technical ref.: t4762 monorail rev. no.: sheet and monorail trolleys · 2020. 2. 13. · technical...
TRANSCRIPT
technicalsheet
monorailand monorail trolleys
ref.: T4762rev. no.:date: 09/99page: 1/4
Swingstage Division
DESCRlPTlON
For recessed or overhanging facades and access tothe inside of glazed atria such as those coveringmodern commercial centers, monorail systems areoften the best practical solution.
Monorails closely follow the line of the facade, withplatforms suspended from manual or poweredtrolleys, reaching the various points of the facade orceiling. Monorails can support powered platforms,work cages, travelling ladders and gantries.
4 in.(102mm)
4 in
.(1
02 m
m)
SteelConstruction,Primed or Galvanized Finish
1. Monorail Sections
4 in.(102mm)
3-3
/4 in
.(9
4 m
m)
Aluminum Profile,Mill Finish
2. Monorail Trolley
1-1/4 in. CENTERED(32 mm)
1-1/4 in. CENTERED(32 mm)
GUIDE ROLLERS
TRAVERSINGROLLERS
LOCKINGDEVICE
PRIMARY SUSPENSION POINT
SAFETY SUSPENSION POINT
SteelConstruction,Cadmium Plate Finish
1000 lbs (455 kg)Cadmium Plate Finish
Ltd.
technicalsheet
monorailand monorail trolleys
ref.: T4762rev. no.:date: 09/99page: 2/4
Swingstage Division
Ltd.
4. Monorail spans
Monorail Spans max. distance
type between supports
Aluminum Monorail 5.0 ft. (1.5 m)
Mild steel Monorail 10.0 ft. (3.0 m)
Span is based on 1000 lbs (455 kg) applied loading.Typical Steel Monorail Layout
Reflected Plan
Monorail Turntable
Monorail Hanger Bracket
10’0”(3048)
10’0
”(3
048)
MONORAIL HANGERC/W FASTENERS
SHIMS AS REQUIRED FORVERTICAL ADJUSTMENT
MONORAIL TRACKC/W FASTENERS
ALIGNMENT CHANNEL
MUST BE TRUE & LEVEL
6 in.(150mm)
3 in.(75mm)
3 in.(75mm)
1/8 in. max.(3 mm)
MAXIMUM SERVICE LOAD1000 lbs. (455 kg)
3. Monorail hanger bracket assembly
10’0”(3048)
10’0
”(3
048)
10’0
”(3
048)
10’0
”(3
048)
10’0”(3048)
Ltd.
STRUCTURAL SUPPORTSTEEL BY OTHERS
technicalsheet
monorailand monorail trolleys
ref.: T4762rev. no.:date: 09/99page: 3/4
Swingstage Division
Ltd.
5. Monorail Turntable Assembly
Turntables are the preferred method ofnegotiating corners along monorail systems.Radial corners are not recommended.
ROTATINGMONORAILSECTION
SPRING LOADED LOCK/TURNING HANDLE
FIXED TOSTRUCTURE
TYPICAL MONORAIL TURNTABLE SECTION
FIXEDMONORAIL(TYP.)
FIXEDMONORAIL
TWO-WAY TURNTABLE PLAN FOUR-WAY TURNTABLE PLAN
SPRING LOADED LOCK/TURNING HANDLE
SPRING LOADED LOCK/TURNING HANDLE
FIXEDMONORAIL(TYP.)
Ltd.
technicalsheet
monorailand monorail trolleys
ref.: T4762rev. no.:date: 06/99page: 4/4
Swingstage Division
Ltd.
5. Typical Intermediate Corner & End Details
END STOP
MONORAIL TRACKGALVANIZED STEEL
EXISTING BEAMCLAMP
SHIM PLATESAS REQUIRED
PULLER ASSEMBLYCADMIUM PLATED
MONORAIL TROLLEYCADMIUM PLATED
Ltd.
Example of Monorail used to suspend a TRACMOD Powered Platform– Caesar’s Place, Las Vegas
END STOP