technical catalogue hmi - siemens plc training online · technical catalogue mitsubishi electric...

76
HMI Human Machine Interface GOT, MAC Technical Catalogue MITSUBISHI ELECTRIC 2004

Upload: others

Post on 30-Oct-2019

55 views

Category:

Documents


1 download

TRANSCRIPT

Page 1: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

HMIHuman MachineInterface

GOT,MAC

Technical Catalogue

MITSUBISHI ELECTRIC

2004

Page 2: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

2 MITSUBISHI ELECTRICHMI

Additional ServicesYou will find current information on updates, alterations, new items, and technical support on MITSUBISHI ELECTRIC's web pages(www.mitsubishi-automation.com).

The products section of the MITSUBISHI home site includes various documentations of the whole product range by MITSUBISHI ELECTRIC as wellas the current version of this catalogue on hand. All manuals and catalogues can be downloaded. The content is updated daily and to date is pro-vided in German and English.

About this product catalogueDue to the constantly growing product range, technical alteration, and new or changed characteristical features, this catalogue is updatedfrequently.

Texts, figures and diagrams shown in this product catalogue are intended exclusively for explanation and assistance in planning and ordering theoperator terminals of the HMI series and the associated accessories. Only the manuals supplied with the units are relevant for installation, commis-sioning and handling of the units and the accessories. The information given in these documentations must be read before installation and commis-sioning of the units or software.

Should questions arise with regard to the planning of modules described in this product catalogue, do not hesitate to contact the german branchof the MITSUBISHI ELECTRIC EUROPE B.V. in Ratingen or one of its distributors (see cover page).

© MITSUBISHI ELECTRIC EUROPE B.V. 04/2004 (10th edition)

New Products

04/2004

Further Publications within the PLC Range

Technical catalogues System Q, AnU/QnA, AnS/QnAS, FX familyProduct catalogues for programmable logic controllers andaccessories for the MELSEC series

Technical catalogue NetworksProduct catalogue for Master and Slave modules as well asaccessories for the use of programmable logic controllers inopen networks and MELSEC networks

Technical

Catalogues

New Items in this Catalogue

Software

MX4 SCADA’s exceptional flexibility maximizes your productivity byallowing optimal system architecture in the way that best suits yougiving you access to powerful, dynamic features for both centralisedand distributed processing.

Page 3: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

3MITSUBISHI ELECTRIC HMI

HMI

INTRODUCTION AND CONFIGURATION Introduction of the HMI control units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

HMI and networks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

GOT SERIES CONTROL TERMINALS System description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Text display units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Panel description and specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Communications modules und adapters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

MAC E SERIES OPERATOR TERMINALS System description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Panel description and specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Industrial PC’s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

ACCESSORIES Backlights, protective film sheets, keyboard extension. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

PROFIBUS/DP adapters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Profibus connector, interface boards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Storage media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Interface converter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

DIMENSIONS GOT series control units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

MAC E series control units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Industrial PC’s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

PROGRAMMING

SOFTWARE Visualisation software for GOT and FX-DU control units. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Programming software for GOT series control units GT-Works . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Programming software for MAC E series control units E-Designer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Programming software for MAC E series control units E-View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Software-based HMI solution GT SoftGOT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Process visualisation software MX4 SCADA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

APPENDIX

Order form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

CONTENTS

BASI

CS

Page 4: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

4 MITSUBISHI ELECTRICHMI

HMI Control Units for Human-Machine Communication

The interface between human andtechnology

Users of today’s factory automation sys-tems want more and clearer informationon the control systems of their plant andmachinery. HMI control terminals and pro-cess visualisation software enable an infor-mative dialogue between operator andmachine, making them the ideal comple-ment to the MELSEC PLC systems.

HMI control units make factory systemfunctions transparent, enabling the opera-tor to monitor and edit process dataquickly and easily.

You can choose between HMI control unitswith text and graphical displays. Fully pro-grammable function keys and displaysmake the units even more user-friendly.The units can be programmed andconfigured with a PC running the intuitiveWindows-based programming softwarepackage.

HMI units can be installed directly on yourmachines and require nearly no additionalmodules for connection to the PLC. Theyprovide direct access to all information andprocess data, with text or graphical displays.

An IP65 rating (and higher) ensures thatthe HMIs will always perform reliably, evenunder the toughest conditions.

Specifications A985GOT A975GOT A970GOTA950GOTA953GOT

F940WGOT F940GOTF940/943GOTHandy-GOT

F930GOT F930GOT F920GOT

Display unit TFT, 256-col. TFT, 256-col. SBA: STN, 8-col.LBA: EL, 2-col.

SBD: STN,8-col.LBD: STN,mono

TFT, 256-col.STN,8-col./monobacklit

STN,8-col./monobacklit

STN, 2-col. STN, 2-col.backlit

STN,2-col./white/redbacklit

Display format (W x H) /character height

mm 246 x 184.5 211 x 158 211 x 158 115 x 86 155.5 x 87.8 115 x 86 115 x 86 117 x 42 117 x 42 60 x 30

Resolution; characters x lines(pixles)

200 x 75(800 x 600)

160 x 60(640 x 480)

160 x 60(640 x 480)

40 x 15(320 x 240)

60 x 14 (horiz.)29 x 30 (vert.)

40 x 15(320 x 240)

40 x 15(320 x 240)

15 x 5(240 x 80)

30 x 5(240 x 80)

16 x 4(128 x 64)

Applicable PLC All MELSEC PLC systems

Applicable third party manufact. All major PLC manufacturers —

Printer interface Integrated Integrated Integrated RS232C RS232C RS232C RS232C RS232C RS232C RS232C

Memory type Flash-RAM Flash-RAM Flash-RAM Flash-RAM Flash-RAM Flash-RAM Flash-RAM Flash-RAM Flash-ROM Flash-ROM

External I/O connectors 8 8 8 2 3 2 2 2 2 2

Real-time clock Via PLC Via PLC Via PLC Via PLC Integrated Integrated Integrated Integrated Integrated Integrated

Keyboard Touch-panel Touch-panel Touch-panel Touch-panel Touch-panel Touch-panel Touch-panel Touch-panel Membrane/Touch-panel Membrane

Function keys Up to 1900touch-keys

Up to 1200touch-keys

Up to 1200touch-keys

Up to 3000touch-keys

Max. 50 touch-keys/screen

Max. 50 touch-keys/screen

Max. 50 touch-keys/screen

Max. 50 touch-keys/screen

8/max. 50 touch-keys/screen 6

LED indicators 1 (POWER) 1 (POWER) 1 (POWER) 1 (POWER) 1 (POWER) 1 (POWER) 6 — 8 (green) —

Weight 2.35 kg 1.7 kg 1.78 kg 1.0 kg 0.79 kg 1.0 kg 0.79 kg 0.3 kg 0.6 kg 0.3 kg

Features

Simple installation and user-friendlyoperation

Broad range of applications Clear text and graphics process displays

Report generation for quality controland process data exchange

Precise, informative messages andinstructions in error situations

INTRODUCTION AND CONFIGURATIONBA

SICS

MECA

GRAPHIC OPERATION TERMINAL

MITSUBISHI

POWEREXT

1F1

NUM 68 97

2F2

0- .

3F3

4F4

5POWER

Page 5: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

5MITSUBISHI ELECTRIC HMI

FX-10DU-E FX-10DM-E MAC E50 MAC E100 MAC E150 MAC E200 MAC E300 MAC E600MAC E610/MAC E615

MAC E700 MAC E710 MAC E900T MAC E900VT MAC E910T

LCD LCDLCD,mono,backlit

LCD,momo,backlit

LCD, mono,backlit LCD LCD, mono,

backlitLCD, mono,backlit

LCD,16 graysc./256 colours,backlit

LCD,256 colours,backlit

LCD,256 colours,backlit

TFT/256 colours,backlit

TFT/256 colours,backlit

TFT/256 colours,backlit

8 8 5 5 5 5 132 x 38 132 x 38 115 x 86 120 x 90 120 x 90 214 x 161 214 x 161 214 x 161

16 x 2 16 x 2 16 x 2 20 x 2 20 x 2 20 x 4 20 x 4 / 40 x 8(240 x 64)

20 x 8 / 40 x 16(240 x 128) 320 x 240 40 x 30

(320 x 240)40 x 30(320 x 240)

80 x 60(640 x 480)

80 x 60(640 x 480)

80 x 60(640 x 480)

FX family FX family All MELSEC PLC systems (MAC E50: only MELSEC FX, AnS, AnU)

— — All major PLC manufacturers

— — — RS232C,RS422 — RS232C,

RS422RS232C,RS422

RS232C,RS422

RS232C,RS422

RS232C,RS422

RS232C,RS422

RS232C,RS422

RS232C,RS422

RS232C,RS422

EEPROM EEPROM Flash-RAM Flash-RAM Flash-RAM Flash-RAM Flash-RAM Flash-RAM Flash-RAM Flash-RAM Flash-RAM Flash-RAM Flash-RAM Flash-RAM

— — 2 2 2 2 2 2 2 2 2 2 2 2

Via PLC Via PLC — Integrated Integrated Integrated Integrated Integrated Integrated Integrated Integrated Integrated Integrated Integrated

Membrane Membrane Membrane Membrane Membrane Membrane Membrane Membrane Touch-panel Membrane Touch-panel Membrane Membrane Touch-panel

— — 4 soft keys 4 4 soft keys 5 8/max. 128(opt.)

16/max. 128(opt.)

touch-keys/max. 128 (opt.)

16/max. 128(opt.)

8/touch-keys/max. 128 (opt.)

22 /max. 128(opt.)

22 + 28 /max. 128 (opt.)

touch-keys /max. 128 (opt.)

— — — — — 5 (2-col.) 16 (2-col.) 16 (2-col.) 1 (POWER) 14 (2-col.) 8 (2-col.) 20 (2-col.) 20 + 28 (1-col.) —

0.2 kg 0.15 kg 0.2 kg 0.25 kg 0.5 kg 0.7 kg 1.5 kg 1.6 kg 1.7 kg 1.7 kg 1.7 kg 3.5 kg 3.5 kg 3.5 kg

PLC, HMI and different Networks in Cooperation

HMI and networks

Network support, communication betweendevices and data exchange are all standardfeatures in today’s factory automation sys-tems. The HMI control units and processvisualisation software provide full supportfor the commonest standard networks.

The control units are normally connectedto the PLC’s RS422 port, which provides a1:1 link. In MELSECNET the control unitscan be configured as slaves. If you require astandard open network you can choosebetween PROFIBUS/DP, CC-Link and Ether-net TCP/IP.

A unique option is the 1:n link providedby MAC-Net and the fast Ethernet (up to100Mbits) for MAC E series, a configurationwhich enables several MAC E units toaccess the PLC simultaneously. Data com-munications over longer distances viamodem are also possible – this means youcan monitor and edit your configuration,programs and data from the comfort ofyour desk.

Interfaces

RS422 RS232C RS485/RS422 (optional) MELSEC A-BUS (optional) MELSEC Q-BUS (optional) PROFIBUS/DP (optional) Ethernet TP (coaxial or twisted pair,

optional) CC-Link (optional)

Supported Networks

Modem LinksEnables connections over larger dis-tances.

Ethernet and MAC-NetFor connection of multiple MAC E con-trol units to the PLC system in installa-tions extending over larger areas.

MELSECNETEnables high-speed access (up to10 Mbaud) to the PLC from multiple lo-cations via the A900GOT or the MACE900T/E900VT/ E910T.

Dual Driver supportThe MAC E series control units can beused e.g. as an interface between 2 sys-tems. This feature is supported fromO/S version 6 (not for MAC E50)

PROFIBUS/DPMAC E series control units can be con-nected as slaves in systems using theopen field bus protocol.

Multidrop-NetEnables programming and data loggingfrom a central location using a PC; theindividual stations operate autonomous-ly and independently of one another.

No-Protocoll-LinkEnables connection of barcode readersand other serial devices to the PLC viathe MAC E series control units.

A-BUS/Q-BUSDirect connection of the A900GOT andMAC E900T/900VT/910T (A-BUS only)to the PLC’s expansion port for fastcommunications.

P R O F I

U SBPROCESS FIELD BUS

MELSECNETMELSECNET

ETHERNET

INTRODUCTION AND CONFIGURATION

BASI

CS

Page 6: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

M-CARD ACCESS

ON

RESET

INPUT100-240VAC

(LG) (FG)

RUNL L

OUTPUT 12/24VDC 0,1A+- RS-232-C PARALLEL

~

MITSUBISHI

MEMORY CASSETTE

DATE 9811A

A9GT-FNB4MMODEL

4Mbytes

MITSUBISHI ELECTRIC CORPORATION

MADE IN JAPAN BD992C032H12

M-CARD ACCESS

ON

RESET

INPUT100-240VAC

(LG) (FG)

RUNL L

OUTPUT 12/24VDC 0,1A+- RS-232-C PARALLEL

~

MITSUBISHI

MEMORY CASSETTE

DATE 9811A

A9GT-FNB4MMODEL

4Mbytes

MITSUBISHI ELECTRIC CORPORATION

MADE IN JAPAN BD992C032H12

MITSUBISHI

REAR SIDE

IN

OUT

DISPLAY SIDE

A BUS INTERFACE UNIT

DATE 9806A

A9GT-BUS2SMODEL

MITSUBISHI ELECTRIC CORPORATION1~7

I / O

I / O

0~7

“EXTENSION NO.”Extension No. Switch

Slot Switch

I / O SLOT

“Use prohibited”

“Use prohibited”

8,9,0

8,9

MADE IN JAPAN BD992C032H08

MECA

GRAPHIC OPERATION TERMINAL

MITSUBISHI

POWEREXT

M-CARD ACCESS

ON

RESET

INPUT100-240VAC

(LG) (FG)

RUNL L

OUTPUT 12/24VDC 0,1A+- RS-232-C PARALLEL

~

MITSUBISHI

MEMORY CASSETTE

DATE 9811A

A9GT-FNB4MMODEL

4Mbytes

MITSUBISHI ELECTRIC CORPORATION

MADE IN JAPAN BD992C032H12

6 MITSUBISHI ELECTRICHMI

Complex processes displayed simply

The graphic operator terminals of theA900GOT series represent the top productsby MITSUBISHI ELECTRIC.

They provide a high-resolution touch-sensitive screen. State changes and userinputs can be entered easily. A vast numberof indicating instruments like indicators,pressure gauges, analog and digital

measuring devices, etc. can be replaced bycorresponding graphical objects. Lots ofready-to-use practical objects are includedin the MS Windows® compatible program-ming software and reduce program devel-opment time.

Moreover, the A900GOT is capable of dis-playing texts with up to 26,000 interna-tional characters. With the GOT the useraccesses all special function modules inorder to test individual parts of the plant.The PLC programs can be monitoredgraphically (ladder diagram).

A900GOT Series Operator Terminals

Touch-sensitive screen

Dust cover – Behind the dustcover is the mounting place for

the memory cartridge.

Network interface

RS232C interface

Insert the memory cartridge

Insert the communicationsmodule

Power supply terminal bar –The power supply unit is

already integrated

Parallelprinter interface

Interface forfuture expansions

Power indicator

Speaker connection

Extension slot formemory card

OPERATOR TERMINALS GOTBA

SICS

Page 7: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

7MITSUBISHI ELECTRIC HMI

Provided Connections for A900GOT

General Operating Conditions

Item Display Main body

Ambient temperature in operation 0 – +40 °C 0 – +55 °C

Ambient relative humidity 10 – 90 % (non-condensing)

Storage temperature -20 – +60 °C

Noise durability 1000 Vpp tested by noise generator; 1 µs at 30 – 100 Hz

Dielectric withstand voltage 1500 V AC, > 1 min / 500 V DC, > 1 min

Shock resistance 15 G (3 times each in 3 directions)

Vibration resistance 1 G: resistant to vibrations from 57 – 150 Hz for 80 min. along all 3 axes

Altitude Max. 2000 m above NN

Over-voltage category Max. 11

Pollution level Max. 2

EMC 89 / 336 / EEC and 93 / 68 / EEC

Environment Avoid environments containing aggressive gases

Cooling Self-cooling

Certifications UL / CSA / CE

MECA

GRAPHIC OPERATION TERMINAL

MITSUBISHI

POWEREXT

QJ71BR11

QJ71BR11

RUN

STATION NO.X10

X1

MODE

MNG

T.PASS D.LINK

SD RD

ERR. L ERR.

0123456789

Q64ADRUN

ERROR

A/D0~±10V0~20mA

CH1

CH2

CH3

CH4

I+

V+

I+

V+

I+

V+

I+

V-

SLD

V-

SLD

V-

SLD

V-

SLD

A.G.

(FG)

V+

1

3

5

7

9

B

D

F

2

4

6

8

A

C

E

12VDC24VDC0.5A

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

COM

QY80

FUSE

0123456789

0 1 2 3 4 5 6 7

8 9 A B C D E F

0123456789

1

3

5

7

9

B

D

F

2

4

6

8

A

C

E

NC

24VDC4mA

COM

QX800 1 2 3 4 5 6 78 9 A B C D E F

Q06HCPU

RS-232

USB

PULL

MODERUNERR.

USERBAT.

BOOT

Q06HCPU

RS-232

USB

PULL

MODERUNERR.

USERBAT.

BOOT

Q61P-A2

PULL

MITSUBISHI

POWER

BAMODSERIAL

SE UNITEL Q38B

0205020E

MITSUBISHI

0 1 2 34 5 6 78 9 10 1112 13 14 15

0 1 2 34 5 6 710 11

IN

OUT

POWER

FX -24MR1N

RUNERROR

100-240VAC

X7 X11 X13 X15X5X3X1S/S X6 X10 X12 X14

X4X2X0NL

24MR-ES/ULY10Y6Y5Y3

COM3 Y4 COM4 Y7 Y11COM2COM1COM024+

Y2Y1Y00V

System Q

MELSEC AnS/QnAS seriesMELSEC FX family

Personal Computer

FX-232CAB1

A900GOT

FX9GT-CAB0

OPERATOR TERMINALS GOT

BASI

CS

AC30/300R4-25P

QC30R2

Page 8: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

8 MITSUBISHI ELECTRICHMI

The F900GOT Series - A Windowthrough to Your MELSEC PLC

Would you like to cut your costs andimprove efficiency? You can with theF900GOT series control units.

The graphic display configuration on thetouch screen is variable, giving the operat-ing staff quick, clear and easily-compre-hensible access to information on machinefunctions.

The graphical control unit F900GOT com-bines particularly easy operation with max-imum functionality and modest spacerequirements.

In addition to standard display and diag-nostics functions this unit also supportsfully-programmable graphical images and”touch-keys”.

You can store up to 500 user-definedscreens, up to three of which can be dis-played simultaneously and overlapping onthe backlit LC display.The units feature an integrated real-timeclock, password access control and alarmand recipe handling.

Data communication with the MELSEC FX-,MELSEC AnS/QnAS or MELSEC AnU/QnA-series is performed via the RS422 port asstandard. A printer can be connected tothe integrated RS232 port.

The control unit is programmed withthe FX-PCS/DU-WIN-E or GT-Workssoftware package running on a PC underMS Windows®.Programs can be stored either in the con-trol unit’s integrated, battery-poweredRAM or in plug-in EPROM modules.

Operator Terminals F900GOT

RS422 RS232C

MITSUBISHIF930GOT-BWDMODEL

SERIAL NO. 970340 V.1 . 11

PROGRAMMABLECONTROLLER

GRAPHIC OPERATION TERMINAL

MITSUBISHI ELECTRIC CORPORATION

CAUTIONLithium

EXP-I/F

MITSUBISHIF940GOT-SWDMODEL

SERIAL NO. 912370 V.1 . 11

PROGRAMMABLECONTROLLER

GRAPHIC OPERATION TERMINAL

MITSUBISHI ELECTRIC CORPORATION

CO

M1

RS

232CC

OM

0R

S422

CN-OP

CAUTION

POWER

F940GOT F930GOT

Touch screen

Power indicator

Backup battery

RS232C interface

Extension slots forcommunication modules

RS422 interface

*The power supply unit is already integrated

Power supply terminal bar*

OPERATOR TERMINALS GOTBA

SICS

Page 9: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

9MITSUBISHI ELECTRIC HMI

Provided Connections of F900GOT Units to a MELSEC PLC System

Item F900GOT

Ambient temperature in operation 0 – +50 °C

Ambient relative humidity 35 – 85 %

Storage temperature -20 – +70 °C

Noise durability 1000 Vpp tested by noise generator; 1 µs at 30 – 100 Hz

Dielectric withstand voltage 1500 V AV, > 1 min.

Shock resistance 10 G (3 times each in 3 directions)

Vibration resistance 2 G: resistant to vibrations from 10 – 55 Hz for 2 h. along all 3 axes; 0.5 G when mounted on a DIN-rail

Insulation resistance > 5 MΩ (500 V DC)

Grounding Class 3 (100 Ω)

Environment Avoid environments containing aggressive gases

Cooling Self-cooling

Certifications UL / CSA / CE

F940GOT

MELSEC System Q

MELSEC FX family

FX-40DU-CAB/EN

QJ71BR11

QJ71BR11

RUN

STATION NO.X10

X1

MODE

MNG

T.PASS D.LINK

SD RD

ERR. L ERR.

0123456789

Q64ADRUN

ERROR

A/D0~±10V0~20mA

CH1

CH2

CH3

CH4

I+

V+

I+

V+

I+

V+

I+

V-

SLD

V-

SLD

V-

SLD

V-

SLD

A.G.

(FG)

V+

1

3

5

7

9

B

D

F

2

4

6

8

A

C

E

12VDC24VDC0.5A

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

L

COM

QY80

FUSE

0123456789

0 1 2 3 4 5 6 7

8 9 A B C D E F

0123456789

1

3

5

7

9

B

D

F

2

4

6

8

A

C

E

NC

24VDC4mA

COM

QX800 1 2 3 4 5 6 78 9 A B C D E F

Q06HCPU

RS-232

USB

PULL

MODERUNERR.

USERBAT.

BOOT

Q06HCPU

RS-232

USB

PULL

MODERUNERR.

USERBAT.

BOOT

Q61P-A2

PULL

MITSUBISHI

POWER

BAMODSERIAL

SE UNITEL Q38B

0205020E

POWER

MITSUBISHI

0 1 2 34 5 6 78 9 10 1112 13 14 15

0 1 2 34 5 6 710 11

IN

OUT

POWER

FX -24MR1N

RUNERROR

100-240VAC

X7 X11 X13 X15X5X3X1S/S X6 X10 X12 X14

X4X2X0NL

24MR-ES/ULY10Y6Y5Y3

COM3 Y4 COM4 Y7 Y11COM2COM1COM024+

Y2Y1Y00V

FX-50DU-CAB0/ENFX-232-CAB1

OPERATOR TERMINALS GOT

BASI

CS

General Operating Conditions

MELSEC AnS/QnAS series

QC30R2

Page 10: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

10 MITSUBISHI ELECTRICHMI

Text Control Panels FX-10 D-E

Specifications FX-10 DM-E FX-10 DU-E

Applicable PLC MELSEC FX MELSEC FX

Power supply V DC 5 ± 5 % (via PLC) 5 ± 5 % (via PLC)

Power consumption mA 220 220

Compensation time aftervoltage loss ms <5 <5

Fuse Via PLC Via PLC

Compatible power cable size mm2 — —

LED indicators — —

Display

type LCD LCD (backlit)

resolution 16 characters x 2 lines / 80 x 16 pixel 16 characters x 2 lines

characterheight mm 8 8

Keyboard 5 keys (membrane) 25 keys (membrane)

Memory type / capacity EEPROM / — EEPROM / 4 kB

Interfaces 1 x RS422 1 x RS422

Engaged I/O addresses None None

Real-time clock Via PLC Via PLC

System of protection IP65 IP65

Weight kg 0.15 0.2

Dimensions (WxHxD) mm 96 x 62 x 32 92 x 115 x 26

Order information Art. no. 132600 62550

Accessories For cables refer to page 42 Programming software FX-PCS/DU-WIN-E, refer to page 66 /for cables refer to page 42

OPERATOR TERMINALS GOTBA

SICS

FX-10 DM-E

FX-10 DU-E

Text control panels FX-10 DM-E / FX-10 DU-E

The text control panels FX-10 DM-E and FX-10 DU-E make thefuntions of the controlled system transparent to the user.They provide a key-oriented user-interface each and enablethe user to monitor and edit process data in the PLC.

The displays are arranged in 2 rows for 16 characters each.Functions can be invoked and values can be edited via keys.

The application will be stored in the integrated EEPROM.

Special features:

Word device monitoring Comments or message can be attached to up to 8 devices Current and set values can be altered for the displayed device Display of actual values and editing of setting values of timers

and counters, of data registers and file registers Display of the current operation of the sequential program

instructions Password protection Current time of the real-time clock can be displayed and set Display of text, programmable via the keyboard or the

FX-PCS/DU-WIN-E software (only for FX-10DU-E)

CLR FNC ENT

Page 11: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

11MITSUBISHI ELECTRIC HMI

Graphic Operator Terminals F920GOT/F930GOT with Function Keys

Graphic operation terminals F920GOT-BBD5-K-E andF930GOT-BBD-K-E

The graphical operation terminals F920GOT-BBD5-K-E andF930GOT-BBD-K-E are the entry points to the F900GOT series andare distinguished by their high degree of functionality and com-petitive price.

Instruction lists, text and changes to program execution can beentered directly via the keyboard. The F930GOT-BBD-K-E alsooffers the ability to enter changes via the integrated touch display.Both operation terminals lead the operator through the applica-tion with a blue-white display.

The background lighting on the F920GOT-BBD5-K-E may also bechanged to red in order to show alarm or other critical situationsbetter.

Special features:

Input via Keyboard (F930GOT-BBD-K-E in combinationTouchscreen)

Alarm processing Transparent mode Recipe handling Password protection Function keys (F930GOT-BBD-K-E with LED indicators) Backlight white/red (F920GOT-BBD5-K-E)

Specifications F920GOT-BBD5-K-E F930GOT-BBD-K-E

Applicable PLC All MELSEC PLC systems All MELSEC PLC systems

Applicable third party manufacturers — All major PLC manufacturers

Power supply V DC 5 (+5 / -15 %) (via PLC) 24 (+10 / -15 %)

Power consumption mA 220 200

Fuse Via PLC Built-in (not replacable)

LED indicators — 8 (green)

Display STN, 2 colours (backlit 2 colours (white/red)/ backlight lifetime 50,000 h) LCD, 2 colours (backlit / backlight lifetime 50,000 h)

Display sizepixel 128 x 64 240 x 80

mm 60 x 30 117 x 42

Touchscreen keys — Max. 50 touch-keys/screen

Keys on screen (W x H) pixel — 15 x 5

Keyboard 26 keys 28 keys

Function keys 6 function keys+ numerical keyboard 8 function keys+ numerical keyboard

Memory type / capacity 128 kB Flash-ROM 256 kB Flash-ROM

Interfaces RS232C / RS422 RS232C / RS422

Real-time clock Integrated Integrated

System of protection IP65 IP65

Weight kg 0,3 0,6

Dimensions (W x H x D) mm 106 x 134 x 35,5 168 x 183 x 37,5

Order information Art. no. 146508 146721

Accessories For programming software refer to page 66 / for cables refer to page 42

BASI

CS

7

4

1

0

8 9

5

2

-

6

3

.

ESCSET

DEV ENT

7

F1 F2 F3 F4 F5 F6

4

1

0

8 9

5

2

+/-

6

3

.

ESC

ENT

SET

DEV

OPERATOR TERMINALS GOT

F920GOT

F930GOT

Page 12: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

12 MITSUBISHI ELECTRICHMI

OPERATOR TERMINALS GOTBA

SICS

Graphic Operator Panels F900GOT

Graphic operator terminal F900GOT with touch-screen

The graphical control panels F900GOT are distinguished byextremely simple operation combined with maximum functional-ity and minimum space requirements. In addition to the standarddiagnostics and display functions the control unit also supportsuser-programmable graphical images and touch-keys.

Special features:

Alarm processing Integrated real-time clock and time channels Transparent mode Recipe handling Password protection RS232 interface Data sampling Programming with software FX-PCS/DU-WIN-E or GT-Works Battery buffered RAM (backup time and alarm history) FX-50DU-TK(S) projects can still be used.

Specifications F930GOT-BWD-E F940GOT-LWD-E F940GOT-SWD-E

Applicable PLC All MELSEC PLC systems All MELSEC PLC systems All MELSEC PLC systems

Applicable third party manufacturers All major PLC manufacturers All major PLC manufacturers All major PLC manufacturers

Power supply V DC 24 (+10 / -15 %) 24 (+10 / -15 %) 24 (+10 / -15 %)

Power consumption mA 200 390 410

Fuse A Built-in (not replacable) 2 2

LED indicators — 1 (POWER ON) 1 (POWER ON)

Display STN, 2 colours(backlit / backlight lifetime 50,000 h)

LCD, monochrome(backlit / backlight lifetime 25,000 h)

LCD, 8 colours(backlit / backlight lifetime 25,000 h)

Display sizepixel 240 x 80 320 x 240 320 x 240

mm 117 x 42 115 x 86 115 x 86

Keyboard Max. 50 touch-keys/screen Max. 50 touch-keys/screen Max. 50 touch-keys/screen

Keys on screen (W x H) pixel 15 x 5 20 x 12 20 x 12

Memory type / capacity 256 kB Flash-RAM 512 kB Flash-RAM 512 kB Flash-RAM

Interfaces RS232C / RS422 RS232C / RS422 RS232C / RS422

Real-time clock Integrated Integrated Integrated

System of protection IP65 IP65 IP65

Weight kg 0.3 1.0 1.0

Dimensions (W x H x D) mm 146 x 75 x 49 162 x 130 x 52 162 x 130 x 52

Order information Art. no. 128789 113862 113841

Accessories For programming software refer to page 66 / for cables refer to page 42

POWER

Page 13: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

13MITSUBISHI ELECTRIC HMI

OPERATOR TERMINALS GOT

BASI

CS

Graphic Operator Terminal F940WGOT

Graphic operator terminal F940WGOT with touch-screen

With the graphic operator terminal F940WGOT Mitsubishi Electricoffers you its highest performance operator terminal of theF900GOT series. It provides a 7" touch-sensitive TFT display. Thesymbols can be shown in brilliant quality with 256 colours. In addi-tion to the standard diagnostics and display functions the controlunit also supports user-programmable graphical images andtouch-keys.

The terminal can be mounted and used vertical or horizontal.

Special features:

Input using touch-sensitive TFT display Alarm processing Time channels Transparent mode Recipe handling Password protection 2 RS232 and 1 RS422 interfaces Data logging Battery buffered RAM (backup time and alarm history)

Specifications F940WGOT-TWD-E

Applicable PLC All MELSEC PLC systems

Applicable third party manufacturers All major PLC manufacturers

Power supply V DC 24 (+10 / -15 %)

Ripple voltage mV <200

Power consumption mA 650

LED indicators 1 (POWER ON)

Display TFT, 256 colours (backlit / backlight lifetime 50,000 h)

Display sizepixel 480 x 234

mm 155.5 x 87.8

Keyboard Max. 50 touch-keys/screen

Keys on screen (W x H) pixel 30 x 12

Memory type / capacity 1 MB Flash-RAM

Interfaces 2 x RS232C / 1 x RS422

Real-time clock Integrated

System of protection IP65

Weight kg 0.79

Dimensions (W x H x D) mm 215 x 133 x 70.6

Order information Art. no. 136797

Accessories For programming software refer to page 66 / for cables refer to page 42

Horizontal mounting

Vertical mounting

Page 14: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

MITSUBISHI ELECTRICHMI14

OPERATOR TERMINALS GOTBA

SICS

Handy Graphic Operator Terminals F940GOT / F943GOT Type H

Handy graphic operator terminals F940GOT / F943GOT type H

The handy graphic operator terminals F940GOT-/F943GOT type Hprovide a high-resolution fully graphical display with a touch-sen-sitive user surface and user-programmable function keys. The ter-minal also features an Emergency Stop switch.

The handy terminals can be hand-held during operation this wayproviding a larger operating range than fixed mounted terminals.An adjustable handling belt on the back side ensures secure han-dling. The handy operator terminals also provide eyelets to behung to the wall.

The handy graphic control panels are distinguished by extremelysimple operation combined with maximum functionality and mini-mum space requirements. The control unit also supports the stan-dard diagnostics and display functions.

A colour display type (F940GOT/F943GOT-SBD-H-E) or a mono-chrome display type (F940GOT/F943GOT-LBD-H-E) is available.

For special Handy GOT connection cables refer to page 44.

Special features:

Alarm processing and data sampling Integrated real-time clock and time channels Transparent mode and recipe handling Password protection Communications via RS422 (F940GOT) or RS232 (F943GOT) Programming with software GT-Works Battery buffered RAM (backup time and alarm history)

Specifications F940GOT-SBD-H-E F943GOT-SBD-H-E F940GOT-LBD-H-E F943GOT-LBD-H-E

Applicable PLC All MELSEC PLC systems All MELSEC PLC systems All MELSEC PLC systems All MELSEC PLC systems

Applicable third party manufacturers All major PLC manufacturers All major PLC manufacturers All major PLC manufacturers All major PLC manufacturers

Power supply V DC 24 (+10 / -15 %) 24 (+10 / -15 %) 24 (+10 / -15 %) 24 (+10 / -15 %)

Ripple voltage mV < 200 < 200 < 200 < 200

Power consumption mA 300 300 300 300

Fuse A 2 2 2 2

LED indicators 4 + 1 (EMERGENCY STOP) + 1 (POWER ON) 4 + 1 (EMERGENCY STOP) + 1 (POWER ON) 4 + 1 (EMERGENCY STOP) + 1 (POWER ON) 4 + 1 (EMERGENCY STOP) + 1 (POWER ON)

Display LCD, 8 colours (backlit / backlight lifetime 25000 h) LCD, monochrome (backlit / backlight lifetime 25000 h)

Display size

pixel 320 x 240 320 x 240 320 x 240 320 x 240

mm 115 x 86 115 x 86 115 x 86 115 x 86

chars. x lines 40 x 15 40 x 15 40 x 15 40 x 15

Keyboard 1 EMERGENCY STOP switch, 4 function key + max. 50 touch-keys/screen 1 EMERGENCY STOP switch, 4 function key + max. 50 touch-keys/screen

Keys on screen (W x H) Pixel 20 x 12 20 x 12 20 x 12 20 x 12

Memory type / capacity 512 kB Flash-RAM 512 kB Flash-RAM 512 kB Flash-RAM 512 kB Flash-RAM

Interfaces RS232C/RS422 2 x RS232C RS232C/RS422 2 x RS232C

Real-time clock Integrated Integrated Integrated Integrated

System of protection IP54 IP54 IP54 IP54

Weight kg 0.79 0.79 0.79 0.79

Dimensions (W x H x D) mm 156 x 191 x 63,5 156 x 191 x 63,5 156 x 191 x 63,5 156 x 191 x 63,5

Order information Art. no. 129425 139387 129426 139388

Accessories For programming software refer to page 66 / for cables refer to page 42 / special connection cabels 44

Page 15: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

MITSUBISHI ELECTRIC HMI 15

OPERATOR TERMINALS GOT

BASI

CS

Handy Graphic Operator Terminals F940GOT / F943GOT Type RH

Handy graphic operator terminal F940GOT / F943GOT type RH

The handy graphic operator terminals F940GOT-/F943GOT type RHprovide a high-resolution fully graphical display with a touch-sen-sitive user surface and user-programmable function keys. The ter-minal also features an Emergency Stop switch, a key switch and aDead-man switch, which can be integrated in the application.These safety functions are the special advantages to the standardtype H handy operator teminals F940GOT/F943GOT.

The handy terminals can be hand-held during operation this wayproviding a larger operating range than fixed mounted terminals.An adjustable handling belt on the back side ensures secure han-dling. The handy operator terminals also provide eyelets to behung to the wall.

The handy graphic control panels are distinguished by extremelysimple operation combined with maximum functionality and mini-mum space requirements. The control unit also supports the stan-dard diagnostics and display functions.

A colour display type (F940GOT/F943GOT-SBD-RH-E) or a mono-chrome display type (F940GOT/F943GOT-LBD-RH-E) is available.

For special type RH handy GOT connection cables refer to page 45.

Special features:

Alarm processing and data sampling Integrated real-time Transparent mode and recipe handling Password protection Communications via RS422 (F940GOT) or RS232 (F943GOT) Emergency Stop switch with 2 contacts Dead-man switch with 3 positions and 2 contacts Key switch with 2 positions (NO/NC)

Specifications F940GOT-SBD-RH-E F943GOT-SBD-RH-E F940GOT-LBD-RH-E F943GOT-LBD-RH-E

Applicable PLC All MELSEC PLC systems All MELSEC PLC systems All MELSEC PLC systems All MELSEC PLC systems

Applicable third party manufacturers All major PLC manufacturers All major PLC manufacturers

Power supply V DC 24 (+10 / -15 %) 24 (+10 / -15 %) 24 (+10 / -15 %) 24 (+10 / -15 %)

Ripple voltage mV < 200 < 200 < 200 < 200

Power consumption mA 300 300 300 300

Fuse A 2 2 2 2

LED indicators 4 + 1 (EMERGENCY STOP) + 1 (POWER ON) 4 + 1 (EMERGENCY STOP) + 1 (POWER ON) 4 + 1 (EMERGENCY STOP) + 1 (POWER ON) 4 + 1 (EMERGENCY STOP) + 1 (POWER ON)

Display LCD, 8 colours (backlit / backlight lifetime 25,000 h) LCD, monochrome (backlit / backlight lifetime 25,000 h)

Display size

pixel 320 x 240 320 x 240 320 x 240 320 x 240

mm 115 x 86 115 x 86 115 x 86 115 x 86

chars. x lines 40 x 15 40 x 15 40 x 15 40 x 15

Keyboard 1 EMERGENCY STOP switch, 4 function keys + max. 50 touch-keys/screen 1 EMERGENCY STOP switch, 4 function keys + max. 50 touch-keys/screen

Keys on screen (W x H) Pixel 20 x 12 20 x 12 20 x 12 20 x 12

Memory type / capacity 512 kB Flash-RAM 512 kB Flash-RAM 512 kB Flash-RAM 512 kB Flash-RAM

Interfaces RS232C/RS422 2 x RS232C RS232C/RS422 2 x RS232C

Real-time clock Integrated Integrated Integrated Integrated

System of protection IP54 IP54 IP54 IP54

Weight kg 0.87 0.87 0.87 0.87

Dimensions (W x H x D) mm 156 x 191 x 69.5 156 x 191 x 69.5 156 x 191 x 69.5 156 x 191 x 69.5

Safety functions Emergency Stop switch with 2 contacts, Dead-man switch with 3 positions and 2 contacts, key switch with 2 positions (NO/NC)

Order information Art. no. 143390 143413 143391 143414

Accessories For programming software refer to page 66 / for cables refer to page 42 / special connection cabels 45

Page 16: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

MITSUBISHI ELECTRICHMI16

OPERATOR TERMINALS GOTBA

SICS

Graphic Operator Terminals A900GOT

Specifications A985GOT-TBA-EU A975GOT-TBA-EU A970GOT-SBA-EU A970GOT-LBA-EU

Applicable PLC All MELSEC PLC systems

Applicable third party manufacturers All major PLC manufacturers

Display unit

type TFT colour LCD, 256 colourswith backlights

TFT colour display, 256 colourswith backlights

STN colour LCD, 8 colourswith backlights

STN LCD, monochromewith backlights

resolution 800 x 600 640 x 480 640 x 480 640 x 480

display size 246 x 184.5 mm / 12.1 " diagonal 211 x 158 mm / 10.4 " diagonal 211 x 158 mm / 10.4 " diagonal 211 x 158 mm / 10.4 " diagonal

Display colour 256 colours 256 colours 8 colours 2 colours (yellow/black)

Backlights Chilled cathode ray tube backlight (time until backlight switches off can be set, backlights can be replaced)

Touch-panel

touch-key points 1900 (38 rows x 50 columns) 1200 (30 rows x 40 columns) 1200 (30 rows x 40 columns) 1200 (30 rows x 40 columns)

key size 16 x 16 dots (per key)

repeat function None

Character sets Latin, Latin II, Cyrillic II, Kanji, Katakana, Hiragana, Hankul (in total 26,000 characters)

Memory

type Internal memory (Flash ROM)

application For storing project data/for storing OS

capacity 1 MB (user area) / optional extension to up to 8 MB via memory cartridge

RS232C Interface 1 slot for personal computer

Memory card interface 1 slot for PCMCIA memory card conforming to JEIDA Version 4.0 standards

Parallel interface Integrated

Video interfaces 4 camera inputs (A985GOT-TBA-V-EU) —

Miscellaneous interfaces 1 slot for memory cartridges, connector for communications adapter or optional adapters (future expansion)

Buzzer Single sound (length of sound can be adjusted)

Lifetime(at 25 °C ambienttemperature)

TFT display 50,000 hours 41,000 hours — —

STN dispay — — 50,000 houes —

EL dispay — — — 50,000 houes

backlights 40,000 hours (display unit is 50 %) 40,000 hours 10,000 hours 40,000 hours

touch-keys Min. 1 million times (at operational force of 100 g or less)

internal memory No. of writings: 100,000

I/O allocation in PLC 32 special points (for bus connection only)

System of protection IP65 (front panel); IP20 (main body)

Power supply V AC 100 – 240 (+10%, -15%)

Weight kg 2.35 1.7 1.78 1.78

Dimensions (W x H x D) mm 312 x 238 x 49 297 x 208 x 46 297 x 208 x 46 297 x 208 x 46

Order information Art. no. 131645 125602 125605 132383

Accessories For communications modules refer to page 18 / for programming software refer to page 66 / for cables refer to page 42

Graphic operator terminals A900GOT with touch-screen

The A900GOT series operator terminals provide a high-resolutionfully graphical display and a touch-sensitive user surface. All GOTscan be upgraded with up to 9 MB of flash memory. Applications canadditionally be stored in external PCMCIA memory cards. The com-munication with the connected PLC systems can be established viadifferent slot-in communications adapters.

The terminals can be integrated into the MELSECNET network.They can be connected directly to the MELSEC CPU port via theserial interface or to the MELSEC A/Q extension port via the busadapter thus supporting high-speed communications.

Special features:

Input using touch screen Text messages Analog display of process values Image-oriented guidance by touch-keys Alarm processing and Recipe handling Monitor function of the PLC sequence program Data logging Different character sets Moving sensor for screen saver Multilingual support Recipe handling

MECA

GRAPHIC OPERATION TERMINAL

MITSUBISHI

POWEREXT

Page 17: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

17MITSUBISHI ELECTRIC HMI

OPERATOR TERMINALS GOT

BASI

CS

Graphic Operator Terminal A950GOT / A953GOT

Graphic operator terminal A950GOT/A953GOT withtouch-screen

The graphic operator terminals A950 GOT and A953GOT are idealfor the first step into the HMI world. They provide a full-graphicand touch-sensitive user surface. The operator terminals have aninternal 1MB Flash-memory, that can be used to save the O/S andapplication information.

The communication can be performed with the RS422 (A950GOT)or the RS232 interface (A953GOT).

These operator terminals can be connected to all MELSEC PLC sys-tems and support also the connection to all major PLC manufac-tures. The communication ban be made via the CPU port or Com-puter-Link for MELSEC PLC systems.

Special features:

Input using touch screen Text messages Analog display of process values Image-oriented guidance by touch-keys Alarm processing Monitor function of the PLC sequence program Data logging Different character sets Multilingual support Recipe handling

Technische Daten A950GOT-LBD A953GOT-LBD A956GOT-LBD A950GOT-SBD A953GOT-SBD A956GOT-SBD

Applicable PLC All MELSEC PLC systems

Applicable third party manufacturers All major PLC manufacturers

Power supply V DC 24 (+ 10 % / -15%)

Power consumption mA 500

LED indicators 1 (POWER ON)

Display unit

type STN LCD, monochrome with backlights STN LCD, 8 colours with backlights

resolution pixel 320 x 240

display size mm 115 x 86

display colour monochrome 8 colours

Lifetime of Backlights 40,000 hours

Touch-paneltouch-key points Max. 300 touch-keys / screen

key size pixel Min. 16 x 16

Memorytype Internal Flash-ROM

capacity 1 MBbyte

Interfaces RS232C / RS422 2 x RS232C RS232C RS232C / RS422 2 x RS232C RS232C

Real-time clock —

Protection rating IP 65

Weight kg 0.5

Dimensions (W x H x D) mm 164.5 x 136 x 65

Order information Art. no. 143425 143427 149219 143424 143426 149218

Accessories For programming software refer to page 66 / for cables refer to page 42

Page 18: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

18 MITSUBISHI ELECTRICHMI

BASI

CS

OPERATOR TERMINALS GOT

Serial Communications Module A9GT-RS2/A9GT-RS4

MITSUBISHI

REAR SIDE

DISPLAY SIDE

Serial communications module A9GT-RS2/A9GT-RS4

The serial communications moduleA9GT-RS2 allows for communicationsbetween the MELSEC System Q andnumerous other equipment manufacturerPLC systems via the RS232C interface.The A9GT-RS4 permits the simple directconnection of the GOT to a MELSEC FX-,MELSEC AnS-/QnAS- or MELSECAnU-/QnA-CPU.

If the CPU is part of a network then onlyPLC systems within the same network maybe addressed.

Special features:

Easy installation on the rear side of theA970/A975/A985GOT

Communications Module for Extension Bus A-BUS

MITSUBISHI

REAR SIDE

DISPLAY SIDE

Communications module for extension bus A9GT-BUSS/A9GT-BUS2S

The communications module for theextension bus A9GT-BUSS permits a fasterresponse time for all functions via the par-allel bus connection.

The GOT is connected by the A9GT-BUSS toa PLC of the MELSEC AnS-/QnAS- orMELSEC AnU-/QnA range.

The A9GT-BUS2S allows the connection ofup to 3 GOTs to a MELSEC AnS/QnAS orAnU/QnA PLC.

Special features:

Easy installation on the rear side of theA970/A975/A985GOT

Specifications A9GT-RS4 A9GT-RS2

Connection GOT to MELSEC System Q, Computer-Link-C24 andall major PLC manufacturers

CPU of MELSEC FX, MELSECAnS/QnAS,MELSEC AnU/QnA and Computer-Link-C24

Remark CE CE

Order information Art. no. 126724 131323

A9GT-RS2

A9GT-RS4

MITSUBISHI

REAR SIDE

DISPLAY SIDE

A9GT-BUSS

A9GT-BUS2S

Specifications A9GT-BUSS A9GT-BUS2S

Connection GOT to Extension bus of th MELSEC AnS/QnAS orMELSEC AnU/QnA series / A BUS

Extension bus of th MELSEC AnS/QnAS orMELSEC AnU/QnA series / A BUS

Remark CE CE

Order information Art. no. 126725 131166

Communications Module for Extension Bus Q-BUS

Communications module for extension buss A9GT-QBUSS/A9GT-QBUS2S

The communications module for theextension bus A9GT-QBUS permits a fasterresponse time for all functions via the par-allel bus connection.

The connection to a MELSEC System Q-PLCis made with the A9GT-QBUSS.

The A9GT-QBUS2S allows the connectionof up to 5 GOTs to a MELSEC PLC.

Special features:

Easy installation on the rear side of theA970/A975/A985GOT

MITSUBISHI

REAR SIDE

DISPLAY SIDE

A9GT-QBUSS

A9GT-QBUS2S

Specifications A9GT-QBUSS A9GT-QBUS2S

Anschluss GOT an Extension bus of the MELSEC System Q / Q BUS Extension bus of the MELSEC System Q / Q BUS

Remark No CE No CE

Order information Art. no. 137689 142885

MITSUBISHI

REAR SIDE

DISPLAY SIDE

MITSUBISHI

REAR SIDE

DISPLAY SIDE

Page 19: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

19MITSUBISHI ELECTRIC HMI

OPERATOR TERMINALS GOT

BASI

CS

A8GT-J61BT13, A8GT-J61BT15

The communications adaptersA8GT-J61BT13 and A8GT-J61BT15 supportthe controlling of a PLC within the CC-Linknetwork.

The intelligent module A8GT-J61BT13enables access to all PLCs within the net-work as local station.

The remote modul A8GT-J61BT15 supportsdata transfer with the Master PLC within aspecific adress area.

Special features:

Easy installation on the rear side of theA956/A970/A975/A985GOT

RUN S0S1S2S3S4S5S6S7F.LOOPGOT R/W

SDRD

CRCOVERAB.IFTIMEDATA

UNDERF.LOOPR.LOOP

ERROR

A8GT-J61BT13

X10

X1

MODE

STATIONNO.

Specifications A8GT-J61BT13 A8GT-J61BT15

Connection GOT to CC-Link CC-Link

Application Intelligent station Remote station

Applicable GOT A956/A970/A975/A985GOT A956/A970/A975/A985GOT

Remark No CE No CE

Order information Art. no. 126726 76646

Communications Adapter for CC-Link

RUN S0S1S2S3S4S5S6S7F.LOOPGOT R/W

SDRD

CRCOVERAB.IFTIMEDATA

UNDERF.LOOPR.LOOP

ERROR

A7GT-J71LP23

X10

X1

MODE

STATIONNO. Specifications A7GT-J71LP23 A7GT-J71BR13

Connection GOT to MELSECNET/10 optical (SI-cable) MELSECNET/10 coaxial

Application Only local station Only local station

Applicable GOT A956/A970/A975/A985GOT A956/A970/A975/A985GOT

Remark No CE No CE

Order information Art. no. 56176 42934

Communications Adapter for MELSECNET/10

A7GT-J71LP23, A7GT-J71BR13

The communications adaptersA7GT-J71LP23 and A7GT-J71BR13 supportcontrolling a GOT within MELSECNET/10.

The GOT serves as local station andaccesses all PLCs within the network.

Special features:

Easy installation on the rear side of theA956/A970/A975/A985GOT

Specifications A9GT-J71E71-T

Connection GOT to Ethernet

Application Remote control and monitoring of PLCs

Applicable GOT A956/A970/A975/A985GOT

Order information Art. no. 139395

Communications Adapter for Ethernet

A9GT-JE71E71-T

The communications adapter A9GT-J71E71-Tsupports the controlling of PLCs withinETHERNET.The module provides a RJ45 interface forconnection. It supports various web fuctions,e.g. e-mail sending, FTP server and client/server functionallity.

Special features:

Easy installation on the rear side of theA956/A970/A975/A985GOTSD

RD

10BASE-T

Page 20: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

20 MITSUBISHI ELECTRICHMI

The MAC E Series - State-of-the-Art Operation and Process Design!

The MAC E operator terminals provide aunique concept of flexible display blocks.The dialog screen is displayed quickly andcan be adopted to suit the users needs.These operator terminals in many cases arecapable of replacing a complete controlconsole.

They permit simple alteration of processdata and thus influence the particularapplication.The units in the MAC E series are perfectlymatched to the range of MELSEC control-lers and yet easy to operate.

The features include user-definable text,control parameter and data editing, alarmhandling, recipes and menu operation.Programming is performed eitherdirectly on the unit itself or with anMS-Windows® compatible PC running theE-Designersoftware package.

“Dialog blocks”consisting of text and/orgraphics form the basis of all MAC E appli-cations. Via the object-orientated program-ming system, each dialog block displays allsignals and values allocated to theobject in digital and analog form.

The individual dialog blocks that makeup a MAC E application form a hierarchicaltree structure with the needed functionassigned to each dialog block. Thus, theyare adopted to the machine and processfunctions. The result is a clear operatorguidance with a clear information flow andclear text messages in case of an error.

Text and graphic blocks return static ordynamic information to the operator.

Text blocks display numeric values andtext. The display supports scrolling, so thesize of textblocks is not limited by thenumber of lines on the screen.

The blocks can be output to a printerunder PLC control.

The graphics block size is limited by thedisplay which has a resolution of240 x 64 pixel up to 640 x 480 pixel.

Static objects for example, can be dis-played in different font sizes or with prede-fined graphic objects.

Dynamic objects are predefined as well foreasier application development and can bescaled to any size.

In addition to these predefined objectsself-created bitmap graphics can beimported and managed in libraries.

1F1

NUM 68 97

2F2

0- .

3F3

4F4

5

Operator Terminals MAC E Series

OPERATOR TERMINALS MACBA

SICS

Page 21: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

21MITSUBISHI ELECTRIC HMI

Communications

All MAC E series control units are fittedwith an RS422 interface for connection tothe PLC.

Except of the MAC E50 all units provide anRS232C interface for connecting a printeror PC to the terminal.

This second port enables the unit to be runin transparent mode.

This means that the MAC E series is capableof communicating simultaneously withboth the connected PLC system and a PC(via the MX SCADA or GX IEC Developersoftware).

The MAC E units can also be linked to thePC via modem.

Another communications option is theno-protocol mode for the connection ofserial peripheral devices (e.g. bar-codereaders).

Networking

With the communications interfaceMAC-IFC-ETCX (-ETTP) an Ethernet networkcan be realized. Within this network upto 30 stations can be connected to one PLCin a segment.

The connection to open networks can beestablished through an optional interfacefor PROFIBUS/DP with a transfer rate of upto 12 Mbit.

Dual Driver

The Dual Driver is used to connect differentnetwork types. This is possible with MAC Eseries operator terminals with O/S version 6and higher (not for MAC E50).

The shown configuration is only possiblewith operator terminals which are pro-vided with two extension slots (fromMAC E700/E710/E900T/E910T).

Operating Conditions Specifications

Ambient temperature in operation 0 – +50 °C (all E series operator terminals)

Ambient relative humidity Max. 90 % (non-condensing)

Storage temperature -20 – +60 °C

Noise durability 1000 Vpp tested by noise generator; 1 µs at 30 – 100 Hz

Dielectric withstand voltage 1500 V AC, > 1 min.

Shock resistance 10 G (3 times each in 3 directions)

Vibration resistance 2 G: resistant to vibrations from 10 – 55 Hz for 2 h. along all 3 axes; 0.5 G when mounted on a DIN rail

Insulation resistance > 5 MΩ (500 V DC)

Grounding Class 3 (100 Ω)

Environment Avoid environments containing aggressive gases, install in a dust-free location.

Cooling Self-cooling

Certifications UL / CSA / CE / DNV / RINA / LR

RS232C

NO-Protocol Mode

Ethernet

Ethernet

PROFIBUS/DP

OPERATOR TERMINALS MAC

BASI

CS

Dual Driver

Page 22: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

22 MITSUBISHI ELECTRICHMI

Operator Terminal MAC E50

Specifications MAC E50

Applicable PLC MELSEC FX, MELSEC AnS and MELSEC AnU

Applicable third party manufacturers All major PLC manufacturers

Power supply V DC 5 (±5 %)

Power consumption mA 200

Displaytype LCD (backlit / lifetime 50,000 h)

dimensions mm 55.7 x 11.0

Text display 2 line x 16 characters, 5 mm character height

Graphics display —

LED indicators —

Memorycapacity kByte 16

type Flash-RAM

Interface slots for optional cards —

Function keys 4

External function keys —

Interfaces RS232C / RS422 (combined in a single interface)

Parallel interface —

Network communications —

Fieldbus network communications Modbus

Real-time clock —

Protection rating Front panel: IP65; main body: IP20

Weight kg 0.2

Dimensions (W x H x D) mm 104 x 69 x 38

Order information Art. no. 1 piece: 129590 or 10 pieces: 129589

Accessories Programming software E-Designer, art. no. 136498; refer to page 68 / for cables refer to page 43

MAC E50

The MAC E50 has a key-oriented user interface with 4 programma-ble function keys.

The screen displays 2 lines with 16 characters each. Text and edit-ing changes are entered via the input keys.

To handle the communication, there is an RS232C and an RS422interface with 25 pins onboard.

Special features:

Backlit LCD Display Up to 50 user-definable text blocks 4 function keys Binary operations Analog value increment/decrement Downloadable system program (no EPROM) Multilanguage support Windows configuration software E-Designer

OPERATOR TERMINALS MACBA

SICS

F1PREV

F2 F3 F4

Page 23: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

23MITSUBISHI ELECTRIC HMI

Operator Terminal MAC E100

MAC E100

The MAC E100 has a key-oriented user interface with 4 program-mable function keys and a numerical keyboard.

The screen displays 2 lines with 20 characters each. Recipes, text,and editing changes are entered via the input keys.

To handle the communication, there is an RS232C and an RS422interface with 25 pins onboard.

Special features:

Backlit LCD Display User-definable text blocks Function keys Time channels and Real-time clock Recipe handling Password protection Recipe processing HMI-Tools support Transparent mode Multilanguage support Downloadable driver, also for non-PLC applications

(e.g. for inverter) Demo driver for testing Dual driver support

Specifications MAC E100

Applicable PLC All MELSEC PLC systems

Applicable third party manufacturers All major PLC manufacturers

Power supply V DC 5 (±5 %)

Power consumption mA 200

Displaytype LCD (backlit / lifetime 50,000 h)

dimensions mm 73.5 x 11.5

Text display 2 lines x 20 characters, character heigth 5 mm, user-definable

Graphics display —

LED indicators —

Memorycapacity kByte 64

type Flash-RAM

Interface slots for optional cards —

Function keys 4

External function keys —

Interfaces RS232C / RS422

Parallel interface —

Network communications —

Fieldbus network communications CC-Link, Modbus

Real-time clock —

Protection rating Front panel: IP65; main body: IP20

Weight kg 0.5

Dimensions (W x H x D) mm 142 x 100 x 28

Order information Art. no. 1 piece: 88413 or 10 pieces: 88414

Accessories Programming software E-Designer, art. no. 136498; refer to page 68 / for cables refer to page 43

OPERATOR TERMINALS MAC

BASI

CS

1F1

NUM 68 97

2F2

0- .

3F3

4F4

5

Page 24: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

24 MITSUBISHI ELECTRICHMI

Operator Terminal MAC E150

OPERATOR TERMINALS MAC

MAC E150

The MAC E150 has a key-oriented user interface with 6 program-mable function keys and a numerical keyboard.

The screen displays 2 lines with 20 characters each. Recipes, text,and editing changes are entered via the input keys.

To handle the communication, there is an RS232C and an RS422interface with 25 pins onboard.

Special features:

Backlit LCD Display User-definable text blocks Function keys Numerical keyboard Time channels and Real-time clock Recipe handling Password protection Recipe processing HMI-Tools support Transparent mode Multilanguage support Downloadable driver, also for non-PLC applications

(e.g. for inverter) Demo driver for testing Dual driver support

Specifications MAC E150

Applicable PLC All MELSEC PLC systems

Applicable third party manufacturers All major PLC manufacturers

Power supply V DC 5 (±5 %)

Power consumption mA 200

Displaytype LCD (backlit / lifetime 50,000 h)

dimensions mm 73.5 x 11.5

Text display 2 lines x 20 characters, character heigth 5 mm, user-definable

Graphics display —

LED indicators —

Memorycapacity kByte 64

type Flash-RAM

Interface slots for optional cards —

Function keys 6 (user-assignable) + numerical keyboard with 12 keys

External function keys —

Interfaces RS232C / RS422

Parallel interface —

Network communications —

Fieldbus network communications CC-Link, Modbus

Real-time clock —

Protection rating Front panel: IP65; main body: IP20

Weight kg 0.5

Dimensions (W x H x D) mm 142 x 100 x 28

Order information Art. no. 135935

Accessories Programming software E-Designer, art. no. 136498; refer to page 68 / for cables refer to page 43

BASI

CS

0

4

7

5

8

6

9

1 2 3

150

Page 25: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

25MITSUBISHI ELECTRIC HMI

Operator Terminal MAC E200

MAC E200

The MAC E200 has a key-oriented user interface with 5 program-mable function keys that can be labelled and 5 LEDs.

The screen displays 4 lines with 20 characters each. Recipes, text,and editing changes are entered via the input keys.

To handle the communication, there is an RS232C and an RS422interface with 25 pins onboard.

Special features:

Backlit LCD Display User-definable text blocks Function keys and LED indicators Numerical keyboard Time channels and Real-time clock Recipe handling Password protection Recipe processing HMI-Tools support Transparent mode Multilanguage support Downloadable driver, also for non-PLC applications

(e.g. for inverter) Demo driver for testing Dual driver support

Specifications MAC E200

Applicable PLC All MELSEC PLC systems

Applicable third party manufacturers All major PLC manufacturers

Power supply V DC 24 (20 – 30)

Power consumption mA 150

Displaytype LCD (backlit / lifetime 50,000 h)

dimensions mm 70.4 x 20.8

Text display 2 lines x 20 characters, character heigth 5 mm, user-definable

Graphics display —

LED indicators 5 (2 colours: red, green)

Memorycapacity kByte 64

type Flash-RAM

Interface slots for optional cards —

Function keys 5 (user-assignable) + numerical keyboard with 12 keys

External function keys —

Interfaces RS232C / RS422

Parallel interface —

Network communications —

Fieldbus network communications CC-Link, Modbus

Real-time clock Integrated

Weight kg 0.7

Dimensions (W x H x D) mm 147 x 163.5 x 38

Order information Art. no. 69344

Accessories Programming software E-Designer, art. no. 136498; refer to page 68 / for cables refer to page 43

BASI

CS

OPERATOR TERMINALS MAC

Page 26: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

26 MITSUBISHI ELECTRICHMI

Operator Terminal MAC E300

MAC E300

The MAC E300 has a key-oriented user interface with programma-ble function keys. The graphic screen displays symbols, alarms, dia-grams, and text in variable size.

Recipes, text, and changes are edited directly via the keyboard. Pro-vided are a PLC interface, a printer port, and an optional slot forcommunications and expansion cards.

Special features:

Graphic LCD display with backlight User-definable text and graphic display Function keys and LED indicators Alarm handling Time channels and Real-time clock Recipe handling and transparent mode 1 optional slot card interface port HMI-Tools support Web en@bled (Web server, FTP, E mail and HMI network

functions) Multilanguage support Downloadable driver, also for non-PLC applications

(e.g. for inverter) Demo driver for testing Dual driver support

Specifications MAC E300

Applicable PLC All MELSEC PLC systems

Applicable third party manufacturers All major PLC manufacturers

Power supply V DC 24 (20 – 30)

Power consumption mA 350

Displaytype LCD mono (backlit / backlight lifetime 50,000 h)

dimensions mm 127.2 x 33.9

Text display 4 (8) lines x 20 (40) characters; user-definable

Graphics display 240 x 64 pixel; user-definable within resolution range

LED indicators 16 (2 colours: red, green)

Memorycapacity kByte 400 (expandable with PCMCIA card via MAC-IFC-MC to 4 or 8 MB)

type Flash-RAM

Interface slots for optional cards 1 (can be used by MAC-IFC-MC, MAC-IFC-128/E, MAC-IFC-PBDP/E, MAC-IFC-ETTP (-ETCX) or MAC-IFC-PI)

External memory card PCMCIA card via MAC-IFC-MC with 4 or 8 MB

Function keys 8 (user-assignable) + numerical keyboard with 12 keys

External function keys Max. 128 (optional with MAC-IFC-128/E)

MAC network communications devices Max. 30 Stations per Ethernet segment (optional with MAC-IFC-ETTP (-ETCX))

Interfaces RS232C / RS422; optional PROFIBUS/DP; optional Ethernet

Parallel interface Optional with MAC-IFC-PI

Network communications TCP/IP

Fieldbus network communications CC-Link, Modbus, PROFIBUS/DP, ControlLogix

Real-time clock Integrated

Weight kg 1.5 kg

Dimensions (W x H x D) mm 211.5 x 198 x 69

Order information Art. no. 64458

Accessories Programming software E-Designer, art. no. 136498; refer to page 68 / for cables refer to page 43

BASI

CS

OPERATOR TERMINALS MAC

Page 27: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

27MITSUBISHI ELECTRIC HMI

Operator Terminal MAC E600

MAC E600

The MAC E600 has a key-oriented user interface with programma-ble function keys. The graphic screen displays symbols, alarms, his-torical graphs and text in variable size.

Recipes, text and changes are edited directly via the keyboard. Pro-vided are a PLC interface, a printer port, and an optional slot forcommunications and expansion cards.

Special features:

Graphic LCD display with backlight User-definable text and graphic display Function keys and LED indicators Alarm handling Time channels and Real-time clock Historical trends, recipe handling, transparent mode 1 optional slot card interface port HMI-Tools support Web en@bled (Web server, FTP, E mail and HMI network

functions) Multilanguage support Downloadable driver, also for non-PLC applications

(e.g. for inverter) Demo driver for testing Dual driver support

Specifications MAC E600

Applicable PLC All MELSEC PLC systems

Applicable third party manufacturers All major PLC manufacturers

Power supply V DC 24 (20 – 30)

Power consumption mA 500

Displaytype LCD mono (backlit / backlight lifetime 50,000 h)

dimensions mm 120 x 64

Text display 16 lines x 40 characters; user-definable

Graphics display 240 x 128 pixel; user-definable within resolution range

LED indicators 16 (2colours: red, green))

Memorycapacity kByte 400 (expandable with PCMCIA card via MAC-IFC-MC to 4 or 8 MB)

type Flash-RAM

Interface slots for optional cards 1 (for MAC-IFC-MC, MAC-IFC-128/E, MAC-IFC-PBDP/E or MAC-IFC-ETTP(-ETCX); MAC-IFC-PI)

External memory card PCMCIA card via MAC-IFC-MC with 4 or 8 MB

Function keys 16 (user-assignable) + numerical keyboard with 12 keys

External function keys Max. 128 (optional with MAC-IFC-128E)

MAC network communications devices Max. 30 Stations per Ethernet segment (optional with MAC-IFC-ETTP (-ETCX))

Interfaces RS232C / RS422; optional PROFIBUS/DP; optional Ethernet

Parallel interface Optional with MAC-IFC-PI

Network communications TCP/IP

Fieldbus network communications CC-Link, Modbus, PROFIBUS/DP, ControlLogix

Real-time clock Integrated

Weight kg 1.4

Dimensions (W x H x D) mm 214 x 232 x 69

Order information Art. no. 104496

Accessories Programming software E-Designer, art. no. 136498; refer to page 68 / for cables refer to page 43

BASI

CS

OPERATOR TERMINALS MAC

Page 28: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

MITSUBISHI ELECTRICHMI28

Operator Terminal MAC E610

BASI

CS

OPERATOR TERMINALS MAC

MAC E610

The 16 grayscales graphics display with screen-oriented functionkeys provides user-friendly displays and operation. Recipes, text,and the sequence program can be edited directly via the key-board.

The terminal can be mounted and used horizontal or vertical.

To handle the communication, there is an RS232C, an RS485 and anRS422 interface onboard and one optional slot for communica-tions, expansion cards.

Special features:

Graphic LCD display with backlight, 16 grayscales, touch screen User-definable text and graphic blocks Alarm handling and buzzer Time channels and Real-time clock Historical trends, recipe handling, transparent mode 1 optional slot card interface port HMI-Tools support Web en@bled (Web server, FTP, E mail and HMI network

functions) Multilanguage support Downloadable driver, also for non-PLC applications

(e.g. for inverter) Dual driver support

Specifications MAC E610

Applicable PLC All MELSEC PLC systems

Applicable third party manufacturers All major PLC manufacturers

Power supply V DC 24 (20 – 30)

Power consumption mA 400

Displaytype LCD touch screen with 16 grayscales (backlit / backlight lifetime 25,000 h)

dimensions mm 115.2 x 86.4 (horizontal mounting) oder 86.4 x 115.2 (vertical mounting)

Text display User-definable

Graphics display Pixel 320 x 240 (expandable with PCMCIA card via MAC-IFC-MC to 4 or 8 MB)

LED indicators 1 (POWER ON)

Memorycapacity kByte 400 (expandable with PCMCIA card via MAC-IFC-MC to 4 or 8 MB)

type Flash-RAM

Buzzer Integrated

Function keys —

External function keys External function keys can be programmed with optional IFC-128.

Real-time clock Integrated

Interfaces RS232C / RS422 / RS485

Parallel interface Optional, with adapter IFC-PI

Network communications TCP/IP

Fieldbus network communications CC-Link, Modbus, PROFIBUS/DP, ControlLogix

Expansion slots 1

External interface to PLC PCMCIA card via MAC-IFC-MC with 4 or 8 MB

Weight kg 1.5

Dimensions (W x H x D) mm 200 x 150 x 70

Order information Art. no. 135945

Accessories Programming software E-Designer, art. no. 136498; refer to page 68 / for cables refer to page 43

Name:Type:

Page 29: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

29MITSUBISHI ELECTRIC HMI

Operator Terminal MAC E615

BASI

CS

OPERATOR TERMINALS MAC

MAC E615

The 256 colours graphics display with screen-oriented functionkeys provides user-friendly displays and operation. Recipes, text,and the sequence program can be edited directly via the key-board.

The terminal can be mounted and used horizontal or vertical.

To handle the communication, there is an RS232C, an RS485 and anRS422 interface onboard and one optional slot for communica-tions, expansion cards.

Special features:

Graphic LCD display with backlight, 16 grayscales, touch screen User-definable text and graphic blocks Alarm handling and buzzer Time channels and Real-time clock Historical trends, recipe handling, transparent mode 1 optional slot card interface port HMI-Tools support Web en@bled (Web server, FTP, E mail and HMI network

functions) Multilanguage support Downloadable driver, also for non-PLC applications

(e.g. for inverter) Dual driver support

Specifications MAC E615

Applicable PLC All MELSEC PLC systems

Applicable third party manufacturers All major PLC manufacturers

Power supply V DC 24 (20 – 30)

Power consumption mA 400

Displaytype LCD touch-screen with 256 colours (backlit / backlight lifetime 25,000 h)

dimensions mm 115.2 x 86.4 (horizontal mounting) oder 86.4 x 115.2 (vertical mounting)

Text display User-definable

Graphics display pixel 320 x 240 (horizontal mounting) or 240 x 320 (vertical mounting)

LED indicators 1 (POWER ON)

Memorycapacity kByte 400 (expandable with PCMCIA card via MAC-IFC-MC to 4 or 8 MB)

type Flash-RAM

Buzzer Integrated

Function keys —

External function keys External function keys can be programmed with optional IFC-128.

Real-time clock Integrated

Interfaces RS232C / RS422 / RS485

Parallel interface Optional, with adapter IFC-PI

Network communications TCP/IP

Fieldbus network communications CC-Link, Modbus, PROFIBUS/DP, ControlLogix

Expansion slots 1

External memory card PCMCIA card via MAC-IFC-MC with 4 or 8 MB

Weight kg 1.5

Dimensions (W x H x D) mm 200 x 150 x 70

Order information Art. no. 135946

Accessories Programming software E-Designer, art. no. 136498; refer to page 68 / for cables refer to page 43

Name:Type:

Page 30: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

30 MITSUBISHI ELECTRICHMI

Operator Terminal MAC E700

MAC E700

The 256 colours graphics display with 16 screen-oriented functionkeys provide user-friendly displays and operation. Recipes, text,and the sequence program can be edited directly via the key-board.

Eight different password levels protect the system against unau-thorized access, while 16 separate alarm groups keep youinformed on all important developments.

The terminal provides a PLC interface, a printer port, and twooptional slots for communications and expansion cards.

Special features:

Graphic LCD display with backlight mit 256 colours User-definable text and graphic blocks Alarm handling and buzzer Time channels and Real-time clock Historical trends, recipe handling, transparent mode 2 optional slot card interface ports HMI-Tools support Web en@bled (Web server, FTP, E mail and HMI network

functions) Multilanguage support Downloadable driver, also for non-PLC applications

(e.g. for inverter) Dual driver support

Specifications MAC E700

Applicable PLC All MELSEC PLC systems

Applicable third party manufacturers All major PLC manufacturers

Power supply V DC 24 (20 – 30)

Power consumption mA 550

Displaytype LCD 256 colours (backlit / backlight lifetime 25,000 h)

dimensions mm 115.2 x 86.4

Text display User-definable

Graphics display pixel 320 x 240; user-definable within resolution range

LED indicators 14 (2 colours: red, green)

Memorycapacity kByte 400 (expandable with PCMCIA card via MAC-IFC-MC to 4 or 8 MB)

type Flash-RAM

Interface slots for optional cards 2 (can be used by MAC-IFC-MC, MAC-IFC-128/E, MAC-IFC-PBDP/E, MAC-IFC-ETTP (-ETCX) or MAC-IFC-PI)

External memory card PCMCIA card via MAC-IFC-MC with 4 or 8 MB

Function keys 16 (user-assignable) + numerical keyboard with 12 keys

External function keys Max. 128 (optional with MAC-IFC-128/E)

Real-time clock Integrated

Interfaces RS232C / RS422; optional PROFIBUS/DP; optional Ethernet

Parallel interface Optional, with adapter IFC-PI

Network communications TCP/IP

Fieldbus network communications CC-Link, Modbus, PROFIBUS/DP, ControlLogix

MAC network communications devices Max. 30 Stations per Ethernet segment (optional with MAC-IFC-ETTP (-ETCX))

Weight kg 1.7

Dimensions (W x H x D) mm 276 x 198 x 87

Order information Art. no. 62488

Accessories Programming software E-Designer, art. no. 136498; refer to page 68 / for cables refer to page 43

BASI

CS

OPERATOR TERMINALS MAC

Page 31: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

31MITSUBISHI ELECTRIC HMI

Operator Terminal MAC E710

MAC E710

The terminal provides a touch-sensitive user-interface with pro-grammable touch-keys. Eight physical function keys and LEDs arelocated directly below the 16-colour graphics display.

The touch-screen interface simplies and accelerates the entry andediting of recipes, passwords, text, and parameters.

The terminal provides a PLC interface, a printer port, and twooptional slots for communications and expansion cards.

Special features:

Graphic LCD display with backlight, 256 colours, touch screen User-definable text and graphic display Alarm handling and buzzer Time channels and Real-time clock Historical trends, recipe handling, transparent mode 2 optional slot card interface ports HMI-Tools support Web en@bled (Web server, FTP, E mail and HMI network

functions) Multilanguage support Downloadable driver, also for non-PLC applications

(e.g. for inverter) Dual driver support

Specifications MAC E710

Applicable PLC All MELSEC PLC systems

Applicable third party manufacturers All major PLC manufacturers

Power supply V DC 24 (20 – 30)

Power consumption mA 600

Displaytype LCD touch-screen with 256 colours (backlit / backlight lifetime 25,000 h)

dimensions mm 115.2 x 86.4

Text display User-definable

Graphics display pixel 320 x 240; user-definable within resolution range

LED indicators 8 (2 colours: red, green)

Memorycapacity kByte 400 (expandable with PCMCIA card via MAC-IFC-MC to 4 or 8 MB)

type Flash-RAM

Interface slots for optional cards 2 (can be used by MAC-IFC-MC, MAC-IFC-128/E, MAC-IFC-PBDP/E, MAC-IFC-ETTP (-ETCX) or MAC-IFC-PI)

External memory card PCMCIA card via MAC-IFC-MC with 4 or 8 MB

Function keys 8 (user-assignable) / touch-keys

External function keys Max. 128 (optional with MAC-IFC-128/E)

Real-time clock Integrated

Interfaces RS232C / RS422; optional PROFIBUS/DP; optional Ethernet

Parallel interface Optional, with adapter IFC-PI

Network communications TCP/IP

Fieldbus network communications CC-Link, Modbus, PROFIBUS/DP, ControlLogix

MAC network communications devices Max. 30 Stations per Ethernet segment (optional with MAC-IFC-ETTP (-ETCX))

Weight kg 1.7

Dimensions (W x H x D) mm 211.5 x 198 x 87

Order information Art. no. 61520

Accessories Programming software E-Designer, art. no. 136498; refer to page 68 / for cables refer to page 43

BASI

CS

OPERATOR TERMINALS MAC

Page 32: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

32 MITSUBISHI ELECTRICHMI

Operator Terminal MAC E900T

BASI

CS

OPERATOR TERMINALS MAC

MAC E900T

The 256 colours graphics TFT-display with 22 screen-oriented func-tion keys and 20 LEDs provide user-friendly displays and operation.Recipes, text, and the sequence program can be edited directly viathe keyboard.

Eight different password levels protect the system against unau-thorized access, while sixteen separate alarm groups keep youinformed on all important developments.

The terminal provides a PLC interface, a printer port, and twooptional slots for communications and expansion cards.

Special features:

Graphic TFT display with backlight, 256 colours User-definable text and graphic display Alarm handling und time channels Historical trends, recipe handling, transparent mode 2 optional slot card interface ports HMI-Tools support Web en@bled (Web server, FTP, E mail and HMI network

functions) Multilanguage support Downloadable driver, also for non-PLC applications

(e.g. for inverter) Dual driver support

Specifications MAC E900T

Applicable PLC All MELSEC PLC systems

Applicable third party manufacturers All major PLC manufacturers

Power supply V AC 100 – 240

Power consumption mA 350

Displaytype LCD-TFT 256 colours (backlit / backlight lifetime 25,000 h)

dimensions mm 211.2 x 158.4

Text display User-definable

Graphics display pixel 640 x 480; user-definable within resolution range

LED indicators 20 (2 colours: red, green)

Memorycapacity 1.6 MB (expandable with PCMCIA card via MAC-IFC-MC to 4 or 8 MB)

type Flash-RAM

Interface slots for optional cards 2 (can be used by MAC-IFC-MC, MAC-IFC-128/E, MAC-IFC-PBDP/E, MAC-IFC-ETTP (-ETCX) or MAC-IFC-PI))

External memory card PCMCIA card via MAC-IFC-MC with 4 or 8 MB

Function keys 22 (user-assignable)

External function keys Max. 128 (optional with MAC-IFC-128/E)

Real-time clock Integrated

Interfaces RS232C / RS422; optional PROFIBUS/DP; optional Ethernet

Parallel interface Optional, with adapter IFC-PI

Network communications TCP/IP

Fieldbus network communications CC-Link, Modbus, PROFIBUS/DP, ControlLogix

MAC network communications devices Max. 30 Stations per Ethernet segment (optional with MAC-IFC-ETTP (-ETCX))

Weight kg 3.5

Dimensions (W x H x D) mm 367 x 274 x 90

Order information Art. no. 70453

Accessories Programming software E-Designer, art. no. 136498; refer to page 68 / for cables refer to page 43

Page 33: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

33MITSUBISHI ELECTRIC HMI

MAC E900VT

The 256 colours graphics TFT display with 50 screen-orientedfunction keys and 48 LEDs provide user-friendly displays andoperation. Recipes, text, and the sequence program can be editeddirectly via the keyboard.

Eight different password levels protect the system against unau-thorized access, while sixteen separate alarm groups keep youinformed on all important developments.

The terminal provides a PLC interface, a printer port, and oneoptional slot for communications and expansion cards.

Special features:

Graphic TFT display with backlight, 256 colours User-definable text and graphic display Alarm handling and time channels Historical trends, recipe handling, transparent mode 1 optional slot card interface port HMI-Tools support Web en@bled (Web server, FTP, E mail and HMI network

functions) Multilanguage support Downloadable driver, also for non-PLC applications

(e.g. for inverter) Dual driver support

Specifications MAC E900VT

Applicable PLC All MELSEC PLC systems

Applicable third party manufacturers All major PLC manufacturers

Power supply V AC 100 – 240

Power consumption mA 350

Displaytype LCD-TFT 256 colours (backlit / backlight lifetime 25,000 h)

dimensions mm 211.2 x 158.4

Text display User-definable

Graphics display pixel 640 x 480; user-definable within resolution range

LED indicators 20 (2 colours: red, green) + 28 (1 colour: green)

Memorycapacity 1.6 MB (expandable with PCMCIA card via MAC-IFC-MC to 4 or 8 MB)

type Flash-RAM

Interface slots for optional cards 1 (can be used by MAC-IFC-MC, MAC-IFC-128/E, MAC-IFC-PBDP/E, MAC-IFC-ETTP (-ETCX) or MAC-IFC-PI)

External memory card PCMCIA card via MAC-IFC-MC with 4 or 8 MB

Function keys 22 (2 colours) + 28 (1 colour), all user-assignable

External function keys Max. 128 (optional with MAC-IFC-128E)

Real-time clock Integrated

Interfaces RS232C / RS422; optional PROFIBUS/DP; optional Ethernet

Parallel interface Optional, with adapter IFC-PI

Network communications TCP/IP

Fieldbus network communications CC-Link, Modbus, PROFIBUS/DP, ControlLogix

MAC network communications devices Max. 30 Stations per Ethernet segment (optional with MAC-IFC-ETTP (-ETCX))

Weight kg 4.0

Dimensions (W x H x D) mm 335 x 430 x 90

Order information Art. no. 104734

Accessories Programming software E-Designer, art. no. 136498; refer to page 68 / for cables refer to page 43

Operator Terminal MAC E900VT

BASI

CS

OPERATOR TERMINALS MAC

Page 34: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

34 MITSUBISHI ELECTRICHMI

MAC E910T

The terminal provides a touch-sensitive user-interface with pro-grammable touch-keys on the 256 colours graphic display. Thetouch-screen interface simplies and accelerates the entry of reci-pes, texts and parameters.

Eight different password levels protect the system against unau-thorized access, while sixteen separate alarm groups keep youinformed on all important developments.

The terminal provides a PLC interface, a printer port, and twooptional slots for communications and expansion cards.

Special features:

Graphic TFT display with backlight, 256 colours, touch screen User-definable text and graphic display Alarm handling und Summer Time channels and Real-time clock Historical trends und recipe handling 2 optional slot card interface ports HMI-Tools support Web en@bled (Web server, FTP, E mail and HMI network

functions) Multilanguage support Downloadable driver, also for non-PLC applications

(e.g. for inverter) Dual driver support

Specifications MAC E910 T

Applicable PLC All MELSEC PLC systems

Applicable third party manufacturers All major PLC manufacturers

Power supply V AC 100 – 240

Power consumption mA 350

Displaytype TFT touch-screen with 256 colours (LCD, backlit, backlight lifetime 25,000 h)

dimensions mm 211.2 x 158.4

Text display User-definable

Graphics display pixel 640 x 480; user-definable within resolution range

LED indicators —

Memorycapacity 1.6 MB (expandable with PCMCIA card via MAC-IFC-MC to 4 or 8 MB)

type Flash-RAM

Interface slots for optional cards 2 (can be used by MAC-IFC-MC, MAC-IFC-128/E, MAC-IFC-PBDP/E, MAC-IFC-ETTP (-ETCX) or MAC-IFC-PI)

External memory card PCMCIA card via MAC-IFC-MC with 4 or 8 MB

Function keys — / Touch-keys

External function keys Max. 128 (optional with MAC-IFC-128/E)

Real-time clock Integrated

Interfaces RS232C / RS422; optional PROFIBUS/DP; optional Ethernet

Parallel interface Optional, with adapter IFC-PI

Network communications TCP/IP

Fieldbus network communications CC-Link, Modbus, PROFIBUS/DP, ControlLogix

MAC network communications devices Max. 30 Stations per Ethernet segment (optional with MAC-IFC-ETTP (-ETCX))

Weight kg 3.5

Dimensions (W x H x D) mm 290 x 247 x 109

Order information Art. no. 104497

Accessories Programming software E-Designer, art. no. 136498; refer to page 68 / for cables refer to page 43

Operator Terminal MAC E910T

BASI

CS

OPERATOR TERMINALS MAC

Page 35: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

35MITSUBISHI ELECTRIC HMI

BASI

CS

OPERATOR TERMINALS MAC

Industrial PC C1210

Industrial PC C1210

The industrial PC C1210 is a panel PC and it is designed for highlyadvanced tasks and is suitable for a wide range of applications.

It provides a background lit 12.1" TFT colour touch-display with800 x 600 pixel resolution. The resistive touch-display interfacesimplifies the maneuvering of operator actions.

The C1210 is compact, easy to locate and has a robust but at thesame time elegant design. The external dimensions of the C1210are a mere 354 x 270 x 92 mm, which makes it suitable for panel fit-ting. The C1210 offers good performance in a slim outfit.

Special features:

12.1" TFT colour touch-display Intel® 266 MHz Pentium® processor 6.4 GB harddrive 64 MB internal memory, can be upgraded to 128 MB One RS422 and two RS232C ports 2 USB ports Ethernet port (100 Mbit TP) Parallel port, connectors for mouse and keyboard Expandable with the PCI and the PC104 slots Windows NT4 with Service Pack 6 (SP6) preinstalled

Specifications C1210-NT

Monitor type 12.1" TFT colour touch-display, 16 million colours

Resolution pixel 800 x 600

Graphic adapter C&T 69000, 2MB SDRAM

Touchscreen method Analog resistive

Processor Intel® 266 MHz Pentium® Processor (Tillamook, no processor fan is required)

L2 cache 512 KB pipeline burst level two cache

BIOS Award 256 kB Flash BIOS

Memory 64 MB as standard (max. 128 MB, 168 Pin, DIMM, PC100, SDRAM)

Harddrive 6.4 GB, 2.5", EIDE

LED indicators 1 (POWER ON)

CD-ROM —

3.5" diskette drive —

Interfaces 2 x RS232C / 1 x RS422 / 1 x parallel port / 2 x USB

Ethernet 100Base-Tx RJ-45 connector

Expansion slots 1 x 32 bit PCI slot (2 brackets) / 2 x 16 bit PC104 slot (stacked)

Mouse PS2 compatible

Keyboard PS2 compatible

Dimensions (W x H x D) mm 354 x 270 x 92 (depth excluding PCI/PC104 cards and contacts)

Weight kg 4.0

Power supply V AC 100 - 240 V AC / 0.2 - 1.0 A (fuse, S 3, 15 A)

Protection rating IP65, NEMA 4 (front)

Ambient temperature 0 – 50 °C

Ambient relative humudity Max. 85%

Operating system MS Windows® NT4 Service Pack 6 (preinstalled)

Order information Art. no. 132138

Accessories PCI-Kit

POWER

MITSUBISHI

Page 36: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

MITSUBISHI ELECTRICHMI36

BASI

CS

OPERATOR TERMINALS MAC

Industrial PCs of the PT/BX-L600 series

Specifications IPC-PT/L600-P-1210-NT/128 IPC-PT/H600-P-1510-NT/128 IPC-BX/L600-CP-NT/128

Monitor type 12.1" TFT touch-screen, 18 bit colours 15.1" TFT touch-screen, 18 bit colours Without monitor, recommended monitor e.g.IPC-PALA-D1510-Monitor, art. no. 143486

Resolution pixel 800 x 600 1024 x 768 —

Interface for external graphic display VGA, 15 pin Mini D-SUB VGA, 15 pin Mini D-SUB VGA, 15 pin Mini D-SUB

Graphic adapter C&T B69000, 2MB VRAM C&T B69000, 2MB VRAM C&T B69000, 2MB VRAM

Touchscreen method Analog resistive Analog resistive —

Processor Low Power Mobile Celeron 400 MHz(no processor fan is required)

Low Power Mobile Celeron 400 MHz(no processor fan is required)

Low Power Mobile Celeron 400 MHz(no processor fan is required)

L2 cache 128 KB 128 KB 128 KB

BIOS Award 256 kB Flash BIOS Award 256 kB Flash BIOS Award 256 kB Flash BIOS

Memory 128 MB standard (max. 256 MB, 144 pins, SO DIMM) 128 MB standard (max. 256 MB, 144 pins, SO DIMM) 128 MB standard (max. 256 MB, 144 pins, SO DIMM)

Harddrive 10 GB, 2.5", EIDE 10 GB, 2.5", EIDE 10 GB, 2.5", EIDE

LED indicators 1 (POWER ON) 1 (POWER ON) —

CD-ROM Optional (IPC-CDR-PT/MX art. no. 143487) Optional (IPC-CDR-PT/MX art. no. 143487) Optional (IPC-CDR-PT/MX art. no. 143487)

3.5" disk drive Optional (IPC-FDD-PT/MX art. no. 143488) Optional (IPC-FDD-PT/MX art. no. 143488) Optional (IPC-FDD-PT/MX art. no. 143488)

Interfaces 2 x RS232C / 1 x RS422/RS485 /1 x parallel interface / 2 x USB

2 x RS232C / 1 x RS422/RS485 /1 x parallel interface / 2 x USB

2 x RS232C / 1 x RS422/RS485 /1 x parallel interface / 2 x USB

Ethernet 100base-TX / 10base-TRJ-45-connector 100base-TX / 10base-TRJ-45-connector 100base-TX / 10base-TRJ-45-connector

Expansion slots 2 combined PCI/ISA-Slots (half size) 2 combined PCI/ISA-Slots (half size) 2 combined PCI/ISA-Slots (half size)

Mouse PS2 compatible PS2 compatible PS2 compatible

Keyboard PS2 compatible PS2 compatible PS2 compatible

Dimensions (W x H x D) mm 370 x 307 x 139 370 x 307 x 139 262 x 262 x 115

Weight kg 7.5 7.5 4.2

Power supply V AC 85 - 132 or 170 - 265 (47 - 63 Hz)automatic adjustment

85 - 132 or 170 - 265 (47 - 63 Hz)automatic adjustment

85 - 132 or 170 - 265 (47 - 63 Hz)automatic adjustment

Protection rating Front panel: IP65, NEMA 4 / main body: IP20 Front panel: IP65, NEMA 4 / main body: IP20 —

Ambient temperature 0 – 45 °C 0 – 45 °C 0 – 45 °C

Ambient relative humudity Max. 80% Max. 80% Max. 80%

Front material Aluminium and polyester Aluminium and polyester —

Operating system MS Windows® NT4 Service Pack 6 (preinstalled) MS Windows® NT4 Service Pack 6 (preinstalled) MS Windows® NT4 Service Pack 6 (preinstalled)

Order information Art. no. 143481 143482 143483

Accessories 3.5" disk drive: IPC-FDD-PT/MX Art. no.143487, CD-ROM: IPC-CDR-PT/MX Art. no.143488

IPC-PT/L600-P-1210-NT/128, IPC-PT/L600-P-1510-NT/128,IPC-BX/L600-CP-NT/128

The advantages of the PT/BX series concept are the different varia-tions which can be combined as required. So, the IPC-BX/L600-P-NT/128 is available separately or including an integrated 12”/15”touch-screen.

Another constellation results from the combination with the exter-nal 15”touch-screen of the PALA series (IPC-PALA-D1510-Monitor).For the IPC of the PT/BX series an external floppy disk drive and aCD-ROM drive are optionally available.

Special features:

Celeron 400 MHz (no processor fan is required) 128 MB RAM as standard Ethernet interface on board 3 serial interfaces 2 PCI/ISA slots 2 PS2 ports for mouse and keyboard Front protection rating: IP65 Optional expandable with 3.5" floppy disk drive and/or

CD-ROM Available with or without integrated monitor

POWER

Page 37: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

37MITSUBISHI ELECTRIC HMI

BASI

CS

OPERATOR TERMINALS MAC

Specifications IPC-PALA-1210-NT IPC-PALA-1510-NT IPC-PALA-D1510-Monitor

Monitor type 12.1" TFT touch-screen, 18 bit colours 15.1" TFT touch-screen, 18 bit colours 15.1" TFT touch-screen, 24 bit colours

Resolution pixel 800 x 600 1024 x 768 1024 x 768

Interface for external graphic display VGA, 15 pin Mini D-SUB VGA, 15 pin Mini D-SUB VGA, 15 pin Mini D-SUB

Graphic adapter Intel 690000 , 2MB VRAM C & T 65555 , 2MB VRAM —

Touchscreen method Analog resistive Analog resistive Analog resistive

Processor Pentium®-III 850MHz Pentium®-III 850MHz —

L2 cache 256KB 256KB —

BIOS Award 256 kB Flash BIOS Award 256 kB Flash BIOS —

Memory 128 MB standard (max. 521 MB, 168 pins, DIMM) 128 MB standard (max. 521 MB, 168 pins, DIMM) —

Harddrive 30 GB, 3.5", EIDE 30 GB, 3.5", EIDE —

LED indicators — — —

CD-ROM Internal CD-ROM Internal CD-ROM —

3.5" diskette drive Internal 1.44 MB Internal 1.44 MB —

Interfaces 2 x RS232C / 1 x RS422/RS485 /1 x parallel interface / 2 x USB

2 x RS232C / 1 x RS422/RS485 /1 x parallel interface / 2 x USB —

Ethernet 100base-TX / 10base-TRJ-45-connector 100base-TX / 10base-TRJ-45-connector —

Expansion slots 1 ISA slot, 2 PCI slots (half size) 2 ISA slots, 2 PCI slots (full size) —

Mouse PS2 compatible PS2 compatible —

Keyboard PS2 compatible PS2 compatible —

Dimensions (W x H x D) mm 320 x 260 x 215.8 420 x 315 x 220 420 x 315 x 72

Weight kg 11.0 14.0 14.0

Power supply V AC 120 – 230 (50 / 60 Hz) 120 – 230 (50 / 60 Hz) 90 – 264 (50 / 60 Hz)

Protection rating IP65, NEMA 4 (front panel) IP65, NEMA 4 (front panel) IP65, NEMA 4 (front panel)

Ambient temperature 0 – 50 °C 0 – 50 °C 0 – 50 °C

Ambient relative humudity Max. 90% Max. 90% Max. 90%

Operating system MS Windows® NT4 Service Pack 6 (preinstalled) MS Windows® NT4 Service Pack 6 (preinstalled) —

Order information Art. no. 143484 143485 143486

Industrial PCs of the PALA series

IPC-PALA-1210-NT, IPC-PALA-1510-NT,IPC-PALA-D1510-Monitor

An IPC of the PALA series captivates by its excellent display, highestquality of workmanship, and best hardware performance.

The units IPC-PALA-1210/1510-NT are equipped with a Pentium® III850 MHz processor, 128 MB RAM, a floppy disk drive, a CD-ROMdrive, and a 30 GB hard disk drive. Thanks to the variety of the inte-grated interfaces you are capable of integrating this IPC into anysystem.

The optimum application range of the external touch-screen dis-play IPC-PALA-D1510-Monitor is the combination with theIPC-BX/L600-CP-NT or with a Q-PC – but also any other PC can beconnected via the RGB signal.

Special features:

Pentium® III 850 MHz 128 MB RAM as standard 30 GB harddrive Ethernet interface on board 3 serial interfaces 2 PCI/ISA slots (IPC-PALA-1210-CP-NT)

4 PCI and 2 ISA slots (IPC-PALA-1510-CP-NT) 2 PS2 ports for mouse and keyboard Internal floppy disk and CD-ROM drives Front protection rating: IP65

Page 38: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

38 MITSUBISHI ELECTRICHMI

Backlights GOT FX-DUMAC

Display Backlights

The STN and TFT displays of the GOT andMAC E include replaceable backlights.

The fluorescent tubes can be replacedeasily by the user.

Protective Film Sheets

Screen surface protection

Protective film sheets protect the sensitivescreen of the unit from scratches andreflections.

Specifications A9GT-80PSC A9GT-70PSC F9GT-40PSC F9GT-30PSCMACE610/E615Protection

MAC E710Protection

MAC E910Protection

Use for operator terminal A985GOT A970/975GOT F940GOT-LDW/SDW-E F930GOT MAC E610/E615 MAC E710 MAC E910

Type Anti-reflection

Anti-reflection

Anti-reflection

Anti-reflection

Anti-reflection

Anti-reflection

Anti-reflection

Set of 5 5 5 5 5 5 5

Order information Art. no. 137593 126731 126743 145323 142486 63570 137993

Specifications A9GT-70LTT A9GT-70LTS F9GT-40LTS F9GT-30LTBMAC E700LCD Backl.

MAC E710LCD Backl.

Use for operator terminal A970/975GOTwith TFT display

A970GOT withSTN display

F940GOT-LDW/SDW-E F930GOT MAC E700 MAC E710

Set of 1 2 1 1 1 / 1 1 / 1

Type — — — — 2400/2440 2400/2440

Order information Art. no. 126764 126727 126744 145324 103093/103094

103093/103094

ACCESSORIESBA

SICS

Keyboard Extension MAC E-Key-16 GOT FX-DUMAC

Keyboard Extension MAC E-Key-16

For all MAC E series graphical operator ter-minals (E 300 and higher) the keyboardextension E-Key-16 is available.

Up to 4 keyboard extensions can be con-nected to one operator terminal.

The keyboard extension provides 16 func-tion keys and LEDs, which can be used andprogrammed as the standard integratedkeyboard.

Specifications MAC E-Key-16

Use for operator terminal MAC E300/E600/E610/E615/E700/E710/E900T/E900VT/E910T

Application External keyboard extension for MAC E series

Interface RS232C/RS422 (MAC E610/615: RS232C/RS422 or RS485)

Order information Art. no. 148995

Page 39: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

39MITSUBISHI ELECTRIC HMI

PROFIBUS/DP Adapter GOT FX-DUMAC

Specifications MAC-IFC-PBDP/E

Use for operator terminal MAC E300/E600/E610/E615/E700/E710/E900T/E900VT/E910T

Type Plug-in board

Application PROFIBUS/DP slave

Order information Art. no. 56166

PROFIBUS/DP connection

The MAC-IFC-PBDP/E PROFIBUS/DP inter-face board supports the connection of thecontrol units of the MAC E series to aPROFIBUS/DP network.

The board is easily inserted into theaccording slot of the control unit.

Keyboard Adapter GOT FX-DUMAC

External keyboard extension

The keyboard adapter MAC-IFC128/E is amatrix diodes adapter for the keyboardextension of the MAC E operator terminals.

Up to 128 external function keys andswitches can be controlled.

Specifications MAC-IFC128/E

Use for operator terminal MAC E300/E600/E610/E615/E700/E710/E900T/E900VT/E910T

Application External keyboard extension, Diode matrix

Matrix (number of keys) User-definable (max. 128)

Order information Art. no. 62486

ACCESSORIES

BASI

CS

IFC

128E

Communications Adapter GOT FX-DUMAC

Communications Adapter

The communications adapter enables net-work communications with the controlunits. One master terminal serves up to7 slave terminals.

The optional interface card MAC-IFC-GAprovides the possibility to mont theA7GT-BUS for the connection to the

MELSEC A-BUS, the extension rack connec-tion for high speed communication.

The optional MAC-IFC-ETTP(-ETCX) inter-face cards are used for Ethernet connectionas twisted pair (ETTP) or as coaxial cable(ETCX).

Specifications MAC-IFC-GA MAC-IFC-ETTP MAC-IFC-ETCX

Use for operator terminal MAC E900T/E900VT/E910T

MAC E300/E600/E610/E615/E700/E710/E900T/E900VT/E910T

MAC E300/E600/E610/E615/E700/E710/E900T/E900VT/E910T

Type Plug-in board Plug-in board Plug-in board

Application Interface for MELSEC A-Bus,Interface card A7GT-BUS

Interface for Ethernet(twisted pair)

Interface for Ethernet(coaxial)

Order information Art. no. 88391 104727 104726

IFC

ET

TP

Page 40: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

40 MITSUBISHI ELECTRICHMI

ProfiCon-Plus PROFIBUS Connector GOT FX-DUMAC

ProfiCon-Plus / ProfiCon-Plus-PG

The ProfiCon-Plus bus connectors plugsProfiCon-Plus and ProfiCon-Plus-PG aredesigned for connecting DIN 19245 stan-dard PROFIBUS components with datatransfer rates of up to 12 Mbaud.

The ProfiCon-Plus-PG provides an addi-tional port as SAP (Service Acces Point).

Both connectors feature a metallic housingand are available with a selectable termina-tion resistor each.

ACCESSORIESBA

SICS

Specifications ProfiCon-Plus ProfiCon-Plus-PG

Data rate 12 Mbit/s Supported supported

Terminator Yes (selectable) Yes (selectable)

2. Plug for connection Not provided provided

Order information Art. no. 140008 140009

Interface cards

Into the optional interface cardMAC-IFC-MC (multicard) PCMCIA cardsof the MAC E series can be inserted.Thus the memory expansion or backupfunction can be realized.

The optional interface card MAC-IFC-PIis used for the connection of a parallelprinter via a 25 pin Sub-D connector.

MAC IFC Interface Boards GOT FX-DUMAC

Specifications MAC-IFC-MC MAC-IFC-PI

Use for operator terminalMAC E300/E600/E610/E615/

E700/E710/E900T/E900VT/E910T

MAC E300/E600/E610/E615/E700/E710/E900T/E900VT/E910T

Type Plug-in board Plug-in board

Application Interface for PCMCIA cards Interface for parallel printer

Order information Art. no. 70120 88412

Note: Please use only the PCMCIA cards art. no. 70711 or 70712 (refer to page 41)

IFC

MC

Page 41: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

41MITSUBISHI ELECTRIC HMI

Memory Cartridges for A900GOT GOT FX-DUMAC

A9GT-FNB1M / A9GT-FNB2M / A9GT-FNB4M / A9GT-FNB8M

The memory cartridges A9GT-FNBMexpand the user memory of the A970/A975/A985GOT by up to 9 MB.

At the same time, ladder diagram monitor-ing is supplied as well.

Specifications A9GT-FNB1M A9GT-FNB2M A9GT-FNB4M A9GT-FNB8M

Application for operator terminal A970/A975/A985GOT

Storage capacity 1 MB 2 MB 4 MB 8 MB

Order information Art. no. 126728 126729 126730 138808

Memory Cards GOT FX-DUMAC

Data storage

The MELCARD PCMCIA cards store datafrom/to the GOT/MAC E permanently.

The memory cards can be inserted orreplaced with the power ON.

For the A970/A975/A985GOT operator ter-minals the Q1MEM-MS memory cardscan also be used.

Specifications ADV AMC 004DFLKA ADV AMC 008DFLKA Q1MEM-1MS Q1MEM-2MS

Type SRAM SRAM Card Card

Storage capacity 4 MB 8 MB 1 MB SDRAM 2 MB SDRAM

UseBackup or memory expansion for MAC E series(please use the interface adapter MAC-IFC-MCart. no. 70120 ; see page 40)

Backup or expansion memory forA970/A975/A985GOT

Order information Art. no. 70711 70712 64197 64196

ACCESSORIES

BASI

CS

MITSUBISHI

MEMORY CASSETTE

DATE 9811A

A9GT-FNB4MMODEL

4Mbytes

MITSUBISHI ELECTRIC CORPORATION

MADE IN JAPAN BD992C032H12

Page 42: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

42 MITSUBISHI ELECTRICHMI

Overview of Cables GOT FX-DUMAC

For all GOT and MAC E series operator terminals is a wide variety ofdifferent cables available.

All cables have to be ordered separately due to the specificapplication.

Control Unit Interface Connector Cable Connector Periphery Catalogue Reference

A900GOTA9GT-RS4/

RS422D-SUB male

connector 25-pinAC30R4-25P oder AC300R4-25P

D-SUB maleconnector 25-pin

MELSEC AnS/QnASand AnU/QnA

GOT-RS422 cable,page 46

A900GOTA9GT-RS4/

RS422D-SUB male

connector 25-pinFX9GT-CAB0

MINI-DIN maleconnector 8-pin

MELSEC FXGOT-RS422 cable,

page 46

A970/A975/A985GOT A9GT-ABUSSBUS male

connector 50-pinA1S-C30B

BUS maleconnector 50 pin

MELSEC AnS/QnASGOT extension cable,

page 46

A970/A975/A985GOT A9GT-ABUSSBUS male

connector 50-pinA8GT-C30NB BUS male

connector 45 pinMELSEC AnU/QnA

GOT extension cable,page 46

A970/A975/A985GOT A9GT-QBUSSBUS male

connector 50-pinQCB BUS male

connector 50 pinMELSEC System Q

GOT connection cable,page 46

A900GOTF900GOT

RS232D-SUB male

connector 9-pinFX-232-CAB1 D-SUB male

connector 9 pinPersonal Computer

GOT connection cable,page 46

A900GOTF900GOT

A9GT-RS2/RS232

D-SUB maleconnector 9-pin

QC30R2 MINI-DIN maleconnector 6 pin

MELSEC System QGOT connection cable,

page 46

F900GOT RS422D-SUB male

connector 9-pinFX-40DU-CAB/EN D-SUB male

connector 25 pinMELSEC AnS/QnAS

and AnU/QnAGOT connection cable,

page 46

F900GOT RS422D-SUB male

connector 9-pinFX-50DU-CAB0/EN MINI-DIN male

connector 8 pinMELSEC FX

GOT connection cable,page 46

FX-10DU-EFX-10DM-E

RS422MINI-DIN maleconnector 8-pin

FX-20P-CAB0/EN MINI-DIN maleconnector 8 pin

MELSEC FXDU connection cable,

page 47

GRAPHIC OPERATION TERMINAL

MITSUBISHI

GRAPHIC OPERATION TERMINAL

MITSUBISHI

GRAPHIC OPERATION TERMINAL

MITSUBISHI

GRAPHIC OPERATION TERMINAL

MITSUBISHI

GRAPHIC OPERATION TERMINAL

MITSUBISHI

ACCESSORIESBA

SICS

GRAPHIC OPERATION TERMINAL

MITSUBISHI

GRAPHIC OPERATION TERMINAL

MITSUBISHI

Page 43: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

43MITSUBISHI ELECTRIC HMI

GOT FX-DU MAC

Cable for Third Party Manufacturers GOT FX-DUMAC

Control Unit Interface Connector Cable Connector Periphery Catalogue Reference

MAC E seriesD-SUB male

connector 25-pinCAB1 – CAB14

Depends on the PLCof the third party

manufacturerThird party PLC

MAC connection cable forthird party manufacturer,

page 48

These cables can only be used for the con-nection of an MAC E series operater termi-nal to a Third Party Manufacturer PLC.

They all have the name CAB with a specificnumber.

The table below shows an example. For fur-ther details refer to page 48.

Control Unit Interface Connector Cable Connector Periphery Catalogue Reference

MAC E series RS422D-SUB male

connector 25 pinCAB 18 (MAC40 CPU-CAB-R4) D-SUB male

connector 25 pinMELSEC AnS/QnAS

and AnU/QnAMAC connection cable,

page 47

MAC E series RS422D-SUB male

connector 25 pinCAB 19 (FX-20P-CAB/EN) MINI-DIN male

connector 8 pinMELSEC FX

MAC connection cable,page 47

MAC E series RS232D-SUB female

connector 9 pinCAB 5(MAC-PC-CAB-R2) D-SUB female

connector 9 pinPersonal Computer

MAC programming cable,page 47

MAC E900T/E900VT/E910T

BUS maleconnector 45 pin

A8GT-A1SC30NB-EUNBUS male

connector 50 pinMELSEC AnS/QnAS

GOT/MAC E900extension cable, page 46

MAC E900T/E900VT/E910T

BUS maleconnector 45 pin

A8GT-AC30B-R-EU BUS maleconnector 45 pin

MELSEC AnU/QnAGOT/MAC E900

extension cable, page 46

MAC E series RS232D-SUB male

connector 9 pinCAB16 MINI-DIN male

connector 6 pinMELSEC System Q

MAC connection cable,page 47

MAC E series RS422D-SUB male

connector 25 pinCAB17 MINI-DIN male

connector 6 pinMELSEC System Q

MAC connection cable,page 47

ACCESSORIES

BASI

CS

Page 44: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

44 MITSUBISHI ELECTRICHMI

ACCESSORIESBA

SICS

Special Connection Cables for the Graphic Handy Operator Terminals F940GOT/F943GOT

Connection of the Handy Operator Terminals F940GOT/F943GOT type H to the PLC CPU

The cable is connected to the plug on the back side of the type HHandy GOT, which provides a larger operating range than fixedmounted terminals. The cable is lead into the cabinet or panel.From there it is easy to connect the line to the PLC.

The Handy operator terminals of the F940GOT type H series fea-ture an R422 interface and the F943 type H series feature an R232interface each for communication.

The following table shows an overview about all available connec-tion cables.

Specifications F9GT-HCAB-3M F9GT-HCAB-10M F9GT-HCAB1-3M F9GT-HCAB1-10M F9GT-HCAB2-150 F9GT-HCAB3-150 F9GT-HCAB5-150

Cable type External cable for F940GOT/F943GOT type H(F943 only 3M)

External cable for F940GOT/F943GOT type Hwith untied wires (F943 only 3M) Extension cable between cabinet/panel and PLC CPU

Application Enables the mobile connection of the Handy GOTusing the interface in a cabinet or panel.

Enables the fixed connection of the Handy GOT tothe PLC CPU.

Offers the interface in a cabinet or panel for the mobile connectionof the Handy GOT

Connector 1 Internal F940GOT plug Internal F940GOT plug D-SUB maleconnector 25 pin

D-SUB maleconnector 25 pin

D-SUB maleconnector 25 pin

Connector 2 D-SUB maleconnector 25 pin — — MINI-DIN male

connector 8 pinD-SUB maleconnector 25 pin

MINI-DIN maleconnector 6 pin

Further connections — — — — For power supply and external signals

Applicable CPU type — — All MELSEC PLC systems andall major PLC manufacturers MELSEC FX CPU MELSEC AnS/QnAS

and AnU/QnA CPU MELSEC System Q CPU

Length m 3.0 10.0 3.0 10.0 1.5 1.5 1.5

Order information Art. no. 130213 130296 130297 130298 130299 130212 142538

For the connection of the PLC CPU a further cable is required (F9GT-HCAB2-150 for MELSEC FX CPU or F9GT-HCAB3-150 for MELSEC AnS/QnAS CPU or F9GT-HCAB5-150 for MELSEC System Q CPU)

Control Unit Interface Cable Switch cabinet Cable Connector Periphery

F940GOTHandy

RS422, internal connector onthe rear side of the Handy GOT

F9GT-HCAB-M F9GT-HCAB2-150MINI-DIN maleconnector 8 pin

MELSEC FX

F940GOTHandy

RS422, internal connector onthe rear side of the Handy GOT

F9GT-HCAB-M F9GT-HCAB3-150D-SUB male

connector 25 pinMELSEC FX AnS/QnAS,

AnU/QnA

F940GOTHandy

RS422, internal connector onthe rear side of the Handy GOT

F9GT-HCAB1-M with untied wiresMELSEC FX AnS/QnAS,

AnU/QnA and System Q

F943GOTHandy

RS232C, internal connector onthe rear side of the Handy GOT

F9GT-HCAB-3M F9GT-HCAB5-150MINI-DIN maleconnector 6 pin

MELSEC System Q

F943GOTHandy

RS232C, internal connector onthe rear side of the Handy GOT

F9GT-HCAB1-3M with untied wiresMELSEC FX AnS/QnAS,

AnU/QnA and System Q

Page 45: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

45MITSUBISHI ELECTRIC HMI

ACCESSORIES

BASI

CS

Connection of the Handy Operator Terminals F940GOT/F943GOT type RH to the PLC CPU

The cable is connected to the plug on the back side of the type RHHandy GOT, which provides a larger operating range than fixedmounted terminals. The cable is lead into the cabinet or panel.From there it is easy to connect the line to the PLC.

The Handy operator terminals of the F940GOT type RH series fea-ture an R422 interface and the F943 type RH series feature an R232interface each for communication.

The following table shows an overview about all available connec-tion cables.

Control Unit Interface Cable Switch cabinet Cable Connector Periphery

F940GOTHandy

RS422, internal connector onthe rear side of the Handy GOT

F9GT-RHCAB-M F9GT-RHCAB2-150MINI-DIN maleconnector 8 pin

MELSEC FX

F940GOTHandy

RS422, internal connector onthe rear side of the Handy GOT

F9GT-RHCAB-M F9GT-RHCAB3-150D-SUB male

connector 25 pinMELSEC FX AnS/QnAS,

AnU/QnA

F943GOTHandy

RS232C, internal connector onthe rear side of the Handy GOT

F9GT-RHCAB-3M F9GT-RHCAB5-150MINI-DIN maleconnector 6 pin

MELSEC System Q

Specifications F9GT-RHCAB-3M F9GT-RHCAB-6M F9GT-RHCAB-10M F9GT-RHCAB2-150 F9GT-RHCAB3-150 F9GT-RHCAB5-150

Cable type External cable for F940GOT/F943GOT type RH (F943 only 3M) Extension cable between cabinet/panel and PLC CPU

Application Enables the mobile connection of the Handy GOT using the interfacein a cabinet or panel.

Offers the interface in a cabinet or panel for the mobile connectionof the Handy GOT

Connector 1 Internal F940GOT plug D-SUB maleconnector 37 pin

D-SUB maleconnector 37 pin

D-SUB maleconnector 37 pin

Connector 2 D-SUB maleconnector 37 pin

MINI-DIN maleconnector 8 pin

D-SUB maleconnector 25 pin

MINI-DIN maleconnector 6 pin

Further connections — — — For power supply and external signals

Applicable CPU type — — — MELSEC FX CPU MELSEC AnS/QnASand AnU/QnA CPU MELSEC System Q CPU

Length m 3.0 6.0 10.0 1.5 1.5 1.5

Order information Art. no. 143415 143416 143418 143420 143421 143423

For the connection of the PLC CPU a further cable is required (F9GT-RHCAB2-150 for MELSEC FX CPU or F9GT-RHCAB3-150 for MELSEC AnS/QnAS CPU or F9GT-RHCAB5-150 for MELSEC System Q CPU).

Page 46: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

46 MITSUBISHI ELECTRICHMI

Connector cables for F900GOT

The extension cables are required for theconnection of the F900GOT operator ter-

minals to the programming connector of aMELSEC CPU.

F900GOT Connector Cable GOT FX-DUMAC

Specifications FX-50DU-CAB0/EN FX-40DU-CAB/EN QC30R2 FX-232-CAB1

GOT interface RS422 RS422 RS232 RS232

CPU-type MELSEC FX CPU MELSEC AnS/QnASand AnU/QnA CPU MELSEC System Q CPU PC

Length m 3.0 3.0 3.0 3.0

Order information Art. no. 70451 62503 128424 124972

Optical Network Cable GOT FX-DUMAC

MELSECNET/10 network cable

The optical cable is used for connectingthe individual stations in MELSECNET/10networks.

Specifications

Application MELSECNET/10 modules

Length m User-definable (Please specify when ordering)

Order information Art. no. On request

A900GOT Connector Cable GOT FX-DUMAC

Specifications AC30R4-25P AC300R4-25P FX9GT-CABO A1SCB

GOT interface A9GT-RS4 A9GT-RS4 A9GT-RS4 A9GT-ABUSS

CPU-type MELSEC AnS/QnASand AnU/QnA CPU

MELSEC AnS/QnASand AnU/QnA CPU MELSEC FX CPU MELSEC AnS/QnAS CPU

Length m 3.0 30.0 3.0 0.055–10.0 (Pleasespecify when ordering)

Order information Art. no. 23849 138809 131266 On request

Specifications A8GT-C30NB QCNB QC30R2 FX-232-CAB1

GOT interface A9GT-ABUSS A9GT-QBUSS A9GT-RS2 RS232

CPU-type MELSEC AnU/QnA CPU MELSEC System Q CPU MELSEC System Q CPU PC

Length m 3.0 0.6–10.0 (Pleasespecify when ordering) 3.0 3.0

Order information Art. no. 127731 On request 128424 124972

Connector cables for A900GOT

The extension cables are required for theconnection of the A900GOT operator ter-

minals to the programming connector of aMELSEC CPU.

ACCESSORIESBA

SICS

Page 47: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

47MITSUBISHI ELECTRIC HMI

Cable Adapter FX-20P-CADP GOT FX-DUMAC

Cable adapter FX-20P-CADP

The cable adapter FX-20P-CADP is requiredfor the FX-20P-CAB/EN cable in combina-tion with FX-40DU-CAB/EN and

FX-20DU-CAB/EN for connections with theFX family with 8-pin Mini-DIN.

Specifications FX-20P-CADP

Application 25 pin D-SUB male connector to 8-pin Mini-DIN

Length m 0.3

Order information Art. no. 31870

MAC connector cables

The cables listed below are used toconnect a unit of the MAC E-serieswith a MELSEC PLC

MAC Connector and Programming Cable GOT FX-DUMAC

Connector Cable for FX-10DU-E GOT FX-DUMAC

Connector cable FX-20P-CAB0/EN

The connector cable FX-20P-CAB0/EN isrequired for the connection between th

FX-10DU-E and FX-10DM-E control unitand the MELSEC FX series PLCs.

Specifications FX-20P-CAB0/EN

Application FX-10DU-E / FX-10DM-E to MELSEC FX CPU

Length m 1.5

Order information Art. no. 70450

ACCESSORIES

BASI

CS

Specifications CAB 5 CAB16 CAB17 CAB18 CAB19

Application for PC MELSEC System Q MELSEC System Q MELSEC AnS/QnAS,AnU/QnA MELSEC FXnS/FXnN

InterfacesMAC E-series RS232C RS232C RS422 RS422 RS422

Order informationfor Length

0.6 m — — — — 146860

3 m 124265 140461 140472 146855 146861

5 m — — — 146856 87652

7 m — — — 146857 146862

10 m — — — 146858 146863

15 m — — — 146859 146864

Page 48: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

48 MITSUBISHI ELECTRICHMI

CAB1 – CAB14

All the cables for third party manufacturerhave the name CAB with a specific number.They can only be used for MAC E series.

CAB1 is an adapter cable to be used forSiemens converter 6ES5 734-1BD20 andthe RS232 port on the MAC E terminal

CAB2 is a connection cable between AllenBradley Micrologix and the RS232 port onthe MAC E terminal.

CAB3 provides the connection of OmronHostlink PLC´s via the RS232 port on theMAC E terminal.

With CAB4 the connection betweenGE Fanuc SNPX and the RS232 port on theMAC E terminal is possible.

CAB5: connects Siemens HMI adapter forMPI and the MAC E terminal RS232 port.(same as programming cableMAC-PC-CAB-R2, art. no. 62894)

The converter cable CAB6 provides theprogramming of HMI/PLC via the RS422port on the MAC E terminal.

The converter cable CAB7 enables theconnection of MAC E terminal to SiemensS5/AS511 without using the Siemens con-verter 6ES5 734-1BD20 and CAB1.

CAB8 is a communications adapter forRS485 networks by using the RS422 port.

CAB9 is a connection cable used for theconnection of a Mitsubishi frequencyinverter of the FR-A / FR-E / FR-S series.

CAB10 is a connection cable betweenAllen Bradley PLC system SLC 500 seriesusing the DH485 protocoll.

CAB11 is an HMI adapter cable for the con-nection of a Siemens SIMATIC S7/MPI withCAB5 or CAB6.

CAB12 is a cable adapter, required whenusing a standard programming cable witha third party manufacturers PLC.

CAB13 is a connection cable used for theconnection of a MITSUBISHI servo amplifierof the MR-J2 series.

CAB14: Connection cable for MatsushitaFP0 series CPU and RS232 interface

CABDC24-5V: DC converter from 24 V DCto 5 V DC for MAC E50/E100/E150.

MAC Connector Cables for Third Party Manufacturers GOT FX-DUMAC

Specifications CAB1 CAB2 CAB3 CAB4 CAB5

Application for Siemens converter Allen BradleyMicrologix Omron Hostlink GE Fanuc SNPX Siemens HMI adapter

for MPI

InterfacesHMI RS232 RS232 RS232 RS422 RS232

PLC RS422 RS232 RS232 RS422 RS232

Length m 0.5 3.0 3.0 3.0 3.0

Order information Art. no. 124261 124262 124263 124264 124265

Specifications CAB6 CAB7 CAB8 CAB9 CAB11

Application for HMI/PLC Siemens S5/AS511 RS485 networks MITSUBISHIFR-A/E/S Siemens S7/MPI

InterfacesHMI RS422 RS422 RS422 RS422 RS232

PLC RS232 RS422 RS485 RS422 RS232

Length m 3.0 3.0 — 3.0 3.0

Order information Art. no. 124266 124267 124268 130049 132351

Specifications CAB10 CAB12 CAB13 CAB14 CABDC24-5V

Application for Allen BradleySLC 500 HMI/PLC MELSERVO MR-J2 Matsushita FP0 DC converter for

MAC E50/E100/E150

InterfacesHMI RS422 RS232 RS422 RS232 —

PLC RS422 RS232 RS422 RS232 —

Length m 3.0 — 3.0 3.0 —

Order information Art. no. 130048 188852 134894 On request 134893

With the CAB12 adapter placed on the terminals RS422 port, then it is possible to use a third party manufacturers programming cable to communicate to the PLC.The communication signals 2, 3 are crossed and it is possible to configure, via a switch, if the handshake signals, RTS/CTS, should be crossed, open or looped.

ACCESSORIESBA

SICS

Page 49: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

49MITSUBISHI ELECTRIC HMI

CR01-R2/R4 SET and CR01-R4/R4

This module is a signal repeater withelectrical isolation for RS422 signals.The regular maximum distance betweentwo CR01 modules is 1200 m.

If only one interface converter is in use,the maximum distance is 500 m.The module includes a DIN rail adapter andLEDs indicating the flow of data.

Specifications CR01-R2/R4 SET CR01-R4/R4

Conversion RS232↔RS422 RS422↔RS422

RS422 interface Terminal strip + 25 pin D-SUB male connector for both units

RS232 interface 9 pin D-SUB male connector —

Nominal voltage V AC 115 / 230 115 / 230

Voltage range V AC 90 – 130 / 150 – 255 90 – 130 / 150 – 255

Supply frequency range Hz 48 – 62 48 – 62

Power consumption VA 6 6

Protection rating IP20 IP20

Weight kg 0.55 0.55

Order information Art-Nr. 56172 56173

Interface Converter CR01-R2/R4 SET and CR01-R4/R4 GOT FX-DUMAC

ACCESSORIES

BASI

CS

Dimensions for Cutout and Cabinet mounting

Dimensions

On the following pages you will find allmajor dimensions for switchboard cutoutsand cabinet mounting for all MitsubishiElectric operator terminals.

Cabinet mounting

In cooperation with Mitsubishi Electric thecompany Rittal in Germany offers cabinetdoors with precisely fitting cutouts for allMitsubishi Electric operator terminals.

MECA

GRAPHIC OPERATION TERMINAL

MITSUBISHI

POWEREXT

Page 50: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

MITSUBISHI ELECTRICHMI50

DIMENSIONSBA

SICS

FX-10 DM-E

CLR FNC ENT

MITSUBISHIDISPLAY MODULE

MODEL

SERIAL 030002 V1.00

FX-10DM-E

MITSUBISHI ELECTRIC CORPORATION

96 32

4,5

62 53

All dimensions in mm

Switchboard cutout87 x 110

All dimensions in mm

FX-10 DU-E

115

92

26

109

6

Page 51: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

51MITSUBISHI ELECTRIC HMI

F920GOT-BBD5-K-E

BASI

CS

DIMENSIONS

F930GOT-BBD-K-E

All dimensions in mm92

106

134

7

F1 F2 F3 F4 F5 F6

4

1

0

8 9

5

2

+/-

6

3

.

ESC

ENT

SET

DEV

5

35,5

118

119

90

COM0 RS-422 COM1 RS-232C

6168154

37,5

169

183

155

170

7

4

1

0

8 9

5

2

-

6

3

.

ESCSET

DEV ENT

All dimensions in mm

Page 52: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

52 MITSUBISHI ELECTRICHMI

F930GOT-BWD-E

Switchboard cutout

146

75

45

49

65

136

RS422

+24VDC

-

RS232C

137 66x+10

+10

MITSUBISHIF930GOT-BWDMODEL

SERIAL NO. 970340 V.1 . 11

PROGRAMMABLECONTROLLER

GRAPHIC OPERATION TERMINAL

MITSUBISHI ELECTRIC CORPORATION

CAUTION

All dimensions in mm

F940GOT-SWD-E / F940GOT-LWD-E

POWER

130

152

162

120

575

24VDC

153 x 121+1

0

+1

0

MITSUBISHIF940GOT-SWDMODEL

SERIAL NO. 912370 V.1 . 11

PROGRAMMABLECONTROLLER

GRAPHIC OPERATION TERMINAL

MITSUBISHI ELECTRIC CORPORATION

CAUTION

Switchboard cutout

All dimensions in mm

DIMENSIONSBA

SICS

Page 53: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

53MITSUBISHI ELECTRIC HMI

DIMENSIONS

BASI

CS

F940GOT-LBD-H-E / F940GOT-SBD-H-E / F943GOT-LBD-H-E / F943GOT-SBD-H-E

All dimensions in mm

POWER GRIP SW

15617

2

191

13 50.5

F940GOT-LBD-RH-E / F940GOT-SBD-RH-E / F943GOT-LBD-RH-E / F943GOT-SBD-RH-E

POWER GRIP SW

156

191

13 56.5

All dimensions in mm

Page 54: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

54 MITSUBISHI ELECTRICHMI

DIMENSIONSBA

SICS

215

205

70,6

133

123

5

All dimensions in mm

Switchboard cutout206 x 124 (+1,0; -0)

Operator Terminal F940WGOT

All dimensions in mm

Operator Terminal A950/A953GOT

164 59 156

156

6 4 4

135

123

123,

56

6

POWER

MITSUBISHIRESET

INPUT 24VDC (FG)

RS-232C RS-422

EXT.

MITSUBISHI

+1,0–0,0

+1,0

–0,0

Page 55: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

55MITSUBISHI ELECTRIC HMI

DIMENSIONS

BASI

CS

Operator Terminal A970/975/985GOT

Operator Terminal GOT

Model A B C D E F G H I J K L M N

A970GOT-LBA

mm297 208 235 229 219 288 199 209 10 46 40 6 289 200A970GOT-SBA

A975GOT-TBA

A985GOT-TBA 312 238 245 245 245 301 227 237 10 49 43 6 302 228

Switchboard cutout

M + 1- 0

N+

1 -0

M-CARD ACCESS

ON

RESET

INPUT100-240VAC

(LG) (FG)

RUNL L

OUTPUT 12/24VDC 0,1A+- RS-232-C PARALLEL~

C

E

D

HBKJ

L

GRAPHIC OPERATION TERMINAL

MITSUBISHI

A

FG

II

+1– 0

+1– 0

+1– 0

+1– 0

Page 56: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

56 MITSUBISHI ELECTRIC

MAC E50

F1PREV

F2 F3 F4

104 38

57m

ax.8

06

6

4,5

86±18410 10

4

4 x ø3,5

94

59±1

69

Switchboard cutout

MAC E1006,

578

5,5

19

3

16,5MAX 80

90

12 118 12

4 × ø4,5

M4x14

RS-232RS-422

+5V DC

29

4,5 121±1130

4,5

78

80±1

0,5

1,5

Ext.DC

LCDContrast

142

Switchboard cutout

DIMENSIONSBA

SICS

All dimensions in mm

All dimensions in mm

Page 57: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

57MITSUBISHI ELECTRIC HMI

MAC E200

7ABCD

4MNOP

1YZ!?

-+/*=

5QRST

2C1-C4

0°%#:

8EFGH

200200

9IJKL

MAINLIST

6UVWX

3<> ()

•‘[

147

163,

5

38

144

1323

6,5

5

27Max 80

121

M4x15

13131335

130,

511

RS422

24V DC

RS232

Switchboard cutout123±1 x 150±1 mm

MAC E150

+5V DC

LCDContrast

+ -

Supplied by class 2 power supply

Class I, Div 2Groups A,B,C,D,T4

Ind.Cont.Eq.ForHaz.Loc.24GN

E207750

UL®C USLISTED

RS422 RS232

0

4

7

5

8

6

9

1 2 3

150

100

142

4 × ø4,5

1304,54,5

78

12 12118

M4x14

80±1

0,5

1,5

121±1

6,5

7815

,5

19

3

16,5MAX 80

29

Ext.DC

Switchboard cutout

DIMENSIONS

BASI

CS

All dimensions in mm

All dimensions in mm

Page 58: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

58 MITSUBISHI ELECTRICHMI

MAC E300

Ø4,5–8 st

211,5 3039 5,7

198

149

24,5

24,5

8181

99,7599,75

16119,25 19,25

13 10,5188

M4x15

Ø10–4 st

MAX 76MAX 110

MAC E600

RS-23224V DC RS-422

14 12188

M4x15

60,5

MAX 110

39 30

149

22,5

232

2145

MAX 76

9011

0

19,5 161 19,5100 100

5

5

ø10 ø4,5

Switchboard cutout190±2 x 153±2 mm

Switchboard cutout190±2 x 190±2 mm

DIMENSIONSBA

SICS

All dimensions in mm

All dimensions in mm

Page 59: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

59MITSUBISHI ELECTRIC HMI

MAC E610 / E615

24VDC RS-422 RS-485

138

8,7

8,7

150

200

183 89

69

MAX 76

MA

X76

5

RS-232

Switchboard cutout188 x 139 mm

DIMENSIONS

BASI

CS

All dimensions in mm

MAC E700

60

276

184 78

8 x M4x15

14

24,5

149

198

24,5

27

5,7

81

18 161131 131

4 x ø10 8 x ø4,5

81

Switchboard cutout252±2 x 153±2 mm

All dimensions in mm

Page 60: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

60 MITSUBISHI ELECTRICHMI

MAC E710

211,5

184

60

24,5

149

24,5

27

5,7

13,514

198

98,75161

Switchboard cutout185±2 x 153±2 mm

DIMENSIONSBA

SICS

All dimensions in mm

367

274

311 42

M4x20

14

61max. 110

2045

max

.70

185

24

29

6

119

10 x ø4,5

119

186,

516

117117

5

117

5

MAC E900T

Switchboard cutout341±2 x 228±2 mm

All dimensions in mm

Page 61: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

61MITSUBISHI ELECTRIC HMI

MAC E910T

61

2320

174

max

.70

23

48

130

5

262

290

137

72

107

107

137

5

8 x ø4,5

5

214 x 161 247

M4 x 20

10 max. 7515

55

Switchboard cutout264±2 x 204±2 mm

DIMENSIONS

BASI

CS

All dimensions in mm

Keyboard extension MAC E-Key-16

24VDC RS-422 RS-232 RS-4851T

x/Rx

+

Tx/R

x-

0V

2 3 41 2-

3+

200 13

max. 80

28 5,5

16895

2

6 x ø3,5

410

0

95

max. 16min. 14

22,59,5

110

22

8015

15

186±1 x 88±4 mm

All dimensions in mm

Switchboard cutout

Page 62: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

62 MITSUBISHI ELECTRICHMI

MAC E900VT

311

M4x20

10 x ø4

12,5

max. 75

335

430

VT

61

max. 110

2045 MA

X70

185

23

29

6

IFC

64E

Ext

erna

lkey

boar

d

132

132

132

86,5117115,5

11,5

Switchboard cutout313±2 x 386±2 mm

DIMENSIONSBA

SICS

All dimensions in mm

Page 63: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

63MITSUBISHI ELECTRIC HMI

Industrial PC C1210

COM1, RS-232MouseUSB x 2

Ethernet

COM2, RS-422

ParallellCOM3, RS-232Keyboard

315

238

1616

15 15

100 - 240 V AC

592345

270

POWER

MITSUBISHI

317±2

109 109109

240±

2

126

126

66

5 5

ø5,5

Switchboard cutout

DIMENSIONS

BASI

CS

All dimensions in mm

Industrial PC-BX

115

MO

US

E

LINE

OU

T

LINE

IN

MIC

UP

T

PR

INT

ER

RA

S

DV

IP

OW

ER

HD

D

PC

MC

IA

CO

M1

CO

M2

US

B100

LINK

/TX

RE

SE

T

KB

FD

126170

262

262

284

302

6856

All dimensions in mm

Page 64: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

64 MITSUBISHI ELECTRICHMI

Industrial PC-PT/L600-CP-1210-NT

DIMENSIONSBA

SICS

All dimensions in mm

251

370

189,

5

189,

5

POWER

8,5

8,5

Mouse

UP

T

PR

INT

ER

FD

VG

AU

SB

SE

RIA

L1

SE

RIA

L2R

AS

LCD

PC

MC

IA

KB

139

342

119 119 119

279

9898

98

344

119 119 119

281

9898

98

All dimensions in mm

309,1

428

233,

1

336

POWER

2121

Mouse

UP

T

PR

INT

ER

FD

VG

AU

SB

SE

RIA

L1

SE

RIA

L2R

AS

LCD

PC

MC

IA

KB

Industrial PC-PT/L600-CP-1510-NT

Page 65: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

65MITSUBISHI ELECTRIC HMI

Industrial PC PALA-D1510-Monitor

DIMENSIONS

BASI

CS

All dimensions in mm

Industrial PC PALA-1510

2166

222

295

1010

308

400 1010

56 56

420

231

4242

315

All dimensions in mm

POWER

MENU

UP

DOWN

SELECT

308,2 55,9 654

60

55,9

420

400 1010

231,

1

295

1010

41,9

541

,95

315

315

Page 66: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

66 MITSUBISHI ELECTRICHMI

MELSOFT – Programming and Documentation Software for Standard Personal Computers

With the MELSOFT software familyMitsubishi Electric offers efficient softwarepackages helping to reduce programmingand setup times to a high degree.

The MELSOFT software family providesinstant access, direct communications, com-patibility, and open exchange of variables.

The MELSOFT family comprises: Programming packages like

FX-PCS/WIN, GX Developer andGX IEC Developer

Network configuration software like forexample GX Configurator DP

Visualization software like for exampleMX SCADA

Software for a dynamic data exchangelike MX Change

Software for FX-DU operator terminalsFX-PCS/DU-WIN-E

Programming software for GOT operatorterminals GT-Works

Programming software for MAC E seriesoperator series E-Designer

PC-based HMI systems for GOT operatorterminals GT SoftGOT, and for MAC Eseries operators E-View

FX-PCS/WIN is recommended as acost-effective beginners package for theMELSEC FX family. This package offers youa quick and easy introduction to program-ming.

GX Developer FX is the right decision fora universal programming package. If addi-tionally to the FX1N and FX2N series the pro-gramming of the AnS/QnAS and AnU/QnAseries should be included, the GX Devel-oper is the right choice.

For structured programming the IEC1131.3(EN 61131-3) conform programming soft-ware GX IEC Developer is recommended.

For detailed information please order ourseparate MELSOFT brochure.

PROGRAMMINGBA

SICS

Software for the F900GOT and FX-10DU-E Control Panels GOT FX-DUMAC

FX-PCS/DU-WIN-E –The Software for FX-10DU-E and F900GOT

The programming software FX-PCS/DU-WIN-E enables the user toprogramm and manage all functions of the F900GOT seriesgraphic operator terminals and the text control panel FX-10DU-Ein an easy and user-friendly way.

Different screens can be created that display values or system con-ditions.

The software runs under MS Windows 95/98®, Windows NT® andMS Windows 2000®.

Special features:

Creation of user-defined characters Creation of text blocks as comment or alarm messages Specification of the sequence data for graphical display Transfer of the PCL data to:

the control panel a printer

Creation of recipes Fully MS Windows® compatible FX-PCS/DU-WIN-E is a part of MELSOFT.

Specifications FX-PCS/DU-WIN-E

Application FX-10 DU-E, F900GOT series

Application language Englisch

Storage media CD-ROM

Operating system MS Windows 95/98®, MS Windows NT 4.0®, MS Windows 2000®

System requirements PC with at least 4 MB RAM and 10 MB free harddisk space

Required computer interface RS232C

Order information Art. no. Full version: 146984 /Upgrade: 146985 / Update: 146986

Page 67: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

67MITSUBISHI ELECTRIC HMI

PROGRAMMING

BASI

CS

Software for the Graphic Operator Terminals GOT GOT FX-DUMAC

GT-Works

This new programming software for the graphic operator terminalsA900GOT and F900GOT is supplied for the operating systemsMS Windows 95/98®,NT® and 2000®.

The software loads the operating system, the PLC drivers, and thedifferent screens into the GOT.

Besides the editing functions of the GOT control screens, alsofailure check functions, the online help and program documentionare included in the software package.

The user is enabled in an easy and user-friendly way to manage allGOT functions via the menu driven Windows interface.

Special features:

Can be applied in all world languages(depending on the Windows character set).

Import of bitmap graphics files (BMP) Project documentation and export to a file Applicable for all GOT types Extensive graphics library Failure check (debugging) supported offline A900GOT series offline simulation GT-Works is a part of MELSOFT.

Specifications GT-Works

Application All GOT operator terminals

Application language English / Japanese

Storage media CD-ROM

Operating system MS Windows 95/98®, MS Windows NT 4.0®, MS Windows 2000®

System requirements PC with at least 32 MB RAM and 50 MB free harddisk space

Required computer interface RS232C

Graphics import Bitmap

File export File format compatible to several word processor programs

Character set All character sets usable (partially depending on the Windows language version)

Order information Art. no. Full version: 146955 / Update: 146959 / 2 & more version: 146957

Page 68: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

68 MITSUBISHI ELECTRICHMI

Programming Software for all MAC E Series Operator Terminals GOT FX-DUMAC

Specifications E-Designer

Application All MAC E series control units

Application language English, german, swedish

Storage media CD-ROM

Operating system MS Windows 95/98®, MS Windows ME®, MS Windows NT 4.0® or higher, MS Windows 2000®

System requirements PC with at least 32 MB RAM and 55 MB free harddisk space

Required computer interface RS232C

Order information Art. no. Full version: 149522 / Update: 149534 / Upgrade: 149523

E-Designer

The programming software E-Designer provides easy creation ofprojects for all control units in the MAC E series.

The block manager displays the application graphically and clearlyand saves time for the creation.

E-Designer supports the following languages on the desktop:english, german, swedish

Besondere Merkmale:

Full support of the Windows editing functions (e.g. cut, copy,paste etc.)

CD ROM for easy installation Support of the entire MAC E line Extensive documentation and storage functions Different projects can be edited simultaneously. Multilanguage support for up to 10 languages in the application Import and export of bitmaps is possible. The name list is compatible to GX IEC Developer. E-Designer is a part of MELSOFT. E-Designer is supported by MX-Change.

PROGRAMMINGBA

SICS

Page 69: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

69MITSUBISHI ELECTRIC HMI

PROGRAMMING

BASI

CS

Visualisation Software for all MAC E Series Operator Terminals GOT FX-DUMAC

E-View – The PC based HMI system

The visualization software E-View combines the easy operationand programming of an operator terminal with the advantages ofa PC - e.g. storing large amounts of data on the hard disk, sendinge-mails and SMS, or exchanging data via FTP. The application ofstandard Microsoft WindowsTM components enables the directconnection to superordinate systems.

All objects are ActiveX based. Programmers can freely arrange, set,and save their development environment and quickly get familiarwith the software. Using the high-level language editor based onVisual Basic you are free to create and freely define your own func-tions for the application development, calculation functions, andconditional events.

Applications can be visualized by up to 512 data points (tags) andthis way projected in an optimum way.

Special features:

User-definable and storable menu screens High-level language editor (Visual Basic Script) Object based on ActiveX SQL-Server, Oracle and Access connectivity Drivers for all MELSEC PLC systems included Drivers for third party manufacturers available OPC connectivity is possible Up to 512 tags

Specifications E-View

Application Programming of PC-based HMI systems

Application language English

Storage media CD-ROM

Operating system MS Windows NT 4.0® (SP6) or higher, MS Windows 2000®

System requirements Min. Pentium 266 with 64 MB RAM and 100 MB free harddisk space

Required computer interface RS422 / RS232 / Ethernet

Drivers All MELSEC PLC systems and famoust 3rd party manufacturers

Order information Art. no. Developer version: 143408 / Runtime version: 143410

Page 70: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

70 MITSUBISHI ELECTRICHMI

BASI

CS

PROGRAMMING

GT SoftGOT GOT FX-DUMAC

Programming of PC-based HMI systems

GT SoftGOT is a PC based HMI that can be integrated into allMELSEC systems. For this integration the communications can beestablished via Ethernet, Computer-Link, CPU port with Q-PC tothe Q bus directly via the backbone bus of the System Q. Therefore,all opportunities for the integration of the system into the respec-tive application are available to the user. In addition, multiple GTSoftGOT systems can be integrated into one application to gainaccess to the most different positions.

A further feature of the new software by Mitsubishi Electric is theimplemented e-mail function: By sending messages directly toanother PC or a mobile phone the user enables the service staff toinform about the machine data at once.

The applications are visualized in the graphical resolutions640 x 480, 800 x 600, 1024 x 768, or 1280 x 1024. Therefore, theuser can individually arrange a perfectly tuned constellation of PCand monitor.

Special features:

User-definable and storable menu screens Drivers for all MELSEC PLC systems included Change of A900GOT applications are not required Unlimited tags Different graphic resolutions E-mail function Storable time schedules and alarme Data exchange via data exchange lists in MS Excel®

Specifications GT SoftGOT

Application Programming of PC-based HMI systems

Application language English

Storage media CD-ROM

Operating system MS Windows 98®, MS Windows ME®, MS Windows NT 4.0® (SP6) or higher, MS Windows 2000®

System requirements Min. Pentium 266 with 64 MB RAM and 150 MB free harddisk space

Required computer interface RS422 / RS232 / Ethernet / Q bus

Drivers All MELSEC PLC systems

Order information Art. no. Developer version: 146960 / Developer update version: 146961 / Runtime version: 146962 / Runtime update version: 146963

Page 71: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

71MITSUBISHI ELECTRIC HMI

Specifications Development version Run-Time-Version

Systemrequirements

computer Pentium based 266 MHz or compatible PC with MS Windows NT®, MS Windows 2000® or MS Windows XP®

memory Min. 96 MB (MS Windows NT®)

Free harddisk space 200 MB

Networks TCP/IP (using ETHERNET or Token Ring), UDP

Operating system MS Windows®NT, MS Windows 2000® or MS Windows XP®

Options Plant 2 Business

Driver FastLinx (included with MX4)

Order information Art. no. On request On request

Reliable and redundant solutions

MX4 is a powerful tool for visualisation and control, specifically inthe area of interfacing with PLCs (with the integrated FastLinxcommunication product). MX4 SCADA’s flexibility allows systemarchitecture to be arranged in the way that best suits you -givingyou access to powerful, dynamic features for both centralised anddistributed processing. The system utilizes DCS style, built-in,redundancy that can tolerate failure anywhere in your system,with no loss of functionality or performance.

Special features:

Update 10,000 tags in 400ms Unlimited undo and redo Up to 32,000 animated objects per page Unlimited static objects per page Switc languages at runtime Support for ActiveX objects Auto resize for different resolutions Super fast display of screens Unlimited graphic pages True trend print-outs not screen dumps Dynamic selection of trend pens Export data to DBF, CSV, ASCII files, etc Runtime tool tips for operator help Trend samples from 10ms Synchronize GX IEC Developer tags Output to printer, disk files, dBASE, SQL Time-triggered or event-triggered reports Ability to include graphs in printouts Operator can add comments to reports

Process Visualisation Software MX4 SCADA and MX4 HMI

PROGRAMMING

BASI

CS

Page 72: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

72 MITSUBISHI ELECTRICHMI

ADDITIONAL OPERATING COMPONENTS

RITTAL – Command Panel Systems

Rittal Command Panel Systems are produced tai-lor-made and ready for installation for every combi-nation of Mitsubishi operating components.

The individual dimensions ensure an optimum instal-lation of the Industrial PC’s GOT series control units MAC E series control unitsin combination or, if desired, alone in the keyboardhousing. Various housing systems are available, suchas VIP 6000 and Optipanel.

Additionally the Command Panel Systems offer acomprehensive and optimum range of equipmentand accessories for every application e.g. stand andcarrier-arm systems that meet the needs of practicallyevery requirement for loading and mobility.

A wide range of additional components is avail-able, e.g. Drawers for keyboards Spacing and assembly panels for additional

command units Shelves for mouse and pad and much moreAll the installation dimensions of the operationterminals from Mitsubishi Electric which arerequired for a problem-free and quick installa-tion, are known to Rittal, ensuring optimuminstallation of the operation terminals.

For detailed information please see the Rittalmanual or the special Command Panel bro-chures. Please order these direct from Rittal orcontact your Rittal representative.

®

Rittal VIP 6000

Rittal VIP 6000

The multi-talent in shape and function.The enlargement of the surface area using cooling fins and screwchannels is the most reliable and cost effective way of dissipatingheat.

Special features:

3 frame options (broad, narrow or combined), depending onthe application and design requirements

Optimum heat dissipation through 3 housing options Diverse housing connectors Surrounding Keder profile, 3 options in 6 colors Surrounding screw channels for flexible interior completion Rear wall screwed or hinged

Specifications VIP 6000

Material Aluminium extruded section

SurfaceHousing Naturally anodized

Front frame andcorner pieces

RAL 7035 (light gray)RAL 7024 on the side for combined frame

Protection rating IP 65

Installation depth mm 155 – 498

Installation depthkeyboard housing mm 27, 44, 105

Rittal GmbH & Co.KGPostfach 1662D-35726 HerbornTel.: (02772) 505-0Fax: (02772) 505-2319eMail:[email protected]: www.rittal.de

Page 73: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

73MITSUBISHI ELECTRIC HMI

ADDITIONAL OPERATING COMPONENTS

Rittal Optipanel

Rittal Optipanel

The slim design alternative.

Special features:

Surrounding Keder profile Keyboard housing swivel angle infinitely variable between 80

and 155° Surrounding T-groove for flexible interior completion Rear wall screwed or hinged

Specifications Optipanel

Material Aluminium extruded section

Surface

Housing Naturally anodized

Corner pieces RAL 7035 (light gray)

Keder and cornercovers RAL 7024 (graphite grey)

Protection rating IP 65

Installation depth mm 50, 100, 150

Carrier-arm systems

Optimum operations at the man / machine interface are ensuredby the different carrier-arm systems. Use the diverse combinationsto meet your special requirements.

Carrier-arm system CP-Scompact, for small and flat operating housings(profile cross-section = ∅ 48 mm)

Carrier-arm system CP-Lfor small to medium operating housings(profile cross-section = 85 x 50 mm)

Carrier-arm system CP-XLopen for easy introduction of cables, closed for large loads(profile cross-section = 155 x 80 mm)

Carrier-arm Systems

Stand systems

Stationary Mobile Adjustable height Stand column as stable base for carrier-arm systems

Stand Systems

CP-S CP-L

CP-XL

Page 74: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

74 MITSUBISHI ELECTRIC

Company: . . . . . . . . . . . . . . . . . . . . .

Department: . . . . . . . . . . . . . . . . . . . . .

Street: . . . . . . . . . . . . . . . . . . . . .

Address: . . . . . . . . . . . . . . . . . . . . .

Phone: . . . . . . . . . . . . . . . . . . . . .

Fax: . . . . . . . . . . . . . . . . . . . . .

Order information

Pos. Number Item (type) Article number Description Remarks

MITSUBISHI ELECTRIC EUROPE B.V.

Industrial Automation / German Branch

Gothaer Str. 8

D-40880 Ratingen

Fax: +49 2102 486-71 70

Notes when ordering:

When ordering, please use only the type designations and order numbers shown in this catalogue.

ORDER FORM

Page 75: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

75MITSUBISHI ELECTRIC HMI

AccessoriesA1SCB . . . . . . . . . . . . . 46

A8GT-C30NB . . . . . . . . . . 46

A9GT-70LTT. . . . . . . . . . . 38

A9GT-70PSC . . . . . . . . . . 38

A9GT-80PSC . . . . . . . . . . 38

A9GT-FNB1M . . . . . . . . . . 41

A9GT-FNB2M . . . . . . . . . . 41

A9GT-FNB4M . . . . . . . . . . 41

A9GT-FNB8M . . . . . . . . . . 41

AC300R4-25P. . . . . . . . . . 46

AC30R4-25P . . . . . . . . . . 46

ADV AMC 004DFLKA . . . . . 41

ADV AMC 008DFLKA . . . . . 41

Backlights . . . . . . . . . . . . 38

CAB1–CAB13 . . . . . . . . 47,48

Communications adapter . . 39

CR01-R2/R4 SET . . . . . . . . 49

CR01-R4/R4 . . . . . . . . . . . 49

F9GT-40LTS . . . . . . . . . . . 38

F9GT-40PSC . . . . . . . . . . 38

FX-20P-CADP. . . . . . . . . . 47

FX-232-CAB1 . . . . . . . . . . 46

FX9GT-CABO . . . . . . . . . . 46

Interface converter . . . . . . 49

Keyboard adapter . . . . . . . 39

MAC E610/E615 Protection . 38

MAC E710 Protection. . . . . 38

MAC E910 Protection. . . . . 38

MAC E-Key-16 . . . . . . . . . 38

MAC-IFC128 . . . . . . . . . . 39

MAC-IFC-GA . . . . . . . . . . 39

MAC-IFC-MC . . . . . . . . . . 39

MAC-IFC-PBDP/E . . . . . . . 39

MAC-IFC-PI . . . . . . . . . . . 39

MAC-IFC interface cards . . . 40

Optical Cables . . . . . . . . . 46

ProfiCon-Plus . . . . . . . . . . 40

ProfiCon-Plus-PG . . . . . . . 40

Protective film sheets . . . . 38

Q1MEM-1MS . . . . . . . . . . 41

Q1MEM-2MS . . . . . . . . . . 41

QC30R2 . . . . . . . . . . . . . 46

QCNB . . . . . . . . . . . . . 46

BacklightsA9GT-70LTS . . . . . . . . . . . 38

A9GT-70LTT. . . . . . . . . . . 38

F9GT-40LTS . . . . . . . . . . . 38

MAC E700 LCD Backl. . . . . . 38

MAC E710 LCD Backl. . . . . . 38

Cable adapterFX-20P-CADP. . . . . . . . . . 47

CablesA1SCB . . . . . . . . . . . . . 46

A8GT-C30NB . . . . . . . . . . 46

AC300R4-25P. . . . . . . . . . 46

AC30R4-25P . . . . . . . . . . 46

CAB1–CAB14 . . . . . . . . . . 48

CAB5–CAB19 . . . . . . . . . . 47

F9GT-HCAB-10M . . . . . . . 44

F9GT-HCAB1-10M . . . . . . . 44

F9GT-HCAB1-3M . . . . . . . 44

F9GT-HCAB2-150 . . . . . . . 44

F9GT-HCAB3-150 . . . . . . . 44

F9GT-HCAB-3M . . . . . . . . 44

F9GT-HCAB5-150 . . . . . . . 44

F9GT-RHCAB-10M. . . . . . . 45

F9GT-RHCAB2-150 . . . . . . 45

F9GT-RHCAB3-150 . . . . . . 45

F9GT-RHCAB-3M . . . . . . . 45

F9GT-RHCAB5-150 . . . . . . 45

F9GT-RHCAB-6M . . . . . . . 45

FX-20P-CAB0/EN. . . . . . . . 47

FX-20P-CADP. . . . . . . . . . 47

FX-232-CAB1 . . . . . . . . . . 46

FX-40DU-CAB/EN . . . . . . . 46

FX-50DU-CAB/EN . . . . . . . 46

FX9GT-CAB0 . . . . . . . . . . 46

Overview . . . . . . . . . . . . 42

QC30R2 . . . . . . . . . . . . . 46

QCNB . . . . . . . . . . . . . 46

Third party manufactures . . 48

Communications adapterMAC-IFC-ETCX . . . . . . . . . 38

MAC-IFC-ETTP . . . . . . . . . 38

MAC-IFC-GA . . . . . . . . . . 38

Communications andnetwork modules

A7GT-J71BR13 . . . . . . . . . 19

A7GT-J71LP23 . . . . . . . . . 19

A8GT-J61BT13 . . . . . . . . . 19

A8GT-J61BT15 . . . . . . . . . 19

A9GT-J71E71-T. . . . . . . . . 19

A9GT-BUSS . . . . . . . . . . . 18

A9GT-QBUSS . . . . . . . . . . 18

A9GT-RS2 . . . . . . . . . . . . 18

DimensionsFX-10 series . . . . . . . . . . . 50

GOT series . . . . . . . . . . 50,52

Industrial PCs. . . . . . . . . . 63

MAC E series . . . . . . . . . . 56

Industrial PCsC1210 . . . . . . . . . . . . . . 35

IPC-BX/L600-CP-NT . . . . . . 36

IPC-PALA-1210-NT. . . . . . . 37

IPC-PALA-1510-NT. . . . . . . 37

IPC-PALA-D1510-Monitor . . 37

IPC-PT/L600-CP-1210-NT . . 36

IPC-PT/L600-CP-1510-NT . . 36

Keyboard adapterMAC-IFC128/E . . . . . . . . . 39

MAC IFC interface cardMAC-IFC-MC . . . . . . . . . . 39

Operator terminalsA950GOT-LBD . . . . . . . . . 17

A950GOT-SBD . . . . . . . . . 17

A953GOT-LBD . . . . . . . . . 17

A953GOT-SBD . . . . . . . . . 17

A956GOT-LBD . . . . . . . . . 17

A970GOT-LBA-EU . . . . . . . 16

A970GOT-SBA-EU . . . . . . . 16

A975GOT-TBA-EU . . . . . . . 16

A985GOT-TBA-EU . . . . . . . 16

F920GOT-BBD5-K-E . . . . . . 11

F930GOT-BBD-K-E. . . . . . . 11

F930GOT-BWD-E . . . . . . . 12

F940GOT-LBD-H-E. . . . . . . 14

F940GOT-LBD-RH-E . . . . . . 15

F940GOT-LWD-E . . . . . . . . 12

F940GOT-SBD-H-E. . . . . . . 14

F940GOT-SBD-RH-E . . . . . . 15

F940GOT-SWD-E. . . . . . . . 12

F940WGOT-LWD-E . . . . . . 13

F943GOT-LBD-H-E. . . . . . . 14

F943GOT-LBD-RH-E . . . . . . 15

F943GOT-SBD-H-E. . . . . . . 14

F943GOT-SBD-RH-E . . . . . . 15

FX-10 DM-E . . . . . . . . . . . 10

FX-10 DU-E . . . . . . . . . . . 10

MAC E100 . . . . . . . . . . . . 23

MAC E150 . . . . . . . . . . . . 24

MAC E200 . . . . . . . . . . . . 25

MAC E300 . . . . . . . . . . . . 26

MAC E50. . . . . . . . . . . . . 22

MAC E600 . . . . . . . . . . . . 27

MAC E610 . . . . . . . . . . . . 28

MAC E615 . . . . . . . . . . . . 29

MAC E700 . . . . . . . . . . . . 30

MAC E710 . . . . . . . . . . . . 31

MAC E900T . . . . . . . . . . . 32

MAC E900VT . . . . . . . . . . 33

MAC E910T . . . . . . . . . . . 34

OverviewsCables . . . . . . . . . . . . . . 42

General . . . . . . . . . . . . . . 4

GOT series . . . . . . . . . . . . 6

MAC E series . . . . . . . . . . 20

Networks . . . . . . . . . . . . . 5

Product range . . . . . . . . . . 4

PROFIBUS/DP adapterMAC-IFC-PBDP/E . . . . . . . 39

ProfiCon-Plus . . . . . . . . . . 40

ProfiCon-Plus-PG . . . . . . . 40

RittalCarrier-arm systems . . . . . 73

Optipanel . . . . . . . . . . . . 73

Stand systems . . . . . . . . . 73

VIP 6000 . . . . . . . . . . . . . 72

SoftwareE-Designer . . . . . . . . . . . 68

E-View . . . . . . . . . . . . . . 69

FX-PCS/DU-WIN-E . . . . . . . 66

GT SoftGOT . . . . . . . . . . . 70

GT-Works . . . . . . . . . . . . 67

MX4 SCADA. . . . . . . . . . . 71

Storage mediaA9GT-FNB1M . . . . . . . . . . 41

A9GT-FNB2M . . . . . . . . . . 41

A9GT-FNB4M . . . . . . . . . . 41

Q1MEM-1MS . . . . . . . . . . 41

Q1MEM-2MS . . . . . . . . . . 41

INDEX

Page 76: Technical Catalogue HMI - Siemens PLC Training Online · Technical Catalogue MITSUBISHI ELECTRIC 2004. 2 HMI MITSUBISHI ELECTRIC Additional Services You will find current information

MITSUBISHI ELECTRICSpecifications subject to change.Art. no. 68542-J, Printed in Germany 04/04

INDUSTRIAL AUTOMATION

HEADQUARTERS

MITSUBISHI ELECTRIC EUROPEEUROPE B.V.German BranchGothaer Straße 8D-40880 RatingenPhone: +49 (0) 2102 / 486-0Fax: +49 (0) 2102 / 486-1120e mail: [email protected] ELECTRIC FRANCEEUROPE B.V.French Branch25, Boulevard des BouvetsF-92741 Nanterre CedexPhone: +33 1 55 68 55 68Fax: +33 1 55 68 56 85e mail: [email protected] ELECTRIC IRELANDEUROPE B.V.Irish BranchWestgate Business Park, BallymountIRL-Dublin 24Phone: +353 (0) 1 / 419 88 00Fax: +353 (0) 1 / 419 88 90e mail: [email protected] ELECTRIC ITALYEUROPE B.V.Italian BranchVia Paracelso 12I-20041 Agrate Brianza (MI)Phone: +39 039 6053 1Fax: +39 039 6053 312e mail: [email protected] ELECTRIC SPAINEUROPE B.V.Spanish BranchCarretera de Rubí 76-80E-08190 Sant Cugat del VallésPhone: +34 9 3 / 565 3131Fax: +34 9 3 / 589 2948e mail: [email protected] ELECTRIC UKEUROPE B.V.UK BranchTravellers LaneGB-Hatfield Herts. AL10 8 XBPhone: +44 (0) 1707 / 27 61 00Fax: +44 (0) 1707 / 27 86 95e mail: [email protected] ELECTRIC JAPANCORPORATIONOffice Tower “Z” 14 F8-12,1 chome, Harumi Chuo-KuTokyo 104-6212Phone: +81 3 6221 6060Fax: +81 3 6221 6075MITSUBISHI ELECTRIC USAAUTOMATION500 Corporate Woods ParkwayVernon Hills, IL 60061Phone: +1 847 / 478 21 00Fax: +1 847 / 478 22 83

MIDDLE EAST REPRESENTATIVE

TEXEL Electronics Ltd. ISRAELBox 6272IL-42160 NetanyaPhone: +972 (0) 9 / 863 08 91Fax: +972 (0) 9 / 885 24 30e mail: [email protected]

EUROPEAN REPRESENTATIVES

GEVA AUSTRIAWiener Straße 89AT-2500 BadenPhone: +43 (0) 2252 / 85 55 20Fax: +43 (0) 2252 / 488 60e mail: [email protected] BELARUSOktjabrskaya 16/5, Ap 704BY-220030 MinskPhone: +375 (0)17 / 22 75 704Fax: +375 (0)17 / 22 76 669e mail: [email protected] b.v. BELGIUMControl SystemsPontbeeklaan 43B-1731 Asse-ZellikPhone: +32 (0) 2 / 467 17 51Fax: +32 (0) 2 / 467 17 45e mail: [email protected] CO. BULGARIA4, A. Ljapchev Blvd.BG-1756 SofiaPhone: +359 (0) 2 / 97 44 05 8Fax: +359 (0) 2 / 97 44 06 1e mail: —INEA CR d.o.o. CROATIADrvinje 63HR-10000 ZagrebPhone: +385 (0) 1 / 36 67 140Fax: +385 (0) 1 / 36 67 140e mail: —AutoCont CZECH REPUBLICControl Systems s.r.o.Nemocnicni 12CZ-702 00 Ostrava 2Phone: +420 59 / 6152 111Fax: +420 59 / 6152 562e mail: [email protected] poulsen DENMARKindustri & automationGeminivej 32DK-2670 GrevePhone: +45 (0) 70 / 10 15 35Fax: +45 (0) 43 / 95 95 91e mail: [email protected] Elektrotehnika AS ESTONIAPärnu mnt.160iEE-11317 TallinnPhone: +372 (0) 6 / 51 72 80Fax: +372 (0) 6 / 51 72 88e mail: [email protected] Electronics OY FINLANDAnsatie 6aFIN-01740 VantaaPhone: +358 (0) 9 / 886 77 500Fax: +358 (0) 9 / 886 77 555e mail: [email protected] A.B.E.E. GREECE5, Mavrogenous Str.GR-18542 PiraeusPhone: +302 (0) 10 / 42 10 050Fax: +302 (0) 10 / 42 12 033e mail: [email protected] Automatika Kft. HUNGARY55, Harmat St.HU-1105 BudapestPhone: +36 (0)1 / 2605 602Fax: +36 (0)1 / 2605 602e mail: [email protected] POWEL LATVIALienes iela 28LV-1009 RigaPhone: +371 784 / 22 80Fax: +371 784 / 22 81e mail: [email protected]

EUROPEAN REPRESENTATIVES

UAB UTU POWEL LITHUANIASavanoriu pr. 187LT-2053 VilniusPhone: +370 (0) 52323-101Fax: +370 (0) 52322-980e mail: [email protected] SRL MOLDOVACuza-Voda 36/1-81MD-2061 ChisinauPhone: +373 (0)2 / 562 263Fax: +373 (0)2 / 562 263e mail: [email protected] b.v. NETHERLANDSControl SystemsDonauweg 2 BNL-1043 AJ AmsterdamPhone: +31 (0) 20 / 587 67 00Fax: +31 (0) 20 / 587 68 39e mail: [email protected] Electronics AS NORWAYTeglverksveien 1N-3002 DrammenPhone: +47 (0) 32 / 24 30 00Fax: +47 (0) 32 / 84 85 77e mail: [email protected] Technology Sp. z o.o. POLANDul. Sliczna 36PL-31-444 KrakówPhone: +48 (0) 12 / 632 28 85Fax: +48 (0) 12 / 632 47 82e mail: [email protected] Trading & Services srl ROMANIAStr. Biharia No. 67-77RO-013981 Bucuresti 1Phone: +40 (0) 21 / 201 1146Fax: +40 (0) 21 / 201 1148e mail: [email protected] d.o.o. SLOVENIAStegne 11SI-1000 LjubljanaPhone: +386 (0) 1-513 8100Fax: +386 (0) 1-513 8170e mail: [email protected] Electronics AB SWEDENBox 426S-20124 MalmöPhone: +46 (0) 40 / 35 86 00Fax: +46 (0) 40 / 35 86 02e mail: [email protected] AG SWITZERLANDPostfach 282CH-8309 NürensdorfPhone: +41 (0) 1 / 838 48 11Fax: +41 (0) 1 / 838 48 12e mail: [email protected] TURKEYDarülaceze Cad. No. 43 Kat. 2TR-80270 Okmeydani-IstanbulPhone: +90 (0) 212 / 320 1640Fax: +90 (0) 212 / 320 1649e mail: [email protected] Automation Ltd. UKRAINE15, M. Raskova St., Fl. 10, Office 1010UA-02002 KievPhone: +380 (0) 44 / 238-83-16Fax: +380 (0) 44 / 238-83-17e mail: [email protected]

EURASIAN REPRESENTATIVE

Avtomatika Sever Ltd. RUSSIALva Tolstogo St. 7, Off. 311RU-197376 St PetersburgPhone: +7 812 / 11 83 238Fax: +7 812 / 11 83 239e mail: [email protected] RUSSIAPromyshlennaya St. 42RU-198099 St PetersburgPhone: +7 812 / 325 36 53Fax: +7 812 / 147 20 55e mail: [email protected] RUSSIASystems SiberiaPartizanskaya St. 27, Office 306RU-121355 MoscowPhone: +7 095/ 416-4321Fax: +7 095/ 416-4321e mail: [email protected] RUSSIASystems SiberiaShetinkina St. 33, Office 116RU-630088 NovosibirskPhone: +7 3832 / 22-03-05Fax: +7 3832 / 22-03-05e mail: [email protected] RUSSIAul. Garschina 11RU-140070 MoscowPhone: +7 095 / 514 9316Fax: +7 095 / 514 9317e mail: [email protected] RUSSIAKrasnij Prospekt 220-1Office No. 312RU-630049 NovosibirskPhone: +7 3832 / 10 66 18Fax: +7 3832 / 10 66 26e mail: [email protected] RUSSIAIndustrial Computer Systems ZaoRyazanskij Prospekt 8a, Office 100RU-109428 MoscowPhone: +7 095 / 232 - 0207Fax: +7 095 / 232 - 0327e mail: [email protected] Uralelektra RUSSIAul. Sverdlova 11aRU-620027 EkaterinburgPhone: +7 34 32 / 53 27 45Fax: +7 34 32 / 53 27 45e mail: [email protected] Rosgidromontazh Ltd. RUSSIA23, Lesoparkovaya Str.RU-344041 Rostov On DonPhone: +7 8632 / 36 00 22Fax: +7 8632 / 36 00 26e mail: —STC Drive Technique RUSSIAul. Bajkalskaja 239, Office 2 - 23RU-664075 IrkutskPhone: +7 3952 / 24 38 16Fax: +7 3952 / 23 02 98e mail: [email protected] Drive Technique RUSSIAPoslannikov Per. 9, str.1RU-107005 MoscowPhone: +7 095 / 790-72-10Fax: +7 095 / 790-72-12e mail: [email protected]

AFRICAN REPRESENTATIVE

CBI Ltd. SOUTH AFRICAPrivate Bag 2016ZA-1600 IsandoPhone: +27 (0) 11/ 928 2000Fax: +27 (0) 11/ 392 2354e mail: [email protected]

Gothaer Strasse 8 Phone: +49 2102 486-0 Fax: +49 2102 486-7170 www.mitsubishi-automation.deD-40880 Ratingen Hotline: +49 1805 000-765 [email protected] www.mitsubishi-automation.com