telephone line interface for the gt series file• installation / operation instructions • gt-tli...

GT-TLI

Installation / Operation Instructions

This is the installation and operation manual for the GT-TLI only. Refer to the GT Series Installation and Operation Manual for complete information on all other GT components.

1012

Telephone Line Interface for the GT Series

ATTENTION:

Precautions

! WARNING(Negligence could result in death or serious injury to people.)

2 | GT-TLI Installation / Operation Instructions

• High voltage is present internally. Do not open the case. Electric shock may occur.• Do not dismantle or alter the unit. Fire or electric shock may occur.• Donotconnectanynon-specifiedpowersourcetothe+,-terminalsanddonotinstalltwopowersuppliesin

paralleltoasingleinput.Fire,damagetotheunit,orsystemmalfunctionmayoccur.• Keeptheunitawayfromwateroranyotherliquid.Fireorelectricshockmayoccur.• Do not put any metal or paper into the unit through the openings. Fire of electric shock may occur.• Donotplugorunplugwithwethands.Electricshockmayoccur.• KeepACplugawayfrommoistureordustasfiremayoccur.• KeepACcordfrombeingmarredorcrushed.IftheACcordisdamaged,fireorelectricshockcouldoccur.• Donotuseapowersupplywithavoltageotherthanspecified.Fireorelectricshockmayoccur.• InsertACplugcompletelyandsecurelyintoACoutlet.Otherwise,fireorelectricshockmayoccur.• Donotinstalloruseneargasesorflammablematerials.Fireorexplosionmayoccur.

! CAUTION(Negligence could result in injury to people or damage to property.)

• Beforeturningonpower,makesurewiresarenotcrossedorshorted.Fireorelectricshockmayoccur.• Whenmountingtheunitonwall,installtheunitinaconvenientlocation,butnotwhereitcouldbejarred

orbumped.Injurymayoccur.• Donotinstallormakeanywireterminationswhilepowersupplyispluggedin.Itcouldresultinelectricshock

or damage to the unit.• Donotinstalltheunitinanyofthefollowinglocations.Fire,electricshock,orunittroublemayoccur.

-Placesunderdirectsunlight,ornearheatingequipmentthatvariesintemperature. -Placessubjecttodust,oil,chemicals,hydrogensulfide(hotspring). -Placessubjecttomoistureandhumidityextremes,suchasbathrooms,cellars,greenhouses,etc. -Placeswheretemperatureisquitelow,suchasinsidearefrigeratedareaorinfrontofanairconditioner. -Placessubjecttosteamorsmoke(nearheatingorcookingsurfaces). -Placeswherenoisegeneratingdevicessuchasdimmerswitchesorinvertorelectricalappliances,areclose.

• Onproductswithgroundterminals,connecttoanearthground.Fireormalfunctionmayoccurifunitisnotproperly grounded.

• ForDCpowersystems,useAiphonepowersupplymodelspecifiedwiththesystem.Ifnon-specifiedproductisused,fireormalfunctionmayoccur.

• Do not place anything on top of unit. Fire or unit malfunction may occur.• Donotmounttheunitinaplacesubjectedtoconstantvibrationorimpact.Ifjarredorknockedoffthewall,

injurymayoccur.

GENERAL PRECAUTIONS

• Allunits,exceptforthedoorstation,aredesignedforindooruseonly.Donotuseoutdoors.• Inareaswherebroadcastingstationantennasarecloseby,theintercomsystemmaybeaffected

byradiofrequencyinterference.• Ifacellularphoneisusedcloseby,theunitmaymalfunction.• Thisproduct,beingacontrolunitfordoorrelease,shouldnotbeusedasacrimepreventiondevice.• Keeptheunitmorethan3feetawayfromradioorTVset.• Duetotheenvironmentalsoundaroundtheunit,itmayhindersmoothcommunication.Thisisnotamalfunction.

• Installation / Operation Instructions• GT-TLI• RJ11 cable

Wiring

Installation

AworkingGTsystemwithatleastoneentrypanelisrequiredwhenusingtheGT-TLItelephonelineinterfaceadaptor.TheGT-TLIcanbedeskmountedorwallmountedusingthemountingslotsonthebackoftheunit.Ensurethatthemounting location is accessible.

3

Package Contents

R2

R1

NO C NC R1 R2CO TEL 12-24V

+

-

12-24VAC/DC

GT Bus LineTo Local Telephone

From Phone Line

GT-TLI

EL-12S

13/16"

3-9/

16"

1-1/

8"

Secondary Dry Contact

PT

SpecificationsCOLINE: Totelephoneline(RJ11)TEL: ToInternalhousetelephone(RJ11)12-24VAC/DC:Topowersupply12VAC/DC-0.5A,24VAC/DC-0.3AR1/R2: To R1/R2 audio bus of GT system NO/C/NC: 12VDC-2A,24VDC-1A


Below are a few examples of connecting the GT-TLI to an existing telephone installation.

Wiring (continued)

Basic Connection

CO TEL

From Phone Line

CO TEL

CO TEL

PBX

Analog Port

CO Line

SETTING

1

4GHI

7PQRS

#0

ABC

JKL

TUV

5

8

2

6

9WXYZ

MNO

3DEF

TRANSFERPRIVACY HOLDSETTING

1

4GHI

7PQRS

#0

ABC

JKL

TUV

5

8

2

6

9WXYZ

MNO

3DEF

TRANSFERPRIVACY HOLDSETTING

1

4GHI

7PQRS

#0

ABC

JKL

TUV

5

8

2

6

9WXYZ

MNO

3DEF

TRANSFERPRIVACY HOLD

Note:GT-TLI supports a maximum of 3 telephone sets.

PBX Connection

3 Telephone Connection

From Phone Line

Linking GT-TLI to GT system

Direct Select / Push Button Entrance Station Addressing

Step 1: Remove front cover from entrance station.Step 2: Toenterprogrammingmode,useasmallscrewdrivertopushandreleasebuttonundertherubbercaponfront

ofspeakermodule(GT-DA-L).TheamberLEDwillbeginflashing,thenremainlit.Oncelit,theentrypanelisinprogramming mode.

Step 3: AtGT-TLI,pressthePROGbutton.TheGT-TLIisnowconnectedtotheentrancepanel.Step 4: Push and release the desired Call Button on the entrance station to assign the button to the GT-TLI station that is

active.Abliptonewillbeplayed.

Step 5: AtGT-TLI,pressthePROG button to complete programming.Step 6: Toexitprogramming,pushthebuttonundertherubbercapontheGT-DA-LmoduleagainandtheamberLEDwill

turnoff.Thesystemisnowreadyforuse.

GT Digital Display Entrance Station Addressing

Step 1: Remove front cover from entrance station.Step 2: Toenterprogramming,useasmallscrewdrivertopushandreleasebuttonundertherubbercaponfrontof

speakermodule(GT-DA-L).TheamberLEDwillbeginflashing,thenremainlit.Oncelit,theentrancestationisinprogrammingmode.TheLCDwillshow“CONNECTING”whileinprogrammingmode.

Step 3: AtGT-TLI,pressthePROGbutton.TheGT-TLIisnowconnectedtotheentrancepanel.Step 4: Scroll to the station number to be programmed or manually dial the number. When the tenant station number is

displayed,pushandreleasetheBell button to assign the address to the GT-TLI station that is active. A blip tone willbeplayed.

Step 5: AtGT-TLI,pressthePROG button to complete programming.Step 6: Toexitprogramming,pushthebuttonundertherubbercapontheGT-DA-LmoduleagainandtheamberLEDwill

turnoff.Thesystemisnowreadyforuse.

DO NOT press and hold the Call Button as doing so will clear the memory for this button.

5

NAMES

DO NOT press and hold the Call Button as doing so will clear the memory for this button.

PowerLEDIndicatorUnitisonwhenlit.

POWER: Master power switch(ON/OFF)

PROG: Press to link GT-TLI to system (in program mode)

3 Position SwitchOFF: Disables GT-TLI’s dial out functionON: Enables GT-TLI’s dial out functionLOCAL PROG: Programming by using direct connected telephone


SET UP

Linking GT-TLI to GT system (continued)

TheGT-TLIcanbeprogrammedeitherwiththelocal(internal)telephoneorremotelybycallingin,viaDTMF.(seeflowchartbelow)

EnterPassword

2000# or 2001#

Enter programming

• telephone #• time outs• audio levels• etc...

Enter00toexitprogramming

GT-DM Entrance Station Addressing

Step 1: Whileinstandbymode,enter#plusIDcode(defaultis 1111).Re-enterIDcode.Step 2: Usetheup/downarrowsandscrollto PROGRAMMING . Push the Bell button to enter programming mode. TheamberLEDwillbeginflashing,thenremainlit.Oncelit,theentrypanelisinprogrammingmode.TheLCDwillshow“CONNECTING”whileinprogrammingmode.

Step 3: AtGT-TLI,pressthePROGbutton.TheGT-TLIisnowconnectedtotheentrancepanel.Step 4: Scroll to the station number to be programmed or manually dial the number. When the tenant station number is

displayed,pushandreleasetheBell button to assign the address to the GT-TLI station that is active. A blip tone willbeplayed.

Step 5: AtGT-TLI,pressthePROG button to complete programming.Step 6: Toexitprogramming,pressthe“X”buttononthepaneltoreturntothemainmenu(theamberLEDwillturnoff).

Scroll to QUIT andpressthe“X”buttonagain.Thesystemisnowreadyforuse.

DO NOT press and hold the Call Button as doing so will clear the memory for this entry.

Select“LOCALPROG”on GT-TLI

Pick up local telephone and dial code

Local TelephoneDial phone #

of GT-TLI

Remote Telephone

SET UP - Accessing Program Mode

7

Note:

• A maximum of 10 seconds are allowed for each programming input. If the time exceeds 10 seconds, the GT-TLI returns to standby mode.

• No programming entries are possible when the GT-TLI is playing indicator sounds.

• Entering a correct function code is indicated by 1 long beep.

• Correct entry of parameters are indicated by the message “The code entered is correct” (see Programming Summary Chart).

• Incorrect entry of parameters are indicated by 2 long beeps, or by the automated message “The code entered is incorrect”. The GT-TLI will wait for a new function number.

Remote programming via DTMF telephone

• DialthetelephonenumberoftheGT-TLI(tenant’sphonenumber).• Anautomatedmessagewillplay“Callfromdoorpanel.”• Dialoneofthetwofollowingprogramaccesscodes; 2000# or 2001#. 2000#=generalparameters(volumelevels,timing,etc.) 2001#=controlledparameters(callingtelephone#,etc.)• Anautomatedmessagewillplay“Thecodeenterediscorrect.”• Makeprogrammingchanges(seenextpage).• Whenprogrammingiscomplete,dial00toexit.• “Thecodeenterediscorrect”willbeplayedandtheGT-TLIwillgointoidlemode.

Local programming via telephone connected directly to GT-TLI

• Flipthe3positionswitchontheGT-TLItoLOCAL PROG.• Activate handset on connected telephone.• Dialoneofthetwofollowingprogramaccesscodes; 2000# or 2001#. 2000#=generalparameters(volumelevels,timing,etc.) 2001#=controlledparameters(callingtelephone#,etc.)• Anautomatedmessagewillplay“Thecodeenterediscorrect.”• Makeprogrammingchanges(seenextpage).• Whenprogrammingiscomplete,dial00toexit.• “Thecodeenterediscorrect”willbeplayedandtheGT-TLIwillgointoidlemode.• Hanguphandsetandreturnthe3positionswitchtoONposition.

SET UP - Basic ProgrammingThefollowing6programmingstepsmustbedonepriortooperatingtheGT-TLI.

Disabling / Enabling Door Calling TelephoneTheGT-TLIcanbedisabledfromcallingtheprogrammedtelephone,incaseswherethetenantwishesnottobedisturbedbytheGTentrancepanel.ThedefaultsettingiswithDoorCallActivationenabled.

• Enter program access code 2001# -“Thecodeenterediscorrect”willbeplayed• Enter toenable,or# to disable• “Thecodeenterediscorrect”willbeplayed,andtheGT-TLIwillgointoidlemode

Ring Duration of Locally Connected TelephoneSettheringdurationfortheconnectedtelephone(s).Timesetmustbebetween10-45seconds.

• Enter program access code 2001# -“Thecodeenterediscorrect”willbeplayed• Enter 20-1longbeepwillbeplayed• Enter nn-“Thecodeenterediscorrect”willbeplayed(nn=timeinseconds,i.e.30)

Program Remote Call NumberSettheremotetelephonenumberthatwillbedialedbytheGT-TLI.Thetelephonenumbercanbeupto16digitslong.Ifthetelephonenumberislessthan16digits,press#afterthelastdigit.A" “canbeusedwhenapauseisrequired.Forexample,ifneedingtodialadigitpriortoaccessinganoutsidephoneline,orifdialingaphonenumberwithanextension,usethe“ “forapause.• Enter program access code 2001# -“Thecodeenterediscorrect”willbeplayed• Enter 21-1longbeepwillbeplayed• Enter nn #-“Thecodeenterediscorrect”willbeplayed(nn=telephonenumber)

To delete a telephone number.

• Enter program access code 2001# -“Thecodeenterediscorrect”willbeplayed• Enter 21-1longbeepwillbeplayed• Enter #-“Thecodeenterediscorrect”willbeplayed

Program DTMF Code for GT Entrance PanelInorderforthetelephonetoactivatethedoorreleasecontactontheGTentrancepanel,a2-digitaccesscodemustbeenteredonthetelephonewhileincommunicationwiththedoorstation.Thedefaultcodeis10.

• Enter program access code 2000# -“Thecodeenterediscorrect”willbeplayed• Enter 25-1longbeepwillbeplayed• Enter nn-“Thecodeenterediscorrect”willbeplayed(nn=2digitaccesscode)

Program DTMF Code for GT-TLI Secondary Dry ContactInorderforthetelephonetoactivatethesecondarydrycontactontheGT-TLI,a2-digitaccesscodemustbeenteredonthetelephonewhileincommunicationwiththedoorstation.Thedefaultcodeis20.

• Enter program access code 2000# -“Thecodeenterediscorrect”willbeplayed• Enter 30-1longbeepwillbeplayed• Enter nn-“Thecodeenterediscorrect”willbeplayed(nn=2digitaccesscode)

Program Duration of GT-TLI Secondary Dry ContactThesecondarydrycontactontheGT-TLIcanbeactivatedforadurationof1-10seconds.Thedefaultis5seconds.

• Enter program access code 2000# -“Thecodeenterediscorrect”willbeplayed• Enter 32-1longbeepwillbeplayed• Enter nn-“Thecodeenterediscorrect”willbeplayed(nn=timeinseconds,2digits)

When programming is complete dial 00 toexitprogrammingmode.


SET UP - Advanced ProgrammingEnding Communication After Releasing Door on GT Entrance PanelChoosetoendcommunicationimmediatelyafterdoorrelease(default),after5seconds,ornotatall.

• Enter program access code 2000#-“Thecodeenterediscorrect”willbeplayed• Enter 35-1longbeepwillbeplayed• Enter 1(immediatedisconnect),1longbeepwillbeplayed,enter0-“Thecodeenterediscorrect”willbeplayed• Enter 1(5sec.delay),1longbeepwillbeplayed,enter1-“Thecodeenterediscorrect”willbeplayed• Enter 0(nodisconnect)-“Thecodeenterediscorrect”willbeplayed

Ending Communication After Activating Secondary Contact on GT-TLIChoosetoendcommunicationimmediatelyafterdoorrelease(default),after5seconds,ornotatall.

• Enter program access code 2000#-“Thecodeenterediscorrect”willbeplayed• Enter 37-1longbeepwillbeplayed• Enter 1(immediatedisconnect),1longbeepwillbeplayed,enter0-“Thecodeenterediscorrect”willbeplayed• Enter 1(5sec.delay),1longbeepwillbeplayed,enter1-“Thecodeenterediscorrect”willbeplayed• Enter 0(nodisconnect)-“Thecodeenterediscorrect”willbeplayed

DoorCallNotificationWhenLocallyConnectedTelephoneisinUseChoosetoreceiveaverbalmessage(default)oratoneindicatingacallfromthedoorwhenthetelephoneisinuse.

• Enter program access code 2000#-“Thecodeenterediscorrect”willbeplayed• Enter 43-1longbeepwillbeplayed• Enter 1(verbalmessage),or0(beep)-“Thecodeenterediscorrect”willbeplayed

Ring Style Selection For GT Entrance Panel CallsChoosebetween1.5secondsofringingfollowedby3.5secondsofsilencerepeated(default)or1secondofringfollowedby1second of silence repeated.

• Enter program access code 2000# -“Thecodeenterediscorrect”willbeplayed• Enter 58-1longbeepwillbeplayed• Enter 0(1.5sec.on-3.5sec.off)or1(1sec.on-1sec.off)-“Thecodeenterediscorrect”willbeplayed

Ring Duration Prior to GT-TLI Answering Outside CallEnterthedurationinseconds(defaultis45sec.)thattheGT-TLIwillringbeforeansweringatelephonecall.Thisisprimarilyafactorwhenprogrammingfromanoutsideline.Timemustbesetinseconds,from10-255seconds.

• Enter program access code 2000#-“Thecodeenterediscorrect”willbeplayed• Enter 59-1longbeepwillbeplayed• Enter nnn(timeinseconds,3digit)-“Thecodeenterediscorrect”willbeplayed

Change Program PasswordsChangepasswordsforbothgeneralparameters(defaultis2000)andcontrolledparameters(defaultis2001).Thepasswordsmustbe4digitsandmustbedifferentfromeachother.

• Enter program access code 2000# or 2001# -“Thecodeenterediscorrect”willbeplayed• Enter 90(2000),orEnter91(2001)-1longbeepwillbeplayed• Enter nnnn(nnnn=new4digitpassword)-“Thecodeenterediscorrect”willbeplayed

Language Selection for Voice MessagesChoosethelanguageforthevoicemessages(defaultisEnglish).

• Enter program access code 2000#-“Thecodeenterediscorrect”willbeplayed• Enter 78-1longbeepwillbeplayed• Enter n(n=language,0=French,1=English,2=Spanish)-“Thecodeenterediscorrect”willbeplayed

9


SET UP - Advanced Programming (continued)

Communication Level For Local TelephoneAdjustthereceiveandtransmitcommunicationvolumefortheGTentrancepaneltothelocallyconnectedtelephone.

Receive from GT Entrance Panel. The default setting = 04.

• Enter program access code 2000# -“Thecodeenterediscorrect”willbeplayed• Enter 06-1longbeepwillbeplayed• Enter nn(nn=level,00maxlevel-31minlevel)-“Thecodeenterediscorrect”willbeplayed

Transmit to GT Entrance Panel. The default setting = 10.

• Enter program access code 2000#-“Thecodeenterediscorrect”willbeplayed• Enter 07-1longbeepwillbeplayed• Enter nn(nn=level,00maxlevel-31minlevel)-“Thecodeenterediscorrect”willbeplayed

Communication Level for Remote Dialed TelephoneAdjustthereceiveandtransmitcommunicationvolumefortheGTentrancepaneltotheremotedialedtelephone.

Receive from GT Entrance Panel. The default setting = 04.

• Enter program access code 2000#-“Thecodeenterediscorrect”willbeplayed• Enter 08-1longbeepwillbeplayed• Enter nn(nn=level,00maxlevel-31minlevel)-“Thecodeenterediscorrect”willbeplayed

Transmit to GT Entrance Panel. The default setting = 10.

• Enter program access code 2000# -“Thecodeenterediscorrect”willbeplayed• Enter 09-1longbeepwillbeplayed• Enter nn(nn=level,00maxlevel-31minlevel)-“Thecodeenterediscorrect”willbeplayed

Time Setting for Delay Call TransferSetthedelaytimewhendelaycalltransferisenabled.Calltransfercanbedelayedfrom1-40seconds.The default setting = 10.

• Enter program access code 2000# -“Thecodeenterediscorrect”willbeplayed• Enter 64-1longbeepwillbeplayed• Enter nn(nn=timeinsec.,01-40)-“Thecodeenterediscorrect”willbeplayed

Switching to Communication Mode with Remote TelephoneChoosebetween3waysofswitchingtocommunicationwiththeremotetelephone.

0=switchifendofringingtoneisdetected1=switchifDTMFdetected2=switchimmediately(default)

• Enter program access code 2000#-“Thecodeenterediscorrect”willbeplayed• Enter 95-1longbeepwillbeplayed• Enter n(n=mode,0-1-2)-“Thecodeenterediscorrect”willbeplayed

11


Default Values

TonesON signal ringingOFF signal ringingON signal busyOFF signal busyON signal EOCOFF signal EOC

Value +/- Limits1s +/- 200ms3s +/- 200ms200ms +/- 50ms400ms +/- 50ms500ms-200ms+50ms500ms-200ms+50ms

Min & Max800/12002800/3200150/250350/450300/550300/550

Values to Prog080/120280/320015/025035/045030/055030/055

Default Values135/165315/385045/055045/055045/055045/055

Disconnect After Silence or Continuous SignalSetthetimethattheGT-TLIwillwaitbeforedisconnectingwheneithersilenceoracontinuoussignalisplayed.Thetimecanbesetinincrementsof5seconds,upto45seconds.Enteravalue0through9.0=functionoff,1=5sec,2=10sec,3=15sec,4=20sec,5=25sec,6=30sec,7=35sec,8=40sec,9=45secThe defualt setting = 2.

• Enter program access code 2000# -“Thecodeenterediscorrect”willbeplayed• Enter 97-1longbeepwillbeplayed• Enter n(n=1-9)-“Thecodeenterediscorrect”willbeplayed

Automatic Pause Prior to DialingThe GT-TLI can be set to pause from 1-6 seconds prior to dialing.The defualt setting = 3 seconds.

• Enter program access code 2000# -“Thecodeenterediscorrect”willbeplayed• Enter 98-1longbeepwillbeplayed• Enter n(n=timeinseconds)-“Thecodeenterediscorrect”willbeplayed

Manually Programming TonesRing,Busy,andEndOfCommunication(EOC)tonesmayneedtobeadjustedmanuallywhenconnectingtheGT-TLItoaPBX.RefertoPBXmanualforspecificsettingrequirements.Valueslistedaretypically3or4digits,inmilliseconds(i.e.0.8secondswillbe800).

• Enter program access code 2000# -“Thecodeenterediscorrect”willbeplayed• Enter 99-1longbeepwillbeplayed• Enterthetonetypevalueoftheringingtone(1=simple,2=double)-1longbeepwillbeplayed• EntertheminimumvalueoftheONsignaloftheringingtone(3-4digits)-1longbeepwillbeplayed• EnterthemaximumvalueoftheONsignaloftheringingtone(3-4digits)-1longbeepwillbeplayed• EntertheminimumvalueoftheOFFsignaloftheringingtone(3-4digits)-1longbeepwillbeplayed• EnterthemaximumvalueoftheOFFsignaloftheringingtone(3-4digits)-1longbeepwillbeplayed• Enterthetonetypevalueofthebusytone(1=simple,2=double)-1longbeepwillbeplayed• EntertheminimumvalueoftheONsignalofthebusytone(3-4digits)-1longbeepwillbeplayed• EnterthemaximumvalueoftheONsignalofthebusytone(3-4digits)-1longbeepwillbeplayed• EntertheminimumvalueoftheOFFsignalofthebusytone(3-4digits)-1longbeepwillbeplayed• EnterthemaximumvalueoftheOFFsignalofthebusytone(3-4digits)-1longbeepwillbeplayed• EnterthetonetypevalueoftheEOCtone(1=simple,2=double)-1longbeepwillbeplayed• EntertheminimumvalueoftheONsignaloftheEOCtone(3-4digits)-1longbeepwillbeplayed• EnterthemaximumvalueoftheONsignaloftheEOCtone(3-4digits)-1longbeepwillbeplayed• EntertheminimumvalueoftheOFFsignaloftheEOCtone(3-4digits)-1longbeepwillbeplayed• EnterthemaximumvalueoftheOFFsignaloftheEOCtone(3-4digits)-1longbeepwillbeplayed

IMPORTANT:IfthereisnoEOCtone,oriftheEOCiscontinuous(noOFFsignal),enter000forthe4valuesofthistone.



Audible Level of Voice MessagesAdjustthevolumelevelofaudiblemessagesplayedattheGTentrancepanel.

• Enter program access code 2000#-“Thecodeenterediscorrect”willbeplayed• Enter 18 -1longbeepwillbeplayed• Enter n(n=level,0maxlevel-7minlevel)-“Thecodeenterediscorrect”willbeplayed

VoiceMessages

Message#1: “Pleasewait,yourcallisinprogress.”Message#2: “Pleaseenter.”Message#3: “Sorry,thelinebusy.Pleasetryagainlater.”Message#4: “Sorry,noanswer.Pleasetryagainlater.”Message#5: “Thecodeenteredisincorrect.”Message#6: “Thecodeenterediscorrect.”Message#7: “Callfromdoorpanel.”Message#8: “Telephonecall.”Message#9: “Routingon.”Message#10: “Routingoff.”Message#11: “Yourcallisinprogress.”

Enable / Disable Message #2IftheguidancelanguagefeatureisturnedonattheGTentrancepanel,itisrecommendedthatMessage#2beturned off to avoid confusion.

• Enter program access code 2000#-“Thecodeenterediscorrect”willbeplayed• Enter 41-1longbeepwillbeplayed• Enter nn(nn=02,message2)-1longbeepwillbeplayed• Enter 1(enablemessage),or0(disablemessage)-“Thecodeenterediscorrect”willbeplayed

Restore Default ParametersTo restore the GT-TLI to default parameters.

• Enter program access code 2000#-“Thecodeenterediscorrect”willbeplayed• Enter 29-“Thecodeenterediscorrect”willbeplayed

13

SET UP - Quick Reference Programming Chart

Password Code Function Parameters DefaultValue

2000# 18 Audiolevelforvoicemessage Max0,Min7 4 25 DTMFcodeforGTpanelrelay 2digits 10 29 Restoredefaultparameters Factorydefault - 30 DTMFcodeforGT-TLIdrycontact 2digits 20 32 DurationofGT-TLIdrycontact 01-10(1-10seconds) 05 35 Endcommunicationwhenactivating 0=communicationcontinues 1-0 dry contact on GT panel 1-0 = communication ends after contact is activated 1-1=communicationends5sec. after contact is activated 37 Endcommunicationwhenactivating 0=communicationcontinues 1-0 dry contact on GT-TLI 1-0 = communication ends after contact is activated 1-1=communicationends5sec. after contact is activated 41 Enable / Disable message 2 0 = message off 1 1 = message on 43 Callnotificationwhentelephone 0=tone 1 is in use 1 = verbal message 58 RingstylewhenGTpanelcalls 0=1.5secon,3.5secoff 0 1=1secon,1secoff 59 RingdurationpriortoGT-TLIanswering 001-255(1-255seconds) 045 outside call 64 Timesettingfordelaycalltransfer 01-40(1-40seconds) 10 78 Languageselectionforvoicemessages 0=French,1=English,2=Spanish 1 90 Createnewpassword 4digits 2000 95 SwitchtoCommunicationmodewith 0=tonedetection 0 remotetelephone 1=DTMFdetection 97 Disconnectaftersilenceorcont.tone 1digit,0-9(5secintervals) 2(10sec) 98 Automaticpausepriortodialing 1-6seconds 3 99 Programmingtonesmanually -

2001# Enabling door calling telephone Enable # Disable door calling telephone Disable # 20 Ringdurationoflocallyconnected 10-45seconds - telephone 21 Programremotecall# Max.16numbers - 91 Createnewpassword 4digits 2001 00 Codetoexitprogrammingmode - 00


Locally Connected Telephone (i.e. cordless or corded telephone in apartment)Receiving a call from the door:• Telephone rings• “Callfromdoorpanel”messageisplayed• Communication can begin after message is played• Toreleasedoor(buzz-in),enter2digitcode(defaultis10)• Systemwilldisconnectafter1minute

Receivingacallfromdoorwhilecurrentlyonphone:• “Callfromdoorpanel”messageisplayed Option1:Donothing,doorstationwilltimeout Option2:Hangupcurrentcall,phonewillring,andcommunicationwithvisitoratdoorcanbegin Option 3: Press #keytoendcurrentcallandbegincommunicationwithvisitoratdoor• Toreleasedoor(buzz-in),enter2digitcode(defaultis10)• Systemwilldisconnectafter1minute

Receivingatelephonecallwhilecommunicatingwithvisitoratdoor:• “TelephoneCall”messageisplayed• Press #keytoswitchtotelephonecall,whichwillterminatecommunicationtotheGTpanel

Remote Telephone Instructions: (i.e. answering door with a cell phone)Receiving a call from the door:• Telephone rings• Answercall• Communicationwithdoorisimmediate• Toreleasedoorenter2digitcode(defaultis10)• Systemwilldisconnectafter1minute

Forwarding Door Calls to a Remote Telephone (i.e. cell phone)Locally connected telephone:• Press # 1tobeginforwardingdoorcallstoaremotetelephone-“Thecodeenterediscorrect”willbeplayed• Press # 0tostopforwardingdoorcallstoaremotetelephone-“Thecodeenterediscorrect”willbeplayedForwarding Door Calls to a Locally Connected Telephone (tenant) Remote telephone:• DialGT-TLItelephonenumber(tenant’sphonenumber)• GT-TLIanswerswith“Thecodeenterediscorrect”afterringdurationisreached• Press # 1tobeginforwardingdoorcallstoaremotetelephone-“Thecodeenterediscorrect”willbeplayed• Press # 0tostopforwardingdoorcallstoaremotetelephone-“Thecodeenterediscorrect”willbeplayedDisable / Silence Door Call-insFrom a locally connected telephone:• Press # #todeactivateGTpanelcallin-“Thecodeenterediscorrect”willbeplayedFrom a remote telephone:• DialGT-TLItelephonenumber(tenant’sphonenumber)• GT-TLIanswerswith“Thecodeenterediscorrect”afterringdurationisreached• Press # #todeactivateGTpanelcallin-“Thecodeenterediscorrect”willbeplayedEnable / Activate Door Call-insFrom a locally connected telephone:• Press # toactivateGTpanelcallin-“Thecodeenterediscorrect”willbeplayedFrom a remote telephone• DialGT-TLItelephonenumber(tenant’sphonenumber)• GT-TLIanswerswith“Thecodeenterediscorrect”afterringdurationisreached• Press # toactivateGTpanelcallin-“Thecodeenterediscorrect”willbeplayed

OPERATION

1515

OPERATION - Mode Selection

Mode OFF

Whenthe3positionswitch(LOCALPROG/ON/OFF)isinOFFposition,GTpanelcallwillnotringthelocallyconnectedtelephone or the remote telephone.

Mode ON Without Transfer

Whenthe3positionswitch(LOCALPROG/ON/OFF)isinONpositionandthetransferfeatureisnotturnedon,theGTpanelcallwillringthelocallyconnectedtelephone.

Mode ON With Transfer

Whenthe3positionswitch(LOCALPROG/ON/OFF)isinONpositionandthetransferfeatureturnedon,theGTpanelcallwillringtheremotetelephone.

Local

Remote

Local

Remote

Local

Remote

PARAMETERS OF INSTALLATION

Programming DefaultValue Installation

Ringdurationoftheinternaltelephoneset 45seconds ___________________________

Remotecalltelephonenumber 460 ___________________________

DTMFcodeforoperating 10 ___________________________GTPanel’sdrycontact

DTMFcodeforoperatingGT-TLI’s 20 ___________________________secondary dry contact

OperatingtimeofGT-TLI’s 5seconds ___________________________secondary dry contact

Endingcommunicationafterreleasing Yes ___________________________door on GT entrance panel

Endingcommunicationafteractivating Yes ___________________________secondary contact on GT-TLI

Generalparameterspassword 2000 ___________________________

Controlledparameterspassword 2001 ___________________________

PhonenumberofGT-TLI - ___________________________

S/NofGT-TLI - ___________________________


17

BASIC PROGRAMMING STEP FROM REMOTE TELEPHONE

DialthephoneoftheGT-TLI:_____________,callfromdoorpanelwillbeplayed

Entering Remote Call Number

Enter 2001#-“Thecodeenterediscorrect”willbeplayedEnter 21,1longbeepwillbeplayedEntertelephonenumber____________,“Thecodeenterediscorrect”willbeplayedEnter 00toexit-3shortbeepswillbeplayed

Adjust Ring Duration of Local Telephone

Enter 2001#-“Thecodeenterediscorrect”willbeplayedEnter 20,1longbeepwillbeplayedEnterdurationinseconds(10-45s)____________,“Thecodeenterediscorrect”willbeplayedEnter 00toexit-3shortbeepswillbeplayed

Enter Door Release Code for GT Entrance Panel

Enter 2000#-“Thecodeenterediscorrect”willbeplayedEnter 25,1longbeepwillbeplayedEnter2digitcode____________,“Thecodeenterediscorrect”willbeplayedEnter 00toexit-3shortbeepswillbeplayed

Enter Door Release Code for Secondary Contact on GT-TLI

Enter 2000#-“Thecodeenterediscorrect”willbeplayedEnter 30,1longbeepwillbeplayedEnter2digitcode____________,“Thecodeenterediscorrect”willbeplayedEnter 00toexit-3shortbeepswillbeplayed

Adjust Contact Duration of Secondary Contact on GT-TLI

Enter 2000#-“Thecodeenterediscorrect”willbeplayedEnter 32,1longbeepwillbeplayedEntertimeinseconds(1-10s,2digits)____________,“Thecodeenterediscorrect”willbeplayedEnter 00toexit-3shortbeepswillbeplayed


SPECIFICATIONS

Dimensions 9-7/16”x7-1/16”x2-1/16”,240mmx180mmx53mm

Weight 6.35oz,0.18kg

Temperature 32°F-140°F,0°C-40°C

Connections StandardsinglelinePBXjackmastersocketwithin50metersor PABXextensionoftheinternaltelecommunicationnetworkofacompany.

Powerrequired 12V-24VAC/DC-0.5A

Consumption 12VAC/DC 24VAC/DC Standby:95mA Standby:45mA

Standards EN60950 EN55022Edition98ClassB EN55024Edition98ClassB FCCparts68&15 IC CS-03

Programming Localorremotelyviatouch-tone(DTMF)telephone

SystemCapacity 1callnumber(16digits)

Memory Non-volatilememory

Chassis ABS plastic

Symptom Recommendations

TheredLEDontheGT-TLIdoesn’tlight. Checkpolarityonpowersupply. Verifyvoltageisadequate.(12V-24VAC/DC-0.5A).

GT-TLI does not ring the programmed Check connection of telephone line on the CO terminal.telephone number. Re-program the call number.

Inopportuneswitchingwhileincommunication GT-TLIisinstalledonaninternallineofaPABX.Tonesaredifferent,whenexternalnumberiscalled. refertoAdvancedProgrammingsectiononprogrammingtonesmanually. GT-TLIisconnectedtoaPBXtelephoneline.Tonesaredifferent, refer to Advanced Programming section on programming tones manually.

TROUBLESHOOTING TIPS

WARRANTY

Aiphonewarrantsitsproductstobefreefromdefectsofmaterialandworkmanshipundernormaluseandserviceforaperiodoftwoyearsafterdeliverytotheultimateuser.Aiphonewillrepairfreeofchargeorreplaceatnochargeshouldtheproductbecomedefectiveuponwhichexaminationshalldisclosetobedefectiveandunderwarranty.Aiphonereservesuntoitselfthesolerighttomakethefinaldecisionwhetherthereisadefectinmaterialsand/orworkmanship;andwhetherornottheproductiswithinthewarranty.ThiswarrantyshallnotapplytoanyAiphoneproductwhichhasbeensubjecttomisuse,neglect,accident,ortouseinviolationofinstructionsfurnished,norextendedtounitswhichhavebeenrepairedoralteredoutsideofthefactory.Thiswarrantydoesnotcoverbatteriesordamagecausedbybatteriesusedinconnectionwiththeunit.ThiswarrantycoversbenchrepairsonlyandanyrepairsmustbemadeattheshoporplacedesignatedinwritingbyAiphone.Aiphonewillnotberesponsibleforanycostsincurredinvolvingon-siteservicecalls.

ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuanttoPart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonableprotectionagainstharmfulinterferenceinaresidentialinstallation.Thisequipmentgenerates,uses,andcanradiateradiofrequencyenergy,andifnotinstalledandusedinaccordancewiththeinstructions,maycauseharmfulinterferencetoradiocommunications.However,thereisnoguaranteethatinterferencewillnotoccurinaparticularinstallation.Ifthisequipmentdoescauseharmfulinterferencetoradioortelevisionreception,whichcanbedeterminedbyturningtheequipmentoffandon,theuserisencouragedtotrytocorrecttheinterferencebyoneofmoreofthefollowingmeasures:

• Reorient or relocate the receiving antenna• Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiverisconnected.• Increasetheseparationbetweentheequipmentandreceiver.• Consultthedealeroranexperiencedradio/TVtechnicianforhelp.

ThisequipmentcomplieswithPart68oftheFCCrulesandtherequirementsadoptedbytheACTA.OnthebackofthisequipmentisalabelthatcontainstheproductidentifierUS:23BOT05B578 along withtheREN(RingerEquivalencyNumber)of0.5B. Ifrequested,thesenumbersmustbeprovidedtothe telephone company.

AplugandjackusedtoconnectthisequipmenttothepremiseswiringandtelephonenetworkmustcomplywiththeapplicableFCCPart68rulesandrequirementsadoptedbytheACTA.Acomplianttelephonecordandmodularplugisprovidedwiththisproduct.Seeinstallationinstructionsfordetails.

Ifthisequipment(GT-TLI)causesharmtothetelephonenetwork,youwillbenotifiedbythetelephonecompanyinadvance.Adiscontinuationofservicemayberequired.Ifnecessary,youwillbeadvisedofyourrightstofileacomplaintwiththeFCC.

Thetelephonecompanymaymakechangesinitsfacilities,equipment,operations,orproceduresthatcouldaffecttheoperationofthisequipment.Ifthishappensthetelephonecompanywillprovideadvancenoticeinorderforyoutomakenecessarymodificationstomaintainuninterruptedservice.

IftroubleisexperiencedwiththeGT-TLI,pleasecontactAiphoneCorporationat800-692-0200forrepairinformation.Iftheequipmentiscausingharmtothetelephonenetwork,thetelephonecompanymayrequestthatyoudisconnecttheequipmentuntiltheproblemisresolved.

19

FCC REQUIREMENTS

Aiphone Corporation1700130thAve.NEBellevue,WA98005Ph:(800)692-0200Fax:(425)[email protected]

telephone line interface for the gt series file• installation / operation instructions • gt-tli...

Documents