td end-suction pumps · horizontal single stage end-suction pump with per-formance and key...
TRANSCRIPT
1
APEXPUMPS
Rev
3 d
ated
28/
9/20
03
Applications • Water supply • Cooling water • Air conditioning • Heating circulation • Industrial liquids and chemicals • Seawater • Oils, solvents and process liquids • Drinking and potable water • Aqua-culture • Electrophoretic paint Operating data Flow rates up to 300 l/sec Head up to 160 metres Temperature –200C to +1500C Construction Horizontal single stage end-suction pump with per-formance and key dimensions in accordance with DIN 24255 standard. The back-pull-out construction allows the pump to be dismantled without disturbing the suc-tion and discharge pipework. Impellers are fully shrouded closed design, with double curvature vanes for optimum efficiency and good suction performance. Vortex design semi-open impellers are also available on some sizes. Electric motors Apex TD pumps are supplied bareshaft or with a TEFC IP55 electric motor. Alternative motors including Eexd flameproof motors are readily available.
Materials The pump pressure containing parts are cast in a variety of materials, selected to suit the working pressure of the pump, and to be compatible with the liquid being handled. Available materials are: • Cast iron • Ductile iron • Cast 316 Stainless steel • Cast bronze • Cast steel • Specialist steels eg Duplex, Hastalloy
Flanges Standard flanges are drilled to the British Standard BS4504, with pressure rating to suit the specific appli-cation: BS4504 PN16 16 bar working pressure BS4504 PN25 25 bar working pressure BS4504 PN40 40 bar working pressure ANSI standard flanges drilled to 150 lb or 300 lb rat-ings and all other standards are available on request.
Seals A Packed gland seal or single mechanical seal is sup-plied as standard. Double mechanical seals and car-tridge seals can be fitted to suit the application and to meet customers’ preferences.
TD End-Suction Pumps
One of the broadest ranges of pumps available from any British manufacturer, with discharge sizes from 32 mm to 250 mm. Widest choice of materials of construction and op-tions to suit many industrial and building services specific requirements. Stainless steel pumps built from stock components. Competitively priced and manufactured from com-ponents held in stock, with reliable prompt deliver-ies. Capable of handling clean water, seawater, sol-vents, chemicals and other liquids with similar prop-erties. All pumps are manufactured strictly to ISO 9001 quality control standards
APEXPUMPS
2
New Features of the TD pump range
More sizes….
New sizes are continually being added to the range, and with the recent introduction of the 200 mm and 250 mm discharge size pumps, and with motor pow-ers up to 160 kW, the TD pump range is one of the most comprehensive ranges of close coupled pumps available from any pump manufacturer today. Now also available in In-Line Vertical configuration.
….Benefit
Greater choice results in a better hydraulic selection, optimised operating efficiency and lower power con-sumption. Now with 42 pump sizes to the Apex TD range, a cost-effective and properly engineered solu-tion can be provided for most industrial pumping ap-plications.
Larger stock….
Our policy of stocking large quantities of finished machined component parts, ready for immediate assembly, enables us to provide a fast delivery of complete pumps and spare parts, and has earned the company its good reputation for reliable delivery.
….Benefit
Quick delivery is appreciated by users and pump distributors alike, and makes Apex Pumps the first choice for replacement of existing pumps of other makes.
Wide Choice of options….
Virtually any mechanical seal, cartridge seal or packed gland arrangement, with flush, quench or independent circulation system is possible with the Apex TD pump range. Modular construction enables the pump to be engineered using standard stock components wherever possible, and our in-house CNC machining facilities can quickly produce any special parts against tight deadlines.
….Benefit
Pump users benefit by the broad engineering experi-ence at Apex, and our familiarity with difficult appli-cations and demanding duties.
Specialist materials….
Apex carry large stocks of cast stainless steel pump components, and operate fast-track manufacture of specialist materials such as Duplex stainless steel and Hastalloy, backed by full materials certification and traceability.
….Benefit
Industrial applications are increasingly specifying stainless steel pump materials in recognition of the environmental and economic benefits. Apex Pump’s investment in stainless steel stock parts, provides users with a standard pump to the highest specifica-tions.
Higher Pressures….
Pumps required to operate in tall buildings, and in certain industrial processes, need to operate at high working pressures. For these applications, Apex Pumps offer the TD range of close coupled pumps in cast steel, with flanges to BS4504 PN40.
….Benefit
The TD pump in cast steel provides a cost effective solution to what would otherwise be a specialist pump application. Many component parts will be shared with other TD pumps, providing spares inter-changeability throughout the site.
Competitive Prices….
As a specialist manufacturer of centrifugal pumps, all Apex products are designed to be highly competitive without compromise to quality and good engineering practice.
….Benefit
Apex fully supports its pump distributor network and customers by providing cost effective solutions to pumping problems.
Quality Control….
Every pump produced by Apex is manufactured strictly to ISO 9001 quality control procedures, and complies with the most rigorous documentary re-quirements of demanding customers.
….Benefit
The in-house engineering capability, attention to quality control and testing facilities make Apex the preferred choice for many high specification projects.
3
APEXPUMPS
TD range charts 50 hz
60
100-400
80-315
ME
TR
ES
65-31540-315
50
40
30
80-400
50-315
2032-250
15
32-200
40-25050-250 65-250 80-250
40-200
150-315125-315
150-400125-400 200-400 250-400
100-315
200-315
100-250
250-315
150-250
125-250
100-200
100-160
65-125
10
8
6
32-160
50-200 80-20065-200
40-16050-160 80-16065-160
5
432-125
3
40-12550-125
125-200150-200
4
24 6 8 10 12
21.5 3
2515 20 30 40 50 7060 10080 120
5 6 108 2015 30
1200400M3/HR
150 200 300 700500 600 800 1000
6040 50 80 100L/SEC
150 250 300200
80-16032-160 40-160
150
40-12532-125
2
6
8
3
15
10
20
4 5 6
65-160
15
50-125
8 10 20 30
65-125
100-160
40 6050 10080 200
40-200
80
50
30
40
60
120
100
200
150
32-250
32-200
40-315
50-315
50-250
50-200
50-160
40-250
65-200
65-250
65-315
100-200
100-25080-250
80-200
125-200
1450 rpm
ME
TRE
S
2900 rpm
8 10 12 15 20 25 30 40 50 60 70 80 100 120 150 200 300 400 500 600M3/HR
L/SEC
200-250
80-315 100-315
APEXPUMPS
4
Ref Item Standard Alternative materials
01 Volute casing Cast iron Ductile iron, bronze, 316 stainless steel 02 Impeller Cast iron Bronze, 316 stainless steel 03 Shaft 420 SS 316 stainless steel, Duplex stainless steel 04 Backcover Cast iron Ductile iron, bronze, 316 stainless steel 06 Bearing housing Cast iron 08 Impeller nut Steel Bronze, 316 stainless steel
08.1 Impeller nut washer Steel Bronze, 316 stainless steel 09 Gland Cast iron 316 stainless steel
10.1 Casing gasket Gasket paper Specialist gasket materials 10.3 End cover gasket Gasket paper 11 Support foot Steel 12 Wear ring Cast iron Cast iron, bronze, 316 stainless steel
13.1 Impeller key Key steel 316 stainless steel 13.2 Coupling key Key steel 41 Ball bearing Steel 42 Bearing end cover Cast iron 44 Shaft sleeve 420 SS 316 stainless steel, Nitride hardened stainless steel 46 Grease seal Felt Nitrile rubber lip seal 47 Lifting eye Steel 48 Flinger Nitrile rubber 52 Lantern ring LG4 Bronze Cast iron, 316 stainless steel 53 Gland packing Cotton/graphite PTFE, specialist packing materials F1 Casing bolts Steel 316 stainless steel F2 Housing bolts Steel 316 stainless steel F3 Gland studs Steel 316 stainless steel F4 Support foot bolt Steel F5 End cover bolts Steel P1 Casing vent plug Steel 316 stainless steel P2 S u c t i o n g a u g e p l u g Steel 316 stainless steel P3 Casing drain plug Steel 316 stainless steel
04 52 53 47 42 F5 41 03 06 10.3 46 13.209
F411F3F2F1
P1
02
P3
08.1
P2
08
13.1
12
01
44
48
10.1
Typical cross section with packed gland
5
APEXPUMPS
Ref Item Standard Alternative materials 01 Volute casing Cast iron Ductile iron, bronze, 316 stainless steel 02 Impeller Cast iron Bronze, 316 stainless steel 03 Shaft 420 SS 316 stainless steel, Duplex stainless steel 04 Backcover Cast iron Ductile iron, bronze, 316 stainless steel 06 Bearing housing Cast iron 07 Mechanical seal As specified Any commercially available specification 08 Impeller nut Steel Bronze, 316 stainless steel
08.1 Impeller nut washer Steel Bronze, 316 stainless steel 09 Glandplate Cast iron 316 stainless steel
10.1 Casing gasket Gasket paper Specialist gasket materials 10.2 Glandplate gasket Gasket paper Specialist gasket materials 10.3 End cover gasket Gasket paper 11 Support foot Steel Key steel, 316 stainless steel 12 Wear ring Cast iron Bronze, 316 stainless steel
13.1 Impeller key Key steel Key steel, 316 stainless steel 13.2 Coupling key Key steel 41 Ball bearing Steel 42 Bearing end cover Cast iron 44 Spacer sleeve 420 SS 316 stainless steel 46 Grease seal Felt Nitrile rubber lip seal 47 Lifting eye Steel 48 Flinger Nitrile rubber F1 Casing bolts Steel 316 stainless steel F2 Housing bolts Steel 316 stainless steel F3 Glandplate studs Steel 316 stainless steel F4 Support foot bolt Steel F5 End cover bolts Steel P1 Casing vent plug Steel 316 stainless steel P2 Suction gauge plug Steel 316 stainless steel P3 Casing drain plug Steel 316 stainless steel
17 Double seal glandplate 316 stainless steel 17.1 Primary seal carrier 316 stainless steel 61 O ring Viton P4 Seal flush inlet connection
07.1 Primary Mechanical seal As specified Any commercially available specification 07.2 Secondary mechanical seal As specified Any commercially available specification
P5 Seal flush outlet connection
04 07 47 42 F5 41 03 06 10.3 46 13.209
F411F3F2F1
P1
02
P3
08.1
P2
08
13.1
12
01
44
48
10.1
10.2
61
44
P407.1
07.2
F3
17.1
04 P5
Double sealdetail
17
Typical cross section with mechanical seal
APEXPUMPS
6
A BC D
Inboard bearing Outboard bearing
Eye
Dia
met
er
W
Impeller and bearing housing data
Pump Shaft Shaft diameter at: Bearing type size group Impeller
A Seal
B Bearings
C Coupling
D Inboard Outboard No of
Vanes Eye dia
mm Width
W Max
solids mm M of I Kgm2
32-125 1 20 24 25 24 6305 6305 6 62 6.5 3.3 0.003 32-160 1 20 24 25 24 6305 6305 6 63 7.0 3.5 0.005 32-200 1 20 24 25 24 6305 6305 4 68 6.0 3.0 0.012 32-250 1 20 24 25 24 6305 6305 6 71 6.0 3.0 0.034
40-125 1 20 24 25 24 6305 6305 6 72 10.5 5.3 0.003 40-160 1 20 24 25 24 6305 6305 6 68 6.0 3.0 0.005 40-200 1 20 24 25 24 6305 6305 6 67 8.0 4.0 0.015 40-250 1 20 24 25 24 6305 6305 6 84 5.5 2.8 0.038 40-315 2 28 32 35 32 6307 6307 6 77 7.0 3.5 0.087
50-125 1 20 24 25 24 6305 6305 6 89 16.5 8.3 0.004 50-160 1 20 24 25 24 6305 6305 6 85 13.5 6.8 0.006 50-200 1 20 24 25 24 6305 6305 6 87 10.0 5.0 0.015 50-250 1 20 24 25 24 6305 6305 7 95 8.0 4.0 0.040 50-315 2 28 32 35 32 6307 6307 6 101 8.0 4.0 0.091
65-125 1 20 24 25 24 6305 6305 7 101 23.0 11.5 0.005 65-160 1 20 24 25 24 6305 6305 6 99 18.5 9.3 0.008 65-200 1 20 24 25 24 6305 6305 6 107 16.0 8.0 0.015 65-250 2 28 32 35 32 6307 6307 6 108 13.5 6.8 0.042 65-315 2 28 32 35 32 6307 6307 7 114 11.5 5.8 0.102
80-160 1 20 24 25 24 6305 6305 7 117 25.0 12.5 0.010 80-200 2 28 32 35 32 6307 6307 7 121 21.5 10.8 0.019 80-250 2 28 32 35 32 6307 6307 7 120 15.0 7.5 0.040 80-315 2 28 32 35 32 6307 6307 7 120 13.0 6.5 0.089 80-400 3 38 44 45 42 6309 6309 6 128 10.0 5.0 0.325
100-160 2 28 32 35 32 6307 6307 7 148 32.0 16.0 0.020 100-200 2 28 32 35 32 6307 6307 7 142 26.5 13.3 0.024 100-250 2 28 32 35 32 6307 6307 7 143 30.5 15.3 0.055 100-315 2 28 32 35 32 6307 6307 7 144 19.5 9.8 0.128 100-400 3 38 44 45 42 6309 6309 7 148 14.5 7.3 0.295
125-200 2 28 32 35 32 6307 6307 7 169 36.0 18.0 0.055 125-250 2 28 32 35 32 6307 6307 6 168 31.5 15.8 0.063 125-315 3 38 44 45 42 6309 6309 6 167 24.5 12.3 0.136 125-400 3 38 44 45 42 6309 6309 6 167 22.0 11.0 0.310
150-200 2a 28 32 35 32 6307 6307 6 169 56.0 28.0 0.090 150-250 3 38 44 45 42 6309 6309 7 185 40.0 20.0 0.100 150-315 3 38 44 45 42 6309 6309 6 184 32.0 16.0 0.150
Impeller data
150-400 3 38 44 45 42 6309 6309 7 188 26.5 13.3 0.330
200-315 4 45 53 55 48 6311 6311 6 232.5 50 25 0.236 200-400 4 45 53 55 48 6311 6311 7 222 37.5 19 0.654 250-315 4 45 53 55 48 6311 6311 6 242 72 36 0.939 250-400 4 45 53 55 48 6311 6311 6 235 52 26 0.725
200-250 3 38 44 45 42 6309 6309 6 230 62 31 0.202
7
APEXPUMPS
H0
B1
B3
B2
L2
A
L1
L24 HOLES d DIA
RAILS
CROSS MEMBERS
TO
SU
IT P
UM
P
TO
SU
IT M
OT
OR
Ref H0 A L1 L2 B1 B2 B3 d Rails Cross members kg 2a 75 60 800 130 260 360 320 18 75x50x8 angle 50x50x6 angle 25 3a 75 60 900 150 290 390 350 18 75x50x8 angle 50x50x6 angle 27 3b 75 75 900 150 290 390 350 18 75x50x8 angle 70x70x8 angle 36 4a 75 60 1000 170 350 450 400 22 75x50x8 angle 50x50x6 angle 32 4b 75 75 1000 170 350 450 400 22 75x50x8 angle 70x70x8 angle 42 5a 100 60 1120 190 360 490 440 22 100x65x10 angle 50x50x6 angle 49 5b 100 75 1120 190 360 490 440 22 100x65x10 angle 70x70x8 angle 60 6b 100 75 1250 205 410 540 490 22 100x65x10 angle 70x70x8 angle 67 6c 100 90 1250 205 410 540 490 22 100x65x10 angle 80x80x10 angle 78 7b 100 75 1400 230 480 610 550 25 100x65x10 angle 70x70x8 angle 76 7c 100 90 1400 230 480 610 550 25 100x65x10 angle 80x80x10 angle 89 7d 100 110 1400 230 480 610 550 25 100x65x10 angle 100x100x10 angle 101 8c 152 90 1600 270 508 660 600 25 152x76 channel 80x80x10 angle 122 8d 152 110 1600 270 508 660 600 25 152x76 channel 100x100x10 angle 134 9c 152 90 1800 300 578 730 670 25 152x76 channel 80x80x10 angle 137 9d 152 110 1800 300 578 730 670 25 152x76 channel 100x100x10 angle 152 10e 152 140 1900 315 698 850 780 28 152x76 channel 100x100x10 angle 156 11e 203 140 2000 330 772 950 870 28 203x89 channel 100x100x10 angle 207
32-125 2a 32-160 2a 3a 32-200 2a 3a 4a 32-250 4b 4b 4b 5b 5b 5b
40-125 2a 3a 40-160 2a 3a 4a 40-200 3a 3a 4a 5a 5a 5a 40-250 4b 4b 4b 5b 5b 5b 40-315 5b 5b 6b 6b 6b 7b 7b
50-125 2a 3a 3a 50-160 3a 3a 4a 5a 5a 5a 50-200 3a 3a 4a 5a 5a 5a 50-250 4b 4b 5b 5b 5b 50-315 5b 5b 6b 6b 6b 7b 7b 8b
65-125 3b 3b 4b 5b 5b 5b 65-160 3b 3b 4b 5b 5b 5b 65-200 4b 4b 4b 5b 5b 5b 6b 65-250 6c 6c 6c 6c 6c 6c 7c 8c 65-315 6c 6c 6c 6c 6c 6c 7c 8c
80-160 4b 4b 4b 5b 5b 5b 6b 80-200 5b 5b 5b 6b 6b 6b 7b 7b
80-250 6c 6c 6c 6c 6c 7c 7c 8c 9c 80-315 6c 6c 6c 6c 7c 7c 8c 9c 9c 80-400 7c 7c 7c 7c 7c 7c
100-160 5c 5c 6c 6c 6c 7c 7c 100-200 5c 5c 6c 6c 6c 7c 7c 8c 9c 100-250 6c 6c 6c 6c 7c 7c 8c 100-315 6c 6c 6c 7c 7c 7c 8c 9c 9c 11e 100-400 8d 8d 8d 8d 8d
125-200 6c 6c 6c 6c 7c 7c 8c 9c 9c 125-250 6c 6c 6c 7c 125-315 8d 8d 8d 8d 8d 125-400 8d 8d 8d 8d 8d 8d
150-200 7d 7d 7d 7d 150-250 7d 7d 7d 8d 8d 150-315 9d 9d 9d 9d 9d 9d 150-400 9d 9d 9d 9d 9d 200-250 9d 9d 9d 200-315 10e 10e 10e 200-400 10e 10e 10e 11e 250-315 10e 10e 10e 250-400 10e 11e
Fabricated bedplate selection and size combination, and give the general dimensions. Alternative skid-type bedplates and drain-rim bedplates are also avail-able, either following the general dimensions below, or fabri-cated to customer’s specification.
Pum
p m
odel
D10
0/12
D13
2
D16
0
D18
0M
D18
0L
D20
0
D22
5
D25
0S
D25
0M
D28
0S/M
D31
5S/M
Pum
p m
odel
D80
/90
D10
0/12
D13
2
D16
0
D18
0M
D18
0L
D20
0
D22
5
D25
0S
Standard bedplates are fabricated from rolled steel sec-tions, and are intended to be grouted into position on a suitable concrete plinth. The tables below indicate which bedplate size is required for a particular pump and motor
APEXPUMPS
8
H0
B1
B3
B2
L2
A
L1
L24 HOLES d DIA
TO S
UIT
PU
MP
TO
SU
IT M
OT
OR
Bedplate ref
H0 A L1 L2 B1 B2 B3 d Bedplate steel End sections Mass kg
2a 75 60 800 130 260 360 320 18 6 mm steel plate 10 mm steel plate 23 3a 75 60 900 150 290 390 350 18 6 mm steel plate 10 mm steel plate 27 3b 75 75 900 150 290 390 350 18 6 mm steel plate 10 mm steel plate 27 4a 75 60 1000 170 350 450 400 22 6 mm steel plate 10 mm steel plate 33 4b 75 75 1000 170 350 450 400 22 6 mm steel plate 10 mm steel plate 33 5a 100 60 1120 190 360 490 440 22 6 mm steel plate 10 mm steel plate 44 5b 100 75 1120 190 360 490 440 22 6 mm steel plate 10 mm steel plate 44 6b 100 75 1250 205 410 540 490 22 6 mm steel plate 10 mm steel plate 52 6c 100 90 1250 205 410 540 490 22 6 mm steel plate 10 mm steel plate 52
32-125 2a 32-160 2a 3a 32-200 2a 3a 4a 32-250 4b 4b 4b 5b 5b 5b
40-125 2a 3a 40-160 2a 3a 4a 40-200 3a 3a 4a 5a 5a 5a 40-250 4b 4b 4b 5b 5b 5b 40-315 5b 5b 6b 6b 6b
50-125 2a 3a 3a 50-160 3a 3a 4a 5a 5a 5a 50-200 3a 3a 4a 5a 5a 5a 50-250 4b 4b 5b 5b 5b 50-315 5b 5b 6b 6b 6b
Folded steel bedplate selection and size
Folded steel bedplates are fabricated from mild steel sheet, with welded ends which incorporate lifting eyes. Folded steel bedplates may be secured to con-crete foundations without the need for grouting.
Pum
p m
odel
D80
D
90
D10
0 D
112
D13
2
D16
0
D18
0M
D18
0L
Folded steel bedplates are only available for motors up to framesize D180 (22 kW motor output). For lar-ger pump and motor sizes, use the fabricated steel style of bedplate on the previous page.
65-125 3b 3b 4b 5b 5b 5b 65-160 3b 3b 4b 5b 5b 5b 65-200 4b 4b 4b 5b 5b 5b 65-250 6c 6c 6c 6c 6c 65-315 6c 6c 6c 6c 6c
80-160 4b 4b 4b 5b 5b 5b 80-200 5b 5b 5b 6b 6b 6b 80-250 6c 6c 6c 6c 6c 80-315 6c 6c 6c 6c
100-160 5c 5c 6c 6c 6c 100-200 5c 5c 6c 6c 6c 100-250 6c 6c 6c 6c 100-315 6c 6c 6c
Pum
p m
odel
D80
D
90
D10
0 D
112
D13
2
D16
0
D18
0M
D18
0L
9
APEXPUMPS
50 32 12 bar TD 32-125
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
2860
139
121
103
55
35 4044
50
50
45
130
112
48
48
53
53
6
8
10
12
14
16
18
20
22
24
26
0 1 2 3 4 5 6 7
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
.
1
2
3
0 1 2 3 4 5 6 7
N.P
.S.H
Met
res
139
121
103
130
112
0.0
0.5
1.0
1.5
2.0
0 1 2 3 4 5 6 7
Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
APEXPUMPS
10
50 32 12 bar TD 32-160
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
2880
174
152
130
58
33 39 4452
52
46
163
141
49
49
56
56
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
0 1 2 3 4 5 6 7 8
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
4
0 1 2 3 4 5 6 7 8
N.P
.S.H
Met
res
174
152
130
163
141
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
0 1 2 3 4 5 6 7 8Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
11
APEXPUMPS
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
290050 32 12 bar TD 32-200
214
190
166
53
35 4044
50
50
44
202
178
47
47
52
52
25
30
35
40
45
50
55
60
65
70
0 1 2 3 4 5 6 7 8 9
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
4
0 1 2 3 4 5 6 7 8 9
N.P
.S.H
Met
res
214
190
166
202
178
2
3
4
5
6
7
8
0 1 2 3 4 5 6 7 8 9Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
APEXPUMPS
12
50 32 12 bar TD 32-250
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
2940
264
240
216
44
3236
39
42
42
40
252
228
41
41
43
43
50
60
70
80
90
100
110
0 1 2 3 4 5 6 7 8 9 10
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
.
0
2
4
6
8
0 1 2 3 4 5 6 7 8 9 10
N.P
.S.H
Met
res
264
240
216
252
228
4
6
8
10
12
14
16
18
0 1 2 3 4 5 6 7 8 9 10Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
13
APEXPUMPS
65 40 12 bar TD 40-125
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
2880
139
121
103
76
48 55 6170
70
61
130
112
65
65
74
74
8
10
12
14
16
18
20
22
24
26
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
4
5
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
N.P
.S.H
Met
res
139
121
103
130
112
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
APEXPUMPS
14
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
290065 40 12 bar TD 40-160
174
152
130
66
42 49 5361
61
54
163
141
57
57
64
64
10
15
20
25
30
35
40
45
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Tot
al H
ead
Met
res
Impe
ller
dia
mm
.
2
3
4
5
6
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
N.P
.S.H
Met
res
174
152
130
163
141
1
2
3
4
5
6
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
15
APEXPUMPS
65 40 12 bar TD 40-200
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
2900
214
192
170
61
45 5054
59
59
55
203
181
57
57
60
60
56
25
30
35
40
45
50
55
60
65
70
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Tot
al H
ead
Met
res
Impe
ller
dia
mm
2
3
4
5
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
N.P
.S.H
Met
res
214
192
170
203
181
1
2
3
4
5
6
7
8
9
10
11
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
APEXPUMPS
16
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
294065 40 12 bar TD 40-250
264
234
204
55
40 44 4852
52
44
249
219
50
50
53
53
47
30
40
50
60
70
80
90
100
0 2 4 6 8 10 12 14 16 18
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
2
3
4
5
0 2 4 6 8 10 12 14 16 18
N.P
.S.H
Met
res
264
234
204
249
219
4
6
8
10
12
14
16
18
20
22
24
0 2 4 6 8 10 12 14 16 18Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
17
APEXPUMPS
APEX PUMPS MORLEY ROAD STAPLE HILL BRISTOL BS16 4QT TEL:0117 907 7555 FAX: 0117 907 755665 40 16 bar TD 40-315
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
2940
329
293
257
39.5
28 3235
38
38
36
311
275
37
37
39
39
60
70
80
90
100
110
120
130
140
150
160
170
0 1 2 3 4 5 6 7 8 9 10 11 12 13
Tot
al H
ead
Met
res
Impe
ller
dia
mm
.
3
4
5
6
7
0 1 2 3 4 5 6 7 8 9 10 11 12 13
N.P
.S.H
Met
res
329
293
257
311
275
5
10
15
20
25
30
35
0 1 2 3 4 5 6 7 8 9 10 11 12 13
Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
APEXPUMPS
18
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
290065 50 12 bar TD 50-125
139
125
111
76
58 6570
74
74
71
132
118
72
72
75
75
10
12
14
16
18
20
22
24
26
28
0 2 4 6 8 10 12 14 16 18 20 22 24
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
2
3
4
5
6
0 2 4 6 8 10 12 14 16 18 20 22 24
N.P
.S.H
Met
res
139
125
111
132
118
1
2
3
4
5
6
0 2 4 6 8 10 12 14 16 18 20 22 24Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
19
APEXPUMPS
65 50 12 bar TD 50-160
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
2900
174
156
138
76
6067
71
75
75
72
165
147
73
73
76
76
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
.
2
4
6
8
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28
N.P
.S.H
Met
res
174
156
138
165
147
1
2
3
4
5
6
7
8
9
10
11
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
APEXPUMPS
20
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
294065 50 12 bar TD 50-200
214
192
170
68
55 59 62
66
66
62
203
181
64
64
67
67
25
30
35
40
45
50
55
60
65
70
0 2 4 6 8 10 12 14 16 18 20 22 24
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
.
2
4
6
0 2 4 6 8 10 12 14 16 18 20 22 24
N.P
.S.H
Met
res
214
192
170
203
181
2
4
6
8
10
12
14
16
0 2 4 6 8 10 12 14 16 18 20 22 24Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
21
APEXPUMPS
65 50 12 bar TD 50-250
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
2940
264
236
208
63
46 51 55
60
60
55
250
222
58
58
62
62
40
45
50
55
60
65
70
75
80
85
90
95
100
105
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
.
2
4
6
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28
N.P
.S.H
Met
res
264
236
208
250
222
5
10
15
20
25
30
35
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
APEXPUMPS
22
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
296565 50 12 bar TE 50-315
329
297
265
313
281
10
20
30
40
50
60
70
0 5 10 15 20 25 30 35 40
Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
329
297
265
64
48 53 57
62
62
59
313
281
60
60
63
63
70
80
90
100
110
120
130
140
150
160
0 5 10 15 20 25 30 35 40
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
5
6
7
8
0 5 10 15 20 25 30 35 40
N.P
.S.H
Met
res
23
APEXPUMPS
80 65 12 bar TD 65-125
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
2900
139
131
123
76
6065
69
73
73
68
135
127
71
71
74
74
70
12
14
16
18
20
22
24
26
0 5 10 15 20 25 30 35 40
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
2
3
4
5
6
0 5 10 15 20 25 30 35 40
N.P
.S.H
Met
res
139
131
123
135
127
2
3
4
5
6
7
8
0 5 10 15 20 25 30 35 40
Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
APEXPUMPS
24
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
290080 65 12 bar TD 65-160
174
154
134
80
52 61 67
75
75
68
164
144
71
71
78
78
10
15
20
25
30
35
40
45
0 10 20 30 40 50
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
2
4
6
8
0 10 20 30 40 50
N.P
.S.H
Met
res
174
154
134
164
144
2
4
6
8
10
12
14
16
0 10 20 30 40 50Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
25
APEXPUMPS
80 65 12 bar TD 65-200
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
2940
214
190
166
77
6066
70
74
74
69
202
178
72
72
76
76
25
30
35
40
45
50
55
60
65
70
0 10 20 30 40 50
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
2
4
6
8
10
0 10 20 30 40 50
N.P
.S.H
Met
res
214
190
166
202
178
0
5
10
15
20
25
30
35
0 10 20 30 40 50Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
APEXPUMPS
26
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
296580 65 12 bar TD 65-250
264
236
208
76
60 6569
74
74
71
250
222
72
72
75
75
40
50
60
70
80
90
100
110
0 10 20 30 40 50
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
0
2
4
6
8
10
0 10 20 30 40 50
N.P
.S.H
Met
res
264
236
208
250
222
5
10
15
20
25
30
35
40
45
50
0 10 20 30 40 50Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
27
APEXPUMPS
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
297080 65 16 bar TE 65-315
329
297
265
64
51 55 58
62
62
59
313
281
60
6063
63
70
80
90
100
110
120
130
140
150
160
0 10 20 30 40 50
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
2
4
6
8
0 10 20 30 40 50
N.P
.S.H
Met
res
329
297
265
313
281
20
30
40
50
60
70
80
90
100
0 10 20 30 40 50Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
APEXPUMPS
28
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
2940100 80 12 bar TD 80-160
174
162
150
83
6369
74
79
79
73
168
156
77
77
81
81
75
18
20
22
24
26
28
30
32
34
36
38
40
42
0 10 20 30 40 50 60 70 80
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
2
4
6
8
0 10 20 30 40 50 60 70 80
N.P
.S.H
Met
res
174
162
150
168
156
5
10
15
20
25
0 10 20 30 40 50 60 70 80
Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
29
APEXPUMPS
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
2965100 80 12 bar TD 80-200
214
194
174
79
6067
72
77
77
71
204
184
75
75
78
78
73
30
35
40
45
50
55
60
65
70
0 10 20 30 40 50 60 70
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
2
4
6
8
0 10 20 30 40 50 60 70
N.P
.S.H
Met
res
214
194
174
204
184
5
10
15
20
25
30
35
40
45
50
0 10 20 30 40 50 60 70
Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
APEXPUMPS
30
100 80 12 bar TD 80-250
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
2965
264
240
216
79
6069
74
77
77
74
252
228
76
76
78
78
75
45
50
55
60
65
70
75
80
85
90
95
100
105
0 10 20 30 40 50 60 70 80
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
2
4
6
8
10
0 10 20 30 40 50 60 70 80
N.P
.S.H
Met
res
264
240
216
252
228
10
20
30
40
50
60
70
80
0 10 20 30 40 50 60 70 80
Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
31
APEXPUMPS
100 80 16 bar TE 80-315
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
2970
329
305
281
72
58 6266
70
70
68
317
293
69
69
72
72
85
90
95
100
105
110
115
120
125
130
135
140
145
150
155
0 10 20 30 40 50 60 70
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
3
4
5
6
7
8
0 10 20 30 40 50 60 70
N.P
.S.H
Met
res
20
30
40
50
60
70
80
90
100
110
0 10 20 30 40 50 60 70
Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
APEXPUMPS
32
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
2940125 100 12 bar TD 100-160
174
164
154
169
159
10
15
20
25
30
0 10 20 30 40 50 60 70 80 90 100 110
Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
174
164
154
71
5761
64
68
68
61
169
159
66
66
70
70
64
10
15
20
25
30
35
0 10 20 30 40 50 60 70 80 90 100 110
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
4
5
6
7
0 10 20 30 40 50 60 70 80 90 100 110
N.P
.S.H
Met
res
33
APEXPUMPS
125 100 12 bar TD 100-200
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
2965
214
198
182
80
6570
74
78
78
74
206
190
76
76
79
79
30
35
40
45
50
55
60
65
70
0 10 20 30 40 50 60 70 80 90 100 110
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
2
4
6
8
0 10 20 30 40 50 60 70 80 90 100 110
N.P
.S.H
Met
res
214
198
182
206
190
10
20
30
40
50
60
0 10 20 30 40 50 60 70 80 90 100 110
Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
APEXPUMPS
34
125 100 12 bar TE 100-250
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
2970
264
240
216
83
7075
78
81
81
78
252
228
80
82
82
79
45
50
55
60
65
70
75
80
85
90
95
100
105
110
0 10 20 30 40 50 60 70 80 90 100 110 120
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
2
4
6
8
10
0 10 20 30 40 50 60 70 80 90 100 110 120
N.P
.S.H
Met
res
264
240
216
252
228
20
30
40
50
60
70
80
90
100
110
0 10 20 30 40 50 60 70 80 90 100 110 120
Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
35
APEXPUMPS
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
2950125 100 16 bar TE 100-315
329
305
281
78
6670
73
76
76
73
317
293
75
75
77
77
74
80
85
90
95
100
105
110
115
120
125
130
135
140
145
150
155
0 10 20 30 40 50 60 70 80 90 100
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
5
6
7
8
9
0 10 20 30 40 50 60 70 80 90 100
N.P
.S.H
Met
res
30
40
50
60
70
80
90
100
110
120
130
140
0 10 20 30 40 50 60 70 80 90 100
Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
APEXPUMPS
36
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
2970150 125 12 bar TD 125-200
214
204
19472
6064
67
70
70
67
209
199
69
69
71
71
68
25
30
35
40
45
50
55
60
65
0 20 40 60 80 100 120 140 160
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
6
7
8
9
0 20 40 60 80 100 120 140 160
N.P
.S.H
Met
res
214
204
194
209
199
40
50
60
70
80
0 20 40 60 80 100 120 140 160
Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
37
APEXPUMPS
50 32 12 bar TD 32-125
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1410
139
121
103
130
112
0.05
0.10
0.15
0.20
0.25
0.30
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
121
103
48
30 34 37
43
43
37
130
112
40
40
46
46
139
1
2
3
4
5
6
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
0
1
2
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5
N.P
.S.H
Met
res
APEXPUMPS
38
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
141050 32 12 bar TD 32-160
174
152
130
163
141
0.05
0.10
0.15
0.20
0.25
0.30
0.35
0.40
0.45
0.50
0.55
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
152
130
49
28 34 39
46
46
39
163
141 43
43
48
48
174
3
4
5
6
7
8
9
10
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
0
1
2
3
4
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
N.P
.S.H
Met
res
39
APEXPUMPS
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
141050 32 12 bar TD 32-200
214
190
166
202
178
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
190
166
51
36 4044
47
47
44
202
178
49
49
214
5
6
7
8
9
10
11
12
13
14
15
16
17
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
N.P
.S.H
Met
res
APEXPUMPS
40
50 32 12 bar TD 32-250
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1420
264
236
208
250
222
0.5
1.0
1.5
2.0
0 1 2 3 4 5 6Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
236
208
42
29 3337
33
250
222
41
41
37
40
40
264
8
10
12
14
16
18
20
22
24
26
0 1 2 3 4 5 6
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
4
5
0 1 2 3 4 5 6
N.P
.S.H
Met
res
41
APEXPUMPS
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
141065 40 12 bar TD 40-125
139
125
111
132
118
0.05
0.10
0.15
0.20
0.25
0.30
0.35
0.40
0.45
0.50
0 1 2 3 4 5 6 7 8Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
125
111
68
40 5058
60
132
11864
64
66
66
139
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
0 1 2 3 4 5 6 7 8
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
0
1
2
3
0 1 2 3 4 5 6 7 8
N.P
.S.H
Met
res
APEXPUMPS
42
65 40 12 bar TD 40-160
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1410
174
154
134
164
144
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0 1 2 3 4 5 6Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
154
134
62
40 4552
58
58
53
164
144
55
5560
60
174
3
4
5
6
7
8
9
10
11
0 1 2 3 4 5 6
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
0
1
2
3
0 1 2 3 4 5 6
N.P
.S.H
Met
res
43
APEXPUMPS
65 40 12 bar TD 40-200
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1420
214
190
166
202
178
0.2
0.4
0.6
0.8
1.0
1.2
1.4
0 1 2 3 4 5 6 7Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
190
166
56
41 4650
54
54
50
202
178
52
52
55
55
214
6
7
8
9
10
11
12
13
14
15
16
17
0 1 2 3 4 5 6 7
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
0 1 2 3 4 5 6 7
N.P
.S.H
Met
res
APEXPUMPS
44
65 40 12 bar TD 40-250
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1420
264
236
208
250
222
0.5
1.0
1.5
2.0
2.5
3.0
0 1 2 3 4 5 6 7 8 9Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
236
208
52
40 4346
50
50
46
250
222
49
49
51
51
47
264
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
0 1 2 3 4 5 6 7 8 9
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
4
0 1 2 3 4 5 6 7 8 9
N.P
.S.H
Met
res
45
APEXPUMPS
65 40 12 bar TD 40-315
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1450
329
293
257
311
275
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
0 1 2 3 4 5 6Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
293
257
38
27 30 3336
36
33
311
275
35
35
37
37
34
329
14
16
18
20
22
24
26
28
30
32
34
36
38
40
0 1 2 3 4 5 6
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
2
3
4
0 1 2 3 4 5 6
N.P
.S.H
Met
res
APEXPUMPS
46
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
141065 50 12 bar TD 50-125
139
131
123
135
127
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0 1 2 3 4 5 6 7 8 9 10 11 12Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
131
123
76
50 5868
62
135
127
72
72
74
74
68
139
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
0 1 2 3 4 5 6 7 8 9 10 11 12
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
4
0 1 2 3 4 5 6 7 8 9 10 11 12
N.P
.S.H
Met
res
47
APEXPUMPS
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
142065 50 12 bar TD 50-160
174
156
138
165
147
0.2
0.4
0.6
0.8
1.0
1.2
1.4
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
156
138
75
53 60 6672
72
68
165
147
70
70
74
74
174
4
5
6
7
8
9
10
11
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
4
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
N.P
.S.H
Met
res
APEXPUMPS
48
65 50 12 bar TD 50-200
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1420
214
190
166
202
178
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
0 1 2 3 4 5 6 7 8 9 10 11 12 13
Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
214
190
166
65
5055
59
63
63
58
202
178
62
62
64
64
60
5
6
7
8
9
10
11
12
13
14
15
16
0 1 2 3 4 5 6 7 8 9 10 11 12 13
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
4
0 1 2 3 4 5 6 7 8 9 10 11 12 13
N.P
.S.H
Met
res
49
APEXPUMPS
65 50 12 bar TD 50-250
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1440
264
236
208
250
222
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
264
236
208
64
52 5659
62
62
57
250
222
61
61
63
63
59
10
12
14
16
18
20
22
24
26
28
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
4
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
N.P
.S.H
Met
res
APEXPUMPS
50
65 50 12 bar TD 50-315
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1450
329
293
257
311
275
1
2
3
4
5
6
7
8
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
329
293
257
64
50 54 5761
61
57
311
27560
60
62
62
14
16
18
20
22
24
26
28
30
32
34
36
38
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
N.P
.S.H
Met
res
51
APEXPUMPS
80 65 12 bar TD 65-125
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1420
139
133
127
136
130
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
133
127
69
5862
6567
67
65
136
13068
68
66
139
4.0
4.5
5.0
5.5
6.0
6.5
7.0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
N.P
.S.H
Met
res
APEXPUMPS
52
80 65 12 bar TD 65-160
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1420
174
160
146
167
153
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
0 2 4 6 8 10 12 14 16 18 20 22 24Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
160
146
81
6068
7377
77
70
167
153 79
79
73
174
4
5
6
7
8
9
10
11
0 2 4 6 8 10 12 14 16 18 20 22 24
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
0 2 4 6 8 10 12 14 16 18 20 22 24
N.P
.S.H
Met
res
53
APEXPUMPS
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
144080 65 12 bar TD 65-200
214
190
166
202
178
0
1
2
3
4
0 2 4 6 8 10 12 14 16 18 20 22 24 26
Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
214
190
166
78
60 6571
76
76
71
202
178
74
74
77
77
5
6
7
8
9
10
11
12
13
14
15
16
17
0 2 4 6 8 10 12 14 16 18 20 22 24 26
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
4
0 2 4 6 8 10 12 14 16 18 20 22 24 26
N.P
.S.H
Met
res
APEXPUMPS
54
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
145080 65 12 bar TD 65-250
264
236
208
250
222
1
2
3
4
5
6
7
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28
Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
264
236
208
76
60 6569
73
73
66
250
222
71
71
75
75
69
10
12
14
16
18
20
22
24
26
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
2
3
4
5
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28
N.P
.S.H
Met
res
55
APEXPUMPS
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
145080 65 12 bar TD 65-315
329
293
257
311
275
2
3
4
5
6
7
8
9
10
11
0 2 4 6 8 10 12 14 16 18 20 22 24 26Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
329
293
257
65
50 55 5963
63
57
311
275
62
62
64
64
60
14
16
18
20
22
24
26
28
30
32
34
36
38
40
0 2 4 6 8 10 12 14 16 18 20 22 24 26
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
0
1
2
3
0 2 4 6 8 10 12 14 16 18 20 22 24 26
N.P
.S.H
Met
res
APEXPUMPS
56
100 80 12 bar TD 80-160
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1420
174
160
146
167
153
0.5
1.0
1.5
2.0
2.5
3.0
0 5 10 15 20 25 30 35Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
174
160
146
79
65 7074
77
77
73
167
153
76
76
78
78
75
4
5
6
7
8
9
10
0 5 10 15 20 25 30 35
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
2
3
4
5
0 5 10 15 20 25 30 35
N.P
.S.H
Met
res
57
APEXPUMPS
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1450100 80 12 bar TD 80-200
214
190
166
202
178
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
0 5 10 15 20 25 30 35 40Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
214
190
166
81
65 70 74
79
79
75
202
178
77
77
80
80
6
7
8
9
10
11
12
13
14
15
16
17
0 5 10 15 20 25 30 35 40
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
2
3
4
0 5 10 15 20 25 30 35 40
N.P
.S.H
Met
res
APEXPUMPS
58
100 80 12 bar TD 80-250
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1450
264
236
208
250
222
1
2
3
4
5
6
7
8
9
0 5 10 15 20 25 30 35 40Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
264
236
208
74
60 6568
72
72
68
250
222
70
70
73
73
10
12
14
16
18
20
22
24
26
0 5 10 15 20 25 30 35 40
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
2
3
4
0 5 10 15 20 25 30 35 40
N.P
.S.H
Met
res
59
APEXPUMPS
100 80 12 bar TD 80-315
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1470
329
293
257
311
275
2
4
6
8
10
12
14
16
0 5 10 15 20 25 30 35 40Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
329
293
257
74
60 65 68
72
72
68
311
275
70
70
73
73
15
20
25
30
35
40
0 5 10 15 20 25 30 35 40
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
4
0 5 10 15 20 25 30 35 40
N.P
.S.H
Met
res
APEXPUMPS
60
100 80 12 bar TD 80-400
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1475
409
365
321
387
343
5
10
15
20
25
30
0 5 10 15 20 25 30 35 40 45Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
409
365
321
67
50 56 6064
64
58
387
343
62
62
66
66
60
20
25
30
35
40
45
50
55
60
65
0 5 10 15 20 25 30 35 40 45
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
4
0 5 10 15 20 25 30 35 40 45
N.P
.S.H
Met
res
61
APEXPUMPS
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1440125 100 12 bar TD 100-160
174
164
154
169
159
1.0
1.5
2.0
2.5
3.0
3.5
0 10 20 30 40 50
Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
174
164
154
71
5660
63
68
68
60
169
159
66
66
69
69
63
3
4
5
6
7
8
9
0 10 20 30 40 50
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
4
0 10 20 30 40 50
N.P
.S.H
Met
res
APEXPUMPS
62
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1450125 100 12 bar TD 100-200
214
194
174
204
184
1
2
3
4
5
6
7
8
0 10 20 30 40 50 60Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
214
194
174
79
66 70 72
76
76
70
204
184
74
74
77
77
72
6
7
8
9
10
11
12
13
14
15
16
17
0 10 20 30 40 50 60
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
4
0 10 20 30 40 50 60
N.P
.S.H
Met
res
63
APEXPUMPS
125 100 16 bar TD 100-250
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1470
264
236
208
250
222
2
4
6
8
10
12
14
0 10 20 30 40 50 60Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
264
236
208
81
6069
74
79
79
74
250
222
77
77
80
80
10
12
14
16
18
20
22
24
26
28
0 10 20 30 40 50 60
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
4
0 10 20 30 40 50 60
N.P
.S.H
Met
res
APEXPUMPS
64
125 100 12 bar TD 100-315
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1470
329
293
257
311
275
0
5
10
15
20
0 10 20 30 40 50Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
329
293
257
75
55 62 6873
73
69
311
275
71
71
74
74
70
16
18
20
22
24
26
28
30
32
34
36
38
40
0 10 20 30 40 50
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
0 10 20 30 40 50
N.P
.S.H
Met
res
65
APEXPUMPS
125 100 12 bar TD 100-400
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1475
409
365
321
387
343
5
10
15
20
25
30
35
40
0 10 20 30 40 50 60Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
409
365
321
68
50 55 5864
64
58
387
343
61
61
66
66
25
30
35
40
45
50
55
60
65
0 10 20 30 40 50 60
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
2
3
4
5
0 10 20 30 40 50 60
N.P
.S.H
Met
res
APEXPUMPS
66
150 125 12 bar TD 125-200
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1450
214
202
190
208
196
3
4
5
6
7
8
9
10
11
0 10 20 30 40 50 60 70Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
214
202
190
75
5563 67
72
72
66
208
196
70
70
74
74
68
7
8
9
10
11
12
13
14
15
16
0 10 20 30 40 50 60 70
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
4
0 10 20 30 40 50 60 70
N.P
.S.H
Met
res
67
APEXPUMPS
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1470150 125 12 bar TD 125-250
264
236
208
250
222
2
4
6
8
10
12
14
16
18
20
0 10 20 30 40 50 60 70 80 90Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
264
236
208
81
60 67 72
78
78
69
250
222
75
75
80
80
72
8
10
12
14
16
18
20
22
24
26
0 10 20 30 40 50 60 70 80 90
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
0
2
4
6
8
0 10 20 30 40 50 60 70 80 90
N.P
.S.H
Met
res
APEXPUMPS
68
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1475150 125 12 bar TD 125-315
329
293
257
311
275
4
6
8
10
12
14
16
18
20
22
24
26
28
0 10 20 30 40 50 60 70 80Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
329
293
257
78
6066
70
75
75
70
311
275
73
73
76
76
14
16
18
20
22
24
26
28
30
32
34
36
38
40
0 10 20 30 40 50 60 70 80
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
4
5
0 10 20 30 40 50 60 70 80
N.P
.S.H
Met
res
69
APEXPUMPS
150 125 12 bar TD 125-400
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1475
409
369
329
389
349
5
10
15
20
25
30
35
40
45
50
55
0 10 20 30 40 50 60 70 80 90Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
409
369
329
77
58 64 6874
74
69
389
349
71
71
76
76
25
30
35
40
45
50
55
60
0 10 20 30 40 50 60 70 80 90
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
4
5
0 10 20 30 40 50 60 70 80 90
N.P
.S.H
Met
res
APEXPUMPS
70
200 150 12 bar TD 150-200
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1470
220
206
192
213
199
4
6
8
10
12
14
16
18
0 20 40 60 80 100 120 140
Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
220
206
192
78
62 6771
75
75
68
213
199
73
73
76
76
71
6
7
8
9
10
11
12
13
14
15
0 20 40 60 80 100 120 140
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
2
3
4
5
6
0 20 40 60 80 100 120 140
N.P
.S.H
Met
res
71
APEXPUMPS
200 150 12 bar TD 150-250
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1475
264
248
232
256
240
6
8
10
12
14
16
18
20
22
24
26
28
0 20 40 60 80 100 120Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
264
248
232
81
62 68 7378
78
71
256
240
76
76
80
80
74
13
14
15
16
17
18
19
20
21
22
23
24
25
0 20 40 60 80 100 120
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
4
5
0 20 40 60 80 100 120
N.P
.S.H
Met
res
APEXPUMPS
72
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1475200 150 12 bar TD 150-315
329
293
257
311
275
5
10
15
20
25
30
35
40
45
50
0 20 40 60 80 100 120 140Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
329
293
257
81
62 68 7378
78
71
311
275
76
76
80
80
74
14
16
18
20
22
24
26
28
30
32
34
36
38
0 20 40 60 80 100 120 140
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
4
5
0 20 40 60 80 100 120 140
N.P
.S.H
Met
res
73
APEXPUMPS
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1475200 150 12 bar TD 150-400
409
365
321
387
343
10
20
30
40
50
60
70
80
0 20 40 60 80 100 120 140 160
Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
409
365
321
81
62 68 7378
78
73
387
343
76
76
80
80
75
20
30
40
50
60
0 20 40 60 80 100 120 140 160
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
1
2
3
4
5
0 20 40 60 80 100 120 140 160
N.P
.S.H
Met
res
APEXPUMPS
74
250 200 12 bar TD 200-250
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1475
264
250
236
257
243
15
20
25
30
35
40
45
50
0 20 40 60 80 100 120 140 160 180 200 220 240 260Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
264
250
236
80
60 65 70
76
76
70
257
243
74
74
78
78
72
10
12
14
16
18
20
22
0 20 40 60 80 100 120 140 160 180 200 220 240 260
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
2
3
4
5
0 20 40 60 80 100 120 140 160 180 200 220 240 260
N.P
.S.H
Met
res
75
APEXPUMPS
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1475250 200 12 bar TD 200-315
329
307
285
318
296
20
30
40
50
60
0 20 40 60 80 100 120 140 160 180 200 220 240Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
329
307
285
83
64 6974
79
79
69
318
296
77
77
81
81
74
10
12
14
16
18
20
22
24
26
28
30
32
34
36
0 20 40 60 80 100 120 140 160 180 200 220 240
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
2
3
4
5
6
0 20 40 60 80 100 120 140 160 180 200 220 240
N.P
.S.H
Met
res
APEXPUMPS
76
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1480250 200 12 bar TD 200-400
409
373
337
355
391
20
30
40
50
60
70
80
90
100
110
120
0 20 40 60 80 100 120 140 160 180 200 220 240
Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
409
373
337
86.3
70 75 78
83
83
74
85
85
78
81
81
391
355
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
0 20 40 60 80 100 120 140 160 180 200 220 240
Tot
al H
ead
Met
res
Impe
ller
dia
mm
.
2
3
4
5
0 20 40 60 80 100 120 140 160 180 200 220 240
N.P
.S.H
Met
res
77
APEXPUMPS
300 250 12 bar TD 250-315
Issue 1.4HORIZONTAL END-SUCTION
PUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1475
329
307
285
318
296
25
30
35
40
45
50
55
60
65
70
75
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
329
307
285
87.4
68 74 7984
84
75
318
296
82
82
86
86
79
12
14
16
18
20
22
24
26
28
30
32
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
Tota
l Hea
d M
etre
s
Impe
ller
dia
mm
3
4
5
6
7
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
N.P
.S.H
Met
res
APEXPUMPS
78
Issue 1.4 HORIZONTAL END-SUCTIONPUMP PERFORMANCE CURVE APEXPUMPS
SUCTION DIA DISCHARGE DIA MAX PRESSURE PUMP MODEL SPEED
1480300 250 12 bar TD 250-400
409
371
333
390
352
20
40
60
80
100
120
140
160
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300 320Flow L/Sec
Pow
er k
W
Based on Specific gravity: 1.0
409
371
333
87.5
68 74 7984
84
390
352
82
86
86
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300 320
Tota
l Hea
d M
etre
s
Impe
ller d
ia m
m
3
4
5
6
7
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300 320
N.P
.S.H
Met
res
79
APEXPUMPS
H1
H2
A F
WH0
IN
OUT
N4
N2
N1
N3 B
M1
M2
2 HOLES 14 Ø4 HOLES S Ø
Hf
L
DG1
G1
G2G2
Pump size
Shaft group
Flanges
Outline Dimensions Foot Dimensions Rear Support Foot Shaft Tappings Mass
IN OUT A F H1 H2 N1 N2 M1 M2 B S H0 W N3 N4 Hf L D G1 G2 Kg
32-125 1 50 32 80 360 112 140 190 140 100 70 50 14 14 267 130 100 5 50 24 1/4 1/4 27 32-160 1 50 32 80 360 132 160 240 190 100 70 50 14 14 267 130 100 5 50 24 1/4 1/4 35 32-200 1 50 32 80 360 160 180 240 190 100 70 50 14 14 267 140 110 5 50 24 1/4 1/4 43 32-250 1 50 32 100 360 180 225 320 250 125 95 65 14 14 267 140 110 5 50 24 1/4 3/8 61
40-125 1 65 40 80 360 112 140 210 160 100 70 50 14 14 267 130 100 5 50 24 1/4 1/4 32 40-160 1 65 40 80 360 132 160 240 190 100 70 50 14 14 267 130 100 5 50 24 1/4 1/4 38 40-200 1 65 40 100 360 160 180 265 212 100 70 50 14 14 267 140 110 5 50 24 1/4 1/4 46 40-250 1 65 40 100 360 180 225 320 250 125 95 65 14 14 267 140 110 5 50 24 1/4 3/8 63 40-315 2 65 40 125 470 200 250 345 280 125 95 65 14 14 342 140 110 5 80 32 1/4 3/8 94
50-125 1 65 50 100 360 132 160 240 190 100 70 50 14 14 267 140 100 5 50 24 1/4 1/4 34 50-160 1 65 50 100 360 160 180 265 212 100 70 50 14 14 267 140 110 5 50 24 1/4 3/8 38 50-200 1 65 50 100 360 160 200 265 212 100 70 50 14 14 267 140 110 5 50 24 1/4 1/4 46 50-250 1 65 50 100 360 180 225 320 250 125 95 65 14 14 267 140 110 5 50 24 1/4 3/8 63 50-315 2 65 50 125 470 225 280 345 280 125 95 65 14 16 342 140 110 5 80 32 1/4 3/8 96
65-125 1 80 65 100 360 160 180 280 212 125 95 65 14 14 267 140 110 5 50 24 1/4 1/4 39 65-160 1 80 65 100 360 160 200 280 212 125 95 65 14 14 267 140 110 5 50 24 1/4 3/8 45 65-200 1 80 65 100 360 180 225 320 250 125 95 65 14 14 267 140 110 5 50 24 1/4 3/8 54 65-250 2 80 65 100 470 200 250 360 280 160 120 80 18 16 342 140 110 5 80 32 1/4 3/8 86 65-315 2 80 65 125 470 225 280 400 315 160 120 80 18 16 342 140 110 5 80 32 1/4 3/8 104
80-160 1 100 80 125 360 180 225 320 250 125 95 65 14 14 267 140 110 5 80 32 1/4 3/8 54 80-200 2 100 80 125 470 180 250 345 280 125 95 65 14 14 342 140 110 5 80 32 1/4 3/8 71 80-250 2 100 80 125 470 200 280 400 315 160 120 80 18 16 342 140 110 5 80 32 1/4 3/8 91 80-315 2 100 80 125 470 250 315 400 315 160 120 80 18 16 342 140 110 5 80 32 3/8 3/8 104 80-400 3 100 80 125 530 280 355 440 340 160 120 85 18 16 370 140 110 5 110 42 3/8 3/8 162
100-160 2 125 100 125 470 180 250* 360 280 160 120 80 18 16 342 140 110 5 80 32 1/4 3/8 81 100-200 2 125 100 125 470 200 280 360 280 160 120 80 18 16 342 140 110 5 80 32 1/4 3/8 88 100-250 2 125 100 140 470 225 280 400 315 160 120 80 18 16 342 140 110 5 80 32 3/8 3/8 110 100-315 2 125 100 140 470 250 315 400 315 160 120 80 18 16 342 140 110 5 80 32 3/8 3/8 120 100-400 3 125 100 140 530 280 355 500 400 200 150 100 23 18 370 140 110 5 110 42 3/8 3/8 122
125-200 2 150 125 140 470 250 315 400 315 160 120 80 18 16 342 140 110 5 80 32 3/8 3/8 98 125-250 2 150 125 140 470 250 355 400 315 160 120 80 18 16 342 140 110 5 80 32 3/8 3/8 115 125-315 3 150 125 140 530 280 355 500 400 200 150 100 23 18 370 140 110 5 110 42 3/8 3/8 155 125-400 3 150 125 140 530 315 400 500 400 200 150 100 23 18 370 140 110 5 110 42 3/8 3/8 189
150-200 2a 200 150 160 500 280 400 550 450 200 150 100 23 20 342 140 110 5 80 32 1/4 3/8 114 150-250 3 200 150 160 530 250 355 450 350 200 150 100 23 20 370 140 110 5 110 42 3/8 3/8 150 150-315 3 200 150 160 530 280 400 550 450 200 150 100 23 20 370 140 110 5 110 42 3/8 3/8 175 150-400 3 200 150 160 530 315 450 550 450 200 150 100 23 20 370 140 110 5 110 42 3/8 3/8 200
200-250 3 250 200 180 553 315 450 550 450 200 150 100 23 20 393 140 110 5 110 42 3/8 3/8 230 200-315 4 250 200 180 670 315 480 600 480 220 170 120 28 20 504 140 110 5 110 48 3/8 3/8 251 200-400 4 250 200 180 670 335 480 600 480 220 170 120 28 20 504 140 110 5 110 48 3/8 3/8 295
250-315 4 300 250 220 691 355 520 660 510 250 200 150 28 22 525 140 110 5 110 48 3/8 3/8 311 250-400 4 300 250 220 682 400 560 660 510 250 200 150 28 22 516 140 110 5 110 48 3/8 3/8 390
TD Bareshaft pump dimensions
APEXPUMPS
80
Pump & Motor Pump dimensions Bedplate dimensions TD
Pump 1450 rpm
2900 rpm
In Out a F H1 H2 Bed ref
H0 A L1 L2 B1 B2 B3 d X Lm dB Kg
32-125 0.55 50 32 80 360 112 140 2a 75 60 800 130 260 360 320 18 100 269 55 74 0.75 50 32 80 360 112 140 2a 75 60 800 130 260 360 320 18 100 269 65 74 1.1 50 32 80 360 112 140 2a 75 60 800 130 260 360 320 18 100 269 65 74 1.5 50 32 80 360 112 140 2a 75 60 800 130 260 360 320 18 100 294 68 76 2.2 50 32 80 360 112 140 2a 75 60 800 130 260 360 320 18 100 294 68 90
32-160 0.55 50 32 80 360 132 160 2a 75 60 800 130 260 360 320 18 100 269 55 82 1.5 50 32 80 360 132 160 2a 75 60 800 130 260 360 320 18 100 294 68 84 2.2 50 32 80 360 132 160 2a 75 60 800 130 260 360 320 18 100 294 68 96 3.0 50 32 80 360 132 160 3a 75 60 900 150 290 390 350 18 100 365 65 109 4.0 50 32 80 360 132 160 3a 75 60 900 150 290 390 350 18 100 365 68 112
32-200 0.55 50 32 80 360 160 180 2a 75 60 800 130 260 360 320 18 100 269 55 90 0.75 50 32 80 360 160 180 2a 75 60 800 130 260 360 320 18 100 269 55 90 1.1 50 32 80 360 160 180 2a 75 60 800 130 260 360 320 18 100 294 57 92 4.0 50 32 80 360 160 180 3a 75 60 900 150 290 390 350 18 100 365 68 120 5.5 50 32 80 360 160 180 4a 75 60 1000 170 350 450 400 22 100 450 74 146 7.5 50 32 80 360 160 180 4a 75 60 1000 170 350 450 400 22 100 450 74 146
32-250 1.1 50 32 100 360 180 225 4b 75 75 1000 170 350 450 400 22 100 294 57 129 1.5 50 32 100 360 180 225 4b 75 75 1000 170 350 450 400 22 100 294 57 131 2.2 50 32 100 360 180 225 4b 75 75 1000 170 350 450 400 22 100 365 58 142 11.0 50 32 100 360 180 225 5b 100 75 1120 190 360 490 450 22 100 594 77 218 15.0 50 32 100 360 180 225 5b 100 75 1120 190 360 490 450 22 100 594 77 218 18.5 50 32 100 360 180 225 5b 100 75 1120 190 360 490 450 22 100 594 77 232
40-125 0.55 65 40 80 360 112 140 2a 75 60 800 130 260 360 320 18 100 269 55 79 1.5 65 40 80 360 112 140 2a 75 60 800 130 260 360 320 18 100 294 68 81 2.2 65 40 80 360 112 140 2a 75 60 800 130 260 360 320 18 100 294 68 95 3.0 65 40 80 360 112 140 3a 75 60 900 150 290 390 350 18 100 365 65 106 4.0 65 40 80 360 112 140 3a 75 60 900 150 290 390 350 18 100 365 68 109
40-160 0.55 65 40 80 360 132 160 2a 75 60 800 130 260 360 320 18 100 269 55 85 0.75 65 40 80 360 132 160 2a 75 60 800 130 260 360 320 18 100 269 55 85 1.1 65 40 80 360 132 160 2a 75 60 800 130 260 360 320 18 100 294 57 77 3.0 65 40 80 360 132 160 3a 75 60 900 150 290 390 350 18 100 365 65 90 4.0 65 40 80 360 132 160 3a 75 60 900 150 290 390 350 18 100 365 68 94 5.5 65 40 80 360 132 160 4a 75 60 1000 170 350 450 400 22 100 450 74 115 7.5 65 40 80 360 132 160 4a 75 60 1000 170 350 450 400 22 100 450 74 115
40-200 0.75 65 40 100 360 160 180 3a 75 60 900 150 290 390 350 18 100 269 55 84 1.1 65 40 100 360 160 180 3a 75 60 900 150 290 390 350 18 100 294 57 87 1.5 65 40 100 360 160 180 3a 75 60 900 150 290 390 350 18 100 294 57 88 5.5 65 40 100 360 160 180 4a 75 60 1000 170 350 450 400 22 100 450 74 123 7.5 65 40 100 360 160 180 4a 75 60 1000 170 350 450 400 22 100 450 74 123 11 65 40 100 360 160 180 5a 100 60 1120 190 360 490 440 22 100 594 77 175
40-250 1.5 65 40 100 360 180 225 4b 75 75 1000 170 350 450 400 22 100 294 57 120 2.2 65 40 100 360 180 225 4b 75 75 1000 170 350 450 400 22 100 365 58 130 3.0 65 40 100 360 180 225 4b 75 75 1000 170 350 450 400 22 100 365 58 130 11 65 40 100 360 180 225 5b 100 75 1120 190 360 490 440 22 100 594 77 203 15 65 40 100 360 180 225 5b 100 75 1120 190 360 490 440 22 100 594 77 203
22 65 40 100 360 180 225 5b 100 75 1120 190 360 490 440 22 100 594 77 230 18.5 65 40 100 360 180 225 5b 100 75 1120 190 360 490 440 22 100 594 77 217
B2
B1
L1
L2 L2
A
4 HOLES d Ø
a F X Lm
H0
H1
H2
IN
OUTX = 25 for non-spacer coupling
B3
TD pumpset dimensions
Dimensions are for indication only. Certified drawings are avail-able for installation purposes.
81
APEXPUMPS
Pump & motor Pump dimensions Bedplate dimensions TD
Pump 1450 rpm
2900 rpm
In Out a F H1 H2 Bed ref
H0 A L1
L2 B1 B2 B3 d X Lm dB kg
40-315 2.2 65 40 125 470 200 250 5b 100 75 1120 190 360 490 440 22 140 365 58 179 3.0 65 40 125 470 200 250 5b 100 75 1120 190 360 490 440 22 140 365 58 179 4.0 65 40 125 470 200 250 5b 100 75 1120 190 360 490 440 22 140 365 59 183 5.5 65 40 125 470 200 250 5b 100 75 1120 190 360 490 440 22 140 450 67 199 18.5 65 40 125 470 200 250 6b 100 75 1250 205 410 540 490 22 140 594 77 255 22 65 40 125 470 200 250 6b 100 75 1250 205 410 540 490 22 140 594 77 268 30 65 40 125 470 200 250 7b 100 75 1400 230 480 610 550 25 140 784 86 370 37 65 40 125 470 200 250 7b 100 75 1400 230 480 610 550 25 140 784 86 370
50-125 0.55 65 50 100 360 132 160 2a 75 60 800 130 260 360 320 18 100 269 55 70 0.75 65 50 100 360 132 160 2a 75 60 800 130 260 360 320 18 100 269 55 70 1.1 65 50 100 360 132 160 2a 75 60 800 130 260 360 320 18 100 294 57 73 3.0 65 50 100 360 132 160 3a 75 60 900 150 290 390 350 18 100 365 65 86 4.0 65 50 100 360 132 160 3a 75 60 900 150 290 390 350 18 100 365 68 90 5.5 65 50 100 360 132 160 3a 75 60 900 150 290 390 350 18 100 450 74 106 7.5 65 50 100 360 132 160 3a 75 60 900 150 290 390 350 18 100 450 74 106
50-160 0.75 65 50 100 360 160 180 3a 75 60 900 150 290 390 350 18 100 269 55 76 1.1 65 50 100 360 160 180 3a 75 60 900 150 290 390 350 18 100 294 57 79 1.5 65 50 100 360 160 180 3a 75 60 900 150 290 390 350 18 100 294 57 80 5.5 65 50 100 360 160 180 4a 75 60 1000 170 350 450 400 22 100 450 74 115 7.5 65 50 100 360 160 180 4a 75 60 1000 170 350 450 400 22 100 450 74 115 11 65 50 100 360 160 180 5a 100 60 1120 190 360 490 440 22 100 594 77 167
50-200 1.1 65 50 100 360 160 200 3a 75 60 900 150 290 390 350 18 100 294 57 87 1.5 65 50 100 360 160 200 3a 75 60 900 150 290 390 350 18 100 294 57 88 2.2 65 50 100 360 160 200 3a 75 60 900 150 290 390 350 18 100 365 58 98 7.5 65 50 100 360 160 200 4a 75 60 1000 170 350 450 400 22 100 450 74 123 11 65 50 100 360 160 200 5a 100 60 1120 190 360 490 440 22 100 594 77 175 15 65 50 100 360 160 200 5a 100 60 1120 190 360 490 440 22 100 594 77 175 18.5 65 50 100 360 160 200 5a 100 60 1120 190 360 490 440 22 100 594 77 189
50-250 2.2 65 50 100 360 180 225 4b 75 75 1000 170 350 450 400 22 100 365 58 130 3.0 65 50 100 360 180 225 4b 75 75 1000 170 350 450 400 22 100 365 58 130 4.0 65 50 100 360 180 225 4b 75 75 1000 170 350 450 400 22 100 365 59 134 5.5 65 50 100 360 180 225 4b 75 75 1000 170 350 450 400 22 100 450 67 150 15 65 50 100 360 180 225 5b 100 75 1120 190 360 490 440 22 100 594 77 203 18.5 65 50 100 360 180 225 5b 100 75 1120 190 360 490 440 22 100 594 77 217 22 65 50 100 360 180 225 5b 100 75 1120 190 360 490 440 22 100 594 77 230 30 65 50 100 360 180 225 5b 100 75 1120 190 360 490 440 22 100 784 86 332
50-315 4.0 65 50 125 470 225 280 5b 100 75 1120 190 360 490 440 22 140 365 59 185 5.5 65 50 125 470 225 280 5b 100 75 1120 190 360 490 440 22 140 450 67 201 7.5 65 50 125 470 225 280 5b 100 75 1120 190 360 490 440 22 140 450 67 205 11 65 50 125 470 225 280 6b 100 75 1250 205 410 540 490 22 140 594 70 243 30 65 50 125 470 225 280 7b 100 75 1400 230 480 610 550 25 140 784 86 372
75 65 50 125 470 225 280 8d 152 110 1600 270 508 660 600 25 140 1070 87 741
65-125 0.75 80 65 100 360 160 180 3b 75 75 900 150 290 390 350 20 100 269 55 86 1.1 80 65 100 360 160 180 3b 75 75 900 150 290 390 350 20 100 294 57 89 1.5 80 65 100 360 160 180 3b 75 75 900 150 290 390 350 20 100 294 57 90
37 65 50 125 470 225 280 7b 100 75 1400 230 480 610 550 25 140 784 86 372 45 65 50 125 470 225 280 7b 100 75 1400 230 480 610 550 25 140 784 86 296 55 65 50 125 470 225 280 8d 152 110 1600 270 508 660 600 25 140 882 86 681
B2
B1
L1
L2 L2
A
4 HOLES d Ø
a F X Lm
H0
H1
H2
IN
OUTX = 25 for non-spacer coupling
B3
TD pumpset dimensions
Dimensions are for indication only. Certified drawings are avail-able for installation purposes.
APEXPUMPS
82
Pump & motor Pump dimensions Bedplate dimensions TD
Pump 1450 rpm
2900 rpm
In Out a F H1 H2 Bed ref
H0 A L1
L2 B1 B2 B3 d X Lm dB kg
65-125 5.5 80 65 100 360 160 180 4b 75 75 1000 170 350 450 400 22 100 450 74 126 7.5 80 65 100 360 160 180 4b 75 75 1000 170 350 450 400 22 100 450 74 126 11 80 65 100 360 160 180 5b 100 75 1120 190 360 490 440 22 100 594 77 179
65-160 1.1 80 65 100 360 160 200 3b 75 75 900 150 290 390 350 20 100 294 57 95 1.5 80 65 100 360 160 200 3b 75 75 900 150 290 390 350 20 100 294 57 96 2.2 80 65 100 360 160 200 3b 75 75 900 150 290 390 350 20 100 365 58 106 7.5 80 65 100 360 160 200 4b 75 75 1000 170 350 450 400 22 100 450 74 132 11 80 65 100 360 160 200 5b 100 75 1120 190 360 490 440 22 100 594 77 185 15 80 65 100 360 160 200 5b 100 75 1120 190 360 490 440 22 100 594 77 185
65-200 1.5 80 65 100 360 180 225 4b 75 75 1000 170 350 450 400 22 100 294 57 111 2.2 80 65 100 360 180 225 4b 75 75 1000 170 350 450 400 22 100 365 58 121 3.0 80 65 100 360 180 225 4b 75 75 1000 170 350 450 400 22 100 365 58 121 4.0 80 65 100 360 180 225 4b 75 75 1000 170 350 450 400 22 100 365 59 125 15 80 65 100 360 180 225 5b 100 75 1120 190 360 490 440 22 100 594 77 194 18.5 80 65 100 360 180 225 5b 100 75 1120 190 360 490 440 22 100 594 77 208 22 80 65 100 360 180 225 5b 100 75 1120 190 360 490 440 22 100 594 77 221 30 80 65 100 360 180 225 6b 100 75 1250 205 410 540 490 22 100 784 86 321
65-250 3.0 80 65 100 470 200 250 6c 100 90 1250 205 410 540 490 22 140 365 58 189 4.0 80 65 100 470 200 250 6c 100 90 1250 205 410 540 490 22 140 365 59 193 5.5 80 65 100 470 200 250 6c 100 90 1250 205 410 540 490 22 140 450 67 209 7.5 80 65 100 470 200 250 6c 100 90 1250 205 410 540 490 22 140 450 67 213 30 80 65 100 470 200 250 6c 100 90 1250 205 410 540 490 22 140 784 86 364 37 80 65 100 470 200 250 6c 100 90 1250 205 410 540 490 22 140 784 86 364 45 80 65 100 470 200 250 7c 100 90 1400 230 480 610 550 25 140 784 86 395 55 80 65 100 470 200 250 8c 152 90 1600 270 508 660 600 25 140 882 86 588
65-315 7.5 80 65 125 470 225 280 6c 100 90 1250 205 410 540 490 22 140 450 67 231 11 80 65 125 470 225 280 6c 100 90 1250 205 410 540 490 22 140 594 70 262 55 80 65 125 470 225 280 8c 152 90 1600 270 508 660 600 25 140 882 86 606 75 80 65 125 470 225 280 9c 152 90 1800 300 578 730 670 25 140 1070 87 681 90 80 65 125 470 225 280 9c 152 90 1800 300 578 730 670 25 140 923 90 791
80-160 1.5 100 80 125 360 180 225 4b 75 75 1000 170 350 450 400 22 100 294 57 111 2.2 100 80 125 360 180 225 4b 75 75 1000 170 350 450 400 22 100 365 58 121 3.0 100 80 125 360 180 225 4b 75 75 1000 170 350 450 400 22 100 365 58 121 15 100 80 125 360 180 225 5b 100 75 1120 190 360 490 440 22 100 594 77 194 18.5 100 80 125 360 180 225 5b 100 75 1120 190 360 490 440 22 100 594 77 208 22 100 80 125 360 180 225 5b 100 75 1120 190 360 490 440 22 100 594 77 221 30 100 80 125 360 180 225 6b 100 75 1250 205 410 540 490 22 100 784 86 321
80-200 3.0 100 80 125 470 180 250 5b 100 75 1120 190 360 490 440 22 140 365 58 156 4.0 100 80 125 470 180 250 5b 100 75 1120 190 360 490 440 22 140 365 59 160 5.5 100 80 125 470 180 250 5b 100 75 1120 190 360 490 440 22 140 450 67 176 30 100 80 125 470 180 250 7b 100 75 1400 230 480 610 550 25 140 784 86 347 37 100 80 125 470 180 250 7b 100 75 1400 230 480 610 550 25 140 784 86 347 45 100 80 125 470 180 250 7b 100 75 1400 230 480 610 550 25 140 784 86 367
80-250 4.0 100 80 125 470 200 280 6c 100 90 1250 205 410 540 490 22 140 365 59 198
7.5 100 80 125 470 200 280 6c 100 90 1250 205 410 540 490 22 140 450 67 218 11 100 80 125 470 200 280 6c 100 90 1250 205 410 540 490 22 140 594 70 249
5.5 100 80 125 470 200 280 6c 100 90 1250 205 410 540 490 22 140 450 67 214
B2
B1
L1
L2 L2
A
4 HOLES d Ø
a F X Lm
H0
H1
H2
IN
OUTX = 25 for non-spacer coupling
B3
TD pumpset dimensions
Dimensions are for indication only. Certified drawings are avail-able for installation purposes.
83
APEXPUMPS
Pump & motor Pump dimensions Bedplate dimensions TD
Pump 1450 rpm
2900 rpm
In Out a F H1 H2 Bed ref
H0 A L1
L2 B1 B2 B3 d X Lm dB kg
80-250 37 100 80 125 470 200 280 7c 100 90 1400 230 480 610 550 25 140 784 86 380 45 100 80 125 470 200 280 7c 100 90 1400 230 480 610 550 25 140 784 86 400 55 100 80 125 470 200 280 8c 152 90 1600 270 508 660 600 25 140 882 86 593 75 100 80 125 470 200 280 9c 152 90 1800 300 578 730 670 25 140 1070 87 653
80-315 7.5 100 80 125 470 250 315 6c 100 90 1250 205 410 540 490 22 140 450 67 231 11 100 80 125 470 250 315 6c 100 90 1250 205 410 540 490 22 140 594 70 262 15 100 80 125 470 250 315 6c 100 90 1250 205 410 540 490 22 140 594 70 276 18.5 100 80 125 470 250 315 6c 100 90 1250 205 410 540 490 22 140 594 70 289 75 100 80 125 470 250 315 9c 152 90 1800 300 578 730 670 25 140 1070 87 681 90 100 80 125 470 250 315 9c 152 90 1800 300 578 730 670 25 140 1200 90 741 110 100 80 125 470 250 315 9c 152 90 1800 300 578 730 670 25 140 1200 92 841
80-400 15 100 80 125 530 280 355 7c 100 90 1400 230 480 610 550 25 140 594 70 345 18.5 100 80 125 530 280 355 7c 100 90 1400 230 480 610 550 25 140 594 70 358 22 100 80 125 530 280 355 7c 100 90 1400 230 480 610 550 25 140 651 74 396 30 100 80 125 530 280 355 7c 100 90 1400 230 480 610 550 25 140 705 78 407
100-160 3.0 125 100 125 470 200 250 5c 100 90 1120 190 360 490 440 22 140 365 58 166 4.0 125 100 125 470 200 250 5c 100 90 1120 190 360 490 440 22 140 365 59 170 18.5 125 100 125 470 200 250 6c 100 90 1250 205 410 540 490 22 140 594 77 253 22 125 100 125 470 200 250 6c 100 90 1250 205 410 540 490 22 140 594 77 266 30 125 100 125 470 200 250 7c 100 90 1400 230 480 610 550 25 140 784 86 370
100-200 4.0 125 100 125 470 200 280 5c 100 90 1120 190 360 490 440 22 140 365 59 177 5.5 125 100 125 470 200 280 5c 100 90 1120 190 360 490 440 22 140 450 67 193 7.5 125 100 125 470 200 280 5c 100 90 1120 190 360 490 440 22 140 450 67 197 37 125 100 125 470 200 280 7c 100 90 1400 230 480 610 550 25 140 784 86 377 45 125 100 125 470 200 280 7c 100 90 1400 230 480 610 550 25 140 784 86 397 55 125 100 125 470 200 280 8c 152 90 1600 270 508 660 600 25 140 882 86 590 75 125 100 125 470 200 280 8c 152 90 1600 270 508 660 600 25 140 1070 92 650
100-250 7.5 125 100 140 470 225 280 6c 100 90 1250 205 410 540 490 22 140 450 67 237 11 125 100 140 470 225 280 6c 100 90 1250 205 410 540 490 22 140 594 70 268 15 125 100 140 470 225 280 6c 100 90 1250 205 410 540 490 22 140 594 70 282 55 125 100 140 470 225 280 8c 152 90 1600 270 508 660 600 25 140 882 86 612 75 125 100 140 470 225 280 8c 152 90 1600 270 508 660 600 25 140 1070 87 672 90 125 100 140 470 225 280 9c 152 90 1800 300 578 730 670 25 140 1200 90 732 110 125 100 140 470 225 280 9c 152 90 1800 300 578 730 670 25 140 1200 92 832
100-315 11 125 100 140 470 250 315 6c 100 90 1250 205 410 540 490 22 140 594 70 278 15 125 100 140 470 250 315 6c 100 90 1250 205 410 540 490 22 140 594 70 292 18.5 125 100 140 470 250 315 6c 100 90 1250 205 410 540 490 22 140 594 70 305 22 125 100 140 470 250 315 7c 100 90 1400 230 480 610 550 25 140 651 74 354 90 125 100 140 470 250 315 9c 152 90 1800 300 578 730 670 25 140 923 90 757 110 125 100 140 470 250 315 9c 152 90 1800 300 578 730 670 25 140 923 92 857 132 125 100 140 470 250 315 9c 152 90 1800 300 578 730 670 25 140 923 95 857 160 125 100 140 470 250 315 11e 203 140 2000 330 772 950 870 25 140 1036 95 1057
100-400 22 125 100 140 530 280 355 8d 152 110 1600 270 508 660 600 25 140 594 74 401 30 125 100 140 530 280 355 8d 152 110 1600 270 508 660 600 25 140 705 78 412 37 125 100 140 530 280 355 8d 152 110 1600 270 508 660 600 25 140 705 78 475 45 125 100 140 530 280 355 8d 152 110 1600 270 508 660 600 25 140 784 86 495
125-200 7.5 150 125 140 470 250 315 6c 100 90 1250 205 410 540 490 22 140 450 67 225 11 150 125 140 470 250 315 6c 100 90 1250 205 410 540 490 22 140 594 70 256
B2
B1
L1
L2 L2
A
4 HOLES d Ø
a F X Lm
H0
H1
H2
IN
OUTX = 25 for non-spacer coupling
B3
TD pumpset dimensions
Dimensions are for indication only. Certified drawings are avail-able for installation purposes.
Pump & motor Pump dimensions Bedplate dimensions TD Pump 1450
rpm 2900 rpm
In Out a F H1 H2 Bed ref
H0 A L1
L2 B1 B2 B3 d X Lm dB kg
125-200 55 150 125 140 470 250 315 8c 152 90 1600 270 508 660 600 25 140 882 86 600 75 150 125 140 470 250 315 9c 152 90 1800 300 578 730 670 25 140 1070 87 660 90 150 125 140 470 250 315 9c 152 90 1800 300 578 730 670 25 140 923 90 770
125-250 11 150 125 140 470 250 355 6c 100 90 1250 205 410 540 490 22 140 594 70 273 15 150 125 140 470 250 355 6c 100 90 1250 205 410 540 490 22 140 594 70 287 18.5 150 125 140 470 250 355 6c 100 90 1250 205 410 540 490 22 140 594 70 300
125-315 15 150 125 140 530 280 355 8d 152 110 1600 270 508 660 600 25 140 594 70 383 18.5 150 125 140 530 280 355 8d 152 110 1600 270 508 660 600 25 140 594 70 396 22 150 125 140 530 280 355 8d 152 110 1600 270 508 660 600 25 140 651 74 434 30 150 125 140 530 280 355 8d 152 110 1600 270 508 660 600 25 140 705 78 445
125-400 30 150 125 140 530 315 400 8d 152 110 1600 270 508 660 600 25 140 705 78 479 37 150 125 140 530 315 400 8d 152 110 1600 270 508 660 600 25 140 814 78 542 45 150 125 140 530 315 400 8d 152 110 1600 270 508 660 600 25 140 814 78 562 55 150 125 140 530 315 400 8d 152 110 1600 270 508 660 600 25 140 882 79 723
150-200 11 200 150 160 500 280 400 7d 100 110 1400 230 480 610 550 25 140 594 70 295 15 200 150 160 500 280 400 7d 100 110 1400 230 480 610 550 25 140 594 70 309 18.5 200 150 160 500 280 400 7d 100 110 1400 230 480 610 550 25 140 594 70 322
150-250 18.5 200 150 160 530 250 355 7d 100 110 1400 230 480 610 550 25 140 594 70 358 22 200 150 160 530 250 355 7d 100 110 1400 230 480 610 550 25 140 651 74 396 30 200 150 160 530 250 355 8d 152 110 1600 270 508 660 600 25 140 784 78 440
150-315 30 200 150 160 530 280 400 9d 152 110 1800 300 578 730 670 25 140 784 78 483 37 200 150 160 530 280 400 9d 152 110 1800 300 578 730 670 25 140 814 78 546 45 200 150 160 530 280 400 9d 152 110 1800 300 578 730 670 25 140 814 78 566 55 200 150 160 530 280 400 9d 152 110 1800 300 578 730 670 25 140 882 79 727
150-400 37 200 150 160 530 315 450 9d 152 110 1800 300 578 730 670 25 140 814 78 571 45 200 150 160 530 315 450 9d 152 110 1800 300 578 730 670 25 140 814 78 591 55 200 150 160 530 315 450 9d 152 110 1800 300 578 730 670 25 140 882 79 752 75 200 150 160 530 315 450 9d 152 110 1800 300 578 730 670 25 140 1070 87 792
200-250 37 250 200 180 553 315 450 9d 152 110 1800 300 578 730 670 25 180 814 78 601 45 250 200 180 553 315 450 9d 152 110 1800 300 578 730 670 25 180 814 78 621 55 250 200 180 553 315 450 9d 152 110 1800 300 578 730 670 25 180 923 81 782
200-315 45 250 200 180 670 315 480 10e 152 140 1900 315 698 850 780 28 180 814 78 736 55 250 200 180 670 315 480 10e 152 140 1900 315 698 850 780 28 180 923 81 897 75 250 200 180 670 315 480 10e 152 140 1900 315 698 850 780 28 180 1036 82 1122
200-400 75 250 200 180 670 335 480 10e 152 140 1900 315 698 850 780 28 180 1036 82 1166 90 250 200 180 670 335 480 10e 152 140 1900 315 698 850 780 28 180 1036 82 1276 110 250 200 180 670 335 480 11e 203 140 2000 330 772 950 870 28 180 1156 84 1342 132 250 200 180 670 335 480 11e 203 140 2000 330 772 950 870 28 180 1156 84 1522
250-315 45 300 250 220 691 355 520 10e 152 140 1900 315 698 850 780 28 180 814 78 796 55 300 250 220 691 355 520 10e 152 140 1900 315 698 850 780 28 180 923 81 957 75 300 250 220 691 355 520 10e 152 140 1900 315 698 850 780 28 180 1036 82 1182
250-400 110 300 250 220 682 400 560 11e 203 140 2000 330 772 950 870 28 180 1156 84 1437 132 300 250 220 682 400 560 11e 203 140 2000 330 772 950 870 28 180 1156 84 1617 160 300 250 220 682 400 560 11e 203 140 2000 330 772 950 870 28 180 1156 84 1622
84
APEXPUMPS
B2
B1
L1
L2 L2
A
4 HOLES d Ø
a F X Lm
H0
H1
H2
IN
OUTX = 25 for non-spacer coupling
B3
TD pumpset dimensions
Dimensions are for indication only. Certified drawings are avail-able for installation purposes.