technical datashet lf 120-a sep 2012
TRANSCRIPT
8/13/2019 Technical Datashet LF 120-A Sep 2012
http://slidepdf.com/reader/full/technical-datashet-lf-120-a-sep-2012 1/16
1
©
C o p y r i g h t 2 0 1 1 B o a r t L o n g y e a r . A l l r
i g h t s r e s e r v e d .
LF
™
120A SURFACE CORE DRILL (SC9)Technical Datasheet
8/13/2019 Technical Datashet LF 120-A Sep 2012
http://slidepdf.com/reader/full/technical-datashet-lf-120-a-sep-2012 2/16
2
©
C o p y r i g h t 2 0 1 1 B o a r t L o n g
y e a r . A l l r i g h t s r e s e r v e d .
* ” Q ” i s a r e g i s t e r e d t r a d e m a r k o f B o a r t L o n g y e a r .
LF™
120A SURFACE CORE DRILL
Next-Generation Drill PlatformThe LF™120A introduces a new approach to surface exploration drills. Featuring ourcompletely hands-free rod management system and CANBUS technology for self-monitoring and efcient rig operations, the LF™120A is set to become the standardfor fully-automated exploration drilling.
Rod ManagementThe Boart Longyear LF™120A surface coring rig features the safest and most ex-ible rod management system in its class, including the industry’s rst truly hands-freerod handling system* which consists of the rod handler, an auto-adjusting break-outtool and an innovative hoist plug spinner. Easily managing both 3 m and 6 m rods insizes ranging from BQ™ to PQ™, the new system delivers safe and reliable long-termoperation.
Operating SystemThe new operating system tracks rig performance down to the bit. This informationallows drillers to quickly establish optimal parameters for any site condition. Theoperating system’s main benet is to prevent unexpected events which cause down-time, so drillers can continue to operate at maximum efciency. Self-diagnosis, remotedial-up support and maintenance tracking further assist the driller in maintainingoptimum performance. All of these issues are critical to a drill’s performance,maximizing uptime and project protability.
*US Patent No. 7,849,929; ZA Patent No. 2008/08905; Patents Pending
8/13/2019 Technical Datashet LF 120-A Sep 2012
http://slidepdf.com/reader/full/technical-datashet-lf-120-a-sep-2012 3/16
3
NOISE CONTROLAcoustic enclosurecovers the engineand pump for loweroperating noiselevels.
1
ENGINEERED FOR
PRODUCTIVITYEfcient hydraulicsystem design andcomponent selection
giving power beyondits class.
2
OPEN-FACE MAST
DESIGNAll the movingparts are enclosedinside the mast and
are fully protectedby a heavy-duty,hydraulicallyoperated interlockedrotation barrier whenthe LF™120A is indrilling mode.
3
ROD MANAGEMENTCompletely hands-freerod handling system*(includes: rod handler,break-out tool, hoistplug spinner and rod
presenter).
4
PC-CONTROLLED
PRODUCTIVITYHigh-performanceindustrial PCwith eld rened
operating systemmanages everythingon the LF™120A-from fuel usage topressure on the bit-ensuring optimumproductivity.
5
1
2
3
4
5
©
C o p y r i g h t 2 0 1 1 B o a r t L o n g y e a r . A l l r
i g h t s r e s e r v e d .
*US Patent No. 7,849,929; ZA Patent No. 2008/08905; Patents Pending
8/13/2019 Technical Datashet LF 120-A Sep 2012
http://slidepdf.com/reader/full/technical-datashet-lf-120-a-sep-2012 4/16
4
The above depth capacities are based on a vertical, straight and clean down hole using actual mea-sured pull-back of 157.2 kN and hoist capacity of 92 kN.
Core breaking strength has been included using rock strength of 15 MPa.
Actual drilling capacity will depend on in-hole tool system used, ground conditions, drilling techniqueand equipment used.
C o p y r i g h t ©
2 0 1 1 B o a r t L o n g y e a r . A l l r i g h t s r e s e r v e d .
“ Q a
n d R Q
a r e r e g i s t e r e
d t r a d e m a r k s o f B o a r t L o n g y e a r .
TECHNICAL INFORMATION
Drilling Depth Guidelines
Dry Hole Fluid Filled
Drill Rod / Core BarrelHole Depth
(meters)Hole Depth
(feet)Hole Depth
(meters)Hole Depth
(feet)
BRQ™ / BQ 1 565 5,134 1 791 5,878
BRQTK / BQTK 1 970 6,463 2 133 7,000
NRQ / NQ / NQ2 1 204 3,949 1 377 4,518
NRQ V-Wall™ 1 361 4,465 1 544 5,065
HRQ / HQ 816 2,679 935 3,066
HRQ V-Wall 1 028 3,373 1 162 3,813
PHD / PQ 540 1,770 616 2,020
PHD V-Wall 735 2,413 824 2,703
Prime Mover
Metric U.S.
Standard Unit Cummins™ QSB 6.7 L, liquid cooled, turbo charged, aftercooled, diesel engine
Displacement 6.7 L 409 in3
Power (maximum) at 2,450 RPM 194 kW 260 hp
Emissions Certication CARB Tier 3 - EU Stage III CARB Tier 3 -US EPA
Prime Mover (Optional)
Standard Unit John Deere™ 6068H 6.8 L, liquid cooled, turbo charged, aftercooled, diesel engine
Displacement 6.8 L 415 in3
Power (maximum) at 2,450 RPM 206 kW 276 hp
Emissions Certication CARB Tier 3 - EU Stage III CARB Tier 3 -US EPA
All company names, brand names, trademarks and logos are the property of their respective owners.
8/13/2019 Technical Datashet LF 120-A Sep 2012
http://slidepdf.com/reader/full/technical-datashet-lf-120-a-sep-2012 5/16
5
C o p y r i g h t ©
2 0 1 1 B o a r t L o n g y
e a r . A l l r i g h t s r e s e r v e d .
Hydraulic System
Metric U.S.
Primary Pump (P1) Axial piston, electronic displacement control
Max Flow 280 L/m 75.5 gpm
Max Pressure (factory setting) 345 bar 5,000 psi
Secondary Pump (P2) Axial piston, variable displacement load sensing, pressure com-pensated with low pressure standby.
Max Flow 319 L/m 84.3 gpm
Max Pressure (factory setting) 260 bar 3,770 psi
Auxiliary Pump (P3) Axial piston, variable displacement, pressure compensated withlow pressure standby.
Max Flow 105 L/m 28 gpm
Max Pressure (factory setting) 207 bar 3,000 psi
Hydraulic Tank Capacity 378 L 100 Gal
Hydraulic Cooler Rating +55° C 131° F
Operator Interface and Machine Controls
Touch Screen 15” VGA IP68 (1024 x 768)
Operating Voltage 24 V DC
Dual Joysticks Two axis proportional with dual push buttons
Control Hardware Industrial PC
Control Protocol CAN Open JI939
Remote Access Wireless Modem
Drill Head
Type Variable Speed - High and low range
Rotation Motor Hydraulic motor - Variable speed/reversible
Head Opener Retractable - Hydraulically actuated
Top Drive (Standard) Floating spindle - 2-7/8” IF API
Drill Head Lubrication Force fed bearings, oil bath for gears
Drill Head Lubricating Oil Filtration 140 micron pressure oil lter - Independent constant ow
Torque and RPM Ratings
(Hydraulic motor at maximum/minimum displacement, prime mover at 2,200 RPM)
Speed (no load) Torque (stall)
RPM Nm ft-lb
Low Range (8.26:1) 50 - 350 4 880 - 3 185 3,600 - 2,350
High Range (2.133:1) 350 - 1,200 1 395 - 840 1,030 - 620
8/13/2019 Technical Datashet LF 120-A Sep 2012
http://slidepdf.com/reader/full/technical-datashet-lf-120-a-sep-2012 6/16
6
Draw Works
Metric U.S.
Main Line Hoist Single speed motor Hook Load (single part line) 92.0 kN 20,700 lb
Hoisting Speed 1.5 m/sec 4.9 ft/sec
Main Hoist Wire Rope 19 mm 0.75 in
Minimum Breaking Strength 381.7 kN 85,600 lb
Note: Do not use multiple part lines with the main line hoist, use single part line ONLY.
Foot Clamp Capacity PHD/HWT
Axial Holding Capacity 178 kN 40,000 lb
Opening Diameter 114.3 mm 4.50 in
Wireline Hoist
Level Wind Belt driven c/w safety clutch - dual ratio
Line Pull
Bare Drum 11 kN 2,500 lb
Full Drum 1.3 kN 293 lb
Line Speed
Full Drum (no load) 15 m/sec 49.2 ft/sec
Drum Capacity
4.8 mm (3/16”) swaged 2 133 m 7,000 ft
6 mm 1 539 m 5050 ft
Minimum Cable BreakingStrength
4.8 mm (3/16” swaged) 22.2 kN 5,000 lb
6 mm 26.7 kN 6,000 lb
Additional Information
Metric U.S.
Fuel Tank Capacity 564 L 149 gal
TECHNICAL INFORMATION
C o p y r i g h t ©
2 0 1 1 B o a r t L o n g y e a r . A l l r i g h t s r e s
e r v e d . .
8/13/2019 Technical Datashet LF 120-A Sep 2012
http://slidepdf.com/reader/full/technical-datashet-lf-120-a-sep-2012 7/16
7
Drill Mast and Feed System
Metric U.S.
Feed Stroke 4.375 m 14.4 ft
Pull Back 157.2 kN 35,872 lb
Thrust 55.8 kN 12,500 lb
Rod Pull Length 3 or 6 kN 10 or 20 ft
Drilling Angle 45° off horizontal to 90° vertical down
Mast Dump (Crowd) 2.0 m 6.6 ft
Inner-tube Length (maximum) 6.0 m 20 ft
C o p y r i g h t ©
2 0 1 1 B o a r t L o n g y e a r .
A l l r i g h t s r e s e r v e d .
“ Q a
n d R Q
a r e r e g i s t e r e d t r a d e m a r k
s o f B o a r t L o n g y e a r .
Rod Handling System
Metric U.S.
Rod Handler
Control Wireless remote controller
Capacity BQ to PQ 3 m/ 6 m
Break Out Tool (BOT)
Capacity BQ to PQ - Motor driven (gear) c/w mechanical oat
Torque 4 060 Nm 2,995 ft-lb
Top Spinner
Drive Motor D
Torque 102 Nm 75 ft-lb
Rod Presenter
Capacity (Diameter) BQ to PQ
Capacity (Length) 3 - 6 m 10 - 20 ft
Control Wireless remote control
8/13/2019 Technical Datashet LF 120-A Sep 2012
http://slidepdf.com/reader/full/technical-datashet-lf-120-a-sep-2012 8/16
8
©
C o p y r i g h t 2 0 1 1 B o a r t L o n g y e a r . A l l r
i g h t s r e s e r v e d .
8/13/2019 Technical Datashet LF 120-A Sep 2012
http://slidepdf.com/reader/full/technical-datashet-lf-120-a-sep-2012 9/16
9
©
C o p y r i g h t 2 0 1 1 B o a r t L o n g y e a r . A l l r
i g h t s r e s e r v e d .
8/13/2019 Technical Datashet LF 120-A Sep 2012
http://slidepdf.com/reader/full/technical-datashet-lf-120-a-sep-2012 10/16
10
C o p y r i g h t ©
2 0 1 1 B o a r t L o n g y e a r . A l l r i g h t s r e s e r v e d . DIMENSIONS AND WEIGHTS
Wet Weight = 16,103 kg/ 35,500 lb
Drill Transport Position - Basic Drill
Drill Transport Position - C/W Optional Jack-up Base
Wet Weight = 20,865 kg/ 46,000 lb
Note: Dimensions and weights may vary depending on options and should be checked before crating or lifting.
11435
(37' 6")
2388
(7'10")
2437
(8')
11435
(37' 6")
2436(8')
2790
(9' 2")
3453(11' 4")
1533
(5')
Jackleg Extended
8/13/2019 Technical Datashet LF 120-A Sep 2012
http://slidepdf.com/reader/full/technical-datashet-lf-120-a-sep-2012 11/16
11
C o p y r i g h t ©
2 0 1 1 B o a r t L o n g y e a r . A l l r i g h t s r e s e r v e d .
Drill Mast at 90°
Drill Transport Position C/W Optional Tatra Truck
9476
(31' 10")
11435
(37' 6")
2437
(8')
11473
(37' 8")
3841
(12' 7")
2500
(8' 2")
8/13/2019 Technical Datashet LF 120-A Sep 2012
http://slidepdf.com/reader/full/technical-datashet-lf-120-a-sep-2012 12/16
12
C o p y r i g h t ©
2 0 1 1 B o a r t L o n g y e a r . A l l r i g h t s r e s e r v e d . DIMENSIONS AND WEIGHTS
Drill C/W Optional Tatra Truck - Mast at 45°
Drill C/W Optional Tatra Truck - Mast at 90°
11435
(37' 6")
8596
(28' 2")
12174
(39' 11")
2500
(8' 2")
11435
(37' 6")
10884(35' 8.5")
2500(8' 2")
8/13/2019 Technical Datashet LF 120-A Sep 2012
http://slidepdf.com/reader/full/technical-datashet-lf-120-a-sep-2012 13/16
13
C o p y r i g h t ©
2 0 1 1 B o a r t L o n g y e a r . A l l r i g h t s r e s e r v e d .
Drill C/W Optional Crawlers, Transport Position
Drill C/W Optional Crawlers, Mast at 90°
11435
(37' 6")
2437
(8')
3441
(11' 3.5")
11435
(37' 6")
2437
(8')
9315
(30' 7")
Wet Weight = 28,171 kg/ 62,106 lb
Max Speed High Range = 6 kph Low Range = 2.2 kphGround Pressure = 0.64 - .8 kg/cm3
8/13/2019 Technical Datashet LF 120-A Sep 2012
http://slidepdf.com/reader/full/technical-datashet-lf-120-a-sep-2012 14/16
14
DIMENSIONS AND WEIGHTS
Rod Presenter - Front View
2651
(8’ 8”)
Rod Presenter - Top View
Rod Presenter - Side View
3538
(11’ 7”)
8262(27’ 1”)
C o p y r i g h t ©
2 0 1 1 B o a r t L o n g y e a r . A l l r i g h t s r e s e r v e d .
8/13/2019 Technical Datashet LF 120-A Sep 2012
http://slidepdf.com/reader/full/technical-datashet-lf-120-a-sep-2012 15/16
15
C o p y r i g h t ©
2 0 1 1 B o a r t L o n g y e a r . A l l r i g h t s r e s e r v e d .
(W11) Fluid Circulation Pump Group (Optional)
Mud Mixer Assembly (Optional)
Proportional volume control with remote pressureunloading control from operator’s control interface.
High torque low speed radial piston motor.10.6 gpm to 32 gpm @ 1000 psi.
Note: Maximum speed of the mud mixer shaft atfull ow is 2300 rpm.
748 mm
(2’ 5”)
914 mm(3’)
688 mm(2’ 3”)
1 219 mm
(4’)
381 mm
(1’ 3”)
381 mm(1’ 3”)
8/13/2019 Technical Datashet LF 120-A Sep 2012
http://slidepdf.com/reader/full/technical-datashet-lf-120-a-sep-2012 16/16
16
Genuine Q™ Wireline
Tooling
Diamond Products
C o p y r i g h t © 2 0
1 1 B o a r t L o n g y e a r . A l l R i g h t s R e s e r v e d .
www.BoartLongyear.com • ASX: BLY
MINING AND EXPLORATION DRILLING PRODUCTS
Rods and Casing
Global HeadquartersBoart Longyear10808 South River Front ParkwaySuite 600South Jordan, Utah 84095United States of [email protected]
Tel: +1 801 972 6430Fax: +1 801 977 3374
Latin America Boart LongyearLas Dalias 2900 (Macul) Santiago, 6900959, [email protected]
Tel: +56 2 520 7900 Fax: +56 2 755 0722
Canada Boart Longyear2442 South Sheridan WayMississauga, OntarioCanada L5J [email protected]
Tel: +1 905 822-7922 Fax: +1 905 822-7232
Asia Pacifc
Boart Longyear919-929 Marion RoadMitchell ParkSouth Australia [email protected]
Tel: +61 8 8375 8375Fax: +61 8 8377 0539
Europe Boart LongyearColumbusweg 85928 LC VenloThe [email protected]
Tel: +31 077 850 58 50Fax: +31 077 850 58 51
Sub-Saharan AfricaBoart LongyearCycad House, Constantia Ofce ParkCnr 14th Avenue and Hendrik Potgieter Weltevreden Park, 1709Gauteng, South [email protected]
Tel: +27 11 767 9300Fax: +27 11 767 9301
Feb 2011