TempTrackr™ Wireless Multipoint System Kit - 6

267 Lowell Rd, Hudson NH 03051, USA | Phone: 1.888.328.7661 | Fax: 1.888.329.8328 | www.sengenuity.com

TempTrackr™ - Key FeaturesBatteryless Wireless Temperature Sensors•Multiple Sensor Tracking Capability•118 inch (~300 cm) Interrogation Distance• 1

Temperature Range: -20°C to 120°C•User friendly, simple to use interface•Plug-n-play sensor connectivity and installation•

TempTrackr™ - ContentsSix Wireless SAW Temperature Sensors•One Wireless Reader•One Dipole Antenna with extended cable for Reader•Software CD•Documentation•Eight Hours of Application Engineering Support•

DescriptionThe TempTrackr™ Multipoint System provides a batteryless, non-invasive and low cost temperature measurement solution that is ideally suited for applications ranging from High Power Switchgear to Wireless Food Temperature Probes. The Kit is designed to showcase the capabilities of the TempTrackr™ Wireless Multipoint System. Each Kit includes six batteryless wireless temperature sensors that are capable of reading temperatures between -20°C and 120°C.

The TempTrackr™ Wireless Multipoint System is capable of tracking up to six sensors using a single interrogation antenna and up to eighteen senors using multiple interrogation antennae. SenGenuity will work closely with you to adapt the TempTrackr™ Wireless Multipoint System to meet the specific needs of your application.

Parameter ValueOperating Temperature Range (Sensor)2 -20°C to 120°C

Maximum Temperature Limits (Sensor)3 -40°C to 160°C

Operating Temperature Range (Reader) -20°C to 70°C

Power Consumption of Reader 400mA, 5V

Frequency Span4 428 MHz to 439 MHz

Maximum Interrogation Distance1 118 inches (~ 300 cm)

Dimensions of Reader 3.3” x 2.1” x 1.0” (8.38 cm x 5.33 cm x 2.54 cm)

Dimensions of Sensor 2.00” x 1.06” x 1.26” x 0.52” (Slot Width) (5.08 cm x 2.69 cm x 3.20 cm x 1.32 cm)

Performance Specifications

267 Lowell Rd, Hudson NH 03051, USA | Phone: 1.888.328.7661 | Fax: 1.888.329.8328 | www.sengenuity.com

Part NumberTempTrackr™ Wireless Multipoint System Kit -6 (Bolt Mount) 723200055

Wireless Reader Wireless Temperature Sensors

TempTrackr™ Wireless Multipoint System Kit - 6 (Universal Mount) 723200050

TempTrackr™ Wireless Multipoint System Kit - 6 (Bolt and Universal Mount) 723200053

Bolt Mount Temperature Sensor Universal Mount Temperature Sensor

DISCLAIMERVectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. REV. G

Product status and specifications are subject to change.

Notes:1) Dependent on RF environment.

2) Sensor may suffer material degradation and thermal drift if operated outside specified operating temperature range.

3) Sensor calibration drift and operating lifetime are only warranted within the specified operating temperature range, however, sensors will operate beyond this range with degraded performance.

4) FCC/CE Certification: The Wireless reader, a component of the TempTrackrTM System, has been certified to the U.S. FCC and EU RF device compliance standards. When a reader affixed with labels/markings indicating such compliance (e.g. FCC ID marking and/or CE marking) is sold, it will be configured appropriately and certified to meet these standards. A CE marked reader will be configured only to operate in the unlicensed ISM band (433 MHz) at the power levels as permitted in the EN standard. Customers are advised that any modification or operation of the reader that is CE- marked outside of the permitted frequency band and power level limits, will render the product non-compliant to those standards. Customers are solely responsible for certification of their end-product to the applicable country standards should the FCC/CE-marked reader sold by SenGenuity be integrated into the end-product sold by customers and the reader is modified or operated outside of the original FCC/CE certification limits. SenGenuity assumes no liability for operation of any FCC/CE-marked reader in any manner inconsistent with the requirement of the applicable standards.

5) The approximate dimensions of the TempTrackr™ Multipoint Starter Kit case are 11.0” x 9.6” x 3.2” ( 28.0 cm x 24.5 cm x 8.20 cm).

6) The approximate weight of the fully loaded TempTrackr™ Multipoint Starter Kit is 2.0 lb (0.9 kg).