technicalmanual forordering andinstallation dorma ma net€¦ · sliding pivoting retention. dorma...
TRANSCRIPT
DORMA
Technical manualfor orderingand installation
MANETSingle-point fixingsfor interior applications
Product discription4 – 5
MANETCONCEPT6 – 37
MANETCOMPACT Sets38 – 49
MANETAMBIENT50 – 65
Installation tools /Accessories
66 – 70
4 10/07
DORMA MANET Glass design system
Today’s approach to officedesign tends to be generouslyappointed, open-plan layouts.One of the basic underlyingprinciples in this regard isthat, in order to be effectivein business, you need a clearview of everything that ishappening.Consequently, flexible glasspartitions and doors are be-coming the preferred solutionfor internal spatial division.Thanks to the flexible modu-larity of the system, DORMAMANET offers architects andspecifiers a free hand increative almost bespokedesign with space, visionand light as a foundation.The basic component is thesingle-point fixing which iscountersunk into the glassand provides for a perfectlyflush finish in all applications.In addition to the counter-sunk version, however, thesystem now also offers a new
alternative, i.e. whereby thesingle-point fixing is clam-ped to the glass surface.When using these mountingelements, glazing systems of8 mm thickness as well asthe usual 10 and 12 mmthicknesses are available asstandard applications forsliding doors. Other glassthicknesses may also beavailable, and the installati-on of timber doors is like-wise possible. Design modi-fications enable the freecombination of various rollercarrier and track rail types.Further details can be foundin the relevant introductorypages.Adjustable angle connectorsprovide for reliable attach-ment to existing structuralcomponents or glass-to-glasscombinations, with integra-ted pivoting and sliding doorelements complimenting thesystem.
Just as visually effective arethe MANET COMPACT stan-dardised sets from theDORMA MANET family.These facilitate single, fastplanning of the more popu-lar system types with 8, 10or 12 mm glass for doorsand 10 and 12 mm glass foroverpanels and sidelights.The MANET COMPACT sli-ding door sets will be deli-vered with roller carrier inCLASSIC design.
Optional accessories areavailable for increaseddesign variety within theindividual sets.
The system componentscome with numerous adjust-ment possibilities in order toensure problem-free installa-tion of the sliding, doubleaction or single action doors.Wall abutment profiles /connectors (for attachingthe overpanel and sidelightscreens to the existingstructure) may need to beprovided.
MANET CONCEPT MANET COMPACT Sets
11/06 5
All the elements includingthe pull handles are availablein an elegant stainless steelfinish (AISI 303).In applications involvingcorrosive atmospheres, manyfittings are also available instainless steel AISI 316L.
Needless to say, all DORMAsystems are protected byproprietary rights worldwide.We will be glad to provide youwith information concerningrelevant patents, e.g.PCT/EP03/04299,PCT/EP01/04255 etc. onapplication.
The remarkableMANET AMBIENT range ofhardware breathes new lifeinto furniture creations.Sliding, pivoting, retention– this system transforms thefunctional into the stylish,affording the designeralmost unlimited scope forcreativity. Exacting in termsof its concept andengineering excellence, thishardware system is quiteunique in a number ofways - not least because thestainless steel fittings arenot concealed, servinginstead to accentuate excep-tional furniture design.The MANET AMBIENTsystem approach is alsoreflected in the minimalnumber of basic compo-nents incorporated in theoverall range.
At the heart of the systemis the rod - the connectingelement that also functionsas a support, track rail orpivot. Shelf supports andsingle-point fixings(flush-mounted in the glass)are further components inthis kit system with itsunique fitting methods,application range andmodularity.MANET AMBIENT is theideal aesthetic partner notonly to glass surfaces butalso to fine wood carcassfurniture - in offices, foyers,kitchens, living rooms andbedrooms. Hardly surpri-sing, then, that this indu-strial-quality product rangeis encountered not only inthe project hardware spherebut also, increasingly, inprivate homes as well.
Awarded with the design prizered dot 2002
MANET AMBIENT
SlidingPivotingRetention
DORMA MANET CONCEPT
Content
Single-point fixing 8
Connection system 10
Pivoting door system 14
Sliding door system 22
Pull handles/door knobs 34
MANETCONCEPT
8 11/06
Threaded rod M8 withsmall head (eg DIN 6912).Length and type to suitwallplug.
3-dimensionaladjustment
1
23
Wallplug on site tosuit wall construction.
Installation and adjustment
Transfer the drillingpoints from the installationdrawing to the wall.Drill anchor holes for wallplugs.Undo adjustment fastenerand secure to the wall.Only lightly tighten fastenerso that it can still bemoved.Mount the fixing andwasher and fit the glass.Undo the adjustmentfastener and then secure infinal position.Align single-point fixingsand secure with grub screw.Fit tapered nut and clam-ping ring and tighten withspecial wrench (tighteningtorque 15 Nm).Clip on covers.
45
6
Post-installation adjustmentof ± 2 mm horizontally andvertically by rotatingthe oblong hole.
Aperture forpost-installationadjustment of screw
Adjustment screwallows offset fromwall to be altereddepending on typeof fitting.
1 Clip-on cover
2 Pin internal thread
3 Conical sleeve
4 Gasket
5 Fixing
6 Adjustment screw
Components
MANET CONCEPT Single-point fixing
The basic component withinthe MANET system is thesingle-point fixing. Ratherthan cylindrical bore in theglass, this has a taperedcountersunk bore for a perfectseated fit to the glass. Thesegive a flush finish of thesingle-point fixing in all appli-cations.The three-dimensional adjus-tability incorporated withinthe fitting ensures ideal com-pensation for structural anddrilling tolerances.Constraint-free transmissionof all the forces acting on theglass to the substructure isalso ensured.
Single-point fixing series S32/35
Type and ordering information
Single-point fixing,Glass/WallGlass/Wall offsetadjustable 8.5 -11.5 mm
Complete fitting
Glass thickness 10 mm:Art. No. 8.29.200.700.99
Glass thickness 12 mm:Art. No. 8.29.210.700.99
Glass thickness 13.5 mm:Art. No. 8.29.240.700.99
Glass thickness 15 mm:Art. No. 8.29.244.700.99
Glass thickness 17.5 mm:Art. No. 8.29.248.700.99
Ø32
Ø35
Single-point fixing,Glass/WallGlass/Wall offsetadjustable 11.5 -14.5 mm
Complete fitting
Glass thickness 10 mm:Art. No. 8.29.201.700.99
Glass thickness 12 mm:Art. No. 8.29.211.700.99
Glass thickness 13.5 mm:Art. No. 8.29.241.700.99
Glass thickness 15 mm:Art. No. 8.29.245.700.99
Glass thickness 17.5 mm:Art. No. 8.29.249.700.99
Single-point fixing,Glass/WallGlass/Wall offsetadjustable 14.5 - 22 mm
Complete fitting
Glass thickness 10 mm:Art. No. 8.29.202.700.99
Glass thickness 12 mm:Art. No. 8.29.212.700.99
Glass thickness 13.5 mm:Art. No. 8.29.242.700.99
Glass thickness 15 mm:Art. No. 8.29.246.700.99
Glass thickness 17.5 mm:Art. No. 8.29.250.700.99
Single-point fixing,Glass/WallGlass/Wall offset 6 mmnot adjustable
Complete fitting
Glass thickness 10 mm:Art. No. 8.29.205.700.99
Glass thickness 12 mm:Art. No. 8.29.215.700.99
Glass thickness 13.5 mm:Art. No. 8.29.243.700.99
Glass thickness 15 mm:Art. No. 8.29.247.700.99
Glass thickness 17.5 mm:Art. No. 8.29.251.700.99
adjustable
Glass-thickness
Glass-thickness
Glass-thickness8.5-11.5
Ø32
Ø35
adjustable
11.5-14.5
Ø32
Ø35
adjustable
14.5-22
Ø32
Ø35
6
notadjustable
Glass-thickness
11/06 911/06 9
10 11/06
MANET CONCEPT Connection system
The system approach is verymuch in evidence in the caseof the interconnecting com-ponents. Elements such asclamping and angle connec-tors of various designs andalso interconnecting fastenersof various lengths can becombined in order to attachglass of different thicknessesat any required angle to thefloor, to ceilings, to walls andto plinth supports.Single-point fixings flushwith the glass are also usedfor this interconnection andglass-to-glass system.Tolerances are compensatedby sloted holes in the inter-connecting fasteners.
1 2
3 4
3ColumnCeiling/floor fixingArt. No. 8.21.146.700.99
4Clamping connectorGlass thickness 8 -12 mmArt. No. 8.29.149.700.99
5Connecting rod
Length 52.5 mmArt. No. 8.21.301.002.40
Length 60 mmArt. No. 8.21.301.004.40
Length 82 mmArt. No. 8.21.301.003.40
Length 103 mmArt. No. 8.21.301.005.40
103 mm
82 mm
60 mm
52.5 mm
5
Ordering information
1Pivoting glass clampGlass thickness 8-12 mmArt. No. 8.29.160.700.99
Glass thickn. 13.5-17.5 mmArt. No. 8.29.162.700.99
Glass thickn.17.5-21.5 mmArt. No. 8.29.163.700.99
2Pivoting wall fixingArt. No. 8.21.141.700.99
Connection system
11/06 11
6
adjustable viaoblong hole
1 2
5
87Components and assemblyof the glass fixing
3 4
1 Clip-on cover2 Connecting bolt3 Conical collar4 Conical sleeve5 Gasket6 Pivoting clamp7 Connecting bolt8 Connecting rodto suit length
9 Connecting bolt10 Pivoting clamp11 Fixing plate
Ordering information
Complete fitting glass/glass8-12 mm glass thickness
With connecting rod52.5 mmArt. No.8.29.120.700.99
With connecting rod60 mmArt. No.8.29.122.700.99
With connecting rod82 mmArt. No. 8.29.125.700.99
With connecting rod103 mmArt. No. 8.29.130.700.99
A
A
A
Connecting rod
52.5 / 60 / 82 / 103 mm
ø20
28ø36
ø32
Glass thickness
Glassthickness
Components
Complete fittingglass /wall8-12 mm glass thickness
With connecting rod52.5mmArt. No. 8.29.139.700.99
With connecting rod60 mmArt. No. 8.29.140.700.99
With connecting rod82 mmArt. No. 8.29.142.700.99
B
C
B
B
Connecting rod52.5 / 60 / 82 mm
Connecting rodsee page 10
Connectingrodsee page 10
Components and assemblyof the wall fixing
Threaded rod M8 withsmall head(e.g. DIN 6912).Length and type to suitwallplug.
adjustable viaoblong hole
grub screw
2-dimensionaladjustment
Wallplug on site to suitwall construction.
ø20
ø36
32.5
9
10 11
8
Wall
90°-180°Glass/Wall
Glass/Glass
Connector for double panel
Glass/Wall
90°-180°Glass/Glass
C
C
120
3
Glass Glass
ø32
Complete fittingConnectorfor glass thickness8 -12 mm
AISI 303Art. No. 8.29.148.700.99
AISI 316LArt. No. 8.29.368.700.99
Glass thickness
Connection system
12 11/06
MANET CONCEPT Connection system
Ordering information
AClamping connector
Complete fittingGlass thickness 8 -12 mmArt. No. 8.29.149.700.99
BCorner connector 90°Glass/ceiling, Glass/floorconnection
Complete fittingGlass thickness 8 -12 mm(only supporting function)Art. No. 8.29.145.700.99
CCeiling fixing(bearing function)
Complete fittingGlass thickness 8 -12 mmcountersunkArt. No. 8.29.337.700.99
clamping discArt. No. 8.29.338.700.99
1Connecting bolt
2Pivoting clamp
3Connecting bolt
4Gasket
5Pivoting clamp
6Fixing plate
7Column
A
A
B
B
C
C
28 28
ø36
ø20
Components / Installation
adjustable viaoblong hole
1 2
3 4
4 5
Connecting rodor steel cable
6
7
2-dimensionaladjustment
Grub screw
Hanging glass fromthe ceiling is permis-sible where there isother support for theglass sheet.
Wallplug onsite to suitwall con-struction.
Threaded rodM8 with small head(eg DIN 6912).Length and type tosuit wallplug.
Components
Fixing with cheeseheadscrewDIN 7984 M10 x...,oroval-head wood screwDIN 7996 M8 x...depending on ceilingfixing requirements andwallplug type(by others)
Height adjust-mentvia grub screw
with clampingdisc
Single-pointcountersunk
Single-point fixingclamping disc
Single-point fixingcountersunk
Clip-on cover
Connection system
11/06 13
Dimensions in mm
Glass preparationwith a tolerance ofmax. ± 0.3 mmis recommended.
Ensure compliancewith minimum glass/boreclearances as per glassmanufacturer recommenda-tions
±0.3
Glassthickness
For ESG and VSG out of ESG.
Clamping connector
Corner connectorsGlass/Glass
Glass/Wall
max.800
±0.3
max. 800 ±0.3
90°
3
3
DimensionA
DimensionA
Dimension B
Dimension B
Connecting rod
Connecting rod
90°95°100°105°110°115°120°125°130°135°180°
Angle A/B
52.5
A/B
60
A/B
82 103
Length ofConnecting rod
75706662595552494744
80757167636056545148
96908581777369666360
A/B
50
Dimensions for 10 mm glassthickness (consider variantsfor other glass thicknesses).
90°Angle A/B
52.5
A/B
60
A/B
82
Length ofConnecting rod
67/65 72/70 87.5/86
Dimensions for 10 mm glassthickness (consider variantsfor other glass thicknesses).
Plan view
Angle
150
60
28
28
28
28
32.5
28
3
72
Countersunk borefor countersunk single-pointfixings
Recommended centres forfixed glazing element
Cylindrical borefor clamping discsingle-point fixings
Cylindricalbore
Glass preparation for single-point fixings and corner connections
Corner connector glass/ceiling Corner connector glass/floor
Corner connectorsGlass/Glass 90° -180°
Corner connectorsGlass/Wall 90 -180°
Ceiling fixing (bearing)
90°
ø 32+0.2
ø 26
Glassthickness
ø 26+0.2
Ø15
28
3
AngleDimensionA
Dimension B
Wall
75
28
75
KS
Floor
Ceiling 41.5
Glass thickness
Verticallyadjustment± 2.5
65
72
3
5
Ceiling
67
Connecting rod
3- 0.2
MANET CONCEPT Pivoting door system
MANET pivoting doors can beinstalled in both glass partiti-ons and masonry openings.They come as both single anddouble-action swing doors witha maximum weight of 100 kgand a maximum leaf width of1200 mm.All the single-point fixings aredesigned for clip-on covers foreasier installation. Other com-ponents include the bottompivot bearing, top pivot fittingswith bearing spigot or eccen-tric bushing and also overpa-nel/sidelight connectors.As a result, there are almostunlimited possibilities for inte-grating frameless swing doorsboth in masonry openings –with or without overpanels and
sidelights – and in glass parti-tion constructions retained bysingle-point fixings.The pivoting door system hasundergone a number of impro-vements. Whether with a full-length pivot rod or a pair ofshorter pivot rods, the topbearing socket is now locatedin the fitting on the door leaf.This means that connection tothe ceiling, lintel or transomcan now be provided in theform of the standard PT25 toppivot spigot from the DORMArange.The door assemblies can beequipped with floor springssuch as the DORMA BTS 75V,and corner locks are naturallyalso available.
Pivoting door system
Pivot bearing withpivot rod pairshort type withintermediate tube
Pivot bearing withpivot rod pairshort type
Pivot bearing withfull-length pivot rod
14 03/07
07/07 15
Components for pivoting door system
A Overpanel/sidelight connector
complete fittingfor 10/12 mm glassArt. No. 8.29.330.700.99AISI 316LArt. No. 8.29.362.700.99
B Pivot fittingfor overpanel
Art. No. 8.21.310.700.99AISI 316LArt. No. 8.21.350.700.99
C Pivot rod,drilled, fixed lengthArt. No. 8.21.300.700.99AISI 316LArt. No. 8.21.340.700.99
Single-point fixing,countersunk, fixed 1
for 10/12 mm glassArt. No. 8.29.460.700.99AISI 316LArt. No. 8.29.461.700.99
for 13.5 -15.5 mm glassArt. No. 8.29.450.700.99
Single-point fixing,countersunk, centring2for 10/12 mm glassArt. No. 8.29.462.700.99AISI 316LArt. No. 8.29.463.700.99for 13.5 -15.5 mm glassArt. No. 8.29.455.700.99
Pivot rod set,short typetop/bottom,incl. 4 single-point fixingsArt. No. 8.29.302.700.99AISI 316LArt. No. 8.29.342.700.99ditto for intermediate tubeArt. No. 8.29.303.700.99AISI 316LArt. No. 8.29.343.700.99
Intermediate tubefixed length up to 2 mArt. No. 8.21.305.700.99AISI 316LArt. No. 8.21.345.700.99
Stock length 1.923 mmArt. No. 8.21.304.700.99AISI 316LArt. No. 8.21.344.700.99
D Pivot bearing forDORMA BTS/floor pivotArt. No. 8.21.311.700.99AISI 316LArt. No. 8.21.351.700.99
Ordering informationGlassthickness
Glassthickness
115
76
18.5
18.5
A
B
C
1
2
2
2
D
83
89
76
18.5
18.5
ø 25
ø32
ø32
intermediatetube
Components for pivoting door system
Ordering information
PT 25 top pivotfor ceiling connection,15 mm Ø, with plugArt. No. 8.01.115.000.99
Pivot bearing for RTSArt. No. 8.21.314.700.99
Pivot bearing locationfor overpanelfor 8 -12 mm glass,Art. No. 8.29.333.700.99AISI 316LArt. No. 8.29.353.700.99
Pivot bearing forinstallation to ceilingadjustablefor 8 -12 mm glass,AISI 316LArt. No. 8.21.318.700.99
Pivot bearing fittingfor overpanel withcylindrical bore for rodfor 8 -12 mm glass,Art. No. 8.29.354.700.99
Ordering information
Glassthickness
Glassthickness
115
60
ø25
40
18.5
Glassthickness
115
18.5
M8
MANET CONCEPT Pivoting door system
46
3
105
76
16 11/06
Floor pivotArt. No. 8.01.106.700.99
Pivot bearing for wet roomsArt. No. 8.21.540.700.99
32.5
15
92
76
18.5
76
18.5
11/06 17
Components for pivoting door system
Overpanel/sidelightconnector for glass fixing90° offset,with pivot bearing location,complete fittingfor 10 and 12 mm glass,A right handArt. No. 8.29.331.700.99B left handArt. No. 8.29.332.700.99
Overpanel/sidelightconnector for wall fixing90° offset,with pivot bearing location,complete fittingfor 10 and 12 mm glass,C right handArt. No. 8.29.328.700.99D left handArt. No. 8.29.329.700.99
Overpanel/sidelightconnector for wall fixing90° offset,complete fittingfor 10 and 12 mm glass,E right handArt. No. 8.29.326.700.99F left handArt. No. 8.29.327.700.99
Ordering information
A C
A B
C D
E F
E
F B
D
Glassthickness
120
120
120
73 73.5
73.5
73.5
73.5
115
70 70 703
73
7033
18.5
18.5
3 70 703 3
Components for pivoting door system
Ordering information
Stop for pivoting doorwith ceiling mountingArt. No. 8.21.334.700.99
Stop at overpanel(inside/outside)for 10 and 12 mm glass,Art. No. 8.29.335.700.99
Ordering information
Ceiling
5
40
73 40
39
30
30
MANET CONCEPT Pivoting door system
18 11/06
Glass-thickness
Glass-thickness
120
40
3
Glass-thickness
120
40
3
Glass-thickness
120
40
3
Overpanel-sidelightconnectionfor 10 and 12 mm glass,Art. No. 8.29.320.700.99AISI 316LArt. No. 8.29.360.700.99
Overpanel-sidelightconnectionwith stop insidefor 10 and 12 mm glass,Art. No. 8.29.322.700.99
Overpanel-sidelightconnectionwith stop outsidefor 10 mm glass,Art. No. 8.29.324.700.99for 12 mm glass,Art. No. 8.29.325.700.99
24.5
11/06 19
Components for pivoting door system
Ordering informationOrdering information
40
31
94
Wall
Wall
Floor
Glass
Glass
Wall Glass
ø20
ø20
Floor
Floor
Floor
Glassthickness
65
ø 40
1221
94
32
ø 25
ø 15.5
73
7
7
3
65
65
ø55
ø55
113
28.5
A
B
C
Corner lockfor 8 -12 mm glass,Art. No. 8.21.448.700.99
Corner lockwith profile cylinder rose oninside for 8 -12 mm glass,Art. No. 8.21.449.700.99
Profile cylinderfor corner lockArt. No. 8.14.206.000.99
A Eccentric bushingArt. No. 8.05.194.000.99B Bushing, plasticsArt. No. 8.00.110.133.32
C Strike plateArt. No. 8.05.190.000.99
Stop for pivoting doorfloor mountingArt. No. 8.29.950.700.99
Stop for pivoting doorwall mounting, shortArt. No. 8.29.951.700.99
Stop for pivoting doorwall mounting, longArt. No. 8.29.952.700.99
MANET CONCEPT Pivoting door system
20 11/06
X
58811
Components for pivoting door system
Detail A
Detail B
Detail C
Detail Bto wall
Detail Ato wall
Detail Ato sidelight
Detail Bto glass wall
Detail Cto wall
Countersunkholes
Glass thickness
X
X X
3
X
3-0.2
Y
Y
3
Y
70
3 3
70 70
Y
ø26
113
113
3 3
90°
ø32+0.2
113
120
4040
40
120
50160
113
Glass thicknessmm
10/12
13.5 -15.5
The gap and distancedimensions recommended byDORMA are indicated in theadjacent table.
Connection
SidelightWall
SidelightWall
Y
65
62
Gap
Glass preparation for pivoting door system
Detail D
Detail D
Detail E
Detail Ewith stop
Detail EDetail B
BTS
Glass
67
40 40
Y
Y
67 50
X
50
3
3 3
3
67 50
3
120
120
120
113
113
X1±0.3
X2±0.3
X3±0.3
Overalllengthofpivotrod=Doorheight-54mm
89
18.5
24
7
50
3
3 3
40
11/06 21
Detail E
FFL
22 07/06
MANET CONCEPT Sliding door system
Different anti-jumpdevices for solid andtubular track rails
Roller carrier TREND
Roller carrier TREND
Roller carrier CLASSIC
Roller carrier CLASSIC
Sliding door systemThe MANET sliding doorsystem is ideal as an elegantaddition complementinghigh-style interior concepts.Its main components take theform of a solid track rail andthe roller carrier. Whether youprefer the TREND or CLASSICversions, both can be combi-ned with the solid track or atubular track by simply repla-cing the anti-jump device.The range includes both glass-flush and proud single-pointfixings. The sliding doorsystem allows plenty of scopefor individual ideas.
In addition to the standardversions incorporated intoughened glass partitionsor face-fixed on masonryopenings, this hardwaresystem can also be used toconstruct curved sliding doors,biparting sliding doors andparallel sliding doors.The fittings are designed fora door weight of max. 120 kg.Mechanical stops that can bepositioned on the track railensure that the door traveldistance is effectively limited.
Glass connection with drilled solid track rails
Glass connection with clamp fixing and tubes
Roller carrier
Roller carrier TRENDincl. anti-jump device(both variants)
only lug with rollerArt. No. 8.29.414.700.99
Ordering information
07/07 23
55
55
208
55
55
205
Roller carrier CLASSICincl. anti-jump device(both variants)
only lug with rollerArt. No. 8.29.400.700.99AISI 316LArt. No. 8.29.401.700.99
2 piece single-point fixingfor roller carrier:
countersunk 8 -12mm glassArt. No. 8.29.430.700.99AISI 316LArt. No. 8.29.431.700.99
clamping disc 8-12mm glassArt. No. 8.29.432.700.99AISI 316LArt. No. 8.29.433.700.99
countersunkfor 13.5 -17.5 mm glassArt. No. 8.29.435.700.99
countersunk f. 19 mm glassArt. No. 8.29.437.700.99
Roller carrier TREND
Roller carrier CLASSIC
24 11/06
MANET CONCEPT Sliding door system
Roller carrier single point fixings for timber doors
2 pieces single point fixingfor roller carrier:TREND / CLASSICcountersunkor clamping disc
see table
Ordering information
mm
20 - 30
35 - 40
Single-point fixing (2 pcs)
for roller carrier
Art. No.
countersunk clamping disc
29.510 29.520
Single-point fixing fixed
for track to glass
10/12 mm, see page 26
Art. No.
countersunk clamping disc
29.460 29.465
29.530 29.535
Single-point fixing cent-
ring for track to glass
10/12 mm, see page 26
Art. No.
countersunk clamping disc
29.462 29.467
29.531 29.536
Flange fixingtrack to wallsee page 27
Art. No.
21.346
21.412
max.doorweight
kg
120
100
Insertsolid track rail
Insertsliding track tube
Forsolid
trackrail
mm
18.5
35
X Z
mm
20 - 30
35 - 40
Single-point fixing (2 pcs)
for roller carrier
Art. No.
countersunk clamping disc
29.510 29.520
Clamp fixing fortrack to wallsee page 29
Art. No.
21.153
21.157
Clamp fixing fortrack to glasssee page 29
Art. No.countersunk clamping disc
29.171 29.172
29.518 29.519
max.doorweight
kg
120
100
Forslidingtracktube
mm
18.5
35
X Z
60
60
Glass thickness
Z
X
Z
Glass thickness
15 15
55
Height adjustment-2.5
Height adjustment-2.5
55
37 37
35
28
35
28
X
11/06 25
Solid track rail Supply and installationTrack supply and installationThe track rail for the slidingdoor is pre-fabricated accor-ding to the customer’s drawingand supplied together with theglass or wall brackets orderedfor the application concerned.
Fixing screws for wallinstallation by othersOf decisive importance for pre-fabrication and fixing to glasspartitions is that the mountingpoints coincide with the holesdrilled in the glass. The length-wise tolerances should not begreater than +/- 0.3 mm.
For rail support intervals onthe glass wall or masonry,see fixing point intervalrecommendations per thetable.
Wall/single-pointfixing clearance whenusing the wallconnec-tor (depends on stop-per position).
Caution! Ensure that the stops/single-point fixings arepositioned at locations appropriate to the width of the
door.
G = Fixing point to glassW = Fixing point to wall
K = ConnectionWK = Angle-connection
Required dimensions for the track production
G
see table 50
100 see table
see table
Track length
max. 5000 with connector
* Note!Ensure that track joints and glass joints do not coincide
max. 5000 with angle-connector
max. 5000 with connector
3
3
min. 80
min.80
37.5
37.5
18.5
18.5
G W W
G
G
G G GG
K*
WK
G G G
100 100see table
see table see table see table
1900
2000
2100
2200
2300
2400
2500
700 800 900 1000 1100 1200 1300 1400Door width in mm
Glass thickn. mm
Doorheightin mm 8
770
750
730
710
690
680
660
10
710
700
680
660
640
630
610
12
670
650
640
620
610
590
580
Glass thickn. mm8
770
750
730
710
700
680
670
12
670
660
640
620
610
590
580
Glass thickn. mm8
770
750
730
710
700
680
670
10
710
690
680
660
650
630
620
12
670
650
640
620
610
590
580
Glass thickn. mm8
760
740
730
710
690
680
660
10
710
690
670
660
640
630
620
12
670
650
630
620
600
590
580
Glass thickn. mm8
760
740
720
700
690
670
660
10
700
680
670
650
640
620
610
12
660
640
630
610
600
590
580
Glass thickn. mm8
750
730
710
700
680
670
650
10
700
680
660
650
630
620
610
12
650
640
620
610
600
580
570
Glass thickn. mm8
740
720
710
690
680
660
650
10
690
670
660
640
630
610
600
12
650
630
620
600
590
580
570
Glass thickn. mm8
730
720
700
680
670
660
640
10
680
660
650
630
620
610
600
12
640
630
610
600
580
-
-
10
720
700
680
660
650
630
620
Recommended distance of the track fixing points
MANET CONCEPT Sliding door system
Components for sliding door system Solid track rail and accessories
Ordering information
Recommended distance of the fixing points see page 25 *for X see page 24
up to 6m*
Connection 180°
Solid track rail
ø25
The track rail isprefabricated percustomer specifi-cations/drawingwith all the neces-sary drill holesalready provided.
37.5
37.5
Threaded rodM5 x 6
Angleconnection90 -180°
*max. single length 5 mby coupling
A for *X = 20 - 30 mmSingle-point fixing,countersunk, fixedfor 10 and12 mm glass
Art. No. 8.29.460.700.99AISI 316LArt. No. 8.29.461.700.99
for 13.5 -15.5 mm glassArt. No. 8.29.450.700.99for 17.5 mm glassArt. No. 8.29.451.700.99
clamping disc, fixedfor 10/12 mm GlasArt. No. 8.29.465.700.99countersunk, centringfor 10 and 12 mm glass
Art. No. 8.29.462.700.99AISI 316LArt. No. 8.29.463.700.99for 13.5 -15.5 mm glassArt. No. 8.29.455.700.99for 17.5 mm glassArt. No. 8.29.456.700.99
clamping disc, centringfor 10/12 mm glass
Art. No. 8.29.467.700.99AISI 316LArt. No. 8.29.468.700.99
B for *X = 35 - 40 mmSingle-point fixing,countersunk, fixedfor 10 and12 mm glass
Art. No. 8.29.530.700.99
clamping disc, fixedfor 10/12 mm GlasArt. No. 8.29.535.700.99countersunk, centringfor 10 and 12 mm glass
Art. No. 8.29.531.700.99
clamping disc, centringfor 10/12 mm glass
Art. No. 8.29.536.700.99
Track, drilled
for fixing on glassup to 6 mArt. No. 8.21.405.700.99AISI 316LArt. No. 8.21.456.700.99
for fixing on wallup to 6 mArt. No. 8.21.406.700.99AISI 316LArt. No. 8.21.457.700.99
Connectorsincl. frontal preparation intracks,
for tracks 180°Art. No. 8.21.404.700.99
offsetfor tracks 90 -180°Art. No. 8.21.442.700.99
Single point fixing for fixing thetrack to glass
Glass thickness
18.5
ø25
26 11/06
A
Glass thickness
35
ø25
B
Components for sliding door system Solid track rail and accessories
Flange for fixing the trackto wallArt. No. 8.21.346.700.99AISI 316LArt. No. 8.21.347.700.99
Flange for fixing the trackto wall, adjustableArt. No. 8.21.412.700.99
Fixing for double trackArt. No. 8.21.170.700.99
Ceiling retainer for track
carrying functionArt. No. 8.21.315.700.99
Ordering information
Flange for fixing the trackto wall
18.5
18.5
10/12
35
ø 65
110
ø20
ø55
ø 25
ø 25
29
ø25
60
ø25
Flange for fixing the trackto wall,adjustable
Flange for fixing a double track
Note: Min. distanceglass to wall 32 mm
2-dimensional adjustmentvia oblong hole
Recommended distance of the fixing points see page 25
Adjust-ment + 5 mm
11/06 27
28 07/06
MANET CONCEPT Sliding door system
Components for sliding door system Tube and accessories
Ordering information
3m/6m
Sliding track tubeincl. end plugsstock length 3mArt. No. 8.21.527.700.99AISI 316LArt. No. 8.21.530.700.99
Fixed length up to 6 mArt. No. 8.21.436.700.99AISI 316LArt. No. 8.21.532.700.99
Sliding track tubebent, incl. end plugs
max. curve length 2.6 mArt. No. 8.21.409.700.99
max. curve length 5.6 mArt. No. 8.21.413.700.99
Curve length
r=
min.600mm
ø21
ø25
40
ø21
40
40
Angle connectionfor sliding track tubeArt. No. 8.29.506.700.99
Thread insertfor sliding track tubeArt. No. 8.29.505.700.99
see table
Recommended distance of thetrack fixing points
1900
2000
2100
2200
2300
2400
2500
700 800 900 1000 1100 1200 1300 1400
Door width in mm
Glass thickn. mm
Doorheightin mm
8
350
350
350
350
350
350
350
10
350
350
350
350
350
350
350
12
350
350
350
350
350
350
350
Glass thickn. mm8
400
400
400
400
400
400
400
10
400
400
400
400
400
400
400
12
400
400
400
400
400
400
400
Glass thickn. mm8
450
450
450
450
450
450
450
10
450
450
450
450
450
450
450
12
450
450
450
450
450
450
450
Glass thickn. mm8
500
500
500
500
500
500
500
10
500
500
500
500
500
500
490
12
500
500
500
490
480
470
460
Glass thickn. mm8
550
550
550
550
550
530
520
10
550
540
530
520
510
500
490
12
530
510
500
490
480
470
460
Glass thickn. mm8
600
580
570
550
540
530
520
10
550
540
530
510
500
490
480
12
520
510
500
480
470
460
450
Glass thickn. mm8
590
570
560
550
540
530
520
10
550
530
520
510
500
490
480
12
510
500
490
480
470
460
450
Glass thickn. mm8
580
570
560
540
530
520
510
10
540
530
520
500
490
480
470
12
510
500
490
470
460
-
-
Components for sliding door system Tube and accessories
11/06 29
Ordering information
Clamp fixingfor sliding track tube toglass, single-point fixingcountersunkfor 10, 12 and 13.5mm glassArt. No. 8.29.171.700.99AISI 316LArt. No. 8.29.181.700.99
single-point fixing, clamping discfor 10, 12 and 13.5mm glassArt. No. 8.29.172.700.99AISI 316LArt. No. 8.29.182.700.99
16 mm extendedsingle-point fixing, countersunkfor 10, 12 and 13.5mm glassArt. No. 8.29.518.700.99AISI 316LArt. No. 8.29.183.700.99
single-point fixing, clamping discfor 10, 12 and 13.5mm glassArt. No. 8.29.174.700.99AISI 316LArt. No. 8.29.184.700.99
Clamp fixingfor sliding track tube to wallArt. No. 8.21.153.700.99AISI 316LArt. No. 8.21.163.700.99
Clamp fixingfor sliding track tube to wall16 mm extendedArt. No. 8.21.157.700.99
Clamp fixingto fix the sliding track tubefor double panelled slidingdoorsArt. No. 8.21.154.700.99
ø 25
18.5
18.5
35
48
ø 25
ø 25
ø 25
Glass thickness
ø 25
35
Glass thickness
Ceiling retainerfor sliding track tube,carrying functionArt. No. 8.21.316.700.99
ø 65
110
ø 25
ø 2526
Glass preparation for sliding door system
MANET CONCEPT Sliding door system
Sliding door with two sidelights and overpanel
Sliding door with sidelight and overpanel
Sliding door to wall
Detail A Detail B
Detail C
Sliding doorWall
Wall
Overpanel
Sidelight
Sliding door Wall
Sliding door
Overpanel
SidelightSidelight
Detail D
Detail E Detail D
30 11/06
Glass preparation for sliding door system
Sliding door with tube andclamp fixing
Sliding door withsolid track rail
Detail D
27.5
27.5
27.5
18.5
35
60
50
55
27.5
18.5
35
60
50
55
40
Detail C
Detail E
Detail A Detail B
3 -0.2
Glass thickness Glass thickness
ø26
ø32+0.2
ø26
90°
143 143
143143
glass edge protectionon site
143
100
3
50 50
40
40
3
50
4040
Countersunkbore for coun-tersunk single-point fixings
Cylindrical borefor clampingdisc single-point fixings
Dimensional data should be regardedexclusively as recommended values.Please remember when designingyour system that the positions of thestops and point fixings must notvertically coincide.
For spacing/interval recommendati-ons when drilling the track holes,and for requisite dimensions forfixing the track rail,please refer to the table entitled“Recommended distance of the trackfixing points”.
11/06 31
Components for sliding door system
MANET CONCEPT Sliding door system
Ordering information
Door stopleft handArt. No. 8.29.425.700.99
AISI 316LArt. No. 8.29.427.700.99
right handArt. No. 8.29.426.700.99
AISI 316LArt. No. 8.29.428.700.99
Roller to glassfor 8 -12 mm glass,countersunkArt. No. 8.29.494.700.99
clamping discArt. No. 8.29.495.700.99
Anti-jump devicefor roller to glassfor 8 -12 mm glass,countersunkArt. No. 8.29.497.700.99
clamping discArt. No. 8.29.498.700.99
Door stopfor roller to glassArt. No. 8.29.493.700.99
Wall fixing fortube /solid track railArt. No. 8.29.445.700.99AISI 316LArt. No. 8.29.446.700.99
Door steady,to prevent glass edges ofdouble sliding doorsbumping into each otherArt. No. 8.29.420.700.99
stop is usable left hand andright hand
left hand
right hand
56
2070
50
35
ø35
ø25
32 02/08
6
Components for sliding door system
Ordering information
Aluminium brush profile
similar satin stainless steel
for 8 mm glassstock length 3 mArt. No. 8.07.402.113.99
fixed length up to 6 mArt. No. 8.07.403.113.99
for 10/12 mm glassstock length 3 mArt. No. 8.07.400.113.99
fixed length up to 6 mArt. No. 8.07.401.113.99
Sliding door lock withratchet brace
for 8/10/12 mm glass
Art. No. 8.21.446.700.99AISI 316L
Guide rail with brush sealsapplicable for8/10/12 mm glass
aluminium mill finishedfixed length up to 6 mArt. No. 8.21.431.100.99
stock length 3 mArt. No. 8.21.432.100.99
Floor guideclamping disc,applicable for8/10/12/13.5 mm glassArt. No. 8.07.326.000.99
13.5
37.5
15.5for 8 mm glass
13.5for 10 mm glass
11.5for 12 mm glass
ø38
ø48
75
30
50
23
24
30
15
15
7
11/06 33
MANET CONCEPT Pull handle /knob system
The pull handle/knob systemis designed for glass of 8, 10and 12 mm thickness.The pull handles can be fixedto both sliding and pivoting(swing) doors on one faceusing the appropriate connec-tors or on both faces bythrough-bolting (back-to-backarrangement). The single-point fixings and throughbolts are included as standardequipment in the scope ofsupply.The pull handles can be fittedhorizontally, vertically or in ahandrail arrangement.
Pull handles and door knobs
Pull handles with single-point fixings, countersunkfor 8/10/12 mm glass
Pull handle 350 mmwith 2 fixingsArt. No. 8.29.268.700.99AISI 316LArt. No. 8.29.269.700.99
Pull handle 720 mmwith 2 fixingsArt. No. 8.29.271.700.99AISI 316LArt. No. 8.29.272.700.99
Pull handle 1240 mmwith 3 fixingsArt. No. 8.29.274.700.99AISI 316LArt. No. 8.29.275.700.99
Pull handle 1760 mmwith 4 fixingsArt. No. 8.29.277.700.99AISI 316LArt. No. 8.29.278.700.99
Pull handles with clampingdisc single-point fixingsfor 8/10/12 mm glass
Pull handle 350 mmwith 2 fixingsArt. No. 8.21.240.700.99AISI 316LArt. No. 8.21.280.700.99
Pull handle 720 mmwith 2 fixingsArt. No. 8.21.241.700.99AISI 316LArt. No. 8.21.281.700.99
Pull handle 1240 mmwith 3 fixingsArt. No. 8.21.242.700.99AISI 316LArt. No. 8.21.282.700.99
Pull handle 1760 mmwith 4 fixingsArt. No. 8.21.243.700.99AISI 316LArt. No. 8.21.283.700.99
Ordering information
Single-point fixingcountersunk
Single-pointfixingclamping disc
Complete withsingle-point fixings
ø32
ø16
45.5ø 25
Glassthickness
350
150
520
520
520
1240
1760
720
34 11/06
Pull handles and door knobs
Complete withconnecting bolt
Pair of pull handlesincl. connecting boltfor 8/10/12 mm glass
Pair of pull handles350 mm, with 2 fixingsArt. No. 8.21.267.700.99AISI 316LArt. No. 8.21.247.700.99
Pair of pull handles720 mm, with 2 fixingsArt. No. 8.21.270.700.99AISI 316LArt. No. 8.21.250.700.99
Pair of pull handles1240 mm, with 3 fixingsArt. No. 8.21.273.700.99AISI 316LArt. No. 8.21.253.700.99
Pair of pull handles1760 mm, with 4 fixingsArt. No. 8.21.276.700.99AISI 316LArt. No. 8.21.256.700.99
Ordering information
Door knob one side fixingfür 8/10/12 mmGlas
Door knob with single-pointfixing, countersunkArt. No. 8.21.422.700.99
Door knob with clampingdisc single-point fixingsArt. No. 8.21.426.700.99
Door knob back-to-backfor 8/10/12 mm glassArt. No. 8.21.423.700.99
single-pointfixingcountersunk
single-pointfixingclamping disc
Glass thickness
ø16
45 70
ø 25ø 25
Glass thickness
Glassthickness
51
ø32
ø25
ø25
51 51
350
150
520
520
520
1240
1760
720
11/06 35
MANET CONCEPT Pull handle /knob system
Spacing adjustment for pull handles and door knobs
at length of pull handles350 mm
Ordering information
Conversion set 1 forglass doors,pair of pull handles/knob back-to-back
door thickn. 13.5–21.5 mmArt. No. 8.21.285.700.99
Conversion set 2 fortimber doors,pair of pull handles/knob back-to-back
door thickn. 20– 40 mmArt. No. 8.21.286.700.99
Conversion set 3for glass/timber doors,pull handle/knob single-sided,
single-point fixingcountersunk/clamping discdoor thickn. 15– 40 mmArt. No. 8.21.287.700.99
Countersunk boreon pull handle and door knob,one side fixing
3 -0.2
Glass thickness
Glass thickness
ø26
ø32+0.2
ø22
90°
Cylindrical boreon pair of pull handlesand door knobs,back-to-back
1560mm±0.31040mm±0.3
520mm±0.3
150mm±0.3
min. ca. 65
min. ca. 65
Glass preparation pull handles and door knobs
Glass doorsdoor thickn. 13.5 mm: without Distancewasherdoor thickn. 15 mm: with 1 Distance washerdoor thickn. 17.5 mm: with 2 Distance washerdoor thickn. 19 mm: with 3 Distance washerdoor thickn. 21.5 mm: with 4 Distance washer
Timber doorsdoor thickn. 20 mm: without distance washerdoor thickn. 25 mm: with 1 distance washerdoor thickn. 30 mm: with 2 distance washerdoor thickn. 35 mm: with 3 distance washerdoor thickn. 40 mm: with 4 distance washer
Glass doors/timber doorsdoor thickn. 15–21.5 mm: cylinder head screw M6x25door thickn. 25–30 mm: cylinder head screw M6x35door thickn. 35–40 mm: cylinder head screw M6x50
Distance washer2 mm
Distance washer5 mm
36 11/06
07/07 37
Recessed pull grip und ARCOS pull handle
Ordering information
ARCOS pair of pull handlefor 8/10/12 mm glassincl. connecting bolt
only in AISI 316L
Pull handle 350 mmwith 2 fixingsArt. No. 8.26.500.700.99
Pull handle 750 mmwith 2 fixingsArt. No. 8.26.510.700.99
ø16
ø16
80
Glassthickness
Cylindrical bore
Connectingbolt
398/824mm
350/750mmdrillholecentres
~ 6585
Bushing
Grub screw
Glassthickness
Recessed pull gripØ 50 mmfor 8/10/12 mm glassArt. No. 8.21.290.700.99
Recessed pull gripØ 60 mmfor 8/10/12 mm glassArt. No. 8.21.291.700.99
Glassthickness
Glassthickness
Cylindricalbore
ø50
ø38
20 3
Glass thickness Glass thickness
Cylindricalbore
ø60
ø50
9 9
DORMA MANET COMPACT Sets
Content
Pivoting door 40
Sliding door 44
MANETCOMPACT Sets
Pivoting doorsSet 1page 41
Pivoting doorsSet 2page 42
Pivoting doorsSet 3page 43
Pivoting doorsSet 2 + 3page 42/43
Sliding doorsSet 4/5/6page 44 - 49
MANET COMPACT Sets
Construction 5 (2 sets) Construction 6 (2 sets) Construction 7 (2 sets) Construction 8 (2 sets)
Construction 1 (1 set) Construction 2 (1 set) Construction 3 (1 set) Construction 4 (1 set)
The aesthetic elegance of theMANET COMPACT concept isalso available in the form ofstandardised sets for simple,fast planning of the morepopular system types with 8,10 or 12 mm toughenedsafety glass (TSG).Optional accessories enablethe individual sets to besemi-customised.
The system components offernumerous adjustment possibi-lities in order to ensure pro-blem-free installation ofwhichever door type – slidingor swing, single action ordouble action – is required.Wall abutment profiles mayneed to be provided (byothers) for fixing overpanelsand sidelights.
Construction 9 (1 set) Construction 12 (1 set) Construction 18 (2 sets)
Set 4.1/4.2 Set 5.1/5.2 Set 6.1/6.2
Construction 13 (1 set) Construction 15 (1 set) Construction 23 (2 sets)
Construction 21 (each 1 set)
MANET COMPACT Sets
40 11/06
Set 1
Ordering information
Set 1 consisting of:pivot rod pair top/bottom,short type,
including:4 Single-point fixings for pivot rods,1 Pivot fitting top,1 PT 25 pin, 15 mm Ø, with plug1 Pivot fitting bottomfor DORMA BTS/floor pivot
Art. No. 8.29.910.700.99
Art. No. 8.29.911.700.99
Option:Set 1, but with additional intermediate tube for pivot rod pairin fixed length
Options for SET 1
Pull handles Length 350 mmLength 720 mmLength 1240 mmLength 1760 mm
Pair of pull handles Length 350 mmLength 720 mmLength 1240 mmLength 1760 mm
Stopfor pivoting door with ceiling mounting
Ceiling fixing (bearing function)
Corner lock
Corner lockwith rose on one lock side
Profile cylinder forcorner lock 8.21.448/449.700.99
Eccentric bushing forcorner lock 8.21.448/449.700.99
Floor pivot bearing
Assembling tool for MANET single-pointfixings
5 pcs. clip-on cover f. single-point fixings
Sample cases MANET COMPACTfor advice and presentation
Art. No. 8.29.268.700.99Art. No. 8.29.271.700.99Art. No. 8.29.274.700.99Art. No. 8.29.277.700.99
Art. No. 8.21.267.700.99Art. No. 8.21.270.700.99Art. No. 8.21.273.700.99Art. No. 8.21.276.700.99
Art. No. 8.21.334.700.99Art. No. 8.29.337.700.99
Art. No. 8.21.448.700.99
Art. No. 8.21.449.700.99
Art. No. 8.14.206.000.99
Art. No. 8.05.194.700.99
Art. No. 8.01.106.700.99
Art. No. 8.21.134.000.99
Art. No. 8.29.217.700.99
Art. No. 8.21.994.700.99
S8
S8
Pivoting door MANET COMPACT without overpanel for 10 -12 mm glass
Set 1with pivot rod pairshort type
For the requisite glass preparationplease see pages 20/21
3Gap
150
113
65
Ceiling
7Gap
Gapto sidelight 5to wall 8
Door weight80 kg
Door height2500 mm
Door width1200 mm
150
113
65
DORMABTS
Panel height _________ mm– 577 mm= Length intermed. tube_________ mm
Essential information:
07/07 41
MANET COMPACT Sets
Set 2
Ordering information
Set 2 consisting of:pivot rod pair top/bottom,short type,
including:4 Single-point fixings for pivot rods,1 Pivot fitting top,1 Pivot bearing location for overpanel1 Pivot fitting bottomfor DORMA BTS/floor pivot
Art. No. 8.29.912.700.99
Art. No. 8.29.913.700.99
Option:Set 2, but with additional intermediate tube for pivot rod pairin fixed length
Options for SET 2
Pull handles Length 350 mmLength 720 mmLength 1240 mmLength 1760 mm
Pair of pull handles Length 350 mmLength 720 mmLength 1240 mmLength 1760 mm
Ceiling fixing (bearing function)
Stop at overpanel, (inside/outside)for 10 and 12 mm glass
Corner lock top/bottom
Corner lock top/bottomwith rose on one lockside
Profile cylinder forcorner lock 8.21.448/449.700.99
Eccentric bushing forcorner lock 8.21.448/449.700.99
Overpanel-sidel. conn. for 10/12 mm glass
Overp.-sidel. conn. with stop inside for10 and 12 mm glass
Overp.-sidel. conn. with stop outsidefor 10 mm glassfor 12 mm glass
Floor pivot
Assembling tool for MANET-single-point f.
5 pcs. clip-on cover f. single-point fixings
Sample cases MANET COMPACTfor advice and presentation
Art. No. 8.29.268.700.99Art. No. 8.29.271.700.99Art. No. 8.29.274.700.99Art. No. 8.29.277.700.99
Art. No. 8.21.267.700.99Art. No. 8.21.270.700.99Art. No. 8.21.273.700.99Art. No. 8.21.276.700.99
Art. No. 8.29.337.700.99
Art. No. 8.29.335.700.99
Art. No. 8.21.448.700.99
Art. No. 8.21.449.700.99
Art. No. 8.14.206.000.99
Art. No. 8.05.194.700.99
Art. No. 8.29.320.700.99
Art. No. 8.29.322.700.99
Art. No. 8.29.324.700.99Art. No. 8.29.325.700.99
Art. No. 8.01.106.700.99
Art. No. 8.21.134.000.99
Art. No. 8.29.217.700.99
Art. No. 8.21.994.700.99
Pivoting door MANET COMPACT with overpanel for 10 -12 mm glass
Set 2with pivot rod pairshort type
For the requisite glass preparationplease see pages 20/21
3Gap
Wall
150
113
65
Overpanel
7Gap
Gap towall 8
Door weight80 kg
Door height2500 mm
Door width1200 mm
150
113
65
DORMABTS
Panel height _______ mm– 577 mm= Length intermed. tube_______ mm
Essential information:
42 07/07
Set 3
Ordering information
Set 3 consisting of:pivot rod pair top/bottom,short type,
including:4 Single-point fixing for pivot rods,1 Pivot fitting top,1 Overpanel-sidelight connector withpivot bearing location,
1 Pivot fitting bottomfor DORMA BTS/floor pivot bearing
Art. No. 8.29.914.700.99
Art. No. 8.29.915.700.99
Option:Set 3, but with additional intermediate tube for pivot rod pairin fixed length
Options for SET 3
Pull handles Length 350 mmLength 720 mmLength 1240 mmLength 1760 mm
Pair of pull handles Length 350 mmLength 720 mmLength 1240 mmLength 1760 mm
Ceiling fixing (bearing function)
Stop at overpanel, (inside/outside)for 10 and 12 mm glass
Corner lock
Corner lockwith rose on one lockside
Profile cylinder forcorner lock 8.21.448/449.700.99
Eccentric bushing forcorner lock 8.21.448/449.700.99
Overpanel-sidel. conn. for 10/12 mm glass
Overp.-sidel. conn. with stop inside for10 and 12 mm glass
Overp.-sidel. conn. with stop outsidefor 10 mm glassfor 12 mm glass
Floor pivot
Assembling tool for MANET-single-point f.
5 pcs. clip-on cover f. single-point fixings
Sample cases MANET COMPACTfor advice and presentation
Art. No. 8.29.268.700.99Art. No. 8.29.271.700.99Art. No. 8.29.274.700.99Art. No. 8.29.277.700.99
Art. No. 8.21.267.700.99Art. No. 8.21.270.700.99Art. No. 8.21.273.700.99Art. No. 8.21.276.700.99
Art. No. 8.29.337.700.99
Art. No. 8.29.335.700.99
Art. No. 8.21.448.700.99
Art. No. 8.21.449.700.99
Art. No. 8.14.206.000.99
Art. No. 8.05.194.700.99
Art. No. 8.29.320.700.99
Art. No. 8.29.322.700.99
Art. No. 8.29.324.700.99Art. No. 8.29.325.700.99
Art. No. 8.01.106.700.99
Art. No. 8.21.134.000.99
Art. No. 8.29.217.700.99
Art. No. 8.21.994.700.99
Pivoting door MANET COMPACT with overpanel and sidelight for 10 -12 mmglass
Set 3with pivot rod pair,short type
For the requisite glass preparationplease see pages 20/21
3Gap
3 Gap
Sidelight
150
113
65
Overpanel
7Gap
Gap towall 8
Door weight80 kg
Door height2500 mm
Door width1200 mm
150
113
65
DORMABTS
Panel height ________ mm– 577 mm= Length intermed. tube_________ mm
Essential information:
07/07 43
MANET COMPACT Sets
Set 4.1 / 4.2
Sliding door MANET COMPACT for installation to wall, for 8 -12 mm glass
For the requisite glass preparation pleasesee pages 30/31
60
143
143143
Doorheightmax.2500mm
85
40 40
DGB = LM - 130 mm
LM
TB = LM + 80 mm
Fixed length: LL = 4 * X +286 mm
X XX X
Note:Door weight max. 100 kg
Set 4.1with single-point fixings countersunk
Set 4.2with clamping disc single-point fixings
LM = Daylight opening 700 - 1280 mmTB = Door width 780 - 1360 mmDGB = Entry width 570 - 1150 mmLL = Sliding track tube lengthX = Distance of single-point fixings
(LM –148) * 1/2
44 11/06
Set 4.1 / 4.2
Set 4.1 / Set 4.2consisting of
5 Clamp fixingsfor track to wall
2 Roller carriers CLASSICincl. single-point fixings for 8 -12 mm glass
1 Door stop left hand1 Door stop right hand1 Floor guideInstallation tools
Set as above,but with 16 mm extended clamp fixing
Art. No. 8.29.917.700.99Art. No. 8.29.916.700.99
Art. No. 8.29.925.700.99
Options for Set 4.1 / Set 4.2
Pull handles Length 350 mmLength 720 mmLength 1240 mmLength 1760 mm
Pair of pull handles Length 350 mmLength 720 mmLength 1240 mmLength 1760 mm
Door knobback-to-back for 8 - 12 mm glass
Door knobone side fixing for 8 - 12 mm glass
Corner lock
Corner lockwith rose on one lock side
Profile cylinder forcorner lock 8.21.448/449.700.99
Eccentric bushing forcorner lock 8.21.448/449.700.99
Aluminium guide railLength 3000 mm
Assembling tool for MANET single-point fixing
5 pcs. clip-on cover f. single-point fixings
Sample cases MANET COMPACTfor advice and presentation
Art. No. 8.21.240.700.99Art. No. 8.21.241.700.99Art. No. 8.21.242.700.99Art. No. 8.21.243.700.99
Art. No. 8.21.267.700.99Art. No. 8.21.270.700.99Art. No. 8.21.273.700.99Art. No. 8.21.276.700.99
Art. No. 8.21.423.700.99
Art. No. 8.29.422.700.99
Art. No. 8.21.448.700.99
Art. No. 8.21.449.700.99
Art. No. 8.14.206.000.99
Art. No. 8.05.194.700.99
Art. No. 8.21.432.700.99
Art. No. 8.21.134.700.99
Art. No. 8.29.217.700.99
Art. No. 8.21.994.700.99
Sliding door MANET COMPACT forinstallation to wall, for 8 -12 mm glass
Set 4.1with countersunksingle-point fixings
Set 4.2with clamping discsingle-point fixings
Art. No. 8.29.268.700.99Art. No. 8.29.271.700.99Art. No. 8.29.274.700.99Art. No. 8.29.277.700.99
Art. No. 8.21.267.700.99Art. No. 8.21.270.700.99Art. No. 8.21.273.700.99Art. No. 8.21.276.700.99
Ordering information
Art. No. 8.29.926.700.99
10/07 45
MANET COMPACT Sets
Set 5.1 / 5.2
Sliding door MANET COMPACT for installation to glass, one side attached to masonryfor sliding door 8 -12 mm glass,glass connection overpanel/sidelight 10 - 13.5 mm
For the requisite glass preparationplease see pages 30/31
60
143
50
50
30
143143
Doorheightmax.2500mm
70
40
DGB = LM–100 mm
LM
TB = LM + 40 mm
Fixed length: LL = 2 * X + 2 * Y + 360 mm
OB = LM–3 mm
Gap 3 mm
SB min. = LM–60 mm
X X Y Y
Note:Door weight max. 100 kg
Sliding door
SidelightOverpanel
Set 5.1with countersunk single-point fixings
Set 5.2with clamping disc single-point fixing
LM = Daylight opening 700 -1320 mmTB = Door width 740 -1360 mmDGB = Entry width 600 -1220 mmSBmin. = min. sidelight widthLL = Sliding track tube lengthX = Centre distance
between single-point fixingsoverpanel(OB –193) * 1/2
Y = Centre distancebetween single-point fixingssidelightY = X–29
OB = Overpanel width
46 11/06
Set 5.1 / 5.2
Set 5.1 / Set 5.2consisting of
6 Clamp fixingsfixing to glass, countersunk
2 Roller carriers CLASSICincl. single-point fixings for 8 -12 mm glass
1 Wall fixing1 Door stop left hand1 Door stop right hand1 Floor guideInstallation tools
Art. No. 8.29.919.700.99Art. No. 8.29.918.700.99
Options for Set 5.1 / Set 5.2
Pull handles Length 350 mmLength 720 mmLength 1240 mmLength 1760 mm
Pair of pull handles Length 350 mmLength 720 mmLength 1240 mmLength 1760 mm
Door knobback-to-back for 8 - 12 mm glass
Door knobone side fixing for 8 - 12 mm glassCorner lock
Corner lockwith rose on one lock side
Profile cylinder forcorner lock 8.21.448/449.700.99
Eccentric bushing forcorner lock 8.21.448/449.700.99
Aluminium guide railLength 3000 mm
Ceiling connector(bearing function)
Assembling tool for MANET single-point fixing
5 pcs. clip-on cover f. single-point fixings
Sample cases MANET COMPACTfor advice and presentation
Art. No. 8.21.240.700.99Art. No. 8.21.241.700.99Art. No. 8.21.242.700.99Art. No. 8.21.243.700.99
Art. No. 8.21.267.700.99Art. No. 8.21.270.700.99Art. No. 8.21.273.700.99Art. No. 8.21.276.700.99
Art. No. 8.29.268.700.99Art. No. 8.29.271.700.99Art. No. 8.29.274.700.99Art. No. 8.29.277.700.99
Art. No. 8.21.267.700.99Art. No. 8.21.270.700.99Art. No. 8.21.273.700.99Art. No. 8.21.276.700.99
Art. No. 8.21.423.700.99
Art. No. 8.29.422.700.99
Art. No. 8.21.448.700.99
Art. No. 8.21.449.700.99
Art. No. 8.14.206.000.99
Art. No. 8.05.194.700.99
Art. No. 8.21.432.700.99
Art. No. 8.29.337.700.99
Art. No. 8.21.134.000.99
Art. No. 8.29.217.700.99
Art. No. 8.21.994.700.99
Sliding door MANET COMPACT for installation toglass, one side attached to masonry,for sliding door 8 -12 mm glass,glass connection overpanel/sidelight 10 - 13.5 mm
Set 5.1with countersunksingle-point fixings
Set 5.2with clamping discsingle-point fixings
Ordering information
10/07 47
MANET COMPACT Sets
Set 6.1 / 6.2
Sliding door MANET COMPACT for installation to glass, sidelights on both sidesfor sliding door 8 -12 mm glass,glass connection overpanel/sidelight 10 - 13.5 mm
For the requisite glass preparationplease see page 30/31
60
143
50
5050
100
143143
Doorheightmax.2500mm
70
4040
DGB = LM–100 mm
LM
TB = LM + 80 mm
Fixed length: LL = 2 * X + 2 * Y + 460 mm
OB = LM–6 mmmin. 110
Gap 3 mmGap 3 mm
SB min. = LM–20 mm
X X Y Y
Note:Door weight max. 100 kg
Sliding door
SidelightSide-light
Overpanel
Set 6.1with countersunk single-point fixings
Set 6.2with clamping disc single-point fixings
LM = Daylight opening 700 -1320 mmTB = Door width 740 -1360 mmDGB = Entry width 600 -1220 mmOB = Overpanel widthSBmin.= min. Sidelight widthLL = Sliding track tube lengthX = Centre distance
between single-point fixingsoverpanel(OB –150) * 1/2
Y = Centre distancebetween single-point fixingssidelightY = X–29
48 11/06
Set 6.1 / 6.2
Set 6.1 / Set 6.2consisting of
7 Clamp fixingsfixing to glass
2 Roller carriers CLASSICincl. single-point fixings for 8 -12 mm glass
1 Door stop left hand1 Door stop right hand1 Floor guideInstallation tools
Art. No. 8.29.921.700.99Art. No. 8.29.920.700.99
Options for Set 6.1 / Set 6.2
Pull handles Length 350 mmLength 720 mmLength 1240 mmLength 1760 mm
Pair of pull handles Length 350 mmLength 720 mmLength 1240 mmLength 1760 mm
Door knobback-to-back for 8 - 12 mm glass
Door knobone side fixing for 8 - 12 mm glass
Sliding door lock with ratchet brace
Corner lock
Corner lockwith rose on one lock side
Profile cylinder forcorner lock 8.21.448/449.700.99
Eccentric bushing forcorner lock 8.21.448/449.700.99
Aluminium guide railLength 3000 mm
Ceiling connector(bearing function)
Assembling tool for MANET single-point fixing
5 pcs. clip-on cover f. single-point fixings
Sample cases MANET COMPACTfor advice and presentation
Art. No. 8.21.240.700.99Art. No. 8.21.241.700.99Art. No. 8.21.242.700.99Art. No. 8.21.243.700.99
Art. No. 8.21.267.700.99Art. No. 8.21.270.700.99Art. No. 8.21.273.700.99Art. No. 8.21.276.700.99
Art. No. 8.29.268.700.99Art. No. 8.29.271.700.99Art. No. 8.29.274.700.99Art. No. 8.29.277.700.99
Art. No. 8.21.267.700.99Art. No. 8.21.270.700.99Art. No. 8.21.273.700.99Art. No. 8.21.276.700.99
Art. No. 8.21.423.700.99
Art. No. 8.29.422.700.99
Art. No. 8.21.446.700.99
Art. No. 8.21.448.700.99
Art. No. 8.21.449.700.99
Art. No. 8.14.206.000.99
Art. No. 8.05.194.700.99
Art. No. 8.21.432.700.99
Art. No. 8.29.337.700.99
Art. No. 8.21.134.000.99
Art. No. 8.29.217.700.99
Art. No. 8.21.994.700.99
Sliding door MANET COMPACT for installation toglass, sidelight on both sides,for sliding door 8 -12 mm Glas,glass connection overpanel/sidelight 10 - 13.5 mm
Set 6.1with single-point fixingscountersunk
Set 6.2with clamping discsingle-point fixings
Ordering information
10/07 49
DORMA MANET AMBIENT
Content
System 52
Single-point fixings 54
Rods / Tracks 56
Connectors 58
Pivoting doors 60
Sliding doors 64
MANETAMBIENT
1
Wall/ceiling connector
2
Connector
3
Recessed pull grip
4
Inboard furniture hinge
5
Insert rod
6
Top insert
7
Bottom insert
8
Shelf support
9
Outboard furniture hinge
10
Plug-in shelf support
11
Door stop, pivoting door
12
Rod
The material: stainless steelThe components: variable and adaptableThe functions: visual and expressive
MANET AMBIENT System
You have a picture in your head?MANET AMBIENT can supply the materialsand versatility needed to make it a reality.
System
1
26
2
3
4
8
7
8
12
9
11
5
10
1
52 11/06
13
Single-point fixing /Single-point spacer fixing
14
Roller
15
Door stop, sliding door
16
Track rail
13
15
12
2
16
14
16
11/06 53
The cover for the single-point fixing can be detachedby pressing the edge.
MANET AMBIENT Single-point fixings
Countersunk holes are required in the glass in order to ensureflush-mounting. The plastic clamping collar protects theglass from direct contact with the stainless steel fitting.The single-point fixing can be adjusted to offset tolerances.
Single-point fixings
1 2
3 4
ø24
ø24
ø20
M6
M6
Height of screw head max. 4
16
4
16
ø24
ø20
ø41
ø20
M8
64.5
16
1
3
Carcass/wall
Carcass/wall
Glass thickness
Glass thickness
Glass thickness
54 11/06
1Single-point fixingfor 6/8 mm glass, adjustableArt. No. 8.20.601.700.99
2Single-point fixingwith base flangefor 6/8 mm glass, adjustableArt. No. 8.20.611.700.99
3Single-point spacer fixingfor 6/8 mm glassArt. No. 8.20.620.700.99
4Support roseArt. No. 8.20.803.700.99
Ordering information
Countersunk holes fromthe front side
3 -0.2
ø24+0.2
ø18+0.2
90°
min.30
min.30
max.600
Recommended standard distance
Carcass /wall
Carcass /wall
Carcass /wall
Rose ensures enhanced load-bearing supportwhere the substructure may be problematic
Rose moves spacer fixing forward by 1 mmGlass is in flush facial contact or with an intermediate gap
Rotating the oval-shaped holepermits vertical and lateraladjustment of ± 1 mm oncethe front panel has beenmounted.
Single-point fixings are pre-fitted in the glass
Support rose
Spacers are attached separately to the wallor carcass
System combinationwith sliding door
Glass thickness
11/06 55
MANET AMBIENT Rods / Track rails
Various rods, likewise made from stainless steel, can beused as track rails or pivots rods for sliding and pivotingdoors, and as stabilising components for connecting severalfurniture elements.The end faces of the rods are prepared according to theirapplication.
Rods /Track rails
Installation example:Track railSliding door
Installation example:Wall or ceilingconnector, doublesided
Installation example:Wall or ceilingconnector, single sided
Installation example:Pivoting door withinboard furniture hinge
max. 3000
ø20
ø20
ø20
ø20
M8
M8
M8
slotted
plane
max. 3000
max. 3000
max. 3000
56 11/06
Ordering information
Track rail / pivot rodplane/planeArt. No. 8.20.780.700.99
Track rail / pivot rodM8/M8Art. No. 8.20.781.700.99
Track rail / pivot rodplane/M8Art. No. 8.20.782.700.99
Insert rod
slotted / planeArt. No. 8.20.756.700.99
Ordering information
Wall/ceiling connectorArt. No. 8.20.760.700.99
Wall/ceiling connectors enable furniture items to beattached on one or two sides to walls and horizontalsurfaces as required.The flange is positioned on the ceiling or floor first.Next, the relevant rod is placed with a “pressure screw”against the flange (end face with M8 thread).The sleeve, which is already slid onto the rod, is thenscrewed to the flange.
Wall/ceiling connector
40
The rod must be shortenedby 28±3 mm when using thewall/ ceiling connector
28±3
Pressure screw (19 mm) Fixing nut Rod
ø20
ø30
M8 female threadM8 screw on site
The fixing nut can be moved freely along the rodWall/ ceiling flange
The fixing nut is screwed ontothe outside thread of thewall/ ceiling flange andprovides additional stability
The rod can be fixed between the wall/ ceiling flanges usingthe pressure screw (19 mm)
Wall/ceiling flange
11/06 57
Remove the rod with the pre-fixed connectors 1from the base flanges 5 .
Using the large M6 grub screw 4 , finally fixthe connectors 1 in the required position.
Having assembled the rod and connectors 1fit the assembly to the base flanges 5 andsecure with the M4 grub srews 3 .
MANET AMBIENT Connectors
Connectors
Connector, horizontal
Connector, vertical
Connector,sleeve-type
Connectordouble sided
Screw-fix the base flanges 5 in the required position.
Slide all connectors 1 loosely on the rod.
Fit the connectors 1 with the rod onto thebase flanges 5 .
Temporarily fix the connectors 1 to the rod usingthe small M3 grub screw 2 .
Mounting
1
3
4
5
2
There are three different connectors in two lengths,all of which are available as fixed or adjustable variantsdepending on their intended application. The verticalconnector is attached on or under a carcass element, andthe connector opening is required so that the doors can beslid along the rod.
Horizontal connectors are used to attach rods for the trackrail at the front of the carcass. Sleeve-type connectors areused with stabilising rods and with rods for pivoting doorswith an outboard furniture hinge.
58 11/06
Ordering information
1
Art. No. 8.20.700.700.99
2
Art. No. 8.20.701.700.99
3
Art. No. 8.20.705.700.99
4
Art. No. 8.20.706.700.99
5
Art. No. 8.20.710.700.99
6
Art. No. 8.20.711.700.99
7
Art. No. 8.20.715.700.99
8
Art. No. 8.20.716.700.99
9
Art. No. 8.20.720.700.99
10
Art. No. 8.20.721.700.99
11
Art. No. 8.20.725.700.99
12
Art. No. 8.20.726.700.99
13
Art. No. 8.20.727.700.99
Vertical connectors
Horizontal connectors
Connector, sleeve-type
Connector, double sided
36 mmfixed
50 mmfixed
36 mmadjustable ±2
50 mmadjustable ±3
36 mmfixed
50 mmfixed
36 mmadjustable ±2
50 mmadjustable ±3
321 4
5
6
7
8
36 mmfixed
50 mmfixed
36 mmadjustable ±2
50 mmadjustable ±3
36
16
ø 20
ø20
ø20
M6
16
ø20
ø20
ø20
M6
50
10
9
11
12
13
M6
M6
16
16ø20
ø20
ø20
36ø20
M6
1636
50
ø20
ø20
M6
16
50
M6
ø20
Adjustable angle
16 50
50
11/06 59
MANET AMBIENT Pivoting doors
A feature of the outboard furniture hinge is its right-angleddesign. This is required in order to attach the hinge on theoutside of the carcass (in contrast to an inboard furniturehinge, which is attached inside the carcass, see page 62).A ring is provided within the hinge as a retainer. Insertedplain bearings allow the hinges to pivot about the fixed rod.The outboard furniture hinge permits a door opening angleof up to 270°. The glass thickness is down to a minimum of6 mm, the door weight amounts to a maximum of 40 kg.
Pivoting door, outboard furniture hinge
Hinge
Pivot rod Pivoting door
Carcass
50
50
(48) 36
5
ø 20
max.
270°
LsLs
24
ø 20
40
2 mm
max. 800 mm
Carcass
Carcass
Shelf
Pivoting door
Connector
Glass preparation see page 55
Ls (Hinge distances) = according to weight of pivoting door
Weight of pivoting door ≤ 40 kg Ls = 600 mm
Connector
60 03/07
Outboard furniture hingewith single-point fixingArt. No. 8.20.670.700.99
Outboard furniture hingewithout single-point fixingM6 female threadArt. No. 8.20.675.700.99
Rods and connectorssee page 56 - 59
Rotating the oval-shaped holepermits vertical and lateraladjustment of ± 1 mm oncethe pivoting door has beenmounted.
Hinge fixing device
Components of the pivoting door hingewith single-point fixings
Glass preparation see page 55
Glass
Hinge body
11/06 61
Ordering information
-
MANET AMBIENT Pivoting doors
The inboard furniture hinge is attached inside the carcasswith the insert rod and the inserts.The mechanical design of the inserts enables them to beinstalled in the ready-assembled carcass.The construction allows a door opening angle of 90°.
The glass thickness is down to a minimum of 6 mm,the door weight amounts to a maximum of 40 kg.
Pivoting door, inboard furniture hinge
Furniturehinge
Insert rod
Pivoting door
Carcass
Bottom insert
Top eccentricinsert
50
50
17
6.5
12.6
(43.5)
TTheoreticaldimensionfrom
thebottom
endoftherod
13
13
26
ø 20
2
52 max.
90°
LsLs
24
19
10
ø 20
40
ø 25
2
max. 800 mm
Carcass
Carcass
Shelf
Pivoting door
Glasspreparationsee page 55
Insert rod
ø25
10
4
8
ø 20
ø20Ls (Hinge distances) = according to weight of
pivoting door
Weight of pivoting door ≤ 40 kg Ls = 600 mm
Carcassinsidedimension+6mm
max.3000
62 03/07
Inboard furniture hingewith single-point fixingArt. No. 8.20.660.700.99
Inboard furniture hingewithout single-point fixingArt. No. 8.20.665.700.99
Top eccentric insertArt. No. 8.20.745.700.99
Bottom insertArt. No. 8.20.746.700.99
Insert rodArt. No. 8.20.756.700.99
Installation of insert rod
Carcass preparations
Drill holes as per drawing.Using a wood screw, fix the eccentricinsert with the thin wall to the front inthe hole of the upper shelf.Place the anti-twist insert with the lugparallel with the front in the bottom holeof the bottom shelf and secure with the pins.Use a pin punch to drive thepins home.
Preparing the insert rod
Slide the hinges onto the insert rod.First insert the smooth/unmachined endof the insert rod fully into the top eccentricinsert. Swing the insert rod into thecarcass.Insert the slotted end so that it fits intothe bottom insert.Push the insert rod down with sufficienteffort to conceal the slot.
Installation of glass
Mount and align the glass door with thesingle-point fixings.(Assembly dimension see page 62).
Dismantling of the insert rod
The bottom insert is clamped to the rodand thus prevents unintentional lifting anddisengagement. In order to remove the rod,it has to be raised until a sharp-pointed tool(e.g. a flat-tipped screw-driver) can be placedbetween the insert and the insert rod.The insert can then be levered out.The rod can now be pulled forward anddown to remove it. The glass thickness isdown to a minimum of 6 mm, the doorweight amounts to a maximum of 40 kg.
Carcassinsidedimension
L
Carcass
Installation of insert rod Dismantling of insert rod
Top bore
Carcass
ø20
ø25
13
13
15
13
L = Inside dimension+ 6 mm (max. 3000 mm)
Bottom bore
1
23
1
2
3
03/07 63
Ordering information
MANET AMBIENT Sliding doors
In the MANET AMBIENT system, the roller is attached directlyto the glass. It is aligned via oval-shaped holes in thesingle-point fixing, which is provided with a cap, as are allsingle-point fixings in the system. Accessories such as stopsand brushes complement the range of components.
The glass thickness is down to a minimum of 6 mm,the door weight amounts to a maximum of 40 kg.
Sliding doors
Sliding door Sliding door
Insert withvertical connector
Connector
Insert withhorizontal connector
14.5
19
ø41
47.5
27
min.30
14.5
19
ø41
47.5
27
min.30
Carcass
Sliding door
*2.5
Using the recessedpull grip (Art. No.8.20.900.700.99)the measurementmust be longer than*2.7 mm(see page 70)
Connector
Carcass Sliding door
64 03/07
Ordering information
Roller withsingle-point fixingArt. No. 8.20.650.700.99
Connectordistances
Slotted withbrush profile Roller without single-point
fixing, M6-thread
Art. No. 8.20.655.700.99
Door stopArt. No. 8.20.790.700.99
Rods and connectorssee page 56 - 59
Before installation, slidestop over the rod (freelymovable, clamped usingM5 grub screw)
Slotted carcass withbrush profile
Door stop
Lv
Lh
9
9
ø202
8
12
Installation examples
Glass thickness
Glass thickness +11
Ls (Hinge distances) = according to weight of sliding door
Weight of sliding door ≤ 40 kg Lv/Lh = 600 mm
08/07 65
66 07/06
MANET Accessories
Inhalt
Accessories 68Accessoriesfor AMBIENT 69
Accessories
Installation tools /accessories
Ordering information
Clip-on cover forsingle-point fixingwith spring, 5 piecesArt. No. 8.29.217.700.99
Assembling tool forMANET single-point fixing(can also be used as attach-ment for torque wrench)Art. No. 8.21.137.000.99
Sample caseArt. No. 8.21.995.000.99
MANET Accessories
68 11/06
Ordering information
11/06 69
Shelf support/door stop, sliding doorArt. 8.20.790.700.99
Freely movable,clamped using M5 set screw
Freely movable,clamped using M5 set screw
Shelf support, variableArt. 8.20.801.700.99
Plug-in shelf support/door stop, pivoting doorArt. 8.20.802.700.99
Support for detachable shelf
Swivelling range180°, adjustable
Carcass
Rod
ø20
ø20ø5
ø5
ø 20
28
28
21
9
ø 20
28
9
15.5
3
28 28
21
21
33
8
Plug-in shelf supportroundArt. 8.20.815.700.9925
10
~3
min. 10
min. 10
Ordering information
70 11/06
Flexible head pin wrenchSize ø 20 - ø 35with 2.5 mm pinArt. 8.20.991.000.99
Recessed pull gripfor glassArt. 8.20.900.700.99
Recessed pull gripfor timberArt. 8.20.901.700.99
Insert halves with coating of assembly adhesive
* Dimension greater than glass to carcass distance for sliding doors, see page 64
Special wrench 20 mmArt. 8.20.990.000.99
Recessed pull grip
Special tools for fitting a roller with single-point fixing
Glass preparation
ø41
35
2.7
2.7*
8
During fitting, the surface of this specialthin wrench can be held against the rollerto ensure that the single-point fixing isfirmly screwed down
With the flexible head pin wrenchthe fixing nut of the wall/ ceilingconnector can be screwed
MANET Accessories
71 12/07
Subject to change without notice.
For practical planning, please use our drawings DORMA-Glas DETAIL.
For planning of intelli-gent glass solutionswe offer you several
planning tools which allow youto create secure and professio-nal solutions for any kinds ofglass doors and toughend glassassemblies.
The planning tools DGES andMANET COMPACT enable youto prepare designs and costcalculations quickly, reliablyand professionally. The soft-ware provides you with allnecessary documentation suchas dimensioned technicaldrawings, glass sizes and pre-paration measures.
Your benefits:• Easy to operate• Professional and error-freepreparation of offers
• Rapid response to incomingrequests for quotations
• Highly reduced planningcosts for time and moneysavings
DGES Fittings(for internal doors and toug-hend glass assemblies),Art. No. 800.51.249.6.32DGES HSW (forhorizontal sliding walls),Art. No. 800.51.247.6.32DGES Showers(for glass shower cubicles),Art. No. 600.51.600.9.03MANET COMPACT planningtool(for MANET pivoting andsliding doors),Art. No. 800.51.329.6.32
Planning tool
WN 800.51.221.6.32 · 02/08 · GB · BD · 3 · 12/07
DORMA GlasTec GmbHLeonardo-da-Vinci-Weg 6 - 8D-32760 DetmoldTel. +49 5231 308030Fax +49 5231 3080310www.dorma-glastec.de