TEKLINX PAKISTAN

Your Embedded Solution Partner

Industrial Instrument:Coupling Decoupling Network.

Equipment for EFT/Surge measurements, together with EFT/Surge generator.

Specifications: Frequency Range:

1MHz~100MHz Coupling Capacitance:

33nF Damping between the

output and the input: >20dB

Rated Load: 20A Line voltages: 380V Phase voltage:220V

Industrial Instrument: Dry Heat Test Oven

This chamber is used for test of heat stress on materials like Poly carbonate, ABS, Nylon etc.

It can also be used to simulate the aging effect of electronic accessories.

Specifications: Temperature Range: room temperature ~ 80’C Adjust able linear slope for

temperature rise Uniform heat flow across the

chamber Availability of Main voltage

terminals Computer interface Capacity: 4.5 cubic Ft

Industrial Instrument:Dust Chamber

Dust tests for equiment. Complies with

IEC60529 Specification:

Complies with IEC60529

Capacity: 10 Cubic Ft.

Industrial Instrument:Glow wire Tester

Used for testing the material properties on extreme temperature ranges

Specification: Temperature Range:

Max 1000 ‘C Adjustable contact

time Adjustable tension with

glow element

Industrial Instrument:Impulse Generator

Used for simulating the lightening surges.

Specification: Max voltage: 10KV Standard 1.2 / 50us

wave-form (+/-30%) Adjustable time between

the surges Adjustable surge count. Oscilloscope output for

impulse wave form viewing.

Industrial Instrument:Magnetic Tester For external Origin

Magnetic ring coil is used to test the EUT under magnetic field disturbances.

Specification: Max Flux: 0.5m Tesla Standard 1000 AT coil

Industrial Instrument:Power Frequency Tester

This equipment is used for testing the insulation properties of EUT

Specification: Max output potential:

10KV (Adjustable) Short circuit protection Program able stress

time LCD Based

interface / counter / voltage indicator

Industrial Instrument:Rain Fall Simulator

Rain fall tester is used for simulating the raining scenario for EUT.

Its use is to check and verify the sealing of EUT

Industrial Instrument:Short Time over Current Tester

It is used for checking the EUT under severe short circuit and over load conditions.

Specification: Output current range:

1200A / 3000A Time of pulse: 10ms Purely inductive

solution