TechLine1ASYNCHRONOUS MOTORS

We put ideas into gear.ABM Greiffenberger Antriebstechnik

1. Overview 3

2. Three-Phase AC Motors 4

Rating Chart by model size and number of poles

3. Two-Speed Motors 5

Rating Chart by model size and number of poles

4. Single-Phase Motors 6

4.1 Rating Chart Type EK

4.2 Rating Chart Type ERKK

5. Brakes 7

6. Dimension Tables 8 - 10

7. Electrical Characteristics 11

8. Mechanical Characteristics 12 - 13

9. Options 14 - 15

Contents

TechLine 1Asynchronous Motors

Edition 07/20072

The ABM program of asynchronous motors comprisesthe full range of model sizes from 56 - 160, each avai-lable in different standard lengths. ABM motors suc-cessfully incorporate numerous developments, such asapplication specific motor windings and extruded alumi-num motor housings for compact dimensions to namejust two, essential to achieve maximum flexibility inmanufacturing of tailor-made motors.

ABM asynchronous motors are available as IEC standard motors, low-energy motors, built-on motorsfor gearboxes and transmissions, rotary field magnets,special-purpose motors and low voltage AC motors(specifically for use in battery-powered vehicles).

This brochure has been designed to provide an over-view of our capabilities rather than being a plain listingof the various products available.

ABM Three-Phase AC Motors (D) Model size 56 - 160 Rated power from 0.06 to 30 kW High efficiency 2 - 12 pole versions Pole-changing up to 12/2 pole Types according to IEC and customer specific Enclosure class up to IP66 Special voltages 7 V to 690 V Speeds up to 10.000 r.p.m. Temperature class FABM Single-Phase Motors (EK, ERKK) Model size 56 - 90 Rated power from 0.06 to 3 kW 2 and 4 pole versions Starting capacitor and starting relay for

high starting torques (ERKK)

Minimal running noise Types according to IEC and customer specificABM Special Motors Brake motors Low-energy motors (EFF1) Low voltage AC motors Rotary field magnets (DG) Vibration motors (RD) Motors with integral flywheel (KD) Motors with Steinmetz connection (DEK) Vacuum-cast pot motors IP66 Generators Inverter motors Custom models in diecast aluminium

3

1. Overview

2. Three-Phase AC Motors

4

4

Rating Chart

All details are for S1 operation, 400 V, 50 Hz.

Bold type indicates IEC standard sizes.

Electrical details for duty cycles and ambient conditions not listed are available upon request or refer to

sections 7 and 8 (Electrical and Mechanical Characteristics).

Today, single-speed three-phase AC motors have grown in importance to become

the industrial drive. Their complete freedom from maintenance, high efficiency and

very favourable price/performance ratio are just three of their outstanding features. They are versatile in

use and are the standard solution for variable-speed drives, especially when used with frequency inverters.

D56a 0.09 2780 0.29 57 0.06 1380 0.29 50 - - - - - - - -D56b 0.18 2770 0.52 66 0.12 1350 0.52 60 - - - - - - - -D56c 0.25 2770 0.72 66 0.18 1300 0.62 61 0.06 860 0.33 45 - - - -D63a 0.18 2770 0.48 68 0.12 1360 0.43 58 - - - - - - - -D63b 0.37 2750 0.95 70 0.25 1300 0.80 68 0.09 850 0.50 50 0.06 630 0.40 42D63c 0.55 2740 1.40 70 0.37 1300 1.10 66 - - - - - - - -D71a 0.37 2800 0.95 74 0.25 1360 0.72 68 0.12 850 0.52 50 0.09 650 0.50 47D71b 0.55 2830 1.33 77 0.37 1370 1.05 70 0.18 880 0.87 56 0.12 670 0.80 40D71c 0.75 2800 1.70 74 0.55 1330 1.45 70 - - - - - - - -D80a 0.75 2770 1.80 74 0.55 1340 1.50 68 0.37 870 1.25 59 0.18 660 0.86 51D80b 1.1 2760 2.60 75 0.75 1360 2.00 72 - - - - - - - -D80c - - - - - - - - 0.55 860 1.70 61 0.25 660 1.10 55D80e 1.5 2810 3.35 79 1.1 1370 2.90 75 0.75 880 2.40 63 0.37 660 1.40 57D90Sa 1.5 2810 3.30 78 1.1 1370 2.70 75 0.75 895 2.20 68 0.37 670 1.35 60D90Sb 2.2 2800 4.80 80 1.5 1390 3.60 78 1.1 890 3.10 67 0.55 670 1.90 64D90La 2.2 2800 4.80 80 1.5 1390 3.60 78 1.1 890 3.10 67 0.55 670 1.90 64D90Lb 3 2810 6.50 82 2.2 1370 5.20 78 1.3 900 3.70 68 0.75 670 2.70 64D100La 3 2860 6.60 82 2.2 1410 5.10 79 1.5 910 4.00 77 1.1 670 3.80 69D100Lb 4 2880 8.40 86 3 1410 6.60 84 - - - - - - - -D100Lc 5.5 2860 11.5 87 4 1410 8.40 83 2.2 920 5.40 78 1.5 680 4.70 71D112Mb 5.5 2890 11.0 84 5.5 1430 11.0 86 - - - - - - - -D112M 7.5 2880 14.5 85 7.5 1430 16.0 85 - - - - - - - -D112Me 9.5 2890 18.5 87 - - - - - - - - - - - -D132Mc 11 2920 22.0 89 - - - - - - - - - - - -D132Mb - - - - 7.5 1450 16.2 86 - - - - - - - -D132Mc - - - - 11 1445 24.0 87 - - - - - - - -D132Md 15 2900 29.0 89 - - - - - - - - - - - -D132L - - - - 15 1460 32.0 87 - - - - - - - -D160MR 15 2920 28.0 88 11 1450 22.5 88 7.5 970 16.5 85 5.5 715 13.0 84D160LR 18.5 2930 34.0 89 15 1460 28.5 88 11 965 23.0 85 7.5 720 17.0 86D160LbR - - - - 18.5 1460 37.0 88 - - - - - - - -

P[kW]

Motor Type(model size)

I[A] [%]

P[kW]

I[A] [%]

P[kW]

n[r.p.m.]

n[r.p.m.]

n[r.p.m.]

n[r.p.m.]

I[A] [%]

P[kW]

I[A] [%]

2 pole/3000 r.p.m. 4 pole/1500 r.p.m. 6 pole/1000 r.p.m. 8 pole/750 r.p.m.

1500/3000 4/2 1 6 D/SS 750/1500 8/4 1 6 D/SS750/3000 8/2 2 6 S/S 500/3000 12/2 2 6 S/S

5

All details are for S1 operation, 400 V, 50 Hz.

Exception: The 12/2 pole motors are designed for S3 operation - 15/25%, typically used for hoist motors.

Model sizes and specifications for other pole numbers upon request.

2. Drehstrommotoren3. Two-Speed Motors

Two-speed motors are used when different speeds are required.

These depend on the motor's number of poles. The table shows the speeds in which

these motors are available. Other speed ratios or multiple speeds are also possible.

The listed versions of our two-speed motors are designed for direct starting.

Typical Applications: Hoisting and traversing gear Kitchen appliances Conveyor belts Circular saws Power drills General 2-speed drive applications

Number of poles

Number of windings

Number of terminals

Graphic symbol

Speed steps inr.p.m.

Rating Chart

D56b 0.06/0.09 0.29/0.29 - - - - - -D63a 0.09/0.12 0.40/0.38 - - - - - -D63b 0.12/0.18 0.48/0.51 - - - - - -D71a 0.18/0.25 0.60/0.75 - - 0.04/0.18 0.34/0.70 - -D71b 0.25/0.37 0.81/1.05 - - 0.06/0.25 0.43/0.80 - -D71c 0.37/0.55 0.76/0.88 - - 0.09/0.37 0.81/1.15 - -D80a 0.45/0.60 1.15/1.4 0.18/0.25 0.95/0.71 - - - -D80b 0.6/0.8 1.55/1.9 - - 0.12/0.55 0.67/1.52 - -D80c - - 0.25/0.37 1.15/0.95 - - - -D80e 0.75/1.1 2.2/2.9 - - 0.18/0.75 0.95/2.0 - -D90Sa 0.75/1.1 1.9/2.65 - - 0.18/0.75 1.05/1.8 - -D90Sb 1.1/1.5 2.7/3.5 0.37/0.55 1.8/1.45 0.25/1.1 1.25/2.6 - -D90Lb 1.5/2.2 3.6/4.8 0.55/0.75 2.2/1.8 0.37/1.5 1.7/3.5 - -D100La 2.0/2.5 4.6/5.5 0.9/1.5 3.1/3.5 - - - -D100Lb 2.6/3.2 5.7/6.7 - - 0.55/2.2 2.2/4.8 0.4/2.5 2.6/5.9D100Lc 3.3/4.1 6.9/8.1 1.4/2.2 4.3/5.0 0.75/3.0 2.9/6.3 0.45/3.2 2.7/7.2D112Mb 4.4/5.3 9.2/11.0 1.9/3.0 5.2/7.0 1.1/4.0 3.8/9.0 0.7/4.9 5.5/12D132Mb 6.2/7.5 14/17 - - 1.5/5.5 5.5/12.5 0.9/6.0 5.5/14D132Md 8/11 18/22 - - 2.2/7.5 7.4/16 1.5/9.5 9/22D160MR 8/11 15.5/22 6/8 13.5/16 2.2/7.5 7.1/16 - -D160LR 11/15 21/29 7.5/11 17.5/23 3/11 9.5/22 2.6/16 15/33

8/4 pole750/1500 r.p.m.

Dahlander circuit D/SS

4/2 pole1500/3000 r.p.m.Dahlander circuit D/SS

P[kW]

Motor type(model size)

I[A]

P[kW]

I[A]

P[kW]

P[kW]

I[A]

I[A]

12/2 pole500/3000 r.p.m.

2 separate windings S/S

8/2 pole750/3000 r.p.m.

2 separate windings S/S

4. Single-Phase Motors

6

4.1 TYPE EKSingle-phase motors with running capacitor. This type has a locked-rotor torque from 40 to 70%

depending on the size of the motor. The starting current is around 3 to 4.5 times the rated current:

These motors are ideal for machines that start easily.

Typical Applications Blowers Pumps Compressors

4.2 TYPE ERKKSingle-phase motors with running capacitor, auxiliary winding, starting capacitor and current-dependent

starting relay offer particularly favourable performance for heavy starting. The locked-rotor torque is approx.

200%. The starting current is approx. 3 to 4.5 times the rated current.

Application Examples Screw conveyors Metering systems Agitators

Rating Chart

Rating Chart

Other versions, e.g. Type ERK (single-phase motor with auxiliary winding, integral starting relay and

starting capacitor) upon request.

All details are for S1 operation,230 V, 50 Hz. Electrical details for duty cycles and ambient conditions not listed are availableupon request or refer to sections7 and 8 (Electrical andMechanical Characteristics).

All details are for S1 operation,230 V, 50 Hz. Electrical details for duty cycles and ambient conditions not listed are availableupon request or refer to sections7 and 8 (Electrical andMechanical Characteristics).

ERKK71b 0.37 2.4 12+25 0.25 1.8 12+20ERKK71c 0.55 3.6 16+40 0.37 2.65 16+25ERKK80b 0.75 5.0 25+80 0.55 3.9 20+50ERKK80e 1.1 7.0 30+100 0.75 5.2 25+80ERKK90Sb 1.5 9.5 40+120 1.1 7.4 40+100ERKK90 Lb 2.2 12.9 50+160 1.5 9.6 50+120

Motor Type(model size)

P[kW]

I[A]

CB + CA[F]

P[kW]

I[A]

CB + CA[F]

4 pole/1500 r.p.m.Type ERKK with running capacitor,starting capacitor and starting relay

2 pole/3000 r.p.m.Type ERKK with running capacitor,starting capacitor and starting relay

P[kW]

I[A]

CB[F]

P[kW]

I[A]

CB[F]

2 pole/3000 r.p.m.Type EK with running capacitor

4 pole/1500 r.p.m.Type EK with running capacitor

EK56a 0.09 0.72 3 0.06 0.62 4EK56b 0.12 1.0 5 0.09 0.85 5EK63a 0.18 1.5 5 0.12 1.05 6EK63b 0.25 1.7 10 0.18 1.45 8EK71b 0.37 2.4 12 0.25 1.8 12EK71c 0.55 3.6 1