Michael Pacholok, Director

Purchasing and Materials Management Division City Hall, 18th Floor, West Tower 100 Queen Street West Toronto, Ontario M5H 2N2

Joanne Kehoe Manager Construction Services

October 28, 2015. Reply to: Michael Porcarelli Via Website Posting: 10 Pages Tel: (416) 338-5585

ADDENDUM NO. 3

TENDER NO. 294-2015

RE: RENOVATION OF FIRE STATION NO. 424 LOCATED AT 462 RUNNYMEDE ROAD, TORONTO.

CLOSING DATE: 12:00 P.M. NOON (LOCAL TIME), NOVEMBER 3, 2015 Please refer to the above Tender Call document in your possession and be advised of the following information: 1. General Clarification To Questions From Bidders

Q1. Lockers - lockers located in rooms 10, 213, 220, 221 add to a quantity of 31. Specifications show 40 lockers required, please clarify where the balance of lockers are required.

A1. The total number of lockers required is 31.

Q2. Washroom accessories - Hook strips not indicated on plans, please confirm if required.

A2. Yes they are required. The total number of hook strips is 12.

Room Name Number of

hook strips Recreational Room Janitor Corridor 114 Mens Bedroom Womens Bedroom Captains Room Office

1 2 2 2 1 1 3

Q3. Products for the Metal Storage shelving.

Is it 1 bay or 3 bays of rack at 18” D x 36” W x 72” H? How many shelves per bay does these shelving units have? It says a quantity 3 on the required materials list and doesn’t indicate what the 3 is for.

A3. Provide 3 bays of racks. Each bay to measure 18” D x 36” W x 72” H. Each bay to have 6 shelves

in total (1 as a top, 1 as a bottom, and 4 in the middle).

Continued on next page… 1 of 10

Q4. Can you advise if shelving can be approved as an alternate to the specified shelving? 18” x 36” shelf with angle reinforcement is rated for 525lbs per shelf instead of the 600lbs

rating in specification. Also please note, label holders and the colour black is not available. Painted our standard grey.

A4. We reviewed the proposed shelving unit and we approve this product as an alternate. Product

brochure of 6 pages is enclosed in this addendum for other Bidders’ reference. Model number: Kwikerect Series 6000 by North American Steel.

Q5. Is there an existing BAS? If yes, who is the Base Building Control contractor?

A5. There is no Building Automation Contractor. 2. Additional Technical Information

Please refer to the following additional Architectural information: ARCHITECTURAL: 2.1 Additional three robe hooks (Bobrick B682) to be provided. One in BF Washroom on Ground

Floor, and two in Women’s Washroom on Second Floor.

2.2 Provide new wood door D112 from Vestibule Corridor into Kitchen. Provide HM door frame and new hardware as per attached revised drawings: A2.2 and A3.5, revision 1, dated Oct 27, 2015.

2.3 Two ramps in the Kitchen on the Ground Floor are deleted from the Contract. Contractor to

remove existing terrazzo floor, level the subfloor, and install new 24”x24” porcelain tile on Schluter waterproofing membrane Ditra XL. New floor finish to flush with the adjacent floor. Porcelain tile to match the tile proposed for Ground Floor Lounge.

2.4 Janitor Room on Ground Floor need not be fire separated from the Vestibule nor BF Washroom. Provide regular ½” gypsum board in lieu of Type ‘x’ gypsum board. Provide non- rated wood door in lieu of HM fire resistance rated door.

All other information regarding the call document is unchanged. All other terms and conditions remain the same. Should you have any questions regarding this addendum contact Michael Porcarelli, Corporate Buyer, at email mporcar@toronto.ca. Please attach this addendum to your Request for Tender document and be governed accordingly. Bidders must acknowledge receipt of all addenda on the space provided on the Tender Call Cover Page as per the Process Terms and Conditions, Section 1, Item 8 - Addenda, of the Tender Call document. All other aspects of the Tender remain the same. Yours truly, Joanne Kehoe, Manager, Construction Services, Purchasing & Materials Management

2 of 10

3 of 10

4 of 10

www.northamericansteel.ca

KWIKERECT SHELVING

TYPES OF UNITS

OPEN SHELF UNIT

Kwikerect open shelf units provide economical storage space; but have the strength and durability for industrial use.

The Back and Side braces provide added stability and can be alternated, if installed in rows of several units.

Shelving components are finished with rust inhibitor undercoating and a durable grey polymer powder coat finish.

MODULAR DRAWER SHELF UNIT

Modular drawers in shelving are usually installed between knee and chest height for contents to be more conveniently reached and for better visibility than in stationary cabinets.

Extra bulk storage space is available – above and below – when placing drawers into shelving unit, requiring only the same floor space as a cabinet.

Full extension drawers provide for more compact and better identified storage plus easier retrieval of small tools / parts.

Drawers can be installed and moved to any level and can be incorporated into your existing 24” deep shelving, using NAS adapter rails.

Features & Benefits: All extension drawers, installed on roller glides, allow full access to back of the drawer. Adjustable partitions and dividers for precise storage and inventory control are available.

DIVIDER UNIT

Bolted in shelf dividers offer the flexibility to easily separate, organize and identify the locations of small parts and products. Full height dividers are used to segment shelf levels and storage of individual items. Angle bend top, bottom and back, with folded and flattened front edge. Used primarily with closed type shelving.

Bin divider units can be used individually or in continuous configurations.

CLOSED SHELVING UNIT WITH BIN BOXES Back and sides of closed type shelving provide additional stability while giving greater protection to the contents.

This unit is most popular for bin box storage, for small parts storage and picking.

It can be used along or in conjunction with other units providing a finished look at the end of rows.

OTHER PRODUCTS FROM NORTH AMERICAN STEEL

ROLLFORMED RACKING

EASYUP 5000 SHELVING

EASYUP 7000 SHELVING

WIDESPAN 4000 SHELVING

KWIKERECT SERIES 6000 BOLTED & BOLTLESS SHELVING

NORTH AMERICAN STEEL

NORTH AMERICAN STORAGE

300 Hopkins Street, Whitby, Ontario Canada L1N 2B9Phone: (905) 668-3300Toll Free: (800) 735-4153 Email: sales@naseco.caFax: (905) 668-5477 Web: www.naseco.ca

2103 - 7th Street, Nisku, Alberta Canada T9E 7Y3Phone: (780) 955-2444Toll Free: (800) 241-8968 Email: sales@naseco.comFax: (780) 955-3463 Web:

With 60 Years

Manufacturing Experience

NORTH AMERICAN STEEL

is the leading name for

Innovative Storage Ideas

NORTH AMERICAN STEEL

300 Hopkins Street, Whitby, Ontario Canada L1N 2B9Phone: (905) 668-3300TollTT Free: (800) 735-4153 Email: sales@naseco.caWith 60 YeaYY rs

www.naseco.com

NORTH AMERICAN STEELNORTH AMERICAN STEEL

5 of 10

KWIKERECT SHELVING

STORAGE SYSTEMS

ECONOMICAL QUALITY STEEL SHELVING SYSTEMS FOR OFFICE, INDUSTRIAL OR COMMERCIAL USE.

BOLTED OR BOLTLESS (EASILY ADJUSTABLE COMPRESSION CLIP TYPE) SHELVING.

INDIVIDUAL ACCESSORIES AVAILABLE TO MEET YOUR SPECIFIC STORAGE NEEDS.

ATTRACTIVE, DURABLE POWDER COAT FINISH.

ECONOMICAL WITH INDUSTRIAL STRENGTH AND DURABILITY CAPABLE OF SUPPORTING 2-TIER MEZZANINE OR CATWALK

VERSATILITY OF MODULAR COMPONENTS AND ACCESSORIES

OUR STRENGTH IS OUR PRODUCT www.northamericansteel.ca

KWIKERECT SHELVING

COMPONENTS

BACK & SIDE PANEL

OFFSET POST

FLANGED SHELF

BEADED POST

BOXED SHELF

ANGLE REINFORCEMENT

BASEPLATE

BASEPLATE (Beaded Post only)

GUSSET

SHELF CLIP

STANDARD FOOTPLATE (Galvanized)

SHELF DIVIDER

BEADED FOOTPLATE (Galvanized)

NUTS & BOLTS

SIDE X-BRACE

Use a pair of cross braces on each alternative back and side for open type shelving. Sizes are nominal, specify by shelf depth and width. For units higher than 99”, one pair of braces are required for each side and back (priced per pair).

Available in sizes 6’3” up to 12’3”., in 12 inch increments. Cannot be used as a common post.

Common beaded post in the front offers full width accessibility to shelves for ease of removal.

Fornt and back edges have return bends for easy slide in installation and provide maximum storage.

Reinforcements increase shelf capacity. They bolt into front and back lip of shelf panel.

Full height dividers are used to segment shelf levels for storage of individual items. Angle bent top, bottom and back, with rolled edge front. Used primarily with closed type shelving.

Use combination of these heights & allow for 2” overlap.

Example: 2 of 39” - Fit 75” Posts 1 of 39” - Fit 87” Posts 2 of 51” - Fit 99” Posts

Create a finished look and simplify floor cleaning. Channel construction provides strength and neat appearance.

Four clips are required Per shelf on intermediate levels. Top and bottom shelves must be bolted.

3” gussets can be used in place of braces. Each unit requires 8 gussets.

To simplify floor cleaning and provide a clean look. Channel construction provides strength & neat appearance. For use with optional beaded post only.

Foot plates are required on carpet or tiled floor areas, or when lagging to the floor is required.

Footplates can be used for posts, either side by side or back to back as one common footplate.

5 of ¼” pan head nuts and bolts are provided per shelf at no additional charge.

Front & back edges have channels and corners are welded for heavy duty applications.

E-mail: sales@naseco.ca Toll Free: 1-800-735-4153

KWIKERECT SHELVING

ASSEMBLY COMPONENTS

FEATURES OF BOLTED AND BOLTLESS SHELVING

Basic Kwikerect unit consists of four offset angle posts, steel shelves, side & back braces and compression clips.

Bolted and Boltless shelving systems offer strength and durability and are ideal for warehouses and stockrooms.

Easily assembled and adjusted for changing requirements without dismantling the unit.

In the Boltless Kwikerect system the shelf is easily snapped between compression clips and posts.

Shelves are adjustable on 1” centres. Flanged shelves are channel formed for strength. Additional

shelf reinforcements can be added to increase shelf capacity or for impact resistance.

P - POST SH - SHELF AR - ANGLE REINFORCEMENT FP - FOOTPLATE BP - BASE PLATE SD - SHELF DIVIDERS PP - SIDE / BACK PANELS XB – X-BRACE (Back & Sides)

P

SH

AR XB

FP BP

SD

PP

OPEN UNIT

CLOSED UNIT

For heavy duty applications, welded box shelves are available.

Solid side and back panels are available to create closed shelving units.

Shelf dividers allow for multiple storage areas per shelf. Baseplates provide neat appearance and prevent dust

from collecting underneath units. Versatility allows for designing to customer requirements,

from light shelving storage to 2-tier high mezzanines. Shelving units are finished with rust inhibitor undercoating

and durable grey polymer powder coat finish for longevity.

6 of 10

KWIKERECT SHELVING

STORAGE SYSTEMS

ECONOMICAL QUALITY STEEL SHELVING SYSTEMS FOR OFFICE, INDUSTRIAL OR COMMERCIAL USE.

BOLTED OR BOLTLESS (EASILY ADJUSTABLE COMPRESSION CLIP TYPE) SHELVING.

INDIVIDUAL ACCESSORIES AVAILABLE TO MEET YOUR SPECIFIC STORAGE NEEDS.

ATTRACTIVE, DURABLE POWDER COAT FINISH.

ECONOMICAL WITH INDUSTRIAL STRENGTH AND DURABILITY CAPABLE OF SUPPORTING 2-TIER MEZZANINE OR CATWALK

VERSATILITY OF MODULAR COMPONENTS AND ACCESSORIES

OUR STRENGTH IS OUR PRODUCT www.northamericansteel.ca

KWIKERECT SHELVING

COMPONENTS

BACK & SIDE PANEL

OFFSET POST

FLANGED SHELF

BEADED POST

BOXED SHELF

ANGLE REINFORCEMENT

BASEPLATE

BASEPLATE (Beaded Post only)

GUSSET

SHELF CLIP

STANDARD FOOTPLATE (Galvanized)

SHELF DIVIDER

BEADED FOOTPLATE (Galvanized)

NUTS & BOLTS

SIDE X-BRACE

Use a pair of cross braces on each alternative back and side for open type shelving. Sizes are nominal, specify by shelf depth and width. For units higher than 99”, one pair of braces are required for each side and back (priced per pair).

Available in sizes 6’3” up to 12’3”., in 12 inch increments. Cannot be used as a common post.

Common beaded post in the front offers full width accessibility to shelves for ease of removal.

Fornt and back edges have return bends for easy slide in installation and provide maximum storage.

Reinforcements increase shelf capacity. They bolt into front and back lip of shelf panel.

Full height dividers are used to segment shelf levels for storage of individual items. Angle bent top, bottom and back, with rolled edge front. Used primarily with closed type shelving.

Use combination of these heights & allow for 2” overlap.

Example: 2 of 39” - Fit 75” Posts 1 of 39” - Fit 87” Posts 2 of 51” - Fit 99” Posts

Create a finished look and simplify floor cleaning. Channel construction provides strength and neat appearance.

Four clips are required Per shelf on intermediate levels. Top and bottom shelves must be bolted.

3” gussets can be used in place of braces. Each unit requires 8 gussets.

To simplify floor cleaning and provide a clean look. Channel construction provides strength & neat appearance. For use with optional beaded post only.

Foot plates are required on carpet or tiled floor areas, or when lagging to the floor is required.

Footplates can be used for posts, either side by side or back to back as one common footplate.

5 of ¼” pan head nuts and bolts are provided per shelf at no additional charge.

Front & back edges have channels and corners are welded for heavy duty applications.

E-mail: sales@naseco.ca Toll Free: 1-800-735-4153

KWIKERECT SHELVING

ASSEMBLY COMPONENTS

FEATURES OF BOLTED AND BOLTLESS SHELVING

Basic Kwikerect unit consists of four offset angle posts, steel shelves, side & back braces and compression clips.

Bolted and Boltless shelving systems offer strength and durability and are ideal for warehouses and stockrooms.

Easily assembled and adjusted for changing requirements without dismantling the unit.

In the Boltless Kwikerect system the shelf is easily snapped between compression clips and posts.

Shelves are adjustable on 1” centres. Flanged shelves are channel formed for strength. Additional

shelf reinforcements can be added to increase shelf capacity or for impact resistance.

P - POST SH - SHELF AR - ANGLE REINFORCEMENT FP - FOOTPLATE BP - BASE PLATE SD - SHELF DIVIDERS PP - SIDE / BACK PANELS XB – X-BRACE (Back & Sides)

P

SH

AR XB

FP BP

SD

PP

OPEN UNIT

CLOSED UNIT

For heavy duty applications, welded box shelves are available.

Solid side and back panels are available to create closed shelving units.

Shelf dividers allow for multiple storage areas per shelf. Baseplates provide neat appearance and prevent dust

from collecting underneath units. Versatility allows for designing to customer requirements,

from light shelving storage to 2-tier high mezzanines. Shelving units are finished with rust inhibitor undercoating

and durable grey polymer powder coat finish for longevity.

7 of 10

KWIKERECT SHELVING

STORAGE SYSTEMS

ECONOMICAL QUALITY STEEL SHELVING SYSTEMS FOR OFFICE, INDUSTRIAL OR COMMERCIAL USE.

BOLTED OR BOLTLESS (EASILY ADJUSTABLE COMPRESSION CLIP TYPE) SHELVING.

INDIVIDUAL ACCESSORIES AVAILABLE TO MEET YOUR SPECIFIC STORAGE NEEDS.

ATTRACTIVE, DURABLE POWDER COAT FINISH.

ECONOMICAL WITH INDUSTRIAL STRENGTH AND DURABILITY CAPABLE OF SUPPORTING 2-TIER MEZZANINE OR CATWALK

VERSATILITY OF MODULAR COMPONENTS AND ACCESSORIES

OUR STRENGTH IS OUR PRODUCT www.northamericansteel.ca

KWIKERECT SHELVING

COMPONENTS

BACK & SIDE PANEL

OFFSET POST

FLANGED SHELF

BEADED POST

BOXED SHELF

ANGLE REINFORCEMENT

BASEPLATE

BASEPLATE (Beaded Post only)

GUSSET

SHELF CLIP

STANDARD FOOTPLATE (Galvanized)

SHELF DIVIDER

BEADED FOOTPLATE (Galvanized)

NUTS & BOLTS

SIDE X-BRACE

Use a pair of cross braces on each alternative back and side for open type shelving. Sizes are nominal, specify by shelf depth and width. For units higher than 99”, one pair of braces are required for each side and back (priced per pair).

Available in sizes 6’3” up to 12’3”., in 12 inch increments. Cannot be used as a common post.

Common beaded post in the front offers full width accessibility to shelves for ease of removal.

Fornt and back edges have return bends for easy slide in installation and provide maximum storage.

Reinforcements increase shelf capacity. They bolt into front and back lip of shelf panel.

Full height dividers are used to segment shelf levels for storage of individual items. Angle bent top, bottom and back, with rolled edge front. Used primarily with closed type shelving.

Use combination of these heights & allow for 2” overlap.

Example: 2 of 39” - Fit 75” Posts 1 of 39” - Fit 87” Posts 2 of 51” - Fit 99” Posts

Create a finished look and simplify floor cleaning. Channel construction provides strength and neat appearance.

Four clips are required Per shelf on intermediate levels. Top and bottom shelves must be bolted.

3” gussets can be used in place of braces. Each unit requires 8 gussets.

To simplify floor cleaning and provide a clean look. Channel construction provides strength & neat appearance. For use with optional beaded post only.

Foot plates are required on carpet or tiled floor areas, or when lagging to the floor is required.

Footplates can be used for posts, either side by side or back to back as one common footplate.

5 of ¼” pan head nuts and bolts are provided per shelf at no additional charge.

Front & back edges have channels and corners are welded for heavy duty applications.

E-mail: sales@naseco.ca Toll Free: 1-800-735-4153

KWIKERECT SHELVING

ASSEMBLY COMPONENTS

FEATURES OF BOLTED AND BOLTLESS SHELVING

Basic Kwikerect unit consists of four offset angle posts, steel shelves, side & back braces and compression clips.

Bolted and Boltless shelving systems offer strength and durability and are ideal for warehouses and stockrooms.

Easily assembled and adjusted for changing requirements without dismantling the unit.

In the Boltless Kwikerect system the shelf is easily snapped between compression clips and posts.

Shelves are adjustable on 1” centres. Flanged shelves are channel formed for strength. Additional

shelf reinforcements can be added to increase shelf capacity or for impact resistance.

P - POST SH - SHELF AR - ANGLE REINFORCEMENT FP - FOOTPLATE BP - BASE PLATE SD - SHELF DIVIDERS PP - SIDE / BACK PANELS XB – X-BRACE (Back & Sides)

P

SH

AR XB

FP BP

SD

PP

OPEN UNIT

CLOSED UNIT

For heavy duty applications, welded box shelves are available.

Solid side and back panels are available to create closed shelving units.

Shelf dividers allow for multiple storage areas per shelf. Baseplates provide neat appearance and prevent dust

from collecting underneath units. Versatility allows for designing to customer requirements,

from light shelving storage to 2-tier high mezzanines. Shelving units are finished with rust inhibitor undercoating

and durable grey polymer powder coat finish for longevity.

8 of 10

www.northamericansteel.ca

KWIKERECT SHELVING

TYPES OF UNITS

OPEN SHELF UNIT

Kwikerect open shelf units provide economical storage space; but have the strength and durability for industrial use.

The Back and Side braces provide added stability and can be alternated, if installed in rows of several units.

Shelving components are finished with rust inhibitor undercoating and a durable grey polymer powder coat finish.

MODULAR DRAWER SHELF UNIT

Modular drawers in shelving are usually installed between knee and chest height for contents to be more conveniently reached and for better visibility than in stationary cabinets.

Extra bulk storage space is available – above and below – when placing drawers into shelving unit, requiring only the same floor space as a cabinet.

Full extension drawers provide for more compact and better identified storage plus easier retrieval of small tools / parts.

Drawers can be installed and moved to any level and can be incorporated into your existing 24” deep shelving, using NAS adapter rails.

Features & Benefits: All extension drawers, installed on roller glides, allow full access to back of the drawer. Adjustable partitions and dividers for precise storage and inventory control are available.

DIVIDER UNIT

Bolted in shelf dividers offer the flexibility to easily separate, organize and identify the locations of small parts and products. Full height dividers are used to segment shelf levels and storage of individual items. Angle bend top, bottom and back, with folded and flattened front edge. Used primarily with closed type shelving.

Bin divider units can be used individually or in continuous configurations.

CLOSED SHELVING UNIT WITH BIN BOXES Back and sides of closed type shelving provide additional stability while giving greater protection to the contents.

This unit is most popular for bin box storage, for small parts storage and picking.

It can be used along or in conjunction with other units providing a finished look at the end of rows.

OTHER PRODUCTS FROM NORTH AMERICAN STEEL

ROLLFORMED RACKING

EASYUP 5000 SHELVING

EASYUP 7000 SHELVING

WIDESPAN 4000 SHELVING

KWIKERECT SERIES 6000 BOLTED & BOLTLESS SHELVING

NORTH AMERICAN STEEL

NORTH AMERICAN STORAGE

300 Hopkins Street, Whitby, Ontario Canada L1N 2B9Phone: (905) 668-3300Toll Free: (800) 735-4153 Email: sales@naseco.caFax: (905) 668-5477 Web: www.naseco.ca

2103 - 7th Street, Nisku, Alberta Canada T9E 7Y3Phone: (780) 955-2444Toll Free: (800) 241-8968 Email: sales@naseco.comFax: (780) 955-3463 Web:

With 60 Years

Manufacturing Experience

NORTH AMERICAN STEEL

is the leading name for

Innovative Storage Ideas

NORTH AMERICAN STEEL

300 Hopkins Street, Whitby, Ontario Canada L1N 2B9Phone: (905) 668-3300TollTT Free: (800) 735-4153 Email: sales@naseco.caWith 60 YeaYY rs

www.naseco.com

NORTH AMERICAN STEELNORTH AMERICAN STEEL

9 of 10

www.northamericansteel.ca

KWIKERECT SHELVING

TYPES OF UNITS

OPEN SHELF UNIT

Kwikerect open shelf units provide economical storage space; but have the strength and durability for industrial use.

The Back and Side braces provide added stability and can be alternated, if installed in rows of several units.

Shelving components are finished with rust inhibitor undercoating and a durable grey polymer powder coat finish.

MODULAR DRAWER SHELF UNIT

Modular drawers in shelving are usually installed between knee and chest height for contents to be more conveniently reached and for better visibility than in stationary cabinets.

Extra bulk storage space is available – above and below – when placing drawers into shelving unit, requiring only the same floor space as a cabinet.

Full extension drawers provide for more compact and better identified storage plus easier retrieval of small tools / parts.

Drawers can be installed and moved to any level and can be incorporated into your existing 24” deep shelving, using NAS adapter rails.

Features & Benefits: All extension drawers, installed on roller glides, allow full access to back of the drawer. Adjustable partitions and dividers for precise storage and inventory control are available.

DIVIDER UNIT

Bolted in shelf dividers offer the flexibility to easily separate, organize and identify the locations of small parts and products. Full height dividers are used to segment shelf levels and storage of individual items. Angle bend top, bottom and back, with folded and flattened front edge. Used primarily with closed type shelving.

Bin divider units can be used individually or in continuous configurations.

CLOSED SHELVING UNIT WITH BIN BOXES Back and sides of closed type shelving provide additional stability while giving greater protection to the contents.

This unit is most popular for bin box storage, for small parts storage and picking.

It can be used along or in conjunction with other units providing a finished look at the end of rows.

OTHER PRODUCTS FROM NORTH AMERICAN STEEL

ROLLFORMED RACKING

EASYUP 5000 SHELVING

EASYUP 7000 SHELVING

WIDESPAN 4000 SHELVING

KWIKERECT SERIES 6000 BOLTED & BOLTLESS SHELVING

NORTH AMERICAN STEEL

NORTH AMERICAN STORAGE

300 Hopkins Street, Whitby, Ontario Canada L1N 2B9Phone: (905) 668-3300Toll Free: (800) 735-4153 Email: sales@naseco.caFax: (905) 668-5477 Web: www.naseco.ca

2103 - 7th Street, Nisku, Alberta Canada T9E 7Y3Phone: (780) 955-2444Toll Free: (800) 241-8968 Email: sales@naseco.comFax: (780) 955-3463 Web:

With 60 Years

Manufacturing Experience

NORTH AMERICAN STEEL

is the leading name for

Innovative Storage Ideas

NORTH AMERICAN STEEL

300 Hopkins Street, Whitby, Ontario Canada L1N 2B9Phone: (905) 668-3300TollTT Free: (800) 735-4153 Email: sales@naseco.caWith 60 YeaYY rs

www.naseco.com

NORTH AMERICAN STEELNORTH AMERICAN STEEL

10 of 10