tech n computing
TRANSCRIPT
Introduction to NComputing
Siam Network & Computer Co., Ltd.
Dell Corporation (Thailand) Co., Ltd.
Agenda NComputing & SNC Company background What is “Multi User Computing”?Product Overview
L SeriesX SeriesManagement Software
Basic Setting L-Series & NCT-2000 XP Console Basic Setting X-Series & NCX-2000 XP Console Advance Setting X&L-Series Setting NControl FAQ Q&A
Agenda
NComputing Background Our Vision:
Our Solution:Enables a single PC to be used by multiple users at once: It is simple to create, low cost, easy to maintain, eco
friendly and will dramatically lower computing costs
Expand Access & Dramatically Lower Computing Costs
Through Multi-User Computing
Our Success:We are the fastest growing “Multi-User Computing” company in the world with over three hundred thousand units deployed in over 80 countries
SNC Background
Siam Network and Computer founded in 1999 with professional team for network implement in corporate and
government
2004 SNC was a partnership with Ncomputing to
distribute terminal unit computing in NComputing brand
SNC Best Performance
Award 2005 from NComputing
What is “Multi User Computing”?
NComputing is a terminal unit that does not require CPU , hard-drive, or CD-Rom. With the exclusive UTMA (Ultra Thin Multi-Access) technology, User have the abilit
y to expand PC up to 1 0 computer terminals costs less t han a t r adi t i onal PC.
The IdeaShare excess computing resource and redistribute
Capacity of the average CPU is under-utilized (using less than 10%!)
< CPU meter >
Turn 1 PC to 30 Virtual PCs
NComputing SolutionAll-inclusive Multi-User Computing technology
NComputingTerminal Server S/W onHost Computer
• Proprietary Terminal Service Software• Runs on ordinary PC• Supports any Operating System Including Windows XP, Linux OS not only Server OS.
Desktop Streaming Protocol
• NComputing’s UXP (User eXtension Protocol)• Secure and faster than RDP• Optimized for fast screen refresh• Flexible to customize
NComputing uniqueSoC basedAccess Terminal
• Lowest cost and slim• Faster and silent• Easy to expand, install• Less Power (< 5W)• Various form factors• No embedded OS • Smart Boot loader built-in
Product OverviewX-Series: Up to 7 users can share one PC Direct connection via UTP cable (10 m / 33
ft) X300 kit includes:
1 PCI card with 3 ports 3 access terminals Terminal services software
Ethernet-Based
L-Series: Up to 30 users can share one PC Ethernet connection over any distance Each L Series access terminal includes:
1 access terminal Terminal services software
Management Software: NControl: monitor/remote control 128
sessions
PCI-based
NComputing X Series Most popular solution for schools Just less than ฿4,000 per seat to add users
to PC Hardwired connection up to 33 feet
Up to 3 users per PCI card Max of 7 users per PC
Terminal services software on host PC enables simultaneous sharing and management of student sessions
Access terminal connections: VGA (up to 1024x768 resolution) Keyboard Mouse Speaker output No separate power input required
(supplied by PC through CAT 5 cable) USB ports on host PC can be assigned to
individual users
Note: Four users can share a PC running with one X300 kit. Seven users can share with two X300 kits.
NComputing X Series
Flexible Ethernet connection enables any distance between host PC and users
Terminal services software on host PC enables simultaneous sharing and management of sessions Up to 10 users on desktop OS Up to 30 users on server OS
(Windows 2003 Server or Linux) Access terminal connections:
VGA (up to 1440x900 resolution) MIC Port (L230 only) USB Flash Drive Port (L230 only) PS/2 keyboard PS/2 mouse Speaker output DC Power input (~5 Watts)
NComputing L Series
Setting L Series
“Full” Windows XP or Linux Desktop user experience Up to 10 users can share a PC running a desktop OS and up 30
users can share if the host hardware is running Windows 2003 Server or Linux
Cost INCLUDING terminal services software Deploy within 1 hour. Can use existing imaging tools, policies,
etc. Integrates within existing PC management process Stateless Design: No data at desktop, no embedded OS High Security – Flash memory ports are optional and can be
turned off
NComputing L Series
L130 L230
New Model
VGA RJ-45 Power On/Off Speaker USB Memory*
Microphone*
PS/2 Keyboardand Mouse
(Common to both the L130 & L230)(*L230 Only)
L130 L230
USB port No Yes^
Microphone No Yes
Widescreen 1440 x 900* 1440 x 900
Color Support 16-bit 24-bit
VESA mount Yes Yes
OS Support Win/Linux Win/Linux
Notes: 1. *16-bit Only in the L130 (24-bit in the L230)2. ^ NComputing Linux terminal services currently does not support USB3. LTS 2.0 Linux support for SUSE 10.2, Fedora 6 and Ubuntu 7.04 for the L130/L230 only4. Additional software licenses may be required by the software licensors. Please check your software user license agreements to ensure your
continued compliance with such agreements.
NComputing L Series
NControl Enables Remote Control and Administration
Control Mode Remotely monitor and control the
keyboard, mouse and screen of any student to collaborate
Block a student from access to ensure attention (screen is blanked and keyboard/mouse are disabled)
Remote logoff, restart, or shutdown Remote updates and installation of software Students can be in multiple locations/tele-learning
Presentation Mode Broadcast the teacher’s screen activities to one or
more students Broadcast one student’s screen to a group of
students
FTP Mode Distribute to and collect files from student computers
Step 1: Install PCI card into the Host PC
Step 2: Connect access terminal to the employee’s monitor and peripherals
Step 3: Connect access terminal to the PCI card via standard cable
Step 4: Install NComputing software on Host PC directly or via imaging software (like Ghost)
Setting X Series
Device Manager X300 0n Windows
NCX-Console
Show session log on this host
NCX-Console
Click
Insert message
NCX-Console
Click
Click “Yes” want stop session
Click ”No” want cancel stop session
NCX-Console
NCX-Console
NCX-Console
NCX-Console
Insert delay time when shutdown (seconds)
NCX-Console
Select allow or not every session can shutdown
NCX-Console
Select resolution on x300 box
L Series Installs in Just 3 Easy Steps
Step 2: Connect terminal to the network
Step 1: Connect L Series access terminal to the employee monitor/mouse/keyboard
Step 3: Install NComputing software on Host PC directly or via imaging software (like Ghost)
Recommended Host Configuration
Setting L-Series Box
select whether to use a dynamic IP address or a static IP address.
Autodetection : No specified server network address.
TS 2,TS 3:field where you set a host PC IP address.
User name : insert user for Windows log inPrograms :You can make the desktop come up, or a program that is specified Desktop size: You can set the resolution, color depth, and frequency.
Setting L-Series Box
"Password" : protecting the access terminal options with a password.
Setting L-Series Box
Using the management console
Show user log on
Click right bottom on mouse
Using the management console
Select for view screen or control client
Using the management console
Click
Using the management console
Version of NCT-2000-XP
Using the management console
Using the management console
Using the management console
Insert delay time when shutdown (seconds)
Using the management console
Clear session auto when disconnect (minutes)
Using the management console
Disable for select master or client use USB on Host-PC
Select client
Using the management console
Setting Hardware
Select client
Click for setting client
Edit MAC Address
Using the management console
Using the management console
Insert data of user
Enable for auto logon
Using the management console
Using the management console
Observed PCs/ Workplaces
List of not observed just active PCs/Workplace
Main window containing all other windows
Ncontrol Groups
List of help messages and finally
Master Console
NControl : Create Group
Insert group name
Select group
Add client to group
NControl : Add Client to Group
NControl : Show client in Group
NControl :Action on client
NControl : Control all client
Thank You