tds abs fp en - polyalkemi.no · smartbag, security seal, desiccant bag m 750 g 975 g 1.75 mm/2.85...
TRANSCRIPT
![Page 1: TDS ABS FP EN - polyalkemi.no · SmartBag, security seal, desiccant bag M 750 g 975 g 1.75 mm/2.85 mm Natural PRINTING PROPERTIES PHYSICAL PROPERTIES Chemical Name Acrylonitrile Butadiene](https://reader033.vdocuments.net/reader033/viewer/2022060516/604081cdbab63d72ef34dceb/html5/thumbnails/1.jpg)
ABS F.P.
Fireproof ABS tested according to UL94 standard, choosing the V-1 for 1,5mm wall thickness and V-0 for thickness above 2.1mm, ideal for protecting systems with high risk of fire.
GROSS W.SIZE NET W. DIAMETERS COLOR PACKAGING
SmartBag, security seal,desiccant bag
Natural1.75 mm/2.85 mm975 gM 750 g
PRINTING PROPERTIES
PHYSICAL PROPERTIES
Acrylonitrile Butadiene StyreneChemical Name
56 MPaFlexural Strength
1.17 g/cm3Material Density
24 kJ/m2Charpy Notched Impact Strength at 23°C
180 MPaFlexural Modulus
38 MPaTensile Yield Strength at 23°C ISO 178
ASTM D792
ISO 179ISO 178
ISO 527
°C 210-230Print Temperature°C80-100Hot Pad%OFFFan Layer
���������������������������������������
MECHANICAL PROPERTIES
THERMAL PROPERTIES
93 °C Vicat Softering Temperature 76 °C Heat Distortion Temperature
ISO 306ISO 75
23 kJ/m2Notched Izod Impact ISO 180
![Page 2: TDS ABS FP EN - polyalkemi.no · SmartBag, security seal, desiccant bag M 750 g 975 g 1.75 mm/2.85 mm Natural PRINTING PROPERTIES PHYSICAL PROPERTIES Chemical Name Acrylonitrile Butadiene](https://reader033.vdocuments.net/reader033/viewer/2022060516/604081cdbab63d72ef34dceb/html5/thumbnails/2.jpg)
DISCLAIMER: The information provided in the data sheets is intended to be just a reference. It should not be used as design or quality control values. Actual values may differ significantly depending on the printing conditions. The final performance of the printed components does not only depend on the materials, also the design and printing conditions are important.Smart Materials assumes no responsibility for any damage, injury or loss produced by the use of its filaments in any particular application.
To achieve a good adhesion between layers and maintain good properties it is necessary to use a completely closed printer that reaches the recommended temperature. Please make sure that your device meets these features.
USE A SUITABLE DEVICE FOR PRINTING
����������������������������������������
������������������