technical speciï¬cations – isuzu d-maxisuzuutestreaming.s3.?single...

Technical Speciï¬cations – Isuzu D-MAXisuzuutestreaming.s3.?Single Cab/Chassis Crew Ute Low-Ride Crew Ute High-Ride Crew Ute Single Cab/Chassis Single Cab/Chassis Space
Technical Speciï¬cations – Isuzu D-MAXisuzuutestreaming.s3.?Single Cab/Chassis Crew Ute Low-Ride Crew Ute High-Ride Crew Ute Single Cab/Chassis Single Cab/Chassis Space
Technical Speciï¬cations – Isuzu D-MAXisuzuutestreaming.s3.?Single Cab/Chassis Crew Ute Low-Ride Crew Ute High-Ride Crew Ute Single Cab/Chassis Single Cab/Chassis Space
Download Technical Speciï¬cations – Isuzu D-MAXisuzuutestreaming.s3.?Single Cab/Chassis Crew Ute Low-Ride Crew Ute High-Ride Crew Ute Single Cab/Chassis Single Cab/Chassis Space

Post on 22-Mar-2018

219 views

Category:

Documents

5 download

Embed Size (px)

TRANSCRIPT

  • Technical Specifications Isuzu D-MAX

    Combined 7.98.19.0 8.49.0

    8.18.18.18.48.49.0 8.49.0

    Urban10.410.010.9 10.510.9

    10.010.010.010.510.510.9 10.510.9

    Extra Urban 6.57.07.9 7.27.9

    7.07.07.07.27.27.9 7.27.9

    CO2 (g/km) Combined208213237 222237

    213213213222222237 222237

    Manual4.326 2.557 1.490 1.000 0.790 3.942

    3.4163.7273.727

    2.4821.000

    Automatic2.8041.5321.0000.705

    2.394

    4.1004.1004.100

    2.4821.000

    Engine

    Series: Isuzu 4JJ1-TC Hi-Power

    Description: 3.0 litre turbo-diesel, in-line 4-cylinder, DOHC, 16-valve

    Maximum torque: 360 Nm @ 1800 > 2800 rpm (manual) 333 Nm @ 1600 > 3200 rpm (automatic)

    Maximum power: 120 kW @ 3600 rpm

    Bore x stroke: 95.4 mm x 104.9 mm

    Displacement: 2999 cc

    Compression ratio: 17.5 : 1

    Cylinder head: Isuzu-patent special aluminium alloy with double-walled water jacketing

    Valve gear: Chain-driven dual overhead camshafts, roller rockers, 4 valves/cylinder

    Induction: Electronic ultra high pressure direct fuel injection with VSS (Variable Swirl System) via common rail & intercooled VGS (Variable Geometry System) turbo

    Cylinder block: Cast iron upper w/induction-hardened cylinder bores, cast alloy lower; special pistons with nickel composite oil rings

    Emission level: Euro 4

    Alternator: 90 amp

    Transmissions

    Manual: Isuzu MUX 5-speed manual with high torque capacity & output reduction. 275mm diameter clutch plate.

    Automatic: Maximatic III electronically controlled, tri-mode with Adaptive Grade Logic Control & fuel-saving lock-up torque converter on gears 2, 3 & 4 Adaptive Grade Logic Control: holds gear 3 in varied-gradient ascents,selects 3 on steep descents to hold speed w/engine braking Power Mode (changes up at higher revs/power) & 3rd Mode (starts in 3rd gear to avoid wheelspin on ice/snow/slippery road) Ratios:1: 1st 2nd 3rd 4th 5th Reverse Final drive: 4x2 SX LS 4x4 Limited slip rear differential all models. Snorkelled diff breathers to increase fording depth & reduce mud blockage Transfer Gearing: 4x4 low range 4x4 high range 4x4 system: Dash-mounted push button mode selection, including shift on the fly

    gear low range with stall-saver for idle speed crawl & max engine-braking on steep descent

    Chassis

    Frame: Separate, full-length heavy-duty truck chassis with 7 cross members (8 on 4x4 & 4x2 Hi-Ride models) including rear rails K-brace

    Extra-long wheelbase (3200mm) for cab/chassis Suspension Front: 4x2 SX manual: Independent, coil springs, double-acting gas shock absorbers, upper & lower wishbones, stabilizer bar Other: Independent, hi-rise torsion bars, double-acting gas shock absorbers, upper & lower wishbones, stabilizer bar Suspension Rear: Alloy-steel underslung semi-elliptic leaf springs, heavy-duty on cab/chassis;

    High-Ride on 4x4, LS 4x2, SX 4x2 auto crew ute; gas shock absorbers Axles

    Front: Independent. 4x4: fully floating with outer constant velocity & inner double offset joints. Equal length driveshafts. Ratings: 4x2: 1200kg; 4x4: 1300kg

    Rear: Rigid semi-floating banjo with hypoid final drive. Limited slip differential

    all models. Dual tapered needle roller bearings. Rating: 1680kg

    Steering

    Engine-speed-sensitive power-assisted rack & pinion system; 3.2 turns lock-to-lock via (n/a on EX) tilt-adjustable wheel.

    Brakes

    Power-assisted via tandem 9+ 8 servo unit; 280mm dia ventilated front discs with 2-pot calipers, 295mm rear drums

    ABS with EBD (Anti-skid Brake System with Electronic Brakeforce Distribution) & steep slope disabling (n/a on EX)

    Central pull up park brake (under-dash pull out type on EX/bench seat model) Wheels & Tyres

    4x2 SX manual 15x 6.5 drilled silver-finish steel; 215/70 R15 LT 4x2 SX High-Ride 16x 7 drilled silver-finish steel; 245/70 R16 LT 4x4 EX,SX. 16x7 drilled silver-finish steel; 245/70 R16 LT LS, LS-M, LS-U 16x7 alloy (including spare); 245/70 R16 Warranty

    3 years or 100,000km, which ever occurs first. Isuzu UTE Extended Warranty available at extra cost.

    Fuel use @ ADR81/02* (litres/100km)

    4x2 SX Single Cab/chassis manual 4x2 SX Crew Cab Ute manual (Low-Ride) 4x2 SX Crew Cab Ute auto (High-Ride) 4x2 LS Crew Cab Ute manual 4x2 LS Crew Cab Ute auto 4x4 EX Single Cab/chassis manual 4x4 SX Single Cab/chassis manual 4x4 SX Space Cab/chassis manual 4x4 SX Crew Cab/chassis manual4x4 SX Crew Ute manual 4x4 SX Crew Ute auto 4x4 LS-U/LS-M Crew Ute manual 4x4 LS-U/LS-M Crew Ute auto

    *ADR 81/02 is the federal governments standard laboratory based test regime. Your fuel figures will depend on driving style, conditions of usage,vehicle condition and load, and other factors.

    It is intended that all technical specifications be read in conjunction with the current Isuzu D-MAX brochure. Isuzu UTE Australia Pty Ltd reserves the right to change specifications and features at any time. Printed Feb 2011

  • Sing

    le

    Cab/

    Chas

    sisCr

    ew U

    te

    Low

    -Rid

    eCr

    ew U

    te

    High

    -Rid

    eCr

    ew U

    te

    Sing

    le

    Cab/

    Chas

    sisSi

    ngle

    Ca

    b/Ch

    assis

    Spac

    eCa

    b/Ch

    assis

    Crew

    Cab/

    Chas

    sisCr

    ew U

    teCr

    ew U

    teCr

    ew U

    te

    MODEL SX SX SX LS EX SX SX SX SX LS-M LS-U FEATURES Cont.

    In-Cabin Storage* Glovebox with light & key lock (*no light or lock)

    Centre floor console w/2 cup holders, bi-level bin w/padded flip-top armrest* Centre floor console w/2 cup holders & deep bin *+2 cup holders in rear

    Centre front floor console w/2 cup holdersIn-dash recess under audio unitCard/small storage drawer in upper central dashPockets on backs of front seat backrestsOverhead console with twin map lights & flip-down sunglasses caseFront door map pockets with bottle bulgesTwo coat hooksFlat load platform with tool storage under rear flip up seatsSafety & SecurityABS (Anti-skid Brake System) with EBD (Electronic Brakeforce Distribution)Dual front airbags with internal tethers to optimize bag shape when inflatedHeight-adjustable upper mounts for front outer seat belts (& rear outer in crew cabs)Pre-tensioners for front outer seatbelts (from Aug 2010 build)3-point retractable seat belts for all seating positions including centre rear; all auto ratcheting except drivers and Space Cab rear3 child seat top tether strap anchorages for rear seat, on rear cabin wallHeight-adjustable head restraints for all outboard full-size seatsAnti-submarining front seat cushion steel pansChild-proof rear door locksTandem 9+ 8 servo brake master cylindersHeavy-duty brakes: 280mm ventilated front discs w/twin-pot calipers, 295mm rear drumsControlled impact deformation-rate front end protecting rigid cabin cellCollapsible-section steering column protecting rigid cabin cellFront wheel anti-intrusion chassis rail extensions protecting front footwellsSide anti-intrusion bars inside all doorsEngine immobilizerWarning alarm: headlights or parking lights on with ignition key removedRear window demisterHDPE (High Density Polyethylene) fuel tankIn-cabin remote fuel filler flap openerLoad-sensitive front-to-rear brake proportioning valve High mounted brake light array on cab top rearProtectionUnder-front steel plate skid/splash shieldSteel plate guards: sump, transfer case, fuel tank leading edge; sheet steel over fuel tankBodyside protection mouldingsDimensions (mm unless stated otherwise)

    3200 3050 3050 3050 3200 3200 3200 3200 3050 3050 3050 Wheelbase5025* 4925 4925 5030 5025* 5025* 5025~ 4905^ 4925 5030 5030 Overall length (5310* /5330~/5175^ with endorsed accessory aluminium tray body fitted)1720* 1720 1800 1800 1800* 1800* 1800* 1800* 1800 1800 1800 Overall width excl.door mirrors (*1842 with endorsed accessory aluminium tray body fitted)1635* 1660 1750 1735 1725* 1725* 1730* 1735* 1750 1750 1735 Overall height (*excluding tray or other special body fitted)

    770 770 770 770 770 770 770 770 770 770 770 Front overhang1460 1460 1520 1520 1520 1520 1520 1520 1520 1520 1520 Front track1460 1460 1525 1525 1525 1525 1525 1525 1525 1525 1525 Rear track195 195 225 225 225 225 225 225 225 225 225 Ground clearance - minimum320 320 360 360 360 360 360 360 360 360 360 Wading depth: standing450 450 600 600 600 600 600 600 600 600 600 Wading depth: at 14 km/h for 4x2, at 8 km/h for 4x412.4 11.8 12 12 13 13 13 13 12.2 12.2 12.2 Turning circle diameter between kerbs (metres)NA NA 34.6 34.6 34.6 34.6 34.6 34.6 34.6 34.6 34.6 Approach angleNA NA 25.8 23.3 NA NA NA NA 25.8 23.3 23.3 Departure angleNA NA NA 21.0 NA NA NA NA 20.5 21.0 21.0 Ramp-over angle76 76 76 76 76 76 76 76 76 76 76 Fuel tank capacity (litres)

    Load Area1340 NA NA NA 1340 1340 870 575 NA NA NA Cab to rear axle

    1055* 1105 1105 1210 1055* 1055* 1055* 935* 1105 1210 1210 Rear overhang (*without rear body fitted)2550* 1375 1375 1380 2550* 2550* 2100* 1650 1375 1375 1380 Length (*inside endorsed accessory tray body)1795* 1530 1530 1530 1795* 1795* 1795* 1795* 1530 1530 1530 Maximu

Recommended

View more >