tec air 2 air suspension inst.- manual air 2 air suspension.… · check the airbag rubber for...
TRANSCRIPT
YORK TRANSPORT EQUIPMENT ASIA PTE LTD 15
1. Measure from Kingpin to end of front axle
2. Adjust the adjustable torque arm until:
A= B +/- 2mm
3. Measure the distance between the end of the front and
second axle (both side)
4. Adjust the adjustable torque arm until:
C=D +/- 1mm
5. Repeat step 3 & 4 for second & third axle until
E= F +/- 1mm
6. Tighten the clamp bolts alternately (min 4
times) With torque wrench until torque of
90/100 Nm is reached
AXLE ALIGNMENT PROCEDURE
YORK TRANSPORT EQUIPMENT ASIA PTE LTD 16
A= B +/- 2mm
C= D +/- 1mm
E= F +/- 1mm
AXLE ALIGNMENT PROCEDURE