technical details: emtek hardware pages.pdftechnical details: emte hardware ® 8817 w. market st.,...
TRANSCRIPT
TECHNICAL DETAILS: EMTEK HARDWARE®
FINISHES
Oil Rubbed Bronze
Satin Nickel
Polished Chrome
Stainless Steel
Modern Rectangular Escutcheon
10”
FINISHES
2” 2”
Silver Patina
Medium Bronze
Deep Burgundy
Flat Black
Arched Escutcheon
10”
1- 11/16” Crossbore
1- 11/16” Crossbore
Exterior Interior
Exterior Interior
2” 2”
TECHNICAL DETAILS: EMTEK HARDWARE®
FINISHES
Silver Patina
Medium Bronze
Deep Burgundy
Flat Black
Tuscany Escutcheon
10”
FINISHES
Silver Patina
Medium Bronze
Deep Burgundy
Flat Black
Rectangular Escutcheon
10”
1- 11/16” Crossbore
1- 11/16” Crossbore
Exterior Interior
2” 2”
Exterior Interior
2” 2”
TECHNICAL DETAILS: EMTEK HARDWARE®TECHNICAL DETAILS: EMTEK HARDWARE
LEVER OPTIONS
Medici SHOWN IN MEDIUM BRONZE
Geneva SHOWN IN OIL RUBBED BRONZE
Luzern SHOWN IN SATIN NICKEL
Mercury SHOWN IN POLISHED CHROME
Hercules* SHOWN IN OIL RUBBED BRONZE
Modern Rectangular
Hermes* SHOWN IN SATIN NICKEL
Kiel* SHOWN IN POLISHED CHROME
Sion SHOWN IN OIL RUBBED BRONZE
Posidon* SHOWN IN SATIN NICKEL
Stuttgart* SHOWN IN POLISHED CHROME
Basel SHOWN IN OIL RUBBED BRONZE
Art Nouveau SHOWN IN SILVER PATINA
Octagon SHOWN IN FLAT BLACK
Padua SHOWN IN MEDIUM BRONZE
Cody SHOWN IN FLAT BLACK
Teton SHOWN IN DEEP BURGUNDY
Durango SHOWN IN DEEP BURGUNDY
Napoli SHOWN IN DEEP BURGUNDY
Tuscany, Rectangular and Arched levers are interchangeable.
Tuscany/ Rectangular/ Arched
TECHNICAL DETAILS: EMTEK HARDWARE®
LEVER SPECIFICATIONS: MODERN RECTANGUAR
Hercules
Hermes
Kiel
Sion
Mercury
Poseidon
Stuttgart
Luzzern
Basel
Geneva
5”
1-3/8”2-3/5”
5- 13/100”
1-3/8”2-1/4”
5- 1/4””
4- 5/8”
1-1/2”
1-1/2”
2-7/50”
2-1/4”
5- 13/100”
1-3/8”2-23/50”
4- 22/25
1-3/8”2”
5- 9/32
1”2-1/8”
4- 3/4”
1-1/2”2-1/4”
4- 11/16”
1-3/4”2-3/8”
5”
1-3/4”2-7/8”
TECHNICAL DETAILS: EMTEK HARDWARE®
8817 W. Market St., Colfax, NC 272351.800.334.2006 www.enduraproducts.com
The information contained in this document is the confidential and proprietary information and trade secrets of Endura Products, Inc. Any disclosure, use or dissemination of such information without the express written permission of Endura Products, Inc. is strictly prohibited. Endura Products, Inc. also owns any and all intellectual property rights embodied in such information, including patent rights, copyrights, and trademark rights, and no license of any intellectual property right is intended, nor should any license be implied, as a result of the receipt of this document.
U.S. Patents 5,524,941; 5,524,942; 7,753,418
Rev. 1.13
LEVER SPECIFICATIONS: TUSCANY/RECTANGULAR/ARCHED
Medici
Art Nouveau
Octagon
Padua
Napoli
Durango
Teton
Cody
4- 13/16”
1-3/4”2-3/4”
4- 5/8”
1-1/2”2-1/4”
4- 3/4”
1-1/2”2-5/8”
4- 1/2”
1-1/2”2-5/8”
5”
1-3/4”3”
5”
1-3/8”2-3/4”
4- 7/8”
1-9/32”2-3/8”
4- 1/2”
1-3/8”2-1/4”