technology blog 2

6/13/13 Technology Blog

taktiktek.blogspot.com/search?updated-min=2010-12-31T09:00:00-08:00&updated-max=2011-11-16T14:53:00%2B07:00&max-results=43&start=6&by-date=false 1/16

R a b u , 1 6 N o v e m b e r 2 0 1 1

Diposkan oleh Admin di 14.23 Tidak ada komentar:

3G Handover Types

Intra-Frequency Handovers

1. Softer Handover

Handover between sectors of the same Node B (handled by BTS)

No extra transmissions across Iub interface

Maximum Ratio Combining (MRC) is occurring in both the UL & DL

2. Soft Handover

UE simultaneously connected to multiple cells (from different Node Bs)

Extra transmission across Iub, more channel cards are needed (compared to non-SHO)

Mobile Evaluated Handover (MEHO)

DL/UE: MRC & UL/RNC: Frame selection combining

3. Hard Handover

Arises when inter-RNC SHO is not possible (Iur not supported or Iur congestion

Decision procedure is the same as SHO (MEHO and RNC controlled)

Causes temporary disconnection of the (RT) user

Inter-Frequency Handover

Can be intra-BS, intra-RNC, inter-RNC

Network Evaluated Handover (NEHO)

Decision algorithm located in RNC

Inter-RAT Handover

Handovers between WCDMA and GSM (NEHO) or GAN (WLAN)

Rekomendasikan ini di Google

S e n i n , 1 4 N o v e m b e r 2 0 1 1

RRC connection request

Cari

Search :.

Home

Disclosure Policy

Laman :.

2013 (1)

2012 (14)

2011 (43)

Desember (1)

November (17)

Export data Nemo to Mapinfo

FMCS Parameter

HOPS Parameter

ADJS Parameter

3G HO Basic reporting events

3G Handover Types

RRC connection request

How to avoid ping pong (3G -GSM)

2G -> 3G Cell Re / Selection

3G --> 2G Cell Re / selection

RAB setup failures for CS voicecalls

Portable Google_Earth

RAB setup failures for PS calls

RRC active failures

RRC access failures

RRC setup failures

Save As PDF

Oktober (19)

Juli (6)

Arsip Blog :.

0Bagikan Lainnya Blog Berikut Buat Blog Masuk




If admission control rejects the RRC connection request, the RNC sends the RRC: RRC Connection Reject

message to the UE. The message includes mandatory IE Wait time.

The user equipment waits at least the time stated in the parameter before sending a new RRC: RRC Connection

Request message. The value of the Wait time is defined with the Wait time in RRC connection request rejection

(WaitTimeRRC) management parameter.



How to avoid ping pong (3G - GSM)

When UE is camped on 3G -> GSM measurements start when CPICH Ec/Io of serving cell is below Ssearch_RAT +

QqualMin

When UE is camped on GSM -> cell reselection to 3G is possible if CPICH Ec/Io of the candidate is above

FDD_Qmin

FDD_Qmin >= QqualMin+Ssearch_RAT


J u m a t , 1 1 N o v e m b e r 2 0 1 1

2G -> 3G Cell Re / Selection

QsearchI (A_BTS)

With this parameter you define the threshold for dual mode mobiles in idle state to search for and to measure

UTRAN neighbour cells introduced in 3G Cell Reselection list when a running average of the received downlink

signal level (RLA_C) of the serving cell is below (0-7) or above (8-15) the threshold. This parameter is broadcast

only on BCCH.

If the parameter value is 7, dual mode mobiles in idle state measure always neighbour UTRAN cell(s). If the

parameter value is 15, dual mode mobiles in idle state do not measure any of the neighbour UTRAN cells.

GPRS-capable mobiles do not use this parameter if NCCR is active in the serving cell

QsearchP (A_BTS)

With this parameter you define the threshold for GPRS capable dual mode mobiles to search for and to measure

UTRAN neighbour cells introduced in 3G Cell Reselection list when a running average of the received downlink

signal level (RLA_C) of the serving cell is below (0-7) or above (8-15) the threshold.




This parameter is broadcast on BCCH.

In case this parameter is broadcast on BCCH it shall be used only if GPRS cell re-selection parameters for one or

more cells are sent to the MS in a Packet Cell Change Order or Packet Measurement Order message

If the parameter value is 7, GPRS-capable multi-RAT MSs measure always neighbour UTRAN cell(s). If the

parameter value is 15, GPRS-capable multi-RAT MSs do not measure any of neighbour UTRAN cells.

GPRS-capable mobiles use this parameter only if NCCR is active in the serving cell

fddQOffset (A_BTS)

With this parameter you define a UTRAN cell reselection offset for non-GPRS capable dual mode mobiles which

are in the idle state.

The mobiles add the offset to the running average (RLA_C) of the received signal level of the serving GSM cell

and non-serving GSM cells. After that the mobiles compare the measured RSCP values of UTRAN cells with signal

levels of the GSM cells.

-32 db = minus infinity dB

range: -28..28 dB, step 4 dB

FDD_GPRS_Offset

FDDQmin (A_BTS)

This parameter defines a minimum Ec/Io threshold which must be exceeded before a non-GPRS capable dual

mode mobile is allowed to make a reselection from the serving GSM cell to an adjacent WCDMA RAN cell that is

using frequency division duplex (FDD) type access technology/mode

FDD_REP_QUANT

defines the reporting quantity for UTRAN cell

3G_Search_PRIO

Is used to inidicate to the MS if 3G cells can be looked for when BSIC decoding is required. (0=no, 1=yes, default:

1)


K a m i s , 1 0 N o v e m b e r 2 0 1 1

3G --> 2G Cell Re / selection

Cell Re / selection Criteria S di define sbb :

Squal = Qqualmeas Qqualmin

Srxlev = Qrxlevmeas - Qrxlevmin - Pcompensation

Dimana :

Squal : Cell Selection quality (dB)

Qqualmeas : Measured cell quality value

Qqualmin : Minimum required quality level in the cell (dB)

Srxlev : Cell Selection RX level value (dB)

Qrxlevmeas : Measured cell RX level value

Qrxlevmin : Minimum required RX level in the cell (dBm)




Pcompensation : max(UE_TXPWR_MAX_RACH P_MAX, 0) in dB

"UE_TXPWR_MAX_RACH" : Maximum TX power level an UE may use when accessing the cell on RACH (dBm)

P_MAX : Maximum RF output power of the UE (dBm)

Cell Re / selection Criteria S akan terpenuhi jika :

Squal > 0

Srxlev > 0

Asumsi tidak menggunakan HCS maka :

If Squal > Sintrasearch, UE need not perform intra-frequency measurements

If Squal Sintersearch, UE need not perform inter-frequency measurement

If Squal SsearchRAT m, UE need not perform measurements on cells of RAT "m"

If Squal 2G adalah :

HCS_PRIO : Defines the HCS priority level for a cell (def:0) (A_WCEL)

NCr : Defines the maximum number of cell reselections (def:8) (A_WCEL)

QHCS : Quality threshold level for applying prioritised hierarchical cell re-selection for a cell (def:WCDMA : -24)

(A_WCEL)

Qhyst1 : Qhyst1 is used for TDD and GSM cells, and for FDD cells when cell selection and re-selection quality

measure is set to CPICH RSCP (def:4) (A_WCEL)

Qhyst2 : Qhyst2 is used for FDD cells when cell selection and re-selection quality measure is set to CPICH Ec/No

(def:4) (A_WCEL)

QqualMin : The minimum required quality level in the cell (Ec/No) (def:-20) (A_WCEL)

QrxlevMin : The minimum required RX level in the cell (def: WCDMA -115, GSM -105) (A_WCEL)

SHCS_RAT : The RAT specific threshold for inter-RAT measurement rules (def:1) (A_WCEL)

Sintersearch : The threshold for inter-frequency measurements, and for the HCS measurement rules (def:2)

(A_WCEL)

Sintrasearch : The threshold for intra-frequency measurements, and for the HCS measurement rules (def:4)

(A_WCEL)

Slimit_SearchRAT : Threshold for skipping inter-RAT measurement rules in HCS (def:2) (A_WCEL)

Ssearch_RAT : The RAT-specific threshold for inter-RAT measurement rules (def:0) (A_WCEL)

SsearchHCS : Threshold for intra- and interfrequency measurement rules in HCS (def:1) (A_WCEL)

TCrmax : The duration for evaluating the allowed amount of cell reselections (def:60sec) (A_WCEL)

TCrmaxHyst : Cell reselection hysteresis for reverting from UE high-mobility measurements (def:0sec) (A_WCEL)

Treselection : The UE triggers the reselection of a new cell if the cell reselection criteria are fulfilled during the

time interval Treselection (def:0) (A_WCEL)

UseOfHCS : Indicates whether the serving cell belongs to a Hierarchical Cell Structure (HCS), or not (def:0)

(A_WCEL)




RAB setup failures for CS voice calls

RAB SETUP FAILURES DUE TO BTS FOR CS VOICE

NetAct name: RAB_STP_FAIL_CS_VOICE_BTS

Description: The number of RAB setup failures caused by BTS for CS voice.

When the RAB assignment fails due to radio link setup or reconfiguration failure. The failure can happen either

in the Iub or in the Iur interface.

RAB SETUP FAILURES DUE TO TRANSPORT FOR CS VOICE

RAB_STP_FAIL_CS_VOICE_TRANS

Description: The number of RAB setup failures caused by transport for CS voice.

When the RNC decides to reject the CS voice RAB request due to transport failure. This happens before the RRC:

RADIO BEARER SETUP message would be sent to the UE

RAB SETUP FAILURES DUE TO RNC FOR CS VOICE

NetAct name: RAB_STP_FAIL_CS_VOICE_RNC

Description: The number of RAB setup failures caused by RNC for CS voice.

When the RNC decides to reject the CS voice RAB request due to RNC internal failure. This happens before the

RRC: RADIO BEARER SETUP message would be sent to the UE

RAB SETUP FAILURES DUE TO FROZEN BTS FOR CS VOICE

NetAct name: RAB_STP_FAIL_CS_VOICE_FROZBS

Description: The number of RAB setup failures caused by frozen BTS for CS voice.

When the RNC decides to reject the CS voice RAB request because the admission control entity blocks the radio

link establishment to ensure the setup of high priority calls. This happens before the RRC: RADIO BEARER SETUP

message would be sent to the UE.

RAB SETUP FAILURES DUE TO IUB AAL2 TRANS FOR CS VOICE

NetAct name: RAB_STP_FAIL_CS_V_IUB_AAL2

Description: The number of RAB setup failures caused by Iub AAL2 transport resource shortage for CS voice.

When the RNC decides to reject the CS voice RAB request due to Iub transport resource shortage between RNC

and WBTS. This happens before the RRC: RADIO BEARER SETUP message is sent to the UE

RAB SETUP FAILURE CS VOICE WPS

NetAct name: RAB_STP_FAIL_CS_VOICE_WPS

Description: The number of RAB setup failures for CS voice calls using Wireless Priority Service. Also some other

RAB SETUP FAILURE counter is updated along with this counter.

RAB SETUP FAILURES DUE TO AC FOR CS VOICE

NetAct name: RAB_STP_FAIL_CS_VOICE_AC

Description: The number of RAB setup failures caused by admission control for CS voice.

When the RNC decides to reject the CS voice RAB request because the admission control entity reports a failure

(excluding frozen BTS reason). This happens before the RRC: RADIO BEARER SETUP message would be sent to

the UE




When allocating resources for Wireless Priority Service CS Voice RAB fails and blind Inter-System handover to

GSM is not possible for example due to no neighbour cell available. In this case RNC responds to CN with RANAP:

RAB ASSIGNMENT RESPONSE("No Resource Available").

RAB SETUP FAILURES DUE TO LICENCE FOR CS VOICE

NetAct name: RAB_STP_FAIL_CS_VOICE_LIC

Description: The number of RAB setup failures caused by AMR capacity license exceeded for CS voice.

When the RNC rejects a CS Voice RAB request due to AMR capacity license exceeded.

RAB SETUP FAILURES DUE TO IUR TRANSPORT FOR CS VOICE

NetAct name: RAB_STP_FAIL_CS_VOICE_IUR_TR

Description: The number of failed CS voice RAB setups due to Iur transport resources. Also counter M1001C82 is

updated with this counter

When a CS voice traffic class RAB setup fails due to Iur transport resources.

RAB SETUP FAILURES DUE TO IU-CS TRANSPORT FOR CS VOICE

NetAct name: RAB_STP_FAIL_CS_VOICE_IU_CS

Description: The number of failed CS voice RAB setups due to Iu-CS transport resources. Also counter M1001C82

is updated with this counter

Updated: When a CS voice traffic class RAB setup fails due to Iu-CS transport resources.


S e l a s a , 0 8 N o v e m b e r 2 0 1 1


Portable Google_Earth

Download : Link Download


RAB setup failures for PS calls

RAB SETUP FAILURES DUE TO AC FOR PS DATA CONV

NetAct name: RAB_STP_FAIL_PS_CONV_AC

Description: The number of RAB setup failures caused by admission control for PS data conversational.

When the RNC decides to reject the PS data conversational RAB request because the admission control entity

reports a failure (excluding frozen BTS reason). This happens before the RRC: RADIO BEARER SETUP message

would be sent to the UE



RAB SETUP FAILURES DUE TO BTS FOR PS DATA CONV

NetAct name: RAB_STP_FAIL_PS_CONV_BTS

Description: The number of RAB setup failures caused by BTS for PS data conversational.


in the Iub or in the Iur interface

RAB SETUP FAILURES DUE TO TRANSPORT FOR PS DATA CONV

NetAct name: RAB_STP_FAIL_PS_CONV_TRANS

Description: The number of RAB setup failures caused by transport for PS data conversational.

When the RNC decides to reject the PS data conversational RAB request due to transport failure. This happens

before the RRC: RADIO BEARER SETUP message would be sent to the UE.

RAB SETUP FAILURES DUE TO RNC FOR PS DATA CONV

NetAct name: RAB_STP_FAIL_PS_CONV_RNC

Description: The number of RAB setup failures caused by RNC for PS data conversational.

When the RNC decides to reject the PS data conversational RAB request due to RNC internal failure. This

happens before the RRC: RADIO BEARER SETUP message would be sent to the UE.

RAB SETUP FAILURES DUE TO FROZEN BTS FOR PS DATA CONV

NetAct name: RAB_STP_FAIL_PS_CONV_FROZBS

Description: The number of RAB setup failures caused by frozen BTS for PS data conversational.

When the RNC decides to reject the PS data conversational RAB request because the admission control entity

blocks the radio link establishment to ensure the setup of high priority calls. This happens before the RRC:

RADIO BEARER SETUP message would be sent to the UE

RAB SETUP FAILURES DUE TO AC FOR PS DATA STREAM

NetAct name: RAB_STP_FAIL_PS_STREA_AC

Description: The number of RAB setup failures caused by admission control for PS data streaming.

When the RNC decides to reject the PS data streaming RAB request because the admission control entity reports

a failure (excluding frozen BTS reason). This happens before the RRC: RADIO BEARER SETUP message would be

sent to the UE

RAB SETUP FAILURES DUE TO BTS FOR PS DATA STREAM

NetAct name: RAB_STP_FAIL_PS_STREA_BTS

Description: The number of RAB setup failures caused by BTS for PS data streaming.


in the Iub or in the Iur interface.

RAB SETUP FAILURES DUE TO TRANSPORT FOR PS DATA STREAM

NetAct name: RAB_STP_FAIL_PS_STREA_TRANS

Description: The number of RAB setup failures caused by transport for PS data streaming.

When the RNC decides to reject the PS data streaming RAB request due to transport failure. This happens before

the RRC: RADIO BEARER SETUP message would be sent to the UE

RAB SETUP FAILURES DUE TO RNC FOR PS DATA STREAM

NetAct name: RAB_STP_FAIL_PS_STREA_RNC

Description: The number of RAB setup failures caused by RNC for PS data streaming.

When the RNC decides to reject the PS data streaming RAB request due to RNC internal failure. This happens

before the RRC: RADIO BEARER SETUP message would be sent to the UE



RAB SETUP FAILURES DUE TO FROZEN BTS FOR PS DATA STREAM

NetAct name: RAB_STP_FAIL_PS_STREA_FROZBS

Description: The number of RAB setup failures caused by frozen BTS for PS data streaming.

When the RNC decides to reject the PS data streaming RAB request because the admission control entity blocks

the radio link establishment to ensure the setup of high priority calls. This happens before the RRC: RADIO

BEARER SETUP message would be sent to the UE

RAB SETUP FAILURES DUE TO AC FOR PS DATA INTERA

NetAct name: RAB_STP_FAIL_PS_INTER_AC

Description: The number of RAB setup failures caused by admission control for PS data interactive.

When the RNC decides to reject the PS data interactive RAB request because the admission control entity reports

a failure (excluding frozen BTS reason). This happens before the RRC: RADIO BEARER SETUP message would be

sent to the UE.

RAB SETUP FAILURES DUE TO RNC FOR PS DATA INTERA

NetAct name: RAB_STP_FAIL_PS_INTER_RNC

Description: The number of RAB setup failures caused by RNC for PS data interactive.

When the RNC decides to reject the PS data interactive RAB request due to RNC internal failure. This happens

before the RRC: RADIO BEARER SETUP message would be sent to the UE

RAB SETUP FAILURES DUE TO ANCHORING FOR PS DATA INTERA

NetAct name: RAB_STP_FAIL_PS_INTER_ANCH

Description: The number of RAB setup failures caused by ongoing relocation or hard handover for PS data

interactive.

When the RNC rejects the PS data interactive RAB assignment request due to ongoing relocation or hard

handover.

RAB SETUP FAILURES DUE TO FROZEN BTS FOR PS DATA INTERA

NetAct name: RAB_STP_FAIL_PS_INTER_FROZBS

Description: The number of RAB setup failures caused by frozen BTS for PS data interactive.

When the RNC decides to reject the PS data interactive RAB request because the admission control entity blocks

the radio link establishment to ensure the setup of emergency calls. This happens before the RRC: RADIO

BEARER SETUP message would be sent to the UE.

RAB SETUP FAILURES DUE TO AC FOR PS DATA BACKG

NetAct name: RAB_STP_FAIL_PS_BACKG_AC

Description: The number of RAB setup failures caused by admission control for PS data background.

When the RNC decides to reject the PS data background RAB request because the admission control entity

reports a failure (excluding frozen BTS reason). This happens before the RRC: RADIO BEARER SETUP message

would be sent to the UE

RAB SETUP FAILURES DUE TO RNC FOR PS DATA BACKG

NetAct name: RAB_STP_FAIL_PS_BACKG_RNC

Description: The number of RAB setup failures caused by RNC for PS data background.

When the RNC decides to reject the PS data background RAB request due to RNC internal failure. This happens

before the RRC: RADIO BEARER SETUP message would be sent to the UE.

RAB SETUP FAILURES DUE TO ANCHORING FOR PS DATA BACKG

NetAct name: RAB_STP_FAIL_PS_BACKG_ANCH

Description: The number of RAB setup failures caused by ongoing relocation or hard handover for PS data

background.




When the RNC rejects the PS data background RAB assignment request due to ongoing relocation or hard

handover

RAB SETUP FAILURES DUE TO FROZEN BTS FOR PS DATA BACKG

NetAct name: RAB_STP_FAIL_PS_BACKG_FROZBS

Description: The number of RAB setup failures caused by frozen BTS for PS data background.

When the RNC decides to reject the PS data background RAB request because the admission control entity blocks

the radio link establishment to ensure the setup of emergency calls. This happens before the RRC: RADIO

BEARER SETUP message would be sent to the UE

RAB SETUP NOT STARTED DUE TO NOT SUPPORTED PARAMETERS FOR PS

NetAct name: RAB_STP_FAIL_PS_NOT_SUPP_PAR

Description: The number of occasions when the PS RAB setup attempt is not started due to requested

parameters are not supported by the RNC. The RAB setup attempt counter is not updated in this case.

The counter is updated when RANAP: RAB ASSIGNMENT RESPONSE with error information is sent to the CN as a

result of that the requested parameters are not supported.

RAB SETUP NOT STARTED DUE TO UE CAPABILITY FOR PS

NetAct name: RAB_STP_FAIL_PS_UE_CAPA

Description: The number of occasions when the PS RAB setup attempt is not started due to requested

parameters are not supported by the UE. The RAB setup attempt counter is not updated in this case.

The counter is updated when RANAP: RAB ASSIGNMENT RESPONSE with error information is sent to the CN as a

result of that the requested parameters are not supported.

RAB SETUP FAILURES DUE TO IUB AAL2 TRANS FOR PS DATA STREAM

NetAct name: RAB_STP_FAIL_PS_ST_IUB_AAL2

Description: The number of RAB setup failures caused by Iub AAL2 transport resource shortage for PS data

streaming.

When the RNC decides to reject the PS data streaming RAB request due to Iub transport resource shortage

between RNC and WBTS. This happens before the RRC: RADIO BEARER SETUP message is sent to the UE

RAB SETUP FAILURES DUE TO IUR TRANSPORT FOR PS STREAMING

NetAct name: RAB_STP_FAIL_PS_STRE_IUR_TR

Description: The number of failed PS Streaming traffic class RAB setups due to Iur transport resources. Also

counter M1001C102 is updated with this counter.

When a PS streaming traffic class RAB setup fails due to Iur transport resources.


S e n i n , 0 7 N o v e m b e r 2 0 1 1

RRC active failures

RRC ACTIVE FAIL DUE TO IU INT

NetAct name: RRC_CONN_ACT_FAIL_IU

Description: The number of RRC active failures caused by Iu-interface related problem.

When an Iu interface failure occurs, and the failure causes the release of the RRC connection. After this, the

RNC sends an RANAP: IU RELEASE REQUEST to all involved CNs



RRC ACTIVE FAIL DUE TO RADIO INTERFACE

NetAct name: RRC_CONN_ACT_FAIL_RADIO

Description: The number of RRC active failures due to radio interface.

When a radio interface failure occurs, and the failure causes the release of the RRC connection. After this, the

RNC sends an RANAP: IU RELEASE REQUEST to all involved CNs.

RRC ACTIVE FAIL DUE TO BTS REASONS

NetAct name: RRC_CONN_ACT_FAIL_BTS

Description: The number of RRC active failures due to BTS.

When a BTS failure occurs, and the failure causes the release of the RRC connection. After this, the RNC sends

an RANAP: IU RELEASE REQUEST to all involved CNs

RRC ACTIVE FAIL DUE TO THE IUR INT

NetAct name: RRC_CONN_ACT_FAIL_IUR

Description: The number of RRC active failures due to drift RNC.

When a procedure failure in drift RNC occurs, and the failure causes the release of the RRC connection. After

this, the RNC sends an RANAP: IU RELEASE REQUEST to all involved CNs

RRC ACTIVE FAIL DUE TO CIPH FAIL

NetAct name: RRC_CONN_ACT_FAIL_CIPH

Description: The number of RRC connection releases after a failed Security Mode Control procedure.

When the RNC releases the RRC connection after receiving RANAP: IU RELEASE COMMAND with cause "Requested

Ciphering and/or Integrity Protection Algorithms not Supported" from the core network.

RRC ACTIVE FAIL DUE TO RNC INTER REASONS

NetAct name: RRC_CONN_ACT_FAIL_RNC

Description: The number of RRC active failures due to reasons not covered by the other failure counters.

When an RNC internal failure occurs, and the failure causes the release of the RRC connection. After this, the

RNC sends an RANAP: IU RELEASE REQUEST to all involved CNs. The possible failure reasons updating this

counter are for example RNC internal failure, transmission failure or loss of Frame Protocol synchronization.

RRC ACTIVE FAIL DUE TO UE

NetAct name: RRC_CONN_ACT_FAIL_UE

Description: Number of RRC active failures due to UE.

When the RRC connection is released due to the UE not responding to an RRC message or responding with such

failure message that the connection must be released. After this, the RNC sends a RANAP: IU RELEASE REQUEST

to all involved CNs

SRB ACTIVE FAILURE CONVERSATIONAL

NetAct name: SRB_ACT_FAIL_CONV

Description: The number of abnormally released RRC connections with standalone signalling radio bearer before

RAB assignment. Both originating and terminating conversational calls are included.

When a standalone SRB is released due to some failure, i.e. when it is counted as RRC Active Failure in the old

Service Level counters. The counter is updated when the establishment cause in RRC: RRC CONNECTION

REQUEST is either Originating Conversational Call or Terminating Conversational Call.

SRB ACTIVE FAILURE STREAMING

NetAct name: SRB_ACT_FAIL_STREA


RAB assignment. Both originating and terminating streaming calls are included.






REQUEST is either Originating Streaming Call or Terminating Streaming Call.

SRB ACTIVE FAILURE INTERACTIVE

NetAct name: SRB_ACT_FAIL_INTERA


RAB assignment. Both originating and terminating interactive calls are included.



REQUEST is either Originating Interactive Call or Terminating Interactive Call.

SRB ACTIVE FAILURE BACKGROUND

NetAct name: SRB_ACT_FAIL_BACKG


RAB assignment. Both originating and terminating background calls are included.



REQUEST is either Originating Background Call or Terminating Background Call.

SRB ACTIVE FAILURE OTHER

NetAct name: SRB_ACT_FAIL_OTHER


RAB assignment.



REQUEST is some other cause not covered by counters M1001C635-M1001C638.


M i n g g u , 0 6 N o v e m b e r 2 0 1 1

RRC access failures

RRC ACC FAIL DUE TO RADIO INT SYNCH

NetAct name: RRC_CONN_ACC_FAIL_RADIO

Description: The number of RRC access failures caused by radio interface synchronisation failure

When the RNC does not receive the RRC: RRC CONNECTION SETUP COMPLETE message from the UE within 6

seconds, and the RNC has not received the NBAP message which indicates that L1 synchronisation has been

established between UE and BTS. This counter is updated also in case of inter-system handovers and inter-RNC

hard handovers

RRC ACC FAIL DUE TO UU INT

NetAct name: RRC_CONN_ACC_FAIL_MS

Description: The number of RRC access failures caused by UE.

When the RNC does not receive the RRC: RRC CONNECTION SETUP COMPLETE message from the UE within 6

seconds, and the RNC has received the NBAP message which indicates that L1 synchronisation has been

established between UE and BTS. This counter is updated also in case of incoming SRNS relocations, inter-system

handovers, and inter-RNC hard handovers

RRC ACC FAIL DUE TO RNC INTER REASONS

NetAct name: RRC_CONN_ACC_FAIL_RNC




Description: The number of RRC access failures caused by RNC internal reason.

When an RNC internal failure occurs before receiving the RRC: RRC CONNECTION SETUP COMPLETE message

from the UE. This counter is updated also in case of incoming SRNS relocations, inter-system handovers, and

inter-RNC hard handovers


J u m a t , 0 4 N o v e m b e r 2 0 1 1

RRC setup failures

RRC SETUP FAIL DUE TO HC

NetAct name: RRC_CONN_STP_FAIL_HC

Description: The number of RRC setup failures caused by Handover Control.

When the RNC decides to reject the RRC connection request because the handover control entity reports a

failure. After this, the RNC sends an RRC: RRC CONNECTION REJECT message to the UE.

This counter is updated also in case of incoming SRNS relocations, inter-system handovers, and inter-RNC hard

handovers

RRC SETUP FAIL DUE TO AC

NetAct name: RRC_CONN_STP_FAIL_AC

Description: The number of RRC setup failures caused by Admission Control.

When the RNC decides to reject the RRC connection request because the admission control entity reports a

failure (excluding frozen BTS reason).

After this, the RNC sends an RRC: RRC CONNECTION REJECT message to the UE. This counter is updated also in

case of incoming SRNS relocations, inter-system handovers, and inter-RNC hard handovers

RRC SETUP FAIL DUE TO BTS REASONS

NetAct name: RRC_CONN_STP_FAIL_BTS

Description: The number of RRC setup failures caused by BTS.

When the RNC decides to reject the RRC connection request due to unsuccessful radio link setup. After this, the

RNC sends an RRC: RRC CONNECTION REJECT message to the UE.


handovers

RRC SETUP FAIL DUE TO TRANS

NetAct name: RRC_CONN_STP_FAIL_TRANS

Description: The number of RRC setup failures caused by Transport.

When the RNC decides to reject the RRC connection request due to transport failure. After this, the RNC sends

an RRC: RRC CONNECTION REJECT message to the UE.


handovers

RRC SETUP FAIL DUE TO RNC INTER REASONS

NetAct name: RRC_CONN_STP_FAIL_RNC

Description: The number of RRC setup failures caused by RNC internal reason.

When the RNC decides to reject the RRC connection request due to RNC internal failure. After this, the RNC

sends an RRC: RRC CONNECTION REJECT message to the UE


handovers




RRC SETUP FAIL DUE TO FROZEN BTS

NetAct name: RRC_CONN_STP_FAIL_FROZBS

Description: The number of RRC setup failures caused by frozen BTS.

When the RNC decides to reject the RRC connection request, because the admission control entity blocks the

radio link establishment, to ensure the setup of high priority calls. After this, the RNC sends an RRC: RRC

CONNECTION REJECT message to the UE.


handovers

RRC CONN SETUP FAIL DUE TO RNTI ALLO FAIL

NetAct name: RRC_CONN_STP_FAIL_RNTI_ALLO

Description: Number of RRC setup failures caused by RNTI allocation failure

When the RNC decides to reject the RRC connection request due to RNTI allocation failure caused by RRMU

overload. After this, the RNC sends an RRC: RRC CONNECTION REJECT message to the UE

RRC SETUP FAIL DUE TO IUB AAL2 TRANS

NetAct name: RRC_CONN_STP_FAIL_IUB_AAL2

Description: The number of RRC setup failures caused by Iub AAL2 transport resource shortage.

When the RNC decides to reject the RRC connection request due to Iub transport resource shortage between RNC

and WBTS. After this the RNC sends an RRC: RRC CONNECTION REJECT message to the UE

This counter is updated also in case of inter-system handovers, and inter-RNC hard handover

RRC SETUP REJECT DUE TO EMERGENCY CALL REDIRECTION

NetAct name: RRC_CONN_STP_REJ_EMERG_CALL

Description: The number of RRC connections rejected due to emergency call redirection.

When the RNC redirects an emergency call to the GSM network by sending an RRC CONNECTION REJECT with

redirection information to the UE

RRC CONN SETUP FAIL DUE TO ICSU OVERLOAD

NetAct name: RRC_CONN_STP_FAIL_ICSU_OVERL

Description: The number of RRC setup failures caused by ICSU overload.

When the RNC decides to reject the RRC connection request due to ICSU overload. After this, the RNC sends an

RRC: RRC CONNECTION REJECT message to the UE.


Save As PDF

Overview

This download allows you to export and save to the PDF format in eight 2007 Microsoft Office programs. It also

allows you to send files as e-mail attachments in the PDF format in a subset of these programs. Specific features

vary by program.

This Microsoft Save as PDF Add-in for 2007 Microsoft Office programs supplements and is subject to the license

terms for the 2007 Microsoft Office system software. You may not use this supplement if you do not have a

license for the software.

Supported Operating Systems: Windows Server 2003, Windows Vista, Windows XP Service Pack 2

This download works with the following Office programs:

Download : Link Download

System requirements




Microsoft Office Access 2007

Microsoft Office Excel 2007

Microsoft Office InfoPath 2007

Microsoft Office OneNote 2007

Microsoft Office PowerPoint 2007

Microsoft Office Publisher 2007

Microsoft Office Visio 2007

Microsoft Office Word 2007

To install this download:

1. Download the file by clicking the Download button (above) and saving the file to your hard disk.

2. Double-click the SaveAsPDF.exe program file on your hard disk to start the Setup program.

3. Follow the instructions on the screen to complete the installation.

Instructions for use:

After you install this download open the document you want to publish and then, depending on the program you

are using, select Save to PDF from the Office or File menu.

For more information, search Office Help for "Save a file in PDF format".

To remove this download:

To remove the download file, delete the file SaveAsPDF.exe.

1. On the Start menu, point to Settings and then click Control Panel.

2. Double-click Add/Remove Programs.

3. In the list of currently installed programs, select Microsoft Save as PDF Add-in for 2007 Microsoft Office

programs and then click Remove or Add/Remove. If a dialog box appears, follow the instructions to

remove the program.

4. Click Yes or OK to confirm that you want to remove the program.

Instructions


S e n i n , 3 1 O k t o b e r 2 0 1 1

NEMO - - SYSTEM INFORMATION BLOCK

SYSTEM INFORMATION BLOCK 1

T302/N302 : CELL UPDATE/URA UPDATE (MS

timer)

T309 : The timer for supervising successful

connection establishment incase of an inter-RAT

cell re-selection (MS timer)

SIB1 T300/N300 : The timer for supervising

successful connection establishment incase of an

inter-RAT cell re-selection (MS timer).

T312 : The timer for supervising successful

establishment of a physicalchannel (MS timer

used in idle mode).

N312 : This parameter defines the maximum

number of "in sync"indications received from L1

during the establishment of a physical channel

(UE counter used in idle mode).




CellID = RNCID (12bit)+CID(16bit)

CellIreselection is based on CPICH EcNo

Sintrasearch : 10dB (5*2)

Sintersearch : 8dB (4*2)

Treselection : 1 sec

Max UE Txpwr: 21 dBm


CPICH: 33 dBm

PRACH

Power ramp step: 2 dB

Peambleretransmax: 8 times


Ul Interference




Posting Lebih Baru Posting LamaBeranda

Langganan: Entri (Atom)


Neighbor Cell:

Qqualmin=-18dB

Qrxlevmin=-115dBm [(2*-58)+1]

Intra Freq Neighbor measurement is based on CPICH

Ec/No


Map

pagerank check

Template Simple. Diberdayakan oleh Blogger.

technology blog 2

Documents

g gsm2g

g cell reselection list

e n i n

g gsm measurements

g gsmwhen ue

n o v e

serving cell

rrc connection rejectmessage