tender boq

Upload: arun-kumar-k

Post on 02-Jun-2018

338 views

Category:

Documents


11 download

TRANSCRIPT

  • 8/10/2019 Tender Boq

    1/36

    1

    AHMEDABAD MUNICIPAL CORPORATION

    (HOUSING PROJECT)

    TENDER

    For

    CONSTRUCTION OF FIRE STATION AND

    RESIDENTIAL QUARTERS

    AT ASLALI, AHMEDABD.

    VOLUME-II REVISED PRICE BID

    Municipal CommissionerAhmedabad Municipal Corporation.

    Sardar Patel Bhuvan, Dana pith,

    AHMEDABAD 380 001

  • 8/10/2019 Tender Boq

    2/36

    Sr.

    No.Items

    Total Quoted Amount

    Rs.

    A CIVIL WORK 45,641,329.90

    B ELECTRICAL WORK 6,370,681.00

    TOTAL 52,012,010.90

    Signature of Contractor

    Date

    City Engineer

    AMC

    Estimated Amount put to tender Rs.5,20,12,010.90

    Add_____% above Rs __________

    Total Rs___________

    In words______________________________

    ______________________________________

    Estimated Amount put to tender Rs. 5,20,12,010.90

    Deduct_____% below Rs __________

    Net Rs__________

    In words______________________________

    ______________________________________

    SUMMARY OF PRICE SCHEDULE COST

    CONSTRUCTION OF FIRE STATION AND RESIDENTIAL QUARTERS

    AT ASLALI, AHMEDABD.

    I/We am/are willing to carry out work at __________% above/below (should be written in figures and words) the

    estimated amount mentioned above. Amount of my/our tender works out as under

    Page 1 Summary Sheet

  • 8/10/2019 Tender Boq

    3/36

    Item

    No.Description Quantity Unit Rate Rs. Amount Rs.

    ( 1 ) ( 2 ) ( 3 ) ( 4 ) ( 5 ) ( 6 )

    Excavation and Filling Work

    1 Excavation in all sorts of Hard Soil including soft

    murram, for any activity but not limited for,

    foundation of wall, columns, Ground beams, raft,

    ducts, pipe trenches, U.G. Tank, Compound walls,steps, drains and all other miscellaneous excavation

    etc. as per specifications including shoring

    shuttering, bail ing out surface water, pumping of

    water, including backfilling in all types foundation

    trenches, compacting and consolidating etc

    complete, rate includes conveyance charges of

    remaining surplus earth from site as directed with

    the any lead in the city as directed by Clerk-of-

    Work.

    Up to 1.5 Mt. Depth 2495.00 cum 106.50 265,717.50

    From 1.5 Mt to 3.0 Mt depth 761.00 cum 111.42 84,790.62

    From 3.0 Mt to 5.0 Mt depth 360.00 cum 116.02 41,767.20

    Filling

    2 Filling in plinth with sand under floors including

    watering, ramming, consolidating and dressing etc.

    complete. 556.00 cum 220.00 122,320.00

    Cement Concrete Work

    3 Providing and laying Plain cement concrete 1:4:8 (1

    cement : 4 coarse sand : 8 hand broken stone

    aggregate 40mm nominal size) and curing complete

    excluding cost of formwork in foundation and plinth647.00 cum 1689.00 1,092,783.00

    Reinforced Cement Concrete Work

    4 Providing and laying controlled cement concrete M-

    250 and curing complete including cost of formwork

    and excluding the cost of reinforcement for

    reinforced concrete work in:

    (A) Foundations, footings, base of columns, and

    mass concrete. 84.00 Cu.M. 4007.00 336,588.00

    (B) Walls from top of foundations/level up to floor

    two level. 201.00 Cu.M. 4484.00 901,284.00

    (C) Slabs, landing shelves, Balconies, lintels,

    beams, girders, and cantilever, up to floor two level.365.00 Cu.M. 4676.00 1,706,740.00

    5 Providing and laying controlled cement concrete M-

    200 work and curring etc.complete including cost of

    formwork but excluding the cost reinforcement for

    reinforced concrete workat all levels in

    BILL OF QUANTITIES FOR FIRE STATION AT ASLALI, AHMEDABAD.

    Page 2 Abstract Sheet

  • 8/10/2019 Tender Boq

    4/36

    Item

    No.Description Quantity Unit Rate Rs. Amount Rs.

    ( 1 ) ( 2 ) ( 3 ) ( 4 ) ( 5 ) ( 6 )

    RCC Walls 224.00 cum 4112.00 921,088.00

    RCC beams 869.00 cum 3974.00 3,453,406.00

    RCC slabs 749.68 cum 3974.00 2,979,228.32

    RCC Columns 151.00 cum 4278.00 645,978.00

    Staircase 61.00 cum 4365.00 266,265.00

    6 Charges for making holes in RCC wallsDiameter of holes from 300 to 1500 mm clear and

    above 12.00 No. 6000.00 72,000.00

    Reinforcement Steel Work

    7 Provindig Thermo Mechanically Treated bars (TMT

    BARS) confirming to IS 1786/Fe 415 for R.c.c

    Works includings brndings, binding and placing in

    position complete. 280575.00 Kg 36.50 10,240,987.50

    Brick Masonary

    8 Brick work using common burnt clay building bricks

    having crushing strength not less than 35 kg/sq.cm

    in cement mortar 1:5 (1Cement : 5 fine sand)

    -

    A in foundation upto plinth 71.00 cum 1479.00 105,009.00

    9 Brick work using burnt clay building bricks for

    conventional brickwork having crushing strength not

    less than 35 kg/sq.cm in cement mortar 1:5

    (1Cement : 5 fine sand) -

    B for all levels in super structure 565.00 cum 1556.00 879,140.00

    10 Half Brick work using burnt clay conventional

    building bricks for exposed brick work having

    crushing strength not less than 35 kg/sq.cm in

    cement mortar 1:4 (1Cement : 4 coarse sand)

    -

    B for all levels 4406.00 Sq.Mt. 280.00 1,233,680.00

    -

    WATER PROOFING

    11 Providing and laying integral cement based water

    proofing treatment avrage120 mm thick including

    preparation of surface as required for treatment of

    roof,balconies,terraces and making necessary vata

    at the junction of Wall and floor wherever required

    as directed by Engineer In Charge and consisting

    of following operation .For Payment only Flat Area

    Considered.Including ten years performance of

    guarantee bond to be given.

    1644.00 Sq.Mt. 400.00 657,600.00Applying and grouting a slurry coat of neat cement

    using 2.75 kg/Sq.Mt. Of cement admixed with

    proprietary water proofing compound conforming to

    IS .2645 over tha RCC slab including cleaning the

    surface before treatment.

    -

    Page 3 Abstract Sheet

  • 8/10/2019 Tender Boq

    5/36

    Item

    No.Description Quantity Unit Rate Rs. Amount Rs.

    ( 1 ) ( 2 ) ( 3 ) ( 4 ) ( 5 ) ( 6 )

    Laying cement concrete using broken

    bricks/brickbats25 mm to 100 mm size with 50% of

    cement mortar 1:5 ( 1 cement , 5 coarse

    sand)admixed with proprietary water proofing

    compound conforming to IS 2645 over 20 mm thick

    layer of cement mortar of mix 1:5 (1

    -

    After two days of proper curing applying a second

    coat of cement slurry admixed with proprietary water

    proofing compound confirming to IS 2645

    -

    Finishing the surface with 20 mm thick jointles

    cement mortar mix 1:4 ( 1 cement, 4 coarse sand)

    admixed with proprietary water proofing compound

    conforming to IS: 2645 and finally finishing the

    surface with trowel with neat cement slurry and

    making of -

    The whole terrace so finished shall be flooded with

    water for a minimum period of two weeks for curing

    and for final test.all above operations to be done in

    order and as directed and specified by Engineer -In-

    charge -

    12 Providing, Fill ing cinder or any such similar l ight

    weight material at any lead incl. watering

    consolidating etc.complete as per direction of

    engineer incharge. 798.00 Cu.M. 375.00 299,250.00

    -

    Wood work and joinery

    13 Providing and fixing 35 mm th. Shutters for doors

    windows & clearstory windows incl. wood frames

    as specified 10 cm. x 7cm. size incl. Indian teak

    wood frames 10 cm to 7 cm. size incl. anodised

    alluminium fixtures and fastenings including primer

    coat of approved quality and two coats of oil paint

    etc. complete.

    -

    B Fully panelled 234.00 Sq.Mt. 3338.00 781,092.00

    C Partly panelled partly glazed 73.00 Sq.Mt. 3121.00 227,833.00

    14 Providing and fixing flush door shutters soild

    coreconstruction with frame of firstclass hard wood

    with cross band & face veneer or plywood face

    panels etc. incl. Anodised alluminium butt hinges

    with necessary screws,

    -

    (B) Non decorative type & block board core

    anodised alluminium butt hinges ib flush door

    shutters -

    35mm thick 14.00 Sq.Mt. 1569.00 21,966.0015 providing and fixing glazed louverd glass window

    and ventilator with teak wood frame 10 cm x 7 cm.

    Size incl. 3 coats of oil painting to wood work etc.

    complete. 461.00 Sq.Mt. 2473.00 1,140,053.00

    -

    Page 4 Abstract Sheet

  • 8/10/2019 Tender Boq

    6/36

    Item

    No.Description Quantity Unit Rate Rs. Amount Rs.

    ( 1 ) ( 2 ) ( 3 ) ( 4 ) ( 5 ) ( 6 )

    Steel, Aluminium and Iron Works

    16 providing and fixing M.S. flats to wooden/aluminium

    frames of windows etc. with M.S. flats if requierd at

    required spacing and frame alround square and

    nuts or by screws

    -

    (a) plain grill 420.00 K.g. 50.00 21,000.00

    -

    17 Providing and Fixing 30 mm th. Approved standed

    brand factory made PVC rigid foam panaled door

    shutter manufactured by made from Ms tube 19

    Gauge th. Size 19X 9 mm for styles and 15 X 15

    mm top & bottom rail covered with heat molded

    PVC C chanal of 5mm thick sheet and 30 X 50 mm

    wide to foam styles and 5 mm th. and 75 mm PVC

    sheet for top rail , rock rail and bottom rail on ethier

    side and 5 mm th., 20 mm wide cross PVC sheet as

    gape insert for top rail and bottom rail, paneling of 5

    mm th. PVC sheet filled in the MS frame welded/

    shield to the styles and rails manufacture

    applications and directions of engineer in chargefixed to frames with three nos stainless steel hinges

    (four inch long) incl. medium grade hardeware all

    octroi, tax charges etc. complete.(Approved rate)

    48.00 Sq. M. 2213.00 106,224.00

    18 Providing and Fixing Approved standed brand

    factory made PVC door frame size 50 X 47 mm

    with a wall th. 5mm made out of extruded 5 mm rigid

    pvc foam sheet mitered at corners as jointed with 2

    no. of 150 mm long brackets of 15 X 15 M.S.

    square tube the vertical door profiles to be

    reinforced with 19 X 9 mm M.S. square tube of 19

    Gauge, EPDM rubber gasket weather seal seal to

    be provided through out the frame. The door frame

    to be fixed to the wall using M.S. screws of 65/100

    mm size etc. complete as per manufacturers

    specifications and direction of engineering in chare

    incl. medium grade aluminum hardware all all

    octroi, tax charges etc. complete.(Approved rate)

    95.00 Rmt 301.00 28,595.00

    19 Providing & fixing in position collaspsible steel

    shutter with vertical channels of 20x10x2 mm

    braced with flat iron diagonals of 20x5mm size withtop and bottom rails of T iron 40 x 40 x 6mm with 38

    mm Dia. Steel pulleys complete with bolts, nuts,

    locking arrangement, stoppers, handles, including

    applying a priming coat of red lead paint.

    9.00 Sq.Mt. 2575.00 23,175.00

    Page 5 Abstract Sheet

  • 8/10/2019 Tender Boq

    7/36

    Item

    No.Description Quantity Unit Rate Rs. Amount Rs.

    ( 1 ) ( 2 ) ( 3 ) ( 4 ) ( 5 ) ( 6 )

    Paving and floor finishes

    20 Providing and laying white glazed tiles 6mm thick in

    flooring , treads of steps & landing laid on a bed of

    12 mm tk. Cement mortar1:3 (1Cement : 3coarse

    sand) and flush pointing in white cement slurry

    539.00 Sq.Mt. 649.00 349,811.00

    21 Providing & laying 10 mm thick vitri fied tiles with a

    size 600 mm X 600 mm in flooring, treads of steps

    and landing on a bed of 12mm thk. Cement mortar

    1:3 (1 cement:3 coarse sand finished with flush

    pointing in approved coloured cement Slurry)

    780.00 Sq.Mt. 1345.00 1,049,100.00

    22 Providing & laying polished kota stone slab of

    various sizes ,miror polished flooring over

    20mm(avg.) thk. Base of cement mortar 1:6(1

    cement: 6 coarse sand) laid over and jointed with

    grey cement slurry incl. Rubbing and polishing etc.

    complete.

    25mm thick 1867.00 Sq.Mt. 713.00 1,331,171.00

    23 Providing & laying polished kota stone slab 25 mmthk. In skirtings, window sills, planter top and risers

    of steps on 10mm(avg.) thk. Base of cement mortar

    1:3(1 cement: 3 coarse sand) laid over and jointed

    with grey cement slurry incl. Rubbing and polishing

    etc. complete.

    20.00 Sq.Mt. 739.00 14,780.00

    24 Providing and laying white glazed tiles 6 mm tk. In

    skirting, risers of steps and dedo on 10 mm th.

    Cement plaster 1:3 ( 1 cement : 3 coarse sand ) &

    jointed with white cement slurry etc. complete

    681.00 Sq.Mt. 656.00 446,736.00

    25 Providingand laying China mosaic flooring using

    broken pieces of white and coloured glazed tiles

    as per design including bedding in cement mortar1 : 6 (1 cement : 6 coarse sand) and white

    cement pointing complete

    1150.00 Sq.Mt. 220.00 253,000.00

    26 providing & laying cement cocrete flooring 1:2:4 laid

    in one layer finished with a floating coat of neat

    cement(50 MM Thck) 880.00 Sq.Mt. 182.00 160,160.00

    27 Providing & laying rough kota stone slab of various

    sizes flooring over 20mm(avg.) thk. Base of cement

    mortar 1:6(1 cement: 6 coarse sand) laid over and

    jointed with grey cement slurry incl. Rubbing and

    polishing etc. complete.

    104.00 Sq.Mt. 555.00 57,720.00

    28 Provoding and laying precast concerete paver blockflooring with 90mm thk. M-60 strength and colur

    precast concrete paver block of approved make and

    colour in road & parking filling of joints, making bed

    surface of min. 75 mm const. Sand smooth etc.

    complete 817.00 Sq.Mt. 550.00 449,350.00

    29 providing & laying Mosaic tiles flooring 20 to 25mm

    thick over 20mm(avg.) base of cement

    mortar1:6)under Pergo wooden flooring in

    gymnasium. 300.00 Sq.Mt. 400.00 120,000.00

    Page 6 Abstract Sheet

  • 8/10/2019 Tender Boq

    8/36

    Item

    No.Description Quantity Unit Rate Rs. Amount Rs.

    ( 1 ) ( 2 ) ( 3 ) ( 4 ) ( 5 ) ( 6 )

    30 Providing and fixing in floor ,Laminated flooring of

    Armstrong, pergo or euivalent company. Colours

    and design as approved by the architect in

    Gymnasium Area. 300.00 Sq.Mt. 1030.00 309,000.00

    White washings,colour washings distempring

    and other finishes

    31 Providing and appling 3 coats of white wash to all

    surfaces as per Detailed specifications including

    necessary scaffolding,scrapping etc. complete.if

    additional coats are required to obtain uniform finish

    the same shall be carried out at no extra cost. as

    directed by the clerk- of- work.at alll ift, levels and

    leads.32907.00 Sq.Mt. 3.10 102,011.70

    32 Wall painting (two coats) with solvent based flat

    paint of approve brand and manufacture on new

    wall surface to give an even shade incl. Throughly

    brushing the surface free from mortar droppings and

    othere foreign matter and sand prepared smooth

    etc. complete.

    20.00 Sq.Mt. 41.60 832.0033 Finishing wall with waterproofing cement paint of on

    wall surface (two coats) to give an approved brand

    and manufacture and of required shape even shade

    after throughly brushing the surface to remove all

    dirt and remains of loose powdered materials.

    208.00 Sq.Mt. 25.40 5,283.20

    Painting and polishing

    34 Painting two coats including priming coat on

    external surfaces of rain water, soil, waste and vent

    pipes & fittings with ready mixed bituminuous paint

    brushing, black anti corrosive to give an even shade

    incl. Cleaning of all dirt, dust and other foreign

    matter.

    (B) 75 mm dia 25.00 Rmt. 8.90 222.50

    (C) 100 mm dia 250.00 Rmt. 11.10 2,775.00

    35 Providing and applying two coat of Anti-funges and

    Anti-moss Acrylic co polymer based exterior paint

    including providing and apply one coat of primer

    recommended by paint menufacturar on smooth

    finished or sand-faced surfaces at all levels &

    heights. With two or more coats (up to finish) of

    approved make and shade on new work to give an

    even shade. Rate includes cost of providing, and

    erecting all necessary scaffolding,prepare &

    cleaning the wall surfece, brushes, removal of the

    same after completion of work, cleaning all surfaces

    like floor, Door - Window etc Complete as per

    directed by Clerk-Of-Work for all Lifts, level,

    leads.NS.

    2391.00 Sq.Mt. 87.00 208,017.00

    36 Polishing with French polish on new wood-wood

    base surface to give an even surface incl. Clening

    the surface to all dirts, dust and sand papered

    smooth & incl. A coat of wood filler.

    25.00 Sq.Mt. 55.80 1,395.00

    Page 7 Abstract Sheet

  • 8/10/2019 Tender Boq

    9/36

    Item

    No.Description Quantity Unit Rate Rs. Amount Rs.

    ( 1 ) ( 2 ) ( 3 ) ( 4 ) ( 5 ) ( 6 )

    Miscellaneous building items

    37 Providing and fixing Sintex Water Tank of approved

    capacity on prepared floor as directed by engineer

    incharge at site. 15000.00 Ltrs 3.50 52,500.00

    38 Anti termite treatment as per IS 6313 dosagesand application procedures shall confirm to

    manufractures instructions.

    Providing and injecting Chemical emulsion with

    Chloropirifos emulsifiable concentrate 1 % in

    column pots, wall trenches,treatment to back fil l

    R.C.C walls and column top surface of plinth

    filling,junction of wall and floor ,external perimeter of

    building, over DPC ,under aprons and foundations

    and other critical areas.Plinth area to be measured.

    10 years Guarantee to be given by the agency

    1286.00 Sq.Mt. 63.90 82,175.40

    39 Providing and Fixing in Positions Slidinng M.S. Gate

    As Per Size&Design complete with bolts, nuts,locking arrangement, stoppers handles including

    applying a priming coat of red lead paint.

    1435.00 Kg 200.00 287,000.00

    40 Providing & constructing 20 mm wide & full depth

    Expansion joint including providing 20mm th

    Expansion board ( Shalitex or equivelant brand )

    painted with bitumen on both sides and fil ling the

    joint with polysulphide sealent material (20mm x

    30mm ) or equivalent, fixing M.S. Dowell bar

    painted with bitumen upto full length & one side

    25mm pvc(1.5mm thick) rigid pipe with plug as

    per the given detailed drawing and Directed by

    Clerk- of-Work.etc complete for all level and

    leads.

    121.00 Rmt. 300.00 36,300.00

    41 Providing & fixing of aluminium composite panel

    supported on Aluminium Section Grid of size 38mm

    X 25mm weight 0.33 Kg per Rmt. of Jindal section &

    Grid work supported to the wall by means of

    M.S/Aluminium Clamps. Aluminium Composite

    Panel of make Alstrong/Aludecor/Timex/Inobond of

    4.0 mm thick made out of two aluminium skin of

    0.25 mm thick which are precoated and thermally

    bonded to each side of non toxic polythelene core.

    Adhesion achieved by combination of chemical &

    mechanical actions there by provide exceptional

    resistance to delamination. This aluminium

    composite panel shall be fabricated in tray form &

    fixed to the aluminium grid by aluminium cleats. Gapbetween two trays shall be filled with 8 dia/10 dia

    backer road and top layer shall be covered by

    Ultraproof of GE or 789 0f Dowcorning.alongwith

    backing coat plaster of 15 mm th. in cement : 1 : 4

    to obtain true line & plumb.(RA-15)

    865.00 Sq.Mt. 3000.00 2,595,000.00

    Page 8 Abstract Sheet

  • 8/10/2019 Tender Boq

    10/36

    Item

    No.Description Quantity Unit Rate Rs. Amount Rs.

    ( 1 ) ( 2 ) ( 3 ) ( 4 ) ( 5 ) ( 6 )

    DEMOLOTION & DISMANTING

    42 Demolition and disposal of unserviceable materials

    with all leads and lifts

    (i) Lime concrete Cu.M 122.40 -

    (II) Unreinforced cement concrete 10.00 Cu.M 1407.00 14,070.00

    43 Demolition of brick work and stone masonryincluding stacking of serviceable materials and

    disposal of unserviceable materials with all leads

    and lifts

    (II) In cement mortar 100.00 Cu.M 127.30 12,730.00

    44 Demolition of terrace incl. stacking of serviceable

    materials and disposal of unservicable materialswith

    all lead lift.

    (I) Brick tile covering 10.00 Sq.M 14.80 148.00

    45 Dismantling tiled or stone floors laid in mortar

    including stacking of serviceable material and

    disposal of uservicalble material with all lead and

    lifts 100.00 Sq.M 11.20 1,120.00

    46 Dismantling steel work including dismembering and

    stacking the materials with all leads and lifts.20.00 Kg. 0.90 18.00

    47 The dismantling doors windows ventilatlation etc.

    (wood or steel ) shutters including chowkhats

    architraves hold fasts and other attachments etc.

    complete and stacking them within all lead & lifts

    (I) Not exceeding 3 Sq.M. in area 35.00 Sq.m 43.90 1,536.50

    48 Dismantling santary, fitting, lime washbasin, W.C.

    pan indian and eqropian type flushing tank etc..

    Stacking the materials with all lead and lift.

    10.00 Each 95.00 950.00

    49 Scraping oil paint from steel and other metal surface

    and making the surface even (with hand scraping)

    10.00 Sq.M 11.40 114.00

    Page 9 Abstract Sheet

  • 8/10/2019 Tender Boq

    11/36

    Item

    No.Description Quantity Unit Rate Rs. Amount Rs.

    ( 1 ) ( 2 ) ( 3 ) ( 4 ) ( 5 ) ( 6 )

    Plaster and Pointing Wrok

    50 Providing and laying, 20 mm thick double coat

    Mala plaster to the Internal side of walls, Beams,

    Columns, pardi , ceiling , chajja & RCC walls etc in

    the proportion of cement mortar 1:4 for first coat (12

    mm thick) and cement mortar 1:2 for second coat (8

    mm thick) to all types and shapes of bricks, stones

    or RCC surfaces at all respective levels in line, level

    and plumb including normal straps, grooves, drip

    moulds, embossed bands, jambs, etc. complete and

    including roughening the surfaces with necessary

    scaffolding, curing, cleaning the floor after

    application, providing & fixing chicken wire mesh of

    24 gauge of 300 mm width at the junction of brick

    work & RCC work including fixing with nails, rawl

    plugs etc before applying plaster as per

    drawing/instruction of Clerk- Of-Work etc. complete.

    For all levels, hights and leads of works.

    32907.00 Sq.Mt. 135.00 4,442,445.00

    51 Providing and laying, 20 mm thick double coat

    Mala plaster OR "sand face(Tippani)" plaster to

    the External side of walls, Beams, Columns, pardi &

    RCC walls etc in the proportion of cement mortar

    1:4 for first coat (12 mm thick) and cement mortar

    1:2 for second coat (8 mm thick) to all types and

    shapes of bricks, stones or RCC surfaces at all

    respective levels in line, level and plumb including

    normal straps, grooves, drip moulds, embossed

    bands, jambs, etc. complete and including

    roughening the surfaces with necessary scaffolding,

    curing, cleaning the floor after application, providing& fixing chicken wire mesh of 24 gauge of 300 mm

    width at the junction of brick work & RCC work

    including fixing with nails, rawl plugs etc before

    applying plaster as per drawing/instruction of Clerk-

    Of-Work etc. complete. For all levels, hights and

    leads of works.No holes in wall will be permitted for

    scaffolding. Only Double stage scaffloding is to be

    used.

    2391.00 Sq.Mt. 135.00 322,785.00

    51 Providing and laying 20mm thick waterproof plasterin two coats (12mm+8mm) in cement mortar (1:4)

    mix with recommended waterproofing compound in

    adequate quantity, all tools and tackels and

    scaffolding, curing etc. complete.

    461.10 Sq.Mt. 170.00 78,387.14

    Page 10 Abstract Sheet

  • 8/10/2019 Tender Boq

    12/36

    Item

    No.Description Quantity Unit Rate Rs. Amount Rs.

    ( 1 ) ( 2 ) ( 3 ) ( 4 ) ( 5 ) ( 6 )

    Water supply,plumbing,drainage and sanitary

    fittings:

    52 Providing and fixing to wall ceiling and floor

    galvanised mild steel tubes (medium grade) of the

    following nominal bore tube fitting and clamps inc.

    making good the wall,ceilling and floor .

    50mm dia G.I. Pipe 9.00 Rmt 384.00 3,456.00

    40mm dia G.I. Pipe 150.00 Rmt 283.00 42,450.00

    25mm dia G.I. Pipe 200.00 Rmt 193.00 38,600.00

    15mm dia G.I. Pipe 125.00 Rmt 112.00 14,000.00

    53 providing and fixing cast iron spigot and socket soil,

    waste and ventilating pipes of the following nominal

    size.

    B. 75mm Dia. 150.00 Rmt 615.00 92,250.00

    C. 100 mm Dia 200.00 Rmt 712.00 142,400.00

    54 providing and fixing in position cowl vent to pipes

    B. 75mm Dia. 12.00 no. 269.00 3,228.00

    C. 100 mm Dia 12.00 no. 368.00 4,416.0055 Providing and fixing 40mm dia. gun metal check or

    non return full way wheel valve in pipeline of

    approved quality etc. complete as directed by

    Engineer Incharge. 5.00 Nos. 628.00 3,140.00

    56 Providing and fixing 25mm dia. gun metal check or

    non return full way wheel valve in pipeline of

    approved quality etc. complete as directed by

    Engineer Incharge. 3.00 Nos. 349.00 1,047.00

    57 Providing and laying (two level or slopes) and

    jointing with stiff mixture of cement mortar in

    proportion 1:1 salt glazed stoneware pipes of

    following internal diameters inc. testing of pipes and

    joints etc. complete with necessary formwork and

    curing complete.150mm dia 90.00 Rmt 143.00 12,870.00

    100mm dia 46.00 Rmt 104.00 4,784.00

    58 Providing & fixing C.I.(spun) "Nanhi trap" of the

    following nominal diameter of self cleaning design

    with C.I.screwed down or hinged grating inc. Cost of

    cutting and making good the walls and floors

    100mm inlet and 50 mm outlet etc. complete as

    directed by engineer in charge.

    45.00 Nos. 252.00 11,340.00

    59 Providing & fixing washdown type water closet

    (Indian type) W.C. PAN size 580mm (earth work,

    bed concreting., foot rests and trap to be measured

    and paid for seperately.

    A)Vitreous china pattern.

    (1) Long pattebn white colour 4.00 Nos. 530.00 2,120.00

    Page 11 Abstract Sheet

  • 8/10/2019 Tender Boq

    13/36

    Item

    No.Description Quantity Unit Rate Rs. Amount Rs.

    ( 1 ) ( 2 ) ( 3 ) ( 4 ) ( 5 ) ( 6 )

    60 Providing & fixing Wall-mounted European Closet

    Suite P-Trap (White/Light Coloured) with Dual Flush

    Tank , PVC pan connector, seat & lid (heavy duty)

    including C.I. Brackets, C.P. brass hinges, All

    Internal fittings complete with rubber buffers, C.P.

    nuts, bolts, ChaKi, etc making holes in walls &

    floors, & finishing for ready to use.The rate includesProviding & fixing 15mm Angle Valve as per product

    detail with braided hose pipe as per product detail,

    including cutting and making good the wall where

    required.( Ewc wall hung-p(white/light coloured), or

    equivalent, Chair bracket : equivalent brand make,

    rag bolts, Dual Flush Cistern : equivalent, Angle

    cock: equivalent, Braided hose as per Design)

    38.00 Nos. 3500.00 133,000.00

    61 Providing and fixing 100 mm size 'P' or 'S' trap

    including jointing the trap with soil pipe in cement

    mortar 1:1.

    A)Vitreous china pattern. 45.00 Nos. 163.00 7,335.00

    62 Providing & fixing wash basin with single hole for

    pil ler tap with C.I. Or M.S. brackets painted white

    incl cutting holes and making good the same but

    excluding fitting.

    (i)Viterious China

    in white/colour washbasin 40.00 Nos. 814.60 32,584.00

    63 Providing and fixing G.I.inlet connections for flush

    pipe with W.c. Pan. 48.00 Nos. 19.70 945.60

    64 Providing and fixing C.P. brass wste for wash basin

    or sink. 28.00 Nos. 88.00 2,464.00

    65 Providing & fixing 600 mm x 450 mm bevelled edge

    mirror of superior glass mounted on 6mm thickA.C.sheet or plywood sheet and fixed to wooden

    plugs with C.P. brass screws and washers.

    36.00 Nos. 491.00 17,676.00

    66 Providing and fixing 15mm dia. brass polished

    bright screw down bib taps in pipeline of approved

    quality etc. complete as directed by Engineer

    Incharge 50.00 Nos. 135.00 6,750.00

    67 Providing & fixing piller taps,capstan head screw

    down high screw,shanks & back nuts.

    20mm dia 28.00 Nos. 227.00 6,356.00

    68 Providing & fixing chromium plated brass half turn

    flush cock of approved quality incl. Fixing in pipe

    line etc. complete.

    (I) 20 mm dia 17.00 Nos. 320.00 5,440.00(II) 25 mm dia 17.00 Nos. 349.00 5,933.00

    (III) 32 mm dia 11.00 Nos. 378.00 4,158.00

    69 Providing & fixing S.W. Gully trap with C.I grating

    brick masonary chamber andd water tight C.I cover

    with frame of 300mm x 300 mm size(inside) with

    standard weight.(square mouth trap)

    100 mm x 100mm size p-type 20.00 Nos. 809.00 16,180.00

    Page 12 Abstract Sheet

  • 8/10/2019 Tender Boq

    14/36

    Item

    No.Description Quantity Unit Rate Rs. Amount Rs.

    ( 1 ) ( 2 ) ( 3 ) ( 4 ) ( 5 ) ( 6 )

    150mm x 100 mm size p or r type 15.00 Nos. 815.00 12,225.00

    70 Providing and fixing Liquid shop desposer stand in

    toilet area. 10.00 Nos. 125.00 1,250.00

    71 Providing and Fixing Full height mirror (1800x900mm) bevelled edge mirror of superior

    glass mounted on 6mm thick A.C.sheet or plywood

    sheet and fixed to wooden plugs with C.P. brass

    screws and washers. in general toilet.

    36.00 Nos. 750.00 27,000.00

    72 Providing and laying to level and slopes and jointing

    reinforced concrete non-pressure pipes I.S. class

    NP 2 of the following internal diameter with collars

    and butt ends prepared for collar joints including

    testing of joints complete(24.22)SOR-2008-2009

    [B] 150mm 125.00 Metre 258.00 32,250.00

    [C] 250mm 25.00 Metre 383.00 9,575.00[D] 300mm 50.00 Metre 451.00 22,550.00

    73 Construction manhole with R.C.C. top slab in 1:2:4

    (1 cement :2 coarse sand :4 graded stone

    aggregate 20mm nominal size) foundation concrete

    1;3:6 mix (1 cement : 3 coarse sand :6 brickbats 40-

    50mm thick with cement mortar 1:5 (1 cement :5

    coarse sand) finished with a floating coat of neat

    cement and making channel in cement concrete

    1:2:4 ( 1cement : 2 coarse sand : 4 Stone aggregate

    20 mm nominal size ) finished smooth complete

    including curing and testing

    (a) inside size 900mm x 1200 mm and 1.5m deep

    including C.I. cover with frame size 650mm

    diameter total weight of cover and frame to be not

    less than 128kgs. (wt of cover 64kg. And wt. Of

    frame 64kg.)

    with 230mm thick wall of brick masonry using bricks

    having crushing strength not less than 35 kg/sq.cm.

    In cement mortar 1:5 (1 cement : 5 coarse sand)

    (ii) B type depth1.50 meter for 150mm diameter

    sewer 12.00 No. 13479.00 161,748.00

    74 (i) Extra rate for constructing B.B. masonry for

    every additional depth of O.I.M. or part thereof overitem 24.27 [i] depth from 0.9m to 1.5m

    (i) Extra rate for constructing B.B. masonry only for

    every additional depth of 0.1m or part thereof over

    item

    (ii) for depth from 1.50 to 2.25m 12.00 No. 302.00 3,624.00

    75 Providing and fixing cast iron steps of size 500mm x

    150mm x 22.5 and pointing with two coats of

    anticorrosive paint etc. complete 192.00 No. 109.00 20,928.00

    Page 13 Abstract Sheet

  • 8/10/2019 Tender Boq

    15/36

    Item

    No.Description Quantity Unit Rate Rs. Amount Rs.

    ( 1 ) ( 2 ) ( 3 ) ( 4 ) ( 5 ) ( 6 )

    76 Providing & Fixing CI manhole cover

    0.60mtX0.45mt size having weight not less than 35

    KG. 12.00 No. 1058.00 12,696.00

    External & Landscaping work

    77 Supplying and fixing reinforced concrete heavy dutynon-pressure pipes of 300 mm dia with collars for

    culverts carrying heavy traffic as per Indian railway

    station specification including the setting the pipes

    in C.M. 1:2 watering and laying ( to level or slopes)

    of class NP3 of the following internal diameters(RA-

    20)

    143.00 R.M 990.00 141,570.00

    78 Providing supplying and fixing precast concrete

    road side kerb block of 300 mm x300mm x100mm

    as per the approved drawing and design cement

    concrete precast block shall be cast from M-20

    grade concrete the rate including necessary cutting

    of asphalt road excavation in all types of soil and

    metal etc.and removing the excavated stuff complet

    rate also include filling the gap of curb with sand

    consolidation etc. complte and levelled including

    painting of joints with cement concrete in cement

    mortart 1:2 and racking of joints as per design etc.

    complte the rate shall including painting of kerb with

    white washing of theee coats etc. complte.(RA-22)

    825.00 R.M 85.00 70,125.00

    79 Providing & Laying vaccum dewatering flooring

    method for RCC road with broom finish or with

    power driven trowel finish surface of conc. The

    conrete is 1:2:4 of 10cm thickness and 8 mm TMT

    at 200 c/c(RA-24)1825.00 Sq.m 550.00 1,003,750.00

    80 Providing soak pit as per detailed drawing, including

    excavating sand filling brick bats with dry masonry

    work at top including covering the top with stone

    including providing vatas in C.M. 1:3 with finishing

    curing etc. complete as directed.

    2.00 no. 100000 200,000.00

    81 Constructing storm water chamber, including

    excavating and sand filling, with bricks having

    crushing strength not less than 35kg/cm2 in CM

    1.5., including C.I. cover with grating, with frame

    (l ight duty) 610 mm x 610mm internal dimensions

    total weight of cover with frame to be not less than

    38kg (wt. of cover 23kg. and wt. of frame 15kg)

    foundation concrete 1:5:10 inside plaster 15mm

    thick with cement mortar 1:3 finished smooth with a

    floating coat of neat cement on walls and bed

    concrete etc. complete

    10.00 no. 6500.00 65,000.00

    [a] Inside dimensions 610mm x 610mm and depth

    up to 1200 mm

    Page 14 Abstract Sheet

  • 8/10/2019 Tender Boq

    16/36

    Item

    No.Description Quantity Unit Rate Rs. Amount Rs.

    ( 1 ) ( 2 ) ( 3 ) ( 4 ) ( 5 ) ( 6 )

    82 Providing and constructing, Underground (U/G)

    sump for rain water, of specified capacity, on

    specified location, for all depths, in controlled CC of

    M-200 grade with bottom slab, top slab and RCC

    walls, including cost of form work and

    reinforcement, with inside and outside plaster in CM

    1 :3 and water proofing treatment as per IWPspecification, including injection, grouting, etc.

    complete. The rate includes for providing and fixing

    specified nos. 0.6 m. x 0.6 m. size 35 Kg. CI

    manhole cover/s at top, including wash out pipe line

    and inlet and outlet connections etc. complete.

    200000.00 litre 5.5 1,100,000.00

    83 Constructing Septic Tank, 2.10m X 0.9m X 1.3m

    liquid depth, as shown and mentioned in the

    detailed plumbing drawings and structural drawings.

    2.00 no. 32000 64,000.00

    84 Supplying and fixing Kirlosker or equivalent make

    open well horizontal monoset submersible pump of

    following specifications with suction and delivery of

    50 mm or 65 mm dia of approved make with all

    connections making foundation with suitable motor,

    full automatic star-delta starter, complete panel,

    ammeter, voltmeter, etc., dry running and single

    phasing prevention devices, etc. complete.

    2.00 no. 17500 35,000.00

    (A) Approx. 1.5 H.P., 300 lpm at 30 mt head

    85 Providing and fixing, 15 mm. dia. GI hydrant, for

    gardening, at required distance, with 25 mm. dia.

    wheel valve / ball valve of approved make, as

    recommended or equivalent and GI pipe piece to

    provide the hydrant, 300 mm. above dressed

    ground level, including excavation, making

    connections with main lines, specials, i f required

    etc. complete, as directed.

    5.00 no. 758 3,790.00

    86 Borewell work

    1 Drilling by rotary mud flush method in all type of

    alluvial soil, the drilling shall be done by mud flush

    rotary equipment and stores to be provided by the

    contractor. Bore shall be round and shall stand

    unceased for at least 72 hours.

    a 180 mt depth & 350 mm dia 180.00 Rmt 432.00 77,760.00

    2 LOWERING OF PIPES

    Pipes shall be lowered in such a manner as not to

    damage either the pipes or mud wall of the bore if

    pipes are dropped or mud wall damaged casing

    heading of sand then cost of bore shall be

    recovered from contractor

    a 150 mm dia ERW pipe 4.70 mm thick ISI make

    180.00 Rmt 1700.00 306,000.00

    Page 15 Abstract Sheet

  • 8/10/2019 Tender Boq

    17/36

    Item

    No.Description Quantity Unit Rate Rs. Amount Rs.

    ( 1 ) ( 2 ) ( 3 ) ( 4 ) ( 5 ) ( 6 )

    Pipes shall be lowered in such a manner as not to

    damage either the pipes or mud wall of the bore if

    pipes are dropped or mud wall damaged casing

    heading of sand then cost of bore shall be

    recovered from contractor.

    A 50 mm upvc dia column pipe of heavy quality as per

    IsI requirement & of approved quality 150.00 Rmt 240.00 36,000.00

    4 Labour for cutting of slot on pipes. 35.00 Rmt 150.00 5,250.00

    i) 63 mm x 5.7 mm x 4.7 mm as per ISI 8100 -

    5 A) CEMENT SEALING : 1.00 Unit 12000.00 12,000.00

    Cement sealing shall be provided in the annual

    space between the wall of naked bore hole & outer

    surface of piping to prevent saline water from upped

    acquire to lower acquire by gravel packing etc.

    cement sealing shall be done with cement slurry

    (including cost of cement) injected by mud pump

    through air line pipe at desired depth of about 20

    feet and sounding of gravel should be taken

    perfectly.

    6 GRAVEL PACKING : 10.00 Cmt 1550.00 15,500.00

    Gravel packing shall be done slowly and slowly,

    gravel should be from hard rock durable and

    uniform in size duly screed by mechanical vibrator.

    Gravel packing should be continue till filter is

    constructed around the pipes so as to see that no

    sand flow into the wall under operational condition

    of the well.

    7 DEVELOPMENT : 3.00 hr 5900.00 17,700.00

    A) The development of bore by air compressor

    should be done in such a way that each water

    bearing zone is developed in deaning order

    separate by compressed air pumping etc. a

    discharging shall be sand free.

    8 Electrical logging and water analysis for selection of

    water bearing zone and its possibility.

    1.00 Job 13900.00 13,900.00

    9 Cost of providing and fixing ball plug wall,cap. MS

    clamps chappals etc 1.00 Job 12300.00 12,300.00

    10 Providing & fixing KSB make 12.5 H.P. & 16 stage

    Submersible Pump & Accessaries 1.00 Nos 42000.00 42,000.00

    11 Providing & fixing 2.5 sqmm cable of finolex make

    150.00 Rmt 84.00 12,600.00

    Page 16 Abstract Sheet

  • 8/10/2019 Tender Boq

    18/36

    Item

    No.Description Quantity Unit Rate Rs. Amount Rs.

    ( 1 ) ( 2 ) ( 3 ) ( 4 ) ( 5 ) ( 6 )

    12 Providing & fixing pump pannel of standard make

    with necessary cables 1.00 Nos 11000.00 11,000.00

    87 Rain harvesting work

    1 Excavation for foundation upto 1.5M depth including

    sorting out and stacking of useful materials and

    disposing of the excavated stuff up to 50 meter

    lead.

    Loose or soft soil 64.00 cum 38.60 2,470.40

    Dense or hard Soil 0.00 cum 49.40 -

    2 Excavation for foundation for depth from 1.5 mt. to

    3.0 mt. including sorting out and stacking of useful

    materials and disposing of the excavated stuff up to

    50 meter lead.

    Loose or soft soil 23.00 cum 42.80 984.40

    Dense or hard Soil 0.00 cum 53.60 -

    3 Excavation for foundation for depth from 3.0 mt. to

    5.0 mt. including sorting out and stacking of useful

    materials and disposing of the excavated stuff up to

    50 meter lead.Loose or soft soil 33.00 cum 47.00 1,551.00

    Dense or hard Soil 0.00 cum 57.80 -

    4 Add extra for disposdig off the excavated stuff of

    above item for lead of:

    (A) 50 mt. To 100 mt. 22.00 cum 51.12 1,124.64

    (B) 100 mt. To 200 mt. 22.00 cum 51.12 1,124.64

    (C ) 200 mt. To 300 mt. 22.00 cum 51.12 1,124.64

    5 Providing and laying Plain cement concrete 1:3:6 (1

    cement : 3 coarse sand : 6 hand broken stone

    aggregate 40mm nominal size) and curing complete

    excluding cost of formwork in :

    (A) Foundation and plinth 5.00 cum 1536.00 7,680.00

    6 Supplying & filling FINE sand in filter beds for

    preparation of filter bed upto average 5.0 mt.depth

    below surrounding average ground level including

    cost of sand, transporation for all leads, loading

    unloading, spereading in layers as specified below.

    loose thick ness at all depths dressing and levelling

    dewatering sub soil or rain water if any etc.

    5.00 cum 375.00 1,875.00

    7 Supplying & filling GRAVEL in filter beds for

    preparation of filter bed upto average 7.0 mt.depth

    below surrounding average ground level including

    cost of gravel, transporation for all leads, loading

    unloading, spereading in layers as specified below.

    loose thick ness at all depths dressing and levellingdewatering sub soil or rain water if any etc.

    (A) 3 to 6 mm 1.00 cum 1050.00 1,050.00

    (B) 6 to 20 mm 2.00 cum 1050.00 2,100.00

    (C ) 20 to 40 mm 2.00 cum 1050.00 2,100.00

    (D) 40 to 60 mm 2.00 cum 1050.00 2,100.00

    Page 17 Abstract Sheet

  • 8/10/2019 Tender Boq

    19/36

    Item

    No.Description Quantity Unit Rate Rs. Amount Rs.

    ( 1 ) ( 2 ) ( 3 ) ( 4 ) ( 5 ) ( 6 )

    8 Supplying & filling BOULDERS around central

    water trough in a layer of 200 mm thick. In fillter

    bed

    2.00 cum 525.00 1,050.00

    9 Filling available excavated earth (excluding rock) in

    plinth, sides of foundation etc. in layers not

    exceeding 20 cm. In depth consolidating each

    deposited layer by ramming and watering.

    35.00 cum 24.80 868.00

    10 providing, lowering, laying & jointing in true line and

    level 110 mm dia 4 kg/cm2 working pressure rigid

    PVC pips for filter bed to bore well line fitted

    consealed including all necessary fitt ing such as

    bend, shoe bend etc. including testing of pipes &

    joints fixing the same with PVC clips at 2.00 meters

    c/c & jointed wih adhesive solvent cement including

    the cost of all materials, fixing air and water tight

    testing the line etc. complete as directed.

    (a) 150 MM DIA. 20.00 RMT 295.50 5,910.00

    Total for all Items 45641329.90

    Page 18 Abstract Sheet

  • 8/10/2019 Tender Boq

    20/36

    1 Internal Wiring 1,995,400.00

    2 Distribution Boards 512,920.00

    3 Cable Trench 461,250.00

    4 Cable Tray ( Not Applicable ) NA

    5 MV Cabling 387,810.00

    6 Cable Termination 8,376.00

    7 MV Switchgear 105000.00

    8 Light Fixtures and Fans 1,440,925.00

    9 Earthing 79,400.00

    10 Lightning Arrestor ( Not Applicable ) NA

    11 Telephone & Data Distribution 409,200.00

    12 P.A. System 115,350.00

    13 Street lighting 445,000.00

    14 Miscellaneous 410,050.00

    TOTAL FOR ELECTRIFICATION 6,370,681.00

    REBET @ ____ %

    NET TOTAL ELECTRICAL WORKS 6,370,681.00

    BOQ FOR ELECTRIFICATION OF FIRE ATATION AT ASLALI

    Section

    No.Electrical Works Amount

    Page 19 Abstract Sheet

  • 8/10/2019 Tender Boq

    21/36

    1.0 Internal Wiring

    All the wiring, outlet points shall be done in a

    surface / concealed manner with ISI approved

    medium duty, rigid FR PVC, ISI conduit of

    minimum 25 mm. dia. using 650 V FRLS copper

    conductor wire, modular switches with suitable

    plate, PVC / Metal back box with brass chromium /cadmium plated machine screws etc.

    1.1 Point Wiring

    1.1.1 Wiring for the following light points with 1.5

    sq.mm FRLS flexible copper conductor 1100

    volts grade wires of approved make in

    concealed or surface mounted 25 mm dia

    medium guage PVC Conduit including providing

    and fixing of 6 amps single pole rocker operated

    flush mounted switch of approved quality colour

    make & design in 2 mm thick GI box and

    earthing of fixtures and the outlet box with 1.5

    sq.mm PVC insulated copper conductor

    stranded flexible "FRLS" wire.

    a Primary Light point controlled by one single way 6

    A switch.530.00 no 800.00 424,000.00

    b Primary light point controlled by one SP MCB 30.00 no 650.00 19,500.00

    c Secondary light point controlled by same

    switch / MCB 120.00 no 400.00 48,000.001.1.2 Wiring for the 2 way controlled light

    points with 1.5 sq.mm FRLS flexible copper

    conductor 1100 volts grade wires of

    approved make in concealed or surface

    mounted 25 mm dia medium guage PVC

    Conduit including providing and fixing of 2

    Nos. 6 amps 2 way rocker rocker operatedflush mounted switch of approved quality

    colour make & design in 2 mm thick GI box

    and earthing of fixtures and the outlet box

    with 1.5 sq.mm PVC insulated copper

    conductor stranded flexible "FRLS" wire.

    a Primary light point controlled by two, two way 6 A

    switch 13.00 no 1,200.00 15,600.00

    b Secondary light point controlled by same switch

    12.00 no 750.00 9,000.00

    SECTION

    NO.DESCRIPTION QTY UNIT Rate Total

    Page 20 Abstract Sheet

  • 8/10/2019 Tender Boq

    22/36

    1.1.3 Wiring for the Ceiling Fan points with 1.5

    sq.mm FRLS flexible copper conductor

    1100 volts grade wires of approved make

    in concealed or surface mounted 25 mm

    dia medium guage PVC Conduit including

    providing fan hook box, 6 amps switch and

    300 watts electronic hum free fan regulator

    of approved quality colour make & design in

    2 mm thick GI box and earthing of

    fixtures and the outlet box with 1.5 sq.mmPVC insulated copper conductor stranded

    flexible "FRLS" wire.

    200.00 no 1,000.00 200,000.00

    1.1.4 Wiring for the 250 volts single phase

    and neutral 6 amps switched socket outlet

    with 2.5 sq.mm FRLS flexible copper

    conductor 1100 volts grade wires of

    approved make in concealed or surface

    mounted 25 mm dia medium guage PVC

    Conduit including providing and fixing of 6

    amps 5 pin switch socket outlet of approved

    quality colour make & design in 2 mm thick

    GI box and earthing of fixtures and the

    outlet box with 1.5 sq.mm PVC insulatedcopper conductor stranded flexible "FRLS"

    wire.a One 6 A x 5 pin 250 Volt socket outlet point

    controlled by one 6 A switch located on board. 230.00 no 300.00 69,000.00

    b 6 A x 5 pin 250 Volt switched socket outlet point at

    convenient location. 550.00 no 850.00 467,500.00

    1.1.5 Wiring for the 250 volts single phase

    and neutral 16 amps switched socket

    outlet with 2.5 sq.mm FRLS flexible copper

    conductor 1100 volts grade wires of

    approved make in concealed or surface

    mounted 25 mm dia medium guage PVC

    Conduit including providing and fixing of 16

    amps 5 pin switch socket outlet of approvedquality colour make & design in 2 mm thick

    GI box and earthing of fixtures and the

    outlet box with 1.5 sq.mm PVC insulated

    copper conductor stranded flexible "FRLS"

    wire. 60.00 no 950.00 57,000.001.1.6 DO - as 1.1.5 but with4 sq.mm wire for phase &

    Neutral & 2.5 sq. mm for Earthing 90.00 no 1,150.00 103,500.00

    1.1.7 -Do- as 1.1.6 but With 20 Amp DP switch and

    socket at different location 5.00 no 1,200.00 6,000.00

    Page 21 Abstract Sheet

  • 8/10/2019 Tender Boq

    23/36

    1.1.8 Wiring for thesingle phase and neutral

    20 amps polycarbonate industrial 3 pin (IP

    65/66) socket outlet with 20 amps double

    pole MCB in a poly carbonate enclosure

    with 4 sq.mm FRLS flexible copper

    conductor 1100 volts grade wires of

    approved make in concealed or surface

    mounted 25 mm dia medium guage PVC

    Conduit including providing and fixing of 16

    amps socket in poly carbonate enclosure andearthing of third pin of the socket and

    withDP MCB of approved quality colour make

    & design in 2 mm thick GI box /

    polycarbonate enclosure and earthing of

    fixtures and the outlet box with 2.5 sq.mm

    PVC insulated copper conductor stranded

    flexible "FRLS" wire. 4.00 no 1,200.00 4,800.001.1.9 Wiring for the Three phase and neutral

    32 amps polycarbonate industrial 5 pin (IP

    65/66) socket outlet with 32 amps Four pole

    MCB in a poly carbonate enclosure with 4

    x 4 sq.mm FRLS flexible copper conductor

    1100 volts grade wires of approved make

    in concealed or surface mounted 25 mmdia medium guage PVC Conduit including

    providing and fixing of 32 amps socket in poly

    carbonate enclosure and neutral & earthing

    pin of the socket and with FP MCB of

    approved quality colour make & design in 2

    mm thick GI box / polycarbonate enclosure

    and earthing of fixtures and the outlet box

    with 2 nos. of 2.5 sq.mm PVC insulated

    copper conductor stranded flexible "FRLS"

    wire.

    5.00 no 4,000.00 20,000.00

    1.1.10 Wiring for the Exhaust fan point with 1.5

    sq.mm FRLS flexible copper conductor 1100

    volts grade wires of approved make inconcealed or surface mounted 25 mm dia

    medium guage PVC Conduit including providing

    and fixing of 6 amps flush mounted switch at the

    normal switch level in 2 mm thick GI box and 6

    amps 3 pin flush mounted socket out of near

    exhaust fan and earthing of exhaust fan through

    the third pin of the socket outlet of approved

    quality colour make & design in 2 mm thick GI

    box and earthing of fixtures and the outlet box

    with 1.5 sq.mm PVC insulated copper

    conductor stranded flexible "FRLS" wire.

    80.00 no 900.00 72,000.00

    Page 22 Abstract Sheet

  • 8/10/2019 Tender Boq

    24/36

    1.1.11 Wiring for the Bell point with 1.5 sq.mm

    FRLS flexible copper conductor 1100 volts

    grade wires of approved make in concealed or

    surface mounted 25 mm dia medium guage PVC

    Conduit including providing and fixing of 6 amps

    flush mounted Bell switch in 2 mm thick GI box of

    approved quality colour make & design in 2 mm

    thick GI box and earthing of fixtures and the

    outlet box with 1.5 sq.mm PVC insulated

    copper conductor stranded flexible "FRLS" wire.

    40.00 no 900.00 36,000.00

    1.1.12 Supply and laying of 25 mm rigid PVC pipe of 1.6-

    1.8 mm thickness 2,000.00 rmt 33.00 66,000.00

    1.3 RACEWAYS & JUNCTION BOX

    Providing and fixing 2 mm thick steel sheet factory

    fabricated post galvanized raceway with internal

    partition of the following sizes including providing

    removable 3 mm thick GI cover, knock out holes

    and fixing accessories earthing with 8 SWG

    copper earth wire complete as required including

    floor supports, bends, access boxes, tap off boxes

    and cross over as per specification and site

    requirement.

    1.3.1 SITC of 100mm x 50 mm PVC Raceway with all

    Accessary &Hardware. 25.00 mtr 500.00 12,500.00

    1.4 MAINS : ( not for Point wiring )

    1.4.1 Supplying and Laying of mains with Cu. PVC

    insulated flexible wire with ISI and FIA approval for

    650 V/ 1100 V with earth wires of Cu. PVC

    insulated flexible wires with ISI approval for 650 V/

    1100 V as earth wires to be drawn in Suitable dia

    rigid PVC Pipe of Heavy Guage

    1.4.1.1 Supplying and Laying of 4 nos. of 25 sq mm Cu.

    flexible wires with 2 nos 6 sqmm Cu. flexible wires

    to be drawn in 1 nos. of 65 mm dia Pipe30.00 mtr 2,000.00 60,000.00

    1.4.2 Supplying and Laying of mains with FRLS Cu.

    PVC insulated flexible wire with ISI and FIA

    approval for 650 V/ 1100 V with earth wires of

    FRLS Cu. PVC insulated flexible wires with ISI

    approval for 650 V/ 1100 V as earth wires to be

    drawn in Suitable dia rigid PVC Pipe of Heavy

    Guage

    1.4.2.1 Supplying and Laying of 4 nos. of 10 sq mm Cu.

    flexible wires with 2 nos 6 sqmm Cu. flexible wires

    to be drawn in 2 nos. of 40 mm dia Pipe

    50.00 mtr 500.00 25,000.00

    1.4.2.2 Supplying and Laying of 4 nos. of 6 sq mm Cu.

    flexible wires with 1 nos 4 sqmm Cu. flexible wires

    to be drawn in 40 mm dia Pipe 50.00 mtr 400.00 20,000.00

    1.4.2.3 Supplying and Laying of 2 nos. of 10 sq mm Cu.

    flexible wires with 1 nos 6 sqmm Cu. flexible wires

    to be drawn in 40 mm dia Pipe 50.00 mtr 270.00 13,500.00

    1.4.2.4 Supplying and Laying of 2 nos. of 6 sq mm Cu.

    flexible wires with 1 nos 4 sqmm Cu. flexible wires

    to be drawn in 40 mm dia Pipe 50.00 mtr 225.00 11,250.00

    Page 23 Abstract Sheet

  • 8/10/2019 Tender Boq

    25/36

    1.4.2.5 Supplying and Laying of 2 nos. of 4 sq mm Cu.

    flexible wires with 1 nos 2.5 sqmm Cu. flexible

    wires to be drawn in 25 mm dia Pipe 50.00 mtr 175.00 8,750.00

    1.4.2.6 Supplying and Laying of 2 nos. of 2.5 sq mm Cu.

    flexible wires with 1 nos 2.5 sqmm Cu. flexible

    wires to be drawn in 25 mm dia Pipe 50.00 mtr 100.00 5,000.00

    1.4.2.7 Supply & Laying of 1.5 sq mm x 3 core round

    flexible wire in prelaid pipe / Raceway. 70.00 mtr 50.00 3,500.00

    1.4.2.8 Supply & Laying of 2.5 sq mm x 3 core round

    flexible wires in prelaid pipe / Raceway. 50.00 mtr 70.00 3,500.00

    1.4.2.9 Supply & Laying of 4 sq mm x 4 core round

    flexible wires in prelaid pipe / Raceway. 100.00 mtr 120.00 12,000.00

    1.4.2.10 Supply & Laying of 6 sq mm x 3 core round

    flexible wires in prelaid pipe / Raceway. 1,350.00 mtr 150.00 202,500.00

    Sub Total 1.0..... 1,995,400.00

    2.0 Distribution Board

    Supply, Assembling, grouting, levelling Connecting

    & testing D.B of IP 43 of specified make.

    2.1 Distribution Board-TPN

    2.1.1 Supply, Erecting, testing and commissioning of

    only TPN D.B. PPI type with space for FPMCB as

    incoming and space for DPELMCB and 12

    SPMCB as outgoing per phase (i.e. 16 way per

    phase D.B.) 1.00 no 7,500.00 7,500.002.1.2 Supply, Erecting, testing and commissioning of

    only TPN D.B. PPI type with space for FPMCB as

    incoming and space for DPELMCB and 8 SPMCB

    as outgoing per phase (i.e. 12 way per phase D.B.)

    5.00 no 6,500.00 32,500.00

    2.1.3 Supply, Erecting, testing and commissioning of

    only TPN D.B. PPI type with space for FPMCB as

    incoming and space for DPELMCB and 4 SPMCB

    as outgoing per phase (i.e. 8 way per phase D.B.)

    4.00 no 4,500.00 18,000.00

    2.1.4 Supply, Erecting, testing and commissioning of

    only TPN D.B. PPI type with space for FPMCB as

    incoming and space for DPELMCB and 2 SPMCB

    as outgoing per phase (i.e. 6 way per phase D.B.)

    1.00 no 4,000.00 4,000.002.2 Distribution Board-SPN

    2.2.1 Supply, Erecting, testing and commissioning of

    SPN D.B. PPI type with space for DPELMCB as

    incoming and 12 SPMCB as outgoing per phase

    (i.e. 16 way D.B.) 3.00 no 2,500.00 7,500.00

    2.2.2 Supply, Erecting, testing and commissioning of

    SPN D.B. PPI type with space for DPELMCB as

    incoming and 8 SPMCB as outgoing per phase

    (i.e. 12 way D.B.) 39.00 no 1,800.00 70,200.00

    2.2.3 Supply, Erecting, testing and commissioning of

    SPN D.B. PPI type with space for DPELMCB as

    incoming and 4 SPMCB as outgoing per phase

    (i.e. 8 way D.B.) 1.00 no 1,500.00 1,500.00

    2.2.4 Supply, Erecting, testing and commissioning of

    SPN D.B. PPI type with space for DPELMCB as

    incoming and 2 SPMCB as outgoing per phase

    (i.e. 6 way D.B.) 1.00 no 1,200.00 1,200.00

    2.3 MCB

    2.3.1 6 to 32 A SP MCB 528.00 no 160.00 84,480.00

    2.3.2 40 A SP MCB 1.00 no 310.00 310.00

    2.3.3 63 A SP MCB 1.00 no 310.00 310.00

    2.3.4 6 to 32 A DP MCB 39.00 no 440.00 17,160.00

    2.3.5 40 A DP MCB 4.00 no 700.00 2,800.00

    Page 24 Abstract Sheet

  • 8/10/2019 Tender Boq

    26/36

    2.3.6 63 A DP MCB 2.00 no 700.00 1,400.00

    2.3.7 25 A / 100 mA DP ELMCB 21.00 no 2,150.00 45,150.00

    2.3.8 32 A / 100 mA DP ELMCB 63.00 no 2,150.00 135,450.00

    2.3.9 40 A / 100 mA DP ELMCB 8.00 no 2,400.00 19,200.00

    2.3.10 63 A / 100 mA DP ELMCB 3.00 no 2,780.00 8,340.00

    2.3.11 25 A FP MCB 3.00 no 950.00 2,850.00

    2.3.12 32 A FP MCB 3.00 no 950.00 2,850.00

    2.3.13 40 A FP MCB 3.00 no 1,380.00 4,140.00

    2.3.14 63 A FP MCB 1.00 no 1,380.00 1,380.00

    2.3.15 Dual Channel Timer equivalent to Theben MakeTR612 TOP 2.00 no 1,500.00 3,000.00

    2.3.16 20 Amp DP Dinrail Mouned Contactor Equivalent 2.00 no 2,500.00 5,000.00

    2.3.17 40 Amp DP Dinrail Mouned Contactor Equivalent

    to MDS make Cat. No. 004068 2.00 no 3,000.00 6,000.00

    2.3.18 Sheet steel enclouser for DP MCB 41.00 no 200.00 8,200.00

    2.3.19 Sheet steel enclouser for FP MCB 10.00 no 250.00 2,500.00

    2.3.20 100 Amp. MCCB ( 25 KA ) with the Enclauser &

    Both Side Cable end Box with the Handle with

    Spreader Link 2.00 no 10,000.00 20,000.00

    Sub Total 2.0..... 512,920.00

    3.0 Cable Trench

    3.1 Excavation and back filling of cable trenches

    required for laying the cables directly buried in the

    ground. This includes supplying and providingcable markers at an interval of 10 meters. The

    depth shall be app 1mtr and the width shall be as

    per requirement 130.00 mt3 100.00 13,000.00

    3.2 Supplying and spreading fine sand for a thickness

    of 100 mm. and providing and laying bricks on all

    the three sides. 130.00 rmt 25.00 3,250.00

    3.3 Supplying all material for preparing Man hole of

    600 x 600 or 600 mm round hole 15.00 no 12,000.00 180,000.00

    3.4 Supplying all material for preparing Man hole of

    750 x 750 or 750 mm round hole 3.00 no 12,500.00 37,500.00

    3.5 Excavation and doing masionary work with plaster

    on all the wall three sides and providing metal

    RCC pre-cast slabs 35.00 mt3 6,500.00 227,500.00

    Sub Total 3.0..... 461,250.00

    5.0 CablesSupplying & laying of following 1100 volt grade

    XLPE insulated PVC sheathed aluminium /

    Copper conductor armoured cables as per

    specif ication in existing trenches, cable trays,

    ducts, over bed of sand, clamped to wall with

    suitable clamps including, saddles fixing bolts,

    connecting testing and commissioning with

    identification tags at every 10 mtr. & Both ends..

    5.1 35 sq.mm x 3.5 c Al. cable 50.00 mt 366.00 18,300.00

    5.2 25 sq.mm x 4 c Al. cable 200.00 mt 340.00 68,000.00

    5.3 25 sq.mm x 4 c Cu. cable 30.00 mt 1,150.00 34,500.00

    5.4 16 sq.mm x 4 c Al. cable 150.00 mt 290.00 43,500.005.5 16 sq.mm x 4 c Cu. cable 30.00 mt 747.00 22,410.00

    5.6 10 sq.mm x 4 c Cu. Cable 100.00 mt 326.00 32,600.00

    5.7 6 sq.mm x 4 c Cu. Cable 400.00 mt 383.00 153,200.00

    5.8 4 sq.mm x 4 c Cu. Cable 50.00 mt 306.00 15,300.00

    Sub Total 5.0..... 387,810.00

    6.0 Cable Termination

    Page 25 Abstract Sheet

  • 8/10/2019 Tender Boq

    27/36

    Cable end termination of the following XLPE

    insulated PVC sheathed aluminium/copper

    conductor armoured cables of 1100 volt grade

    including supplying and fixing of bimettalic Long

    neck crimping lugs, Brass glands with earthing.

    6.1 35 sq.mm x 3.5 c Al. cable 4.00 no 128.00 512.00

    6.2 25 sq.mm x 4 c Al. cable 6.00 no 156.00 936.00

    6.3 25 sq.mm x 4 c Cu. cable 6.00 no 166.00 996.00

    6.4 16 sq.mm x 4 c Al. cable8.00 no 150.00 1,200.006.5 16 sq.mm x 4 c Cu. cable 6.00 no 160.00 960.00

    6.6 10 sq.mm x 4 c Cu. Cable 8.00 no 124.00 992.00

    6.7 6 sq.mm x 4 c Cu. Cable 24.00 no 100.00 2,400.00

    6.8 4 sq.mm x 4 c Cu. Cable 4.00 no 95.00 380.00

    Sub Total 6.0..... 8,376.00

    7.0 MV Switchgear & Power Panels

    Design, fabrication, assembling, supply,

    installation, testing and commissioning of Main LT

    panel, Main Distribution Panels, Sub Distribution

    panels and Final Distribution panels suitable for

    415 V, 3 phase, 50 Hz, 4 wire power supply

    system.

    All large panels shall be provided with lifting

    hooks. Distribution panels shall be fabricated in

    accordance with the specifications.

    1.0 Supporting rigid steel framework.

    2.0 Cubicle type, 14 gauge CRCA sheet steel

    enclosed.

    3.0 Complete with interconnections and distribution

    bus bars.

    4.0 Proper bonding to earth.

    5.0 Painting/lettering on Breakers and distribution

    boards, the location they serve, providing on

    each panel its circuit diagram.

    6.0 Providing cable clamps / supports within

    distribution boards cable alley.

    7.0 TPN ACBs / MCCBs shall mean 3 pole ACBs /MCCBs with adequate size of neutral link.

    8.0 All MCBs shall be of minimum 10 KA breaking

    capacity.

    9.0 The breaking capacity of MCCBs are mentioned

    panel wise. All MCCBs shall be with thermal

    magnetic releases upto 250 amps and

    miroprocessor based

    above 250 amps capacity, unless specified

    otherwise.

    10.0 All motor feeders MCCBs shall be of motor duty.

    11.0 Distribution panels shall be Powder Coated with

    Siemens gray paint shade no. RAL-7032 of IS-5.

    12.0 Degree of protection for following type of

    distribution panel enclosure shall be as per

    IS:13947-1993.

    a. IP 52 for indoor panels.

    b. IP 54 for kitchen and laundry panels.

    c. IP 55 for outdoor panels.

    13.0 All MCCBs shall be provided with operating

    mechanism for door interlock & with the roraty

    handle.

    Page 26 Abstract Sheet

  • 8/10/2019 Tender Boq

    28/36

    14.0 Current density of aluminium shall be 1 sq mm for

    1.0 amps for rated current of bus bars and current

    density of copper shall be 1 sq.mm for 1.25 amps

    for rated current of bus bars.

    15.0 Tinned copper earth bus as specified in the BOQ

    shall be provided through out the length of each

    board.

    16.0 All measuring instruments (Meters) shall be of

    digital electronic with LED of approved make and

    compatible with BAS.

    17.0 All hinged door shall be earthed through 2.5 sq

    mm tinned braided copper wire.

    18.0 All panels shall have provision of the following:

    a. Pad locking of Switch board doors.

    b. Pad locking of MCCBs handles in OFF Position.

    19.0 Additional set of C.T.s, potential free contacts,

    connectors, contactors with wiring etc are to be

    provided for BAS including space required for

    various transducers

    in Main Switch Board sections. Only transducers

    shall be supplied by BAS contractor.

    20.0 All MCBs used for protection of resistive and

    lightly inductive load shall be type B

    characteristic and inductive (motor) load shall be

    of type C characteristic

    and discharge lamps and UPS etc. shall be of type

    D characteristic.

    21.0 All incoming and outgoing air circuit breakers shall

    be placed on middle portion of the vertical in

    single tier formation.

    22.0 All PTs / control transformer shall be provided with

    centre tap earth secondary.

    23.0 G.A. Drawing should be checked & Finalised by

    consultant before fabrication.

    7.1.1 SITC of Residencial Common Area Panel 1.00 no 55,000.00 55,000.00Incoming :

    100 Amp FP MCCB With Rotary Handle ( 16 KA )

    : 1 No.

    Metering : - 1 no. of Load Manager equivalent to

    Schneider make PM 210 with Appropriate CT of

    class 0.5 & Control Fuse

    1 no. of Digital type V, A, F meter with Appropriate

    CT of class 0.5 & Control Fuse Equivalent to

    Conserve Make ELF 3259

    RYB-On-Off LED type Indicating Lamp / incoming

    Busbar : Set of FP copper busbars of 100 amp

    EC. grade & adequate Capacity insulated with

    Heat shrinkable insulating sleeve & should be

    tinned at all joints.

    Outgoing :-

    40 amp FP MCB :- 2 nos (10 KA).

    32 amp FP MCB :- 1 nos (10 KA).

    Page 27 Abstract Sheet

  • 8/10/2019 Tender Boq

    29/36

    Drilling by rotary mud flush method in all type of

    alluvial soil, the drilling shall be done by mud flush

    rotary equipment and stores to be provided by the

    contractor. Bore shall be round and shall stand

    unceased for at least 72 hours.

    6 - 32 amp DP MCB :- 2 nos (10 KA).

    Panel should be as per SLD

    7.1.2 SITC of Fire Station Panel 1.00 no 50,000.00 50,000.00

    Incoming :

    100 Amp FP MCCB With Rotary Handle ( 16 KA )

    : 1 No.

    Metering : - 1 no. of Load Manager equivalent to

    Schneider make PM 210 with Appropriate CT of

    1 no. of Digital type V, A, F meter with Appropriate

    CT of class 0.5 & Control Fuse Equivalent to

    Conserve Make ELF 3259

    RYB-On-Off LED type Indicating Lamp / incoming

    Busbar : Set of FP copper busbars of 100 amp

    EC. grade & adequate Capacity insulated with

    Heat shrinkable insulating sleeve & should be

    tinned at all joints.

    Outgoing :-

    63 amp FP MCB :- 2 nos (10 KA).

    40 amp FP MCB :- 1 nos (10 KA).

    6 - 32 amp FP MCB:- 7 nos(10kA)

    Panel should be as per SLD

    Sub Total 7.0.. 105,000.00

    8.0 Light Fixtures & Fans

    8.1 A Supply, Install, Tesing and commissiong of light

    fixtures with Control Gear, lamps and fans with all

    necessary internal wiring.( Scope includes the

    necessary hardware for the installation of the Light

    Fixture concealed / Surface mounted)

    8.1.1 1 x 28 W Mirolta type light fixture with lamp

    equivalent to Philips make TGW 204/ 1 x TL5 28

    Watt. 400.00 no 633.00 253,200.00

    8.1.2 1 x 28 W Box Type fixture with electronic Hi-

    frequency ballast with 28W T5 tube equivalent to

    Philips make TMS 122 / 128

    150.00 no 1,150.00 172,500.00

    8.1.3 2 x 28 W Box Type fixture with electronic Hi-

    frequency ballast with 28W T5 tube equivalent to

    Philips make TMS 122 / 228 35.00 no 1,587.00 55,545.00

    8.1.4 2 x 28 W M/O Type fixture with electronic Hi-

    frequency ballast with 28W T5 tube equivalent to

    Philips make TCS 398 / 228 D6 HF 5.00 no 3,623.00 18,115.00

    8.1.5 1 x 11 W CFL MIROLTA type fixture with CFL

    equivalent to Philips make FMS 200/111

    80.00 no 518.00 41,440.00

    8.1.6 1x 18 watt CFL down light fitting with the Lamps &

    Choke equivalent to Philips make FCS 100 / 118

    5.00 no 920.00 4,600.00

    8.1.7 1 x 36 W IP65 Type fixture with electronic Hi-

    frequency ballast with 36W T8 tube equivalent to

    Philips make TCW 300 / 136 HF

    20.00 no 2,358.00 47,160.00

    Page 28 Abstract Sheet

  • 8/10/2019 Tender Boq

    30/36

    8.1.8 2x 18 watt CFL Wall light fitting with the Lamps &

    Choke equivalent to Wipro make WCP15218

    50.00 no 2,500.00 125,000.00

    8.1.9 1 x 150 Watt MH Type IP65 Flood Light Fitting

    with the 150 Watt MH Lamp Equivalent to Philips

    Make Cat. No. MWF 230 / 150 with control Gear

    5.00 no 4,773.00 23,865.00

    8.1B Street Light Fixture

    8.1B.1 Supply, installation, testing and commisioning of

    IP 65 protected 250 W MH / SON type fixtures

    aesthetically designed, made of pressure die cast

    alluminium housing ( LM6 grade ), Pot Optic

    reflector with heat resistant toughned glasscover &

    with a specially designed ribbed profile, High IP 65

    : Lamp Compartment confirm to IP65 ingress

    protection fully compliance with IEC598 &

    Applicable IS standard for Road Lighting

    luminaires use with SON-T PLUS PIA 250W lamp

    with 33200 LUMENS LAMP/ 250 w MH with lamp

    and control gear & complete to be fixed on the

    street light poles should be of top mounting type

    with toughened glass complete in all respect as

    per specification integral type equivalent to Philips

    Make Cat. No. Broadway-II CRP330 / SON-T 250

    Watt.

    8.00 no 7,200.00 57,600.00

    8.1B.2 Supply, installation, testing and commisioning of

    IP 65 protected 250 W MH / SON type fixtures

    aesthetically designed, made of pressure die cast

    alluminium housing ( LM6 grade ), Pot Optic

    reflector with heat resistant toughned glasscover &

    with a specially designed ribbed profile, High IP 65

    : Lamp Compartment confirm to IP65 ingress

    protection fully compliance with IEC598 &

    Applicable IS standard for Road Lighting

    luminaires use with SON-T PLUS PIA 250W lamp

    with 33200 LUMENS LAMP/ 250 w MH with lamp

    and control gear & complete to be fixed on the

    street light poles should be of top mounting type

    with toughened glass complete in all respect asper specification integral type equivalent to Philips

    Make Cat. No. Broadway-II CRP330 / SON-T 150

    Watt.

    15.00 no 6,900.00 103,500.00

    8.1B.3 Supply, installation, testing and commisioning of

    IP 65 protected 150 W MH / type CDMT METAL

    HALIDE fixtures aesthetically designed, made of

    pressure die cast alluminium housing ( LM6 grade

    ), Pot Optic reflector with heat resistant toughned

    glasscover & with a specially designed ribbed

    profile, High IP 65 : Lamp Compartment confirm to

    IP65 ingress protection fully compliance with

    IEC598 & Applicable IS standard for Road Lighting

    luminaires use with CDM-T PLUS PIA 150W lamp

    with 33200 LUMENS LAMP/ 150 w MH with lampand control gear & complete to be fixed on the

    street light poles should be of top mounting type

    with toughened glass complete in all respect as

    per specification integral type equivalent to Philips

    Make Cat. No. BERLIN CDS570/CDM-T 150 Watt.

    5.00 no 20,000.00 100,000.00

    Page 29 Abstract Sheet

  • 8/10/2019 Tender Boq

    31/36

    8.2 Supply, Installation, testing and commissioning of

    Fans ( Energy saving ) without fan regulator.

    8.2.1 36" dia sweep high speed high breeze ceiling fans

    white in colour. 5.00 no 1,250.00 6,250.00

    8.2.2 48" dia sweep high speed high breeze ceiling fans

    white in colour. 200.00 no 1,450.00 290,000.00

    8.2.3 56" dia sweep high speed high breeze ceiling fans

    white in colour. 5.00 no 1,650.00 8,250.00

    8.2.4 Additional fan rod made out of 10 guage painted

    GI pipe with all required accessories for fan 30.00 Rmt 50.00 1,500.00

    8.4 Exhaust Fans :

    8.4.1 SITC of light duty 225 mm. diameter propeller 5.00 no 1,400.00 7,000.00

    8.4.2 SITC of light duty 305 mm. diameter propeller

    exhaust fans with louvers 80.00 no 1,500.00 120,000.00

    8.4.3 SITC of heavy duty 450 mm. diameter propeller

    exhaust fans 3.00 no 1,800.00 5,400.00

    Sub Total 8.0..... 1,440,925.00

    9.0 Earthing

    9.1 Providing and laying of following tined copper / GI

    plate electrode, with 2 Nos 50 x 6 mm copper

    strips from earth plate electrode to inspectionchamber, 50 mm dia medium class GI pipe, CI

    funnel with 20 gauge GI wire mesh, masonry

    chamber 1000 x 500 mm with concrete base C I

    heavy duty / chequered plate manhole cover with

    frame painted with bitumastic paint and packing

    with mixture of charcoal and common salt around

    plate electrode including digging of pit upto

    permanent moisture level and as per soil condition

    but not less than 3 meters and back filling as

    required.

    9.1.1 600 x 600 x 3.15 mm cu.plate no 10,000.00

    9.1.2 450 x 450 x 3.15 mm cu. plate no 8,500.00

    9.1.3 600 x 600 x 3.15 mm GI plateno 7,500.009.1.4 450 x 450 x 3.15 mm GI plate 4.00 no 6,500.00 26,000.00

    9.2 Earth wire/strips :Supply and laying cu. earthing strips for

    interconnecting the earthing stations, panels, DB's

    etc. in built up trenches, on walls/ceiling, buried in

    ground generally as specified and shown on

    drawings complete with : fixing accessories

    Corrosion protection of buried conductors with

    bituminous coating and covered with PVC tapes.

    9.2.1 50 x 6 mm cu. Tape mtr 1,050.00

    9.2.2 32x 6 mm cu. Tape mtr 450.00

    9.2.3 25 x 3 mm GI. Tape 150.00 mtr 300.00 45,000.00

    9.2.4 No.8 gauge bare cu. earth wire 150.00 mtr 50.00 7,500.009.3 Earth Link : 40mm x 6 mm earth link fixed by 2.00 no 450.00 900.00

    Sub Total 9.0..... 79,400.00

    11.0 Telephone Distribution

    Providing and instal ling of al l conduiting and

    structured cabling for telephone system including

    providing and fixing of the following:

    1.0 All necessary specials and fittings

    Page 30 Abstract Sheet

  • 8/10/2019 Tender Boq

    32/36

    2.0 Approved cover plates for inspection, junction

    and outlet boxes.

    3.0 2 mm thick outlet boxes and junction boxes.

    4.0 All fixing accessories such as clips, nails, screws

    etc.

    5.0 Providing and fixing approved saddles, hooks and

    grouting the same as required, in the case of al l

    exposed conduit work.

    6.0 Embedding conduits and accesssories in wall,

    floors etc. during construction and / or cutting

    chases and making good as necessary in the

    case of all concealed conduit work.

    11.1 Supply, installat ion, testing and commissioning of

    Krone make Protector panel with swivel input stub

    and splice chamber as required, for the incoming

    P & T lines. The panel shall have provision for

    both top and bottom cable feeding. The

    conductors in the swivel stub and splice chamber

    shal l have 24 AWG conductors and satisfy the

    fuse link requirement. 5 Nos. test cards shall also

    be provided.

    1.1 50 pair protector panel 1.00 no 1,000.00 1,000.00

    11.2 Supply and installation, testing and commissioningfollowing size KRONE make telephone tag block in

    lockable 16 gauge sheet steel enclosure complete

    as required.

    11.2.1 10 pair Krone type tag block 1.00 no 250.00 250.00

    11.2.2 20 pair Krone type tag block1.00 no 500.00 500.00

    11.2.3 50 pair Krone type tag block 2.00 no 1,500.00 3,000.00

    Supply, installat ion, connection, testing and

    11.1 PVC & HDPE Conduits

    11.1.1 Supply & laying of 25 mm dia. rigid PVC conduit of

    2.0-2.2 mm thick heavy gauge with all accessories.

    1,600.00 mtr 42.00 67,200.00

    11.1.2 Supply & laying of 40 mm dia. rigid PVC conduit of

    2.1 -2.3 mm thick medium gauge with all

    accessories. 200.00 mtr 90.00 18,000.0011.1.3 Providing and laying the following HDPE pipe of 6

    Kg/ Cm2 working pressure laid in ground including

    cost of digging, 150 mm sand all around the pipe,

    brick protection and back filling including all

    accessories i.e. bends, reducers, flanges of

    approved make and design complete as required.

    a. 25 mm OD with 2.3 mm wall thickness 100.00 mtr 60.00 6,000.00

    11.2 Cabling

    Supply, installation, testing and commisioning

    of the following 0.51 dia Tinned Copper un

    armoured telephone cables.

    11.2.1 10 pair unarmoured telephone cablemtr 150.0011.2.2 20 pair unarmoured telephone cable mtr 250.00

    11.2.3 50 pair unarmoured telephone cable 200.00 mtr 600.00 120,000.00

    11.4 Telephone Point Wiring

    Page 31 Abstract Sheet

  • 8/10/2019 Tender Boq

    33/36

    Supply and laying of specified make 0.51 mm dia

    Tinned copper telephone wire of specified make

    to be done in prelaid PVC pipe of 25 mm

    dia/raceway of specif ied make, but without the

    cost of pipe or raceway. (the wire is to be drawn

    from Krone connector )

    11.4.1 5 pair telephone wire 1,800.00 mtr 50.00 90,000.00

    11.4.2 2 pair telephone wire 1,600.00 mtr 40.00 64,000.00

    11.4.3 Supply, installation, testing and commissioning of 4 pair Category 6 UTP cable consisting of 23

    AWG solid copper conductors and as per the

    specification. The cable should have flexible

    jacket and ripcord for easy stripability.

    100.00 mtr 40.00 4,000.00

    11.5 Telephone Outlet Point

    Supply and installation of flush mounted Category

    6 T 568 A or B outlet. The plastic shall be high

    impact, flame-retardant UL rated thermoplastic.

    Dust cover / Blank shall be provided to protect

    unused face plate openings. Termination cap and

    plastic cover shal l be provided to protect jack

    wiring.

    11.5.1 one telephone point to be done with telephone

    outlet socket RJ-11 (jack type) and box of thespecified make. 90.00 no 350.00 31,500.00

    11.5.2 one Data I/O point to be done with data outlet

    socket of RJ-45 and Face Plate, box of the

    specified make. 5.00 no 750.00 3,750.00

    Sub Total 11.0..... 409,200.00

    12.0 P. A. Syatem

    12.1 SITC of 4 channel hi-fi music playing system (2-

    cassette playing facility, Auto-reverse, recording

    facility) with 3-CD changer, amplifier, including

    mounting rack. The music system should have

    facility to receive & broadcast the automatic

    emergency fire alarm anouncements generated by

    Fire alarm control panel & should be capable to

    connect with the EPABX system for

    announcement purpose. These fire alarm

    anouncements should override the ongoing music

    playback. (Philips / Bosch make).

    1.00 no 15,000.00 15,000.00

    12.2 SITC of 6W- 8 ohms 6" dia ceiling mounted music

    speakers with line matching transformer for 100/70

    V output line, with bottom grill. (Philips make LDB

    8353 + B377or equivalent from specified

    make).(Philips / Bosch make)

    5.00 no 750.00 3,750.00

    12.3 SITC of 6W- 8 ohms wall mounted Projection

    music speakers with line matching transformer for

    100/70 V output line. (Philips / Bosch make)

    10.00 no 1,000.00 10,000.00

    12.4 SITC OF microphone with press to call switch for Public address system, (Philips / Bosch make)

    1.00 no 1,500.00 1,500.00

    12.5 SITC of local volume control -cum ON-OFF switch

    with flush mounting metal boxes, mounting plate

    matching with electrical switches (Same make as

    switch) 1.00 no 350.00 350.00

    12.6 Supply & Laying of 2 Core X 1sq.mm Shielded

    wire with 25 mm dia PVC Pipe With all

    accessories. ( For Fire & P.A. ) 150.00 mtr 40.00 6,000.00

    Page 32 Abstract Sheet

  • 8/10/2019 Tender Boq

    34/36

    12.7 Supply & Laying of RG 6 TV wire with PVC Pipe

    With all accessories. 1,100.00 mtr 40.00 44,000.00

    12.8 SITC of the TV Socket with with the Concealed

    box, Face plate etc 85.00 no 350.00 29,750.00

    12.9 SITC of the 4 way Splitter 10.00 no 500.00 5,000.00

    Sub Total 12.0.. 115,350.00

    13 Street Lighting

    13.1 Supply & installation of 11Mtr (Approx 36') high

    (coloured and primered in minimum 2 coats of PU

    based paint in approved colour and shade) madeout of M.S. tubular pole of dia 194 mm top swaged

    with base plate with stiffner, primered and painted

    street light pole The column shall also be provided

    with flush door at the bottom with proper

    strengthening to the cutout of the door opening. A

    junction/ looping box with Heavy duty 3 phase

    connector shall be built into the pole with single

    arm bracket from the 42 to 60 mm dia pipe with

    Suitable size of M.S. sleeve /reducer duly welded

    at the end of the arm, The total play should not be

    more than 10 mm as per drawing.

    11.00 no 20,000.00 220,000.00

    1) 8 way connector and 6A MCB

    2) 50 mm diameter GI pipe for each cable entry.Pipe length is up to 3.5 mtr. Per cable

    3) Wiring up to the l ight fixture from the junction

    box using 3nos x 1.5 sq.mm. flexible copper wires

    / Fixture of specified make.

    4) Concrete coping with base plate with stiffner.

    5) Sprial/Coil Type Earthing from the 8 swg Cu.

    Wire of 2.5 mtr. With the suitable size pipe with

    clamps and painting.

    6) Radium stip of two colour at suitable height

    7) Excavation & back fil ling for erection of poles.

    Debris to be removed from the site to suitable

    location as per the instruction of the engineer

    incharge

    13.2 Supply & installation of 9Mtr (Approx 31') high

    (coloured and primered in minimum 2 coats of PU

    based paint in approved colour and shade) made

    out of M.S. tubular pole of dia 194 mm top swaged 15.00 no 15,000.00 225,000.00

    Page 33 Abstract Sheet

  • 8/10/2019 Tender Boq

    35/36

    1) 8 way connector and 6A MCB

    2) 50 mm diameter GI pipe for each cable entry.

    Pipe length is up to 3.5 mtr. Per cable

    3) Wiring up to the l ight fixture from the junction

    box using 3nos x 1.5 sq.mm. flexible copper wires

    / Fixture of specified make.

    4) Concrete coping with base plate with stiffner.

    5) Sprial/Coil Type Earthing from the 8 swg Cu.

    Wire of 2.5 mtr. With the suitable size pipe with

    clamps and painting.

    6) Radium stip of two colour at suitable height

    7) Excavation & back fil ling for erection of poles.

    Debris to be removed from the site to suitable

    location as per the instruction of the engineer

    incharge

    Sub Total 13.0..... 445,000.00

    14.0 Miscellaneous

    14.1 Supplying & Erecting conventional type Carbon

    Dioxide fire extinguishers of ISI approved of 2.0

    kgs 10.00 no 2,000.00 20,000.00

    14.2 Suppplying & Erecting automatic emergency light

    with maintenance free battery for 20 watts tube.

    4.00 no 1,300.00 5,200.0014.3 Supplying & Erecting Rubber mat 1.1 KV 1000 x

    2000 x 6 mm 2.00 no 2,000.00 4,000.00

    14.4 Providing and erecting danger notice board for

    medium voltage installation to be erected as per

    I.S. The board should be 150 x 150 mm.

    4.00 no 1,500.00 6,000.00

    14.5 Providing printed instruction chart both in English

    & REGIONAL LANGUAGE & duly framed out on

    glass for treatment of person suffering from

    Electric shock. 4.00 no 1,000.00 4,000.00

    14.6 S & L only PVC medium gauge in concealed

    manner with GI pul ling wire of 25 mm dia with all

    accessories. 250.00 mtr 33.00 8,250.00

    14.7 S & L only PVC medium gauge in concealed

    manner with GI pull ing wire of 32 mm dia with allaccessories. 200.00 mtr 55.50 11,100.00

    14.8 S & L only PVC medium gauge in concealed

    manner with GI pull ing wire of 40 mm dia with all

    accessories. 100.00 mtr 81.00 8,100.00

    14.9 S & L only PVC medium gauge in concealed

    manner with GI pull ing wire of 50 mm dia with all

    accessories. 100.00 mtr 117.00 11,700.00

    14.10 Supplying , fabricating and installation of various

    sizes MS race way / junction

    boxes/clamps/hangers for Cable Tray, Light

    Fixture made out ot 14 guage

    sheet/Angle/Flat/rod/ channel etc with all

    necessary accessories like bend, juncation boxes,

    coupler, Anchor fastner, Bolt Nuts, etc.. & work

    from MS structure for other work with anchor

    fastner and necessary hardware with necessary

    welding has to be done to complete the job from

    ISA / ISMC / PLATE. The job also includes to

    paint the structure with two coats of red oxide and

    two coats color of enamel paint as approved and

    recommended by consultant. Complete in all

    respect

    500.00 Kg. 60.00 30,000.00

    Page 34 Abstract Sheet

  • 8/10/2019 Tender Boq

    36/36

    14.11 Providing & laying. Double walled corrugated

    pipes (DWC) of polyethylene(conforming to IS

    14930 II ) Anti Rodent type with necessary

    connecting accessories of same material at

    required depth for laying of cable. below ground

    / road surface for enclosing cable and backfilling

    the same to make ground as per original.

    .

    (A)50 mm dia 50.00 mt 110.00 5,500.00

    (B)90 mm dia 100.00 mt 162.00 16,200.00

    (C)120 mm dia. 800.00 mt 225.00 180,000.00

    14.12 SITC of Water Tight Junction Box of Hensel make

    Cat. No. KG9003IN or equivalent. With necessary

    clamp for mounting of the J.B. ( All the cable / wire

    connections to the JB shall be with the Water tight

    Glands only ) 30.00 no 2,000.00 60,000.00

    14.13 Liason / Follow UP with Supply Co.

    Fill ing the necessary application to supply co.

    following up and getting the supply filling the

    necessary test report to the supply co. inclusive.

    All official fees including security deposits will be

    paid by the client and out of pocket expenses shall

    be of contractor. 1.00 Lot 40,000.00 40,000.00

    Sub Total 14.0..... 410,050.00

    Total Amount 6,370,681.00