techno research - asset.lemansnet.com

THE DRAG SPECIALTIES

APRIL 2016dragspecialties.com

PART # DESCRIPTION SUG. RETAIL3807-0378 O2 Installation kit $594.95

• Monitors both cylinders simultaneously

• Measures exhaust gas correctly

• Prevents reversion air and false lean readings

• Fast, accurate readings with almost no delay

• Easy installation with no welding required

• Compatible with Dynamometer or Portable Data Logger

• When finished, heat shields cover seal screws to maintain original look

O2 INSTALLATION KIT• Kit is comprised of two O2 sampler

blocks, an exhaust port jet, two five-foot exhaust hoses and special attachment bolts

• Bolts consist of 25 Rivnuts, seal screws and seal washers

• One hydraulic insertion tool (with case) and one drill bit included for installation

• When combined with a set of wideband O2 sensors, the O2 installation kit allows you to get the most accurate readings so you can get the best possible results out of your tune

• No pump or sampling tube required

TECHNO RESEARCHJust about a year ago we welcomed Techno Research

onboard with their unique tuning and diagnostic products

available for any size shop and service level. We know many

of you got to meet this team at shows and rallies around the

country where you learned how to save time and make more

money using their latest products. If you have not gotten to

meet them yet, we suggest you get to a show soon and be

ready for Spring tuning.

PART # DESCRIPTIONSUG.

RETAIL1802-0326* For 09-16 FLHT, FLHR, FLHX, FLTRX models $399.95

CHROME 2X2 DUAL HEADPIPES

• 1¾" headpipes with 18mm and 12mm O2 ports

• 2x2 design allows fitment of stock heat shields

• Advanced inner collector for maximum performance

• Made to fit with stock slip-on mufflers or Bassani Xhaust slip-on mufflers

• Made in the U.S.A.

*DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES

2


APRIL 2016

PART # DESCRIPTION SUG. RETAILFOR 95-16 FLT, FLHT, FLHX, FLTR, FLHR AND H-D FL TRIKE MODELS (EXCEPT 15-16 FLRT)1801-0898 Chrome $499.951801-0899 Chrome w/ black end caps 499.951801-0900 Matte black 499.95

4" ELIMINATOR 400 SLIP-ON MUFFLERS• Large 4" round mufflers are finished with race-inspired CNC

machined billet end caps

• Tuned to give 95 and later Baggers a deep and aggressive roar

• Available in chrome, chrome with black tip or matte black

• Sold in pairs


1801-0900

1801-0899

1801-0898

PART # DESCRIPTION SUG. RETAIL1801-0901 For 97-03 FLSTS and 05-07 FLSTSC $599.95

3" LONGTAIL MUFFLERS FOR SPRINGER SOFTAIL• 29" Longtail mufflers with baffles

• Mount to OEM bracket

• Sold in pairs


PART # DESCRIPTION SUG. RETAIL1801-0902 27" Longtail mufflers $599.95

2¼" MUFFLERS FOR SOFTAILS WITH TRUE DUAL CROSSOVER HEADERS• 27" Longtail mufflers for use with Samson’s 1¾" True Dual crossover headers

PART #s 1800-1191, 1800-1192, 1802-0203, 1802-0220 or 1802-0221

• Finished with Samson’s exclusive Quad Chrome

• Clean, “seamless” transition between headers and mufflers

• Sold in pairs; include integrated baffles and work only with True Dual Crossover Headers


NOTE: Will not interchange with OEM components.

3

PART # DESCRIPTION SUG. RETAIL

1007-0402* Master jet kit for Super B, E and G carbs

$80.95

MASTER JET KIT FOR S&S CARBS• For jetting all Super B, E and G carbs

• Contains one of all intermediate jets (.025, .0265, .028, .0295, .031, .032, and .033 inch) and one of all main jets (.062, .064, .066, .068, .070, .072, .074, .076, .078, .080, .082, and .084 inch)


TSPART # DESCRIPTION SUG. RETAIL

1003-0453 Master rebuild kit Super A and B carb

$69.95

MASTER CARBURETOR REBUILD KIT• Kit includes body, accelerator pump, fasteners, springs,

idle mixture screw, seat and needle assembly


PART # DESCRIPTION SUG. RETAIL1001-0045* For 36-84 Big Twin and 57-85 XL models w/ standard tank $514.95

SUPER E PARTIAL CARBURETOR KIT• Includes an S&S Super E gas carburetor

and S&S teardrop air cleaner assembly

• Super E has a 17⁄8" throat at the butterfly and a 19 ⁄16" venturi and is recommended for use on Big Twin or Sportster engines up to 100-cubic-inch

• Manifold and mounting hardware not included; must be purchased separately

NOTE: S&S Super E carburetors require the use of a two-cable, pull open/ pull close throttle assembly.

NOTE: 36-65 Models will require a 1" spacer block to clear external oil line (sold separately).

PART # DESCRIPTION SUG. RETAILFOR 95-16 FLHT/ FLHR/ FLHX/ FLTR MODELS W/ NON-CATALYST MUFFLERS (EXCEPT 10 FLHX/ FLTRX/HD FL TRIKE MODELS)1801-0906* Chrome with black Xylan® coated end caps $779.951801-0907* Chrome with chrome end caps 779.95

• Mufflers offered in show quality chrome finish with chrome or black Xylan® coated end caps

• Sold in pairs


• One-of-a-kind styling and sound

• Big block rumble, but not too loud when cruising down the road

• Significant torque gains in the mid-range, just where you need it

• Double-walled muffler construction with insulation that virtually prevents blueing

SPO® TOURING MUFFLERS

PART # DESCRIPTION SUG. RETAIL1003-0452 Carburetor bowl assembly $70.95

REPLACEMENT CARB COMPONENTS• For Super E and G carburetors

1801-0906

1801-0907

*DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES

4


APRIL 2016

PART # DESCRIPTION SUG. RETAIL2010-1271 Chrome $264.952010-1272 Gloss black 264.95

BILLET LICENSE PLATE FRAMES WITH LIGHT• Constructed of billet aluminum

• LED tag light

• Accept most 4" x 7" license plates

• Hidden mounting hardware

• License plate frame works perfectly in the Misfit Steel Rear Fender


2010-1271

2010-1272

PART # DESCRIPTION SUG. RETAILFOR 84-16 TOURING MODELS, 86-16 SOFTAIL MODELS1601-0459 Chrome $199.951601-0460 Black 199.95

AMBUSH SERIES SHIFT LINKAGE• Constructed of CNC billet aluminum

• Pressed in spherical bearings for a clean look

• Mounting holes are 12" center-to-center

• Hardware included

• Matching foot control kit, front boards,passenger pegs/ boards, bag latches and turn signal delete plates sold separately


1601-0459

1621-0710 Left-Side

1621-0710 Right-Side

1601-0460

PART # DESCRIPTION SUG. RETAILFOR 14-16 FLHT, FLHR, FLHX, FLTRX MODELS1621-0716 Chrome $699.951621-0717 Gloss black 699.95FOR 11-13 FLHT, FLHR, FLHX, FLTRX MODELS1621-0714 Chrome 699.951621-0715 Gloss black 699.95FOR 08-10 FLHT, FLHR, FLHX, FLTR MODELS1621-0712 Chrome 699.951621-0713 Gloss black 699.95FOR 97-07 FLT, FLHT, FLHR, FLHX, FLTR MODELS1621-0710 Chrome 699.951621-0711 Gloss black 699.95

AMBUSH SERIES FOOT CONTROLS• Constructed of CNC billet aluminum

• Include adjustable brake arm with serrated toe peg, single-arm shifter lever with serrated toe peg, inner shaft rod lever and shifter shaft

• Required hardware included

• Matching floorboards, rear boards, passenger pegs, bag latches and turn signal delete plates sold separately

• Made in the U.S.A

1621-0716

5

AMBUSH SERIES PASSENGER PEGS

• Constructed of CNC billet aluminum

• Feature 45° male mounts

• Serrated comfort grip design

• Measure 5” x 1.5”

• Fit most bikes with passenger footpeg mounts

• Sold in pairs


PART # DESCRIPTION SUG. RETAIL1620-1563 Chrome $239.951620-1564 Gloss black 239.95

1620-1563

1620-1564

PART # DESCRIPTION SUG. RETAILFOR 84-16 FLT, FLHT, FLHR, FLHX, FLTR, 09-13 H-D FL TRIKE, 86-16 FLST, 12-16 FLD MODELS1621-0718 Driver, chrome $699.951621-0719 Driver, gloss black 699.951621-0720 Passenger, chrome 599.951621-0721 Passenger, gloss black 599.95

AMBUSH SERIES FLOORBOARDS

• Constructed of CNC billet aluminum

• Serrated comfort grip design

• Driver floorboards measure 14.25" X 5.5"

• Hardware included

• Matching Foot control kits, rear pegs, bag latches and turn signal delete plates sold separately


NOTE: FLST/ FLD models with passenger footpegs will require the use of OEM accessory passenger floorboard mounts.

1621-0721

1621-0718

PART # DESCRIPTION SUG. RETAIL1624-0306 For 98-16 FLTR/ FLTRX $449.95

FRONT TWINBAR®

• Patented Twinbar combination engine guard with highway pegs is engineered with the rider’s comfort in mind

• Sleek, triple-chrome-plated designs

• Constructed from 1¼" o.d. tubing and features flip-down pegs that allow riders to adjust riding positions

• Easily installed with included hardware

U.S. Patent #D521412S

U.S. Patent #6.981.713B2

U.S. Patent #7.083.181B2

NOTE: Not recommended for use with extended forward controls.

6


APRIL 2016


FOR 14-16 XL MODELS

1623-0340 Contrast Cut $599.951623-0341 Black Ops 599.95

1623-0341

1623-0340


0411-0134For 04-16 XL w/ clip-on handlebars (except XL1200X, 11-16 XL1200C, XL883L)

$159.95

SPORTSTER MID-CONTROLS• Move foot position approximately 1" up, 1" back and 1.5" narrower per side for

increased ground clearance when cornering

• Utilize OEM rear master cylinder and shift lever

• Designed to fit seamlessly with RSD slant 2-into-1 exhaust system

• Eliminates bulky, heavy OEM cast steel foot peg brackets, bell crank brake rod and master cylinder bracket

• Available in Contrast Cut™ or Black Ops™

• Contrast Cut™ finish starts with a polished mid-control that has been black anodized, then recut to open up the design

• Black Ops™ is perhaps the toughest yet, featuring a gloss black on top of a contrasting textured black finish


UPPER FORK TUBE COVERS FOR RSD CLIP-ONS• CNC machined billet aluminum

• Slide over OEM fork tubes to black out the exposed fork area between triple clamps

• 5¾" length allows for use with RSD clip-ons

• Gloss black finish

• Sold in pairs



2210-0408 For 14-16 XL (except 1200X, 1200V, 11-16 1200C)

$63.95

LED INDICATOR LIGHT KIT FOR RSD CAFE GAUGE & HEADLIGHT RELOCATORS• Keeps your indicator light functionality with a LED unit when using

the RSD café gauge and headlight re-locator

• Five LED lights in one arc-shaped weatherproof unit allow all OEM warning and indicator functions (Outer Green: L&R Turn indicators; Red: Oil Pressure; Blue: High Beam and Center; Green: Neutral)

• 12" long wiring lead

• Wire insulation color matched to OEM wiring for ease of installation

• Wires must be soldered and heat shrunk to OEM harness


NOTE: Not compatible with OEM gauge mount.

7


2112-1130 For 00 Softtail; 29A at 2500 rpm

$462.95

2112-1128 For 09-13 XL 883; 27A at 2500 rpm 529.95

2112-1129For 09-13 XL 1200, 08-12 XR 1200; 27A at 2500 rpm

529.95

2112-1126 For 07-08 XL 883; 27A at 2500 rpm 529.95

2112-1127 For 07-08 XL 1200; 27A at 2500 rpm 529.95

2112-1125 For L84-90 XL; 19A at 2500 rpm 1,046.95

CYCLE ELECTRIC ALTERNATOR KITS• Kits include stator, rotor, black rectifying

voltage regulator and mounting hardware


NOTE: Adding electrical accessories increases amperage usage. When doing so, it is important to consider amperage ratings of switches and wires. If you draw too many amps through a switch or wire, it will heat up and may burn. Fuses and breakers are sized to protect wiring and switches. DO NOT CHANGE 30A MAIN BREAKER TO A 50A BREAKER. THE SWITCHES AND WIRING WILL NOT BE PROTECTED.


2060-0535 H4-style LED headlight bulb

$69.95

H4-STYLE LED HEADLIGHT BULB

• Replaces all H4-style headlight bulbs

• Uses stock reflector and bulb housing

• 6000K (6000 Kelvin) daylight white (not yellow) light beam with no blue tint

• Built-in ballast with active heat-management fan

• Offers a super bright 2000 lumen LED output (versus standard H4 lumen output of 800-1200 lumens)

• Draws less than 1 amp compared to stock bulb at 5 amps

• Easy do-it-yourself plug-cand-play installation

• Kit includes several different mounting adaptors to fit 90 percent of all motorcycle models

• 20,000 hour bulb life

NOTE: Not DOT compliant.


2060-0507 LED 881 passing lamp bulbs

$79.95

LED PASSING LAMP BULBS

• Convert stock driving lamp bulbs to high-performance LED lighting

• Direct replacement for 881-style passing lamp bulbs

• Shine at 6000K

• 420 lumens per bulb

• Use Cree LEDs (11 watt) for a pure white color with no yellow tint like standard halogen bulbs

• Measure .492" x 1.870"

• Plug-n-play installation

• No modules or special resistors needed

• Sold in pairs

2112-1130

2112-1127

2112-1125

PART # DESCRIPTION SUG. RETAILFOR 07-16 BIG TWIN, 06 DYNA GLIDE2110-0588 Chrome $447.952110-0589 Black 447.95

SLUGGER 1.8kW HIGH-TORQUE STARTER MOTORS• Starters are assembled in the U.S.A.

with heavy-duty components and tested with state-of-the-art equipment

• Starter offers superior windings, high-tolerance heavy-duty clutch and a thicker commutator that resists flying shorts

• 1.8kW output has the torque to start any monster motor with the least amount of amperage drain

• Static balanced for smoother operation

• Low-profile design will clear the electronic speedometer sensor for easy installation

• Starters are longer than stock but require no modifications to bike for a perfect fit

2110-0588

2110-0589

8


APRIL 2016

ON BOARD POWER PORT AND Y ADAPTER

• Plugs into on-board diagnostic port

• 100% plug-n-play

• Acts like a cigarette lighter port in your automobile; works great for powering and charging accessories while riding

• Y adapter gives you two available ports to tap for 12V switched power


2120-0840

2120-0811

2120-0810

2120-0841

2020-12122020-1210


2120-0840Electronic Throttle Control extension for 16 FLHT/ FLHR/ FLTRX/ FLHX and 16 Softail models

$44.95

2120-0841Handlebar controls extension kit for 16 FLHT/ FLHR/ FLTRX/ FLHX and 16 Softail models

89.95

HANDLEBAR EXTENSION WIRING KITS

• Saves time by streamlining handlebar wiring jobs

• Kits include all the materials necessary to extend the wires for hand controls and Throttle By Wire controls (sold separately)

• Terminals crimped on one end

• Cut-to-length design will accommodate up to 20" Ape Hanger handlebars

• Includes OEM color matching wires and heat shrink


PART # DESCRIPTION SUG. RETAILFOR 11-16 SOFTAIL, 12-16 DYNA, 14-16 ALL MODELS W/ CAN-BUS2120-0811 Power port/ plug $19.952120-0810 Y adapter 23.95

LED WRAP-AROUND TURN SIGNALS

• 30 super-bright amber LEDs per side

• Available with the choice of a clear or smoke lens

• T06061 billet aluminum housings in chrome or gloss black finish

• Available for: 39mm, 41mm, 43mm and 49mm forks

• Sold in pairs


NOTE: Load equalizer may be required.

PART # FINISH LENS SUG. RETAIL39MM2020-1210 Chrome Clear $259.952020-1211 Chrome Smoke 259.952020-1212 Black Clear 259.952020-1213 Black Smoke 259.9541MM2020-1214 Chrome Clear 259.952020-1215 Chrome Smoke 259.952020-1216 Black Clear 259.952020-1217 Black Smoke 259.9543MM2020-1218 Chrome Clear 259.952020-1219 Chrome Smoke 259.952020-1220 Black Clear 259.952020-1221 Black Smoke 259.9549MM2020-1222 Chrome Clear 259.952020-1223 Chrome Smoke 259.952020-1224 Black Clear 259.952020-1225 Black Smoke 259.95

• Direct replacement for most 7" headlights

• Superior visibility, safety and durability

• 1150 lumen output (high beam), 750 lumen output (low beam)

• DOT compliant

• Easy, plug-n-play H4-style connector

MODEL 8700 EVOLUTION 2 7" ROUND LED HEADLAMP KIT

• Includes mount kit for Dresser applications


PART # DESCRIPTION SUG. RETAIL2001-1277 Black $449.952001-1278 Chrome 449.95

2001-1278

2001-1277

Dresser Mount Kit

9

SEMI-METALLIC PAD PART # OEM # DESCRIPTION SUG. RETAILFRONT BRAKE PADS1721-2259 41300072 For 15-16 XG $24.95REAR BRAKE PADS1721-2259 41300072 For 15-16 XG 24.95

BRAKE PADS• Semi-metallic brake pads are a pad choice between sintered metal

or organic brake pads

• Offer greater stopping power and long wear

• Asbestos, nickel, and lead free

• Available for front and rear applications

PART # DESCRIPTION SUG. RETAILFOR 14-16 INDIAN CHIEF, CHIEFTAIN, ROADMASTER0712-0479 Black $7.950712-0480 Chrome 9.95

OIL FILTERS• High-quality spin-on filters

• A dependable replacement for OEM

• Available in chrome or black

PART # FITS MODEL SUG. RETAIL

1710-3065 For 09-12 FLHTCUTG, FLHXXX; repl. OEM #83425-09

$118.95

REAR BRAKE ROTOR• High-quality cast iron construction

with a ground finish

• Designed for use with OEM or aftermarket brake calipers

• Exact replacement for the OEM rotors

• Sold each; two required

NOTE: It is recommended the brake rotors be replaced in pairs.

DRAG SPECIALTIESAs most of you know, we do not often sound our own horns in here. But

every now and then we like to remind everyone that if a product has the Drag

Specialties brand on it, both you and your customer can rest assured that for

quality and value there is nothing better. We’re also aware that value means

nothing if you can’t get the Drag products your customers want. That’s why

we carefully plan, stock and quickly ship using our state-of-the-art warehouse

network. We invite you to take a look at some of our own latest offerings, all

backed by the Drag name.

PART # DESCRIPTION SUG. RETAILCHROME1621-0722 3" Footboards $125.951621-0724 4" Footboards 125.95GLOSS BLACK1621-0723 3" Footboards 125.951621-0725 4" Footboards 125.95

• 4" boards measure approximately 3½" L x 4" W

• Sold in pairs

NOTE: Will not fit 13-16 FXSB/SE, 11-13 FXS, 08-11 FXCW/C, 13-16 XL1200V/ XL1200X/ XL1200C models.

FOOTBOARDS• Steel construction with a chrome or

black powdercoat finish

• Rubber pads isolate the foot from vibration and add comfort on long rides

• Splined male mounts allow you to adjust the angle of the footboards to the ideal position

• 3" boards measure approximately 2¾" L x 4" W

1621-0722

1621-0725

0712-04791721-2259

10


APRIL 2016

SADDLEMEN is owned and staffed by riders

of all types and persuasions. Their experience with all forms

of motorcycling along with what they learn from other

enthusiasts is incorporated into the products they research

and develop every day. They like to point out that their great-

performing products all feature superior craftsmanship

and materials along with built-in value. Your customers will

appreciate the fact that they can be rolling in style without

running out of cash.

PART # DESCRIPTION SUG. RETAIL6" PADS0807-0168 Dominator $155.000807-0171 Knuckle 155.000807-0174 Lariat 165.000807-0177 S3, Standard Saddlehyde™ 155.000807-0180 S3, Element-resistant distressed Saddlehyde™ 155.007" PADS0807-0169 Dominator 155.000807-0172 Knuckle 155.000807-0175 Lariat 165.000807-0178 S3, Standard Saddlehyde™ 155.000807-0181 S3, Element-resistant distressed Saddlehyde™ 155.009" CONTOUR PADS0807-0170 Dominator 160.000807-0173 Knuckle 160.000807-0176 Lariat 173.000807-0179 S3, Standard Saddlehyde™ 160.000807-0182 S3, Element-resistant distressed Saddlehyde™ 160.00

PHANTOM PADS• One of the most comfortable, lowest profile

and best looking seats on the market

• Phantom pads deliver looks and comfort that have made Saddlemen a household name for motorcycle riders everywhere

• Each pad is engineered with a sturdy PE foundation: a layer of highly resilient foam combined with a layer of memory foam

• The rugged, but compliant, cover works to keep riders and passengers comfortable for long stretches of highway time

• Each pad attaches easily and securely with its limited-lifetime warranted, unique dry-installation, dual-cavity suction cup and can be removed just as easily using the built-in quick release pull tab

• The pads’ non-abrasive liner also ensures your expensive rear fender paint job is protected during attachment or removal

• Available in three sizes: 6" (1¾" H x 6" W x 10" L), 7" (1¾" H x 7" W x 10" L) and 9" Contoured (1¾", 9" W x 10" L in four styles


• Dominator combines leading-edge styling with comfort enhancing Gel Channel technology for a truly unique seat that looks and feels great

• Knuckle is engineered to brashly transform your bike with its deep, aggressive ribs that are carefully stitched into element-resistant distressed Saddlehyde™ cover

• Lariat is covered in genuine distressed brown leather; it’s as close to having a true western horse saddle as you can get

• The S3’s fit and finish matches its street-smart looks with two cover options to choose from: Standard Saddlehyde™ and element-resistant distressed Saddlehyde™ cover

0807-0168

0807-0176

0807-0181

0807-0172

0807-0177

11

1621-0731

1610-0477

1620-1601

1603-0305

1621-0733

PART # DESCRIPTION SUG. RETAILFOR 80-16 FLT/ FLTR/ FLHT/ FLHR/ FLHX, 09-13 H-D FL TRIKES, 12-16 FLD ORIGINALLY EQUIPPED W/ FLOORBOARDS1621-0731 19" Banana boards $311.951621-0732 14" Banana boards 224.95FOR 94-16 FLT/ FLTR/ FLHT/ FLHR/ FLHX, 09-13 H-D FL TRIKES, 12-16 FLD ORIGINALLY EQUIPPED W/ FLOORBOARDS1621-0733 Rear board covers 169.95FOR 84-16 FLT/ FLTR/ FLHT/ FLHR/ FLHX, 09-13 H-D FL TRIKES, 12-16 FLD ORIGINALLY EQUIPPED W/ FLOORBOARDS1610-0477 Brake pedal cover 83.95OPTIONAL PEGS1603-0305 Banana shifter peg (ea.) 76.951620-1601 Male-mount footpegs (pr.) 185.95

• Trademark curved design features machined billet aluminum with black rubber inserts

• Provide style and proven long-haul comfort

• Easy installation using stock mounts

• Gloss black finish with bright finish rivets

• Optional matching banana shifter pedals, rear board covers, footpegs, and brake pedal covers available separately


BANANA BOARDS

PART # DESCRIPTION SUG. RETAILFOR 14-16 FLHT/ FLTRX/ FLHX/ FLHTCUTG2106-0369 Platinum Cut, chrome $67.952106-0370 Platinum Cut, black anodized 67.952106-0373 Cross Cut, chrome 67.952106-0374 Cross Cut, black anodized 67.95FOR 93-06 FLT/ FLHT/ FLTR/ FLHX2106-0367 Platinum Cut, chrome 67.952106-0368 Platinum Cut, black anodized 67.952106-0371 Cross Cut, chrome 67.952106-0372 Cross Cut, black anodized 67.95

IGNITION SWITCH COVER• Fits over stock ignition

switch and is attached with a setscrew

• Made of CNC-machined 6061 T-6 aluminum

• Available in either chrome or black anodized finish


PART # DESCRIPTION SUG. RETAILFOR 07-16 FLHT/ FLHX/ FLHR/ FLTR/ FXST/ FLST, 06-16 FXD/ FXDWG1105-0178 Chrome $326.951105-0179 Black anodized 326.95

TRANSMISSION TOP COVERS• CNC-machined from

6061 billet aluminum

• Platinum cut design matches other Eddie Trotta parts

• Available in a black anodized or chrome finish


1105-0178

2106-0370

2106-0367

2106-0373

2106-0372

1105-0179


APRIL 2016

12 9901-1837

99011837

3501-1119

3501-1120

PART # DESCRIPTION SUG. RETAIL3501-1121 Ventura bolt-on saddlebags $435.00

PART # DESCRIPTION SUG. RETAIL3501-1119 Plain $345.503501-1120 Studded 410.00

MONTANA BOLT-ON SADDLEBAGS

• Constructed with premium leather for unmatched quality, durability and style

• Bags must be used in conjunction with a hard mount or detachable bracket system (sold separately)

• In order to ensure multiple models and style fitments, bolt-on bags are not pre-drilled

• Measure 13.5" L x 11.5" H x 7.5" W

• Sold in pairs


Note: Saddlebag supports are recommended for all saddlebags.

• Measure 16" L x 11" H x 7.5" W

• Sold in pairs


Note: Saddlebag supports are recommended for all saddlebags.

VENTURA BOLT-ON SADDLEBAGS




PART # DESCRIPTION SUG. RETAIL3501-1122 Plain $495.003501-1123 Studded 525.00

MIGHTY LEGEND BOLT-ON SADDLEBAGS




• Measure 18" L x 12" H x 8" W

• Sold in pairs


Note: Saddlebag supports are recommended for all saddlebags

3501-1122

3501-1123

techno research - asset.lemansnet.com

Documents