320 125 95 120 14 323 300 405 140 176 89 12 110 50-315 4.0/4 D112M 65 50 125 250 225 280 280 345 125 95 140 14 297 274 320 140 176 63 12 126 50-315 5.5/4 D132S 65 50 125 250 225 280 280 345 125 95 140 14 323 300 385 140 184 89 12 143 50-315 7.5/4 D132M 65 50 125 250 225 280 280 345 125 95 140 14 323 300 405 178 218 89 12 152 50-315 11/4 D160M 65 50 125 250 225 280 280 345 125 95 140 14 384 354 517 210 260 108 14 178 65-125 0.75/4 D80 80 65 100 170 160 180 212 280 125 95 100 14 207 189 255 100 125 50 10 49 65-125 1.1/4 D90S 80 65 100 170 160 180 212 280 125 95 100 14 222 204 244 100 125 56 10 52 65-125 1.5/4 D90L 80 65 100 170 160 180 212 280 125 95 100 14 222 204 269 125 154 56 10 55 65-160 1.1/4 D90S 80 65 100 169 160 200 212 280 125 95 100 14 222 204 244 100 125 56 10 58 65-160 1.5/4 D90L 80 65 100 169 160 200 212 280 125 95 100 14 222 204 269 125 154 56 10 61 65-160 2.2/4 D100L 80 65 100 169 160 200 212 280 125 95 100 14 267 244 303 140 176 63 12 66 65-200 1.5/4 D90L 80 65 100 169 180 225 250 320 125 95 100 14 222 204 269 125 154 56 10 70 65-200 2.2/4 D100L 80 65 100 169 180 225 250 320 125 95 100 14 267 244 303 140 176 63 12 75 65-200 3.0/4 D100L 80 65 100 169 180 225 250 320 125 95 100 14 267 244 303 140 176 63 12 78 65-200 4.0/4 D112M 80 65 100 169 180 225 250 320 125 95 100 14 297 274 320 140 176 63 12 84 65-250 3.0/4 D100L 80 65 100 170 200 250 280 360 160 120 100 18 267 244 303 140 176 63 12 110
65-250 5.5/4 D132S 80 65 100 170 200 250 280 360 160 120 100 18 323 300 405 140 176 89 12 133 65-250 7.5/4 D132M 80 65 100 170 200 250 280 360 160 120 100 18 323 300 405 178 218 89 12 142 65-315 7.5/4 D132M 80 65 125 235 225 280 315 400 160 120 100 18 323 300 405 178 218 89 12 160 65-315 11/4 D160M 80 65 125 265 225 280 315 400 160 120 100 18 384 354 517 210 260 108 14 186
65-250 4.0/4 D112M 80 65 100 170 200 250 280 360 160 120 100 18 297 274 320 140 176 63 12 116
Outline dimensions Apex TC pumpsets
4 HOLES S2Ø4 HOLES S1ØB1
B2
H2
H1
M2
M1
A F1 Lm W
C B
BB
B4
B3
(see note)
(see note)
APEXPUMPS
78
Use dimension F1 for pumps with cast iron body and single mechanical seal. Terminal box may be top or side For indication only. Certified For stainless steel pumps and pumps with double mechanical seal, refer to Apex. mounted depending on motor make. drawings available on request
PUMP MOTOR FLANGES PUMP DIMENSIONS MOTOR DIMENSIONS MODEL FRAME IN OUT A F1 H1 H2 B1 B2 M1 M2 W S1 B3 B4 Lm B BB C S2 KG 80-160 1.5/4 D90L 100 80 125 167 180 225 250 320 125 95 100 14 222 204 269 125 154 56 10 70 80-160 2.2/4 D100L 100 80 125 167 180 225 250 320 125 95 100 14 267 244 303 140 176 63 12 75 80-160 3.0/4 D100L 100 80 125 167 180 225 250 320 125 95 100 14 267 244 303 140 176 63 12 78 80-200 3.0/4 D100L 100 80 125 186 180 250 280 345 125 95 120 14 267 244 303 140 176 63 12 95 80-200 4.0/4 D112M 100 80 125 186 180 250 280 345 125 95 120 14 297 274 320 140 176 63 12 101 80-200 5.5/4 D132S 100 80 125 186 180 250 280 345 125 95 120 14 323 300 405 140 176 89 12 118 80-250 4.0/4 D112M 100 80 125 170 200 280 315 400 160 120 120 18 297 274 320 140 176 63 12 121 80-250 5.5/4 D132S 100 80 125 170 200 280 315 400 160 120 120 18 323 300 405 140 176 89 12 138 80-250 7.5/4 D132M 100 80 125 170 200 280 315 400 160 120 120 18 323 300 405 178 218 89 12 147 80-250 11/4 D160M 100 80 125 210 200 280 315 400 160 120 120 18 384 354 517 210 260 108 14 173 80-315 7.5/4 D132M 100 80 125 250 250 315 315 400 160 120 120 18 323 300 405 178 218 89 12 160 80-315 11/4 D160M 100 80 125 250 250 315 315 400 160 120 120 18 384 354 510 210 252 108 14 186 80-315 15/4 D160L 100 80 125 250 250 315 315 400 160 120 120 18 384 354 517 254 304 108 14 207 80-315 18.5/4 D180M 100 80 125 250 250 315 315 400 160 120 120 18 437 397 578 241 300 121 14 229 80-400 15/4 D160L 100 80 125 255 280 355 340 440 160 120 120 18 384 354 517 254 304 108 14 265 80-400 18.5/4 D180M 100 80 125 255 280 355 340 440 160 120 120 18 437 397 578 241 300 121 14 287 80-400 22/4 D180L 100 80 125 255 280 355 340 440 160 120 120 18 437 397 578 279 340 121 14 302 80-400 30/4 D200L 100 80 125 255 280 355 340 440 160 120 120 18 528 478 657 305 370 133 18 402
100-160 3.0/4 D112M 125 100 125 225 200 250 280 360 160 120 140 18 267 244 303 140 176 63 12 105 100-160 4.0/4 D112M 125 100 125 225 200 250 280 360 160 120 140 18 297 274 320 140 176 63 12 111 100-200 4.0/4 D112M 125 100 125 186 200 280 280 360 160 120 120 18 297 274 320 140 176 63 12 118 100-200 5.5/4 D132S 125 100 125 186 200 280 280 360 160 120 120 18 323 300 405 140 176 89 12 135 100-200 7.5/4 D132M 125 100 125 186 200 280 280 360 160 120 120 18 323 300 405 178 218 89 12 144 100-250 5.5/4 D132S 125 100 140 180 225 280 315 400 160 120 140 18 323 300 405 140 176 89 12 157 100-250 7.5/4 D132M 125 100 140 180 225 280 315 400 160 120 140 18 323 300 405 178 218 89 12 166 100-250 11/4 D160M 125 100 140 220 225 280 315 400 160 120 140 18 384 354 517 210 260 108 14 192 100-250 15/4 D160L 125 100 140 220 225 280 315 400 160 120 140 18 384 354 517 254 304 108 14 213 100-315 7.5/4 D132M 125 100 140 230 250 315 315 400 160 120 140 18 323 300 405 178 218 89 12 176 100-315 11/4 D160M 125 100 140 260 250 315 315 400 160 120 140 18 384 354 517 210 260 108 14 202 100-315 15/4 D160L 125 100 140 260 250 315 315 400 160 120 140 18 384 354 517 254 304 108 14 223 100-315 18.5/4 D180M 125 100 140 260 250 315 315 400 160 120 140 18 437 397 578 241 300 121 14 245 100-315 22/4 D180L 125 100 140 260 250 315 315 400 160 120 140 18 437 397 578 279 340 121 14 260 100-400 22/4 D180L 125 100 140 255 280 355 400 500 200 150 140 23 437 397 578 279 340 121 14 262 100-400 30/4 D200L 125 100 140 255 280 355 400 500 200 150 140 23 528 478 657 305 370 133 18 362 100-400 37/4 D225S 125 100 140 440 280 355 400 500 200 150 140 23 566 516 707 311 391 149 18 452 100-400 45/4 D225M 125 100 140 440 280 355 400 500 200 150 140 23 566 516 707 311 391 149 18 502
125-200 5.5/4 D132S 150 125 140 187 250 315 315 400 160 120 140 18 323 300 405 140 176 89 12 145
125-200 11/4 D160M 150 125 140 227 250 315 315 400 160 120 140 18 384 354 517 210 260 108 14 180 125-250 11/4 D160M 150 125 140 218 250 355 315 400 160 120 140 18 384 354 517 210 260 108 14 197 125-250 15/4 D160L 150 125 140 218 250 355 315 400 160 120 140 18 384 354 517 254 304 108 14 218
125-200 7.5/4 D132M 150 125 140 187 250 315 315 400 160 120 140 18 323 300 405 178 218 89 12 154
Outline dimensions Apex TC pumpsets
4 HOLES S2Ø4 HOLES S1ØB1
B2
H2
H1
M2
M1
A F1 Lm W
C B
BB
B4
B3
(see note)
(see note)
79
APEXPUMPS
Use dimension F1 for pumps with cast iron body and single mechanical seal. Terminal box may be top or side For indication only. Certified For stainless steel pumps and pumps with double mechanical seal, refer to Apex. mounted depending on motor make. drawings available on request
APEXPUMPS
80
PUMP MOTOR FLANGES PUMP DIMENSIONS MOTOR DIMENSIONS MODEL FRAME IN OUT A F1 H1 H2 B1 B2 M1 M2 W S1 B3 B4 Lm B BB C S2 KG 125-250 18.5/4 D180M 150 125 140 218 250 355 315 400 160 120 140 18 437 397 578 241 300 121 14 240 125-250 22/4 D180L 150 125 140 218 250 355 315 400 160 120 140 18 437 397 578 279 340 121 14 255 125-315 15/4 D160L 150 125 140 255 280 355 400 500 200 150 140 23 384 354 517 254 304 108 14 258 125-315 18.5/4 D180M 150 125 140 255 280 355 400 500 200 150 140 23 437 397 578 241 300 121 14 280 125-315 22/4 D180L 150 125 140 255 280 355 400 500 200 150 140 23 437 397 578 279 340 121 14 295 125-315 30/4 D200L 150 125 140 255 280 355 400 500 200 150 140 23 528 478 657 305 370 133 18 395 125-400 30/4 D200L 150 125 140 255 315 400 400 500 200 150 140 23 528 478 657 305 370 133 18 429 125-400 37/4 D225S 150 125 140 255 315 400 400 500 200 150 140 23 566 516 707 311 391 149 18 519 125-400 45/4 D225M 150 125 140 255 315 400 400 500 200 150 140 23 566 516 707 311 391 149 18 569 125-400 55/4 D225M 150 125 140 255 315 400 400 500 200 150 140 23 566 516 707 311 391 149 18 649 150-200 11/4 D160M 200 150 160 255 280 400 450 550 200 150 140 23 384 354 517 210 260 108 14 196 150-200 15/4 D160L 200 150 160 255 280 400 450 550 200 150 140 23 384 354 517 254 304 108 14 217 150-200 18.5/4 D180M 200 150 160 255 280 400 450 550 200 150 140 23 437 397 578 241 300 121 14 239 150-250 18.5/4 D180M 200 150 160 255 250 355 350 450 200 150 140 23 437 397 578 241 300 121 14 275 150-250 22/4 D180L 200 150 160 255 250 355 350 450 200 150 140 23 437 397 578 279 340 121 14 290 150-250 30/4 D200L 200 150 160 255 250 355 350 450 200 150 140 23 528 478 657 305 370 133 18 390 150-315 22/4 D180L 200 150 160 255 280 400 450 550 200 150 140 23 437 397 578 279 340 121 14 315 150-315 30/4 D200L 200 150 160 255 280 400 450 550 200 150 140 23 528 478 657 305 370 133 18 415 150-315 37/4 D225S 200 150 160 255 280 400 450 550 200 150 140 23 566 516 707 311 391 149 18 505 150-315 45/4 D225M 200 150 160 255 280 400 450 550 200 150 140 23 566 516 707 311 391 149 18 555 150-315 55/4 D225M 200 150 160 255 280 400 450 550 200 150 140 23 566 516 707 311 391 149 18 635 150-400 37/4 D225S 200 150 160 255 315 450 450 550 200 150 140 23 566 516 707 311 391 149 18 530 150-400 45/4 D225M 200 150 160 255 315 450 450 550 200 150 140 23 566 516 707 311 391 149 18 580 150-400 55/4 D225M 200 150 160 255 315 450 450 550 200 150 140 23 566 516 707 311 391 149 18 660 150-400 75/4 D250M 200 150 160 255 315 450 450 550 200 150 140 23 640 580 930 349 432 168 18 710 200-250 37/4 D225S 250 200 180 278 315 450 450 550 200 150 250 23 566 516 707 311 391 149 18 560 200-250 45/4 D225M 250 200 180 278 315 450 450 550 200 150 250 23 566 516 707 311 391 149 18 610 200-250 55/4 D250S 250 200 180 278 315 450 450 550 200 150 250 23 566 516 707 311 391 149 18 690 200-315 45/4 D225M 250 200 180 348 315 480 480 600 220 170 250 28 566 516 707 311 391 149 18 631 200-315 55/4 D225M 250 200 180 348 315 480 480 600 220 170 250 28 566 516 707 311 391 149 18 711 200-315 75/4 D250M 250 200 180 348 315 480 480 600 220 170 250 28 636 586 783 349 449 168 24 761 200-400 75/4 D250M 250 200 180 348 335 480 480 600 220 170 250 28 636 586 783 349 449 168 24 805 200-400 90/4 D280S 250 200 180 348 335 480 480 600 220 170 250 28 687 637 783 419 510 190 24 1090 200-400 110/4 D280S 250 200 180 348 335 480 480 600 220 170 250 28 687 637 783 419 510 190 24 1075 200-400 132/4 D280M 250 200 180 348 335 480 480 600 220 170 250 28 687 637 783 419 510 190 24 1235 250-315 45/4 D225M 300 250 220 369 355 520 510 660 250 200 250 28 566 516 707 311 391 149 18 691 250-315 55/4 D225M 300 250 220 369 355 520 510 660 250 200 250 28 566 516 707 311 391 149 18 771 250-315 75/4 D250M 300 250 220 369 355 520 510 660 250 200 250 28 636 586 783 349 449 168 24 821 250-400 110/4 D280S 300 250 220 360 400 560 510 660 250 200 250 28 687 637 783 419 510 190 24 1170 250-400 132/4 D280M 300 250 220 360 400 560 510 660 250 200 250 28 687 637 783 419 510 190 24 1330 250-400 160/4 D315S 300 250 220 360 400 560 510 660 250 200 250 28 758 708 866 457 558 216 28 1385
Outline dimensions Apex TC pumpsets
4 HOLES S2Ø4 HOLES S1ØB1
B2
H2
H1
M2
M1
A F1 Lm W
C B
BB
B4
B3
(see note)
(see note)
Use dimension F1 for pumps with cast iron body and single mechanical seal. Terminal box may be top or side For indication only. Certified For stainless steel pumps and pumps with double mechanical seal, refer to Apex. mounted depending on motor make. drawings available on request